| /* |
| * sound/soc/omap/mcbsp.c |
| * |
| * Copyright (C) 2004 Nokia Corporation |
| * Author: Samuel Ortiz <samuel.ortiz@nokia.com> |
| * |
| * Contact: Jarkko Nikula <jarkko.nikula@bitmer.com> |
| * Peter Ujfalusi <peter.ujfalusi@ti.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| * Multichannel mode not supported. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/device.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/err.h> |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| #include <linux/pm_runtime.h> |
| |
| #include <linux/platform_data/asoc-ti-mcbsp.h> |
| |
| #include "mcbsp.h" |
| |
| static void omap_mcbsp_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) |
| { |
| void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; |
| |
| if (mcbsp->pdata->reg_size == 2) { |
| ((u16 *)mcbsp->reg_cache)[reg] = (u16)val; |
| writew_relaxed((u16)val, addr); |
| } else { |
| ((u32 *)mcbsp->reg_cache)[reg] = val; |
| writel_relaxed(val, addr); |
| } |
| } |
| |
| static int omap_mcbsp_read(struct omap_mcbsp *mcbsp, u16 reg, bool from_cache) |
| { |
| void __iomem *addr = mcbsp->io_base + reg * mcbsp->pdata->reg_step; |
| |
| if (mcbsp->pdata->reg_size == 2) { |
| return !from_cache ? readw_relaxed(addr) : |
| ((u16 *)mcbsp->reg_cache)[reg]; |
| } else { |
| return !from_cache ? readl_relaxed(addr) : |
| ((u32 *)mcbsp->reg_cache)[reg]; |
| } |
| } |
| |
| static void omap_mcbsp_st_write(struct omap_mcbsp *mcbsp, u16 reg, u32 val) |
| { |
| writel_relaxed(val, mcbsp->st_data->io_base_st + reg); |
| } |
| |
| static int omap_mcbsp_st_read(struct omap_mcbsp *mcbsp, u16 reg) |
| { |
| return readl_relaxed(mcbsp->st_data->io_base_st + reg); |
| } |
| |
| #define MCBSP_READ(mcbsp, reg) \ |
| omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 0) |
| #define MCBSP_WRITE(mcbsp, reg, val) \ |
| omap_mcbsp_write(mcbsp, OMAP_MCBSP_REG_##reg, val) |
| #define MCBSP_READ_CACHE(mcbsp, reg) \ |
| omap_mcbsp_read(mcbsp, OMAP_MCBSP_REG_##reg, 1) |
| |
| #define MCBSP_ST_READ(mcbsp, reg) \ |
| omap_mcbsp_st_read(mcbsp, OMAP_ST_REG_##reg) |
| #define MCBSP_ST_WRITE(mcbsp, reg, val) \ |
| omap_mcbsp_st_write(mcbsp, OMAP_ST_REG_##reg, val) |
| |
| static void omap_mcbsp_dump_reg(struct omap_mcbsp *mcbsp) |
| { |
| dev_dbg(mcbsp->dev, "**** McBSP%d regs ****\n", mcbsp->id); |
| dev_dbg(mcbsp->dev, "DRR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, DRR2)); |
| dev_dbg(mcbsp->dev, "DRR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, DRR1)); |
| dev_dbg(mcbsp->dev, "DXR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, DXR2)); |
| dev_dbg(mcbsp->dev, "DXR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, DXR1)); |
| dev_dbg(mcbsp->dev, "SPCR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, SPCR2)); |
| dev_dbg(mcbsp->dev, "SPCR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, SPCR1)); |
| dev_dbg(mcbsp->dev, "RCR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, RCR2)); |
| dev_dbg(mcbsp->dev, "RCR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, RCR1)); |
| dev_dbg(mcbsp->dev, "XCR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, XCR2)); |
| dev_dbg(mcbsp->dev, "XCR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, XCR1)); |
| dev_dbg(mcbsp->dev, "SRGR2: 0x%04x\n", |
| MCBSP_READ(mcbsp, SRGR2)); |
| dev_dbg(mcbsp->dev, "SRGR1: 0x%04x\n", |
| MCBSP_READ(mcbsp, SRGR1)); |
| dev_dbg(mcbsp->dev, "PCR0: 0x%04x\n", |
| MCBSP_READ(mcbsp, PCR0)); |
| dev_dbg(mcbsp->dev, "***********************\n"); |
| } |
| |
| static irqreturn_t omap_mcbsp_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp = dev_id; |
| u16 irqst; |
| |
| irqst = MCBSP_READ(mcbsp, IRQST); |
