Merge branch 'depends/rmk/devel-stable' into next/board
The exynos4 updates conflict with code from the arm devel-stable branch
and new boards need to set atag_offset in place of boot_param.
Conflicts:
arch/arm/Kconfig
arch/arm/mach-exynos4/include/mach/entry-macro.S
arch/arm/mach-exynos4/mach-smdkc210.c
arch/arm/mach-exynos4/mach-smdkv310.c
arch/arm/mach-exynos4/mct.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4792d29..7bbb035 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -29,6 +29,7 @@
select HAVE_GENERIC_HARDIRQS
select HAVE_SPARSE_IRQ
select GENERIC_IRQ_SHOW
+ select CPU_PM if (SUSPEND || CPU_IDLE)
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@@ -195,7 +196,8 @@
The base address of exception vectors.
config ARM_PATCH_PHYS_VIRT
- bool "Patch physical to virtual translations at runtime"
+ bool "Patch physical to virtual translations at runtime" if EMBEDDED
+ default y
depends on !XIP_KERNEL && MMU
depends on !ARCH_REALVIEW || !SPARSEMEM
help
@@ -204,16 +206,25 @@
kernel in system memory.
This can only be used with non-XIP MMU kernels where the base
- of physical memory is at a 16MB boundary, or theoretically 64K
- for the MSM machine class.
+ of physical memory is at a 16MB boundary.
-config ARM_PATCH_PHYS_VIRT_16BIT
- def_bool y
- depends on ARM_PATCH_PHYS_VIRT && ARCH_MSM
+ Only disable this option if you know that you do not require
+ this feature (eg, building a kernel for a single machine) and
+ you need to shrink the kernel to the minimal size.
+
+config NEED_MACH_MEMORY_H
+ bool
help
- This option extends the physical to virtual translation patching
- to allow physical memory down to a theoretical minimum of 64K
- boundaries.
+ Select this when mach/memory.h is required to provide special
+ definitions for this platform. The need for mach/memory.h should
+ be avoided when possible.
+
+config PHYS_OFFSET
+ hex "Physical address of main memory"
+ depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+ help
+ Please provide the physical address corresponding to the
+ location of main memory in your system.
source "init/Kconfig"
@@ -246,6 +257,7 @@
select GENERIC_CLOCKEVENTS
select PLAT_VERSATILE
select PLAT_VERSATILE_FPGA_IRQ
+ select NEED_MACH_MEMORY_H
help
Support for ARM's Integrator platform.
@@ -261,6 +273,7 @@
select PLAT_VERSATILE_CLCD
select ARM_TIMER_SP804
select GPIO_PL061 if GPIOLIB
+ select NEED_MACH_MEMORY_H
help
This enables support for ARM Ltd RealView boards.
@@ -301,7 +314,6 @@
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
- select ARM_PATCH_PHYS_VIRT if MMU
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 and AT91CAP9 processors.
@@ -322,6 +334,7 @@
bool "Cirrus Logic CLPS711x/EP721x-based"
select CPU_ARM720T
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Cirrus Logic 711x/721x based boards.
@@ -362,6 +375,7 @@
select ISA
select NO_IOPORT
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
This is an evaluation board for the StrongARM processor available
from Digital. It has limited hardware on-board, including an
@@ -377,6 +391,7 @@
select ARCH_REQUIRE_GPIOLIB
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MEMORY_H
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -385,6 +400,7 @@
select CPU_SA110
select FOOTBRIDGE
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_MEMORY_H
help
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -434,6 +450,7 @@
select PCI
select ARCH_SUPPORTS_MSI
select VMSPLIT_1G
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IOP13XX (XScale) family of processors.
@@ -464,6 +481,7 @@
select CPU_XSC3
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP23xx (XScale) family of processors.
@@ -473,6 +491,7 @@
select CPU_XSCALE
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Intel's IXP2400/2800 (XScale) family of processors.
@@ -566,6 +585,7 @@
select CPU_ARM922T
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
System-on-Chip devices.
@@ -657,6 +677,7 @@
select SPARSE_IRQ
select MULTI_IRQ_HANDLER
select PM_GENERIC_DOMAINS if PM
+ select NEED_MACH_MEMORY_H
help
Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
@@ -671,6 +692,7 @@
select NO_IOPORT
select ARCH_SPARSEMEM_ENABLE
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
On the Acorn Risc-PC, Linux can support the internal IDE disk and
CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -689,6 +711,7 @@
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
+ select NEED_MACH_MEMORY_H
help
Support for StrongARM 11x0 based boards.
@@ -781,6 +804,7 @@
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung S5PV210/S5PC110 series based systems
@@ -797,6 +821,7 @@
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
+ select NEED_MACH_MEMORY_H
help
Samsung EXYNOS4 series based systems
@@ -808,6 +833,7 @@
select ZONE_DMA
select PCI
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_MEMORY_H
help
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -836,6 +862,7 @@
select HAVE_MACH_CLKDEV
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select NEED_MACH_MEMORY_H
help
Support for ST-Ericsson U300 series mobile platforms.
@@ -1408,6 +1435,31 @@
If you don't know what to do here, say Y.
+config ARM_CPU_TOPOLOGY
+ bool "Support cpu topology definition"
+ depends on SMP && CPU_V7
+ default y
+ help
+ Support ARM cpu topology definition. The MPIDR register defines
+ affinity between processors which is then used to describe the cpu
+ topology of an ARM System.
+
+config SCHED_MC
+ bool "Multi-core scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Multi-core scheduler support improves the CPU scheduler's decision
+ making when dealing with multi-core CPU chips at a cost of slightly
+ increased overhead in some places. If unsure say N here.
+
+config SCHED_SMT
+ bool "SMT scheduler support"
+ depends on ARM_CPU_TOPOLOGY
+ help
+ Improves the CPU scheduler's decision making when dealing with
+ MultiThreading at a cost of slightly increased overhead in some
+ places. If unsure say N here.
+
config HAVE_ARM_SCU
bool
help
@@ -1808,6 +1860,38 @@
endchoice
+config ARM_APPENDED_DTB
+ bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
+ depends on OF && !ZBOOT_ROM && EXPERIMENTAL
+ help
+ With this option, the boot code will look for a device tree binary
+ (DTB) appended to zImage
+ (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
+
+ This is meant as a backward compatibility convenience for those
+ systems with a bootloader that can't be upgraded to accommodate
+ the documented boot protocol using a device tree.
+
+ Beware that there is very little in terms of protection against
+ this option being confused by leftover garbage in memory that might
+ look like a DTB header after a reboot if no actual DTB is appended
+ to zImage. Do not leave this option active in a production kernel
+ if you don't intend to always append a DTB. Proper passing of the
+ location into r2 of a bootloader provided DTB is always preferable
+ to this option.
+
+config ARM_ATAG_DTB_COMPAT
+ bool "Supplement the appended DTB with traditional ATAG information"
+ depends on ARM_APPENDED_DTB
+ help
+ Some old bootloaders can't be updated to a DTB capable one, yet
+ they provide ATAGs with memory configuration, the ramdisk address,
+ the kernel cmdline string, etc. Such information is dynamically
+ provided by the bootloader and can't always be stored in a static
+ DTB. To allow a device tree enabled kernel to be used with such
+ bootloaders, this option allows zImage to extract the information
+ from the ATAG list and store it at run time into the appended DTB.
+
config CMDLINE
string "Default kernel command string"
default ""
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 81cbe40..be3a0f7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -129,4 +129,10 @@
The uncompressor code port configuration is now handled
by CONFIG_S3C_LOWLEVEL_UART_PORT.
+config ARM_KPROBES_TEST
+ tristate "Kprobes test module"
+ depends on KPROBES && MODULES
+ help
+ Perform tests of kprobes API and instruction set simulation.
+
endmenu
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 70c424e..5665c2a 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -128,6 +128,9 @@
ifeq ($(CONFIG_ARCH_SA1100),y)
textofs-$(CONFIG_SA1111) := 0x00208000
endif
+textofs-$(CONFIG_ARCH_MSM7X30) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
+textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore
index c602896..e0936a1 100644
--- a/arch/arm/boot/compressed/.gitignore
+++ b/arch/arm/boot/compressed/.gitignore
@@ -5,3 +5,12 @@
piggy.lzma
vmlinux
vmlinux.lds
+
+# borrowed libfdt files
+fdt.c
+fdt.h
+fdt_ro.c
+fdt_rw.c
+fdt_wip.c
+libfdt.h
+libfdt_internal.h
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0c74a6f..e4f32a8 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -26,6 +26,10 @@
OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
+# string library code (-Os is enforced to keep it much smaller)
+OBJS += string.o
+CFLAGS_string.o := -Os
+
#
# Architecture dependencies
#
@@ -89,21 +93,41 @@
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
+# Borrowed libfdt files for the ATAG compatibility mode
+
+libfdt := fdt_rw.c fdt_ro.c fdt_wip.c fdt.c
+libfdt_hdrs := fdt.h libfdt.h libfdt_internal.h
+
+libfdt_objs := $(addsuffix .o, $(basename $(libfdt)))
+
+$(addprefix $(obj)/,$(libfdt) $(libfdt_hdrs)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,shipped)
+
+$(addprefix $(obj)/,$(libfdt_objs) atags_to_fdt.o): \
+ $(addprefix $(obj)/,$(libfdt_hdrs))
+
+ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+OBJS += $(libfdt_objs) atags_to_fdt.o
+endif
+
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ lib1funcs.o lib1funcs.S font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
-extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S $(libfdt) $(libfdt_hdrs)
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
-ccflags-y := -fpic -fno-builtin
+ccflags-y := -fpic -fno-builtin -I$(obj)
asflags-y := -Wa,-march=all
+# Supply kernel BSS size to the decompressor via a linker symbol.
+KBSS_SZ = $(shell size $(obj)/../../../../vmlinux | awk 'END{print $$3}')
+LDFLAGS_vmlinux = --defsym _kernel_bss_size=$(KBSS_SZ)
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
@@ -123,7 +147,7 @@
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c
new file mode 100644
index 0000000..6ce11c4
--- /dev/null
+++ b/arch/arm/boot/compressed/atags_to_fdt.c
@@ -0,0 +1,97 @@
+#include <asm/setup.h>
+#include <libfdt.h>
+
+static int node_offset(void *fdt, const char *node_path)
+{
+ int offset = fdt_path_offset(fdt, node_path);
+ if (offset == -FDT_ERR_NOTFOUND)
+ offset = fdt_add_subnode(fdt, 0, node_path);
+ return offset;
+}
+
+static int setprop(void *fdt, const char *node_path, const char *property,
+ uint32_t *val_array, int size)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop(fdt, offset, property, val_array, size);
+}
+
+static int setprop_string(void *fdt, const char *node_path,
+ const char *property, const char *string)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_string(fdt, offset, property, string);
+}
+
+static int setprop_cell(void *fdt, const char *node_path,
+ const char *property, uint32_t val)
+{
+ int offset = node_offset(fdt, node_path);
+ if (offset < 0)
+ return offset;
+ return fdt_setprop_cell(fdt, offset, property, val);
+}
+
+/*
+ * Convert and fold provided ATAGs into the provided FDT.
+ *
+ * REturn values:
+ * = 0 -> pretend success
+ * = 1 -> bad ATAG (may retry with another possible ATAG pointer)
+ * < 0 -> error from libfdt
+ */
+int atags_to_fdt(void *atag_list, void *fdt, int total_space)
+{
+ struct tag *atag = atag_list;
+ uint32_t mem_reg_property[2 * NR_BANKS];
+ int memcount = 0;
+ int ret;
+
+ /* make sure we've got an aligned pointer */
+ if ((u32)atag_list & 0x3)
+ return 1;
+
+ /* if we get a DTB here we're done already */
+ if (*(u32 *)atag_list == fdt32_to_cpu(FDT_MAGIC))
+ return 0;
+
+ /* validate the ATAG */
+ if (atag->hdr.tag != ATAG_CORE ||
+ (atag->hdr.size != tag_size(tag_core) &&
+ atag->hdr.size != 2))
+ return 1;
+
+ /* let's give it all the room it could need */
+ ret = fdt_open_into(fdt, fdt, total_space);
+ if (ret < 0)
+ return ret;
+
+ for_each_tag(atag, atag_list) {
+ if (atag->hdr.tag == ATAG_CMDLINE) {
+ setprop_string(fdt, "/chosen", "bootargs",
+ atag->u.cmdline.cmdline);
+ } else if (atag->hdr.tag == ATAG_MEM) {
+ if (memcount >= sizeof(mem_reg_property)/4)
+ continue;
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start);
+ mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size);
+ } else if (atag->hdr.tag == ATAG_INITRD2) {
+ uint32_t initrd_start, initrd_size;
+ initrd_start = atag->u.initrd.start;
+ initrd_size = atag->u.initrd.size;
+ setprop_cell(fdt, "/chosen", "linux,initrd-start",
+ initrd_start);
+ setprop_cell(fdt, "/chosen", "linux,initrd-end",
+ initrd_start + initrd_size);
+ }
+ }
+
+ if (memcount)
+ setprop(fdt, "/memory", "reg", mem_reg_property, 4*memcount);
+
+ return fdt_pack(fdt);
+}
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index e95a598..c2effc9 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -216,6 +216,104 @@
mov r10, r6
#endif
+ mov r5, #0 @ init dtb size to 0
+#ifdef CONFIG_ARM_APPENDED_DTB
+/*
+ * r0 = delta
+ * r2 = BSS start
+ * r3 = BSS end
+ * r4 = final kernel address
+ * r5 = appended dtb size (still unknown)
+ * r6 = _edata
+ * r7 = architecture ID
+ * r8 = atags/device tree pointer
+ * r9 = size of decompressed image
+ * r10 = end of this image, including bss/stack/malloc space if non XIP
+ * r11 = GOT start
+ * r12 = GOT end
+ * sp = stack pointer
+ *
+ * if there are device trees (dtb) appended to zImage, advance r10 so that the
+ * dtb data will get relocated along with the kernel if necessary.
+ */
+
+ ldr lr, [r6, #0]
+#ifndef __ARMEB__
+ ldr r1, =0xedfe0dd0 @ sig is 0xd00dfeed big endian
+#else
+ ldr r1, =0xd00dfeed
+#endif
+ cmp lr, r1
+ bne dtb_check_done @ not found
+
+#ifdef CONFIG_ARM_ATAG_DTB_COMPAT
+ /*
+ * OK... Let's do some funky business here.
+ * If we do have a DTB appended to zImage, and we do have
+ * an ATAG list around, we want the later to be translated
+ * and folded into the former here. To be on the safe side,
+ * let's temporarily move the stack away into the malloc
+ * area. No GOT fixup has occurred yet, but none of the
+ * code we're about to call uses any global variable.
+ */
+ add sp, sp, #0x10000
+ stmfd sp!, {r0-r3, ip, lr}
+ mov r0, r8
+ mov r1, r6
+ sub r2, sp, r6
+ bl atags_to_fdt
+
+ /*
+ * If returned value is 1, there is no ATAG at the location
+ * pointed by r8. Try the typical 0x100 offset from start
+ * of RAM and hope for the best.
+ */
+ cmp r0, #1
+ sub r0, r4, #TEXT_OFFSET
+ add r0, r0, #0x100
+ mov r1, r6
+ sub r2, sp, r6
+ blne atags_to_fdt
+
+ ldmfd sp!, {r0-r3, ip, lr}
+ sub sp, sp, #0x10000
+#endif
+
+ mov r8, r6 @ use the appended device tree
+
+ /*
+ * Make sure that the DTB doesn't end up in the final
+ * kernel's .bss area. To do so, we adjust the decompressed
+ * kernel size to compensate if that .bss size is larger
+ * than the relocated code.
+ */
+ ldr r5, =_kernel_bss_size
+ adr r1, wont_overwrite
+ sub r1, r6, r1
+ subs r1, r5, r1
+ addhi r9, r9, r1
+
+ /* Get the dtb's size */
+ ldr r5, [r6, #4]
+#ifndef __ARMEB__
+ /* convert r5 (dtb size) to little endian */
+ eor r1, r5, r5, ror #16
+ bic r1, r1, #0x00ff0000
+ mov r5, r5, ror #8
+ eor r5, r5, r1, lsr #8
+#endif
+
+ /* preserve 64-bit alignment */
+ add r5, r5, #7
+ bic r5, r5, #7
+
+ /* relocate some pointers past the appended dtb */
+ add r6, r6, r5
+ add r10, r10, r5
+ add sp, sp, r5
+dtb_check_done:
+#endif
+
/*
* Check to see if we will overwrite ourselves.
* r4 = final kernel address
@@ -223,15 +321,14 @@
* r10 = end of this image, including bss/stack/malloc space if non XIP
* We basically want:
* r4 - 16k page directory >= r10 -> OK
- * r4 + image length <= current position (pc) -> OK
+ * r4 + image length <= address of wont_overwrite -> OK
*/
add r10, r10, #16384
cmp r4, r10
bhs wont_overwrite
add r10, r4, r9
- ARM( cmp r10, pc )
- THUMB( mov lr, pc )
- THUMB( cmp r10, lr )
+ adr r9, wont_overwrite
+ cmp r10, r9
bls wont_overwrite
/*
@@ -285,14 +382,16 @@
* r2 = BSS start
* r3 = BSS end
* r4 = kernel execution address
+ * r5 = appended dtb size (0 if not present)
* r7 = architecture ID
* r8 = atags pointer
* r11 = GOT start
* r12 = GOT end
* sp = stack pointer
*/
- teq r0, #0
+ orrs r1, r0, r5
beq not_relocated
+
add r11, r11, r0
add r12, r12, r0
@@ -307,12 +406,21 @@
/*
* Relocate all entries in the GOT table.
+ * Bump bss entries to _edata + dtb size
*/
1: ldr r1, [r11, #0] @ relocate entries in the GOT
- add r1, r1, r0 @ table. This fixes up the
- str r1, [r11], #4 @ C references.
+ add r1, r1, r0 @ This fixes up C references
+ cmp r1, r2 @ if entry >= bss_start &&
+ cmphs r3, r1 @ bss_end > entry
+ addhi r1, r1, r5 @ entry += dtb size
+ str r1, [r11], #4 @ next entry
cmp r11, r12
blo 1b
+
+ /* bump our bss pointers too */
+ add r2, r2, r5
+ add r3, r3, r5
+
#else
/*
diff --git a/arch/arm/boot/compressed/libfdt_env.h b/arch/arm/boot/compressed/libfdt_env.h
new file mode 100644
index 0000000..1f4e718
--- /dev/null
+++ b/arch/arm/boot/compressed/libfdt_env.h
@@ -0,0 +1,15 @@
+#ifndef _ARM_LIBFDT_ENV_H
+#define _ARM_LIBFDT_ENV_H
+
+#include <linux/types.h>
+#include <linux/string.h>
+#include <asm/byteorder.h>
+
+#define fdt16_to_cpu(x) be16_to_cpu(x)
+#define cpu_to_fdt16(x) cpu_to_be16(x)
+#define fdt32_to_cpu(x) be32_to_cpu(x)
+#define cpu_to_fdt32(x) cpu_to_be32(x)
+#define fdt64_to_cpu(x) be64_to_cpu(x)
+#define cpu_to_fdt64(x) cpu_to_be64(x)
+
+#endif
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 832d372..8e2a8fc 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,14 +18,9 @@
unsigned int __machine_arch_type;
-#define _LINUX_STRING_H_
-
#include <linux/compiler.h> /* for inline */
-#include <linux/types.h> /* for size_t */
-#include <linux/stddef.h> /* for NULL */
+#include <linux/types.h>
#include <linux/linkage.h>
-#include <asm/string.h>
-
static void putstr(const char *ptr);
extern void error(char *x);
@@ -101,41 +96,6 @@
flush();
}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i = 0;
- unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
-
- for (i = __n >> 3; i > 0; i--) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 2) {
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1 << 1) {
- *d++ = *s++;
- *d++ = *s++;
- }
-
- if (__n & 1)
- *d++ = *s++;
-
- return __dest;
-}
-
/*
* gzip declarations
*/
diff --git a/arch/arm/boot/compressed/string.c b/arch/arm/boot/compressed/string.c
new file mode 100644
index 0000000..36e53ef
--- /dev/null
+++ b/arch/arm/boot/compressed/string.c
@@ -0,0 +1,127 @@
+/*
+ * arch/arm/boot/compressed/string.c
+ *
+ * Small subset of simple string routines
+ */
+
+#include <linux/string.h>
+
+void *memcpy(void *__dest, __const void *__src, size_t __n)
+{
+ int i = 0;
+ unsigned char *d = (unsigned char *)__dest, *s = (unsigned char *)__src;
+
+ for (i = __n >> 3; i > 0; i--) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 2) {
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1 << 1) {
+ *d++ = *s++;
+ *d++ = *s++;
+ }
+
+ if (__n & 1)
+ *d++ = *s++;
+
+ return __dest;
+}
+
+void *memmove(void *__dest, __const void *__src, size_t count)
+{
+ unsigned char *d = __dest;
+ const unsigned char *s = __src;
+
+ if (__dest == __src)
+ return __dest;
+
+ if (__dest < __src)
+ return memcpy(__dest, __src, count);
+
+ while (count--)
+ d[count] = s[count];
+ return __dest;
+}
+
+size_t strlen(const char *s)
+{
+ const char *sc = s;
+
+ while (*sc != '\0')
+ sc++;
+ return sc - s;
+}
+
+int memcmp(const void *cs, const void *ct, size_t count)
+{
+ const unsigned char *su1 = cs, *su2 = ct, *end = su1 + count;
+ int res = 0;
+
+ while (su1 < end) {
+ res = *su1++ - *su2++;
+ if (res)
+ break;
+ }
+ return res;
+}
+
+int strcmp(const char *cs, const char *ct)
+{
+ unsigned char c1, c2;
+ int res = 0;
+
+ do {
+ c1 = *cs++;
+ c2 = *ct++;
+ res = c1 - c2;
+ if (res)
+ break;
+ } while (c1);
+ return res;
+}
+
+void *memchr(const void *s, int c, size_t count)
+{
+ const unsigned char *p = s;
+
+ while (count--)
+ if ((unsigned char)c == *p++)
+ return (void *)(p - 1);
+ return NULL;
+}
+
+char *strchr(const char *s, int c)
+{
+ while (*s != (char)c)
+ if (*s++ == '\0')
+ return NULL;
+ return (char *)s;
+}
+
+#undef memset
+
+void *memset(void *s, int c, size_t count)
+{
+ char *xs = s;
+ while (count--)
+ *xs++ = c;
+ return s;
+}
+
+void __memzero(void *s, size_t count)
+{
+ memset(s, 0, count);
+}
diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in
index 4e72883..4919f2a 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.in
+++ b/arch/arm/boot/compressed/vmlinux.lds.in
@@ -51,6 +51,10 @@
_got_start = .;
.got : { *(.got) }
_got_end = .;
+
+ /* ensure the zImage file size is always a multiple of 64 bits */
+ /* (without a dummy byte, ld just ignores the empty section) */
+ .pad : { BYTE(0); . = ALIGN(8); }
_edata = .;
. = BSS_START;
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index 3227ca9..016c1ae 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -26,8 +26,12 @@
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/smp.h>
+#include <linux/cpu_pm.h>
#include <linux/cpumask.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/percpu.h>
+#include <linux/slab.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
@@ -180,7 +184,7 @@
return -EINVAL;
mask = 0xff << shift;
- bit = 1 << (cpu + shift);
+ bit = 1 << (cpu_logical_map(cpu) + shift);
spin_lock(&irq_controller_lock);
val = readl_relaxed(reg) & ~mask;
@@ -259,9 +263,16 @@
unsigned int irq_start)
{
unsigned int gic_irqs, irq_limit, i;
+ u32 cpumask;
void __iomem *base = gic->dist_base;
- u32 cpumask = 1 << smp_processor_id();
+ u32 cpu = 0;
+ u32 nrppis = 0, ppi_base = 0;
+#ifdef CONFIG_SMP
+ cpu = cpu_logical_map(smp_processor_id());
+#endif
+
+ cpumask = 1 << cpu;
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
@@ -276,6 +287,25 @@
if (gic_irqs > 1020)
gic_irqs = 1020;
+ gic->gic_irqs = gic_irqs;
+
+ /*
+ * Nobody would be insane enough to use PPIs on a secondary
+ * GIC, right?
+ */
+ if (gic == &gic_data[0]) {
+ nrppis = (32 - irq_start) & 31;
+
+ /* The GIC only supports up to 16 PPIs. */
+ if (nrppis > 16)
+ BUG();
+
+ ppi_base = gic->irq_offset + 32 - nrppis;
+ }
+
+ pr_info("Configuring GIC with %d sources (%d PPIs)\n",
+ gic_irqs, (gic == &gic_data[0]) ? nrppis : 0);
+
/*
* Set all global interrupts to be level triggered, active low.
*/
@@ -311,7 +341,17 @@
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < irq_limit; i++) {
+ for (i = 0; i < nrppis; i++) {
+ int ppi = i + ppi_base;
+
+ irq_set_percpu_devid(ppi);
+ irq_set_chip_and_handler(ppi, &gic_chip,
+ handle_percpu_devid_irq);
+ irq_set_chip_data(ppi, gic);
+ set_irq_flags(ppi, IRQF_VALID | IRQF_NOAUTOEN);
+ }
+
+ for (i = irq_start + nrppis; i < irq_limit; i++) {
irq_set_chip_and_handler(i, &gic_chip, handle_fasteoi_irq);
irq_set_chip_data(i, gic);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
@@ -343,6 +383,189 @@
writel_relaxed(1, base + GIC_CPU_CTRL);
}
+#ifdef CONFIG_CPU_PM
+/*
+ * Saves the GIC distributor registers during suspend or idle. Must be called
+ * with interrupts disabled but before powering down the GIC. After calling
+ * this function, no interrupts will be delivered by the GIC, and another
+ * platform-specific wakeup source must be enabled.
+ */
+static void gic_dist_save(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ void __iomem *dist_base;
+ int i;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ gic_data[gic_nr].saved_spi_conf[i] =
+ readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ gic_data[gic_nr].saved_spi_target[i] =
+ readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ gic_data[gic_nr].saved_spi_enable[i] =
+ readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+}
+
+/*
+ * Restores the GIC distributor registers during resume or when coming out of
+ * idle. Must be called before enabling interrupts. If a level interrupt
+ * that occured while the GIC was suspended is still present, it will be
+ * handled normally, but any edge interrupts that occured will not be seen by
+ * the GIC and need to be handled by the platform-specific wakeup source.
+ */
+static void gic_dist_restore(unsigned int gic_nr)
+{
+ unsigned int gic_irqs;
+ unsigned int i;
+ void __iomem *dist_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ gic_irqs = gic_data[gic_nr].gic_irqs;
+ dist_base = gic_data[gic_nr].dist_base;
+
+ if (!dist_base)
+ return;
+
+ writel_relaxed(0, dist_base + GIC_DIST_CTRL);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_conf[i],
+ dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(0xa0a0a0a0,
+ dist_base + GIC_DIST_PRI + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_target[i],
+ dist_base + GIC_DIST_TARGET + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++)
+ writel_relaxed(gic_data[gic_nr].saved_spi_enable[i],
+ dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ writel_relaxed(1, dist_base + GIC_DIST_CTRL);
+}
+
+static void gic_cpu_save(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4);
+
+}
+
+static void gic_cpu_restore(unsigned int gic_nr)
+{
+ int i;
+ u32 *ptr;
+ void __iomem *dist_base;
+ void __iomem *cpu_base;
+
+ if (gic_nr >= MAX_GIC_NR)
+ BUG();
+
+ dist_base = gic_data[gic_nr].dist_base;
+ cpu_base = gic_data[gic_nr].cpu_base;
+
+ if (!dist_base || !cpu_base)
+ return;
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable);
+ for (i = 0; i < DIV_ROUND_UP(32, 32); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4);
+
+ ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf);
+ for (i = 0; i < DIV_ROUND_UP(32, 16); i++)
+ writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4);
+
+ for (i = 0; i < DIV_ROUND_UP(32, 4); i++)
+ writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4);
+
+ writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK);
+ writel_relaxed(1, cpu_base + GIC_CPU_CTRL);
+}
+
+static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v)
+{
+ int i;
+
+ for (i = 0; i < MAX_GIC_NR; i++) {
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ gic_cpu_save(i);
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ gic_cpu_restore(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER:
+ gic_dist_save(i);
+ break;
+ case CPU_CLUSTER_PM_ENTER_FAILED:
+ case CPU_CLUSTER_PM_EXIT:
+ gic_dist_restore(i);
+ break;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block gic_notifier_block = {
+ .notifier_call = gic_notifier,
+};
+
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+ gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_enable);
+
+ gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4,
+ sizeof(u32));
+ BUG_ON(!gic->saved_ppi_conf);
+
+ cpu_pm_register_notifier(&gic_notifier_block);
+}
+#else
+static void __init gic_pm_init(struct gic_chip_data *gic)
+{
+}
+#endif
+
void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
@@ -358,8 +581,10 @@
if (gic_nr == 0)
gic_cpu_base_addr = cpu_base;
+ gic_chip.flags |= gic_arch_extn.flags;
gic_dist_init(gic, irq_start);
gic_cpu_init(gic);
+ gic_pm_init(gic);
}
void __cpuinit gic_secondary_init(unsigned int gic_nr)
@@ -369,20 +594,15 @@
gic_cpu_init(&gic_data[gic_nr]);
}
-void __cpuinit gic_enable_ppi(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- irq_set_status_flags(irq, IRQ_NOPROBE);
- gic_unmask_irq(irq_get_irq_data(irq));
- local_irq_restore(flags);
-}
-
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
- unsigned long map = *cpus_addr(*mask);
+ int cpu;
+ unsigned long map = 0;
+
+ /* Convert our logical CPU mask into a physical one. */
+ for_each_cpu(cpu, mask)
+ map |= 1 << cpu_logical_map(cpu);
/*
* Ensure that stores to Normal memory are visible to the
diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h
index cd4458f..cb47d28 100644
--- a/arch/arm/include/asm/cputype.h
+++ b/arch/arm/include/asm/cputype.h
@@ -8,6 +8,7 @@
#define CPUID_CACHETYPE 1
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
+#define CPUID_MPIDR 5
#define CPUID_EXT_PFR0 "c1, 0"
#define CPUID_EXT_PFR1 "c1, 1"
@@ -70,6 +71,11 @@
return read_cpuid(CPUID_TCM);
}
+static inline unsigned int __attribute_const__ read_cpuid_mpidr(void)
+{
+ return read_cpuid(CPUID_MPIDR);
+}
+
/*
* Intel's XScale3 core supports some v6 features (supersections, L2)
* but advertises itself as v5 as it does not support the v6 ISA. For
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index 7a21d0b..7f27fab 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -205,6 +205,13 @@
int dma_mmap_writecombine(struct device *, struct vm_area_struct *,
void *, dma_addr_t, size_t);
+/*
+ * This can be called during boot to increase the size of the consistent
+ * DMA region above it's default value of 2MB. It must be called before the
+ * memory allocator is initialised, i.e. before any core_initcall.
+ */
+extern void __init init_consistent_dma_size(unsigned long size);
+
#ifdef CONFIG_DMABOUNCE
/*
diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S
index 2f1e209..88d6181 100644
--- a/arch/arm/include/asm/entry-macro-multi.S
+++ b/arch/arm/include/asm/entry-macro-multi.S
@@ -25,13 +25,6 @@
movne r1, sp
adrne lr, BSYM(1b)
bne do_IPI
-
-#ifdef CONFIG_LOCAL_TIMERS
- test_for_ltirq r0, r2, r6, lr
- movne r0, sp
- adrne lr, BSYM(1b)
- bne do_local_timer
-#endif
#endif
9997:
.endm
diff --git a/arch/arm/include/asm/exception.h b/arch/arm/include/asm/exception.h
new file mode 100644
index 0000000..5abaf5b
--- /dev/null
+++ b/arch/arm/include/asm/exception.h
@@ -0,0 +1,19 @@
+/*
+ * Annotations for marking C functions as exception handlers.
+ *
+ * These should only be used for C functions that are called from the low
+ * level exception entry code and not any intervening C code.
+ */
+#ifndef __ASM_ARM_EXCEPTION_H
+#define __ASM_ARM_EXCEPTION_H
+
+#include <linux/ftrace.h>
+
+#define __exception __attribute__((section(".exception.text")))
+#ifdef CONFIG_FUNCTION_GRAPH_TRACER
+#define __exception_irq_entry __irq_entry
+#else
+#define __exception_irq_entry __exception
+#endif
+
+#endif /* __ASM_ARM_EXCEPTION_H */
diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h
index 89ad180..ddf07a9 100644
--- a/arch/arm/include/asm/hardirq.h
+++ b/arch/arm/include/asm/hardirq.h
@@ -9,9 +9,6 @@
typedef struct {
unsigned int __softirq_pending;
-#ifdef CONFIG_LOCAL_TIMERS
- unsigned int local_timer_irqs;
-#endif
#ifdef CONFIG_SMP
unsigned int ipi_irqs[NR_IPI];
#endif
diff --git a/arch/arm/include/asm/hardware/entry-macro-gic.S b/arch/arm/include/asm/hardware/entry-macro-gic.S
index c115b82..74ebc80 100644
--- a/arch/arm/include/asm/hardware/entry-macro-gic.S
+++ b/arch/arm/include/asm/hardware/entry-macro-gic.S
@@ -22,15 +22,11 @@
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 16-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
@@ -43,7 +39,7 @@
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -62,14 +58,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
-/* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 435d3f8..14867e1 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -40,12 +40,19 @@
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
-void gic_enable_ppi(unsigned int);
struct gic_chip_data {
unsigned int irq_offset;
void __iomem *dist_base;
void __iomem *cpu_base;
+#ifdef CONFIG_CPU_PM
+ u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)];
+ u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)];
+ u32 saved_spi_target[DIV_ROUND_UP(1020, 4)];
+ u32 __percpu *saved_ppi_enable;
+ u32 __percpu *saved_ppi_conf;
+#endif
+ unsigned int gic_irqs;
};
#endif
diff --git a/arch/arm/include/asm/hw_breakpoint.h b/arch/arm/include/asm/hw_breakpoint.h
index f389b27..c190bc9 100644
--- a/arch/arm/include/asm/hw_breakpoint.h
+++ b/arch/arm/include/asm/hw_breakpoint.h
@@ -50,6 +50,7 @@
#define ARM_DEBUG_ARCH_V6_1 2
#define ARM_DEBUG_ARCH_V7_ECP14 3
#define ARM_DEBUG_ARCH_V7_MM 4
+#define ARM_DEBUG_ARCH_V7_1 5
/* Breakpoint */
#define ARM_BREAKPOINT_EXECUTE 0
@@ -57,6 +58,7 @@
/* Watchpoints */
#define ARM_BREAKPOINT_LOAD 1
#define ARM_BREAKPOINT_STORE 2
+#define ARM_FSR_ACCESS_MASK (1 << 11)
/* Privilege Levels */
#define ARM_BREAKPOINT_PRIV 1
diff --git a/arch/arm/include/asm/localtimer.h b/arch/arm/include/asm/localtimer.h
index 080d74f..f5e1cec 100644
--- a/arch/arm/include/asm/localtimer.h
+++ b/arch/arm/include/asm/localtimer.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_LOCALTIMER_H
#define __ASM_ARM_LOCALTIMER_H
+#include <linux/interrupt.h>
+
struct clock_event_device;
/*
@@ -17,27 +19,20 @@
*/
void percpu_timer_setup(void);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
-
#ifdef CONFIG_LOCAL_TIMERS
#ifdef CONFIG_HAVE_ARM_TWD
#include "smp_twd.h"
-#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop(c) twd_timer_stop((c))
#else
/*
- * Platform provides this to acknowledge a local timer IRQ.
- * Returns true if the local timer IRQ is to be processed.
+ * Stop the local timer
*/
-int local_timer_ack(void);
+void local_timer_stop(struct clock_event_device *);
#endif
@@ -52,6 +47,10 @@
{
return -ENXIO;
}
+
+static inline void local_timer_stop(struct clock_event_device *evt)
+{
+}
#endif
#endif
diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h
index 217aa191..727da11 100644
--- a/arch/arm/include/asm/mach/arch.h
+++ b/arch/arm/include/asm/mach/arch.h
@@ -17,7 +17,7 @@
struct machine_desc {
unsigned int nr; /* architecture number */
const char *name; /* architecture name */
- unsigned long boot_params; /* tagged list */
+ unsigned long atag_offset; /* tagged list (relative) */
const char **dt_compat; /* array of device tree
* 'compatible' strings */
diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h
index d2fedb5..b36f365 100644
--- a/arch/arm/include/asm/mach/map.h
+++ b/arch/arm/include/asm/mach/map.h
@@ -29,6 +29,7 @@
#define MT_MEMORY_NONCACHED 11
#define MT_MEMORY_DTCM 12
#define MT_MEMORY_ITCM 13
+#define MT_MEMORY_SO 14
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index b8de516..a8997d7 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -16,9 +16,12 @@
#include <linux/compiler.h>
#include <linux/const.h>
#include <linux/types.h>
-#include <mach/memory.h>
#include <asm/sizes.h>
+#ifdef CONFIG_NEED_MACH_MEMORY_H
+#include <mach/memory.h>
+#endif
+
/*
* Allow for constants defined here to be used from assembly code
* by prepending the UL suffix only with actual C code compilation.
@@ -77,16 +80,7 @@
*/
#define IOREMAP_MAX_ORDER 24
-/*
- * Size of DMA-consistent memory region. Must be multiple of 2M,
- * between 2MB and 14MB inclusive.
- */
-#ifndef CONSISTENT_DMA_SIZE
-#define CONSISTENT_DMA_SIZE SZ_2M
-#endif
-
#define CONSISTENT_END (0xffe00000UL)
-#define CONSISTENT_BASE (CONSISTENT_END - CONSISTENT_DMA_SIZE)
#else /* CONFIG_MMU */
@@ -160,7 +154,6 @@
* so that all we need to do is modify the 8-bit constant field.
*/
#define __PV_BITS_31_24 0x81000000
-#define __PV_BITS_23_16 0x00810000
extern unsigned long __pv_phys_offset;
#define PHYS_OFFSET __pv_phys_offset
@@ -178,9 +171,6 @@
{
unsigned long t;
__pv_stub(x, t, "add", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- __pv_stub(t, t, "add", __PV_BITS_23_16);
-#endif
return t;
}
@@ -188,9 +178,6 @@
{
unsigned long t;
__pv_stub(x, t, "sub", __PV_BITS_31_24);
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- __pv_stub(t, t, "sub", __PV_BITS_23_16);
-#endif
return t;
}
#else
@@ -200,7 +187,11 @@
#endif
#ifndef PHYS_OFFSET
+#ifdef PLAT_PHYS_OFFSET
#define PHYS_OFFSET PLAT_PHYS_OFFSET
+#else
+#define PHYS_OFFSET UL(CONFIG_PHYS_OFFSET)
+#endif
#endif
/*
diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h
index 543b449..6c6809f 100644
--- a/arch/arm/include/asm/module.h
+++ b/arch/arm/include/asm/module.h
@@ -31,11 +31,7 @@
/* Add __virt_to_phys patching state as well */
#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v16 "
-#else
#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#endif
#else
#define MODULE_ARCH_VERMAGIC_P2V ""
#endif
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 5750704..f1956b2 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -232,6 +232,9 @@
#define pgprot_writecombine(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#define pgprot_stronglyordered(prot) \
+ __pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
+
#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
#define pgprot_dmacoherent(prot) \
__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE | L_PTE_XN)
diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h
index b7e82c4..71d99b8 100644
--- a/arch/arm/include/asm/pmu.h
+++ b/arch/arm/include/asm/pmu.h
@@ -13,7 +13,12 @@
#define __ARM_PMU_H__
#include <linux/interrupt.h>
+#include <linux/perf_event.h>
+/*
+ * Types of PMUs that can be accessed directly and require mutual
+ * exclusion between profiling tools.
+ */
enum arm_pmu_type {
ARM_PMU_DEVICE_CPU = 0,
ARM_NUM_PMU_DEVICES,
@@ -37,21 +42,17 @@
* reserve_pmu() - reserve the hardware performance counters
*
* Reserve the hardware performance counters in the system for exclusive use.
- * The platform_device for the system is returned on success, ERR_PTR()
- * encoded error on failure.
+ * Returns 0 on success or -EBUSY if the lock is already held.
*/
-extern struct platform_device *
+extern int
reserve_pmu(enum arm_pmu_type type);
/**
* release_pmu() - Relinquish control of the performance counters
*
* Release the performance counters and allow someone else to use them.
- * Callers must have disabled the counters and released IRQs before calling
- * this. The platform_device returned from reserve_pmu() must be passed as
- * a cookie.
*/
-extern int
+extern void
release_pmu(enum arm_pmu_type type);
/**
@@ -68,24 +69,78 @@
#include <linux/err.h>
-static inline struct platform_device *
+static inline int
reserve_pmu(enum arm_pmu_type type)
{
- return ERR_PTR(-ENODEV);
-}
-
-static inline int
-release_pmu(enum arm_pmu_type type)
-{
return -ENODEV;
}
-static inline int
-init_pmu(enum arm_pmu_type type)
-{
- return -ENODEV;
-}
+static inline void
+release_pmu(enum arm_pmu_type type) { }
#endif /* CONFIG_CPU_HAS_PMU */
+#ifdef CONFIG_HW_PERF_EVENTS
+
+/* The events for a given PMU register set. */
+struct pmu_hw_events {
+ /*
+ * The events that are active on the PMU for the given index.
+ */
+ struct perf_event **events;
+
+ /*
+ * A 1 bit for an index indicates that the counter is being used for
+ * an event. A 0 means that the counter can be used.
+ */
+ unsigned long *used_mask;
+
+ /*
+ * Hardware lock to serialize accesses to PMU registers. Needed for the
+ * read/modify/write sequences.
+ */
+ raw_spinlock_t pmu_lock;
+};
+
+struct arm_pmu {
+ struct pmu pmu;
+ enum arm_perf_pmu_ids id;
+ enum arm_pmu_type type;
+ cpumask_t active_irqs;
+ const char *name;
+ irqreturn_t (*handle_irq)(int irq_num, void *dev);
+ void (*enable)(struct hw_perf_event *evt, int idx);
+ void (*disable)(struct hw_perf_event *evt, int idx);
+ int (*get_event_idx)(struct pmu_hw_events *hw_events,
+ struct hw_perf_event *hwc);
+ int (*set_event_filter)(struct hw_perf_event *evt,
+ struct perf_event_attr *attr);
+ u32 (*read_counter)(int idx);
+ void (*write_counter)(int idx, u32 val);
+ void (*start)(void);
+ void (*stop)(void);
+ void (*reset)(void *);
+ int (*map_event)(struct perf_event *event);
+ int num_events;
+ atomic_t active_events;
+ struct mutex reserve_mutex;
+ u64 max_period;
+ struct platform_device *plat_device;
+ struct pmu_hw_events *(*get_hw_events)(void);
+};
+
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type);
+
+u64 armpmu_event_update(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx, int overflow);
+
+int armpmu_event_set_period(struct perf_event *event,
+ struct hw_perf_event *hwc,
+ int idx);
+
+#endif /* CONFIG_HW_PERF_EVENTS */
+
#endif /* __ARM_PMU_H__ */
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 633d1cb..9e92cb20 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -81,6 +81,10 @@
extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm);
extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext);
extern void cpu_reset(unsigned long addr) __attribute__((noreturn));
+
+/* These three are private to arch/arm/kernel/suspend.c */
+extern void cpu_do_suspend(void *);
+extern void cpu_do_resume(void *);
#else
#define cpu_proc_init processor._proc_init
#define cpu_proc_fin processor._proc_fin
@@ -89,6 +93,10 @@
#define cpu_dcache_clean_area processor.dcache_clean_area
#define cpu_set_pte_ext processor.set_pte_ext
#define cpu_do_switch_mm processor.switch_mm
+
+/* These three are private to arch/arm/kernel/suspend.c */
+#define cpu_do_suspend processor.do_suspend
+#define cpu_do_resume processor.do_resume
#endif
extern void cpu_resume(void);
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index e42d96a..1e5717a 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -33,6 +33,11 @@
asmlinkage void do_IPI(int ipinr, struct pt_regs *regs);
/*
+ * Called from C code, this handles an IPI.
+ */
+void handle_IPI(int ipinr, struct pt_regs *regs);
+
+/*
* Setup the set of possible CPUs (via set_cpu_possible)
*/
extern void smp_init_cpus(void);
@@ -66,6 +71,12 @@
extern void platform_smp_prepare_cpus(unsigned int);
/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[NR_CPUS];
+#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
+
+/*
* Initial data for bringing up a secondary CPU.
*/
struct secondary_data {
@@ -88,9 +99,4 @@
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
-/*
- * show local interrupt info
- */
-extern void show_local_irqs(struct seq_file *, int);
-
#endif /* ifndef __ASM_ARM_SMP_H */
diff --git a/arch/arm/include/asm/smp_twd.h b/arch/arm/include/asm/smp_twd.h
index fed9981..ef9ffba9 100644
--- a/arch/arm/include/asm/smp_twd.h
+++ b/arch/arm/include/asm/smp_twd.h
@@ -22,7 +22,7 @@
extern void __iomem *twd_base;
-int twd_timer_ack(void);
void twd_timer_setup(struct clock_event_device *);
+void twd_timer_stop(struct clock_event_device *);
#endif
diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h
index b0e4e1a..1c0a551 100644
--- a/arch/arm/include/asm/suspend.h
+++ b/arch/arm/include/asm/suspend.h
@@ -1,22 +1,7 @@
#ifndef __ASM_ARM_SUSPEND_H
#define __ASM_ARM_SUSPEND_H
-#include <asm/memory.h>
-#include <asm/tlbflush.h>
-
extern void cpu_resume(void);
-
-/*
- * Hide the first two arguments to __cpu_suspend - these are an implementation
- * detail which platform code shouldn't have to know about.
- */
-static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
-{
- extern int __cpu_suspend(int, long, unsigned long,
- int (*)(unsigned long));
- int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
- flush_tlb_all();
- return ret;
-}
+extern int cpu_suspend(unsigned long, int (*)(unsigned long));
#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index 832888d..ed6b049 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -62,13 +62,6 @@
#include <asm/outercache.h>
-#define __exception __attribute__((section(".exception.text")))
-#ifdef CONFIG_FUNCTION_GRAPH_TRACER
-#define __exception_irq_entry __irq_entry
-#else
-#define __exception_irq_entry __exception
-#endif
-
struct thread_info;
struct task_struct;
diff --git a/arch/arm/include/asm/topology.h b/arch/arm/include/asm/topology.h
index accbd7c..a7e457e 100644
--- a/arch/arm/include/asm/topology.h
+++ b/arch/arm/include/asm/topology.h
@@ -1,6 +1,39 @@
#ifndef _ASM_ARM_TOPOLOGY_H
#define _ASM_ARM_TOPOLOGY_H
+#ifdef CONFIG_ARM_CPU_TOPOLOGY
+
+#include <linux/cpumask.h>
+
+struct cputopo_arm {
+ int thread_id;
+ int core_id;
+ int socket_id;
+ cpumask_t thread_sibling;
+ cpumask_t core_sibling;
+};
+
+extern struct cputopo_arm cpu_topology[NR_CPUS];
+
+#define topology_physical_package_id(cpu) (cpu_topology[cpu].socket_id)
+#define topology_core_id(cpu) (cpu_topology[cpu].core_id)
+#define topology_core_cpumask(cpu) (&cpu_topology[cpu].core_sibling)
+#define topology_thread_cpumask(cpu) (&cpu_topology[cpu].thread_sibling)
+
+#define mc_capable() (cpu_topology[0].socket_id != -1)
+#define smt_capable() (cpu_topology[0].thread_id != -1)
+
+void init_cpu_topology(void);
+void store_cpu_topology(unsigned int cpuid);
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu);
+
+#else
+
+static inline void init_cpu_topology(void) { }
+static inline void store_cpu_topology(unsigned int cpuid) { }
+
+#endif
+
#include <asm-generic/topology.h>
#endif /* _ASM_ARM_TOPOLOGY_H */
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f7887dc..7cac26c 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -29,7 +29,7 @@
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
-obj-$(CONFIG_PM_SLEEP) += sleep.o
+obj-$(CONFIG_PM_SLEEP) += sleep.o suspend.o
obj-$(CONFIG_HAVE_SCHED_CLOCK) += sched_clock.o
obj-$(CONFIG_SMP) += smp.o smp_tlb.o
obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
@@ -43,6 +43,13 @@
else
obj-$(CONFIG_KPROBES) += kprobes-arm.o
endif
+obj-$(CONFIG_ARM_KPROBES_TEST) += test-kprobes.o
+test-kprobes-objs := kprobes-test.o
+ifdef CONFIG_THUMB2_KERNEL
+test-kprobes-objs += kprobes-test-thumb.o
+else
+test-kprobes-objs += kprobes-test-arm.o
+endif
obj-$(CONFIG_ATAGS_PROC) += atags.o
obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_ARM_THUMBEE) += thumbee.o
@@ -66,6 +73,7 @@
obj-$(CONFIG_CPU_HAS_PMU) += pmu.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
+obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
ifneq ($(CONFIG_ARCH_EBSA110),y)
obj-y += io.o
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index bcd66e0..b7685f1 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -22,7 +22,7 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.endm
#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7)
@@ -106,7 +106,7 @@
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
- addruart \tmp1, \tmp2
+ addruart \tmp1, \tmp2, \rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 742b610..673c806 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -95,7 +95,7 @@
sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
add r8, r8, r4 @ PHYS_OFFSET
#else
- ldr r8, =PLAT_PHYS_OFFSET
+ ldr r8, =PHYS_OFFSET @ always constant in this case
#endif
/*
@@ -234,7 +234,7 @@
* This allows debug messages to be output
* via a serial console before paging_init.
*/
- addruart r7, r3
+ addruart r7, r3, r0
mov r3, r3, lsr #20
mov r3, r3, lsl #2
@@ -488,13 +488,8 @@
add r5, r5, r3 @ adjust table end address
add r7, r7, r3 @ adjust __pv_phys_offset address
str r8, [r7] @ save computed PHYS_OFFSET to __pv_phys_offset
-#ifndef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
mov r6, r3, lsr #24 @ constant for add/sub instructions
teq r3, r6, lsl #24 @ must be 16MiB aligned
-#else
- mov r6, r3, lsr #16 @ constant for add/sub instructions
- teq r3, r6, lsl #16 @ must be 64kiB aligned
-#endif
THUMB( it ne @ cross section branch )
bne __error
str r6, [r7, #4] @ save to __pv_offset
@@ -510,20 +505,8 @@
.text
__fixup_a_pv_table:
#ifdef CONFIG_THUMB2_KERNEL
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- lsls r0, r6, #24
- lsr r6, #8
- beq 1f
- clz r7, r0
- lsr r0, #24
- lsl r0, r7
- bic r0, 0x0080
- lsrs r7, #1
- orrcs r0, #0x0080
- orr r0, r0, r7, lsl #12
-#endif
-1: lsls r6, #24
- beq 4f
+ lsls r6, #24
+ beq 2f
clz r7, r6
lsr r6, #24
lsl r6, r7
@@ -532,43 +515,25 @@
orrcs r6, #0x0080
orr r6, r6, r7, lsl #12
orr r6, #0x4000
- b 4f
-2: @ at this point the C flag is always clear
- add r7, r3
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- ldrh ip, [r7]
- tst ip, 0x0400 @ the i bit tells us LS or MS byte
- beq 3f
- cmp r0, #0 @ set C flag, and ...
- biceq ip, 0x0400 @ immediate zero value has a special encoding
- streqh ip, [r7] @ that requires the i bit cleared
-#endif
-3: ldrh ip, [r7, #2]
+ b 2f
+1: add r7, r3
+ ldrh ip, [r7, #2]
and ip, 0x8f00
- orrcc ip, r6 @ mask in offset bits 31-24
- orrcs ip, r0 @ mask in offset bits 23-16
+ orr ip, r6 @ mask in offset bits 31-24
strh ip, [r7, #2]
-4: cmp r4, r5
+2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 2b
+ bcc 1b
bx lr
#else
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT_16BIT
- and r0, r6, #255 @ offset bits 23-16
- mov r6, r6, lsr #8 @ offset bits 31-24
-#else
- mov r0, #0 @ just in case...
-#endif
- b 3f
-2: ldr ip, [r7, r3]
+ b 2f
+1: ldr ip, [r7, r3]
bic ip, ip, #0x000000ff
- tst ip, #0x400 @ rotate shift tells us LS or MS byte
- orrne ip, ip, r6 @ mask in offset bits 31-24
- orreq ip, ip, r0 @ mask in offset bits 23-16
+ orr ip, ip, r6 @ mask in offset bits 31-24
str ip, [r7, r3]
-3: cmp r4, r5
+2: cmp r4, r5
ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 2b
+ bcc 1b
mov pc, lr
#endif
ENDPROC(__fixup_a_pv_table)
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a927ca1..814a52a9 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -45,7 +45,6 @@
/* Number of BRP/WRP registers on this CPU. */
static int core_num_brps;
-static int core_num_reserved_brps;
static int core_num_wrps;
/* Debug architecture version. */
@@ -137,10 +136,11 @@
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
- "CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n"))
+ if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
+ pr_warning("CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n");
return ARM_DEBUG_ARCH_V6;
+ }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -154,10 +154,21 @@
static int debug_arch_supported(void)
{
u8 arch = get_debug_arch();
- return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+
+ /* We don't support the memory-mapped interface. */
+ return (arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14) ||
+ arch >= ARM_DEBUG_ARCH_V7_1;
}
-/* Determine number of BRP register available. */
+/* Determine number of WRP registers available. */
+static int get_num_wrp_resources(void)
+{
+ u32 didr;
+ ARM_DBG_READ(c0, 0, didr);
+ return ((didr >> 28) & 0xf) + 1;
+}
+
+/* Determine number of BRP registers available. */
static int get_num_brp_resources(void)
{
u32 didr;
@@ -176,9 +187,10 @@
static int get_num_wrps(void)
{
/*
- * FIXME: When a watchpoint fires, the only way to work out which
- * watchpoint it was is by disassembling the faulting instruction
- * and working out the address of the memory access.
+ * On debug architectures prior to 7.1, when a watchpoint fires, the
+ * only way to work out which watchpoint it was is by disassembling
+ * the faulting instruction and working out the address of the memory
+ * access.
*
* Furthermore, we can only do this if the watchpoint was precise
* since imprecise watchpoints prevent us from calculating register
@@ -192,36 +204,17 @@
* [the ARM ARM states that the DFAR is UNKNOWN, but experience shows
* that it is set on some implementations].
*/
+ if (get_debug_arch() < ARM_DEBUG_ARCH_V7_1)
+ return 1;
-#if 0
- int wrps;
- u32 didr;
- ARM_DBG_READ(c0, 0, didr);
- wrps = ((didr >> 28) & 0xf) + 1;
-#endif
- int wrps = 1;
-
- if (core_has_mismatch_brps() && wrps >= get_num_brp_resources())
- wrps = get_num_brp_resources() - 1;
-
- return wrps;
-}
-
-/* We reserve one breakpoint for each watchpoint. */
-static int get_num_reserved_brps(void)
-{
- if (core_has_mismatch_brps())
- return get_num_wrps();
- return 0;
+ return get_num_wrp_resources();
}
/* Determine number of usable BRPs available. */
static int get_num_brps(void)
{
int brps = get_num_brp_resources();
- if (core_has_mismatch_brps())
- brps -= get_num_reserved_brps();
- return brps;
+ return core_has_mismatch_brps() ? brps - 1 : brps;
}
/*
@@ -239,7 +232,7 @@
/* Ensure that halting mode is disabled. */
if (WARN_ONCE(dscr & ARM_DSCR_HDBGEN,
- "halting debug mode enabled. Unable to access hardware resources.\n")) {
+ "halting debug mode enabled. Unable to access hardware resources.\n")) {
ret = -EPERM;
goto out;
}
@@ -255,6 +248,7 @@
ARM_DBG_WRITE(c1, 0, (dscr | ARM_DSCR_MDBGEN));
break;
case ARM_DEBUG_ARCH_V7_ECP14:
+ case ARM_DEBUG_ARCH_V7_1:
ARM_DBG_WRITE(c2, 2, (dscr | ARM_DSCR_MDBGEN));
break;
default:
@@ -346,24 +340,10 @@
val_base = ARM_BASE_BVR;
slots = (struct perf_event **)__get_cpu_var(bp_on_reg);
max_slots = core_num_brps;
- if (info->step_ctrl.enabled) {
- /* Override the breakpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- }
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled) {
- /* Install into the reserved breakpoint region. */
- ctrl_base = ARM_BASE_BCR + core_num_brps;
- val_base = ARM_BASE_BVR + core_num_brps;
- /* Override the watchpoint data with the step data. */
- addr = info->trigger & ~0x3;
- ctrl = encode_ctrl_reg(info->step_ctrl);
- } else {
- ctrl_base = ARM_BASE_WCR;
- val_base = ARM_BASE_WVR;
- }
+ ctrl_base = ARM_BASE_WCR;
+ val_base = ARM_BASE_WVR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -382,6 +362,17 @@
goto out;
}
+ /* Override the breakpoint data with the step data. */
+ if (info->step_ctrl.enabled) {
+ addr = info->trigger & ~0x3;
+ ctrl = encode_ctrl_reg(info->step_ctrl);
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE) {
+ i = 0;
+ ctrl_base = ARM_BASE_BCR + core_num_brps;
+ val_base = ARM_BASE_BVR + core_num_brps;
+ }
+ }
+
/* Setup the address register. */
write_wb_reg(val_base + i, addr);
@@ -405,10 +396,7 @@
max_slots = core_num_brps;
} else {
/* Watchpoint */
- if (info->step_ctrl.enabled)
- base = ARM_BASE_BCR + core_num_brps;
- else
- base = ARM_BASE_WCR;
+ base = ARM_BASE_WCR;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
max_slots = core_num_wrps;
}
@@ -426,6 +414,13 @@
if (WARN_ONCE(i == max_slots, "Can't find any breakpoint slot\n"))
return;
+ /* Ensure that we disable the mismatch breakpoint. */
+ if (info->ctrl.type != ARM_BREAKPOINT_EXECUTE &&
+ info->step_ctrl.enabled) {
+ i = 0;
+ base = ARM_BASE_BCR + core_num_brps;
+ }
+
/* Reset the control register. */
write_wb_reg(base + i, 0);
}
@@ -632,10 +627,9 @@
* we can use the mismatch feature as a poor-man's hardware
* single-step, but this only works for per-task breakpoints.
*/
- if (WARN_ONCE(!bp->overflow_handler &&
- (arch_check_bp_in_kernelspace(bp) || !core_has_mismatch_brps()
- || !bp->hw.bp_target),
- "overflow handler required but none found\n")) {
+ if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) ||
+ !core_has_mismatch_brps() || !bp->hw.bp_target)) {
+ pr_warning("overflow handler required but none found\n");
ret = -EINVAL;
}
out:
@@ -666,34 +660,62 @@
arch_install_hw_breakpoint(bp);
}
-static void watchpoint_handler(unsigned long unknown, struct pt_regs *regs)
+static void watchpoint_handler(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs)
{
- int i;
+ int i, access;
+ u32 val, ctrl_reg, alignment_mask;
struct perf_event *wp, **slots;
struct arch_hw_breakpoint *info;
+ struct arch_hw_breakpoint_ctrl ctrl;
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- /* Without a disassembler, we can only handle 1 watchpoint. */
- BUG_ON(core_num_wrps > 1);
-
for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
- if (wp == NULL) {
- rcu_read_unlock();
- continue;
+ if (wp == NULL)
+ goto unlock;
+
+ info = counter_arch_bp(wp);
+ /*
+ * The DFAR is an unknown value on debug architectures prior
+ * to 7.1. Since we only allow a single watchpoint on these
+ * older CPUs, we can set the trigger to the lowest possible
+ * faulting address.
+ */
+ if (debug_arch < ARM_DEBUG_ARCH_V7_1) {
+ BUG_ON(i > 0);
+ info->trigger = wp->attr.bp_addr;
+ } else {
+ if (info->ctrl.len == ARM_BREAKPOINT_LEN_8)
+ alignment_mask = 0x7;
+ else
+ alignment_mask = 0x3;
+
+ /* Check if the watchpoint value matches. */
+ val = read_wb_reg(ARM_BASE_WVR + i);
+ if (val != (addr & ~alignment_mask))
+ goto unlock;
+
+ /* Possible match, check the byte address select. */
+ ctrl_reg = read_wb_reg(ARM_BASE_WCR + i);
+ decode_ctrl_reg(ctrl_reg, &ctrl);
+ if (!((1 << (addr & alignment_mask)) & ctrl.len))
+ goto unlock;
+
+ /* Check that the access type matches. */
+ access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W :
+ HW_BREAKPOINT_R;
+ if (!(access & hw_breakpoint_type(wp)))
+ goto unlock;
+
+ /* We have a winner. */
+ info->trigger = addr;
}
- /*
- * The DFAR is an unknown value. Since we only allow a
- * single watchpoint, we can set the trigger to the lowest
- * possible faulting address.
