[SCSI] aacraid: Fix jbod operations scan issues
As JBOD devices (really just Simple Single Drive Volumes exported to
the SCSI channel) are managed, they fail to update correctly when the
driver triggers a SCSI scan. In addition, the ability to change
multiple arrays or JBODs at the same time was resulting in dropped
scans, set up a mechanism to issue a list of single target scans on a
single configuration change notification from the Firmware.
Performed some additional sundry cosmetic code style cleanups.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index e7a4c6f..289304a 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -906,15 +906,22 @@
case AifEnAddJBOD:
case AifEnDeleteJBOD:
container = le32_to_cpu(((__le32 *)aifcmd->data)[1]);
- if ((container >> 28))
+ if ((container >> 28)) {
+ container = (u32)-1;
break;
+ }
channel = (container >> 24) & 0xF;
- if (channel >= dev->maximum_num_channels)
+ if (channel >= dev->maximum_num_channels) {
+ container = (u32)-1;
break;
+ }
id = container & 0xFFFF;
- if (id >= dev->maximum_num_physicals)
+ if (id >= dev->maximum_num_physicals) {
+ container = (u32)-1;
break;
+ }
lun = (container >> 16) & 0xFF;
+ container = (u32)-1;
channel = aac_phys_to_logical(channel);
device_config_needed =
(((__le32 *)aifcmd->data)[0] ==
@@ -933,13 +940,18 @@
case EM_DRIVE_REMOVAL:
container = le32_to_cpu(
((__le32 *)aifcmd->data)[2]);
- if ((container >> 28))
+ if ((container >> 28)) {
+ container = (u32)-1;
break;
+ }
channel = (container >> 24) & 0xF;
- if (channel >= dev->maximum_num_channels)
+ if (channel >= dev->maximum_num_channels) {
+ container = (u32)-1;
break;
+ }
id = container & 0xFFFF;
lun = (container >> 16) & 0xFF;
+ container = (u32)-1;
if (id >= dev->maximum_num_physicals) {
/* legacy dev_t ? */
if ((0x2000 <= id) || lun || channel ||
@@ -1025,9 +1037,10 @@
break;
}
+ container = 0;
+retry_next:
if (device_config_needed == NOTHING)
- for (container = 0; container < dev->maximum_num_containers;
- ++container) {
+ for (; container < dev->maximum_num_containers; ++container) {
if ((dev->fsa_dev[container].config_waiting_on == 0) &&
(dev->fsa_dev[container].config_needed != NOTHING) &&
time_before(jiffies, dev->fsa_dev[container].config_waiting_stamp + AIF_SNIFF_TIMEOUT)) {
@@ -1110,6 +1123,11 @@
}
if (device_config_needed == ADD)
scsi_add_device(dev->scsi_host_ptr, channel, id, lun);
+ if (channel == CONTAINER_CHANNEL) {
+ container++;
+ device_config_needed = NOTHING;
+ goto retry_next;
+ }
}
static int _aac_reset_adapter(struct aac_dev *aac, int forced)
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index c109f63..c444527 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -401,6 +401,8 @@
static int aac_slave_configure(struct scsi_device *sdev)
{
struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata;
+ if (aac->jbod && (sdev->type == TYPE_DISK))
+ sdev->removable = 1;
if ((sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) != CONTAINER_CHANNEL) &&
(!aac->jbod || sdev->inq_periph_qual) &&
@@ -1106,7 +1108,7 @@
aac->pdev = pdev;
aac->name = aac_driver_template.name;
aac->id = shost->unique_id;
- aac->cardtype = index;
+ aac->cardtype = index;
INIT_LIST_HEAD(&aac->entry);
aac->fibs = kmalloc(sizeof(struct fib) * (shost->can_queue + AAC_NUM_MGT_FIB), GFP_KERNEL);
@@ -1146,19 +1148,19 @@
goto out_deinit;
/*
- * Lets override negotiations and drop the maximum SG limit to 34
- */
+ * Lets override negotiations and drop the maximum SG limit to 34
+ */
if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) &&
(shost->sg_tablesize > 34)) {
shost->sg_tablesize = 34;
shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- }
+ }
- if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
+ if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) &&
(shost->sg_tablesize > 17)) {
shost->sg_tablesize = 17;
shost->max_sectors = (shost->sg_tablesize * 8) + 112;
- }
+ }
error = pci_set_dma_max_seg_size(pdev,
(aac->adapter_info.options & AAC_OPT_NEW_COMM) ?
@@ -1174,7 +1176,7 @@
else
aac->printf_enabled = 0;
- /*
+ /*
* max channel will be the physical channels plus 1 virtual channel
* all containers are on the virtual channel 0 (CONTAINER_CHANNEL)
* physical channels are address by their actual physical number+1