commit a485df4b4404379786c4bdd258bc528b2617449d
author Vinod Koul <vinod.koul@linux.intel.com> Fri Oct 14 10:47:38 2011 +0530
committer Vinod Koul <vinod.koul@linux.intel.com> Mon Oct 31 09:40:26 2011 +0530
tree 67244495fab89846568cf40d3b7c3a2bd011133e
parent 05f5799cbe5c9e2c03f604b3de5783cf4d726227

spi, serial: move to dma_transfer_direction

fixup usage of dma direction by introducing dma_transfer_direction,
this patch moves spi, serial drivers to use new enum

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>

drivers/tty/serial/amba-pl011.c

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index f5f6831..460ff7d 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -268,7 +268,7 @@
 	struct dma_slave_config tx_conf = {
 		.dst_addr = uap->port.mapbase + UART01x_DR,
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-		.direction = DMA_TO_DEVICE,
+		.direction = DMA_MEM_TO_DEV,
 		.dst_maxburst = uap->fifosize >> 1,
 	};
 	struct dma_chan *chan;
@@ -301,7 +301,7 @@
 		struct dma_slave_config rx_conf = {
 			.src_addr = uap->port.mapbase + UART01x_DR,
 			.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
-			.direction = DMA_FROM_DEVICE,
+			.direction = DMA_DEV_TO_MEM,
 			.src_maxburst = uap->fifosize >> 1,
 		};
 
@@ -480,7 +480,7 @@
 		return -EBUSY;
 	}
 
-	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE,
+	desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV,
 					     DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE);
@@ -676,7 +676,7 @@
 		&uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a;
 	dma_dev = rxchan->device;
 	desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1,
-					DMA_FROM_DEVICE,
+					DMA_DEV_TO_MEM,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	/*
 	 * If the DMA engine is busy and cannot prepare a

drivers/tty/serial/pch_uart.c

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index b46218d..73201a1 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -747,7 +747,7 @@
 	sg_dma_address(sg) = priv->rx_buf_dma;
 
 	desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx,
-			sg, 1, DMA_FROM_DEVICE,
+			sg, 1, DMA_DEV_TO_MEM,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 
 	if (!desc)
@@ -906,7 +906,7 @@
 	}
 
 	desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx,
-					priv->sg_tx_p, nent, DMA_TO_DEVICE,
+					priv->sg_tx_p, nent, DMA_MEM_TO_DEV,
 					DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n",

drivers/tty/serial/sh-sci.c

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index dbd32a1..3683a69 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1207,7 +1207,7 @@
 		struct dma_async_tx_descriptor *desc;
 
 		desc = chan->device->device_prep_slave_sg(chan,
-			sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT);
+			sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
 
 		if (desc) {
 			s->desc_rx[i] = desc;
@@ -1322,7 +1322,7 @@
 	BUG_ON(!sg_dma_len(sg));
 
 	desc = chan->device->device_prep_slave_sg(chan,
-			sg, s->sg_len_tx, DMA_TO_DEVICE,
+			sg, s->sg_len_tx, DMA_MEM_TO_DEV,
 			DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
 	if (!desc) {
 		/* switch to PIO */