- */
- info = counter_arch_bp(wp);
- info->trigger = wp->attr.bp_addr;
pr_debug("watchpoint fired: address = 0x%x\n", info->trigger);
perf_bp_event(wp, regs);
@@ -705,6 +727,7 @@
if (!wp->overflow_handler)
enable_single_step(wp, instruction_pointer(regs));
+unlock:
rcu_read_unlock();
}
}
@@ -717,7 +740,7 @@
slots = (struct perf_event **)__get_cpu_var(wp_on_reg);
- for (i = 0; i < core_num_reserved_brps; ++i) {
+ for (i = 0; i < core_num_wrps; ++i) {
rcu_read_lock();
wp = slots[i];
@@ -820,7 +843,7 @@
case ARM_ENTRY_ASYNC_WATCHPOINT:
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
case ARM_ENTRY_SYNC_WATCHPOINT:
- watchpoint_handler(addr, regs);
+ watchpoint_handler(addr, fsr, regs);
break;
default:
ret = 1; /* Unhandled fault. */
@@ -834,11 +857,31 @@
/*
* One-time initialisation.
*/
-static void reset_ctrl_regs(void *info)
+static cpumask_t debug_err_mask;
+
+static int debug_reg_trap(struct pt_regs *regs, unsigned int instr)
{
- int i, cpu = smp_processor_id();
+ int cpu = smp_processor_id();
+
+ pr_warning("Debug register access (0x%x) caused undefined instruction on CPU %d\n",
+ instr, cpu);
+
+ /* Set the error flag for this CPU and skip the faulting instruction. */
+ cpumask_set_cpu(cpu, &debug_err_mask);
+ instruction_pointer(regs) += 4;
+ return 0;
+}
+
+static struct undef_hook debug_reg_hook = {
+ .instr_mask = 0x0fe80f10,
+ .instr_val = 0x0e000e10,
+ .fn = debug_reg_trap,
+};
+
+static void reset_ctrl_regs(void *unused)
+{
+ int i, raw_num_brps, err = 0, cpu = smp_processor_id();
u32 dbg_power;
- cpumask_t *cpumask = info;
/*
* v7 debug contains save and restore registers so that debug state
@@ -848,38 +891,57 @@
* Access Register to avoid taking undefined instruction exceptions
* later on.
*/
- if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
+ switch (debug_arch) {
+ case ARM_DEBUG_ARCH_V6:
+ case ARM_DEBUG_ARCH_V6_1:
+ /* ARMv6 cores just need to reset the registers. */
+ goto reset_regs;
+ case ARM_DEBUG_ARCH_V7_ECP14:
/*
* Ensure sticky power-down is clear (i.e. debug logic is
* powered up).
*/
asm volatile("mrc p14, 0, %0, c1, c5, 4" : "=r" (dbg_power));
- if ((dbg_power & 0x1) == 0) {
- pr_warning("CPU %d debug is powered down!\n", cpu);
- cpumask_or(cpumask, cpumask, cpumask_of(cpu));
- return;
- }
-
+ if ((dbg_power & 0x1) == 0)
+ err = -EPERM;
+ break;
+ case ARM_DEBUG_ARCH_V7_1:
/*
- * Unconditionally clear the lock by writing a value
- * other than 0xC5ACCE55 to the access register.
+ * Ensure the OS double lock is clear.
*/
- asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
- isb();
-
- /*
- * Clear any configured vector-catch events before
- * enabling monitor mode.
- */
- asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
- isb();
+ asm volatile("mrc p14, 0, %0, c1, c3, 4" : "=r" (dbg_power));
+ if ((dbg_power & 0x1) == 1)
+ err = -EPERM;
+ break;
}
+ if (err) {
+ pr_warning("CPU %d debug is powered down!\n", cpu);
+ cpumask_or(&debug_err_mask, &debug_err_mask, cpumask_of(cpu));
+ return;
+ }
+
+ /*
+ * Unconditionally clear the lock by writing a value
+ * other than 0xC5ACCE55 to the access register.
+ */
+ asm volatile("mcr p14, 0, %0, c1, c0, 4" : : "r" (0));
+ isb();
+
+ /*
+ * Clear any configured vector-catch events before
+ * enabling monitor mode.
+ */
+ asm volatile("mcr p14, 0, %0, c0, c7, 0" : : "r" (0));
+ isb();
+
+reset_regs:
if (enable_monitor_mode())
return;
/* We must also reset any reserved registers. */
- for (i = 0; i < core_num_brps + core_num_reserved_brps; ++i) {
+ raw_num_brps = get_num_brp_resources();
+ for (i = 0; i < raw_num_brps; ++i) {
write_wb_reg(ARM_BASE_BCR + i, 0UL);
write_wb_reg(ARM_BASE_BVR + i, 0UL);
}
@@ -895,6 +957,7 @@
{
if (action == CPU_ONLINE)
smp_call_function_single((int)cpu, reset_ctrl_regs, NULL, 1);
+
return NOTIFY_OK;
}
@@ -905,7 +968,6 @@
static int __init arch_hw_breakpoint_init(void)
{
u32 dscr;
- cpumask_t cpumask = { CPU_BITS_NONE };
debug_arch = get_debug_arch();
@@ -916,28 +978,31 @@
/* Determine how many BRPs/WRPs are available. */
core_num_brps = get_num_brps();
- core_num_reserved_brps = get_num_reserved_brps();
core_num_wrps = get_num_wrps();
- pr_info("found %d breakpoint and %d watchpoint registers.\n",
- core_num_brps + core_num_reserved_brps, core_num_wrps);
-
- if (core_num_reserved_brps)
- pr_info("%d breakpoint(s) reserved for watchpoint "
- "single-step.\n", core_num_reserved_brps);
+ /*
+ * We need to tread carefully here because DBGSWENABLE may be
+ * driven low on this core and there isn't an architected way to
+ * determine that.
+ */
+ register_undef_hook(&debug_reg_hook);
/*
* Reset the breakpoint resources. We assume that a halting
* debugger will leave the world in a nice state for us.
*/
- on_each_cpu(reset_ctrl_regs, &cpumask, 1);
- if (!cpumask_empty(&cpumask)) {
+ on_each_cpu(reset_ctrl_regs, NULL, 1);
+ unregister_undef_hook(&debug_reg_hook);
+ if (!cpumask_empty(&debug_err_mask)) {
core_num_brps = 0;
- core_num_reserved_brps = 0;
core_num_wrps = 0;
return 0;
}
+ pr_info("found %d " "%s" "breakpoint and %d watchpoint registers.\n",
+ core_num_brps, core_has_mismatch_brps() ? "(+1 reserved) " :
+ "", core_num_wrps);
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
max_watchpoint_len = 4;
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index de3dcab8..7cb2926 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -35,8 +35,8 @@
#include <linux/list.h>
#include <linux/kallsyms.h>
#include <linux/proc_fs.h>
-#include <linux/ftrace.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
@@ -59,9 +59,6 @@
#ifdef CONFIG_SMP
show_ipi_list(p, prec);
#endif
-#ifdef CONFIG_LOCAL_TIMERS
- show_local_irqs(p, prec);
-#endif
seq_printf(p, "%*s: %10lu\n", prec, "Err", irq_err_count);
return 0;
}
diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c
index 79203ee..9fe8910 100644
--- a/arch/arm/kernel/kprobes-arm.c
+++ b/arch/arm/kernel/kprobes-arm.c
@@ -60,6 +60,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -971,6 +972,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_arm_table);
+#endif
static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs)
{
diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c
new file mode 100644
index 0000000..fc82de8
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-arm.c
@@ -0,0 +1,1323 @@
+/*
+ * arch/arm/kernel/kprobes-test-arm.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "32"
+
+#define TEST_ARM_TO_THUMB_INTERWORK_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+#define TEST_ARM_TO_THUMB_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f) \
+ TEST_ARG_MEM(15, 3f+1) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "3: adr lr, 2f \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_arm_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Data-processing (register), (register-shifted register), (immediate)")
+
+#define _DATA_PROCESSING_DNM(op,s,val) \
+ TEST_RR( op "eq" s " r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "ne" s " r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cs" s " r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cc" s " r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "mi" s " r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "pl" s " r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vs" s " r6, r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", pc, lsl #3") \
+ TEST_R( op "vc" s " r6, r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vc" s " r6, pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vc" s " r6, sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "hi" s " r8, r",9, VAL1,", r",14,val, ", lsl r",0, 3,"")\
+ TEST_RRR( op "ls" s " r9, r",9, VAL1,", r",14,val, ", lsr r",7, 4,"")\
+ TEST_RRR( op "ge" s " r10, r",11,VAL1,", r",14,val, ", asr r",7, 5,"")\
+ TEST_RRR( op "lt" s " r11, r",11,VAL1,", r",14,N(val),", asr r",7, 6,"")\
+ TEST_RR( op "gt" s " r12, r13" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op "le" s " r14, r",0, val, ", r13" ", lsl r",14,8,"")\
+ TEST_RR( op s " r12, pc" ", r",14,val, ", ror r",14,7,"")\
+ TEST_RR( op s " r14, r",0, val, ", pc" ", lsl r",14,8,"")\
+ TEST_R( op "eq" s " r0, r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne" s " r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s " r7, r",8, VAL2,", #0x000af000") \
+ TEST( op s " r4, pc" ", #0x00005a00")
+
+#define DATA_PROCESSING_DNM(op,val) \
+ _DATA_PROCESSING_DNM(op,"",val) \
+ _DATA_PROCESSING_DNM(op,"s",val)
+
+#define DATA_PROCESSING_NM(op,val) \
+ TEST_RR( op "ne r",1, VAL1,", r",2, val, "") \
+ TEST_RR( op "eq r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR( op "cc r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR( op "cs r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR( op "pl r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR( op "mi r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR( op "vc r",7, VAL1,", r",2, val, ", rrx") \
+ TEST_R ( op "vs r",7, VAL1,", pc, lsl #3") \
+ TEST_R ( op "vs r",7, VAL1,", sp, lsr #4") \
+ TEST_R( op "vs pc, r",7, VAL1,", asr #5") \
+ TEST_R( op "vs sp, r",7, VAL1,", ror #6") \
+ TEST_RRR( op "ls r",9, VAL1,", r",14,val, ", lsl r",0, 3,"") \
+ TEST_RRR( op "hi r",9, VAL1,", r",14,val, ", lsr r",7, 4,"") \
+ TEST_RRR( op "lt r",11,VAL1,", r",14,val, ", asr r",7, 5,"") \
+ TEST_RRR( op "ge r",11,VAL1,", r",14,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "le r13" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op "gt r",0, val, ", r13" ", lsl r",14,8,"") \
+ TEST_RR( op " pc" ", r",14,val, ", ror r",14,7,"") \
+ TEST_RR( op " r",0, val, ", pc" ", lsl r",14,8,"") \
+ TEST_R( op "eq r",11,VAL1,", #0xf5") \
+ TEST_R( op "ne r",0, VAL1,", #0xf5000000") \
+ TEST_R( op " r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING_DM(op,s,val) \
+ TEST_R( op "eq" s " r0, r",1, val, "") \
+ TEST_R( op "ne" s " r1, r",1, val, ", lsl #3") \
+ TEST_R( op "cs" s " r2, r",3, val, ", lsr #4") \
+ TEST_R( op "cc" s " r3, r",3, val, ", asr #5") \
+ TEST_R( op "mi" s " r4, r",5, N(val),", asr #6") \
+ TEST_R( op "pl" s " r5, r",5, val, ", ror #7") \
+ TEST_R( op "vs" s " r6, r",10,val, ", rrx") \
+ TEST( op "vs" s " r7, pc, lsl #3") \
+ TEST( op "vs" s " r7, sp, lsr #4") \
+ TEST_RR( op "vc" s " r8, r",7, val, ", lsl r",0, 3,"") \
+ TEST_RR( op "hi" s " r9, r",9, val, ", lsr r",7, 4,"") \
+ TEST_RR( op "ls" s " r10, r",9, val, ", asr r",7, 5,"") \
+ TEST_RR( op "ge" s " r11, r",11,N(val),", asr r",7, 6,"") \
+ TEST_RR( op "lt" s " r12, r",11,val, ", ror r",14,7,"") \
+ TEST_R( op "gt" s " r14, r13" ", lsl r",14,8,"") \
+ TEST_R( op "le" s " r14, pc" ", lsl r",14,8,"") \
+ TEST( op "eq" s " r0, #0xf5") \
+ TEST( op "ne" s " r11, #0xf5000000") \
+ TEST( op s " r7, #0x000af000") \
+ TEST( op s " r4, #0x00005a00")
+
+#define DATA_PROCESSING_DM(op,val) \
+ _DATA_PROCESSING_DM(op,"",val) \
+ _DATA_PROCESSING_DM(op,"s",val)
+
+ DATA_PROCESSING_DNM("and",0xf00f00ff)
+ DATA_PROCESSING_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING_DNM("sub",VAL2)
+ DATA_PROCESSING_DNM("rsb",VAL2)
+ DATA_PROCESSING_DNM("add",VAL2)
+ DATA_PROCESSING_DNM("adc",VAL2)
+ DATA_PROCESSING_DNM("sbc",VAL2)
+ DATA_PROCESSING_DNM("rsc",VAL2)
+ DATA_PROCESSING_NM("tst",0xf00f00ff)
+ DATA_PROCESSING_NM("teq",0xf00f00ff)
+ DATA_PROCESSING_NM("cmp",VAL2)
+ DATA_PROCESSING_NM("cmn",VAL2)
+ DATA_PROCESSING_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING_DM("mov",VAL2)
+ DATA_PROCESSING_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING_DM("mvn",VAL2)
+
+ TEST("mov ip, sp") /* This has special case emulation code */
+
+ TEST_SUPPORTED("mov pc, #0x1000");
+ TEST_SUPPORTED("mov sp, #0x1000");
+ TEST_SUPPORTED("cmp pc, #0x1000");
+ TEST_SUPPORTED("cmp sp, #0x1000");
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED(".word 0xe15c0f1e @ cmp r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe1a0cf1e @ mov r12, r14, asl pc")
+ TEST_UNSUPPORTED(".word 0xe08caf1e @ add r10, r12, r14, asl pc")
+
+ /* Data-processing with PC as shift*/
+ TEST_UNSUPPORTED("movs pc, r1")
+ TEST_UNSUPPORTED("movs pc, r1, lsl r2")
+ TEST_UNSUPPORTED("movs pc, #0x10000")
+ TEST_UNSUPPORTED("adds pc, lr, r1")
+ TEST_UNSUPPORTED("adds pc, lr, r1, lsl r2")
+ TEST_UNSUPPORTED("adds pc, lr, #4")
+
+ /* Data-processing with SP as target */
+ TEST("add sp, sp, #16")
+ TEST("sub sp, sp, #8")
+ TEST("bic sp, sp, #0x20")
+ TEST("orr sp, sp, #0x20")
+ TEST_PR( "add sp, r",10,0,", r",11,4,"")
+ TEST_PRR("add sp, r",10,0,", r",11,4,", asl r",12,1,"")
+ TEST_P( "mov sp, r",10,0,"")
+ TEST_PR( "mov sp, r",10,0,", asl r",12,0,"")
+
+ /* Data-processing with PC as target */
+ TEST_BF( "add pc, pc, #2f-1b-8")
+ TEST_BF_R ("add pc, pc, r",14,2f-1f-8,"")
+ TEST_BF_R ("add pc, r",14,2f-1f-8,", pc")
+ TEST_BF_R ("mov pc, r",0,2f,"")
+ TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"")
+ TEST_BB( "sub pc, pc, #1b-2b+8")
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */
+#endif
+ TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"")
+ TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc")
+ TEST_RR( "add pc, pc, r",10,-2,", asl r",11,1,"")
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_R("add pc, pc, r",0,3f-1f-8+1,"")
+ TEST_ARM_TO_THUMB_INTERWORK_R("sub pc, r",0,3f+8+1,", #8")
+#endif
+ TEST_GROUP("Miscellaneous instructions")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrspl r7, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".word 0xe10ff000 @ mrs r15, cpsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, lr")
+ TEST_UNSUPPORTED("msr spsr, r0")
+
+ TEST_BF_R("bx r",0,2f,"")
+ TEST_BB_R("bx r",7,2f,"")
+ TEST_BF_R("bxeq r",14,2f,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clzeq r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+ TEST( "clz r4, sp")
+ TEST_UNSUPPORTED(".word 0x016fff10 @ clz pc, r0")
+ TEST_UNSUPPORTED(".word 0x016f0f1f @ clz r0, pc")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("bxj r0")
+#endif
+
+ TEST_BF_R("blx r",0,2f,"")
+ TEST_BB_R("blx r",7,2f,"")
+ TEST_BF_R("blxeq r",14,2f,"")
+ TEST_UNSUPPORTED(".word 0x0120003f @ blx pc")
+
+ TEST_RR( "qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qsub lr, r",9, VAL2,", r13")
+ TEST_RR( "qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdaddvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdadd lr, r",9, VAL2,", r13")
+ TEST_RR( "qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "qdsubvs lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_R( "qdsub lr, r",9, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe101f050 @ qadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe121f050 @ qsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe141f050 @ qdadd pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe161f050 @ qdsub pc, r0, r1")
+ TEST_UNSUPPORTED(".word 0xe16f2050 @ qdsub r2, r0, pc")
+ TEST_UNSUPPORTED(".word 0xe161205f @ qdsub r2, pc, r1")
+
+ TEST_UNSUPPORTED("bkpt 0xffff")
+ TEST_UNSUPPORTED("bkpt 0x0000")
+
+ TEST_UNSUPPORTED(".word 0xe1600070 @ smc #0")
+
+ TEST_GROUP("Halfword multiply and multiply-accumulate")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f3281 @ smlabb pc, r1, r2, r3")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32a1 @ smlatb pc, r1, r2, r3")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlabt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32c1 @ smlabt pc, r1, r2, r3")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlattge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlatt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe10f32e1 @ smlatt pc, r1, r2, r3")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawbge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawb lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f3281 @ smlawb pc, r1, r2, r3")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawtge r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smlawt lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f32c1 @ smlawt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe12032cf @ smlawt r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe1203fc1 @ smlawt r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe120f2c1 @ smlawt r0, r1, r2, pc")
+
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02a1 @ smulwb pc, r1, r2")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulwt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe12f02e1 @ smulwt pc, r1, r2")
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f1382 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f382 @ smlalbb r1, pc, r2, r3")
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltble r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltb r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13a2 @ smlaltb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3a2 @ smlaltb r1, pc, r2, r3")
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbtle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlalbt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13c2 @ smlalbt pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe141f3c2 @ smlalbt r1, pc, r2, r3")
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalttle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlaltt r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe14f13e2 @ smlalbb pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe140f3e2 @ smlalbb r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe14013ef @ smlalbb r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe1401fe2 @ smlalbb r0, r1, r2, pc")
+
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f0281 @ smulbb pc, r1, r2")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultbge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultb lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02a1 @ smultb pc, r1, r2")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbtge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smulbt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02c1 @ smultb pc, r1, r2")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulttge r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_R( "smultt lr, r",1, VAL2,", r13")
+ TEST_UNSUPPORTED(".word 0xe16f02e1 @ smultt pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe16002ef @ smultt r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe1600fe1 @ smultt r0, r1, pc")
+
+ TEST_GROUP("Multiply and multiply-accumulate")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mulls r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "mul lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe00f0291 @ mul pc, r1, r2")
+ TEST_UNSUPPORTED(".word 0xe000029f @ mul r0, pc, r2")
+ TEST_UNSUPPORTED(".word 0xe0000f91 @ mul r0, r1, pc")
+ TEST_RR( "muls r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mullss r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_R( "muls lr, r",4, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe01f0291 @ muls pc, r1, r2")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mla lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe02f3291 @ mla pc, r1, r2, r3")
+ TEST_RRR( "mlas r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlahis r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mlas lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe03f3291 @ mlas pc, r1, r2, r3")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_RR( "umaal r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umaalls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umaal lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe041f392 @ umaal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe04f0392 @ umaal r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0500090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe05fff9f @ undef")
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mlshi r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "mls lr, r",1, VAL2,", r",2, VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe06f3291 @ mls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe060329f @ mls r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0603f91 @ mls r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe060f291 @ mls r0, r1, r2, pc")
+#endif
+
+ TEST_UNSUPPORTED(".word 0xe0700090 @ undef")
+ TEST_UNSUPPORTED(".word 0xe07fff9f @ undef")
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe081f392 @ umull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe08f1392 @ umull r1, pc, r2, r3")
+ TEST_RR( "umulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "umulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe091f392 @ umulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe09f1392 @ umulls r1, pc, r2, r3")
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0af1392 @ umlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0a1f392 @ umlal r1, pc, r2, r3")
+ TEST_RRRR( "umlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "umlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0bf1392 @ umlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0b1f392 @ umlals r1, pc, r2, r3")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smullls r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smull lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0c1f392 @ smull pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0cf1392 @ smull r1, pc, r2, r3")
+ TEST_RR( "smulls r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smulllss r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_R( "smulls lr, r12, r",11,VAL3,", r13")
+ TEST_UNSUPPORTED(".word 0xe0d1f392 @ smulls pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0df1392 @ smulls r1, pc, r2, r3")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalle r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlal r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ef1392 @ smlal pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0e1f392 @ smlal r1, pc, r2, r3")
+ TEST_RRRR( "smlals r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalles r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRR( "smlals r",14,VAL3,", r",7, VAL4,", r",5, VAL1,", r13")
+ TEST_UNSUPPORTED(".word 0xe0ff1392 @ smlals pc, r1, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0f392 @ smlals r0, pc, r2, r3")
+ TEST_UNSUPPORTED(".word 0xe0f0139f @ smlals r0, r1, pc, r3")
+ TEST_UNSUPPORTED(".word 0xe0f01f92 @ smlals r0, r1, r2, pc")
+
+ TEST_GROUP("Synchronization primitives")
+
+ /*
+ * Use hard coded constants for SWP instructions to avoid warnings
+ * about deprecated instructions.
+ */
+ TEST_RP( ".word 0xe108e097 @ swp lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x610d0091 @ swpvs r0, r",1,VAL1,", [sp]")
+ TEST_RP( ".word 0xe10cd09e @ swp sp, r",14,VAL2,", [r",12,13*4,"]")
+ TEST_UNSUPPORTED(".word 0xe102f091 @ swp pc, r1, [r2]")
+ TEST_UNSUPPORTED(".word 0xe102009f @ swp r0, pc, [r2]")
+ TEST_UNSUPPORTED(".word 0xe10f0091 @ swp r0, r1, [pc]")
+ TEST_RP( ".word 0xe148e097 @ swpb lr, r",7,VAL2,", [r",8,0,"]")
+ TEST_R( ".word 0x614d0091 @ swpvsb r0, r",1,VAL1,", [sp]")
+ TEST_UNSUPPORTED(".word 0xe142f091 @ swpb pc, r1, [r2]")
+
+ TEST_UNSUPPORTED(".word 0xe1100090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1200090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1300090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1500090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1600090") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe1700090") /* Unallocated space */
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("ldrex r2, [sp]")
+ TEST_UNSUPPORTED("strexd r0, r2, r3, [sp]")
+ TEST_UNSUPPORTED("ldrexd r2, r3, [sp]")
+ TEST_UNSUPPORTED("strexb r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexb r2, [sp]")
+ TEST_UNSUPPORTED("strexh r0, r2, [sp]")
+ TEST_UNSUPPORTED("ldrexh r2, [sp]")
+#endif
+ TEST_GROUP("Extra load/store instructions")
+
+ TEST_RPR( "strh r",0, VAL1,", [r",1, 48,", -r",2, 24,"]")
+ TEST_RPR( "streqh r",14,VAL2,", [r",13,0, ", r",12, 48,"]")
+ TEST_RPR( "strh r",1, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strneh r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strh r",2, VAL1,", [r",3, 24,"], r",4, 48,"")
+ TEST_RPR( "strh r",10,VAL2,", [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0ba @ strh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0bb @ strh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089a0bf @ strh r10, [r9], pc")
+
+ TEST_PR( "ldrh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrcsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrcch r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0ba @ ldrh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0bb @ ldrh pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe099a0bf @ ldrh r10, [r9], pc")
+
+ TEST_RP( "strh r",0, VAL1,", [r",1, 24,", #-2]")
+ TEST_RP( "strmih r",14,VAL2,", [r",13,0, ", #2]")
+ TEST_RP( "strh r",1, VAL1,", [r",2, 24,", #4]!")
+ TEST_RP( "strplh r",12,VAL2,", [r",11,24,", #-4]!")
+ TEST_RP( "strh r",2, VAL1,", [r",3, 24,"], #48")
+ TEST_RP( "strh r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3b0 @ strh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3b0 @ strh pc, [r9], #48")
+
+ TEST_P( "ldrh r0, [r",0, 24,", #-2]")
+ TEST_P( "ldrvsh r14, [r",13,0, ", #2]")
+ TEST_P( "ldrh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrvch r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrh r10, [r",9, 64,"], #-48")
+ TEST( "ldrh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3b0 @ ldrh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3b0 @ ldrh pc, [r9], #48")
+
+ TEST_PR( "ldrsb r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrhisb r14, [r",13,0,", r",12, 48,"]")
+ TEST_PR( "ldrsb r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlssb r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsb r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsb r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0da @ ldrsb r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0db @ ldrsb pc, [r9], r11")
+
+ TEST_P( "ldrsb r0, [r",0, 24,", #-1]")
+ TEST_P( "ldrgesb r14, [r",13,0, ", #1]")
+ TEST_P( "ldrsb r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrltsb r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsb r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsb r10, [r",9, 64,"], #-48")
+ TEST( "ldrsb r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3d0 @ ldrsb r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3d0 @ ldrsb pc, [r9], #48")
+
+ TEST_PR( "ldrsh r0, [r",0, 48,", -r",2, 24,"]")
+ TEST_PR( "ldrgtsh r14, [r",13,0, ", r",12, 48,"]")
+ TEST_PR( "ldrsh r1, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrlesh r12, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrsh r2, [r",3, 24,"], r",4, 48,"")
+ TEST_PR( "ldrsh r10, [r",9, 48,"], -r",11,24,"")
+ TEST_UNSUPPORTED(".word 0xe1bfc0fa @ ldrsh r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe099f0fb @ ldrsh pc, [r9], r11")
+
+ TEST_P( "ldrsh r0, [r",0, 24,", #-1]")
+ TEST_P( "ldreqsh r14, [r",13,0 ,", #1]")
+ TEST_P( "ldrsh r1, [r",2, 24,", #4]!")
+ TEST_P( "ldrnesh r12, [r",11,24,", #-4]!")
+ TEST_P( "ldrsh r2, [r",3, 24,"], #48")
+ TEST_P( "ldrsh r10, [r",9, 64,"], #-48")
+ TEST( "ldrsh r0, [pc, #0]")
+ TEST_UNSUPPORTED(".word 0xe1ffc3f0 @ ldrsh r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0d9f3f0 @ ldrsh pc, [r9], #48")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("strht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrht r1, [r2], r3")
+ TEST_UNSUPPORTED("strht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrht r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsbt r1, [r2], #48")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], r3")
+ TEST_UNSUPPORTED("ldrsht r1, [r2], #48")
+#endif
+
+ TEST_RPR( "strd r",0, VAL1,", [r",1, 48,", -r",2,24,"]")
+ TEST_RPR( "strccd r",8, VAL2,", [r",13,0, ", r",12,48,"]")
+ TEST_RPR( "strd r",4, VAL1,", [r",2, 24,", r",3, 48,"]!")
+ TEST_RPR( "strcsd r",12,VAL2,", [r",11,48,", -r",10,24,"]!")
+ TEST_RPR( "strd r",2, VAL1,", [r",3, 24,"], r",4,48,"")
+ TEST_RPR( "strd r",10,VAL2,", [r",9, 48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0fa @ strd r12, [pc, r10]!")
+
+ TEST_PR( "ldrd r0, [r",0, 48,", -r",2,24,"]")
+ TEST_PR( "ldrmid r8, [r",13,0, ", r",12,48,"]")
+ TEST_PR( "ldrd r4, [r",2, 24,", r",3, 48,"]!")
+ TEST_PR( "ldrpld r6, [r",11,48,", -r",10,24,"]!")
+ TEST_PR( "ldrd r2, [r",5, 24,"], r",4,48,"")
+ TEST_PR( "ldrd r10, [r",9,48,"], -r",7,24,"")
+ TEST_UNSUPPORTED(".word 0xe1afc0da @ ldrd r12, [pc, r10]!")
+ TEST_UNSUPPORTED(".word 0xe089f0db @ ldrd pc, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089e0db @ ldrd lr, [r9], r11")
+ TEST_UNSUPPORTED(".word 0xe089c0df @ ldrd r12, [r9], pc")
+
+ TEST_RP( "strd r",0, VAL1,", [r",1, 24,", #-8]")
+ TEST_RP( "strvsd r",8, VAL2,", [r",13,0, ", #8]")
+ TEST_RP( "strd r",4, VAL1,", [r",2, 24,", #16]!")
+ TEST_RP( "strvcd r",12,VAL2,", [r",11,24,", #-16]!")
+ TEST_RP( "strd r",2, VAL1,", [r",4, 24,"], #48")
+ TEST_RP( "strd r",10,VAL2,", [r",9, 64,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3f0 @ strd r12, [pc, #48]!")
+
+ TEST_P( "ldrd r0, [r",0, 24,", #-8]")
+ TEST_P( "ldrhid r8, [r",13,0, ", #8]")
+ TEST_P( "ldrd r4, [r",2, 24,", #16]!")
+ TEST_P( "ldrlsd r6, [r",11,24,", #-16]!")
+ TEST_P( "ldrd r2, [r",5, 24,"], #48")
+ TEST_P( "ldrd r10, [r",9,6,"], #-48")
+ TEST_UNSUPPORTED(".word 0xe1efc3d0 @ ldrd r12, [pc, #48]!")
+ TEST_UNSUPPORTED(".word 0xe0c9f3d0 @ ldrd pc, [r9], #48")
+ TEST_UNSUPPORTED(".word 0xe0c9e3d0 @ ldrd lr, [r9], #48")
+
+ TEST_GROUP("Miscellaneous")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".word 0xe300f000 @ movw pc, #0")
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".word 0xe340f000 @ movt pc, #0")
+#endif
+
+ TEST_UNSUPPORTED("msr cpsr, 0x13")
+ TEST_UNSUPPORTED("msr cpsr_f, 0xf0000000")
+ TEST_UNSUPPORTED("msr spsr, 0x13")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED("dbg #0")
+#endif
+
+ TEST_GROUP("Load/store word and unsigned byte")
+
+#define LOAD_STORE(byte) \
+ TEST_RP( "str"byte" r",0, VAL1,", [r",1, 24,", #-2]") \
+ TEST_RP( "str"byte" r",14,VAL2,", [r",13,0, ", #2]") \
+ TEST_RP( "str"byte" r",1, VAL1,", [r",2, 24,", #4]!") \
+ TEST_RP( "str"byte" r",12,VAL2,", [r",11,24,", #-4]!") \
+ TEST_RP( "str"byte" r",2, VAL1,", [r",3, 24,"], #48") \
+ TEST_RP( "str"byte" r",10,VAL2,", [r",9, 64,"], #-48") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 48,", -r",2, 24,"]") \
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 48,"]") \
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 48,"]!") \
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,48,", -r",10,24,"]!") \
+ TEST_RPR("str"byte" r",2, VAL1,", [r",3, 24,"], r",4, 48,"") \
+ TEST_RPR("str"byte" r",10,VAL2,", [r",9, 48,"], -r",11,24,"") \
+ TEST_RPR("str"byte" r",0, VAL1,", [r",1, 24,", r",2, 32,", asl #1]")\
+ TEST_RPR("str"byte" r",14,VAL2,", [r",13,0, ", r",12, 32,", lsr #2]")\
+ TEST_RPR("str"byte" r",1, VAL1,", [r",2, 24,", r",3, 32,", asr #3]!")\
+ TEST_RPR("str"byte" r",12,VAL2,", [r",11,24,", r",10, 4,", ror #31]!")\
+ TEST_P( "ldr"byte" r0, [r",0, 24,", #-2]") \
+ TEST_P( "ldr"byte" r14, [r",13,0, ", #2]") \
+ TEST_P( "ldr"byte" r1, [r",2, 24,", #4]!") \
+ TEST_P( "ldr"byte" r12, [r",11,24,", #-4]!") \
+ TEST_P( "ldr"byte" r2, [r",3, 24,"], #48") \
+ TEST_P( "ldr"byte" r10, [r",9, 64,"], #-48") \
+ TEST_PR( "ldr"byte" r0, [r",0, 48,", -r",2, 24,"]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 48,"]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 48,"]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,48,", -r",10,24,"]!") \
+ TEST_PR( "ldr"byte" r2, [r",3, 24,"], r",4, 48,"") \
+ TEST_PR( "ldr"byte" r10, [r",9, 48,"], -r",11,24,"") \
+ TEST_PR( "ldr"byte" r0, [r",0, 24,", r",2, 32,", asl #1]") \
+ TEST_PR( "ldr"byte" r14, [r",13,0, ", r",12, 32,", lsr #2]") \
+ TEST_PR( "ldr"byte" r1, [r",2, 24,", r",3, 32,", asr #3]!") \
+ TEST_PR( "ldr"byte" r12, [r",11,24,", r",10, 4,", ror #31]!") \
+ TEST( "ldr"byte" r0, [pc, #0]") \
+ TEST_R( "ldr"byte" r12, [pc, r",14,0,"]")
+
+ LOAD_STORE("")
+ TEST_P( "str pc, [r",0,0,", #15*4]")
+ TEST_R( "str pc, [sp, r",2,15*4,"]")
+ TEST_BF( "ldr pc, [sp, #15*4]")
+ TEST_BF_R("ldr pc, [sp, r",2,15*4,"]")
+
+ TEST_P( "str sp, [r",0,0,", #13*4]")
+ TEST_R( "str sp, [sp, r",2,13*4,"]")
+ TEST_BF( "ldr sp, [sp, #13*4]")
+ TEST_BF_R("ldr sp, [sp, r",2,13*4,"]")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+#endif
+ TEST_UNSUPPORTED(".word 0xe5af6008 @ str r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7af6008 @ str r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5bf6008 @ ldr r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7bf6008 @ ldr r6, [pc, r8]!")
+ TEST_UNSUPPORTED(".word 0xe788600f @ str r6, [r8, pc]")
+ TEST_UNSUPPORTED(".word 0xe798600f @ ldr r6, [r8, pc]")
+
+ LOAD_STORE("b")
+ TEST_UNSUPPORTED(".word 0xe5f7f008 @ ldrb pc, [r7, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7f7f008 @ ldrb pc, [r7, r8]!")
+ TEST_UNSUPPORTED(".word 0xe5ef6008 @ strb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ef6008 @ strb r6, [pc, r3]!")
+ TEST_UNSUPPORTED(".word 0xe5ff6008 @ ldrb r6, [pc, #8]!")
+ TEST_UNSUPPORTED(".word 0xe7ff6008 @ ldrb r6, [pc, r3]!")
+
+ TEST_UNSUPPORTED("ldrt r0, [r1], #4")
+ TEST_UNSUPPORTED("ldrt r1, [r2], r3")
+ TEST_UNSUPPORTED("strt r2, [r3], #4")
+ TEST_UNSUPPORTED("strt r3, [r4], r5")
+ TEST_UNSUPPORTED("ldrbt r4, [r5], #4")
+ TEST_UNSUPPORTED("ldrbt r5, [r6], r7")
+ TEST_UNSUPPORTED("strbt r6, [r7], #4")
+ TEST_UNSUPPORTED("strbt r7, [r8], r9")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ TEST_UNSUPPORTED(".word 0xe6000010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe60fffff") /* Unallocated space */
+
+ TEST_RR( "sadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff1a @ sadd16 pc, r12, r10")
+ TEST_RR( "sasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff3a @ sasx pc, r12, r10")
+ TEST_RR( "ssax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff5a @ ssax pc, r12, r10")
+ TEST_RR( "ssub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff7a @ ssub16 pc, r12, r10")
+ TEST_RR( "sadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cff9a @ sadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe61000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe61fffdf") /* Unallocated space */
+ TEST_RR( "ssub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "ssub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe61cfffa @ ssub8 pc, r12, r10")
+
+ TEST_RR( "qadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff1a @ qadd16 pc, r12, r10")
+ TEST_RR( "qasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff3a @ qasx pc, r12, r10")
+ TEST_RR( "qsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff5a @ qsax pc, r12, r10")
+ TEST_RR( "qsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff7a @ qsub16 pc, r12, r10")
+ TEST_RR( "qadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cff9a @ qadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe62000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe62fffdf") /* Unallocated space */
+ TEST_RR( "qsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "qsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe62cfffa @ qsub8 pc, r12, r10")
+
+ TEST_RR( "shadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff1a @ shadd16 pc, r12, r10")
+ TEST_RR( "shasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff3a @ shasx pc, r12, r10")
+ TEST_RR( "shsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff5a @ shsax pc, r12, r10")
+ TEST_RR( "shsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff7a @ shsub16 pc, r12, r10")
+ TEST_RR( "shadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cff9a @ shadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe63000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe63fffdf") /* Unallocated space */
+ TEST_RR( "shsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "shsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe63cfffa @ shsub8 pc, r12, r10")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ TEST_UNSUPPORTED(".word 0xe6400010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe64fffff") /* Unallocated space */
+
+ TEST_RR( "uadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff1a @ uadd16 pc, r12, r10")
+ TEST_RR( "uasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff3a @ uasx pc, r12, r10")
+ TEST_RR( "usax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff5a @ usax pc, r12, r10")
+ TEST_RR( "usub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff7a @ usub16 pc, r12, r10")
+ TEST_RR( "uadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cff9a @ uadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe65000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe65fffdf") /* Unallocated space */
+ TEST_RR( "usub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "usub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe65cfffa @ usub8 pc, r12, r10")
+
+ TEST_RR( "uqadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff1a @ uqadd16 pc, r12, r10")
+ TEST_RR( "uqasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff3a @ uqasx pc, r12, r10")
+ TEST_RR( "uqsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff5a @ uqsax pc, r12, r10")
+ TEST_RR( "uqsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff7a @ uqsub16 pc, r12, r10")
+ TEST_RR( "uqadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cff9a @ uqadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe66000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe66fffdf") /* Unallocated space */
+ TEST_RR( "uqsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uqsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe66cfffa @ uqsub8 pc, r12, r10")
+
+ TEST_RR( "uhadd16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff1a @ uhadd16 pc, r12, r10")
+ TEST_RR( "uhasx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhasx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff3a @ uhasx pc, r12, r10")
+ TEST_RR( "uhsax r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsax r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff5a @ uhsax pc, r12, r10")
+ TEST_RR( "uhsub16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub16 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff7a @ uhsub16 pc, r12, r10")
+ TEST_RR( "uhadd8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhadd8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cff9a @ uhadd8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67000b0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffbf") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67000d0") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe67fffdf") /* Unallocated space */
+ TEST_RR( "uhsub8 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uhsub8 r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe67cfffa @ uhsub8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe67feffa @ uhsub8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe67cefff @ uhsub8 r14, r12, pc")
+#endif /* __LINUX_ARM_ARCH__ >= 7 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Packing, unpacking, saturation, and reversal")
+
+ TEST_RR( "pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_UNSUPPORTED(".word 0xe68cf11a @ pkhbt pc, r12, r10, lsl #2")
+ TEST_RR( "pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+ TEST_UNSUPPORTED(".word 0xe68cf15a @ pkhtb pc, r12, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68fe15a @ pkhtb r14, pc, r10, asr #2")
+ TEST_UNSUPPORTED(".word 0xe68ce15f @ pkhtb r14, r12, pc, asr #2")
+ TEST_UNSUPPORTED(".word 0xe6900010") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fffdf") /* Unallocated space */
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6b7f01c @ ssat pc, #24, r12")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".word 0xe6f7f01c @ usat pc, #24, r12")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe68cf47a @ sxtab16 pc,r12, r10, ror #8")
+
+ TEST_RR( "sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "sel r14, r",12,VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe68cffba @ sel pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe68fefba @ sel r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe68cefbf @ sel r14, r12, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6abff3c @ ssat16 pc, #12, r12")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6acf47a @ sxtab pc,r12, r10, ror #8")
+
+ TEST_R( "rev r0, r",0, VAL1,"")
+ TEST_R( "rev r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfff3c @ rev pc, r12")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6bcf47a @ sxtah pc,r12, r10, ror #8")
+
+ TEST_R( "rev16 r0, r",0, VAL1,"")
+ TEST_R( "rev16 r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6bfffbc @ rev16 pc, r12")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ccf47a @ uxtab16 pc,r12, r10, ror #8")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".word 0xe6ecff3c @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".word 0xe6ecef3f @ usat16 r14, #12, pc")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6ecf47a @ uxtab pc,r12, r10, ror #8")
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_R( "rbit r0, r",0, VAL1,"")
+ TEST_R( "rbit r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ rbit pc, r12")
+#endif
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+ TEST_UNSUPPORTED(".word 0xe6fff077 @ uxth pc, r7")
+ TEST_UNSUPPORTED(".word 0xe6ff807f @ uxth r8, pc")
+ TEST_UNSUPPORTED(".word 0xe6fcf47a @ uxtah pc, r12, r10, ror #8")
+ TEST_UNSUPPORTED(".word 0xe6fce47f @ uxtah r14, r12, pc, ror #8")
+
+ TEST_R( "revsh r0, r",0, VAL1,"")
+ TEST_R( "revsh r14, r",12, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe6ffff3c @ revsh pc, r12")
+ TEST_UNSUPPORTED(".word 0xe6ffef3f @ revsh r14, pc")
+
+ TEST_UNSUPPORTED(".word 0xe6900070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe69fff7f") /* Unallocated space */
+
+ TEST_UNSUPPORTED(".word 0xe6d00070") /* Unallocated space */
+ TEST_UNSUPPORTED(".word 0xe6dfff7f") /* Unallocated space */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_GROUP("Signed multiplies")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a1c @ smlad pc, r12, r10, r8")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a3c @ smladx pc, r12, r10, r8")
+
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa1c @ smuad pc, r12, r10")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa3c @ smuadx pc, r12, r10")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a5c @ smlsd pc, r12, r10, r8")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe70f8a7c @ smlsdx pc, r12, r10, r8")
+
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa5c @ smusd pc, r12, r10")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+ TEST_UNSUPPORTED(".word 0xe70ffa7c @ smusdx pc, r12, r10")
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af819 @ smlald pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb819 @ smlald r11, pc, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74ab81f @ smlald r11, r10, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe74abf19 @ smlald r11, r10, r9, pc")
+
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_UNSUPPORTED(".word 0xe74af839 @ smlaldx pc, r10, r9, r8")
+ TEST_UNSUPPORTED(".word 0xe74fb839 @ smlaldx r11, pc, r9, r8")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a1c @ smmla pc, r12, r10, r8")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8a3c @ smmlar pc, r12, r10, r8")
+
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ smmul pc, r12, r10")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa3c @ smmulr pc, r12, r10")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8adc @ smmls pc, r12, r10, r8")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_UNSUPPORTED(".word 0xe75f8afc @ smmlsr pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8aff @ smmlsr r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe75e8ffc @ smmlsr r14, r12, pc, r8")
+ TEST_UNSUPPORTED(".word 0xe75efafc @ smmlsr r14, r12, r10, pc")
+
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_UNSUPPORTED(".word 0xe75ffa1c @ usad8 pc, r12, r10")
+ TEST_UNSUPPORTED(".word 0xe75efa1f @ usad8 r14, pc, r10")
+ TEST_UNSUPPORTED(".word 0xe75eff1c @ usad8 r14, r12, pc")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_UNSUPPORTED(".word 0xe78f8a1c @ usada8 pc, r12, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8a1f @ usada8 r14, pc, r10, r8")
+ TEST_UNSUPPORTED(".word 0xe78e8f1c @ usada8 r14, r12, pc, r8")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_GROUP("Bit Field")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfxeq r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7aff45c @ sbfx pc, r12, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfxcs r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".word 0xe7eff45c @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".word 0xe7efc45f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfcvs r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".word 0xe7def01f @ bfc pc, #0, #31");
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfipl r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".word 0xe7d7f21e @ bfi pc, r14, #4, #20")
+
+ TEST_UNSUPPORTED(".word 0x07f000f0") /* Permanently UNDEFINED */
+ TEST_UNSUPPORTED(".word 0x07ffffff") /* Permanently UNDEFINED */
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ TEST_GROUP("Branch, branch with link, and block data transfer")
+
+ TEST_P( "stmda r",0, 16*4,", {r0}")
+ TEST_P( "stmeqda r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmneda r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmda r",13,0, "!, {pc}")
+
+ TEST_P( "ldmda r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmcsda r",4, 15*4,", {r0-r15}")
+ TEST_BF_P("ldmccda r",7, 15*4,"!, {r8-r15}")
+ TEST_P( "ldmda r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmda r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmia r",0, 16*4,", {r0}")
+ TEST_P( "stmmiia r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmplia r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmia r",14,0, "!, {pc}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmvsia r",4, 0, ", {r0-r15}")
+ TEST_BF_P("ldmvcia r",7, 8*4, "!, {r8-r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,15*4,"!, {pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0}")
+ TEST_P( "stmhidb r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmlsdb r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmdb r",13,4, "!, {pc}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmgedb r",4, 16*4,", {r0-r15}")
+ TEST_BF_P("ldmltdb r",7, 16*4,"!, {r8-r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {pc}")
+
+ TEST_P( "stmib r",0, 16*4,", {r0}")
+ TEST_P( "stmgtib r",4, 16*4,", {r0-r15}")
+ TEST_P( "stmleib r",8, 16*4,"!, {r8-r15}")
+ TEST_P( "stmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_P( "stmib r",13,-4, "!, {pc}")
+
+ TEST_P( "ldmib r",0, 16*4,", {r0}")
+ TEST_BF_P("ldmeqib r",4, -4,", {r0-r15}")
+ TEST_BF_P("ldmneib r",7, 7*4,"!, {r8-r15}")
+ TEST_P( "ldmib r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmib r",14,14*4,"!, {pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmeqdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmnedb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmccia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmcsia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+#ifdef CONFIG_THUMB2_KERNEL
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmplia r",0,15*4,", {pc}")
+ TEST_ARM_TO_THUMB_INTERWORK_P("ldmmiia r",13,0,", {r0-r15}")
+#endif
+ TEST_BF("b 2f")
+ TEST_BF("bl 2f")
+ TEST_BB("b 2b")
+ TEST_BB("bl 2b")
+
+ TEST_BF("beq 2f")
+ TEST_BF("bleq 2f")
+ TEST_BB("bne 2b")
+ TEST_BB("blne 2b")
+
+ TEST_BF("bgt 2f")
+ TEST_BF("blgt 2f")
+ TEST_BB("blt 2b")
+ TEST_BB("bllt 2b")
+
+ TEST_GROUP("Supervisor Call, and coprocessor instructions")
+
+ /*
+ * We can't really test these by executing them, so all
+ * we can do is check that probes are, or are not allowed.
+ * At the moment none are allowed...
+ */
+#define TEST_COPROCESSOR(code) TEST_UNSUPPORTED(code)
+
+#define COPROCESSOR_INSTRUCTIONS_ST_LD(two,cc) \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("stc"two"l 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two" 0, cr0, [r13], {1}") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13, #-4]!") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], #-4") \
+ TEST_COPROCESSOR("ldc"two"l 0, cr0, [r13], {1}") \
+ \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"daf0001 @ stc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d2f0001 @ stc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"caf0001 @ stc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c2f0001 @ stc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"def0001 @ stc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d6f0001 @ stc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cef0001 @ stc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c6f0001 @ stc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "stc"two"l 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dbf0001 @ ldc"two" 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d3f0001 @ ldc"two" 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cbf0001 @ ldc"two" 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c3f0001 @ ldc"two" 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two" 0, cr0, [r15], {1}") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #4]") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15, #-4]") \
+ TEST_UNSUPPORTED(".word 0x"cc"dff0001 @ ldc"two"l 0, cr0, [r15, #4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"d7f0001 @ ldc"two"l 0, cr0, [r15, #-4]!") \
+ TEST_UNSUPPORTED(".word 0x"cc"cff0001 @ ldc"two"l 0, cr0, [r15], #4") \
+ TEST_UNSUPPORTED(".word 0x"cc"c7f0001 @ ldc"two"l 0, cr0, [r15], #-4") \
+ TEST_COPROCESSOR( "ldc"two"l 0, cr0, [r15], {1}")
+
+#define COPROCESSOR_INSTRUCTIONS_MC_MR(two,cc) \
+ \
+ TEST_COPROCESSOR( "mcrr"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mcrr"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c4f00f0 @ mcrr"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c40ff0f @ mcrr"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "mrrc"two" 0, 15, r0, r14, cr0") \
+ TEST_COPROCESSOR( "mrrc"two" 15, 0, r14, r0, cr15") \
+ TEST_UNSUPPORTED(".word 0x"cc"c5f00f0 @ mrrc"two" 0, 15, r0, r15, cr0") \
+ TEST_UNSUPPORTED(".word 0x"cc"c50ff0f @ mrrc"two" 15, 0, r15, r0, cr15") \
+ TEST_COPROCESSOR( "cdp"two" 15, 15, cr15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "cdp"two" 0, 0, cr0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mcr"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mcr"two" 0, 0, r0, cr0, cr0, 0") \
+ TEST_COPROCESSOR( "mrc"two" 15, 7, r15, cr15, cr15, 7") \
+ TEST_COPROCESSOR( "mrc"two" 0, 0, r0, cr0, cr0, 0")
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("","e")
+ COPROCESSOR_INSTRUCTIONS_MC_MR("","e")
+ TEST_UNSUPPORTED("svc 0")
+ TEST_UNSUPPORTED("svc 0xffffff")
+
+ TEST_UNSUPPORTED("svc 0")
+
+ TEST_GROUP("Unconditional instruction")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("srsda sp, 0x13")
+ TEST_UNSUPPORTED("srsdb sp, 0x13")
+ TEST_UNSUPPORTED("srsia sp, 0x13")
+ TEST_UNSUPPORTED("srsib sp, 0x13")
+ TEST_UNSUPPORTED("srsda sp!, 0x13")
+ TEST_UNSUPPORTED("srsdb sp!, 0x13")
+ TEST_UNSUPPORTED("srsia sp!, 0x13")
+ TEST_UNSUPPORTED("srsib sp!, 0x13")
+
+ TEST_UNSUPPORTED("rfeda sp")
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfeib sp")
+ TEST_UNSUPPORTED("rfeda sp!")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+ TEST_UNSUPPORTED("rfeib sp!")
+ TEST_UNSUPPORTED(".word 0xf81d0a00 @ rfeda pc")
+ TEST_UNSUPPORTED(".word 0xf91d0a00 @ rfedb pc")
+ TEST_UNSUPPORTED(".word 0xf89d0a00 @ rfeia pc")
+ TEST_UNSUPPORTED(".word 0xf99d0a00 @ rfeib pc")
+ TEST_UNSUPPORTED(".word 0xf83d0a00 @ rfeda pc!")
+ TEST_UNSUPPORTED(".word 0xf93d0a00 @ rfedb pc!")
+ TEST_UNSUPPORTED(".word 0xf8bd0a00 @ rfeia pc!")
+ TEST_UNSUPPORTED(".word 0xf9bd0a00 @ rfeib pc!")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_X( "blx __dummy_thumb_subroutine_even",
+ ".thumb \n\t"
+ ".space 4 \n\t"
+ ".type __dummy_thumb_subroutine_even, %%function \n\t"
+ "__dummy_thumb_subroutine_even: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_even")
+
+ TEST_X( "blx __dummy_thumb_subroutine_odd",
+ ".thumb \n\t"
+ ".space 2 \n\t"
+ ".type __dummy_thumb_subroutine_odd, %%function \n\t"
+ "__dummy_thumb_subroutine_odd: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".arm \n\t"
+ )
+ TEST( "blx __dummy_thumb_subroutine_odd")
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
+ COPROCESSOR_INSTRUCTIONS_ST_LD("2","f")
+#if __LINUX_ARM_ARCH__ >= 6
+ COPROCESSOR_INSTRUCTIONS_MC_MR("2","f")
+#endif
+
+ TEST_GROUP("Miscellaneous instructions, memory hints, and Advanced SIMD instructions")
+
+#if __LINUX_ARM_ARCH__ >= 6
+ TEST_UNSUPPORTED("cps 0x13")
+ TEST_UNSUPPORTED("cpsie i")
+ TEST_UNSUPPORTED("cpsid i")
+ TEST_UNSUPPORTED("cpsie i,0x13")
+ TEST_UNSUPPORTED("cpsid i,0x13")
+ TEST_UNSUPPORTED("setend le")
+ TEST_UNSUPPORTED("setend be")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_P("pli [r",0,0b,", #16]")
+ TEST( "pli [pc, #0]")
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 5
+ TEST_P("pld [r",0,32,", #-16]")
+ TEST( "pld [pc, #0]")
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", -r",12,16,", lsl #4]")
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_SUPPORTED( ".word 0xf590f000 @ pldw [r0, #0]")
+ TEST_SUPPORTED( ".word 0xf797f000 @ pldw [r7, r0]")
+ TEST_SUPPORTED( ".word 0xf798f18c @ pldw [r8, r12, lsl #3]");
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+#endif
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test-thumb.c b/arch/arm/kernel/kprobes-test-thumb.c
new file mode 100644
index 0000000..5e726c3
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test-thumb.c
@@ -0,0 +1,1187 @@
+/*
+ * arch/arm/kernel/kprobes-test-thumb.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "kprobes-test.h"
+
+
+#define TEST_ISA "16"
+
+#define DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_flags |= TEST_FLAG_NO_ITBLOCK; \
+ tests \
+ kprobe_test_flags &= ~TEST_FLAG_NO_ITBLOCK;
+
+#define CONDITION_INSTRUCTIONS(cc_pos, tests) \
+ kprobe_test_cc_position = cc_pos; \
+ DONT_TEST_IN_ITBLOCK(tests) \
+ kprobe_test_cc_position = 0;
+
+#define TEST_ITBLOCK(code) \
+ kprobe_test_flags |= TEST_FLAG_FULL_ITBLOCK; \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " mov r1, #0x11 \n\t" \
+ " mov r2, #0x22 \n\t" \
+ " mov r3, #0x33 \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END \
+ kprobe_test_flags &= ~TEST_FLAG_FULL_ITBLOCK;
+
+#define TEST_THUMB_TO_ARM_INTERWORK_P(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_PTR(reg, val) \
+ TEST_ARG_REG(14, 99f+1) \
+ TEST_ARG_MEM(15, 3f) \
+ TEST_ARG_END("") \
+ " nop \n\t" /* To align 1f */ \
+ "50: nop \n\t" \
+ "1: "code1 #reg code2" \n\t" \
+ " bx lr \n\t" \
+ ".arm \n\t" \
+ "3: adr lr, 2f+1 \n\t" \
+ " bx lr \n\t" \
+ ".thumb \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+
+void kprobe_thumb16_test_cases(void)
+{
+ kprobe_test_flags = TEST_FLAG_NARROW_INSTR;
+
+ TEST_GROUP("Shift (immediate), add, subtract, move, and compare")
+
+ TEST_R( "lsls r7, r",0,VAL1,", #5")
+ TEST_R( "lsls r0, r",7,VAL2,", #11")
+ TEST_R( "lsrs r7, r",0,VAL1,", #5")
+ TEST_R( "lsrs r0, r",7,VAL2,", #11")
+ TEST_R( "asrs r7, r",0,VAL1,", #5")
+ TEST_R( "asrs r0, r",7,VAL2,", #11")
+ TEST_RR( "adds r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "adds r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_RR( "subs r2, r",0,VAL1,", r",7,VAL2,"")
+ TEST_RR( "subs r5, r",7,VAL2,", r",0,VAL2,"")
+ TEST_R( "adds r7, r",0,VAL1,", #5")
+ TEST_R( "adds r0, r",7,VAL2,", #2")
+ TEST_R( "subs r7, r",0,VAL1,", #5")
+ TEST_R( "subs r0, r",7,VAL2,", #2")
+ TEST( "movs.n r0, #0x5f")
+ TEST( "movs.n r7, #0xa0")
+ TEST_R( "cmp.n r",0,0x5e, ", #0x5f")
+ TEST_R( "cmp.n r",5,0x15f,", #0x5f")
+ TEST_R( "cmp.n r",7,0xa0, ", #0xa0")
+ TEST_R( "adds.n r",0,VAL1,", #0x5f")
+ TEST_R( "adds.n r",7,VAL2,", #0xa0")
+ TEST_R( "subs.n r",0,VAL1,", #0x5f")
+ TEST_R( "subs.n r",7,VAL2,", #0xa0")
+
+ TEST_GROUP("16-bit Thumb data-processing instructions")
+
+#define DATA_PROCESSING16(op,val) \
+ TEST_RR( op" r",0,VAL1,", r",7,val,"") \
+ TEST_RR( op" r",7,VAL2,", r",0,val,"")
+
+ DATA_PROCESSING16("ands",0xf00f00ff)
+ DATA_PROCESSING16("eors",0xf00f00ff)
+ DATA_PROCESSING16("lsls",11)
+ DATA_PROCESSING16("lsrs",11)
+ DATA_PROCESSING16("asrs",11)
+ DATA_PROCESSING16("adcs",VAL2)
+ DATA_PROCESSING16("sbcs",VAL2)
+ DATA_PROCESSING16("rors",11)
+ DATA_PROCESSING16("tst",0xf00f00ff)
+ TEST_R("rsbs r",0,VAL1,", #0")
+ TEST_R("rsbs r",7,VAL2,", #0")
+ DATA_PROCESSING16("cmp",0xf00f00ff)
+ DATA_PROCESSING16("cmn",0xf00f00ff)
+ DATA_PROCESSING16("orrs",0xf00f00ff)
+ DATA_PROCESSING16("muls",VAL2)
+ DATA_PROCESSING16("bics",0xf00f00ff)
+ DATA_PROCESSING16("mvns",VAL2)
+
+ TEST_GROUP("Special data instructions and branch and exchange")
+
+ TEST_RR( "add r",0, VAL1,", r",7,VAL2,"")
+ TEST_RR( "add r",3, VAL2,", r",8,VAL3,"")
+ TEST_RR( "add r",8, VAL3,", r",0,VAL1,"")
+ TEST_R( "add sp" ", r",8,-8, "")
+ TEST_R( "add r",14,VAL1,", pc")
+ TEST_BF_R("add pc" ", r",0,2f-1f-8,"")
+ TEST_UNSUPPORTED(".short 0x44ff @ add pc, pc")
+
+ TEST_RR( "cmp r",3,VAL1,", r",8,VAL2,"")
+ TEST_RR( "cmp r",8,VAL2,", r",0,VAL1,"")
+ TEST_R( "cmp sp" ", r",8,-8, "")
+
+ TEST_R( "mov r0, r",7,VAL2,"")
+ TEST_R( "mov r3, r",8,VAL3,"")
+ TEST_R( "mov r8, r",0,VAL1,"")
+ TEST_P( "mov sp, r",8,-8, "")
+ TEST( "mov lr, pc")
+ TEST_BF_R("mov pc, r",0,2f, "")
+
+ TEST_BF_R("bx r",0, 2f+1,"")
+ TEST_BF_R("bx r",14,2f+1,"")
+ TESTCASE_START("bx pc")
+ TEST_ARG_REG(14, 99f+1)
+ TEST_ARG_END("")
+ " nop \n\t" /* To align the bx pc*/
+ "50: nop \n\t"
+ "1: bx pc \n\t"
+ " bx lr \n\t"
+ ".arm \n\t"
+ " adr lr, 2f+1 \n\t"
+ " bx lr \n\t"
+ ".thumb \n\t"
+ "2: nop \n\t"
+ TESTCASE_END
+
+ TEST_BF_R("blx r",0, 2f+1,"")
+ TEST_BB_R("blx r",14,2f+1,"")
+ TEST_UNSUPPORTED(".short 0x47f8 @ blx pc")
+
+ TEST_GROUP("Load from Literal Pool")
+
+ TEST_X( "ldr r0, 3f",
+ ".align \n\t"
+ "3: .word "__stringify(VAL1))
+ TEST_X( "ldr r7, 3f",
+ ".space 128 \n\t"
+ ".align \n\t"
+ "3: .word "__stringify(VAL2))
+
+ TEST_GROUP("16-bit Thumb Load/store instructions")
+
+ TEST_RPR("str r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("str r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strh r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strh r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_RPR("strb r",0, VAL1,", [r",1, 24,", r",2, 48,"]")
+ TEST_RPR("strb r",7, VAL2,", [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrsb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldr r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldr r7, [r",6, 24,", r",5, 48,"]")
+ TEST_PR( "ldrh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrh r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrb r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrb r7, [r",6, 24,", r",5, 50,"]")
+ TEST_PR( "ldrsh r0, [r",1, 24,", r",2, 48,"]")
+ TEST_PR( "ldrsh r7, [r",6, 24,", r",5, 50,"]")
+
+ TEST_RP("str r",0, VAL1,", [r",1, 24,", #120]")
+ TEST_RP("str r",7, VAL2,", [r",6, 24,", #120]")
+ TEST_P( "ldr r0, [r",1, 24,", #120]")
+ TEST_P( "ldr r7, [r",6, 24,", #120]")
+ TEST_RP("strb r",0, VAL1,", [r",1, 24,", #30]")
+ TEST_RP("strb r",7, VAL2,", [r",6, 24,", #30]")
+ TEST_P( "ldrb r0, [r",1, 24,", #30]")
+ TEST_P( "ldrb r7, [r",6, 24,", #30]")
+ TEST_RP("strh r",0, VAL1,", [r",1, 24,", #60]")
+ TEST_RP("strh r",7, VAL2,", [r",6, 24,", #60]")
+ TEST_P( "ldrh r0, [r",1, 24,", #60]")
+ TEST_P( "ldrh r7, [r",6, 24,", #60]")
+
+ TEST_R( "str r",0, VAL1,", [sp, #0]")
+ TEST_R( "str r",7, VAL2,", [sp, #160]")
+ TEST( "ldr r0, [sp, #0]")
+ TEST( "ldr r7, [sp, #160]")
+
+ TEST_RP("str r",0, VAL1,", [r",0, 24,"]")
+ TEST_P( "ldr r0, [r",0, 24,"]")
+
+ TEST_GROUP("Generate PC-/SP-relative address")
+
+ TEST("add r0, pc, #4")
+ TEST("add r7, pc, #1020")
+ TEST("add r0, sp, #4")
+ TEST("add r7, sp, #1020")
+
+ TEST_GROUP("Miscellaneous 16-bit instructions")
+
+ TEST_UNSUPPORTED( "cpsie i")
+ TEST_UNSUPPORTED( "cpsid i")
+ TEST_UNSUPPORTED( "setend le")
+ TEST_UNSUPPORTED( "setend be")
+
+ TEST("add sp, #"__stringify(TEST_MEMORY_SIZE)) /* Assumes TEST_MEMORY_SIZE < 0x400 */
+ TEST("sub sp, #0x7f*4")
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_BF_R( "cbnz r",0,0, ", 2f")
+ TEST_BF_R( "cbz r",2,-1,", 2f")
+ TEST_BF_RX( "cbnz r",4,1, ", 2f",0x20)
+ TEST_BF_RX( "cbz r",7,0, ", 2f",0x40)
+)
+ TEST_R("sxth r0, r",7, HH1,"")
+ TEST_R("sxth r7, r",0, HH2,"")
+ TEST_R("sxtb r0, r",7, HH1,"")
+ TEST_R("sxtb r7, r",0, HH2,"")
+ TEST_R("uxth r0, r",7, HH1,"")
+ TEST_R("uxth r7, r",0, HH2,"")
+ TEST_R("uxtb r0, r",7, HH1,"")
+ TEST_R("uxtb r7, r",0, HH2,"")
+ TEST_R("rev r0, r",7, VAL1,"")
+ TEST_R("rev r7, r",0, VAL2,"")
+ TEST_R("rev16 r0, r",7, VAL1,"")
+ TEST_R("rev16 r7, r",0, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xba80")
+ TEST_UNSUPPORTED(".short 0xbabf")
+ TEST_R("revsh r0, r",7, VAL1,"")
+ TEST_R("revsh r7, r",0, VAL2,"")
+
+#define TEST_POPPC(code, offset) \
+ TESTCASE_START(code) \
+ TEST_ARG_PTR(13, offset) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code,0) \
+ TESTCASE_END
+
+ TEST("push {r0}")
+ TEST("push {r7}")
+ TEST("push {r14}")
+ TEST("push {r0-r7,r14}")
+ TEST("push {r0,r2,r4,r6,r14}")
+ TEST("push {r1,r3,r5,r7}")
+ TEST("pop {r0}")
+ TEST("pop {r7}")
+ TEST("pop {r0,r2,r4,r6}")
+ TEST_POPPC("pop {pc}",15*4)
+ TEST_POPPC("pop {r0-r7,pc}",7*4)
+ TEST_POPPC("pop {r1,r3,r5,r7,pc}",11*4)
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {pc} @ ",13,15*4,"")
+ TEST_THUMB_TO_ARM_INTERWORK_P("pop {r0-r7,pc} @ ",13,7*4,"")
+
+ TEST_UNSUPPORTED("bkpt.n 0")
+ TEST_UNSUPPORTED("bkpt.n 255")
+
+ TEST_SUPPORTED("yield")
+ TEST("sev")
+ TEST("nop")
+ TEST("wfi")
+ TEST_SUPPORTED("wfe")
+ TEST_UNSUPPORTED(".short 0xbf50") /* Unassigned hints */
+ TEST_UNSUPPORTED(".short 0xbff0") /* Unassigned hints */
+
+#define TEST_IT(code, code2) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ "50: nop \n\t" \
+ "1: "code" \n\t" \
+ " "code2" \n\t" \
+ "2: nop \n\t" \
+ TESTCASE_END
+
+DONT_TEST_IN_ITBLOCK(
+ TEST_IT("it eq","moveq r0,#0")
+ TEST_IT("it vc","movvc r0,#0")
+ TEST_IT("it le","movle r0,#0")
+ TEST_IT("ite eq","moveq r0,#0\n\t movne r1,#1")
+ TEST_IT("itet vc","movvc r0,#0\n\t movvs r1,#1\n\t movvc r2,#2")
+ TEST_IT("itete le","movle r0,#0\n\t movgt r1,#1\n\t movle r2,#2\n\t movgt r3,#3")
+ TEST_IT("itttt le","movle r0,#0\n\t movle r1,#1\n\t movle r2,#2\n\t movle r3,#3")
+ TEST_IT("iteee le","movle r0,#0\n\t movgt r1,#1\n\t movgt r2,#2\n\t movgt r3,#3")
+)
+
+ TEST_GROUP("Load and store multiple")
+
+ TEST_P("ldmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("ldmia r",7, 16*4,"!, {r0-r6}")
+ TEST_P("stmia r",4, 16*4,"!, {r0,r7}")
+ TEST_P("stmia r",0, 16*4,"!, {r0-r7}")
+
+ TEST_GROUP("Conditional branch and Supervisor Call instructions")
+
+CONDITION_INSTRUCTIONS(8,
+ TEST_BF("beq 2f")
+ TEST_BB("bne 2b")
+ TEST_BF("bgt 2f")
+ TEST_BB("blt 2b")
+)
+ TEST_UNSUPPORTED(".short 0xde00")
+ TEST_UNSUPPORTED(".short 0xdeff")
+ TEST_UNSUPPORTED("svc #0x00")
+ TEST_UNSUPPORTED("svc #0xff")
+
+ TEST_GROUP("Unconditional branch")
+
+ TEST_BF( "b 2f")
+ TEST_BB( "b 2b")
+ TEST_BF_X("b 2f", 0x400)
+ TEST_BB_X("b 2b", 0x400)
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("subs.n r0, r0")
+
+ verbose("\n");
+}
+
+
+void kprobe_thumb32_test_cases(void)
+{
+ kprobe_test_flags = 0;
+
+ TEST_GROUP("Load/store multiple")
+
+ TEST_UNSUPPORTED("rfedb sp")
+ TEST_UNSUPPORTED("rfeia sp")
+ TEST_UNSUPPORTED("rfedb sp!")
