[media] af9015: switch to new DVB-USB
Almost all hacks are now removed and much less code.
Reducing af9015 driver code from 2084 to 1609, it is almost
500 LOC less!
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index 677fed7..fe5ef3a 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -21,18 +21,7 @@
*
*/
-#include <linux/hash.h>
-#include <linux/slab.h>
-
#include "af9015.h"
-#include "af9013.h"
-#include "mt2060.h"
-#include "qt1010.h"
-#include "tda18271.h"
-#include "mxl5005s.h"
-#include "mc44s803.h"
-#include "tda18218.h"
-#include "mxl5007t.h"
static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -42,44 +31,18 @@
MODULE_PARM_DESC(remote, "select remote");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-static DEFINE_MUTEX(af9015_usb_mutex);
-
-static struct af9015_config af9015_config;
-static struct dvb_usb_device_properties af9015_properties[3];
-static int af9015_properties_count = ARRAY_SIZE(af9015_properties);
-
-static struct af9013_config af9015_af9013_config[] = {
- {
- .i2c_addr = AF9015_I2C_DEMOD,
- .ts_mode = AF9013_TS_USB,
- .api_version = { 0, 1, 9, 0 },
- .gpio[0] = AF9013_GPIO_HI,
- .gpio[3] = AF9013_GPIO_TUNER_ON,
-
- }, {
- .ts_mode = AF9013_TS_SERIAL,
- .api_version = { 0, 1, 9, 0 },
- .gpio[0] = AF9013_GPIO_TUNER_ON,
- .gpio[1] = AF9013_GPIO_LO,
- }
-};
-
-static int af9015_rw_udev(struct usb_device *udev, struct req_t *req)
+static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
{
#define BUF_LEN 63
#define REQ_HDR_LEN 8 /* send header size */
#define ACK_HDR_LEN 2 /* rece header size */
- int act_len, ret;
+ struct af9015_state *state = d->priv;
+ int ret, wlen, rlen;
u8 buf[BUF_LEN];
u8 write = 1;
- u8 msg_len = REQ_HDR_LEN;
- static u8 seq; /* packet sequence number */
-
- if (mutex_lock_interruptible(&af9015_usb_mutex) < 0)
- return -EAGAIN;
buf[0] = req->cmd;
- buf[1] = seq++;
+ buf[1] = state->seq++;
buf[2] = req->i2c_addr;
buf[3] = req->addr >> 8;
buf[4] = req->addr & 0xff;
@@ -111,7 +74,7 @@
default:
err("unknown command:%d", req->cmd);
ret = -1;
- goto error_unlock;
+ goto error;
}
/* buffer overflow check */
@@ -119,73 +82,42 @@
(!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
err("too much data; cmd:%d len:%d", req->cmd, req->data_len);
ret = -EINVAL;
- goto error_unlock;
+ goto error;
}
- /* write requested */
- if (write) {
- memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
- msg_len += req->data_len;
- }
-
- deb_xfer(">>> ");
- debug_dump(buf, msg_len, deb_xfer);
-
- /* send req */
- ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 0x02), buf, msg_len,
- &act_len, AF9015_USB_TIMEOUT);
- if (ret)
- err("bulk message failed:%d (%d/%d)", ret, msg_len, act_len);
- else
- if (act_len != msg_len)
- ret = -1; /* all data is not send */
- if (ret)
- goto error_unlock;
-
- /* no ack for those packets */
- if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
- goto exit_unlock;
-
/* write receives seq + status = 2 bytes
read receives seq + status + data = 2 + N bytes */
- msg_len = ACK_HDR_LEN;
- if (!write)
- msg_len += req->data_len;
-
- ret = usb_bulk_msg(udev, usb_rcvbulkpipe(udev, 0x81), buf, msg_len,
- &act_len, AF9015_USB_TIMEOUT);
- if (ret) {
- err("recv bulk message failed:%d", ret);
- ret = -1;
- goto error_unlock;
+ wlen = REQ_HDR_LEN;
+ rlen = ACK_HDR_LEN;
+ if (write) {
+ wlen += req->data_len;
+ memcpy(&buf[REQ_HDR_LEN], req->data, req->data_len);
+ } else {
+ rlen += req->data_len;
}
- deb_xfer("<<< ");
- debug_dump(buf, act_len, deb_xfer);
+ /* no ack for these packets */
+ if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
+ rlen = 0;
+
+ ret = dvb_usbv2_generic_rw(d, buf, wlen, buf, rlen, 0);
+ if (ret)
+ goto error;
/* check status */
- if (buf[1]) {
+ if (rlen && buf[1]) {
err("command failed:%d", buf[1]);
ret = -1;
- goto error_unlock;
+ goto error;
}
/* read request, copy returned data to return buf */
if (!write)
memcpy(req->data, &buf[ACK_HDR_LEN], req->data_len);
-
-error_unlock:
-exit_unlock:
- mutex_unlock(&af9015_usb_mutex);
-
+error:
return ret;
}
-static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
-{
- return af9015_rw_udev(d->udev, req);
-}
-
static int af9015_write_regs(struct dvb_usb_device *d, u16 addr, u8 *val,
u8 len)
{
@@ -194,11 +126,6 @@
return af9015_ctrl_msg(d, &req);
}
-static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
-{
- return af9015_write_regs(d, addr, &val, 1);
-}
-
static int af9015_read_regs(struct dvb_usb_device *d, u16 addr, u8 *val, u8 len)
{
struct req_t req = {READ_MEMORY, AF9015_I2C_DEMOD, addr, 0, 0, len,
@@ -206,6 +133,11 @@
return af9015_ctrl_msg(d, &req);
}
+static int af9015_write_reg(struct dvb_usb_device *d, u16 addr, u8 val)
+{
+ return af9015_write_regs(d, addr, &val, 1);
+}
+
static int af9015_read_reg(struct dvb_usb_device *d, u16 addr, u8 *val)
{
return af9015_read_regs(d, addr, val, 1);
@@ -214,10 +146,11 @@
static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 val)
{
+ struct af9015_state *state = d->priv;
struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
- if (addr == af9015_af9013_config[0].i2c_addr ||
- addr == af9015_af9013_config[1].i2c_addr)
+ if (addr == state->af9013_config[0].i2c_addr ||
+ addr == state->af9013_config[1].i2c_addr)
req.addr_len = 3;
return af9015_ctrl_msg(d, &req);
@@ -226,19 +159,53 @@
static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
u8 *val)
{
+ struct af9015_state *state = d->priv;
struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
- if (addr == af9015_af9013_config[0].i2c_addr ||
- addr == af9015_af9013_config[1].i2c_addr)
+ if (addr == state->af9013_config[0].i2c_addr ||
+ addr == state->af9013_config[1].i2c_addr)
req.addr_len = 3;
return af9015_ctrl_msg(d, &req);
}
+static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
+{
+ int ret;
+ u8 val, mask = 0x01;
+
+ ret = af9015_read_reg(d, addr, &val);
+ if (ret)
+ return ret;
+
+ mask <<= bit;
+ if (op) {
+ /* set bit */
+ val |= mask;
+ } else {
+ /* clear bit */
+ mask ^= 0xff;
+ val &= mask;
+ }
+
+ return af9015_write_reg(d, addr, val);
+}
+
+static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
+{
+ return af9015_do_reg_bit(d, addr, bit, 1);
+}
+
+static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
+{
+ return af9015_do_reg_bit(d, addr, bit, 0);
+}
+
static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct af9015_state *state = d->priv;
int ret = 0, i = 0;
u16 addr;
u8 uninitialized_var(mbox), addr_len;
@@ -270,8 +237,8 @@
return -EAGAIN;
while (i < num) {
- if (msg[i].addr == af9015_af9013_config[0].i2c_addr ||
- msg[i].addr == af9015_af9013_config[1].i2c_addr) {
+ if (msg[i].addr == state->af9013_config[0].i2c_addr ||
+ msg[i].addr == state->af9013_config[1].i2c_addr) {
addr = msg[i].buf[0] << 8;
addr += msg[i].buf[1];
mbox = msg[i].buf[2];
@@ -287,7 +254,7 @@
ret = -EOPNOTSUPP;
goto error;
}
- if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
+ if (msg[i].addr == state->af9013_config[0].i2c_addr)
req.cmd = READ_MEMORY;
else
req.cmd = READ_I2C;
@@ -304,8 +271,7 @@
ret = -EOPNOTSUPP;
goto error;
}
- if (msg[i].addr ==
- af9015_af9013_config[0].i2c_addr) {
+ if (msg[i].addr == state->af9013_config[0].i2c_addr) {
ret = -EINVAL;
goto error;
}
@@ -323,7 +289,7 @@
ret = -EOPNOTSUPP;
goto error;
}
- if (msg[i].addr == af9015_af9013_config[0].i2c_addr)
+ if (msg[i].addr == state->af9013_config[0].i2c_addr)
req.cmd = WRITE_MEMORY;
else
req.cmd = WRITE_I2C;
@@ -358,137 +324,419 @@
.functionality = af9015_i2c_func,
};
-static int af9015_do_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit, u8 op)
+static int af9015_identify_state(struct dvb_usb_device *d)
{
int ret;
- u8 val, mask = 0x01;
+ u8 reply;
+ struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
- ret = af9015_read_reg(d, addr, &val);
+ ret = af9015_ctrl_msg(d, &req);
if (ret)
return ret;
- mask <<= bit;
- if (op) {
- /* set bit */
- val |= mask;
- } else {
- /* clear bit */
- mask ^= 0xff;
- val &= mask;
- }
-
- return af9015_write_reg(d, addr, val);
-}
-
-static int af9015_set_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
- return af9015_do_reg_bit(d, addr, bit, 1);
-}
-
-static int af9015_clear_reg_bit(struct dvb_usb_device *d, u16 addr, u8 bit)
-{
- return af9015_do_reg_bit(d, addr, bit, 0);
-}
-
-static int af9015_init_endpoint(struct dvb_usb_device *d)
-{
- int ret;
- u16 frame_size;
- u8 packet_size;
- deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
-
- /* Windows driver uses packet count 21 for USB1.1 and 348 for USB2.0.