| dev_dbg(mcbsp->dev, "IRQ callback : 0x%x\n", irqst); |
| |
| if (irqst & RSYNCERREN) |
| dev_err(mcbsp->dev, "RX Frame Sync Error!\n"); |
| if (irqst & RFSREN) |
| dev_dbg(mcbsp->dev, "RX Frame Sync\n"); |
| if (irqst & REOFEN) |
| dev_dbg(mcbsp->dev, "RX End Of Frame\n"); |
| if (irqst & RRDYEN) |
| dev_dbg(mcbsp->dev, "RX Buffer Threshold Reached\n"); |
| if (irqst & RUNDFLEN) |
| dev_err(mcbsp->dev, "RX Buffer Underflow!\n"); |
| if (irqst & ROVFLEN) |
| dev_err(mcbsp->dev, "RX Buffer Overflow!\n"); |
| |
| if (irqst & XSYNCERREN) |
| dev_err(mcbsp->dev, "TX Frame Sync Error!\n"); |
| if (irqst & XFSXEN) |
| dev_dbg(mcbsp->dev, "TX Frame Sync\n"); |
| if (irqst & XEOFEN) |
| dev_dbg(mcbsp->dev, "TX End Of Frame\n"); |
| if (irqst & XRDYEN) |
| dev_dbg(mcbsp->dev, "TX Buffer threshold Reached\n"); |
| if (irqst & XUNDFLEN) |
| dev_err(mcbsp->dev, "TX Buffer Underflow!\n"); |
| if (irqst & XOVFLEN) |
| dev_err(mcbsp->dev, "TX Buffer Overflow!\n"); |
| if (irqst & XEMPTYEOFEN) |
| dev_dbg(mcbsp->dev, "TX Buffer empty at end of frame\n"); |
| |
| MCBSP_WRITE(mcbsp, IRQST, irqst); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_tx = dev_id; |
| u16 irqst_spcr2; |
| |
| irqst_spcr2 = MCBSP_READ(mcbsp_tx, SPCR2); |
| dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2); |
| |
| if (irqst_spcr2 & XSYNC_ERR) { |
| dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n", |
| irqst_spcr2); |
| /* Writing zero to XSYNC_ERR clears the IRQ */ |
| MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) |
| { |
| struct omap_mcbsp *mcbsp_rx = dev_id; |
| u16 irqst_spcr1; |
| |
| irqst_spcr1 = MCBSP_READ(mcbsp_rx, SPCR1); |
| dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1); |
| |
| if (irqst_spcr1 & RSYNC_ERR) { |
| dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n", |
| irqst_spcr1); |
| /* Writing zero to RSYNC_ERR clears the IRQ */ |
| MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * omap_mcbsp_config simply write a config to the |
| * appropriate McBSP. |
| * You either call this function or set the McBSP registers |
| * by yourself before calling omap_mcbsp_start(). |
| */ |
| void omap_mcbsp_config(struct omap_mcbsp *mcbsp, |
| const struct omap_mcbsp_reg_cfg *config) |
| { |
| dev_dbg(mcbsp->dev, "Configuring McBSP%d phys_base: 0x%08lx\n", |
| mcbsp->id, mcbsp->phys_base); |
| |
| /* We write the given config */ |
| MCBSP_WRITE(mcbsp, SPCR2, config->spcr2); |
| MCBSP_WRITE(mcbsp, SPCR1, config->spcr1); |
| MCBSP_WRITE(mcbsp, RCR2, config->rcr2); |
| MCBSP_WRITE(mcbsp, RCR1, config->rcr1); |
| MCBSP_WRITE(mcbsp, XCR2, config->xcr2); |
| MCBSP_WRITE(mcbsp, XCR1, config->xcr1); |
| MCBSP_WRITE(mcbsp, SRGR2, config->srgr2); |
| MCBSP_WRITE(mcbsp, SRGR1, config->srgr1); |
| MCBSP_WRITE(mcbsp, MCR2, config->mcr2); |
| MCBSP_WRITE(mcbsp, MCR1, config->mcr1); |
| MCBSP_WRITE(mcbsp, PCR0, config->pcr0); |
| if (mcbsp->pdata->has_ccr) { |
| MCBSP_WRITE(mcbsp, XCCR, config->xccr); |
| MCBSP_WRITE(mcbsp, RCCR, config->rccr); |
| } |
| /* Enable wakeup behavior */ |
| if (mcbsp->pdata->has_wakeup) |
| MCBSP_WRITE(mcbsp, WAKEUPEN, XRDYEN | RRDYEN); |
| |
| /* Enable TX/RX sync error interrupts by default */ |
| if (mcbsp->irq) |
| MCBSP_WRITE(mcbsp, IRQEN, RSYNCERREN | XSYNCERREN); |
| } |
| |
| /** |
| * omap_mcbsp_dma_reg_params - returns the address of mcbsp data register |
| * @id - mcbsp id |
| * @stream - indicates the direction of data flow (rx or tx) |
| * |
| * Returns the address of mcbsp data transmit register or data receive register |
| * to be used by DMA for transferring/receiving data based on the value of |
| * @stream for the requested mcbsp given by @id |
| */ |
| static int omap_mcbsp_dma_reg_params(struct omap_mcbsp *mcbsp, |