+ TEST_UNSUPPORTED("rfeia sp!")
+
+ TEST_P( "stmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmia r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmia r",7, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmia r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmia r",4, 0, ", {r0-r12,r14}")
+ TEST_BF_P("ldmia r",5, 8*4, "!, {r6-r12,r15}")
+ TEST_P( "ldmia r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmia r",14,14*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "stmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_P( "stmdb r",5, 16*4,"!, {r8-r12,r14}")
+ TEST_P( "stmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+
+ TEST_P( "ldmdb r",0, 16*4,", {r0,r8}")
+ TEST_P( "ldmdb r",4, 16*4,", {r0-r12,r14}")
+ TEST_BF_P("ldmdb r",5, 16*4,"!, {r6-r12,r15}")
+ TEST_P( "ldmdb r",12,16*4,"!, {r1,r3,r5,r7,r8-r11,r14}")
+ TEST_BF_P("ldmdb r",14,16*4,"!, {r4,pc}")
+
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r3-r12}")
+ TEST_P( "stmdb r",2, 16*4,", {r3-r12,lr}")
+ TEST_P( "stmdb r",13,16*4,"!, {r2-r12,lr}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12}")
+ TEST_P( "stmdb r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_BF_P("ldmia r",13,5*4, "!, {r3-r12,pc}")
+ TEST_P( "ldmia r",13,5*4, "!, {r3-r12}")
+ TEST_BF_P("ldmia r",2, 5*4, "!, {r3-r12,pc}")
+ TEST_BF_P("ldmia r",13,4*4, "!, {r2-r12,pc}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12}")
+ TEST_P( "ldmia r",0, 16*4,", {r0-r12,lr}")
+
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",0,14*4,", {r12,pc}")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldmia r",13,2*4,", {r0-r12,pc}")
+
+ TEST_UNSUPPORTED(".short 0xe88f,0x0101 @ stmia pc, {r0,r8}")
+ TEST_UNSUPPORTED(".short 0xe92f,0x5f00 @ stmdb pc!, {r8-r12,r14}")
+ TEST_UNSUPPORTED(".short 0xe8bd,0xc000 @ ldmia r13!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0xc000 @ ldmdb r14!, {r14,pc}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x3f00 @ stmia r7!, {r8-r12,sp}")
+ TEST_UNSUPPORTED(".short 0xe8a7,0x9f00 @ stmia r7!, {r8-r12,pc}")
+ TEST_UNSUPPORTED(".short 0xe93e,0x2010 @ ldmdb r14!, {r4,sp}")
+
+ TEST_GROUP("Load/store double or exclusive, table branch")
+
+ TEST_P( "ldrd r0, r1, [r",1, 24,", #-16]")
+ TEST( "ldrd r12, r14, [sp, #16]")
+ TEST_P( "ldrd r1, r0, [r",7, 24,", #-16]!")
+ TEST( "ldrd r14, r12, [sp, #16]!")
+ TEST_P( "ldrd r1, r0, [r",7, 24,"], #16")
+ TEST( "ldrd r7, r8, [sp], #-16")
+
+ TEST_X( "ldrd r12, r14, 3f",
+ ".align 3 \n\t"
+ "3: .word "__stringify(VAL1)" \n\t"
+ " .word "__stringify(VAL2))
+
+ TEST_UNSUPPORTED(".short 0xe9ff,0xec04 @ ldrd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ff,0xec04 @ ldrd r14, r12, [pc], #16")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xd800 @ ldrd sp, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0xf800 @ ldrd pc, r8, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7d00 @ ldrd r7, sp, [r4]")
+ TEST_UNSUPPORTED(".short 0xe9d4,0x7f00 @ ldrd r7, pc, [r4]")
+
+ TEST_RRP("strd r",0, VAL1,", r",1, VAL2,", [r",1, 24,", #-16]")
+ TEST_RR( "strd r",12,VAL2,", r",14,VAL1,", [sp, #16]")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,", #-16]!")
+ TEST_RR( "strd r",14,VAL2,", r",12,VAL1,", [sp, #16]!")
+ TEST_RRP("strd r",1, VAL1,", r",0, VAL2,", [r",7, 24,"], #16")
+ TEST_RR( "strd r",7, VAL2,", r",8, VAL1,", [sp], #-16")
+ TEST_UNSUPPORTED(".short 0xe9ef,0xec04 @ strd r14, r12, [pc, #16]!")
+ TEST_UNSUPPORTED(".short 0xe8ef,0xec04 @ strd r14, r12, [pc], #16")
+
+ TEST_RX("tbb [pc, r",0, (9f-(1f+4)),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbb [pc, r",4, (9f-(1f+4)+1),"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbb [r",1,9f,", r",2,0,"]",
+ "9: \n\t"
+ ".byte (2f-1b-4)>>1 \n\t"
+ ".byte (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",7, (9f-(1f+4))>>1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RX("tbh [pc, r",12, ((9f-(1f+4))>>1)+1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_RRX("tbh [r",1,9f, ", r",14,1,"]",
+ "9: \n\t"
+ ".short (2f-1b-4)>>1 \n\t"
+ ".short (3f-1b-4)>>1 \n\t"
+ "3: mvn r0, r0 \n\t"
+ "2: nop \n\t")
+
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01f @ tbh [r1, pc]")
+ TEST_UNSUPPORTED(".short 0xe8d1,0xf01d @ tbh [r1, sp]")
+ TEST_UNSUPPORTED(".short 0xe8dd,0xf012 @ tbh [sp, r2]")
+
+ TEST_UNSUPPORTED("strexb r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexh r0, r1, [r2]")
+ TEST_UNSUPPORTED("strexd r0, r1, [r2]")
+ TEST_UNSUPPORTED("ldrexb r0, [r1]")
+ TEST_UNSUPPORTED("ldrexh r0, [r1]")
+ TEST_UNSUPPORTED("ldrexd r0, [r1]")
+
+ TEST_GROUP("Data-processing (shifted register) and (modified immediate)")
+
+#define _DATA_PROCESSING32_DNM(op,s,val) \
+ TEST_RR(op s".w r0, r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op s" r1, r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op s" r2, r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op s" r3, r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op s" r4, r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op s" r5, r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op s" r8, r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op s" r0, r",11,VAL1,", #0x00010001") \
+ TEST_R( op s" r11, r",0, VAL1,", #0xf5000000") \
+ TEST_R( op s" r7, r",8, VAL2,", #0x000af000")
+
+#define DATA_PROCESSING32_DNM(op,val) \
+ _DATA_PROCESSING32_DNM(op,"",val) \
+ _DATA_PROCESSING32_DNM(op,"s",val)
+
+#define DATA_PROCESSING32_NM(op,val) \
+ TEST_RR(op".w r",1, VAL1,", r",2, val, "") \
+ TEST_RR(op" r",1, VAL1,", r",2, val, ", lsl #3") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", lsr #4") \
+ TEST_RR(op" r",3, VAL1,", r",2, val, ", asr #5") \
+ TEST_RR(op" r",5, VAL1,", r",2, N(val),", asr #6") \
+ TEST_RR(op" r",5, VAL1,", r",2, val, ", ror #7") \
+ TEST_RR(op" r",9, VAL1,", r",10,val, ", rrx") \
+ TEST_R( op" r",11,VAL1,", #0x00010001") \
+ TEST_R( op" r",0, VAL1,", #0xf5000000") \
+ TEST_R( op" r",8, VAL2,", #0x000af000")
+
+#define _DATA_PROCESSING32_DM(op,s,val) \
+ TEST_R( op s".w r0, r",14, val, "") \
+ TEST_R( op s" r1, r",12, val, ", lsl #3") \
+ TEST_R( op s" r2, r",11, val, ", lsr #4") \
+ TEST_R( op s" r3, r",10, val, ", asr #5") \
+ TEST_R( op s" r4, r",9, N(val),", asr #6") \
+ TEST_R( op s" r5, r",8, val, ", ror #7") \
+ TEST_R( op s" r8, r",7,val, ", rrx") \
+ TEST( op s" r0, #0x00010001") \
+ TEST( op s" r11, #0xf5000000") \
+ TEST( op s" r7, #0x000af000") \
+ TEST( op s" r4, #0x00005a00")
+
+#define DATA_PROCESSING32_DM(op,val) \
+ _DATA_PROCESSING32_DM(op,"",val) \
+ _DATA_PROCESSING32_DM(op,"s",val)
+
+ DATA_PROCESSING32_DNM("and",0xf00f00ff)
+ DATA_PROCESSING32_NM("tst",0xf00f00ff)
+ DATA_PROCESSING32_DNM("bic",0xf00f00ff)
+ DATA_PROCESSING32_DNM("orr",0xf00f00ff)
+ DATA_PROCESSING32_DM("mov",VAL2)
+ DATA_PROCESSING32_DNM("orn",0xf00f00ff)
+ DATA_PROCESSING32_DM("mvn",VAL2)
+ DATA_PROCESSING32_DNM("eor",0xf00f00ff)
+ DATA_PROCESSING32_NM("teq",0xf00f00ff)
+ DATA_PROCESSING32_DNM("add",VAL2)
+ DATA_PROCESSING32_NM("cmn",VAL2)
+ DATA_PROCESSING32_DNM("adc",VAL2)
+ DATA_PROCESSING32_DNM("sbc",VAL2)
+ DATA_PROCESSING32_DNM("sub",VAL2)
+ DATA_PROCESSING32_NM("cmp",VAL2)
+ DATA_PROCESSING32_DNM("rsb",VAL2)
+
+ TEST_RR("pkhbt r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhbt r14,r",12, HH1,", r",10,HH2,", lsl #2")
+ TEST_RR("pkhtb r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR("pkhtb r14,r",12, HH1,", r",10,HH2,", asr #2")
+
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0d @ tst.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea17,0x0f0f @ tst.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea1d,0x0f07 @ tst.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea1f,0x0f07 @ tst.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf01d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf01f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0d @ teq.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea97,0x0f0f @ teq.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea9d,0x0f07 @ teq.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea9f,0x0f07 @ teq.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf09d,0x1f08 @ tst sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf09f,0x1f08 @ tst pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0d @ cmn.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xeb17,0x0f0f @ cmn.w r7, pc")
+ TEST_P("cmn.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xeb1f,0x0f07 @ cmn.w pc, r7")
+ TEST( "cmn sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf11f,0x1f08 @ cmn pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0d @ cmp.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xebb7,0x0f0f @ cmp.w r7, pc")
+ TEST_P("cmp.w sp, r",7,0,"")
+ TEST_UNSUPPORTED(".short 0xebbf,0x0f07 @ cmp.w pc, r7")
+ TEST( "cmp sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf1bf,0x1f08 @ cmp pc, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xea5f,0x070d @ movs.w r7, sp")
+ TEST_UNSUPPORTED(".short 0xea5f,0x070f @ movs.w r7, pc")
+ TEST_UNSUPPORTED(".short 0xea5f,0x0d07 @ movs.w sp, r7")
+ TEST_UNSUPPORTED(".short 0xea4f,0x0f07 @ mov.w pc, r7")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1d08 @ mov sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf04f,0x1f08 @ mov pc, #0x00080008")
+
+ TEST_R("add.w r0, sp, r",1, 4,"")
+ TEST_R("adds r0, sp, r",1, 4,", asl #3")
+ TEST_R("add r0, sp, r",1, 4,", asl #4")
+ TEST_R("add r0, sp, r",1, 16,", ror #1")
+ TEST_R("add.w sp, sp, r",1, 4,"")
+ TEST_R("add sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x1d01 @ add sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d71 @ add sp, sp, r1, ror #1")
+ TEST( "add.w r0, sp, #24")
+ TEST( "add.w sp, sp, #24")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0f01 @ add pc, sp, r1")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000f @ add r0, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x000d @ add r0, sp, sp")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0f @ add sp, sp, pc")
+ TEST_UNSUPPORTED(".short 0xeb0d,0x0d0d @ add sp, sp, sp")
+
+ TEST_R("sub.w r0, sp, r",1, 4,"")
+ TEST_R("subs r0, sp, r",1, 4,", asl #3")
+ TEST_R("sub r0, sp, r",1, 4,", asl #4")
+ TEST_R("sub r0, sp, r",1, 16,", ror #1")
+ TEST_R("sub.w sp, sp, r",1, 4,"")
+ TEST_R("sub sp, sp, r",1, 4,", asl #3")
+ TEST_UNSUPPORTED(".short 0xebad,0x1d01 @ sub sp, sp, r1, asl #4")
+ TEST_UNSUPPORTED(".short 0xebad,0x0d71 @ sub sp, sp, r1, ror #1")
+ TEST_UNSUPPORTED(".short 0xebad,0x0f01 @ sub pc, sp, r1")
+ TEST( "sub.w r0, sp, #24")
+ TEST( "sub.w sp, sp, #24")
+
+ TEST_UNSUPPORTED(".short 0xea02,0x010f @ and r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xea0f,0x0103 @ and r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0f03 @ and pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x010d @ and r1, r2, sp")
+ TEST_UNSUPPORTED(".short 0xea0d,0x0103 @ and r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xea02,0x0d03 @ and sp, r2, r3")
+ TEST_UNSUPPORTED(".short 0xf00d,0x1108 @ and r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf00f,0x1108 @ and r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1d08 @ and sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf002,0x1f08 @ and pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeb02,0x010f @ add r1, r2, pc")
+ TEST_UNSUPPORTED(".short 0xeb0f,0x0103 @ add r1, pc, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0f03 @ add pc, r2, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x010d @ add r1, r2, sp")
+ TEST_SUPPORTED( ".short 0xeb0d,0x0103 @ add r1, sp, r3")
+ TEST_UNSUPPORTED(".short 0xeb02,0x0d03 @ add sp, r2, r3")
+ TEST_SUPPORTED( ".short 0xf10d,0x1108 @ add r1, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10d,0x1f08 @ add pc, sp, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf10f,0x1108 @ add r1, pc, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1d08 @ add sp, r8, #0x00080008")
+ TEST_UNSUPPORTED(".short 0xf102,0x1f08 @ add pc, r8, #0x00080008")
+
+ TEST_UNSUPPORTED(".short 0xeaa0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeaf0,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb20,0x0000")
+ TEST_UNSUPPORTED(".short 0xeb80,0x0000")
+ TEST_UNSUPPORTED(".short 0xebe0,0x0000")
+
+ TEST_UNSUPPORTED(".short 0xf0a0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0c0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf0f0,0x0000")
+ TEST_UNSUPPORTED(".short 0xf120,0x0000")
+ TEST_UNSUPPORTED(".short 0xf180,0x0000")
+ TEST_UNSUPPORTED(".short 0xf1e0,0x0000")
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xec00,0x0000")
+ TEST_UNSUPPORTED(".short 0xeff0,0x0000")
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xfff0,0x0000")
+
+ TEST_GROUP("Data-processing (plain binary immediate)")
+
+ TEST_R("addw r0, r",1, VAL1,", #0x123")
+ TEST( "addw r14, sp, #0xf5a")
+ TEST( "addw sp, sp, #0x20")
+ TEST( "addw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1f20 @ addw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20d,0x1f20 @ addw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf20f,0x1d20 @ addw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf200,0x1d20 @ addw sp, r0, #0x120")
+
+ TEST_R("subw r0, r",1, VAL1,", #0x123")
+ TEST( "subw r14, sp, #0xf5a")
+ TEST( "subw sp, sp, #0x20")
+ TEST( "subw r7, pc, #0x888")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1f20 @ subw pc, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2ad,0x1f20 @ subw pc, sp, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2af,0x1d20 @ subw sp, pc, #0x120")
+ TEST_UNSUPPORTED(".short 0xf2a0,0x1d20 @ subw sp, r0, #0x120")
+
+ TEST("movw r0, #0")
+ TEST("movw r0, #0xffff")
+ TEST("movw lr, #0xffff")
+ TEST_UNSUPPORTED(".short 0xf240,0x0d00 @ movw sp, #0")
+ TEST_UNSUPPORTED(".short 0xf240,0x0f00 @ movw pc, #0")
+
+ TEST_R("movt r",0, VAL1,", #0")
+ TEST_R("movt r",0, VAL2,", #0xffff")
+ TEST_R("movt r",14,VAL1,", #0xffff")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0d00 @ movt sp, #0")
+ TEST_UNSUPPORTED(".short 0xf2c0,0x0f00 @ movt pc, #0")
+
+ TEST_R( "ssat r0, #24, r",0, VAL1,"")
+ TEST_R( "ssat r14, #24, r",12, VAL2,"")
+ TEST_R( "ssat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "ssat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0d17 @ ssat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30c,0x0f17 @ ssat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf30d,0x0c17 @ ssat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf30f,0x0c17 @ ssat r12, #24, pc")
+
+ TEST_R( "usat r0, #24, r",0, VAL1,"")
+ TEST_R( "usat r14, #24, r",12, VAL2,"")
+ TEST_R( "usat r0, #24, r",0, VAL1,", lsl #8")
+ TEST_R( "usat r14, #24, r",12, VAL2,", asr #8")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0d17 @ usat sp, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38c,0x0f17 @ usat pc, #24, r12")
+ TEST_UNSUPPORTED(".short 0xf38d,0x0c17 @ usat r12, #24, sp")
+ TEST_UNSUPPORTED(".short 0xf38f,0x0c17 @ usat r12, #24, pc")
+
+ TEST_R( "ssat16 r0, #12, r",0, HH1,"")
+ TEST_R( "ssat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0d0b @ ssat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32c,0x0f0b @ ssat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf32d,0x0c0b @ ssat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf32f,0x0c0b @ ssat16 r12, #12, pc")
+
+ TEST_R( "usat16 r0, #12, r",0, HH1,"")
+ TEST_R( "usat16 r14, #12, r",12, HH2,"")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0d0b @ usat16 sp, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ac,0x0f0b @ usat16 pc, #12, r12")
+ TEST_UNSUPPORTED(".short 0xf3ad,0x0c0b @ usat16 r12, #12, sp")
+ TEST_UNSUPPORTED(".short 0xf3af,0x0c0b @ usat16 r12, #12, pc")
+
+ TEST_R( "sbfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "sbfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "sbfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2d0f @ sbfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34c,0x2f0f @ sbfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34d,0x2c0f @ sbfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf34f,0x2c0f @ sbfx r12, pc, #8, #16")
+
+ TEST_R( "ubfx r0, r",0 , VAL1,", #0, #31")
+ TEST_R( "ubfx r14, r",12, VAL2,", #8, #16")
+ TEST_R( "ubfx r4, r",10, VAL1,", #16, #15")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2d0f @ ubfx sp, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cc,0x2f0f @ ubfx pc, r12, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cd,0x2c0f @ ubfx r12, sp, #8, #16")
+ TEST_UNSUPPORTED(".short 0xf3cf,0x2c0f @ ubfx r12, pc, #8, #16")
+
+ TEST_R( "bfc r",0, VAL1,", #4, #20")
+ TEST_R( "bfc r",14,VAL2,", #4, #20")
+ TEST_R( "bfc r",7, VAL1,", #0, #31")
+ TEST_R( "bfc r",8, VAL2,", #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0d1e @ bfc sp, #0, #31")
+ TEST_UNSUPPORTED(".short 0xf36f,0x0f1e @ bfc pc, #0, #31")
+
+ TEST_RR( "bfi r",0, VAL1,", r",0 , VAL2,", #0, #31")
+ TEST_RR( "bfi r",12,VAL1,", r",14 , VAL2,", #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1d17 @ bfi sp, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36e,0x1f17 @ bfi pc, r14, #4, #20")
+ TEST_UNSUPPORTED(".short 0xf36d,0x1e17 @ bfi r14, sp, #4, #20")
+
+ TEST_GROUP("Branches and miscellaneous control")
+
+CONDITION_INSTRUCTIONS(22,
+ TEST_BF("beq.w 2f")
+ TEST_BB("bne.w 2b")
+ TEST_BF("bgt.w 2f")
+ TEST_BB("blt.w 2b")
+ TEST_BF_X("bpl.w 2f",0x1000)
+)
+
+ TEST_UNSUPPORTED("msr cpsr, r0")
+ TEST_UNSUPPORTED("msr cpsr_f, r1")
+ TEST_UNSUPPORTED("msr spsr, r2")
+
+ TEST_UNSUPPORTED("cpsie.w i")
+ TEST_UNSUPPORTED("cpsid.w i")
+ TEST_UNSUPPORTED("cps 0x13")
+
+ TEST_SUPPORTED("yield.w")
+ TEST("sev.w")
+ TEST("nop.w")
+ TEST("wfi.w")
+ TEST_SUPPORTED("wfe.w")
+ TEST_UNSUPPORTED("dbg.w #0")
+
+ TEST_UNSUPPORTED("clrex")
+ TEST_UNSUPPORTED("dsb")
+ TEST_UNSUPPORTED("dmb")
+ TEST_UNSUPPORTED("isb")
+
+ TEST_UNSUPPORTED("bxj r0")
+
+ TEST_UNSUPPORTED("subs pc, lr, #4")
+
+ TEST("mrs r0, cpsr")
+ TEST("mrs r14, cpsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8d00 @ mrs sp, spsr")
+ TEST_UNSUPPORTED(".short 0xf3ef,0x8f00 @ mrs pc, spsr")
+ TEST_UNSUPPORTED("mrs r0, spsr")
+ TEST_UNSUPPORTED("mrs lr, spsr")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0x8000 @ smc #0")
+
+ TEST_UNSUPPORTED(".short 0xf7f0,0xa000 @ undefeined")
+
+ TEST_BF( "b.w 2f")
+ TEST_BB( "b.w 2b")
+ TEST_BF_X("b.w 2f", 0x1000)
+
+ TEST_BF( "bl.w 2f")
+ TEST_BB( "bl.w 2b")
+ TEST_BB_X("bl.w 2b", 0x1000)
+
+ TEST_X( "blx __dummy_arm_subroutine",
+ ".arm \n\t"
+ ".align \n\t"
+ ".type __dummy_arm_subroutine, %%function \n\t"
+ "__dummy_arm_subroutine: \n\t"
+ "mov r0, pc \n\t"
+ "bx lr \n\t"
+ ".thumb \n\t"
+ )
+ TEST( "blx __dummy_arm_subroutine")
+
+ TEST_GROUP("Store single data item")
+
+#define SINGLE_STORE(size) \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,-1024,", #1024]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, -1024,", #1080]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, "], #-120") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, "], #-128") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,24, ", #120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 24, ", #128]!") \
+ TEST_RP( "str"size" r",0, VAL1,", [r",11,256, ", #-120]!") \
+ TEST_RP( "str"size" r",14,VAL2,", [r",1, 256, ", #-128]!") \
+ TEST_RPR("str"size".w r",0, VAL1,", [r",1, 0,", r",2, 4,"]") \
+ TEST_RPR("str"size" r",14,VAL2,", [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_R( "str"size".w r",7, VAL1,", [sp, #24]") \
+ TEST_RP( "str"size".w r",0, VAL2,", [r",0,0, "]") \
+ TEST_UNSUPPORTED("str"size"t r0, [r1, #4]")
+
+ SINGLE_STORE("b")
+ SINGLE_STORE("h")
+ SINGLE_STORE("")
+
+ TEST("str sp, [sp]")
+ TEST_UNSUPPORTED(".short 0xf8cf,0xe000 @ str r14, [pc]")
+ TEST_UNSUPPORTED(".short 0xf8ce,0xf000 @ str pc, [r14]")
+
+ TEST_GROUP("Advanced SIMD element or structure load/store instructions")
+
+ TEST_UNSUPPORTED(".short 0xf900,0x0000")
+ TEST_UNSUPPORTED(".short 0xf92f,0xffff")
+ TEST_UNSUPPORTED(".short 0xf980,0x0000")
+ TEST_UNSUPPORTED(".short 0xf9ef,0xffff")
+
+ TEST_GROUP("Load single data item and memory hints")
+
+#define SINGLE_LOAD(size) \
+ TEST_P( "ldr"size" r0, [r",11,-1024, ", #1024]") \
+ TEST_P( "ldr"size" r14, [r",1, -1024,", #1080]") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #120") \
+ TEST_P( "ldr"size" r14, [r",1, 24, "], #128") \
+ TEST_P( "ldr"size" r0, [r",11,24, "], #-120") \
+ TEST_P( "ldr"size" r14, [r",1,24, "], #-128") \
+ TEST_P( "ldr"size" r0, [r",11,24, ", #120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 24, ", #128]!") \
+ TEST_P( "ldr"size" r0, [r",11,256, ", #-120]!") \
+ TEST_P( "ldr"size" r14, [r",1, 256, ", #-128]!") \
+ TEST_PR("ldr"size".w r0, [r",1, 0,", r",2, 4,"]") \
+ TEST_PR("ldr"size" r14, [r",10,0,", r",11,4,", lsl #1]") \
+ TEST_X( "ldr"size".w r0, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL1)) \
+ TEST_X( "ldr"size".w r14, 3f", \
+ ".align 3 \n\t" \
+ "3: .word "__stringify(VAL2)) \
+ TEST( "ldr"size".w r7, 3b") \
+ TEST( "ldr"size".w r7, [sp, #24]") \
+ TEST_P( "ldr"size".w r0, [r",0,0, "]") \
+ TEST_UNSUPPORTED("ldr"size"t r0, [r1, #4]")
+
+ SINGLE_LOAD("b")
+ SINGLE_LOAD("sb")
+ SINGLE_LOAD("h")
+ SINGLE_LOAD("sh")
+ SINGLE_LOAD("")
+
+ TEST_BF_P("ldr pc, [r",14, 15*4,"]")
+ TEST_P( "ldr sp, [r",14, 13*4,"]")
+ TEST_BF_R("ldr pc, [sp, r",14, 15*4,"]")
+ TEST_R( "ldr sp, [sp, r",14, 13*4,"]")
+ TEST_THUMB_TO_ARM_INTERWORK_P("ldr pc, [r",0,0,", #15*4]")
+ TEST_SUPPORTED("ldr sp, 99f")
+ TEST_SUPPORTED("ldr pc, 99f")
+
+ TEST_UNSUPPORTED(".short 0xf854,0x700d @ ldr r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf854,0x700f @ ldr r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700d @ ldrb r7, [r4, sp]")
+ TEST_UNSUPPORTED(".short 0xf814,0x700f @ ldrb r7, [r4, pc]")
+ TEST_UNSUPPORTED(".short 0xf89f,0xd004 @ ldrb sp, 99f")
+ TEST_UNSUPPORTED(".short 0xf814,0xd008 @ ldrb sp, [r4, r8]")
+ TEST_UNSUPPORTED(".short 0xf894,0xd000 @ ldrb sp, [r4]")
+
+ TEST_UNSUPPORTED(".short 0xf860,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf9ff,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf950,0x0000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf95f,0xffff") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf800,0x0800") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xf97f,0xfaff") /* Unallocated space */
+
+ TEST( "pli [pc, #4]")
+ TEST( "pli [pc, #-4]")
+ TEST( "pld [pc, #4]")
+ TEST( "pld [pc, #-4]")
+
+ TEST_P( "pld [r",0,-1024,", #1024]")
+ TEST( ".short 0xf8b0,0xf400 @ pldw [r0, #1024]")
+ TEST_P( "pli [r",4, 0b,", #1024]")
+ TEST_P( "pld [r",7, 120,", #-120]")
+ TEST( ".short 0xf837,0xfc78 @ pldw [r7, #-120]")
+ TEST_P( "pli [r",11,120,", #-120]")
+ TEST( "pld [sp, #0]")
+
+ TEST_PR("pld [r",7, 24, ", r",0, 16,"]")
+ TEST_PR("pld [r",8, 24, ", r",12,16,", lsl #3]")
+ TEST_SUPPORTED(".short 0xf837,0xf000 @ pldw [r7, r0]")
+ TEST_SUPPORTED(".short 0xf838,0xf03c @ pldw [r8, r12, lsl #3]");
+ TEST_RR("pli [r",12,0b,", r",0, 16,"]")
+ TEST_RR("pli [r",0, 0b,", r",12,16,", lsl #3]")
+ TEST_R( "pld [sp, r",1, 16,"]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00d @pld [r7, sp]")
+ TEST_UNSUPPORTED(".short 0xf817,0xf00f @pld [r7, pc]")
+
+ TEST_GROUP("Data-processing (register)")
+
+#define SHIFTS32(op) \
+ TEST_RR(op" r0, r",1, VAL1,", r",2, 3, "") \
+ TEST_RR(op" r14, r",12,VAL2,", r",11,10,"")
+
+ SHIFTS32("lsl")
+ SHIFTS32("lsls")
+ SHIFTS32("lsr")
+ SHIFTS32("lsrs")
+ SHIFTS32("asr")
+ SHIFTS32("asrs")
+ SHIFTS32("ror")
+ SHIFTS32("rors")
+
+ TEST_UNSUPPORTED(".short 0xfa01,0xff02 @ lsl pc, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xfd02 @ lsl sp, r1, r2")
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf002 @ lsl r0, pc, r2")
+ TEST_UNSUPPORTED(".short 0xfa0d,0xf002 @ lsl r0, sp, r2")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00f @ lsl r0, r1, pc")
+ TEST_UNSUPPORTED(".short 0xfa01,0xf00d @ lsl r0, r1, sp")
+
+ TEST_RR( "sxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxth r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa0f,0xff87 @ sxth pc, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xfd87 @ sxth sp, r7");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88f @ sxth r8, pc");
+ TEST_UNSUPPORTED(".short 0xfa0f,0xf88d @ sxth r8, sp");
+
+ TEST_RR( "uxtah r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtah r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxth r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab16 r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab16 r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb16 r8, r",7, HH1,"")
+
+ TEST_RR( "sxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "sxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "sxtb r8, r",7, HH1,"")
+
+ TEST_RR( "uxtab r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "uxtab r14,r",12, HH2,", r",10,HH1,", ror #8")
+ TEST_R( "uxtb r8, r",7, HH1,"")
+
+ TEST_UNSUPPORTED(".short 0xfa60,0x00f0")
+ TEST_UNSUPPORTED(".short 0xfa7f,0xffff")
+
+#define PARALLEL_ADD_SUB(op) \
+ TEST_RR( op"add16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"asx r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"asx r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sax r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sax r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub16 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub16 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"add8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"add8 r14, r",12,HH2,", r",10,HH1,"") \
+ TEST_RR( op"sub8 r0, r",0, HH1,", r",1, HH2,"") \
+ TEST_RR( op"sub8 r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_GROUP("Parallel addition and subtraction, signed")
+
+ PARALLEL_ADD_SUB("s")
+ PARALLEL_ADD_SUB("q")
+ PARALLEL_ADD_SUB("sh")
+
+ TEST_GROUP("Parallel addition and subtraction, unsigned")
+
+ PARALLEL_ADD_SUB("u")
+ PARALLEL_ADD_SUB("uq")
+ PARALLEL_ADD_SUB("uh")
+
+ TEST_GROUP("Miscellaneous operations")
+
+ TEST_RR("qadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qsub lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdadd r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdadd lr, r",9, VAL2,", r",8, VAL1,"")
+ TEST_RR("qdsub r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR("qdsub lr, r",9, VAL2,", r",8, VAL1,"")
+
+ TEST_R("rev.w r0, r",0, VAL1,"")
+ TEST_R("rev r14, r",12, VAL2,"")
+ TEST_R("rev16.w r0, r",0, VAL1,"")
+ TEST_R("rev16 r14, r",12, VAL2,"")
+ TEST_R("rbit r0, r",0, VAL1,"")
+ TEST_R("rbit r14, r",12, VAL2,"")
+ TEST_R("revsh.w r0, r",0, VAL1,"")
+ TEST_R("revsh r14, r",12, VAL2,"")
+
+ TEST_UNSUPPORTED(".short 0xfa9c,0xff8c @ rev pc, r12");
+ TEST_UNSUPPORTED(".short 0xfa9c,0xfd8c @ rev sp, r12");
+ TEST_UNSUPPORTED(".short 0xfa9f,0xfe8f @ rev r14, pc");
+ TEST_UNSUPPORTED(".short 0xfa9d,0xfe8d @ rev r14, sp");
+
+ TEST_RR("sel r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR("sel r14, r",12,VAL1,", r",10, VAL2,"")
+
+ TEST_R("clz r0, r",0, 0x0,"")
+ TEST_R("clz r7, r",14,0x1,"")
+ TEST_R("clz lr, r",7, 0xffffffff,"")
+
+ TEST_UNSUPPORTED(".short 0xfa80,0xf030") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfab0,0xf000") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfaff,0xff7f") /* Unallocated space */
+
+ TEST_GROUP("Multiply, multiply accumulate, and absolute difference operations")
+
+ TEST_RR( "mul r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "mul r7, r",8, VAL2,", r",9, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xff09 @ mul pc, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xfd09 @ mul sp, r8, r9")
+ TEST_UNSUPPORTED(".short 0xfb0f,0xf709 @ mul r7, pc, r9")
+ TEST_UNSUPPORTED(".short 0xfb0d,0xf709 @ mul r7, sp, r9")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70f @ mul r7, r8, pc")
+ TEST_UNSUPPORTED(".short 0xfb08,0xf70d @ mul r7, r8, sp")
+
+ TEST_RRR( "mla r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mla r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_UNSUPPORTED(".short 0xfb08,0xaf09 @ mla pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xad09 @ mla sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0f,0xa709 @ mla r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb0d,0xa709 @ mla r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70f @ mla r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xa70d @ mla r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb08,0xd709 @ mla r7, r8, r9, sp");
+
+ TEST_RRR( "mls r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "mls r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+
+ TEST_RRR( "smlabb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlabt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlabt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlatt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlatt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulbb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulbt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulbt r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smultt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smultt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlad r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlad r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smladx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smladx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smuad r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuad r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smuadx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smuadx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smlawb r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawb r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RRR( "smlawt r0, r",1, VAL1,", r",2, VAL2,", r",3, VAL3,"")
+ TEST_RRR( "smlawt r7, r",8, VAL3,", r",9, VAL1,", r",10, VAL2,"")
+ TEST_RR( "smulwb r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwb r7, r",8, VAL3,", r",9, VAL1,"")
+ TEST_RR( "smulwt r0, r",1, VAL1,", r",2, VAL2,"")
+ TEST_RR( "smulwt r7, r",8, VAL3,", r",9, VAL1,"")
+
+ TEST_RRR( "smlsd r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsd r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RRR( "smlsdx r0, r",0, HH1,", r",1, HH2,", r",2, VAL1,"")
+ TEST_RRR( "smlsdx r14, r",12,HH2,", r",10,HH1,", r",8, VAL2,"")
+ TEST_RR( "smusd r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusd r14, r",12,HH2,", r",10,HH1,"")
+ TEST_RR( "smusdx r0, r",0, HH1,", r",1, HH2,"")
+ TEST_RR( "smusdx r14, r",12,HH2,", r",10,HH1,"")
+
+ TEST_RRR( "smmla r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmla r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlar r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlar r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RR( "smmul r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmul r14, r",12,VAL2,", r",10,VAL1,"")
+ TEST_RR( "smmulr r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "smmulr r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_RRR( "smmls r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmls r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+ TEST_RRR( "smmlsr r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL1,"")
+ TEST_RRR( "smmlsr r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL2,"")
+
+ TEST_RRR( "usada8 r0, r",0, VAL1,", r",1, VAL2,", r",2, VAL3,"")
+ TEST_RRR( "usada8 r14, r",12,VAL2,", r",10,VAL1,", r",8, VAL3,"")
+ TEST_RR( "usad8 r0, r",0, VAL1,", r",1, VAL2,"")
+ TEST_RR( "usad8 r14, r",12,VAL2,", r",10,VAL1,"")
+
+ TEST_UNSUPPORTED(".short 0xfb00,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb0f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0xf010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb70,0x0010") /* Unallocated space */
+ TEST_UNSUPPORTED(".short 0xfb7f,0xff1f") /* Unallocated space */
+
+ TEST_GROUP("Long multiply, long multiply accumulate, and divide")
+
+ TEST_RR( "smull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "smull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+ TEST_UNSUPPORTED(".short 0xfb89,0xf80a @ smull pc, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0xd80a @ smull sp, r8, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7f0a @ smull r7, pc, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x7d0a @ smull r7, sp, r9, r10");
+ TEST_UNSUPPORTED(".short 0xfb8f,0x780a @ smull r7, r8, pc, r10");
+ TEST_UNSUPPORTED(".short 0xfb8d,0x780a @ smull r7, r8, sp, r10");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780f @ smull r7, r8, r9, pc");
+ TEST_UNSUPPORTED(".short 0xfb89,0x780d @ smull r7, r8, r9, sp");
+
+ TEST_RR( "umull r0, r1, r",2, VAL1,", r",3, VAL2,"")
+ TEST_RR( "umull r7, r8, r",9, VAL2,", r",10, VAL1,"")
+
+ TEST_RRRR( "smlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlalbb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlalbt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlalbt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltb r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltb r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "smlaltt r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "smlaltt r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_RRRR( "smlald r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlald r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlaldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlaldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "smlsld r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsld r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+ TEST_RRRR( "smlsldx r",0, VAL1,", r",1, VAL2, ", r",0, HH1,", r",1, HH2)
+ TEST_RRRR( "smlsldx r",11,VAL2,", r",10,VAL1, ", r",9, HH2,", r",8, HH1)
+
+ TEST_RRRR( "umlal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umlal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+ TEST_RRRR( "umaal r",0, VAL1,", r",1, VAL2,", r",2, VAL3,", r",3, VAL4)
+ TEST_RRRR( "umaal r",8, VAL4,", r",9, VAL1,", r",10,VAL2,", r",11,VAL3)
+
+ TEST_GROUP("Coprocessor instructions")
+
+ TEST_UNSUPPORTED(".short 0xfc00,0x0000")
+ TEST_UNSUPPORTED(".short 0xffff,0xffff")
+
+ TEST_GROUP("Testing instructions in IT blocks")
+
+ TEST_ITBLOCK("sub.w r0, r0")
+
+ verbose("\n");
+}
+
diff --git a/arch/arm/kernel/kprobes-test.c b/arch/arm/kernel/kprobes-test.c
new file mode 100644
index 0000000..e17cdd6
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.c
@@ -0,0 +1,1748 @@
+/*
+ * arch/arm/kernel/kprobes-test.c
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * This file contains test code for ARM kprobes.
+ *
+ * The top level function run_all_tests() executes tests for all of the
+ * supported instruction sets: ARM, 16-bit Thumb, and 32-bit Thumb. These tests
+ * fall into two categories; run_api_tests() checks basic functionality of the
+ * kprobes API, and run_test_cases() is a comprehensive test for kprobes
+ * instruction decoding and simulation.
+ *
+ * run_test_cases() first checks the kprobes decoding table for self consistency
+ * (using table_test()) then executes a series of test cases for each of the CPU
+ * instruction forms. coverage_start() and coverage_end() are used to verify
+ * that these test cases cover all of the possible combinations of instructions
+ * described by the kprobes decoding tables.
+ *
+ * The individual test cases are in kprobes-test-arm.c and kprobes-test-thumb.c
+ * which use the macros defined in kprobes-test.h. The rest of this
+ * documentation will describe the operation of the framework used by these
+ * test cases.
+ */
+
+/*
+ * TESTING METHODOLOGY
+ * -------------------
+ *
+ * The methodology used to test an ARM instruction 'test_insn' is to use
+ * inline assembler like:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ *
+ * When the test case is run a kprobe is placed of each nop. The
+ * post-handler of the test_before probe is used to modify the saved CPU
+ * register context to that which we require for the test case. The
+ * pre-handler of the of the test_after probe saves a copy of the CPU
+ * register context. In this way we can execute test_insn with a specific
+ * register context and see the results afterwards.
+ *
+ * To actually test the kprobes instruction emulation we perform the above
+ * step a second time but with an additional kprobe on the test_case
+ * instruction itself. If the emulation is accurate then the results seen
+ * by the test_after probe will be identical to the first run which didn't
+ * have a probe on test_case.
+ *
+ * Each test case is run several times with a variety of variations in the
+ * flags value of stored in CPSR, and for Thumb code, different ITState.
+ *
+ * For instructions which can modify PC, a second test_after probe is used
+ * like this:
+ *
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * b test_done
+ * test_after2: nop
+ * test_done:
+ *
+ * The test case is constructed such that test_insn branches to
+ * test_after2, or, if testing a conditional instruction, it may just
+ * continue to test_after. The probes inserted at both locations let us
+ * determine which happened. A similar approach is used for testing
+ * backwards branches...
+ *
+ * b test_before
+ * b test_done @ helps to cope with off by 1 branches
+ * test_after2: nop
+ * b test_done
+ * test_before: nop
+ * test_case: test_insn
+ * test_after: nop
+ * test_done:
+ *
+ * The macros used to generate the assembler instructions describe above
+ * are TEST_INSTRUCTION, TEST_BRANCH_F (branch forwards) and TEST_BRANCH_B
+ * (branch backwards). In these, the local variables numbered 1, 50, 2 and
+ * 99 represent: test_before, test_case, test_after2 and test_done.
+ *
+ * FRAMEWORK
+ * ---------
+ *
+ * Each test case is wrapped between the pair of macros TESTCASE_START and
+ * TESTCASE_END. As well as performing the inline assembler boilerplate,
+ * these call out to the kprobes_test_case_start() and
+ * kprobes_test_case_end() functions which drive the execution of the test
+ * case. The specific arguments to use for each test case are stored as
+ * inline data constructed using the various TEST_ARG_* macros. Putting
+ * this all together, a simple test case may look like:
+ *
+ * TESTCASE_START("Testing mov r0, r7")
+ * TEST_ARG_REG(7, 0x12345678) // Set r7=0x12345678
+ * TEST_ARG_END("")
+ * TEST_INSTRUCTION("mov r0, r7")
+ * TESTCASE_END
+ *
+ * Note, in practice the single convenience macro TEST_R would be used for this
+ * instead.
+ *
+ * The above would expand to assembler looking something like:
+ *
+ * @ TESTCASE_START
+ * bl __kprobes_test_case_start
+ * @ start of inline data...
+ * .ascii "mov r0, r7" @ text title for test case
+ * .byte 0
+ * .align 2
+ *
+ * @ TEST_ARG_REG
+ * .byte ARG_TYPE_REG
+ * .byte 7
+ * .short 0
+ * .word 0x1234567
+ *
+ * @ TEST_ARG_END
+ * .byte ARG_TYPE_END
+ * .byte TEST_ISA @ flags, including ISA being tested
+ * .short 50f-0f @ offset of 'test_before'
+ * .short 2f-0f @ offset of 'test_after2' (if relevent)
+ * .short 99f-0f @ offset of 'test_done'
+ * @ start of test case code...
+ * 0:
+ * .code TEST_ISA @ switch to ISA being tested
+ *
+ * @ TEST_INSTRUCTION
+ * 50: nop @ location for 'test_before' probe
+ * 1: mov r0, r7 @ the test case instruction 'test_insn'
+ * nop @ location for 'test_after' probe
+ *
+ * // TESTCASE_END
+ * 2:
+ * 99: bl __kprobes_test_case_end_##TEST_ISA
+ * .code NONMAL_ISA
+ *
+ * When the above is execute the following happens...
+ *
+ * __kprobes_test_case_start() is an assembler wrapper which sets up space
+ * for a stack buffer and calls the C function kprobes_test_case_start().
+ * This C function will do some initial processing of the inline data and
+ * setup some global state. It then inserts the test_before and test_after
+ * kprobes and returns a value which causes the assembler wrapper to jump
+ * to the start of the test case code, (local label '0').
+ *
+ * When the test case code executes, the test_before probe will be hit and
+ * test_before_post_handler will call setup_test_context(). This fills the
+ * stack buffer and CPU registers with a test pattern and then processes
+ * the test case arguments. In our example there is one TEST_ARG_REG which
+ * indicates that R7 should be loaded with the value 0x12345678.
+ *
+ * When the test_before probe ends, the test case continues and executes
+ * the "mov r0, r7" instruction. It then hits the test_after probe and the
+ * pre-handler for this (test_after_pre_handler) will save a copy of the
+ * CPU register context. This should now have R0 holding the same value as
+ * R7.
+ *
+ * Finally we get to the call to __kprobes_test_case_end_{32,16}. This is
+ * an assembler wrapper which switches back to the ISA used by the test
+ * code and calls the C function kprobes_test_case_end().
+ *
+ * For each run through the test case, test_case_run_count is incremented
+ * by one. For even runs, kprobes_test_case_end() saves a copy of the
+ * register and stack buffer contents from the test case just run. It then
+ * inserts a kprobe on the test case instruction 'test_insn' and returns a
+ * value to cause the test case code to be re-run.
+ *
+ * For odd numbered runs, kprobes_test_case_end() compares the register and
+ * stack buffer contents to those that were saved on the previous even
+ * numbered run (the one without the kprobe on test_insn). These should be
+ * the same if the kprobe instruction simulation routine is correct.
+ *
+ * The pair of test case runs is repeated with different combinations of
+ * flag values in CPSR and, for Thumb, different ITState. This is
+ * controlled by test_context_cpsr().
+ *
+ * BUILDING TEST CASES
+ * -------------------
+ *
+ *
+ * As an aid to building test cases, the stack buffer is initialised with
+ * some special values:
+ *
+ * [SP+13*4] Contains SP+120. This can be used to test instructions
+ * which load a value into SP.
+ *
+ * [SP+15*4] When testing branching instructions using TEST_BRANCH_{F,B},
+ * this holds the target address of the branch, 'test_after2'.
+ * This can be used to test instructions which load a PC value
+ * from memory.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/kprobes.h>
+
+#include "kprobes.h"
+#include "kprobes-test.h"
+
+
+#define BENCHMARKING 1
+
+
+/*
+ * Test basic API
+ */
+
+static bool test_regs_ok;
+static int test_func_instance;
+static int pre_handler_called;
+static int post_handler_called;
+static int jprobe_func_called;
+static int kretprobe_handler_called;
+
+#define FUNC_ARG1 0x12345678
+#define FUNC_ARG2 0xabcdef
+
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+long arm_func(long r0, long r1);
+
+static void __used __naked __arm_kprobes_test_func(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ ".type arm_func, %%function \n\t"
+ "arm_func: \n\t"
+ "adds r0, r0, r1 \n\t"
+ "bx lr \n\t"
+ ".code "NORMAL_ISA /* Back to Thumb if necessary */
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+long thumb16_func(long r0, long r1);
+long thumb32even_func(long r0, long r1);
+long thumb32odd_func(long r0, long r1);
+
+static void __used __naked __thumb_kprobes_test_funcs(void)
+{
+ __asm__ __volatile__ (
+ ".type thumb16_func, %%function \n\t"
+ "thumb16_func: \n\t"
+ "adds.n r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ ".type thumb32even_func, %%function \n\t"
+ "thumb32even_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ ".align \n\t"
+ "nop.n \n\t"
+ ".type thumb32odd_func, %%function \n\t"
+ "thumb32odd_func: \n\t"
+ "adds.w r0, r0, r1 \n\t"
+ "bx lr \n\t"
+
+ : : : "r0", "r1", "cc"
+ );
+}
+
+#endif /* CONFIG_THUMB2_KERNEL */
+
+
+static int call_test_func(long (*func)(long, long), bool check_test_regs)
+{
+ long ret;
+
+ ++test_func_instance;
+ test_regs_ok = false;
+
+ ret = (*func)(FUNC_ARG1, FUNC_ARG2);
+ if (ret != FUNC_ARG1 + FUNC_ARG2) {
+ pr_err("FAIL: call_test_func: func returned %lx\n", ret);
+ return false;
+ }
+
+ if (check_test_regs && !test_regs_ok) {
+ pr_err("FAIL: test regs not OK\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int __kprobes pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ pre_handler_called = test_func_instance;
+ if (regs->ARM_r0 == FUNC_ARG1 && regs->ARM_r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static void __kprobes post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ post_handler_called = test_func_instance;
+ if (regs->ARM_r0 != FUNC_ARG1 + FUNC_ARG2 || regs->ARM_r1 != FUNC_ARG2)
+ test_regs_ok = false;
+}
+
+static struct kprobe the_kprobe = {
+ .addr = 0,
+ .pre_handler = pre_handler,
+ .post_handler = post_handler
+};
+
+static int test_kprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kprobe.addr = (kprobe_opcode_t *)func;
+ ret = register_kprobe(&the_kprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kprobe(&the_kprobe);
+ the_kprobe.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (pre_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe pre_handler not called\n");
+ return -EINVAL;
+ }
+ if (post_handler_called != test_func_instance) {
+ pr_err("FAIL: kprobe post_handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (pre_handler_called == test_func_instance ||
+ post_handler_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void __kprobes jprobe_func(long r0, long r1)
+{
+ jprobe_func_called = test_func_instance;
+ if (r0 == FUNC_ARG1 && r1 == FUNC_ARG2)
+ test_regs_ok = true;
+ jprobe_return();
+}
+
+static struct jprobe the_jprobe = {
+ .entry = jprobe_func,
+};
+
+static int test_jprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_jprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_jprobe(&the_jprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_jprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_jprobe(&the_jprobe);
+ the_jprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (jprobe_func_called != test_func_instance) {
+ pr_err("FAIL: jprobe handler function not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: probe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int __kprobes
+kretprobe_handler(struct kretprobe_instance *ri, struct pt_regs *regs)
+{
+ kretprobe_handler_called = test_func_instance;
+ if (regs_return_value(regs) == FUNC_ARG1 + FUNC_ARG2)
+ test_regs_ok = true;
+ return 0;
+}
+
+static struct kretprobe the_kretprobe = {
+ .handler = kretprobe_handler,
+};
+
+static int test_kretprobe(long (*func)(long, long))
+{
+ int ret;
+
+ the_kretprobe.kp.addr = (kprobe_opcode_t *)func;
+ ret = register_kretprobe(&the_kretprobe);
+ if (ret < 0) {
+ pr_err("FAIL: register_kretprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = call_test_func(func, true);
+
+ unregister_kretprobe(&the_kretprobe);
+ the_kretprobe.kp.flags = 0; /* Clear disable flag to allow reuse */
+
+ if (!ret)
+ return -EINVAL;
+ if (kretprobe_handler_called != test_func_instance) {
+ pr_err("FAIL: kretprobe handler not called\n");
+ return -EINVAL;
+ }
+ if (!call_test_func(func, false))
+ return -EINVAL;
+ if (jprobe_func_called == test_func_instance) {
+ pr_err("FAIL: kretprobe called after unregistering\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int run_api_tests(long (*func)(long, long))
+{
+ int ret;
+
+ pr_info(" kprobe\n");
+ ret = test_kprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" jprobe\n");
+ ret = test_jprobe(func);
+ if (ret < 0)
+ return ret;
+
+ pr_info(" kretprobe\n");
+ ret = test_kretprobe(func);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+
+/*
+ * Benchmarking
+ */
+
+#if BENCHMARKING
+
+static void __naked benchmark_nop(void)
+{
+ __asm__ __volatile__ (
+ "nop \n\t"
+ "bx lr"
+ );
+}
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define wide ".w"
+#else
+#define wide
+#endif
+
+static void __naked benchmark_pushpop1(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r3-r11,lr} \n\t"
+ "ldmia"wide" sp!, {r3-r11,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop2(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0-r8,lr} \n\t"
+ "ldmia"wide" sp!, {r0-r8,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop3(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r4,lr} \n\t"
+ "ldmia"wide" sp!, {r4,pc}"
+ );
+}
+
+static void __naked benchmark_pushpop4(void)
+{
+ __asm__ __volatile__ (
+ "stmdb"wide" sp!, {r0,lr} \n\t"
+ "ldmia"wide" sp!, {r0,pc}"
+ );
+}
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+
+static void __naked benchmark_pushpop_thumb(void)
+{
+ __asm__ __volatile__ (
+ "push.n {r0-r7,lr} \n\t"
+ "pop.n {r0-r7,pc}"
+ );
+}
+
+#endif
+
+static int __kprobes
+benchmark_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ return 0;
+}
+
+static int benchmark(void(*fn)(void))
+{
+ unsigned n, i, t, t0;
+
+ for (n = 1000; ; n *= 2) {
+ t0 = sched_clock();
+ for (i = n; i > 0; --i)
+ fn();
+ t = sched_clock() - t0;
+ if (t >= 250000000)
+ break; /* Stop once we took more than 0.25 seconds */
+ }
+ return t / n; /* Time for one iteration in nanoseconds */
+};
+
+static int kprobe_benchmark(void(*fn)(void), unsigned offset)
+{
+ struct kprobe k = {
+ .addr = (kprobe_opcode_t *)((uintptr_t)fn + offset),
+ .pre_handler = benchmark_pre_handler,
+ };
+
+ int ret = register_kprobe(&k);
+ if (ret < 0) {
+ pr_err("FAIL: register_kprobe failed with %d\n", ret);
+ return ret;
+ }
+
+ ret = benchmark(fn);
+
+ unregister_kprobe(&k);
+ return ret;
+};
+
+struct benchmarks {
+ void (*fn)(void);
+ unsigned offset;
+ const char *title;
+};
+
+static int run_benchmarks(void)
+{
+ int ret;
+ struct benchmarks list[] = {
+ {&benchmark_nop, 0, "nop"},
+ /*
+ * benchmark_pushpop{1,3} will have the optimised
+ * instruction emulation, whilst benchmark_pushpop{2,4} will
+ * be the equivalent unoptimised instructions.
