diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index d57bcfb..89c768e 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1090,14 +1090,11 @@
  */
 static int fsl_vbus_draw(struct usb_gadget *gadget, unsigned mA)
 {
-#ifdef CONFIG_USB_OTG
 	struct fsl_udc *udc;
 
 	udc = container_of(gadget, struct fsl_udc, gadget);
-
 	if (udc->transceiver)
 		return otg_set_power(udc->transceiver, mA);
-#endif
 	return -ENOTSUPP;
 }
 
@@ -1321,7 +1318,7 @@
 				| USB_TYPE_STANDARD)) {
 			/* Note: The driver has not include OTG support yet.
 			 * This will be set when OTG support is added */
-			if (!udc->gadget.is_otg)
+			if (!gadget_is_otg(udc->gadget))
 				break;
 			else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE)
 				udc->gadget.b_hnp_enable = 1;
@@ -1330,6 +1327,8 @@
 			else if (setup->bRequest ==
 					USB_DEVICE_A_ALT_HNP_SUPPORT)
 				udc->gadget.a_alt_hnp_support = 1;
+			else
+				break;
 			rc = 0;
 		} else
 			break;
@@ -1840,10 +1839,8 @@
 	if (!driver || driver != udc_controller->driver || !driver->unbind)
 		return -EINVAL;
 
-#ifdef CONFIG_USB_OTG
 	if (udc_controller->transceiver)
 		(void)otg_set_peripheral(udc_controller->transceiver, 0);
-#endif
 
 	/* stop DR, disable intr */
 	dr_controller_stop(udc_controller);
diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c
index 173004f..129eda5 100644
--- a/drivers/usb/gadget/inode.c
+++ b/drivers/usb/gadget/inode.c
@@ -20,8 +20,7 @@
  */
 
 
-// #define	DEBUG			/* data to help fault diagnosis */
-// #define	VERBOSE		/* extra debug messages (success too) */
+/* #define VERBOSE_DEBUG */
 
 #include <linux/init.h>
 #include <linux/module.h>
@@ -253,7 +252,7 @@
 	do { } while (0)
 #endif /* DEBUG */
 
-#ifdef VERBOSE
+#ifdef VERBOSE_DEBUG
 #define VDEBUG	DBG
 #else
 #define VDEBUG(dev,fmt,args...) \
@@ -1010,11 +1009,12 @@
 			/* assume that was SET_CONFIGURATION */
 			if (dev->current_config) {
 				unsigned power;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-				if (dev->gadget->speed == USB_SPEED_HIGH)
+
+				if (gadget_is_dualspeed(dev->gadget)
+						&& (dev->gadget->speed
+							== USB_SPEED_HIGH))
 					power = dev->hs_config->bMaxPower;
 				else
-#endif
 					power = dev->config->bMaxPower;
 				usb_gadget_vbus_draw(dev->gadget, 2 * power);
 			}
@@ -1355,24 +1355,21 @@
 config_buf (struct dev_data *dev, u8 type, unsigned index)
 {
 	int		len;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	int		hs;
-#endif
+	int		hs = 0;
 
 	/* only one configuration */
 	if (index > 0)
 		return -EINVAL;
 
-#ifdef CONFIG_USB_GADGET_DUALSPEED
-	hs = (dev->gadget->speed == USB_SPEED_HIGH);
-	if (type == USB_DT_OTHER_SPEED_CONFIG)
-		hs = !hs;
+	if (gadget_is_dualspeed(dev->gadget)) {
+		hs = (dev->gadget->speed == USB_SPEED_HIGH);
+		if (type == USB_DT_OTHER_SPEED_CONFIG)
+			hs = !hs;
+	}
 	if (hs) {
 		dev->req->buf = dev->hs_config;
 		len = le16_to_cpu(dev->hs_config->wTotalLength);
-	} else
-#endif
-	{
+	} else {
 		dev->req->buf = dev->config;
 		len = le16_to_cpu(dev->config->wTotalLength);
 	}
@@ -1393,13 +1390,13 @@
 	spin_lock (&dev->lock);
 	dev->setup_abort = 0;
 	if (dev->state == STATE_DEV_UNCONNECTED) {
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-		if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == NULL) {
+		if (gadget_is_dualspeed(gadget)
+				&& gadget->speed == USB_SPEED_HIGH
+				&& dev->hs_config == NULL) {
 			spin_unlock(&dev->lock);
 			ERROR (dev, "no high speed config??\n");
 			return -EINVAL;
 		}
-#endif	/* CONFIG_USB_GADGET_DUALSPEED */
 
 		dev->state = STATE_DEV_CONNECTED;
 		dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
@@ -1469,13 +1466,12 @@
 			// user mode expected to disable endpoints
 		} else {
 			u8	config, power;
-#ifdef	CONFIG_USB_GADGET_DUALSPEED
-			if (gadget->speed == USB_SPEED_HIGH) {
+
+			if (gadget_is_dualspeed(gadget)
+					&& gadget->speed == USB_SPEED_HIGH) {
 				config = dev->hs_config->bConfigurationValue;
 				power = dev->hs_config->bMaxPower;
-			} else
-#endif
-			{
+			} else {
 				config = dev->config->bConfigurationValue;
 				power = dev->config->bMaxPower;
 			}
diff --git a/drivers/usb/gadget/omap_udc.c b/drivers/usb/gadget/omap_udc.c
index 9b0f092..bf2788d 100644
--- a/drivers/usb/gadget/omap_udc.c
+++ b/drivers/usb/gadget/omap_udc.c
@@ -1241,19 +1241,15 @@
 	udc->gadget.dev.parent->power.power_state = PMSG_ON;
 	udc->gadget.dev.power.power_state = PMSG_ON;
 	UDC_SYSCON1_REG |= UDC_PULLUP_EN;
-#ifndef CONFIG_USB_OTG
-	if (!cpu_is_omap15xx())
+	if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
 		OTG_CTRL_REG |= OTG_BSESSVLD;
-#endif
 	UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
 }
 
 static void pullup_disable(struct omap_udc *udc)
 {
-#ifndef CONFIG_USB_OTG
-	if (!cpu_is_omap15xx())
+	if (!gadget_is_otg(udc->gadget) && !cpu_is_omap15xx())
 		OTG_CTRL_REG &= ~OTG_BSESSVLD;
-#endif
 	UDC_IRQ_EN_REG = UDC_DS_CHG_IE;
 	UDC_SYSCON1_REG &= ~UDC_PULLUP_EN;
 }
@@ -1390,7 +1386,7 @@
 {
 	u16	devstat;
 
-	if (!udc->gadget.is_otg)
+	if (!gadget_is_otg(udc->gadget))
 		return;
 
 	if (OTG_CTRL_REG & OTG_ID)