| unsigned int stream) |
| { |
| int data_reg; |
| |
| if (mcbsp->pdata->reg_size == 2) { |
| if (stream) |
| data_reg = OMAP_MCBSP_REG_DRR1; |
| else |
| data_reg = OMAP_MCBSP_REG_DXR1; |
| } else { |
| if (stream) |
| data_reg = OMAP_MCBSP_REG_DRR; |
| else |
| data_reg = OMAP_MCBSP_REG_DXR; |
| } |
| |
| return mcbsp->phys_dma_base + data_reg * mcbsp->pdata->reg_step; |
| } |
| |
| static void omap_st_on(struct omap_mcbsp *mcbsp) |
| { |
| unsigned int w; |
| |
| if (mcbsp->pdata->enable_st_clock) |
| mcbsp->pdata->enable_st_clock(mcbsp->id, 1); |
| |
| /* Enable McBSP Sidetone */ |
| w = MCBSP_READ(mcbsp, SSELCR); |
| MCBSP_WRITE(mcbsp, SSELCR, w | SIDETONEEN); |
| |
| /* Enable Sidetone from Sidetone Core */ |
| w = MCBSP_ST_READ(mcbsp, SSELCR); |
| MCBSP_ST_WRITE(mcbsp, SSELCR, w | ST_SIDETONEEN); |
| } |
| |
| static void omap_st_off(struct omap_mcbsp *mcbsp) |
| { |
| unsigned int w; |
| |
| w = MCBSP_ST_READ(mcbsp, SSELCR); |
| MCBSP_ST_WRITE(mcbsp, SSELCR, w & ~(ST_SIDETONEEN)); |
| |
| w = MCBSP_READ(mcbsp, SSELCR); |
| MCBSP_WRITE(mcbsp, SSELCR, w & ~(SIDETONEEN)); |
| |
| if (mcbsp->pdata->enable_st_clock) |
| mcbsp->pdata->enable_st_clock(mcbsp->id, 0); |
| } |
| |
| static void omap_st_fir_write(struct omap_mcbsp *mcbsp, s16 *fir) |
| { |
| u16 val, i; |
| |
| val = MCBSP_ST_READ(mcbsp, SSELCR); |
| |
| if (val & ST_COEFFWREN) |
| MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); |
| |
| MCBSP_ST_WRITE(mcbsp, SSELCR, val | ST_COEFFWREN); |
| |
| for (i = 0; i < 128; i++) |
| MCBSP_ST_WRITE(mcbsp, SFIRCR, fir[i]); |
| |
| i = 0; |
| |
| val = MCBSP_ST_READ(mcbsp, SSELCR); |
| while (!(val & ST_COEFFWRDONE) && (++i < 1000)) |
| val = MCBSP_ST_READ(mcbsp, SSELCR); |
| |
| MCBSP_ST_WRITE(mcbsp, SSELCR, val & ~(ST_COEFFWREN)); |
| |
| if (i == 1000) |
| dev_err(mcbsp->dev, "McBSP FIR load error!\n"); |
| } |
| |
| static void omap_st_chgain(struct omap_mcbsp *mcbsp) |
| { |
| u16 w; |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| |
| w = MCBSP_ST_READ(mcbsp, SSELCR); |
| |
| MCBSP_ST_WRITE(mcbsp, SGAINCR, ST_CH0GAIN(st_data->ch0gain) | \ |
| ST_CH1GAIN(st_data->ch1gain)); |
| } |
| |
| int omap_st_set_chgain(struct omap_mcbsp *mcbsp, int channel, s16 chgain) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| int ret = 0; |
| |
| if (!st_data) |
| return -ENOENT; |
| |
| spin_lock_irq(&mcbsp->lock); |
| if (channel == 0) |
| st_data->ch0gain = chgain; |
| else if (channel == 1) |
| st_data->ch1gain = chgain; |
| else |
| ret = -EINVAL; |
| |
| if (st_data->enabled) |
| omap_st_chgain(mcbsp); |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return ret; |
| } |
| |
| int omap_st_get_chgain(struct omap_mcbsp *mcbsp, int channel, s16 *chgain) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| int ret = 0; |
| |
| if (!st_data) |
| return -ENOENT; |
| |
| spin_lock_irq(&mcbsp->lock); |
| if (channel == 0) |
| *chgain = st_data->ch0gain; |
| else if (channel == 1) |
| *chgain = st_data->ch1gain; |
| else |
| ret = -EINVAL; |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return ret; |
| } |
| |
| static int omap_st_start(struct omap_mcbsp *mcbsp) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| |
| if (st_data->enabled && !st_data->running) { |
| omap_st_fir_write(mcbsp, st_data->taps); |
| omap_st_chgain(mcbsp); |
| |
| if (!mcbsp->free) { |
| omap_st_on(mcbsp); |
| st_data->running = 1; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int omap_st_enable(struct omap_mcbsp *mcbsp) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| |
| if (!st_data) |
| return -ENODEV; |
| |
| spin_lock_irq(&mcbsp->lock); |
| st_data->enabled = 1; |