+ */
+ {&benchmark_pushpop1, 0, "stmdb sp!, {r3-r11,lr}"},
+ {&benchmark_pushpop1, 4, "ldmia sp!, {r3-r11,pc}"},
+ {&benchmark_pushpop2, 0, "stmdb sp!, {r0-r8,lr}"},
+ {&benchmark_pushpop2, 4, "ldmia sp!, {r0-r8,pc}"},
+ {&benchmark_pushpop3, 0, "stmdb sp!, {r4,lr}"},
+ {&benchmark_pushpop3, 4, "ldmia sp!, {r4,pc}"},
+ {&benchmark_pushpop4, 0, "stmdb sp!, {r0,lr}"},
+ {&benchmark_pushpop4, 4, "ldmia sp!, {r0,pc}"},
+#ifdef CONFIG_THUMB2_KERNEL
+ {&benchmark_pushpop_thumb, 0, "push.n {r0-r7,lr}"},
+ {&benchmark_pushpop_thumb, 2, "pop.n {r0-r7,pc}"},
+#endif
+ {0}
+ };
+
+ struct benchmarks *b;
+ for (b = list; b->fn; ++b) {
+ ret = kprobe_benchmark(b->fn, b->offset);
+ if (ret < 0)
+ return ret;
+ pr_info(" %dns for kprobe %s\n", ret, b->title);
+ }
+
+ pr_info("\n");
+ return 0;
+}
+
+#endif /* BENCHMARKING */
+
+
+/*
+ * Decoding table self-consistency tests
+ */
+
+static const int decode_struct_sizes[NUM_DECODE_TYPES] = {
+ [DECODE_TYPE_TABLE] = sizeof(struct decode_table),
+ [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom),
+ [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate),
+ [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate),
+ [DECODE_TYPE_OR] = sizeof(struct decode_or),
+ [DECODE_TYPE_REJECT] = sizeof(struct decode_reject)
+};
+
+static int table_iter(const union decode_item *table,
+ int (*fn)(const struct decode_header *, void *),
+ void *args)
+{
+ const struct decode_header *h = (struct decode_header *)table;
+ int result;
+
+ for (;;) {
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (type == DECODE_TYPE_END)
+ return 0;
+
+ result = fn(h, args);
+ if (result)
+ return result;
+
+ h = (struct decode_header *)
+ ((uintptr_t)h + decode_struct_sizes[type]);
+
+ }
+}
+
+static int table_test_fail(const struct decode_header *h, const char* message)
+{
+
+ pr_err("FAIL: kprobes test failure \"%s\" (mask %08x, value %08x)\n",
+ message, h->mask.bits, h->value.bits);
+ return -EINVAL;
+}
+
+struct table_test_args {
+ const union decode_item *root_table;
+ u32 parent_mask;
+ u32 parent_value;
+};
+
+static int table_test_fn(const struct decode_header *h, void *args)
+{
+ struct table_test_args *a = (struct table_test_args *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (h->value.bits & ~h->mask.bits)
+ return table_test_fail(h, "Match value has bits not in mask");
+
+ if ((h->mask.bits & a->parent_mask) != a->parent_mask)
+ return table_test_fail(h, "Mask has bits not in parent mask");
+
+ if ((h->value.bits ^ a->parent_value) & a->parent_mask)
+ return table_test_fail(h, "Value is inconsistent with parent");
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ struct table_test_args args2 = *a;
+ args2.parent_mask = h->mask.bits;
+ args2.parent_value = h->value.bits;
+ return table_iter(d->table.table, table_test_fn, &args2);
+ }
+
+ return 0;
+}
+
+static int table_test(const union decode_item *table)
+{
+ struct table_test_args args = {
+ .root_table = table,
+ .parent_mask = 0,
+ .parent_value = 0
+ };
+ return table_iter(args.root_table, table_test_fn, &args);
+}
+
+
+/*
+ * Decoding table test coverage analysis
+ *
+ * coverage_start() builds a coverage_table which contains a list of
+ * coverage_entry's to match each entry in the specified kprobes instruction
+ * decoding table.
+ *
+ * When test cases are run, coverage_add() is called to process each case.
+ * This looks up the corresponding entry in the coverage_table and sets it as
+ * being matched, as well as clearing the regs flag appropriate for the test.
+ *
+ * After all test cases have been run, coverage_end() is called to check that
+ * all entries in coverage_table have been matched and that all regs flags are
+ * cleared. I.e. that all possible combinations of instructions described by
+ * the kprobes decoding tables have had a test case executed for them.
+ */
+
+bool coverage_fail;
+
+#define MAX_COVERAGE_ENTRIES 256
+
+struct coverage_entry {
+ const struct decode_header *header;
+ unsigned regs;
+ unsigned nesting;
+ char matched;
+};
+
+struct coverage_table {
+ struct coverage_entry *base;
+ unsigned num_entries;
+ unsigned nesting;
+};
+
+struct coverage_table coverage;
+
+#define COVERAGE_ANY_REG (1<<0)
+#define COVERAGE_SP (1<<1)
+#define COVERAGE_PC (1<<2)
+#define COVERAGE_PCWB (1<<3)
+
+static const char coverage_register_lookup[16] = {
+ [REG_TYPE_ANY] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_SAMEAS16] = COVERAGE_ANY_REG,
+ [REG_TYPE_SP] = COVERAGE_SP,
+ [REG_TYPE_PC] = COVERAGE_PC,
+ [REG_TYPE_NOSP] = COVERAGE_ANY_REG | COVERAGE_SP,
+ [REG_TYPE_NOSPPC] = COVERAGE_ANY_REG | COVERAGE_SP | COVERAGE_PC,
+ [REG_TYPE_NOPC] = COVERAGE_ANY_REG | COVERAGE_PC,
+ [REG_TYPE_NOPCWB] = COVERAGE_ANY_REG | COVERAGE_PC | COVERAGE_PCWB,
+ [REG_TYPE_NOPCX] = COVERAGE_ANY_REG,
+ [REG_TYPE_NOSPPCX] = COVERAGE_ANY_REG | COVERAGE_SP,
+};
+
+unsigned coverage_start_registers(const struct decode_header *h)
+{
+ unsigned regs = 0;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ int r = (h->type_regs.bits >> (DECODE_TYPE_BITS + i)) & 0xf;
+ regs |= coverage_register_lookup[r] << i;
+ }
+ return regs;
+}
+
+static int coverage_start_fn(const struct decode_header *h, void *args)
+{
+ struct coverage_table *coverage = (struct coverage_table *)args;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+ struct coverage_entry *entry = coverage->base + coverage->num_entries;
+
+ if (coverage->num_entries == MAX_COVERAGE_ENTRIES - 1) {
+ pr_err("FAIL: Out of space for test coverage data");
+ return -ENOMEM;
+ }
+
+ ++coverage->num_entries;
+
+ entry->header = h;
+ entry->regs = coverage_start_registers(h);
+ entry->nesting = coverage->nesting;
+ entry->matched = false;
+
+ if (type == DECODE_TYPE_TABLE) {
+ struct decode_table *d = (struct decode_table *)h;
+ int ret;
+ ++coverage->nesting;
+ ret = table_iter(d->table.table, coverage_start_fn, coverage);
+ --coverage->nesting;
+ return ret;
+ }
+
+ return 0;
+}
+
+static int coverage_start(const union decode_item *table)
+{
+ coverage.base = kmalloc(MAX_COVERAGE_ENTRIES *
+ sizeof(struct coverage_entry), GFP_KERNEL);
+ coverage.num_entries = 0;
+ coverage.nesting = 0;
+ return table_iter(table, coverage_start_fn, &coverage);
+}
+
+static void
+coverage_add_registers(struct coverage_entry *entry, kprobe_opcode_t insn)
+{
+ int regs = entry->header->type_regs.bits >> DECODE_TYPE_BITS;
+ int i;
+ for (i = 0; i < 20; i += 4) {
+ enum decode_reg_type reg_type = (regs >> i) & 0xf;
+ int reg = (insn >> i) & 0xf;
+ int flag;
+
+ if (!reg_type)
+ continue;
+
+ if (reg == 13)
+ flag = COVERAGE_SP;
+ else if (reg == 15)
+ flag = COVERAGE_PC;
+ else
+ flag = COVERAGE_ANY_REG;
+ entry->regs &= ~(flag << i);
+
+ switch (reg_type) {
+
+ case REG_TYPE_NONE:
+ case REG_TYPE_ANY:
+ case REG_TYPE_SAMEAS16:
+ break;
+
+ case REG_TYPE_SP:
+ if (reg != 13)
+ return;
+ break;
+
+ case REG_TYPE_PC:
+ if (reg != 15)
+ return;
+ break;
+
+ case REG_TYPE_NOSP:
+ if (reg == 13)
+ return;
+ break;
+
+ case REG_TYPE_NOSPPC:
+ case REG_TYPE_NOSPPCX:
+ if (reg == 13 || reg == 15)
+ return;
+ break;
+
+ case REG_TYPE_NOPCWB:
+ if (!is_writeback(insn))
+ break;
+ if (reg == 15) {
+ entry->regs &= ~(COVERAGE_PCWB << i);
+ return;
+ }
+ break;
+
+ case REG_TYPE_NOPC:
+ case REG_TYPE_NOPCX:
+ if (reg == 15)
+ return;
+ break;
+ }
+
+ }
+}
+
+static void coverage_add(kprobe_opcode_t insn)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+ bool matched = false;
+ unsigned nesting = 0;
+
+ for (; entry < end; ++entry) {
+ const struct decode_header *h = entry->header;
+ enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK;
+
+ if (entry->nesting > nesting)
+ continue; /* Skip sub-table we didn't match */
+
+ if (entry->nesting < nesting)
+ break; /* End of sub-table we were scanning */
+
+ if (!matched) {
+ if ((insn & h->mask.bits) != h->value.bits)
+ continue;
+ entry->matched = true;
+ }
+
+ switch (type) {
+
+ case DECODE_TYPE_TABLE:
+ ++nesting;
+ break;
+
+ case DECODE_TYPE_CUSTOM:
+ case DECODE_TYPE_SIMULATE:
+ case DECODE_TYPE_EMULATE:
+ coverage_add_registers(entry, insn);
+ return;
+
+ case DECODE_TYPE_OR:
+ matched = true;
+ break;
+
+ case DECODE_TYPE_REJECT:
+ default:
+ return;
+ }
+
+ }
+}
+
+static void coverage_end(void)
+{
+ struct coverage_entry *entry = coverage.base;
+ struct coverage_entry *end = coverage.base + coverage.num_entries;
+
+ for (; entry < end; ++entry) {
+ u32 mask = entry->header->mask.bits;
+ u32 value = entry->header->value.bits;
+
+ if (entry->regs) {
+ pr_err("FAIL: Register test coverage missing for %08x %08x (%05x)\n",
+ mask, value, entry->regs);
+ coverage_fail = true;
+ }
+ if (!entry->matched) {
+ pr_err("FAIL: Test coverage entry missing for %08x %08x\n",
+ mask, value);
+ coverage_fail = true;
+ }
+ }
+
+ kfree(coverage.base);
+}
+
+
+/*
+ * Framework for instruction set test cases
+ */
+
+void __naked __kprobes_test_case_start(void)
+{
+ __asm__ __volatile__ (
+ "stmdb sp!, {r4-r11} \n\t"
+ "sub sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "bic r0, lr, #1 @ r0 = inline title string \n\t"
+ "mov r1, sp \n\t"
+ "bl kprobes_test_case_start \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "movne pc, r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "mov pc, r0 \n\t"
+ );
+}
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+void __naked __kprobes_test_case_end_16(void)
+{
+ __asm__ __volatile__ (
+ "mov r4, lr \n\t"
+ "bl kprobes_test_case_end \n\t"
+ "cmp r0, #0 \n\t"
+ "bxne r0 \n\t"
+ "mov r0, r4 \n\t"
+ "add sp, sp, #"__stringify(TEST_MEMORY_SIZE)"\n\t"
+ "ldmia sp!, {r4-r11} \n\t"
+ "bx r0 \n\t"
+ );
+}
+
+void __naked __kprobes_test_case_end_32(void)
+{
+ __asm__ __volatile__ (
+ ".arm \n\t"
+ "orr lr, lr, #1 @ will return to Thumb code \n\t"
+ "ldr pc, 1f \n\t"
+ "1: \n\t"
+ ".word __kprobes_test_case_end_16 \n\t"
+ );
+}
+
+#endif
+
+
+int kprobe_test_flags;
+int kprobe_test_cc_position;
+
+static int test_try_count;
+static int test_pass_count;
+static int test_fail_count;
+
+static struct pt_regs initial_regs;
+static struct pt_regs expected_regs;
+static struct pt_regs result_regs;
+
+static u32 expected_memory[TEST_MEMORY_SIZE/sizeof(u32)];
+
+static const char *current_title;
+static struct test_arg *current_args;
+static u32 *current_stack;
+static uintptr_t current_branch_target;
+
+static uintptr_t current_code_start;
+static kprobe_opcode_t current_instruction;
+
+
+#define TEST_CASE_PASSED -1
+#define TEST_CASE_FAILED -2
+
+static int test_case_run_count;
+static bool test_case_is_thumb;
+static int test_instance;
+
+/*
+ * We ignore the state of the imprecise abort disable flag (CPSR.A) because this
+ * can change randomly as the kernel doesn't take care to preserve or initialise
+ * this across context switches. Also, with Security Extentions, the flag may
+ * not be under control of the kernel; for this reason we ignore the state of
+ * the FIQ disable flag CPSR.F as well.
+ */
+#define PSR_IGNORE_BITS (PSR_A_BIT | PSR_F_BIT)
+
+static unsigned long test_check_cc(int cc, unsigned long cpsr)
+{
+ unsigned long temp;
+
+ switch (cc) {
+ case 0x0: /* eq */
+ return cpsr & PSR_Z_BIT;
+
+ case 0x1: /* ne */
+ return (~cpsr) & PSR_Z_BIT;
+
+ case 0x2: /* cs */
+ return cpsr & PSR_C_BIT;
+
+ case 0x3: /* cc */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0x4: /* mi */
+ return cpsr & PSR_N_BIT;
+
+ case 0x5: /* pl */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0x6: /* vs */
+ return cpsr & PSR_V_BIT;
+
+ case 0x7: /* vc */
+ return (~cpsr) & PSR_V_BIT;
+
+ case 0x8: /* hi */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return cpsr & PSR_C_BIT;
+
+ case 0x9: /* ls */
+ cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */
+ return (~cpsr) & PSR_C_BIT;
+
+ case 0xa: /* ge */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return (~cpsr) & PSR_N_BIT;
+
+ case 0xb: /* lt */
+ cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ return cpsr & PSR_N_BIT;
+
+ case 0xc: /* gt */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return (~temp) & PSR_N_BIT;
+
+ case 0xd: /* le */
+ temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */
+ temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */
+ return temp & PSR_N_BIT;
+
+ case 0xe: /* al */
+ case 0xf: /* unconditional */
+ return true;
+ }
+ BUG();
+ return false;
+}
+
+static int is_last_scenario;
+static int probe_should_run; /* 0 = no, 1 = yes, -1 = unknown */
+static int memory_needs_checking;
+
+static unsigned long test_context_cpsr(int scenario)
+{
+ unsigned long cpsr;
+
+ probe_should_run = 1;
+
+ /* Default case is that we cycle through 16 combinations of flags */
+ cpsr = (scenario & 0xf) << 28; /* N,Z,C,V flags */
+ cpsr |= (scenario & 0xf) << 16; /* GE flags */
+ cpsr |= (scenario & 0x1) << 27; /* Toggle Q flag */
+
+ if (!test_case_is_thumb) {
+ /* Testing ARM code */
+ probe_should_run = test_check_cc(current_instruction >> 28, cpsr) != 0;
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_NO_ITBLOCK) {
+ /* Testing Thumb code without setting ITSTATE */
+ if (kprobe_test_cc_position) {
+ int cc = (current_instruction >> kprobe_test_cc_position) & 0xf;
+ probe_should_run = test_check_cc(cc, cpsr) != 0;
+ }
+
+ if (scenario == 15)
+ is_last_scenario = true;
+
+ } else if (kprobe_test_flags & TEST_FLAG_FULL_ITBLOCK) {
+ /* Testing Thumb code with all combinations of ITSTATE */
+ unsigned x = (scenario >> 4);
+ unsigned cond_base = x % 7; /* ITSTATE<7:5> */
+ unsigned mask = x / 7 + 2; /* ITSTATE<4:0>, bits reversed */
+
+ if (mask > 0x1f) {
+ /* Finish by testing state from instruction 'itt al' */
+ cond_base = 7;
+ mask = 0x4;
+ if ((scenario & 0xf) == 0xf)
+ is_last_scenario = true;
+ }
+
+ cpsr |= cond_base << 13; /* ITSTATE<7:5> */
+ cpsr |= (mask & 0x1) << 12; /* ITSTATE<4> */
+ cpsr |= (mask & 0x2) << 10; /* ITSTATE<3> */
+ cpsr |= (mask & 0x4) << 8; /* ITSTATE<2> */
+ cpsr |= (mask & 0x8) << 23; /* ITSTATE<1> */
+ cpsr |= (mask & 0x10) << 21; /* ITSTATE<0> */
+
+ probe_should_run = test_check_cc((cpsr >> 12) & 0xf, cpsr) != 0;
+
+ } else {
+ /* Testing Thumb code with several combinations of ITSTATE */
+ switch (scenario) {
+ case 16: /* Clear NZCV flags and 'it eq' state (false as Z=0) */
+ cpsr = 0x00000800;
+ probe_should_run = 0;
+ break;
+ case 17: /* Set NZCV flags and 'it vc' state (false as V=1) */
+ cpsr = 0xf0007800;
+ probe_should_run = 0;
+ break;
+ case 18: /* Clear NZCV flags and 'it ls' state (true as C=0) */
+ cpsr = 0x00009800;
+ break;
+ case 19: /* Set NZCV flags and 'it cs' state (true as C=1) */
+ cpsr = 0xf0002800;
+ is_last_scenario = true;
+ break;
+ }
+ }
+
+ return cpsr;
+}
+
+static void setup_test_context(struct pt_regs *regs)
+{
+ int scenario = test_case_run_count>>1;
+ unsigned long val;
+ struct test_arg *args;
+ int i;
+
+ is_last_scenario = false;
+ memory_needs_checking = false;
+
+ /* Initialise test memory on stack */
+ val = (scenario & 1) ? VALM : ~VALM;
+ for (i = 0; i < TEST_MEMORY_SIZE / sizeof(current_stack[0]); ++i)
+ current_stack[i] = val + (i << 8);
+ /* Put target of branch on stack for tests which load PC from memory */
+ if (current_branch_target)
+ current_stack[15] = current_branch_target;
+ /* Put a value for SP on stack for tests which load SP from memory */
+ current_stack[13] = (u32)current_stack + 120;
+
+ /* Initialise register values to their default state */
+ val = (scenario & 2) ? VALR : ~VALR;
+ for (i = 0; i < 13; ++i)
+ regs->uregs[i] = val ^ (i << 8);
+ regs->ARM_lr = val ^ (14 << 8);
+ regs->ARM_cpsr &= ~(APSR_MASK | PSR_IT_MASK);
+ regs->ARM_cpsr |= test_context_cpsr(scenario);
+
+ /* Perform testcase specific register setup */
+ args = current_args;
+ for (; args[0].type != ARG_TYPE_END; ++args)
+ switch (args[0].type) {
+ case ARG_TYPE_REG: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] = arg->val;
+ break;
+ }
+ case ARG_TYPE_PTR: {
+ struct test_arg_regptr *arg =
+ (struct test_arg_regptr *)args;
+ regs->uregs[arg->reg] =
+ (unsigned long)current_stack + arg->val;
+ memory_needs_checking = true;
+ break;
+ }
+ case ARG_TYPE_MEM: {
+ struct test_arg_mem *arg = (struct test_arg_mem *)args;
+ current_stack[arg->index] = arg->val;
+ break;
+ }
+ default:
+ break;
+ }
+}
+
+struct test_probe {
+ struct kprobe kprobe;
+ bool registered;
+ int hit;
+};
+
+static void unregister_test_probe(struct test_probe *probe)
+{
+ if (probe->registered) {
+ unregister_kprobe(&probe->kprobe);
+ probe->kprobe.flags = 0; /* Clear disable flag to allow reuse */
+ }
+ probe->registered = false;
+}
+
+static int register_test_probe(struct test_probe *probe)
+{
+ int ret;
+
+ if (probe->registered)
+ BUG();
+
+ ret = register_kprobe(&probe->kprobe);
+ if (ret >= 0) {
+ probe->registered = true;
+ probe->hit = -1;
+ }
+ return ret;
+}
+
+static int __kprobes
+test_before_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static void __kprobes
+test_before_post_handler(struct kprobe *p, struct pt_regs *regs,
+ unsigned long flags)
+{
+ setup_test_context(regs);
+ initial_regs = *regs;
+ initial_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+}
+
+static int __kprobes
+test_case_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static int __kprobes
+test_after_pre_handler(struct kprobe *p, struct pt_regs *regs)
+{
+ if (container_of(p, struct test_probe, kprobe)->hit == test_instance)
+ return 0; /* Already run for this test instance */
+
+ result_regs = *regs;
+ result_regs.ARM_cpsr &= ~PSR_IGNORE_BITS;
+
+ /* Undo any changes done to SP by the test case */
+ regs->ARM_sp = (unsigned long)current_stack;
+
+ container_of(p, struct test_probe, kprobe)->hit = test_instance;
+ return 0;
+}
+
+static struct test_probe test_before_probe = {
+ .kprobe.pre_handler = test_before_pre_handler,
+ .kprobe.post_handler = test_before_post_handler,
+};
+
+static struct test_probe test_case_probe = {
+ .kprobe.pre_handler = test_case_pre_handler,
+};
+
+static struct test_probe test_after_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static struct test_probe test_after2_probe = {
+ .kprobe.pre_handler = test_after_pre_handler,
+};
+
+static void test_case_cleanup(void)
+{
+ unregister_test_probe(&test_before_probe);
+ unregister_test_probe(&test_case_probe);
+ unregister_test_probe(&test_after_probe);
+ unregister_test_probe(&test_after2_probe);
+}
+
+static void print_registers(struct pt_regs *regs)
+{
+ pr_err("r0 %08lx | r1 %08lx | r2 %08lx | r3 %08lx\n",
+ regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+ pr_err("r4 %08lx | r5 %08lx | r6 %08lx | r7 %08lx\n",
+ regs->ARM_r4, regs->ARM_r5, regs->ARM_r6, regs->ARM_r7);
+ pr_err("r8 %08lx | r9 %08lx | r10 %08lx | r11 %08lx\n",
+ regs->ARM_r8, regs->ARM_r9, regs->ARM_r10, regs->ARM_fp);
+ pr_err("r12 %08lx | sp %08lx | lr %08lx | pc %08lx\n",
+ regs->ARM_ip, regs->ARM_sp, regs->ARM_lr, regs->ARM_pc);
+ pr_err("cpsr %08lx\n", regs->ARM_cpsr);
+}
+
+static void print_memory(u32 *mem, size_t size)
+{
+ int i;
+ for (i = 0; i < size / sizeof(u32); i += 4)
+ pr_err("%08x %08x %08x %08x\n", mem[i], mem[i+1],
+ mem[i+2], mem[i+3]);
+}
+
+static size_t expected_memory_size(u32 *sp)
+{
+ size_t size = sizeof(expected_memory);
+ int offset = (uintptr_t)sp - (uintptr_t)current_stack;
+ if (offset > 0)
+ size -= offset;
+ return size;
+}
+
+static void test_case_failed(const char *message)
+{
+ test_case_cleanup();
+
+ pr_err("FAIL: %s\n", message);
+ pr_err("FAIL: Test %s\n", current_title);
+ pr_err("FAIL: Scenario %d\n", test_case_run_count >> 1);
+}
+
+static unsigned long next_instruction(unsigned long pc)
+{
+#ifdef CONFIG_THUMB2_KERNEL
+ if ((pc & 1) && !is_wide_instruction(*(u16 *)(pc - 1)))
+ return pc + 2;
+ else
+#endif
+ return pc + 4;
+}
+
+static uintptr_t __used kprobes_test_case_start(const char *title, void *stack)
+{
+ struct test_arg *args;
+ struct test_arg_end *end_arg;
+ unsigned long test_code;
+
+ args = (struct test_arg *)PTR_ALIGN(title + strlen(title) + 1, 4);
+
+ current_title = title;
+ current_args = args;
+ current_stack = stack;
+
+ ++test_try_count;
+
+ while (args->type != ARG_TYPE_END)
+ ++args;
+ end_arg = (struct test_arg_end *)args;
+
+ test_code = (unsigned long)(args + 1); /* Code starts after args */
+
+ test_case_is_thumb = end_arg->flags & ARG_FLAG_THUMB;
+ if (test_case_is_thumb)
+ test_code |= 1;
+
+ current_code_start = test_code;
+
+ current_branch_target = 0;
+ if (end_arg->branch_offset != end_arg->end_offset)
+ current_branch_target = test_code + end_arg->branch_offset;
+
+ test_code += end_arg->code_offset;
+ test_before_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ test_code = next_instruction(test_code);
+ test_case_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (test_case_is_thumb) {
+ u16 *p = (u16 *)(test_code & ~1);
+ current_instruction = p[0];
+ if (is_wide_instruction(current_instruction)) {
+ current_instruction <<= 16;
+ current_instruction |= p[1];
+ }
+ } else {
+ current_instruction = *(u32 *)test_code;
+ }
+
+ if (current_title[0] == '.')
+ verbose("%s\n", current_title);
+ else
+ verbose("%s\t@ %0*x\n", current_title,
+ test_case_is_thumb ? 4 : 8,
+ current_instruction);
+
+ test_code = next_instruction(test_code);
+ test_after_probe.kprobe.addr = (kprobe_opcode_t *)test_code;
+
+ if (kprobe_test_flags & TEST_FLAG_NARROW_INSTR) {
+ if (!test_case_is_thumb ||
+ is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 16-bit instruction");
+ goto fail;
+ }
+ } else {
+ if (test_case_is_thumb &&
+ !is_wide_instruction(current_instruction)) {
+ test_case_failed("expected 32-bit instruction");
+ goto fail;
+ }
+ }
+
+ coverage_add(current_instruction);
+
+ if (end_arg->flags & ARG_FLAG_UNSUPPORTED) {
+ if (register_test_probe(&test_case_probe) < 0)
+ goto pass;
+ test_case_failed("registered probe for unsupported instruction");
+ goto fail;
+ }
+
+ if (end_arg->flags & ARG_FLAG_SUPPORTED) {
+ if (register_test_probe(&test_case_probe) >= 0)
+ goto pass;
+ test_case_failed("couldn't register probe for supported instruction");
+ goto fail;
+ }
+
+ if (register_test_probe(&test_before_probe) < 0) {
+ test_case_failed("register test_before_probe failed");
+ goto fail;
+ }
+ if (register_test_probe(&test_after_probe) < 0) {
+ test_case_failed("register test_after_probe failed");
+ goto fail;
+ }
+ if (current_branch_target) {
+ test_after2_probe.kprobe.addr =
+ (kprobe_opcode_t *)current_branch_target;
+ if (register_test_probe(&test_after2_probe) < 0) {
+ test_case_failed("register test_after2_probe failed");
+ goto fail;
+ }
+ }
+
+ /* Start first run of test case */
+ test_case_run_count = 0;
+ ++test_instance;
+ return current_code_start;
+pass:
+ test_case_run_count = TEST_CASE_PASSED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+fail:
+ test_case_run_count = TEST_CASE_FAILED;
+ return (uintptr_t)test_after_probe.kprobe.addr;
+}
+
+static bool check_test_results(void)
+{
+ size_t mem_size = 0;
+ u32 *mem = 0;
+
+ if (memcmp(&expected_regs, &result_regs, sizeof(expected_regs))) {
+ test_case_failed("registers differ");
+ goto fail;
+ }
+
+ if (memory_needs_checking) {
+ mem = (u32 *)result_regs.ARM_sp;
+ mem_size = expected_memory_size(mem);
+ if (memcmp(expected_memory, mem, mem_size)) {
+ test_case_failed("test memory differs");
+ goto fail;
+ }
+ }
+
+ return true;
+
+fail:
+ pr_err("initial_regs:\n");
+ print_registers(&initial_regs);
+ pr_err("expected_regs:\n");
+ print_registers(&expected_regs);
+ pr_err("result_regs:\n");
+ print_registers(&result_regs);
+
+ if (mem) {
+ pr_err("current_stack=%p\n", current_stack);
+ pr_err("expected_memory:\n");
+ print_memory(expected_memory, mem_size);
+ pr_err("result_memory:\n");
+ print_memory(mem, mem_size);
+ }
+
+ return false;
+}
+
+static uintptr_t __used kprobes_test_case_end(void)
+{
+ if (test_case_run_count < 0) {
+ if (test_case_run_count == TEST_CASE_PASSED)
+ /* kprobes_test_case_start did all the needed testing */
+ goto pass;
+ else
+ /* kprobes_test_case_start failed */
+ goto fail;
+ }
+
+ if (test_before_probe.hit != test_instance) {
+ test_case_failed("test_before_handler not run");
+ goto fail;
+ }
+
+ if (test_after_probe.hit != test_instance &&
+ test_after2_probe.hit != test_instance) {
+ test_case_failed("test_after_handler not run");
+ goto fail;
+ }
+
+ /*
+ * Even numbered test runs ran without a probe on the test case so
+ * we can gather reference results. The subsequent odd numbered run
+ * will have the probe inserted.
+ */
+ if ((test_case_run_count & 1) == 0) {
+ /* Save results from run without probe */
+ u32 *mem = (u32 *)result_regs.ARM_sp;
+ expected_regs = result_regs;
+ memcpy(expected_memory, mem, expected_memory_size(mem));
+
+ /* Insert probe onto test case instruction */
+ if (register_test_probe(&test_case_probe) < 0) {
+ test_case_failed("register test_case_probe failed");
+ goto fail;
+ }
+ } else {
+ /* Check probe ran as expected */
+ if (probe_should_run == 1) {
+ if (test_case_probe.hit != test_instance) {
+ test_case_failed("test_case_handler not run");
+ goto fail;
+ }
+ } else if (probe_should_run == 0) {
+ if (test_case_probe.hit == test_instance) {
+ test_case_failed("test_case_handler ran");
+ goto fail;
+ }
+ }
+
+ /* Remove probe for any subsequent reference run */
+ unregister_test_probe(&test_case_probe);
+
+ if (!check_test_results())
+ goto fail;
+
+ if (is_last_scenario)
+ goto pass;
+ }
+
+ /* Do next test run */
+ ++test_case_run_count;
+ ++test_instance;
+ return current_code_start;
+fail:
+ ++test_fail_count;
+ goto end;
+pass:
+ ++test_pass_count;
+end:
+ test_case_cleanup();
+ return 0;
+}
+
+
+/*
+ * Top level test functions
+ */
+
+static int run_test_cases(void (*tests)(void), const union decode_item *table)
+{
+ int ret;
+
+ pr_info(" Check decoding tables\n");
+ ret = table_test(table);
+ if (ret)
+ return ret;
+
+ pr_info(" Run test cases\n");
+ ret = coverage_start(table);
+ if (ret)
+ return ret;
+
+ tests();
+
+ coverage_end();
+ return 0;
+}
+
+
+static int __init run_all_tests(void)
+{
+ int ret = 0;
+
+ pr_info("Begining kprobe tests...\n");
+
+#ifndef CONFIG_THUMB2_KERNEL
+
+ pr_info("Probe ARM code\n");
+ ret = run_api_tests(arm_func);
+ if (ret)
+ goto out;
+
+ pr_info("ARM instruction simulation\n");
+ ret = run_test_cases(kprobe_arm_test_cases, kprobe_decode_arm_table);
+ if (ret)
+ goto out;
+
+#else /* CONFIG_THUMB2_KERNEL */
+
+ pr_info("Probe 16-bit Thumb code\n");
+ ret = run_api_tests(thumb16_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, even halfword\n");
+ ret = run_api_tests(thumb32even_func);
+ if (ret)
+ goto out;
+
+ pr_info("Probe 32-bit Thumb code, odd halfword\n");
+ ret = run_api_tests(thumb32odd_func);
+ if (ret)
+ goto out;
+
+ pr_info("16-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb16_test_cases,
+ kprobe_decode_thumb16_table);
+ if (ret)
+ goto out;
+
+ pr_info("32-bit Thumb instruction simulation\n");
+ ret = run_test_cases(kprobe_thumb32_test_cases,
+ kprobe_decode_thumb32_table);
+ if (ret)
+ goto out;
+#endif
+
+ pr_info("Total instruction simulation tests=%d, pass=%d fail=%d\n",
+ test_try_count, test_pass_count, test_fail_count);
+ if (test_fail_count) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+#if BENCHMARKING
+ pr_info("Benchmarks\n");
+ ret = run_benchmarks();
+ if (ret)
+ goto out;
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 7
+ /* We are able to run all test cases so coverage should be complete */
+ if (coverage_fail) {
+ pr_err("FAIL: Test coverage checks failed\n");
+ ret = -EINVAL;
+ goto out;
+ }
+#endif
+
+out:
+ if (ret == 0)
+ pr_info("Finished kprobe tests OK\n");
+ else
+ pr_err("kprobe tests failed\n");
+
+ return ret;
+}
+
+
+/*
+ * Module setup
+ */
+
+#ifdef MODULE
+
+static void __exit kprobe_test_exit(void)
+{
+}
+
+module_init(run_all_tests)
+module_exit(kprobe_test_exit)
+MODULE_LICENSE("GPL");
+
+#else /* !MODULE */
+
+late_initcall(run_all_tests);
+
+#endif
diff --git a/arch/arm/kernel/kprobes-test.h b/arch/arm/kernel/kprobes-test.h
new file mode 100644
index 0000000..0dc5d77
--- /dev/null
+++ b/arch/arm/kernel/kprobes-test.h
@@ -0,0 +1,392 @@
+/*
+ * arch/arm/kernel/kprobes-test.h
+ *
+ * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define VERBOSE 0 /* Set to '1' for more logging of test cases */
+
+#ifdef CONFIG_THUMB2_KERNEL
+#define NORMAL_ISA "16"
+#else
+#define NORMAL_ISA "32"
+#endif
+
+
+/* Flags used in kprobe_test_flags */
+#define TEST_FLAG_NO_ITBLOCK (1<<0)
+#define TEST_FLAG_FULL_ITBLOCK (1<<1)
+#define TEST_FLAG_NARROW_INSTR (1<<2)
+
+extern int kprobe_test_flags;
+extern int kprobe_test_cc_position;
+
+
+#define TEST_MEMORY_SIZE 256
+
+
+/*
+ * Test case structures.
+ *
+ * The arguments given to test cases can be one of three types.
+ *
+ * ARG_TYPE_REG
+ * Load a register with the given value.
+ *
+ * ARG_TYPE_PTR
+ * Load a register with a pointer into the stack buffer (SP + given value).
+ *
+ * ARG_TYPE_MEM
+ * Store the given value into the stack buffer at [SP+index].
+ *
+ */
+
+#define ARG_TYPE_END 0
+#define ARG_TYPE_REG 1
+#define ARG_TYPE_PTR 2
+#define ARG_TYPE_MEM 3
+
+#define ARG_FLAG_UNSUPPORTED 0x01
+#define ARG_FLAG_SUPPORTED 0x02
+#define ARG_FLAG_THUMB 0x10 /* Must be 16 so TEST_ISA can be used */
+#define ARG_FLAG_ARM 0x20 /* Must be 32 so TEST_ISA can be used */
+
+struct test_arg {
+ u8 type; /* ARG_TYPE_x */
+ u8 _padding[7];
+};
+
+struct test_arg_regptr {
+ u8 type; /* ARG_TYPE_REG or ARG_TYPE_PTR */
+ u8 reg;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_mem {
+ u8 type; /* ARG_TYPE_MEM */
+ u8 index;
+ u8 _padding[2];
+ u32 val;
+};
+
+struct test_arg_end {
+ u8 type; /* ARG_TYPE_END */
+ u8 flags; /* ARG_FLAG_x */
+ u16 code_offset;
+ u16 branch_offset;
+ u16 end_offset;
+};
+
+
+/*
+ * Building blocks for test cases.
+ *
+ * Each test case is wrapped between TESTCASE_START and TESTCASE_END.
+ *
+ * To specify arguments for a test case the TEST_ARG_{REG,PTR,MEM} macros are
+ * used followed by a terminating TEST_ARG_END.
+ *
+ * After this, the instruction to be tested is defined with TEST_INSTRUCTION.
+ * Or for branches, TEST_BRANCH_B and TEST_BRANCH_F (branch forwards/backwards).
+ *
+ * Some specific test cases may make use of other custom constructs.
+ */
+
+#if VERBOSE
+#define verbose(fmt, ...) pr_info(fmt, ##__VA_ARGS__)
+#else
+#define verbose(fmt, ...)
+#endif
+
+#define TEST_GROUP(title) \
+ verbose("\n"); \
+ verbose(title"\n"); \
+ verbose("---------------------------------------------------------\n");
+
+#define TESTCASE_START(title) \
+ __asm__ __volatile__ ( \
+ "bl __kprobes_test_case_start \n\t" \
+ /* don't use .asciz here as 'title' may be */ \
+ /* multiple strings to be concatenated. */ \
+ ".ascii "#title" \n\t" \
+ ".byte 0 \n\t" \
+ ".align 2 \n\t"
+
+#define TEST_ARG_REG(reg, val) \
+ ".byte "__stringify(ARG_TYPE_REG)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_PTR(reg, val) \
+ ".byte "__stringify(ARG_TYPE_PTR)" \n\t" \
+ ".byte "#reg" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_MEM(index, val) \
+ ".byte "__stringify(ARG_TYPE_MEM)" \n\t" \
+ ".byte "#index" \n\t" \
+ ".short 0 \n\t" \
+ ".word "#val" \n\t"
+
+#define TEST_ARG_END(flags) \
+ ".byte "__stringify(ARG_TYPE_END)" \n\t" \
+ ".byte "TEST_ISA flags" \n\t" \
+ ".short 50f-0f \n\t" \
+ ".short 2f-0f \n\t" \
+ ".short 99f-0f \n\t" \
+ ".code "TEST_ISA" \n\t" \
+ "0: \n\t"
+
+#define TEST_INSTRUCTION(instruction) \
+ "50: nop \n\t" \
+ "1: "instruction" \n\t" \
+ " nop \n\t"
+
+#define TEST_BRANCH_F(instruction, xtra_dist) \
+ TEST_INSTRUCTION(instruction) \
+ ".if "#xtra_dist" \n\t" \
+ " b 99f \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t"
+
+#define TEST_BRANCH_B(instruction, xtra_dist) \
+ " b 50f \n\t" \
+ " b 99f \n\t" \
+ "2: nop \n\t" \
+ " b 99f \n\t" \
+ ".if "#xtra_dist" \n\t" \
+ ".space "#xtra_dist" \n\t" \
+ ".endif \n\t" \
+ TEST_INSTRUCTION(instruction)
+
+#define TESTCASE_END \
+ "2: \n\t" \
+ "99: \n\t" \
+ " bl __kprobes_test_case_end_"TEST_ISA" \n\t" \
+ ".code "NORMAL_ISA" \n\t" \
+ : : \
+ : "r0", "r1", "r2", "r3", "ip", "lr", "memory", "cc" \
+ );
+
+
+/*
+ * Macros to define test cases.
+ *
+ * Those of the form TEST_{R,P,M}* can be used to define test cases
+ * which take combinations of the three basic types of arguments. E.g.
+ *
+ * TEST_R One register argument
+ * TEST_RR Two register arguments
+ * TEST_RPR A register, a pointer, then a register argument
+ *
+ * For testing instructions which may branch, there are macros TEST_BF_*
+ * and TEST_BB_* for branching forwards and backwards.
+ *
+ * TEST_SUPPORTED and TEST_UNSUPPORTED don't cause the code to be executed,
+ * the just verify that a kprobe is or is not allowed on the given instruction.
+ */
+
+#define TEST(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_UNSUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_UNSUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_SUPPORTED(code) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("|"__stringify(ARG_FLAG_SUPPORTED)) \
+ TEST_INSTRUCTION(code) \
+ TESTCASE_END
+
+#define TEST_R(code1, reg, val, code2) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg code2) \
+ TESTCASE_END
+
+#define TEST_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4, reg4, val4) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_REG(reg4, val4) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4 #reg4) \
+ TESTCASE_END
+
+#define TEST_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2) \
+ TESTCASE_END
+
+#define TEST_PR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_RP(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3) \
+ TESTCASE_END
+
+#define TEST_PRR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RPR(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_PTR(reg2, val2) \
+ TEST_ARG_REG(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_RRP(code1, reg1, val1, code2, reg2, val2, code3, reg3, val3, code4)\
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_PTR(reg3, val3) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 #reg1 code2 #reg2 code3 #reg3 code4) \
+ TESTCASE_END
+
+#define TEST_BF_P(code1, reg1, val1, code2) \
+ TESTCASE_START(code1 #reg1 code2) \
+ TEST_ARG_PTR(reg1, val1) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2, 0) \
+ TESTCASE_END
+
+#define TEST_BF_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_X(code, xtra_dist) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BB_RX(code1, reg, val, code2, xtra_dist) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_B(code1 #reg code2, xtra_dist) \
+ TESTCASE_END
+
+#define TEST_BF(code) TEST_BF_X(code, 0)
+#define TEST_BB(code) TEST_BB_X(code, 0)
+
+#define TEST_BF_R(code1, reg, val, code2) TEST_BF_RX(code1, reg, val, code2, 0)
+#define TEST_BB_R(code1, reg, val, code2) TEST_BB_RX(code1, reg, val, code2, 0)
+
+#define TEST_BF_RR(code1, reg1, val1, code2, reg2, val2, code3) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_BRANCH_F(code1 #reg1 code2 #reg2 code3, 0) \
+ TESTCASE_END
+
+#define TEST_X(code, codex) \
+ TESTCASE_START(code) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RX(code1, reg, val, code2, codex) \
+ TESTCASE_START(code1 #reg code2) \
+ TEST_ARG_REG(reg, val) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg) code2) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+#define TEST_RRX(code1, reg1, val1, code2, reg2, val2, code3, codex) \
+ TESTCASE_START(code1 #reg1 code2 #reg2 code3) \
+ TEST_ARG_REG(reg1, val1) \
+ TEST_ARG_REG(reg2, val2) \
+ TEST_ARG_END("") \
+ TEST_INSTRUCTION(code1 __stringify(reg1) code2 __stringify(reg2) code3) \
+ " b 99f \n\t" \
+ " "codex" \n\t" \
+ TESTCASE_END
+
+
+/* Various values used in test cases... */
+#define N(val) (val ^ 0xffffffff)
+#define VAL1 0x12345678
+#define VAL2 N(VAL1)
+#define VAL3 0xa5f801
+#define VAL4 N(VAL3)
+#define VALM 0x456789ab
+#define VALR 0xdeaddead
+#define HH1 0x0123fecb
+#define HH2 0xa9874567
+
+
+#ifdef CONFIG_THUMB2_KERNEL
+void kprobe_thumb16_test_cases(void);
+void kprobe_thumb32_test_cases(void);
+#else
+void kprobe_arm_test_cases(void);
+#endif
diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c
index 902ca59..8f96ec7 100644
--- a/arch/arm/kernel/kprobes-thumb.c
+++ b/arch/arm/kernel/kprobes-thumb.c
@@ -10,6 +10,7 @@
#include <linux/kernel.h>
#include <linux/kprobes.h>
+#include <linux/module.h>
#include "kprobes.h"
@@ -943,6 +944,9 @@
*/
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb32_table);
+#endif
static void __kprobes
t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs)
@@ -1423,6 +1427,9 @@
DECODE_END
};
+#ifdef CONFIG_ARM_KPROBES_TEST_MODULE
+EXPORT_SYMBOL_GPL(kprobe_decode_thumb16_table);
+#endif
static unsigned long __kprobes thumb_check_cc(unsigned long cpsr)
{
diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h
index a6aeda0..38945f7 100644
--- a/arch/arm/kernel/kprobes.h
+++ b/arch/arm/kernel/kprobes.h
@@ -413,6 +413,14 @@
DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0)
+#ifdef CONFIG_THUMB2_KERNEL
+extern const union decode_item kprobe_decode_thumb16_table[];
+extern const union decode_item kprobe_decode_thumb32_table[];
+#else
+extern const union decode_item kprobe_decode_arm_table[];
+#endif
+
+
int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi,
const union decode_item *table, bool thumb16);
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 53c9c26..e6e5d7c 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -12,6 +12,7 @@
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
+#include <linux/bitmap.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -26,16 +27,8 @@
#include <asm/pmu.h>
#include <asm/stacktrace.h>
-static struct platform_device *pmu_device;
-
/*
- * Hardware lock to serialize accesses to PMU registers. Needed for the
- * read/modify/write sequences.
- */
-static DEFINE_RAW_SPINLOCK(pmu_lock);
-
-/*
- * ARMv6 supports a maximum of 3 events, starting from index 1. If we add
+ * ARMv6 supports a maximum of 3 events, starting from index 0. If we add
* another platform that supports more, we need to increase this to be the
* largest of all platforms.
*
@@ -43,62 +36,24 @@
* cycle counter CCNT + 31 events counters CNT0..30.
* Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters.
*/
-#define ARMPMU_MAX_HWEVENTS 33
+#define ARMPMU_MAX_HWEVENTS 32
-/* The events for a given CPU. */
-struct cpu_hw_events {
- /*
- * The events that are active on the CPU for the given index. Index 0
- * is reserved.
- */
- struct perf_event *events[ARMPMU_MAX_HWEVENTS];
+static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
+static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
+static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
- /*
- * A 1 bit for an index indicates that the counter is being used for
- * an event. A 0 means that the counter can be used.
- */
- unsigned long used_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-
- /*
- * A 1 bit for an index indicates that the counter is actively being
- * used.
- */
- unsigned long active_mask[BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)];
-};
-static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events);
-
-struct arm_pmu {
- enum arm_perf_pmu_ids id;
- const char *name;
- irqreturn_t (*handle_irq)(int irq_num, void *dev);
- void (*enable)(struct hw_perf_event *evt, int idx);
- void (*disable)(struct hw_perf_event *evt, int idx);
- int (*get_event_idx)(struct cpu_hw_events *cpuc,
- struct hw_perf_event *hwc);
- u32 (*read_counter)(int idx);
- void (*write_counter)(int idx, u32 val);
- void (*start)(void);
- void (*stop)(void);
- void (*reset)(void *);
- const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX];
- const unsigned (*event_map)[PERF_COUNT_HW_MAX];
- u32 raw_event_mask;
- int num_events;
- u64 max_period;
-};
+#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
/* Set at runtime when we know what CPU type we are. */
-static const struct arm_pmu *armpmu;
+static struct arm_pmu *cpu_pmu;
enum arm_perf_pmu_ids
armpmu_get_pmu_id(void)
{
int id = -ENODEV;
- if (armpmu != NULL)
- id = armpmu->id;
+ if (cpu_pmu != NULL)
+ id = cpu_pmu->id;
return id;
}
@@ -109,8 +64,8 @@
{
int max_events = 0;
- if (armpmu != NULL)
- max_events = armpmu->num_events;
+ if (cpu_pmu != NULL)
+ max_events = cpu_pmu->num_events;
return max_events;
}
@@ -130,7 +85,11 @@
#define CACHE_OP_UNSUPPORTED 0xFFFF
static int
-armpmu_map_cache_event(u64 config)
+armpmu_map_cache_event(const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u64 config)
{
unsigned int cache_type, cache_op, cache_result, ret;
@@ -146,7 +105,7 @@
if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX)
return -EINVAL;
- ret = (int)(*armpmu->cache_map)[cache_type][cache_op][cache_result];
+ ret = (int)(*cache_map)[cache_type][cache_op][cache_result];
if (ret == CACHE_OP_UNSUPPORTED)
return -ENOENT;
@@ -155,23 +114,46 @@
}
static int
-armpmu_map_event(u64 config)
+armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config)
{
- int mapping = (*armpmu->event_map)[config];
- return mapping == HW_OP_UNSUPPORTED ? -EOPNOTSUPP : mapping;
+ int mapping = (*event_map)[config];
+ return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping;
}
static int
-armpmu_map_raw_event(u64 config)
+armpmu_map_raw_event(u32 raw_event_mask, u64 config)
{
- return (int)(config & armpmu->raw_event_mask);
+ return (int)(config & raw_event_mask);
}
-static int
+static int map_cpu_event(struct perf_event *event,
+ const unsigned (*event_map)[PERF_COUNT_HW_MAX],
+ const unsigned (*cache_map)
+ [PERF_COUNT_HW_CACHE_MAX]
+ [PERF_COUNT_HW_CACHE_OP_MAX]
+ [PERF_COUNT_HW_CACHE_RESULT_MAX],
+ u32 raw_event_mask)
+{
+ u64 config = event->attr.config;
+
+ switch (event->attr.type) {
+ case PERF_TYPE_HARDWARE:
+ return armpmu_map_event(event_map, config);
+ case PERF_TYPE_HW_CACHE:
+ return armpmu_map_cache_event(cache_map, config);
+ case PERF_TYPE_RAW:
+ return armpmu_map_raw_event(raw_event_mask, config);
+ }
+
+ return -ENOENT;
+}
+
+int
armpmu_event_set_period(struct perf_event *event,
struct hw_perf_event *hwc,
int idx)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
s64 left = local64_read(&hwc->period_left);
s64 period = hwc->sample_period;
int ret = 0;
@@ -202,11 +184,12 @@
return ret;
}
-static u64
+u64
armpmu_event_update(struct perf_event *event,
struct hw_perf_event *hwc,
int idx, int overflow)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
u64 delta, prev_raw_count, new_raw_count;
again:
@@ -246,11 +229,9 @@
static void
armpmu_stop(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to update the counter, so ignore
* PERF_EF_UPDATE, see comments in armpmu_start().
@@ -266,11 +247,9 @@
static void
armpmu_start(struct perf_event *event, int flags)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- if (!armpmu)
- return;
-
/*
* ARM pmu always has to reprogram the period, so ignore
* PERF_EF_RELOAD, see the comment below.
@@ -293,16 +272,16 @@
static void
armpmu_del(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
WARN_ON(idx < 0);
- clear_bit(idx, cpuc->active_mask);
armpmu_stop(event, PERF_EF_UPDATE);
- cpuc->events[idx] = NULL;
- clear_bit(idx, cpuc->used_mask);
+ hw_events->events[idx] = NULL;
+ clear_bit(idx, hw_events->used_mask);
perf_event_update_userpage(event);
}
@@ -310,7 +289,8 @@
static int
armpmu_add(struct perf_event *event, int flags)
{
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
@@ -318,7 +298,7 @@
perf_pmu_disable(event->pmu);
/* If we don't have a space for the counter then finish early. */
- idx = armpmu->get_event_idx(cpuc, hwc);
+ idx = armpmu->get_event_idx(hw_events, hwc);
if (idx < 0) {
err = idx;
goto out;
@@ -330,8 +310,7 @@
*/
event->hw.idx = idx;
armpmu->disable(hwc, idx);
- cpuc->events[idx] = event;
- set_bit(idx, cpuc->active_mask);
+ hw_events->events[idx] = event;
hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
if (flags & PERF_EF_START)
@@ -345,25 +324,25 @@
return err;
}
-static struct pmu pmu;
-
static int
-validate_event(struct cpu_hw_events *cpuc,
+validate_event(struct pmu_hw_events *hw_events,
struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event fake_event = event->hw;
+ struct pmu *leader_pmu = event->group_leader->pmu;
- if (event->pmu != &pmu || event->state <= PERF_EVENT_STATE_OFF)
+ if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
return 1;
- return armpmu->get_event_idx(cpuc, &fake_event) >= 0;
+ return armpmu->get_event_idx(hw_events, &fake_event) >= 0;
}
static int
validate_group(struct perf_event *event)
{
struct perf_event *sibling, *leader = event->group_leader;
- struct cpu_hw_events fake_pmu;
+ struct pmu_hw_events fake_pmu;
memset(&fake_pmu, 0, sizeof(fake_pmu));
@@ -383,110 +362,119 @@
static irqreturn_t armpmu_platform_irq(int irq, void *dev)
{
- struct arm_pmu_platdata *plat = dev_get_platdata(&pmu_device->dev);
+ struct arm_pmu *armpmu = (struct arm_pmu *) dev;
+ struct platform_device *plat_device = armpmu->plat_device;
+ struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev);
return plat->handle_irq(irq, dev, armpmu->handle_irq);
}
+static void
+armpmu_release_hardware(struct arm_pmu *armpmu)
+{
+ int i, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
+
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+
+ for (i = 0; i < irqs; ++i) {
+ if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs))
+ continue;
+ irq = platform_get_irq(pmu_device, i);
+ if (irq >= 0)
+ free_irq(irq, armpmu);
+ }
+
+ release_pmu(armpmu->type);
+}
+
static int
-armpmu_reserve_hardware(void)
+armpmu_reserve_hardware(struct arm_pmu *armpmu)
{
struct arm_pmu_platdata *plat;
irq_handler_t handle_irq;
- int i, err = -ENODEV, irq;
+ int i, err, irq, irqs;
+ struct platform_device *pmu_device = armpmu->plat_device;
- pmu_device = reserve_pmu(ARM_PMU_DEVICE_CPU);
- if (IS_ERR(pmu_device)) {
+ err = reserve_pmu(armpmu->type);
+ if (err) {
pr_warning("unable to reserve pmu\n");
- return PTR_ERR(pmu_device);
+ return err;
}
- init_pmu(ARM_PMU_DEVICE_CPU);
-
plat = dev_get_platdata(&pmu_device->dev);
if (plat && plat->handle_irq)
handle_irq = armpmu_platform_irq;
else
handle_irq = armpmu->handle_irq;
- if (pmu_device->num_resources < 1) {
+ irqs = min(pmu_device->num_resources, num_possible_cpus());
+ if (irqs < 1) {
pr_err("no irqs for PMUs defined\n");
return -ENODEV;
}
- for (i = 0; i < pmu_device->num_resources; ++i) {
+ for (i = 0; i < irqs; ++i) {
+ err = 0;
irq = platform_get_irq(pmu_device, i);
if (irq < 0)
continue;
+ /*
+ * If we have a single PMU interrupt that we can't shift,
+ * assume that we're running on a uniprocessor machine and
+ * continue. Otherwise, continue without this interrupt.
+ */
+ if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) {
+ pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
+ irq, i);
+ continue;
+ }
+
err = request_irq(irq, handle_irq,
IRQF_DISABLED | IRQF_NOBALANCING,
- "armpmu", NULL);
+ "arm-pmu", armpmu);
if (err) {
- pr_warning("unable to request IRQ%d for ARM perf "
- "counters\n", irq);
- break;
+ pr_err("unable to request IRQ%d for ARM PMU counters\n",
+ irq);
+ armpmu_release_hardware(armpmu);
+ return err;
}
+
+ cpumask_set_cpu(i, &armpmu->active_irqs);
}
- if (err) {
- for (i = i - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
- }
-
- return err;
+ return 0;
}
static void
-armpmu_release_hardware(void)
-{
- int i, irq;
-
- for (i = pmu_device->num_resources - 1; i >= 0; --i) {
- irq = platform_get_irq(pmu_device, i);
- if (irq >= 0)
- free_irq(irq, NULL);
- }
- armpmu->stop();
-
- release_pmu(ARM_PMU_DEVICE_CPU);
- pmu_device = NULL;
-}
-
-static atomic_t active_events = ATOMIC_INIT(0);
-static DEFINE_MUTEX(pmu_reserve_mutex);
-
-static void
hw_perf_event_destroy(struct perf_event *event)
{
- if (atomic_dec_and_mutex_lock(&active_events, &pmu_reserve_mutex)) {
- armpmu_release_hardware();
- mutex_unlock(&pmu_reserve_mutex);
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
+ atomic_t *active_events = &armpmu->active_events;
+ struct mutex *pmu_reserve_mutex = &armpmu->reserve_mutex;
+
+ if (atomic_dec_and_mutex_lock(active_events, pmu_reserve_mutex)) {
+ armpmu_release_hardware(armpmu);
+ mutex_unlock(pmu_reserve_mutex);
}
}
static int
+event_requires_mode_exclusion(struct perf_event_attr *attr)
+{
+ return attr->exclude_idle || attr->exclude_user ||
+ attr->exclude_kernel || attr->exclude_hv;
+}
+
+static int
__hw_perf_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
int mapping, err;
- /* Decode the generic type into an ARM event identifier. */
- if (PERF_TYPE_HARDWARE == event->attr.type) {
- mapping = armpmu_map_event(event->attr.config);
- } else if (PERF_TYPE_HW_CACHE == event->attr.type) {
- mapping = armpmu_map_cache_event(event->attr.config);
- } else if (PERF_TYPE_RAW == event->attr.type) {
- mapping = armpmu_map_raw_event(event->attr.config);
- } else {
- pr_debug("event type %x not supported\n", event->attr.type);
- return -EOPNOTSUPP;
- }
+ mapping = armpmu->map_event(event);
if (mapping < 0) {
pr_debug("event %x:%llx not supported\n", event->attr.type,
@@ -495,34 +483,31 @@
}
/*
- * Check whether we need to exclude the counter from certain modes.
- * The ARM performance counters are on all of the time so if someone
- * has asked us for some excludes then we have to fail.
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet. For SMP systems, each core has it's own PMU so we can't do any
+ * clever allocation or constraints checking at this point.
*/
- if (event->attr.exclude_kernel || event->attr.exclude_user ||
- event->attr.exclude_hv || event->attr.exclude_idle) {
+ hwc->idx = -1;
+ hwc->config_base = 0;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ /*
+ * Check whether we need to exclude the counter from certain modes.
+ */
+ if ((!armpmu->set_event_filter ||
+ armpmu->set_event_filter(hwc, &event->attr)) &&
+ event_requires_mode_exclusion(&event->attr)) {
pr_debug("ARM performance counters do not support "
"mode exclusion\n");
return -EPERM;
}
/*
- * We don't assign an index until we actually place the event onto
- * hardware. Use -1 to signify that we haven't decided where to put it
- * yet. For SMP systems, each core has it's own PMU so we can't do any
- * clever allocation or constraints checking at this point.
+ * Store the event encoding into the config_base field.
*/
- hwc->idx = -1;
-
- /*
- * Store the event encoding into the config_base field. config and
- * event_base are unused as the only 2 things we need to know are
- * the event mapping and the counter to use. The counter to use is
- * also the indx and the config_base is the event type.
- */
- hwc->config_base = (unsigned long)mapping;
- hwc->config = 0;
- hwc->event_base = 0;
+ hwc->config_base |= (unsigned long)mapping;
if (!hwc->sample_period) {
hwc->sample_period = armpmu->max_period;
@@ -542,32 +527,23 @@
static int armpmu_event_init(struct perf_event *event)
{
+ struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
int err = 0;
+ atomic_t *active_events = &armpmu->active_events;
- switch (event->attr.type) {
- case PERF_TYPE_RAW:
- case PERF_TYPE_HARDWARE:
- case PERF_TYPE_HW_CACHE:
- break;
-
- default:
+ if (armpmu->map_event(event) == -ENOENT)
return -ENOENT;
- }
-
- if (!armpmu)
- return -ENODEV;
event->destroy = hw_perf_event_destroy;
- if (!atomic_inc_not_zero(&active_events)) {
- mutex_lock(&pmu_reserve_mutex);
- if (atomic_read(&active_events) == 0) {
- err = armpmu_reserve_hardware();
- }
+ if (!atomic_inc_not_zero(active_events)) {
+ mutex_lock(&armpmu->reserve_mutex);
+ if (atomic_read(active_events) == 0)
+ err = armpmu_reserve_hardware(armpmu);
if (!err)
- atomic_inc(&active_events);
- mutex_unlock(&pmu_reserve_mutex);
+ atomic_inc(active_events);
+ mutex_unlock(&armpmu->reserve_mutex);
}
if (err)
@@ -582,22 +558,9 @@
static void armpmu_enable(struct pmu *pmu)
{
- /* Enable all of the perf events on hardware. */
- int idx, enabled = 0;
- struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events);
-
- if (!armpmu)
- return;
-
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
- struct perf_event *event = cpuc->events[idx];
-
- if (!event)
- continue;
-
- armpmu->enable(&event->hw, idx);
- enabled = 1;
- }
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (enabled)
armpmu->start();
@@ -605,20 +568,32 @@
static void armpmu_disable(struct pmu *pmu)
{
- if (armpmu)
- armpmu->stop();
+ struct arm_pmu *armpmu = to_arm_pmu(pmu);
+ armpmu->stop();
}
-static struct pmu pmu = {
- .pmu_enable = armpmu_enable,
- .pmu_disable = armpmu_disable,
- .event_init = armpmu_event_init,
- .add = armpmu_add,
- .del = armpmu_del,
- .start = armpmu_start,
- .stop = armpmu_stop,
- .read = armpmu_read,
-};
+static void __init armpmu_init(struct arm_pmu *armpmu)
+{
+ atomic_set(&armpmu->active_events, 0);
+ mutex_init(&armpmu->reserve_mutex);
+
+ armpmu->pmu = (struct pmu) {
+ .pmu_enable = armpmu_enable,
+ .pmu_disable = armpmu_disable,
+ .event_init = armpmu_event_init,
+ .add = armpmu_add,
+ .del = armpmu_del,
+ .start = armpmu_start,
+ .stop = armpmu_stop,
+ .read = armpmu_read,
+ };
+}
+
+int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type)
+{
+ armpmu_init(armpmu);
+ return perf_pmu_register(&armpmu->pmu, name, type);
+}
/* Include the PMU-specific implementations. */
#include "perf_event_xscale.c"
@@ -630,14 +605,72 @@
* This requires SMP to be available, so exists as a separate initcall.
