| /* |
| * Copyright (c) 2010-2011 Atheros Communications Inc. |
| * |
| * Permission to use, copy, modify, and/or distribute this software for any |
| * purpose with or without fee is hereby granted, provided that the above |
| * copyright notice and this permission notice appear in all copies. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES |
| * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR |
| * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES |
| * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN |
| * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF |
| * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. |
| */ |
| |
| #include <asm/unaligned.h> |
| #include "hw.h" |
| #include "ar9003_phy.h" |
| #include "ar9003_eeprom.h" |
| |
| #define COMP_HDR_LEN 4 |
| #define COMP_CKSUM_LEN 2 |
| |
| #define LE16(x) __constant_cpu_to_le16(x) |
| #define LE32(x) __constant_cpu_to_le32(x) |
| |
| /* Local defines to distinguish between extension and control CTL's */ |
| #define EXT_ADDITIVE (0x8000) |
| #define CTL_11A_EXT (CTL_11A | EXT_ADDITIVE) |
| #define CTL_11G_EXT (CTL_11G | EXT_ADDITIVE) |
| #define CTL_11B_EXT (CTL_11B | EXT_ADDITIVE) |
| #define REDUCE_SCALED_POWER_BY_TWO_CHAIN 6 /* 10*log10(2)*2 */ |
| #define REDUCE_SCALED_POWER_BY_THREE_CHAIN 9 /* 10*log10(3)*2 */ |
| #define PWRINCR_3_TO_1_CHAIN 9 /* 10*log(3)*2 */ |
| #define PWRINCR_3_TO_2_CHAIN 3 /* floor(10*log(3/2)*2) */ |
| #define PWRINCR_2_TO_1_CHAIN 6 /* 10*log(2)*2 */ |
| |
| #define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */ |
| #define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */ |
| |
| #define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6)) |
| |
| #define EEPROM_DATA_LEN_9485 1088 |
| |
| static int ar9003_hw_power_interpolate(int32_t x, |
| int32_t *px, int32_t *py, u_int16_t np); |
| |
| |
| static const struct ar9300_eeprom ar9300_default = { |
| .eepromVersion = 2, |
| .templateVersion = 2, |
| .macAddr = {0, 2, 3, 4, 5, 6}, |
| .custData = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .baseEepHeader = { |
| .regDmn = { LE16(0), LE16(0x1f) }, |
| .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ |
| .opCapFlags = { |
| .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, |
| .eepMisc = 0, |
| }, |
| .rfSilent = 0, |
| .blueToothOptions = 0, |
| .deviceCap = 0, |
| .deviceType = 5, /* takes lower byte in eeprom location */ |
| .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, |
| .params_for_tuning_caps = {0, 0}, |
| .featureEnable = 0x0c, |
| /* |
| * bit0 - enable tx temp comp - disabled |
| * bit1 - enable tx volt comp - disabled |
| * bit2 - enable fastClock - enabled |
| * bit3 - enable doubling - enabled |
| * bit4 - enable internal regulator - disabled |
| * bit5 - enable pa predistortion - disabled |
| */ |
| .miscConfiguration = 0, /* bit0 - turn down drivestrength */ |
| .eepromWriteEnableGpio = 3, |
| .wlanDisableGpio = 0, |
| .wlanLedGpio = 8, |
| .rxBandSelectGpio = 0xff, |
| .txrxgain = 0, |
| .swreg = 0, |
| }, |
| .modalHeader2G = { |
| /* ar9300_modal_eep_header 2g */ |
| /* 4 idle,t1,t2,b(4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| .antCtrlCommon2 = LE32(0x22222), |
| |
| /* |
| * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r, |
| * rx1, rx12, b (2 bits each) |
| */ |
| .antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) }, |
| |
| /* |
| * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db |
| * for ar9280 (0xa20c/b20c 5:0) |
| */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for ar9280 (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 36, |
| .voltSlope = 0, |
| |
| /* |
| * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur |
| * channels in usual fbin coding format |
| */ |
| .spurChans = {0, 0, 0, 0, 0}, |
| |
| /* |
| * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check |
| * if the register is per chain |
| */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2c, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0cf0e0e0), |
| .papdRateMaskHt40 = LE32(0x6cf0e0e0), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext1 = { |
| .ant_div_control = 0, |
| .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
| }, |
| .calFreqPier2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| /* ar9300_cal_data_per_freq_op_loop 2g */ |
| .calPierData2G = { |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| }, |
| .calTarget_freqbin_Cck = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2484, 1), |
| }, |
| .calTarget_freqbin_2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT20 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT40 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTargetPowerCck = { |
| /* 1L-5L,5S,11L,11S */ |
| { {36, 36, 36, 36} }, |
| { {36, 36, 36, 36} }, |
| }, |
| .calTargetPower2G = { |
| /* 6-24,36,48,54 */ |
| { {32, 32, 28, 24} }, |
| { {32, 32, 28, 24} }, |
| { {32, 32, 28, 24} }, |
| }, |
| .calTargetPower2GHT20 = { |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| }, |
| .calTargetPower2GHT40 = { |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| { {32, 32, 32, 32, 28, 20, 32, 32, 28, 20, 32, 32, 28, 20} }, |
| }, |
| .ctlIndex_2G = { |
| 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, |
| 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, |
| }, |
| .ctl_freqbin_2G = { |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2457, 1), |
| FREQ2FBIN(2462, 1) |
| }, |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| { |
| FREQ2FBIN(2422, 1), |
| FREQ2FBIN(2427, 1), |
| FREQ2FBIN(2447, 1), |
| FREQ2FBIN(2452, 1) |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1), |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| }, |
| |
| { |
| /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| } |
| }, |
| .ctlPowerData_2G = { |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, |
| |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| }, |
| .modalHeader5G = { |
| /* 4 idle,t1,t2,b (4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ |
| .antCtrlCommon2 = LE32(0x22222), |
| /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ |
| .antCtrlChain = { |
| LE16(0x000), LE16(0x000), LE16(0x000), |
| }, |
| /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for merlin (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 68, |
| .voltSlope = 0, |
| /* spurChans spur channels in usual fbin coding format */ |
| .spurChans = {0, 0, 0, 0, 0}, |
| /* noiseFloorThreshCh Check if the register is per chain */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2d, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0c80c080), |
| .papdRateMaskHt40 = LE32(0x0080c080), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext2 = { |
| .tempSlopeLow = 0, |
| .tempSlopeHigh = 0, |
| .xatten1DBLow = {0, 0, 0}, |
| .xatten1MarginLow = {0, 0, 0}, |
| .xatten1DBHigh = {0, 0, 0}, |
| .xatten1MarginHigh = {0, 0, 0} |
| }, |
| .calFreqPier5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calPierData5G = { |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| |
| }, |
| .calTarget_freqbin_5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT20 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT40 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTargetPower5G = { |
| /* 6-24,36,48,54 */ |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| { {20, 20, 20, 10} }, |
| }, |
| .calTargetPower5GHT20 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| }, |
| .calTargetPower5GHT40 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| { {20, 20, 10, 10, 0, 0, 10, 10, 0, 0, 10, 10, 0, 0} }, |
| }, |
| .ctlIndex_5G = { |
| 0x10, 0x16, 0x18, 0x40, 0x46, |
| 0x48, 0x30, 0x36, 0x38 |
| }, |
| .ctl_freqbin_5G = { |
| { |
| /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| { |
| /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0), |
| /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0) |
| }, |
| |
| { |
| /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[3].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[3].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[4].ctlEdges[4].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[5].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0), |
| /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[5].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[5].ctlEdges[7].bChannel */ 0xFF |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0), |
| /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0) |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0), |
| /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0), |
| /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0) |
| } |
| }, |
| .ctlPowerData_5G = { |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| } |
| }, |
| } |
| }; |
| |
| static const struct ar9300_eeprom ar9300_x113 = { |
| .eepromVersion = 2, |
| .templateVersion = 6, |
| .macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0}, |
| .custData = {"x113-023-f0000"}, |
| .baseEepHeader = { |
| .regDmn = { LE16(0), LE16(0x1f) }, |
| .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ |
| .opCapFlags = { |
| .opFlags = AR5416_OPFLAGS_11A, |
| .eepMisc = 0, |
| }, |
| .rfSilent = 0, |
| .blueToothOptions = 0, |
| .deviceCap = 0, |
| .deviceType = 5, /* takes lower byte in eeprom location */ |
| .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, |
| .params_for_tuning_caps = {0, 0}, |
| .featureEnable = 0x0d, |
| /* |
| * bit0 - enable tx temp comp - disabled |
| * bit1 - enable tx volt comp - disabled |
| * bit2 - enable fastClock - enabled |
| * bit3 - enable doubling - enabled |
| * bit4 - enable internal regulator - disabled |
| * bit5 - enable pa predistortion - disabled |
| */ |
| .miscConfiguration = 0, /* bit0 - turn down drivestrength */ |
| .eepromWriteEnableGpio = 6, |
| .wlanDisableGpio = 0, |
| .wlanLedGpio = 8, |
| .rxBandSelectGpio = 0xff, |
| .txrxgain = 0x21, |
| .swreg = 0, |
| }, |
| .modalHeader2G = { |
| /* ar9300_modal_eep_header 2g */ |
| /* 4 idle,t1,t2,b(4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| .antCtrlCommon2 = LE32(0x44444), |
| |
| /* |
| * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r, |
| * rx1, rx12, b (2 bits each) |
| */ |
| .antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) }, |
| |
| /* |
| * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db |
| * for ar9280 (0xa20c/b20c 5:0) |
| */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for ar9280 (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 25, |
| .voltSlope = 0, |
| |
| /* |
| * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur |
| * channels in usual fbin coding format |
| */ |
| .spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0}, |
| |
| /* |
| * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check |
| * if the register is per chain |
| */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2c, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0c80c080), |
| .papdRateMaskHt40 = LE32(0x0080c080), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext1 = { |
| .ant_div_control = 0, |
| .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
| }, |
| .calFreqPier2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| /* ar9300_cal_data_per_freq_op_loop 2g */ |
| .calPierData2G = { |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| }, |
| .calTarget_freqbin_Cck = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| .calTarget_freqbin_2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT20 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT40 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTargetPowerCck = { |
| /* 1L-5L,5S,11L,11S */ |
| { {34, 34, 34, 34} }, |
| { {34, 34, 34, 34} }, |
| }, |
| .calTargetPower2G = { |
| /* 6-24,36,48,54 */ |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| }, |
| .calTargetPower2GHT20 = { |
| { {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| { {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| { {32, 32, 32, 32, 32, 28, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| }, |
| .calTargetPower2GHT40 = { |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| }, |
| .ctlIndex_2G = { |
| 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, |
| 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, |
| }, |
| .ctl_freqbin_2G = { |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2457, 1), |
| FREQ2FBIN(2462, 1) |
| }, |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| { |
| FREQ2FBIN(2422, 1), |
| FREQ2FBIN(2427, 1), |
| FREQ2FBIN(2447, 1), |
| FREQ2FBIN(2452, 1) |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1), |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| }, |
| |
| { |
| /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| } |
| }, |
| .ctlPowerData_2G = { |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, |
| |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| }, |
| .modalHeader5G = { |
| /* 4 idle,t1,t2,b (4 bits per setting) */ |
| .antCtrlCommon = LE32(0x220), |
| /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ |
| .antCtrlCommon2 = LE32(0x11111), |
| /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ |
| .antCtrlChain = { |
| LE16(0x150), LE16(0x150), LE16(0x150), |
| }, |
| /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for merlin (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 68, |
| .voltSlope = 0, |
| /* spurChans spur channels in usual fbin coding format */ |
| .spurChans = {FREQ2FBIN(5500, 0), 0, 0, 0, 0}, |
| /* noiseFloorThreshCh Check if the register is per chain */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0xf, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2d, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0cf0e0e0), |
| .papdRateMaskHt40 = LE32(0x6cf0e0e0), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext2 = { |
| .tempSlopeLow = 72, |
| .tempSlopeHigh = 105, |
| .xatten1DBLow = {0, 0, 0}, |
| .xatten1MarginLow = {0, 0, 0}, |
| .xatten1DBHigh = {0, 0, 0}, |
| .xatten1MarginHigh = {0, 0, 0} |
| }, |
| .calFreqPier5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5785, 0) |
| }, |
| .calPierData5G = { |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| |
| }, |
| .calTarget_freqbin_5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5785, 0) |
| }, |
| .calTarget_freqbin_5GHT20 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT40 = { |
| FREQ2FBIN(5190, 0), |
| FREQ2FBIN(5230, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5410, 0), |
| FREQ2FBIN(5510, 0), |
| FREQ2FBIN(5670, 0), |
| FREQ2FBIN(5755, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTargetPower5G = { |
| /* 6-24,36,48,54 */ |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| { {42, 40, 40, 34} }, |
| }, |
| .calTargetPower5GHT20 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {40, 40, 40, 40, 32, 28, 40, 40, 32, 28, 40, 40, 32, 20} }, |
