| /* |
| * ACPI support for Intel Lynxpoint LPSS. |
| * |
| * Copyright (C) 2013, Intel Corporation |
| * Authors: Mika Westerberg <mika.westerberg@linux.intel.com> |
| * Rafael J. Wysocki <rafael.j.wysocki@intel.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/acpi.h> |
| #include <linux/clk.h> |
| #include <linux/clkdev.h> |
| #include <linux/clk-provider.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/clk-lpss.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/delay.h> |
| |
| #include "internal.h" |
| |
| ACPI_MODULE_NAME("acpi_lpss"); |
| |
| #ifdef CONFIG_X86_INTEL_LPSS |
| |
| #define LPSS_ADDR(desc) ((unsigned long)&desc) |
| |
| #define LPSS_CLK_SIZE 0x04 |
| #define LPSS_LTR_SIZE 0x18 |
| |
| /* Offsets relative to LPSS_PRIVATE_OFFSET */ |
| #define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16)) |
| #define LPSS_RESETS 0x04 |
| #define LPSS_RESETS_RESET_FUNC BIT(0) |
| #define LPSS_RESETS_RESET_APB BIT(1) |
| #define LPSS_GENERAL 0x08 |
| #define LPSS_GENERAL_LTR_MODE_SW BIT(2) |
| #define LPSS_GENERAL_UART_RTS_OVRD BIT(3) |
| #define LPSS_SW_LTR 0x10 |
| #define LPSS_AUTO_LTR 0x14 |
| #define LPSS_LTR_SNOOP_REQ BIT(15) |
| #define LPSS_LTR_SNOOP_MASK 0x0000FFFF |
| #define LPSS_LTR_SNOOP_LAT_1US 0x800 |
| #define LPSS_LTR_SNOOP_LAT_32US 0xC00 |
| #define LPSS_LTR_SNOOP_LAT_SHIFT 5 |
| #define LPSS_LTR_SNOOP_LAT_CUTOFF 3000 |
| #define LPSS_LTR_MAX_VAL 0x3FF |
| #define LPSS_TX_INT 0x20 |
| #define LPSS_TX_INT_MASK BIT(1) |
| |
| #define LPSS_PRV_REG_COUNT 9 |
| |
| struct lpss_shared_clock { |
| const char *name; |
| unsigned long rate; |
| struct clk *clk; |
| }; |
| |
| struct lpss_private_data; |
| |
| struct lpss_device_desc { |
| bool clk_required; |
| const char *clkdev_name; |
| bool ltr_required; |
| unsigned int prv_offset; |
| size_t prv_size_override; |
| bool clk_divider; |
| bool clk_gate; |
| bool save_ctx; |
| struct lpss_shared_clock *shared_clock; |
| void (*setup)(struct lpss_private_data *pdata); |
| }; |
| |
| static struct lpss_device_desc lpss_dma_desc = { |
| .clk_required = true, |
| .clkdev_name = "hclk", |
| }; |
| |
| struct lpss_private_data { |
| void __iomem *mmio_base; |
| resource_size_t mmio_size; |
| struct clk *clk; |
| const struct lpss_device_desc *dev_desc; |
| u32 prv_reg_ctx[LPSS_PRV_REG_COUNT]; |
| }; |
| |
| static void lpss_uart_setup(struct lpss_private_data *pdata) |
| { |
| unsigned int offset; |
| u32 reg; |
| |
| offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; |
| reg = readl(pdata->mmio_base + offset); |
| writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + offset); |
| |
| offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; |
| reg = readl(pdata->mmio_base + offset); |
| writel(reg | LPSS_GENERAL_UART_RTS_OVRD, pdata->mmio_base + offset); |
| } |
| |
| static void lpss_i2c_setup(struct lpss_private_data *pdata) |
| { |
| unsigned int offset; |
| u32 val; |
| |
| offset = pdata->dev_desc->prv_offset + LPSS_RESETS; |
| val = readl(pdata->mmio_base + offset); |
| val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC; |
| writel(val, pdata->mmio_base + offset); |
| } |
| |
| static struct lpss_device_desc wpt_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .ltr_required = true, |
| .clk_divider = true, |
| .clk_gate = true, |
| }; |
| |
| static struct lpss_device_desc lpt_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .ltr_required = true, |
| .clk_divider = true, |
| .clk_gate = true, |
| }; |
| |
| static struct lpss_device_desc lpt_i2c_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .ltr_required = true, |
| .clk_gate = true, |
| }; |
| |
| static struct lpss_device_desc lpt_uart_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .ltr_required = true, |
| .clk_divider = true, |
| .clk_gate = true, |
| .setup = lpss_uart_setup, |
| }; |
| |
| static struct lpss_device_desc lpt_sdio_dev_desc = { |
| .prv_offset = 0x1000, |
| .prv_size_override = 0x1018, |
| .ltr_required = true, |
| }; |
| |
| static struct lpss_shared_clock pwm_clock = { |
| .name = "pwm_clk", |
| .rate = 25000000, |
| }; |
| |