*/
static int __init
-armpmu_reset(void)
+cpu_pmu_reset(void)
{
- if (armpmu && armpmu->reset)
- return on_each_cpu(armpmu->reset, NULL, 1);
+ if (cpu_pmu && cpu_pmu->reset)
+ return on_each_cpu(cpu_pmu->reset, NULL, 1);
return 0;
}
-arch_initcall(armpmu_reset);
+arch_initcall(cpu_pmu_reset);
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static struct of_device_id armpmu_of_device_ids[] = {
+ {.compatible = "arm,cortex-a9-pmu"},
+ {.compatible = "arm,cortex-a8-pmu"},
+ {.compatible = "arm,arm1136-pmu"},
+ {.compatible = "arm,arm1176-pmu"},
+ {},
+};
+
+static struct platform_device_id armpmu_plat_device_ids[] = {
+ {.name = "arm-pmu"},
+ {},
+};
+
+static int __devinit armpmu_device_probe(struct platform_device *pdev)
+{
+ cpu_pmu->plat_device = pdev;
+ return 0;
+}
+
+static struct platform_driver armpmu_driver = {
+ .driver = {
+ .name = "arm-pmu",
+ .of_match_table = armpmu_of_device_ids,
+ },
+ .probe = armpmu_device_probe,
+ .id_table = armpmu_plat_device_ids,
+};
+
+static int __init register_pmu_driver(void)
+{
+ return platform_driver_register(&armpmu_driver);
+}
+device_initcall(register_pmu_driver);
+
+static struct pmu_hw_events *armpmu_get_cpu_events(void)
+{
+ return &__get_cpu_var(cpu_hw_events);
+}
+
+static void __init cpu_pmu_init(struct arm_pmu *armpmu)
+{
+ int cpu;
+ for_each_possible_cpu(cpu) {
+ struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
+ events->events = per_cpu(hw_events, cpu);
+ events->used_mask = per_cpu(used_mask, cpu);
+ raw_spin_lock_init(&events->pmu_lock);
+ }
+ armpmu->get_hw_events = armpmu_get_cpu_events;
+ armpmu->type = ARM_PMU_DEVICE_CPU;
+}
+
+/*
+ * CPU PMU identification and registration.
+ */
static int __init
init_hw_perf_events(void)
{
@@ -651,22 +684,22 @@
case 0xB360: /* ARM1136 */
case 0xB560: /* ARM1156 */
case 0xB760: /* ARM1176 */
- armpmu = armv6pmu_init();
+ cpu_pmu = armv6pmu_init();
break;
case 0xB020: /* ARM11mpcore */
- armpmu = armv6mpcore_pmu_init();
+ cpu_pmu = armv6mpcore_pmu_init();
break;
case 0xC080: /* Cortex-A8 */
- armpmu = armv7_a8_pmu_init();
+ cpu_pmu = armv7_a8_pmu_init();
break;
case 0xC090: /* Cortex-A9 */
- armpmu = armv7_a9_pmu_init();
+ cpu_pmu = armv7_a9_pmu_init();
break;
case 0xC050: /* Cortex-A5 */
- armpmu = armv7_a5_pmu_init();
+ cpu_pmu = armv7_a5_pmu_init();
break;
case 0xC0F0: /* Cortex-A15 */
- armpmu = armv7_a15_pmu_init();
+ cpu_pmu = armv7_a15_pmu_init();
break;
}
/* Intel CPUs [xscale]. */
@@ -674,23 +707,23 @@
part_number = (cpuid >> 13) & 0x7;
switch (part_number) {
case 1:
- armpmu = xscale1pmu_init();
+ cpu_pmu = xscale1pmu_init();
break;
case 2:
- armpmu = xscale2pmu_init();
+ cpu_pmu = xscale2pmu_init();
break;
}
}
- if (armpmu) {
+ if (cpu_pmu) {
pr_info("enabled with %s PMU driver, %d counters available\n",
- armpmu->name, armpmu->num_events);
+ cpu_pmu->name, cpu_pmu->num_events);
+ cpu_pmu_init(cpu_pmu);
+ armpmu_register(cpu_pmu, "cpu", PERF_TYPE_RAW);
} else {
pr_info("no hardware support available\n");
}
- perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW);
-
return 0;
}
early_initcall(init_hw_perf_events);
diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c
index dd7f3b9..e63d811 100644
--- a/arch/arm/kernel/perf_event_v6.c
+++ b/arch/arm/kernel/perf_event_v6.c
@@ -54,7 +54,7 @@
};
enum armv6_counters {
- ARMV6_CYCLE_COUNTER = 1,
+ ARMV6_CYCLE_COUNTER = 0,
ARMV6_COUNTER0,
ARMV6_COUNTER1,
};
@@ -433,6 +433,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = 0;
@@ -454,12 +455,29 @@
* Mask out the current event and set the counter to count the event
* that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+}
+
+static int counter_is_active(unsigned long pmcr, int idx)
+{
+ unsigned long mask = 0;
+ if (idx == ARMV6_CYCLE_COUNTER)
+ mask = ARMV6_PMCR_CCOUNT_IEN;
+ else if (idx == ARMV6_COUNTER0)
+ mask = ARMV6_PMCR_COUNT0_IEN;
+ else if (idx == ARMV6_COUNTER1)
+ mask = ARMV6_PMCR_COUNT1_IEN;
+
+ if (mask)
+ return pmcr & mask;
+
+ WARN_ONCE(1, "invalid counter number (%d)\n", idx);
+ return 0;
}
static irqreturn_t
@@ -468,7 +486,7 @@
{
unsigned long pmcr = armv6_pmcr_read();
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -487,11 +505,11 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
+ if (!counter_is_active(pmcr, idx))
continue;
/*
@@ -508,7 +526,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -527,28 +545,30 @@
armv6pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val |= ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
armv6pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~ARMV6_PMCR_ENABLE;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-armv6pmu_get_event_idx(struct cpu_hw_events *cpuc,
+armv6pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
/* Always place a cycle counter into the cycle counter. */
@@ -578,6 +598,7 @@
int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -598,12 +619,12 @@
* of ETM bus signal assertion cycles. The external reporting should
* be disabled and so this should never increment.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
@@ -611,6 +632,7 @@
int idx)
{
unsigned long val, mask, flags, evt = 0;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
if (ARMV6_CYCLE_COUNTER == idx) {
mask = ARMV6_PMCR_CCOUNT_IEN;
@@ -627,15 +649,21 @@
* Unlike UP ARMv6, we don't have a way of stopping the counters. We
* simply disable the interrupt reporting.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
val &= ~mask;
val |= evt;
armv6_pmcr_write(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static const struct arm_pmu armv6pmu = {
+static int armv6_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6_perf_map,
+ &armv6_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6pmu = {
.id = ARM_PERF_PMU_ID_V6,
.name = "v6",
.handle_irq = armv6pmu_handle_irq,
@@ -646,14 +674,12 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6_perf_cache_map,
- .event_map = &armv6_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return &armv6pmu;
}
@@ -665,7 +691,14 @@
* disable the interrupt reporting and update the event. When unthrottling we
* reset the period and enable the interrupt reporting.
*/
-static const struct arm_pmu armv6mpcore_pmu = {
+
+static int armv6mpcore_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv6mpcore_perf_map,
+ &armv6mpcore_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu armv6mpcore_pmu = {
.id = ARM_PERF_PMU_ID_V6MP,
.name = "v6mpcore",
.handle_irq = armv6pmu_handle_irq,
@@ -676,24 +709,22 @@
.get_event_idx = armv6pmu_get_event_idx,
.start = armv6pmu_start,
.stop = armv6pmu_stop,
- .cache_map = &armv6mpcore_perf_cache_map,
- .event_map = &armv6mpcore_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = armv6mpcore_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return &armv6mpcore_pmu;
}
#else
-static const struct arm_pmu *__init armv6pmu_init(void)
+static struct arm_pmu *__init armv6pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv6mpcore_pmu_init(void)
+static struct arm_pmu *__init armv6mpcore_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 4c85183..98b7573 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -17,6 +17,9 @@
*/
#ifdef CONFIG_CPU_V7
+
+static struct arm_pmu armv7pmu;
+
/*
* Common ARMv7 event types
*
@@ -676,25 +679,26 @@
};
/*
- * Perf Events counters
+ * Perf Events' indices
*/
-enum armv7_counters {
- ARMV7_CYCLE_COUNTER = 1, /* Cycle counter */
- ARMV7_COUNTER0 = 2, /* First event counter */
-};
+#define ARMV7_IDX_CYCLE_COUNTER 0
+#define ARMV7_IDX_COUNTER0 1
+#define ARMV7_IDX_COUNTER_LAST (ARMV7_IDX_CYCLE_COUNTER + cpu_pmu->num_events - 1)
-/*
- * The cycle counter is ARMV7_CYCLE_COUNTER.
- * The first event counter is ARMV7_COUNTER0.
- * The last event counter is (ARMV7_COUNTER0 + armpmu->num_events - 1).
- */
-#define ARMV7_COUNTER_LAST (ARMV7_COUNTER0 + armpmu->num_events - 1)
+#define ARMV7_MAX_COUNTERS 32
+#define ARMV7_COUNTER_MASK (ARMV7_MAX_COUNTERS - 1)
/*
* ARMv7 low level PMNC access
*/
/*
+ * Perf Event to low level counters mapping
+ */
+#define ARMV7_IDX_TO_COUNTER(x) \
+ (((x) - ARMV7_IDX_COUNTER0) & ARMV7_COUNTER_MASK)
+
+/*
* Per-CPU PMNC: config reg
*/
#define ARMV7_PMNC_E (1 << 0) /* Enable all counters */
@@ -708,103 +712,76 @@
#define ARMV7_PMNC_MASK 0x3f /* Mask for writable bits */
/*
- * Available counters
- */
-#define ARMV7_CNT0 0 /* First event counter */
-#define ARMV7_CCNT 31 /* Cycle counter */
-
-/* Perf Event to low level counters mapping */
-#define ARMV7_EVENT_CNT_TO_CNTx (ARMV7_COUNTER0 - ARMV7_CNT0)
-
-/*
- * CNTENS: counters enable reg
- */
-#define ARMV7_CNTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENS_C (1 << ARMV7_CCNT)
-
-/*
- * CNTENC: counters disable reg
- */
-#define ARMV7_CNTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_CNTENC_C (1 << ARMV7_CCNT)
-
-/*
- * INTENS: counters overflow interrupt enable reg
- */
-#define ARMV7_INTENS_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENS_C (1 << ARMV7_CCNT)
-
-/*
- * INTENC: counters overflow interrupt disable reg
- */
-#define ARMV7_INTENC_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_INTENC_C (1 << ARMV7_CCNT)
-
-/*
- * EVTSEL: Event selection reg
- */
-#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */
-
-/*
- * SELECT: Counter selection reg
- */
-#define ARMV7_SELECT_MASK 0x1f /* Mask for writable bits */
-
-/*
* FLAG: counters overflow flag status reg
*/
-#define ARMV7_FLAG_P(idx) (1 << (idx - ARMV7_EVENT_CNT_TO_CNTx))
-#define ARMV7_FLAG_C (1 << ARMV7_CCNT)
#define ARMV7_FLAG_MASK 0xffffffff /* Mask for writable bits */
#define ARMV7_OVERFLOWED_MASK ARMV7_FLAG_MASK
-static inline unsigned long armv7_pmnc_read(void)
+/*
+ * PMXEVTYPER: Event selection reg
+ */
+#define ARMV7_EVTYPE_MASK 0xc00000ff /* Mask for writable bits */
+#define ARMV7_EVTYPE_EVENT 0xff /* Mask for EVENT bits */
+
+/*
+ * Event filters for PMUv2
+ */
+#define ARMV7_EXCLUDE_PL1 (1 << 31)
+#define ARMV7_EXCLUDE_USER (1 << 30)
+#define ARMV7_INCLUDE_HYP (1 << 27)
+
+static inline u32 armv7_pmnc_read(void)
{
u32 val;
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r"(val));
return val;
}
-static inline void armv7_pmnc_write(unsigned long val)
+static inline void armv7_pmnc_write(u32 val)
{
val &= ARMV7_PMNC_MASK;
isb();
asm volatile("mcr p15, 0, %0, c9, c12, 0" : : "r"(val));
}
-static inline int armv7_pmnc_has_overflowed(unsigned long pmnc)
+static inline int armv7_pmnc_has_overflowed(u32 pmnc)
{
return pmnc & ARMV7_OVERFLOWED_MASK;
}
-static inline int armv7_pmnc_counter_has_overflowed(unsigned long pmnc,
- enum armv7_counters counter)
+static inline int armv7_pmnc_counter_valid(int idx)
+{
+ return idx >= ARMV7_IDX_CYCLE_COUNTER && idx <= ARMV7_IDX_COUNTER_LAST;
+}
+
+static inline int armv7_pmnc_counter_has_overflowed(u32 pmnc, int idx)
{
int ret = 0;
+ u32 counter;
- if (counter == ARMV7_CYCLE_COUNTER)
- ret = pmnc & ARMV7_FLAG_C;
- else if ((counter >= ARMV7_COUNTER0) && (counter <= ARMV7_COUNTER_LAST))
- ret = pmnc & ARMV7_FLAG_P(counter);
- else
+ if (!armv7_pmnc_counter_valid(idx)) {
pr_err("CPU%u checking wrong counter %d overflow status\n",
- smp_processor_id(), counter);
+ smp_processor_id(), idx);
+ } else {
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ ret = pmnc & BIT(counter);
+ }
return ret;
}
-static inline int armv7_pmnc_select_counter(unsigned int idx)
+static inline int armv7_pmnc_select_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST)) {
- pr_err("CPU%u selecting wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u selecting wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- val = (idx - ARMV7_EVENT_CNT_TO_CNTx) & ARMV7_SELECT_MASK;
- asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (val));
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
isb();
return idx;
@@ -812,124 +789,95 @@
static inline u32 armv7pmu_read_counter(int idx)
{
- unsigned long value = 0;
+ u32 value = 0;
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mrc p15, 0, %0, c9, c13, 2"
- : "=r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
return value;
}
static inline void armv7pmu_write_counter(int idx, u32 value)
{
- if (idx == ARMV7_CYCLE_COUNTER)
- asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if ((idx >= ARMV7_COUNTER0) && (idx <= ARMV7_COUNTER_LAST)) {
- if (armv7_pmnc_select_counter(idx) == idx)
- asm volatile("mcr p15, 0, %0, c9, c13, 2"
- : : "r" (value));
- } else
+ if (!armv7_pmnc_counter_valid(idx))
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
+ else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
+ else if (armv7_pmnc_select_counter(idx) == idx)
+ asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
}
-static inline void armv7_pmnc_write_evtsel(unsigned int idx, u32 val)
+static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
{
if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTSEL_MASK;
+ val &= ARMV7_EVTYPE_MASK;
asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
}
-static inline u32 armv7_pmnc_enable_counter(unsigned int idx)
+static inline int armv7_pmnc_enable_counter(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENS_C;
- else
- val = ARMV7_CNTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_counter(unsigned int idx)
+static inline int armv7_pmnc_disable_counter(int idx)
{
- u32 val;
+ u32 counter;
-
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_CNTENC_C;
- else
- val = ARMV7_CNTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_enable_intens(unsigned int idx)
+static inline int armv7_pmnc_enable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u enabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u enabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENS_C;
- else
- val = ARMV7_INTENS_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
return idx;
}
-static inline u32 armv7_pmnc_disable_intens(unsigned int idx)
+static inline int armv7_pmnc_disable_intens(int idx)
{
- u32 val;
+ u32 counter;
- if ((idx != ARMV7_CYCLE_COUNTER) &&
- ((idx < ARMV7_COUNTER0) || (idx > ARMV7_COUNTER_LAST))) {
- pr_err("CPU%u disabling wrong PMNC counter"
- " interrupt enable %d\n", smp_processor_id(), idx);
- return -1;
+ if (!armv7_pmnc_counter_valid(idx)) {
+ pr_err("CPU%u disabling wrong PMNC counter IRQ enable %d\n",
+ smp_processor_id(), idx);
+ return -EINVAL;
}
- if (idx == ARMV7_CYCLE_COUNTER)
- val = ARMV7_INTENC_C;
- else
- val = ARMV7_INTENC_P(idx);
-
- asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (val));
-
+ counter = ARMV7_IDX_TO_COUNTER(idx);
+ asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
return idx;
}
@@ -973,14 +921,14 @@
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
printk(KERN_INFO "CCNT =0x%08x\n", val);
- for (cnt = ARMV7_COUNTER0; cnt < ARMV7_COUNTER_LAST; cnt++) {
+ for (cnt = ARMV7_IDX_COUNTER0; cnt <= ARMV7_IDX_COUNTER_LAST; cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
printk(KERN_INFO "CNT[%d] count =0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
- cnt-ARMV7_EVENT_CNT_TO_CNTx, val);
+ ARMV7_IDX_TO_COUNTER(cnt), val);
}
}
#endif
@@ -988,12 +936,13 @@
static void armv7pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Enable counter and interrupt, and set the counter to count
* the event that we're interested in.
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1002,9 +951,10 @@
/*
* Set event (if destined for PMNx counters)
- * We don't need to set the event if it's a cycle count
+ * We only need to set the event for the cycle counter if we
+ * have the ability to perform event filtering.
*/
- if (idx != ARMV7_CYCLE_COUNTER)
+ if (armv7pmu.set_event_filter || idx != ARMV7_IDX_CYCLE_COUNTER)
armv7_pmnc_write_evtsel(idx, hwc->config_base);
/*
@@ -1017,17 +967,18 @@
*/
armv7_pmnc_enable_counter(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
/*
* Disable counter and interrupt
*/
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/*
* Disable counter
@@ -1039,14 +990,14 @@
*/
armv7_pmnc_disable_intens(idx);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev)
{
- unsigned long pmnc;
+ u32 pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -1069,13 +1020,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
/*
* We have a single interrupt for all counters. Check that
* each counter has overflowed before we process it.
@@ -1090,7 +1038,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
/*
@@ -1108,61 +1056,114 @@
static void armv7pmu_start(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
armv7_pmnc_write(armv7_pmnc_read() | ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void armv7pmu_stop(void)
{
unsigned long flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
armv7_pmnc_write(armv7_pmnc_read() & ~ARMV7_PMNC_E);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
-static int armv7pmu_get_event_idx(struct cpu_hw_events *cpuc,
+static int armv7pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx;
+ unsigned long evtype = event->config_base & ARMV7_EVTYPE_EVENT;
/* Always place a cycle counter into the cycle counter. */
- if (event->config_base == ARMV7_PERFCTR_CPU_CYCLES) {
- if (test_and_set_bit(ARMV7_CYCLE_COUNTER, cpuc->used_mask))
+ if (evtype == ARMV7_PERFCTR_CPU_CYCLES) {
+ if (test_and_set_bit(ARMV7_IDX_CYCLE_COUNTER, cpuc->used_mask))
return -EAGAIN;
- return ARMV7_CYCLE_COUNTER;
- } else {
- /*
- * For anything other than a cycle counter, try and use
- * the events counters
- */
- for (idx = ARMV7_COUNTER0; idx <= armpmu->num_events; ++idx) {
- if (!test_and_set_bit(idx, cpuc->used_mask))
- return idx;
- }
-
- /* The counters are all in use. */
- return -EAGAIN;
+ return ARMV7_IDX_CYCLE_COUNTER;
}
+
+ /*
+ * For anything other than a cycle counter, try and use
+ * the events counters
+ */
+ for (idx = ARMV7_IDX_COUNTER0; idx < cpu_pmu->num_events; ++idx) {
+ if (!test_and_set_bit(idx, cpuc->used_mask))
+ return idx;
+ }
+
+ /* The counters are all in use. */
+ return -EAGAIN;
+}
+
+/*
+ * Add an event filter to a given event. This will only work for PMUv2 PMUs.
+ */
+static int armv7pmu_set_event_filter(struct hw_perf_event *event,
+ struct perf_event_attr *attr)
+{
+ unsigned long config_base = 0;
+
+ if (attr->exclude_idle)
+ return -EPERM;
+ if (attr->exclude_user)
+ config_base |= ARMV7_EXCLUDE_USER;
+ if (attr->exclude_kernel)
+ config_base |= ARMV7_EXCLUDE_PL1;
+ if (!attr->exclude_hv)
+ config_base |= ARMV7_INCLUDE_HYP;
+
+ /*
+ * Install the filter into config_base as this is used to
+ * construct the event type.
+ */
+ event->config_base = config_base;
+
+ return 0;
}
static void armv7pmu_reset(void *info)
{
- u32 idx, nb_cnt = armpmu->num_events;
+ u32 idx, nb_cnt = cpu_pmu->num_events;
/* The counter and interrupt enable registers are unknown at reset. */
- for (idx = 1; idx < nb_cnt; ++idx)
+ for (idx = ARMV7_IDX_CYCLE_COUNTER; idx < nb_cnt; ++idx)
armv7pmu_disable_event(NULL, idx);
/* Initialize & Reset PMNC: C and P bits */
armv7_pmnc_write(ARMV7_PMNC_P | ARMV7_PMNC_C);
}
+static int armv7_a8_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a8_perf_map,
+ &armv7_a8_perf_cache_map, 0xFF);
+}
+
+static int armv7_a9_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a9_perf_map,
+ &armv7_a9_perf_cache_map, 0xFF);
+}
+
+static int armv7_a5_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a5_perf_map,
+ &armv7_a5_perf_cache_map, 0xFF);
+}
+
+static int armv7_a15_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &armv7_a15_perf_map,
+ &armv7_a15_perf_cache_map, 0xFF);
+}
+
static struct arm_pmu armv7pmu = {
.handle_irq = armv7pmu_handle_irq,
.enable = armv7pmu_enable_event,
@@ -1173,7 +1174,6 @@
.start = armv7pmu_start,
.stop = armv7pmu_stop,
.reset = armv7pmu_reset,
- .raw_event_mask = 0xFF,
.max_period = (1LLU << 32) - 1,
};
@@ -1188,62 +1188,59 @@
return nb_cnt + 1;
}
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA8;
armv7pmu.name = "ARMv7 Cortex-A8";
- armv7pmu.cache_map = &armv7_a8_perf_cache_map;
- armv7pmu.event_map = &armv7_a8_perf_map;
+ armv7pmu.map_event = armv7_a8_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA9;
armv7pmu.name = "ARMv7 Cortex-A9";
- armv7pmu.cache_map = &armv7_a9_perf_cache_map;
- armv7pmu.event_map = &armv7_a9_perf_map;
+ armv7pmu.map_event = armv7_a9_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA5;
armv7pmu.name = "ARMv7 Cortex-A5";
- armv7pmu.cache_map = &armv7_a5_perf_cache_map;
- armv7pmu.event_map = &armv7_a5_perf_map;
+ armv7pmu.map_event = armv7_a5_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
return &armv7pmu;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
armv7pmu.id = ARM_PERF_PMU_ID_CA15;
armv7pmu.name = "ARMv7 Cortex-A15";
- armv7pmu.cache_map = &armv7_a15_perf_cache_map;
- armv7pmu.event_map = &armv7_a15_perf_map;
+ armv7pmu.map_event = armv7_a15_map_event;
armv7pmu.num_events = armv7_read_num_pmnc_events();
+ armv7pmu.set_event_filter = armv7pmu_set_event_filter;
return &armv7pmu;
}
#else
-static const struct arm_pmu *__init armv7_a8_pmu_init(void)
+static struct arm_pmu *__init armv7_a8_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a9_pmu_init(void)
+static struct arm_pmu *__init armv7_a9_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a5_pmu_init(void)
+static struct arm_pmu *__init armv7_a5_pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init armv7_a15_pmu_init(void)
+static struct arm_pmu *__init armv7_a15_pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c
index 3c43974..e0cca10 100644
--- a/arch/arm/kernel/perf_event_xscale.c
+++ b/arch/arm/kernel/perf_event_xscale.c
@@ -40,7 +40,7 @@
};
enum xscale_counters {
- XSCALE_CYCLE_COUNTER = 1,
+ XSCALE_CYCLE_COUNTER = 0,
XSCALE_COUNTER0,
XSCALE_COUNTER1,
XSCALE_COUNTER2,
@@ -222,7 +222,7 @@
{
unsigned long pmnc;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -249,13 +249,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale1_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -266,7 +263,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -284,6 +281,7 @@
xscale1pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -305,18 +303,19 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long val, mask, evt, flags;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
switch (idx) {
case XSCALE_CYCLE_COUNTER:
@@ -336,16 +335,16 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~mask;
val |= evt;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale1pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale1pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
if (XSCALE_PERFCTR_CCNT == event->config_base) {
@@ -368,24 +367,26 @@
xscale1pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val |= XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale1pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale1pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -424,7 +425,13 @@
}
}
-static const struct arm_pmu xscale1pmu = {
+static int xscale_map_event(struct perf_event *event)
+{
+ return map_cpu_event(event, &xscale_perf_map,
+ &xscale_perf_cache_map, 0xFF);
+}
+
+static struct arm_pmu xscale1pmu = {
.id = ARM_PERF_PMU_ID_XSCALE1,
.name = "xscale1",
.handle_irq = xscale1pmu_handle_irq,
@@ -435,14 +442,12 @@
.get_event_idx = xscale1pmu_get_event_idx,
.start = xscale1pmu_start,
.stop = xscale1pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 3,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return &xscale1pmu;
}
@@ -560,7 +565,7 @@
{
unsigned long pmnc, of_flags;
struct perf_sample_data data;
- struct cpu_hw_events *cpuc;
+ struct pmu_hw_events *cpuc;
struct pt_regs *regs;
int idx;
@@ -581,13 +586,10 @@
perf_sample_data_init(&data, 0);
cpuc = &__get_cpu_var(cpu_hw_events);
- for (idx = 0; idx <= armpmu->num_events; ++idx) {
+ for (idx = 0; idx < cpu_pmu->num_events; ++idx) {
struct perf_event *event = cpuc->events[idx];
struct hw_perf_event *hwc;
- if (!test_bit(idx, cpuc->active_mask))
- continue;
-
if (!xscale2_pmnc_counter_has_overflowed(pmnc, idx))
continue;
@@ -598,7 +600,7 @@
continue;
if (perf_event_overflow(event, &data, regs))
- armpmu->disable(hwc, idx);
+ cpu_pmu->disable(hwc, idx);
}
irq_work_run();
@@ -616,6 +618,7 @@
xscale2pmu_enable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -649,16 +652,17 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_disable_event(struct hw_perf_event *hwc, int idx)
{
unsigned long flags, ien, evtsel;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
ien = xscale2pmu_read_int_enable();
evtsel = xscale2pmu_read_event_select();
@@ -692,14 +696,14 @@
return;
}
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
xscale2pmu_write_event_select(evtsel);
xscale2pmu_write_int_enable(ien);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static int
-xscale2pmu_get_event_idx(struct cpu_hw_events *cpuc,
+xscale2pmu_get_event_idx(struct pmu_hw_events *cpuc,
struct hw_perf_event *event)
{
int idx = xscale1pmu_get_event_idx(cpuc, event);
@@ -718,24 +722,26 @@
xscale2pmu_start(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
val |= XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static void
xscale2pmu_stop(void)
{
unsigned long flags, val;
+ struct pmu_hw_events *events = cpu_pmu->get_hw_events();
- raw_spin_lock_irqsave(&pmu_lock, flags);
+ raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc();
val &= ~XSCALE_PMU_ENABLE;
xscale2pmu_write_pmnc(val);
- raw_spin_unlock_irqrestore(&pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
}
static inline u32
@@ -786,7 +792,7 @@
}
}
-static const struct arm_pmu xscale2pmu = {
+static struct arm_pmu xscale2pmu = {
.id = ARM_PERF_PMU_ID_XSCALE2,
.name = "xscale2",
.handle_irq = xscale2pmu_handle_irq,
@@ -797,24 +803,22 @@
.get_event_idx = xscale2pmu_get_event_idx,
.start = xscale2pmu_start,
.stop = xscale2pmu_stop,
- .cache_map = &xscale_perf_cache_map,
- .event_map = &xscale_perf_map,
- .raw_event_mask = 0xFF,
+ .map_event = xscale_map_event,
.num_events = 5,
.max_period = (1LLU << 32) - 1,
};
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return &xscale2pmu;
}
#else
-static const struct arm_pmu *__init xscale1pmu_init(void)
+static struct arm_pmu *__init xscale1pmu_init(void)
{
return NULL;
}
-static const struct arm_pmu *__init xscale2pmu_init(void)
+static struct arm_pmu *__init xscale2pmu_init(void)
{
return NULL;
}
diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c
index c53474f..2c3407e 100644
--- a/arch/arm/kernel/pmu.c
+++ b/arch/arm/kernel/pmu.c
@@ -10,192 +10,26 @@
*
*/
-#define pr_fmt(fmt) "PMU: " fmt
-
-#include <linux/cpumask.h>
#include <linux/err.h>
-#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/of_device.h>
-#include <linux/platform_device.h>
#include <asm/pmu.h>
-static volatile long pmu_lock;
+/*
+ * PMU locking to ensure mutual exclusion between different subsystems.
+ */
+static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)];
-static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES];
-
-static int __devinit pmu_register(struct platform_device *pdev,
- enum arm_pmu_type type)
-{
- if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
- pr_warning("received registration request for unknown "
- "PMU device type %d\n", type);
- return -EINVAL;
- }
-
- if (pmu_devices[type]) {
- pr_warning("rejecting duplicate registration of PMU device "
- "type %d.", type);
- return -ENOSPC;
- }
-
- pr_info("registered new PMU device of type %d\n", type);
- pmu_devices[type] = pdev;
- return 0;
-}
-
-#define OF_MATCH_PMU(_name, _type) { \
- .compatible = _name, \
- .data = (void *)_type, \
-}
-
-#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU)
-
-static struct of_device_id armpmu_of_device_ids[] = {
- OF_MATCH_CPU("arm,cortex-a9-pmu"),
- OF_MATCH_CPU("arm,cortex-a8-pmu"),
- OF_MATCH_CPU("arm,arm1136-pmu"),
- OF_MATCH_CPU("arm,arm1176-pmu"),
- {},
-};
-
-#define PLAT_MATCH_PMU(_name, _type) { \
- .name = _name, \
- .driver_data = _type, \
-}
-
-#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU)
-
-static struct platform_device_id armpmu_plat_device_ids[] = {
- PLAT_MATCH_CPU("arm-pmu"),
- {},
-};
-
-enum arm_pmu_type armpmu_device_type(struct platform_device *pdev)
-{
- const struct of_device_id *of_id;
- const struct platform_device_id *pdev_id;
-
- /* provided by of_device_id table */
- if (pdev->dev.of_node) {
- of_id = of_match_device(armpmu_of_device_ids, &pdev->dev);
- BUG_ON(!of_id);
- return (enum arm_pmu_type)of_id->data;
- }
-
- /* Provided by platform_device_id table */
- pdev_id = platform_get_device_id(pdev);
- BUG_ON(!pdev_id);
- return pdev_id->driver_data;
-}
-
-static int __devinit armpmu_device_probe(struct platform_device *pdev)
-{
- return pmu_register(pdev, armpmu_device_type(pdev));
-}
-
-static struct platform_driver armpmu_driver = {
- .driver = {
- .name = "arm-pmu",
- .of_match_table = armpmu_of_device_ids,
- },
- .probe = armpmu_device_probe,
- .id_table = armpmu_plat_device_ids,
-};
-
-static int __init register_pmu_driver(void)
-{
- return platform_driver_register(&armpmu_driver);
-}
-device_initcall(register_pmu_driver);
-
-struct platform_device *
+int
reserve_pmu(enum arm_pmu_type type)
{
- struct platform_device *pdev;
-
- if (test_and_set_bit_lock(type, &pmu_lock)) {
- pdev = ERR_PTR(-EBUSY);
- } else if (pmu_devices[type] == NULL) {
- clear_bit_unlock(type, &pmu_lock);
- pdev = ERR_PTR(-ENODEV);
- } else {
- pdev = pmu_devices[type];
- }
-
- return pdev;
+ return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0;
}
EXPORT_SYMBOL_GPL(reserve_pmu);
-int
+void
release_pmu(enum arm_pmu_type type)
{
- if (WARN_ON(!pmu_devices[type]))
- return -EINVAL;
- clear_bit_unlock(type, &pmu_lock);
- return 0;
+ clear_bit_unlock(type, pmu_lock);
}
-EXPORT_SYMBOL_GPL(release_pmu);
-
-static int
-set_irq_affinity(int irq,
- unsigned int cpu)
-{
-#ifdef CONFIG_SMP
- int err = irq_set_affinity(irq, cpumask_of(cpu));
- if (err)
- pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n",
- irq, cpu);
- return err;
-#else
- return -EINVAL;
-#endif
-}
-
-static int
-init_cpu_pmu(void)
-{
- int i, irqs, err = 0;
- struct platform_device *pdev = pmu_devices[ARM_PMU_DEVICE_CPU];
-
- if (!pdev)
- return -ENODEV;
-
- irqs = pdev->num_resources;
-
- /*
- * If we have a single PMU interrupt that we can't shift, assume that
- * we're running on a uniprocessor machine and continue.
- */
- if (irqs == 1 && !irq_can_set_affinity(platform_get_irq(pdev, 0)))
- return 0;
-
- for (i = 0; i < irqs; ++i) {
- err = set_irq_affinity(platform_get_irq(pdev, i), i);
- if (err)
- break;
- }
-
- return err;
-}
-
-int
-init_pmu(enum arm_pmu_type type)
-{
- int err = 0;
-
- switch (type) {
- case ARM_PMU_DEVICE_CPU:
- err = init_cpu_pmu();
- break;
- default:
- pr_warning("attempt to initialise PMU of unknown "
- "type %d\n", type);
- err = -EINVAL;
- }
-
- return err;
-}
-EXPORT_SYMBOL_GPL(init_pmu);
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index e514c76..6136144 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -820,25 +820,8 @@
if (__atags_pointer)
tags = phys_to_virt(__atags_pointer);
- else if (mdesc->boot_params) {
-#ifdef CONFIG_MMU
- /*
- * We still are executing with a minimal MMU mapping created
- * with the presumption that the machine default for this
- * is located in the first MB of RAM. Anything else will
- * fault and silently hang the kernel at this point.
- */
- if (mdesc->boot_params < PHYS_OFFSET ||
- mdesc->boot_params >= PHYS_OFFSET + SZ_1M) {
- printk(KERN_WARNING
- "Default boot params at physical 0x%08lx out of reach\n",
- mdesc->boot_params);
- } else
-#endif
- {
- tags = phys_to_virt(mdesc->boot_params);
- }
- }
+ else if (mdesc->atag_offset)
+ tags = (void *)(PAGE_OFFSET + mdesc->atag_offset);
#if defined(CONFIG_DEPRECATED_PARAM_STRUCT)
/*
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index dc902f2..020e99c 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -8,92 +8,61 @@
.text
/*
- * Save CPU state for a suspend
- * r1 = v:p offset
- * r2 = suspend function arg0
- * r3 = suspend function
+ * Save CPU state for a suspend. This saves the CPU general purpose
+ * registers, and allocates space on the kernel stack to save the CPU
+ * specific registers and some other data for resume.
+ * r0 = suspend function arg0
+ * r1 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
#ifdef MULTI_CPU
ldr r10, =processor
- ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
- ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function
+ ldr r4, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
#else
- ldr r5, =cpu_suspend_size
- ldr ip, =cpu_do_resume
+ ldr r4, =cpu_suspend_size
#endif
- mov r6, sp @ current virtual SP
- sub sp, sp, r5 @ allocate CPU state on stack
- mov r0, sp @ save pointer to CPU save block
- add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn
- ldr r5, =sleep_save_sp
- add r6, sp, r1 @ convert SP to phys
- stmfd sp!, {r2, r3} @ save suspend func arg and pointer
+ mov r5, sp @ current virtual SP
+ add r4, r4, #12 @ Space for pgd, virt sp, phys resume fn
+ sub sp, sp, r4 @ allocate CPU state on stack
+ stmfd sp!, {r0, r1} @ save suspend func arg and pointer
+ add r0, sp, #8 @ save pointer to save block
+ mov r1, r4 @ size of save block
+ mov r2, r5 @ virtual SP
+ ldr r3, =sleep_save_sp
#ifdef CONFIG_SMP
ALT_SMP(mrc p15, 0, lr, c0, c0, 5)
ALT_UP(mov lr, #0)
and lr, lr, #15
- str r6, [r5, lr, lsl #2] @ save phys SP
-#else
- str r6, [r5] @ save phys SP
+ add r3, r3, lr, lsl #2
#endif
-#ifdef MULTI_CPU
- mov lr, pc
- ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state
-#else
- bl cpu_do_suspend
-#endif
-
- @ flush data cache
-#ifdef MULTI_CACHE
- ldr r10, =cpu_cache
- mov lr, pc
- ldr pc, [r10, #CACHE_FLUSH_KERN_ALL]
-#else
- bl __cpuc_flush_kern_all
-#endif
+ bl __cpu_suspend_save
adr lr, BSYM(cpu_suspend_abort)
ldmfd sp!, {r0, pc} @ call suspend fn
ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
- ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn
+ ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
+ teq r0, #0
+ moveq r0, #1 @ force non-zero value
mov sp, r2
ldmfd sp!, {r4 - r11, pc}
ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
*/
-ENTRY(cpu_resume_mmu)
- adr r4, cpu_resume_turn_mmu_on
- mov r4, r4, lsr #20
- orr r3, r3, r4, lsl #20
- ldr r5, [r2, r4, lsl #2] @ save old mapping
- str r3, [r2, r4, lsl #2] @ setup 1:1 mapping for mmu code
- sub r2, r2, r1
- ldr r3, =cpu_resume_after_mmu
- bic r1, r0, #CR_C @ ensure D-cache is disabled
- b cpu_resume_turn_mmu_on
-ENDPROC(cpu_resume_mmu)
- .ltorg
.align 5
-cpu_resume_turn_mmu_on:
- mcr p15, 0, r1, c1, c0, 0 @ turn on MMU, I-cache, etc
- mrc p15, 0, r1, c0, c0, 0 @ read id reg
- mov r1, r1
- mov r1, r1
+ENTRY(cpu_resume_mmu)
+ ldr r3, =cpu_resume_after_mmu
+ mcr p15, 0, r0, c1, c0, 0 @ turn on MMU, I-cache, etc
+ mrc p15, 0, r0, c0, c0, 0 @ read id reg
+ mov r0, r0
+ mov r0, r0
mov pc, r3 @ jump to virtual address
-ENDPROC(cpu_resume_turn_mmu_on)
+ENDPROC(cpu_resume_mmu)
cpu_resume_after_mmu:
- str r5, [r2, r4, lsl #2] @ restore old mapping
- mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache
bl cpu_init @ restore the und/abt/irq banked regs
mov r0, #0 @ return zero on success
ldmfd sp!, {r4 - r11, pc}
@@ -119,7 +88,7 @@
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
- @ load v:p, stack, resume fn
+ @ load phys pgd, stack, resume fn
ARM( ldmia r0!, {r1, sp, pc} )
THUMB( ldmia r0!, {r1, r2, r3} )
THUMB( mov sp, r2 )
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index d88ff02..a96c08c 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -16,7 +16,6 @@
#include <linux/cache.h>
#include <linux/profile.h>
#include <linux/errno.h>
-#include <linux/ftrace.h>
#include <linux/mm.h>
#include <linux/err.h>
#include <linux/cpu.h>
@@ -31,6 +30,8 @@
#include <asm/cacheflush.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
+#include <asm/exception.h>
+#include <asm/topology.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
@@ -39,6 +40,7 @@
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
+#include <asm/smp_plat.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
@@ -259,6 +261,20 @@
}
#endif /* CONFIG_HOTPLUG_CPU */
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+ int i;
+ u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+ cpu_logical_map(0) = cpu;
+ for (i = 1; i < NR_CPUS; ++i)
+ cpu_logical_map(i) = i == cpu ? 0 : i;
+
+ printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.
@@ -268,6 +284,8 @@
struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid);
cpu_info->loops_per_jiffy = loops_per_jiffy;
+
+ store_cpu_topology(cpuid);
}
/*
@@ -358,6 +376,8 @@
{
unsigned int ncores = num_possible_cpus();
+ init_cpu_topology();
+
smp_store_cpu_info(smp_processor_id());
/*
@@ -437,10 +457,6 @@
for (i = 0; i < NR_IPI; i++)
sum += __get_irq_stat(cpu, ipi_irqs[i]);
-#ifdef CONFIG_LOCAL_TIMERS
- sum += __get_irq_stat(cpu, local_timer_irqs);
-#endif
-
return sum;
}
@@ -457,33 +473,6 @@
irq_exit();
}
-#ifdef CONFIG_LOCAL_TIMERS
-asmlinkage void __exception_irq_entry do_local_timer(struct pt_regs *regs)
-{
- struct pt_regs *old_regs = set_irq_regs(regs);
- int cpu = smp_processor_id();
-
- if (local_timer_ack()) {
- __inc_irq_stat(cpu, local_timer_irqs);
- ipi_timer();
- }
-
- set_irq_regs(old_regs);
-}
-
-void show_local_irqs(struct seq_file *p, int prec)
-{
- unsigned int cpu;
-
- seq_printf(p, "%*s: ", prec, "LOC");
-
- for_each_present_cpu(cpu)
- seq_printf(p, "%10u ", __get_irq_stat(cpu, local_timer_irqs));
-
- seq_printf(p, " Local timer interrupts\n");
-}
-#endif
-
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
static void smp_timer_broadcast(const struct cpumask *mask)
{
@@ -534,7 +523,7 @@
unsigned int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
- evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ local_timer_stop(evt);
}
#endif
@@ -567,6 +556,11 @@
*/
asmlinkage void __exception_irq_entry do_IPI(int ipinr, struct pt_regs *regs)
{
+ handle_IPI(ipinr, regs);
+}
+
+void handle_IPI(int ipinr, struct pt_regs *regs)
+{
unsigned int cpu = smp_processor_id();
struct pt_regs *old_regs = set_irq_regs(regs);
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 7fcddb7..8f5dd79 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -34,7 +34,7 @@
/*
* Enable the SCU
*/
-void __init scu_enable(void __iomem *scu_base)
+void scu_enable(void __iomem *scu_base)
{
u32 scu_ctrl;
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 01c1862..a8a6682 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
#include <asm/hardware/gic.h>
/* set up by the platform code */
@@ -26,6 +27,8 @@
static unsigned long twd_timer_rate;
+static struct clock_event_device __percpu **twd_evt;
+
static void twd_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk)
{
@@ -80,6 +83,12 @@
return 0;
}
+void twd_timer_stop(struct clock_event_device *clk)
+{
+ twd_set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ disable_percpu_irq(clk->irq);
+}
+
static void __cpuinit twd_calibrate_rate(void)
{
unsigned long count;
@@ -119,11 +128,43 @@
}
}
+static irqreturn_t twd_handler(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
+
+ if (twd_timer_ack()) {
+ evt->event_handler(evt);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
/*
* Setup the local clock events for a CPU.
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
+ struct clock_event_device **this_cpu_clk;
+
+ if (!twd_evt) {
+ int err;
+
+ twd_evt = alloc_percpu(struct clock_event_device *);
+ if (!twd_evt) {
+ pr_err("twd: can't allocate memory\n");
+ return;
+ }
+
+ err = request_percpu_irq(clk->irq, twd_handler,
+ "twd", twd_evt);
+ if (err) {
+ pr_err("twd: can't register interrupt %d (%d)\n",
+ clk->irq, err);
+ return;
+ }
+ }
+
twd_calibrate_rate();
clk->name = "local_timer";
@@ -137,8 +178,10 @@
clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+ this_cpu_clk = __this_cpu_ptr(twd_evt);
+ *this_cpu_clk = clk;
+
clockevents_register_device(clk);
- /* Make sure our local interrupt controller has this enabled */
- gic_enable_ppi(clk->irq);
+ enable_percpu_irq(clk->irq, 0);
}
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
new file mode 100644
index 0000000..93a22d2
--- /dev/null
+++ b/arch/arm/kernel/suspend.c
@@ -0,0 +1,72 @@
+#include <linux/init.h>
+
+#include <asm/pgalloc.h>
+#include <asm/pgtable.h>
+#include <asm/memory.h>
+#include <asm/suspend.h>
+#include <asm/tlbflush.h>
+
+static pgd_t *suspend_pgd;
+
+extern int __cpu_suspend(unsigned long, int (*)(unsigned long));
+extern void cpu_resume_mmu(void);
+
+/*
+ * This is called by __cpu_suspend() to save the state, and do whatever
+ * flushing is required to ensure that when the CPU goes to sleep we have
+ * the necessary data available when the caches are not searched.
+ */
+void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr)
+{
+ *save_ptr = virt_to_phys(ptr);
+
+ /* This must correspond to the LDM in cpu_resume() assembly */
+ *ptr++ = virt_to_phys(suspend_pgd);
+ *ptr++ = sp;
+ *ptr++ = virt_to_phys(cpu_do_resume);
+
+ cpu_do_suspend(ptr);
+
+ flush_cache_all();
+ outer_clean_range(*save_ptr, *save_ptr + ptrsz);
+ outer_clean_range(virt_to_phys(save_ptr),
+ virt_to_phys(save_ptr) + sizeof(*save_ptr));
+}
+
+/*
+ * Hide the first two arguments to __cpu_suspend - these are an implementation
+ * detail which platform code shouldn't have to know about.
+ */
+int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
+{
+ struct mm_struct *mm = current->active_mm;
+ int ret;
+
+ if (!suspend_pgd)
+ return -EINVAL;
+
+ /*
+ * Provide a temporary page table with an identity mapping for
+ * the MMU-enable code, required for resuming. On successful
+ * resume (indicated by a zero return code), we need to switch
+ * back to the correct page tables.
+ */
+ ret = __cpu_suspend(arg, fn);
+ if (ret == 0) {
+ cpu_switch_mm(mm->pgd, mm);
+ local_flush_tlb_all();
+ }
+
+ return ret;
+}
+
+static int __init cpu_suspend_init(void)
+{
+ suspend_pgd = pgd_alloc(&init_mm);
+ if (suspend_pgd) {
+ unsigned long addr = virt_to_phys(cpu_resume_mmu);
+ identity_mapping_add(suspend_pgd, addr, addr + SECTION_SIZE);
+ }
+ return suspend_pgd ? 0 : -ENOMEM;
+}
+core_initcall(cpu_suspend_init);
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
new file mode 100644
index 0000000..1040c00
--- /dev/null
+++ b/arch/arm/kernel/topology.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/kernel/topology.c
+ *
+ * Copyright (C) 2011 Linaro Limited.
+ * Written by: Vincent Guittot
+ *
+ * based on arch/sh/kernel/topology.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/cpu.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/percpu.h>
+#include <linux/node.h>
+#include <linux/nodemask.h>
+#include <linux/sched.h>
+
+#include <asm/cputype.h>
+#include <asm/topology.h>
+
+#define MPIDR_SMP_BITMASK (0x3 << 30)
+#define MPIDR_SMP_VALUE (0x2 << 30)
+
+#define MPIDR_MT_BITMASK (0x1 << 24)
+
+/*
+ * These masks reflect the current use of the affinity levels.
+ * The affinity level can be up to 16 bits according to ARM ARM
+ */
+
+#define MPIDR_LEVEL0_MASK 0x3
+#define MPIDR_LEVEL0_SHIFT 0
+
+#define MPIDR_LEVEL1_MASK 0xF
+#define MPIDR_LEVEL1_SHIFT 8
+
+#define MPIDR_LEVEL2_MASK 0xFF
+#define MPIDR_LEVEL2_SHIFT 16
+
+struct cputopo_arm cpu_topology[NR_CPUS];
+
+const struct cpumask *cpu_coregroup_mask(unsigned int cpu)
+{
+ return &cpu_topology[cpu].core_sibling;
+}
+
+/*
+ * store_cpu_topology is called at boot when only one cpu is running
+ * and with the mutex cpu_hotplug.lock locked, when several cpus have booted,
+ * which prevents simultaneous write access to cpu_topology array
+ */
+void store_cpu_topology(unsigned int cpuid)
+{
+ struct cputopo_arm *cpuid_topo = &cpu_topology[cpuid];
+ unsigned int mpidr;
+ unsigned int cpu;
+
+ /* If the cpu topology has been already set, just return */
+ if (cpuid_topo->core_id != -1)
+ return;
+
+ mpidr = read_cpuid_mpidr();
+
+ /* create cpu topology mapping */
+ if ((mpidr & MPIDR_SMP_BITMASK) == MPIDR_SMP_VALUE) {
+ /*
+ * This is a multiprocessor system
+ * multiprocessor format & multiprocessor mode field are set
+ */
+
+ if (mpidr & MPIDR_MT_BITMASK) {
+ /* core performance interdependency */
+ cpuid_topo->thread_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
+ & MPIDR_LEVEL0_MASK;
+ cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
+ & MPIDR_LEVEL1_MASK;
+ cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL2_SHIFT)
+ & MPIDR_LEVEL2_MASK;
+ } else {
+ /* largely independent cores */
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = (mpidr >> MPIDR_LEVEL0_SHIFT)
+ & MPIDR_LEVEL0_MASK;
+ cpuid_topo->socket_id = (mpidr >> MPIDR_LEVEL1_SHIFT)
+ & MPIDR_LEVEL1_MASK;
+ }
+ } else {
+ /*
+ * This is an uniprocessor system
+ * we are in multiprocessor format but uniprocessor system
+ * or in the old uniprocessor format
+ */
+ cpuid_topo->thread_id = -1;
+ cpuid_topo->core_id = 0;
+ cpuid_topo->socket_id = -1;
+ }
+
+ /* update core and thread sibling masks */
+ for_each_possible_cpu(cpu) {
+ struct cputopo_arm *cpu_topo = &cpu_topology[cpu];
+
+ if (cpuid_topo->socket_id == cpu_topo->socket_id) {
+ cpumask_set_cpu(cpuid, &cpu_topo->core_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu,
+ &cpuid_topo->core_sibling);
+
+ if (cpuid_topo->core_id == cpu_topo->core_id) {
+ cpumask_set_cpu(cpuid,
+ &cpu_topo->thread_sibling);
+ if (cpu != cpuid)
+ cpumask_set_cpu(cpu,
+ &cpuid_topo->thread_sibling);
+ }
+ }
+ }
+ smp_wmb();
+
+ printk(KERN_INFO "CPU%u: thread %d, cpu %d, socket %d, mpidr %x\n",
+ cpuid, cpu_topology[cpuid].thread_id,
+ cpu_topology[cpuid].core_id,
+ cpu_topology[cpuid].socket_id, mpidr);
+}
+
+/*
+ * init_cpu_topology is called at boot when only one cpu is running
+ * which prevent simultaneous write access to cpu_topology array
+ */
+void init_cpu_topology(void)
+{
+ unsigned int cpu;
+
+ /* init core mask */
+ for_each_possible_cpu(cpu) {
+ struct cputopo_arm *cpu_topo = &(cpu_topology[cpu]);
+
+ cpu_topo->thread_id = -1;
+ cpu_topo->core_id = -1;
+ cpu_topo->socket_id = -1;
+ cpumask_clear(&cpu_topo->core_sibling);
+ cpumask_clear(&cpu_topo->thread_sibling);
+ }
+ smp_wmb();
+}
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index bc9f9da..2103825 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -27,6 +27,7 @@
#include <linux/atomic.h>
#include <asm/cacheflush.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/unistd.h>
#include <asm/traps.h>
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index e04c5fb..1532b50 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/pm.h>
+#include <linux/dma-mapping.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
@@ -319,6 +320,7 @@
static void __init at91sam9g45_map_io(void)
{
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
+ init_consistent_dma_size(SZ_4M);
}
static void __init at91sam9g45_initialize(void)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index 2c611b9..406bb64 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -128,8 +128,6 @@
#define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */
#define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
/*
* DMA peripheral identifiers
* for hardware handshaking interface
diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S
index bc1e0b2..0ed8648 100644
--- a/arch/arm/mach-at91/include/mach/debug-macro.S
+++ b/arch/arm/mach-at91/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/at91_dbgu.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address)
ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address)
.endm
diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h
index ed78aab..6ae20a6 100644
--- a/arch/arm/mach-bcmring/include/mach/hardware.h
+++ b/arch/arm/mach-bcmring/include/mach/hardware.h
@@ -22,7 +22,6 @@
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
-#include <mach/memory.h>
#include <cfg_global.h>
#include <mach/csp/mm_io.h>
@@ -31,7 +30,7 @@
* *_SIZE is the size of the region
* *_BASE is the virtual address
*/
-#define RAM_START PLAT_PHYS_OFFSET
+#define RAM_START PHYS_OFFSET
#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED)
#define RAM_BASE PAGE_OFFSET
diff --git a/arch/arm/mach-bcmring/include/mach/memory.h b/arch/arm/mach-bcmring/include/mach/memory.h
deleted file mode 100644
index 15162e4..0000000
--- a/arch/arm/mach-bcmring/include/mach/memory.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*****************************************************************************
-* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved.
-*
-* Unless you and Broadcom execute a separate written software license
-* agreement governing use of this software, this software is licensed to you
-* under the terms of the GNU General Public License version 2, available at
-* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
-*
-* Notwithstanding the above, under no circumstances may you combine this
-* software in any way with any other Broadcom software provided under a
-* license other than the GPL, without Broadcom's express prior written
-* consent.
-*****************************************************************************/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <cfg_global.h>
-
-/*
- * Physical vs virtual RAM address space conversion. These are
- * private definitions which should NOT be used outside memory.h
- * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
- */
-
-#define PLAT_PHYS_OFFSET CFG_GLOBAL_RAM_BASE
-
-/*
- * Maximum DMA memory allowed is 14M
- */
-#define CONSISTENT_DMA_SIZE (SZ_16M - SZ_2M)
-
-#endif
diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c
index 0f1c37e..8616876 100644
--- a/arch/arm/mach-bcmring/mm.c
+++ b/arch/arm/mach-bcmring/mm.c
@@ -13,6 +13,7 @@
*****************************************************************************/
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/map.h>
#include <mach/hardware.h>
@@ -53,4 +54,6 @@
{
iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc));
+ /* Maximum DMA memory allowed is 14M */
+ init_consistent_dma_size(14 << 20);
}
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index 4a74b2c9..0276091 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -64,7 +64,7 @@
MACHINE_START(AUTCPU12, "autronix autcpu12")
/* Maintainer: Thomas Gleixner */
- .boot_params = 0xc0020000,
+ .atag_offset = 0x20000,
.map_io = autcpu12_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index 5a1689d..25b3bfd 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -55,7 +55,7 @@
MACHINE_START(CDB89712, "Cirrus-CDB89712")
/* Maintainer: Ray Lehtiniemi */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = cdb89712_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 16481cf..1df9ec6 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -56,7 +56,7 @@
MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame")
/* Maintainer: Rob Scott */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = ceiva_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,
diff --git a/arch/arm/mach-clps711x/clep7312.c b/arch/arm/mach-clps711x/clep7312.c
index 67b5abb4..06c8abd 100644
--- a/arch/arm/mach-clps711x/clep7312.c
+++ b/arch/arm/mach-clps711x/clep7312.c
@@ -37,7 +37,7 @@
MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x0100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/edb7211-arch.c b/arch/arm/mach-clps711x/edb7211-arch.c
index 98ca5b2..abf522d 100644
--- a/arch/arm/mach-clps711x/edb7211-arch.c
+++ b/arch/arm/mach-clps711x/edb7211-arch.c
@@ -57,7 +57,7 @@
MACHINE_START(EDB7211, "CL-EDB7211 (EP7211 eval board)")
/* Maintainer: Jon McClintock */
- .boot_params = 0xc0020100, /* 0xc0000000 - 0xc001ffff can be video RAM */
+ .atag_offset = 0x20100, /* 0xc0000000 - 0xc001ffff can be video RAM */
.fixup = fixup_edb7211,
.map_io = edb7211_map_io,
.reserve = edb7211_reserve,
diff --git a/arch/arm/mach-clps711x/fortunet.c b/arch/arm/mach-clps711x/fortunet.c
index b1cb479..b6f7d86 100644
--- a/arch/arm/mach-clps711x/fortunet.c
+++ b/arch/arm/mach-clps711x/fortunet.c
@@ -75,7 +75,6 @@
MACHINE_START(FORTUNET, "ARM-FortuNet")
/* Maintainer: FortuNet Inc. */
- .boot_params = 0x00000000,
.fixup = fortunet_fixup,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S
index 507c687..b802e8a 100644
--- a/arch/arm/mach-clps711x/include/mach/debug-macro.S
+++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <asm/hardware/clps7111.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifndef CONFIG_DEBUG_CLPS711X_UART2
mov \rp, #0x0000 @ UART1
#else
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index cefbce0..e7f75aeb 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -89,7 +89,7 @@
MACHINE_START(P720T, "ARM-Prospector720T")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_p720t,
.map_io = p720t_map_io,
.init_irq = clps711x_init_irq,
diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c
index 3e7d149..55f7b4b 100644
--- a/arch/arm/mach-cns3xxx/cns3420vb.c
+++ b/arch/arm/mach-cns3xxx/cns3420vb.c
@@ -197,7 +197,7 @@
}
MACHINE_START(CNS3420VB, "Cavium Networks CNS3420 Validation Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = cns3420_map_io,
.init_irq = cns3xxx_init_irq,
.timer = &cns3xxx_timer,
diff --git a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
index 56d8286..d04c150 100644
--- a/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
+++ b/arch/arm/mach-cns3xxx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #0x00009000
orr \rv, \rp, #0xf0000000 @ virtual base
orr \rp, \rp, #0x10000000
diff --git a/arch/arm/mach-cns3xxx/include/mach/memory.h b/arch/arm/mach-cns3xxx/include/mach/memory.h
deleted file mode 100644
index dc16c5c..0000000
--- a/arch/arm/mach-cns3xxx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * Copyright 2003 ARM Limited
- * Copyright 2008 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#define __phys_to_bus(x) ((x) + PHYS_OFFSET)
-#define __bus_to_phys(x) ((x) - PHYS_OFFSET)
-
-#define __virt_to_bus(v) __phys_to_bus(__virt_to_phys(v))
-#define __bus_to_virt(b) __phys_to_virt(__bus_to_phys(b))
-#define __pfn_to_bus(p) __phys_to_bus(__pfn_to_phys(p))
-#define __bus_to_pfn(b) __phys_to_pfn(__bus_to_phys(b))
-
-#endif
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 84fd786..26d94c0 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -676,7 +676,7 @@
}
MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da830_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 008d514..6e41cb5 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1291,7 +1291,7 @@
}
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = da850_evm_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 241a6bd..6556628 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -351,7 +351,7 @@
}
MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index bee284c..b307470 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -270,7 +270,7 @@
}
MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm355_leopard_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 9818f21..04c43ab 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -612,7 +612,7 @@
}
MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = dm365_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 95607a1..a005e769 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -712,7 +712,7 @@
MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_evm_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 993a3146..337c45e 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -792,7 +792,7 @@
}
MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
@@ -801,7 +801,7 @@
MACHINE_END
MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM")
- .boot_params = (0x80000100),
+ .atag_offset = 0x100,
.map_io = davinci_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index c278226..6efc84cc 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -566,7 +566,7 @@
}
MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = mityomapl138_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index d60a800..38d6f64 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -272,7 +272,7 @@
MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_ntosd2_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 237332a..c6701e4 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -338,7 +338,7 @@
}
MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard")
- .boot_params = (DA8XX_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = omapl138_hawk_map_io,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 5f4385c..5dd4da9 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -151,7 +151,7 @@
MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
/* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
- .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = davinci_sffsdr_map_io,
.init_irq = davinci_irq_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index 7828920..90ee7b5 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -277,7 +277,7 @@
#endif
MACHINE_START(TNETV107X, "TNETV107X EVM")
- .boot_params = (TNETV107X_DDR_BASE + 0x100),
+ .atag_offset = 0x100,
.map_io = tnetv107x_init,
.init_irq = cp_intc_init,
.timer = &davinci_timer,
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 1d25573..865ffe5 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -12,6 +12,7 @@
#include <linux/io.h>
#include <linux/etherdevice.h>
#include <linux/davinci_emac.h>
+#include <linux/dma-mapping.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
@@ -86,6 +87,8 @@
iotable_init(davinci_soc_info.io_desc,
davinci_soc_info.io_desc_num);
+ init_consistent_dma_size(14 << 20);
+
/*
* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
index bd59f31..0b314bf 100644
--- a/arch/arm/mach-davinci/cpuidle.c
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -19,7 +19,7 @@
#include <asm/proc-fns.h>
#include <mach/cpuidle.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#define DAVINCI_CPUIDLE_MAX_STATES 2
diff --git a/arch/arm/mach-davinci/include/mach/ddr2.h b/arch/arm/mach-davinci/include/mach/ddr2.h
new file mode 100644
index 0000000..c19e047
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/ddr2.h
@@ -0,0 +1,4 @@
+#define DDR2_SDRCR_OFFSET 0xc
+#define DDR2_SRPD_BIT (1 << 23)
+#define DDR2_MCLKSTOPEN_BIT (1 << 30)
+#define DDR2_LPMODEN_BIT (1 << 31)
diff --git a/arch/arm/mach-davinci/include/mach/debug-macro.S b/arch/arm/mach-davinci/include/mach/debug-macro.S
index f8b7ea4..cf94552 100644
--- a/arch/arm/mach-davinci/include/mach/debug-macro.S
+++ b/arch/arm/mach-davinci/include/mach/debug-macro.S
@@ -18,56 +18,50 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <mach/serial.h>
#define UART_SHIFT 2
-#define davinci_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define davinci_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
davinci_uart_phys: .word 0
davinci_uart_virt: .word 0
.popsection
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use davinci_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rp, =davinci_uart_phys
- add \rv, \rp, #4 @ davinci_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ davinci_uart_phys
+ ldr \rv, [\tmp, #4] @ davinci_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART address set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
+ and \rp, pc, #0xff000000
+ ldr \rv, =DAVINCI_UART_INFO_OFS
+ add \rp, \rp, \rv
/* Copy uart phys address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_phys)
- ldrne \rv, =davinci_uart_phys
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #0]
- str \rp, [\rv]
+ ldr \rv, [\rp, #0]
+ str \rv, [\tmp, #0]
/* Copy uart virt address from decompressor uart info */
- ldreq \rv, =davinci_uart_v2p(davinci_uart_virt)
- ldrne \rv, =davinci_uart_virt
- ldreq \rp, =DAVINCI_UART_INFO
- ldrne \rp, =davinci_uart_p2v(DAVINCI_UART_INFO)
- ldr \rp, [\rp, #4]
- str \rp, [\rv]
+ ldr \rv, [\rp, #4]
+ str \rv, [\tmp, #4]
b 10b
-99:
+
+ .align
+99: .word .
