ARM: integrator: convert to common clock
This converts the Integrator platform to use common clock
and the ICST driver. Since from this point not all ARM
reference platforms use the clock, we define
CONFIG_PLAT_VERSATILE_CLOCK and select it for all platforms
except the Integrator.
Open issue: I could not use the .init_early() field of the
machine descriptor to initialize the clocks, but had to
move them to .init_irq(), so presumably .init_early() is
so early that common clock is not up, and .init_machine()
is too late since it's needed for the clockevent/clocksource
initialization. Any suggestions on how to solve this is
very welcome.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mturquette@linaro.org: use 'select' instead of versatile Kconfig]
Signed-off-by: Mike Turquette <mturquette@linaro.org>
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index a8c6480..82d5c83 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -21,8 +21,8 @@
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <linux/gfp.h>
-#include <linux/clkdev.h>
#include <linux/mtd/physmap.h>
+#include <linux/platform_data/clk-integrator.h>
#include <mach/hardware.h>
#include <mach/platform.h>
@@ -171,65 +171,10 @@
fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START,
IRQ_CP_CPPLDINT, sic_mask, NULL);
+ integrator_clk_init(true);
}
/*
- * Clock handling
- */
-#define CM_LOCK (__io_address(INTEGRATOR_HDR_BASE)+INTEGRATOR_HDR_LOCK_OFFSET)
-#define CM_AUXOSC (__io_address(INTEGRATOR_HDR_BASE)+0x1c)
-
-static const struct icst_params cp_auxvco_params = {
- .ref = 24000000,
- .vco_max = ICST525_VCO_MAX_5V,
- .vco_min = ICST525_VCO_MIN,
- .vd_min = 8,
- .vd_max = 263,
- .rd_min = 3,
- .rd_max = 65,
- .s2div = icst525_s2div,
- .idx2s = icst525_idx2s,
-};
-
-static void cp_auxvco_set(struct clk *clk, struct icst_vco vco)
-{
- u32 val;
-
- val = readl(clk->vcoreg) & ~0x7ffff;
- val |= vco.v | (vco.r << 9) | (vco.s << 16);
-
- writel(0xa05f, CM_LOCK);
- writel(val, clk->vcoreg);
- writel(0, CM_LOCK);
-}
-
-static const struct clk_ops cp_auxclk_ops = {
- .round = icst_clk_round,
- .set = icst_clk_set,
- .setvco = cp_auxvco_set,
-};
-
-static struct clk cp_auxclk = {
- .ops = &cp_auxclk_ops,
- .params = &cp_auxvco_params,
- .vcoreg = CM_AUXOSC,
-};
-
-static struct clk sp804_clk = {
- .rate = 1000000,
-};
-
-static struct clk_lookup cp_lookups[] = {
- { /* CLCD */
- .dev_id = "clcd",
- .clk = &cp_auxclk,
- }, { /* SP804 timers */
- .dev_id = "sp804",
- .clk = &sp804_clk,
- },
-};
-
-/*
* Flash handling.
*/
static int intcp_flash_init(struct platform_device *dev)
@@ -406,10 +351,6 @@
static void __init intcp_init_early(void)
{
- clkdev_add_table(cp_lookups, ARRAY_SIZE(cp_lookups));
-
- integrator_init_early();
-
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif