lapb: Neaten debugging

Enable dynamic debugging and remove a bunch of #ifdef/#endifs.

Add a lapb_dbg(level, fmt, ...) macro and replace the
printk(KERN_DEBUG uses.
Add pr_fmt and remove embedded prefixes.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/net/lapb/lapb_in.c b/net/lapb/lapb_in.c
index f4e3c1a..5dba899 100644
--- a/net/lapb/lapb_in.c
+++ b/net/lapb/lapb_in.c
@@ -15,6 +15,8 @@
  *	2000-10-29	Henner Eisen	lapb_data_indication() return status.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/errno.h>
 #include <linux/types.h>
 #include <linux/socket.h>
@@ -44,25 +46,16 @@
 {
 	switch (frame->type) {
 	case LAPB_SABM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S0 RX SABM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S0 RX SABM(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S0 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S0 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S0 -> S3\n", lapb->dev);
-#endif
+			lapb_dbg(1, "(%p) S0 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
+			lapb_dbg(0, "(%p) S0 -> S3\n", lapb->dev);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -78,18 +71,11 @@
 		break;
 
 	case LAPB_SABME:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S0 RX SABME(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S0 RX SABME(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S0 -> S3\n", lapb->dev);
-#endif
+			lapb_dbg(1, "(%p) S0 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
+			lapb_dbg(0, "(%p) S0 -> S3\n", lapb->dev);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -102,22 +88,16 @@
 			lapb->va        = 0;
 			lapb_connect_indication(lapb, LAPB_OK);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S0 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S0 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		}
 		break;
 
 	case LAPB_DISC:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S0 RX DISC(%d)\n",
-		       lapb->dev, frame->pf);
-		printk(KERN_DEBUG "lapb: (%p) S0 TX UA(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S0 RX DISC(%d)\n", lapb->dev, frame->pf);
+		lapb_dbg(1, "(%p) S0 TX UA(%d)\n", lapb->dev, frame->pf);
 		lapb_send_control(lapb, LAPB_UA, frame->pf, LAPB_RESPONSE);
 		break;
 
@@ -137,68 +117,45 @@
 {
 	switch (frame->type) {
 	case LAPB_SABM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S1 RX SABM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S1 RX SABM(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S1 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S1 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S1 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 		}
 		break;
 
 	case LAPB_SABME:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S1 RX SABME(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S1 RX SABME(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S1 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S1 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S1 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		}
 		break;
 
 	case LAPB_DISC:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S1 RX DISC(%d)\n",
-		       lapb->dev, frame->pf);
-		printk(KERN_DEBUG "lapb: (%p) S1 TX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S1 RX DISC(%d)\n", lapb->dev, frame->pf);
+		lapb_dbg(1, "(%p) S1 TX DM(%d)\n", lapb->dev, frame->pf);
 		lapb_send_control(lapb, LAPB_DM, frame->pf, LAPB_RESPONSE);
 		break;
 
 	case LAPB_UA:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S1 RX UA(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S1 RX UA(%d)\n", lapb->dev, frame->pf);
 		if (frame->pf) {
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S1 -> S3\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S1 -> S3\n", lapb->dev);
 			lapb_stop_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
 			lapb->state     = LAPB_STATE_3;
@@ -212,14 +169,9 @@
 		break;
 
 	case LAPB_DM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S1 RX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S1 RX DM(%d)\n", lapb->dev, frame->pf);
 		if (frame->pf) {
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S1 -> S0\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S1 -> S0\n", lapb->dev);
 			lapb_clear_queues(lapb);
 			lapb->state = LAPB_STATE_0;
 			lapb_start_t1timer(lapb);
@@ -242,34 +194,22 @@
 	switch (frame->type) {
 	case LAPB_SABM:
 	case LAPB_SABME:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S2 RX {SABM,SABME}(%d)\n",
-		       lapb->dev, frame->pf);
-		printk(KERN_DEBUG "lapb: (%p) S2 TX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S2 RX {SABM,SABME}(%d)\n",
+			 lapb->dev, frame->pf);
+		lapb_dbg(1, "(%p) S2 TX DM(%d)\n", lapb->dev, frame->pf);
 		lapb_send_control(lapb, LAPB_DM, frame->pf, LAPB_RESPONSE);
 		break;
 
