arch/arm/mach-at91/board-usb-a926x.c - kernel/msm-4.9 - Gitiles

 /*
  * linux/arch/arm/mach-at91/board-usb-a926x.c
  *
  *  Copyright (C) 2005 SAN People
  *  Copyright (C) 2007 Atmel Corporation.
  *  Copyright (C) 2007 Calao-systems
  *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */

 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/spi/spi.h>
 #include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
 #include <linux/spi/mmc_spi.h>

 #include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>

 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>

 #include <mach/hardware.h>
 #include <mach/board.h>
 #include <mach/at91_aic.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>

 #include "sam9_smc.h"
 #include "generic.h"


 static void __init ek_init_early(void)
 {
 	/* Initialize processor: 12.00 MHz crystal */
 	at91_initialize(12000000);
 }

 /*
  * USB Host port
  */
 static struct at91_usbh_data __initdata ek_usbh_data = {
 	.ports		= 2,
 	.vbus_pin	= {-EINVAL, -EINVAL},
 	.overcurrent_pin= {-EINVAL, -EINVAL},
 };

 /*
  * USB Device port
  */
 static struct at91_udc_data __initdata ek_udc_data = {
 	.vbus_pin	= AT91_PIN_PB11,
 	.pullup_pin	= -EINVAL,		/* pull-up driven by UDC */
 };

 static void __init ek_add_device_udc(void)
 {
 	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
 		ek_udc_data.vbus_pin = AT91_PIN_PC5;

 	at91_add_device_udc(&ek_udc_data);
 }

 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 #define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
 static int at91_mmc_spi_init(struct device *dev,
 	irqreturn_t (*detect_int)(int, void *), void *data)
 {
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
 	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
 		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
 		"mmc-spi-detect", data);
 }

 static void at91_mmc_spi_exit(struct device *dev, void *data)
 {
 	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
 }

 static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
 	.init = at91_mmc_spi_init,
 	.exit = at91_mmc_spi_exit,
 	.detect_delay = 100, /* msecs */
 };
 #endif

 /*
  * SPI devices.
  */
 static struct spi_board_info usb_a9263_spi_devices[] = {
 #if !defined(CONFIG_MMC_AT91)
 	{	/* DataFlash chip */
 		.modalias	= "mtd_dataflash",
 		.chip_select	= 0,
 		.max_speed_hz	= 15 * 1000 * 1000,
 		.bus_num	= 0,
 	}
 #endif
 };

 static struct spi_board_info usb_a9g20_spi_devices[] = {
 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 	{
 		.modalias = "mmc_spi",
 		.max_speed_hz = 20000000,	/* max spi clock (SCK) speed in HZ */
 		.bus_num = 1,
 		.chip_select = 0,
 		.platform_data = &at91_mmc_spi_pdata,
 		.mode = SPI_MODE_3,
 	},
 #endif
 };

 static void __init ek_add_device_spi(void)
 {
 	if (machine_is_usb_a9263())
 		at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
 	else if (machine_is_usb_a9g20())
 		at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
 }

 /*
  * MACB Ethernet device
  */
 static struct macb_platform_data __initdata ek_macb_data = {
 	.phy_irq_pin	= AT91_PIN_PE31,
 	.is_rmii	= 1,
 };

 static void __init ek_add_device_eth(void)
 {
 	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
 		ek_macb_data.phy_irq_pin = AT91_PIN_PA31;

 	at91_add_device_eth(&ek_macb_data);
 }

 /*
  * NAND flash
  */
 static struct mtd_partition __initdata ek_nand_partition[] = {
 	{
 		.name	= "barebox",
 		.offset	= 0,
 		.size	= 3 * SZ_128K,
 	}, {
 		.name	= "bareboxenv",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_128K,
 	}, {
 		.name	= "bareboxenv2",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_128K,
 	}, {
 		.name	= "oftree",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= SZ_128K,
 	}, {
 		.name	= "kernel",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 4 * SZ_1M,
 	}, {
 		.name	= "rootfs",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= 120 * SZ_1M,
 	}, {
 		.name	= "data",
 		.offset	= MTDPART_OFS_NXTBLK,
 		.size	= MTDPART_SIZ_FULL,
 	}
 };