| { {38, 38, 38, 38, 32, 28, 38, 38, 32, 28, 38, 38, 32, 26} }, |
| { {36, 36, 36, 36, 32, 28, 36, 36, 32, 28, 36, 36, 32, 26} }, |
| }, |
| .calTargetPower5GHT40 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {40, 40, 40, 38, 30, 26, 40, 40, 30, 26, 40, 40, 30, 24} }, |
| { {36, 36, 36, 36, 30, 26, 36, 36, 30, 26, 36, 36, 30, 24} }, |
| { {34, 34, 34, 34, 30, 26, 34, 34, 30, 26, 34, 34, 30, 24} }, |
| }, |
| .ctlIndex_5G = { |
| 0x10, 0x16, 0x18, 0x40, 0x46, |
| 0x48, 0x30, 0x36, 0x38 |
| }, |
| .ctl_freqbin_5G = { |
| { |
| /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| { |
| /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0), |
| /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0) |
| }, |
| |
| { |
| /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[3].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[3].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[4].ctlEdges[4].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[5].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0), |
| /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[5].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[5].ctlEdges[7].bChannel */ 0xFF |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0), |
| /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0) |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0), |
| /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0), |
| /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0) |
| } |
| }, |
| .ctlPowerData_5G = { |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| } |
| }, |
| } |
| }; |
| |
| |
| static const struct ar9300_eeprom ar9300_h112 = { |
| .eepromVersion = 2, |
| .templateVersion = 3, |
| .macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0}, |
| .custData = {"h112-241-f0000"}, |
| .baseEepHeader = { |
| .regDmn = { LE16(0), LE16(0x1f) }, |
| .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ |
| .opCapFlags = { |
| .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, |
| .eepMisc = 0, |
| }, |
| .rfSilent = 0, |
| .blueToothOptions = 0, |
| .deviceCap = 0, |
| .deviceType = 5, /* takes lower byte in eeprom location */ |
| .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, |
| .params_for_tuning_caps = {0, 0}, |
| .featureEnable = 0x0d, |
| /* |
| * bit0 - enable tx temp comp - disabled |
| * bit1 - enable tx volt comp - disabled |
| * bit2 - enable fastClock - enabled |
| * bit3 - enable doubling - enabled |
| * bit4 - enable internal regulator - disabled |
| * bit5 - enable pa predistortion - disabled |
| */ |
| .miscConfiguration = 0, /* bit0 - turn down drivestrength */ |
| .eepromWriteEnableGpio = 6, |
| .wlanDisableGpio = 0, |
| .wlanLedGpio = 8, |
| .rxBandSelectGpio = 0xff, |
| .txrxgain = 0x10, |
| .swreg = 0, |
| }, |
| .modalHeader2G = { |
| /* ar9300_modal_eep_header 2g */ |
| /* 4 idle,t1,t2,b(4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| .antCtrlCommon2 = LE32(0x44444), |
| |
| /* |
| * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r, |
| * rx1, rx12, b (2 bits each) |
| */ |
| .antCtrlChain = { LE16(0x150), LE16(0x150), LE16(0x150) }, |
| |
| /* |
| * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db |
| * for ar9280 (0xa20c/b20c 5:0) |
| */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for ar9280 (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 25, |
| .voltSlope = 0, |
| |
| /* |
| * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur |
| * channels in usual fbin coding format |
| */ |
| .spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0}, |
| |
| /* |
| * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check |
| * if the register is per chain |
| */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2c, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0c80c080), |
| .papdRateMaskHt40 = LE32(0x0080c080), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext1 = { |
| .ant_div_control = 0, |
| .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
| }, |
| .calFreqPier2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2462, 1), |
| }, |
| /* ar9300_cal_data_per_freq_op_loop 2g */ |
| .calPierData2G = { |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| }, |
| .calTarget_freqbin_Cck = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| .calTarget_freqbin_2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT20 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT40 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTargetPowerCck = { |
| /* 1L-5L,5S,11L,11S */ |
| { {34, 34, 34, 34} }, |
| { {34, 34, 34, 34} }, |
| }, |
| .calTargetPower2G = { |
| /* 6-24,36,48,54 */ |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| }, |
| .calTargetPower2GHT20 = { |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} }, |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} }, |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 28, 28, 28, 24} }, |
| }, |
| .calTargetPower2GHT40 = { |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 26, 26, 26, 22} }, |
| }, |
| .ctlIndex_2G = { |
| 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, |
| 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, |
| }, |
| .ctl_freqbin_2G = { |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2457, 1), |
| FREQ2FBIN(2462, 1) |
| }, |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| { |
| FREQ2FBIN(2422, 1), |
| FREQ2FBIN(2427, 1), |
| FREQ2FBIN(2447, 1), |
| FREQ2FBIN(2452, 1) |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1), |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| }, |
| |
| { |
| /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| } |
| }, |
| .ctlPowerData_2G = { |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, |
| |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| }, |
| .modalHeader5G = { |
| /* 4 idle,t1,t2,b (4 bits per setting) */ |
| .antCtrlCommon = LE32(0x220), |
| /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ |
| .antCtrlCommon2 = LE32(0x44444), |
| /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ |
| .antCtrlChain = { |
| LE16(0x150), LE16(0x150), LE16(0x150), |
| }, |
| /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ |
| .xatten1DB = {0, 0, 0}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for merlin (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0, 0, 0}, |
| .tempSlope = 45, |
| .voltSlope = 0, |
| /* spurChans spur channels in usual fbin coding format */ |
| .spurChans = {0, 0, 0, 0, 0}, |
| /* noiseFloorThreshCh Check if the register is per chain */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2d, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0cf0e0e0), |
| .papdRateMaskHt40 = LE32(0x6cf0e0e0), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext2 = { |
| .tempSlopeLow = 40, |
| .tempSlopeHigh = 50, |
| .xatten1DBLow = {0, 0, 0}, |
| .xatten1MarginLow = {0, 0, 0}, |
| .xatten1DBHigh = {0, 0, 0}, |
| .xatten1MarginHigh = {0, 0, 0} |
| }, |
| .calFreqPier5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5785, 0) |
| }, |
| .calPierData5G = { |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| |
| }, |
| .calTarget_freqbin_5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT20 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT40 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTargetPower5G = { |
| /* 6-24,36,48,54 */ |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| }, |
| .calTargetPower5GHT20 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} }, |
| { {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 20, 20, 20, 16} }, |
| { {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} }, |
| { {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 18, 18, 18, 16} }, |
| { {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} }, |
| { {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 16, 16, 16, 14} }, |
| { {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} }, |
| { {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 14, 14, 14, 12} }, |
| }, |
| .calTargetPower5GHT40 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} }, |
| { {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 18, 18, 18, 14} }, |
| { {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} }, |
| { {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 16, 16, 16, 12} }, |
| { {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} }, |
| { {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 14, 14, 14, 10} }, |
| { {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} }, |
| { {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 12, 12, 12, 8} }, |
| }, |
| .ctlIndex_5G = { |
| 0x10, 0x16, 0x18, 0x40, 0x46, |
| 0x48, 0x30, 0x36, 0x38 |
| }, |
| .ctl_freqbin_5G = { |
| { |
| /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| { |
| /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0), |
| /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0) |
| }, |
| |
| { |
| /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[3].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[3].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[4].ctlEdges[4].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[5].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0), |
| /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[5].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[5].ctlEdges[7].bChannel */ 0xFF |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0), |
| /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0) |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0), |
| /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0), |
| /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0) |
| } |
| }, |
| .ctlPowerData_5G = { |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| } |
| }, |
| } |
| }; |
| |
| |
| static const struct ar9300_eeprom ar9300_x112 = { |
| .eepromVersion = 2, |
| .templateVersion = 5, |
| .macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0}, |
| .custData = {"x112-041-f0000"}, |
| .baseEepHeader = { |
| .regDmn = { LE16(0), LE16(0x1f) }, |
| .txrxMask = 0x77, /* 4 bits tx and 4 bits rx */ |
| .opCapFlags = { |
| .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, |
| .eepMisc = 0, |
| }, |
| .rfSilent = 0, |
| .blueToothOptions = 0, |
| .deviceCap = 0, |
| .deviceType = 5, /* takes lower byte in eeprom location */ |
| .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, |
| .params_for_tuning_caps = {0, 0}, |
| .featureEnable = 0x0d, |
| /* |
| * bit0 - enable tx temp comp - disabled |
| * bit1 - enable tx volt comp - disabled |
| * bit2 - enable fastclock - enabled |
| * bit3 - enable doubling - enabled |
| * bit4 - enable internal regulator - disabled |
| * bit5 - enable pa predistortion - disabled |
| */ |
| .miscConfiguration = 0, /* bit0 - turn down drivestrength */ |
| .eepromWriteEnableGpio = 6, |
| .wlanDisableGpio = 0, |
| .wlanLedGpio = 8, |
| .rxBandSelectGpio = 0xff, |
| .txrxgain = 0x0, |
| .swreg = 0, |
| }, |
| .modalHeader2G = { |
| /* ar9300_modal_eep_header 2g */ |
| /* 4 idle,t1,t2,b(4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| .antCtrlCommon2 = LE32(0x22222), |
| |
| /* |
| * antCtrlChain[ar9300_max_chains]; 6 idle, t, r, |
| * rx1, rx12, b (2 bits each) |
| */ |
| .antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) }, |
| |
| /* |
| * xatten1DB[AR9300_max_chains]; 3 xatten1_db |
| * for ar9280 (0xa20c/b20c 5:0) |
| */ |
| .xatten1DB = {0x1b, 0x1b, 0x1b}, |
| |
| /* |
| * xatten1Margin[ar9300_max_chains]; 3 xatten1_margin |
| * for ar9280 (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0x15, 0x15, 0x15}, |
| .tempSlope = 50, |
| .voltSlope = 0, |
| |
| /* |
| * spurChans[OSPrey_eeprom_modal_sPURS]; spur |
| * channels in usual fbin coding format |
| */ |
| .spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0}, |
| |
| /* |
| * noiseFloorThreshch[ar9300_max_cHAINS]; 3 Check |
| * if the register is per chain |
| */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2c, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0c80c080), |
| .papdRateMaskHt40 = LE32(0x0080c080), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext1 = { |
| .ant_div_control = 0, |
| .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
| }, |
| .calFreqPier2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| /* ar9300_cal_data_per_freq_op_loop 2g */ |
| .calPierData2G = { |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| }, |
| .calTarget_freqbin_Cck = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| .calTarget_freqbin_2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT20 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT40 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTargetPowerCck = { |
| /* 1L-5L,5S,11L,11s */ |
| { {38, 38, 38, 38} }, |
| { {38, 38, 38, 38} }, |
| }, |
| .calTargetPower2G = { |
| /* 6-24,36,48,54 */ |
| { {38, 38, 36, 34} }, |
| { {38, 38, 36, 34} }, |
| { {38, 38, 34, 32} }, |
| }, |
| .calTargetPower2GHT20 = { |
| { {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} }, |
| { {36, 36, 36, 36, 36, 34, 36, 34, 32, 30, 30, 30, 28, 26} }, |
| { {36, 36, 36, 36, 36, 34, 34, 32, 30, 28, 28, 28, 28, 26} }, |
| }, |
| .calTargetPower2GHT40 = { |
| { {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} }, |
| { {36, 36, 36, 36, 34, 32, 34, 32, 30, 28, 28, 28, 28, 24} }, |
| { {36, 36, 36, 36, 34, 32, 32, 30, 28, 26, 26, 26, 26, 24} }, |
| }, |
| .ctlIndex_2G = { |
| 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, |
| 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, |
| }, |
| .ctl_freqbin_2G = { |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2457, 1), |
| FREQ2FBIN(2462, 1) |
| }, |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| { |
| FREQ2FBIN(2422, 1), |
| FREQ2FBIN(2427, 1), |
| FREQ2FBIN(2447, 1), |
| FREQ2FBIN(2452, 1) |
| }, |
| |
| { |
| /* Data[4].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[4].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| /* Data[4].ctledges[2].bchannel */ FREQ2FBIN(2472, 1), |
| /* Data[4].ctledges[3].bchannel */ FREQ2FBIN(2484, 1), |
| }, |
| |
| { |
| /* Data[5].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[5].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| /* Data[5].ctledges[2].bchannel */ FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[6].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[6].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[7].ctledges[0].bchannel */ FREQ2FBIN(2422, 1), |
| /* Data[7].ctledges[1].bchannel */ FREQ2FBIN(2427, 1), |
| /* Data[7].ctledges[2].bchannel */ FREQ2FBIN(2447, 1), |
| /* Data[7].ctledges[3].bchannel */ FREQ2FBIN(2462, 1), |
| }, |
| |
| { |
| /* Data[8].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[8].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| /* Data[8].ctledges[2].bchannel */ FREQ2FBIN(2472, 1), |
| }, |
| |