| static struct lpss_device_desc byt_pwm_dev_desc = { |
| .clk_required = true, |
| .save_ctx = true, |
| .shared_clock = &pwm_clock, |
| }; |
| |
| static struct lpss_device_desc byt_uart_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .clk_divider = true, |
| .clk_gate = true, |
| .save_ctx = true, |
| .setup = lpss_uart_setup, |
| }; |
| |
| static struct lpss_device_desc byt_spi_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x400, |
| .clk_divider = true, |
| .clk_gate = true, |
| .save_ctx = true, |
| }; |
| |
| static struct lpss_device_desc byt_sdio_dev_desc = { |
| .clk_required = true, |
| }; |
| |
| static struct lpss_shared_clock i2c_clock = { |
| .name = "i2c_clk", |
| .rate = 100000000, |
| }; |
| |
| static struct lpss_device_desc byt_i2c_dev_desc = { |
| .clk_required = true, |
| .prv_offset = 0x800, |
| .save_ctx = true, |
| .shared_clock = &i2c_clock, |
| .setup = lpss_i2c_setup, |
| }; |
| |
| static struct lpss_shared_clock bsw_pwm_clock = { |
| .name = "pwm_clk", |
| .rate = 19200000, |
| }; |
| |
| static struct lpss_device_desc bsw_pwm_dev_desc = { |
| .clk_required = true, |
| .save_ctx = true, |
| .shared_clock = &bsw_pwm_clock, |
| }; |
| |
| #else |
| |
| #define LPSS_ADDR(desc) (0UL) |
| |
| #endif /* CONFIG_X86_INTEL_LPSS */ |
| |
| static const struct acpi_device_id acpi_lpss_device_ids[] = { |
| /* Generic LPSS devices */ |
| { "INTL9C60", LPSS_ADDR(lpss_dma_desc) }, |
| |
| /* Lynxpoint LPSS devices */ |
| { "INT33C0", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT33C1", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) }, |
| { "INT33C7", }, |
| |
| /* BayTrail LPSS devices */ |
| { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) }, |
| { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) }, |
| { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) }, |
| { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) }, |
| { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) }, |
| { "INT33B2", }, |
| { "INT33FC", }, |
| |
| /* Braswell LPSS devices */ |
| { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) }, |
| { "8086228A", LPSS_ADDR(byt_uart_dev_desc) }, |
| { "8086228E", LPSS_ADDR(byt_spi_dev_desc) }, |
| { "808622C1", LPSS_ADDR(byt_i2c_dev_desc) }, |
| |
| { "INT3430", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT3431", LPSS_ADDR(lpt_dev_desc) }, |
| { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) }, |
| { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) }, |
| { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) }, |
| { "INT3437", }, |
| |
| { "INT3438", LPSS_ADDR(wpt_dev_desc) }, |
| |
| { } |
| }; |
| |
| #ifdef CONFIG_X86_INTEL_LPSS |
| |
| static int is_memory(struct acpi_resource *res, void *not_used) |
| { |
| struct resource r; |
| return !acpi_dev_resource_memory(res, &r); |
| } |
| |
| /* LPSS main clock device. */ |
| static struct platform_device *lpss_clk_dev; |
| |
| static inline void lpt_register_clock_device(void) |
| { |
| lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0); |
| } |
| |
| static int register_device_clock(struct acpi_device *adev, |
| struct lpss_private_data *pdata) |
| { |
| const struct lpss_device_desc *dev_desc = pdata->dev_desc; |
| struct lpss_shared_clock *shared_clock = dev_desc->shared_clock; |
| const char *devname = dev_name(&adev->dev); |
| struct clk *clk = ERR_PTR(-ENODEV); |
| struct lpss_clk_data *clk_data; |
| const char *parent, *clk_name; |
| void __iomem *prv_base; |
| |
| if (!lpss_clk_dev) |
| lpt_register_clock_device(); |
| |
| clk_data = platform_get_drvdata(lpss_clk_dev); |
| if (!clk_data) |
| return -ENODEV; |
| |
| if (dev_desc->clkdev_name) { |
| clk_register_clkdev(clk_data->clk, dev_desc->clkdev_name, |
| devname); |
| return 0; |
| } |
| |
| if (!pdata->mmio_base |
| || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) |
| return -ENODATA; |
| |
| parent = clk_data->name; |
| prv_base = pdata->mmio_base + dev_desc->prv_offset; |
| |
| if (shared_clock) { |
| clk = shared_clock->clk; |
| if (!clk) { |
| clk = clk_register_fixed_rate(NULL, shared_clock->name, |
