| /* |
| * arch/sh/mm/ioremap.c |
| * |
| * Re-map IO memory to kernel address space so that we can access it. |
| * This is needed for high PCI addresses that aren't mapped in the |
| * 640k-1MB IO memory area on PC's |
| * |
| * (C) Copyright 1995 1996 Linus Torvalds |
| * (C) Copyright 2005, 2006 Paul Mundt |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| */ |
| #include <linux/vmalloc.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/pci.h> |
| #include <asm/io.h> |
| #include <asm/page.h> |
| #include <asm/pgalloc.h> |
| #include <asm/addrspace.h> |
| #include <asm/cacheflush.h> |
| #include <asm/tlbflush.h> |
| |
| static inline void remap_area_pte(pte_t * pte, unsigned long address, |
| unsigned long size, unsigned long phys_addr, unsigned long flags) |
| { |
| unsigned long end; |
| unsigned long pfn; |
| pgprot_t pgprot = __pgprot(_PAGE_PRESENT | _PAGE_RW | |
| _PAGE_DIRTY | _PAGE_ACCESSED | |
| _PAGE_HW_SHARED | _PAGE_FLAGS_HARD | flags); |
| |
| address &= ~PMD_MASK; |
| end = address + size; |
| if (end > PMD_SIZE) |
| end = PMD_SIZE; |
| if (address >= end) |
| BUG(); |
| pfn = phys_addr >> PAGE_SHIFT; |
| do { |
| if (!pte_none(*pte)) { |
| printk("remap_area_pte: page already exists\n"); |
| BUG(); |
| } |
| set_pte(pte, pfn_pte(pfn, pgprot)); |
| address += PAGE_SIZE; |
| pfn++; |
| pte++; |
| } while (address && (address < end)); |
| } |
| |
| static inline int remap_area_pmd(pmd_t * pmd, unsigned long address, |
| unsigned long size, unsigned long phys_addr, unsigned long flags) |
| { |
| unsigned long end; |
| |
| address &= ~PGDIR_MASK; |
| end = address + size; |
| if (end > PGDIR_SIZE) |
| end = PGDIR_SIZE; |
| phys_addr -= address; |
| if (address >= end) |
| BUG(); |
| do { |
| pte_t * pte = pte_alloc_kernel(pmd, address); |
| if (!pte) |
| return -ENOMEM; |
| remap_area_pte(pte, address, end - address, address + phys_addr, flags); |
| address = (address + PMD_SIZE) & PMD_MASK; |
| pmd++; |
| } while (address && (address < end)); |
| return 0; |
| } |
| |
| int remap_area_pages(unsigned long address, unsigned long phys_addr, |
| unsigned long size, unsigned long flags) |
| { |
| int error; |
| pgd_t * dir; |
| unsigned long end = address + size; |
| |
| phys_addr -= address; |
| dir = pgd_offset_k(address); |
| flush_cache_all(); |
| if (address >= end) |
| BUG(); |
| do { |
| pud_t *pud; |
| pmd_t *pmd; |
| |
| error = -ENOMEM; |
| |
| pud = pud_alloc(&init_mm, dir, address); |
| if (!pud) |
| break; |
| pmd = pmd_alloc(&init_mm, pud, address); |
| if (!pmd) |
| break; |
| if (remap_area_pmd(pmd, address, end - address, |
| phys_addr + address, flags)) |
| break; |
| error = 0; |
| address = (address + PGDIR_SIZE) & PGDIR_MASK; |
| dir++; |
| } while (address && (address < end)); |
| flush_tlb_all(); |
| return error; |
| } |
| |
| /* |
| * Remap an arbitrary physical address space into the kernel virtual |
| * address space. Needed when the kernel wants to access high addresses |
| * directly. |
| * |
| * NOTE! We need to allow non-page-aligned mappings too: we will obviously |
| * have to convert them into an offset in a page-aligned mapping, but the |
| * caller shouldn't need to know that small detail. |
| */ |
| void __iomem *__ioremap(unsigned long phys_addr, unsigned long size, |
| unsigned long flags) |
| { |
| struct vm_struct * area; |
| unsigned long offset, last_addr, addr, orig_addr; |
| |