+ .word davinci_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h
deleted file mode 100644
index 7873194..0000000
--- a/arch/arm/mach-davinci/include/mach/memory.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * DaVinci memory space definitions
- *
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
- *
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/**************************************************************************
- * Included Files
- **************************************************************************/
-#include <asm/page.h>
-#include <asm/sizes.h>
-
-/**************************************************************************
- * Definitions
- **************************************************************************/
-#define DAVINCI_DDR_BASE 0x80000000
-#define DA8XX_DDR_BASE 0xc0000000
-
-#if defined(CONFIG_ARCH_DAVINCI_DA8XX) && defined(CONFIG_ARCH_DAVINCI_DMx)
-#error Cannot enable DaVinci and DA8XX platforms concurrently
-#elif defined(CONFIG_ARCH_DAVINCI_DA8XX)
-#define PLAT_PHYS_OFFSET DA8XX_DDR_BASE
-#else
-#define PLAT_PHYS_OFFSET DAVINCI_DDR_BASE
-#endif
-
-#define DDR2_SDRCR_OFFSET 0xc
-#define DDR2_SRPD_BIT BIT(23)
-#define DDR2_MCLKSTOPEN_BIT BIT(30)
-#define DDR2_LPMODEN_BIT BIT(31)
-
-/*
- * Increase size of DMA-consistent memory region
- */
-#define CONSISTENT_DMA_SIZE (14<<20)
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index c9e6ce1..e347d88 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -21,8 +21,9 @@
* macros in debug-macro.S.
*
* This area sits just below the page tables (see arch/arm/kernel/head.S).
+ * We define it as a relative offset from start of usable RAM.
*/
-#define DAVINCI_UART_INFO (PLAT_PHYS_OFFSET + 0x3ff8)
+#define DAVINCI_UART_INFO_OFS 0x3ff8
#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index 78d8068..9dc7cf9 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -43,7 +43,12 @@
static inline void set_uart_info(u32 phys, void * __iomem virt)
{
- u32 *uart_info = (u32 *)(DAVINCI_UART_INFO);
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + DAVINCI_UART_INFO_OFS);
uart = (u32 *)phys;
uart_info[0] = phys;
diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S
index 5f1e045..d4e9316 100644
--- a/arch/arm/mach-davinci/sleep.S
+++ b/arch/arm/mach-davinci/sleep.S
@@ -22,7 +22,7 @@
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/psc.h>
-#include <mach/memory.h>
+#include <mach/ddr2.h>
#include "clock.h"
diff --git a/arch/arm/mach-dove/cm-a510.c b/arch/arm/mach-dove/cm-a510.c
index 03e11f9..c8a406f 100644
--- a/arch/arm/mach-dove/cm-a510.c
+++ b/arch/arm/mach-dove/cm-a510.c
@@ -87,7 +87,7 @@
}
MACHINE_START(CM_A510, "Compulab CM-A510 Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = cm_a510_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
index 2ac34ec..11ea34e 100644
--- a/arch/arm/mach-dove/dove-db-setup.c
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -94,7 +94,7 @@
}
MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dove_db_init,
.map_io = dove_map_io,
.init_early = dove_init_early,
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
index da8bf2b..5929cbc 100644
--- a/arch/arm/mach-dove/include/mach/debug-macro.S
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =DOVE_SB_REGS_PHYS_BASE
ldr \rv, =DOVE_SB_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
deleted file mode 100644
index bbc93fe..0000000
--- a/arch/arm/mach-dove/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-dove/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 087bc77..d0ce8ab 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -280,7 +280,7 @@
MACHINE_START(EBSA110, "EBSA110")
/* Maintainer: Russell King */
- .boot_params = 0x00000400,
+ .atag_offset = 0x400,
.reserve_lp0 = 1,
.reserve_lp2 = 1,
.soft_reboot = 1,
diff --git a/arch/arm/mach-ebsa110/include/mach/debug-macro.S b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
index 7ef5690..bb02c05 100644
--- a/arch/arm/mach-ebsa110/include/mach/debug-macro.S
+++ b/arch/arm/mach-ebsa110/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
**/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xf0000000
orr \rp, \rp, #0x00000be0
mov \rp, \rv
diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c
index 61b98ce..0713448 100644
--- a/arch/arm/mach-ep93xx/adssphere.c
+++ b/arch/arm/mach-ep93xx/adssphere.c
@@ -33,7 +33,7 @@
MACHINE_START(ADSSPHERE, "ADS Sphere board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 3f320c6..c63a5ec 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -241,7 +241,7 @@
#ifdef CONFIG_MACH_EDB9301
MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -252,7 +252,7 @@
#ifdef CONFIG_MACH_EDB9302
MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
/* Maintainer: George Kashperko <george@chas.com.ua> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -263,7 +263,7 @@
#ifdef CONFIG_MACH_EDB9302A
MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -274,7 +274,7 @@
#ifdef CONFIG_MACH_EDB9307
MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -285,7 +285,7 @@
#ifdef CONFIG_MACH_EDB9307A
MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -296,7 +296,7 @@
#ifdef CONFIG_MACH_EDB9312
MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
/* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -307,7 +307,7 @@
#ifdef CONFIG_MACH_EDB9315
MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -318,7 +318,7 @@
#ifdef CONFIG_MACH_EDB9315A
MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c
index 9bd3152..45ee205 100644
--- a/arch/arm/mach-ep93xx/gesbc9312.c
+++ b/arch/arm/mach-ep93xx/gesbc9312.c
@@ -33,7 +33,7 @@
MACHINE_START(GESBC9312, "Glomation GESBC-9312-sx")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/include/mach/debug-macro.S b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
index b25bc907..af54e43 100644
--- a/arch/arm/mach-ep93xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ep93xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/ep93xx-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =EP93XX_APB_PHYS_BASE @ Physical base
ldr \rv, =EP93XX_APB_VIRT_BASE @ virtual base
orr \rp, \rp, #0x000c0000
diff --git a/arch/arm/mach-ep93xx/micro9.c b/arch/arm/mach-ep93xx/micro9.c
index 7adea62..e72f736 100644
--- a/arch/arm/mach-ep93xx/micro9.c
+++ b/arch/arm/mach-ep93xx/micro9.c
@@ -77,7 +77,7 @@
#ifdef CONFIG_MACH_MICRO9H
MACHINE_START(MICRO9, "Contec Micro9-High")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -88,7 +88,7 @@
#ifdef CONFIG_MACH_MICRO9M
MACHINE_START(MICRO9M, "Contec Micro9-Mid")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -99,7 +99,7 @@
#ifdef CONFIG_MACH_MICRO9L
MACHINE_START(MICRO9L, "Contec Micro9-Lite")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
@@ -110,7 +110,7 @@
#ifdef CONFIG_MACH_MICRO9S
MACHINE_START(MICRO9S, "Contec Micro9-Slim")
/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 1a472ff..d6f286b 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -65,8 +65,8 @@
}
MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board")
-/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ /* Maintainer: Ryan Mallon */
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 4f4b0b2..2b4d4b0 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -163,7 +163,7 @@
MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15")
/* Maintainer: Ryan Mallon */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = ep93xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c
index c2d2cf4..1ade3c3 100644
--- a/arch/arm/mach-ep93xx/ts72xx.c
+++ b/arch/arm/mach-ep93xx/ts72xx.c
@@ -257,7 +257,7 @@
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .atag_offset = 0x100,
.map_io = ts72xx_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 10f6488..d96e4db 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -356,7 +356,7 @@
MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .atag_offset = 0x100,
.map_io = vision_map_io,
.init_irq = ep93xx_init_irq,
.timer = &ep93xx_timer,
diff --git a/arch/arm/mach-exynos4/include/mach/debug-macro.S b/arch/arm/mach-exynos4/include/mach/debug-macro.S
index a442ef8..6cacf16 100644
--- a/arch/arm/mach-exynos4/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 4c9adbd..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -68,7 +68,7 @@
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -89,14 +89,3 @@
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #28
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-exynos4/mach-armlex4210.c b/arch/arm/mach-exynos4/mach-armlex4210.c
index b482c62..f0ca6c1 100644
--- a/arch/arm/mach-exynos4/mach-armlex4210.c
+++ b/arch/arm/mach-exynos4/mach-armlex4210.c
@@ -207,7 +207,7 @@
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c
index 43be71b..6e05368 100644
--- a/arch/arm/mach-exynos4/mach-nuri.c
+++ b/arch/arm/mach-exynos4/mach-nuri.c
@@ -1152,7 +1152,7 @@
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c
index b3b5d89..2aac6f7 100644
--- a/arch/arm/mach-exynos4/mach-universal_c210.c
+++ b/arch/arm/mach-exynos4/mach-universal_c210.c
@@ -762,7 +762,7 @@
MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = exynos4_init_irq,
.map_io = universal_map_io,
.init_machine = universal_machine_init,
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index eb182f2..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -403,9 +403,11 @@
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L0;
setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+ evt->irq = IRQ_MCT_L1;
setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
}
@@ -422,12 +424,10 @@
return 0;
}
-int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- unsigned int cpu = smp_processor_id();
- struct mct_clock_event_device *mevt = &mct_tick[cpu];
-
- return exynos4_mct_tick_clear(mevt);
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_irq(evt->irq);
}
#endif /* CONFIG_LOCAL_TIMERS */
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index d5f0f29..782dcf1 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -197,12 +197,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "EXYNOS4: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-footbridge/cats-hw.c b/arch/arm/mach-footbridge/cats-hw.c
index 5b1a8db..a3da5d1 100644
--- a/arch/arm/mach-footbridge/cats-hw.c
+++ b/arch/arm/mach-footbridge/cats-hw.c
@@ -86,7 +86,7 @@
MACHINE_START(CATS, "Chalice-CATS")
/* Maintainer: Philip Blundell */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.soft_reboot = 1,
.fixup = fixup_cats,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c
index 2ef69ff..012210c 100644
--- a/arch/arm/mach-footbridge/ebsa285.c
+++ b/arch/arm/mach-footbridge/ebsa285.c
@@ -15,7 +15,7 @@
MACHINE_START(EBSA285, "EBSA285")
/* Maintainer: Russell King */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.map_io = footbridge_map_io,
diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S
index 1be2eeb..e5acde2 100644
--- a/arch/arm/mach-footbridge/include/mach/debug-macro.S
+++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#ifndef CONFIG_DEBUG_DC21285_PORT
/* For NetWinder debugging */
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x000003f8
orr \rv, \rp, #0xff000000 @ virtual
orr \rp, \rp, #0x7c000000 @ physical
@@ -31,7 +31,7 @@
.equ dc21285_high, ARMCSR_BASE & 0xff000000
.equ dc21285_low, ARMCSR_BASE & 0x00ffffff
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
.if dc21285_low
mov \rp, #dc21285_low
.else
diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c
index 06e514f..d8c1c92 100644
--- a/arch/arm/mach-footbridge/netwinder-hw.c
+++ b/arch/arm/mach-footbridge/netwinder-hw.c
@@ -648,7 +648,7 @@
MACHINE_START(NETWINDER, "Rebel-NetWinder")
/* Maintainer: Russell King/Rebel.com */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.video_start = 0x000a0000,
.video_end = 0x000bffff,
.reserve_lp0 = 1,
diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c
index 3285e91..f41dba3 100644
--- a/arch/arm/mach-footbridge/personal.c
+++ b/arch/arm/mach-footbridge/personal.c
@@ -15,7 +15,7 @@
MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer")
/* Maintainer: Jamey Hicks / George France */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = footbridge_map_io,
.init_irq = footbridge_init_irq,
.timer = &footbridge_timer,
diff --git a/arch/arm/mach-gemini/board-nas4220b.c b/arch/arm/mach-gemini/board-nas4220b.c
index 0cf7a07..5927d3c 100644
--- a/arch/arm/mach-gemini/board-nas4220b.c
+++ b/arch/arm/mach-gemini/board-nas4220b.c
@@ -102,7 +102,7 @@
}
MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &ib4220b_timer,
diff --git a/arch/arm/mach-gemini/board-rut1xx.c b/arch/arm/mach-gemini/board-rut1xx.c
index 4fa09af..cd7437a 100644
--- a/arch/arm/mach-gemini/board-rut1xx.c
+++ b/arch/arm/mach-gemini/board-rut1xx.c
@@ -86,7 +86,7 @@
}
MACHINE_START(RUT100, "Teltonika RUT100")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &rut1xx_timer,
diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c
index 88cc422..a367880 100644
--- a/arch/arm/mach-gemini/board-wbd111.c
+++ b/arch/arm/mach-gemini/board-wbd111.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD111, "Wiliboard WBD-111")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd111_timer,
diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c
index 3a22034..f382811 100644
--- a/arch/arm/mach-gemini/board-wbd222.c
+++ b/arch/arm/mach-gemini/board-wbd222.c
@@ -129,7 +129,7 @@
}
MACHINE_START(WBD222, "Wiliboard WBD-222")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = gemini_map_io,
.init_irq = gemini_init_irq,
.timer = &wbd222_timer,
diff --git a/arch/arm/mach-gemini/include/mach/debug-macro.S b/arch/arm/mach-gemini/include/mach/debug-macro.S
index f40e006..8376707 100644
--- a/arch/arm/mach-gemini/include/mach/debug-macro.S
+++ b/arch/arm/mach-gemini/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =GEMINI_UART_BASE @ physical
ldr \rv, =IO_ADDRESS(GEMINI_UART_BASE) @ virtual
.endm
diff --git a/arch/arm/mach-gemini/include/mach/memory.h b/arch/arm/mach-gemini/include/mach/memory.h
deleted file mode 100644
index a50915f..0000000
--- a/arch/arm/mach-gemini/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * Copyright (C) 2001-2006 Storlink, Corp.
- * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#ifdef CONFIG_GEMINI_MEM_SWAP
-# define PLAT_PHYS_OFFSET UL(0x00000000)
-#else
-# define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c
index 65f1bea..9886f19 100644
--- a/arch/arm/mach-h720x/h7201-eval.c
+++ b/arch/arm/mach-h720x/h7201-eval.c
@@ -29,7 +29,7 @@
MACHINE_START(H7201, "Hynix GMS30C7201")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0xc0001000,
+ .atag_offset = 0x1000,
.map_io = h720x_map_io,
.init_irq = h720x_init_irq,
.timer = &h7201_timer,
diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c
index 884584a..284a134 100644
--- a/arch/arm/mach-h720x/h7202-eval.c
+++ b/arch/arm/mach-h720x/h7202-eval.c
@@ -71,7 +71,7 @@
MACHINE_START(H7202, "Hynix HMS30C7202")
/* Maintainer: Robert Schwebel, Pengutronix */
- .boot_params = 0x40000100,
+ .atag_offset = 0x100,
.map_io = h720x_map_io,
.init_irq = h7202_init_irq,
.timer = &h7202_timer,
diff --git a/arch/arm/mach-h720x/include/mach/debug-macro.S b/arch/arm/mach-h720x/include/mach/debug-macro.S
index c2093e8..8a46157 100644
--- a/arch/arm/mach-h720x/include/mach/debug-macro.S
+++ b/arch/arm/mach-h720x/include/mach/debug-macro.S
@@ -16,7 +16,7 @@
.equ io_virt, IO_VIRT
.equ io_phys, IO_PHYS
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00020000 @ UART1
add \rv, \rp, #io_virt @ virtual address
add \rp, \rp, #io_phys @ physical base address
diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h
deleted file mode 100644
index 96dcf50..0000000
--- a/arch/arm/mach-h720x/include/mach/memory.h
+++ /dev/null
@@ -1,11 +0,0 @@
-/*
- * arch/arm/mach-h720x/include/mach/memory.h
- *
- * Copyright (c) 2000 Jungjun Kim
- *
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x40000000)
-#endif
diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c
index ede2710..2152590 100644
--- a/arch/arm/mach-imx/mach-armadillo5x0.c
+++ b/arch/arm/mach-imx/mach-armadillo5x0.c
@@ -558,7 +558,7 @@
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c
index f851fe9..b1ec2cf 100644
--- a/arch/arm/mach-imx/mach-cpuimx27.c
+++ b/arch/arm/mach-imx/mach-cpuimx27.c
@@ -311,7 +311,7 @@
};
MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 4bd083b..470b654 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@
MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
index 2442d5d..9163318 100644
--- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
+++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c
@@ -163,7 +163,7 @@
MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
/* Maintainer: Eukrea Electromatique */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
index 6778f81..22306ce 100644
--- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
+++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c
@@ -275,7 +275,7 @@
};
MACHINE_START(IMX27_VISSTRIM_M10, "Vista Silicon Visstrim_M10")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c
index 272f793..8da48b3 100644
--- a/arch/arm/mach-imx/mach-imx27ipcam.c
+++ b/arch/arm/mach-imx/mach-imx27ipcam.c
@@ -71,7 +71,7 @@
MACHINE_START(IMX27IPCAM, "Freescale IMX27IPCAM")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c
index d81a769..21a14a2 100644
--- a/arch/arm/mach-imx/mach-imx27lite.c
+++ b/arch/arm/mach-imx/mach-imx27lite.c
@@ -77,7 +77,7 @@
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c
index e472a1d..7c20e9e 100644
--- a/arch/arm/mach-imx/mach-kzm_arm11_01.c
+++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c
@@ -271,7 +271,7 @@
};
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = kzm_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 5cd8bee..530ea08 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -145,7 +145,7 @@
MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
@@ -154,7 +154,7 @@
MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
- .boot_params = MX1_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c
index d389ecf..e56828d 100644
--- a/arch/arm/mach-imx/mach-mx21ads.c
+++ b/arch/arm/mach-imx/mach-mx21ads.c
@@ -305,7 +305,7 @@
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX21_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx21ads_map_io,
.init_early = imx21_init_early,
.init_irq = mx21_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
index 7f66a91..dd25ee8 100644
--- a/arch/arm/mach-imx/mach-mx25_3ds.c
+++ b/arch/arm/mach-imx/mach-mx25_3ds.c
@@ -253,7 +253,7 @@
MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX25_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c
index 6fa6934..2eafbac 100644
--- a/arch/arm/mach-imx/mach-mx27_3ds.c
+++ b/arch/arm/mach-imx/mach-mx27_3ds.c
@@ -421,7 +421,7 @@
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index e1addc1..635b050 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -344,7 +344,7 @@
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27ads_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c
index c20be75..589066f 100644
--- a/arch/arm/mach-imx/mach-mx31_3ds.c
+++ b/arch/arm/mach-imx/mach-mx31_3ds.c
@@ -764,7 +764,7 @@
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c
index 29ca890..910c456 100644
--- a/arch/arm/mach-imx/mach-mx31ads.c
+++ b/arch/arm/mach-imx/mach-mx31ads.c
@@ -535,7 +535,7 @@
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31ads_map_io,
.init_early = imx31_init_early,
.init_irq = mx31ads_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c
index 126913a..e92eaf9 100644
--- a/arch/arm/mach-imx/mach-mx31lilly.c
+++ b/arch/arm/mach-imx/mach-mx31lilly.c
@@ -295,7 +295,7 @@
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 4b47fd9..5242cb7 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -280,7 +280,7 @@
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31lite_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index b358383..1d01ef2 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -567,7 +567,7 @@
MACHINE_START(MX31MOBOARD, "EPFL Mobots mx31moboard")
/* Maintainer: Valentin Longchamp, EPFL Mobots group */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = mx31moboard_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index b3b9bd8..f2a873d 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -217,7 +217,7 @@
MACHINE_START(MX35_3DS, "Freescale MX35PDK")
/* Maintainer: Freescale Semiconductor, Inc */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c
index c85876f..5ec3989 100644
--- a/arch/arm/mach-imx/mach-mxt_td60.c
+++ b/arch/arm/mach-imx/mach-mxt_td60.c
@@ -267,7 +267,7 @@
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c
index 71083aa..0f6bd11 100644
--- a/arch/arm/mach-imx/mach-pca100.c
+++ b/arch/arm/mach-imx/mach-pca100.c
@@ -435,7 +435,7 @@
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index f45b7cd..186d4eb 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -688,7 +688,7 @@
MACHINE_START(PCM037, "Phytec Phycore pcm037")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.reserve = pcm037_reserve,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c
index 2d6a64b..091bcf8 100644
--- a/arch/arm/mach-imx/mach-pcm038.c
+++ b/arch/arm/mach-imx/mach-pcm038.c
@@ -349,7 +349,7 @@
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
- .boot_params = MX27_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 660ec3e..0a4d31d 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -418,7 +418,7 @@
MACHINE_START(PCM043, "Phytec Phycore pcm043")
/* Maintainer: Pengutronix */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = mx35_init_irq,
diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c
index 3626f48..9e11359 100644
--- a/arch/arm/mach-imx/mach-qong.c
+++ b/arch/arm/mach-imx/mach-qong.c
@@ -262,7 +262,7 @@
MACHINE_START(QONG, "Dave/DENX QongEVB-LITE")
/* Maintainer: DENX Software Engineering GmbH */
- .boot_params = MX3x_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx31_map_io,
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c
index db2d604..85d3284 100644
--- a/arch/arm/mach-imx/mach-scb9328.c
+++ b/arch/arm/mach-imx/mach-scb9328.c
@@ -137,7 +137,7 @@
MACHINE_START(SCB9328, "Synertronixx scb9328")
/* Sascha Hauer */
- .boot_params = 0x08000100,
+ .atag_offset = 100,
.map_io = mx1_map_io,
.init_early = imx1_init_early,
.init_irq = mx1_init_irq,
diff --git a/arch/arm/mach-integrator/include/mach/debug-macro.S b/arch/arm/mach-integrator/include/mach/debug-macro.S
index a1f598f..411b116 100644
--- a/arch/arm/mach-integrator/include/mach/debug-macro.S
+++ b/arch/arm/mach-integrator/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x16000000 @ physical base address
mov \rv, #0xf0000000 @ virtual base
add \rv, \rv, #0x16000000 >> 4
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 8cdc730..a20fb3f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -459,7 +459,7 @@
MACHINE_START(INTEGRATOR, "ARM-Integrator")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = ap_map_io,
.init_early = integrator_init_early,
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 4eb03ab..5de49c3 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -492,7 +492,7 @@
MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = integrator_reserve,
.map_io = intcp_map_io,
.init_early = intcp_init_early,
diff --git a/arch/arm/mach-iop13xx/include/mach/debug-macro.S b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
index e664466..d869a6f 100644
--- a/arch/arm/mach-iop13xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop13xx/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00002300
orr \rp, \rp, #0x00000040
orr \rv, \rp, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 23dfaff..4cf2cc4 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -91,7 +91,7 @@
MACHINE_START(IQ81340MC, "Intel IQ81340MC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340mc_timer,
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index df3492a..cd9e274 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -93,7 +93,7 @@
MACHINE_START(IQ81340SC, "Intel IQ81340SC")
/* Maintainer: Dan Williams <dan.j.williams@intel.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop13xx_map_io,
.init_irq = iop13xx_init_irq,
.timer = &iq81340sc_timer,
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 6cbffbf..4325055 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -203,7 +203,7 @@
}
MACHINE_START(EM7210, "Lanner EM7210")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = em7210_map_io,
.init_irq = iop32x_init_irq,
.timer = &em7210_timer,
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index ceef5d4..0edc880 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -207,7 +207,7 @@
MACHINE_START(GLANTANK, "GLAN Tank")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = glantank_map_io,
.init_irq = iop32x_init_irq,
.timer = &glantank_timer,
diff --git a/arch/arm/mach-iop32x/include/mach/debug-macro.S b/arch/arm/mach-iop32x/include/mach/debug-macro.S
index ff9e76c..363bdf9 100644
--- a/arch/arm/mach-iop32x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop32x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xfe000000 @ physical as well as virtual
orr \rp, \rp, #0x00800000 @ location of the UART
mov \rv, \rp
diff --git a/arch/arm/mach-iop32x/include/mach/memory.h b/arch/arm/mach-iop32x/include/mach/memory.h
deleted file mode 100644
index 169cc23..0000000
--- a/arch/arm/mach-iop32x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop32x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index 3a62514..9e7aacc 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -313,7 +313,7 @@
MACHINE_START(IQ31244, "Intel IQ31244")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
@@ -327,7 +327,7 @@
*/
MACHINE_START(EP80219, "Intel EP80219")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq31244_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq31244_timer,
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index 35b7e69..53ea86f 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -186,7 +186,7 @@
MACHINE_START(IQ80321, "Intel IQ80321")
/* Maintainer: Intel Corp. */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = iq80321_map_io,
.init_irq = iop32x_init_irq,
.timer = &iq80321_timer,
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index 1a374ea..d726927 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -327,7 +327,7 @@
MACHINE_START(N2100, "Thecus N2100")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = n2100_map_io,
.init_irq = iop32x_init_irq,
.timer = &n2100_timer,
diff --git a/arch/arm/mach-iop33x/include/mach/debug-macro.S b/arch/arm/mach-iop33x/include/mach/debug-macro.S
index 40c500d..361be1f 100644
--- a/arch/arm/mach-iop33x/include/mach/debug-macro.S
+++ b/arch/arm/mach-iop33x/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00ff0000
orr \rp, \rp, #0x0000f700
orr \rv, #0xfe000000 @ virtual
diff --git a/arch/arm/mach-iop33x/include/mach/memory.h b/arch/arm/mach-iop33x/include/mach/memory.h
deleted file mode 100644
index 8e1daf7..0000000
--- a/arch/arm/mach-iop33x/include/mach/memory.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/*
- * arch/arm/mach-iop33x/include/mach/memory.h
- */
-
-#ifndef __MEMORY_H
-#define __MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index 637c027..9e14ccc 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80331, "Intel IQ80331")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80331_timer,
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 90a0436..09c899a 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -141,7 +141,7 @@
MACHINE_START(IQ80332, "Intel IQ80332")
/* Maintainer: Intel Corp. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = iop3xx_map_io,
.init_irq = iop33x_init_irq,
.timer = &iq80332_timer,
diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c
index 62c60ad..af99945 100644
--- a/arch/arm/mach-ixp2000/enp2611.c
+++ b/arch/arm/mach-ixp2000/enp2611.c
@@ -254,7 +254,7 @@
MACHINE_START(ENP2611, "Radisys ENP-2611 PCI network processor board")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = enp2611_map_io,
.init_irq = ixp2000_init_irq,
.timer = &enp2611_timer,
diff --git a/arch/arm/mach-ixp2000/include/mach/debug-macro.S b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
index 0ef533b..bdd3ccd 100644
--- a/arch/arm/mach-ixp2000/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp2000/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00030000
#ifdef __ARMEB__
orr \rp, \rp, #0x00000003
diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c
index 5bad1a8..f7dfd97 100644
--- a/arch/arm/mach-ixp2000/ixdp2400.c
+++ b/arch/arm/mach-ixp2000/ixdp2400.c
@@ -171,7 +171,7 @@
MACHINE_START(IXDP2400, "Intel IXDP2400 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2400_init_irq,
.timer = &ixdp2400_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c
index 3d3cef8..d33bcac 100644
--- a/arch/arm/mach-ixp2000/ixdp2800.c
+++ b/arch/arm/mach-ixp2000/ixdp2800.c
@@ -286,7 +286,7 @@
MACHINE_START(IXDP2800, "Intel IXDP2800 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x00_map_io,
.init_irq = ixdp2800_init_irq,
.timer = &ixdp2800_timer,
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index be2a254..61a2867 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -417,7 +417,7 @@
#ifdef CONFIG_ARCH_IXDP2401
MACHINE_START(IXDP2401, "Intel IXDP2401 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -428,7 +428,7 @@
#ifdef CONFIG_ARCH_IXDP2801
MACHINE_START(IXDP2801, "Intel IXDP2801 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
@@ -441,7 +441,7 @@
*/
MACHINE_START(IXDP28X5, "Intel IXDP2805/2855 Development Platform")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixdp2x01_map_io,
.init_irq = ixdp2x01_init_irq,
.timer = &ixdp2x01_timer,
diff --git a/arch/arm/mach-ixp23xx/espresso.c b/arch/arm/mach-ixp23xx/espresso.c
index e25e5fe..30dd316 100644
--- a/arch/arm/mach-ixp23xx/espresso.c
+++ b/arch/arm/mach-ixp23xx/espresso.c
@@ -88,6 +88,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = espresso_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
index f7c6eef..5ff524c 100644
--- a/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp23xx/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/ixp23xx.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IXP23XX_PERIPHERAL_PHYS @ physical
ldr \rv, =IXP23XX_PERIPHERAL_VIRT @ virtual
#ifdef __ARMEB__
diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c
index ec028e3..b3a57e0 100644
--- a/arch/arm/mach-ixp23xx/ixdp2351.c
+++ b/arch/arm/mach-ixp23xx/ixdp2351.c
@@ -331,6 +331,6 @@
.map_io = ixdp2351_map_io,
.init_irq = ixdp2351_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ixdp2351_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c
index 844551d..8f4dcbb 100644
--- a/arch/arm/mach-ixp23xx/roadrunner.c
+++ b/arch/arm/mach-ixp23xx/roadrunner.c
@@ -175,6 +175,6 @@
.map_io = ixp23xx_map_io,
.init_irq = ixp23xx_init_irq,
.timer = &ixp23xx_timer,
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = roadrunner_init,
MACHINE_END
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index ee19c1d..37609a2 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -185,7 +185,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = avila_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index e24564b..81dfec3 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -112,7 +112,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -130,7 +130,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = coyote_init,
MACHINE_END
#endif
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 96e3783..8837fbc 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -278,7 +278,7 @@
MACHINE_START(DSMG600, "D-Link DSM-G600 RevA")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &dsmg600_timer,
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 72333a0..2887c35 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -272,7 +272,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = fsg_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c
index d4f851b..d69d1b0 100644
--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
@@ -99,7 +99,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gateway7001_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index 7548d9a..bf6678d 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -499,7 +499,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gmlr_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 3790dff..aa029fc 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -167,7 +167,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = gtwx5715_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
index b974a49..8c9f8d5 100644
--- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
#ifdef __ARMEB__
mov \rp, #3 @ Uart regs are at off set of 3 if
@ byte writes used - Big Endian.
diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h
deleted file mode 100644
index 4caf176..0000000
--- a/arch/arm/mach-ixp4xx/include/mach/memory.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/memory.h
- *
- * Copyright (c) 2001-2004 MontaVista Software, Inc.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/sizes.h>
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index 6a29279..f235f82 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -256,7 +256,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -270,7 +270,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -284,7 +284,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
@@ -298,7 +298,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = ixdp425_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index b752fa4..de716fa 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -313,7 +313,7 @@
MACHINE_START(NAS100D, "Iomega NAS 100d")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 0411a0a..ac81ccb 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -299,7 +299,7 @@
MACHINE_START(NSLU2, "Linksys NSLU2")
/* Maintainer: www.nslu2-linux.org */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &nslu2_timer,
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
index 4dfdc69..3b6a81a 100644
--- a/arch/arm/mach-ixp4xx/omixp-setup.c
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -241,7 +241,7 @@
#ifdef CONFIG_MACH_DEVIXP
MACHINE_START(DEVIXP, "Omicron DEVIXP")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
@@ -251,7 +251,7 @@
#ifdef CONFIG_MACH_MICCPT
MACHINE_START(MICCPT, "Omicron MICCPT")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
@@ -264,7 +264,7 @@
#ifdef CONFIG_MACH_MIC256
MACHINE_START(MIC256, "Omicron MIC256")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c
index 045336c..27e469e 100644
--- a/arch/arm/mach-ixp4xx/vulcan-setup.c
+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
@@ -239,7 +239,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = vulcan_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c
index 40b9fad..b14144b 100644
--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
@@ -100,7 +100,7 @@
.map_io = ixp4xx_map_io,
.init_irq = ixp4xx_init_irq,
.timer = &ixp4xx_timer,
- .boot_params = 0x0100,
+ .atag_offset = 0x100,
.init_machine = wg302v2_init,
#if defined(CONFIG_PCI)
.dma_zone_size = SZ_64M,
diff --git a/arch/arm/mach-kirkwood/d2net_v2-setup.c b/arch/arm/mach-kirkwood/d2net_v2-setup.c
index 043cfd5..f457e07 100644
--- a/arch/arm/mach-kirkwood/d2net_v2-setup.c
+++ b/arch/arm/mach-kirkwood/d2net_v2-setup.c
@@ -221,7 +221,7 @@
}
MACHINE_START(D2NET_V2, "LaCie d2 Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
index bff04e0..ff4c21c 100644
--- a/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
+++ b/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -97,7 +97,7 @@
MACHINE_START(DB88F6281_BP, "Marvell DB-88F6281-BP Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
index f14dfb8..e4d199b 100644
--- a/arch/arm/mach-kirkwood/dockstar-setup.c
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -102,7 +102,7 @@
}
MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dockstar_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/guruplug-setup.c b/arch/arm/mach-kirkwood/guruplug-setup.c
index 41d1b40..6c40f78 100644
--- a/arch/arm/mach-kirkwood/guruplug-setup.c
+++ b/arch/arm/mach-kirkwood/guruplug-setup.c
@@ -121,7 +121,7 @@
MACHINE_START(GURUPLUG, "Marvell GuruPlug Reference Board")
/* Maintainer: Siddarth Gore <gores@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = guruplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/include/mach/debug-macro.S b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
index db06ae43..f785d40 100644
--- a/arch/arm/mach-kirkwood/include/mach/debug-macro.S
+++ b/arch/arm/mach-kirkwood/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/bridge-regs.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KIRKWOOD_REGS_PHYS_BASE
ldr \rv, =KIRKWOOD_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-kirkwood/include/mach/memory.h b/arch/arm/mach-kirkwood/include/mach/memory.h
deleted file mode 100644
index 4600b44..0000000
--- a/arch/arm/mach-kirkwood/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-kirkwood/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
index 00cca22..9a1e917 100644
--- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
@@ -163,7 +163,7 @@
MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv88f6281gtw_ge_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
index 7cdab57..8849bcc 100644
--- a/arch/arm/mach-kirkwood/netspace_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -258,7 +258,7 @@
#ifdef CONFIG_MACH_NETSPACE_V2
MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -269,7 +269,7 @@
#ifdef CONFIG_MACH_INETSPACE_V2
MACHINE_START(INETSPACE_V2, "LaCie Internet Space v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -280,7 +280,7 @@
#ifdef CONFIG_MACH_NETSPACE_MAX_V2
MACHINE_START(NETSPACE_MAX_V2, "LaCie Network Space Max v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netspace_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/netxbig_v2-setup.c b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
index 6be627d..1ba12c4 100644
--- a/arch/arm/mach-kirkwood/netxbig_v2-setup.c
+++ b/arch/arm/mach-kirkwood/netxbig_v2-setup.c
@@ -399,7 +399,7 @@
#ifdef CONFIG_MACH_NET2BIG_V2
MACHINE_START(NET2BIG_V2, "LaCie 2Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -410,7 +410,7 @@
#ifdef CONFIG_MACH_NET5BIG_V2
MACHINE_START(NET5BIG_V2, "LaCie 5Big Network v2")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = netxbig_v2_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/openrd-setup.c b/arch/arm/mach-kirkwood/openrd-setup.c
index f69beef..5660ca6 100644
--- a/arch/arm/mach-kirkwood/openrd-setup.c
+++ b/arch/arm/mach-kirkwood/openrd-setup.c
@@ -214,7 +214,7 @@
#ifdef CONFIG_MACH_OPENRD_BASE
MACHINE_START(OPENRD_BASE, "Marvell OpenRD Base Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -226,7 +226,7 @@
#ifdef CONFIG_MACH_OPENRD_CLIENT
MACHINE_START(OPENRD_CLIENT, "Marvell OpenRD Client Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -238,7 +238,7 @@
#ifdef CONFIG_MACH_OPENRD_ULTIMATE
MACHINE_START(OPENRD_ULTIMATE, "Marvell OpenRD Ultimate Board")
/* Maintainer: Dhaval Vasa <dhaval.vasa@einfochips.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = openrd_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 75c6601..6663869 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -79,7 +79,7 @@
MACHINE_START(RD88F6192_NAS, "Marvell RD-88F6192-NAS Development Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6192_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c
index 0f75494..66b3c05 100644
--- a/arch/arm/mach-kirkwood/rd88f6281-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c
@@ -115,7 +115,7 @@
MACHINE_START(RD88F6281, "Marvell RD-88F6281 Reference Board")
/* Maintainer: Saeed Bishara <saeed@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6281_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/sheevaplug-setup.c b/arch/arm/mach-kirkwood/sheevaplug-setup.c
index 17de0bf..8b102d6 100644
--- a/arch/arm/mach-kirkwood/sheevaplug-setup.c
+++ b/arch/arm/mach-kirkwood/sheevaplug-setup.c
@@ -138,7 +138,7 @@
#ifdef CONFIG_MACH_SHEEVAPLUG
MACHINE_START(SHEEVAPLUG, "Marvell SheevaPlug Reference Board")
/* Maintainer: shadi Ammouri <shadi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
@@ -149,7 +149,7 @@
#ifdef CONFIG_MACH_ESATA_SHEEVAPLUG
MACHINE_START(ESATA_SHEEVAPLUG, "Marvell eSATA SheevaPlug Reference Board")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = sheevaplug_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/t5325-setup.c b/arch/arm/mach-kirkwood/t5325-setup.c
index e6b9b1b..ea104fb 100644
--- a/arch/arm/mach-kirkwood/t5325-setup.c
+++ b/arch/arm/mach-kirkwood/t5325-setup.c
@@ -201,7 +201,7 @@
MACHINE_START(T5325, "HP t5325 Thin Client")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = hp_t5325_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index 68f32f2..262c034 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -132,7 +132,7 @@
MACHINE_START(TS219, "QNAP TS-119/TS-219")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts219_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
index d5d0099..b68f5b4 100644
--- a/arch/arm/mach-kirkwood/ts41x-setup.c
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -176,7 +176,7 @@
MACHINE_START(TS41X, "QNAP TS-41x")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts41x_init,
.map_io = kirkwood_map_io,
.init_early = kirkwood_init_early,
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index 3d7d114..a91f99d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -223,7 +223,7 @@
MACHINE_START(ACS5K, "Brivo Systems LLC ACS-5000 Master board")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = acs5k_init,
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index c3c867a..d24bcef 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -121,7 +121,7 @@
MACHINE_START(DSM320, "D-Link DSM-320 Wireless Media Player")
/* Maintainer: Simtec Electronics. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = dsm320_init,
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 9b9c47c..16c9565 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -53,7 +53,7 @@
MACHINE_START(KS8695, "KS8695 Centaur Development Board")
/* Maintainer: Micrel Semiconductor Inc. */
- .boot_params = KS8695_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = ks8695_map_io,
.init_irq = ks8695_init_irq,
.init_machine = micrel_init,
diff --git a/arch/arm/mach-ks8695/include/mach/debug-macro.S b/arch/arm/mach-ks8695/include/mach/debug-macro.S
index bf516ad..a79e489 100644
--- a/arch/arm/mach-ks8695/include/mach/debug-macro.S
+++ b/arch/arm/mach-ks8695/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/regs-uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =KS8695_UART_PA @ physical base address
ldr \rv, =KS8695_UART_VA @ virtual base address
.endm
diff --git a/arch/arm/mach-l7200/include/mach/debug-macro.S b/arch/arm/mach-l7200/include/mach/debug-macro.S
index b0a2db7..0b4e760 100644
--- a/arch/arm/mach-l7200/include/mach/debug-macro.S
+++ b/arch/arm/mach-l7200/include/mach/debug-macro.S
@@ -14,7 +14,7 @@
.equ io_virt, IO_BASE
.equ io_phys, IO_START
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00044000 @ UART1
@ mov \rp, #0x00045000 @ UART2
add \rv, \rp, #io_virt @ virtual address
diff --git a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
index 629e744..351bd6c 100644
--- a/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-lpc32xx/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
* Debug output is hardcoded to standard UART 5
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldreq \rp, =0x40090000
ldrne \rv, =0xF4090000
.endm
diff --git a/arch/arm/mach-lpc32xx/include/mach/memory.h b/arch/arm/mach-lpc32xx/include/mach/memory.h
deleted file mode 100644
index a647dd6..0000000
--- a/arch/arm/mach-lpc32xx/include/mach/memory.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/memory.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset of bank 0
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index c3a22fd..6d2f0d1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -383,7 +383,7 @@
MACHINE_START(PHY3250, "Phytec 3250 board with the LPC3250 Microcontroller")
/* Maintainer: Kevin Wells, NXP Semiconductors */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = lpc32xx_map_io,
.init_irq = lpc32xx_init_irq,
.timer = &lpc32xx_timer,
diff --git a/arch/arm/mach-mmp/include/mach/debug-macro.S b/arch/arm/mach-mmp/include/mach/debug-macro.S
index 7e2ebd3..b6f14d2 100644
--- a/arch/arm/mach-mmp/include/mach/debug-macro.S
+++ b/arch/arm/mach-mmp/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
#include <mach/addr-map.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =APB_PHYS_BASE @ physical
ldr \rv, =APB_VIRT_BASE @ virtual
orr \rp, \rp, #0x00017000
diff --git a/arch/arm/mach-mmp/include/mach/memory.h b/arch/arm/mach-mmp/include/mach/memory.h
deleted file mode 100644
index d68b50a..0000000
--- a/arch/arm/mach-mmp/include/mach/memory.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * linux/arch/arm/mach-mmp/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_MACH_MEMORY_H
-#define __ASM_MACH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c
index 18a3c97..16c86f8 100644
--- a/arch/arm/mach-msm/board-halibut.c
+++ b/arch/arm/mach-msm/board-halibut.c
@@ -93,7 +93,7 @@
}
MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = halibut_fixup,
.map_io = halibut_map_io,
.init_irq = halibut_init_irq,
diff --git a/arch/arm/mach-msm/board-mahimahi.c b/arch/arm/mach-msm/board-mahimahi.c
index 7a9a03e..8a1672e 100644
--- a/arch/arm/mach-msm/board-mahimahi.c
+++ b/arch/arm/mach-msm/board-mahimahi.c
@@ -74,7 +74,7 @@
extern struct sys_timer msm_timer;
MACHINE_START(MAHIMAHI, "mahimahi")
- .boot_params = 0x20000100,
+ .atag_offset = 0x100,
.fixup = mahimahi_fixup,
.map_io = mahimahi_map_io,
.init_irq = msm_init_irq,
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index 1a313e1..6d84ee7 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -129,7 +129,7 @@
}
MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -137,7 +137,7 @@
MACHINE_END
MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -145,7 +145,7 @@
MACHINE_END
MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
@@ -153,7 +153,7 @@
MACHINE_END
MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = msm7x2x_map_io,
.init_irq = msm7x2x_init_irq,
.init_machine = msm7x2x_init,
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index 92afaf6..71de506 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -24,6 +24,7 @@
#include <linux/smsc911x.h>
#include <linux/usb/msm_hsusb.h>
#include <linux/clkdev.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -41,6 +42,21 @@
extern struct sys_timer msm_timer;
+static void __init msm7x30_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM && tag->u.mem.start == 0x200000) {
+ tag->u.mem.start = 0;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm7x30_reserve(void)
+{
+ memblock_remove(0x0, SZ_2M);
+}
+
static int hsusb_phy_init_seq[] = {
0x30, 0x32, /* Enable and set Pre-Emphasis Depth to 20% */
0x02, 0x36, /* Disable CDR Auto Reset feature */
@@ -105,7 +121,9 @@
}
MACHINE_START(MSM7X30_SURF, "QCT MSM7X30 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -113,7 +131,9 @@
MACHINE_END
MACHINE_START(MSM7X30_FFA, "QCT MSM7X30 FFA")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
@@ -121,7 +141,9 @@
MACHINE_END
MACHINE_START(MSM7X30_FLUID, "QCT MSM7X30 FLUID")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
+ .fixup = msm7x30_fixup,
+ .reserve = msm7x30_reserve,
.map_io = msm7x30_map_io,
.init_irq = msm7x30_init_irq,
.init_machine = msm7x30_init,
diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c
index 35c7cee..b04468e 100644
--- a/arch/arm/mach-msm/board-msm8960.c
+++ b/arch/arm/mach-msm/board-msm8960.c
@@ -20,16 +20,34 @@
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/clkdev.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
#include "devices.h"
+static void __init msm8960_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM &&
+ tag->u.mem.start == 0x40200000) {
+ tag->u.mem.start = 0x40000000;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm8960_reserve(void)
+{
+ memblock_remove(0x40000000, SZ_2M);
+}
+
static void __init msm8960_map_io(void)
{
msm_map_msm8960_io();
@@ -76,6 +94,8 @@
}
MACHINE_START(MSM8960_SIM, "QCT MSM8960 SIMULATOR")
+ .fixup = msm8960_fixup,
+ .reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
@@ -83,6 +103,8 @@
MACHINE_END
MACHINE_START(MSM8960_RUMI3, "QCT MSM8960 RUMI3")
+ .fixup = msm8960_fixup,
+ .reserve = msm8960_reserve,
.map_io = msm8960_map_io,
.init_irq = msm8960_init_irq,
.timer = &msm_timer,
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 1163b6f..106170f 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -20,14 +20,31 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/irq.h>
+#include <linux/memblock.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
+#include <asm/setup.h>
#include <mach/board.h>
#include <mach/msm_iomap.h>
+static void __init msm8x60_fixup(struct machine_desc *desc, struct tag *tag,
+ char **cmdline, struct meminfo *mi)
+{
+ for (; tag->hdr.size; tag = tag_next(tag))
+ if (tag->hdr.tag == ATAG_MEM &&
+ tag->u.mem.start == 0x40200000) {
+ tag->u.mem.start = 0x40000000;
+ tag->u.mem.size += SZ_2M;
+ }
+}
+
+static void __init msm8x60_reserve(void)
+{
+ memblock_remove(0x40000000, SZ_2M);
+}
static void __init msm8x60_map_io(void)
{
@@ -36,8 +53,6 @@
static void __init msm8x60_init_irq(void)
{
- unsigned int i;
-
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
@@ -49,15 +64,6 @@
*/
if (!machine_is_msm8x60_sim())
writel(0x0000FFFF, MSM_QGIC_DIST_BASE + GIC_DIST_ENABLE_SET);
-
- /* FIXME: Not installing AVS_SVICINT and AVS_SVICINTSWDONE yet
- * as they are configured as level, which does not play nice with
- * handle_percpu_irq.
- */
- for (i = GIC_PPI_START; i < GIC_SPI_START; i++) {
- if (i != AVS_SVICINT && i != AVS_SVICINTSWDONE)
- irq_set_handler(i, handle_percpu_irq);
- }
}
static void __init msm8x60_init(void)
@@ -65,6 +71,8 @@
}
MACHINE_START(MSM8X60_RUMI3, "QCT MSM8X60 RUMI3")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -72,6 +80,8 @@
MACHINE_END
MACHINE_START(MSM8X60_SURF, "QCT MSM8X60 SURF")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -79,6 +89,8 @@
MACHINE_END
MACHINE_START(MSM8X60_SIM, "QCT MSM8X60 SIMULATOR")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
@@ -86,6 +98,8 @@
MACHINE_END
MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
+ .fixup = msm8x60_fixup,
+ .reserve = msm8x60_reserve,
.map_io = msm8x60_map_io,
.init_irq = msm8x60_init_irq,
.init_machine = msm8x60_init,
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 24e9b89..7e8909c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -192,7 +192,7 @@
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
@@ -200,7 +200,7 @@
MACHINE_END
MACHINE_START(QSD8X50A_ST1_5, "QCT QSD8X50A ST1.5")
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = qsd8x50_map_io,
.init_irq = qsd8x50_init_irq,
.init_machine = qsd8x50_init,
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index 863394c..afa9293 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -104,7 +104,7 @@
MACHINE_START(SAPPHIRE, "sapphire")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.fixup = sapphire_fixup,
.map_io = sapphire_map_io,
.init_irq = sapphire_init_irq,
diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c
index 8143867..22d5694 100644
--- a/arch/arm/mach-msm/board-trout.c
+++ b/arch/arm/mach-msm/board-trout.c
@@ -93,7 +93,7 @@
}
MACHINE_START(TROUT, "HTC Dream")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.fixup = trout_fixup,
.map_io = trout_map_io,
.init_irq = trout_init_irq,
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 646b99e..2dc73cc 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -20,7 +20,7 @@
#include <mach/msm_iomap.h>
#if defined(CONFIG_HAS_MSM_DEBUG_UART_PHYS) && !defined(CONFIG_MSM_DEBUG_UART_NONE)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MSM_DEBUG_UART_PHYS
ldr \rv, =MSM_DEBUG_UART_BASE
.endm
@@ -37,7 +37,7 @@
beq 1001b
.endm
#else
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rv, #0xff000000
orr \rv, \rv, #0x00f00000
.endm
diff --git a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
index 1246715..717076f 100644
--- a/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
+++ b/arch/arm/mach-msm/include/mach/entry-macro-qgic.S
@@ -8,81 +8,10 @@
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =gic_cpu_base_addr
- ldr \base, [\base]
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Migrated the code from ARM MP port to be more consistent
- * with interrupt processing , the following still holds true
- * however, all interrupts are treated the same regardless of
- * if they are local IPI or PPI
- *
- * Interrupts 0-15 are IPI
- * 16-31 are PPI
- * (16-18 are the timers)
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * A simple read from the controller will tell us the number of the
- * highest priority enabled interrupt. We then just need to check
- * whether it is in the valid range for an IRQ (0-1020 inclusive).
- *
- * Base ARM code assumes that the local (private) peripheral interrupts
- * are not valid, we treat them differently, in that the privates are
- * handled like normal shared interrupts with the exception that only
- * one processor can register the interrupt and the handler must be
- * the same for all processors.
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
-
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 =srcCPU,
- 9-0 =int # */
-
- bic \irqnr, \irqstat, #0x1c00 @mask src
- cmp \irqnr, #15
- ldr \tmp, =1021
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #16
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
diff --git a/arch/arm/mach-msm/include/mach/memory.h b/arch/arm/mach-msm/include/mach/memory.h
deleted file mode 100644
index f2f8d29..0000000
--- a/arch/arm/mach-msm/include/mach/memory.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/* arch/arm/mach-msm/include/mach/memory.h
- *
- * Copyright (C) 2007 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/* physical offset of RAM */
-#if defined(CONFIG_ARCH_QSD8X50) && defined(CONFIG_MSM_SOC_REV_A)
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#elif defined(CONFIG_ARCH_QSD8X50)
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#elif defined(CONFIG_ARCH_MSM7X30)
-#define PLAT_PHYS_OFFSET UL(0x00200000)
-#elif defined(CONFIG_ARCH_MSM8X60)
-#define PLAT_PHYS_OFFSET UL(0x40200000)
-#elif defined(CONFIG_ARCH_MSM8960)
-#define PLAT_PHYS_OFFSET UL(0x40200000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#endif
-
-#endif
-
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 1a1af9e..7276595 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -156,6 +156,12 @@
{
unsigned int i, ncores = get_core_count();
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c
index 63621f1..afeeca5 100644
--- a/arch/arm/mach-msm/timer.c
+++ b/arch/arm/mach-msm/timer.c
@@ -71,12 +71,16 @@
struct msm_clock {
struct clock_event_device clockevent;
struct clocksource clocksource;
- struct irqaction irq;
+ unsigned int irq;
void __iomem *regbase;
uint32_t freq;
uint32_t shift;
void __iomem *global_counter;
void __iomem *local_counter;
+ union {
+ struct clock_event_device *evt;
+ struct clock_event_device __percpu **percpu_evt;
+ };
};
enum {
@@ -87,13 +91,10 @@
static struct msm_clock msm_clocks[];
-static struct clock_event_device *local_clock_event;
static irqreturn_t msm_timer_interrupt(int irq, void *dev_id)
{
- struct clock_event_device *evt = dev_id;
- if (smp_processor_id() != 0)
- evt = local_clock_event;
+ struct clock_event_device *evt = *(struct clock_event_device **)dev_id;
if (evt->event_handler == NULL)
return IRQ_HANDLED;
evt->event_handler(evt);
@@ -171,13 +172,7 @@
.mask = CLOCKSOURCE_MASK(32),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "gp_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[0].clockevent,
- .irq = INT_GP_TIMER_EXP
- },
+ .irq = INT_GP_TIMER_EXP,
.freq = GPT_HZ,
},
[MSM_CLOCK_DGT] = {
@@ -196,13 +191,7 @@
.mask = CLOCKSOURCE_MASK((32 - MSM_DGT_SHIFT)),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
},
- .irq = {
- .name = "dg_timer",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_RISING,
- .handler = msm_timer_interrupt,
- .dev_id = &msm_clocks[1].clockevent,
- .irq = INT_DEBUG_TIMER_EXP
- },
+ .irq = INT_DEBUG_TIMER_EXP,
.freq = DGT_HZ >> MSM_DGT_SHIFT,
.shift = MSM_DGT_SHIFT,
}
@@ -261,10 +250,30 @@
printk(KERN_ERR "msm_timer_init: clocksource_register "
"failed for %s\n", cs->name);
- res = setup_irq(clock->irq.irq, &clock->irq);
+ ce->irq = clock->irq;
+ if (cpu_is_msm8x60() || cpu_is_msm8960()) {
+ clock->percpu_evt = alloc_percpu(struct clock_event_device *);
+ if (!clock->percpu_evt) {
+ pr_err("msm_timer_init: memory allocation "
+ "failed for %s\n", ce->name);
+ continue;
+ }
+
+ *__this_cpu_ptr(clock->percpu_evt) = ce;
+ res = request_percpu_irq(ce->irq, msm_timer_interrupt,
+ ce->name, clock->percpu_evt);
+ if (!res)
+ enable_percpu_irq(ce->irq, 0);
+ } else {
+ clock->evt = ce;
+ res = request_irq(ce->irq, msm_timer_interrupt,
+ IRQF_TIMER | IRQF_NOBALANCING | IRQF_TRIGGER_RISING,
+ ce->name, &clock->evt);
+ }
+
if (res)
- printk(KERN_ERR "msm_timer_init: setup_irq "
- "failed for %s\n", cs->name);
+ pr_err("msm_timer_init: request_irq failed for %s\n",
+ ce->name);
clockevents_register_device(ce);
}
@@ -273,6 +282,7 @@
#ifdef CONFIG_SMP
int __cpuinit local_timer_setup(struct clock_event_device *evt)
{
+ static bool local_timer_inited;
struct msm_clock *clock = &msm_clocks[MSM_GLOBAL_TIMER];
/* Use existing clock_event for cpu 0 */
@@ -281,12 +291,13 @@
writel(DGT_CLK_CTL_DIV_4, MSM_TMR_BASE + DGT_CLK_CTL);
- if (!local_clock_event) {
+ if (!local_timer_inited) {
writel(0, clock->regbase + TIMER_ENABLE);
writel(0, clock->regbase + TIMER_CLEAR);
writel(~0, clock->regbase + TIMER_MATCH_VAL);
+ local_timer_inited = true;
}
- evt->irq = clock->irq.irq;
+ evt->irq = clock->irq;
evt->name = "local_timer";
evt->features = CLOCK_EVT_FEAT_ONESHOT;
evt->rating = clock->clockevent.rating;
@@ -298,17 +309,17 @@
clockevent_delta2ns(0xf0000000 >> clock->shift, evt);
evt->min_delta_ns = clockevent_delta2ns(4, evt);
- local_clock_event = evt;
-
- gic_enable_ppi(clock->irq.irq);
+ *__this_cpu_ptr(clock->percpu_evt) = evt;
+ enable_percpu_irq(evt->irq, 0);
clockevents_register_device(evt);
return 0;
}
-inline int local_timer_ack(void)
+void local_timer_stop(struct clock_event_device *evt)
{
- return 1;
+ evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
+ disable_percpu_irq(evt->irq);
}
#endif
diff --git a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
index 20f3f12..0e94268 100644
--- a/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
+++ b/arch/arm/mach-mv78xx0/buffalo-wxl-setup.c
@@ -145,7 +145,7 @@
MACHINE_START(TERASTATION_WXL, "Buffalo Nas WXL")
/* Maintainer: Sebastien Requiem <sebastien@requiem.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wxl_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
index df5aebe..50b85ae 100644
--- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
+++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c
@@ -93,7 +93,7 @@
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
index 0489142..a7df02b 100644
--- a/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
+++ b/arch/arm/mach-mv78xx0/include/mach/debug-macro.S
@@ -8,7 +8,7 @@
#include <mach/mv78xx0.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =MV78XX0_REGS_PHYS_BASE
ldr \rv, =MV78XX0_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-mv78xx0/include/mach/memory.h b/arch/arm/mach-mv78xx0/include/mach/memory.h
deleted file mode 100644
index a648c51..0000000
--- a/arch/arm/mach-mv78xx0/include/mach/memory.h
+++ /dev/null
@@ -1,10 +0,0 @@
-/*
- * arch/arm/mach-mv78xx0/include/mach/memory.h
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
index d927f14..e85222e 100644
--- a/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
+++ b/arch/arm/mach-mv78xx0/rd78x00-masa-setup.c
@@ -78,7 +78,7 @@
MACHINE_START(RD78X00_MASA, "Marvell RD-78x00-MASA Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd78x00_masa_init,
.map_io = mv78xx0_map_io,
.init_early = mv78xx0_init_early,
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c
index 68934ea..e01af94 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-mx5/board-cpuimx51.c
@@ -293,7 +293,7 @@
MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c
index ff096d5..b41fc27 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-mx5/board-cpuimx51sd.c
@@ -331,7 +331,7 @@
MACHINE_START(EUKREA_CPUIMX51SD, "Eukrea CPUIMX51SD")
/* Maintainer: Eric Bénard <eric@eukrea.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c
index 07a3815..a50174e 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-mx5/board-mx51_3ds.c
@@ -169,7 +169,7 @@
MACHINE_START(MX51_3DS, "Freescale MX51 3-Stack Board")
/* Maintainer: Freescale Semiconductor, Inc. */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c
index 11b0ff6..468926a 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-mx5/board-mx51_babbage.c
@@ -416,7 +416,7 @@
MACHINE_START(MX51_BABBAGE, "Freescale MX51 Babbage Board")
/* Maintainer: Amit Kucheria <amit.kucheria@canonical.com> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c
index 551daf8..c36880d 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-mx5/board-mx51_efikamx.c
@@ -280,7 +280,7 @@
MACHINE_START(MX51_EFIKAMX, "Genesi EfikaMX nettop")
/* Maintainer: Amit Kucheria <amit.kucheria@linaro.org> */
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c
index 8a9bca2..ba5436a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-mx5/board-mx51_efikasb.c
@@ -266,7 +266,7 @@
};
MACHINE_START(MX51_EFIKASB, "Genesi Efika Smartbook")
- .boot_params = MX51_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
.map_io = mx51_map_io,
.init_early = imx51_init_early,
.init_irq = mx51_init_irq,
diff --git a/arch/arm/mach-mxs/include/mach/debug-macro.S b/arch/arm/mach-mxs/include/mach/debug-macro.S
index 79650a1..714570d 100644
--- a/arch/arm/mach-mxs/include/mach/debug-macro.S
+++ b/arch/arm/mach-mxs/include/mach/debug-macro.S
@@ -30,7 +30,7 @@
#define UART_VADDR MXS_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-mxs/include/mach/memory.h b/arch/arm/mach-mxs/include/mach/memory.h
deleted file mode 100644
index b5420a5..0000000
--- a/arch/arm/mach-mxs/include/mach/memory.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MXS_MEMORY_H__
-#define __MACH_MXS_MEMORY_H__
-
-#define PHYS_OFFSET UL(0x40000000)
-
-#endif /* __MACH_MXS_MEMORY_H__ */
diff --git a/arch/arm/mach-netx/include/mach/debug-macro.S b/arch/arm/mach-netx/include/mach/debug-macro.S
index 56a9152..247781e 100644
--- a/arch/arm/mach-netx/include/mach/debug-macro.S
+++ b/arch/arm/mach-netx/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00000a00
orr \rv, \rp, #io_p2v(0x00100000) @ virtual
orr \rp, \rp, #0x00100000 @ physical
diff --git a/arch/arm/mach-netx/include/mach/memory.h b/arch/arm/mach-netx/include/mach/memory.h
deleted file mode 100644
index 5956149..0000000
--- a/arch/arm/mach-netx/include/mach/memory.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * arch/arm/mach-netx/include/mach/memory.h
- *
- * Copyright (C) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
-
diff --git a/arch/arm/mach-netx/nxdb500.c b/arch/arm/mach-netx/nxdb500.c
index ca8b203..90903dd 100644
--- a/arch/arm/mach-netx/nxdb500.c
+++ b/arch/arm/mach-netx/nxdb500.c
@@ -200,7 +200,7 @@
}
MACHINE_START(NXDB500, "Hilscher nxdb500")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxdkn.c b/arch/arm/mach-netx/nxdkn.c
index d775cbe..c63384a 100644
--- a/arch/arm/mach-netx/nxdkn.c
+++ b/arch/arm/mach-netx/nxdkn.c
@@ -93,7 +93,7 @@
}
MACHINE_START(NXDKN, "Hilscher nxdkn")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-netx/nxeb500hmi.c b/arch/arm/mach-netx/nxeb500hmi.c
index de369cd..8f548ec 100644
--- a/arch/arm/mach-netx/nxeb500hmi.c
+++ b/arch/arm/mach-netx/nxeb500hmi.c
@@ -177,7 +177,7 @@
}
MACHINE_START(NXEB500HMI, "Hilscher nxeb500hmi")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = netx_map_io,
.init_irq = netx_init_irq,
.timer = &netx_timer,
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 97d7186..0cbb74c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -277,7 +277,7 @@
MACHINE_START(NOMADIK, "NHK8815")
/* Maintainer: ST MicroElectronics */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = cpu8815_map_io,
.init_irq = cpu8815_init_irq,
.timer = &nomadik_timer,
diff --git a/arch/arm/mach-nomadik/include/mach/debug-macro.S b/arch/arm/mach-nomadik/include/mach/debug-macro.S
index e7151b4..7354179 100644
--- a/arch/arm/mach-nomadik/include/mach/debug-macro.S
+++ b/arch/arm/mach-nomadik/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
add \rp, \rp, #0x000fb000
add \rv, \rp, #0xf0000000 @ virtual base
diff --git a/arch/arm/mach-nomadik/include/mach/memory.h b/arch/arm/mach-nomadik/include/mach/memory.h
deleted file mode 100644
index d332521..0000000
--- a/arch/arm/mach-nomadik/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * mach-nomadik/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/include/mach/memory.h b/arch/arm/mach-nuc93x/include/mach/memory.h
deleted file mode 100644
index ef9864b..0000000
--- a/arch/arm/mach-nuc93x/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-nuc93x/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-nuc93x/mach-nuc932evb.c b/arch/arm/mach-nuc93x/mach-nuc932evb.c
index d702570..1f741b1 100644
--- a/arch/arm/mach-nuc93x/mach-nuc932evb.c
+++ b/arch/arm/mach-nuc93x/mach-nuc932evb.c
@@ -35,7 +35,6 @@
MACHINE_START(NUC932EVB, "NUC932EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc932evb_map_io,
.init_irq = nuc93x_init_irq,
.init_machine = nuc932evb_init,
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index d86e9af2..4ea60e2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -385,7 +385,7 @@
MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
/* Maintainer: Jonathan McDowell <noodles@earth.li> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = ams_delta_map_io,
.reserve = omap_reserve,
.init_irq = ams_delta_init_irq,
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index dd814b3..31e089b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -388,7 +388,7 @@
MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
/* Maintainer: Brian Swetland <swetland@google.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.reserve = omap_reserve,
.init_irq = omap_fsample_init_irq,
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 8f7d115..05c6e9d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -93,7 +93,7 @@
MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
/* Maintainer: Tony Lindgren <tony@atomide.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_generic_map_io,
.reserve = omap_reserve,
.init_irq = omap_generic_init_irq,
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 0796ad7..c2e2791 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -460,7 +460,7 @@
MACHINE_START(OMAP_H2, "TI-H2")
/* Maintainer: Imre Deak <imre.deak@nokia.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h2_map_io,
.reserve = omap_reserve,
.init_irq = h2_init_irq,
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index fe1814c..8f5b6af 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -448,7 +448,7 @@
MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
/* Maintainer: Texas Instruments, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = h3_map_io,
.reserve = omap_reserve,
.init_irq = h3_init_irq,
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index 4af7bfa..fcd1a3c 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -610,7 +610,7 @@
MACHINE_START(HERALD, "HTC Herald")
/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
/* Maintainer: wing-linux.sourceforge.net */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = htcherald_map_io,
.reserve = omap_reserve,
.init_irq = htcherald_init_irq,
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index e603e5e..c2234ca 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -458,7 +458,7 @@
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
/* Maintainer: MontaVista Software, Inc. */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = innovator_map_io,
.reserve = omap_reserve,
.init_irq = innovator_init_irq,
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 8420535..02789c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -263,7 +263,7 @@
}
MACHINE_START(NOKIA770, "Nokia 770")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_nokia770_map_io,
.reserve = omap_reserve,
.init_irq = omap_nokia770_init_irq,
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index bf1ebe5..e4dca1d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -582,7 +582,7 @@
MACHINE_START(OMAP_OSK, "TI-OSK")
/* Maintainer: Dirk Behme <dirk.behme@de.bosch.com> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = osk_map_io,
.reserve = omap_reserve,
.init_irq = osk_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 45596b5..50c4e39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -274,7 +274,7 @@
}
MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmte_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmte_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index f942221..273771c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -321,7 +321,7 @@
}
MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmtt_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmtt_init_irq,
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 2b912d4..de36ade 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -341,7 +341,7 @@
}
MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_palmz71_map_io,
.reserve = omap_reserve,
.init_irq = omap_palmz71_init_irq,
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 7e2efe5..04b1bef 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -349,7 +349,7 @@
MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
/* Maintainer: Kevin Hilman <kjh@hilman.org> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.reserve = omap_reserve,
.init_irq = omap_perseus2_init_irq,
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 172a28f..2bea941 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -420,7 +420,7 @@
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = omap_sx1_map_io,
.reserve = omap_reserve,
.init_irq = omap_sx1_init_irq,
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 236b7de..940faed 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -301,7 +301,7 @@
MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
/* Maintainer: Ladislav Michl <michl@2n.cz> */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.map_io = voiceblue_map_io,
.reserve = omap_reserve,
.init_irq = voiceblue_init_irq,
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
index 6285604..2b36a28 100644
--- a/arch/arm/mach-omap1/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -13,13 +13,8 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0x0
omap_uart_virt: .word 0x0
@@ -31,26 +26,24 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-9: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+9: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ and \rp, pc, #0xff000000
+ ldr \rv, =OMAP_UART_INFO_OFS
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
10: cmp \rp, #0 @ no port configured?
