lis3: solve dependency between core and ACPI
This solves the dependency between lis3lv02d.[ch] and ACPI specific
methods. It introduces a ->bus_priv pointer to the device struct which is
casted to 'struct acpi_device' in the ACIP layer. Changed hp_accel.c
accordingly.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
diff --git a/drivers/hwmon/hp_accel.c b/drivers/hwmon/hp_accel.c
index de26b1c..55d3dc5 100644
--- a/drivers/hwmon/hp_accel.c
+++ b/drivers/hwmon/hp_accel.c
@@ -85,25 +85,31 @@
/**
* lis3lv02d_acpi_init - ACPI _INI method: initialize the device.
- * @handle: the handle of the device
+ * @lis3: pointer to the device struct
*
- * Returns AE_OK on success.
+ * Returns 0 on success.
*/
-acpi_status lis3lv02d_acpi_init(acpi_handle handle)
+int lis3lv02d_acpi_init(struct lis3lv02d *lis3)
{
- return acpi_evaluate_object(handle, METHOD_NAME__INI, NULL, NULL);
+ struct acpi_device *dev = lis3->bus_priv;
+ if (acpi_evaluate_object(dev->handle, METHOD_NAME__INI,
+ NULL, NULL) != AE_OK)
+ return -EINVAL;
+
+ return 0;
}
/**
* lis3lv02d_acpi_read - ACPI ALRD method: read a register
- * @handle: the handle of the device
+ * @lis3: pointer to the device struct
* @reg: the register to read
* @ret: result of the operation
*
- * Returns AE_OK on success.
+ * Returns 0 on success.
*/
-acpi_status lis3lv02d_acpi_read(acpi_handle handle, int reg, u8 *ret)
+int lis3lv02d_acpi_read(struct lis3lv02d *lis3, int reg, u8 *ret)
{
+ struct acpi_device *dev = lis3->bus_priv;
union acpi_object arg0 = { ACPI_TYPE_INTEGER };
struct acpi_object_list args = { 1, &arg0 };
unsigned long long lret;
@@ -111,21 +117,22 @@
arg0.integer.value = reg;
- status = acpi_evaluate_integer(handle, "ALRD", &args, &lret);
+ status = acpi_evaluate_integer(dev->handle, "ALRD", &args, &lret);
*ret = lret;
- return status;
+ return (status != AE_OK) ? -EINVAL : 0;
}
/**
* lis3lv02d_acpi_write - ACPI ALWR method: write to a register
- * @handle: the handle of the device
+ * @lis3: pointer to the device struct
* @reg: the register to write to
* @val: the value to write
*
- * Returns AE_OK on success.
+ * Returns 0 on success.
*/
-acpi_status lis3lv02d_acpi_write(acpi_handle handle, int reg, u8 val)
+int lis3lv02d_acpi_write(struct lis3lv02d *lis3, int reg, u8 val)
{
+ struct acpi_device *dev = lis3->bus_priv;
unsigned long long ret; /* Not used when writting */
union acpi_object in_obj[2];
struct acpi_object_list args = { 2, in_obj };
@@ -135,7 +142,10 @@
in_obj[1].type = ACPI_TYPE_INTEGER;
in_obj[1].integer.value = val;
- return acpi_evaluate_integer(handle, "ALWR", &args, &ret);
+ if (acpi_evaluate_integer(dev->handle, "ALWR", &args, &ret) != AE_OK)
+ return -EINVAL;
+
+ return 0;
}
static int lis3lv02d_dmi_matched(const struct dmi_system_id *dmi)
@@ -217,7 +227,7 @@
static void hpled_set(struct delayed_led_classdev *led_cdev, enum led_brightness value)
{
- acpi_handle handle = lis3_dev.device->handle;
+ struct acpi_device *dev = lis3_dev.bus_priv;
unsigned long long ret; /* Not used when writing */
union acpi_object in_obj[1];
struct acpi_object_list args = { 1, in_obj };
@@ -225,7 +235,7 @@
in_obj[0].type = ACPI_TYPE_INTEGER;
in_obj[0].integer.value = !!value;
- acpi_evaluate_integer(handle, "ALED", &args, &ret);
+ acpi_evaluate_integer(dev->handle, "ALED", &args, &ret);
}
static struct delayed_led_classdev hpled_led = {
@@ -262,23 +272,6 @@
printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
}
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
-{
- u8 lo, hi;
-
- lis3_dev.read(handle, reg - 1, &lo);
- lis3_dev.read(handle, reg, &hi);
- /* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
- return (s16)((hi << 8) | lo);
-}
-
-static s16 lis3lv02d_read_8(acpi_handle handle, int reg)
-{
- s8 lo;
- lis3_dev.read(handle, reg, &lo);
- return lo;
-}
-
static int lis3lv02d_add(struct acpi_device *device)
{
int ret;
@@ -286,7 +279,7 @@
if (!device)
return -EINVAL;
- lis3_dev.device = device;
+ lis3_dev.bus_priv = device;
lis3_dev.init = lis3lv02d_acpi_init;
lis3_dev.read = lis3lv02d_acpi_read;
lis3_dev.write = lis3lv02d_acpi_write;
@@ -294,23 +287,8 @@
strcpy(acpi_device_class(device), ACPI_MDPS_CLASS);
device->driver_data = &lis3_dev;
- lis3lv02d_acpi_read(device->handle, WHO_AM_I, &lis3_dev.whoami);
- switch (lis3_dev.whoami) {
- case LIS_DOUBLE_ID:
- printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
- lis3_dev.read_data = lis3lv02d_read_16;
- lis3_dev.mdps_max_val = 2048;
- break;
- case LIS_SINGLE_ID:
- printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
- lis3_dev.read_data = lis3lv02d_read_8;
- lis3_dev.mdps_max_val = 128;
- break;
- default:
- printk(KERN_ERR DRIVER_NAME
- ": unknown sensor type 0x%X\n", lis3_dev.whoami);
- return -EINVAL;
- }
+ /* obtain IRQ number of our device from ACPI */
+ lis3lv02d_enum_resources(device);
/* If possible use a "standard" axes order */
if (dmi_check_system(lis3lv02d_dmi_ids) == 0) {
@@ -319,18 +297,17 @@
lis3_dev.ac = lis3lv02d_axis_normal;
}
- INIT_WORK(&hpled_led.work, delayed_set_status_worker);
- ret = led_classdev_register(NULL, &hpled_led.led_classdev);
+ /* call the core layer do its init */
+ ret = lis3lv02d_init_device(&lis3_dev);
if (ret)
return ret;
- /* obtain IRQ number of our device from ACPI */
- lis3lv02d_enum_resources(lis3_dev.device);
-
- ret = lis3lv02d_init_device(&lis3_dev);
+ INIT_WORK(&hpled_led.work, delayed_set_status_worker);
+ ret = led_classdev_register(NULL, &hpled_led.led_classdev);
if (ret) {
+ lis3lv02d_joystick_disable();
+ lis3lv02d_poweroff(&lis3_dev);
flush_work(&hpled_led.work);
- led_classdev_unregister(&hpled_led.led_classdev);
return ret;
}
@@ -343,7 +320,7 @@
return -EINVAL;
lis3lv02d_joystick_disable();
- lis3lv02d_poweroff(device->handle);
+ lis3lv02d_poweroff(&lis3_dev);
flush_work(&hpled_led.work);
led_classdev_unregister(&hpled_led.led_classdev);
@@ -356,7 +333,7 @@
static int lis3lv02d_suspend(struct acpi_device *device, pm_message_t state)
{
/* make sure the device is off when we suspend */
- lis3lv02d_poweroff(device->handle);
+ lis3lv02d_poweroff(&lis3_dev);
return 0;
}
@@ -365,9 +342,9 @@
/* put back the device in the right state (ACPI might turn it on) */
mutex_lock(&lis3_dev.lock);
if (lis3_dev.usage > 0)
- lis3lv02d_poweron(device->handle);
+ lis3lv02d_poweron(&lis3_dev);
else
- lis3lv02d_poweroff(device->handle);
+ lis3lv02d_poweroff(&lis3_dev);
mutex_unlock(&lis3_dev.lock);
return 0;
}
diff --git a/drivers/hwmon/lis3lv02d.c b/drivers/hwmon/lis3lv02d.c
index eeae7c9..778eb77 100644
--- a/drivers/hwmon/lis3lv02d.c
+++ b/drivers/hwmon/lis3lv02d.c
@@ -36,7 +36,6 @@
#include <linux/freezer.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
-#include <acpi/acpi_drivers.h>
#include <asm/atomic.h>
#include "lis3lv02d.h"
@@ -53,18 +52,27 @@
* joystick.