- We use smaller - about 1/4 from the original, 5 and 87. */
-#define TS_PACKET_SIZE 188
-
-#define TS_USB20_PACKET_COUNT 87
-#define TS_USB20_FRAME_SIZE (TS_PACKET_SIZE*TS_USB20_PACKET_COUNT)
-
-#define TS_USB11_PACKET_COUNT 5
-#define TS_USB11_FRAME_SIZE (TS_PACKET_SIZE*TS_USB11_PACKET_COUNT)
-
-#define TS_USB20_MAX_PACKET_SIZE 512
-#define TS_USB11_MAX_PACKET_SIZE 64
-
- if (d->udev->speed == USB_SPEED_FULL) {
- frame_size = TS_USB11_FRAME_SIZE/4;
- packet_size = TS_USB11_MAX_PACKET_SIZE/4;
- } else {
- frame_size = TS_USB20_FRAME_SIZE/4;
- packet_size = TS_USB20_MAX_PACKET_SIZE/4;
- }
-
- ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
- if (ret)
- goto error;
- ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
- if (ret)
- goto error;
- ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
- if (ret)
- goto error;
- ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
- if (ret)
- goto error;
- ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
- if (ret)
- goto error;
- if (af9015_config.dual_mode) {
- ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
- if (ret)
- goto error;
- }
- ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
- if (ret)
- goto error;
- if (af9015_config.dual_mode) {
- ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
- if (ret)
- goto error;
- }
- /* EP4 xfer length */
- ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
- if (ret)
- goto error;
- ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
- if (ret)
- goto error;
- /* EP5 xfer length */
- ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
- if (ret)
- goto error;
- ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
- if (ret)
- goto error;
- ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
- if (ret)
- goto error;
- ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
- if (ret)
- goto error;
- ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
- if (ret)
- goto error;
- if (af9015_config.dual_mode) {
- ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
- if (ret)
- goto error;
- }
-
- /* enable / disable mp2if2 */
- if (af9015_config.dual_mode)
- ret = af9015_set_reg_bit(d, 0xd50b, 0);
+ deb_info("%s: reply:%02x\n", __func__, reply);
+ if (reply == 0x02)
+ ret = WARM;
else
- ret = af9015_clear_reg_bit(d, 0xd50b, 0);
+ ret = COLD;
+
+ return ret;
+}
+
+static int af9015_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ struct af9015_state *state = d->priv;
+ int i, len, remaining, ret;
+ struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
+ u16 checksum = 0;
+
+ deb_info("%s:\n", __func__);
+
+ /* calc checksum */
+ for (i = 0; i < fw->size; i++)
+ checksum += fw->data[i];
+
+ state->firmware_size = fw->size;
+ state->firmware_checksum = checksum;
+
+ #define FW_ADDR 0x5100 /* firmware start address */
+ #define LEN_MAX 55 /* max packet size */
+ for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
+ len = remaining;
+ if (len > LEN_MAX)
+ len = LEN_MAX;
+
+ req.data_len = len;
+ req.data = (u8 *) &fw->data[fw->size - remaining];
+ req.addr = FW_ADDR + fw->size - remaining;
+
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret) {
+ err("firmware download failed:%d", ret);
+ goto error;
+ }
+ }
+
+ /* firmware loaded, request boot */
+ req.cmd = BOOT;
+ req.data_len = 0;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret) {
+ err("firmware boot failed:%d", ret);
+ goto error;
+ }
+
+error:
+ return ret;
+}
+
+/* hash (and dump) eeprom */
+static int af9015_eeprom_hash(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ int ret;
+ static const unsigned int eeprom_size = 256;
+ unsigned int reg;
+ u8 val, *eeprom;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+
+ eeprom = kmalloc(eeprom_size, GFP_KERNEL);
+ if (eeprom == NULL)
+ return -ENOMEM;
+
+ for (reg = 0; reg < eeprom_size; reg++) {
+ req.addr = reg;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto free;
+
+ eeprom[reg] = val;
+ }
+
+ if (dvb_usb_af9015_debug & 0x01)
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
+ eeprom_size);
+
+ BUG_ON(eeprom_size % 4);
+
+ state->eeprom_sum = 0;
+ for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
+ state->eeprom_sum *= GOLDEN_RATIO_PRIME_32;
+ state->eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
+ }
+
+ deb_info("%s: eeprom sum=%.8x\n", __func__, state->eeprom_sum);
+
+ ret = 0;
+free:
+ kfree(eeprom);
+ return ret;
+}
+
+static int af9015_read_config(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ int ret;
+ u8 val, i, offset = 0;
+ struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
+
+ deb_info("%s:\n", __func__);
+
+ /* IR remote controller */
+ req.addr = AF9015_EEPROM_IR_MODE;
+ /* first message will timeout often due to possible hw bug */
+ for (i = 0; i < 4; i++) {
+ ret = af9015_ctrl_msg(d, &req);
+ if (!ret)
+ break;
+ }
+ if (ret)
+ goto error;
+
+ ret = af9015_eeprom_hash(d);
+ if (ret)
+ goto error;
+
+ deb_info("%s: IR mode=%d\n", __func__, val);
+ state->ir_mode = val;
+
+ /* TS mode - one or two receivers */
+ req.addr = AF9015_EEPROM_TS_MODE;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->dual_mode = val;
+ deb_info("%s: TS mode=%d\n", __func__, state->dual_mode);
+
+ /* disable 2nd adapter because we don't have PID-filters */
+ if (d->udev->speed == USB_SPEED_FULL)
+ state->dual_mode = 0;
+
+ if (state->dual_mode) {
+ /* read 2nd demodulator I2C address */
+ req.addr = AF9015_EEPROM_DEMOD2_I2C;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[1].i2c_addr = val;
+ }
+
+ for (i = 0; i < state->dual_mode + 1; i++) {
+ if (i == 1)
+ offset = AF9015_EEPROM_OFFSET;
+ /* xtal */
+ req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ switch (val) {
+ case 0:
+ state->af9013_config[i].clock = 28800000;
+ break;
+ case 1:
+ state->af9013_config[i].clock = 20480000;
+ break;
+ case 2:
+ state->af9013_config[i].clock = 28000000;
+ break;
+ case 3:
+ state->af9013_config[i].clock = 25000000;
+ break;
+ };
+ deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
+ val, state->af9013_config[i].clock);
+
+ /* IF frequency */
+ req.addr = AF9015_EEPROM_IF1H + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[i].if_frequency = val << 8;
+
+ req.addr = AF9015_EEPROM_IF1L + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+
+ state->af9013_config[i].if_frequency += val;
+ state->af9013_config[i].if_frequency *= 1000;
+ deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
+ state->af9013_config[i].if_frequency);
+
+ /* MT2060 IF1 */
+ req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ state->mt2060_if1[i] = val << 8;
+ req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ state->mt2060_if1[i] += val;
+ deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
+ state->mt2060_if1[i]);
+
+ /* tuner */
+ req.addr = AF9015_EEPROM_TUNER_ID1 + offset;
+ ret = af9015_ctrl_msg(d, &req);
+ if (ret)
+ goto error;
+ switch (val) {
+ case AF9013_TUNER_ENV77H11D5:
+ case AF9013_TUNER_MT2060:
+ case AF9013_TUNER_QT1010:
+ case AF9013_TUNER_UNKNOWN:
+ case AF9013_TUNER_MT2060_2:
+ case AF9013_TUNER_TDA18271:
+ case AF9013_TUNER_QT1010A:
+ case AF9013_TUNER_TDA18218:
+ state->af9013_config[i].spec_inv = 1;
+ break;
+ case AF9013_TUNER_MXL5003D:
+ case AF9013_TUNER_MXL5005D:
+ case AF9013_TUNER_MXL5005R:
+ case AF9013_TUNER_MXL5007T:
+ state->af9013_config[i].spec_inv = 0;
+ break;
+ case AF9013_TUNER_MC44S803:
+ state->af9013_config[i].gpio[1] = AF9013_GPIO_LO;
+ state->af9013_config[i].spec_inv = 1;
+ break;
+ default:
+ warn("tuner id=%d not supported, please report!", val);
+ return -ENODEV;
+ };
+
+ state->af9013_config[i].tuner = val;
+ deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
+ }
error:
if (ret)
- err("endpoint init failed:%d", ret);
+ err("eeprom read failed=%d", ret);
+
+ /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
+ content :-( Override some wrong values here. Ditto for the
+ AVerTV Red HD+ (A850T) device. */
+ if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
+ ((le16_to_cpu(d->udev->descriptor.idProduct) ==
+ USB_PID_AVERMEDIA_A850) ||
+ (le16_to_cpu(d->udev->descriptor.idProduct) ==
+ USB_PID_AVERMEDIA_A850T))) {
+ deb_info("%s: AverMedia A850: overriding config\n", __func__);
+ /* disable dual mode */
+ state->dual_mode = 0;
+
+ /* set correct IF */
+ state->af9013_config[0].if_frequency = 4570000;
+ }
+
+ return ret;
+}
+
+static int af9015_get_usb_stream_config(struct dvb_frontend *fe,
+ struct usb_data_stream_properties *stream)
+{
+ struct dvb_usb_adapter *adap;
+
+ deb_info("%s: fe=%p\n", __func__, fe);
+
+ stream->type = USB_BULK;
+ stream->count = 8;
+ stream->endpoint = 0x84;
+ stream->u.bulk.buffersize = TS_USB20_FRAME_SIZE;
+
+ if (fe == NULL)
+ return 0;
+
+ adap = fe->dvb->priv;
+
+ if (adap->id == 1)
+ stream->endpoint = 0x85;
+
+ if (adap->dev->udev->speed == USB_SPEED_FULL)
+ stream->u.bulk.buffersize = TS_USB11_FRAME_SIZE;
+
+ return 0;
+}
+