| omap_st_start(mcbsp); |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return 0; |
| } |
| |
| static int omap_st_stop(struct omap_mcbsp *mcbsp) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| |
| if (st_data->running) { |
| if (!mcbsp->free) { |
| omap_st_off(mcbsp); |
| st_data->running = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| int omap_st_disable(struct omap_mcbsp *mcbsp) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| int ret = 0; |
| |
| if (!st_data) |
| return -ENODEV; |
| |
| spin_lock_irq(&mcbsp->lock); |
| omap_st_stop(mcbsp); |
| st_data->enabled = 0; |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return ret; |
| } |
| |
| int omap_st_is_enabled(struct omap_mcbsp *mcbsp) |
| { |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| |
| if (!st_data) |
| return -ENODEV; |
| |
| return st_data->enabled; |
| } |
| |
| /* |
| * omap_mcbsp_set_rx_threshold configures the transmit threshold in words. |
| * The threshold parameter is 1 based, and it is converted (threshold - 1) |
| * for the THRSH2 register. |
| */ |
| void omap_mcbsp_set_tx_threshold(struct omap_mcbsp *mcbsp, u16 threshold) |
| { |
| if (mcbsp->pdata->buffer_size == 0) |
| return; |
| |
| if (threshold && threshold <= mcbsp->max_tx_thres) |
| MCBSP_WRITE(mcbsp, THRSH2, threshold - 1); |
| } |
| |
| /* |
| * omap_mcbsp_set_rx_threshold configures the receive threshold in words. |
| * The threshold parameter is 1 based, and it is converted (threshold - 1) |
| * for the THRSH1 register. |
| */ |
| void omap_mcbsp_set_rx_threshold(struct omap_mcbsp *mcbsp, u16 threshold) |
| { |
| if (mcbsp->pdata->buffer_size == 0) |
| return; |
| |
| if (threshold && threshold <= mcbsp->max_rx_thres) |
| MCBSP_WRITE(mcbsp, THRSH1, threshold - 1); |
| } |
| |
| /* |
| * omap_mcbsp_get_tx_delay returns the number of used slots in the McBSP FIFO |
| */ |
| u16 omap_mcbsp_get_tx_delay(struct omap_mcbsp *mcbsp) |
| { |
| u16 buffstat; |
| |
| if (mcbsp->pdata->buffer_size == 0) |
| return 0; |
| |
| /* Returns the number of free locations in the buffer */ |
| buffstat = MCBSP_READ(mcbsp, XBUFFSTAT); |
| |
| /* Number of slots are different in McBSP ports */ |
| return mcbsp->pdata->buffer_size - buffstat; |
| } |
| |
| /* |
| * omap_mcbsp_get_rx_delay returns the number of free slots in the McBSP FIFO |
| * to reach the threshold value (when the DMA will be triggered to read it) |
| */ |
| u16 omap_mcbsp_get_rx_delay(struct omap_mcbsp *mcbsp) |
| { |
| u16 buffstat, threshold; |
| |
| if (mcbsp->pdata->buffer_size == 0) |
| return 0; |
| |
| /* Returns the number of used locations in the buffer */ |
| buffstat = MCBSP_READ(mcbsp, RBUFFSTAT); |
| /* RX threshold */ |
| threshold = MCBSP_READ(mcbsp, THRSH1); |
| |
| /* Return the number of location till we reach the threshold limit */ |
| if (threshold <= buffstat) |
| return 0; |
| else |
| return threshold - buffstat; |
| } |
| |
| int omap_mcbsp_request(struct omap_mcbsp *mcbsp) |
| { |
| void *reg_cache; |
| int err; |
| |
| reg_cache = kzalloc(mcbsp->reg_cache_size, GFP_KERNEL); |
| if (!reg_cache) { |
| return -ENOMEM; |
| } |
| |
| spin_lock(&mcbsp->lock); |
| if (!mcbsp->free) { |
| dev_err(mcbsp->dev, "McBSP%d is currently in use\n", |
| mcbsp->id); |
| err = -EBUSY; |
| goto err_kfree; |
| } |
| |
| mcbsp->free = false; |
| mcbsp->reg_cache = reg_cache; |
| spin_unlock(&mcbsp->lock); |
| |
| if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->request) |
| mcbsp->pdata->ops->request(mcbsp->id - 1); |
| |
| /* |
| * Make sure that transmitter, receiver and sample-rate generator are |
| * not running before activating IRQs. |
| */ |
| MCBSP_WRITE(mcbsp, SPCR1, 0); |
| MCBSP_WRITE(mcbsp, SPCR2, 0); |