 static struct atmel_nand_data __initdata ek_nand_data = {
 	.ale		= 21,
 	.cle		= 22,
 	.det_pin	= -EINVAL,
 	.rdy_pin	= AT91_PIN_PA22,
 	.enable_pin	= AT91_PIN_PD15,
 	.ecc_mode	= NAND_ECC_SOFT,
 	.on_flash_bbt	= 1,
 	.parts		= ek_nand_partition,
 	.num_parts	= ARRAY_SIZE(ek_nand_partition),
 };

 static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
 	.ncs_read_setup		= 0,
 	.nrd_setup		= 1,
 	.ncs_write_setup	= 0,
 	.nwe_setup		= 1,

 	.ncs_read_pulse		= 3,
 	.nrd_pulse		= 3,
 	.ncs_write_pulse	= 3,
 	.nwe_pulse		= 3,

 	.read_cycle		= 5,
 	.write_cycle		= 5,

 	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
 	.tdf_cycles		= 2,
 };

 static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
 	.ncs_read_setup		= 0,
 	.nrd_setup		= 2,
 	.ncs_write_setup	= 0,
 	.nwe_setup		= 2,

 	.ncs_read_pulse		= 4,
 	.nrd_pulse		= 4,
 	.ncs_write_pulse	= 4,
 	.nwe_pulse		= 4,

 	.read_cycle		= 7,
 	.write_cycle		= 7,

 	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
 	.tdf_cycles		= 3,
 };

 static void __init ek_add_device_nand(void)
 {
 	if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
 		ek_nand_data.rdy_pin	= AT91_PIN_PC13;
 		ek_nand_data.enable_pin	= AT91_PIN_PC14;
 	}

 	/* configure chip-select 3 (NAND) */
 	if (machine_is_usb_a9g20())
 		sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
 	else
 		sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);

 	at91_add_device_nand(&ek_nand_data);
 }


 /*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 static struct gpio_keys_button ek_buttons[] = {
 	{	/* USER PUSH BUTTON */
 		.code		= KEY_ENTER,
 		.gpio		= AT91_PIN_PB10,
 		.active_low	= 1,
 		.desc		= "user_pb",
 		.wakeup		= 1,
 	}
 };

 static struct gpio_keys_platform_data ek_button_data = {
 	.buttons	= ek_buttons,
 	.nbuttons	= ARRAY_SIZE(ek_buttons),
 };

 static struct platform_device ek_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.num_resources	= 0,
 	.dev		= {
 		.platform_data	= &ek_button_data,
 	}
 };

 static void __init ek_add_device_buttons(void)
 {
 	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
 	at91_set_deglitch(AT91_PIN_PB10, 1);

 	platform_device_register(&ek_button_device);
 }
 #else
 static void __init ek_add_device_buttons(void) {}
 #endif

 /*
  * LEDs
  */
 static struct gpio_led ek_leds[] = {
 	{	/* user_led (green) */
 		.name			= "user_led",
 		.gpio			= AT91_PIN_PB21,
 		.active_low		= 1,
 		.default_trigger	= "heartbeat",
 	}
 };

 static struct i2c_board_info __initdata ek_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("rv3029c2", 0x56),
 	},
 };

 static void __init ek_add_device_leds(void)
 {
 	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
 		ek_leds[0].active_low = 0;

 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 }

 static void __init ek_board_init(void)
 {
 	/* Serial */
 	/* DBGU on ttyS0. (Rx & Tx only) */
 	at91_register_uart(0, 0, 0);
 	at91_add_device_serial();
 	/* USB Host */
 	at91_add_device_usbh(&ek_usbh_data);
 	/* USB Device */
 	ek_add_device_udc();
 	/* SPI */
 	ek_add_device_spi();
 	/* Ethernet */
 	ek_add_device_eth();
 	/* NAND */
 	ek_add_device_nand();
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* LEDs */
 	ek_add_device_leds();

 	if (machine_is_usb_a9g20()) {
 		/* I2C */
 		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
 	} else {
 		/* I2C */
 		at91_add_device_i2c(NULL, 0);
 		/* shutdown controller, wakeup button (5 msec low) */
 		at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
 				| AT91_SHDW_WKMODE0_LOW
 				| AT91_SHDW_RTTWKEN);
 	}
 }

