regulator: ab3100: Use regulator_list_voltage_table()

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
index 03f4d9c..b088b6c 100644
--- a/drivers/regulator/ab3100.c
+++ b/drivers/regulator/ab3100.c
@@ -45,9 +45,6 @@
  * @regreg: regulator register number in the AB3100
  * @fixed_voltage: a fixed voltage for this regulator, if this
  *          0 the voltages array is used instead.
- * @typ_voltages: an array of available typical voltages for
- *          this regulator
- * @voltages_len: length of the array of available voltages
  */
 struct ab3100_regulator {
 	struct regulator_dev *rdev;
@@ -55,8 +52,6 @@
 	struct ab3100_platform_data *plfdata;
 	u8 regreg;
 	int fixed_voltage;
-	int const *typ_voltages;
-	u8 voltages_len;
 };
 
 /* The order in which registers are initialized */
@@ -80,7 +75,7 @@
 #define LDO_C_VOLTAGE 2650000
 #define LDO_D_VOLTAGE 2650000
 
-static const int ldo_e_buck_typ_voltages[] = {
+static const unsigned int ldo_e_buck_typ_voltages[] = {
 	1800000,
 	1400000,
 	1300000,
@@ -90,7 +85,7 @@
 	900000,
 };
 
-static const int ldo_f_typ_voltages[] = {
+static const unsigned int ldo_f_typ_voltages[] = {
 	1800000,
 	1400000,
 	1300000,
@@ -101,21 +96,21 @@
 	2650000,
 };
 
-static const int ldo_g_typ_voltages[] = {
+static const unsigned int ldo_g_typ_voltages[] = {
 	2850000,
 	2750000,
 	1800000,
 	1500000,
 };
 
-static const int ldo_h_typ_voltages[] = {
+static const unsigned int ldo_h_typ_voltages[] = {
 	2750000,
 	1800000,
 	1500000,
 	1200000,
 };
 
-static const int ldo_k_typ_voltages[] = {
+static const unsigned int ldo_k_typ_voltages[] = {
 	2750000,
 	1800000,
 };
@@ -138,28 +133,18 @@
 	},
 	{
 		.regreg = AB3100_LDO_E,
-		.typ_voltages = ldo_e_buck_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
 	},
 	{
 		.regreg = AB3100_LDO_F,
-		.typ_voltages = ldo_f_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_f_typ_voltages),
 	},
 	{
 		.regreg = AB3100_LDO_G,
-		.typ_voltages = ldo_g_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_g_typ_voltages),
 	},
 	{
 		.regreg = AB3100_LDO_H,
-		.typ_voltages = ldo_h_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_h_typ_voltages),
 	},
 	{
 		.regreg = AB3100_LDO_K,
-		.typ_voltages = ldo_k_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_k_typ_voltages),
 	},
 	{
 		.regreg = AB3100_LDO_EXT,
@@ -167,8 +152,6 @@
 	},
 	{
 		.regreg = AB3100_BUCK,
-		.typ_voltages = ldo_e_buck_typ_voltages,
-		.voltages_len = ARRAY_SIZE(ldo_e_buck_typ_voltages),
 	},
 };
 
@@ -257,16 +240,6 @@
 	return regval & AB3100_REG_ON_MASK;
 }
 
-static int ab3100_list_voltage_regulator(struct regulator_dev *reg,
-					 unsigned selector)
-{
-	struct ab3100_regulator *abreg = reg->reg_data;
-
-	if (selector >= abreg->voltages_len)
-		return -EINVAL;
-	return abreg->typ_voltages[selector];
-}
-
 static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
 {
 	struct ab3100_regulator *abreg = reg->reg_data;
@@ -294,14 +267,14 @@
 	regval &= 0xE0;
 	regval >>= 5;
 
-	if (regval >= abreg->voltages_len) {
+	if (regval >= reg->desc->n_voltages) {
 		dev_err(&reg->dev,
 			"regulator register %02x contains an illegal voltage setting\n",
 			abreg->regreg);
 		return -EINVAL;
 	}
 
-	return abreg->typ_voltages[regval];
+	return reg->desc->volt_table[regval];
 }
 
 static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
@@ -423,7 +396,7 @@
 	.is_enabled  = ab3100_is_enabled_regulator,
 	.get_voltage = ab3100_get_voltage_regulator,
 	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
-	.list_voltage = ab3100_list_voltage_regulator,
+	.list_voltage = regulator_list_voltage_table,
 	.enable_time = ab3100_enable_time_regulator,
 };
 
@@ -434,7 +407,7 @@
 	.get_voltage = ab3100_get_voltage_regulator,
 	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
 	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
-	.list_voltage = ab3100_list_voltage_regulator,
+	.list_voltage = regulator_list_voltage_table,
 	.enable_time = ab3100_enable_time_regulator,
 };
 
@@ -479,6 +452,7 @@
 		.id   = AB3100_LDO_E,
 		.ops  = &regulator_ops_variable_sleepable,
 		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
+		.volt_table = ldo_e_buck_typ_voltages,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
@@ -487,6 +461,7 @@
 		.id   = AB3100_LDO_F,
 		.ops  = &regulator_ops_variable,
 		.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
+		.volt_table = ldo_f_typ_voltages,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
@@ -495,6 +470,7 @@
 		.id   = AB3100_LDO_G,
 		.ops  = &regulator_ops_variable,
 		.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
+		.volt_table = ldo_g_typ_voltages,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
@@ -503,6 +479,7 @@
 		.id   = AB3100_LDO_H,
 		.ops  = &regulator_ops_variable,
 		.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
+		.volt_table = ldo_h_typ_voltages,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},
@@ -511,6 +488,7 @@
 		.id   = AB3100_LDO_K,
 		.ops  = &regulator_ops_variable,
 		.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
+		.volt_table = ldo_k_typ_voltages,
 		.type = REGULATOR_VOLTAGE,
 		.owner = THIS_MODULE,
 	},