+static int af9015_get_adapter_count(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ return state->dual_mode + 1;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->set_frontend[adap->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_read_status(struct dvb_frontend *fe,
+ fe_status_t *status)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->read_status[adap->id](fe, status);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_init(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->init[adap->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override demod callbacks for resource locking */
+static int af9015_af9013_sleep(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->sleep[adap->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_init(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->tuner_init[adap->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
+ return ret;
+}
+
+/* override tuner callbacks for resource locking */
+static int af9015_tuner_sleep(struct dvb_frontend *fe)
+{
+ int ret;
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct af9015_state *state = adap->dev->priv;
+
+ if (mutex_lock_interruptible(&state->fe_mutex))
+ return -EAGAIN;
+
+ ret = state->tuner_sleep[adap->id](fe);
+
+ mutex_unlock(&state->fe_mutex);
+
return ret;
}
static int af9015_copy_firmware(struct dvb_usb_device *d)
{
+ struct af9015_state *state = d->priv;
int ret;
u8 fw_params[4];
u8 val, i;
@@ -496,16 +744,16 @@
fw_params };
deb_info("%s:\n", __func__);
- fw_params[0] = af9015_config.firmware_size >> 8;
- fw_params[1] = af9015_config.firmware_size & 0xff;
- fw_params[2] = af9015_config.firmware_checksum >> 8;
- fw_params[3] = af9015_config.firmware_checksum & 0xff;
+ fw_params[0] = state->firmware_size >> 8;
+ fw_params[1] = state->firmware_size & 0xff;
+ fw_params[2] = state->firmware_checksum >> 8;
+ fw_params[3] = state->firmware_checksum & 0xff;
/* wait 2nd demodulator ready */
msleep(100);
- ret = af9015_read_reg_i2c(d,
- af9015_af9013_config[1].i2c_addr, 0x98be, &val);
+ ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0x98be, &val);
if (ret)
goto error;
else
@@ -533,8 +781,8 @@
goto error;
/* request boot firmware */
- ret = af9015_write_reg_i2c(d, af9015_af9013_config[1].i2c_addr,
- 0xe205, 1);
+ ret = af9015_write_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0xe205, 1);
deb_info("%s: firmware boot cmd status:%d\n", __func__, ret);
if (ret)
goto error;
@@ -543,8 +791,8 @@
msleep(100);
/* check firmware status */
- ret = af9015_read_reg_i2c(d,
- af9015_af9013_config[1].i2c_addr, 0x98be, &val);
+ ret = af9015_read_reg_i2c(d, state->af9013_config[1].i2c_addr,
+ 0x98be, &val);
deb_info("%s: firmware status cmd status:%d fw status:%02x\n",
__func__, ret, val);
if (ret)
@@ -567,650 +815,29 @@
return ret;
}
-/* hash (and dump) eeprom */
-static int af9015_eeprom_hash(struct usb_device *udev)
-{
- static const unsigned int eeprom_size = 256;
- unsigned int reg;
- int ret;
- u8 val, *eeprom;
- struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
- eeprom = kmalloc(eeprom_size, GFP_KERNEL);
- if (eeprom == NULL)
- return -ENOMEM;
-
- for (reg = 0; reg < eeprom_size; reg++) {
- req.addr = reg;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto free;
- eeprom[reg] = val;
- }
-
- if (dvb_usb_af9015_debug & 0x01)
- print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, eeprom,
- eeprom_size);
-
- BUG_ON(eeprom_size % 4);
-
- af9015_config.eeprom_sum = 0;
- for (reg = 0; reg < eeprom_size / sizeof(u32); reg++) {
- af9015_config.eeprom_sum *= GOLDEN_RATIO_PRIME_32;
- af9015_config.eeprom_sum += le32_to_cpu(((u32 *)eeprom)[reg]);
- }
-
- deb_info("%s: eeprom sum=%.8x\n", __func__, af9015_config.eeprom_sum);
-
- ret = 0;
-free:
- kfree(eeprom);
- return ret;
-}
-
-static int af9015_init(struct dvb_usb_device *d)
-{
- int ret;
- deb_info("%s:\n", __func__);
-
- /* init RC canary */
- ret = af9015_write_reg(d, 0x98e9, 0xff);
- if (ret)
- goto error;
-
- ret = af9015_init_endpoint(d);
- if (ret)
- goto error;
-
-error:
- return ret;
-}
-
-static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
- int ret;
- deb_info("%s: onoff:%d\n", __func__, onoff);
-
- if (onoff)
- ret = af9015_set_reg_bit(adap->dev, 0xd503, 0);
- else
- ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0);
-
- return ret;
-}
-
-static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
- int onoff)
-{
- int ret;
- u8 idx;
-
- deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n",
- __func__, index, pid, onoff);
-
- ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff));
- if (ret)
- goto error;
-
- ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8));
- if (ret)
- goto error;
-
- idx = ((index & 0x1f) | (1 << 5));
- ret = af9015_write_reg(adap->dev, 0xd504, idx);
-
-error:
- return ret;
-}
-
-static int af9015_download_firmware(struct usb_device *udev,
- const struct firmware *fw)
-{
- int i, len, remaining, ret;
- struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
- u16 checksum = 0;
-
- deb_info("%s:\n", __func__);
-
- /* calc checksum */
- for (i = 0; i < fw->size; i++)
- checksum += fw->data[i];
-
- af9015_config.firmware_size = fw->size;
- af9015_config.firmware_checksum = checksum;
-
- #define FW_ADDR 0x5100 /* firmware start address */
- #define LEN_MAX 55 /* max packet size */
- for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) {
- len = remaining;
- if (len > LEN_MAX)
- len = LEN_MAX;
-
- req.data_len = len;
- req.data = (u8 *) &fw->data[fw->size - remaining];
- req.addr = FW_ADDR + fw->size - remaining;
-
- ret = af9015_rw_udev(udev, &req);
- if (ret) {
- err("firmware download failed:%d", ret);
- goto error;
- }
- }
-
- /* firmware loaded, request boot */
- req.cmd = BOOT;
- ret = af9015_rw_udev(udev, &req);
- if (ret) {
- err("firmware boot failed:%d", ret);
- goto error;
- }
-
-error:
- return ret;
-}
-
-struct af9015_rc_setup {
- unsigned int id;
- char *rc_codes;
-};
-
-static char *af9015_rc_setup_match(unsigned int id,
- const struct af9015_rc_setup *table)
-{
- for (; table->rc_codes; table++)
- if (table->id == id)
- return table->rc_codes;
- return NULL;
-}
-
-static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
- { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
- { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
- { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
- { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
- { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
- { }
-};
-
-static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
- { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
- { 0xa3703d00, RC_MAP_ALINK_DTU_M },
- { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
- { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
- { }
-};
-
-static const struct af9015_rc_setup af9015_rc_setup_usbids[] = {
- { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_RC,
- RC_MAP_TERRATEC_SLIM_2 },
- { (USB_VID_TERRATEC << 16) | USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
- RC_MAP_TERRATEC_SLIM },
- { (USB_VID_VISIONPLUS << 16) | USB_PID_AZUREWAVE_AD_TU700,
- RC_MAP_AZUREWAVE_AD_TU700 },
- { (USB_VID_VISIONPLUS << 16) | USB_PID_TINYTWIN,
- RC_MAP_AZUREWAVE_AD_TU700 },
- { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGI_VOX_MINI_III,
- RC_MAP_MSI_DIGIVOX_III },
- { (USB_VID_MSI_2 << 16) | USB_PID_MSI_DIGIVOX_DUO,
- RC_MAP_MSI_DIGIVOX_III },
- { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV_DONGLE_GOLD,
- RC_MAP_LEADTEK_Y04G0051 },
- { (USB_VID_LEADTEK << 16) | USB_PID_WINFAST_DTV2000DS,
- RC_MAP_LEADTEK_Y04G0051 },
- { (USB_VID_AVERMEDIA << 16) | USB_PID_AVERMEDIA_VOLAR_X,
- RC_MAP_AVERMEDIA_M135A },
- { (USB_VID_AFATECH << 16) | USB_PID_TREKSTOR_DVBT,
- RC_MAP_TREKSTOR },
- { (USB_VID_KWORLD_2 << 16) | USB_PID_TINYTWIN_2,
- RC_MAP_DIGITALNOW_TINYTWIN },
- { (USB_VID_GTEK << 16) | USB_PID_TINYTWIN_3,
- RC_MAP_DIGITALNOW_TINYTWIN },
- { (USB_VID_KWORLD_2 << 16) | USB_PID_SVEON_STV22,
- RC_MAP_MSI_DIGIVOX_III },
- { }
-};
-
-static void af9015_set_remote_config(struct usb_device *udev,
- struct dvb_usb_device_properties *props)
-{
- u16 vid = le16_to_cpu(udev->descriptor.idVendor);
- u16 pid = le16_to_cpu(udev->descriptor.idProduct);
-
- /* try to load remote based module param */
- props->rc.core.rc_codes = af9015_rc_setup_match(
- dvb_usb_af9015_remote, af9015_rc_setup_modparam);
-
- /* try to load remote based eeprom hash */
- if (!props->rc.core.rc_codes)
- props->rc.core.rc_codes = af9015_rc_setup_match(
- af9015_config.eeprom_sum, af9015_rc_setup_hashes);
-
- /* try to load remote based USB ID */
- if (!props->rc.core.rc_codes)
- props->rc.core.rc_codes = af9015_rc_setup_match(
- (vid << 16) | pid, af9015_rc_setup_usbids);
-
- /* try to load remote based USB iManufacturer string */
- if (!props->rc.core.rc_codes && vid == USB_VID_AFATECH) {
- /* Check USB manufacturer and product strings and try
- to determine correct remote in case of chip vendor
- reference IDs are used.
- DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */
- char manufacturer[10];
- memset(manufacturer, 0, sizeof(manufacturer));
- usb_string(udev, udev->descriptor.iManufacturer,
- manufacturer, sizeof(manufacturer));
- if (!strcmp("MSI", manufacturer)) {
- /* iManufacturer 1 MSI
- iProduct 2 MSI K-VOX */
- props->rc.core.rc_codes = af9015_rc_setup_match(
- AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
- af9015_rc_setup_modparam);
- }
- }
-
- /* finally load "empty" just for leaving IR receiver enabled */
- if (!props->rc.core.rc_codes)
- props->rc.core.rc_codes = RC_MAP_EMPTY;
-
- return;
-}
-
-static int af9015_read_config(struct usb_device *udev)
-{
- int ret;
- u8 val, i, offset = 0;
- struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
-
- /* IR remote controller */
- req.addr = AF9015_EEPROM_IR_MODE;
- /* first message will timeout often due to possible hw bug */
- for (i = 0; i < 4; i++) {
- ret = af9015_rw_udev(udev, &req);
- if (!ret)
- break;
- }
- if (ret)
- goto error;
-
- ret = af9015_eeprom_hash(udev);
- if (ret)
- goto error;
-
- deb_info("%s: IR mode=%d\n", __func__, val);
- for (i = 0; i < af9015_properties_count; i++) {
- if (val == AF9015_IR_MODE_DISABLED)
- af9015_properties[i].rc.core.rc_codes = NULL;
- else
- af9015_set_remote_config(udev, &af9015_properties[i]);
- }
-
- /* TS mode - one or two receivers */
- req.addr = AF9015_EEPROM_TS_MODE;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- af9015_config.dual_mode = val;
- deb_info("%s: TS mode=%d\n", __func__, af9015_config.dual_mode);
-
- /* Set adapter0 buffer size according to USB port speed, adapter1 buffer
- size can be static because it is enabled only USB2.0 */
- for (i = 0; i < af9015_properties_count; i++) {
- /* USB1.1 set smaller buffersize and disable 2nd adapter */
- if (udev->speed == USB_SPEED_FULL) {
- af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
- = TS_USB11_FRAME_SIZE;
- /* disable 2nd adapter because we don't have
- PID-filters */
- af9015_config.dual_mode = 0;
- } else {
- af9015_properties[i].adapter[0].fe[0].stream.u.bulk.buffersize
- = TS_USB20_FRAME_SIZE;
- }
- }
-
- if (af9015_config.dual_mode) {
- /* read 2nd demodulator I2C address */
- req.addr = AF9015_EEPROM_DEMOD2_I2C;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- af9015_af9013_config[1].i2c_addr = val;
-
- /* enable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 2;
-
- } else {
- /* disable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 1;
- }
-
- for (i = 0; i < af9015_properties[0].num_adapters; i++) {
- if (i == 1)
- offset = AF9015_EEPROM_OFFSET;
- /* xtal */
- req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- switch (val) {
- case 0:
- af9015_af9013_config[i].clock = 28800000;
- break;
- case 1:
- af9015_af9013_config[i].clock = 20480000;
- break;
- case 2:
- af9015_af9013_config[i].clock = 28000000;
- break;
- case 3:
- af9015_af9013_config[i].clock = 25000000;
- break;
- };
- deb_info("%s: [%d] xtal=%d set clock=%d\n", __func__, i,
- val, af9015_af9013_config[i].clock);
-
- /* IF frequency */
- req.addr = AF9015_EEPROM_IF1H + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
-
- af9015_af9013_config[i].if_frequency = val << 8;
-
- req.addr = AF9015_EEPROM_IF1L + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
-
- af9015_af9013_config[i].if_frequency += val;
- af9015_af9013_config[i].if_frequency *= 1000;
- deb_info("%s: [%d] IF frequency=%d\n", __func__, i,
- af9015_af9013_config[0].if_frequency);
-
- /* MT2060 IF1 */
- req.addr = AF9015_EEPROM_MT2060_IF1H + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- af9015_config.mt2060_if1[i] = val << 8;
- req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- af9015_config.mt2060_if1[i] += val;
- deb_info("%s: [%d] MT2060 IF1=%d\n", __func__, i,
- af9015_config.mt2060_if1[i]);
-
- /* tuner */
- req.addr = AF9015_EEPROM_TUNER_ID1 + offset;
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- goto error;
- switch (val) {
- case AF9013_TUNER_ENV77H11D5:
- case AF9013_TUNER_MT2060:
- case AF9013_TUNER_QT1010:
- case AF9013_TUNER_UNKNOWN:
- case AF9013_TUNER_MT2060_2:
- case AF9013_TUNER_TDA18271:
- case AF9013_TUNER_QT1010A:
- case AF9013_TUNER_TDA18218:
- af9015_af9013_config[i].spec_inv = 1;
- break;
- case AF9013_TUNER_MXL5003D:
- case AF9013_TUNER_MXL5005D:
- case AF9013_TUNER_MXL5005R:
- case AF9013_TUNER_MXL5007T:
- af9015_af9013_config[i].spec_inv = 0;
- break;
- case AF9013_TUNER_MC44S803:
- af9015_af9013_config[i].gpio[1] = AF9013_GPIO_LO;
- af9015_af9013_config[i].spec_inv = 1;
- break;
- default:
- warn("tuner id=%d not supported, please report!", val);
- return -ENODEV;
- };
-
- af9015_af9013_config[i].tuner = val;
- deb_info("%s: [%d] tuner id=%d\n", __func__, i, val);
- }
-
-error:
- if (ret)
- err("eeprom read failed=%d", ret);
-
- /* AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
- content :-( Override some wrong values here. Ditto for the
- AVerTV Red HD+ (A850T) device. */
- if (le16_to_cpu(udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
- ((le16_to_cpu(udev->descriptor.idProduct) ==
- USB_PID_AVERMEDIA_A850) ||
- (le16_to_cpu(udev->descriptor.idProduct) ==
- USB_PID_AVERMEDIA_A850T))) {
- deb_info("%s: AverMedia A850: overriding config\n", __func__);
- /* disable dual mode */
- af9015_config.dual_mode = 0;
- /* disable 2nd adapter */
- for (i = 0; i < af9015_properties_count; i++)
- af9015_properties[i].num_adapters = 1;
-
- /* set correct IF */
- af9015_af9013_config[0].if_frequency = 4570000;
- }
-
- return ret;
-}
-
-static int af9015_identify_state(struct usb_device *udev,
- struct dvb_usb_device_properties *props,
- struct dvb_usb_device_description **desc,
- int *cold)
-{
- int ret;
- u8 reply;
- struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
-
- ret = af9015_rw_udev(udev, &req);
- if (ret)
- return ret;
-
- deb_info("%s: reply:%02x\n", __func__, reply);
- if (reply == 0x02)
- *cold = 0;
- else
- *cold = 1;
-
- return ret;
-}
-
-static int af9015_rc_query(struct dvb_usb_device *d)
-{
- struct af9015_state *priv = d->priv;
- int ret;
- u8 buf[17];
-
- /* read registers needed to detect remote controller code */
- ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
- if (ret)
- goto error;
-
- /* If any of these are non-zero, assume invalid data */
- if (buf[1] || buf[2] || buf[3])
- return ret;
-
- /* Check for repeat of previous code */
- if ((priv->rc_repeat != buf[6] || buf[0]) &&
- !memcmp(&buf[12], priv->rc_last, 4)) {
- deb_rc("%s: key repeated\n", __func__);
- rc_keydown(d->rc_dev, priv->rc_keycode, 0);
- priv->rc_repeat = buf[6];
- return ret;
- }
-
- /* Only process key if canary killed */
- if (buf[16] != 0xff && buf[0] != 0x01) {
- deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__,
- buf[12], buf[13], buf[14], buf[15]);
-
- /* Reset the canary */
- ret = af9015_write_reg(d, 0x98e9, 0xff);
- if (ret)
- goto error;
-
- /* Remember this key */
- memcpy(priv->rc_last, &buf[12], 4);
- if (buf[14] == (u8) ~buf[15]) {
- if (buf[12] == (u8) ~buf[13]) {
- /* NEC */
- priv->rc_keycode = buf[12] << 8 | buf[14];
- } else {
- /* NEC extended*/
- priv->rc_keycode = buf[12] << 16 |
- buf[13] << 8 | buf[14];
- }
- } else {
- /* 32 bit NEC */
- priv->rc_keycode = buf[12] << 24 | buf[13] << 16 |
- buf[14] << 8 | buf[15];
- }
- rc_keydown(d->rc_dev, priv->rc_keycode, 0);
- } else {
- deb_rc("%s: no key press\n", __func__);
- /* Invalidate last keypress */
- /* Not really needed, but helps with debug */
- priv->rc_last[2] = priv->rc_last[3];