@@ -74,17 +67,18 @@
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0xff000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0xff000000 @ phys base
add \rp, \rp, #0xfe000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
b 9b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100:
.endm
.macro senduart,rd,rx
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index e9b600c..c633764 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -2,4 +2,55 @@
* arch/arm/mach-omap1/include/mach/memory.h
*/
-#include <plat/memory.h>
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PLAT_PHYS_OFFSET UL(0x10000000)
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus. We do the address translation based on the
+ * device overriding the defaults used in the dma-mapping API.
+ * Note that the is_lbus_device() test is not very efficient on 1510
+ * because of the strncmp().
+ */
+#ifdef CONFIG_ARCH_OMAP15XX
+
+/*
+ * OMAP-1510 Local Bus address offset
+ */
+#define OMAP1510_LB_OFFSET UL(0x30000000)
+
+#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
+#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
+#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
+
+#define __arch_pfn_to_dma(dev, pfn) \
+ ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
+ if (is_lbus_device(dev)) \
+ __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
+ __dma; })
+
+#define __arch_dma_to_pfn(dev, addr) \
+ ({ dma_addr_t __dma = addr; \
+ if (is_lbus_device(dev)) \
+ __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
+ __phys_to_pfn(__dma); \
+ })
+
+#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
+ lbus_to_virt(addr) : \
+ __phys_to_virt(addr)); })
+
+#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
+ (dma_addr_t) (is_lbus_device(dev) ? \
+ virt_to_lbus(__addr) : \
+ __virt_to_phys(__addr)); })
+
+#endif /* CONFIG_ARCH_OMAP15XX */
+
+#endif
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 870886a..1cfa1b6 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -121,6 +121,7 @@
#endif
omap_sram_init();
+ omap_init_consistent_dma_size();
}
/*
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2028464..195157d 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -256,7 +256,7 @@
MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_2430sdp_map_io,
.init_early = omap_2430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index bd600cf..2430531 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -729,7 +729,7 @@
MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
/* Maintainer: Syed Khasim - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_3430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index e4f37b5..8b5b5aa 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,7 +215,7 @@
}
MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index c7cef44..be93110 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -838,7 +838,7 @@
MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_4430sdp_map_io,
.init_early = omap_4430sdp_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 933e935..db110fd 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,7 +98,7 @@
}
MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_crane_init_early,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index f3006c3..1325085 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -490,7 +490,7 @@
}
MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = am3517_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index 7021170..67800e6 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -350,7 +350,7 @@
MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_apollon_map_io,
.init_early = omap_apollon_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index 3af8aab..38179c1 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,7 +634,7 @@
}
MACHINE_START(CM_T35, "Compulab CM-T35")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
@@ -644,7 +644,7 @@
MACHINE_END
MACHINE_START(CM_T3730, "Compulab CM-T3730")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t35_init_early,
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 05c72f4..aed9c29 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,7 +299,7 @@
}
MACHINE_START(CM_T3517, "Compulab CM-T3517")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = cm_t3517_init_early,
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index b6002ec..99a4243 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -667,7 +667,7 @@
}
MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = devkit8000_init_early,
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index bb4af05..4431ad3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,7 +65,7 @@
/* XXX This machine entry name should be updated */
MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_generic_map_io,
.init_early = omap_generic_init_early,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index 95319e7..82421a4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -381,7 +381,7 @@
MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap_h4_map_io,
.init_early = omap_h4_init_early,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 35be778..7040352 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,7 +672,7 @@
}
MACHINE_START(IGEP0020, "IGEP v2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
@@ -682,7 +682,7 @@
MACHINE_END
MACHINE_START(IGEP0030, "IGEP OMAP3 module")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = igep_init_early,
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index ddff45c..abe8c7e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -332,7 +332,7 @@
}
MACHINE_START(OMAP_LDP, "OMAP LDP board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_ldp_init_early,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e11f0c5..6ce7481 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -695,7 +695,7 @@
}
MACHINE_START(NOKIA_N800, "Nokia N800")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
@@ -705,7 +705,7 @@
MACHINE_END
MACHINE_START(NOKIA_N810, "Nokia N810")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
@@ -715,7 +715,7 @@
MACHINE_END
MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = n8x0_map_io,
.init_early = n8x0_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 3ae16b4..1fde8a0 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -557,7 +557,7 @@
MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_beagle_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c452b3f..15c69a0 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,7 +681,7 @@
MACHINE_START(OMAP3EVM, "OMAP3 EVM")
/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_evm_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 703aeb5..01354a2 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -209,7 +209,7 @@
}
MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap3_init_irq,
@@ -218,7 +218,7 @@
MACHINE_END
MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
.init_early = omap3logic_init_early,
.init_irq = omap3_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 080d7bd..ace5693 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,7 +606,7 @@
}
MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3pandora_init_early,
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 8e10498..ba13e1d 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -494,7 +494,7 @@
MACHINE_START(SBC3530, "OMAP3 STALKER")
/* Maintainer: Jason Lam -lzg@ema-tech.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = omap3_map_io,
.init_early = omap3_stalker_init_early,
.init_irq = omap3_stalker_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index 852ea04..49e4bd2 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -404,7 +404,7 @@
MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3_touchbook_init_early,
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 9aaa960..683bede 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -583,7 +583,7 @@
MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
/* Maintainer: David Anders - Texas Instruments Inc */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap4_panda_map_io,
.init_early = omap4_panda_init_early,
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index f949a99..e592fb1 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -561,7 +561,7 @@
}
MACHINE_START(OVERO, "Gumstix Overo")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = overo_init_early,
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 7dfed24..9a8ce23 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -153,7 +153,7 @@
}
MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = rm680_map_io,
.init_early = rm680_init_early,
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 5ea142f..a6c473b 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -156,7 +156,7 @@
MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = rx51_reserve,
.map_io = rx51_map_io,
.init_early = rx51_init_early,
diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c
index a85d5b0..e41958a 100644
--- a/arch/arm/mach-omap2/board-ti8168evm.c
+++ b/arch/arm/mach-omap2/board-ti8168evm.c
@@ -48,7 +48,7 @@
MACHINE_START(TI8168EVM, "ti8168evm")
/* Maintainer: Texas Instruments */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = ti8168_evm_map_io,
.init_early = ti8168_init_early,
.init_irq = ti816x_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index 8a98c3c..72f1db4 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -133,7 +133,7 @@
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
@@ -143,7 +143,7 @@
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap_zoom_init_early,
diff --git a/arch/arm/mach-omap2/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index 48adfe9..13f98e5 100644
--- a/arch/arm/mach-omap2/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -13,15 +13,10 @@
#include <linux/serial_reg.h>
-#include <asm/memory.h>
-
#include <plat/serial.h>
#define UART_OFFSET(addr) ((addr) & 0x00ffffff)
-#define omap_uart_v2p(x) ((x) - PAGE_OFFSET + PLAT_PHYS_OFFSET)
-#define omap_uart_p2v(x) ((x) - PLAT_PHYS_OFFSET + PAGE_OFFSET)
-
.pushsection .data
omap_uart_phys: .word 0
omap_uart_virt: .word 0
@@ -34,26 +29,25 @@
* the desired UART phys and virt addresses temporarily into
* the omap_uart_phys and omap_uart_virt above.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* Use omap_uart_phys/virt if already configured */
-10: mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rp, =omap_uart_phys @ MMU enabled
- add \rv, \rp, #4 @ omap_uart_virt
- ldr \rp, [\rp, #0]
- ldr \rv, [\rv, #0]
+10: adr \rp, 99f @ get effective addr of 99f
+ ldr \rv, [\rp] @ get absolute addr of 99f
+ sub \rv, \rv, \rp @ offset between the two
+ ldr \rp, [\rp, #4] @ abs addr of omap_uart_phys
+ sub \tmp, \rp, \rv @ make it effective
+ ldr \rp, [\tmp, #0] @ omap_uart_phys
+ ldr \rv, [\tmp, #4] @ omap_uart_virt
cmp \rp, #0 @ is port configured?
cmpne \rv, #0
- bne 99f @ already configured
+ bne 100f @ already configured
/* Check the debug UART configuration set in uncompress.h */
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- ldreq \rp, =OMAP_UART_INFO @ MMU not enabled
- ldrne \rp, =omap_uart_p2v(OMAP_UART_INFO) @ MMU enabled
- ldr \rp, [\rp, #0]
+ mov \rp, pc
+ ldr \rv, =OMAP_UART_INFO_OFS
+ and \rp, \rp, #0xff000000
+ ldr \rp, [\rp, \rv]
/* Select the UART to use based on the UART1 scratchpad value */
cmp \rp, #0 @ no port configured?
@@ -106,50 +100,47 @@
b 98f
83: mov \rp, #UART_OFFSET(TI816X_UART3_BASE)
b 98f
+
95: ldr \rp, =ZOOM_UART_BASE
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
ldr \rp, =ZOOM_UART_VIRT
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << ZOOM_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
/* Store both phys and virt address for the uart */
98: add \rp, \rp, #0x48000000 @ phys base
- mrc p15, 0, \rv, c1, c0
- tst \rv, #1 @ MMU enabled?
- ldreq \rv, =omap_uart_v2p(omap_uart_phys) @ MMU disabled
- ldrne \rv, =omap_uart_phys @ MMU enabled
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #0] @ omap_uart_phys
sub \rp, \rp, #0x48000000 @ phys base
add \rp, \rp, #0xfa000000 @ virt base
- add \rv, \rv, #4 @ omap_uart_virt
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #4] @ omap_uart_virt
mov \rp, #(UART_LSR << OMAP_PORT_SHIFT)
- add \rv, \rv, #4 @ omap_uart_lsr
- str \rp, [\rv, #0]
+ str \rp, [\tmp, #8] @ omap_uart_lsr
b 10b
-99:
+
+ .align
+99: .word .
+ .word omap_uart_phys
+ .ltorg
+
+100: /* Pass the UART_LSR reg address */
+ ldr \tmp, [\tmp, #8] @ omap_uart_lsr
+ add \rp, \rp, \tmp
+ add \rv, \rv, \tmp
.endm
.macro senduart,rd,rx
- strb \rd, [\rx]
+ orr \rd, \rd, \rx, lsl #24 @ preserve LSR reg offset
+ bic \rx, \rx, #0xff @ get base (THR) reg address
+ strb \rd, [\rx] @ send lower byte of rd
+ orr \rx, \rx, \rd, lsr #24 @ restore original rx (LSR)
+ bic \rd, \rd, #(0xff << 24) @ restore original rd
.endm
.macro busyuart,rd,rx
-1001: mrc p15, 0, \rd, c1, c0
- tst \rd, #1 @ MMU enabled?
- ldreq \rd, =omap_uart_v2p(omap_uart_lsr) @ MMU disabled
- ldrne \rd, =omap_uart_lsr @ MMU enabled
- ldr \rd, [\rd, #0]
- ldrb \rd, [\rx, \rd]
+1001: ldrb \rd, [\rx] @ rx contains UART_LSR address
and \rd, \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
teq \rd, #(UART_LSR_TEMT | UART_LSR_THRE)
bne 1001b
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index ceb8b7e..feb90a1 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -78,7 +78,7 @@
4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
+ cmp \irqnr, #15
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
@@ -101,18 +101,6 @@
it cs
cmpcs \irqnr, \irqnr
.endm
-
- /* As above, this assumes that irqstat and base are preserved */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- itt eq
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
deleted file mode 100644
index ca6d32a..0000000
--- a/arch/arm/mach-omap2/include/mach/memory.h
+++ /dev/null
@@ -1,5 +0,0 @@
-/*
- * arch/arm/mach-omap2/include/mach/memory.h
- */
-
-#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 2ce1ce6..d6d01cb 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -16,7 +16,6 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -250,6 +249,7 @@
omap2_check_revision();
omap_sram_init();
+ omap_init_consistent_dma_size();
}
#ifdef CONFIG_SOC_OMAP2420
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index ce65e93..889464d 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -109,12 +109,10 @@
ncores = scu_get_core_count(scu_base);
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "OMAP4: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-orion5x/d2net-setup.c b/arch/arm/mach-orion5x/d2net-setup.c
index 19cf5bf..8c83009 100644
--- a/arch/arm/mach-orion5x/d2net-setup.c
+++ b/arch/arm/mach-orion5x/d2net-setup.c
@@ -336,7 +336,7 @@
#ifdef CONFIG_MACH_D2NET
MACHINE_START(D2NET, "LaCie d2 Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -348,7 +348,7 @@
#ifdef CONFIG_MACH_BIGDISK
MACHINE_START(BIGDISK, "LaCie Big Disk Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = d2net_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 6d771cb..4b79a80 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -358,7 +358,7 @@
MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = db88f5281_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 6fb4908..343f60e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -729,7 +729,7 @@
/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(DNS323, "D-Link DNS-323")
/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = dns323_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/edmini_v2-setup.c b/arch/arm/mach-orion5x/edmini_v2-setup.c
index b67cff0..70a4e92 100644
--- a/arch/arm/mach-orion5x/edmini_v2-setup.c
+++ b/arch/arm/mach-orion5x/edmini_v2-setup.c
@@ -251,7 +251,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(EDMINI_V2, "LaCie Ethernet Disk mini V2")
/* Maintainer: Christopher Moore <moore@free.fr> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = edmini_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/include/mach/debug-macro.S b/arch/arm/mach-orion5x/include/mach/debug-macro.S
index 5e3bf5b..f340ed8 100644
--- a/arch/arm/mach-orion5x/include/mach/debug-macro.S
+++ b/arch/arm/mach-orion5x/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
#include <mach/orion5x.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =ORION5X_REGS_PHYS_BASE
ldr \rv, =ORION5X_REGS_VIRT_BASE
orr \rp, \rp, #0x00012000
diff --git a/arch/arm/mach-orion5x/include/mach/memory.h b/arch/arm/mach-orion5x/include/mach/memory.h
deleted file mode 100644
index 6769917..0000000
--- a/arch/arm/mach-orion5x/include/mach/memory.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/*
- * arch/arm/mach-orion5x/include/mach/memory.h
- *
- * Marvell Orion memory definitions
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index f88f54b..d3cd3f6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -379,7 +379,7 @@
#ifdef CONFIG_MACH_KUROBOX_PRO
MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
@@ -392,7 +392,7 @@
#ifdef CONFIG_MACH_LINKSTATION_PRO
MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = kurobox_pro_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls-chl-setup.c b/arch/arm/mach-orion5x/ls-chl-setup.c
index 5065803..9503fff 100644
--- a/arch/arm/mach-orion5x/ls-chl-setup.c
+++ b/arch/arm/mach-orion5x/ls-chl-setup.c
@@ -318,7 +318,7 @@
MACHINE_START(LINKSTATION_LSCHL, "Buffalo Linkstation LiveV3 (LS-CHL)")
/* Maintainer: Ash Hughes <ashley.hughes@blueyonder.co.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lschl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
index 8503d0a..ed6d772 100644
--- a/arch/arm/mach-orion5x/ls_hgl-setup.c
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -265,7 +265,7 @@
MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ls_hgl_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/lsmini-setup.c b/arch/arm/mach-orion5x/lsmini-setup.c
index 9c82723..743f7f1 100644
--- a/arch/arm/mach-orion5x/lsmini-setup.c
+++ b/arch/arm/mach-orion5x/lsmini-setup.c
@@ -267,7 +267,7 @@
#ifdef CONFIG_MACH_LINKSTATION_MINI
MACHINE_START(LINKSTATION_MINI, "Buffalo Linkstation Mini")
/* Maintainer: Alexey Kopytko <alexey@kopytko.ru> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = lsmini_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c
index ef3bb8e..6020e26b 100644
--- a/arch/arm/mach-orion5x/mss2-setup.c
+++ b/arch/arm/mach-orion5x/mss2-setup.c
@@ -261,7 +261,7 @@
MACHINE_START(MSS2, "Maxtor Shared Storage II")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mss2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index 525eb12..201ae36 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -228,7 +228,7 @@
/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
MACHINE_START(MV2120, "HP Media Vault mv2120")
/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = mv2120_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
index e43b39c..6197c79 100644
--- a/arch/arm/mach-orion5x/net2big-setup.c
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -419,7 +419,7 @@
/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
MACHINE_START(NET2BIG, "LaCie 2Big Network")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = net2big_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 50aae6f..ebd6767 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -168,7 +168,7 @@
MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
/* Maintainer: Nicolas Pitre <nico@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_fxo_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 35f106a..05db2d3 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -180,7 +180,7 @@
MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5181l_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 9bb2b8b..e47fa05 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -305,7 +305,7 @@
MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f5182_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index 1d00df9..6431725 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -121,7 +121,7 @@
MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = rd88f6183ap_ge_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index c9dd31d..29f1526 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -357,7 +357,7 @@
MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
/* Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = tsp2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 764307b..31e51f9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -322,7 +322,7 @@
MACHINE_START(TS209, "QNAP TS-109/TS-209")
/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts209_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 0572dd1c..0fbcc14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -311,7 +311,7 @@
MACHINE_START(TS409, "QNAP TS-409")
/* Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = qnap_ts409_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
index 6b7b541..6c75cd3 100644
--- a/arch/arm/mach-orion5x/ts78xx-setup.c
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -621,7 +621,7 @@
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index cdad50b..b8be7d8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -172,7 +172,7 @@
MACHINE_START(WNR854T, "Netgear WNR854T")
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wnr854t_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 8f10ffd..faf81a0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -260,7 +260,7 @@
MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_machine = wrt350n_v2_init,
.map_io = orion5x_map_io,
.init_early = orion5x_init_early,
diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c
index 63399755..cdb95e7 100644
--- a/arch/arm/mach-pnx4008/core.c
+++ b/arch/arm/mach-pnx4008/core.c
@@ -264,7 +264,7 @@
MACHINE_START(PNX4008, "Philips PNX4008")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0x80000100,
+ .atag_offset = 0x100,
.map_io = pnx4008_map_io,
.init_irq = pnx4008_init_irq,
.init_machine = pnx4008_init,
diff --git a/arch/arm/mach-pnx4008/include/mach/debug-macro.S b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
index 931afeb..469d60d 100644
--- a/arch/arm/mach-pnx4008/include/mach/debug-macro.S
+++ b/arch/arm/mach-pnx4008/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00090000
add \rv, \rp, #0xf4000000 @ virtual
add \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pnx4008/include/mach/memory.h b/arch/arm/mach-pnx4008/include/mach/memory.h
deleted file mode 100644
index 1275db6..0000000
--- a/arch/arm/mach-pnx4008/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-pnx4008/include/mach/memory.h
- *
- * Copyright (c) 2005 Philips Semiconductors
- * Copyright (c) 2005 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-
-#endif
diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S
index bf75106..cd97492 100644
--- a/arch/arm/mach-prima2/include/mach/debug-macro.S
+++ b/arch/arm/mach-prima2/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
#include <mach/hardware.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical
ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual
.endm
diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h
deleted file mode 100644
index 368cd5a..0000000
--- a/arch/arm/mach-prima2/include/mach/memory.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * arch/arm/mach-prima2/include/mach/memory.h
- *
- * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- *
- * Licensed under GPLv2 or later.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-/*
- * Restrict DMA-able region to workaround silicon limitation.
- * The limitation restricts buffers available for DMA to SD/MMC
- * hardware to be below 256MB
- */
-#define ARM_DMA_ZONE_SIZE (SZ_256M)
-
-#endif
diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c
index 9cda205..66c6387e 100644
--- a/arch/arm/mach-prima2/l2x0.c
+++ b/arch/arm/mach-prima2/l2x0.c
@@ -13,7 +13,6 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <asm/hardware/cache-l2x0.h>
-#include <mach/memory.h>
#define L2X0_ADDR_FILTERING_START 0xC00
#define L2X0_ADDR_FILTERING_END 0xC04
@@ -41,9 +40,9 @@
/*
* set the physical memory windows L2 cache will cover
*/
- writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024,
+ writel_relaxed(PHYS_OFFSET + 1024 * 1024 * 1024,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END);
- writel_relaxed(PLAT_PHYS_OFFSET | 0x1,
+ writel_relaxed(PHYS_OFFSET | 0x1,
sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START);
writel_relaxed(0,
diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c
index f57124b..ee33c3d 100644
--- a/arch/arm/mach-prima2/prima2.c
+++ b/arch/arm/mach-prima2/prima2.c
@@ -31,11 +31,12 @@
MACHINE_START(PRIMA2_EVB, "prima2cb")
/* Maintainer: Barry Song <baohua.song@csr.com> */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.init_early = sirfsoc_of_clk_init,
.map_io = sirfsoc_map_lluart,
.init_irq = sirfsoc_of_irq_init,
.timer = &sirfsoc_timer,
+ .dma_zone_size = SZ_256M,
.init_machine = sirfsoc_mach_init,
.dt_compat = prima2cb_dt_match,
MACHINE_END
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index ef3e8b1..7765d67 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -828,5 +828,5 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = balloon3_init,
- .boot_params = PLAT_PHYS_OFFSET + 0x100,
+ .atag_offset = 0x100,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 648b0ab..4efc16d 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -148,7 +148,7 @@
MACHINE_START(CAPC7117,
"Embedian CAPC-7117 evaluation kit based on the MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index 13cf518..349896c 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -513,7 +513,7 @@
#endif
MACHINE_START(ARMCORE, "Compulab CM-X2XX")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = cmx2xx_map_io,
.nr_irqs = CMX2XX_NR_IRQS,
.init_irq = cmx2xx_init_irq,
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index b6a5134..9ac0225 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -852,7 +852,7 @@
}
MACHINE_START(CM_X300, "CM-X300 module")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 8709209..7db6646 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -306,7 +306,7 @@
}
MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
@@ -315,7 +315,7 @@
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa270_income_init,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 60a6781..c825e8b 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -183,7 +183,7 @@
}
MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa300_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index d2c6631..692e1ff 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -253,7 +253,7 @@
}
MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
- .boot_params = COLIBRI_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = colibri_pxa320_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index fe812ea..5e2cf39 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -272,7 +272,7 @@
}
MACHINE_START(CSB726, "Cogent CSB726")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 2e37ea5..94acc0b 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1299,7 +1299,7 @@
}
MACHINE_START(EM_X270, "Compulab EM-X270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
@@ -1308,7 +1308,7 @@
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index b4599ec..e823c54 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -189,7 +189,7 @@
MACHINE_START(E330, "Toshiba e330")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -239,7 +239,7 @@
MACHINE_START(E350, "Toshiba e350")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -362,7 +362,7 @@
MACHINE_START(E400, "Toshiba e400")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -551,7 +551,7 @@
MACHINE_START(E740, "Toshiba e740")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -743,7 +743,7 @@
MACHINE_START(E750, "Toshiba e750")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
@@ -948,7 +948,7 @@
MACHINE_START(E800, "Toshiba e800")
/* Maintainer: Ian Molton (spyro@f2s.com) */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.nr_irqs = ESERIES_NR_IRQS,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index b73eadb..8308eee 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -797,7 +797,7 @@
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -863,7 +863,7 @@
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -929,7 +929,7 @@
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1120,7 +1120,7 @@
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1186,7 +1186,7 @@
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
@@ -1226,7 +1226,7 @@
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index deaa111..9c8208c 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -233,7 +233,7 @@
}
MACHINE_START(GUMSTIX, "Gumstix")
- .boot_params = 0xa0000100, /* match u-boot bi_boot_params */
+ .atag_offset = 0x100, /* match u-boot bi_boot_params */
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 0a235128..4b5e110 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -203,7 +203,7 @@
}
MACHINE_START(H5400, "HP iPAQ H5000")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index a997d0ab..f2c3245 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -158,7 +158,7 @@
MACHINE_START(HIMALAYA, "HTC Himalaya")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index c748a47..6f6368e 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -838,7 +838,7 @@
}
MACHINE_START(H4700, "HP iPAQ HX4700")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = HX4700_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index d427429..f78d5db 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -191,7 +191,7 @@
}
MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
index 7d5c751..70b112e 100644
--- a/arch/arm/mach-pxa/include/mach/debug-macro.S
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -13,7 +13,7 @@
#include "hardware.h"
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00100000
orr \rv, \rp, #io_p2v(0x40000000) @ virtual
orr \rp, \rp, #0x40000000 @ physical
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
deleted file mode 100644
index d05a597..0000000
--- a/arch/arm/mach-pxa/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/mach-pxa/include/mach/memory.h
- *
- * Author: Nicolas Pitre
- * Copyright: (C) 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0xa0000000)
-
-#endif
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index d493a23..8d9200f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -18,6 +18,8 @@
#include <linux/io.h>
#include <linux/irq.h>
+#include <asm/exception.h>
+
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/gpio-pxa.h>
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 8f97e15..0037e57 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -437,7 +437,7 @@
}
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = LITTLETON_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a3acd96..64540d9 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -498,7 +498,7 @@
MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
/* Maintainer: Peter Barada */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = lpd270_map_io,
.nr_irqs = LPD270_NR_IRQS,
.init_irq = lpd270_init_irq,
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5fe5bcd..4b796c3 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -753,7 +753,7 @@
MACHINE_START(MAGICIAN, "HTC Magician")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.nr_irqs = MAGICIAN_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 6bc784bb..0567d39 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -615,7 +615,7 @@
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
- .boot_params = 0xa0000100, /* BLOB boot parameter setting */
+ .atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = mainstone_init_irq,
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 64810f9..b938fc2 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -751,7 +751,7 @@
}
MACHINE_START(MIOA701, "MIO A701")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = &pxa27x_map_io,
.init_irq = &pxa27x_init_irq,
.handle_irq = &pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index fb408861..4af5d51 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -92,7 +92,7 @@
/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
MACHINE_START(NEC_MP900, "MobilePro900/C")
- .boot_params = 0xa0220100,
+ .atag_offset = 0x220100,
.timer = &pxa_timer,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 6b77365..3d4a281 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -342,7 +342,7 @@
}
MACHINE_START(PALMLD, "Palm LifeDrive")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmld_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 9bd3e47..99d6bcf 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -202,7 +202,7 @@
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = palmt5_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ad4a6c..6ec7cae 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -537,7 +537,7 @@
};
MACHINE_START(PALMTC, "Palm Tungsten|C")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 664232f..9376da0 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -356,7 +356,7 @@
}
MACHINE_START(PALMTE2, "Palm Tungsten|E2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index bb27d4b..7346fbf 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -440,7 +440,7 @@
}
MACHINE_START(TREO680, "Palm Treo 680")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
@@ -450,7 +450,7 @@
MACHINE_END
MACHINE_START(CENTRO, "Palm Centro 685")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.reserve = treo_reserve,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index fc428558..2b9e76f 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -364,7 +364,7 @@
}
MACHINE_START(PALMTX, "Palm T|X")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = palmtx_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index e61c1cc..68e18ba 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -399,7 +399,7 @@
}
MACHINE_START(PALMZ72, "Palm Zire72")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index ffa65df..0b825a3 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -258,7 +258,7 @@
MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
/* Maintainer: Pengutronix */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pcm027_map_io,
.nr_irqs = PCM027_NR_IRQS,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index bbcd905..6810cdd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1086,7 +1086,7 @@
#ifdef CONFIG_MACH_RAUMFELD_RC
MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_controller_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1097,7 +1097,7 @@
#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_connector_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
@@ -1108,7 +1108,7 @@
#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
- .boot_params = RAUMFELD_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = raumfeld_speaker_init,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index df4356e..602d70b 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -596,7 +596,7 @@
MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index eb6a10d..3c988b6f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -103,7 +103,7 @@
}
MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = SAARB_NR_IRQS,
.init_irq = pxa95x_init_irq,
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3f8d0af..4c9a48b 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1004,7 +1004,7 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = imote2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
@@ -1016,6 +1016,6 @@
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = stargate2_init,
- .boot_params = 0xA0000100,
+ .atag_offset = 0x100,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index 32fb58e..ad47bb9 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -489,7 +489,7 @@
MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
/* Maintainer: Eric Miao <eric.miao@marvell.com> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd5a8ea..fd56916 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -125,7 +125,7 @@
}
MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = TAVOREVB3_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index c041750..35bbf13 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -554,7 +554,7 @@
MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
@@ -564,7 +564,7 @@
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
/* MAINTAINER("Jürgen Schindele") */
- .boot_params = TRIZEPS4_SDRAM_BASE + 0x100,
+ .atag_offset = 0x100,
.init_machine = trizeps4_init,
.map_io = trizeps4_map_io,
.init_irq = pxa27x_init_irq,
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d4a3dc7..242ddae 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -992,7 +992,7 @@
MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = viper_map_io,
.init_irq = viper_init_irq,
.handle_irq = pxa25x_handle_irq,
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 5f8490a..a7539a6 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -716,7 +716,7 @@
}
MACHINE_START(VPAC270, "Voipac PXA270")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index acc600f..54930cc 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -180,7 +180,7 @@
}
MACHINE_START(XCEP, "Iskratel XCEP")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.init_machine = xcep_init,
.map_io = pxa25x_map_io,
.init_irq = pxa25x_init_irq,
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index 6c9275a..84ed72d 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -686,7 +686,7 @@
*/
PSPR = 0x0;
local_irq_disable();
- pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET);
+ pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PHYS_OFFSET - PAGE_OFFSET);
}
#else
#define z2_power_off NULL
@@ -718,7 +718,7 @@
}
MACHINE_START(ZIPIT2, "Zipit Z2")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa27x_map_io,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 99c49bc..c424e7d 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -904,7 +904,7 @@
MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
/* Maintainer: Marc Zyngier <maz@misterjones.org> */
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = zeus_map_io,
.nr_irqs = ZEUS_NR_IRQS,
.init_irq = zeus_init_irq,
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 15ec66b..31d4968 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -422,7 +422,7 @@
}
MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
- .boot_params = 0xa0000100,
+ .atag_offset = 0x100,
.map_io = pxa3xx_map_io,
.nr_irqs = ZYLONITE_NR_IRQS,
.init_irq = pxa3xx_init_irq,
diff --git a/arch/arm/mach-realview/include/mach/debug-macro.S b/arch/arm/mach-realview/include/mach/debug-macro.S
index 90b687c..fb4901c 100644
--- a/arch/arm/mach-realview/include/mach/debug-macro.S
+++ b/arch/arm/mach-realview/include/mach/debug-macro.S
@@ -33,7 +33,7 @@
#error "Unknown RealView platform"
#endif
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xfb000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index 4ae943b..e83c654 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -52,12 +52,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "Realview: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 7a4e3b1..026c66a 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -463,7 +463,7 @@
MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_eb_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index ad5671a..7263dea 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -358,7 +358,7 @@
MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pb1176_fixup,
.map_io = realview_pb1176_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index b43644b..671ad6d 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -360,7 +360,7 @@
MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pb11mp_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index 763e8f3..cbf22df 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -310,7 +310,7 @@
MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_fixup,
.map_io = realview_pba8_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index 363b0ab..8ec7e52 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -393,7 +393,7 @@
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_early = realview_init_early,
diff --git a/arch/arm/mach-rpc/include/mach/debug-macro.S b/arch/arm/mach-rpc/include/mach/debug-macro.S
index 85effff..6d28cc9 100644
--- a/arch/arm/mach-rpc/include/mach/debug-macro.S
+++ b/arch/arm/mach-rpc/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00010000
orr \rp, \rp, #0x00000fe0
orr \rv, \rp, #0xe0000000 @ virtual
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 580b3c7..a9241eb 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -218,7 +218,7 @@
MACHINE_START(RISCPC, "Acorn-RiscPC")
/* Maintainer: Russell King */
- .boot_params = 0x10000100,
+ .atag_offset = 0x100,
.reserve_lp0 = 1,
.reserve_lp1 = 1,
.map_io = rpc_map_io,
diff --git a/arch/arm/mach-s3c2400/include/mach/memory.h b/arch/arm/mach-s3c2400/include/mach/memory.h
deleted file mode 100644
index 3f33670..0000000
--- a/arch/arm/mach-s3c2400/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c2400/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright 2007 Simtec Electronics
- * http://armlinux.simtec.co.uk/
- * Ben Dooks <ben@simtec.co.uk>
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x0C000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/include/mach/debug-macro.S b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
index 5882dea..4135de8 100644
--- a/arch/arm/mach-s3c2410/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c2410/include/mach/debug-macro.S
@@ -19,7 +19,7 @@
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c2410/include/mach/memory.h b/arch/arm/mach-s3c2410/include/mach/memory.h
deleted file mode 100644
index f92b97b..0000000
--- a/arch/arm/mach-s3c2410/include/mach/memory.h
+++ /dev/null
@@ -1,16 +0,0 @@
-/* arch/arm/mach-s3c2410/include/mach/memory.h
- * from arch/arm/mach-rpc/include/mach/memory.h
- *
- * Copyright (C) 1996,1997,1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x30000000)
-
-#endif
diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c
index dabc141..7983894 100644
--- a/arch/arm/mach-s3c2410/mach-amlm5900.c
+++ b/arch/arm/mach-s3c2410/mach-amlm5900.c
@@ -236,7 +236,7 @@
}
MACHINE_START(AML_M5900, "AML_M5900")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = amlm5900_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = amlm5900_init,
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 1e2d536..a20ae1a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -657,7 +657,7 @@
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = bast_init,
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index 2a2fa06..556c535 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -744,7 +744,7 @@
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = h1940_map_io,
.reserve = h1940_reserve,
.init_irq = h1940_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 079dcaa..1dc3e32 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -586,7 +586,7 @@
/* Maintainer: Christer Weinigel <christer@weinigel.se>,
Ben Dooks <ben-linux@fluff.org>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
@@ -596,7 +596,7 @@
MACHINE_START(N35, "Acer-N35")
/* Maintainer: Christer Weinigel <christer@weinigel.se>
*/
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.timer = &s3c24xx_timer,
.init_machine = n30_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index 0aa16cd..f03f3fd 100644
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -116,7 +116,7 @@
MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = otom11_map_io,
.init_machine = otom11_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index f44f775..367d376 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -344,7 +344,7 @@
}
MACHINE_START(QT2410, "QT2410")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = qt2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = qt2410_machine_init,
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index e17f033..99c9dfd 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -111,7 +111,7 @@
MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
* to SMDK2410 */
/* Maintainer: Jonas Dietsche */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = smdk2410_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = smdk2410_init,
diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c
index 43c2b83..e0d0b6f 100644
--- a/arch/arm/mach-s3c2410/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c
@@ -146,7 +146,7 @@
}
MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = tct_hammer_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = tct_hammer_init,
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 6ccce5a..df47e8e 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -400,7 +400,7 @@
MACHINE_START(VR1000, "Thorcom-VR1000")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = vr1000_map_io,
.init_machine = vr1000_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 5eeb475..286ef17 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -655,7 +655,7 @@
MACHINE_START(JIVE, "JIVE")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = jive_map_io,
diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c
index 834cfb6..d6325ede 100644
--- a/arch/arm/mach-s3c2412/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2412/mach-smdk2413.c
@@ -128,7 +128,7 @@
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2412, "SMDK2412")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
@@ -150,7 +150,7 @@
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 83544eb..5955c15 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -156,7 +156,7 @@
}
MACHINE_START(VSTMS, "VSTMS")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.fixup = vstms_fixup,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2416/mach-smdk2416.c b/arch/arm/mach-s3c2416/mach-smdk2416.c
index ac27ebb..a9eee53 100644
--- a/arch/arm/mach-s3c2416/mach-smdk2416.c
+++ b/arch/arm/mach-s3c2416/mach-smdk2416.c
@@ -245,7 +245,7 @@
MACHINE_START(SMDK2416, "SMDK2416")
/* Maintainer: Yauhen Kharuzhy <jekhor@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2416_map_io,
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index d708678..74f92fc 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -498,7 +498,7 @@
MACHINE_START(ANUBIS, "Simtec-Anubis")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = anubis_map_io,
.init_machine = anubis_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index 6c98b78..38887ee 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -233,7 +233,7 @@
MACHINE_START(AT2440EVB, "AT2440EVB")
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = at2440evb_map_io,
.init_machine = at2440evb_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c
index c10ddf4..de1e0ff 100644
--- a/arch/arm/mach-s3c2440/mach-gta02.c
+++ b/arch/arm/mach-s3c2440/mach-gta02.c
@@ -595,7 +595,7 @@
MACHINE_START(NEO1973_GTA02, "GTA02")
/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = gta02_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = gta02_machine_init,
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index fc2dc0b..91fe0b4 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -676,7 +676,7 @@
MACHINE_START(MINI2440, "MINI2440")
/* Maintainer: Michel Pollet <buserror@gmail.com> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = mini2440_map_io,
.init_machine = mini2440_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c
index 37dd306..61c0bf1 100644
--- a/arch/arm/mach-s3c2440/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2440/mach-nexcoder.c
@@ -151,7 +151,7 @@
MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
/* Maintainer: Guillaume GOURAT <guillaume.gourat@nexvision.tv> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = nexcoder_map_io,
.init_machine = nexcoder_init,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index d885363..dc142eb 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -447,7 +447,7 @@
MACHINE_START(OSIRIS, "Simtec-OSIRIS")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = osiris_map_io,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
diff --git a/arch/arm/mach-s3c2440/mach-rx1950.c b/arch/arm/mach-s3c2440/mach-rx1950.c
index 27ea950..684dbb3 100644
--- a/arch/arm/mach-s3c2440/mach-rx1950.c
+++ b/arch/arm/mach-s3c2440/mach-rx1950.c
@@ -825,7 +825,7 @@
MACHINE_START(RX1950, "HP iPAQ RX1950")
/* Maintainers: Vasily Khoruzhick */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx1950_map_io,
.reserve = rx1950_reserve,
.init_irq = s3c24xx_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index 1472b1a..e19499c 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -218,7 +218,7 @@
MACHINE_START(RX3715, "IPAQ-RX3715")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.map_io = rx3715_map_io,
.reserve = rx3715_reserve,
.init_irq = rx3715_init_irq,
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index eedfe0f..36eeb41 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -175,7 +175,7 @@
MACHINE_START(S3C2440, "SMDK2440")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2440_map_io,
diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c
index 514275e..bec107e 100644
--- a/arch/arm/mach-s3c2443/mach-smdk2443.c
+++ b/arch/arm/mach-s3c2443/mach-smdk2443.c
@@ -139,7 +139,7 @@
MACHINE_START(SMDK2443, "SMDK2443")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C2410_SDRAM_PA + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2443_map_io,
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 6c498f9..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/map.h>
@@ -143,6 +144,7 @@
/* initialise the io descriptors we need for initialisation */
iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
iotable_init(mach_desc, size);
+ init_consistent_dma_size(SZ_8M);
/* detect cpu id */
s3c64xx_init_cpu();
diff --git a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
index a29e705..c0c076a 100644
--- a/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
+++ b/arch/arm/mach-s3c64xx/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = (S3C_VA_UART + S3C_PA_UART & 0xfffff)
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s3c64xx/include/mach/memory.h b/arch/arm/mach-s3c64xx/include/mach/memory.h
deleted file mode 100644
index 4760cda..0000000
--- a/arch/arm/mach-s3c64xx/include/mach/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/* arch/arm/mach-s3c6400/include/mach/memory.h
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
- * http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x50000000)
-
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif
diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c
index cb88643..d164a28 100644
--- a/arch/arm/mach-s3c64xx/mach-anw6410.c
+++ b/arch/arm/mach-s3c64xx/mach-anw6410.c
@@ -233,7 +233,7 @@
MACHINE_START(ANW6410, "A&W6410")
/* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = anw6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index af0c2fe..4c76e084 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -766,7 +766,7 @@
MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410")
/* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = crag6410_map_io,
.init_machine = crag6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index b3d93cc..19a0887 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -265,7 +265,7 @@
MACHINE_START(HMT, "Airgoo-HMT")
/* Maintainer: Peter Korsgaard <jacmet@sunsite.dk> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = hmt_map_io,
.init_machine = hmt_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 527f49b..e91f63f 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -349,7 +349,7 @@
MACHINE_START(MINI6410, "MINI6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = mini6410_map_io,
.init_machine = mini6410_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c
index 01c6857..c30f2e5 100644
--- a/arch/arm/mach-s3c64xx/mach-ncp.c
+++ b/arch/arm/mach-s3c64xx/mach-ncp.c
@@ -97,7 +97,7 @@
MACHINE_START(NCP, "NCP")
/* Maintainer: Samsung Electronics */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = ncp_map_io,
.init_machine = ncp_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 95b04b1..10870cb 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -329,7 +329,7 @@
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c
index 342e8df..cbb57de 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq5.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq5.c
@@ -146,7 +146,7 @@
MACHINE_START(SMARTQ5, "SmartQ 5")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq5_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c
index 5796397..04f914b 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq7.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq7.c
@@ -162,7 +162,7 @@
MACHINE_START(SMARTQ7, "SmartQ 7")
/* Maintainer: Maurus Cuelenaere <mcuelenaere AT gmail DOT com> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smartq_map_io,
.init_machine = smartq7_machine_init,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c
index 3cca642..6fd5e95 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6400.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c
@@ -85,7 +85,7 @@
MACHINE_START(SMDK6400, "SMDK6400")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6400_init_irq,
.map_io = smdk6400_map_io,
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index a9f3183..7b66ede 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -703,7 +703,7 @@
MACHINE_START(SMDK6410, "SMDK6410")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
- .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s3c6410_init_irq,
.map_io = smdk6410_map_io,
diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c
index a5c0095..8a93854 100644
--- a/arch/arm/mach-s5p64x0/cpu.c
+++ b/arch/arm/mach-s5p64x0/cpu.c
@@ -20,6 +20,7 @@
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -111,6 +112,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
void __init s5p6450_map_io(void)
@@ -120,6 +122,7 @@
iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc));
iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc));
+ init_consistent_dma_size(SZ_8M);
}
/*
diff --git a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
index 79b04e6..e80ba3c 100644
--- a/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5p64x0/include/mach/debug-macro.S
@@ -15,7 +15,7 @@
#include <plat/regs-serial.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xE0000000
orr \rp, \rp, #0x00100000
ldr \rp, [\rp, #0x118 ]
diff --git a/arch/arm/mach-s5p64x0/include/mach/memory.h b/arch/arm/mach-s5p64x0/include/mach/memory.h
deleted file mode 100644
index 365a6eb..0000000
--- a/arch/arm/mach-s5p64x0/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/* linux/arch/arm/mach-s5p64x0/include/mach/memory.h
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * S5P64X0 - Memory definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H __FILE__
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#endif /* __ASM_ARCH_MEMORY_H */
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c
index 346f8df..3b84e9b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6440.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c
@@ -171,7 +171,7 @@
MACHINE_START(SMDK6440, "SMDK6440")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6440_init_irq,
.map_io = smdk6440_map_io,
diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c
index 33f2adf..d99d29b 100644
--- a/arch/arm/mach-s5p64x0/mach-smdk6450.c
+++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c
@@ -190,7 +190,7 @@
MACHINE_START(SMDK6450, "SMDK6450")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P64X0_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5p6450_init_irq,
.map_io = smdk6450_map_io,
diff --git a/arch/arm/mach-s5pc100/include/mach/debug-macro.S b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
index b2ba95d..694f759 100644
--- a/arch/arm/mach-s5pc100/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pc100/include/mach/debug-macro.S
@@ -22,7 +22,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pc100/include/mach/memory.h b/arch/arm/mach-s5pc100/include/mach/memory.h
deleted file mode 100644
index bda4e79..0000000
--- a/arch/arm/mach-s5pc100/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/* arch/arm/mach-s5pc100/include/mach/memory.h
- *
- * Copyright 2008 Samsung Electronics Co.
- * Byungho Min <bhmin@samsung.com>
- *
- * Based on mach-s3c6400/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 227d890..688f45b 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -254,7 +254,7 @@
MACHINE_START(SMDKC100, "SMDKC100")
/* Maintainer: Byungho Min <bhmin@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pc100_init_irq,
.map_io = smdkc100_map_io,
.init_machine = smdkc100_machine_init,
diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c
index 79907ec..9114572 100644
--- a/arch/arm/mach-s5pv210/cpu.c
+++ b/arch/arm/mach-s5pv210/cpu.c
@@ -20,6 +20,7 @@
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
+#include <linux/dma-mapping.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -119,6 +120,7 @@
void __init s5pv210_map_io(void)
{
iotable_init(s5pv210_iodesc, ARRAY_SIZE(s5pv210_iodesc));
+ init_consistent_dma_size(14 << 20);
/* initialise device information early */
s5pv210_default_sdhci0();
diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
index 169fe65..79e5559 100644
--- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S
+++ b/arch/arm/mach-s5pv210/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
* aligned and add in the offset when we load the value here.
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, = S3C_PA_UART
ldr \rv, = S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
diff --git a/arch/arm/mach-s5pv210/include/mach/memory.h b/arch/arm/mach-s5pv210/include/mach/memory.h
index 7b5fcf0..2d3cfa2 100644
--- a/arch/arm/mach-s5pv210/include/mach/memory.h
+++ b/arch/arm/mach-s5pv210/include/mach/memory.h
@@ -14,7 +14,6 @@
#define __ASM_ARCH_MEMORY_H
#define PLAT_PHYS_OFFSET UL(0x20000000)
-#define CONSISTENT_DMA_SIZE (SZ_8M + SZ_4M + SZ_2M)
/*
* Sparsemem support
diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c
index 509627f..5811a96 100644
--- a/arch/arm/mach-s5pv210/mach-aquila.c
+++ b/arch/arm/mach-s5pv210/mach-aquila.c
@@ -678,7 +678,7 @@
/* Maintainers:
Marek Szyprowski <m.szyprowski@samsung.com>
Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = aquila_map_io,
.init_machine = aquila_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index 85c2d51..061cc7e 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -897,7 +897,7 @@
MACHINE_START(GONI, "GONI")
/* Maintainers: Kyungmin Park <kyungmin.park@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = goni_map_io,
.init_machine = goni_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 6c412c8..f7266bb 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -136,7 +136,7 @@
MACHINE_START(SMDKC110, "SMDKC110")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 5e011fc..e73e3b6d 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -319,7 +319,7 @@
MACHINE_START(SMDKV210, "SMDKV210")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
diff --git a/arch/arm/mach-s5pv210/mach-torbreck.c b/arch/arm/mach-s5pv210/mach-torbreck.c
index 925fc0d..97cc066 100644
--- a/arch/arm/mach-s5pv210/mach-torbreck.c
+++ b/arch/arm/mach-s5pv210/mach-torbreck.c
@@ -125,7 +125,7 @@
MACHINE_START(TORBRECK, "TORBRECK")
/* Maintainer: Hyunchul Ko <ghcstop@gmail.com> */
- .boot_params = S5P_PA_SDRAM + 0x100,
+ .atag_offset = 0x100,
.init_irq = s5pv210_init_irq,
.map_io = torbreck_map_io,
.init_machine = torbreck_machine_init,
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 26257df..d40da5f 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -447,7 +447,7 @@
MACHINE_START(ASSABET, "Intel-Assabet")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.fixup = fixup_assabet,
.map_io = assabet_map_io,
.init_irq = sa1100_init_irq,
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b4311b0..bda83e1 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -302,7 +302,7 @@
}
MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = badge4_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index 03d7376..b30733a 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -84,7 +84,7 @@
}
MACHINE_START(H3100, "Compaq iPAQ H3100")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3100_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 965f64a..6fd324d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -125,7 +125,7 @@
}
MACHINE_START(H3600, "Compaq iPAQ H3600")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = h3600_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index db5e434..30f4a55 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -195,7 +195,7 @@
*/
MACHINE_START(HACKKIT, "HackKit Cpu Board")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = hackkit_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/include/mach/debug-macro.S b/arch/arm/mach-sa1100/include/mach/debug-macro.S
index 0cd0fc9..530772d 100644
--- a/arch/arm/mach-sa1100/include/mach/debug-macro.S
+++ b/arch/arm/mach-sa1100/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mrc p15, 0, \rp, c1, c0
tst \rp, #1 @ MMU enabled?
