iwlegacy: s/STATUS_/S_/
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c
index 17edbdf..f69211e 100644
--- a/drivers/net/wireless/iwlegacy/3945-mac.c
+++ b/drivers/net/wireless/iwlegacy/3945-mac.c
@@ -827,17 +827,17 @@
CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
il_scan_cancel(il);
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &il->status)))
+ if ((test_bit(S_RF_KILL_HW, &status) !=
+ test_bit(S_RF_KILL_HW, &il->status)))
wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
+ test_bit(S_RF_KILL_HW, &il->status));
else
wake_up(&il->wait_command_queue);
}
@@ -1537,7 +1537,7 @@
/* Re-enable all interrupts */
/* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &il->status))
+ if (test_bit(S_INT_ENABLED, &il->status))
il_enable_interrupts(il);
#ifdef CONFIG_IWLEGACY_DEBUG
@@ -2213,7 +2213,7 @@
D_INFO("RFKILL status: 0x%x\n", rfkill);
if (rfkill & 0x1) {
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
/* if RFKILL is not on, then wait for thermal
* sensor in adapter to kick in */
while (il3945_hw_get_temperature(il) == 0) {
@@ -2225,10 +2225,10 @@
D_INFO("Thermal calibration took %dus\n",
thermal_spin * 10);
} else
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
/* After the ALIVE response, we can send commands to 3945 uCode */
- set_bit(STATUS_ALIVE, &il->status);
+ set_bit(S_ALIVE, &il->status);
/* Enable watchdog to monitor the driver tx queues */
il_setup_watchdog(il);
@@ -2256,7 +2256,7 @@
/* Configure Bluetooth device coexistence support */
il_send_bt_config(il);
- set_bit(STATUS_READY, &il->status);
+ set_bit(S_READY, &il->status);
/* Configure the adapter for unassociated operation */
il3945_commit_rxon(il, ctx);
@@ -2283,9 +2283,9 @@
il_scan_cancel_timeout(il, 200);
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
+ exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
+ /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
* to prevent rearm timer */
del_timer_sync(&il->watchdog);
@@ -2300,7 +2300,7 @@
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &il->status);
+ clear_bit(S_EXIT_PENDING, &il->status);
/* stop and reset the on-board processor */
_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
@@ -2317,25 +2317,25 @@
/* If we have not previously called il3945_init() then
* clear all bits but the RF Kill bits and return */
if (!il_is_init(il)) {
- il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
+ il->status = test_bit(S_RF_KILL_HW, &il->status) <<
+ S_RF_KILL_HW |
+ test_bit(S_GEO_CONFIGURED, &il->status) <<
+ S_GEO_CONFIGURED |
+ test_bit(S_EXIT_PENDING, &il->status) <<
+ S_EXIT_PENDING;
goto exit;
}
/* ...otherwise clear out all the status bits but the RF Kill
* bit and continue taking the NIC down. */
- il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &il->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
+ il->status &= test_bit(S_RF_KILL_HW, &il->status) <<
+ S_RF_KILL_HW |
+ test_bit(S_GEO_CONFIGURED, &il->status) <<
+ S_GEO_CONFIGURED |
+ test_bit(S_FW_ERROR, &il->status) <<
+ S_FW_ERROR |
+ test_bit(S_EXIT_PENDING, &il->status) <<
+ S_EXIT_PENDING;
il3945_hw_txq_ctx_stop(il);
il3945_hw_rxq_stop(il);
@@ -2400,7 +2400,7 @@
if (rc)
return rc;
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
IL_WARN("Exit pending; will not bring the NIC up\n");
return -EIO;
}
@@ -2413,9 +2413,9 @@
/* If platform's RF_KILL switch is NOT set to KILL */
if (_il_rd(il, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
else {
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
IL_WARN("Radio disabled by HW RF Kill switch\n");
return -ENODEV;
}
@@ -2448,7 +2448,7 @@
il->ucode_data.len);
/* We return success when we resume from suspend and rf_kill is on. */
- if (test_bit(STATUS_RF_KILL_HW, &il->status))
+ if (test_bit(S_RF_KILL_HW, &il->status))
return 0;
for (i = 0; i < MAX_HW_RESTARTS; i++) {
@@ -2472,9 +2472,9 @@
return 0;
}
- set_bit(STATUS_EXIT_PENDING, &il->status);
+ set_bit(S_EXIT_PENDING, &il->status);
__il3945_down(il);
- clear_bit(STATUS_EXIT_PENDING, &il->status);
+ clear_bit(S_EXIT_PENDING, &il->status);
/* tried to restart and config the device for as long as our
* patience could withstand */
@@ -2495,7 +2495,7 @@
container_of(data, struct il_priv, init_alive_start.work);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
goto out;
il3945_init_alive_start(il);
@@ -2509,7 +2509,7 @@
container_of(data, struct il_priv, alive_start.work);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
goto out;
il3945_alive_start(il);
@@ -2527,15 +2527,15 @@
{
struct il_priv *il =
container_of(data, struct il_priv, _3945.rfkill_poll.work);
- bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &il->status);
+ bool old_rfkill = test_bit(S_RF_KILL_HW, &il->status);
bool new_rfkill = !(_il_rd(il, CSR_GP_CNTRL)
& CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
if (new_rfkill != old_rfkill) {
if (new_rfkill)
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
@@ -2682,10 +2682,10 @@
cmd.data = scan;
scan->len = cpu_to_le16(cmd.len);
- set_bit(STATUS_SCAN_HW, &il->status);
+ set_bit(S_SCAN_HW, &il->status);
ret = il_send_cmd_sync(il, &cmd);
if (ret)
- clear_bit(STATUS_SCAN_HW, &il->status);
+ clear_bit(S_SCAN_HW, &il->status);
return ret;
}
@@ -2705,10 +2705,10 @@
{
struct il_priv *il = container_of(data, struct il_priv, restart);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
- if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
+ if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
mutex_lock(&il->mutex);
il->ctx.vif = NULL;