| { |
| /* Data[9].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[9].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| /* Data[9].ctledges[2].bchannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[10].ctledges[0].bchannel */ FREQ2FBIN(2412, 1), |
| /* Data[10].ctledges[1].bchannel */ FREQ2FBIN(2417, 1), |
| /* Data[10].ctledges[2].bchannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[11].ctledges[0].bchannel */ FREQ2FBIN(2422, 1), |
| /* Data[11].ctledges[1].bchannel */ FREQ2FBIN(2427, 1), |
| /* Data[11].ctledges[2].bchannel */ FREQ2FBIN(2447, 1), |
| /* Data[11].ctledges[3].bchannel */ FREQ2FBIN(2462, 1), |
| } |
| }, |
| .ctlPowerData_2G = { |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, |
| |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| }, |
| .modalHeader5G = { |
| /* 4 idle,t1,t2,b (4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ |
| .antCtrlCommon2 = LE32(0x22222), |
| /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ |
| .antCtrlChain = { |
| LE16(0x0), LE16(0x0), LE16(0x0), |
| }, |
| /* xatten1DB 3 xatten1_db for ar9280 (0xa20c/b20c 5:0) */ |
| .xatten1DB = {0x13, 0x19, 0x17}, |
| |
| /* |
| * xatten1Margin[ar9300_max_chains]; 3 xatten1_margin |
| * for merlin (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0x19, 0x19, 0x19}, |
| .tempSlope = 70, |
| .voltSlope = 15, |
| /* spurChans spur channels in usual fbin coding format */ |
| .spurChans = {0, 0, 0, 0, 0}, |
| /* noiseFloorThreshch check if the register is per chain */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2d, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0cf0e0e0), |
| .papdRateMaskHt40 = LE32(0x6cf0e0e0), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext2 = { |
| .tempSlopeLow = 72, |
| .tempSlopeHigh = 105, |
| .xatten1DBLow = {0x10, 0x14, 0x10}, |
| .xatten1MarginLow = {0x19, 0x19 , 0x19}, |
| .xatten1DBHigh = {0x1d, 0x20, 0x24}, |
| .xatten1MarginHigh = {0x10, 0x10, 0x10} |
| }, |
| .calFreqPier5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5785, 0) |
| }, |
| .calPierData5G = { |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| |
| }, |
| .calTarget_freqbin_5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT20 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT40 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5725, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTargetPower5G = { |
| /* 6-24,36,48,54 */ |
| { {32, 32, 28, 26} }, |
| { {32, 32, 28, 26} }, |
| { {32, 32, 28, 26} }, |
| { {32, 32, 26, 24} }, |
| { {32, 32, 26, 24} }, |
| { {32, 32, 24, 22} }, |
| { {30, 30, 24, 22} }, |
| { {30, 30, 24, 22} }, |
| }, |
| .calTargetPower5GHT20 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 32, 28, 26, 32, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 22, 22, 20, 20} }, |
| { {32, 32, 32, 32, 28, 26, 32, 26, 24, 22, 20, 18, 16, 16} }, |
| { {32, 32, 32, 32, 28, 26, 32, 24, 20, 16, 18, 16, 14, 14} }, |
| { {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} }, |
| { {30, 30, 30, 30, 28, 26, 30, 24, 20, 16, 18, 16, 14, 14} }, |
| }, |
| .calTargetPower5GHT40 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 30, 28, 26, 30, 28, 26, 24, 24, 24, 22, 22} }, |
| { {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 22, 22, 20, 20} }, |
| { {32, 32, 32, 30, 28, 26, 30, 26, 24, 22, 20, 18, 16, 16} }, |
| { {32, 32, 32, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} }, |
| { {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} }, |
| { {30, 30, 30, 30, 28, 26, 30, 22, 20, 16, 18, 16, 14, 14} }, |
| }, |
| .ctlIndex_5G = { |
| 0x10, 0x16, 0x18, 0x40, 0x46, |
| 0x48, 0x30, 0x36, 0x38 |
| }, |
| .ctl_freqbin_5G = { |
| { |
| /* Data[0].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[0].ctledges[1].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[0].ctledges[2].bchannel */ FREQ2FBIN(5280, 0), |
| /* Data[0].ctledges[3].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[0].ctledges[4].bchannel */ FREQ2FBIN(5600, 0), |
| /* Data[0].ctledges[5].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[0].ctledges[6].bchannel */ FREQ2FBIN(5745, 0), |
| /* Data[0].ctledges[7].bchannel */ FREQ2FBIN(5825, 0) |
| }, |
| { |
| /* Data[1].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[1].ctledges[1].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[1].ctledges[2].bchannel */ FREQ2FBIN(5280, 0), |
| /* Data[1].ctledges[3].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[1].ctledges[4].bchannel */ FREQ2FBIN(5520, 0), |
| /* Data[1].ctledges[5].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[1].ctledges[6].bchannel */ FREQ2FBIN(5745, 0), |
| /* Data[1].ctledges[7].bchannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[2].ctledges[0].bchannel */ FREQ2FBIN(5190, 0), |
| /* Data[2].ctledges[1].bchannel */ FREQ2FBIN(5230, 0), |
| /* Data[2].ctledges[2].bchannel */ FREQ2FBIN(5270, 0), |
| /* Data[2].ctledges[3].bchannel */ FREQ2FBIN(5310, 0), |
| /* Data[2].ctledges[4].bchannel */ FREQ2FBIN(5510, 0), |
| /* Data[2].ctledges[5].bchannel */ FREQ2FBIN(5550, 0), |
| /* Data[2].ctledges[6].bchannel */ FREQ2FBIN(5670, 0), |
| /* Data[2].ctledges[7].bchannel */ FREQ2FBIN(5755, 0) |
| }, |
| |
| { |
| /* Data[3].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[3].ctledges[1].bchannel */ FREQ2FBIN(5200, 0), |
| /* Data[3].ctledges[2].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[3].ctledges[3].bchannel */ FREQ2FBIN(5320, 0), |
| /* Data[3].ctledges[4].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[3].ctledges[5].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[3].ctledges[6].bchannel */ 0xFF, |
| /* Data[3].ctledges[7].bchannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[4].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[4].ctledges[1].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[4].ctledges[2].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[4].ctledges[3].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[4].ctledges[4].bchannel */ 0xFF, |
| /* Data[4].ctledges[5].bchannel */ 0xFF, |
| /* Data[4].ctledges[6].bchannel */ 0xFF, |
| /* Data[4].ctledges[7].bchannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[5].ctledges[0].bchannel */ FREQ2FBIN(5190, 0), |
| /* Data[5].ctledges[1].bchannel */ FREQ2FBIN(5270, 0), |
| /* Data[5].ctledges[2].bchannel */ FREQ2FBIN(5310, 0), |
| /* Data[5].ctledges[3].bchannel */ FREQ2FBIN(5510, 0), |
| /* Data[5].ctledges[4].bchannel */ FREQ2FBIN(5590, 0), |
| /* Data[5].ctledges[5].bchannel */ FREQ2FBIN(5670, 0), |
| /* Data[5].ctledges[6].bchannel */ 0xFF, |
| /* Data[5].ctledges[7].bchannel */ 0xFF |
| }, |
| |
| { |
| /* Data[6].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[6].ctledges[1].bchannel */ FREQ2FBIN(5200, 0), |
| /* Data[6].ctledges[2].bchannel */ FREQ2FBIN(5220, 0), |
| /* Data[6].ctledges[3].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[6].ctledges[4].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[6].ctledges[5].bchannel */ FREQ2FBIN(5600, 0), |
| /* Data[6].ctledges[6].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[6].ctledges[7].bchannel */ FREQ2FBIN(5745, 0) |
| }, |
| |
| { |
| /* Data[7].ctledges[0].bchannel */ FREQ2FBIN(5180, 0), |
| /* Data[7].ctledges[1].bchannel */ FREQ2FBIN(5260, 0), |
| /* Data[7].ctledges[2].bchannel */ FREQ2FBIN(5320, 0), |
| /* Data[7].ctledges[3].bchannel */ FREQ2FBIN(5500, 0), |
| /* Data[7].ctledges[4].bchannel */ FREQ2FBIN(5560, 0), |
| /* Data[7].ctledges[5].bchannel */ FREQ2FBIN(5700, 0), |
| /* Data[7].ctledges[6].bchannel */ FREQ2FBIN(5745, 0), |
| /* Data[7].ctledges[7].bchannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[8].ctledges[0].bchannel */ FREQ2FBIN(5190, 0), |
| /* Data[8].ctledges[1].bchannel */ FREQ2FBIN(5230, 0), |
| /* Data[8].ctledges[2].bchannel */ FREQ2FBIN(5270, 0), |
| /* Data[8].ctledges[3].bchannel */ FREQ2FBIN(5510, 0), |
| /* Data[8].ctledges[4].bchannel */ FREQ2FBIN(5550, 0), |
| /* Data[8].ctledges[5].bchannel */ FREQ2FBIN(5670, 0), |
| /* Data[8].ctledges[6].bchannel */ FREQ2FBIN(5755, 0), |
| /* Data[8].ctledges[7].bchannel */ FREQ2FBIN(5795, 0) |
| } |
| }, |
| .ctlPowerData_5G = { |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| } |
| }, |
| } |
| }; |
| |
| static const struct ar9300_eeprom ar9300_h116 = { |
| .eepromVersion = 2, |
| .templateVersion = 4, |
| .macAddr = {0x00, 0x03, 0x7f, 0x0, 0x0, 0x0}, |
| .custData = {"h116-041-f0000"}, |
| .baseEepHeader = { |
| .regDmn = { LE16(0), LE16(0x1f) }, |
| .txrxMask = 0x33, /* 4 bits tx and 4 bits rx */ |
| .opCapFlags = { |
| .opFlags = AR5416_OPFLAGS_11G | AR5416_OPFLAGS_11A, |
| .eepMisc = 0, |
| }, |
| .rfSilent = 0, |
| .blueToothOptions = 0, |
| .deviceCap = 0, |
| .deviceType = 5, /* takes lower byte in eeprom location */ |
| .pwrTableOffset = AR9300_PWR_TABLE_OFFSET, |
| .params_for_tuning_caps = {0, 0}, |
| .featureEnable = 0x0d, |
| /* |
| * bit0 - enable tx temp comp - disabled |
| * bit1 - enable tx volt comp - disabled |
| * bit2 - enable fastClock - enabled |
| * bit3 - enable doubling - enabled |
| * bit4 - enable internal regulator - disabled |
| * bit5 - enable pa predistortion - disabled |
| */ |
| .miscConfiguration = 0, /* bit0 - turn down drivestrength */ |
| .eepromWriteEnableGpio = 6, |
| .wlanDisableGpio = 0, |
| .wlanLedGpio = 8, |
| .rxBandSelectGpio = 0xff, |
| .txrxgain = 0x10, |
| .swreg = 0, |
| }, |
| .modalHeader2G = { |
| /* ar9300_modal_eep_header 2g */ |
| /* 4 idle,t1,t2,b(4 bits per setting) */ |
| .antCtrlCommon = LE32(0x110), |
| /* 4 ra1l1, ra2l1, ra1l2, ra2l2, ra12 */ |
| .antCtrlCommon2 = LE32(0x44444), |
| |
| /* |
| * antCtrlChain[AR9300_MAX_CHAINS]; 6 idle, t, r, |
| * rx1, rx12, b (2 bits each) |
| */ |
| .antCtrlChain = { LE16(0x10), LE16(0x10), LE16(0x10) }, |
| |
| /* |
| * xatten1DB[AR9300_MAX_CHAINS]; 3 xatten1_db |
| * for ar9280 (0xa20c/b20c 5:0) |
| */ |
| .xatten1DB = {0x1f, 0x1f, 0x1f}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for ar9280 (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0x12, 0x12, 0x12}, |
| .tempSlope = 25, |
| .voltSlope = 0, |
| |
| /* |
| * spurChans[OSPREY_EEPROM_MODAL_SPURS]; spur |
| * channels in usual fbin coding format |
| */ |
| .spurChans = {FREQ2FBIN(2464, 1), 0, 0, 0, 0}, |
| |
| /* |
| * noiseFloorThreshCh[AR9300_MAX_CHAINS]; 3 Check |
| * if the register is per chain |
| */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2c, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0c80C080), |
| .papdRateMaskHt40 = LE32(0x0080C080), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext1 = { |
| .ant_div_control = 0, |
| .future = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} |
| }, |
| .calFreqPier2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2462, 1), |
| }, |
| /* ar9300_cal_data_per_freq_op_loop 2g */ |
| .calPierData2G = { |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| { {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0} }, |
| }, |
| .calTarget_freqbin_Cck = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2472, 1), |
| }, |
| .calTarget_freqbin_2G = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT20 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTarget_freqbin_2GHT40 = { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2437, 1), |
| FREQ2FBIN(2472, 1) |
| }, |
| .calTargetPowerCck = { |
| /* 1L-5L,5S,11L,11S */ |
| { {34, 34, 34, 34} }, |
| { {34, 34, 34, 34} }, |
| }, |
| .calTargetPower2G = { |
| /* 6-24,36,48,54 */ |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| { {34, 34, 32, 32} }, |
| }, |
| .calTargetPower2GHT20 = { |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| { {32, 32, 32, 32, 32, 30, 32, 32, 30, 28, 0, 0, 0, 0} }, |
| }, |
| .calTargetPower2GHT40 = { |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| { {30, 30, 30, 30, 30, 28, 30, 30, 28, 26, 0, 0, 0, 0} }, |
| }, |
| .ctlIndex_2G = { |
| 0x11, 0x12, 0x15, 0x17, 0x41, 0x42, |
| 0x45, 0x47, 0x31, 0x32, 0x35, 0x37, |
| }, |
| .ctl_freqbin_2G = { |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2457, 1), |
| FREQ2FBIN(2462, 1) |
| }, |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| |
| { |
| FREQ2FBIN(2412, 1), |
| FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2462, 1), |
| 0xFF, |
| }, |
| { |
| FREQ2FBIN(2422, 1), |
| FREQ2FBIN(2427, 1), |
| FREQ2FBIN(2447, 1), |
| FREQ2FBIN(2452, 1) |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(2484, 1), |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| FREQ2FBIN(2472, 1), |
| 0, |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| }, |
| |
| { |
| /* Data[9].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[9].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[9].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[10].ctlEdges[0].bChannel */ FREQ2FBIN(2412, 1), |
| /* Data[10].ctlEdges[1].bChannel */ FREQ2FBIN(2417, 1), |
| /* Data[10].ctlEdges[2].bChannel */ FREQ2FBIN(2472, 1), |
| 0 |
| }, |
| |
| { |
| /* Data[11].ctlEdges[0].bChannel */ FREQ2FBIN(2422, 1), |
| /* Data[11].ctlEdges[1].bChannel */ FREQ2FBIN(2427, 1), |
| /* Data[11].ctlEdges[2].bChannel */ FREQ2FBIN(2447, 1), |
| /* Data[11].ctlEdges[3].bChannel */ FREQ2FBIN(2462, 1), |
| } |
| }, |
| .ctlPowerData_2G = { |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } }, |
| |
| { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } }, |
| }, |
| .modalHeader5G = { |
| /* 4 idle,t1,t2,b (4 bits per setting) */ |
| .antCtrlCommon = LE32(0x220), |
| /* 4 ra1l1, ra2l1, ra1l2,ra2l2,ra12 */ |
| .antCtrlCommon2 = LE32(0x44444), |
| /* antCtrlChain 6 idle, t,r,rx1,rx12,b (2 bits each) */ |
| .antCtrlChain = { |
| LE16(0x150), LE16(0x150), LE16(0x150), |
| }, |
| /* xatten1DB 3 xatten1_db for AR9280 (0xa20c/b20c 5:0) */ |
| .xatten1DB = {0x19, 0x19, 0x19}, |
| |
| /* |
| * xatten1Margin[AR9300_MAX_CHAINS]; 3 xatten1_margin |
| * for merlin (0xa20c/b20c 16:12 |
| */ |
| .xatten1Margin = {0x14, 0x14, 0x14}, |
| .tempSlope = 70, |
| .voltSlope = 0, |
| /* spurChans spur channels in usual fbin coding format */ |
| .spurChans = {0, 0, 0, 0, 0}, |
| /* noiseFloorThreshCh Check if the register is per chain */ |
| .noiseFloorThreshCh = {-1, 0, 0}, |
| .reserved = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, |
| .quick_drop = 0, |
| .xpaBiasLvl = 0, |
| .txFrameToDataStart = 0x0e, |
| .txFrameToPaOn = 0x0e, |
| .txClip = 3, /* 4 bits tx_clip, 4 bits dac_scale_cck */ |
| .antennaGain = 0, |
| .switchSettling = 0x2d, |
| .adcDesiredSize = -30, |
| .txEndToXpaOff = 0, |
| .txEndToRxOn = 0x2, |
| .txFrameToXpaOn = 0xe, |
| .thresh62 = 28, |
| .papdRateMaskHt20 = LE32(0x0cf0e0e0), |
| .papdRateMaskHt40 = LE32(0x6cf0e0e0), |
| .futureModal = { |
| 0, 0, 0, 0, 0, 0, 0, 0, |
| }, |
| }, |
| .base_ext2 = { |
| .tempSlopeLow = 35, |
| .tempSlopeHigh = 50, |
| .xatten1DBLow = {0, 0, 0}, |
| .xatten1MarginLow = {0, 0, 0}, |
| .xatten1DBHigh = {0, 0, 0}, |
| .xatten1MarginHigh = {0, 0, 0} |
| }, |
