Merge branch 'exynos-fix' of .git into next
diff --git a/Documentation/devicetree/bindings/thermal/armada-thermal.txt b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
new file mode 100644
index 0000000..fff93d5
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/armada-thermal.txt
@@ -0,0 +1,22 @@
+* Marvell Armada 370/XP thermal management
+
+Required properties:
+
+- compatible: Should be set to one of the following:
+ marvell,armada370-thermal
+ marvell,armadaxp-thermal
+
+- reg: Device's register space.
+ Two entries are expected, see the examples below.
+ The first one is required for the sensor register;
+ the second one is required for the control register
+ to be used for sensor initialization (a.k.a. calibration).
+
+Example:
+
+ thermal@d0018300 {
+ compatible = "marvell,armada370-thermal";
+ reg = <0xd0018300 0x4
+ 0xd0018304 0x4>;
+ status = "okay";
+ };
diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation
index b73bbfb..36a3e79 100644
--- a/Documentation/thermal/exynos_thermal_emulation
+++ b/Documentation/thermal/exynos_thermal_emulation
@@ -13,11 +13,11 @@
manually with software code and TMU will read current temperature from user value not from
sensor's value.
-Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available.
-When it's enabled, sysfs node will be created under
-/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'.
+Enabling CONFIG_THERMAL_EMULATION option will make this support available.
+When it's enabled, sysfs node will be created as
+/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp.
-The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any
+The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any
temperature you want to update to sysfs node, it automatically enable emulation mode and
current temperature will be changed into it.
(Exynos also supports user changable delay time which would be used to delay of
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 6859661..b2ffe98 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -265,6 +265,10 @@
Unit: millidegree Celsius
WO, Optional
+ WARNING: Be careful while enabling this option on production systems,
+ because userland can easily disable the thermal policy by simply
+ flooding this sysfs node with low temperature values.
+
*****************************
* Cooling device attributes *
*****************************
@@ -375,11 +379,3 @@
This function serves as an arbitrator to set the state of a cooling
device. It sets the cooling device to the deepest cooling state if
possible.
-
-5.5:thermal_register_governor:
-This function lets the various thermal governors to register themselves
-with the Thermal framework. At run time, depending on a zone's platform
-data, a particular governor is used for throttling.
-
-5.6:thermal_unregister_governor:
-This function unregisters a governor from the thermal framework.
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index a764f16..d1c2160 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -67,7 +67,7 @@
Enable this to let the user space manage the platform thermals.
config CPU_THERMAL
- tristate "generic cpu cooling support"
+ bool "generic cpu cooling support"
depends on CPU_FREQ
select CPU_FREQ_TABLE
help
@@ -86,6 +86,10 @@
user can manually input temperature and test the different trip
threshold behaviour for simulation purpose.
+ WARNING: Be careful while enabling this option on production systems,
+ because userland can easily disable the thermal policy by simply
+ flooding this sysfs node with low temperature values.
+
config SPEAR_THERMAL
bool "SPEAr thermal sensor driver"
depends on PLAT_SPEAR
@@ -117,15 +121,6 @@
If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS series of SoC.
-config EXYNOS_THERMAL_EMUL
- bool "EXYNOS TMU emulation mode support"
- depends on EXYNOS_THERMAL
- help
- Exynos 4412 and 4414 and 5 series has emulation mode on TMU.
- Enable this option will be make sysfs node in exynos thermal platform
- device directory to support emulation mode. With emulation mode sysfs
- node, you can manually input temperature to TMU for simulation purpose.
-
config DOVE_THERMAL
tristate "Temperature sensor on Marvell Dove SoCs"
depends on ARCH_DOVE
@@ -144,6 +139,14 @@
created. Cooling devices can be bound to the trip points to cool this
thermal zone if trip points reached.
+config ARMADA_THERMAL
+ tristate "Armada 370/XP thermal management"
+ depends on ARCH_MVEBU
+ depends on OF
+ help
+ Enable this option if you want to have support for thermal management
+ controller present in Armada 370 and Armada XP SoC.
