[SCSI] lpfc 8.3.39: Fixed BlockGuard to take advantage of rdprotect/wrprotect info when available
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index be11bb9..44995de 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -68,6 +68,10 @@
__be32 ref_tag; /* Target LBA or indirect LBA */
};
+#if !defined(SCSI_PROT_GUARD_CHECK) || !defined(SCSI_PROT_REF_CHECK)
+#define scsi_prot_flagged(sc, flg) sc
+#endif
+
static void
lpfc_release_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb);
static void
@@ -2066,9 +2070,21 @@
bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
+
+ /*
+ * We only need to check the data on READs, for WRITEs
+ * protection data is automatically generated, not checked.
+ */
if (datadir == DMA_FROM_DEVICE) {
- bf_set(pde6_ce, pde6, checking);
- bf_set(pde6_re, pde6, checking);
+ if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+ bf_set(pde6_ce, pde6, checking);
+ else
+ bf_set(pde6_ce, pde6, 0);
+
+ if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+ bf_set(pde6_re, pde6, checking);
+ else
+ bf_set(pde6_re, pde6, 0);
}
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
@@ -2221,8 +2237,17 @@
bf_set(pde6_type, pde6, LPFC_PDE6_DESCRIPTOR);
bf_set(pde6_optx, pde6, txop);
bf_set(pde6_oprx, pde6, rxop);
- bf_set(pde6_ce, pde6, checking);
- bf_set(pde6_re, pde6, checking);
+
+ if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+ bf_set(pde6_ce, pde6, checking);
+ else
+ bf_set(pde6_ce, pde6, 0);
+
+ if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+ bf_set(pde6_re, pde6, checking);
+ else
+ bf_set(pde6_re, pde6, 0);
+
bf_set(pde6_ai, pde6, 1);
bf_set(pde6_ae, pde6, 0);
bf_set(pde6_apptagval, pde6, 0);
@@ -2385,7 +2410,6 @@
struct sli4_sge_diseed *diseed = NULL;
dma_addr_t physaddr;
int i = 0, num_sge = 0, status;
- int datadir = sc->sc_data_direction;
uint32_t reftag;
unsigned blksize;
uint8_t txop, rxop;
@@ -2423,13 +2447,26 @@
diseed->ref_tag = cpu_to_le32(reftag);
diseed->ref_tag_tran = diseed->ref_tag;
+ /*
+ * We only need to check the data on READs, for WRITEs
+ * protection data is automatically generated, not checked.
+ */
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK))
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+ else
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
+
+ if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+ bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+ else
+ bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
+ }
+
/* setup DISEED with the rest of the info */
bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
- if (datadir == DMA_FROM_DEVICE) {
- bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
- bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
- }
+
bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
@@ -2571,11 +2608,34 @@
diseed->ref_tag = cpu_to_le32(reftag);
diseed->ref_tag_tran = diseed->ref_tag;
+ if (scsi_prot_flagged(sc, SCSI_PROT_GUARD_CHECK)) {
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
+
+ } else {
+ bf_set(lpfc_sli4_sge_dif_ce, diseed, 0);
+ /*
+ * When in this mode, the hardware will replace
+ * the guard tag from the host with a
+ * newly generated good CRC for the wire.
+ * Switch to raw mode here to avoid this
+ * behavior. What the host sends gets put on the wire.
+ */
+ if (txop == BG_OP_IN_CRC_OUT_CRC) {
+ txop = BG_OP_RAW_MODE;
+ rxop = BG_OP_RAW_MODE;
+ }
+ }
+
+
+ if (scsi_prot_flagged(sc, SCSI_PROT_REF_CHECK))
+ bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+ else
+ bf_set(lpfc_sli4_sge_dif_re, diseed, 0);
+
/* setup DISEED with the rest of the info */
bf_set(lpfc_sli4_sge_dif_optx, diseed, txop);
bf_set(lpfc_sli4_sge_dif_oprx, diseed, rxop);
- bf_set(lpfc_sli4_sge_dif_ce, diseed, checking);
- bf_set(lpfc_sli4_sge_dif_re, diseed, checking);
+
bf_set(lpfc_sli4_sge_dif_ai, diseed, 1);
bf_set(lpfc_sli4_sge_dif_me, diseed, 0);
@@ -2739,6 +2799,47 @@
}
/**
+ * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
+ * @phba: The Hba for which this call is being executed.
+ * @lpfc_cmd: The scsi buffer which is going to be adjusted.