| .calFreqPier5G = { |
| FREQ2FBIN(5160, 0), |
| FREQ2FBIN(5220, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5785, 0) |
| }, |
| .calPierData5G = { |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| { |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| {0, 0, 0, 0, 0}, |
| }, |
| |
| }, |
| .calTarget_freqbin_5G = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5600, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT20 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTarget_freqbin_5GHT40 = { |
| FREQ2FBIN(5180, 0), |
| FREQ2FBIN(5240, 0), |
| FREQ2FBIN(5320, 0), |
| FREQ2FBIN(5400, 0), |
| FREQ2FBIN(5500, 0), |
| FREQ2FBIN(5700, 0), |
| FREQ2FBIN(5745, 0), |
| FREQ2FBIN(5825, 0) |
| }, |
| .calTargetPower5G = { |
| /* 6-24,36,48,54 */ |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| { {30, 30, 28, 24} }, |
| }, |
| .calTargetPower5GHT20 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} }, |
| { {30, 30, 30, 28, 24, 20, 30, 28, 24, 20, 0, 0, 0, 0} }, |
| { {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} }, |
| { {30, 30, 30, 26, 22, 18, 30, 26, 22, 18, 0, 0, 0, 0} }, |
| { {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} }, |
| { {30, 30, 30, 24, 20, 16, 30, 24, 20, 16, 0, 0, 0, 0} }, |
| { {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} }, |
| { {30, 30, 30, 22, 18, 14, 30, 22, 18, 14, 0, 0, 0, 0} }, |
| }, |
| .calTargetPower5GHT40 = { |
| /* |
| * 0_8_16,1-3_9-11_17-19, |
| * 4,5,6,7,12,13,14,15,20,21,22,23 |
| */ |
| { {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} }, |
| { {28, 28, 28, 26, 22, 18, 28, 26, 22, 18, 0, 0, 0, 0} }, |
| { {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} }, |
| { {28, 28, 28, 24, 20, 16, 28, 24, 20, 16, 0, 0, 0, 0} }, |
| { {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} }, |
| { {28, 28, 28, 22, 18, 14, 28, 22, 18, 14, 0, 0, 0, 0} }, |
| { {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} }, |
| { {28, 28, 28, 20, 16, 12, 28, 20, 16, 12, 0, 0, 0, 0} }, |
| }, |
| .ctlIndex_5G = { |
| 0x10, 0x16, 0x18, 0x40, 0x46, |
| 0x48, 0x30, 0x36, 0x38 |
| }, |
| .ctl_freqbin_5G = { |
| { |
| /* Data[0].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[0].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[0].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[0].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[0].ctlEdges[4].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[0].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[0].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[0].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| { |
| /* Data[1].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[1].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[1].ctlEdges[2].bChannel */ FREQ2FBIN(5280, 0), |
| /* Data[1].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[1].ctlEdges[4].bChannel */ FREQ2FBIN(5520, 0), |
| /* Data[1].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[1].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[1].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[2].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[2].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[2].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[2].ctlEdges[3].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[2].ctlEdges[4].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[2].ctlEdges[5].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[2].ctlEdges[6].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[2].ctlEdges[7].bChannel */ FREQ2FBIN(5755, 0) |
| }, |
| |
| { |
| /* Data[3].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[3].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[3].ctlEdges[2].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[3].ctlEdges[3].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[3].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[3].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[3].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[3].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[4].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[4].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[4].ctlEdges[2].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[4].ctlEdges[3].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[4].ctlEdges[4].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[5].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[4].ctlEdges[7].bChannel */ 0xFF, |
| }, |
| |
| { |
| /* Data[5].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[5].ctlEdges[1].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[5].ctlEdges[2].bChannel */ FREQ2FBIN(5310, 0), |
| /* Data[5].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[5].ctlEdges[4].bChannel */ FREQ2FBIN(5590, 0), |
| /* Data[5].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[5].ctlEdges[6].bChannel */ 0xFF, |
| /* Data[5].ctlEdges[7].bChannel */ 0xFF |
| }, |
| |
| { |
| /* Data[6].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[6].ctlEdges[1].bChannel */ FREQ2FBIN(5200, 0), |
| /* Data[6].ctlEdges[2].bChannel */ FREQ2FBIN(5220, 0), |
| /* Data[6].ctlEdges[3].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[6].ctlEdges[4].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[6].ctlEdges[5].bChannel */ FREQ2FBIN(5600, 0), |
| /* Data[6].ctlEdges[6].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[6].ctlEdges[7].bChannel */ FREQ2FBIN(5745, 0) |
| }, |
| |
| { |
| /* Data[7].ctlEdges[0].bChannel */ FREQ2FBIN(5180, 0), |
| /* Data[7].ctlEdges[1].bChannel */ FREQ2FBIN(5260, 0), |
| /* Data[7].ctlEdges[2].bChannel */ FREQ2FBIN(5320, 0), |
| /* Data[7].ctlEdges[3].bChannel */ FREQ2FBIN(5500, 0), |
| /* Data[7].ctlEdges[4].bChannel */ FREQ2FBIN(5560, 0), |
| /* Data[7].ctlEdges[5].bChannel */ FREQ2FBIN(5700, 0), |
| /* Data[7].ctlEdges[6].bChannel */ FREQ2FBIN(5745, 0), |
| /* Data[7].ctlEdges[7].bChannel */ FREQ2FBIN(5825, 0) |
| }, |
| |
| { |
| /* Data[8].ctlEdges[0].bChannel */ FREQ2FBIN(5190, 0), |
| /* Data[8].ctlEdges[1].bChannel */ FREQ2FBIN(5230, 0), |
| /* Data[8].ctlEdges[2].bChannel */ FREQ2FBIN(5270, 0), |
| /* Data[8].ctlEdges[3].bChannel */ FREQ2FBIN(5510, 0), |
| /* Data[8].ctlEdges[4].bChannel */ FREQ2FBIN(5550, 0), |
| /* Data[8].ctlEdges[5].bChannel */ FREQ2FBIN(5670, 0), |
| /* Data[8].ctlEdges[6].bChannel */ FREQ2FBIN(5755, 0), |
| /* Data[8].ctlEdges[7].bChannel */ FREQ2FBIN(5795, 0) |
| } |
| }, |
| .ctlPowerData_5G = { |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0), |
| } |
| }, |
| { |
| { |
| CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1), |
| CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1), |
| } |
| }, |
| } |
| }; |
| |
| |
| static const struct ar9300_eeprom *ar9300_eep_templates[] = { |
| &ar9300_default, |
| &ar9300_x112, |
| &ar9300_h116, |
| &ar9300_h112, |
| &ar9300_x113, |
| }; |
| |
| static const struct ar9300_eeprom *ar9003_eeprom_struct_find_by_id(int id) |
| { |
| #define N_LOOP (sizeof(ar9300_eep_templates) / sizeof(ar9300_eep_templates[0])) |
| int it; |
| |
| for (it = 0; it < N_LOOP; it++) |
| if (ar9300_eep_templates[it]->templateVersion == id) |
| return ar9300_eep_templates[it]; |
| return NULL; |
| #undef N_LOOP |
| } |
| |
| |
| static u16 ath9k_hw_fbin2freq(u8 fbin, bool is2GHz) |
| { |
| if (fbin == AR5416_BCHAN_UNUSED) |
| return fbin; |
| |
| return (u16) ((is2GHz) ? (2300 + fbin) : (4800 + 5 * fbin)); |
| } |
| |
| static int ath9k_hw_ar9300_check_eeprom(struct ath_hw *ah) |
| { |
| return 0; |
| } |
| |
| static int interpolate(int x, int xa, int xb, int ya, int yb) |
| { |
| int bf, factor, plus; |
| |
| bf = 2 * (yb - ya) * (x - xa) / (xb - xa); |
| factor = bf / 2; |
| plus = bf % 2; |
| return ya + factor + plus; |
| } |
| |
| static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, |
| enum eeprom_param param) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct ar9300_base_eep_hdr *pBase = &eep->baseEepHeader; |
| |
| switch (param) { |
| case EEP_MAC_LSW: |
| return get_unaligned_be16(eep->macAddr); |
| case EEP_MAC_MID: |
| return get_unaligned_be16(eep->macAddr + 2); |
| case EEP_MAC_MSW: |
| return get_unaligned_be16(eep->macAddr + 4); |
| case EEP_REG_0: |
| return le16_to_cpu(pBase->regDmn[0]); |
| case EEP_OP_CAP: |
| return pBase->deviceCap; |
| case EEP_OP_MODE: |
| return pBase->opCapFlags.opFlags; |
| case EEP_RF_SILENT: |
| return pBase->rfSilent; |
| case EEP_TX_MASK: |
| return (pBase->txrxMask >> 4) & 0xf; |
| case EEP_RX_MASK: |
| return pBase->txrxMask & 0xf; |
| case EEP_DRIVE_STRENGTH: |
| #define AR9300_EEP_BASE_DRIV_STRENGTH 0x1 |
| return pBase->miscConfiguration & AR9300_EEP_BASE_DRIV_STRENGTH; |
| case EEP_INTERNAL_REGULATOR: |
| /* Bit 4 is internal regulator flag */ |
| return (pBase->featureEnable & 0x10) >> 4; |
| case EEP_SWREG: |
| return le32_to_cpu(pBase->swreg); |
| case EEP_PAPRD: |
| return !!(pBase->featureEnable & BIT(5)); |
| case EEP_CHAIN_MASK_REDUCE: |
| return (pBase->miscConfiguration >> 0x3) & 0x1; |
| case EEP_ANT_DIV_CTL1: |
| return eep->base_ext1.ant_div_control; |
| case EEP_ANTENNA_GAIN_5G: |
| return eep->modalHeader5G.antennaGain; |
| case EEP_ANTENNA_GAIN_2G: |
| return eep->modalHeader2G.antennaGain; |
| case EEP_QUICK_DROP: |
| return pBase->miscConfiguration & BIT(1); |
| default: |
| return 0; |
| } |
| } |
| |
| static bool ar9300_eeprom_read_byte(struct ath_common *common, int address, |
| u8 *buffer) |
| { |
| u16 val; |
| |
| if (unlikely(!ath9k_hw_nvram_read(common, address / 2, &val))) |
| return false; |
| |
| *buffer = (val >> (8 * (address % 2))) & 0xff; |
| return true; |
| } |
| |
| static bool ar9300_eeprom_read_word(struct ath_common *common, int address, |
| u8 *buffer) |
| { |
| u16 val; |
| |
| if (unlikely(!ath9k_hw_nvram_read(common, address / 2, &val))) |
| return false; |
| |
| buffer[0] = val >> 8; |
| buffer[1] = val & 0xff; |
| |
| return true; |
| } |
| |
| static bool ar9300_read_eeprom(struct ath_hw *ah, int address, u8 *buffer, |
| int count) |
| { |
| struct ath_common *common = ath9k_hw_common(ah); |
| int i; |
| |
| if ((address < 0) || ((address + count) / 2 > AR9300_EEPROM_SIZE - 1)) { |
| ath_dbg(common, EEPROM, "eeprom address not in range\n"); |
| return false; |
| } |
| |
| /* |
| * Since we're reading the bytes in reverse order from a little-endian |
| * word stream, an even address means we only use the lower half of |
| * the 16-bit word at that address |
| */ |
| if (address % 2 == 0) { |
| if (!ar9300_eeprom_read_byte(common, address--, buffer++)) |
| goto error; |
| |
| count--; |
| } |
| |
| for (i = 0; i < count / 2; i++) { |
| if (!ar9300_eeprom_read_word(common, address, buffer)) |
| goto error; |
| |
| address -= 2; |
| buffer += 2; |
| } |
| |
| if (count % 2) |
| if (!ar9300_eeprom_read_byte(common, address, buffer)) |
| goto error; |
| |
| return true; |
| |
| error: |
| ath_dbg(common, EEPROM, "unable to read eeprom region at offset %d\n", |
| address); |
| return false; |
| } |
| |
| static bool ar9300_otp_read_word(struct ath_hw *ah, int addr, u32 *data) |
| { |
| REG_READ(ah, AR9300_OTP_BASE + (4 * addr)); |
| |
| if (!ath9k_hw_wait(ah, AR9300_OTP_STATUS, AR9300_OTP_STATUS_TYPE, |
| AR9300_OTP_STATUS_VALID, 1000)) |
| return false; |
| |
| *data = REG_READ(ah, AR9300_OTP_READ_DATA); |
| return true; |
| } |
| |
| static bool ar9300_read_otp(struct ath_hw *ah, int address, u8 *buffer, |
| int count) |
| { |
| u32 data; |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| int offset = 8 * ((address - i) % 4); |
| if (!ar9300_otp_read_word(ah, (address - i) / 4, &data)) |
| return false; |
| |
| buffer[i] = (data >> offset) & 0xff; |
| } |
| |
| return true; |
| } |
| |
| |
| static void ar9300_comp_hdr_unpack(u8 *best, int *code, int *reference, |
| int *length, int *major, int *minor) |
| { |
| unsigned long value[4]; |
| |
| value[0] = best[0]; |
| value[1] = best[1]; |
| value[2] = best[2]; |
| value[3] = best[3]; |
| *code = ((value[0] >> 5) & 0x0007); |
| *reference = (value[0] & 0x001f) | ((value[1] >> 2) & 0x0020); |
| *length = ((value[1] << 4) & 0x07f0) | ((value[2] >> 4) & 0x000f); |
| *major = (value[2] & 0x000f); |
| *minor = (value[3] & 0x00ff); |
| } |
| |
| static u16 ar9300_comp_cksum(u8 *data, int dsize) |
| { |
| int it, checksum = 0; |
| |
| for (it = 0; it < dsize; it++) { |
| checksum += data[it]; |
| checksum &= 0xffff; |
| } |
| |
| return checksum; |
| } |
| |
| static bool ar9300_uncompress_block(struct ath_hw *ah, |
| u8 *mptr, |
| int mdataSize, |
| u8 *block, |
| int size) |
| { |
| int it; |
| int spot; |
| int offset; |
| int length; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| spot = 0; |
| |
| for (it = 0; it < size; it += (length+2)) { |
| offset = block[it]; |
| offset &= 0xff; |
| spot += offset; |
| length = block[it+1]; |
| length &= 0xff; |
| |
| if (length > 0 && spot >= 0 && spot+length <= mdataSize) { |
| ath_dbg(common, EEPROM, |
| "Restore at %d: spot=%d offset=%d length=%d\n", |
| it, spot, offset, length); |
| memcpy(&mptr[spot], &block[it+2], length); |
| spot += length; |
| } else if (length > 0) { |
| ath_dbg(common, EEPROM, |
| "Bad restore at %d: spot=%d offset=%d length=%d\n", |
| it, spot, offset, length); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static int ar9300_compress_decision(struct ath_hw *ah, |
| int it, |
| int code, |
| int reference, |
| u8 *mptr, |
| u8 *word, int length, int mdata_size) |
| { |
| struct ath_common *common = ath9k_hw_common(ah); |
| const struct ar9300_eeprom *eep = NULL; |
| |
| switch (code) { |
| case _CompressNone: |
| if (length != mdata_size) { |
| ath_dbg(common, EEPROM, |
| "EEPROM structure size mismatch memory=%d eeprom=%d\n", |
| mdata_size, length); |
| return -1; |
| } |
| memcpy(mptr, (u8 *) (word + COMP_HDR_LEN), length); |
| ath_dbg(common, EEPROM, |
| "restored eeprom %d: uncompressed, length %d\n", |
| it, length); |
| break; |
| case _CompressBlock: |
| if (reference == 0) { |
| } else { |
| eep = ar9003_eeprom_struct_find_by_id(reference); |
| if (eep == NULL) { |
| ath_dbg(common, EEPROM, |
| "can't find reference eeprom struct %d\n", |
| reference); |
| return -1; |
| } |
| memcpy(mptr, eep, mdata_size); |
| } |
| ath_dbg(common, EEPROM, |
| "restore eeprom %d: block, reference %d, length %d\n", |
| it, reference, length); |
| ar9300_uncompress_block(ah, mptr, mdata_size, |
| (u8 *) (word + COMP_HDR_LEN), length); |
| break; |
| default: |
| ath_dbg(common, EEPROM, "unknown compression code %d\n", code); |
| return -1; |
| } |
| return 0; |
| } |
| |
| typedef bool (*eeprom_read_op)(struct ath_hw *ah, int address, u8 *buffer, |
| int count); |
| |
| static bool ar9300_check_header(void *data) |
| { |
| u32 *word = data; |
| return !(*word == 0 || *word == ~0); |
| } |
| |
| static bool ar9300_check_eeprom_header(struct ath_hw *ah, eeprom_read_op read, |
| int base_addr) |
| { |