il->is_open = 0;
@@ -2719,7 +2719,7 @@
il3945_down(il);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
mutex_unlock(&il->mutex);
return;
}
@@ -2735,7 +2735,7 @@
container_of(data, struct il_priv, rx_replenish);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
goto out;
il3945_rx_replenish(il);
@@ -2755,7 +2755,7 @@
D_ASSOC("Associated as %d to: %pM\n",
ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
il_scan_cancel_timeout(il, 200);
@@ -2847,10 +2847,10 @@
/* Wait for START_ALIVE from ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_timeout(il->wait_command_queue,
- test_bit(STATUS_READY, &il->status),
+ test_bit(S_READY, &il->status),
UCODE_READY_TIMEOUT);
if (!ret) {
- if (!test_bit(STATUS_READY, &il->status)) {
+ if (!test_bit(S_READY, &il->status)) {
IL_ERR(
"Wait for START_ALIVE timeout after %dms.\n",
jiffies_to_msecs(UCODE_READY_TIMEOUT));
@@ -2918,7 +2918,7 @@
struct ieee80211_vif *vif = ctx->vif;
int rc = 0;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
/* The following should be done only at AP bring up */
@@ -3870,7 +3870,7 @@
il_dbgfs_unregister(il);
- set_bit(STATUS_EXIT_PENDING, &il->status);
+ set_bit(S_EXIT_PENDING, &il->status);
il_leds_exit(il);
diff --git a/drivers/net/wireless/iwlegacy/3945.c b/drivers/net/wireless/iwlegacy/3945.c
index 17615c3..8ebd576 100644
--- a/drivers/net/wireless/iwlegacy/3945.c
+++ b/drivers/net/wireless/iwlegacy/3945.c
@@ -1008,7 +1008,7 @@
if (rc)
return rc;
- set_bit(STATUS_INIT, &il->status);
+ set_bit(S_INIT, &il->status);
return 0;
}
@@ -1394,7 +1394,7 @@
};
u16 chan;
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
+ if (WARN_ONCE(test_bit(S_SCAN_HW, &il->status),
"TX Power requested while scanning!\n"))
return -EAGAIN;
@@ -1571,7 +1571,7 @@
int temperature = il->temperature;
if (il->disable_tx_power_cal ||
- test_bit(STATUS_SCANNING, &il->status)) {
+ test_bit(S_SCANNING, &il->status)) {
/* do not perform tx power calibration */
return 0;
}
@@ -1726,7 +1726,7 @@
int rc = 0;
bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return -EINVAL;
if (!il_is_alive(il))
@@ -1885,7 +1885,7 @@
struct il_priv *il = container_of(work, struct il_priv,
_3945.thermal_periodic.work);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
mutex_lock(&il->mutex);
diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c
index ee084a8..c4198bd 100644
--- a/drivers/net/wireless/iwlegacy/4965-mac.c
+++ b/drivers/net/wireless/iwlegacy/4965-mac.c
@@ -90,7 +90,7 @@
{
if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
IL_ERR("Tx flush command to flush out all frames\n");
- if (!test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (!test_bit(S_EXIT_PENDING, &il->status))
queue_work(il->workqueue, &il->tx_flush);
}
}
@@ -246,7 +246,7 @@
} else
il4965_txq_ctx_reset(il);
- set_bit(STATUS_INIT, &il->status);
+ set_bit(S_INIT, &il->status);
return 0;
}
@@ -966,7 +966,7 @@
scan->tx_cmd.rate_n_flags = il4965_hw_set_rate_n_flags(rate, rate_flags);
/* In power save mode use one chain, otherwise use all chains */
- if (test_bit(STATUS_POWER_PMI, &il->status)) {
+ if (test_bit(S_POWER_PMI, &il->status)) {
/* rx_ant has been set to all valid chains previously */
active_chains = rx_ant &
((u8)(il->chain_noise_data.active_chains));
@@ -1010,11 +1010,11 @@
cmd.data = scan;
scan->len = cpu_to_le16(cmd.len);
- set_bit(STATUS_SCAN_HW, &il->status);
+ set_bit(S_SCAN_HW, &il->status);
ret = il_send_cmd_sync(il, &cmd);
if (ret)
- clear_bit(STATUS_SCAN_HW, &il->status);
+ clear_bit(S_SCAN_HW, &il->status);
return ret;
}
@@ -1120,7 +1120,7 @@
void il4965_set_rxon_chain(struct il_priv *il, struct il_rxon_context *ctx)
{
bool is_single = il4965_is_single_rx_stream(il);
- bool is_cam = !test_bit(STATUS_POWER_PMI, &il->status);
+ bool is_cam = !test_bit(S_POWER_PMI, &il->status);
u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
u32 active_chains;
u16 rx_chain;
@@ -1258,7 +1258,7 @@
le32_to_cpu(missed_beacon->total_missed_becons),
le32_to_cpu(missed_beacon->num_recvd_beacons),
le32_to_cpu(missed_beacon->num_expected_beacons));
- if (!test_bit(STATUS_SCANNING, &il->status))
+ if (!test_bit(S_SCANNING, &il->status))
il4965_init_sensitivity(il);
}
}
@@ -1378,7 +1378,7 @@
memcpy(&il->_4965.stats, &pkt->u.stats,
sizeof(il->_4965.stats));
- set_bit(STATUS_STATISTICS, &il->status);
+ set_bit(S_STATISTICS, &il->status);
/* Reschedule the stats timer to occur in
* REG_RECALIB_PERIOD seconds to ensure we get a
@@ -1387,7 +1387,7 @@
mod_timer(&il->stats_periodic, jiffies +
msecs_to_jiffies(REG_RECALIB_PERIOD * 1000));
- if (unlikely(!test_bit(STATUS_SCANNING, &il->status)) &&
+ if (unlikely(!test_bit(S_SCANNING, &il->status)) &&
(pkt->hdr.cmd == STATISTICS_NOTIFICATION)) {
il4965_rx_calc_noise(il);
queue_work(il->workqueue, &il->run_time_calib_work);
@@ -3809,7 +3809,7 @@
{
struct il_priv *il = (struct il_priv *)data;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
/* dont send host command if rf-kill is on */
@@ -3895,17 +3895,17 @@
il4965_perform_ct_kill_task(il);
if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
if (!(flags & RXON_CARD_DISABLED))
il_scan_cancel(il);
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &il->status)))
+ if ((test_bit(S_RF_KILL_HW, &status) !=
+ test_bit(S_RF_KILL_HW, &il->status)))
wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
+ test_bit(S_RF_KILL_HW, &il->status));
else
wake_up(&il->wait_command_queue);
}
@@ -4199,11 +4199,11 @@
* is killed. Hence update the killswitch state here. The
* rfkill handler will care about restarting if needed.
