tty: move a number of tty drivers from drivers/char/ to drivers/tty/
As planned by Arnd Bergmann, this moves the following drivers from
drivers/char/ to drivers/tty/ as that's where they really belong:
amiserial
nozomi
synclink
rocket
cyclades
moxa
mxser
isicom
bfin_jtag_comm
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 9cfbdb3..3fd7199 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -147,4 +147,175 @@
When not in use, each legacy PTY occupies 12 bytes on 32-bit
architectures and 24 bytes on 64-bit architectures.
+config BFIN_JTAG_COMM
+ tristate "Blackfin JTAG Communication"
+ depends on BLACKFIN
+ help
+ Add support for emulating a TTY device over the Blackfin JTAG.
+
+ To compile this driver as a module, choose M here: the
+ module will be called bfin_jtag_comm.
+
+config BFIN_JTAG_COMM_CONSOLE
+ bool "Console on Blackfin JTAG"
+ depends on BFIN_JTAG_COMM=y
+
+config SERIAL_NONSTANDARD
+ bool "Non-standard serial port support"
+ depends on HAS_IOMEM
+ ---help---
+ Say Y here if you have any non-standard serial boards -- boards
+ which aren't supported using the standard "dumb" serial driver.
+ This includes intelligent serial boards such as Cyclades,
+ Digiboards, etc. These are usually used for systems that need many
+ serial ports because they serve many terminals or dial-in
+ connections.
+
+ Note that the answer to this question won't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about non-standard serial boards.
+
+ Most people can say N here.
+
+config ROCKETPORT
+ tristate "Comtrol RocketPort support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ help
+ This driver supports Comtrol RocketPort and RocketModem PCI boards.
+ These boards provide 2, 4, 8, 16, or 32 high-speed serial ports or
+ modems. For information about the RocketPort/RocketModem boards
+ and this driver read <file:Documentation/serial/rocket.txt>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rocket.
+
+ If you want to compile this driver into the kernel, say Y here. If
+ you don't have a Comtrol RocketPort/RocketModem card installed, say N.
+
+config CYCLADES
+ tristate "Cyclades async mux support"
+ depends on SERIAL_NONSTANDARD && (PCI || ISA)
+ select FW_LOADER
+ ---help---
+ This driver supports Cyclades Z and Y multiserial boards.
+ You would need something like this to connect more than two modems to
+ your Linux box, for instance in order to become a dial-in server.
+
+ For information about the Cyclades-Z card, read
+ <file:Documentation/serial/README.cycladesZ>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyclades.
+
+ If you haven't heard about it, it's safe to say N.
+
+config CYZ_INTR
+ bool "Cyclades-Z interrupt mode operation (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CYCLADES
+ help
+ The Cyclades-Z family of multiport cards allows 2 (two) driver op
+ modes: polling and interrupt. In polling mode, the driver will check
+ the status of the Cyclades-Z ports every certain amount of time
+ (which is called polling cycle and is configurable). In interrupt
+ mode, it will use an interrupt line (IRQ) in order to check the
+ status of the Cyclades-Z ports. The default op mode is polling. If
+ unsure, say N.
+
+config MOXA_INTELLIO
+ tristate "Moxa Intellio support"
+ depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
+ help
+ Say Y here if you have a Moxa Intellio multiport serial card.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxa.
+
+config MOXA_SMARTIO
+ tristate "Moxa SmartIO support v. 2.0"
+ depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA)
+ help
+ Say Y here if you have a Moxa SmartIO multiport serial card and/or
+ want to help develop a new version of this driver.
+
+ This is upgraded (1.9.1) driver from original Moxa drivers with
+ changes finally resulting in PCI probing.
+
+ This driver can also be built as a module. The module will be called
+ mxser. If you want to do that, say M here.
+
+config SYNCLINK
+ tristate "Microgate SyncLink card support"
+ depends on SERIAL_NONSTANDARD && PCI && ISA_DMA_API
+ help
+ Provides support for the SyncLink ISA and PCI multiprotocol serial
+ adapters. These adapters support asynchronous and HDLC bit
+ synchronous communication up to 10Mbps (PCI adapter).
+
+ This driver can only be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclink. If you want to do that, say M
+ here.
+
+config SYNCLINKMP
+ tristate "SyncLink Multiport support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Enable support for the SyncLink Multiport (2 or 4 ports)
+ serial adapter, running asynchronous and HDLC communications up
+ to 2.048Mbps. Each ports is independently selectable for
+ RS-232, V.35, RS-449, RS-530, and X.21
+
+ This driver may be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called synclinkmp. If you want to do that, say M
+ here.
+
+config SYNCLINK_GT
+ tristate "SyncLink GT/AC support"
+ depends on SERIAL_NONSTANDARD && PCI
+ help
+ Support for SyncLink GT and SyncLink AC families of
+ synchronous and asynchronous serial adapters
+ manufactured by Microgate Systems, Ltd. (www.microgate.com)
+
+config NOZOMI
+ tristate "HSDPA Broadband Wireless Data Card - Globe Trotter"
+ depends on PCI && EXPERIMENTAL
+ help
+ If you have a HSDPA driver Broadband Wireless Data Card -
+ Globe Trotter PCMCIA card, say Y here.
+
+ To compile this driver as a module, choose M here, the module
+ will be called nozomi.
+
+config ISI
+ tristate "Multi-Tech multiport card support (EXPERIMENTAL)"
+ depends on SERIAL_NONSTANDARD && PCI
+ select FW_LOADER
+ help
+ This is a driver for the Multi-Tech cards which provide several
+ serial ports. The driver is experimental and can currently only be
+ built as a module. The module will be called isicom.
+ If you want to do that, choose M here.
+
+config N_HDLC
+ tristate "HDLC line discipline support"
+ depends on SERIAL_NONSTANDARD
+ help
+ Allows synchronous HDLC communications with tty device drivers that
+ support synchronous HDLC such as the Microgate SyncLink adapter.
+
+ This driver can be built as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want).
+ The module will be called n_hdlc. If you want to do that, say M
+ here.
+
+config N_GSM
+ tristate "GSM MUX line discipline support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ depends on NET
+ help
+ This line discipline provides support for the GSM MUX protocol and
+ presents the mux as a set of 61 individual tty devices.