| u8 header[4]; |
| |
| if (!read(ah, base_addr, header, 4)) |
| return false; |
| |
| return ar9300_check_header(header); |
| } |
| |
| static int ar9300_eeprom_restore_flash(struct ath_hw *ah, u8 *mptr, |
| int mdata_size) |
| { |
| struct ath_common *common = ath9k_hw_common(ah); |
| u16 *data = (u16 *) mptr; |
| int i; |
| |
| for (i = 0; i < mdata_size / 2; i++, data++) |
| ath9k_hw_nvram_read(common, i, data); |
| |
| return 0; |
| } |
| /* |
| * Read the configuration data from the eeprom. |
| * The data can be put in any specified memory buffer. |
| * |
| * Returns -1 on error. |
| * Returns address of next memory location on success. |
| */ |
| static int ar9300_eeprom_restore_internal(struct ath_hw *ah, |
| u8 *mptr, int mdata_size) |
| { |
| #define MDEFAULT 15 |
| #define MSTATE 100 |
| int cptr; |
| u8 *word; |
| int code; |
| int reference, length, major, minor; |
| int osize; |
| int it; |
| u16 checksum, mchecksum; |
| struct ath_common *common = ath9k_hw_common(ah); |
| eeprom_read_op read; |
| |
| if (ath9k_hw_use_flash(ah)) |
| return ar9300_eeprom_restore_flash(ah, mptr, mdata_size); |
| |
| word = kzalloc(2048, GFP_KERNEL); |
| if (!word) |
| return -ENOMEM; |
| |
| memcpy(mptr, &ar9300_default, mdata_size); |
| |
| read = ar9300_read_eeprom; |
| if (AR_SREV_9485(ah)) |
| cptr = AR9300_BASE_ADDR_4K; |
| else if (AR_SREV_9330(ah)) |
| cptr = AR9300_BASE_ADDR_512; |
| else |
| cptr = AR9300_BASE_ADDR; |
| ath_dbg(common, EEPROM, "Trying EEPROM access at Address 0x%04x\n", |
| cptr); |
| if (ar9300_check_eeprom_header(ah, read, cptr)) |
| goto found; |
| |
| cptr = AR9300_BASE_ADDR_512; |
| ath_dbg(common, EEPROM, "Trying EEPROM access at Address 0x%04x\n", |
| cptr); |
| if (ar9300_check_eeprom_header(ah, read, cptr)) |
| goto found; |
| |
| read = ar9300_read_otp; |
| cptr = AR9300_BASE_ADDR; |
| ath_dbg(common, EEPROM, "Trying OTP access at Address 0x%04x\n", cptr); |
| if (ar9300_check_eeprom_header(ah, read, cptr)) |
| goto found; |
| |
| cptr = AR9300_BASE_ADDR_512; |
| ath_dbg(common, EEPROM, "Trying OTP access at Address 0x%04x\n", cptr); |
| if (ar9300_check_eeprom_header(ah, read, cptr)) |
| goto found; |
| |
| goto fail; |
| |
| found: |
| ath_dbg(common, EEPROM, "Found valid EEPROM data\n"); |
| |
| for (it = 0; it < MSTATE; it++) { |
| if (!read(ah, cptr, word, COMP_HDR_LEN)) |
| goto fail; |
| |
| if (!ar9300_check_header(word)) |
| break; |
| |
| ar9300_comp_hdr_unpack(word, &code, &reference, |
| &length, &major, &minor); |
| ath_dbg(common, EEPROM, |
| "Found block at %x: code=%d ref=%d length=%d major=%d minor=%d\n", |
| cptr, code, reference, length, major, minor); |
| if ((!AR_SREV_9485(ah) && length >= 1024) || |
| (AR_SREV_9485(ah) && length > EEPROM_DATA_LEN_9485)) { |
| ath_dbg(common, EEPROM, "Skipping bad header\n"); |
| cptr -= COMP_HDR_LEN; |
| continue; |
| } |
| |
| osize = length; |
| read(ah, cptr, word, COMP_HDR_LEN + osize + COMP_CKSUM_LEN); |
| checksum = ar9300_comp_cksum(&word[COMP_HDR_LEN], length); |
| mchecksum = get_unaligned_le16(&word[COMP_HDR_LEN + osize]); |
| ath_dbg(common, EEPROM, "checksum %x %x\n", |
| checksum, mchecksum); |
| if (checksum == mchecksum) { |
| ar9300_compress_decision(ah, it, code, reference, mptr, |
| word, length, mdata_size); |
| } else { |
| ath_dbg(common, EEPROM, |
| "skipping block with bad checksum\n"); |
| } |
| cptr -= (COMP_HDR_LEN + osize + COMP_CKSUM_LEN); |
| } |
| |
| kfree(word); |
| return cptr; |
| |
| fail: |
| kfree(word); |
| return -1; |
| } |
| |
| /* |
| * Restore the configuration structure by reading the eeprom. |
| * This function destroys any existing in-memory structure |
| * content. |
| */ |
| static bool ath9k_hw_ar9300_fill_eeprom(struct ath_hw *ah) |
| { |
| u8 *mptr = (u8 *) &ah->eeprom.ar9300_eep; |
| |
| if (ar9300_eeprom_restore_internal(ah, mptr, |
| sizeof(struct ar9300_eeprom)) < 0) |
| return false; |
| |
| return true; |
| } |
| |
| #if defined(CONFIG_ATH9K_DEBUGFS) || defined(CONFIG_ATH9K_HTC_DEBUGFS) |
| static u32 ar9003_dump_modal_eeprom(char *buf, u32 len, u32 size, |
| struct ar9300_modal_eep_header *modal_hdr) |
| { |
| PR_EEP("Chain0 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[0])); |
| PR_EEP("Chain1 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[1])); |
| PR_EEP("Chain2 Ant. Control", le16_to_cpu(modal_hdr->antCtrlChain[2])); |
| PR_EEP("Ant. Common Control", le32_to_cpu(modal_hdr->antCtrlCommon)); |
| PR_EEP("Ant. Common Control2", le32_to_cpu(modal_hdr->antCtrlCommon2)); |
| PR_EEP("Ant. Gain", modal_hdr->antennaGain); |
| PR_EEP("Switch Settle", modal_hdr->switchSettling); |
| PR_EEP("Chain0 xatten1DB", modal_hdr->xatten1DB[0]); |
| PR_EEP("Chain1 xatten1DB", modal_hdr->xatten1DB[1]); |
| PR_EEP("Chain2 xatten1DB", modal_hdr->xatten1DB[2]); |
| PR_EEP("Chain0 xatten1Margin", modal_hdr->xatten1Margin[0]); |
| PR_EEP("Chain1 xatten1Margin", modal_hdr->xatten1Margin[1]); |
| PR_EEP("Chain2 xatten1Margin", modal_hdr->xatten1Margin[2]); |
| PR_EEP("Temp Slope", modal_hdr->tempSlope); |
| PR_EEP("Volt Slope", modal_hdr->voltSlope); |
| PR_EEP("spur Channels0", modal_hdr->spurChans[0]); |
| PR_EEP("spur Channels1", modal_hdr->spurChans[1]); |
| PR_EEP("spur Channels2", modal_hdr->spurChans[2]); |
| PR_EEP("spur Channels3", modal_hdr->spurChans[3]); |
| PR_EEP("spur Channels4", modal_hdr->spurChans[4]); |
| PR_EEP("Chain0 NF Threshold", modal_hdr->noiseFloorThreshCh[0]); |
| PR_EEP("Chain1 NF Threshold", modal_hdr->noiseFloorThreshCh[1]); |
| PR_EEP("Chain2 NF Threshold", modal_hdr->noiseFloorThreshCh[2]); |
| PR_EEP("Quick Drop", modal_hdr->quick_drop); |
| PR_EEP("txEndToXpaOff", modal_hdr->txEndToXpaOff); |
| PR_EEP("xPA Bias Level", modal_hdr->xpaBiasLvl); |
| PR_EEP("txFrameToDataStart", modal_hdr->txFrameToDataStart); |
| PR_EEP("txFrameToPaOn", modal_hdr->txFrameToPaOn); |
| PR_EEP("txFrameToXpaOn", modal_hdr->txFrameToXpaOn); |
| PR_EEP("txClip", modal_hdr->txClip); |
| PR_EEP("ADC Desired size", modal_hdr->adcDesiredSize); |
| |
| return len; |
| } |
| |
| static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, |
| u8 *buf, u32 len, u32 size) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct ar9300_base_eep_hdr *pBase; |
| |
| if (!dump_base_hdr) { |
| len += snprintf(buf + len, size - len, |
| "%20s :\n", "2GHz modal Header"); |
| len += ar9003_dump_modal_eeprom(buf, len, size, |
| &eep->modalHeader2G); |
| len += snprintf(buf + len, size - len, |
| "%20s :\n", "5GHz modal Header"); |
| len += ar9003_dump_modal_eeprom(buf, len, size, |
| &eep->modalHeader5G); |
| goto out; |
| } |
| |
| pBase = &eep->baseEepHeader; |
| |
| PR_EEP("EEPROM Version", ah->eeprom.ar9300_eep.eepromVersion); |
| PR_EEP("RegDomain1", le16_to_cpu(pBase->regDmn[0])); |
| PR_EEP("RegDomain2", le16_to_cpu(pBase->regDmn[1])); |
| PR_EEP("TX Mask", (pBase->txrxMask >> 4)); |
| PR_EEP("RX Mask", (pBase->txrxMask & 0x0f)); |
| PR_EEP("Allow 5GHz", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_11A)); |
| PR_EEP("Allow 2GHz", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_11G)); |
| PR_EEP("Disable 2GHz HT20", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_N_2G_HT20)); |
| PR_EEP("Disable 2GHz HT40", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_N_2G_HT40)); |
| PR_EEP("Disable 5Ghz HT20", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_N_5G_HT20)); |
| PR_EEP("Disable 5Ghz HT40", !!(pBase->opCapFlags.opFlags & |
| AR5416_OPFLAGS_N_5G_HT40)); |
| PR_EEP("Big Endian", !!(pBase->opCapFlags.eepMisc & 0x01)); |
| PR_EEP("RF Silent", pBase->rfSilent); |
| PR_EEP("BT option", pBase->blueToothOptions); |
| PR_EEP("Device Cap", pBase->deviceCap); |
| PR_EEP("Device Type", pBase->deviceType); |
| PR_EEP("Power Table Offset", pBase->pwrTableOffset); |
| PR_EEP("Tuning Caps1", pBase->params_for_tuning_caps[0]); |
| PR_EEP("Tuning Caps2", pBase->params_for_tuning_caps[1]); |
| PR_EEP("Enable Tx Temp Comp", !!(pBase->featureEnable & BIT(0))); |
| PR_EEP("Enable Tx Volt Comp", !!(pBase->featureEnable & BIT(1))); |
| PR_EEP("Enable fast clock", !!(pBase->featureEnable & BIT(2))); |
| PR_EEP("Enable doubling", !!(pBase->featureEnable & BIT(3))); |
| PR_EEP("Internal regulator", !!(pBase->featureEnable & BIT(4))); |
| PR_EEP("Enable Paprd", !!(pBase->featureEnable & BIT(5))); |
| PR_EEP("Driver Strength", !!(pBase->miscConfiguration & BIT(0))); |
| PR_EEP("Quick Drop", !!(pBase->miscConfiguration & BIT(1))); |
| PR_EEP("Chain mask Reduce", (pBase->miscConfiguration >> 0x3) & 0x1); |
| PR_EEP("Write enable Gpio", pBase->eepromWriteEnableGpio); |
| PR_EEP("WLAN Disable Gpio", pBase->wlanDisableGpio); |
| PR_EEP("WLAN LED Gpio", pBase->wlanLedGpio); |
| PR_EEP("Rx Band Select Gpio", pBase->rxBandSelectGpio); |
| PR_EEP("Tx Gain", pBase->txrxgain >> 4); |
| PR_EEP("Rx Gain", pBase->txrxgain & 0xf); |
| PR_EEP("SW Reg", le32_to_cpu(pBase->swreg)); |
| |
| len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", |
| ah->eeprom.ar9300_eep.macAddr); |
| out: |
| if (len > size) |
| len = size; |
| |
| return len; |
| } |
| #else |
| static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, |
| u8 *buf, u32 len, u32 size) |
| { |
| return 0; |
| } |
| #endif |
| |
| /* XXX: review hardware docs */ |
| static int ath9k_hw_ar9300_get_eeprom_ver(struct ath_hw *ah) |
| { |
| return ah->eeprom.ar9300_eep.eepromVersion; |
| } |
| |
| /* XXX: could be read from the eepromVersion, not sure yet */ |
| static int ath9k_hw_ar9300_get_eeprom_rev(struct ath_hw *ah) |
| { |
| return 0; |
| } |
| |
| static s32 ar9003_hw_xpa_bias_level_get(struct ath_hw *ah, bool is2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| if (is2ghz) |
| return eep->modalHeader2G.xpaBiasLvl; |
| else |
| return eep->modalHeader5G.xpaBiasLvl; |
| } |
| |
| static void ar9003_hw_xpa_bias_level_apply(struct ath_hw *ah, bool is2ghz) |
| { |
| int bias = ar9003_hw_xpa_bias_level_get(ah, is2ghz); |
| |
| if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah)) |
| REG_RMW_FIELD(ah, AR_CH0_TOP2, AR_CH0_TOP2_XPABIASLVL, bias); |
| else if (AR_SREV_9462(ah)) |
| REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias); |
| else { |
| REG_RMW_FIELD(ah, AR_CH0_TOP, AR_CH0_TOP_XPABIASLVL, bias); |
| REG_RMW_FIELD(ah, AR_CH0_THERM, |
| AR_CH0_THERM_XPABIASLVL_MSB, |
| bias >> 2); |
| REG_RMW_FIELD(ah, AR_CH0_THERM, |
| AR_CH0_THERM_XPASHORT2GND, 1); |
| } |
| } |
| |
| static u16 ar9003_switch_com_spdt_get(struct ath_hw *ah, bool is_2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| __le16 val; |
| |
| if (is_2ghz) |
| val = eep->modalHeader2G.switchcomspdt; |
| else |
| val = eep->modalHeader5G.switchcomspdt; |
| return le16_to_cpu(val); |
| } |
| |
| |
| static u32 ar9003_hw_ant_ctrl_common_get(struct ath_hw *ah, bool is2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| __le32 val; |
| |
| if (is2ghz) |
| val = eep->modalHeader2G.antCtrlCommon; |
| else |
| val = eep->modalHeader5G.antCtrlCommon; |
| return le32_to_cpu(val); |
| } |
| |
| static u32 ar9003_hw_ant_ctrl_common_2_get(struct ath_hw *ah, bool is2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| __le32 val; |
| |
| if (is2ghz) |
| val = eep->modalHeader2G.antCtrlCommon2; |
| else |
| val = eep->modalHeader5G.antCtrlCommon2; |
| return le32_to_cpu(val); |
| } |
| |
| static u16 ar9003_hw_ant_ctrl_chain_get(struct ath_hw *ah, |
| int chain, |
| bool is2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| __le16 val = 0; |
| |
| if (chain >= 0 && chain < AR9300_MAX_CHAINS) { |
| if (is2ghz) |
| val = eep->modalHeader2G.antCtrlChain[chain]; |
| else |
| val = eep->modalHeader5G.antCtrlChain[chain]; |
| } |
| |
| return le16_to_cpu(val); |
| } |
| |
| static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) |
| { |
| int chain; |
| u32 regval; |
| u32 ant_div_ctl1; |
| static const u32 switch_chain_reg[AR9300_MAX_CHAINS] = { |
| AR_PHY_SWITCH_CHAIN_0, |
| AR_PHY_SWITCH_CHAIN_1, |
| AR_PHY_SWITCH_CHAIN_2, |
| }; |
| |
| u32 value = ar9003_hw_ant_ctrl_common_get(ah, is2ghz); |
| |
| if (AR_SREV_9462(ah)) { |
| REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, |
| AR_SWITCH_TABLE_COM_AR9462_ALL, value); |
| } else |
| REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM, |
| AR_SWITCH_TABLE_COM_ALL, value); |
| |
| |
| /* |
| * AR9462 defines new switch table for BT/WLAN, |
| * here's new field name in XXX.ref for both 2G and 5G. |
| * Register: [GLB_CONTROL] GLB_CONTROL (@0x20044) |
| * 15:12 R/W SWITCH_TABLE_COM_SPDT_WLAN_RX |
| * SWITCH_TABLE_COM_SPDT_WLAN_RX |
| * |
| * 11:8 R/W SWITCH_TABLE_COM_SPDT_WLAN_TX |
| * SWITCH_TABLE_COM_SPDT_WLAN_TX |
| * |
| * 7:4 R/W SWITCH_TABLE_COM_SPDT_WLAN_IDLE |
| * SWITCH_TABLE_COM_SPDT_WLAN_IDLE |
| */ |
| if (AR_SREV_9462_20_OR_LATER(ah)) { |
| value = ar9003_switch_com_spdt_get(ah, is2ghz); |
| REG_RMW_FIELD(ah, AR_PHY_GLB_CONTROL, |
| AR_SWITCH_TABLE_COM_SPDT_ALL, value); |
| } |
| |
| value = ar9003_hw_ant_ctrl_common_2_get(ah, is2ghz); |
| REG_RMW_FIELD(ah, AR_PHY_SWITCH_COM_2, AR_SWITCH_TABLE_COM2_ALL, value); |
| |
| for (chain = 0; chain < AR9300_MAX_CHAINS; chain++) { |
| if ((ah->rxchainmask & BIT(chain)) || |
| (ah->txchainmask & BIT(chain))) { |
| value = ar9003_hw_ant_ctrl_chain_get(ah, chain, |
| is2ghz); |
| REG_RMW_FIELD(ah, switch_chain_reg[chain], |
| AR_SWITCH_TABLE_ALL, value); |
| } |
| } |
| |
| if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) { |
| value = ath9k_hw_ar9300_get_eeprom(ah, EEP_ANT_DIV_CTL1); |
| /* |
| * main_lnaconf, alt_lnaconf, main_tb, alt_tb |
| * are the fields present |
| */ |
| regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); |
| regval &= (~AR_ANT_DIV_CTRL_ALL); |
| regval |= (value & 0x3f) << AR_ANT_DIV_CTRL_ALL_S; |
| /* enable_lnadiv */ |
| regval &= (~AR_PHY_9485_ANT_DIV_LNADIV); |
| regval |= ((value >> 6) & 0x1) << |
| AR_PHY_9485_ANT_DIV_LNADIV_S; |
| REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); |
| |
| /*enable fast_div */ |
| regval = REG_READ(ah, AR_PHY_CCK_DETECT); |
| regval &= (~AR_FAST_DIV_ENABLE); |
| regval |= ((value >> 7) & 0x1) << |
| AR_FAST_DIV_ENABLE_S; |
| REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); |
| ant_div_ctl1 = |
| ah->eep_ops->get_eeprom(ah, EEP_ANT_DIV_CTL1); |
| /* check whether antenna diversity is enabled */ |
| if ((ant_div_ctl1 >> 0x6) == 0x3) { |
| regval = REG_READ(ah, AR_PHY_MC_GAIN_CTRL); |
| /* |
| * clear bits 25-30 main_lnaconf, alt_lnaconf, |
| * main_tb, alt_tb |
| */ |
| regval &= (~(AR_PHY_9485_ANT_DIV_MAIN_LNACONF | |
| AR_PHY_9485_ANT_DIV_ALT_LNACONF | |
| AR_PHY_9485_ANT_DIV_ALT_GAINTB | |
| AR_PHY_9485_ANT_DIV_MAIN_GAINTB)); |
| /* by default use LNA1 for the main antenna */ |
| regval |= (AR_PHY_9485_ANT_DIV_LNA1 << |
| AR_PHY_9485_ANT_DIV_MAIN_LNACONF_S); |
| regval |= (AR_PHY_9485_ANT_DIV_LNA2 << |
| AR_PHY_9485_ANT_DIV_ALT_LNACONF_S); |
| REG_WRITE(ah, AR_PHY_MC_GAIN_CTRL, regval); |
| } |
| |
| |
| } |
| |
| } |
| |
| static void ar9003_hw_drive_strength_apply(struct ath_hw *ah) |