+
config DB8500_CPUFREQ_COOLING
tristate "DB8500 cpufreq cooling"
depends on ARCH_U8500
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index d3a2b38c..c054d41 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -3,14 +3,15 @@
#
obj-$(CONFIG_THERMAL) += thermal_sys.o
+thermal_sys-y += thermal_core.o
# governors
-obj-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
-obj-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o
-obj-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
+thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
+thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o
+thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
# cpufreq cooling
-obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
+thermal_sys-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
# platform thermal drivers
obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
@@ -19,6 +20,7 @@
obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
+obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_DB8500_CPUFREQ_COOLING) += db8500_cpufreq_cooling.o
obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c
new file mode 100644
index 0000000..5b4d75f
--- /dev/null
+++ b/drivers/thermal/armada_thermal.c
@@ -0,0 +1,232 @@
+/*
+ * Marvell Armada 370/XP thermal sensor driver
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/thermal.h>
+
+#define THERMAL_VALID_OFFSET 9
+#define THERMAL_VALID_MASK 0x1
+#define THERMAL_TEMP_OFFSET 10
+#define THERMAL_TEMP_MASK 0x1ff
+
+/* Thermal Manager Control and Status Register */
+#define PMU_TDC0_SW_RST_MASK (0x1 << 1)
+#define PMU_TM_DISABLE_OFFS 0
+#define PMU_TM_DISABLE_MASK (0x1 << PMU_TM_DISABLE_OFFS)
+#define PMU_TDC0_REF_CAL_CNT_OFFS 11
+#define PMU_TDC0_REF_CAL_CNT_MASK (0x1ff << PMU_TDC0_REF_CAL_CNT_OFFS)
+#define PMU_TDC0_OTF_CAL_MASK (0x1 << 30)
+#define PMU_TDC0_START_CAL_MASK (0x1 << 25)
+
+struct armada_thermal_ops;
+
+/* Marvell EBU Thermal Sensor Dev Structure */
+struct armada_thermal_priv {
+ void __iomem *sensor;
+ void __iomem *control;
+ struct armada_thermal_ops *ops;
+};
+
+struct armada_thermal_ops {
+ /* Initialize the sensor */
+ void (*init_sensor)(struct armada_thermal_priv *);
+
+ /* Test for a valid sensor value (optional) */
+ bool (*is_valid)(struct armada_thermal_priv *);
+};
+
+static void armadaxp_init_sensor(struct armada_thermal_priv *priv)
+{
+ unsigned long reg;
+
+ reg = readl_relaxed(priv->control);
+ reg |= PMU_TDC0_OTF_CAL_MASK;
+ writel(reg, priv->control);
+
+ /* Reference calibration value */
+ reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+ reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+ writel(reg, priv->control);
+
+ /* Reset the sensor */
+ reg = readl_relaxed(priv->control);
+ writel((reg | PMU_TDC0_SW_RST_MASK), priv->control);
+
+ writel(reg, priv->control);
+
+ /* Enable the sensor */
+ reg = readl_relaxed(priv->sensor);
+ reg &= ~PMU_TM_DISABLE_MASK;
+ writel(reg, priv->sensor);
+}
+
+static void armada370_init_sensor(struct armada_thermal_priv *priv)
+{
+ unsigned long reg;
+
+ reg = readl_relaxed(priv->control);
+ reg |= PMU_TDC0_OTF_CAL_MASK;
+ writel(reg, priv->control);
+
+ /* Reference calibration value */
+ reg &= ~PMU_TDC0_REF_CAL_CNT_MASK;
+ reg |= (0xf1 << PMU_TDC0_REF_CAL_CNT_OFFS);
+ writel(reg, priv->control);
+
+ reg &= ~PMU_TDC0_START_CAL_MASK;
+ writel(reg, priv->control);
+
+ mdelay(10);
+}
+
+static bool armada_is_valid(struct armada_thermal_priv *priv)
+{
+ unsigned long reg = readl_relaxed(priv->sensor);
+
+ return (reg >> THERMAL_VALID_OFFSET) & THERMAL_VALID_MASK;
+}
+
+static int armada_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ struct armada_thermal_priv *priv = thermal->devdata;
+ unsigned long reg;
+
+ /* Valid check */
+ if (priv->ops->is_valid && !priv->ops->is_valid(priv)) {
+ dev_err(&thermal->device,
+ "Temperature sensor reading not valid\n");
+ return -EIO;
+ }
+
+ reg = readl_relaxed(priv->sensor);
+ reg = (reg >> THERMAL_TEMP_OFFSET) & THERMAL_TEMP_MASK;
+ *temp = (3153000000UL - (10000000UL*reg)) / 13825;
+ return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+ .get_temp = armada_get_temp,
+};
+
+static const struct armada_thermal_ops armadaxp_ops = {
+ .init_sensor = armadaxp_init_sensor,
+};
+
+static const struct armada_thermal_ops armada370_ops = {
+ .is_valid = armada_is_valid,
+ .init_sensor = armada370_init_sensor,
+};
+
+static const struct of_device_id armada_thermal_id_table[] = {
+ {
+ .compatible = "marvell,armadaxp-thermal",
+ .data = &armadaxp_ops,
+ },
+ {
+ .compatible = "marvell,armada370-thermal",
+ .data = &armada370_ops,
+ },
+ {
+ /* sentinel */
+ },
+};
+MODULE_DEVICE_TABLE(of, armada_thermal_id_table);
+
+static int armada_thermal_probe(struct platform_device *pdev)
+{
+ struct thermal_zone_device *thermal;
+ const struct of_device_id *match;
+ struct armada_thermal_priv *priv;
+ struct resource *res;
+
+ match = of_match_device(armada_thermal_id_table, &pdev->dev);
+ if (!match)
+ return -ENODEV;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get platform resource\n");
+ return -ENODEV;
+ }
+
+ priv->sensor = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->sensor))
+ return PTR_ERR(priv->sensor);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get platform resource\n");
+ return -ENODEV;
+ }
+
+ priv->control = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->control))
+ return PTR_ERR(priv->control);
+
+ priv->ops = (struct armada_thermal_ops *)match->data;
+ priv->ops->init_sensor(priv);
+
+ thermal = thermal_zone_device_register("armada_thermal", 0, 0,
+ priv, &ops, NULL, 0, 0);
+ if (IS_ERR(thermal)) {
+ dev_err(&pdev->dev,
+ "Failed to register thermal zone device\n");
+ return PTR_ERR(thermal);
+ }
+
+ platform_set_drvdata(pdev, thermal);
+
+ return 0;
+}
+
+static int armada_thermal_exit(struct platform_device *pdev)
+{
+ struct thermal_zone_device *armada_thermal =
+ platform_get_drvdata(pdev);
+
+ thermal_zone_device_unregister(armada_thermal);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver armada_thermal_driver = {
+ .probe = armada_thermal_probe,
+ .remove = armada_thermal_exit,
+ .driver = {
+ .name = "armada_thermal",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(armada_thermal_id_table),
+ },
+};
+
+module_platform_driver(armada_thermal_driver);
+
+MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
+MODULE_DESCRIPTION("Armada 370/XP thermal driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 8dc44cb..768b508 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -108,6 +108,105 @@
return !cpufreq_get_policy(&policy, cpu);
}
+enum cpufreq_cooling_property {
+ GET_LEVEL,
+ GET_FREQ,
+ GET_MAXL,
+};
+
+/*
+ * this is the common function to
+ * 1. get maximum cpu cooling states
+ * 2. translate frequency to cooling state
+ * 3. translate cooling state to frequency
+ * Note that the code may be not in good shape
+ * but it is written in this way in order to:
+ * a) reduce duplicate code as most of the code can be shared.
