| /* |
| * Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/msm-clocks-8953.h> |
| |
| &soc { |
| i2c@78b7000 { /* BLSP1 QUP3 */ |
| /delete-node/ synaptics@4b; |
| }; |
| |
| vdd_vreg: vdd_vreg { |
| compatible = "regulator-fixed"; |
| status = "ok"; |
| regulator-name = "vdd_vreg"; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| input-name = "gpio-keys"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&gpio_key_active>; |
| |
| vol_up { |
| label = "volume_up"; |
| gpios = <&tlmm 85 0x1>; |
| linux,input-type = <1>; |
| linux,code = <115>; |
| debounce-interval = <15>; |
| linux,can-disable; |
| gpio-key,wakeup; |
| }; |
| }; |
| }; |
| |
| &blsp1_uart0 { |
| status = "ok"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart_console_active>; |
| }; |
| |
| &pm8953_gpios { |
| nfc_clk { |
| nfc_clk_default: nfc_clk_default { |
| pins = "gpio2"; |
| function = "normal"; |
| input-enable; |
| power-source = <1>; |
| }; |
| }; |
| }; |
| |
| &i2c_5 { /* BLSP2 QUP1 (NFC) */ |
| status = "ok"; |
| nq@28 { |
| compatible = "qcom,nq-nci"; |
| reg = <0x28>; |
| qcom,nq-irq = <&tlmm 17 0x00>; |
| qcom,nq-ven = <&tlmm 16 0x00>; |
| qcom,nq-firm = <&tlmm 62 0x00>; |
| qcom,nq-clkreq = <&pm8953_gpios 2 0x00>; |
| qcom,nq-esepwr = <&tlmm 141 0x00>; |
| interrupt-parent = <&tlmm>; |
| qcom,clk-src = "BBCLK2"; |
| interrupts = <17 0>; |
| interrupt-names = "nfc_irq"; |
| pinctrl-names = "nfc_active", "nfc_suspend"; |
| pinctrl-0 = <&nfc_int_active &nfc_disable_active |
| &nfc_clk_default>; |
| pinctrl-1 = <&nfc_int_suspend &nfc_disable_suspend>; |
| clocks = <&clock_gcc clk_bb_clk2_pin>; |
| clock-names = "ref_clk"; |
| }; |
| }; |
| |
| &sdhc_1 { |
| /* device core power supply */ |
| vdd-supply = <&pm8953_l8>; |
| qcom,vdd-voltage-level = <2900000 2900000>; |
| qcom,vdd-current-level = <200 570000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8953_l5>; |
| qcom,vdd-io-always-on; |
| qcom,vdd-io-lpm-sup; |
| qcom,vdd-io-voltage-level = <1800000 1800000>; |
| qcom,vdd-io-current-level = <200 325000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 192000000 |
| 384000000>; |
| qcom,nonremovable; |
| qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v"; |
| |
| status = "ok"; |
| }; |
| |
| &sdhc_2 { |
| /* device core power supply */ |
| vdd-supply = <&pm8953_l11>; |
| qcom,vdd-voltage-level = <2950000 2950000>; |
| qcom,vdd-current-level = <15000 800000>; |
| |
| /* device communication power supply */ |
| vdd-io-supply = <&pm8953_l12>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <200 22000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; |
| pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>; |
| |
| #address-cells = <0>; |
| interrupt-parent = <&sdhc_2>; |
| interrupts = <0 1 2>; |
| #interrupt-cells = <1>; |
| interrupt-map-mask = <0xffffffff>; |
| interrupt-map = <0 &intc 0 125 0 |
| 1 &intc 0 221 0 |
| 2 &tlmm 133 0>; |
| interrupt-names = "hc_irq", "pwr_irq", "status_irq"; |
| cd-gpios = <&tlmm 133 0x1>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 |
| 200000000>; |
| qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104"; |
| |
| status = "ok"; |
| }; |