| "lpss_clk", 0, |
| shared_clock->rate); |
| shared_clock->clk = clk; |
| } |
| parent = shared_clock->name; |
| } |
| |
| if (dev_desc->clk_gate) { |
| clk = clk_register_gate(NULL, devname, parent, 0, |
| prv_base, 0, 0, NULL); |
| parent = devname; |
| } |
| |
| if (dev_desc->clk_divider) { |
| /* Prevent division by zero */ |
| if (!readl(prv_base)) |
| writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base); |
| |
| clk_name = kasprintf(GFP_KERNEL, "%s-div", devname); |
| if (!clk_name) |
| return -ENOMEM; |
| clk = clk_register_fractional_divider(NULL, clk_name, parent, |
| 0, prv_base, |
| 1, 15, 16, 15, 0, NULL); |
| parent = clk_name; |
| |
| clk_name = kasprintf(GFP_KERNEL, "%s-update", devname); |
| if (!clk_name) { |
| kfree(parent); |
| return -ENOMEM; |
| } |
| clk = clk_register_gate(NULL, clk_name, parent, |
| CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, |
| prv_base, 31, 0, NULL); |
| kfree(parent); |
| kfree(clk_name); |
| } |
| |
| if (IS_ERR(clk)) |
| return PTR_ERR(clk); |
| |
| pdata->clk = clk; |
| clk_register_clkdev(clk, NULL, devname); |
| return 0; |
| } |
| |
| static int acpi_lpss_create_device(struct acpi_device *adev, |
| const struct acpi_device_id *id) |
| { |
| struct lpss_device_desc *dev_desc; |
| struct lpss_private_data *pdata; |
| struct resource_list_entry *rentry; |
| struct list_head resource_list; |
| struct platform_device *pdev; |
| int ret; |
| |
| dev_desc = (struct lpss_device_desc *)id->driver_data; |
| if (!dev_desc) { |
| pdev = acpi_create_platform_device(adev); |
| return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; |
| } |
| pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| |
| INIT_LIST_HEAD(&resource_list); |
| ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL); |
| if (ret < 0) |
| goto err_out; |
| |
| list_for_each_entry(rentry, &resource_list, node) |
| if (resource_type(&rentry->res) == IORESOURCE_MEM) { |
| if (dev_desc->prv_size_override) |
| pdata->mmio_size = dev_desc->prv_size_override; |
| else |
| pdata->mmio_size = resource_size(&rentry->res); |
| pdata->mmio_base = ioremap(rentry->res.start, |
| pdata->mmio_size); |
| break; |
| } |
| |
| acpi_dev_free_resource_list(&resource_list); |
| |
| pdata->dev_desc = dev_desc; |
| |
| if (dev_desc->clk_required) { |
| ret = register_device_clock(adev, pdata); |
| if (ret) { |
| /* Skip the device, but continue the namespace scan. */ |
| ret = 0; |
| goto err_out; |
| } |
| } |
| |
| /* |
| * This works around a known issue in ACPI tables where LPSS devices |
| * have _PS0 and _PS3 without _PSC (and no power resources), so |
| * acpi_bus_init_power() will assume that the BIOS has put them into D0. |
| */ |
| ret = acpi_device_fix_up_power(adev); |
| if (ret) { |
| /* Skip the device, but continue the namespace scan. */ |
| ret = 0; |
| goto err_out; |
| } |
| |
| if (dev_desc->setup) |
| dev_desc->setup(pdata); |
| |
| adev->driver_data = pdata; |
| pdev = acpi_create_platform_device(adev); |
| if (!IS_ERR_OR_NULL(pdev)) { |
| device_enable_async_suspend(&pdev->dev); |
| return 1; |
| } |
| |
| ret = PTR_ERR(pdev); |
| adev->driver_data = NULL; |
| |
| err_out: |
| kfree(pdata); |
| return ret; |
| } |
| |
| static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg) |
| { |
| return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg); |
| } |
| |
| static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata, |
| unsigned int reg) |
| { |
| writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg); |
| } |
| |
| static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val) |
| { |
| struct acpi_device *adev; |
| struct lpss_private_data *pdata; |
| unsigned long flags; |
| int ret; |
| |
| ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev); |
| if (WARN_ON(ret)) |
| return ret; |
| |
| spin_lock_irqsave(&dev->power.lock, flags); |
| if (pm_runtime_suspended(dev)) { |
| ret = -EAGAIN; |
| goto out; |
| } |
| pdata = acpi_driver_data(adev); |
| if (WARN_ON(!pdata || !pdata->mmio_base)) { |
| ret = -ENODEV; |
| goto out; |
| } |
| *val = __lpss_reg_read(pdata, reg); |
