drivers/net/wireless/iwlwifi/dvm/power.c - kernel/msm-4.9 - Gitiles

 /******************************************************************************
  *
  * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
  *
  * Portions of this file are derived from the ipw3945 project, as well
  * as portions of the ieee80211 subsystem header files.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  * You should have received a copy of the GNU General Public License along with
  * this program; if not, write to the Free Software Foundation, Inc.,
  * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
  *
  * The full GNU General Public License is included in this distribution in the
  * file called LICENSE.
  *
  * Contact Information:
  *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *****************************************************************************/


 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <net/mac80211.h>
 #include "iwl-io.h"
 #include "iwl-debug.h"
 #include "iwl-trans.h"
 #include "iwl-modparams.h"
 #include "dev.h"
 #include "agn.h"
 #include "commands.h"
 #include "power.h"

 static bool force_cam;
 module_param(force_cam, bool, 0644);
 MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");

 /*
  * Setting power level allows the card to go to sleep when not busy.
  *
  * We calculate a sleep command based on the required latency, which
  * we get from mac80211. In order to handle thermal throttling, we can
  * also use pre-defined power levels.
  */

 /*
  * This defines the old power levels. They are still used by default
  * (level 1) and for thermal throttle (levels 3 through 5)
  */

 struct iwl_power_vec_entry {
 	struct iwl_powertable_cmd cmd;
 	u8 no_dtim;	/* number of skip dtim */
 };

 #define IWL_DTIM_RANGE_0_MAX	2
 #define IWL_DTIM_RANGE_1_MAX	10

 #define NOSLP cpu_to_le16(0), 0, 0
 #define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
 #define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK |	\
 		IWL_POWER_POWER_MANAGEMENT_ENA_MSK | \
 		IWL_POWER_ADVANCE_PM_ENA_MSK)
 #define ASLP_TOUT(T) cpu_to_le32(T)
 #define TU_TO_USEC 1024
 #define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
 #define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
 				     cpu_to_le32(X1), \
 				     cpu_to_le32(X2), \
 				     cpu_to_le32(X3), \
 				     cpu_to_le32(X4)}
 /* default power management (not Tx power) table values */
 /* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
 /* DTIM 0 - 2 */
 static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
 };


 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
 /* DTIM 3 - 10 */
 static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
 };

 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
 /* DTIM 11 - */
 static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
 	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
 	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
 };

 /* advance power management */
 /* DTIM 0 - 2 */
 static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
 };


 /* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
 /* DTIM 3 - 10 */
 static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
 };

 /* for DTIM period > IWL_DTIM_RANGE_1_MAX */
 /* DTIM 11 - */
 static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
 	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
 		SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
 };

 static void iwl_static_sleep_cmd(struct iwl_priv *priv,
 				 struct iwl_powertable_cmd *cmd,
 				 enum iwl_power_level lvl, int period)
 {
 	const struct iwl_power_vec_entry *table;
 	int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
 	int i;
 	u8 skip;
 	u32 slp_itrvl;

 	if (priv->lib->adv_pm) {
 		table = apm_range_2;
 		if (period <= IWL_DTIM_RANGE_1_MAX)
 			table = apm_range_1;
 		if (period <= IWL_DTIM_RANGE_0_MAX)
 			table = apm_range_0;
 	} else {
 		table = range_2;
 		if (period <= IWL_DTIM_RANGE_1_MAX)
 			table = range_1;
 		if (period <= IWL_DTIM_RANGE_0_MAX)
 			table = range_0;
 	}

 	if (WARN_ON(lvl < 0 || lvl >= IWL_POWER_NUM))
 		memset(cmd, 0, sizeof(*cmd));
 	else
 		*cmd = table[lvl].cmd;

 	if (period == 0) {
 		skip = 0;
 		period = 1;
 		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
 			max_sleep[i] =  1;

 	} else {
 		skip = table[lvl].no_dtim;
 		for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
 			max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
 		max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
 	}

 	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
 	/* figure out the listen interval based on dtim period and skip */
 	if (slp_itrvl == 0xFF)
 		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
 			cpu_to_le32(period * (skip + 1));