- }
-
- priv->rc_repeat = buf[6];
-
-error:
- if (ret)
- err("%s: failed:%d", __func__, ret);
-
- return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->set_frontend[adap->id](fe);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_read_status(struct dvb_frontend *fe,
- fe_status_t *status)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->read_status[adap->id](fe, status);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_init(struct dvb_frontend *fe)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->init[adap->id](fe);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-/* override demod callbacks for resource locking */
-static int af9015_af9013_sleep(struct dvb_frontend *fe)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->sleep[adap->id](fe);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-/* override tuner callbacks for resource locking */
-static int af9015_tuner_init(struct dvb_frontend *fe)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->tuner_init[adap->id](fe);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-/* override tuner callbacks for resource locking */
-static int af9015_tuner_sleep(struct dvb_frontend *fe)
-{
- int ret;
- struct dvb_usb_adapter *adap = fe->dvb->priv;
- struct af9015_state *priv = adap->dev->priv;
-
- if (mutex_lock_interruptible(&adap->dev->usb_mutex))
- return -EAGAIN;
-
- ret = priv->tuner_sleep[adap->id](fe);
-
- mutex_unlock(&adap->dev->usb_mutex);
-
- return ret;
-}
-
-
static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
{
int ret;
struct af9015_state *state = adap->dev->priv;
- if (adap->id == 1) {
+ if (adap->id == 0) {
+ state->af9013_config[0].ts_mode = AF9013_TS_USB;
+ memcpy(state->af9013_config[0].api_version, "\x0\x1\x9\x0", 4);
+ state->af9013_config[0].gpio[0] = AF9013_GPIO_HI;
+ state->af9013_config[0].gpio[3] = AF9013_GPIO_TUNER_ON;
+ } else if (adap->id == 1) {
+ state->af9013_config[1].ts_mode = AF9013_TS_SERIAL;
+ memcpy(state->af9013_config[1].api_version, "\x0\x1\x9\x0", 4);
+ state->af9013_config[1].gpio[0] = AF9013_GPIO_TUNER_ON;
+ state->af9013_config[1].gpio[1] = AF9013_GPIO_LO;
+
/* copy firmware to 2nd demodulator */
- if (af9015_config.dual_mode) {
+ if (state->dual_mode) {
ret = af9015_copy_firmware(adap->dev);
if (ret) {
err("firmware copy to 2nd frontend " \
"failed, will disable it");
- af9015_config.dual_mode = 0;
+ state->dual_mode = 0;
return -ENODEV;
}
} else {
@@ -1219,8 +846,8 @@
}
/* attach demodulator */
- adap->fe_adap[0].fe = dvb_attach(af9013_attach,
- &af9015_af9013_config[adap->id], &adap->dev->i2c_adap);
+ adap->fe[0] = dvb_attach(af9013_attach,
+ &state->af9013_config[adap->id], &adap->dev->i2c_adap);
/*
* AF9015 firmware does not like if it gets interrupted by I2C adapter
@@ -1228,27 +855,26 @@
* is used only 2nd demodulator and tuner on dual tuner devices.
* Override demodulator callbacks and use mutex for limit access to
* those "critical" paths to keep AF9015 happy.
- * Note: we abuse unused usb_mutex here.
*/
- if (adap->fe_adap[0].fe) {
+ if (adap->fe[0]) {
state->set_frontend[adap->id] =
- adap->fe_adap[0].fe->ops.set_frontend;
- adap->fe_adap[0].fe->ops.set_frontend =
+ adap->fe[0]->ops.set_frontend;
+ adap->fe[0]->ops.set_frontend =
af9015_af9013_set_frontend;
state->read_status[adap->id] =
- adap->fe_adap[0].fe->ops.read_status;
- adap->fe_adap[0].fe->ops.read_status =
+ adap->fe[0]->ops.read_status;
+ adap->fe[0]->ops.read_status =
af9015_af9013_read_status;
- state->init[adap->id] = adap->fe_adap[0].fe->ops.init;
- adap->fe_adap[0].fe->ops.init = af9015_af9013_init;
+ state->init[adap->id] = adap->fe[0]->ops.init;
+ adap->fe[0]->ops.init = af9015_af9013_init;
- state->sleep[adap->id] = adap->fe_adap[0].fe->ops.sleep;
- adap->fe_adap[0].fe->ops.sleep = af9015_af9013_sleep;
+ state->sleep[adap->id] = adap->fe[0]->ops.sleep;
+ adap->fe[0]->ops.sleep = af9015_af9013_sleep;
}
- return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+ return adap->fe[0] == NULL ? -ENODEV : 0;
}
static struct mt2060_config af9015_mt2060_config = {
@@ -1316,57 +942,57 @@
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
- int ret;
struct af9015_state *state = adap->dev->priv;
+ int ret;
deb_info("%s:\n", __func__);
- switch (af9015_af9013_config[adap->id].tuner) {
+ switch (state->af9013_config[adap->id].tuner) {
case AF9013_TUNER_MT2060:
case AF9013_TUNER_MT2060_2:
- ret = dvb_attach(mt2060_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(mt2060_attach, adap->fe[0],
&adap->dev->i2c_adap, &af9015_mt2060_config,
- af9015_config.mt2060_if1[adap->id])
+ state->mt2060_if1[adap->id])
== NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_QT1010:
case AF9013_TUNER_QT1010A:
- ret = dvb_attach(qt1010_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(qt1010_attach, adap->fe[0],
&adap->dev->i2c_adap,
&af9015_qt1010_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18271:
- ret = dvb_attach(tda18271_attach, adap->fe_adap[0].fe, 0xc0,
+ ret = dvb_attach(tda18271_attach, adap->fe[0], 0xc0,
&adap->dev->i2c_adap,
&af9015_tda18271_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_TDA18218:
- ret = dvb_attach(tda18218_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(tda18218_attach, adap->fe[0],
&adap->dev->i2c_adap,
&af9015_tda18218_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5003D:
- ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(mxl5005s_attach, adap->fe[0],
&adap->dev->i2c_adap,
&af9015_mxl5003_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5005D:
case AF9013_TUNER_MXL5005R:
- ret = dvb_attach(mxl5005s_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(mxl5005s_attach, adap->fe[0],
&adap->dev->i2c_adap,
&af9015_mxl5005_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_ENV77H11D5:
- ret = dvb_attach(dvb_pll_attach, adap->fe_adap[0].fe, 0xc0,
+ ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0xc0,
&adap->dev->i2c_adap,
DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MC44S803:
- ret = dvb_attach(mc44s803_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(mc44s803_attach, adap->fe[0],
&adap->dev->i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
case AF9013_TUNER_MXL5007T:
- ret = dvb_attach(mxl5007t_attach, adap->fe_adap[0].fe,
+ ret = dvb_attach(mxl5007t_attach, adap->fe[0],
&adap->dev->i2c_adap,
0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
break;
@@ -1374,575 +1000,437 @@
default:
ret = -ENODEV;
err("Unknown tuner id:%d",
- af9015_af9013_config[adap->id].tuner);
+ state->af9013_config[adap->id].tuner);
}
- if (adap->fe_adap[0].fe->ops.tuner_ops.init) {
+ if (adap->fe[0]->ops.tuner_ops.init) {
state->tuner_init[adap->id] =
- adap->fe_adap[0].fe->ops.tuner_ops.init;
- adap->fe_adap[0].fe->ops.tuner_ops.init = af9015_tuner_init;
+ adap->fe[0]->ops.tuner_ops.init;
+ adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init;
}
- if (adap->fe_adap[0].fe->ops.tuner_ops.sleep) {
+ if (adap->fe[0]->ops.tuner_ops.sleep) {
state->tuner_sleep[adap->id] =
- adap->fe_adap[0].fe->ops.tuner_ops.sleep;
- adap->fe_adap[0].fe->ops.tuner_ops.sleep = af9015_tuner_sleep;
+ adap->fe[0]->ops.tuner_ops.sleep;
+ adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep;
}
return ret;
}
-enum af9015_usb_table_entry {
- AFATECH_9015,
- AFATECH_9016,
- WINFAST_DTV_GOLD,
- PINNACLE_PCTV_71E,
- KWORLD_PLUSTV_399U,
- TINYTWIN,
- AZUREWAVE_TU700,
- TERRATEC_AF9015,
- KWORLD_PLUSTV_PC160,
- AVERTV_VOLAR_X,
- XTENSIONS_380U,
- MSI_DIGIVOX_DUO,
- AVERTV_VOLAR_X_REV2,