| |
| if (mcbsp->irq) { |
| err = request_irq(mcbsp->irq, omap_mcbsp_irq_handler, 0, |
| "McBSP", (void *)mcbsp); |
| if (err != 0) { |
| dev_err(mcbsp->dev, "Unable to request IRQ\n"); |
| goto err_clk_disable; |
| } |
| } else { |
| err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, 0, |
| "McBSP TX", (void *)mcbsp); |
| if (err != 0) { |
| dev_err(mcbsp->dev, "Unable to request TX IRQ\n"); |
| goto err_clk_disable; |
| } |
| |
| err = request_irq(mcbsp->rx_irq, omap_mcbsp_rx_irq_handler, 0, |
| "McBSP RX", (void *)mcbsp); |
| if (err != 0) { |
| dev_err(mcbsp->dev, "Unable to request RX IRQ\n"); |
| goto err_free_irq; |
| } |
| } |
| |
| return 0; |
| err_free_irq: |
| free_irq(mcbsp->tx_irq, (void *)mcbsp); |
| err_clk_disable: |
| if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) |
| mcbsp->pdata->ops->free(mcbsp->id - 1); |
| |
| /* Disable wakeup behavior */ |
| if (mcbsp->pdata->has_wakeup) |
| MCBSP_WRITE(mcbsp, WAKEUPEN, 0); |
| |
| spin_lock(&mcbsp->lock); |
| mcbsp->free = true; |
| mcbsp->reg_cache = NULL; |
| err_kfree: |
| spin_unlock(&mcbsp->lock); |
| kfree(reg_cache); |
| |
| return err; |
| } |
| |
| void omap_mcbsp_free(struct omap_mcbsp *mcbsp) |
| { |
| void *reg_cache; |
| |
| if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free) |
| mcbsp->pdata->ops->free(mcbsp->id - 1); |
| |
| /* Disable wakeup behavior */ |
| if (mcbsp->pdata->has_wakeup) |
| MCBSP_WRITE(mcbsp, WAKEUPEN, 0); |
| |
| /* Disable interrupt requests */ |
| if (mcbsp->irq) |
| MCBSP_WRITE(mcbsp, IRQEN, 0); |
| |
| if (mcbsp->irq) { |
| free_irq(mcbsp->irq, (void *)mcbsp); |
| } else { |
| free_irq(mcbsp->rx_irq, (void *)mcbsp); |
| free_irq(mcbsp->tx_irq, (void *)mcbsp); |
| } |
| |
| reg_cache = mcbsp->reg_cache; |
| |
| /* |
| * Select CLKS source from internal source unconditionally before |
| * marking the McBSP port as free. |
| * If the external clock source via MCBSP_CLKS pin has been selected the |
| * system will refuse to enter idle if the CLKS pin source is not reset |
| * back to internal source. |
| */ |
| if (!mcbsp_omap1()) |
| omap2_mcbsp_set_clks_src(mcbsp, MCBSP_CLKS_PRCM_SRC); |
| |
| spin_lock(&mcbsp->lock); |
| if (mcbsp->free) |
| dev_err(mcbsp->dev, "McBSP%d was not reserved\n", mcbsp->id); |
| else |
| mcbsp->free = true; |
| mcbsp->reg_cache = NULL; |
| spin_unlock(&mcbsp->lock); |
| |
| kfree(reg_cache); |
| } |
| |
| /* |
| * Here we start the McBSP, by enabling transmitter, receiver or both. |
| * If no transmitter or receiver is active prior calling, then sample-rate |
| * generator and frame sync are started. |
| */ |
| void omap_mcbsp_start(struct omap_mcbsp *mcbsp, int tx, int rx) |
| { |
| int enable_srg = 0; |
| u16 w; |
| |
| if (mcbsp->st_data) |
| omap_st_start(mcbsp); |
| |
| /* Only enable SRG, if McBSP is master */ |
| w = MCBSP_READ_CACHE(mcbsp, PCR0); |
| if (w & (FSXM | FSRM | CLKXM | CLKRM)) |
| enable_srg = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | |
| MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); |
| |
| if (enable_srg) { |
| /* Start the sample generator */ |
| w = MCBSP_READ_CACHE(mcbsp, SPCR2); |
| MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 6)); |
| } |
| |
| /* Enable transmitter and receiver */ |
| tx &= 1; |
| w = MCBSP_READ_CACHE(mcbsp, SPCR2); |
| MCBSP_WRITE(mcbsp, SPCR2, w | tx); |
| |
| rx &= 1; |
| w = MCBSP_READ_CACHE(mcbsp, SPCR1); |
| MCBSP_WRITE(mcbsp, SPCR1, w | rx); |
| |
| /* |
| * Worst case: CLKSRG*2 = 8000khz: (1/8000) * 2 * 2 usec |
| * REVISIT: 100us may give enough time for two CLKSRG, however |
| * due to some unknown PM related, clock gating etc. reason it |
| * is now at 500us. |
| */ |
| udelay(500); |
