[libata] change ata_qc_complete() to take error mask as second arg
The second argument to ata_qc_complete() was being used for two
purposes: communicate the ATA Status register to the completion
function, and indicate an error. On legacy PCI IDE hardware, the latter
is often implicit in the former. On more modern hardware, the driver
often completely emulated a Status register value, passing ATA_ERR as an
indication that something went wrong.
Now that previous code changes have eliminated the need to use drv_stat
arg to communicate the ATA Status register value, we can convert it to a
mask of possible error classes.
This will lead to more flexible error handling in the future.
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index 63911f1..8f41702 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -399,7 +399,8 @@
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- ata_qc_complete(qc, ata_wait_idle(ap) | ATA_ERR);
+ drv_stat = ata_wait_idle(ap);
+ ata_qc_complete(qc, __ac_err_mask(drv_stat));
break;
default:
@@ -408,7 +409,7 @@
printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
ap->id, qc->tf.command, drv_stat);
- ata_qc_complete(qc, drv_stat);
+ ata_qc_complete(qc, ac_err_mask(drv_stat));
break;
}
@@ -420,24 +421,21 @@
static inline unsigned int pdc_host_intr( struct ata_port *ap,
struct ata_queued_cmd *qc)
{
- u8 status;
- unsigned int handled = 0, have_err = 0;
+ unsigned int handled = 0, err_mask = 0;
u32 tmp;
void __iomem *mmio = (void __iomem *) ap->ioaddr.cmd_addr + PDC_GLOBAL_CTL;
tmp = readl(mmio);
if (tmp & PDC_ERR_MASK) {
- have_err = 1;
+ err_mask = AC_ERR_DEV;
pdc_reset_port(ap);
}
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- status = ata_wait_idle(ap);
- if (have_err)
- status |= ATA_ERR;
- ata_qc_complete(qc, status);
+ err_mask |= ac_err_mask(ata_wait_idle(ap));
+ ata_qc_complete(qc, err_mask);
handled = 1;
break;