- TELESTAR_STARSTICK_2,
- AVERMEDIA_A309_USB,
- MSI_DIGIVOX_MINI_III,
- KWORLD_E396,
- KWORLD_E39B,
- KWORLD_E395,
- TREKSTOR_DVBT,
- AVERTV_A850,
- AVERTV_A805,
- CONCEPTRONIC_CTVDIGRCU,
- KWORLD_MC810,
- GENIUS_TVGO_DVB_T03,
- KWORLD_399U_2,
- KWORLD_PC160_T,
- SVEON_STV20,
- TINYTWIN_2,
- WINFAST_DTV2000DS,
- KWORLD_UB383_T,
- KWORLD_E39A,
- AVERMEDIA_A815M,
- CINERGY_T_STICK_RC,
- CINERGY_T_DUAL_RC,
- AVERTV_A850T,
- TINYTWIN_3,
- SVEON_STV22,
+static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ int ret;
+ deb_info("%s: onoff:%d\n", __func__, onoff);
+
+ if (onoff)
+ ret = af9015_set_reg_bit(adap->dev, 0xd503, 0);
+ else
+ ret = af9015_clear_reg_bit(adap->dev, 0xd503, 0);
+
+ return ret;
+}
+
+static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ int ret;
+ u8 idx;
+
+ deb_info("%s: set pid filter, index %d, pid %x, onoff %d\n",
+ __func__, index, pid, onoff);
+
+ ret = af9015_write_reg(adap->dev, 0xd505, (pid & 0xff));
+ if (ret)
+ goto error;
+
+ ret = af9015_write_reg(adap->dev, 0xd506, (pid >> 8));
+ if (ret)
+ goto error;
+
+ idx = ((index & 0x1f) | (1 << 5));
+ ret = af9015_write_reg(adap->dev, 0xd504, idx);
+
+error:
+ return ret;
+}
+
+static int af9015_init_endpoint(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ int ret;
+ u16 frame_size;
+ u8 packet_size;
+ deb_info("%s: USB speed:%d\n", __func__, d->udev->speed);
+
+ if (d->udev->speed == USB_SPEED_FULL) {
+ frame_size = TS_USB11_FRAME_SIZE/4;
+ packet_size = TS_USB11_MAX_PACKET_SIZE/4;
+ } else {
+ frame_size = TS_USB20_FRAME_SIZE/4;
+ packet_size = TS_USB20_MAX_PACKET_SIZE/4;
+ }
+
+ ret = af9015_set_reg_bit(d, 0xd507, 2); /* assert EP4 reset */
+ if (ret)
+ goto error;
+ ret = af9015_set_reg_bit(d, 0xd50b, 1); /* assert EP5 reset */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xdd11, 5); /* disable EP4 */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xdd11, 6); /* disable EP5 */
+ if (ret)
+ goto error;
+ ret = af9015_set_reg_bit(d, 0xdd11, 5); /* enable EP4 */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_set_reg_bit(d, 0xdd11, 6); /* enable EP5 */
+ if (ret)
+ goto error;
+ }
+ ret = af9015_clear_reg_bit(d, 0xdd13, 5); /* disable EP4 NAK */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_clear_reg_bit(d, 0xdd13, 6); /* disable EP5 NAK */
+ if (ret)
+ goto error;
+ }
+ /* EP4 xfer length */
+ ret = af9015_write_reg(d, 0xdd88, frame_size & 0xff);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd89, frame_size >> 8);
+ if (ret)
+ goto error;
+ /* EP5 xfer length */
+ ret = af9015_write_reg(d, 0xdd8a, frame_size & 0xff);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd8b, frame_size >> 8);
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd0c, packet_size); /* EP4 packet size */
+ if (ret)
+ goto error;
+ ret = af9015_write_reg(d, 0xdd0d, packet_size); /* EP5 packet size */
+ if (ret)
+ goto error;
+ ret = af9015_clear_reg_bit(d, 0xd507, 2); /* negate EP4 reset */
+ if (ret)
+ goto error;
+ if (state->dual_mode) {
+ ret = af9015_clear_reg_bit(d, 0xd50b, 1); /* negate EP5 reset */
+ if (ret)
+ goto error;
+ }
+
+ /* enable / disable mp2if2 */
+ if (state->dual_mode)
+ ret = af9015_set_reg_bit(d, 0xd50b, 0);
+ else
+ ret = af9015_clear_reg_bit(d, 0xd50b, 0);
+
+error:
+ if (ret)
+ err("endpoint init failed:%d", ret);
+ return ret;
+}
+
+static int af9015_init(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ int ret;
+ deb_info("%s:\n", __func__);
+
+ mutex_init(&state->fe_mutex);
+
+ /* init RC canary */
+ ret = af9015_write_reg(d, 0x98e9, 0xff);
+ if (ret)
+ goto error;
+
+ ret = af9015_init_endpoint(d);
+ if (ret)
+ goto error;
+
+error:
+ return ret;
+}
+
+struct af9015_rc_setup {
+ unsigned int id;
+ char *rc_codes;
};
-static struct usb_device_id af9015_usb_table[] = {
- [AFATECH_9015] = {
- USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015)},
- [AFATECH_9016] = {
- USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016)},
- [WINFAST_DTV_GOLD] = {
- USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD)},
- [PINNACLE_PCTV_71E] = {
- USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E)},
- [KWORLD_PLUSTV_399U] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U)},
- [TINYTWIN] = {
- USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN)},
- [AZUREWAVE_TU700] = {
- USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700)},
- [TERRATEC_AF9015] = {
- USB_DEVICE(USB_VID_TERRATEC,
- USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2)},
- [KWORLD_PLUSTV_PC160] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T)},
- [AVERTV_VOLAR_X] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X)},
- [XTENSIONS_380U] = {
- USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380)},
- [MSI_DIGIVOX_DUO] = {
- USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO)},
- [AVERTV_VOLAR_X_REV2] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2)},
- [TELESTAR_STARSTICK_2] = {
- USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2)},
- [AVERMEDIA_A309_USB] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309)},
- [MSI_DIGIVOX_MINI_III] = {
- USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III)},
- [KWORLD_E396] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U)},
- [KWORLD_E39B] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2)},
- [KWORLD_E395] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3)},
- [TREKSTOR_DVBT] = {
- USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT)},
- [AVERTV_A850] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850)},
- [AVERTV_A805] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805)},
- [CONCEPTRONIC_CTVDIGRCU] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU)},
- [KWORLD_MC810] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810)},
- [GENIUS_TVGO_DVB_T03] = {
- USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03)},
- [KWORLD_399U_2] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2)},
- [KWORLD_PC160_T] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T)},
- [SVEON_STV20] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20)},
- [TINYTWIN_2] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2)},
- [WINFAST_DTV2000DS] = {
- USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS)},
- [KWORLD_UB383_T] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T)},
- [KWORLD_E39A] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
- [AVERMEDIA_A815M] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)},
- [CINERGY_T_STICK_RC] = {
- USB_DEVICE(USB_VID_TERRATEC,
- USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
- [CINERGY_T_DUAL_RC] = {
- USB_DEVICE(USB_VID_TERRATEC,
- USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
- [AVERTV_A850T] = {
- USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T)},
- [TINYTWIN_3] = {
- USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3)},
- [SVEON_STV22] = {
- USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22)},
+static char *af9015_rc_setup_match(unsigned int id,
+ const struct af9015_rc_setup *table)
+{
+ for (; table->rc_codes; table++)
+ if (table->id == id)
+ return table->rc_codes;
+ return NULL;
+}
+
+static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
+ { AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
+ { AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
+ { AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
+ { AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
+ { AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
{ }
};