| |
| if (enable_srg) { |
| /* Start frame sync */ |
| w = MCBSP_READ_CACHE(mcbsp, SPCR2); |
| MCBSP_WRITE(mcbsp, SPCR2, w | (1 << 7)); |
| } |
| |
| if (mcbsp->pdata->has_ccr) { |
| /* Release the transmitter and receiver */ |
| w = MCBSP_READ_CACHE(mcbsp, XCCR); |
| w &= ~(tx ? XDISABLE : 0); |
| MCBSP_WRITE(mcbsp, XCCR, w); |
| w = MCBSP_READ_CACHE(mcbsp, RCCR); |
| w &= ~(rx ? RDISABLE : 0); |
| MCBSP_WRITE(mcbsp, RCCR, w); |
| } |
| |
| /* Dump McBSP Regs */ |
| omap_mcbsp_dump_reg(mcbsp); |
| } |
| |
| void omap_mcbsp_stop(struct omap_mcbsp *mcbsp, int tx, int rx) |
| { |
| int idle; |
| u16 w; |
| |
| /* Reset transmitter */ |
| tx &= 1; |
| if (mcbsp->pdata->has_ccr) { |
| w = MCBSP_READ_CACHE(mcbsp, XCCR); |
| w |= (tx ? XDISABLE : 0); |
| MCBSP_WRITE(mcbsp, XCCR, w); |
| } |
| w = MCBSP_READ_CACHE(mcbsp, SPCR2); |
| MCBSP_WRITE(mcbsp, SPCR2, w & ~tx); |
| |
| /* Reset receiver */ |
| rx &= 1; |
| if (mcbsp->pdata->has_ccr) { |
| w = MCBSP_READ_CACHE(mcbsp, RCCR); |
| w |= (rx ? RDISABLE : 0); |
| MCBSP_WRITE(mcbsp, RCCR, w); |
| } |
| w = MCBSP_READ_CACHE(mcbsp, SPCR1); |
| MCBSP_WRITE(mcbsp, SPCR1, w & ~rx); |
| |
| idle = !((MCBSP_READ_CACHE(mcbsp, SPCR2) | |
| MCBSP_READ_CACHE(mcbsp, SPCR1)) & 1); |
| |
| if (idle) { |
| /* Reset the sample rate generator */ |
| w = MCBSP_READ_CACHE(mcbsp, SPCR2); |
| MCBSP_WRITE(mcbsp, SPCR2, w & ~(1 << 6)); |
| } |
| |
| if (mcbsp->st_data) |
| omap_st_stop(mcbsp); |
| } |
| |
| int omap2_mcbsp_set_clks_src(struct omap_mcbsp *mcbsp, u8 fck_src_id) |
| { |
| struct clk *fck_src; |
| const char *src; |
| int r; |
| |
| if (fck_src_id == MCBSP_CLKS_PAD_SRC) |
| src = "pad_fck"; |
| else if (fck_src_id == MCBSP_CLKS_PRCM_SRC) |
| src = "prcm_fck"; |
| else |
| return -EINVAL; |
| |
| fck_src = clk_get(mcbsp->dev, src); |
| if (IS_ERR(fck_src)) { |
| dev_err(mcbsp->dev, "CLKS: could not clk_get() %s\n", src); |
| return -EINVAL; |
| } |
| |
| pm_runtime_put_sync(mcbsp->dev); |
| |
| r = clk_set_parent(mcbsp->fclk, fck_src); |
| if (r) { |
| dev_err(mcbsp->dev, "CLKS: could not clk_set_parent() to %s\n", |
| src); |
| clk_put(fck_src); |
| return r; |
| } |
| |
| pm_runtime_get_sync(mcbsp->dev); |
| |
| clk_put(fck_src); |
| |
| return 0; |
| |
| } |
| |
| #define max_thres(m) (mcbsp->pdata->buffer_size) |
| #define valid_threshold(m, val) ((val) <= max_thres(m)) |
| #define THRESHOLD_PROP_BUILDER(prop) \ |
| static ssize_t prop##_show(struct device *dev, \ |
| struct device_attribute *attr, char *buf) \ |
| { \ |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ |
| \ |
| return sprintf(buf, "%u\n", mcbsp->prop); \ |
| } \ |
| \ |
| static ssize_t prop##_store(struct device *dev, \ |
| struct device_attribute *attr, \ |
| const char *buf, size_t size) \ |
| { \ |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); \ |
| unsigned long val; \ |
| int status; \ |
| \ |
| status = kstrtoul(buf, 0, &val); \ |
| if (status) \ |
| return status; \ |
| \ |
| if (!valid_threshold(mcbsp, val)) \ |
| return -EDOM; \ |
| \ |
| mcbsp->prop = val; \ |
| return size; \ |
| } \ |
| \ |
| static DEVICE_ATTR(prop, 0644, prop##_show, prop##_store); |
| |
| THRESHOLD_PROP_BUILDER(max_tx_thres); |
| THRESHOLD_PROP_BUILDER(max_rx_thres); |
| |
| static const char *dma_op_modes[] = { |
| "element", "threshold", |
| }; |
| |
| static ssize_t dma_op_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| int dma_op_mode, i = 0; |
| ssize_t len = 0; |
| const char * const *s; |
| |
| dma_op_mode = mcbsp->dma_op_mode; |
| |
| for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) { |
| if (dma_op_mode == i) |
| len += sprintf(buf + len, "[%s] ", *s); |
| else |
| len += sprintf(buf + len, "%s ", *s); |