+ * b) make sure the logic is consistent when translating between
+ * cooling states and frequencies.
+*/
+static int get_property(unsigned int cpu, unsigned long input,
+ unsigned int* output, enum cpufreq_cooling_property property)
+{
+ int i, j;
+ unsigned long max_level = 0, level;
+ unsigned int freq = CPUFREQ_ENTRY_INVALID;
+ int descend = -1;
+ struct cpufreq_frequency_table *table =
+ cpufreq_frequency_get_table(cpu);
+
+ if (!output)
+ return -EINVAL;
+
+ if (!table)
+ return -EINVAL;
+
+
+ for (i = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ /* ignore invalid entries */
+ if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ /* ignore duplicate entry */
+ if (freq == table[i].frequency)
+ continue;
+
+ /* get the frequency order */
+ if (freq != CPUFREQ_ENTRY_INVALID && descend != -1)
+ descend = !!(freq > table[i].frequency);
+
+ freq = table[i].frequency;
+ max_level++;
+ }
+
+ /* get max level */
+ if (property == GET_MAXL) {
+ *output = (unsigned int)max_level;
+ return 0;
+ }
+
+ if (property == GET_FREQ)
+ level = descend ? input : (max_level - input -1);
+
+
+ for (i = 0, j = 0; table[i].frequency != CPUFREQ_TABLE_END; i++) {
+ /* ignore invalid entry */
+ if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
+ continue;
+
+ /* ignore duplicate entry */
+ if (freq == table[i].frequency)
+ continue;
+
+ /* now we have a valid frequency entry */
+ freq = table[i].frequency;
+
+ if (property == GET_LEVEL && (unsigned int)input == freq) {
+ /* get level by frequency */
+ *output = descend ? j : (max_level - j - 1);
+ return 0;
+ }
+ if (property == GET_FREQ && level == j) {
+ /* get frequency by level */
+ *output = freq;
+ return 0;
+ }
+ j++;
+ }
+ return -EINVAL;
+}
+
+unsigned long cpufreq_cooling_get_level(unsigned int cpu, unsigned int freq)
+{
+ unsigned int val;
+
+ if (get_property(cpu, (unsigned long)freq, &val, GET_LEVEL))
+ return THERMAL_CSTATE_INVALID;
+ return (unsigned long)val;
+}
+
+EXPORT_SYMBOL(cpufreq_cooling_get_level);
+
/**
* get_cpu_frequency - get the absolute value of frequency from level.
* @cpu: cpu for which frequency is fetched.
@@ -116,46 +215,13 @@
*/
static unsigned int get_cpu_frequency(unsigned int cpu, unsigned long level)
{
- int ret = 0, i = 0;
- unsigned long level_index;
- bool descend = false;
- struct cpufreq_frequency_table *table =
- cpufreq_frequency_get_table(cpu);
- if (!table)
- return ret;
+ int ret = 0;
+ unsigned int freq;
- while (table[i].frequency != CPUFREQ_TABLE_END) {
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
-
- /*check if table in ascending or descending order*/
- if ((table[i + 1].frequency != CPUFREQ_TABLE_END) &&
- (table[i + 1].frequency < table[i].frequency)
- && !descend) {
- descend = true;
- }
-
- /*return if level matched and table in descending order*/
- if (descend && i == level)
- return table[i].frequency;
- i++;
- }
- i--;
-
- if (level > i || descend)
- return ret;
- level_index = i - level;
-
- /*Scan the table in reverse order and match the level*/
- while (i >= 0) {
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
- /*return if level matched*/
- if (i == level_index)
- return table[i].frequency;
- i--;
- }
- return ret;
+ ret = get_property(cpu, level, &freq, GET_FREQ);
+ if (ret)
+ return 0;
+ return freq;
}
/**
@@ -168,8 +234,8 @@
unsigned long cooling_state)
{
unsigned int cpuid, clip_freq;
- struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
- unsigned int cpu = cpumask_any(maskPtr);
+ struct cpumask *mask = &cpufreq_device->allowed_cpus;
+ unsigned int cpu = cpumask_any(mask);
/* Check if the old cooling action is same as new cooling action */
@@ -184,7 +250,7 @@
cpufreq_device->cpufreq_val = clip_freq;
notify_device = cpufreq_device;
- for_each_cpu(cpuid, maskPtr) {
+ for_each_cpu(cpuid, mask) {
if (is_cpufreq_valid(cpuid))
cpufreq_update_policy(cpuid);
}
@@ -235,31 +301,19 @@
unsigned long *state)
{
struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
- struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
+ struct cpumask *mask = &cpufreq_device->allowed_cpus;
unsigned int cpu;
- struct cpufreq_frequency_table *table;
- unsigned long count = 0;
- int i = 0;
+ unsigned int count = 0;
+ int ret;
- cpu = cpumask_any(maskPtr);
- table = cpufreq_frequency_get_table(cpu);
- if (!table) {
- *state = 0;
- return 0;
- }
+ cpu = cpumask_any(mask);
- for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
- count++;
- }
+ ret = get_property(cpu, 0, &count, GET_MAXL);
- if (count > 0) {
- *state = --count;
- return 0;
- }
+ if (count > 0)
+ *state = count;
- return -EINVAL;
+ return ret;
}
/**
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index 61ce60a..1e3b3bf 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -419,7 +419,8 @@
low_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_LOW");
if (low_irq < 0) {
dev_err(&pdev->dev, "Get IRQ_HOTMON_LOW failed.\n");
- return low_irq;
+ ret = low_irq;
+ goto out_unlock;
}
ret = devm_request_threaded_irq(&pdev->dev, low_irq, NULL,
@@ -427,13 +428,14 @@
"dbx500_temp_low", pzone);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to allocate temp low irq.\n");
