bnx2x: fix PTE write access error
PTE write access error might occur in MF_ALLOWED mode when IOMMU
is active. The patch adds rmmod HSI indicating to MFW to stop
running queries which might trigger this failure.
Signed-off-by: Barak Witkowsky <barak@broadcom.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index f07a7ff..ce9b387 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -1502,6 +1502,7 @@
#define BC_SUPPORTS_DCBX_MSG_NON_PMF (1 << 21)
#define IS_VF_FLAG (1 << 22)
#define INTERRUPTS_ENABLED_FLAG (1 << 23)
+#define BC_SUPPORTS_RMMOD_CMD (1 << 24)
#define BP_NOMCP(bp) ((bp)->flags & NO_MCP_FLAG)
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
index 5018e52..32767f6 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h
@@ -1300,6 +1300,9 @@
#define DRV_MSG_CODE_EEE_RESULTS_ACK 0xda000000
+ #define DRV_MSG_CODE_RMMOD 0xdb000000
+ #define REQ_BC_VER_4_RMMOD_CMD 0x0007080f
+
#define DRV_MSG_CODE_SET_MF_BW 0xe0000000
#define REQ_BC_VER_4_SET_MF_BW 0x00060202
#define DRV_MSG_CODE_SET_MF_BW_ACK 0xe1000000
@@ -1372,6 +1375,8 @@
#define FW_MSG_CODE_EEE_RESULS_ACK 0xda100000
+ #define FW_MSG_CODE_RMMOD_ACK 0xdb100000
+
#define FW_MSG_CODE_SET_MF_BW_SENT 0xe0000000
#define FW_MSG_CODE_SET_MF_BW_DONE 0xe1000000
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 78b7195..339c388 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -10368,6 +10368,10 @@
bp->flags |= (val >= REQ_BC_VER_4_DCBX_ADMIN_MSG_NON_PMF) ?
BC_SUPPORTS_DCBX_MSG_NON_PMF : 0;
+
+ bp->flags |= (val >= REQ_BC_VER_4_RMMOD_CMD) ?
+ BC_SUPPORTS_RMMOD_CMD : 0;
+
boot_mode = SHMEM_RD(bp,
dev_info.port_feature_config[BP_PORT(bp)].mba_config) &
PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK;
@@ -12824,6 +12828,11 @@
bnx2x_dcbnl_update_applist(bp, true);
#endif
+ if (IS_PF(bp) &&
+ !BP_NOMCP(bp) &&
+ (bp->flags & BC_SUPPORTS_RMMOD_CMD))
+ bnx2x_fw_command(bp, DRV_MSG_CODE_RMMOD, 0);
+
/* Close the interface - either directly or implicitly */
if (remove_netdev) {
unregister_netdev(dev);