| { |
| int drive_strength; |
| unsigned long reg; |
| |
| drive_strength = ath9k_hw_ar9300_get_eeprom(ah, EEP_DRIVE_STRENGTH); |
| |
| if (!drive_strength) |
| return; |
| |
| reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS1); |
| reg &= ~0x00ffffc0; |
| reg |= 0x5 << 21; |
| reg |= 0x5 << 18; |
| reg |= 0x5 << 15; |
| reg |= 0x5 << 12; |
| reg |= 0x5 << 9; |
| reg |= 0x5 << 6; |
| REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS1, reg); |
| |
| reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS2); |
| reg &= ~0xffffffe0; |
| reg |= 0x5 << 29; |
| reg |= 0x5 << 26; |
| reg |= 0x5 << 23; |
| reg |= 0x5 << 20; |
| reg |= 0x5 << 17; |
| reg |= 0x5 << 14; |
| reg |= 0x5 << 11; |
| reg |= 0x5 << 8; |
| reg |= 0x5 << 5; |
| REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS2, reg); |
| |
| reg = REG_READ(ah, AR_PHY_65NM_CH0_BIAS4); |
| reg &= ~0xff800000; |
| reg |= 0x5 << 29; |
| reg |= 0x5 << 26; |
| reg |= 0x5 << 23; |
| REG_WRITE(ah, AR_PHY_65NM_CH0_BIAS4, reg); |
| } |
| |
| static u16 ar9003_hw_atten_chain_get(struct ath_hw *ah, int chain, |
| struct ath9k_channel *chan) |
| { |
| int f[3], t[3]; |
| u16 value; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| if (chain >= 0 && chain < 3) { |
| if (IS_CHAN_2GHZ(chan)) |
| return eep->modalHeader2G.xatten1DB[chain]; |
| else if (eep->base_ext2.xatten1DBLow[chain] != 0) { |
| t[0] = eep->base_ext2.xatten1DBLow[chain]; |
| f[0] = 5180; |
| t[1] = eep->modalHeader5G.xatten1DB[chain]; |
| f[1] = 5500; |
| t[2] = eep->base_ext2.xatten1DBHigh[chain]; |
| f[2] = 5785; |
| value = ar9003_hw_power_interpolate((s32) chan->channel, |
| f, t, 3); |
| return value; |
| } else |
| return eep->modalHeader5G.xatten1DB[chain]; |
| } |
| |
| return 0; |
| } |
| |
| |
| static u16 ar9003_hw_atten_chain_get_margin(struct ath_hw *ah, int chain, |
| struct ath9k_channel *chan) |
| { |
| int f[3], t[3]; |
| u16 value; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| if (chain >= 0 && chain < 3) { |
| if (IS_CHAN_2GHZ(chan)) |
| return eep->modalHeader2G.xatten1Margin[chain]; |
| else if (eep->base_ext2.xatten1MarginLow[chain] != 0) { |
| t[0] = eep->base_ext2.xatten1MarginLow[chain]; |
| f[0] = 5180; |
| t[1] = eep->modalHeader5G.xatten1Margin[chain]; |
| f[1] = 5500; |
| t[2] = eep->base_ext2.xatten1MarginHigh[chain]; |
| f[2] = 5785; |
| value = ar9003_hw_power_interpolate((s32) chan->channel, |
| f, t, 3); |
| return value; |
| } else |
| return eep->modalHeader5G.xatten1Margin[chain]; |
| } |
| |
| return 0; |
| } |
| |
| static void ar9003_hw_atten_apply(struct ath_hw *ah, struct ath9k_channel *chan) |
| { |
| int i; |
| u16 value; |
| unsigned long ext_atten_reg[3] = {AR_PHY_EXT_ATTEN_CTL_0, |
| AR_PHY_EXT_ATTEN_CTL_1, |
| AR_PHY_EXT_ATTEN_CTL_2, |
| }; |
| |
| /* Test value. if 0 then attenuation is unused. Don't load anything. */ |
| for (i = 0; i < 3; i++) { |
| if (ah->txchainmask & BIT(i)) { |
| value = ar9003_hw_atten_chain_get(ah, i, chan); |
| REG_RMW_FIELD(ah, ext_atten_reg[i], |
| AR_PHY_EXT_ATTEN_CTL_XATTEN1_DB, value); |
| |
| value = ar9003_hw_atten_chain_get_margin(ah, i, chan); |
| REG_RMW_FIELD(ah, ext_atten_reg[i], |
| AR_PHY_EXT_ATTEN_CTL_XATTEN1_MARGIN, |
| value); |
| } |
| } |
| } |
| |
| static bool is_pmu_set(struct ath_hw *ah, u32 pmu_reg, int pmu_set) |
| { |
| int timeout = 100; |
| |
| while (pmu_set != REG_READ(ah, pmu_reg)) { |
| if (timeout-- == 0) |
| return false; |
| REG_WRITE(ah, pmu_reg, pmu_set); |
| udelay(10); |
| } |
| |
| return true; |
| } |
| |
| static void ar9003_hw_internal_regulator_apply(struct ath_hw *ah) |
| { |
| int internal_regulator = |
| ath9k_hw_ar9300_get_eeprom(ah, EEP_INTERNAL_REGULATOR); |
| u32 reg_val; |
| |
| if (internal_regulator) { |
| if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) { |
| int reg_pmu_set; |
| |
| reg_pmu_set = REG_READ(ah, AR_PHY_PMU2) & ~AR_PHY_PMU2_PGM; |
| REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set); |
| if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set)) |
| return; |
| |
| if (AR_SREV_9330(ah)) { |
| if (ah->is_clk_25mhz) { |
| reg_pmu_set = (3 << 1) | (8 << 4) | |
| (3 << 8) | (1 << 14) | |
| (6 << 17) | (1 << 20) | |
| (3 << 24); |
| } else { |
| reg_pmu_set = (4 << 1) | (7 << 4) | |
| (3 << 8) | (1 << 14) | |
| (6 << 17) | (1 << 20) | |
| (3 << 24); |
| } |
| } else { |
| reg_pmu_set = (5 << 1) | (7 << 4) | |
| (2 << 8) | (2 << 14) | |
| (6 << 17) | (1 << 20) | |
| (3 << 24) | (1 << 28); |
| } |
| |
| REG_WRITE(ah, AR_PHY_PMU1, reg_pmu_set); |
| if (!is_pmu_set(ah, AR_PHY_PMU1, reg_pmu_set)) |
| return; |
| |
| reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0xFFC00000) |
| | (4 << 26); |
| REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set); |
| if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set)) |
| return; |
| |
| reg_pmu_set = (REG_READ(ah, AR_PHY_PMU2) & ~0x00200000) |
| | (1 << 21); |
| REG_WRITE(ah, AR_PHY_PMU2, reg_pmu_set); |
| if (!is_pmu_set(ah, AR_PHY_PMU2, reg_pmu_set)) |
| return; |
| } else if (AR_SREV_9462(ah)) { |
| reg_val = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG); |
| REG_WRITE(ah, AR_PHY_PMU1, reg_val); |
| } else { |
| /* Internal regulator is ON. Write swreg register. */ |
| reg_val = ath9k_hw_ar9300_get_eeprom(ah, EEP_SWREG); |
| REG_WRITE(ah, AR_RTC_REG_CONTROL1, |
| REG_READ(ah, AR_RTC_REG_CONTROL1) & |
| (~AR_RTC_REG_CONTROL1_SWREG_PROGRAM)); |
| REG_WRITE(ah, AR_RTC_REG_CONTROL0, reg_val); |
| /* Set REG_CONTROL1.SWREG_PROGRAM */ |
| REG_WRITE(ah, AR_RTC_REG_CONTROL1, |
| REG_READ(ah, |
| AR_RTC_REG_CONTROL1) | |
| AR_RTC_REG_CONTROL1_SWREG_PROGRAM); |
| } |
| } else { |
| if (AR_SREV_9330(ah) || AR_SREV_9485(ah)) { |
| REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0); |
| while (REG_READ_FIELD(ah, AR_PHY_PMU2, |
| AR_PHY_PMU2_PGM)) |
| udelay(10); |
| |
| REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1); |
| while (!REG_READ_FIELD(ah, AR_PHY_PMU1, |
| AR_PHY_PMU1_PWD)) |
| udelay(10); |
| REG_RMW_FIELD(ah, AR_PHY_PMU2, AR_PHY_PMU2_PGM, 0x1); |
| while (!REG_READ_FIELD(ah, AR_PHY_PMU2, |
| AR_PHY_PMU2_PGM)) |
| udelay(10); |
| } else if (AR_SREV_9462(ah)) |
| REG_RMW_FIELD(ah, AR_PHY_PMU1, AR_PHY_PMU1_PWD, 0x1); |
| else { |
| reg_val = REG_READ(ah, AR_RTC_SLEEP_CLK) | |
| AR_RTC_FORCE_SWREG_PRD; |
| REG_WRITE(ah, AR_RTC_SLEEP_CLK, reg_val); |
| } |
| } |
| |
| } |
| |
| static void ar9003_hw_apply_tuning_caps(struct ath_hw *ah) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| u8 tuning_caps_param = eep->baseEepHeader.params_for_tuning_caps[0]; |
| |
| if (eep->baseEepHeader.featureEnable & 0x40) { |
| tuning_caps_param &= 0x7f; |
| REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPINDAC, |
| tuning_caps_param); |
| REG_RMW_FIELD(ah, AR_CH0_XTAL, AR_CH0_XTAL_CAPOUTDAC, |
| tuning_caps_param); |
| } |
| } |
| |
| static void ar9003_hw_quick_drop_apply(struct ath_hw *ah, u16 freq) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| int quick_drop = ath9k_hw_ar9300_get_eeprom(ah, EEP_QUICK_DROP); |
| s32 t[3], f[3] = {5180, 5500, 5785}; |
| |
| if (!quick_drop) |
| return; |
| |
| if (freq < 4000) |
| quick_drop = eep->modalHeader2G.quick_drop; |
| else { |
| t[0] = eep->base_ext1.quick_drop_low; |
| t[1] = eep->modalHeader5G.quick_drop; |
| t[2] = eep->base_ext1.quick_drop_high; |
| quick_drop = ar9003_hw_power_interpolate(freq, f, t, 3); |
| } |
| REG_RMW_FIELD(ah, AR_PHY_AGC, AR_PHY_AGC_QUICK_DROP, quick_drop); |
| } |
| |
| static void ar9003_hw_txend_to_xpa_off_apply(struct ath_hw *ah, u16 freq) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| u32 value; |
| |
| value = (freq < 4000) ? eep->modalHeader2G.txEndToXpaOff : |
| eep->modalHeader5G.txEndToXpaOff; |
| |
| REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, |
| AR_PHY_XPA_TIMING_CTL_TX_END_XPAB_OFF, value); |
| REG_RMW_FIELD(ah, AR_PHY_XPA_TIMING_CTL, |
| AR_PHY_XPA_TIMING_CTL_TX_END_XPAA_OFF, value); |
| } |
| |
| static void ath9k_hw_ar9300_set_board_values(struct ath_hw *ah, |
| struct ath9k_channel *chan) |
| { |
| ar9003_hw_xpa_bias_level_apply(ah, IS_CHAN_2GHZ(chan)); |
| ar9003_hw_ant_ctrl_apply(ah, IS_CHAN_2GHZ(chan)); |
| ar9003_hw_drive_strength_apply(ah); |
| ar9003_hw_atten_apply(ah, chan); |
| ar9003_hw_quick_drop_apply(ah, chan->channel); |
| if (!AR_SREV_9330(ah) && !AR_SREV_9340(ah)) |
| ar9003_hw_internal_regulator_apply(ah); |
| if (AR_SREV_9485(ah) || AR_SREV_9330(ah) || AR_SREV_9340(ah)) |
| ar9003_hw_apply_tuning_caps(ah); |
| ar9003_hw_txend_to_xpa_off_apply(ah, chan->channel); |
| } |
| |
| static void ath9k_hw_ar9300_set_addac(struct ath_hw *ah, |
| struct ath9k_channel *chan) |
| { |
| } |
| |
| /* |
| * Returns the interpolated y value corresponding to the specified x value |
| * from the np ordered pairs of data (px,py). |
| * The pairs do not have to be in any order. |
| * If the specified x value is less than any of the px, |
| * the returned y value is equal to the py for the lowest px. |
| * If the specified x value is greater than any of the px, |
| * the returned y value is equal to the py for the highest px. |
| */ |
| static int ar9003_hw_power_interpolate(int32_t x, |
| int32_t *px, int32_t *py, u_int16_t np) |
| { |
| int ip = 0; |
| int lx = 0, ly = 0, lhave = 0; |
| int hx = 0, hy = 0, hhave = 0; |
| int dx = 0; |
| int y = 0; |
| |
| lhave = 0; |
| hhave = 0; |
| |
| /* identify best lower and higher x calibration measurement */ |
| for (ip = 0; ip < np; ip++) { |
| dx = x - px[ip]; |
| |
| /* this measurement is higher than our desired x */ |
| if (dx <= 0) { |
| if (!hhave || dx > (x - hx)) { |
| /* new best higher x measurement */ |
| hx = px[ip]; |
| hy = py[ip]; |
| hhave = 1; |
| } |
| } |
| /* this measurement is lower than our desired x */ |
| if (dx >= 0) { |
| if (!lhave || dx < (x - lx)) { |
| /* new best lower x measurement */ |
| lx = px[ip]; |
| ly = py[ip]; |
| lhave = 1; |
| } |
| } |
| } |
| |
| /* the low x is good */ |
| if (lhave) { |
| /* so is the high x */ |
| if (hhave) { |
| /* they're the same, so just pick one */ |
| if (hx == lx) |
| y = ly; |
| else /* interpolate */ |
| y = interpolate(x, lx, hx, ly, hy); |
| } else /* only low is good, use it */ |
| y = ly; |
| } else if (hhave) /* only high is good, use it */ |
| y = hy; |
| else /* nothing is good,this should never happen unless np=0, ???? */ |
| y = -(1 << 30); |
| return y; |
| } |
| |
| static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah, |
| u16 rateIndex, u16 freq, bool is2GHz) |
| { |
| u16 numPiers, i; |
| s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS]; |
| s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS]; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct cal_tgt_pow_legacy *pEepromTargetPwr; |
| u8 *pFreqBin; |
| |
| if (is2GHz) { |
| numPiers = AR9300_NUM_2G_20_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower2G; |
| pFreqBin = eep->calTarget_freqbin_2G; |
| } else { |
| numPiers = AR9300_NUM_5G_20_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower5G; |
| pFreqBin = eep->calTarget_freqbin_5G; |
| } |
| |
| /* |
| * create array of channels and targetpower from |
| * targetpower piers stored on eeprom |
| */ |
| for (i = 0; i < numPiers; i++) { |
| freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); |
| targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; |
| } |
| |
| /* interpolate to get target power for given frequency */ |
| return (u8) ar9003_hw_power_interpolate((s32) freq, |
| freqArray, |
| targetPowerArray, numPiers); |
| } |
| |
| static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah, |
| u16 rateIndex, |
| u16 freq, bool is2GHz) |
| { |
| u16 numPiers, i; |
| s32 targetPowerArray[AR9300_NUM_5G_20_TARGET_POWERS]; |
| s32 freqArray[AR9300_NUM_5G_20_TARGET_POWERS]; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct cal_tgt_pow_ht *pEepromTargetPwr; |
| u8 *pFreqBin; |
| |
| if (is2GHz) { |
| numPiers = AR9300_NUM_2G_20_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower2GHT20; |
| pFreqBin = eep->calTarget_freqbin_2GHT20; |
| } else { |
| numPiers = AR9300_NUM_5G_20_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower5GHT20; |
| pFreqBin = eep->calTarget_freqbin_5GHT20; |
| } |
| |
| /* |
| * create array of channels and targetpower |
| * from targetpower piers stored on eeprom |
| */ |
| for (i = 0; i < numPiers; i++) { |
| freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); |
| targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; |
| } |
| |
| /* interpolate to get target power for given frequency */ |
| return (u8) ar9003_hw_power_interpolate((s32) freq, |
| freqArray, |
| targetPowerArray, numPiers); |
| } |
| |
| static u8 ar9003_hw_eeprom_get_ht40_tgt_pwr(struct ath_hw *ah, |
| u16 rateIndex, |
| u16 freq, bool is2GHz) |
| { |
| u16 numPiers, i; |
| s32 targetPowerArray[AR9300_NUM_5G_40_TARGET_POWERS]; |
| s32 freqArray[AR9300_NUM_5G_40_TARGET_POWERS]; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct cal_tgt_pow_ht *pEepromTargetPwr; |
| u8 *pFreqBin; |
| |
| if (is2GHz) { |
| numPiers = AR9300_NUM_2G_40_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower2GHT40; |
| pFreqBin = eep->calTarget_freqbin_2GHT40; |
| } else { |
| numPiers = AR9300_NUM_5G_40_TARGET_POWERS; |
| pEepromTargetPwr = eep->calTargetPower5GHT40; |
| pFreqBin = eep->calTarget_freqbin_5GHT40; |
| } |
| |
| /* |
| * create array of channels and targetpower from |
| * targetpower piers stored on eeprom |
| */ |
| for (i = 0; i < numPiers; i++) { |
| freqArray[i] = FBIN2FREQ(pFreqBin[i], is2GHz); |
| targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; |
| } |
| |
| /* interpolate to get target power for given frequency */ |
| return (u8) ar9003_hw_power_interpolate((s32) freq, |
| freqArray, |
| targetPowerArray, numPiers); |
| } |
| |
| static u8 ar9003_hw_eeprom_get_cck_tgt_pwr(struct ath_hw *ah, |
| u16 rateIndex, u16 freq) |
| { |
| u16 numPiers = AR9300_NUM_2G_CCK_TARGET_POWERS, i; |
| s32 targetPowerArray[AR9300_NUM_2G_CCK_TARGET_POWERS]; |
| s32 freqArray[AR9300_NUM_2G_CCK_TARGET_POWERS]; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct cal_tgt_pow_legacy *pEepromTargetPwr = eep->calTargetPowerCck; |
| u8 *pFreqBin = eep->calTarget_freqbin_Cck; |
| |
| /* |
| * create array of channels and targetpower from |
| * targetpower piers stored on eeprom |
| */ |
| for (i = 0; i < numPiers; i++) { |
| freqArray[i] = FBIN2FREQ(pFreqBin[i], 1); |
| targetPowerArray[i] = pEepromTargetPwr[i].tPow2x[rateIndex]; |
| } |
| |
| /* interpolate to get target power for given frequency */ |
| return (u8) ar9003_hw_power_interpolate((s32) freq, |
| freqArray, |
| targetPowerArray, numPiers); |
| } |
| |
| /* Set tx power registers to array of values passed in */ |
| static int ar9003_hw_tx_power_regwrite(struct ath_hw *ah, u8 * pPwrArray) |
| { |
| #define POW_SM(_r, _s) (((_r) & 0x3f) << (_s)) |
| /* make sure forced gain is not set */ |