| |
| out: |
| spin_unlock_irqrestore(&dev->power.lock, flags); |
| return ret; |
| } |
| |
| static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| u32 ltr_value = 0; |
| unsigned int reg; |
| int ret; |
| |
| reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR; |
| ret = lpss_reg_read(dev, reg, <r_value); |
| if (ret) |
| return ret; |
| |
| return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value); |
| } |
| |
| static ssize_t lpss_ltr_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| u32 ltr_mode = 0; |
| char *outstr; |
| int ret; |
| |
| ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode); |
| if (ret) |
| return ret; |
| |
| outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto"; |
| return sprintf(buf, "%s\n", outstr); |
| } |
| |
| static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL); |
| static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL); |
| static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL); |
| |
| static struct attribute *lpss_attrs[] = { |
| &dev_attr_auto_ltr.attr, |
| &dev_attr_sw_ltr.attr, |
| &dev_attr_ltr_mode.attr, |
| NULL, |
| }; |
| |
| static struct attribute_group lpss_attr_group = { |
| .attrs = lpss_attrs, |
| .name = "lpss_ltr", |
| }; |
| |
| static void acpi_lpss_set_ltr(struct device *dev, s32 val) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| u32 ltr_mode, ltr_val; |
| |
| ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL); |
| if (val < 0) { |
| if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) { |
| ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW; |
| __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); |
| } |
| return; |
| } |
| ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK; |
| if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_32US; |
| val = LPSS_LTR_MAX_VAL; |
| } else if (val > LPSS_LTR_MAX_VAL) { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ; |
| val >>= LPSS_LTR_SNOOP_LAT_SHIFT; |
| } else { |
| ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ; |
| } |
| ltr_val |= val; |
| __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR); |
| if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) { |
| ltr_mode |= LPSS_GENERAL_LTR_MODE_SW; |
| __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); |
| } |
| } |
| |
| #ifdef CONFIG_PM |
| /** |
| * acpi_lpss_save_ctx() - Save the private registers of LPSS device |
| * @dev: LPSS device |
| * |
| * Most LPSS devices have private registers which may loose their context when |
| * the device is powered down. acpi_lpss_save_ctx() saves those registers into |
| * prv_reg_ctx array. |
| */ |
| static void acpi_lpss_save_ctx(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| unsigned int i; |
| |
| for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { |
| unsigned long offset = i * sizeof(u32); |
| |
| pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset); |
| dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n", |
| pdata->prv_reg_ctx[i], offset); |
| } |
| } |
| |
| /** |
| * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device |
| * @dev: LPSS device |
| * |
| * Restores the registers that were previously stored with acpi_lpss_save_ctx(). |
| */ |
| static void acpi_lpss_restore_ctx(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| unsigned int i; |
| |
| /* |
| * The following delay is needed or the subsequent write operations may |
| * fail. The LPSS devices are actually PCI devices and the PCI spec |
| * expects 10ms delay before the device can be accessed after D3 to D0 |
| * transition. |
| */ |
| msleep(10); |
| |
| for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { |
| unsigned long offset = i * sizeof(u32); |
| |
| __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset); |
| dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n", |
| pdata->prv_reg_ctx[i], offset); |
| } |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int acpi_lpss_suspend_late(struct device *dev) |
| { |
| int ret = pm_generic_suspend_late(dev); |
| |
| if (ret) |
| return ret; |
| |
