Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
Conflicts:
MAINTAINERS
drivers/net/wireless/iwlwifi/pcie/trans.c
diff --git a/MAINTAINERS b/MAINTAINERS
index c5fd905..3075a2a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1800,6 +1800,9 @@
CFG80211 and NL80211
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: include/linux/nl80211.h
F: include/net/cfg80211.h
@@ -4340,7 +4343,8 @@
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/networking/mac80211-injection.txt
F: include/net/mac80211.h
@@ -4351,7 +4355,8 @@
M: Mattias Nissler <mattias.nissler@gmx.de>
L: linux-wireless@vger.kernel.org
W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: net/mac80211/rc80211_pid*
@@ -5695,6 +5700,9 @@
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
+W: http://wireless.kernel.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
S: Maintained
F: Documentation/rfkill.txt
F: net/rfkill/
diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c
index 9a96f14..c32ebd5 100644
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -232,17 +232,19 @@
int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
bool enable)
{
- struct pci_dev *pdev = pc->core->bus->host_pci;
+ struct pci_dev *pdev;
u32 coremask, tmp;
int err = 0;
- if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+ if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
/* This bcma device is not on a PCI host-bus. So the IRQs are
* not routed through the PCI core.
* So we must not enable routing through the PCI core. */
goto out;
}
+ pdev = pc->core->bus->host_pci;
+
err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
if (err)
goto out;
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 67c13af..c06b6cb 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -877,6 +877,10 @@
* from the mac80211 subsystem. */
u16 mac80211_initially_registered_queues;
+ /* Set this if we call ieee80211_register_hw() and check if we call
+ * ieee80211_unregister_hw(). */
+ bool hw_registred;
+
/* We can only have one operating interface (802.11 core)
* at a time. General information about this interface follows.
*/
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 5a39b22..acd03a4 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2437,6 +2437,7 @@
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
+ wl->hw_registred = true;
b43_leds_register(wl->current_dev);
goto out;
@@ -5299,6 +5300,7 @@
hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
wl->mac80211_initially_registered_queues = hw->queues;
+ wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
if (is_valid_ether_addr(sprom->et1mac))
@@ -5370,12 +5372,15 @@
* as the ieee80211 unreg will destroy the workqueue. */
cancel_work_sync(&wldev->restart_work);
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
- b43_leds_stop(wldev);
- ieee80211_unregister_hw(wl->hw);
+ B43_WARN_ON(!wl);
+ if (wl->current_dev == wldev && wl->hw_registred) {
+ /* Restore the queues count before unregistering, because firmware detect
+ * might have modified it. Restoring is important, so the networking
+ * stack can properly free resources. */
+ wl->hw->queues = wl->mac80211_initially_registered_queues;
+ b43_leds_stop(wldev);
+ ieee80211_unregister_hw(wl->hw);
+ }
b43_one_core_detach(wldev->dev);
@@ -5446,7 +5451,7 @@
cancel_work_sync(&wldev->restart_work);
B43_WARN_ON(!wl);
- if (wl->current_dev == wldev) {
+ if (wl->current_dev == wldev && wl->hw_registred) {
/* Restore the queues count before unregistering, because firmware detect
* might have modified it. Restoring is important, so the networking
* stack can properly free resources. */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 9cfae0c..95aa8e1 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1903,14 +1903,6 @@
netif_stop_queue(priv->net_dev);
}
-/* Called by register_netdev() */
-static int ipw2100_net_init(struct net_device *dev)
-{
- struct ipw2100_priv *priv = libipw_priv(dev);
-
- return ipw2100_up(priv, 1);
-}
-
static int ipw2100_wdev_init(struct net_device *dev)
{
struct ipw2100_priv *priv = libipw_priv(dev);
@@ -6087,7 +6079,6 @@
.ndo_stop = ipw2100_close,
.ndo_start_xmit = libipw_xmit,
.ndo_change_mtu = libipw_change_mtu,
- .ndo_init = ipw2100_net_init,
.ndo_tx_timeout = ipw2100_tx_timeout,
.ndo_set_mac_address = ipw2100_set_address,
.ndo_validate_addr = eth_validate_addr,
@@ -6329,6 +6320,10 @@
printk(KERN_INFO DRV_NAME
": Detected Intel PRO/Wireless 2100 Network Connection\n");
+ err = ipw2100_up(priv, 1);
+ if (err)
+ goto fail;
+
err = ipw2100_wdev_init(dev);
if (err)
goto fail;
@@ -6338,12 +6333,7 @@
* network device we would call ipw2100_up. This introduced a race
* condition with newer hotplug configurations (network was coming
* up and making calls before the device was initialized).
- *
- * If we called ipw2100_up before we registered the device, then the
- * device name wasn't registered. So, we instead use the net_dev->init
- * member to call a function that then just turns and calls ipw2100_up.