+ *
+ * Adjust the data length to account for how much data
+ * is actually on the wire.
+ *
+ * returns the adjusted data length
+ **/
+static int
+lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
+ struct lpfc_scsi_buf *lpfc_cmd)
+{
+ struct scsi_cmnd *sc = lpfc_cmd->pCmd;
+ int fcpdl;
+
+ fcpdl = scsi_bufflen(sc);
+
+ /* Check if there is protection data on the wire */
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ /* Read */
+ if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
+ return fcpdl;
+
+ } else {
+ /* Write */
+ if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
+ return fcpdl;
+ }
+
+ /*
+ * If we are in DIF Type 1 mode every data block has a 8 byte
+ * DIF (trailer) attached to it. Must ajust FCP data length.
+ */
+ if (scsi_prot_flagged(sc, SCSI_PROT_TRANSFER_PI))
+ fcpdl += (fcpdl / lpfc_cmd_blksize(sc)) * 8;
+
+ return fcpdl;
+}
+
+/**
* lpfc_bg_scsi_prep_dma_buf_s3 - DMA mapping for scsi buffer to SLI3 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be prep'ed.
@@ -2758,8 +2859,7 @@
uint32_t num_bde = 0;
int datasegcnt, protsegcnt, datadir = scsi_cmnd->sc_data_direction;
int prot_group_type = 0;
- int diflen, fcpdl;
- unsigned blksize;
+ int fcpdl;
/*
* Start the lpfc command prep by bumping the bpl beyond fcp_cmnd
@@ -2856,18 +2956,7 @@
iocb_cmd->ulpBdeCount = 1;
iocb_cmd->ulpLe = 1;
- fcpdl = scsi_bufflen(scsi_cmnd);
-
- if (scsi_get_prot_type(scsi_cmnd) == SCSI_PROT_DIF_TYPE1) {
- /*
- * We are in DIF Type 1 mode
- * Every data block has a 8 byte DIF (trailer)
- * attached to it. Must ajust FCP data length
- */
- blksize = lpfc_cmd_blksize(scsi_cmnd);
- diflen = (fcpdl / blksize) * 8;
- fcpdl += diflen;
- }
+ fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
/*
@@ -2982,7 +3071,7 @@
chk_guard = 1;
guard_type = scsi_host_get_guard(cmd->device->host);
- start_ref_tag = scsi_get_lba(cmd);
+ start_ref_tag = (uint32_t)scsi_get_lba(cmd); /* Truncate LBA */
start_app_tag = src->app_tag;
src = (struct scsi_dif_tuple *)sg_virt(sgpe);
len = sgpe->length;
@@ -3398,45 +3487,6 @@
}
/**
- * lpfc_bg_scsi_adjust_dl - Adjust SCSI data length for BlockGuard
- * @phba: The Hba for which this call is being executed.
- * @lpfc_cmd: The scsi buffer which is going to be adjusted.
- *
- * Adjust the data length to account for how much data
- * is actually on the wire.
- *
- * returns the adjusted data length
- **/
-static int
-lpfc_bg_scsi_adjust_dl(struct lpfc_hba *phba,
- struct lpfc_scsi_buf *lpfc_cmd)
-{
- struct scsi_cmnd *sc = lpfc_cmd->pCmd;
- int diflen, fcpdl;
- unsigned blksize;
-
- fcpdl = scsi_bufflen(sc);
-
- /* Check if there is protection data on the wire */
- if (sc->sc_data_direction == DMA_FROM_DEVICE) {
- /* Read */
- if (scsi_get_prot_op(sc) == SCSI_PROT_READ_INSERT)
- return fcpdl;
-
- } else {
- /* Write */
- if (scsi_get_prot_op(sc) == SCSI_PROT_WRITE_STRIP)
- return fcpdl;
- }
-
- /* If protection data on the wire, adjust the count accordingly */
- blksize = lpfc_cmd_blksize(sc);
- diflen = (fcpdl / blksize) * 8;
- fcpdl += diflen;
- return fcpdl;
-}
-
-/**
* lpfc_bg_scsi_prep_dma_buf_s4 - DMA mapping for scsi buffer to SLI4 IF spec
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
@@ -3564,7 +3614,6 @@
}
fcpdl = lpfc_bg_scsi_adjust_dl(phba, lpfc_cmd);
-
fcp_cmnd->fcpDl = be32_to_cpu(fcpdl);
/*