- return ret;
+ goto out_unlock;
}
high_irq = platform_get_irq_byname(pdev, "IRQ_HOTMON_HIGH");
if (high_irq < 0) {
dev_err(&pdev->dev, "Get IRQ_HOTMON_HIGH failed.\n");
- return high_irq;
+ ret = high_irq;
+ goto out_unlock;
}
ret = devm_request_threaded_irq(&pdev->dev, high_irq, NULL,
@@ -441,15 +443,16 @@
"dbx500_temp_high", pzone);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to allocate temp high irq.\n");
- return ret;
+ goto out_unlock;
}
pzone->therm_dev = thermal_zone_device_register("db8500_thermal_zone",
ptrips->num_trips, 0, pzone, &thdev_ops, NULL, 0, 0);
- if (IS_ERR_OR_NULL(pzone->therm_dev)) {
+ if (IS_ERR(pzone->therm_dev)) {
dev_err(&pdev->dev, "Register thermal zone device failed.\n");
- return PTR_ERR(pzone->therm_dev);
+ ret = PTR_ERR(pzone->therm_dev);
+ goto out_unlock;
}
dev_info(&pdev->dev, "Thermal zone device registered.\n");
@@ -461,9 +464,11 @@
platform_set_drvdata(pdev, pzone);
pzone->mode = THERMAL_DEVICE_ENABLED;
+
+out_unlock:
mutex_unlock(&pzone->th_lock);
- return 0;
+ return ret;
}
static int db8500_thermal_remove(struct platform_device *pdev)
diff --git a/drivers/thermal/dove_thermal.c b/drivers/thermal/dove_thermal.c
index 3078c40..4b15a5f 100644
--- a/drivers/thermal/dove_thermal.c
+++ b/drivers/thermal/dove_thermal.c
@@ -107,12 +107,13 @@
}
/*
- * Calculate temperature. See Section 8.10.1 of 88AP510,
- * Documentation/arm/Marvell/README
+ * Calculate temperature. According to Marvell internal
+ * documentation the formula for this is:
+ * Celsius = (322-reg)/1.3625
*/
reg = readl_relaxed(priv->sensor);
reg = (reg >> DOVE_THERMAL_TEMP_OFFSET) & DOVE_THERMAL_TEMP_MASK;
- *temp = ((2281638UL - (7298*reg)) / 10);
+ *temp = ((3220000000UL - (10000000UL * reg)) / 13625);
return 0;
}
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index 3d6e32a..d20ce9e 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -39,8 +39,6 @@
#include <linux/cpu_cooling.h>
#include <linux/of.h>
-#include <plat/cpu.h>
-
/* Exynos generic registers */
#define EXYNOS_TMU_REG_TRIMINFO 0x0
#define EXYNOS_TMU_REG_CONTROL 0x20
@@ -100,13 +98,13 @@
#define IDLE_INTERVAL 10000
#define MCELSIUS 1000
-#ifdef CONFIG_EXYNOS_THERMAL_EMUL
+#ifdef CONFIG_THERMAL_EMULATION
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_SHIFT 16
#define EXYNOS_EMUL_DATA_SHIFT 8
#define EXYNOS_EMUL_DATA_MASK 0xFF
#define EXYNOS_EMUL_ENABLE 0x1
-#endif /* CONFIG_EXYNOS_THERMAL_EMUL */
+#endif /* CONFIG_THERMAL_EMULATION */
/* CPU Zone information */
#define PANIC_ZONE 4
@@ -145,6 +143,7 @@
struct thermal_sensor_conf {
char name[SENSOR_NAME_LEN];
int (*read_temperature)(void *data);
+ int (*write_emul_temp)(void *drv_data, unsigned long temp);
struct thermal_trip_point_conf trip_data;
struct thermal_cooling_conf cooling_data;
void *private_data;
@@ -242,26 +241,6 @@
return ret;
}
-static int exynos_get_frequency_level(unsigned int cpu, unsigned int freq)
-{
- int i = 0, ret = -EINVAL;
- struct cpufreq_frequency_table *table = NULL;
-#ifdef CONFIG_CPU_FREQ
- table = cpufreq_frequency_get_table(cpu);
-#endif
- if (!table)
- return ret;
-
- while (table[i].frequency != CPUFREQ_TABLE_END) {
- if (table[i].frequency == CPUFREQ_ENTRY_INVALID)
- continue;
- if (table[i].frequency == freq)
- return i;
- i++;
- }
- return ret;
-}
-
/* Bind callback functions for thermal zone */
static int exynos_bind(struct thermal_zone_device *thermal,
struct thermal_cooling_device *cdev)
@@ -288,8 +267,8 @@
/* Bind the thermal zone to the cpufreq cooling device */
for (i = 0; i < tab_size; i++) {
clip_data = (struct freq_clip_table *)&(tab_ptr[i]);
- level = exynos_get_frequency_level(0, clip_data->freq_clip_max);
- if (level < 0)
+ level = cpufreq_cooling_get_level(0, clip_data->freq_clip_max);
+ if (level == THERMAL_CSTATE_INVALID)
return 0;
switch (GET_ZONE(i)) {
case MONITOR_ZONE:
@@ -369,6 +348,23 @@
return 0;
}
+/* Get temperature callback functions for thermal zone */
+static int exynos_set_emul_temp(struct thermal_zone_device *thermal,
+ unsigned long temp)
+{
+ void *data;
+ int ret = -EINVAL;
+
+ if (!th_zone->sensor_conf) {
+ pr_info("Temperature sensor not initialised\n");
+ return -EINVAL;
+ }
+ data = th_zone->sensor_conf->private_data;
+ if (th_zone->sensor_conf->write_emul_temp)
+ ret = th_zone->sensor_conf->write_emul_temp(data, temp);
+ return ret;
+}
+
/* Get the temperature trend */
static int exynos_get_trend(struct thermal_zone_device *thermal,
int trip, enum thermal_trend *trend)
@@ -392,6 +388,7 @@
.bind = exynos_bind,
.unbind = exynos_unbind,
.get_temp = exynos_get_temp,
+ .set_emul_temp = exynos_set_emul_temp,
.get_trend = exynos_get_trend,
.get_mode = exynos_get_mode,
.set_mode = exynos_set_mode,
@@ -714,6 +711,47 @@
return temp;
}
+#ifdef CONFIG_THERMAL_EMULATION
+static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
+{
+ struct exynos_tmu_data *data = drv_data;
+ unsigned int reg;
+ int ret = -EINVAL;
+
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ goto out;
+
+ if (temp && temp < MCELSIUS)
+ goto out;
+
+ mutex_lock(&data->lock);
+ clk_enable(data->clk);
+
