ide: drop 'name' parameter from ->init_chipset method
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
index f6dc6c2..e0c8fe7 100644
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -140,7 +140,7 @@
drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
}
-static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev)
{
/* These are necessary to get AEC6280 Macintosh cards to work */
if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index a099c4d..b582687 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -209,13 +209,12 @@
/**
* init_chipset_ali15x3 - Initialise an ALi IDE controller
* @dev: PCI device
- * @name: Name of the controller
*
* This function initializes the ALI IDE controller and where
* appropriate also sets up the 1533 southbridge.
*/
-
-static unsigned int __devinit init_chipset_ali15x3 (struct pci_dev *dev, const char *name)
+
+static unsigned int __devinit init_chipset_ali15x3(struct pci_dev *dev)
{
unsigned long flags;
u8 tmpbyte;
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
index cbf78ed..2cea7bf 100644
--- a/drivers/ide/pci/amd74xx.c
+++ b/drivers/ide/pci/amd74xx.c
@@ -112,15 +112,13 @@
amd_set_drive(drive, XFER_PIO_0 + pio);
}
-static void __devinit amd7409_cable_detect(struct pci_dev *dev,
- const char *name)
+static void __devinit amd7409_cable_detect(struct pci_dev *dev)
{
/* no host side cable detection */
amd_80w = 0x03;
}
-static void __devinit amd7411_cable_detect(struct pci_dev *dev,
- const char *name)
+static void __devinit amd7411_cable_detect(struct pci_dev *dev)
{
int i;
u32 u = 0;
@@ -131,9 +129,9 @@
amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
for (i = 24; i >= 0; i -= 8)
if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING "%s %s: BIOS didn't set cable bits "
- "correctly. Enabling workaround.\n",
- name, pci_name(dev));
+ printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
+ "cable bits correctly. Enabling workaround.\n",
+ pci_name(dev));
amd_80w |= (1 << (1 - (i >> 4)));
}
}
@@ -142,8 +140,7 @@
* The initialization callback. Initialize drive independent registers.
*/
-static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
- const char *name)
+static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
{
u8 t = 0, offset = amd_offset(dev);
@@ -156,9 +153,9 @@
; /* no UDMA > 2 */
else if (dev->vendor == PCI_VENDOR_ID_AMD &&
dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
- amd7409_cable_detect(dev, name);
+ amd7409_cable_detect(dev);
else
- amd7411_cable_detect(dev, name);
+ amd7411_cable_detect(dev);
/*
* Take care of prefetch & postwrite.
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
index 3d84deb..1360b4f 100644
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -332,7 +332,7 @@
return (dma_stat & 7) != 4;
}
-static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cmd64x(struct pci_dev *dev)
{
u8 mrdmode = 0;
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
index 5543c86..f235db8 100644
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -129,12 +129,11 @@
/**
* init_chipset_5530 - set up 5530 bridge
* @dev: PCI device
- * @name: device name
*
* Initialize the cs5530 bridge for reliable IDE DMA operation.
*/
-static unsigned int __devinit init_chipset_cs5530 (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cs5530(struct pci_dev *dev)
{
struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
@@ -153,11 +152,11 @@
}
}
if (!master_0) {
- printk(KERN_ERR "%s: unable to locate PCI MASTER function\n", name);
+ printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
goto out;
}
if (!cs5530_0) {
- printk(KERN_ERR "%s: unable to locate CS5530 LEGACY function\n", name);
+ printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
goto out;
}
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
index 41c7f33..bfae2f8 100644
--- a/drivers/ide/pci/cy82c693.c
+++ b/drivers/ide/pci/cy82c693.c
@@ -332,7 +332,7 @@
/*
* this function is called during init and is used to setup the cy82c693 chip
*/
-static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_cy82c693(struct pci_dev *dev)
{
if (PCI_FUNC(dev->devfn) != 1)
return 0;
@@ -351,8 +351,8 @@
data = inb(CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s: Peripheral Configuration Register: 0x%X\n",
- name, data);
+ printk(KERN_INFO DRV_NAME ": Peripheral Configuration Register: 0x%X\n",
+ data);
#endif /* CY82C693_DEBUG_INFO */
/*
@@ -373,8 +373,8 @@
outb(data, CY82_DATA_PORT);
#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s: New Peripheral Configuration Register: 0x%X\n",
- name, data);
+ printk(KERN_INFO ": New Peripheral Configuration Register: 0x%X\n",
+ data);
#endif /* CY82C693_DEBUG_INFO */
#endif /* CY82C693_SETDMA_CLOCK */
diff --git a/drivers/ide/pci/hpt34x.c b/drivers/ide/pci/hpt34x.c
index baabb4c..6009b0b 100644
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -79,7 +79,7 @@
*/
#define HPT34X_PCI_INIT_REG 0x80
-static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt34x(struct pci_dev *dev)
{
int i = 0;
unsigned long hpt34xIoBase = pci_resource_start(dev, 4);
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
index 6a1c65c..5271b24 100644
--- a/drivers/ide/pci/hpt366.c
+++ b/drivers/ide/pci/hpt366.c
@@ -970,11 +970,12 @@
return 1;