| acpi_lpss_save_ctx(dev); |
| return acpi_dev_suspend_late(dev); |
| } |
| |
| static int acpi_lpss_resume_early(struct device *dev) |
| { |
| int ret = acpi_dev_resume_early(dev); |
| |
| if (ret) |
| return ret; |
| |
| acpi_lpss_restore_ctx(dev); |
| return pm_generic_resume_early(dev); |
| } |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| #ifdef CONFIG_PM_RUNTIME |
| static int acpi_lpss_runtime_suspend(struct device *dev) |
| { |
| int ret = pm_generic_runtime_suspend(dev); |
| |
| if (ret) |
| return ret; |
| |
| acpi_lpss_save_ctx(dev); |
| return acpi_dev_runtime_suspend(dev); |
| } |
| |
| static int acpi_lpss_runtime_resume(struct device *dev) |
| { |
| int ret = acpi_dev_runtime_resume(dev); |
| |
| if (ret) |
| return ret; |
| |
| acpi_lpss_restore_ctx(dev); |
| return pm_generic_runtime_resume(dev); |
| } |
| #endif /* CONFIG_PM_RUNTIME */ |
| #endif /* CONFIG_PM */ |
| |
| static struct dev_pm_domain acpi_lpss_pm_domain = { |
| .ops = { |
| #ifdef CONFIG_PM_SLEEP |
| .prepare = acpi_subsys_prepare, |
| .complete = acpi_subsys_complete, |
| .suspend = acpi_subsys_suspend, |
| .suspend_late = acpi_lpss_suspend_late, |
| .resume_early = acpi_lpss_resume_early, |
| .freeze = acpi_subsys_freeze, |
| .poweroff = acpi_subsys_suspend, |
| .poweroff_late = acpi_lpss_suspend_late, |
| .restore_early = acpi_lpss_resume_early, |
| #endif |
| #ifdef CONFIG_PM_RUNTIME |
| .runtime_suspend = acpi_lpss_runtime_suspend, |
| .runtime_resume = acpi_lpss_runtime_resume, |
| #endif |
| }, |
| }; |
| |
| static int acpi_lpss_platform_notify(struct notifier_block *nb, |
| unsigned long action, void *data) |
| { |
| struct platform_device *pdev = to_platform_device(data); |
| struct lpss_private_data *pdata; |
| struct acpi_device *adev; |
| const struct acpi_device_id *id; |
| |
| id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev); |
| if (!id || !id->driver_data) |
| return 0; |
| |
| if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) |
| return 0; |
| |
| pdata = acpi_driver_data(adev); |
| if (!pdata || !pdata->mmio_base) |
| return 0; |
| |
| if (pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) { |
| dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n"); |
| return 0; |
| } |
| |
| switch (action) { |
| case BUS_NOTIFY_BOUND_DRIVER: |
| if (pdata->dev_desc->save_ctx) |
| pdev->dev.pm_domain = &acpi_lpss_pm_domain; |
| break; |
| case BUS_NOTIFY_UNBOUND_DRIVER: |
| if (pdata->dev_desc->save_ctx) |
| pdev->dev.pm_domain = NULL; |
| break; |
| case BUS_NOTIFY_ADD_DEVICE: |
| if (pdata->dev_desc->ltr_required) |
| return sysfs_create_group(&pdev->dev.kobj, |
| &lpss_attr_group); |
| case BUS_NOTIFY_DEL_DEVICE: |
| if (pdata->dev_desc->ltr_required) |
| sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group); |
| default: |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static struct notifier_block acpi_lpss_nb = { |
| .notifier_call = acpi_lpss_platform_notify, |
| }; |
| |
| static void acpi_lpss_bind(struct device *dev) |
| { |
| struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); |
| |
| if (!pdata || !pdata->mmio_base || !pdata->dev_desc->ltr_required) |
| return; |
| |
| if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) |
| dev->power.set_latency_tolerance = acpi_lpss_set_ltr; |
| else |
| dev_err(dev, "MMIO size insufficient to access LTR\n"); |
| } |
| |
| static void acpi_lpss_unbind(struct device *dev) |
| { |
| dev->power.set_latency_tolerance = NULL; |
| } |
| |
| static struct acpi_scan_handler lpss_handler = { |
| .ids = acpi_lpss_device_ids, |
| .attach = acpi_lpss_create_device, |
| .bind = acpi_lpss_bind, |
| .unbind = acpi_lpss_unbind, |
| }; |
| |
| void __init acpi_lpss_init(void) |
| { |
| if (!lpt_clk_init()) { |
| bus_register_notifier(&platform_bus_type, &acpi_lpss_nb); |
| acpi_scan_add_handler(&lpss_handler); |
| } |
| } |
| |
| #else |
| |
| static struct acpi_scan_handler lpss_handler = { |
| .ids = acpi_lpss_device_ids, |
| }; |
| |
| void __init acpi_lpss_init(void) |
| { |
| acpi_scan_add_handler(&lpss_handler); |
| } |
| |
| #endif /* CONFIG_X86_INTEL_LPSS */ |