+ reg = readl(data->base + EXYNOS_EMUL_CON);
+
+ if (temp) {
+ temp /= MCELSIUS;
+
+ reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
+ (temp_to_code(data, temp)
+ << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
+ } else {
+ reg &= ~EXYNOS_EMUL_ENABLE;
+ }
+
+ writel(reg, data->base + EXYNOS_EMUL_CON);
+
+ clk_disable(data->clk);
+ mutex_unlock(&data->lock);
+ return 0;
+out:
+ return ret;
+}
+#else
+static int exynos_tmu_set_emulation(void *drv_data, unsigned long temp)
+ { return -EINVAL; }
+#endif/*CONFIG_THERMAL_EMULATION*/
+
static void exynos_tmu_work(struct work_struct *work)
{
struct exynos_tmu_data *data = container_of(work,
@@ -747,6 +785,7 @@
static struct thermal_sensor_conf exynos_sensor_conf = {
.name = "exynos-therm",
.read_temperature = (int (*)(void *))exynos_tmu_read,
+ .write_emul_temp = exynos_tmu_set_emulation,
};
#if defined(CONFIG_CPU_EXYNOS4210)
@@ -857,93 +896,6 @@
platform_get_device_id(pdev)->driver_data;
}
-#ifdef CONFIG_EXYNOS_THERMAL_EMUL
-static ssize_t exynos_tmu_emulation_show(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- unsigned int reg;
- u8 temp_code;
- int temp = 0;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- goto out;
-
- mutex_lock(&data->lock);
- clk_enable(data->clk);
- reg = readl(data->base + EXYNOS_EMUL_CON);
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
-
- if (reg & EXYNOS_EMUL_ENABLE) {
- reg >>= EXYNOS_EMUL_DATA_SHIFT;
- temp_code = reg & EXYNOS_EMUL_DATA_MASK;
- temp = code_to_temp(data, temp_code);
- }
-out:
- return sprintf(buf, "%d\n", temp * MCELSIUS);
-}
-
-static ssize_t exynos_tmu_emulation_store(struct device *dev,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct platform_device *pdev = container_of(dev,
- struct platform_device, dev);
- struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- unsigned int reg;
- int temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- goto out;
-
- if (!sscanf(buf, "%d\n", &temp) || temp < 0)
- return -EINVAL;
-
- mutex_lock(&data->lock);
- clk_enable(data->clk);
-
- reg = readl(data->base + EXYNOS_EMUL_CON);
-
- if (temp) {
- /* Both CELSIUS and MCELSIUS type are available for input */
- if (temp > MCELSIUS)
- temp /= MCELSIUS;
-
- reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
- (temp_to_code(data, (temp / MCELSIUS))
- << EXYNOS_EMUL_DATA_SHIFT) | EXYNOS_EMUL_ENABLE;
- } else {
- reg &= ~EXYNOS_EMUL_ENABLE;
- }
-
- writel(reg, data->base + EXYNOS_EMUL_CON);
-
- clk_disable(data->clk);
- mutex_unlock(&data->lock);
-
-out:
- return count;
-}
-
-static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show,
- exynos_tmu_emulation_store);
-static int create_emulation_sysfs(struct device *dev)
-{
- return device_create_file(dev, &dev_attr_emulation);
-}
-static void remove_emulation_sysfs(struct device *dev)
-{
- device_remove_file(dev, &dev_attr_emulation);
-}
-#else
-static inline int create_emulation_sysfs(struct device *dev) { return 0; }
-static inline void remove_emulation_sysfs(struct device *dev) {}
-#endif
-
static int exynos_tmu_probe(struct platform_device *pdev)
{
struct exynos_tmu_data *data;
@@ -1047,10 +999,6 @@
goto err_clk;
}
- ret = create_emulation_sysfs(&pdev->dev);
- if (ret)
- dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n");
-
return 0;
err_clk:
platform_set_drvdata(pdev, NULL);
@@ -1062,8 +1010,6 @@
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
- remove_emulation_sysfs(&pdev->dev);
-
exynos_tmu_control(pdev, false);
exynos_unregister_thermal();
diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c
index 792479f..944ba2f 100644
--- a/drivers/thermal/fair_share.c
+++ b/drivers/thermal/fair_share.c
@@ -22,9 +22,6 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
#include <linux/thermal.h>
#include "thermal_core.h"
@@ -111,23 +108,15 @@
static struct thermal_governor thermal_gov_fair_share = {
.name = "fair_share",
.throttle = fair_share_throttle,
- .owner = THIS_MODULE,
};
-static int __init thermal_gov_fair_share_init(void)
+int thermal_gov_fair_share_register(void)
{
return thermal_register_governor(&thermal_gov_fair_share);
}
-static void __exit thermal_gov_fair_share_exit(void)
+void thermal_gov_fair_share_unregister(void)
{
thermal_unregister_governor(&thermal_gov_fair_share);
}
-/* This should load after thermal framework */
-fs_initcall(thermal_gov_fair_share_init);
-module_exit(thermal_gov_fair_share_exit);
-
-MODULE_AUTHOR("Durgadoss R");
-MODULE_DESCRIPTION("A simple weight based thermal throttling governor");
-MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
index e5500ed..dfeceaf 100644
--- a/drivers/thermal/kirkwood_thermal.c
+++ b/drivers/thermal/kirkwood_thermal.c
@@ -41,21 +41,21 @@
reg = readl_relaxed(priv->sensor);
/* Valid check */
- if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
- KIRKWOOD_THERMAL_VALID_MASK) {
+ if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
+ KIRKWOOD_THERMAL_VALID_MASK)) {
dev_err(&thermal->device,
"Temperature sensor reading not valid\n");
return -EIO;
}
/*
- * Calculate temperature. See Section 8.10.1 of the 88AP510,
- * datasheet, which has the same sensor.