}
-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev)
{
unsigned long io_base = pci_resource_start(dev, 4);
struct ide_host *host = pci_get_drvdata(dev);
struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
+ const char *name = DRV_NAME;
u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
u8 chip_type;
enum ata_clock clock;
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
index 7417335..e16a1d1 100644
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -605,7 +605,7 @@
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
}
-static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_it821x(struct pci_dev *dev)
{
u8 conf;
static char *mode[2] = { "pass through", "smart" };
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
index 1f67919..998615f 100644
--- a/drivers/ide/pci/pdc202xx_new.c
+++ b/drivers/ide/pci/pdc202xx_new.c
@@ -326,8 +326,9 @@
}
#endif /* CONFIG_PPC_PMAC */
-static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_pdcnew(struct pci_dev *dev)
{
+ const char *name = DRV_NAME;
unsigned long dma_base = pci_resource_start(dev, 4);
unsigned long sec_dma_base = dma_base + 0x08;
long pll_input, pll_output, ratio;
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
index da92d12..6ff2def 100644
--- a/drivers/ide/pci/pdc202xx_old.c
+++ b/drivers/ide/pci/pdc202xx_old.c
@@ -265,8 +265,7 @@
ide_dma_timeout(drive);
}
-static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
- const char *name)
+static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev)
{
unsigned long dmabase = pci_resource_start(dev, 4);
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
index 9eb411f5c..7fc3022 100644
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -200,13 +200,12 @@
/**
* init_chipset_ich - set up the ICH chipset
* @dev: PCI device to set up
- * @name: Name of the device
*
* Initialize the PCI device as required. For the ICH this turns
* out to be nice and simple.
*/
-static unsigned int __devinit init_chipset_ich(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_ich(struct pci_dev *dev)
{
u32 extra = 0;
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
index e26bc83..d173f29 100644
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -174,7 +174,7 @@
pci_write_config_byte(dev, 0x54, ultra_enable);
}
-static unsigned int __devinit init_chipset_svwks (struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_svwks(struct pci_dev *dev)
{
unsigned int reg;
u8 btr;
@@ -190,8 +190,8 @@
pci_read_config_dword(isa_dev, 0x64, ®);
reg &= ~0x00002000; /* disable 600ns interrupt mask */
if(!(reg & 0x00004000))
- printk(KERN_DEBUG "%s %s: UDMA not BIOS "
- "enabled.\n", name, pci_name(dev));
+ printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
+ "enabled.\n", pci_name(dev));
reg |= 0x00004000; /* enable UDMA/33 support */
pci_write_config_dword(isa_dev, 0x64, reg);
}
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
index 572b479..b8ad9ad 100644
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -457,14 +457,12 @@
/**
* init_chipset_siimage - set up an SI device
* @dev: PCI device
- * @name: device name
*
* Perform the initial PCI set up for this device. Attempt to switch
* to 133 MHz clocking if the system isn't already set up to do it.
*/
-static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev,
- const char *name)
+static unsigned int __devinit init_chipset_siimage(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
void __iomem *ioaddr = host->host_priv;
@@ -541,8 +539,8 @@
{ "== 100", "== 133", "== 2X PCI", "DISABLED!" };
tmp >>= 4;
- printk(KERN_INFO "%s %s: BASE CLOCK %s\n",
- name, pci_name(dev), clk_str[tmp & 3]);
+ printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
+ pci_name(dev), clk_str[tmp & 3]);
}
return 0;
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 6fcb46c..cc95f90 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -448,8 +448,7 @@
return chipset_family;
}
-static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev,
- const char *name)
+static unsigned int __devinit init_chipset_sis5513(struct pci_dev *dev)
{
/* Make general config ops here
1/ tell IDE channels to operate in Compatibility mode only
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
index fa720db..73905bc 100644
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -272,7 +272,7 @@
* channel 0 here at least, but channel 1 has to be enabled by
* firmware or arch code. We still set both to 16 bits mode.
*/
-static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev, const char *msg)
+static unsigned int __devinit init_chipset_sl82c105(struct pci_dev *dev)
{
u32 val;
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
index 170e058..454d2bf 100644
--- a/drivers/ide/pci/via82cxxx.c
+++ b/drivers/ide/pci/via82cxxx.c
@@ -262,13 +262,12 @@
/**
* init_chipset_via82cxxx - initialization handler
* @dev: PCI device
- * @name: Name of interface
*
* The initialization callback. Here we determine the IDE chip type
* and initialize its drive independent registers.
*/
-static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+static unsigned int __devinit init_chipset_via82cxxx(struct pci_dev *dev)
{
struct ide_host *host = pci_get_drvdata(dev);
struct via82cxxx_dev *vdev = host->host_priv;