*/
- if (!test_bit(STATUS_ALIVE, &il->status)) {
+ if (!test_bit(S_ALIVE, &il->status)) {
if (hw_rf_kill)
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
}
@@ -4272,7 +4272,7 @@
/* Re-enable all interrupts */
/* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &il->status))
+ if (test_bit(S_INT_ENABLED, &il->status))
il_enable_interrupts(il);
/* Re-enable RF_KILL if it occurred */
else if (handled & CSR_INT_BIT_RF_KILL)
@@ -5079,7 +5079,7 @@
/* After the ALIVE response, we can send host commands to the uCode */
- set_bit(STATUS_ALIVE, &il->status);
+ set_bit(S_ALIVE, &il->status);
/* Enable watchdog to monitor the driver tx queues */
il_setup_watchdog(il);
@@ -5110,7 +5110,7 @@
il4965_reset_run_time_calib(il);
- set_bit(STATUS_READY, &il->status);
+ set_bit(S_READY, &il->status);
/* Configure the adapter for unassociated operation */
il_commit_rxon(il, ctx);
@@ -5141,9 +5141,9 @@
il_scan_cancel_timeout(il, 200);
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
+ exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
+ /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
* to prevent rearm timer */
del_timer_sync(&il->watchdog);
@@ -5157,7 +5157,7 @@
/* Wipe out the EXIT_PENDING status bit if we are not actually
* exiting the module */
if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &il->status);
+ clear_bit(S_EXIT_PENDING, &il->status);
/* stop and reset the on-board processor */
_il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
@@ -5174,25 +5174,25 @@
/* If we have not previously called il_init() then
* clear all bits but the RF Kill bit and return */
if (!il_is_init(il)) {
- il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
+ il->status = test_bit(S_RF_KILL_HW, &il->status) <<
+ S_RF_KILL_HW |
+ test_bit(S_GEO_CONFIGURED, &il->status) <<
+ S_GEO_CONFIGURED |
+ test_bit(S_EXIT_PENDING, &il->status) <<
+ S_EXIT_PENDING;
goto exit;
}
/* ...otherwise clear out all the status bits but the RF Kill
* bit and continue taking the NIC down. */
- il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &il->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
+ il->status &= test_bit(S_RF_KILL_HW, &il->status) <<
+ S_RF_KILL_HW |
+ test_bit(S_GEO_CONFIGURED, &il->status) <<
+ S_GEO_CONFIGURED |
+ test_bit(S_FW_ERROR, &il->status) <<
+ S_FW_ERROR |
+ test_bit(S_EXIT_PENDING, &il->status) <<
+ S_EXIT_PENDING;
il4965_txq_ctx_stop(il);
il4965_rxq_stop(il);
@@ -5283,7 +5283,7 @@
int i;
int ret;
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
IL_WARN("Exit pending; will not bring the NIC up\n");
return -EIO;
}
@@ -5309,9 +5309,9 @@
/* If platform's RF_KILL switch is NOT set to KILL */
if (_il_rd(il,
CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
else
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
if (il_is_rfkill(il)) {
wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
@@ -5372,9 +5372,9 @@
return 0;
}
- set_bit(STATUS_EXIT_PENDING, &il->status);
+ set_bit(S_EXIT_PENDING, &il->status);
__il4965_down(il);
- clear_bit(STATUS_EXIT_PENDING, &il->status);
+ clear_bit(S_EXIT_PENDING, &il->status);
/* tried to restart and config the device for as long as our
* patience could withstand */
@@ -5395,7 +5395,7 @@
container_of(data, struct il_priv, init_alive_start.work);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
goto out;
il->cfg->ops->lib->init_alive_start(il);
@@ -5409,7 +5409,7 @@
container_of(data, struct il_priv, alive_start.work);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
goto out;
il4965_alive_start(il);
@@ -5424,8 +5424,8 @@
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status)) {
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status)) {
mutex_unlock(&il->mutex);
return;
}
@@ -5444,10 +5444,10 @@
{
struct il_priv *il = container_of(data, struct il_priv, restart);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
- if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
+ if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
mutex_lock(&il->mutex);
il->ctx.vif = NULL;
il->is_open = 0;
@@ -5461,7 +5461,7 @@
il4965_down(il);
mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ if (test_bit(S_EXIT_PENDING, &il->status)) {
mutex_unlock(&il->mutex);