 	case LAPB_DISC:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S2 RX DISC(%d)\n",
-		       lapb->dev, frame->pf);
-		printk(KERN_DEBUG "lapb: (%p) S2 TX UA(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S2 RX DISC(%d)\n", lapb->dev, frame->pf);
+		lapb_dbg(1, "(%p) S2 TX UA(%d)\n", lapb->dev, frame->pf);
 		lapb_send_control(lapb, LAPB_UA, frame->pf, LAPB_RESPONSE);
 		break;
 
 	case LAPB_UA:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S2 RX UA(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S2 RX UA(%d)\n", lapb->dev, frame->pf);
 		if (frame->pf) {
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S2 -> S0\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S2 -> S0\n", lapb->dev);
 			lapb->state = LAPB_STATE_0;
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
@@ -278,14 +218,9 @@
 		break;
 
 	case LAPB_DM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S2 RX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S2 RX DM(%d)\n", lapb->dev, frame->pf);
 		if (frame->pf) {
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S2 -> S0\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S2 -> S0\n", lapb->dev);
 			lapb->state = LAPB_STATE_0;
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
@@ -297,12 +232,9 @@
 	case LAPB_REJ:
 	case LAPB_RNR:
 	case LAPB_RR:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S2 RX {I,REJ,RNR,RR}(%d)\n",
+		lapb_dbg(1, "(%p) S2 RX {I,REJ,RNR,RR}(%d)\n",
 		       lapb->dev, frame->pf);
-		printk(KERN_DEBUG "lapb: (%p) S2 RX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S2 RX DM(%d)\n", lapb->dev, frame->pf);
 		if (frame->pf)
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
@@ -325,22 +257,15 @@
 
 	switch (frame->type) {
 	case LAPB_SABM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX SABM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S3 RX SABM(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S3 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S3 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S3 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S3 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -355,15 +280,10 @@
 		break;
 
 	case LAPB_SABME:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX SABME(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S3 RX SABME(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S3 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S3 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -375,23 +295,16 @@
 			lapb->va        = 0;
 			lapb_requeue_frames(lapb);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S3 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S3 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		}
 		break;
 
 	case LAPB_DISC:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX DISC(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-		printk(KERN_DEBUG "lapb: (%p) S3 -> S0\n", lapb->dev);
-#endif
+		lapb_dbg(1, "(%p) S3 RX DISC(%d)\n", lapb->dev, frame->pf);
+		lapb_dbg(0, "(%p) S3 -> S0\n", lapb->dev);
 		lapb_clear_queues(lapb);
 		lapb_send_control(lapb, LAPB_UA, frame->pf, LAPB_RESPONSE);
 		lapb_start_t1timer(lapb);
@@ -401,13 +314,8 @@
 		break;
 
 	case LAPB_DM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX DM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-		printk(KERN_DEBUG "lapb: (%p) S3 -> S0\n", lapb->dev);
-#endif
+		lapb_dbg(1, "(%p) S3 RX DM(%d)\n", lapb->dev, frame->pf);
+		lapb_dbg(0, "(%p) S3 -> S0\n", lapb->dev);
 		lapb_clear_queues(lapb);
 		lapb->state = LAPB_STATE_0;
 		lapb_start_t1timer(lapb);
@@ -416,10 +324,8 @@
 		break;
 