 	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
 	if (slp_itrvl > period)
 		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
 			cpu_to_le32((slp_itrvl / period) * period);

 	if (skip)
 		cmd->flags |= IWL_POWER_SLEEP_OVER_DTIM_MSK;
 	else
 		cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;

 	if (priv->cfg->base_params->shadow_reg_enable)
 		cmd->flags |= IWL_POWER_SHADOW_REG_ENA;
 	else
 		cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;

 	if (iwl_advanced_bt_coexist(priv)) {
 		if (!priv->lib->bt_params->bt_sco_disable)
 			cmd->flags |= IWL_POWER_BT_SCO_ENA;
 		else
 			cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
 	}


 	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
 	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
 		cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
 			cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);

 	/* enforce max sleep interval */
 	for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
 		if (le32_to_cpu(cmd->sleep_interval[i]) >
 		    (max_sleep[i] * period))
 			cmd->sleep_interval[i] =
 				cpu_to_le32(max_sleep[i] * period);
 		if (i != (IWL_POWER_VEC_SIZE - 1)) {
 			if (le32_to_cpu(cmd->sleep_interval[i]) >
 			    le32_to_cpu(cmd->sleep_interval[i+1]))
 				cmd->sleep_interval[i] =
 					cmd->sleep_interval[i+1];
 		}
 	}

 	if (priv->power_data.bus_pm)
 		cmd->flags |= IWL_POWER_PCI_PM_MSK;
 	else
 		cmd->flags &= ~IWL_POWER_PCI_PM_MSK;

 	IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
 			skip, period);
 	/* The power level here is 0-4 (used as array index), but user expects
 	to see 1-5 (according to spec). */
 	IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
 }

 static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
 				    struct iwl_powertable_cmd *cmd)
 {
 	memset(cmd, 0, sizeof(*cmd));

 	if (priv->power_data.bus_pm)
 		cmd->flags |= IWL_POWER_PCI_PM_MSK;

 	IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
 }

 static int iwl_set_power(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd)
 {
 	IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
 	IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
 	IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
 	IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
 	IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
 			le32_to_cpu(cmd->sleep_interval[0]),
 			le32_to_cpu(cmd->sleep_interval[1]),
 			le32_to_cpu(cmd->sleep_interval[2]),
 			le32_to_cpu(cmd->sleep_interval[3]),
 			le32_to_cpu(cmd->sleep_interval[4]));

 	return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0,
 				sizeof(struct iwl_powertable_cmd), cmd);
 }

 static void iwl_power_build_cmd(struct iwl_priv *priv,
 				struct iwl_powertable_cmd *cmd)
 {
 	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
 	int dtimper;

 	if (force_cam) {
 		iwl_power_sleep_cam_cmd(priv, cmd);
 		return;
 	}

 	dtimper = priv->hw->conf.ps_dtim_period ?: 1;

 	if (priv->wowlan)
 		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
 	else if (!priv->lib->no_idle_support &&
 		 priv->hw->conf.flags & IEEE80211_CONF_IDLE)
 		iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
 	else if (iwl_tt_is_low_power_state(priv)) {
 		/* in thermal throttling low power state */
 		iwl_static_sleep_cmd(priv, cmd,
 		    iwl_tt_current_power_mode(priv), dtimper);
 	} else if (!enabled)
 		iwl_power_sleep_cam_cmd(priv, cmd);
 	else if (priv->power_data.debug_sleep_level_override >= 0)
 		iwl_static_sleep_cmd(priv, cmd,
 				     priv->power_data.debug_sleep_level_override,
 				     dtimper);
 	else {
 		/* Note that the user parameter is 1-5 (according to spec),
 		but we pass 0-4 because it acts as an array index. */
 		if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
 		    iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
 			iwl_static_sleep_cmd(priv, cmd,
 				iwlwifi_mod_params.power_level - 1, dtimper);
 		else
 			iwl_static_sleep_cmd(priv, cmd,
 				IWL_POWER_INDEX_1, dtimper);
 	}
 }

 int iwl_power_set_mode(struct iwl_priv *priv, struct iwl_powertable_cmd *cmd,
 		       bool force)
 {
 	int ret;
 	bool update_chains;

 	lockdep_assert_held(&priv->mutex);