return;
}
@@ -5476,7 +5476,7 @@
struct il_priv *il =
container_of(data, struct il_priv, rx_replenish);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
mutex_lock(&il->mutex);
@@ -5582,10 +5582,10 @@
/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
* mac80211 will not be run successfully. */
ret = wait_event_timeout(il->wait_command_queue,
- test_bit(STATUS_READY, &il->status),
+ test_bit(S_READY, &il->status),
UCODE_READY_TIMEOUT);
if (!ret) {
- if (!test_bit(STATUS_READY, &il->status)) {
+ if (!test_bit(S_READY, &il->status)) {
IL_ERR("START_ALIVE timeout after %dms.\n",
jiffies_to_msecs(UCODE_READY_TIMEOUT));
return -ETIMEDOUT;
@@ -5751,7 +5751,7 @@
case IEEE80211_AMPDU_RX_STOP:
D_HT("stop Rx\n");
ret = il4965_sta_rx_agg_stop(il, sta, tid);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
ret = 0;
break;
case IEEE80211_AMPDU_TX_START:
@@ -5761,7 +5761,7 @@
case IEEE80211_AMPDU_TX_STOP:
D_HT("stop Tx\n");
ret = il4965_tx_agg_stop(il, vif, sta, tid);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
ret = 0;
break;
case IEEE80211_AMPDU_TX_OPERATIONAL:
@@ -5833,9 +5833,9 @@
if (il_is_rfkill(il))
goto out;
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status) ||
- test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status) ||
+ test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
goto out;
if (!il_is_associated_ctx(ctx))
@@ -5891,10 +5891,10 @@
* at this point, staging_rxon has the
* configuration for channel switch
*/
- set_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
+ set_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
il->switch_channel = cpu_to_le16(ch);
if (il->cfg->ops->lib->set_channel_switch(il, ch_switch)) {
- clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
+ clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
il->switch_channel = 0;
ieee80211_chswitch_done(ctx->vif, false);
}
@@ -5968,8 +5968,8 @@
* then just return; the stats notification will
* kick off another scheduled work to compensate for
* any temperature delta we missed here. */
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status) ||
+ test_bit(S_SCANNING, &il->status))
goto out;
/* Regardless of if we are associated, we must reconfigure the
@@ -6376,12 +6376,12 @@
/* If platform's RF_KILL switch is NOT set to KILL */
if (_il_rd(il, CSR_GP_CNTRL) &
CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
else
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
+ test_bit(S_RF_KILL_HW, &il->status));
il_power_initialize(il);
@@ -6433,9 +6433,9 @@
/* ieee80211_unregister_hw call wil cause il_mac_stop to
* to be called and il4965_down since we are removing the device
- * we need to set STATUS_EXIT_PENDING bit.
+ * we need to set S_EXIT_PENDING bit.
*/
- set_bit(STATUS_EXIT_PENDING, &il->status);
+ set_bit(S_EXIT_PENDING, &il->status);
il_leds_exit(il);
diff --git a/drivers/net/wireless/iwlegacy/4965.c b/drivers/net/wireless/iwlegacy/4965.c
index 8199e63..1efe824 100644
--- a/drivers/net/wireless/iwlegacy/4965.c
+++ b/drivers/net/wireless/iwlegacy/4965.c
@@ -1349,7 +1349,7 @@
u8 ctrl_chan_high = 0;
struct il_rxon_context *ctx = &il->ctx;
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
+ if (WARN_ONCE(test_bit(S_SCAN_HW, &il->status),
"TX Power requested while scanning!\n"))
return -EAGAIN;
@@ -1441,7 +1441,7 @@
* receive commit_rxon request
* abort any previous channel switch if still in process
*/
- if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status) &&
+ if (test_bit(S_CHANNEL_SWITCH_PENDING, &il->status) &&
il->switch_channel != ctx->staging.channel) {
D_11H("abort channel switch on %d\n",
le16_to_cpu(il->switch_channel));
@@ -1673,7 +1673,7 @@
s32 R1, R2, R3;
u32 R4;
- if (test_bit(STATUS_TEMPERATURE, &il->status) &&
+ if (test_bit(S_TEMPERATURE, &il->status) &&
(il->_4965.stats.flag &
STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
D_TEMP("Running HT40 temperature calibration\n");
@@ -1696,7 +1696,7 @@
* with an updated temperature, use R4 provided to us in the
* "initialize" ALIVE response.
*/
- if (!test_bit(STATUS_TEMPERATURE, &il->status))
+ if (!test_bit(S_TEMPERATURE, &il->status))
vt = sign_extend32(R4, 23);
else
vt = sign_extend32(le32_to_cpu(il->_4965.stats.