- * Documentation/arm/Marvell/README
+ * Calculate temperature. According to Marvell internal
+ * documentation the formula for this is:
+ * Celsius = (322-reg)/1.3625
*/
reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
KIRKWOOD_THERMAL_TEMP_MASK;
- *temp = ((2281638UL - (7298*reg)) / 10);
+ *temp = ((3220000000UL - (10000000UL * reg)) / 13625);
return 0;
}
diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index 2cc5b61..8d7edd4 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -24,6 +24,7 @@
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -377,6 +378,9 @@
spin_lock_init(&common->lock);
common->dev = dev;
+ pm_runtime_enable(dev);
+ pm_runtime_get_sync(dev);
+
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (irq) {
int ret;
@@ -419,12 +423,15 @@
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(dev, "Could not allocate priv\n");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto error_unregister;
}
priv->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
+ if (IS_ERR(priv->base)) {
+ ret = PTR_ERR(priv->base);
+ goto error_unregister;
+ }
priv->common = common;
priv->id = i;
@@ -443,10 +450,10 @@
goto error_unregister;
}
- list_move_tail(&priv->list, &common->head);
-
if (rcar_has_irq_support(priv))
rcar_thermal_irq_enable(priv);
+
+ list_move_tail(&priv->list, &common->head);
}
platform_set_drvdata(pdev, common);
@@ -456,8 +463,14 @@
return 0;
error_unregister:
- rcar_thermal_for_each_priv(priv, common)
+ rcar_thermal_for_each_priv(priv, common) {
thermal_zone_device_unregister(priv->zone);
+ if (rcar_has_irq_support(priv))
+ rcar_thermal_irq_disable(priv);
+ }
+
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
return ret;
}
@@ -465,13 +478,20 @@
static int rcar_thermal_remove(struct platform_device *pdev)
{
struct rcar_thermal_common *common = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
struct rcar_thermal_priv *priv;
- rcar_thermal_for_each_priv(priv, common)
+ rcar_thermal_for_each_priv(priv, common) {
thermal_zone_device_unregister(priv->zone);
+ if (rcar_has_irq_support(priv))
+ rcar_thermal_irq_disable(priv);
+ }
platform_set_drvdata(pdev, NULL);
+ pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
+
return 0;
}
diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c
index 407cde3..4d4ddae 100644
--- a/drivers/thermal/step_wise.c
+++ b/drivers/thermal/step_wise.c
@@ -22,9 +22,6 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
#include <linux/thermal.h>
#include "thermal_core.h"
@@ -59,9 +56,12 @@
switch (trend) {
case THERMAL_TREND_RAISING:
- if (throttle)
+ if (throttle) {
cur_state = cur_state < instance->upper ?
(cur_state + 1) : instance->upper;
+ if (cur_state < instance->lower)
+ cur_state = instance->lower;
+ }
break;
case THERMAL_TREND_RAISE_FULL:
if (throttle)
@@ -71,8 +71,11 @@
if (cur_state == instance->lower) {
if (!throttle)
cur_state = -1;
- } else
+ } else {
cur_state -= 1;
+ if (cur_state > instance->upper)
+ cur_state = instance->upper;
+ }
break;
case THERMAL_TREND_DROP_FULL:
if (cur_state == instance->lower) {
@@ -180,23 +183,14 @@
static struct thermal_governor thermal_gov_step_wise = {
.name = "step_wise",
.throttle = step_wise_throttle,
- .owner = THIS_MODULE,
};
-static int __init thermal_gov_step_wise_init(void)
+int thermal_gov_step_wise_register(void)
{
return thermal_register_governor(&thermal_gov_step_wise);
}
-static void __exit thermal_gov_step_wise_exit(void)
+void thermal_gov_step_wise_unregister(void)
{
thermal_unregister_governor(&thermal_gov_step_wise);
}
-
-/* This should load after thermal framework */
-fs_initcall(thermal_gov_step_wise_init);
-module_exit(thermal_gov_step_wise_exit);
-
-MODULE_AUTHOR("Durgadoss R");
-MODULE_DESCRIPTION("A step-by-step thermal throttling governor");
-MODULE_LICENSE("GPL");
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_core.c
similarity index 94%
rename from drivers/thermal/thermal_sys.c
rename to drivers/thermal/thermal_core.c
index 5b7863a..c0779ad 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_core.c
@@ -99,7 +99,6 @@
return err;
}
-EXPORT_SYMBOL_GPL(thermal_register_governor);
void thermal_unregister_governor(struct thermal_governor *governor)
{
@@ -127,7 +126,6 @@
mutex_unlock(&thermal_governor_lock);
return;
}
-EXPORT_SYMBOL_GPL(thermal_unregister_governor);
static int get_idr(struct idr *idr, struct mutex *lock, int *id)
{
@@ -371,16 +369,28 @@
monitor_thermal_zone(tz);
}
-static int thermal_zone_get_temp(struct thermal_zone_device *tz,
- unsigned long *temp)
+/**
+ * thermal_zone_get_temp() - returns its the temperature of thermal zone
+ * @tz: a valid pointer to a struct thermal_zone_device
+ * @temp: a valid pointer to where to store the resulting temperature.