 	/* Don't update the RX chain when chain noise calibration is running */
 	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE ||
 			priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;

 	if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
 		return 0;

 	if (!iwl_is_ready_rf(priv))
 		return -EIO;

 	/* scan complete use sleep_power_next, need to be updated */
 	memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
 	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
 		IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
 		return 0;
 	}

 	if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
 		iwl_dvm_set_pmi(priv, true);

 	ret = iwl_set_power(priv, cmd);
 	if (!ret) {
 		if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
 			iwl_dvm_set_pmi(priv, false);

 		if (update_chains)
 			iwl_update_chain_flags(priv);
 		else
 			IWL_DEBUG_POWER(priv,
 					"Cannot update the power, chain noise "
 					"calibration running: %d\n",
 					priv->chain_noise_data.state);

 		memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
 	} else
 		IWL_ERR(priv, "set power fail, ret = %d\n", ret);

 	return ret;
 }

 int iwl_power_update_mode(struct iwl_priv *priv, bool force)
 {
 	struct iwl_powertable_cmd cmd;

 	iwl_power_build_cmd(priv, &cmd);
 	return iwl_power_set_mode(priv, &cmd, force);
 }

 /* initialize to default */
 void iwl_power_initialize(struct iwl_priv *priv)
 {
 	priv->power_data.bus_pm = priv->trans->pm_support;

 	priv->power_data.debug_sleep_level_override = -1;

 	memset(&priv->power_data.sleep_cmd, 0,
 		sizeof(priv->power_data.sleep_cmd));
 }
	/******************************************************************************
	*
	* Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved.
	*
	* Portions of this file are derived from the ipw3945 project, as well
	* as portions of the ieee80211 subsystem header files.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	* You should have received a copy of the GNU General Public License along with
	* this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
	*
	* The full GNU General Public License is included in this distribution in the
	* file called LICENSE.
	*
	* Contact Information:
	* Intel Linux Wireless <ilw@linux.intel.com>
	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	*****************************************************************************/


	#include <linux/kernel.h>
	#include <linux/module.h>
	#include <linux/slab.h>
	#include <net/mac80211.h>
	#include "iwl-io.h"
	#include "iwl-debug.h"
	#include "iwl-trans.h"
	#include "iwl-modparams.h"
	#include "dev.h"
	#include "agn.h"
	#include "commands.h"
	#include "power.h"

	static bool force_cam;
	module_param(force_cam, bool, 0644);
	MODULE_PARM_DESC(force_cam, "force continuously aware mode (no power saving at all)");

	/*
	* Setting power level allows the card to go to sleep when not busy.
	*
	* We calculate a sleep command based on the required latency, which
	* we get from mac80211. In order to handle thermal throttling, we can
	* also use pre-defined power levels.
	*/

	/*
	* This defines the old power levels. They are still used by default
	* (level 1) and for thermal throttle (levels 3 through 5)
	*/

	struct iwl_power_vec_entry {
	struct iwl_powertable_cmd cmd;
	u8 no_dtim; /* number of skip dtim */
	};