 MACHINE_START(USB_A9263, "CALAO USB_A9263")
 	/* Maintainer: calao-systems */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

 MACHINE_START(USB_A9260, "CALAO USB_A9260")
 	/* Maintainer: calao-systems */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END

 MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
 	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
 	.timer		= &at91sam926x_timer,
 	.map_io		= at91_map_io,
 	.handle_irq	= at91_aic_handle_irq,
 	.init_early	= ek_init_early,
 	.init_irq	= at91_init_irq_default,
 	.init_machine	= ek_board_init,
 MACHINE_END
	/*
	* linux/arch/arm/mach-at91/board-usb-a926x.c
	*
	* Copyright (C) 2005 SAN People
	* Copyright (C) 2007 Atmel Corporation.
	* Copyright (C) 2007 Calao-systems
	* Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
	*/

	#include <linux/types.h>
	#include <linux/init.h>
	#include <linux/mm.h>
	#include <linux/module.h>
	#include <linux/platform_device.h>
	#include <linux/spi/spi.h>
	#include <linux/gpio_keys.h>
	#include <linux/gpio.h>
	#include <linux/input.h>
	#include <linux/spi/mmc_spi.h>

	#include <asm/setup.h>
	#include <asm/mach-types.h>
	#include <asm/irq.h>

	#include <asm/mach/arch.h>
	#include <asm/mach/map.h>
	#include <asm/mach/irq.h>

	#include <mach/hardware.h>
	#include <mach/board.h>
	#include <mach/at91_aic.h>
	#include <mach/at91sam9_smc.h>
	#include <mach/at91_shdwc.h>

	#include "sam9_smc.h"
	#include "generic.h"


	static void __init ek_init_early(void)
	{
	/* Initialize processor: 12.00 MHz crystal */
	at91_initialize(12000000);
	}

	/*
	* USB Host port
	*/
	static struct at91_usbh_data __initdata ek_usbh_data = {
	.ports = 2,
	.vbus_pin = {-EINVAL, -EINVAL},
	.overcurrent_pin= {-EINVAL, -EINVAL},
	};

	/*
	* USB Device port
	*/
	static struct at91_udc_data __initdata ek_udc_data = {
	.vbus_pin = AT91_PIN_PB11,
	.pullup_pin = -EINVAL, /* pull-up driven by UDC */
	};

	static void __init ek_add_device_udc(void)
	{
	if (machine_is_usb_a9260() \|\| machine_is_usb_a9g20())
	ek_udc_data.vbus_pin = AT91_PIN_PC5;

	at91_add_device_udc(&ek_udc_data);
	}

	#if defined(CONFIG_MMC_SPI) \|\| defined(CONFIG_MMC_SPI_MODULE)
	#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
	static int at91_mmc_spi_init(struct device *dev,
	irqreturn_t (detect_int)(int, void ), void *data)
	{
	/* Configure Interrupt pin as input, no pull-up */
	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
	IRQF_TRIGGER_FALLING \| IRQF_TRIGGER_RISING,
	"mmc-spi-detect", data);
	}

	static void at91_mmc_spi_exit(struct device dev, void data)
	{
	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
	}

	static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
	.init = at91_mmc_spi_init,
	.exit = at91_mmc_spi_exit,
	.detect_delay = 100, /* msecs */
	};
	#endif