@@ -1737,7 +1737,7 @@
{
int temp_diff;
- if (!test_bit(STATUS_STATISTICS, &il->status)) {
+ if (!test_bit(S_STATISTICS, &il->status)) {
D_TEMP("Temperature not updated -- no stats.\n");
return 0;
}
@@ -1784,10 +1784,10 @@
}
il->temperature = temp;
- set_bit(STATUS_TEMPERATURE, &il->status);
+ set_bit(S_TEMPERATURE, &il->status);
if (!il->disable_tx_power_cal &&
- unlikely(!test_bit(STATUS_SCANNING, &il->status)) &&
+ unlikely(!test_bit(S_SCANNING, &il->status)) &&
il4965_is_temp_calib_needed(il))
queue_work(il->workqueue, &il->txpower_work);
}
@@ -2179,7 +2179,7 @@
if (!vif || !il->is_open)
return;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
il_scan_cancel_timeout(il, 200);
@@ -2254,7 +2254,7 @@
lockdep_assert_held(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
/* The following should be done only at AP bring up */
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index bd222f5..ba7ee4b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -165,7 +165,7 @@
if (il->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
il->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
D_INFO("Geography modes already initialized.\n");
- set_bit(STATUS_GEO_CONFIGURED, &il->status);
+ set_bit(S_GEO_CONFIGURED, &il->status);
return 0;
}
@@ -264,7 +264,7 @@
il->bands[IEEE80211_BAND_2GHZ].n_channels,
il->bands[IEEE80211_BAND_5GHZ].n_channels);
- set_bit(STATUS_GEO_CONFIGURED, &il->status);
+ set_bit(S_GEO_CONFIGURED, &il->status);
return 0;
}
@@ -277,7 +277,7 @@
{
kfree(il->ieee_channels);
kfree(il->ieee_rates);
- clear_bit(STATUS_GEO_CONFIGURED, &il->status);
+ clear_bit(S_GEO_CONFIGURED, &il->status);
}
EXPORT_SYMBOL(il_free_geos);
@@ -839,10 +839,10 @@
{
struct il_rxon_context *ctx = &il->ctx;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
- if (test_and_clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status))
+ if (test_and_clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
ieee80211_chswitch_done(ctx->vif, is_success);
}
EXPORT_SYMBOL(il_chswitch_done);
@@ -855,7 +855,7 @@
struct il_rxon_context *ctx = &il->ctx;
struct il_rxon_cmd *rxon = (void *)&ctx->active;
- if (!test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status))
+ if (!test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
return;
if (!le32_to_cpu(csa->status) && csa->channel == il->switch_channel) {
@@ -903,10 +903,10 @@
void il_irq_handle_error(struct il_priv *il)
{
/* Set the FW error flag -- cleared on il_down */
- set_bit(STATUS_FW_ERROR, &il->status);
+ set_bit(S_FW_ERROR, &il->status);
/* Cancel currently queued command. */
- clear_bit(STATUS_HCMD_ACTIVE, &il->status);
+ clear_bit(S_HCMD_ACTIVE, &il->status);
IL_ERR("Loaded firmware version: %s\n",
il->hw->wiphy->fw_version);
@@ -924,9 +924,9 @@
/* Keep the restart process from trying to send host
* commands by clearing the INIT status bit */
- clear_bit(STATUS_READY, &il->status);
+ clear_bit(S_READY, &il->status);
- if (!test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ if (!test_bit(S_EXIT_PENDING, &il->status)) {
IL_DBG(IL_DL_FW_ERRORS,
"Restarting adapter due to uCode error.\n");
@@ -1127,7 +1127,7 @@
il->tx_power_next = tx_power;
/* do not set tx power when scanning or channel changing */
- defer = test_bit(STATUS_SCANNING, &il->status) ||
+ defer = test_bit(S_SCANNING, &il->status) ||
memcmp(&ctx->active, &ctx->staging, sizeof(ctx->staging));
if (defer && !force) {
D_INFO("Deferring tx power set\n");
@@ -1678,7 +1678,7 @@
{
struct il_force_reset *force_reset;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return -EINVAL;
force_reset = &il->force_reset;
@@ -1713,13 +1713,13 @@
IL_ERR("On demand firmware reload\n");
/* Set the FW error flag -- cleared on il_down */
- set_bit(STATUS_FW_ERROR, &il->status);
+ set_bit(S_FW_ERROR, &il->status);
wake_up(&il->wait_command_queue);
/*
* Keep the restart process from trying to send host
* commands by clearing the INIT status bit
*/
- clear_bit(STATUS_READY, &il->status);
+ clear_bit(S_READY, &il->status);
queue_work(il->workqueue, &il->restart);
return 0;
@@ -1826,7 +1826,7 @@
int cnt;
unsigned long timeout;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
timeout = il->cfg->base_params->wd_timeout;
@@ -1960,9 +1960,9 @@
hw_rfkill = true;
if (hw_rfkill)
- set_bit(STATUS_RF_KILL_HW, &il->status);
+ set_bit(S_RF_KILL_HW, &il->status);
else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
+ clear_bit(S_RF_KILL_HW, &il->status);
wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rfkill);
@@ -1985,7 +1985,7 @@
static void
il_update_qos(struct il_priv *il, struct il_rxon_context *ctx)
{
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return;
if (!ctx->is_active)
@@ -2034,7 +2034,7 @@
D_MAC80211("enter to channel %d changed 0x%X\n",
channel->hw_value, changed);
- if (unlikely(test_bit(STATUS_SCANNING, &il->status))) {
+ if (unlikely(test_bit(S_SCANNING, &il->status))) {
scan_active = 1;
D_MAC80211("scan active\n");
}
@@ -2566,7 +2566,7 @@
none:
/* re-enable interrupts here since we don't have anything to service. */
/* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &il->status))
+ if (test_bit(S_INT_ENABLED, &il->status))
il_enable_interrupts(il);
spin_unlock_irqrestore(&il->lock, flags);
return IRQ_NONE;
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.h b/drivers/net/wireless/iwlegacy/iwl-core.h
index 8333761..5b2883f 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.h
+++ b/drivers/net/wireless/iwlegacy/iwl-core.h
@@ -533,47 +533,47 @@
/*************** DRIVER STATUS FUNCTIONS *****/
-#define STATUS_HCMD_ACTIVE 0 /* host command in progress */
-/* 1 is unused (used to be STATUS_HCMD_SYNC_ACTIVE) */
-#define STATUS_INT_ENABLED 2
-#define STATUS_RF_KILL_HW 3
-#define STATUS_CT_KILL 4
-#define STATUS_INIT 5
-#define STATUS_ALIVE 6
-#define STATUS_READY 7
-#define STATUS_TEMPERATURE 8
-#define STATUS_GEO_CONFIGURED 9
-#define STATUS_EXIT_PENDING 10
-#define STATUS_STATISTICS 12
-#define STATUS_SCANNING 13
-#define STATUS_SCAN_ABORTING 14
-#define STATUS_SCAN_HW 15
-#define STATUS_POWER_PMI 16
-#define STATUS_FW_ERROR 17
-#define STATUS_CHANNEL_SWITCH_PENDING 18
+#define S_HCMD_ACTIVE 0 /* host command in progress */
+/* 1 is unused (used to be S_HCMD_SYNC_ACTIVE) */
+#define S_INT_ENABLED 2
+#define S_RF_KILL_HW 3
+#define S_CT_KILL 4
+#define S_INIT 5
+#define S_ALIVE 6
+#define S_READY 7
+#define S_TEMPERATURE 8
+#define S_GEO_CONFIGURED 9
+#define S_EXIT_PENDING 10
+#define S_STATISTICS 12
+#define S_SCANNING 13
+#define S_SCAN_ABORTING 14
+#define S_SCAN_HW 15
+#define S_POWER_PMI 16
+#define S_FW_ERROR 17
+#define S_CHANNEL_SWITCH_PENDING 18
static inline int il_is_ready(struct il_priv *il)
{
/* The adapter is 'ready' if READY and GEO_CONFIGURED bits are
* set but EXIT_PENDING is not */
- return test_bit(STATUS_READY, &il->status) &&
- test_bit(STATUS_GEO_CONFIGURED, &il->status) &&
- !test_bit(STATUS_EXIT_PENDING, &il->status);
+ return test_bit(S_READY, &il->status) &&
+ test_bit(S_GEO_CONFIGURED, &il->status) &&
+ !test_bit(S_EXIT_PENDING, &il->status);
}
static inline int il_is_alive(struct il_priv *il)
{
- return test_bit(STATUS_ALIVE, &il->status);
+ return test_bit(S_ALIVE, &il->status);
}
static inline int il_is_init(struct il_priv *il)
{
- return test_bit(STATUS_INIT, &il->status);
+ return test_bit(S_INIT, &il->status);
}
static inline int il_is_rfkill_hw(struct il_priv *il)
{
- return test_bit(STATUS_RF_KILL_HW, &il->status);
+ return test_bit(S_RF_KILL_HW, &il->status);
}
static inline int il_is_rfkill(struct il_priv *il)
@@ -583,7 +583,7 @@
static inline int il_is_ctkill(struct il_priv *il)
{
- return test_bit(STATUS_CT_KILL, &il->status);
+ return test_bit(S_CT_KILL, &il->status);
}
static inline int il_is_ready_rf(struct il_priv *il)
diff --git a/drivers/net/wireless/iwlegacy/iwl-debugfs.c b/drivers/net/wireless/iwlegacy/iwl-debugfs.c
index 8448db7..114922b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-debugfs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-debugfs.c
@@ -402,7 +402,7 @@
char *buf;
ssize_t ret;
- if (!test_bit(STATUS_GEO_CONFIGURED, &il->status))
+ if (!test_bit(S_GEO_CONFIGURED, &il->status))
return -EAGAIN;
buf = kzalloc(bufsz, GFP_KERNEL);
@@ -471,38 +471,38 @@
int pos = 0;
const size_t bufsz = sizeof(buf);
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_HCMD_ACTIVE:\t %d\n",
- test_bit(STATUS_HCMD_ACTIVE, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INT_ENABLED:\t %d\n",
- test_bit(STATUS_INT_ENABLED, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_RF_KILL_HW:\t %d\n",
- test_bit(STATUS_RF_KILL_HW, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_CT_KILL:\t\t %d\n",
- test_bit(STATUS_CT_KILL, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_INIT:\t\t %d\n",
- test_bit(STATUS_INIT, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_ALIVE:\t\t %d\n",
- test_bit(STATUS_ALIVE, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_READY:\t\t %d\n",
- test_bit(STATUS_READY, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_TEMPERATURE:\t %d\n",
- test_bit(STATUS_TEMPERATURE, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_GEO_CONFIGURED:\t %d\n",
- test_bit(STATUS_GEO_CONFIGURED, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_EXIT_PENDING:\t %d\n",
- test_bit(STATUS_EXIT_PENDING, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_STATISTICS:\t %d\n",
- test_bit(STATUS_STATISTICS, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCANNING:\t %d\n",
- test_bit(STATUS_SCANNING, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_ABORTING:\t %d\n",
- test_bit(STATUS_SCAN_ABORTING, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_SCAN_HW:\t\t %d\n",
- test_bit(STATUS_SCAN_HW, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_POWER_PMI:\t %d\n",
- test_bit(STATUS_POWER_PMI, &il->status));
- pos += scnprintf(buf + pos, bufsz - pos, "STATUS_FW_ERROR:\t %d\n",
- test_bit(STATUS_FW_ERROR, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_HCMD_ACTIVE:\t %d\n",
+ test_bit(S_HCMD_ACTIVE, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_INT_ENABLED:\t %d\n",