| REG_WRITE(ah, AR_PHY_TX_FORCED_GAIN, 0); |
| |
| /* Write the OFDM power per rate set */ |
| |
| /* 6 (LSB), 9, 12, 18 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(0), |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0)); |
| |
| /* 24 (LSB), 36, 48, 54 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(1), |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_54], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_48], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_36], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 0)); |
| |
| /* Write the CCK power per rate set */ |
| |
| /* 1L (LSB), reserved, 2L, 2S (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(2), |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) | |
| /* POW_SM(txPowerTimes2, 8) | this is reserved for AR9003 */ |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0)); |
| |
| /* 5.5L (LSB), 5.5S, 11L, 11S (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(3), |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_11S], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_11L], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_5S], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0) |
| ); |
| |
| /* Write the power for duplicated frames - HT40 */ |
| |
| /* dup40_cck (LSB), dup40_ofdm, ext20_cck, ext20_ofdm (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(8), |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_6_24], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_LEGACY_1L_5L], 0) |
| ); |
| |
| /* Write the HT20 power per rate set */ |
| |
| /* 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(4), |
| POW_SM(pPwrArray[ALL_TARGET_HT20_5], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_4], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_1_3_9_11_17_19], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_0_8_16], 0) |
| ); |
| |
| /* 6 (LSB), 7, 12, 13 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(5), |
| POW_SM(pPwrArray[ALL_TARGET_HT20_13], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_12], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_7], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_6], 0) |
| ); |
| |
| /* 14 (LSB), 15, 20, 21 */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(9), |
| POW_SM(pPwrArray[ALL_TARGET_HT20_21], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_20], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_15], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_14], 0) |
| ); |
| |
| /* Mixed HT20 and HT40 rates */ |
| |
| /* HT20 22 (LSB), HT20 23, HT40 22, HT40 23 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(10), |
| POW_SM(pPwrArray[ALL_TARGET_HT40_23], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_22], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_23], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT20_22], 0) |
| ); |
| |
| /* |
| * Write the HT40 power per rate set |
| * correct PAR difference between HT40 and HT20/LEGACY |
| * 0/8/16 (LSB), 1-3/9-11/17-19, 4, 5 (MSB) |
| */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(6), |
| POW_SM(pPwrArray[ALL_TARGET_HT40_5], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_4], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_1_3_9_11_17_19], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_0_8_16], 0) |
| ); |
| |
| /* 6 (LSB), 7, 12, 13 (MSB) */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(7), |
| POW_SM(pPwrArray[ALL_TARGET_HT40_13], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_12], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_7], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_6], 0) |
| ); |
| |
| /* 14 (LSB), 15, 20, 21 */ |
| REG_WRITE(ah, AR_PHY_POWER_TX_RATE(11), |
| POW_SM(pPwrArray[ALL_TARGET_HT40_21], 24) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_20], 16) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_15], 8) | |
| POW_SM(pPwrArray[ALL_TARGET_HT40_14], 0) |
| ); |
| |
| return 0; |
| #undef POW_SM |
| } |
| |
| static void ar9003_hw_set_target_power_eeprom(struct ath_hw *ah, u16 freq, |
| u8 *targetPowerValT2) |
| { |
| /* XXX: hard code for now, need to get from eeprom struct */ |
| u8 ht40PowerIncForPdadc = 0; |
| bool is2GHz = false; |
| unsigned int i = 0; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| if (freq < 4000) |
| is2GHz = true; |
| |
| targetPowerValT2[ALL_TARGET_LEGACY_6_24] = |
| ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_6_24, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_LEGACY_36] = |
| ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_36, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_LEGACY_48] = |
| ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_48, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_LEGACY_54] = |
| ar9003_hw_eeprom_get_tgt_pwr(ah, LEGACY_TARGET_RATE_54, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_LEGACY_1L_5L] = |
| ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_1L_5L, |
| freq); |
| targetPowerValT2[ALL_TARGET_LEGACY_5S] = |
| ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_5S, freq); |
| targetPowerValT2[ALL_TARGET_LEGACY_11L] = |
| ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11L, freq); |
| targetPowerValT2[ALL_TARGET_LEGACY_11S] = |
| ar9003_hw_eeprom_get_cck_tgt_pwr(ah, LEGACY_TARGET_RATE_11S, freq); |
| targetPowerValT2[ALL_TARGET_HT20_0_8_16] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_1_3_9_11_17_19] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19, |
| freq, is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_4] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_4, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_5] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_5, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_6] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_6, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_7] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_7, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_12] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_12, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_13] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_13, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_14] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_14, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_15] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_15, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_20] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_20, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_21] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_21, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_22] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_22, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT20_23] = |
| ar9003_hw_eeprom_get_ht20_tgt_pwr(ah, HT_TARGET_RATE_23, freq, |
| is2GHz); |
| targetPowerValT2[ALL_TARGET_HT40_0_8_16] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_0_8_16, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_1_3_9_11_17_19] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_1_3_9_11_17_19, |
| freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_4] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_4, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_5] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_5, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_6] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_6, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_7] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_7, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_12] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_12, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_13] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_13, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_14] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_14, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_15] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_15, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_20] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_20, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_21] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_21, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_22] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_22, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| targetPowerValT2[ALL_TARGET_HT40_23] = |
| ar9003_hw_eeprom_get_ht40_tgt_pwr(ah, HT_TARGET_RATE_23, freq, |
| is2GHz) + ht40PowerIncForPdadc; |
| |
| for (i = 0; i < ar9300RateSize; i++) { |
| ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n", |
| i, targetPowerValT2[i]); |
| } |
| } |
| |
| static int ar9003_hw_cal_pier_get(struct ath_hw *ah, |
| int mode, |
| int ipier, |
| int ichain, |
| int *pfrequency, |
| int *pcorrection, |
| int *ptemperature, int *pvoltage) |
| { |
| u8 *pCalPier; |
| struct ar9300_cal_data_per_freq_op_loop *pCalPierStruct; |
| int is2GHz; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| if (ichain >= AR9300_MAX_CHAINS) { |
| ath_dbg(common, EEPROM, |
| "Invalid chain index, must be less than %d\n", |
| AR9300_MAX_CHAINS); |
| return -1; |
| } |
| |
| if (mode) { /* 5GHz */ |
| if (ipier >= AR9300_NUM_5G_CAL_PIERS) { |
| ath_dbg(common, EEPROM, |
| "Invalid 5GHz cal pier index, must be less than %d\n", |
| AR9300_NUM_5G_CAL_PIERS); |
| return -1; |
| } |
| pCalPier = &(eep->calFreqPier5G[ipier]); |
| pCalPierStruct = &(eep->calPierData5G[ichain][ipier]); |
| is2GHz = 0; |
| } else { |
| if (ipier >= AR9300_NUM_2G_CAL_PIERS) { |
| ath_dbg(common, EEPROM, |
| "Invalid 2GHz cal pier index, must be less than %d\n", |
| AR9300_NUM_2G_CAL_PIERS); |
| return -1; |
| } |
| |
| pCalPier = &(eep->calFreqPier2G[ipier]); |
| pCalPierStruct = &(eep->calPierData2G[ichain][ipier]); |
| is2GHz = 1; |
| } |
| |
| *pfrequency = FBIN2FREQ(*pCalPier, is2GHz); |
| *pcorrection = pCalPierStruct->refPower; |
| *ptemperature = pCalPierStruct->tempMeas; |
| *pvoltage = pCalPierStruct->voltMeas; |
| |
| return 0; |
| } |
| |
| static int ar9003_hw_power_control_override(struct ath_hw *ah, |
| int frequency, |
| int *correction, |
| int *voltage, int *temperature) |
| { |
| int tempSlope = 0; |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| int f[3], t[3]; |
| |
| REG_RMW(ah, AR_PHY_TPC_11_B0, |
| (correction[0] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), |
| AR_PHY_TPC_OLPC_GAIN_DELTA); |
| if (ah->caps.tx_chainmask & BIT(1)) |
| REG_RMW(ah, AR_PHY_TPC_11_B1, |
| (correction[1] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), |
| AR_PHY_TPC_OLPC_GAIN_DELTA); |
| if (ah->caps.tx_chainmask & BIT(2)) |
| REG_RMW(ah, AR_PHY_TPC_11_B2, |
| (correction[2] << AR_PHY_TPC_OLPC_GAIN_DELTA_S), |
| AR_PHY_TPC_OLPC_GAIN_DELTA); |
| |
| /* enable open loop power control on chip */ |
| REG_RMW(ah, AR_PHY_TPC_6_B0, |
| (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), |
| AR_PHY_TPC_6_ERROR_EST_MODE); |
| if (ah->caps.tx_chainmask & BIT(1)) |
| REG_RMW(ah, AR_PHY_TPC_6_B1, |
| (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), |
| AR_PHY_TPC_6_ERROR_EST_MODE); |
| if (ah->caps.tx_chainmask & BIT(2)) |
| REG_RMW(ah, AR_PHY_TPC_6_B2, |
| (3 << AR_PHY_TPC_6_ERROR_EST_MODE_S), |
| AR_PHY_TPC_6_ERROR_EST_MODE); |
| |
| /* |
| * enable temperature compensation |
| * Need to use register names |
| */ |
| if (frequency < 4000) |
| tempSlope = eep->modalHeader2G.tempSlope; |
| else if (eep->base_ext2.tempSlopeLow != 0) { |
| t[0] = eep->base_ext2.tempSlopeLow; |
| f[0] = 5180; |
| t[1] = eep->modalHeader5G.tempSlope; |
| f[1] = 5500; |
| t[2] = eep->base_ext2.tempSlopeHigh; |
| f[2] = 5785; |
| tempSlope = ar9003_hw_power_interpolate((s32) frequency, |
| f, t, 3); |
| } else |
| tempSlope = eep->modalHeader5G.tempSlope; |
| |
| REG_RMW_FIELD(ah, AR_PHY_TPC_19, AR_PHY_TPC_19_ALPHA_THERM, tempSlope); |
| |
| if (AR_SREV_9462_20(ah)) |
| REG_RMW_FIELD(ah, AR_PHY_TPC_19_B1, |
| AR_PHY_TPC_19_B1_ALPHA_THERM, tempSlope); |
| |
| |
| REG_RMW_FIELD(ah, AR_PHY_TPC_18, AR_PHY_TPC_18_THERM_CAL_VALUE, |
| temperature[0]); |
| |
| return 0; |
| } |
| |
| /* Apply the recorded correction values. */ |
| static int ar9003_hw_calibration_apply(struct ath_hw *ah, int frequency) |
| { |
| int ichain, ipier, npier; |
| int mode; |
| int lfrequency[AR9300_MAX_CHAINS], |
| lcorrection[AR9300_MAX_CHAINS], |
| ltemperature[AR9300_MAX_CHAINS], lvoltage[AR9300_MAX_CHAINS]; |
| int hfrequency[AR9300_MAX_CHAINS], |
| hcorrection[AR9300_MAX_CHAINS], |
| htemperature[AR9300_MAX_CHAINS], hvoltage[AR9300_MAX_CHAINS]; |
| int fdiff; |
| int correction[AR9300_MAX_CHAINS], |
| voltage[AR9300_MAX_CHAINS], temperature[AR9300_MAX_CHAINS]; |
| int pfrequency, pcorrection, ptemperature, pvoltage; |
| struct ath_common *common = ath9k_hw_common(ah); |
| |
| mode = (frequency >= 4000); |
| if (mode) |
| npier = AR9300_NUM_5G_CAL_PIERS; |
| else |
| npier = AR9300_NUM_2G_CAL_PIERS; |
| |
| for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { |
| lfrequency[ichain] = 0; |
| hfrequency[ichain] = 100000; |
| } |
| /* identify best lower and higher frequency calibration measurement */ |
| for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { |
| for (ipier = 0; ipier < npier; ipier++) { |
| if (!ar9003_hw_cal_pier_get(ah, mode, ipier, ichain, |
| &pfrequency, &pcorrection, |
| &ptemperature, &pvoltage)) { |
| fdiff = frequency - pfrequency; |
| |
| /* |
| * this measurement is higher than |
| * our desired frequency |
| */ |
| if (fdiff <= 0) { |
| if (hfrequency[ichain] <= 0 || |
| hfrequency[ichain] >= 100000 || |
| fdiff > |
| (frequency - hfrequency[ichain])) { |
| /* |
| * new best higher |
| * frequency measurement |
| */ |
| hfrequency[ichain] = pfrequency; |
| hcorrection[ichain] = |
| pcorrection; |
| htemperature[ichain] = |
| ptemperature; |
| hvoltage[ichain] = pvoltage; |
| } |
| } |
| if (fdiff >= 0) { |
| if (lfrequency[ichain] <= 0 |
| || fdiff < |
| (frequency - lfrequency[ichain])) { |
| /* |
| * new best lower |
| * frequency measurement |
| */ |
| lfrequency[ichain] = pfrequency; |
| lcorrection[ichain] = |
| pcorrection; |
| ltemperature[ichain] = |
| ptemperature; |
| lvoltage[ichain] = pvoltage; |
| } |
| } |
| } |
| } |
| } |
| |
| /* interpolate */ |
| for (ichain = 0; ichain < AR9300_MAX_CHAINS; ichain++) { |
| ath_dbg(common, EEPROM, "ch=%d f=%d low=%d %d h=%d %d\n", |
| ichain, frequency, lfrequency[ichain], |
| lcorrection[ichain], hfrequency[ichain], |
| hcorrection[ichain]); |
| /* they're the same, so just pick one */ |
| if (hfrequency[ichain] == lfrequency[ichain]) { |
| correction[ichain] = lcorrection[ichain]; |
| voltage[ichain] = lvoltage[ichain]; |
| temperature[ichain] = ltemperature[ichain]; |
| } |
| /* the low frequency is good */ |
| else if (frequency - lfrequency[ichain] < 1000) { |