| } |
| len += sprintf(buf + len, "\n"); |
| |
| return len; |
| } |
| |
| static ssize_t dma_op_mode_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| const char * const *s; |
| int i = 0; |
| |
| for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) |
| if (sysfs_streq(buf, *s)) |
| break; |
| |
| if (i == ARRAY_SIZE(dma_op_modes)) |
| return -EINVAL; |
| |
| spin_lock_irq(&mcbsp->lock); |
| if (!mcbsp->free) { |
| size = -EBUSY; |
| goto unlock; |
| } |
| mcbsp->dma_op_mode = i; |
| |
| unlock: |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return size; |
| } |
| |
| static DEVICE_ATTR(dma_op_mode, 0644, dma_op_mode_show, dma_op_mode_store); |
| |
| static const struct attribute *additional_attrs[] = { |
| &dev_attr_max_tx_thres.attr, |
| &dev_attr_max_rx_thres.attr, |
| &dev_attr_dma_op_mode.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group additional_attr_group = { |
| .attrs = (struct attribute **)additional_attrs, |
| }; |
| |
| static ssize_t st_taps_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| ssize_t status = 0; |
| int i; |
| |
| spin_lock_irq(&mcbsp->lock); |
| for (i = 0; i < st_data->nr_taps; i++) |
| status += sprintf(&buf[status], (i ? ", %d" : "%d"), |
| st_data->taps[i]); |
| if (i) |
| status += sprintf(&buf[status], "\n"); |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return status; |
| } |
| |
| static ssize_t st_taps_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t size) |
| { |
| struct omap_mcbsp *mcbsp = dev_get_drvdata(dev); |
| struct omap_mcbsp_st_data *st_data = mcbsp->st_data; |
| int val, tmp, status, i = 0; |
| |
| spin_lock_irq(&mcbsp->lock); |
| memset(st_data->taps, 0, sizeof(st_data->taps)); |
| st_data->nr_taps = 0; |
| |
| do { |
| status = sscanf(buf, "%d%n", &val, &tmp); |
| if (status < 0 || status == 0) { |
| size = -EINVAL; |
| goto out; |
| } |
| if (val < -32768 || val > 32767) { |
| size = -EINVAL; |
| goto out; |
| } |
| st_data->taps[i++] = val; |
| buf += tmp; |
| if (*buf != ',') |
| break; |
| buf++; |
| } while (1); |
| |
| st_data->nr_taps = i; |
| |
| out: |
| spin_unlock_irq(&mcbsp->lock); |
| |
| return size; |
| } |
| |
| static DEVICE_ATTR(st_taps, 0644, st_taps_show, st_taps_store); |
| |
| static const struct attribute *sidetone_attrs[] = { |
| &dev_attr_st_taps.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group sidetone_attr_group = { |
| .attrs = (struct attribute **)sidetone_attrs, |
| }; |
| |
| static int omap_st_add(struct omap_mcbsp *mcbsp, struct resource *res) |
| { |
| struct omap_mcbsp_st_data *st_data; |
| int err; |
| |
| st_data = devm_kzalloc(mcbsp->dev, sizeof(*mcbsp->st_data), GFP_KERNEL); |
| if (!st_data) |
| return -ENOMEM; |
| |
| st_data->io_base_st = devm_ioremap(mcbsp->dev, res->start, |
| resource_size(res)); |
| if (!st_data->io_base_st) |
| return -ENOMEM; |
| |
| err = sysfs_create_group(&mcbsp->dev->kobj, &sidetone_attr_group); |
| if (err) |
| return err; |
| |
| mcbsp->st_data = st_data; |
| return 0; |
| } |
| |
| /* |
| * McBSP1 and McBSP3 are directly mapped on 1610 and 1510. |
| * 730 has only 2 McBSP, and both of them are MPU peripherals. |
| */ |
| int omap_mcbsp_init(struct platform_device *pdev) |
| { |
| struct omap_mcbsp *mcbsp = platform_get_drvdata(pdev); |
| struct resource *res; |
| int ret = 0; |
| |
| spin_lock_init(&mcbsp->lock); |
| mcbsp->free = true; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); |
| if (!res) { |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(mcbsp->dev, "invalid memory resource\n"); |
| return -ENOMEM; |
| } |
| } |
| if (!devm_request_mem_region(&pdev->dev, res->start, resource_size(res), |
| dev_name(&pdev->dev))) { |