| /* Don't allow wraparound or zero size */ |
| last_addr = phys_addr + size - 1; |
| if (!size || last_addr < phys_addr) |
| return NULL; |
| |
| /* |
| * Don't remap the low PCI/ISA area, it's always mapped.. |
| */ |
| if (phys_addr >= 0xA0000 && last_addr < 0x100000) |
| return (void __iomem *)phys_to_virt(phys_addr); |
| |
| /* |
| * If we're on an SH7751 or SH7780 PCI controller, PCI memory is |
| * mapped at the end of the address space (typically 0xfd000000) |
| * in a non-translatable area, so mapping through page tables for |
| * this area is not only pointless, but also fundamentally |
| * broken. Just return the physical address instead. |
| * |
| * For boards that map a small PCI memory aperture somewhere in |
| * P1/P2 space, ioremap() will already do the right thing, |
| * and we'll never get this far. |
| */ |
| if (is_pci_memaddr(phys_addr) && is_pci_memaddr(last_addr)) |
| return (void __iomem *)phys_addr; |
| |
| /* |
| * Don't allow anybody to remap normal RAM that we're using.. |
| */ |
| if (phys_addr < virt_to_phys(high_memory)) |
| return NULL; |
| |
| /* |
| * Mappings have to be page-aligned |
| */ |
| offset = phys_addr & ~PAGE_MASK; |
| phys_addr &= PAGE_MASK; |
| size = PAGE_ALIGN(last_addr+1) - phys_addr; |
| |
| /* |
| * Ok, go for it.. |
| */ |
| area = get_vm_area(size, VM_IOREMAP); |
| if (!area) |
| return NULL; |
| area->phys_addr = phys_addr; |
| orig_addr = addr = (unsigned long)area->addr; |
| |
| #ifdef CONFIG_32BIT |
| /* |
| * First try to remap through the PMB once a valid VMA has been |
| * established. Smaller allocations (or the rest of the size |
| * remaining after a PMB mapping due to the size not being |
| * perfectly aligned on a PMB size boundary) are then mapped |
| * through the UTLB using conventional page tables. |
| * |
| * PMB entries are all pre-faulted. |
| */ |
| if (unlikely(size >= 0x1000000)) { |
| unsigned long mapped = pmb_remap(addr, phys_addr, size, flags); |
| |
| if (likely(mapped)) { |
| addr += mapped; |
| phys_addr += mapped; |
| size -= mapped; |
| } |
| } |
| #endif |
| |
| if (likely(size)) |
| if (remap_area_pages(addr, phys_addr, size, flags)) { |
| vunmap((void *)orig_addr); |
| return NULL; |
| } |
| |
| return (void __iomem *)(offset + (char *)orig_addr); |
| } |
| EXPORT_SYMBOL(__ioremap); |
| |
| void __iounmap(void __iomem *addr) |
| { |
| unsigned long vaddr = (unsigned long __force)addr; |
| struct vm_struct *p; |
| |
| if (PXSEG(vaddr) < P3SEG || is_pci_memaddr(vaddr)) |
| return; |
| |
| #ifdef CONFIG_32BIT |
| /* |
| * Purge any PMB entries that may have been established for this |
| * mapping, then proceed with conventional VMA teardown. |
| * |
| * XXX: Note that due to the way that remove_vm_area() does |
| * matching of the resultant VMA, we aren't able to fast-forward |
| * the address past the PMB space until the end of the VMA where |
| * the page tables reside. As such, unmap_vm_area() will be |
| * forced to linearly scan over the area until it finds the page |
| * tables where PTEs that need to be unmapped actually reside, |
| * which is far from optimal. Perhaps we need to use a separate |
| * VMA for the PMB mappings? |
| * -- PFM. |
| */ |
| pmb_unmap(vaddr); |
| #endif |
| |
| p = remove_vm_area((void *)(vaddr & PAGE_MASK)); |
| if (!p) { |
| printk(KERN_ERR "%s: bad address %p\n", __FUNCTION__, addr); |
| return; |
| } |
| |
| kfree(p); |
| } |
| EXPORT_SYMBOL(__iounmap); |