+ test_bit(S_INT_ENABLED, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_RF_KILL_HW:\t %d\n",
+ test_bit(S_RF_KILL_HW, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_CT_KILL:\t\t %d\n",
+ test_bit(S_CT_KILL, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_INIT:\t\t %d\n",
+ test_bit(S_INIT, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_ALIVE:\t\t %d\n",
+ test_bit(S_ALIVE, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_READY:\t\t %d\n",
+ test_bit(S_READY, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_TEMPERATURE:\t %d\n",
+ test_bit(S_TEMPERATURE, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_GEO_CONFIGURED:\t %d\n",
+ test_bit(S_GEO_CONFIGURED, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_EXIT_PENDING:\t %d\n",
+ test_bit(S_EXIT_PENDING, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_STATISTICS:\t %d\n",
+ test_bit(S_STATISTICS, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_SCANNING:\t %d\n",
+ test_bit(S_SCANNING, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_SCAN_ABORTING:\t %d\n",
+ test_bit(S_SCAN_ABORTING, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_SCAN_HW:\t\t %d\n",
+ test_bit(S_SCAN_HW, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_POWER_PMI:\t %d\n",
+ test_bit(S_POWER_PMI, &il->status));
+ pos += scnprintf(buf + pos, bufsz - pos, "S_FW_ERROR:\t %d\n",
+ test_bit(S_FW_ERROR, &il->status));
return simple_read_from_buffer(user_buf, count, ppos, buf, pos);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
index 0b11f2f..4762a0e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
@@ -128,7 +128,7 @@
if (!cmd->callback)
cmd->callback = il_generic_cmd_callback;
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (test_bit(S_EXIT_PENDING, &il->status))
return -EBUSY;
ret = il_enqueue_hcmd(il, cmd);
@@ -155,7 +155,7 @@
D_INFO("Attempting to send sync command %s\n",
il_get_cmd_string(cmd->id));
- set_bit(STATUS_HCMD_ACTIVE, &il->status);
+ set_bit(S_HCMD_ACTIVE, &il->status);
D_INFO("Setting HCMD_ACTIVE for command %s\n",
il_get_cmd_string(cmd->id));
@@ -168,16 +168,16 @@
}
ret = wait_event_timeout(il->wait_command_queue,
- !test_bit(STATUS_HCMD_ACTIVE, &il->status),
+ !test_bit(S_HCMD_ACTIVE, &il->status),
HOST_COMPLETE_TIMEOUT);
if (!ret) {
- if (test_bit(STATUS_HCMD_ACTIVE, &il->status)) {
+ if (test_bit(S_HCMD_ACTIVE, &il->status)) {
IL_ERR(
"Error sending %s: time out after %dms.\n",
il_get_cmd_string(cmd->id),
jiffies_to_msecs(HOST_COMPLETE_TIMEOUT));
- clear_bit(STATUS_HCMD_ACTIVE, &il->status);
+ clear_bit(S_HCMD_ACTIVE, &il->status);
D_INFO(
"Clearing HCMD_ACTIVE for command %s\n",
il_get_cmd_string(cmd->id));
@@ -186,13 +186,13 @@
}
}
- if (test_bit(STATUS_RF_KILL_HW, &il->status)) {
+ if (test_bit(S_RF_KILL_HW, &il->status)) {
IL_ERR("Command %s aborted: RF KILL Switch\n",
il_get_cmd_string(cmd->id));
ret = -ECANCELED;
goto fail;
}
- if (test_bit(STATUS_FW_ERROR, &il->status)) {
+ if (test_bit(S_FW_ERROR, &il->status)) {
IL_ERR("Command %s failed: FW Error\n",
il_get_cmd_string(cmd->id));
ret = -EIO;
diff --git a/drivers/net/wireless/iwlegacy/iwl-helpers.h b/drivers/net/wireless/iwlegacy/iwl-helpers.h
index 5fcb23e..0e64003 100644
--- a/drivers/net/wireless/iwlegacy/iwl-helpers.h
+++ b/drivers/net/wireless/iwlegacy/iwl-helpers.h
@@ -146,7 +146,7 @@
static inline void il_disable_interrupts(struct il_priv *il)
{
- clear_bit(STATUS_INT_ENABLED, &il->status);
+ clear_bit(S_INT_ENABLED, &il->status);
/* disable interrupts from uCode/NIC to host */
_il_wr(il, CSR_INT_MASK, 0x00000000);
@@ -167,7 +167,7 @@
static inline void il_enable_interrupts(struct il_priv *il)
{
D_ISR("Enabling interrupts\n");
- set_bit(STATUS_INT_ENABLED, &il->status);
+ set_bit(S_INT_ENABLED, &il->status);
_il_wr(il, CSR_INT_MASK, il->inta_mask);
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-led.c b/drivers/net/wireless/iwlegacy/iwl-led.c
index 3652cdc..a840c2e 100644
--- a/drivers/net/wireless/iwlegacy/iwl-led.c
+++ b/drivers/net/wireless/iwlegacy/iwl-led.c
@@ -107,7 +107,7 @@
};
int ret;
- if (!test_bit(STATUS_READY, &il->status))
+ if (!test_bit(S_READY, &il->status))
return -EBUSY;
if (il->blink_on == on && il->blink_off == off)
diff --git a/drivers/net/wireless/iwlegacy/iwl-power.c b/drivers/net/wireless/iwlegacy/iwl-power.c
index 051623a..c66a0f7 100644
--- a/drivers/net/wireless/iwlegacy/iwl-power.c
+++ b/drivers/net/wireless/iwlegacy/iwl-power.c
@@ -113,18 +113,18 @@
/* scan complete use sleep_power_next, need to be updated */
memcpy(&il->power_data.sleep_cmd_next, cmd, sizeof(*cmd));
- if (test_bit(STATUS_SCANNING, &il->status) && !force) {
+ if (test_bit(S_SCANNING, &il->status) && !force) {
D_INFO("Defer power set mode while scanning\n");
return 0;
}
if (cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK)
- set_bit(STATUS_POWER_PMI, &il->status);
+ set_bit(S_POWER_PMI, &il->status);
ret = il_set_power(il, cmd);
if (!ret) {
if (!(cmd->flags & IL_POWER_DRIVER_ALLOW_SLEEP_MSK))