| dev_err(mcbsp->dev, "memory region already claimed\n"); |
| return -ENODEV; |
| } |
| |
| mcbsp->phys_base = res->start; |
| mcbsp->reg_cache_size = resource_size(res); |
| mcbsp->io_base = devm_ioremap(&pdev->dev, res->start, |
| resource_size(res)); |
| if (!mcbsp->io_base) |
| return -ENOMEM; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma"); |
| if (!res) |
| mcbsp->phys_dma_base = mcbsp->phys_base; |
| else |
| mcbsp->phys_dma_base = res->start; |
| |
| /* |
| * OMAP1, 2 uses two interrupt lines: TX, RX |
| * OMAP2430, OMAP3 SoC have combined IRQ line as well. |
| * OMAP4 and newer SoC only have the combined IRQ line. |
| * Use the combined IRQ if available since it gives better debugging |
| * possibilities. |
| */ |
| mcbsp->irq = platform_get_irq_byname(pdev, "common"); |
| if (mcbsp->irq == -ENXIO) { |
| mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); |
| |
| if (mcbsp->tx_irq == -ENXIO) { |
| mcbsp->irq = platform_get_irq(pdev, 0); |
| mcbsp->tx_irq = 0; |
| } else { |
| mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); |
| mcbsp->irq = 0; |
| } |
| } |
| |
| if (!pdev->dev.of_node) { |
| res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); |
| if (!res) { |
| dev_err(&pdev->dev, "invalid tx DMA channel\n"); |
| return -ENODEV; |
| } |
| mcbsp->dma_req[0] = res->start; |
| mcbsp->dma_data[0].filter_data = &mcbsp->dma_req[0]; |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); |
| if (!res) { |
| dev_err(&pdev->dev, "invalid rx DMA channel\n"); |
| return -ENODEV; |
| } |
| mcbsp->dma_req[1] = res->start; |
| mcbsp->dma_data[1].filter_data = &mcbsp->dma_req[1]; |
| } else { |
| mcbsp->dma_data[0].filter_data = "tx"; |
| mcbsp->dma_data[1].filter_data = "rx"; |
| } |
| |
| mcbsp->dma_data[0].addr = omap_mcbsp_dma_reg_params(mcbsp, 0); |
| mcbsp->dma_data[0].maxburst = 4; |
| |
| mcbsp->dma_data[1].addr = omap_mcbsp_dma_reg_params(mcbsp, 1); |
| mcbsp->dma_data[1].maxburst = 4; |
| |
| mcbsp->fclk = clk_get(&pdev->dev, "fck"); |
| if (IS_ERR(mcbsp->fclk)) { |
| ret = PTR_ERR(mcbsp->fclk); |
| dev_err(mcbsp->dev, "unable to get fck: %d\n", ret); |
| return ret; |
| } |
| |
| mcbsp->dma_op_mode = MCBSP_DMA_MODE_ELEMENT; |
| if (mcbsp->pdata->buffer_size) { |
| /* |
| * Initially configure the maximum thresholds to a safe value. |
| * The McBSP FIFO usage with these values should not go under |
| * 16 locations. |
| * If the whole FIFO without safety buffer is used, than there |
| * is a possibility that the DMA will be not able to push the |
| * new data on time, causing channel shifts in runtime. |
| */ |
| mcbsp->max_tx_thres = max_thres(mcbsp) - 0x10; |
| mcbsp->max_rx_thres = max_thres(mcbsp) - 0x10; |
| |
| ret = sysfs_create_group(&mcbsp->dev->kobj, |
| &additional_attr_group); |
| if (ret) { |
| dev_err(mcbsp->dev, |
| "Unable to create additional controls\n"); |
| goto err_thres; |
| } |
| } else { |
| mcbsp->max_tx_thres = -EINVAL; |
| mcbsp->max_rx_thres = -EINVAL; |
| } |
| |
| res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "sidetone"); |
| if (res) { |
| ret = omap_st_add(mcbsp, res); |
| if (ret) { |
| dev_err(mcbsp->dev, |
| "Unable to create sidetone controls\n"); |
| goto err_st; |
| } |
| } |
| |
| return 0; |
| |
| err_st: |
| if (mcbsp->pdata->buffer_size) |
| sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); |
| err_thres: |
| clk_put(mcbsp->fclk); |
| return ret; |
| } |
| |
| void omap_mcbsp_sysfs_remove(struct omap_mcbsp *mcbsp) |
| { |
| if (mcbsp->pdata->buffer_size) |
| sysfs_remove_group(&mcbsp->dev->kobj, &additional_attr_group); |
| |
| if (mcbsp->st_data) |
| sysfs_remove_group(&mcbsp->dev->kobj, &sidetone_attr_group); |
| } |