	#define IWL_DTIM_RANGE_0_MAX 2
	#define IWL_DTIM_RANGE_1_MAX 10

	#define NOSLP cpu_to_le16(0), 0, 0
	#define SLP IWL_POWER_DRIVER_ALLOW_SLEEP_MSK, 0, 0
	#define ASLP (IWL_POWER_POWER_SAVE_ENA_MSK \| \
	IWL_POWER_POWER_MANAGEMENT_ENA_MSK \| \
	IWL_POWER_ADVANCE_PM_ENA_MSK)
	#define ASLP_TOUT(T) cpu_to_le32(T)
	#define TU_TO_USEC 1024
	#define SLP_TOUT(T) cpu_to_le32((T) * TU_TO_USEC)
	#define SLP_VEC(X0, X1, X2, X3, X4) {cpu_to_le32(X0), \
	cpu_to_le32(X1), \
	cpu_to_le32(X2), \
	cpu_to_le32(X3), \
	cpu_to_le32(X4)}
	/* default power management (not Tx power) table values */
	/* for DTIM period 0 through IWL_DTIM_RANGE_0_MAX */
	/* DTIM 0 - 2 */
	static const struct iwl_power_vec_entry range_0[IWL_POWER_NUM] = {
	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 1, 2, 2, 0xFF)}, 0},
	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 2, 2, 0xFF)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 2, 2, 2, 0xFF)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 2, 4, 4, 0xFF)}, 1},
	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 2, 4, 6, 0xFF)}, 2}
	};


	/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
	/* DTIM 3 - 10 */
	static const struct iwl_power_vec_entry range_1[IWL_POWER_NUM] = {
	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 4)}, 0},
	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(1, 2, 3, 4, 7)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 4, 6, 7, 9)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 4, 6, 9, 10)}, 1},
	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(2, 4, 6, 10, 10)}, 2}
	};

	/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
	/* DTIM 11 - */
	static const struct iwl_power_vec_entry range_2[IWL_POWER_NUM] = {
	{{SLP, SLP_TOUT(200), SLP_TOUT(500), SLP_VEC(1, 2, 3, 4, 0xFF)}, 0},
	{{SLP, SLP_TOUT(200), SLP_TOUT(300), SLP_VEC(2, 4, 6, 7, 0xFF)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(100), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
	{{SLP, SLP_TOUT(50), SLP_TOUT(25), SLP_VEC(2, 7, 9, 9, 0xFF)}, 0},
	{{SLP, SLP_TOUT(25), SLP_TOUT(25), SLP_VEC(4, 7, 10, 10, 0xFF)}, 0}
	};

	/* advance power management */
	/* DTIM 0 - 2 */
	static const struct iwl_power_vec_entry apm_range_0[IWL_POWER_NUM] = {
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
	};


	/* for DTIM period IWL_DTIM_RANGE_0_MAX + 1 through IWL_DTIM_RANGE_1_MAX */
	/* DTIM 3 - 10 */
	static const struct iwl_power_vec_entry apm_range_1[IWL_POWER_NUM] = {
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 6, 8, 0xFF), 0}, 2}
	};

	/* for DTIM period > IWL_DTIM_RANGE_1_MAX */
	/* DTIM 11 - */
	static const struct iwl_power_vec_entry apm_range_2[IWL_POWER_NUM] = {
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 4, 6, 0xFF), 0}, 0},
	{{ASLP, 0, 0, ASLP_TOUT(50), ASLP_TOUT(50),
	SLP_VEC(1, 2, 6, 8, 0xFF), ASLP_TOUT(2)}, 2}
	};

	static void iwl_static_sleep_cmd(struct iwl_priv *priv,
	struct iwl_powertable_cmd *cmd,
	enum iwl_power_level lvl, int period)
	{
	const struct iwl_power_vec_entry *table;
	int max_sleep[IWL_POWER_VEC_SIZE] = { 0 };
	int i;
	u8 skip;
	u32 slp_itrvl;

	if (priv->lib->adv_pm) {
	table = apm_range_2;
	if (period <= IWL_DTIM_RANGE_1_MAX)
	table = apm_range_1;
	if (period <= IWL_DTIM_RANGE_0_MAX)
	table = apm_range_0;
	} else {
	table = range_2;
	if (period <= IWL_DTIM_RANGE_1_MAX)
	table = range_1;
	if (period <= IWL_DTIM_RANGE_0_MAX)
	table = range_0;
	}

	if (WARN_ON(lvl < 0 \|\| lvl >= IWL_POWER_NUM))
	memset(cmd, 0, sizeof(*cmd));
	else
	*cmd = table[lvl].cmd;

	if (period == 0) {
	skip = 0;
	period = 1;
	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
	max_sleep[i] = 1;

