[ALSA] document - Add PM support

Modules: Documentation

Mark the drivers newly supporting PM in the documentation.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 84068ba..9a58ed9 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -148,6 +148,8 @@
     Module supports up to 8 cards. This module does not support autoprobe
     thus main port must be specified!!! Other ports are optional.
     
+    The power-management is supported.
+
   Module snd-ad1889
   -----------------
 
@@ -186,6 +188,8 @@
     
     Module supports up to 8 cards, autoprobe and PnP.
 
+    The power-management is supported.
+
   Module snd-als4000
   ------------------
 
@@ -196,6 +200,8 @@
     
     Module supports up to 8 cards, autoprobe and PnP.
 
+    The power-management is supported.
+
   Module snd-atiixp
   -----------------
 
@@ -213,6 +219,8 @@
     implementation depends on the motherboard, and you'll need to
     choose the correct one via spdif_aclink module option.
 
+    The power-management is supported.
+
   Module snd-atiixp-modem
   -----------------------
 
@@ -223,6 +231,8 @@
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-au8810, snd-au8820, snd-au8830
   -----------------------------------------
 
@@ -265,6 +275,8 @@
     
     Module supports up to 8 cards, PnP and autoprobe.
     
+    The power-management is supported.
+
   Module snd-azt3328
   ------------------
 
@@ -310,6 +322,8 @@
 
     Module supports up to 8 cards and autoprobe.
 
+    The power-management is supported.
+
   Module snd-cmipci
   -----------------
 
@@ -323,6 +337,8 @@
 
     Module supports autoprobe and multiple chips (max 8).
     
+    The power-management is supported.
+
   Module snd-cs4231
   -----------------
 
@@ -433,6 +449,8 @@
     Module supports up to 8 cards.  This module is enabled only with
     ISA PnP support.
 
+    The power-management is supported.
+
   Module snd-dummy
   ----------------
 
@@ -440,6 +458,8 @@
     or input, but you may use this module for any application which
     requires a sound card (like RealPlayer).
 
+    The power-management is supported.
+
   Module snd-emu10k1
   ------------------
 
@@ -473,6 +493,8 @@
 	* Creative Card 5.1 (c) 2003			[0x3fc3/0x7cff]
         * Creative Card all ins and outs		[0x3fff/0x7fff]
     
+    The power-management is supported.
+
   Module snd-emu10k1x
   -------------------
 
@@ -515,6 +537,8 @@
     
     Module supports up to 8 cards, PnP and autoprobe.
     
+    The power-management is supported.
+
   Module snd-es1688
   -----------------
 
@@ -554,6 +578,8 @@
 
     Module supports up to 8 cards and autoprobe.
 
+    The power-management is supported.
+
   Module snd-es1968
   -----------------
 
@@ -586,6 +612,8 @@
 
     Module supports up to 8 cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-gusclassic
   ---------------------
 
@@ -695,6 +723,8 @@
 	    (Usually SD_LPLIB register is more accurate than the
 	    position buffer.)
 
+    The power-management is supported.
+
   Module snd-hdsp
   ---------------
 
@@ -846,6 +876,8 @@
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-interwave
   --------------------
 
@@ -1091,6 +1123,8 @@
 
     For ARM architecture only.
 
+    The power-management is supported.
+
   Module snd-rme32
   ----------------
 
@@ -1131,6 +1165,8 @@
     Module supports only one card.
     Module has no enable and index options.
 
+    The power-management is supported.
+
   Module snd-sb8
   --------------
 
@@ -1144,6 +1180,8 @@
 
     Module supports up to 8 cards and autoprobe.
     
+    The power-management is supported.
+
   Module snd-sb16 and snd-sbawe
   -----------------------------
 
@@ -1170,6 +1208,8 @@
           half duplex mode through 8-bit DMA channel by disabling their
           16-bit DMA channel.
     
+    The power-management is supported.
+
   Module snd-sgalaxy
   ------------------
 
@@ -1182,6 +1222,8 @@
 
     Module supports up to 8 cards.
 
+    The power-management is supported.
+
   Module snd-sscape
   -----------------
 
@@ -1363,6 +1405,8 @@
     Note: for the MPU401 on VIA823x, use snd-mpu401 driver
 	  additionally.  The mpu_port option is for VIA686 chips only.
 
+    The power-management is supported.
+
   Module snd-via82xx-modem
   ------------------------
 
@@ -1375,6 +1419,8 @@
     Note: The default index value of this module is -2, i.e. the first
           slot is excluded.
 
+    The power-management is supported.
+
   Module snd-virmidi
   ------------------
 
@@ -1413,6 +1459,8 @@
     size is chosen.  The possible IBL values can be found in
     /proc/asound/cardX/vx-status proc file.
 
+    The power-management is supported.
+
   Module snd-vxpocket
   -------------------
 
@@ -1441,6 +1489,8 @@
     Note2: snd-vxp440 driver is merged to snd-vxpocket driver since
            ALSA 1.0.10.
 
+    The power-management is supported.
+
   Module snd-ymfpci
   -----------------
 
@@ -1465,6 +1515,8 @@
 
     Note: the driver is build only when CONFIG_ISA is set.
 
+    The power-management is supported.
+
 
 AC97 Quirk Option
 =================