V4L/DVB (4210a): git-dvb versus matroxfb
drivers/video/matrox/matroxfb_base.c: In function 'matroxfb_ioctl':
drivers/video/matrox/matroxfb_base.c:1140: error: 'VIDIOC_S_CTRL_OLD' undeclared (first use in this function)
drivers/video/matrox/matroxfb_base.c:1140: error: (Each undeclared identifier is reported only once drivers/video/matrox/matroxfb_base.c:1140: error: for each function it appears in.)
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/matrox/matroxfb_base.c
index 23c1827..f4ddd34 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/matrox/matroxfb_base.c
@@ -102,6 +102,8 @@
#include <linux/config.h>
#include <linux/version.h>
+#define __OLD_VIDIOC_
+
#include "matroxfb_base.h"
#include "matroxfb_misc.h"
#include "matroxfb_accel.h"
@@ -158,9 +160,9 @@
/* Make sure that displays are compatible */
if (info && (info->fbcon.var.bits_per_pixel == ACCESS_FBINFO(fbcon).var.bits_per_pixel)
- && (info->fbcon.var.xres_virtual == ACCESS_FBINFO(fbcon).var.xres_virtual)
- && (info->fbcon.var.green.length == ACCESS_FBINFO(fbcon).var.green.length)
- ) {
+ && (info->fbcon.var.xres_virtual == ACCESS_FBINFO(fbcon).var.xres_virtual)
+ && (info->fbcon.var.green.length == ACCESS_FBINFO(fbcon).var.green.length)
+ ) {
switch (ACCESS_FBINFO(fbcon).var.bits_per_pixel) {
case 16:
case 32:
@@ -224,7 +226,7 @@
int matroxfb_enable_irq(WPMINFO int reenable) {
u_int32_t bm;
-
+
if (ACCESS_FBINFO(devflags.accelerator) == FB_ACCEL_MATROX_MGAG400)
bm = 0x220;
else
@@ -241,7 +243,7 @@
mga_outl(M_IEN, mga_inl(M_IEN) | bm);
} else if (reenable) {
u_int32_t ien;
-
+
ien = mga_inl(M_IEN);
if ((ien & bm) != bm) {
printk(KERN_DEBUG "matroxfb: someone disabled IRQ [%08X]\n", ien);
@@ -347,7 +349,7 @@
mga_setr(M_EXTVGA_INDEX, 0x00, p2);
}
matroxfb_DAC_unlock_irqrestore(flags);
-
+
update_crtc2(PMINFO pos);
CRITEND
@@ -390,7 +392,7 @@
static int matroxfb_open(struct fb_info *info, int user)
{
MINFO_FROM_INFO(info);
-
+
DBG_LOOP(__FUNCTION__)
if (ACCESS_FBINFO(dead)) {
@@ -406,7 +408,7 @@
static int matroxfb_release(struct fb_info *info, int user)
{
MINFO_FROM_INFO(info);
-
+
DBG_LOOP(__FUNCTION__)
if (user) {
@@ -854,7 +856,7 @@
vblank->flags |= FB_VBLANK_VBLANKING;
if (test_bit(0, &ACCESS_FBINFO(irq_flags))) {
vblank->flags |= FB_VBLANK_HAVE_COUNT;
- /* Only one writer, aligned int value...
+ /* Only one writer, aligned int value...
it should work without lock and without atomic_t */
vblank->count = ACCESS_FBINFO(crtc1).vsync.cnt;
}
@@ -870,7 +872,7 @@
{
void __user *argp = (void __user *)arg;
MINFO_FROM_INFO(info);
-
+
DBG(__FUNCTION__)
if (ACCESS_FBINFO(dead)) {
@@ -1081,7 +1083,7 @@
case VIDIOC_QUERYCAP:
{
struct v4l2_capability r;
-
+
memset(&r, 0, sizeof(r));
strcpy(r.driver, "matroxfb");
strcpy(r.card, "Matrox");
@@ -1091,7 +1093,7 @@
if (copy_to_user(argp, &r, sizeof(r)))
return -EFAULT;
return 0;
-
+
}
case VIDIOC_QUERYCTRL:
{
@@ -1690,8 +1692,8 @@
pci_read_config_dword(ACCESS_FBINFO(pcidev), PCI_COMMAND, &cmd);
mga_option &= 0x7FFFFFFF; /* clear BIG_ENDIAN */
mga_option |= MX_OPTION_BSWAP;
- /* disable palette snooping */
- cmd &= ~PCI_COMMAND_VGA_PALETTE;
+ /* disable palette snooping */
+ cmd &= ~PCI_COMMAND_VGA_PALETTE;
if (pci_dev_present(intel_82437)) {
if (!(mga_option & 0x20000000) && !ACCESS_FBINFO(devflags.nopciretry)) {
printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n");
@@ -1809,12 +1811,12 @@
if (fv) {
tmp = fv * (vesafb_defined.upper_margin + vesafb_defined.yres
- + vesafb_defined.lower_margin + vesafb_defined.vsync_len);
+ + vesafb_defined.lower_margin + vesafb_defined.vsync_len);
if ((tmp < fh) || (fh == 0)) fh = tmp;
}
if (fh) {
tmp = fh * (vesafb_defined.left_margin + vesafb_defined.xres
- + vesafb_defined.right_margin + vesafb_defined.hsync_len);
+ + vesafb_defined.right_margin + vesafb_defined.hsync_len);
if ((tmp < maxclk) || (maxclk == 0)) maxclk = tmp;
}
tmp = (maxclk + 499) / 500;
@@ -1890,14 +1892,14 @@
/* there is no console on this fb... but we have to initialize hardware
* until someone tells me what is proper thing to do */
- if (!ACCESS_FBINFO(initialized)) {
- printk(KERN_INFO "fb%d: initializing hardware\n",
- ACCESS_FBINFO(fbcon.node));
- /* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
- * already before, so register_framebuffer works correctly. */
- vesafb_defined.activate |= FB_ACTIVATE_FORCE;
- fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
- }
+ if (!ACCESS_FBINFO(initialized)) {
+ printk(KERN_INFO "fb%d: initializing hardware\n",
+ ACCESS_FBINFO(fbcon.node));
+ /* We have to use FB_ACTIVATE_FORCE, as we had to put vesafb_defined to the fbcon.var
+ * already before, so register_framebuffer works correctly. */
+ vesafb_defined.activate |= FB_ACTIVATE_FORCE;
+ fb_set_var(&ACCESS_FBINFO(fbcon), &vesafb_defined);
+ }
return 0;
failVideoIO:;
@@ -2356,7 +2358,7 @@
else if (!strncmp(this_opt, "dfp:", 4)) {
dfp_type = simple_strtoul(this_opt+4, NULL, 0);
dfp = 1;
- }
+ }
#ifdef CONFIG_PPC_PMAC
else if (!strncmp(this_opt, "vmode:", 6)) {
unsigned int vmode = simple_strtoul(this_opt+6, NULL, 0);