- clear_bit(STATUS_POWER_PMI, &il->status);
+ clear_bit(S_POWER_PMI, &il->status);
if (il->cfg->ops->lib->update_chain_flags && update_chains)
il->cfg->ops->lib->update_chain_flags(il);
diff --git a/drivers/net/wireless/iwlegacy/iwl-rx.c b/drivers/net/wireless/iwlegacy/iwl-rx.c
index 58d19c1..76f2361 100644
--- a/drivers/net/wireless/iwlegacy/iwl-rx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-rx.c
@@ -137,7 +137,7 @@
goto exit_unlock;
/* If power-saving is in use, make sure device is awake */
- if (test_bit(STATUS_POWER_PMI, &il->status)) {
+ if (test_bit(S_POWER_PMI, &il->status)) {
reg = _il_rd(il, CSR_UCODE_DRV_GP1);
if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
diff --git a/drivers/net/wireless/iwlegacy/iwl-scan.c b/drivers/net/wireless/iwlegacy/iwl-scan.c
index 18226d1..6d20f2b 100644
--- a/drivers/net/wireless/iwlegacy/iwl-scan.c
+++ b/drivers/net/wireless/iwlegacy/iwl-scan.c
@@ -66,11 +66,11 @@
/* Exit instantly with error when device is not ready
* to receive scan abort command or it does not perform
* hardware scan currently */
- if (!test_bit(STATUS_READY, &il->status) ||
- !test_bit(STATUS_GEO_CONFIGURED, &il->status) ||
- !test_bit(STATUS_SCAN_HW, &il->status) ||
- test_bit(STATUS_FW_ERROR, &il->status) ||
- test_bit(STATUS_EXIT_PENDING, &il->status))
+ if (!test_bit(S_READY, &il->status) ||
+ !test_bit(S_GEO_CONFIGURED, &il->status) ||
+ !test_bit(S_SCAN_HW, &il->status) ||
+ test_bit(S_FW_ERROR, &il->status) ||
+ test_bit(S_EXIT_PENDING, &il->status))
return -EIO;
ret = il_send_cmd_sync(il, &cmd);
@@ -109,15 +109,15 @@
{
lockdep_assert_held(&il->mutex);
- if (!test_bit(STATUS_SCANNING, &il->status)) {
+ if (!test_bit(S_SCANNING, &il->status)) {
D_SCAN("Forcing scan end while not scanning\n");
return;
}
D_SCAN("Forcing scan end\n");
- clear_bit(STATUS_SCANNING, &il->status);
- clear_bit(STATUS_SCAN_HW, &il->status);
- clear_bit(STATUS_SCAN_ABORTING, &il->status);
+ clear_bit(S_SCANNING, &il->status);
+ clear_bit(S_SCAN_HW, &il->status);
+ clear_bit(S_SCAN_ABORTING, &il->status);
il_complete_scan(il, true);
}
@@ -127,12 +127,12 @@
lockdep_assert_held(&il->mutex);
- if (!test_bit(STATUS_SCANNING, &il->status)) {
+ if (!test_bit(S_SCANNING, &il->status)) {
D_SCAN("Not performing scan to abort\n");
return;
}
- if (test_and_set_bit(STATUS_SCAN_ABORTING, &il->status)) {
+ if (test_and_set_bit(S_SCAN_ABORTING, &il->status)) {
D_SCAN("Scan abort in progress\n");
return;
}
@@ -172,12 +172,12 @@
il_do_scan_abort(il);
while (time_before_eq(jiffies, timeout)) {
- if (!test_bit(STATUS_SCAN_HW, &il->status))
+ if (!test_bit(S_SCAN_HW, &il->status))
break;
msleep(20);
}
- return test_bit(STATUS_SCAN_HW, &il->status);
+ return test_bit(S_SCAN_HW, &il->status);
}
EXPORT_SYMBOL(il_scan_cancel_timeout);
@@ -251,7 +251,7 @@
scan_notif->tsf_high, scan_notif->status);
/* The HW is no longer scanning */
- clear_bit(STATUS_SCAN_HW, &il->status);
+ clear_bit(S_SCAN_HW, &il->status);
D_SCAN("Scan on %sGHz took %dms\n",
(il->scan_band == IEEE80211_BAND_2GHZ) ? "2.4" : "5.2",
@@ -341,25 +341,25 @@
return -EIO;
}
- if (test_bit(STATUS_SCAN_HW, &il->status)) {
+ if (test_bit(S_SCAN_HW, &il->status)) {
D_SCAN(
"Multiple concurrent scan requests in parallel.\n");
return -EBUSY;
}
- if (test_bit(STATUS_SCAN_ABORTING, &il->status)) {
+ if (test_bit(S_SCAN_ABORTING, &il->status)) {
D_SCAN("Scan request while abort pending.\n");
return -EBUSY;
}
D_SCAN("Starting scan...\n");
- set_bit(STATUS_SCANNING, &il->status);
+ set_bit(S_SCANNING, &il->status);
il->scan_start = jiffies;
ret = il->cfg->ops->utils->request_scan(il, vif);
if (ret) {
- clear_bit(STATUS_SCANNING, &il->status);
+ clear_bit(S_SCANNING, &il->status);
return ret;
}
@@ -383,7 +383,7 @@
mutex_lock(&il->mutex);
- if (test_bit(STATUS_SCANNING, &il->status)) {
+ if (test_bit(S_SCANNING, &il->status)) {
D_SCAN("Scan already in progress.\n");
ret = -EAGAIN;
goto out_unlock;
@@ -494,11 +494,11 @@
mutex_lock(&il->mutex);
- aborted = test_and_clear_bit(STATUS_SCAN_ABORTING, &il->status);
+ aborted = test_and_clear_bit(S_SCAN_ABORTING, &il->status);
if (aborted)
D_SCAN("Aborted scan completed.\n");
- if (!test_and_clear_bit(STATUS_SCANNING, &il->status)) {
+ if (!test_and_clear_bit(S_SCANNING, &il->status)) {
D_SCAN("Scan already completed.\n");
goto out_settings;
}
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
index e46e588..3f97d09 100644
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-tx.c
@@ -51,7 +51,7 @@
return;
/* if we're trying to save power */
- if (test_bit(STATUS_POWER_PMI, &il->status)) {
+ if (test_bit(S_POWER_PMI, &il->status)) {
/* wake up nic if it's powered down ...
* uCode will wake up, and interrupt us again, so next
* time we'll skip this part. */
@@ -641,7 +641,7 @@
il_hcmd_queue_reclaim(il, txq_id, idx, cmd_idx);
if (!(meta->flags & CMD_ASYNC)) {
- clear_bit(STATUS_HCMD_ACTIVE, &il->status);
+ clear_bit(S_HCMD_ACTIVE, &il->status);
D_INFO("Clearing HCMD_ACTIVE for command %s\n",
il_get_cmd_string(cmd->hdr.cmd));
wake_up(&il->wait_command_queue);