	/*
	* SPI devices.
	*/
	static struct spi_board_info usb_a9263_spi_devices[] = {
	#if !defined(CONFIG_MMC_AT91)
	{ /* DataFlash chip */
	.modalias = "mtd_dataflash",
	.chip_select = 0,
	.max_speed_hz = 15 * 1000 * 1000,
	.bus_num = 0,
	}
	#endif
	};

	static struct spi_board_info usb_a9g20_spi_devices[] = {
	#if defined(CONFIG_MMC_SPI) \|\| defined(CONFIG_MMC_SPI_MODULE)
	{
	.modalias = "mmc_spi",
	.max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
	.bus_num = 1,
	.chip_select = 0,
	.platform_data = &at91_mmc_spi_pdata,
	.mode = SPI_MODE_3,
	},
	#endif
	};

	static void __init ek_add_device_spi(void)
	{
	if (machine_is_usb_a9263())
	at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
	else if (machine_is_usb_a9g20())
	at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
	}

	/*
	* MACB Ethernet device
	*/
	static struct macb_platform_data __initdata ek_macb_data = {
	.phy_irq_pin = AT91_PIN_PE31,
	.is_rmii = 1,
	};

	static void __init ek_add_device_eth(void)
	{
	if (machine_is_usb_a9260() \|\| machine_is_usb_a9g20())
	ek_macb_data.phy_irq_pin = AT91_PIN_PA31;

	at91_add_device_eth(&ek_macb_data);
	}

	/*
	* NAND flash
	*/
	static struct mtd_partition __initdata ek_nand_partition[] = {
	{
	.name = "barebox",
	.offset = 0,
	.size = 3 * SZ_128K,
	}, {
	.name = "bareboxenv",
	.offset = MTDPART_OFS_NXTBLK,
	.size = SZ_128K,
	}, {
	.name = "bareboxenv2",
	.offset = MTDPART_OFS_NXTBLK,
	.size = SZ_128K,
	}, {
	.name = "oftree",
	.offset = MTDPART_OFS_NXTBLK,
	.size = SZ_128K,
	}, {
	.name = "kernel",
	.offset = MTDPART_OFS_NXTBLK,
	.size = 4 * SZ_1M,
	}, {
	.name = "rootfs",
	.offset = MTDPART_OFS_NXTBLK,
	.size = 120 * SZ_1M,
	}, {
	.name = "data",
	.offset = MTDPART_OFS_NXTBLK,
	.size = MTDPART_SIZ_FULL,
	}
	};

	static struct atmel_nand_data __initdata ek_nand_data = {
	.ale = 21,
	.cle = 22,
	.det_pin = -EINVAL,
	.rdy_pin = AT91_PIN_PA22,
	.enable_pin = AT91_PIN_PD15,
	.ecc_mode = NAND_ECC_SOFT,
	.on_flash_bbt = 1,
	.parts = ek_nand_partition,
	.num_parts = ARRAY_SIZE(ek_nand_partition),
	};

	static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
	.ncs_read_setup = 0,
	.nrd_setup = 1,
	.ncs_write_setup = 0,
	.nwe_setup = 1,

	.ncs_read_pulse = 3,
	.nrd_pulse = 3,
	.ncs_write_pulse = 3,
	.nwe_pulse = 3,

	.read_cycle = 5,
	.write_cycle = 5,

	.mode = AT91_SMC_READMODE \| AT91_SMC_WRITEMODE \| AT91_SMC_EXNWMODE_DISABLE \| AT91_SMC_DBW_8,
	.tdf_cycles = 2,
	};

	static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
	.ncs_read_setup = 0,
	.nrd_setup = 2,
	.ncs_write_setup = 0,
	.nwe_setup = 2,

	.ncs_read_pulse = 4,
	.nrd_pulse = 4,
	.ncs_write_pulse = 4,
	.nwe_pulse = 4,

	.read_cycle = 7,
	.write_cycle = 7,

	.mode = AT91_SMC_READMODE \| AT91_SMC_WRITEMODE \| AT91_SMC_EXNWMODE_DISABLE \| AT91_SMC_DBW_8,
	.tdf_cycles = 3,
	};

	static void __init ek_add_device_nand(void)
	{
	if (machine_is_usb_a9260() \|\| machine_is_usb_a9g20()) {
	ek_nand_data.rdy_pin = AT91_PIN_PC13;
	ek_nand_data.enable_pin = AT91_PIN_PC14;
	}

	/* configure chip-select 3 (NAND) */
	if (machine_is_usb_a9g20())
	sam9_smc_configure(0, 3, &usb_a9g20_nand_smc_config);
	else
	sam9_smc_configure(0, 3, &usb_a9260_nand_smc_config);

	at91_add_device_nand(&ek_nand_data);
	}


	/*
	* GPIO Buttons
	*/
	#if defined(CONFIG_KEYBOARD_GPIO) \|\| defined(CONFIG_KEYBOARD_GPIO_MODULE)
	static struct gpio_keys_button ek_buttons[] = {
	{ /* USER PUSH BUTTON */
	.code = KEY_ENTER,
	.gpio = AT91_PIN_PB10,
	.active_low = 1,
	.desc = "user_pb",
	.wakeup = 1,
	}
	};

	static struct gpio_keys_platform_data ek_button_data = {
	.buttons = ek_buttons,
	.nbuttons = ARRAY_SIZE(ek_buttons),
	};

	static struct platform_device ek_button_device = {
	.name = "gpio-keys",
	.id = -1,
	.num_resources = 0,
	.dev = {
	.platform_data = &ek_button_data,
	}
	};

	static void __init ek_add_device_buttons(void)
	{
	at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* user push button, pull up enabled */
	at91_set_deglitch(AT91_PIN_PB10, 1);

	platform_device_register(&ek_button_device);
	}
	#else
	static void __init ek_add_device_buttons(void) {}
	#endif

	/*
	* LEDs
	*/
	static struct gpio_led ek_leds[] = {
	{ /* user_led (green) */
	.name = "user_led",
	.gpio = AT91_PIN_PB21,
	.active_low = 1,
	.default_trigger = "heartbeat",
	}
	};

	static struct i2c_board_info __initdata ek_i2c_devices[] = {
	{
	I2C_BOARD_INFO("rv3029c2", 0x56),
	},
	};

	static void __init ek_add_device_leds(void)
	{
	if (machine_is_usb_a9260() \|\| machine_is_usb_a9g20())
	ek_leds[0].active_low = 0;

	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
	}

	static void __init ek_board_init(void)
	{
	/* Serial */
	/* DBGU on ttyS0. (Rx & Tx only) */
	at91_register_uart(0, 0, 0);
	at91_add_device_serial();
	/* USB Host */
	at91_add_device_usbh(&ek_usbh_data);
	/* USB Device */
	ek_add_device_udc();
	/* SPI */
	ek_add_device_spi();
	/* Ethernet */
	ek_add_device_eth();
	/* NAND */
	ek_add_device_nand();
	/* Push Buttons */
	ek_add_device_buttons();
	/* LEDs */
	ek_add_device_leds();

	if (machine_is_usb_a9g20()) {
	/* I2C */
	at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
	} else {
	/* I2C */
	at91_add_device_i2c(NULL, 0);
	/* shutdown controller, wakeup button (5 msec low) */
	at91_shdwc_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
	\| AT91_SHDW_WKMODE0_LOW
	\| AT91_SHDW_RTTWKEN);
	}
	}

	MACHINE_START(USB_A9263, "CALAO USB_A9263")
	/* Maintainer: calao-systems */
	.timer = &at91sam926x_timer,
	.map_io = at91_map_io,
	.handle_irq = at91_aic_handle_irq,
	.init_early = ek_init_early,
	.init_irq = at91_init_irq_default,
	.init_machine = ek_board_init,
	MACHINE_END

	MACHINE_START(USB_A9260, "CALAO USB_A9260")
	/* Maintainer: calao-systems */
	.timer = &at91sam926x_timer,
	.map_io = at91_map_io,
	.handle_irq = at91_aic_handle_irq,
	.init_early = ek_init_early,
	.init_irq = at91_init_irq_default,
	.init_machine = ek_board_init,
	MACHINE_END

	MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
	.timer = &at91sam926x_timer,
	.map_io = at91_map_io,
	.handle_irq = at91_aic_handle_irq,
	.init_early = ek_init_early,
	.init_irq = at91_init_irq_default,
	.init_machine = ek_board_init,
	MACHINE_END