	} else {
	skip = table[lvl].no_dtim;
	for (i = 0; i < IWL_POWER_VEC_SIZE; i++)
	max_sleep[i] = le32_to_cpu(cmd->sleep_interval[i]);
	max_sleep[IWL_POWER_VEC_SIZE - 1] = skip + 1;
	}

	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
	/* figure out the listen interval based on dtim period and skip */
	if (slp_itrvl == 0xFF)
	cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
	cpu_to_le32(period * (skip + 1));

	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
	if (slp_itrvl > period)
	cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
	cpu_to_le32((slp_itrvl / period) * period);

	if (skip)
	cmd->flags \|= IWL_POWER_SLEEP_OVER_DTIM_MSK;
	else
	cmd->flags &= ~IWL_POWER_SLEEP_OVER_DTIM_MSK;

	if (priv->cfg->base_params->shadow_reg_enable)
	cmd->flags \|= IWL_POWER_SHADOW_REG_ENA;
	else
	cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA;

	if (iwl_advanced_bt_coexist(priv)) {
	if (!priv->lib->bt_params->bt_sco_disable)
	cmd->flags \|= IWL_POWER_BT_SCO_ENA;
	else
	cmd->flags &= ~IWL_POWER_BT_SCO_ENA;
	}


	slp_itrvl = le32_to_cpu(cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1]);
	if (slp_itrvl > IWL_CONN_MAX_LISTEN_INTERVAL)
	cmd->sleep_interval[IWL_POWER_VEC_SIZE - 1] =
	cpu_to_le32(IWL_CONN_MAX_LISTEN_INTERVAL);

	/* enforce max sleep interval */
	for (i = IWL_POWER_VEC_SIZE - 1; i >= 0 ; i--) {
	if (le32_to_cpu(cmd->sleep_interval[i]) >
	(max_sleep[i] * period))
	cmd->sleep_interval[i] =
	cpu_to_le32(max_sleep[i] * period);
	if (i != (IWL_POWER_VEC_SIZE - 1)) {
	if (le32_to_cpu(cmd->sleep_interval[i]) >
	le32_to_cpu(cmd->sleep_interval[i+1]))
	cmd->sleep_interval[i] =
	cmd->sleep_interval[i+1];
	}
	}

	if (priv->power_data.bus_pm)
	cmd->flags \|= IWL_POWER_PCI_PM_MSK;
	else
	cmd->flags &= ~IWL_POWER_PCI_PM_MSK;

	IWL_DEBUG_POWER(priv, "numSkipDtim = %u, dtimPeriod = %d\n",
	skip, period);
	/* The power level here is 0-4 (used as array index), but user expects
	to see 1-5 (according to spec). */
	IWL_DEBUG_POWER(priv, "Sleep command for index %d\n", lvl + 1);
	}

	static void iwl_power_sleep_cam_cmd(struct iwl_priv *priv,
	struct iwl_powertable_cmd *cmd)
	{
	memset(cmd, 0, sizeof(*cmd));

	if (priv->power_data.bus_pm)
	cmd->flags \|= IWL_POWER_PCI_PM_MSK;

	IWL_DEBUG_POWER(priv, "Sleep command for CAM\n");
	}

	static int iwl_set_power(struct iwl_priv priv, struct iwl_powertable_cmd cmd)
	{
	IWL_DEBUG_POWER(priv, "Sending power/sleep command\n");
	IWL_DEBUG_POWER(priv, "Flags value = 0x%08X\n", cmd->flags);
	IWL_DEBUG_POWER(priv, "Tx timeout = %u\n", le32_to_cpu(cmd->tx_data_timeout));
	IWL_DEBUG_POWER(priv, "Rx timeout = %u\n", le32_to_cpu(cmd->rx_data_timeout));
	IWL_DEBUG_POWER(priv, "Sleep interval vector = { %d , %d , %d , %d , %d }\n",
	le32_to_cpu(cmd->sleep_interval[0]),
	le32_to_cpu(cmd->sleep_interval[1]),
	le32_to_cpu(cmd->sleep_interval[2]),
	le32_to_cpu(cmd->sleep_interval[3]),
	le32_to_cpu(cmd->sleep_interval[4]));