-MODULE_DEVICE_TABLE(usb, af9015_usb_table);
-#define AF9015_RC_INTERVAL 500
-static struct dvb_usb_device_properties af9015_properties[] = {
- {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
+ { 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
+ { 0xa3703d00, RC_MAP_ALINK_DTU_M },
+ { 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
+ { 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
+ { }
+};
- .usb_ctrl = DEVICE_SPECIFIC,
- .download_firmware = af9015_download_firmware,
- .firmware = "dvb-usb-af9015.fw",
- .no_reconnect = 1,
+static int af9015_rc_query(struct dvb_usb_device *d)
+{
+ struct af9015_state *state = d->priv;
+ int ret;
+ u8 buf[17];
- .size_of_priv = sizeof(struct af9015_state),
+ deb_info("%s:\n", __func__);
- .num_adapters = 2,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ /* read registers needed to detect remote controller code */
+ ret = af9015_read_regs(d, 0x98d9, buf, sizeof(buf));
+ if (ret)
+ goto error;
- .pid_filter_count = 32,
- .pid_filter = af9015_pid_filter,
- .pid_filter_ctrl = af9015_pid_filter_ctrl,
+ /* If any of these are non-zero, assume invalid data */
+ if (buf[1] || buf[2] || buf[3])
+ return ret;
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x84,
- },
- }
- },
- },
- {
- .num_frontends = 1,
- .fe = {
- {
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x85,
- .u = {
- .bulk = {
- .buffersize = TS_USB20_FRAME_SIZE,
- }
- }
- },
- }
- },
+ /* Check for repeat of previous code */
+ if ((state->rc_repeat != buf[6] || buf[0]) &&
+ !memcmp(&buf[12], state->rc_last, 4)) {
+ deb_rc("%s: key repeated\n", __func__);
+ rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ state->rc_repeat = buf[6];
+ return ret;
+ }
+
+ /* Only process key if canary killed */
+ if (buf[16] != 0xff && buf[0] != 0x01) {
+ deb_rc("%s: key pressed %02x %02x %02x %02x\n", __func__,
+ buf[12], buf[13], buf[14], buf[15]);
+
+ /* Reset the canary */
+ ret = af9015_write_reg(d, 0x98e9, 0xff);
+ if (ret)
+ goto error;
+
+ /* Remember this key */
+ memcpy(state->rc_last, &buf[12], 4);
+ if (buf[14] == (u8) ~buf[15]) {
+ if (buf[12] == (u8) ~buf[13]) {
+ /* NEC */
+ state->rc_keycode = buf[12] << 8 | buf[14];
+ } else {
+ /* NEC extended*/
+ state->rc_keycode = buf[12] << 16 |
+ buf[13] << 8 | buf[14];
}
- },
-
- .identify_state = af9015_identify_state,
-
- .rc.core = {
- .protocol = RC_TYPE_NEC,
- .module_name = "af9015",
- .rc_query = af9015_rc_query,
- .rc_interval = AF9015_RC_INTERVAL,
- .allowed_protos = RC_TYPE_NEC,
- },
-
- .i2c_algo = &af9015_i2c_algo,
-
- .num_device_descs = 12, /* check max from dvb-usb.h */
- .devices = {
- {
- .name = "Afatech AF9015 DVB-T USB2.0 stick",
- .cold_ids = {
- &af9015_usb_table[AFATECH_9015],
- &af9015_usb_table[AFATECH_9016],
- },
- }, {
- .name = "Leadtek WinFast DTV Dongle Gold",
- .cold_ids = {
- &af9015_usb_table[WINFAST_DTV_GOLD],
- },
- }, {
- .name = "Pinnacle PCTV 71e",
- .cold_ids = {
- &af9015_usb_table[PINNACLE_PCTV_71E],
- },
- }, {
- .name = "KWorld PlusTV Dual DVB-T Stick " \
- "(DVB-T 399U)",
- .cold_ids = {
- &af9015_usb_table[KWORLD_PLUSTV_399U],
- &af9015_usb_table[KWORLD_399U_2],
- },
- }, {
- .name = "DigitalNow TinyTwin DVB-T Receiver",
- .cold_ids = {
- &af9015_usb_table[TINYTWIN],
- &af9015_usb_table[TINYTWIN_2],
- &af9015_usb_table[TINYTWIN_3],
- },
- }, {
- .name = "TwinHan AzureWave AD-TU700(704J)",
- .cold_ids = {
- &af9015_usb_table[AZUREWAVE_TU700],
- },
- }, {
- .name = "TerraTec Cinergy T USB XE",
- .cold_ids = {
- &af9015_usb_table[TERRATEC_AF9015],
- },
- }, {
- .name = "KWorld PlusTV Dual DVB-T PCI " \
- "(DVB-T PC160-2T)",
- .cold_ids = {
- &af9015_usb_table[KWORLD_PLUSTV_PC160],
- },
- }, {
- .name = "AVerMedia AVerTV DVB-T Volar X",
- .cold_ids = {
- &af9015_usb_table[AVERTV_VOLAR_X],
- },
- }, {
- .name = "TerraTec Cinergy T Stick RC",
- .cold_ids = {
- &af9015_usb_table[CINERGY_T_STICK_RC],
- },
- }, {
- .name = "TerraTec Cinergy T Stick Dual RC",
- .cold_ids = {
- &af9015_usb_table[CINERGY_T_DUAL_RC],
- },
- }, {
- .name = "AverMedia AVerTV Red HD+ (A850T)",
- .cold_ids = {
- &af9015_usb_table[AVERTV_A850T],
- },
- },
+ } else {
+ /* 32 bit NEC */
+ state->rc_keycode = buf[12] << 24 | buf[13] << 16 |
+ buf[14] << 8 | buf[15];
}
- }, {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ rc_keydown(d->rc_dev, state->rc_keycode, 0);
+ } else {
+ deb_rc("%s: no key press\n", __func__);
+ /* Invalidate last keypress */
+ /* Not really needed, but helps with debug */
+ state->rc_last[2] = state->rc_last[3];
+ }
- .usb_ctrl = DEVICE_SPECIFIC,
- .download_firmware = af9015_download_firmware,
- .firmware = "dvb-usb-af9015.fw",
- .no_reconnect = 1,
+ state->rc_repeat = buf[6];
- .size_of_priv = sizeof(struct af9015_state),
+error:
+ if (ret)
+ err("%s: failed:%d", __func__, ret);
- .num_adapters = 2,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ return ret;
+}
- .pid_filter_count = 32,
- .pid_filter = af9015_pid_filter,
- .pid_filter_ctrl = af9015_pid_filter_ctrl,
+static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
+{
+ struct af9015_state *state = d->priv;
+ u16 vid = le16_to_cpu(d->udev->descriptor.idVendor);
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x84,
- },
- }
- },
- },
- {
- .num_frontends = 1,
- .fe = {
- {
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x85,
- .u = {
- .bulk = {
- .buffersize = TS_USB20_FRAME_SIZE,
- }
- }
- },
- }
- },
- }
- },
+ if (state->ir_mode == AF9015_IR_MODE_DISABLED)
+ return 0;
- .identify_state = af9015_identify_state,
+ /* try to load remote based module param */
+ rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote,
+ af9015_rc_setup_modparam);
- .rc.core = {
- .protocol = RC_TYPE_NEC,
- .module_name = "af9015",
- .rc_query = af9015_rc_query,
- .rc_interval = AF9015_RC_INTERVAL,
- .allowed_protos = RC_TYPE_NEC,
- },
+ /* try to load remote based eeprom hash */
+ if (!rc->map_name)
+ rc->map_name = af9015_rc_setup_match(state->eeprom_sum,
+ af9015_rc_setup_hashes);
- .i2c_algo = &af9015_i2c_algo,
-
- .num_device_descs = 10, /* check max from dvb-usb.h */
- .devices = {
- {
- .name = "Xtensions XD-380",
- .cold_ids = {
- &af9015_usb_table[XTENSIONS_380U],
- },
- }, {
- .name = "MSI DIGIVOX Duo",
- .cold_ids = {
- &af9015_usb_table[MSI_DIGIVOX_DUO],
- },
- }, {
- .name = "Fujitsu-Siemens Slim Mobile USB DVB-T",
- .cold_ids = {
- &af9015_usb_table[AVERTV_VOLAR_X_REV2],
- },
- }, {
- .name = "Telestar Starstick 2",
- .cold_ids = {
- &af9015_usb_table[TELESTAR_STARSTICK_2],
- },
- }, {
- .name = "AVerMedia A309",
- .cold_ids = {
- &af9015_usb_table[AVERMEDIA_A309_USB],
- },
- }, {
- .name = "MSI Digi VOX mini III",
- .cold_ids = {
- &af9015_usb_table[MSI_DIGIVOX_MINI_III],
- },
- }, {
- .name = "KWorld USB DVB-T TV Stick II " \
- "(VS-DVB-T 395U)",
- .cold_ids = {
- &af9015_usb_table[KWORLD_E396],
- &af9015_usb_table[KWORLD_E39B],
- &af9015_usb_table[KWORLD_E395],
- &af9015_usb_table[KWORLD_E39A],
- },
- }, {
- .name = "TrekStor DVB-T USB Stick",
- .cold_ids = {
- &af9015_usb_table[TREKSTOR_DVBT],
- },
- }, {
- .name = "AverMedia AVerTV Volar Black HD " \
- "(A850)",
- .cold_ids = {
- &af9015_usb_table[AVERTV_A850],
- },
- }, {
- .name = "Sveon STV22 Dual USB DVB-T Tuner HDTV",
- .cold_ids = {
- &af9015_usb_table[SVEON_STV22],
- },
- },
+ /* try to load remote based USB iManufacturer string */
+ if (!rc->map_name && vid == USB_VID_AFATECH) {
+ /* Check USB manufacturer and product strings and try
+ to determine correct remote in case of chip vendor
+ reference IDs are used.