+ *
+ * When a valid thermal zone reference is passed, it will fetch its
+ * temperature and fill @temp.
+ *
+ * Return: On success returns 0, an error code otherwise
+ */
+int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp)
{
- int ret = 0;
+ int ret = -EINVAL;
#ifdef CONFIG_THERMAL_EMULATION
int count;
unsigned long crit_temp = -1UL;
enum thermal_trip_type type;
#endif
+ if (IS_ERR_OR_NULL(tz))
+ goto exit;
+
mutex_lock(&tz->lock);
ret = tz->ops->get_temp(tz, temp);
@@ -404,8 +414,10 @@
skip_emul:
#endif
mutex_unlock(&tz->lock);
+exit:
return ret;
}
+EXPORT_SYMBOL_GPL(thermal_zone_get_temp);
static void update_temperature(struct thermal_zone_device *tz)
{
@@ -1756,6 +1768,44 @@
}
EXPORT_SYMBOL(thermal_zone_device_unregister);
+/**
+ * thermal_zone_get_zone_by_name() - search for a zone and returns its ref
+ * @name: thermal zone name to fetch the temperature
+ *
+ * When only one zone is found with the passed name, returns a reference to it.
+ *
+ * Return: On success returns a reference to an unique thermal zone with
+ * matching name equals to @name, an ERR_PTR otherwise (-EINVAL for invalid
+ * paramenters, -ENODEV for not found and -EEXIST for multiple matches).
+ */
+struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name)
+{
+ struct thermal_zone_device *pos = NULL, *ref = ERR_PTR(-EINVAL);
+ unsigned int found = 0;
+
+ if (!name)
+ goto exit;
+
+ mutex_lock(&thermal_list_lock);
+ list_for_each_entry(pos, &thermal_tz_list, node)
+ if (!strnicmp(name, pos->type, THERMAL_NAME_LENGTH)) {
+ found++;
+ ref = pos;
+ }
+ mutex_unlock(&thermal_list_lock);
+
+ /* nothing has been found, thus an error code for it */
+ if (found == 0)
+ ref = ERR_PTR(-ENODEV);
+ else if (found > 1)
+ /* Success only when an unique zone is found */
+ ref = ERR_PTR(-EEXIST);
+
+exit:
+ return ref;
+}
+EXPORT_SYMBOL_GPL(thermal_zone_get_zone_by_name);
+
#ifdef CONFIG_NET
static struct genl_family thermal_event_genl_family = {
.id = GENL_ID_GENERATE,
@@ -1858,30 +1908,69 @@
static inline void genetlink_exit(void) {}
#endif /* !CONFIG_NET */
+static int __init thermal_register_governors(void)
+{
+ int result;
+
+ result = thermal_gov_step_wise_register();
+ if (result)
+ return result;
+
+ result = thermal_gov_fair_share_register();
+ if (result)
+ return result;
+
+ return thermal_gov_user_space_register();
+}
+
+static void thermal_unregister_governors(void)
+{
+ thermal_gov_step_wise_unregister();
+ thermal_gov_fair_share_unregister();
+ thermal_gov_user_space_unregister();
+}
+
static int __init thermal_init(void)
{
- int result = 0;
+ int result;
+
+ result = thermal_register_governors();
+ if (result)
+ goto error;
result = class_register(&thermal_class);
- if (result) {
- idr_destroy(&thermal_tz_idr);
- idr_destroy(&thermal_cdev_idr);
- mutex_destroy(&thermal_idr_lock);
- mutex_destroy(&thermal_list_lock);
- return result;
- }
+ if (result)
+ goto unregister_governors;
+
result = genetlink_init();
+ if (result)
+ goto unregister_class;
+
+ return 0;
+
+unregister_governors:
+ thermal_unregister_governors();
+unregister_class:
+ class_unregister(&thermal_class);
+error:
+ idr_destroy(&thermal_tz_idr);
+ idr_destroy(&thermal_cdev_idr);
+ mutex_destroy(&thermal_idr_lock);
+ mutex_destroy(&thermal_list_lock);
+ mutex_destroy(&thermal_governor_lock);
return result;
}
static void __exit thermal_exit(void)
{
+ genetlink_exit();
class_unregister(&thermal_class);
+ thermal_unregister_governors();
idr_destroy(&thermal_tz_idr);
idr_destroy(&thermal_cdev_idr);
mutex_destroy(&thermal_idr_lock);
mutex_destroy(&thermal_list_lock);
- genetlink_exit();
+ mutex_destroy(&thermal_governor_lock);
}
fs_initcall(thermal_init);
diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h
index 0d3205a..7cf2f66 100644
--- a/drivers/thermal/thermal_core.h
+++ b/drivers/thermal/thermal_core.h
@@ -50,4 +50,31 @@
struct list_head cdev_node; /* node in cdev->thermal_instances */
};
+int thermal_register_governor(struct thermal_governor *);
+void thermal_unregister_governor(struct thermal_governor *);
+
+#ifdef CONFIG_THERMAL_GOV_STEP_WISE
+int thermal_gov_step_wise_register(void);
+void thermal_gov_step_wise_unregister(void);
+#else
+static inline int thermal_gov_step_wise_register(void) { return 0; }
+static inline void thermal_gov_step_wise_unregister(void) {}
+#endif /* CONFIG_THERMAL_GOV_STEP_WISE */
+
+#ifdef CONFIG_THERMAL_GOV_FAIR_SHARE
+int thermal_gov_fair_share_register(void);