- * net_dev->init is called after name allocation but before the
- * notifier chain is called */
+ */
err = register_netdev(dev);
if (err) {
printk(KERN_WARNING DRV_NAME
diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c
index 286ce4e..b29b798 100644
--- a/drivers/net/wireless/iwlwifi/dvm/sta.c
+++ b/drivers/net/wireless/iwlwifi/dvm/sta.c
@@ -1251,7 +1251,7 @@
key_flags |= STA_KEY_MULTICAST_MSK;
sta_cmd.key.key_flags = key_flags;
- sta_cmd.key.key_offset = WEP_INVALID_OFFSET;
+ sta_cmd.key.key_offset = keyconf->hw_key_idx;
sta_cmd.sta.modify_mask = STA_MODIFY_KEY_MASK;
sta_cmd.mode = STA_CONTROL_MODIFY_MSK;
diff --git a/drivers/net/wireless/iwlwifi/iwl-prph.h b/drivers/net/wireless/iwlwifi/iwl-prph.h
index a9f0415..9253ef1 100644
--- a/drivers/net/wireless/iwlwifi/iwl-prph.h
+++ b/drivers/net/wireless/iwlwifi/iwl-prph.h
@@ -224,6 +224,7 @@
#define SCD_TXFACT (SCD_BASE + 0x10)
#define SCD_ACTIVE (SCD_BASE + 0x14)
#define SCD_QUEUECHAIN_SEL (SCD_BASE + 0xe8)
+#define SCD_CHAINEXT_EN (SCD_BASE + 0x244)
#define SCD_AGGR_SEL (SCD_BASE + 0x248)
#define SCD_INTERRUPT_MASK (SCD_BASE + 0x108)
diff --git a/drivers/net/wireless/iwlwifi/pcie/6000.c b/drivers/net/wireless/iwlwifi/pcie/6000.c
index 8dd8a6f..cb08ba0 100644
--- a/drivers/net/wireless/iwlwifi/pcie/6000.c
+++ b/drivers/net/wireless/iwlwifi/pcie/6000.c
@@ -35,17 +35,20 @@
#define IWL6000_UCODE_API_MAX 6
#define IWL6050_UCODE_API_MAX 5
#define IWL6000G2_UCODE_API_MAX 6
+#define IWL6035_UCODE_API_MAX 6
/* Oldest version we won't warn about */
#define IWL6000_UCODE_API_OK 4
#define IWL6000G2_UCODE_API_OK 5
#define IWL6050_UCODE_API_OK 5
#define IWL6000G2B_UCODE_API_OK 6
+#define IWL6035_UCODE_API_OK 6
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
-#define IWL6000G2_UCODE_API_MIN 4
+#define IWL6000G2_UCODE_API_MIN 5
+#define IWL6035_UCODE_API_MIN 6
/* EEPROM versions */
#define EEPROM_6000_TX_POWER_VERSION (4)
@@ -243,9 +246,25 @@
IWL_DEVICE_6030,
};
+#define IWL_DEVICE_6035 \
+ .fw_name_pre = IWL6030_FW_PRE, \
+ .ucode_api_max = IWL6035_UCODE_API_MAX, \
+ .ucode_api_ok = IWL6035_UCODE_API_OK, \
+ .ucode_api_min = IWL6035_UCODE_API_MIN, \
+ .device_family = IWL_DEVICE_FAMILY_6030, \
+ .max_inst_size = IWL60_RTC_INST_SIZE, \
+ .max_data_size = IWL60_RTC_DATA_SIZE, \
+ .eeprom_ver = EEPROM_6030_EEPROM_VERSION, \
+ .eeprom_calib_ver = EEPROM_6030_TX_POWER_VERSION, \
+ .base_params = &iwl6000_g2_base_params, \
+ .bt_params = &iwl6000_bt_params, \
+ .need_temp_offset_calib = true, \
+ .led_mode = IWL_LED_RF_STATE, \
+ .adv_pm = true
+
const struct iwl_cfg iwl6035_2agn_cfg = {
.name = "Intel(R) Centrino(R) Advanced-N 6235 AGN",
- IWL_DEVICE_6030,
+ IWL_DEVICE_6035,
.ht_params = &iwl6000_ht_params,
};
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index 1eabb83..69dece5 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1054,6 +1054,11 @@
iwl_write_prph(trans, SCD_DRAM_BASE_ADDR,
trans_pcie->scd_bc_tbls.dma >> 10);
+ /* The chain extension of the SCD doesn't work well. This feature is
+ * enabled by default by the HW, so we need to disable it manually.
+ */
+ iwl_write_prph(trans, SCD_CHAINEXT_EN, 0);
+
for (i = 0; i < trans_pcie->n_q_to_fifo; i++) {
int fifo = trans_pcie->setup_q_to_fifo[i];
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index 4c9336c..a0b7cfd 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -1555,6 +1555,7 @@
hdr = (struct ieee80211_hdr *) skb->data;
mac80211_hwsim_monitor_ack(data2->hw, hdr->addr2);
}
+ txi->flags |= IEEE80211_TX_STAT_ACK;
}
ieee80211_tx_status_irqsafe(data2->hw, skb);
return 0;
diff --git a/drivers/net/wireless/rtl818x/rtl8187/leds.c b/drivers/net/wireless/rtl818x/rtl8187/leds.c
index 2e0de2f..c2d5b49 100644
--- a/drivers/net/wireless/rtl818x/rtl8187/leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187/leds.c
@@ -117,7 +117,7 @@
radio_on = true;
} else if (radio_on) {
radio_on = false;
- cancel_delayed_work_sync(&priv->led_on);
+ cancel_delayed_work(&priv->led_on);
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
}
} else if (radio_on) {
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 0f45d02..d7134c1 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -3100,7 +3100,7 @@
}
local->oper_channel = cbss->channel;
- ieee80211_hw_config(local, 0);
+ ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!have_sta) {
u32 rates = 0, basic_rates = 0;
diff --git a/net/nfc/llcp/sock.c b/net/nfc/llcp/sock.c
index 30e3cc7..2c0b317 100644
--- a/net/nfc/llcp/sock.c
+++ b/net/nfc/llcp/sock.c
@@ -292,6 +292,9 @@
pr_debug("%p\n", sk);
+ if (llcp_sock == NULL)
+ return -EBADFD;
+
addr->sa_family = AF_NFC;
*len = sizeof(struct sockaddr_nfc_llcp);