+ DO NOT ADD ANYTHING NEW HERE. Use hashes instead. */
+ char manufacturer[10];
+ memset(manufacturer, 0, sizeof(manufacturer));
+ usb_string(d->udev, d->udev->descriptor.iManufacturer,
+ manufacturer, sizeof(manufacturer));
+ if (!strcmp("MSI", manufacturer)) {
+ /* iManufacturer 1 MSI
+ iProduct 2 MSI K-VOX */
+ rc->map_name = af9015_rc_setup_match(
+ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
+ af9015_rc_setup_modparam);
}
- }, {
- .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+ }
- .usb_ctrl = DEVICE_SPECIFIC,
- .download_firmware = af9015_download_firmware,
- .firmware = "dvb-usb-af9015.fw",
- .no_reconnect = 1,
+ rc->allowed_protos = RC_TYPE_NEC;
+ rc->query = af9015_rc_query;
+ rc->interval = 500;
- .size_of_priv = sizeof(struct af9015_state),
+ return 0;
+}
- .num_adapters = 2,
- .adapter = {
- {
- .num_frontends = 1,
- .fe = {
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER |
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+/* interface 0 is used by DVB-T receiver and
+ interface 1 is for remote controller (HID) */
+static struct dvb_usb_device_properties af9015_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct af9015_state),
- .pid_filter_count = 32,
- .pid_filter = af9015_pid_filter,
- .pid_filter_ctrl = af9015_pid_filter_ctrl,
+ .generic_bulk_ctrl_endpoint = 0x02,
+ .generic_bulk_ctrl_endpoint_response = 0x81,
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x84,
- },
- }
- },
- },
- {
- .num_frontends = 1,
- .fe = {
- {
- .frontend_attach = af9015_af9013_frontend_attach,
- .tuner_attach = af9015_tuner_attach,
- .stream = {
- .type = USB_BULK,
- .count = 6,
- .endpoint = 0x85,
- .u = {
- .bulk = {
- .buffersize = TS_USB20_FRAME_SIZE,
- }
- }
- },
- }
- },
- }
+ .identify_state = af9015_identify_state,
+ .firmware = "dvb-usb-af9015.fw",
+ .download_firmware = af9015_download_firmware,
+
+ .read_config = af9015_read_config,
+ .i2c_algo = &af9015_i2c_algo,
+ .init = af9015_init,
+ .get_rc_config = af9015_get_rc_config,
+ .get_usb_stream_config = af9015_get_usb_stream_config,
+
+ .get_adapter_count = af9015_get_adapter_count,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = af9015_pid_filter,
+ .pid_filter_ctrl = af9015_pid_filter_ctrl,
+ .frontend_attach = af9015_af9013_frontend_attach,
+ .tuner_attach = af9015_tuner_attach,
},
-
- .identify_state = af9015_identify_state,
-
- .rc.core = {
- .protocol = RC_TYPE_NEC,
- .module_name = "af9015",
- .rc_query = af9015_rc_query,
- .rc_interval = AF9015_RC_INTERVAL,
- .allowed_protos = RC_TYPE_NEC,
- },
-
- .i2c_algo = &af9015_i2c_algo,
-
- .num_device_descs = 9, /* check max from dvb-usb.h */
- .devices = {
- {
- .name = "AverMedia AVerTV Volar GPS 805 (A805)",
- .cold_ids = {
- &af9015_usb_table[AVERTV_A805],
- },
- }, {
- .name = "Conceptronic USB2.0 DVB-T CTVDIGRCU " \
- "V3.0",
- .cold_ids = {
- &af9015_usb_table[CONCEPTRONIC_CTVDIGRCU],
- },
- }, {
- .name = "KWorld Digial MC-810",
- .cold_ids = {
- &af9015_usb_table[KWORLD_MC810],
- },
- }, {
- .name = "Genius TVGo DVB-T03",
- .cold_ids = {
- &af9015_usb_table[GENIUS_TVGO_DVB_T03],
- },
- }, {
- .name = "KWorld PlusTV DVB-T PCI Pro Card " \
- "(DVB-T PC160-T)",
- .cold_ids = {
- &af9015_usb_table[KWORLD_PC160_T],
- },
- }, {
- .name = "Sveon STV20 Tuner USB DVB-T HDTV",
- .cold_ids = {
- &af9015_usb_table[SVEON_STV20],
- },
- }, {
- .name = "Leadtek WinFast DTV2000DS",
- .cold_ids = {
- &af9015_usb_table[WINFAST_DTV2000DS],
- },
- }, {
- .name = "KWorld USB DVB-T Stick Mobile " \
- "(UB383-T)",
- .cold_ids = {
- &af9015_usb_table[KWORLD_UB383_T],
- },
- }, {
- .name = "AverMedia AVerTV Volar M (A815Mac)",
- .cold_ids = {
- &af9015_usb_table[AVERMEDIA_A815M],
- },
- },
+ {
+ .frontend_attach = af9015_af9013_frontend_attach,
+ .tuner_attach = af9015_tuner_attach,
}
},
};
-static int af9015_usb_probe(struct usb_interface *intf,
- const struct usb_device_id *id)
-{
- int ret = 0;
- struct dvb_usb_device *d = NULL;
- struct usb_device *udev = interface_to_usbdev(intf);
- u8 i;
-
- deb_info("%s: interface:%d\n", __func__,
- intf->cur_altsetting->desc.bInterfaceNumber);
-
- /* interface 0 is used by DVB-T receiver and
- interface 1 is for remote controller (HID) */
- if (intf->cur_altsetting->desc.bInterfaceNumber == 0) {
- ret = af9015_read_config(udev);
- if (ret)
- return ret;
-
- for (i = 0; i < af9015_properties_count; i++) {
- ret = dvb_usb_device_init(intf, &af9015_properties[i],
- THIS_MODULE, &d, adapter_nr);
- if (!ret)
- break;
- if (ret != -ENODEV)
- return ret;
- }
- if (ret)
- return ret;
-
- if (d)
- ret = af9015_init(d);
- }
-
- return ret;
-}
+static const struct usb_device_id af9015_id_table[] = {
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015,
+ &af9015_props, "Afatech AF9015 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016,
+ &af9015_props, "Afatech AF9015 reference design", NULL) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD,
+ &af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) },
+ { DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E,
+ &af9015_props, "Pinnacle PCTV 71e", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U,
+ &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN,
+ &af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) },
+ { DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700,
+ &af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2,
+ &af9015_props, "TerraTec Cinergy T USB XE", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T,
+ &af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X,
+ &af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) },
+ { DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380,
+ &af9015_props, "Xtensions XD-380", NULL) },
+ { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO,
+ &af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2,
+ &af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TELESTAR, USB_PID_TELESTAR_STARSTICK_2,
+ &af9015_props, "Telestar Starstick 2", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309,
+ &af9015_props, "AVerMedia A309", NULL) },
+ { DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III,
+ &af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT,
+ &af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850,
+ &af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805,
+ &af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
+ &af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
+ &af9015_props, "KWorld Digial MC-810", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
+ &af9015_props, "Genius TVGo DVB-T03", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,
+ &af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T,
+ &af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20,
+ &af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2,
+ &af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) },
+ { DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS,
+ &af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T,
+ &af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4,
+ &af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M,
+ &af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC,
+ &af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) },
+ { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
+ &af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) },
+ { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T,
+ &af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) },
+ { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3,
+ &af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) },
+ { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22,
+ &af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, af9015_id_table);
/* usb specific object needed to register this driver with the usb subsystem */
static struct usb_driver af9015_usb_driver = {
- .name = "dvb_usb_af9015",
- .probe = af9015_usb_probe,
- .disconnect = dvb_usb_device_exit,
- .id_table = af9015_usb_table,
+ .name = KBUILD_MODNAME,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .id_table = af9015_id_table,
+ .no_dynamic_id = 1,
};
module_usb_driver(af9015_usb_driver);