| /* so is the high frequency, interpolate */ |
| if (hfrequency[ichain] - frequency < 1000) { |
| |
| correction[ichain] = interpolate(frequency, |
| lfrequency[ichain], |
| hfrequency[ichain], |
| lcorrection[ichain], |
| hcorrection[ichain]); |
| |
| temperature[ichain] = interpolate(frequency, |
| lfrequency[ichain], |
| hfrequency[ichain], |
| ltemperature[ichain], |
| htemperature[ichain]); |
| |
| voltage[ichain] = interpolate(frequency, |
| lfrequency[ichain], |
| hfrequency[ichain], |
| lvoltage[ichain], |
| hvoltage[ichain]); |
| } |
| /* only low is good, use it */ |
| else { |
| correction[ichain] = lcorrection[ichain]; |
| temperature[ichain] = ltemperature[ichain]; |
| voltage[ichain] = lvoltage[ichain]; |
| } |
| } |
| /* only high is good, use it */ |
| else if (hfrequency[ichain] - frequency < 1000) { |
| correction[ichain] = hcorrection[ichain]; |
| temperature[ichain] = htemperature[ichain]; |
| voltage[ichain] = hvoltage[ichain]; |
| } else { /* nothing is good, presume 0???? */ |
| correction[ichain] = 0; |
| temperature[ichain] = 0; |
| voltage[ichain] = 0; |
| } |
| } |
| |
| ar9003_hw_power_control_override(ah, frequency, correction, voltage, |
| temperature); |
| |
| ath_dbg(common, EEPROM, |
| "for frequency=%d, calibration correction = %d %d %d\n", |
| frequency, correction[0], correction[1], correction[2]); |
| |
| return 0; |
| } |
| |
| static u16 ar9003_hw_get_direct_edge_power(struct ar9300_eeprom *eep, |
| int idx, |
| int edge, |
| bool is2GHz) |
| { |
| struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; |
| struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; |
| |
| if (is2GHz) |
| return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]); |
| else |
| return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]); |
| } |
| |
| static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep, |
| int idx, |
| unsigned int edge, |
| u16 freq, |
| bool is2GHz) |
| { |
| struct cal_ctl_data_2g *ctl_2g = eep->ctlPowerData_2G; |
| struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G; |
| |
| u8 *ctl_freqbin = is2GHz ? |
| &eep->ctl_freqbin_2G[idx][0] : |
| &eep->ctl_freqbin_5G[idx][0]; |
| |
| if (is2GHz) { |
| if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq && |
| CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1])) |
| return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]); |
| } else { |
| if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq && |
| CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1])) |
| return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]); |
| } |
| |
| return MAX_RATE_POWER; |
| } |
| |
| /* |
| * Find the maximum conformance test limit for the given channel and CTL info |
| */ |
| static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, |
| u16 freq, int idx, bool is2GHz) |
| { |
| u16 twiceMaxEdgePower = MAX_RATE_POWER; |
| u8 *ctl_freqbin = is2GHz ? |
| &eep->ctl_freqbin_2G[idx][0] : |
| &eep->ctl_freqbin_5G[idx][0]; |
| u16 num_edges = is2GHz ? |
| AR9300_NUM_BAND_EDGES_2G : AR9300_NUM_BAND_EDGES_5G; |
| unsigned int edge; |
| |
| /* Get the edge power */ |
| for (edge = 0; |
| (edge < num_edges) && (ctl_freqbin[edge] != AR5416_BCHAN_UNUSED); |
| edge++) { |
| /* |
| * If there's an exact channel match or an inband flag set |
| * on the lower channel use the given rdEdgePower |
| */ |
| if (freq == ath9k_hw_fbin2freq(ctl_freqbin[edge], is2GHz)) { |
| twiceMaxEdgePower = |
| ar9003_hw_get_direct_edge_power(eep, idx, |
| edge, is2GHz); |
| break; |
| } else if ((edge > 0) && |
| (freq < ath9k_hw_fbin2freq(ctl_freqbin[edge], |
| is2GHz))) { |
| twiceMaxEdgePower = |
| ar9003_hw_get_indirect_edge_power(eep, idx, |
| edge, freq, |
| is2GHz); |
| /* |
| * Leave loop - no more affecting edges possible in |
| * this monotonic increasing list |
| */ |
| break; |
| } |
| } |
| return twiceMaxEdgePower; |
| } |
| |
| static void ar9003_hw_set_power_per_rate_table(struct ath_hw *ah, |
| struct ath9k_channel *chan, |
| u8 *pPwrArray, u16 cfgCtl, |
| u8 antenna_reduction, |
| u16 powerLimit) |
| { |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ar9300_eeprom *pEepData = &ah->eeprom.ar9300_eep; |
| u16 twiceMaxEdgePower; |
| int i; |
| u16 scaledPower = 0, minCtlPower; |
| static const u16 ctlModesFor11a[] = { |
| CTL_11A, CTL_5GHT20, CTL_11A_EXT, CTL_5GHT40 |
| }; |
| static const u16 ctlModesFor11g[] = { |
| CTL_11B, CTL_11G, CTL_2GHT20, CTL_11B_EXT, |
| CTL_11G_EXT, CTL_2GHT40 |
| }; |
| u16 numCtlModes; |
| const u16 *pCtlMode; |
| u16 ctlMode, freq; |
| struct chan_centers centers; |
| u8 *ctlIndex; |
| u8 ctlNum; |
| u16 twiceMinEdgePower; |
| bool is2ghz = IS_CHAN_2GHZ(chan); |
| |
| ath9k_hw_get_channel_centers(ah, chan, ¢ers); |
| scaledPower = powerLimit - antenna_reduction; |
| |
| /* |
| * Reduce scaled Power by number of chains active to get |
| * to per chain tx power level |
| */ |
| switch (ar5416_get_ntxchains(ah->txchainmask)) { |
| case 1: |
| break; |
| case 2: |
| if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN) |
| scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN; |
| else |
| scaledPower = 0; |
| break; |
| case 3: |
| if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN) |
| scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN; |
| else |
| scaledPower = 0; |
| break; |
| } |
| |
| scaledPower = max((u16)0, scaledPower); |
| |
| /* |
| * Get target powers from EEPROM - our baseline for TX Power |
| */ |
| if (is2ghz) { |
| /* Setup for CTL modes */ |
| /* CTL_11B, CTL_11G, CTL_2GHT20 */ |
| numCtlModes = |
| ARRAY_SIZE(ctlModesFor11g) - |
| SUB_NUM_CTL_MODES_AT_2G_40; |
| pCtlMode = ctlModesFor11g; |
| if (IS_CHAN_HT40(chan)) |
| /* All 2G CTL's */ |
| numCtlModes = ARRAY_SIZE(ctlModesFor11g); |
| } else { |
| /* Setup for CTL modes */ |
| /* CTL_11A, CTL_5GHT20 */ |
| numCtlModes = ARRAY_SIZE(ctlModesFor11a) - |
| SUB_NUM_CTL_MODES_AT_5G_40; |
| pCtlMode = ctlModesFor11a; |
| if (IS_CHAN_HT40(chan)) |
| /* All 5G CTL's */ |
| numCtlModes = ARRAY_SIZE(ctlModesFor11a); |
| } |
| |
| /* |
| * For MIMO, need to apply regulatory caps individually across |
| * dynamically running modes: CCK, OFDM, HT20, HT40 |
| * |
| * The outer loop walks through each possible applicable runtime mode. |
| * The inner loop walks through each ctlIndex entry in EEPROM. |
| * The ctl value is encoded as [7:4] == test group, [3:0] == test mode. |
| */ |
| for (ctlMode = 0; ctlMode < numCtlModes; ctlMode++) { |
| bool isHt40CtlMode = (pCtlMode[ctlMode] == CTL_5GHT40) || |
| (pCtlMode[ctlMode] == CTL_2GHT40); |
| if (isHt40CtlMode) |
| freq = centers.synth_center; |
| else if (pCtlMode[ctlMode] & EXT_ADDITIVE) |
| freq = centers.ext_center; |
| else |
| freq = centers.ctl_center; |
| |
| ath_dbg(common, REGULATORY, |
| "LOOP-Mode ctlMode %d < %d, isHt40CtlMode %d, EXT_ADDITIVE %d\n", |
| ctlMode, numCtlModes, isHt40CtlMode, |
| (pCtlMode[ctlMode] & EXT_ADDITIVE)); |
| |
| /* walk through each CTL index stored in EEPROM */ |
| if (is2ghz) { |
| ctlIndex = pEepData->ctlIndex_2G; |
| ctlNum = AR9300_NUM_CTLS_2G; |
| } else { |
| ctlIndex = pEepData->ctlIndex_5G; |
| ctlNum = AR9300_NUM_CTLS_5G; |
| } |
| |
| twiceMaxEdgePower = MAX_RATE_POWER; |
| for (i = 0; (i < ctlNum) && ctlIndex[i]; i++) { |
| ath_dbg(common, REGULATORY, |
| "LOOP-Ctlidx %d: cfgCtl 0x%2.2x pCtlMode 0x%2.2x ctlIndex 0x%2.2x chan %d\n", |
| i, cfgCtl, pCtlMode[ctlMode], ctlIndex[i], |
| chan->channel); |
| |
| /* |
| * compare test group from regulatory |
| * channel list with test mode from pCtlMode |
| * list |
| */ |
| if ((((cfgCtl & ~CTL_MODE_M) | |
| (pCtlMode[ctlMode] & CTL_MODE_M)) == |
| ctlIndex[i]) || |
| (((cfgCtl & ~CTL_MODE_M) | |
| (pCtlMode[ctlMode] & CTL_MODE_M)) == |
| ((ctlIndex[i] & CTL_MODE_M) | |
| SD_NO_CTL))) { |
| twiceMinEdgePower = |
| ar9003_hw_get_max_edge_power(pEepData, |
| freq, i, |
| is2ghz); |
| |
| if ((cfgCtl & ~CTL_MODE_M) == SD_NO_CTL) |
| /* |
| * Find the minimum of all CTL |
| * edge powers that apply to |
| * this channel |
| */ |
| twiceMaxEdgePower = |
| min(twiceMaxEdgePower, |
| twiceMinEdgePower); |
| else { |
| /* specific */ |
| twiceMaxEdgePower = |
| twiceMinEdgePower; |
| break; |
| } |
| } |
| } |
| |
| minCtlPower = (u8)min(twiceMaxEdgePower, scaledPower); |
| |
| ath_dbg(common, REGULATORY, |
| "SEL-Min ctlMode %d pCtlMode %d 2xMaxEdge %d sP %d minCtlPwr %d\n", |
| ctlMode, pCtlMode[ctlMode], twiceMaxEdgePower, |
| scaledPower, minCtlPower); |
| |
| /* Apply ctl mode to correct target power set */ |
| switch (pCtlMode[ctlMode]) { |
| case CTL_11B: |
| for (i = ALL_TARGET_LEGACY_1L_5L; |
| i <= ALL_TARGET_LEGACY_11S; i++) |
| pPwrArray[i] = |
| (u8)min((u16)pPwrArray[i], |
| minCtlPower); |
| break; |
| case CTL_11A: |
| case CTL_11G: |
| for (i = ALL_TARGET_LEGACY_6_24; |
| i <= ALL_TARGET_LEGACY_54; i++) |
| pPwrArray[i] = |
| (u8)min((u16)pPwrArray[i], |
| minCtlPower); |
| break; |
| case CTL_5GHT20: |
| case CTL_2GHT20: |
| for (i = ALL_TARGET_HT20_0_8_16; |
| i <= ALL_TARGET_HT20_21; i++) |
| pPwrArray[i] = |
| (u8)min((u16)pPwrArray[i], |
| minCtlPower); |
| pPwrArray[ALL_TARGET_HT20_22] = |
| (u8)min((u16)pPwrArray[ALL_TARGET_HT20_22], |
| minCtlPower); |
| pPwrArray[ALL_TARGET_HT20_23] = |
| (u8)min((u16)pPwrArray[ALL_TARGET_HT20_23], |
| minCtlPower); |
| break; |
| case CTL_5GHT40: |
| case CTL_2GHT40: |
| for (i = ALL_TARGET_HT40_0_8_16; |
| i <= ALL_TARGET_HT40_23; i++) |
| pPwrArray[i] = |
| (u8)min((u16)pPwrArray[i], |
| minCtlPower); |
| break; |
| default: |
| break; |
| } |
| } /* end ctl mode checking */ |
| } |
| |
| static inline u8 mcsidx_to_tgtpwridx(unsigned int mcs_idx, u8 base_pwridx) |
| { |
| u8 mod_idx = mcs_idx % 8; |
| |
| if (mod_idx <= 3) |
| return mod_idx ? (base_pwridx + 1) : base_pwridx; |
| else |
| return base_pwridx + 4 * (mcs_idx / 8) + mod_idx - 2; |
| } |
| |
| static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, |
| struct ath9k_channel *chan, u16 cfgCtl, |
| u8 twiceAntennaReduction, |
| u8 powerLimit, bool test) |
| { |
| struct ath_regulatory *regulatory = ath9k_hw_regulatory(ah); |
| struct ath_common *common = ath9k_hw_common(ah); |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| struct ar9300_modal_eep_header *modal_hdr; |
| u8 targetPowerValT2[ar9300RateSize]; |
| u8 target_power_val_t2_eep[ar9300RateSize]; |
| unsigned int i = 0, paprd_scale_factor = 0; |
| u8 pwr_idx, min_pwridx = 0; |
| |
| ar9003_hw_set_target_power_eeprom(ah, chan->channel, targetPowerValT2); |
| |
| if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) { |
| if (IS_CHAN_2GHZ(chan)) |
| modal_hdr = &eep->modalHeader2G; |
| else |
| modal_hdr = &eep->modalHeader5G; |
| |
| ah->paprd_ratemask = |
| le32_to_cpu(modal_hdr->papdRateMaskHt20) & |
| AR9300_PAPRD_RATE_MASK; |
| |
| ah->paprd_ratemask_ht40 = |
| le32_to_cpu(modal_hdr->papdRateMaskHt40) & |
| AR9300_PAPRD_RATE_MASK; |
| |
| paprd_scale_factor = ar9003_get_paprd_scale_factor(ah, chan); |
| min_pwridx = IS_CHAN_HT40(chan) ? ALL_TARGET_HT40_0_8_16 : |
| ALL_TARGET_HT20_0_8_16; |
| |
| if (!ah->paprd_table_write_done) { |
| memcpy(target_power_val_t2_eep, targetPowerValT2, |
| sizeof(targetPowerValT2)); |
| for (i = 0; i < 24; i++) { |
| pwr_idx = mcsidx_to_tgtpwridx(i, min_pwridx); |
| if (ah->paprd_ratemask & (1 << i)) { |
| if (targetPowerValT2[pwr_idx] && |
| targetPowerValT2[pwr_idx] == |
| target_power_val_t2_eep[pwr_idx]) |
| targetPowerValT2[pwr_idx] -= |
| paprd_scale_factor; |
| } |
| } |
| } |
| memcpy(target_power_val_t2_eep, targetPowerValT2, |
| sizeof(targetPowerValT2)); |
| } |
| |
| ar9003_hw_set_power_per_rate_table(ah, chan, |
| targetPowerValT2, cfgCtl, |
| twiceAntennaReduction, |
| powerLimit); |
| |
| if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) { |
| for (i = 0; i < ar9300RateSize; i++) { |
| if ((ah->paprd_ratemask & (1 << i)) && |
| (abs(targetPowerValT2[i] - |
| target_power_val_t2_eep[i]) > |
| paprd_scale_factor)) { |
| ah->paprd_ratemask &= ~(1 << i); |
| ath_dbg(common, EEPROM, |
| "paprd disabled for mcs %d\n", i); |
| } |
| } |
| } |
| |
| regulatory->max_power_level = 0; |
| for (i = 0; i < ar9300RateSize; i++) { |
| if (targetPowerValT2[i] > regulatory->max_power_level) |
| regulatory->max_power_level = targetPowerValT2[i]; |
| } |
| |
| ath9k_hw_update_regulatory_maxpower(ah); |
| |
| if (test) |
| return; |
| |
| for (i = 0; i < ar9300RateSize; i++) { |
| ath_dbg(common, EEPROM, "TPC[%02d] 0x%08x\n", |
| i, targetPowerValT2[i]); |
| } |
| |
| ah->txpower_limit = regulatory->max_power_level; |
| |
| /* Write target power array to registers */ |
| ar9003_hw_tx_power_regwrite(ah, targetPowerValT2); |
| ar9003_hw_calibration_apply(ah, chan->channel); |
| |
| if (IS_CHAN_2GHZ(chan)) { |
| if (IS_CHAN_HT40(chan)) |
| i = ALL_TARGET_HT40_0_8_16; |
| else |
| i = ALL_TARGET_HT20_0_8_16; |
| } else { |
| if (IS_CHAN_HT40(chan)) |
| i = ALL_TARGET_HT40_7; |
| else |
| i = ALL_TARGET_HT20_7; |
| } |
| ah->paprd_target_power = targetPowerValT2[i]; |
| } |
| |
| static u16 ath9k_hw_ar9300_get_spur_channel(struct ath_hw *ah, |
| u16 i, bool is2GHz) |
| { |
| return AR_NO_SPUR; |
| } |
| |
| s32 ar9003_hw_get_tx_gain_idx(struct ath_hw *ah) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| return (eep->baseEepHeader.txrxgain >> 4) & 0xf; /* bits 7:4 */ |
| } |
| |
| s32 ar9003_hw_get_rx_gain_idx(struct ath_hw *ah) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| return (eep->baseEepHeader.txrxgain) & 0xf; /* bits 3:0 */ |
| } |
| |
| u8 *ar9003_get_spur_chan_ptr(struct ath_hw *ah, bool is_2ghz) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| if (is_2ghz) |
| return eep->modalHeader2G.spurChans; |
| else |
| return eep->modalHeader5G.spurChans; |
| } |
| |
| unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah, |
| struct ath9k_channel *chan) |
| { |
| struct ar9300_eeprom *eep = &ah->eeprom.ar9300_eep; |
| |
| if (IS_CHAN_2GHZ(chan)) |
| return MS(le32_to_cpu(eep->modalHeader2G.papdRateMaskHt20), |
| AR9300_PAPRD_SCALE_1); |
| else { |
| if (chan->channel >= 5700) |
| return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt20), |
| AR9300_PAPRD_SCALE_1); |
| else if (chan->channel >= 5400) |
| return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), |
| AR9300_PAPRD_SCALE_2); |
| else |
| return MS(le32_to_cpu(eep->modalHeader5G.papdRateMaskHt40), |
| AR9300_PAPRD_SCALE_1); |
| } |
| } |
| |
| const struct eeprom_ops eep_ar9300_ops = { |
| .check_eeprom = ath9k_hw_ar9300_check_eeprom, |
| .get_eeprom = ath9k_hw_ar9300_get_eeprom, |
| .fill_eeprom = ath9k_hw_ar9300_fill_eeprom, |
| .dump_eeprom = ath9k_hw_ar9003_dump_eeprom, |
| .get_eeprom_ver = ath9k_hw_ar9300_get_eeprom_ver, |
| .get_eeprom_rev = ath9k_hw_ar9300_get_eeprom_rev, |
| .set_board_values = ath9k_hw_ar9300_set_board_values, |
| .set_addac = ath9k_hw_ar9300_set_addac, |
| .set_txpower = ath9k_hw_ar9300_set_txpower, |
| .get_spur_channel = ath9k_hw_ar9300_get_spur_channel |
| }; |