	return iwl_dvm_send_cmd_pdu(priv, POWER_TABLE_CMD, 0,
	sizeof(struct iwl_powertable_cmd), cmd);
	}

	static void iwl_power_build_cmd(struct iwl_priv *priv,
	struct iwl_powertable_cmd *cmd)
	{
	bool enabled = priv->hw->conf.flags & IEEE80211_CONF_PS;
	int dtimper;

	if (force_cam) {
	iwl_power_sleep_cam_cmd(priv, cmd);
	return;
	}

	dtimper = priv->hw->conf.ps_dtim_period ?: 1;

	if (priv->wowlan)
	iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper);
	else if (!priv->lib->no_idle_support &&
	priv->hw->conf.flags & IEEE80211_CONF_IDLE)
	iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20);
	else if (iwl_tt_is_low_power_state(priv)) {
	/* in thermal throttling low power state */
	iwl_static_sleep_cmd(priv, cmd,
	iwl_tt_current_power_mode(priv), dtimper);
	} else if (!enabled)
	iwl_power_sleep_cam_cmd(priv, cmd);
	else if (priv->power_data.debug_sleep_level_override >= 0)
	iwl_static_sleep_cmd(priv, cmd,
	priv->power_data.debug_sleep_level_override,
	dtimper);
	else {
	/* Note that the user parameter is 1-5 (according to spec),
	but we pass 0-4 because it acts as an array index. */
	if (iwlwifi_mod_params.power_level > IWL_POWER_INDEX_1 &&
	iwlwifi_mod_params.power_level <= IWL_POWER_NUM)
	iwl_static_sleep_cmd(priv, cmd,
	iwlwifi_mod_params.power_level - 1, dtimper);
	else
	iwl_static_sleep_cmd(priv, cmd,
	IWL_POWER_INDEX_1, dtimper);
	}
	}

	int iwl_power_set_mode(struct iwl_priv priv, struct iwl_powertable_cmd cmd,
	bool force)
	{
	int ret;
	bool update_chains;

	lockdep_assert_held(&priv->mutex);

	/* Don't update the RX chain when chain noise calibration is running */
	update_chains = priv->chain_noise_data.state == IWL_CHAIN_NOISE_DONE \|\|
	priv->chain_noise_data.state == IWL_CHAIN_NOISE_ALIVE;

	if (!memcmp(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd)) && !force)
	return 0;

	if (!iwl_is_ready_rf(priv))
	return -EIO;

	/* scan complete use sleep_power_next, need to be updated */
	memcpy(&priv->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
	if (test_bit(STATUS_SCANNING, &priv->status) && !force) {
	IWL_DEBUG_INFO(priv, "Defer power set mode while scanning\n");
	return 0;
	}

	if (cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK)
	iwl_dvm_set_pmi(priv, true);

	ret = iwl_set_power(priv, cmd);
	if (!ret) {
	if (!(cmd->flags & IWL_POWER_DRIVER_ALLOW_SLEEP_MSK))
	iwl_dvm_set_pmi(priv, false);

	if (update_chains)
	iwl_update_chain_flags(priv);
	else
	IWL_DEBUG_POWER(priv,
	"Cannot update the power, chain noise "
	"calibration running: %d\n",
	priv->chain_noise_data.state);

	memcpy(&priv->power_data.sleep_cmd, cmd, sizeof(*cmd));
	} else
	IWL_ERR(priv, "set power fail, ret = %d\n", ret);

	return ret;
	}

	int iwl_power_update_mode(struct iwl_priv *priv, bool force)
	{
	struct iwl_powertable_cmd cmd;

	iwl_power_build_cmd(priv, &cmd);
	return iwl_power_set_mode(priv, &cmd, force);
	}

	/* initialize to default */
	void iwl_power_initialize(struct iwl_priv *priv)
	{
	priv->power_data.bus_pm = priv->trans->pm_support;

	priv->power_data.debug_sleep_level_override = -1;

	memset(&priv->power_data.sleep_cmd, 0,
	sizeof(priv->power_data.sleep_cmd));
	}