 	case LAPB_RNR:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX RNR(%d) R%d\n",
-		       lapb->dev, frame->pf, frame->nr);
-#endif
+		lapb_dbg(1, "(%p) S3 RX RNR(%d) R%d\n",
+			 lapb->dev, frame->pf, frame->nr);
 		lapb->condition |= LAPB_PEER_RX_BUSY_CONDITION;
 		lapb_check_need_response(lapb, frame->cr, frame->pf);
 		if (lapb_validate_nr(lapb, frame->nr)) {
@@ -428,9 +334,7 @@
 			lapb->frmr_data = *frame;
 			lapb->frmr_type = LAPB_FRMR_Z;
 			lapb_transmit_frmr(lapb);
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S3 -> S4\n", lapb->dev);
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
 			lapb->state   = LAPB_STATE_4;
@@ -439,10 +343,8 @@
 		break;
 
 	case LAPB_RR:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX RR(%d) R%d\n",
-		       lapb->dev, frame->pf, frame->nr);
-#endif
+		lapb_dbg(1, "(%p) S3 RX RR(%d) R%d\n",
+			 lapb->dev, frame->pf, frame->nr);
 		lapb->condition &= ~LAPB_PEER_RX_BUSY_CONDITION;
 		lapb_check_need_response(lapb, frame->cr, frame->pf);
 		if (lapb_validate_nr(lapb, frame->nr)) {
@@ -451,9 +353,7 @@
 			lapb->frmr_data = *frame;
 			lapb->frmr_type = LAPB_FRMR_Z;
 			lapb_transmit_frmr(lapb);
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S3 -> S4\n", lapb->dev);
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
 			lapb->state   = LAPB_STATE_4;
@@ -462,10 +362,8 @@
 		break;
 
 	case LAPB_REJ:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX REJ(%d) R%d\n",
-		       lapb->dev, frame->pf, frame->nr);
-#endif
+		lapb_dbg(1, "(%p) S3 RX REJ(%d) R%d\n",
+			 lapb->dev, frame->pf, frame->nr);
 		lapb->condition &= ~LAPB_PEER_RX_BUSY_CONDITION;
 		lapb_check_need_response(lapb, frame->cr, frame->pf);
 		if (lapb_validate_nr(lapb, frame->nr)) {
@@ -477,9 +375,7 @@
 			lapb->frmr_data = *frame;
 			lapb->frmr_type = LAPB_FRMR_Z;
 			lapb_transmit_frmr(lapb);
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S3 -> S4\n", lapb->dev);
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
 			lapb->state   = LAPB_STATE_4;
@@ -488,17 +384,13 @@
 		break;
 
 	case LAPB_I:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX I(%d) S%d R%d\n",
-		       lapb->dev, frame->pf, frame->ns, frame->nr);
-#endif
+		lapb_dbg(1, "(%p) S3 RX I(%d) S%d R%d\n",
+			 lapb->dev, frame->pf, frame->ns, frame->nr);
 		if (!lapb_validate_nr(lapb, frame->nr)) {
 			lapb->frmr_data = *frame;
 			lapb->frmr_type = LAPB_FRMR_Z;
 			lapb_transmit_frmr(lapb);
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
-#endif
+			lapb_dbg(0, "(%p) S3 -> S4\n", lapb->dev);
 			lapb_start_t1timer(lapb);
 			lapb_stop_t2timer(lapb);
 			lapb->state   = LAPB_STATE_4;
@@ -522,7 +414,7 @@
 			 * a frame lost on the wire.
 			 */
 			if (cn == NET_RX_DROP) {
-				printk(KERN_DEBUG "LAPB: rx congestion\n");
+				pr_debug("rx congestion\n");
 				break;
 			}
 			lapb->vr = (lapb->vr + 1) % modulus;
@@ -541,11 +433,8 @@
 				if (frame->pf)
 					lapb_enquiry_response(lapb);
 			} else {
-#if LAPB_DEBUG > 1
-				printk(KERN_DEBUG
-				       "lapb: (%p) S3 TX REJ(%d) R%d\n",
-				       lapb->dev, frame->pf, lapb->vr);
-#endif
+				lapb_dbg(1, "(%p) S3 TX REJ(%d) R%d\n",
+					 lapb->dev, frame->pf, lapb->vr);
 				lapb->condition |= LAPB_REJECT_CONDITION;
 				lapb_send_control(lapb, LAPB_REJ, frame->pf,
 						  LAPB_RESPONSE);
@@ -555,31 +444,22 @@
 		break;
 
