Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-07-23
This series contains updates to e1000e, igb, ixgbevf, i40e and i40evf.
Emil extends the reporting of the RSS key and hash table by adding support
for x550 VFs.
Jia-Ju Bai fixes a QoS issue in e1000e where the error handling lacked a
call to pm_qos_remove_request() to cleanup the QoS request made in
e1000_open().
Todd updates igb to report unsupported for ethtool coalesce settings
that are not supported. Also updated the driver to use the ARRAY_SIZE()
macro.
Carolyn fixes and refactors the dynamic ITR code for i40e and i40evf
which would never change dynamically. So update the switch() statement
to have a default case and switch on "new_latency_range" versus the
current ITR setting.
Shannon cleans up i40e code, where there were un-needed goto's. Also
clean up error status messages that were causing some confusion in
PHY and FCoE setup error reports.
Mitch updates the virtual channel interface to prepare for the x722 device
and other future devices, so that the VF driver can report what its
capable of supporting to the PF driver. Updates the i40evf driver to
handle resets like Core or EMP resets, where the device is reinitialized
and the VF will not get the same VSI.
Jesse updates the i40e and i40evf driver to use the kernel BIT() and
BIT_ULL() macros.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index cb5777b..8cd384d 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -105,6 +105,8 @@
#define MAX_VFS 30 /* Max VFs supported by BE3 FW */
#define FW_VER_LEN 32
+#define CNTL_SERIAL_NUM_WORDS 8 /* Controller serial number words */
+#define CNTL_SERIAL_NUM_WORD_SZ (sizeof(u16)) /* Byte-sz of serial num word */
#define RSS_INDIR_TABLE_LEN 128
#define RSS_HASH_KEY_LEN 40
@@ -590,6 +592,7 @@
struct rss_info rss_info;
/* Filters for packets that need to be sent to BMC */
u32 bmc_filt_mask;
+ u16 serial_num[CNTL_SERIAL_NUM_WORDS];
};
#define be_physfn(adapter) (!adapter->virtfn)
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.c b/drivers/net/ethernet/emulex/benet/be_cmds.c
index ecad46f..3be1fbd 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.c
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.c
@@ -2852,10 +2852,11 @@
struct be_mcc_wrb *wrb;
struct be_cmd_req_cntl_attribs *req;
struct be_cmd_resp_cntl_attribs *resp;
- int status;
+ int status, i;
int payload_len = max(sizeof(*req), sizeof(*resp));
struct mgmt_controller_attrib *attribs;
struct be_dma_mem attribs_cmd;
+ u32 *serial_num;
if (mutex_lock_interruptible(&adapter->mbox_lock))
return -1;
@@ -2886,6 +2887,10 @@
if (!status) {
attribs = attribs_cmd.va + sizeof(struct be_cmd_resp_hdr);
adapter->hba_port_num = attribs->hba_attribs.phy_port;
+ serial_num = attribs->hba_attribs.controller_serial_number;
+ for (i = 0; i < CNTL_SERIAL_NUM_WORDS; i++)
+ adapter->serial_num[i] = le32_to_cpu(serial_num[i]) &
+ (BIT_MASK(16) - 1);
}
err:
diff --git a/drivers/net/ethernet/emulex/benet/be_cmds.h b/drivers/net/ethernet/emulex/benet/be_cmds.h
index a4479f7..36d835b 100644
--- a/drivers/net/ethernet/emulex/benet/be_cmds.h
+++ b/drivers/net/ethernet/emulex/benet/be_cmds.h
@@ -1637,10 +1637,12 @@
struct mgmt_hba_attribs {
u32 rsvd0[24];
u8 controller_model_number[32];
- u32 rsvd1[79];
- u8 rsvd2[3];
+ u32 rsvd1[16];
+ u32 controller_serial_number[8];
+ u32 rsvd2[55];
+ u8 rsvd3[3];
u8 phy_port;
- u32 rsvd3[13];
+ u32 rsvd4[13];
} __packed;
struct mgmt_controller_attrib {
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index c996dd7..5e92db8 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -5219,6 +5219,27 @@
}
#endif
+static int be_get_phys_port_id(struct net_device *dev,
+ struct netdev_phys_item_id *ppid)
+{
+ int i, id_len = CNTL_SERIAL_NUM_WORDS * CNTL_SERIAL_NUM_WORD_SZ + 1;
+ struct be_adapter *adapter = netdev_priv(dev);
+ u8 *id;
+
+ if (MAX_PHYS_ITEM_ID_LEN < id_len)
+ return -ENOSPC;
+
+ ppid->id[0] = adapter->hba_port_num + 1;
+ id = &ppid->id[1];
+ for (i = CNTL_SERIAL_NUM_WORDS - 1; i >= 0;
+ i--, id += CNTL_SERIAL_NUM_WORD_SZ)
+ memcpy(id, &adapter->serial_num[i], CNTL_SERIAL_NUM_WORD_SZ);
+
+ ppid->id_len = id_len;
+
+ return 0;
+}
+
static const struct net_device_ops be_netdev_ops = {
.ndo_open = be_open,
.ndo_stop = be_close,
@@ -5249,6 +5270,7 @@
.ndo_del_vxlan_port = be_del_vxlan_port,
.ndo_features_check = be_features_check,
#endif
+ .ndo_get_phys_port_id = be_get_phys_port_id,
};
static void be_netdev_init(struct net_device *netdev)
diff --git a/net/bridge/br_netlink.c b/net/bridge/br_netlink.c
index 364bdc9..793d247 100644
--- a/net/bridge/br_netlink.c
+++ b/net/bridge/br_netlink.c
@@ -164,8 +164,6 @@
sizeof(vinfo), &vinfo))
goto nla_put_failure;
- vinfo.flags &= ~BRIDGE_VLAN_INFO_RANGE_BEGIN;
-
vinfo.vid = vid_end;
vinfo.flags = flags | BRIDGE_VLAN_INFO_RANGE_END;
if (nla_put(skb, IFLA_BRIDGE_VLAN_INFO,