ath9k: remove VEOL support for ad-hoc
With VEOL, Beacon transmission in ad-hoc does not currently work.
I believe for larger ad-hoc networks, VEOL is too unreliable, as
it can get beacon transmissions stuck during synchronization.
Use SWBA based beacon trasmission similar to AP mode instead.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Acked-by: Benoit Papillault <benoit.papillault@free.fr>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c
index 77face7..f43d85a 100644
--- a/drivers/net/wireless/ath/ath9k/beacon.c
+++ b/drivers/net/wireless/ath/ath9k/beacon.c
@@ -76,22 +76,13 @@
ds = bf->bf_desc;
flags = ATH9K_TXDESC_NOACK;
- if (((sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
- (sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) &&
- (ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
- ds->ds_link = bf->bf_daddr; /* self-linked */
- flags |= ATH9K_TXDESC_VEOL;
- /* Let hardware handle antenna switching. */
- antenna = 0;
- } else {
- ds->ds_link = 0;
- /*
- * Switch antenna every beacon.
- * Should only switch every beacon period, not for every SWBA
- * XXX assumes two antennae
- */
- antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
- }
+ ds->ds_link = 0;
+ /*
+ * Switch antenna every beacon.
+ * Should only switch every beacon period, not for every SWBA
+ * XXX assumes two antennae
+ */
+ antenna = ((sc->beacon.ast_be_xmit / sc->nbcnvifs) & 1 ? 2 : 1);
sband = &sc->sbands[common->hw->conf.channel->band];
rate = sband->bitrates[rateidx].hw_value;
@@ -215,36 +206,6 @@
return bf;
}
-/*
- * Startup beacon transmission for adhoc mode when they are sent entirely
- * by the hardware using the self-linked descriptor + veol trick.
-*/
-static void ath_beacon_start_adhoc(struct ath_softc *sc,
- struct ieee80211_vif *vif)
-{
- struct ath_hw *ah = sc->sc_ah;
- struct ath_common *common = ath9k_hw_common(ah);
- struct ath_buf *bf;
- struct ath_vif *avp;
- struct sk_buff *skb;
-
- avp = (void *)vif->drv_priv;
-
- if (avp->av_bcbuf == NULL)
- return;
-
- bf = avp->av_bcbuf;
- skb = bf->bf_mpdu;
-
- ath_beacon_setup(sc, avp, bf, 0);
-
- /* NB: caller is known to have already stopped tx dma */
- ath9k_hw_puttxbuf(ah, sc->beacon.beaconq, bf->bf_daddr);
- ath9k_hw_txstart(ah, sc->beacon.beaconq);
- ath_print(common, ATH_DBG_BEACON, "TXDP%u = %llx (%p)\n",
- sc->beacon.beaconq, ito64(bf->bf_daddr), bf->bf_desc);
-}
-
int ath_beacon_alloc(struct ath_wiphy *aphy, struct ieee80211_vif *vif)
{
struct ath_softc *sc = aphy->sc;
@@ -265,7 +226,8 @@
list_del(&avp->av_bcbuf->list);
if (sc->sc_ah->opmode == NL80211_IFTYPE_AP ||
- !(sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)) {
+ sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC ||
+ sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT) {
int slot;
/*
* Assign the vif to a beacon xmit slot. As
@@ -715,8 +677,7 @@
* self-linked tx descriptor and let the hardware deal with things.
*/
intval |= ATH9K_BEACON_ENA;
- if (!(ah->caps.hw_caps & ATH9K_HW_CAP_VEOL))
- ah->imask |= ATH9K_INT_SWBA;
+ ah->imask |= ATH9K_INT_SWBA;
ath_beaconq_config(sc);
@@ -726,10 +687,6 @@
ath9k_beacon_init(sc, nexttbtt, intval);
sc->beacon.bmisscnt = 0;
ath9k_hw_set_interrupts(ah, ah->imask);
-
- /* FIXME: Handle properly when vif is NULL */
- if (vif && ah->caps.hw_caps & ATH9K_HW_CAP_VEOL)
- ath_beacon_start_adhoc(sc, vif);
}
void ath_beacon_config(struct ath_softc *sc, struct ieee80211_vif *vif)