 	case LAPB_FRMR:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX FRMR(%d) %02X "
-		       "%02X %02X %02X %02X\n", lapb->dev, frame->pf,
-		       skb->data[0], skb->data[1], skb->data[2],
-		       skb->data[3], skb->data[4]);
-#endif
+		lapb_dbg(1, "(%p) S3 RX FRMR(%d) %02X %02X %02X %02X %02X\n",
+			 lapb->dev, frame->pf,
+			 skb->data[0], skb->data[1], skb->data[2],
+			 skb->data[3], skb->data[4]);
 		lapb_establish_data_link(lapb);
-#if LAPB_DEBUG > 0
-		printk(KERN_DEBUG "lapb: (%p) S3 -> S1\n", lapb->dev);
-#endif
+		lapb_dbg(0, "(%p) S3 -> S1\n", lapb->dev);
 		lapb_requeue_frames(lapb);
 		lapb->state = LAPB_STATE_1;
 		break;
 
 	case LAPB_ILLEGAL:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S3 RX ILLEGAL(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S3 RX ILLEGAL(%d)\n", lapb->dev, frame->pf);
 		lapb->frmr_data = *frame;
 		lapb->frmr_type = LAPB_FRMR_W;
 		lapb_transmit_frmr(lapb);
-#if LAPB_DEBUG > 0
-		printk(KERN_DEBUG "lapb: (%p) S3 -> S4\n", lapb->dev);
-#endif
+		lapb_dbg(0, "(%p) S3 -> S4\n", lapb->dev);
 		lapb_start_t1timer(lapb);
 		lapb_stop_t2timer(lapb);
 		lapb->state   = LAPB_STATE_4;
@@ -600,25 +480,16 @@
 {
 	switch (frame->type) {
 	case LAPB_SABM:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S4 RX SABM(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S4 RX SABM(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S4 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S4 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S4 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S4 -> S3\n", lapb->dev);
-#endif
+			lapb_dbg(1, "(%p) S4 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
+			lapb_dbg(0, "(%p) S4 -> S3\n", lapb->dev);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -634,18 +505,11 @@
 		break;
 
 	case LAPB_SABME:
-#if LAPB_DEBUG > 1
-		printk(KERN_DEBUG "lapb: (%p) S4 RX SABME(%d)\n",
-		       lapb->dev, frame->pf);
-#endif
+		lapb_dbg(1, "(%p) S4 RX SABME(%d)\n", lapb->dev, frame->pf);
 		if (lapb->mode & LAPB_EXTENDED) {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S4 TX UA(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
-#if LAPB_DEBUG > 0
-			printk(KERN_DEBUG "lapb: (%p) S4 -> S3\n", lapb->dev);
-#endif
+			lapb_dbg(1, "(%p) S4 TX UA(%d)\n",
+				 lapb->dev, frame->pf);
+			lapb_dbg(0, "(%p) S4 -> S3\n", lapb->dev);
 			lapb_send_control(lapb, LAPB_UA, frame->pf,
 					  LAPB_RESPONSE);
 			lapb_stop_t1timer(lapb);
@@ -658,10 +522,8 @@
 			lapb->va        = 0;
 			lapb_connect_indication(lapb, LAPB_OK);
 		} else {
-#if LAPB_DEBUG > 1
-			printk(KERN_DEBUG "lapb: (%p) S4 TX DM(%d)\n",
-			       lapb->dev, frame->pf);
-#endif
+			lapb_dbg(1, "(%p) S4 TX DM(%d)\n",
+				 lapb->dev, frame->pf);
 			lapb_send_control(lapb, LAPB_DM, frame->pf,
 					  LAPB_RESPONSE);
 		}