*/
-struct acpi_lis3lv02d lis3_dev = {
+struct lis3lv02d lis3_dev = {
.misc_wait = __WAIT_QUEUE_HEAD_INITIALIZER(lis3_dev.misc_wait),
};
EXPORT_SYMBOL_GPL(lis3_dev);
-static s16 lis3lv02d_read_16(acpi_handle handle, int reg)
+static s16 lis3lv02d_read_8(struct lis3lv02d *lis3, int reg)
+{
+ s8 lo;
+ if (lis3->read(lis3, reg, &lo) < 0)
+ return 0;
+
+ return lo;
+}
+
+static s16 lis3lv02d_read_16(struct lis3lv02d *lis3, int reg)
{
u8 lo, hi;
- lis3_dev.read(handle, reg, &lo);
- lis3_dev.read(handle, reg + 1, &hi);
+ lis3->read(lis3, reg - 1, &lo);
+ lis3->read(lis3, reg, &hi);
/* In "12 bit right justified" mode, bit 6, bit 7, bit 8 = bit 5 */
return (s16)((hi << 8) | lo);
}
@@ -86,36 +94,36 @@
/**
* lis3lv02d_get_xyz - Get X, Y and Z axis values from the accelerometer
- * @handle: the handle to the device
- * @x: where to store the X axis value
- * @y: where to store the Y axis value
- * @z: where to store the Z axis value
+ * @lis3: pointer to the device struct
+ * @x: where to store the X axis value
+ * @y: where to store the Y axis value
+ * @z: where to store the Z axis value
*
* Note that 40Hz input device can eat up about 10% CPU at 800MHZ
*/
-static void lis3lv02d_get_xyz(acpi_handle handle, int *x, int *y, int *z)
+static void lis3lv02d_get_xyz(struct lis3lv02d *lis3, int *x, int *y, int *z)
{
int position[3];
- position[0] = lis3_dev.read_data(handle, OUTX);
- position[1] = lis3_dev.read_data(handle, OUTY);
- position[2] = lis3_dev.read_data(handle, OUTZ);
+ position[0] = lis3_dev.read_data(lis3, OUTX);
+ position[1] = lis3_dev.read_data(lis3, OUTY);
+ position[2] = lis3_dev.read_data(lis3, OUTZ);
*x = lis3lv02d_get_axis(lis3_dev.ac.x, position);
*y = lis3lv02d_get_axis(lis3_dev.ac.y, position);
*z = lis3lv02d_get_axis(lis3_dev.ac.z, position);
}
-void lis3lv02d_poweroff(acpi_handle handle)
+void lis3lv02d_poweroff(struct lis3lv02d *lis3)
{
lis3_dev.is_on = 0;
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweroff);
-void lis3lv02d_poweron(acpi_handle handle)
+void lis3lv02d_poweron(struct lis3lv02d *lis3)
{
lis3_dev.is_on = 1;
- lis3_dev.init(handle);
+ lis3_dev.init(lis3);
}
EXPORT_SYMBOL_GPL(lis3lv02d_poweron);
@@ -124,13 +132,13 @@
* device will always be on until a call to lis3lv02d_decrease_use(). Not to be
* used from interrupt context.
*/
-static void lis3lv02d_increase_use(struct acpi_lis3lv02d *dev)
+static void lis3lv02d_increase_use(struct lis3lv02d *dev)
{
mutex_lock(&dev->lock);
dev->usage++;
if (dev->usage == 1) {
if (!dev->is_on)
- lis3lv02d_poweron(dev->device->handle);
+ lis3lv02d_poweron(dev);
}
mutex_unlock(&dev->lock);
}
@@ -139,12 +147,12 @@
* To be called whenever a usage of the device is stopped.
* It will make sure to turn off the device when there is not usage.
*/
-static void lis3lv02d_decrease_use(struct acpi_lis3lv02d *dev)
+static void lis3lv02d_decrease_use(struct lis3lv02d *dev)
{
mutex_lock(&dev->lock);
dev->usage--;
if (dev->usage == 0)
- lis3lv02d_poweroff(dev->device->handle);
+ lis3lv02d_poweroff(dev);
mutex_unlock(&dev->lock);
}
@@ -291,7 +299,7 @@
int x, y, z;
while (!kthread_should_stop()) {
- lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
input_report_abs(lis3_dev.idev, ABS_X, x - lis3_dev.xcalib);
input_report_abs(lis3_dev.idev, ABS_Y, y - lis3_dev.ycalib);
input_report_abs(lis3_dev.idev, ABS_Z, z - lis3_dev.zcalib);
@@ -325,7 +333,8 @@
static inline void lis3lv02d_calibrate_joystick(void)
{
- lis3lv02d_get_xyz(lis3_dev.device->handle, &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
+ lis3lv02d_get_xyz(&lis3_dev,
+ &lis3_dev.xcalib, &lis3_dev.ycalib, &lis3_dev.zcalib);
}
int lis3lv02d_joystick_enable(void)
@@ -382,7 +391,7 @@
int x, y, z;
lis3lv02d_increase_use(&lis3_dev);
- lis3lv02d_get_xyz(lis3_dev.device->handle, &x, &y, &z);
+ lis3lv02d_get_xyz(&lis3_dev, &x, &y, &z);
lis3lv02d_decrease_use(&lis3_dev);
return sprintf(buf, "(%d,%d,%d)\n", x, y, z);
}
@@ -412,7 +421,7 @@
int val;
lis3lv02d_increase_use(&lis3_dev);
- lis3_dev.read(lis3_dev.device->handle, CTRL_REG1, &ctrl);
+ lis3_dev.read(&lis3_dev, CTRL_REG1, &ctrl);
lis3lv02d_decrease_use(&lis3_dev);
val = (ctrl & (CTRL1_DF0 | CTRL1_DF1)) >> 4;
return sprintf(buf, "%d\n", lis3lv02dl_df_val[val]);
@@ -435,7 +444,7 @@
};
-static int lis3lv02d_add_fs(struct acpi_device *device)
+static int lis3lv02d_add_fs(struct lis3lv02d *lis3)
{
lis3_dev.pdev = platform_device_register_simple(DRIVER_NAME, -1, NULL, 0);
if (IS_ERR(lis3_dev.pdev))
@@ -456,10 +465,29 @@
* Initialise the accelerometer and the various subsystems.
* Should be rather independant of the bus system.
*/
-int lis3lv02d_init_device(struct acpi_lis3lv02d *dev)
+int lis3lv02d_init_device(struct lis3lv02d *dev)
{
+ dev->whoami = lis3lv02d_read_8(dev, WHO_AM_I);
+
+ switch (dev->whoami) {
+ case LIS_DOUBLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 2-byte sensor found\n");
+ dev->read_data = lis3lv02d_read_16;
+ dev->mdps_max_val = 2048;
+ break;
+ case LIS_SINGLE_ID:
+ printk(KERN_INFO DRIVER_NAME ": 1-byte sensor found\n");
+ dev->read_data = lis3lv02d_read_8;
+ dev->mdps_max_val = 128;
+ break;
+ default:
+ printk(KERN_ERR DRIVER_NAME
+ ": unknown sensor type 0x%X\n", lis3_dev.whoami);
+ return -EINVAL;
+ }
+
mutex_init(&dev->lock);
- lis3lv02d_add_fs(dev->device);
+ lis3lv02d_add_fs(dev);
lis3lv02d_increase_use(dev);
if (lis3lv02d_joystick_enable())
@@ -467,10 +495,10 @@
printk("lis3_init_device: irq %d\n", dev->irq);
- /* if we did not get an IRQ from ACPI - we have nothing more to do */
+ /* bail if we did not get an IRQ from the bus layer */
if (!dev->irq) {
printk(KERN_ERR DRIVER_NAME
- ": No IRQ in ACPI. Disabling /dev/freefall\n");
+ ": No IRQ. Disabling /dev/freefall\n");
goto out;
}
diff --git a/drivers/hwmon/lis3lv02d.h b/drivers/hwmon/lis3lv02d.h
index 017fb2b..745ec96 100644
--- a/drivers/hwmon/lis3lv02d.h
+++ b/drivers/hwmon/lis3lv02d.h
@@ -159,14 +159,14 @@
s8 z;
};
-struct acpi_lis3lv02d {
- struct acpi_device *device; /* The ACPI device */
- acpi_status (*init) (acpi_handle handle);
- acpi_status (*write) (acpi_handle handle, int reg, u8 val);
- acpi_status (*read) (acpi_handle handle, int reg, u8 *ret);
+struct lis3lv02d {
+ void *bus_priv; /* used by the bus layer only */
+ int (*init) (struct lis3lv02d *lis3);
+ int (*write) (struct lis3lv02d *lis3, int reg, u8 val);
+ int (*read) (struct lis3lv02d *lis3, int reg, u8 *ret);
u8 whoami; /* 3Ah: 2-byte registries, 3Bh: 1-byte registries */
- s16 (*read_data) (acpi_handle handle, int reg);
+ s16 (*read_data) (struct lis3lv02d *lis3, int reg);
int mdps_max_val;
struct input_dev *idev; /* input device */
@@ -187,11 +187,11 @@
unsigned long misc_opened; /* bit0: whether the device is open */
};
-int lis3lv02d_init_device(struct acpi_lis3lv02d *dev);
+int lis3lv02d_init_device(struct lis3lv02d *lis3);
int lis3lv02d_joystick_enable(void);
void lis3lv02d_joystick_disable(void);
-void lis3lv02d_poweroff(acpi_handle handle);
-void lis3lv02d_poweron(acpi_handle handle);
+void lis3lv02d_poweroff(struct lis3lv02d *lis3);
+void lis3lv02d_poweron(struct lis3lv02d *lis3);
int lis3lv02d_remove_fs(void);
-extern struct acpi_lis3lv02d lis3_dev;
+extern struct lis3lv02d lis3_dev;