+void thermal_gov_fair_share_unregister(void);
+#else
+static inline int thermal_gov_fair_share_register(void) { return 0; }
+static inline void thermal_gov_fair_share_unregister(void) {}
+#endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */
+
+#ifdef CONFIG_THERMAL_GOV_USER_SPACE
+int thermal_gov_user_space_register(void);
+void thermal_gov_user_space_unregister(void);
+#else
+static inline int thermal_gov_user_space_register(void) { return 0; }
+static inline void thermal_gov_user_space_unregister(void) {}
+#endif /* CONFIG_THERMAL_GOV_USER_SPACE */
+
#endif /* __THERMAL_CORE_H__ */
diff --git a/drivers/thermal/user_space.c b/drivers/thermal/user_space.c
index 6bbb380..10adcdd 100644
--- a/drivers/thermal/user_space.c
+++ b/drivers/thermal/user_space.c
@@ -22,9 +22,6 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
#include <linux/thermal.h>
#include "thermal_core.h"
@@ -46,23 +43,15 @@
static struct thermal_governor thermal_gov_user_space = {
.name = "user_space",
.throttle = notify_user_space,
- .owner = THIS_MODULE,
};
-static int __init thermal_gov_user_space_init(void)
+int thermal_gov_user_space_register(void)
{
return thermal_register_governor(&thermal_gov_user_space);
}
-static void __exit thermal_gov_user_space_exit(void)
+void thermal_gov_user_space_unregister(void)
{
thermal_unregister_governor(&thermal_gov_user_space);
}
-/* This should load after thermal framework */
-fs_initcall(thermal_gov_user_space_init);
-module_exit(thermal_gov_user_space_exit);
-
-MODULE_AUTHOR("Durgadoss R");
-MODULE_DESCRIPTION("A user space Thermal notifier");
-MODULE_LICENSE("GPL");
diff --git a/include/linux/cpu_cooling.h b/include/linux/cpu_cooling.h
index 40b4ef5..77c87c9 100644
--- a/include/linux/cpu_cooling.h
+++ b/include/linux/cpu_cooling.h
@@ -29,7 +29,7 @@
#define CPUFREQ_COOLING_START 0
#define CPUFREQ_COOLING_STOP 1
-#if defined(CONFIG_CPU_THERMAL) || defined(CONFIG_CPU_THERMAL_MODULE)
+#ifdef CONFIG_CPU_THERMAL
/**
* cpufreq_cooling_register - function to create cpufreq cooling device.
* @clip_cpus: cpumask of cpus where the frequency constraints will happen
@@ -42,6 +42,8 @@
* @cdev: thermal cooling device pointer.
*/
void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev);
+
+unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int);
#else /* !CONFIG_CPU_THERMAL */
static inline struct thermal_cooling_device *cpufreq_cooling_register(
const struct cpumask *clip_cpus)
@@ -53,6 +55,11 @@
{
return;
}
+static inline unsigned long cpufreq_cooling_get_level(unsigned int,
+ unsigned int)
+{
+ return THERMAL_CSTATE_INVALID;
+}
#endif /* CONFIG_CPU_THERMAL */
#endif /* __CPU_COOLING_H__ */
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index f0bd7f9..ec2b886 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -33,8 +33,11 @@
#define THERMAL_MAX_TRIPS 12
#define THERMAL_NAME_LENGTH 20
+/* invalid cooling state */
+#define THERMAL_CSTATE_INVALID -1UL
+
/* No upper/lower limit requirement */
-#define THERMAL_NO_LIMIT -1UL
+#define THERMAL_NO_LIMIT THERMAL_CSTATE_INVALID
/* Unit conversion macros */
#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \
@@ -184,7 +187,6 @@
char name[THERMAL_NAME_LENGTH];
int (*throttle)(struct thermal_zone_device *tz, int trip);
struct list_head governor_list;
- struct module *owner;
};
/* Structure that holds binding parameters for a zone */
@@ -237,6 +239,8 @@
struct thermal_cooling_device *thermal_cooling_device_register(char *, void *,
const struct thermal_cooling_device_ops *);
void thermal_cooling_device_unregister(struct thermal_cooling_device *);
+struct thermal_zone_device *thermal_zone_get_zone_by_name(const char *name);
+int thermal_zone_get_temp(struct thermal_zone_device *tz, unsigned long *temp);
int get_tz_trend(struct thermal_zone_device *, int);
struct thermal_instance *get_thermal_instance(struct thermal_zone_device *,
@@ -244,14 +248,11 @@
void thermal_cdev_update(struct thermal_cooling_device *);
void notify_thermal_framework(struct thermal_zone_device *, int);
-int thermal_register_governor(struct thermal_governor *);
-void thermal_unregister_governor(struct thermal_governor *);
-
#ifdef CONFIG_NET
extern int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event);
#else
-static int thermal_generate_netlink_event(struct thermal_zone_device *tz,
+static inline int thermal_generate_netlink_event(struct thermal_zone_device *tz,
enum events event)
{
return 0;