moveq \rp, #0x80000000 @ physical base address
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 176c066..0bb520d 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -364,7 +364,7 @@
MACHINE_START(JORNADA720, "HP Jornada 720")
/* Maintainer: Kristoffer Ericson <Kristoffer.Ericson@gmail.com> */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = jornada720_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 7b9556b..5bc59d0 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -61,7 +61,7 @@
}
MACHINE_START(LART, "LART")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = lart_map_io,
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 72087f0..032f388 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -111,7 +111,7 @@
}
MACHINE_START(NANOENGINE, "BSE nanoEngine")
- .boot_params = 0xc0000000,
+ .atag_offset = 0x100,
.map_io = nanoengine_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 7917b24..1cccbf5 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -82,7 +82,7 @@
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = shannon_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index cfb7607..a1c2427 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -229,7 +229,7 @@
MACHINE_START(SIMPAD, "Simpad")
/* Maintainer: Holger Freyther */
- .boot_params = 0xc0000100,
+ .atag_offset = 0x100,
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index ac2873c..feda3ca 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -152,7 +152,7 @@
MACHINE_START(SHARK, "Shark")
/* Maintainer: Alexander Schulz */
- .boot_params = 0x08003000,
+ .atag_offset = 0x3000,
.map_io = shark_map_io,
.init_irq = shark_init_irq,
.timer = &shark_timer,
diff --git a/arch/arm/mach-shark/include/mach/debug-macro.S b/arch/arm/mach-shark/include/mach/debug-macro.S
index a473f55..20eb2bf 100644
--- a/arch/arm/mach-shark/include/mach/debug-macro.S
+++ b/arch/arm/mach-shark/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0xe0000000
orr \rp, \rp, #0x000003f8
mov \rv, \rp
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index cdfdd62..5fde49d 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -37,6 +37,7 @@
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/mfd/tmio.h>
#include <linux/sh_clk.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_lcdc.h>
#include <video/sh_mipi_dsi.h>
#include <sound/sh_fsi.h>
@@ -447,6 +448,8 @@
static void __init ag5evm_map_io(void)
{
iotable_init(ag5evm_io_desc, ARRAY_SIZE(ag5evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh73a0_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 523f608..b622d8d 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -42,6 +42,7 @@
#include <linux/leds.h>
#include <linux/input/sh_keysc.h>
#include <linux/usb/r8a66597.h>
+#include <linux/dma-mapping.h>
#include <media/sh_mobile_ceu.h>
#include <media/sh_mobile_csi2.h>
@@ -1170,6 +1171,8 @@
static void __init ap4evb_map_io(void)
{
iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c
index ef4613b..8b620bf 100644
--- a/arch/arm/mach-shmobile/board-g3evm.c
+++ b/arch/arm/mach-shmobile/board-g3evm.c
@@ -32,6 +32,7 @@
#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/input/sh_keysc.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7367.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -260,6 +261,8 @@
static void __init g3evm_map_io(void)
{
iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7367_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c
index 8e3c555..7719ddc 100644
--- a/arch/arm/mach-shmobile/board-g4evm.c
+++ b/arch/arm/mach-shmobile/board-g4evm.c
@@ -33,6 +33,7 @@
#include <linux/mmc/host.h>
#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/sh7377.h>
#include <mach/common.h>
#include <asm/mach-types.h>
@@ -274,6 +275,8 @@
static void __init g4evm_map_io(void)
{
iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7377_add_early_devices();
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 17c19dc..de2253d 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -45,6 +45,7 @@
#include <linux/tca6416_keypad.h>
#include <linux/usb/r8a66597.h>
#include <linux/usb/renesas_usbhs.h>
+#include <linux/dma-mapping.h>
#include <video/sh_mobile_hdmi.h>
#include <video/sh_mobile_lcdc.h>
@@ -1381,6 +1382,8 @@
static void __init mackerel_map_io(void)
{
iotable_init(mackerel_io_desc, ARRAY_SIZE(mackerel_io_desc));
+ /* DMA memory at 0xf6000000 - 0xffdfffff */
+ init_consistent_dma_size(158 << 20);
/* setup early devices and console here as well */
sh7372_add_early_devices();
diff --git a/arch/arm/mach-shmobile/entry-intc.S b/arch/arm/mach-shmobile/entry-intc.S
index cac0a7a..1a1c00c 100644
--- a/arch/arm/mach-shmobile/entry-intc.S
+++ b/arch/arm/mach-shmobile/entry-intc.S
@@ -51,7 +51,4 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
arch_irq_handler shmobile_handle_irq_intc
diff --git a/arch/arm/mach-shmobile/include/mach/entry-macro.S b/arch/arm/mach-shmobile/include/mach/entry-macro.S
index d791f10..8d4a416 100644
--- a/arch/arm/mach-shmobile/include/mach/entry-macro.S
+++ b/arch/arm/mach-shmobile/include/mach/entry-macro.S
@@ -27,8 +27,5 @@
.macro test_for_ipi, irqnr, irqstat, base, tmp
.endm
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- .endm
-
.macro arch_ret_to_user, tmp1, tmp2
.endm
diff --git a/arch/arm/mach-shmobile/include/mach/memory.h b/arch/arm/mach-shmobile/include/mach/memory.h
index ad00c3c..0ffbe81 100644
--- a/arch/arm/mach-shmobile/include/mach/memory.h
+++ b/arch/arm/mach-shmobile/include/mach/memory.h
@@ -4,7 +4,4 @@
#define PLAT_PHYS_OFFSET UL(CONFIG_MEMORY_START)
#define MEM_SIZE UL(CONFIG_MEMORY_SIZE)
-/* DMA memory at 0xf6000000 - 0xffdfffff */
-#define CONSISTENT_DMA_SIZE (158 << 20)
-
#endif /* __ASM_MACH_MEMORY_H */
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 66f9806..e4e485f 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -56,6 +56,12 @@
unsigned int ncores = shmobile_smp_get_core_count();
unsigned int i;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; i++)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-spear3xx/include/mach/memory.h b/arch/arm/mach-spear3xx/include/mach/memory.h
deleted file mode 100644
index 5173522..0000000
--- a/arch/arm/mach-spear3xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear3xx/include/mach/memory.h
- *
- * Memory map for SPEAr3xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
index 69006f6..a5ff98e 100644
--- a/arch/arm/mach-spear3xx/spear300_evb.c
+++ b/arch/arm/mach-spear3xx/spear300_evb.c
@@ -64,7 +64,7 @@
}
MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
index c8684ce..45d180d 100644
--- a/arch/arm/mach-spear3xx/spear310_evb.c
+++ b/arch/arm/mach-spear3xx/spear310_evb.c
@@ -70,7 +70,7 @@
}
MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
index a12b353..2287984 100644
--- a/arch/arm/mach-spear3xx/spear320_evb.c
+++ b/arch/arm/mach-spear3xx/spear320_evb.c
@@ -68,7 +68,7 @@
}
MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear3xx_map_io,
.init_irq = spear3xx_init_irq,
.timer = &spear3xx_timer,
diff --git a/arch/arm/mach-spear6xx/include/mach/memory.h b/arch/arm/mach-spear6xx/include/mach/memory.h
deleted file mode 100644
index 781f088..0000000
--- a/arch/arm/mach-spear6xx/include/mach/memory.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * arch/arm/mach-spear6xx/include/mach/memory.h
- *
- * Memory map for SPEAr6xx machine family
- *
- * Copyright (C) 2009 ST Microelectronics
- * Rajeev Kumar<rajeev-dlh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __MACH_MEMORY_H
-#define __MACH_MEMORY_H
-
-#include <plat/memory.h>
-
-#endif /* __MACH_MEMORY_H */
diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
index f19cefe..8238fe3 100644
--- a/arch/arm/mach-spear6xx/spear600_evb.c
+++ b/arch/arm/mach-spear6xx/spear600_evb.c
@@ -43,7 +43,7 @@
}
MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = spear6xx_map_io,
.init_irq = spear6xx_init_irq,
.timer = &spear6xx_timer,
diff --git a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
index 4cb3c2d..777a5bb 100644
--- a/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
+++ b/arch/arm/mach-tcc8k/board-tcc8000-sdk.c
@@ -73,7 +73,7 @@
}
MACHINE_START(TCC8000_SDK, "Telechips TCC8000-SDK Demo Board")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = tcc8k_map_io,
.init_irq = tcc8k_init_irq,
.init_machine = tcc8k_init,
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index 987dab5..5835225 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -182,7 +182,7 @@
}
MACHINE_START(HARMONY, "harmony")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_harmony_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index ac809b6..39363e5 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -185,7 +185,7 @@
}
MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_paz00_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 25446df..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -280,7 +280,7 @@
MACHINE_START(SEABOARD, "seaboard")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -289,7 +289,7 @@
MACHINE_END
MACHINE_START(KAEN, "kaen")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
@@ -298,7 +298,7 @@
MACHINE_END
MACHINE_START(WARIO, "wario")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
.init_irq = tegra_init_irq,
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index c3aff9f..9908894 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -171,7 +171,7 @@
}
MACHINE_START(TRIMSLICE, "trimslice")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.fixup = tegra_trimslice_fixup,
.map_io = tegra_map_common_io,
.init_early = tegra_init_early,
diff --git a/arch/arm/mach-tegra/include/mach/debug-macro.S b/arch/arm/mach-tegra/include/mach/debug-macro.S
index e0ebe65..619abc6 100644
--- a/arch/arm/mach-tegra/include/mach/debug-macro.S
+++ b/arch/arm/mach-tegra/include/mach/debug-macro.S
@@ -21,7 +21,7 @@
#include <mach/io.h>
#include <mach/iomap.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =IO_APB_PHYS @ physical
ldr \rv, =IO_APB_VIRT @ virtual
orr \rp, \rp, #(TEGRA_DEBUG_UART_BASE & 0xFF)
diff --git a/arch/arm/mach-tegra/include/mach/memory.h b/arch/arm/mach-tegra/include/mach/memory.h
deleted file mode 100644
index 537db3aa..0000000
--- a/arch/arm/mach-tegra/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/memory.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- * Colin Cross <ccross@google.com>
- * Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_MEMORY_H
-#define __MACH_TEGRA_MEMORY_H
-
-/* physical offset of RAM */
-#define PLAT_PHYS_OFFSET UL(0)
-
-#endif
-
diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c
index 0886cbc..7d2b5d0 100644
--- a/arch/arm/mach-tegra/platsmp.c
+++ b/arch/arm/mach-tegra/platsmp.c
@@ -114,10 +114,10 @@
{
unsigned int i, ncores = scu_get_core_count(scu_base);
- if (ncores > NR_CPUS) {
- printk(KERN_ERR "Tegra: no. of cores (%u) greater than configured (%u), clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index fd435f4..22c5ab7 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -25,6 +25,7 @@
#include <linux/err.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/fsmc.h>
+#include <linux/dma-mapping.h>
#include <asm/types.h>
#include <asm/setup.h>
@@ -93,6 +94,8 @@
void __init u300_map_io(void)
{
iotable_init(u300_io_desc, ARRAY_SIZE(u300_io_desc));
+ /* We enable a real big DMA buffer if need be. */
+ init_consistent_dma_size(SZ_4M);
}
/*
diff --git a/arch/arm/mach-u300/include/mach/debug-macro.S b/arch/arm/mach-u300/include/mach/debug-macro.S
index df71570..8ae8e4a 100644
--- a/arch/arm/mach-u300/include/mach/debug-macro.S
+++ b/arch/arm/mach-u300/include/mach/debug-macro.S
@@ -10,7 +10,7 @@
*/
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
/* If we move the address using MMU, use this. */
ldr \rp, = U300_SLOW_PER_PHYS_BASE @ MMU off, physical address
ldr \rv, = U300_SLOW_PER_VIRT_BASE @ MMU on, virtual address
diff --git a/arch/arm/mach-u300/include/mach/memory.h b/arch/arm/mach-u300/include/mach/memory.h
index 888e2e3..7034bae 100644
--- a/arch/arm/mach-u300/include/mach/memory.h
+++ b/arch/arm/mach-u300/include/mach/memory.h
@@ -16,7 +16,7 @@
#ifdef CONFIG_MACH_U300_DUAL_RAM
#define PLAT_PHYS_OFFSET UL(0x48000000)
-#define BOOT_PARAMS_OFFSET (PHYS_OFFSET + 0x100)
+#define BOOT_PARAMS_OFFSET 0x100
#else
@@ -24,19 +24,14 @@
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE - \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET (0x100 + \
+ (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1)*1024*1024*2)
#else
#define PLAT_PHYS_OFFSET (0x28000000 + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
(CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024)
+#define BOOT_PARAMS_OFFSET 0x100
#endif
-#define BOOT_PARAMS_OFFSET (0x28000000 + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE + \
- (CONFIG_MACH_U300_ACCESS_MEM_SIZE & 1))*1024*1024 + 0x100)
#endif
-/*
- * We enable a real big DMA buffer if need be.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-
#endif
diff --git a/arch/arm/mach-u300/u300.c b/arch/arm/mach-u300/u300.c
index 48b3b7f..80e7305 100644
--- a/arch/arm/mach-u300/u300.c
+++ b/arch/arm/mach-u300/u300.c
@@ -61,7 +61,7 @@
MACHINE_START(U300, MACH_U300_STRING)
/* Maintainer: Linus Walleij <linus.walleij@stericsson.com> */
- .boot_params = BOOT_PARAMS_OFFSET,
+ .atag_offset = BOOT_PARAMS_OFFSET,
.map_io = u300_map_io,
.reserve = u300_reserve,
.init_irq = u300_init_irq,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 537ab63..f67b83d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -646,7 +646,7 @@
MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
@@ -655,7 +655,7 @@
MACHINE_END
MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
@@ -663,7 +663,7 @@
MACHINE_END
MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
- .boot_params = 0x100,
+ .atag_offset = 0x100,
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 2d9e191..e014aa7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -118,7 +118,7 @@
}
MACHINE_START(U5500, "ST-Ericsson U5500 Platform")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = u5500_map_io,
.init_irq = ux500_init_irq,
.timer = &ux500_timer,
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
index 700fb05..8d74d92 100644
--- a/arch/arm/mach-ux500/include/mach/debug-macro.S
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -35,7 +35,7 @@
#define UX500_UART(n) __UX500_UART(n)
#define UART_BASE UX500_UART(CONFIG_UX500_DEBUG_UART)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_BASE @ no, physical address
ldr \rv, =IO_ADDRESS(UART_BASE) @ yes, virtual address
.endm
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
deleted file mode 100644
index 2ef697a..0000000
--- a/arch/arm/mach-ux500/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 2009 ST-Ericsson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-#define BUS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index a33df5f..eb51991 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -156,12 +156,10 @@
ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
- if (ncores > NR_CPUS) {
- printk(KERN_WARNING
- "U8500: no. of cores (%d) greater than configured "
- "maximum of %d - clipping\n",
- ncores, NR_CPUS);
- ncores = NR_CPUS;
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
}
for (i = 0; i < ncores; i++)
diff --git a/arch/arm/mach-versatile/include/mach/debug-macro.S b/arch/arm/mach-versatile/include/mach/debug-macro.S
index eb2cf7d..d0fbd7f 100644
--- a/arch/arm/mach-versatile/include/mach/debug-macro.S
+++ b/arch/arm/mach-versatile/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x001F0000
orr \rp, \rp, #0x00001000
orr \rv, \rp, #0xf1000000 @ virtual base
diff --git a/arch/arm/mach-versatile/include/mach/memory.h b/arch/arm/mach-versatile/include/mach/memory.h
deleted file mode 100644
index dacc9d8..0000000
--- a/arch/arm/mach-versatile/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-versatile/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-versatile/versatile_ab.c b/arch/arm/mach-versatile/versatile_ab.c
index f8ae64b..fda4866 100644
--- a/arch/arm/mach-versatile/versatile_ab.c
+++ b/arch/arm/mach-versatile/versatile_ab.c
@@ -35,7 +35,7 @@
MACHINE_START(VERSATILE_AB, "ARM-Versatile AB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-versatile/versatile_pb.c b/arch/arm/mach-versatile/versatile_pb.c
index 37c23df..feaf9cb 100644
--- a/arch/arm/mach-versatile/versatile_pb.c
+++ b/arch/arm/mach-versatile/versatile_pb.c
@@ -103,7 +103,7 @@
MACHINE_START(VERSATILE_PB, "ARM-Versatile PB")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.map_io = versatile_map_io,
.init_early = versatile_init_early,
.init_irq = versatile_init_irq,
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index bfd32f5..2b1e836 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -221,6 +221,12 @@
{
int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU));
+ if (ncores > nr_cpu_ids) {
+ pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
+ ncores, nr_cpu_ids);
+ ncores = nr_cpu_ids;
+ }
+
for (i = 0; i < ncores; ++i)
set_cpu_possible(i, true);
diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/mach-vexpress/include/mach/debug-macro.S
index 050d65e..fd9e6c7 100644
--- a/arch/arm/mach-vexpress/include/mach/debug-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/debug-macro.S
@@ -12,7 +12,7 @@
#define DEBUG_LL_UART_OFFSET 0x00009000
- .macro addruart,rp,rv
+ .macro addruart,rp,rv,tmp
mov \rp, #DEBUG_LL_UART_OFFSET
orr \rv, \rp, #0xf8000000 @ virtual base
orr \rp, \rp, #0x10000000 @ physical base
diff --git a/arch/arm/mach-vexpress/include/mach/memory.h b/arch/arm/mach-vexpress/include/mach/memory.h
deleted file mode 100644
index 5b7fcd4..0000000
--- a/arch/arm/mach-vexpress/include/mach/memory.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * arch/arm/mach-vexpress/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x60000000)
-
-#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d0d267a..1fafc32 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -443,7 +443,7 @@
}
MACHINE_START(VEXPRESS, "ARM-Versatile Express")
- .boot_params = PLAT_PHYS_OFFSET + 0x00000100,
+ .atag_offset = 0x100,
.map_io = v2m_map_io,
.init_early = v2m_init_early,
.init_irq = v2m_init_irq,
diff --git a/arch/arm/mach-vt8500/bv07.c b/arch/arm/mach-vt8500/bv07.c
index 94a261d..a464c75 100644
--- a/arch/arm/mach-vt8500/bv07.c
+++ b/arch/arm/mach-vt8500/bv07.c
@@ -68,7 +68,7 @@
}
MACHINE_START(BV07, "Benign BV07 Mini Netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = vt8500_reserve_mem,
.map_io = vt8500_map_io,
.init_irq = vt8500_init_irq,
diff --git a/arch/arm/mach-vt8500/include/mach/debug-macro.S b/arch/arm/mach-vt8500/include/mach/debug-macro.S
index f119162..ca292f2 100644
--- a/arch/arm/mach-vt8500/include/mach/debug-macro.S
+++ b/arch/arm/mach-vt8500/include/mach/debug-macro.S
@@ -11,7 +11,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #0x00200000
orr \rv, \rp, #0xf8000000
orr \rp, \rp, #0xd8000000
diff --git a/arch/arm/mach-vt8500/include/mach/memory.h b/arch/arm/mach-vt8500/include/mach/memory.h
deleted file mode 100644
index 175f914..0000000
--- a/arch/arm/mach-vt8500/include/mach/memory.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * arch/arm/mach-vt8500/include/mach/memory.h
- *
- * Copyright (C) 2003 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-vt8500/wm8505_7in.c b/arch/arm/mach-vt8500/wm8505_7in.c
index e73aadb..cf910a9 100644
--- a/arch/arm/mach-vt8500/wm8505_7in.c
+++ b/arch/arm/mach-vt8500/wm8505_7in.c
@@ -68,7 +68,7 @@
}
MACHINE_START(WM8505_7IN_NETBOOK, "WM8505 7-inch generic netbook")
- .boot_params = 0x00000100,
+ .atag_offset = 0x100,
.reserve = wm8505_reserve_mem,
.map_io = wm8505_map_io,
.init_irq = wm8505_init_irq,
diff --git a/arch/arm/mach-w90x900/include/mach/memory.h b/arch/arm/mach-w90x900/include/mach/memory.h
deleted file mode 100644
index f02905b..0000000
--- a/arch/arm/mach-w90x900/include/mach/memory.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * arch/arm/mach-w90x900/include/mach/memory.h
- *
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * Based on arch/arm/mach-s3c2410/include/mach/memory.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif
diff --git a/arch/arm/mach-w90x900/mach-nuc910evb.c b/arch/arm/mach-w90x900/mach-nuc910evb.c
index 30fccde..31c1090 100644
--- a/arch/arm/mach-w90x900/mach-nuc910evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc910evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90P910EVB, "W90P910EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc910evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc910evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc950evb.c b/arch/arm/mach-w90x900/mach-nuc950evb.c
index 590c99b..4062e55 100644
--- a/arch/arm/mach-w90x900/mach-nuc950evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc950evb.c
@@ -37,7 +37,6 @@
MACHINE_START(W90P950EVB, "W90P950EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc950evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc950evb_init,
diff --git a/arch/arm/mach-w90x900/mach-nuc960evb.c b/arch/arm/mach-w90x900/mach-nuc960evb.c
index e09c645..0ab9995 100644
--- a/arch/arm/mach-w90x900/mach-nuc960evb.c
+++ b/arch/arm/mach-w90x900/mach-nuc960evb.c
@@ -34,7 +34,6 @@
MACHINE_START(W90N960EVB, "W90N960EVB")
/* Maintainer: Wan ZongShun */
- .boot_params = 0,
.map_io = nuc960evb_map_io,
.init_irq = nuc900_init_irq,
.init_machine = nuc960evb_init,
diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S
index 9f664d5..3ab0be1 100644
--- a/arch/arm/mach-zynq/include/mach/debug-macro.S
+++ b/arch/arm/mach-zynq/include/mach/debug-macro.S
@@ -17,7 +17,7 @@
#include <mach/zynq_soc.h>
#include <mach/uart.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =LL_UART_PADDR @ physical
ldr \rv, =LL_UART_VADDR @ virtual
.endm
diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h
deleted file mode 100644
index 35a9263..0000000
--- a/arch/arm/mach-zynq/include/mach/memory.h
+++ /dev/null
@@ -1,22 +0,0 @@
-/* arch/arm/mach-zynq/include/mach/memory.h
- *
- * Copyright (C) 2011 Xilinx
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#ifndef __MACH_MEMORY_H__
-#define __MACH_MEMORY_H__
-
-#include <asm/sizes.h>
-
-#define PLAT_PHYS_OFFSET UL(0x0)
-
-#endif
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c3ff82f..01f5987 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -18,12 +18,14 @@
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/highmem.h>
+#include <linux/slab.h>
#include <asm/memory.h>
#include <asm/highmem.h>
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
#include <asm/sizes.h>
+#include <asm/mach/arch.h>
#include "mm.h"
@@ -117,26 +119,37 @@
}
#ifdef CONFIG_MMU
-/* Sanity check size */
-#if (CONSISTENT_DMA_SIZE % SZ_2M)
-#error "CONSISTENT_DMA_SIZE must be multiple of 2MiB"
-#endif
-#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
-#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PGDIR_SHIFT)
-#define NUM_CONSISTENT_PTES (CONSISTENT_DMA_SIZE >> PGDIR_SHIFT)
+
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - consistent_base) >> PAGE_SHIFT)
+#define CONSISTENT_PTE_INDEX(x) (((unsigned long)(x) - consistent_base) >> PGDIR_SHIFT)
/*
* These are the page tables (2MB each) covering uncached, DMA consistent allocations
*/
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+static pte_t **consistent_pte;
+
+#define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
+
+unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+
+void __init init_consistent_dma_size(unsigned long size)
+{
+ unsigned long base = CONSISTENT_END - ALIGN(size, SZ_2M);
+
+ BUG_ON(consistent_pte); /* Check we're called before DMA region init */
+ BUG_ON(base < VMALLOC_END);
+
+ /* Grow region to accommodate specified size */
+ if (base < consistent_base)
+ consistent_base = base;
+}
#include "vmregion.h"
static struct arm_vmregion_head consistent_head = {
.vm_lock = __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
- .vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
@@ -155,7 +168,17 @@
pmd_t *pmd;
pte_t *pte;
int i = 0;
- u32 base = CONSISTENT_BASE;
+ unsigned long base = consistent_base;
+ unsigned long num_ptes = (CONSISTENT_END - base) >> PGDIR_SHIFT;
+
+ consistent_pte = kmalloc(num_ptes * sizeof(pte_t), GFP_KERNEL);
+ if (!consistent_pte) {
+ pr_err("%s: no memory\n", __func__);
+ return -ENOMEM;
+ }
+
+ pr_debug("DMA memory: 0x%08lx - 0x%08lx:\n", base, CONSISTENT_END);
+ consistent_head.vm_start = base;
do {
pgd = pgd_offset(&init_mm, base);
@@ -198,7 +221,7 @@
size_t align;
int bit;
- if (!consistent_pte[0]) {
+ if (!consistent_pte) {
printk(KERN_ERR "%s: not initialised\n", __func__);
dump_stack();
return NULL;
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index 3b5ea68..aa33949 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -20,6 +20,7 @@
#include <linux/highmem.h>
#include <linux/perf_event.h>
+#include <asm/exception.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index cc7e2d8..34409a0 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -653,9 +653,6 @@
" ITCM : 0x%08lx - 0x%08lx (%4ld kB)\n"
#endif
" fixmap : 0x%08lx - 0x%08lx (%4ld kB)\n"
-#ifdef CONFIG_MMU
- " DMA : 0x%08lx - 0x%08lx (%4ld MB)\n"
-#endif
" vmalloc : 0x%08lx - 0x%08lx (%4ld MB)\n"
" lowmem : 0x%08lx - 0x%08lx (%4ld MB)\n"
#ifdef CONFIG_HIGHMEM
@@ -674,9 +671,6 @@
MLK(ITCM_OFFSET, (unsigned long) itcm_end),
#endif
MLK(FIXADDR_START, FIXADDR_TOP),
-#ifdef CONFIG_MMU
- MLM(CONSISTENT_BASE, CONSISTENT_END),
-#endif
MLM(VMALLOC_START, VMALLOC_END),
MLM(PAGE_OFFSET, (unsigned long)high_memory),
#ifdef CONFIG_HIGHMEM
@@ -699,9 +693,6 @@
* be detected at build time already.
*/
#ifdef CONFIG_MMU
- BUILD_BUG_ON(VMALLOC_END > CONSISTENT_BASE);
- BUG_ON(VMALLOC_END > CONSISTENT_BASE);
-
BUILD_BUG_ON(TASK_SIZE > MODULES_VADDR);
BUG_ON(TASK_SIZE > MODULES_VADDR);
#endif
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index 594d677..ea9c9f3 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -273,6 +273,14 @@
.prot_l1 = PMD_TYPE_TABLE,
.domain = DOMAIN_KERNEL,
},
+ [MT_MEMORY_SO] = {
+ .prot_pte = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
+ L_PTE_MT_UNCACHED,
+ .prot_l1 = PMD_TYPE_TABLE,
+ .prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
+ PMD_SECT_UNCACHED | PMD_SECT_XN,
+ .domain = DOMAIN_KERNEL,
+ },
};
const struct mem_type *get_mem_type(unsigned int type)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2e6849b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,31 +379,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index cd8f79c..9f8fd91 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,31 +394,26 @@
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 4
+.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
- mov r2, r6, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 69e7f2e..7d91545 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@
mov pc, lr
.globl cpu_sa1100_suspend_size
-.equ cpu_sa1100_suspend_size, 4*4
+.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
- stmia r0, {r4 - r7} @ store cp regs
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r6} @ store cp regs
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
- ldmia r0, {r4 - r7} @ load cp regs
+ ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
@@ -189,13 +188,9 @@
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- mov r0, r7 @ control register
- mov r2, r5, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index a923aa0..d061d2f 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,18 @@
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
-.equ cpu_v6_suspend_size, 4 * 8
+.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
- mrc p15, 0, r11, c1, c0, 0 @ control register
- stmia r0, {r4 - r11}
- ldmfd sp!, {r4- r11, pc}
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mrc p15, 0, r8, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r9, c1, c0, 0 @ control register
+ stmia r0, {r4 - r9}
+ ldmfd sp!, {r4- r9, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
@@ -150,25 +148,21 @@
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
- ldmia r0, {r4 - r11}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0, {r4 - r9}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r6, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r7, c1, c0, 1 @ auxiliary control register
+ mcr p15, 0, r8, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
- mov r0, r11 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
string cpu_v6_name, "ARMv6-compatible processor"
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 9049c0764..6af366c 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,56 +217,50 @@
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 9
+.equ cpu_v7_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mrc p15, 0, r5, c13, c0, 1 @ Context ID
- mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- stmia r0!, {r4 - r6}
+ mrc p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ stmia r0!, {r4 - r5}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ TTB 0
- mrc p15, 0, r8, c2, c0, 1 @ TTB 1
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
- ldmfd sp!, {r4 - r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r8, c1, c0, 0 @ Control register
+ mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r6 - r10}
+ ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate TLBs
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
- ldmia r0!, {r4 - r6}
+ mcr p15, 0, ip, c13, c0, 1 @ set reserved context ID
+ ldmia r0!, {r4 - r5}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
- mcr p15, 0, r5, c13, c0, 1 @ Context ID
- mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ mcr p15, 0, r5, c13, c0, 3 @ User r/o thread ID
+ ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ TTB 0
- mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
- teq r4, r10 @ Is it already set?
- mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ teq r4, r9 @ Is it already set?
+ mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
+ mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
- mov r0, r9 @ control register
- mov r2, r7, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, cpu_resume_l1_flags
+ mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
-cpu_resume_l1_flags:
- ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP)
- ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP)
#endif
__CPUINIT
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 755e1bf..abf0507 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 7
+.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmia sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
@@ -433,15 +432,10 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
-
- @ temporarily map resume_turn_on_mmu into the page table,
- @ otherwise prefetch abort occurs after MMU is turned on
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =0x542e @ section flags
+ orr r1, r1, #0x18 @ cache the page table in L2
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index fbc06e5..3277904 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@
.align
.globl cpu_xscale_suspend_size
-.equ cpu_xscale_suspend_size, 4 * 7
+.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmfd sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -545,13 +544,9 @@
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mov r0, r10 @ control register
- mov r2, r8, lsr #14 @ get TTB0 base
- mov r2, r2, lsl #14
- ldr r3, =PMD_TYPE_SECT | PMD_SECT_BUFFERABLE | \
- PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index e4dde91..a304593 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -54,7 +54,7 @@
#define UART_VADDR IMX_IO_ADDRESS(UART_PADDR)
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
ldr \rp, =UART_PADDR @ physical
ldr \rv, =UART_VADDR @ virtual
.endm
diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h
deleted file mode 100644
index 11be5cd..0000000
--- a/arch/arm/plat-mxc/include/mach/memory.h
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_MEMORY_H__
-#define __ASM_ARCH_MXC_MEMORY_H__
-
-#define MX1_PHYS_OFFSET UL(0x08000000)
-#define MX21_PHYS_OFFSET UL(0xc0000000)
-#define MX25_PHYS_OFFSET UL(0x80000000)
-#define MX27_PHYS_OFFSET UL(0xa0000000)
-#define MX3x_PHYS_OFFSET UL(0x80000000)
-#define MX50_PHYS_OFFSET UL(0x70000000)
-#define MX51_PHYS_OFFSET UL(0x90000000)
-#define MX53_PHYS_OFFSET UL(0x70000000)
-
-#if !defined(CONFIG_RUNTIME_PHYS_OFFSET)
-# if defined CONFIG_ARCH_MX1
-# define PLAT_PHYS_OFFSET MX1_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX21
-# define PLAT_PHYS_OFFSET MX21_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX25
-# define PLAT_PHYS_OFFSET MX25_PHYS_OFFSET
-# elif defined CONFIG_MACH_MX27
-# define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX3
-# define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX50
-# define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX51
-# define PLAT_PHYS_OFFSET MX51_PHYS_OFFSET
-# elif defined CONFIG_ARCH_MX53
-# define PLAT_PHYS_OFFSET MX53_PHYS_OFFSET
-# endif
-#endif
-
-#if defined(CONFIG_MX3_VIDEO)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for mx3 camera driver to capture at least two QXGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_8M
-
-#elif defined(CONFIG_MX1_VIDEO) || defined(CONFIG_VIDEO_MX2_HOSTSUPPORT)
-/*
- * Increase size of DMA-consistent memory region.
- * This is required for i.MX camera driver to capture at least four VGA frames.
- */
-#define CONSISTENT_DMA_SIZE SZ_4M
-#endif /* CONFIG_MX1_VIDEO || CONFIG_VIDEO_MX2_HOSTSUPPORT */
-
-#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index bb8f4a6..95732af 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,6 +14,7 @@
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
+ select NEED_MACH_MEMORY_H
help
"Systems based on omap7xx, omap15xx or omap16xx"
diff --git a/arch/arm/plat-omap/include/plat/io.h b/arch/arm/plat-omap/include/plat/io.h
index d72ec85..ebe67ea 100644
--- a/arch/arm/plat-omap/include/plat/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -309,6 +309,8 @@
void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
void omap_iounmap(volatile void __iomem *addr);
+extern void __init omap_init_consistent_dma_size(void);
+
#endif
#endif
diff --git a/arch/arm/plat-omap/include/plat/memory.h b/arch/arm/plat-omap/include/plat/memory.h
deleted file mode 100644
index e6720aa..0000000
--- a/arch/arm/plat-omap/include/plat/memory.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/memory.h
- *
- * Memory map for OMAP-1510 and 1610
- *
- * Copyright (C) 2000 RidgeRun, Inc.
- * Author: Greg Lonnon <glonnon@ridgerun.com>
- *
- * This file was derived from arch/arm/mach-intergrator/include/mach/memory.h
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#if defined(CONFIG_ARCH_OMAP1)
-#define PLAT_PHYS_OFFSET UL(0x10000000)
-#else
-#define PLAT_PHYS_OFFSET UL(0x80000000)
-#endif
-
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- * Note that the is_lbus_device() test is not very efficient on 1510
- * because of the strncmp().
- */
-#ifdef CONFIG_ARCH_OMAP15XX
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET UL(0x30000000)
-
-#define virt_to_lbus(x) ((x) - PAGE_OFFSET + OMAP1510_LB_OFFSET)
-#define lbus_to_virt(x) ((x) - OMAP1510_LB_OFFSET + PAGE_OFFSET)
-#define is_lbus_device(dev) (cpu_is_omap15xx() && dev && (strncmp(dev_name(dev), "ohci", 4) == 0))
-
-#define __arch_pfn_to_dma(dev, pfn) \
- ({ dma_addr_t __dma = __pfn_to_phys(pfn); \
- if (is_lbus_device(dev)) \
- __dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
- __dma; })
-
-#define __arch_dma_to_pfn(dev, addr) \
- ({ dma_addr_t __dma = addr; \
- if (is_lbus_device(dev)) \
- __dma += PHYS_OFFSET - OMAP1510_LB_OFFSET; \
- __phys_to_pfn(__dma); \
- })
-
-#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \
- lbus_to_virt(addr) : \
- __phys_to_virt(addr)); })
-
-#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \
- (dma_addr_t) (is_lbus_device(dev) ? \
- virt_to_lbus(__addr) : \
- __virt_to_phys(__addr)); })
-
-#endif /* CONFIG_ARCH_OMAP15XX */
-
-/* Override the ARM default */
-#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-
-#if (CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE == 0)
-#undef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
-#define CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE 2
-#endif
-
-#define CONSISTENT_DMA_SIZE \
- (((CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE + 1) & ~1) * 1024 * 1024)
-
-#endif
-
-#endif
-
diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index de3b10c..1ab9fd6 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -16,8 +16,8 @@
#include <linux/init.h>
/*
- * Memory entry used for the DEBUG_LL UART configuration. See also
- * uncompress.h and debug-macro.S.
+ * Memory entry used for the DEBUG_LL UART configuration, relative to
+ * start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
@@ -27,7 +27,7 @@
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
-#define OMAP_UART_INFO (PLAT_PHYS_OFFSET + 0x3ffc)
+#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index a067484..2f472e9 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -36,7 +36,13 @@
*/
static void set_omap_uart_info(unsigned char port)
{
- *(volatile u32 *)OMAP_UART_INFO = port;
+ /*
+ * Get address of some.bss variable and round it down
+ * a la CONFIG_AUTO_ZRELADDR.
+ */
+ u32 ram_start = (u32)&uart_shift & 0xf8000000;
+ u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
+ *uart_info = port;
}
static void putc(int c)
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index f1ecfa9..e9b0e23 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -12,6 +12,7 @@
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
+#include <linux/dma-mapping.h>
#include <plat/omap7xx.h>
#include <plat/omap1510.h>
@@ -139,3 +140,10 @@
__iounmap(addr);
}
EXPORT_SYMBOL(omap_iounmap);
+
+void __init omap_init_consistent_dma_size(void)
+{
+#ifdef CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE
+ init_consistent_dma_size(CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE << 20);
+#endif
+}
diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S
index 8501bbf..02b160a 100644
--- a/arch/arm/plat-spear/include/plat/debug-macro.S
+++ b/arch/arm/plat-spear/include/plat/debug-macro.S
@@ -14,7 +14,7 @@
#include <linux/amba/serial.h>
#include <mach/hardware.h>
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
mov \rp, #SPEAR_DBG_UART_BASE @ Physical base
mov \rv, #VA_SPEAR_DBG_UART_BASE @ Virtual base
.endm
diff --git a/arch/arm/plat-spear/include/plat/memory.h b/arch/arm/plat-spear/include/plat/memory.h
deleted file mode 100644
index 7e3599e..0000000
--- a/arch/arm/plat-spear/include/plat/memory.h
+++ /dev/null
@@ -1,20 +0,0 @@
-/*
- * arch/arm/plat-spear/include/plat/memory.h
- *
- * Memory map for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_MEMORY_H
-#define __PLAT_MEMORY_H
-
-/* Physical DRAM offset */
-#define PLAT_PHYS_OFFSET UL(0x00000000)
-
-#endif /* __PLAT_MEMORY_H */
diff --git a/arch/arm/plat-tcc/include/mach/debug-macro.S b/arch/arm/plat-tcc/include/mach/debug-macro.S
index 7662f73..cf17d04 100644
--- a/arch/arm/plat-tcc/include/mach/debug-macro.S
+++ b/arch/arm/plat-tcc/include/mach/debug-macro.S
@@ -9,7 +9,7 @@
*
*/
- .macro addruart, rp, rv
+ .macro addruart, rp, rv, tmp
moveq \rp, #0x90000000 @ physical base address
movne \rv, #0xF1000000 @ virtual base
orr \rp, \rp, #0x00007000 @ UART0
diff --git a/arch/arm/plat-tcc/include/mach/memory.h b/arch/arm/plat-tcc/include/mach/memory.h
deleted file mode 100644
index 28a6e0c..0000000
--- a/arch/arm/plat-tcc/include/mach/memory.h
+++ /dev/null
@@ -1,18 +0,0 @@
-/*
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 RidgeRun, Inc.
- * Copyright (C) 2008-2009 Telechips
- * Copyright (C) 2010 Hans J. Koch <hjk@linutronix.de>
- *
- * Licensed under the terms of the GPL v2.
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-/*
- * Physical DRAM offset.
- */
-#define PLAT_PHYS_OFFSET UL(0x20000000)
-
-#endif
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 79bcb43..0cbd5a0 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/types.h>
#include <linux/cpu.h>
+#include <linux/cpu_pm.h>
#include <linux/kernel.h>
#include <linux/notifier.h>
#include <linux/signal.h>
@@ -68,7 +69,7 @@
/*
* Force a reload of the VFP context from the thread structure. We do
* this by ensuring that access to the VFP hardware is disabled, and
- * clear last_VFP_context. Must be called from non-preemptible context.
+ * clear vfp_current_hw_state. Must be called from non-preemptible context.
*/
static void vfp_force_reload(unsigned int cpu, struct thread_info *thread)
{
@@ -436,9 +437,7 @@
set_copro_access(access | CPACC_FULL(10) | CPACC_FULL(11));
}
-#ifdef CONFIG_PM
-#include <linux/syscore_ops.h>
-
+#ifdef CONFIG_CPU_PM
static int vfp_pm_suspend(void)
{
struct thread_info *ti = current_thread_info();
@@ -468,19 +467,33 @@
fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
}
-static struct syscore_ops vfp_pm_syscore_ops = {
- .suspend = vfp_pm_suspend,
- .resume = vfp_pm_resume,
+static int vfp_cpu_pm_notifier(struct notifier_block *self, unsigned long cmd,
+ void *v)
+{
+ switch (cmd) {
+ case CPU_PM_ENTER:
+ vfp_pm_suspend();
+ break;
+ case CPU_PM_ENTER_FAILED:
+ case CPU_PM_EXIT:
+ vfp_pm_resume();
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block vfp_cpu_pm_notifier_block = {
+ .notifier_call = vfp_cpu_pm_notifier,
};
static void vfp_pm_init(void)
{
- register_syscore_ops(&vfp_pm_syscore_ops);
+ cpu_pm_register_notifier(&vfp_cpu_pm_notifier_block);
}
#else
static inline void vfp_pm_init(void) { }
-#endif /* CONFIG_PM */
+#endif /* CONFIG_CPU_PM */
/*
* Ensure that the VFP state stored in 'thread->vfpstate' is up to date
diff --git a/drivers/usb/musb/musb_debugfs.c b/drivers/usb/musb/musb_debugfs.c
index b0176e4..61f4ee4 100644
--- a/drivers/usb/musb/musb_debugfs.c
+++ b/drivers/usb/musb/musb_debugfs.c
@@ -41,12 +41,6 @@
#include <linux/debugfs.h>
#include <linux/seq_file.h>
-#ifdef CONFIG_ARM
-#include <mach/hardware.h>
-#include <mach/memory.h>
-#include <asm/mach-types.h>
-#endif
-
#include <asm/uaccess.h>
#include "musb_core.h"
diff --git a/include/linux/cpu_pm.h b/include/linux/cpu_pm.h
new file mode 100644
index 0000000..455b233
--- /dev/null
+++ b/include/linux/cpu_pm.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _LINUX_CPU_PM_H
+#define _LINUX_CPU_PM_H
+
+#include <linux/kernel.h>
+#include <linux/notifier.h>
+
+/*
+ * When a CPU goes to a low power state that turns off power to the CPU's
+ * power domain, the contents of some blocks (floating point coprocessors,
+ * interrupt controllers, caches, timers) in the same power domain can
+ * be lost. The cpm_pm notifiers provide a method for platform idle, suspend,
+ * and hotplug implementations to notify the drivers for these blocks that
+ * they may be reset.
+ *
+ * All cpu_pm notifications must be called with interrupts disabled.
+ *
+ * The notifications are split into two classes: CPU notifications and CPU
+ * cluster notifications.
+ *
+ * CPU notifications apply to a single CPU and must be called on the affected
+ * CPU. They are used to save per-cpu context for affected blocks.
+ *
+ * CPU cluster notifications apply to all CPUs in a single power domain. They
+ * are used to save any global context for affected blocks, and must be called
+ * after all the CPUs in the power domain have been notified of the low power
+ * state.
+ */
+
+/*
+ * Event codes passed as unsigned long val to notifier calls
+ */
+enum cpu_pm_event {
+ /* A single cpu is entering a low power state */
+ CPU_PM_ENTER,
+
+ /* A single cpu failed to enter a low power state */
+ CPU_PM_ENTER_FAILED,
+
+ /* A single cpu is exiting a low power state */
+ CPU_PM_EXIT,
+
+ /* A cpu power domain is entering a low power state */
+ CPU_CLUSTER_PM_ENTER,
+
+ /* A cpu power domain failed to enter a low power state */
+ CPU_CLUSTER_PM_ENTER_FAILED,
+
+ /* A cpu power domain is exiting a low power state */
+ CPU_CLUSTER_PM_EXIT,
+};
+
+#ifdef CONFIG_CPU_PM
+int cpu_pm_register_notifier(struct notifier_block *nb);
+int cpu_pm_unregister_notifier(struct notifier_block *nb);
+int cpu_pm_enter(void);
+int cpu_pm_exit(void);
+int cpu_cluster_pm_enter(void);
+int cpu_cluster_pm_exit(void);
+
+#else
+
+static inline int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ return 0;
+}
+
+static inline int cpu_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_pm_exit(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_enter(void)
+{
+ return 0;
+}
+
+static inline int cpu_cluster_pm_exit(void)
+{
+ return 0;
+}
+#endif
+#endif
diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h
index a103732..664544f 100644
--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -95,6 +95,7 @@
* @flags: flags (see IRQF_* above)
* @name: name of the device
* @dev_id: cookie to identify the device
+ * @percpu_dev_id: cookie to identify the device
* @next: pointer to the next irqaction for shared interrupts
* @irq: interrupt number
* @dir: pointer to the proc/irq/NN/name entry
@@ -104,17 +105,18 @@
* @thread_mask: bitmask for keeping track of @thread activity
*/
struct irqaction {
- irq_handler_t handler;
- unsigned long flags;
- void *dev_id;
- struct irqaction *next;
- int irq;
- irq_handler_t thread_fn;
- struct task_struct *thread;
- unsigned long thread_flags;
- unsigned long thread_mask;
- const char *name;
- struct proc_dir_entry *dir;
+ irq_handler_t handler;
+ unsigned long flags;
+ void *dev_id;
+ void __percpu *percpu_dev_id;
+ struct irqaction *next;
+ int irq;
+ irq_handler_t thread_fn;
+ struct task_struct *thread;
+ unsigned long thread_flags;
+ unsigned long thread_mask;
+ const char *name;
+ struct proc_dir_entry *dir;
} ____cacheline_internodealigned_in_smp;
extern irqreturn_t no_action(int cpl, void *dev_id);
@@ -136,6 +138,10 @@
request_any_context_irq(unsigned int irq, irq_handler_t handler,
unsigned long flags, const char *name, void *dev_id);
+extern int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id);
+
extern void exit_irq_thread(void);
#else
@@ -164,10 +170,18 @@
return request_irq(irq, handler, flags, name, dev_id);
}
+static inline int __must_check
+request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *percpu_dev_id)
+{
+ return request_irq(irq, handler, 0, devname, percpu_dev_id);
+}
+
static inline void exit_irq_thread(void) { }
#endif
extern void free_irq(unsigned int, void *);
+extern void free_percpu_irq(unsigned int, void __percpu *);
struct device;
@@ -207,7 +221,9 @@
extern void disable_irq_nosync(unsigned int irq);
extern void disable_irq(unsigned int irq);
+extern void disable_percpu_irq(unsigned int irq);
extern void enable_irq(unsigned int irq);
+extern void enable_percpu_irq(unsigned int irq, unsigned int type);
/* The following three functions are for the core kernel use only. */
#ifdef CONFIG_GENERIC_HARDIRQS
diff --git a/include/linux/irq.h b/include/linux/irq.h
index 5951730..59e49c8 100644
--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -66,6 +66,7 @@
* IRQ_NO_BALANCING - Interrupt cannot be balanced (affinity set)
* IRQ_MOVE_PCNTXT - Interrupt can be migrated from process context
* IRQ_NESTED_TRHEAD - Interrupt nests into another thread
+ * IRQ_PER_CPU_DEVID - Dev_id is a per-cpu variable
*/
enum {
IRQ_TYPE_NONE = 0x00000000,
@@ -88,12 +89,13 @@
IRQ_MOVE_PCNTXT = (1 << 14),
IRQ_NESTED_THREAD = (1 << 15),
IRQ_NOTHREAD = (1 << 16),
+ IRQ_PER_CPU_DEVID = (1 << 17),
};
#define IRQF_MODIFY_MASK \
(IRQ_TYPE_SENSE_MASK | IRQ_NOPROBE | IRQ_NOREQUEST | \
IRQ_NOAUTOEN | IRQ_MOVE_PCNTXT | IRQ_LEVEL | IRQ_NO_BALANCING | \
- IRQ_PER_CPU | IRQ_NESTED_THREAD)
+ IRQ_PER_CPU | IRQ_NESTED_THREAD | IRQ_NOTHREAD | IRQ_PER_CPU_DEVID)
#define IRQ_NO_BALANCING_MASK (IRQ_PER_CPU | IRQ_NO_BALANCING)
@@ -336,12 +338,14 @@
* IRQCHIP_MASK_ON_SUSPEND: Mask non wake irqs in the suspend path
* IRQCHIP_ONOFFLINE_ENABLED: Only call irq_on/off_line callbacks
* when irq enabled
+ * IRQCHIP_SKIP_SET_WAKE: Skip chip.irq_set_wake(), for this irq chip
*/
enum {
IRQCHIP_SET_TYPE_MASKED = (1 << 0),
IRQCHIP_EOI_IF_HANDLED = (1 << 1),
IRQCHIP_MASK_ON_SUSPEND = (1 << 2),
IRQCHIP_ONOFFLINE_ENABLED = (1 << 3),
+ IRQCHIP_SKIP_SET_WAKE = (1 << 4),
};
/* This include will go away once we isolated irq_desc usage to core code */
@@ -365,6 +369,8 @@
struct irqaction;
extern int setup_irq(unsigned int irq, struct irqaction *new);
extern void remove_irq(unsigned int irq, struct irqaction *act);
+extern int setup_percpu_irq(unsigned int irq, struct irqaction *new);
+extern void remove_percpu_irq(unsigned int irq, struct irqaction *act);
extern void irq_cpu_online(void);
extern void irq_cpu_offline(void);
@@ -392,6 +398,7 @@
extern void handle_edge_eoi_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_simple_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_percpu_irq(unsigned int irq, struct irq_desc *desc);
+extern void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_bad_irq(unsigned int irq, struct irq_desc *desc);
extern void handle_nested_irq(unsigned int irq);
@@ -420,6 +427,8 @@
irq_set_chip_and_handler_name(irq, chip, handle, NULL);
}
+extern int irq_set_percpu_devid(unsigned int irq);
+
extern void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name);
@@ -481,6 +490,13 @@
irq_clear_status_flags(irq, IRQ_NESTED_THREAD);
}
+static inline void irq_set_percpu_devid_flags(unsigned int irq)
+{
+ irq_set_status_flags(irq,
+ IRQ_NOAUTOEN | IRQ_PER_CPU | IRQ_NOTHREAD |
+ IRQ_NOPROBE | IRQ_PER_CPU_DEVID);
+}
+
/* Handle dynamic irq creation and destruction */
extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
diff --git a/include/linux/irqdesc.h b/include/linux/irqdesc.h
index 150134a..6b69c2c 100644
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -53,6 +53,7 @@
unsigned long last_unhandled; /* Aging timer for unhandled count */
unsigned int irqs_unhandled;
raw_spinlock_t lock;
+ struct cpumask *percpu_enabled;
#ifdef CONFIG_SMP
const struct cpumask *affinity_hint;
struct irq_affinity_notify *affinity_notify;
diff --git a/kernel/Makefile b/kernel/Makefile
index eca595e..988cb3d 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -101,6 +101,7 @@
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_SMP) += sched_cpupri.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
+obj-$(CONFIG_CPU_PM) += cpu_pm.o
obj-$(CONFIG_PERF_EVENTS) += events/
diff --git a/kernel/cpu_pm.c b/kernel/cpu_pm.c
new file mode 100644
index 0000000..249152e
--- /dev/null
+++ b/kernel/cpu_pm.c
@@ -0,0 +1,233 @@
+/*
+ * Copyright (C) 2011 Google, Inc.
+ *
+ * Author:
+ * Colin Cross <ccross@android.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/cpu_pm.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/spinlock.h>
+#include <linux/syscore_ops.h>
+
+static DEFINE_RWLOCK(cpu_pm_notifier_lock);
+static RAW_NOTIFIER_HEAD(cpu_pm_notifier_chain);
+
+static int cpu_pm_notify(enum cpu_pm_event event, int nr_to_call, int *nr_calls)
+{
+ int ret;
+
+ ret = __raw_notifier_call_chain(&cpu_pm_notifier_chain, event, NULL,
+ nr_to_call, nr_calls);
+
+ return notifier_to_errno(ret);
+}
+
+/**
+ * cpu_pm_register_notifier - register a driver with cpu_pm
+ * @nb: notifier block to register
+ *
+ * Add a driver to a list of drivers that are notified about
+ * CPU and CPU cluster low power entry and exit.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_register.
+ */
+int cpu_pm_register_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_register(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_register_notifier);
+
+/**
+ * cpu_pm_unregister_notifier - unregister a driver with cpu_pm
+ * @nb: notifier block to be unregistered
+ *
+ * Remove a driver from the CPU PM notifier list.
+ *
+ * This function may sleep, and has the same return conditions as
+ * raw_notifier_chain_unregister.
+ */
+int cpu_pm_unregister_notifier(struct notifier_block *nb)
+{
+ unsigned long flags;
+ int ret;
+
+ write_lock_irqsave(&cpu_pm_notifier_lock, flags);
+ ret = raw_notifier_chain_unregister(&cpu_pm_notifier_chain, nb);
+ write_unlock_irqrestore(&cpu_pm_notifier_lock, flags);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_unregister_notifier);
+
+/**
+ * cpm_pm_enter - CPU low power entry notifier
+ *
+ * Notifies listeners that a single CPU is entering a low power state that may
+ * cause some blocks in the same power domain as the cpu to reset.
+ *
+ * Must be called on the affected CPU with interrupts disabled. Platform is
+ * responsible for ensuring that cpu_pm_enter is not called twice on the same
+ * CPU before cpu_pm_exit is called. Notified drivers can include VFP
+ * co-processor, interrupt controller and it's PM extensions, local CPU
+ * timers context save/restore which shouldn't be interrupted. Hence it
+ * must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU PM
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_enter);
+
+/**
+ * cpm_pm_exit - CPU low power exit notifier
+ *
+ * Notifies listeners that a single CPU is exiting a low power state that may
+ * have caused some blocks in the same power domain as the cpu to reset.
+ *
+ * Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_pm_exit);
+
+/**
+ * cpm_cluster_pm_enter - CPU cluster low power entry notifier
+ *
+ * Notifies listeners that all cpus in a power domain are entering a low power
+ * state that may cause some blocks in the same power domain to reset.
+ *
+ * Must be called after cpu_pm_enter has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_enter(void)
+{
+ int nr_calls;
+ int ret = 0;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_ENTER, -1, &nr_calls);
+ if (ret)
+ /*
+ * Inform listeners (nr_calls - 1) about failure of CPU cluster
+ * PM entry who are notified earlier to prepare for it.
+ */
+ cpu_pm_notify(CPU_CLUSTER_PM_ENTER_FAILED, nr_calls - 1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_enter);
+
+/**
+ * cpm_cluster_pm_exit - CPU cluster low power exit notifier
+ *
+ * Notifies listeners that all cpus in a power domain are exiting form a
+ * low power state that may have caused some blocks in the same power domain
+ * to reset.
+ *
+ * Must be called after cpu_pm_exit has been called on all cpus in the power
+ * domain, and before cpu_pm_exit has been called on any cpu in the power
+ * domain. Notified drivers can include VFP co-processor, interrupt controller
+ * and it's PM extensions, local CPU timers context save/restore which
+ * shouldn't be interrupted. Hence it must be called with interrupts disabled.
+ *
+ * Return conditions are same as __raw_notifier_call_chain.
+ */
+int cpu_cluster_pm_exit(void)
+{
+ int ret;
+
+ read_lock(&cpu_pm_notifier_lock);
+ ret = cpu_pm_notify(CPU_CLUSTER_PM_EXIT, -1, NULL);
+ read_unlock(&cpu_pm_notifier_lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cpu_cluster_pm_exit);
+
+#ifdef CONFIG_PM
+static int cpu_pm_suspend(void)
+{
+ int ret;
+
+ ret = cpu_pm_enter();
+ if (ret)
+ return ret;
+
+ ret = cpu_cluster_pm_enter();
+ return ret;
+}
+
+static void cpu_pm_resume(void)
+{
+ cpu_cluster_pm_exit();
+ cpu_pm_exit();
+}
+
+static struct syscore_ops cpu_pm_syscore_ops = {
+ .suspend = cpu_pm_suspend,
+ .resume = cpu_pm_resume,
+};
+
+static int cpu_pm_init(void)
+{
+ register_syscore_ops(&cpu_pm_syscore_ops);
+ return 0;
+}
+core_initcall(cpu_pm_init);
+#endif
diff --git a/kernel/events/core.c b/kernel/events/core.c
index 0f85778..fbe38f2 100644
--- a/kernel/events/core.c
+++ b/kernel/events/core.c
@@ -5758,6 +5758,7 @@
pmu = idr_find(&pmu_idr, event->attr.type);
rcu_read_unlock();
if (pmu) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (ret)
pmu = ERR_PTR(ret);
@@ -5765,6 +5766,7 @@
}
list_for_each_entry_rcu(pmu, &pmus, entry) {
+ event->pmu = pmu;
ret = pmu->event_init(event);
if (!ret)
goto unlock;
@@ -5891,8 +5893,6 @@
return ERR_PTR(err);
}
- event->pmu = pmu;
-
if (!event->parent) {
if (event->attach_state & PERF_ATTACH_TASK)
jump_label_inc(&perf_sched_events);
diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c
index dc5114b..f7c543a 100644
--- a/kernel/irq/chip.c
+++ b/kernel/irq/chip.c
@@ -26,7 +26,7 @@
int irq_set_chip(unsigned int irq, struct irq_chip *chip)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -54,7 +54,7 @@
int irq_set_irq_type(unsigned int irq, unsigned int type)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
@@ -78,7 +78,7 @@
int irq_set_handler_data(unsigned int irq, void *data)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -98,7 +98,7 @@
int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -119,7 +119,7 @@
int irq_set_chip_data(unsigned int irq, void *data)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return -EINVAL;
@@ -204,6 +204,24 @@
}
}
+void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_enable)
+ desc->irq_data.chip->irq_enable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_unmask(&desc->irq_data);
+ cpumask_set_cpu(cpu, desc->percpu_enabled);
+}
+
+void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu)
+{
+ if (desc->irq_data.chip->irq_disable)
+ desc->irq_data.chip->irq_disable(&desc->irq_data);
+ else
+ desc->irq_data.chip->irq_mask(&desc->irq_data);
+ cpumask_clear_cpu(cpu, desc->percpu_enabled);
+}
+
static inline void mask_ack_irq(struct irq_desc *desc)
{
if (desc->irq_data.chip->irq_mask_ack)
@@ -544,12 +562,44 @@
chip->irq_eoi(&desc->irq_data);
}
+/**
+ * handle_percpu_devid_irq - Per CPU local irq handler with per cpu dev ids
+ * @irq: the interrupt number
+ * @desc: the interrupt description structure for this irq
+ *
+ * Per CPU interrupts on SMP machines without locking requirements. Same as
+ * handle_percpu_irq() above but with the following extras:
+ *
+ * action->percpu_dev_id is a pointer to percpu variables which
+ * contain the real device id for the cpu on which this handler is
+ * called
+ */
+void handle_percpu_devid_irq(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irqaction *action = desc->action;
+ void *dev_id = __this_cpu_ptr(action->percpu_dev_id);
+ irqreturn_t res;
+
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ trace_irq_handler_entry(irq, action);
+ res = action->handler(irq, dev_id);
+ trace_irq_handler_exit(irq, action, res);
+
+ if (chip->irq_eoi)
+ chip->irq_eoi(&desc->irq_data);
+}
+
void
__irq_set_handler(unsigned int irq, irq_flow_handler_t handle, int is_chained,
const char *name)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, 0);
if (!desc)
return;
@@ -593,7 +643,7 @@
void irq_modify_status(unsigned int irq, unsigned long clr, unsigned long set)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
if (!desc)
return;
diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h
index 6546431..a73dd6c 100644
--- a/kernel/irq/internals.h
+++ b/kernel/irq/internals.h
@@ -71,6 +71,8 @@
extern void irq_shutdown(struct irq_desc *desc);
extern void irq_enable(struct irq_desc *desc);
extern void irq_disable(struct irq_desc *desc);
+extern void irq_percpu_enable(struct irq_desc *desc, unsigned int cpu);
+extern void irq_percpu_disable(struct irq_desc *desc, unsigned int cpu);
extern void mask_irq(struct irq_desc *desc);
extern void unmask_irq(struct irq_desc *desc);
@@ -114,14 +116,21 @@
desc->irq_data.chip->irq_bus_sync_unlock(&desc->irq_data);
}
+#define _IRQ_DESC_CHECK (1 << 0)
+#define _IRQ_DESC_PERCPU (1 << 1)
+
+#define IRQ_GET_DESC_CHECK_GLOBAL (_IRQ_DESC_CHECK)
+#define IRQ_GET_DESC_CHECK_PERCPU (_IRQ_DESC_CHECK | _IRQ_DESC_PERCPU)
+
struct irq_desc *
-__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus);
+__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
+ unsigned int check);
void __irq_put_desc_unlock(struct irq_desc *desc, unsigned long flags, bool bus);
static inline struct irq_desc *
-irq_get_desc_buslock(unsigned int irq, unsigned long *flags)
+irq_get_desc_buslock(unsigned int irq, unsigned long *flags, unsigned int check)
{
- return __irq_get_desc_lock(irq, flags, true);
+ return __irq_get_desc_lock(irq, flags, true, check);
}
static inline void
@@ -131,9 +140,9 @@
}
static inline struct irq_desc *
-irq_get_desc_lock(unsigned int irq, unsigned long *flags)
+irq_get_desc_lock(unsigned int irq, unsigned long *flags, unsigned int check)
{
- return __irq_get_desc_lock(irq, flags, false);
+ return __irq_get_desc_lock(irq, flags, false, check);
}
static inline void
diff --git a/kernel/irq/irqdesc.c b/kernel/irq/irqdesc.c
index 039b889..1550e84 100644
--- a/kernel/irq/irqdesc.c
+++ b/kernel/irq/irqdesc.c
@@ -424,11 +424,22 @@
}
struct irq_desc *
-__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus)
+__irq_get_desc_lock(unsigned int irq, unsigned long *flags, bool bus,
+ unsigned int check)
{
struct irq_desc *desc = irq_to_desc(irq);
if (desc) {
+ if (check & _IRQ_DESC_CHECK) {
+ if ((check & _IRQ_DESC_PERCPU) &&
+ !irq_settings_is_per_cpu_devid(desc))
+ return NULL;
+
+ if (!(check & _IRQ_DESC_PERCPU) &&
+ irq_settings_is_per_cpu_devid(desc))
+ return NULL;
+ }
+
if (bus)
chip_bus_lock(desc);
raw_spin_lock_irqsave(&desc->lock, *flags);
@@ -443,6 +454,25 @@
chip_bus_sync_unlock(desc);
}
+int irq_set_percpu_devid(unsigned int irq)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc)
+ return -EINVAL;
+
+ if (desc->percpu_enabled)
+ return -EINVAL;
+
+ desc->percpu_enabled = kzalloc(sizeof(*desc->percpu_enabled), GFP_KERNEL);
+
+ if (!desc->percpu_enabled)
+ return -ENOMEM;
+
+ irq_set_percpu_devid_flags(irq);
+ return 0;
+}
+
/**
* dynamic_irq_cleanup - cleanup a dynamically allocated irq
* @irq: irq number to initialize
diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c
index 9b956fa..67ce837 100644
--- a/kernel/irq/manage.c
+++ b/kernel/irq/manage.c
@@ -195,7 +195,7 @@
int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -356,7 +356,7 @@
static int __disable_irq_nosync(unsigned int irq)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return -EINVAL;
@@ -448,7 +448,7 @@
void enable_irq(unsigned int irq)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
if (!desc)
return;
@@ -467,6 +467,9 @@
struct irq_desc *desc = irq_to_desc(irq);
int ret = -ENXIO;
+ if (irq_desc_get_chip(desc)->flags & IRQCHIP_SKIP_SET_WAKE)
+ return 0;
+
if (desc->irq_data.chip->irq_set_wake)
ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
@@ -488,7 +491,7 @@
int irq_set_irq_wake(unsigned int irq, unsigned int on)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_buslock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
int ret = 0;
if (!desc)
@@ -529,7 +532,7 @@
int can_request_irq(unsigned int irq, unsigned long irqflags)
{
unsigned long flags;
- struct irq_desc *desc = irq_get_desc_lock(irq, &flags);
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
int canrequest = 0;
if (!desc)
@@ -1118,6 +1121,8 @@
int retval;
struct irq_desc *desc = irq_to_desc(irq);
+ if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ return -EINVAL;
chip_bus_lock(desc);
retval = __setup_irq(irq, desc, act);
chip_bus_sync_unlock(desc);
@@ -1126,7 +1131,7 @@
}
EXPORT_SYMBOL_GPL(setup_irq);
- /*
+/*
* Internal function to unregister an irqaction - used to free
* regular and special interrupts that are part of the architecture.
*/
@@ -1224,7 +1229,10 @@
*/
void remove_irq(unsigned int irq, struct irqaction *act)
{
- __free_irq(irq, act->dev_id);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
+ __free_irq(irq, act->dev_id);
}
EXPORT_SYMBOL_GPL(remove_irq);
@@ -1246,7 +1254,7 @@
{
struct irq_desc *desc = irq_to_desc(irq);
- if (!desc)
+ if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return;
#ifdef CONFIG_SMP
@@ -1324,7 +1332,8 @@
if (!desc)
return -EINVAL;
- if (!irq_settings_can_request(desc))
+ if (!irq_settings_can_request(desc) ||
+ WARN_ON(irq_settings_is_per_cpu_devid(desc)))
return -EINVAL;
if (!handler) {
@@ -1409,3 +1418,194 @@
return !ret ? IRQC_IS_HARDIRQ : ret;
}
EXPORT_SYMBOL_GPL(request_any_context_irq);
+
+void enable_percpu_irq(unsigned int irq, unsigned int type)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
+
+ if (!desc)
+ return;
+
+ type &= IRQ_TYPE_SENSE_MASK;
+ if (type != IRQ_TYPE_NONE) {
+ int ret;
+
+ ret = __irq_set_trigger(desc, irq, type);
+
+ if (ret) {
+ WARN(1, "failed to set type for IRQ%d\n", irq);
+ goto out;
+ }
+ }
+
+ irq_percpu_enable(desc, cpu);
+out:
+ irq_put_desc_unlock(desc, flags);
+}
+
+void disable_percpu_irq(unsigned int irq)
+{
+ unsigned int cpu = smp_processor_id();
+ unsigned long flags;
+ struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
+
+ if (!desc)
+ return;
+
+ irq_percpu_disable(desc, cpu);
+ irq_put_desc_unlock(desc, flags);
+}
+
+/*
+ * Internal function to unregister a percpu irqaction.
+ */
+static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ struct irqaction *action;
+ unsigned long flags;
+
+ WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
+
+ if (!desc)
+ return NULL;
+
+ raw_spin_lock_irqsave(&desc->lock, flags);
+
+ action = desc->action;
+ if (!action || action->percpu_dev_id != dev_id) {
+ WARN(1, "Trying to free already-free IRQ %d\n", irq);
+ goto bad;
+ }
+
+ if (!cpumask_empty(desc->percpu_enabled)) {
+ WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
+ irq, cpumask_first(desc->percpu_enabled));
+ goto bad;
+ }
+
+ /* Found it - now remove it from the list of entries: */
+ desc->action = NULL;
+
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+
+ unregister_handler_proc(irq, action);
+
+ module_put(desc->owner);
+ return action;
+
+bad:
+ raw_spin_unlock_irqrestore(&desc->lock, flags);
+ return NULL;
+}
+
+/**
+ * remove_percpu_irq - free a per-cpu interrupt
+ * @irq: Interrupt line to free
+ * @act: irqaction for the interrupt
+ *
+ * Used to remove interrupts statically setup by the early boot process.
+ */
+void remove_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (desc && irq_settings_is_per_cpu_devid(desc))
+ __free_percpu_irq(irq, act->percpu_dev_id);
+}
+
+/**
+ * free_percpu_irq - free an interrupt allocated with request_percpu_irq
+ * @irq: Interrupt line to free
+ * @dev_id: Device identity to free
+ *
+ * Remove a percpu interrupt handler. The handler is removed, but
+ * the interrupt line is not disabled. This must be done on each
+ * CPU before calling this function. The function does not return
+ * until any executing interrupts for this IRQ have completed.
+ *
+ * This function must not be called from interrupt context.
+ */
+void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return;
+
+ chip_bus_lock(desc);
+ kfree(__free_percpu_irq(irq, dev_id));
+ chip_bus_sync_unlock(desc);
+}
+
+/**
+ * setup_percpu_irq - setup a per-cpu interrupt
+ * @irq: Interrupt line to setup
+ * @act: irqaction for the interrupt
+ *
+ * Used to statically setup per-cpu interrupts in the early boot process.
+ */
+int setup_percpu_irq(unsigned int irq, struct irqaction *act)
+{
+ struct irq_desc *desc = irq_to_desc(irq);
+ int retval;
+
+ if (!desc || !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, act);
+ chip_bus_sync_unlock(desc);
+
+ return retval;
+}
+
+/**
+ * request_percpu_irq - allocate a percpu interrupt line
+ * @irq: Interrupt line to allocate
+ * @handler: Function to be called when the IRQ occurs.
+ * @devname: An ascii name for the claiming device
+ * @dev_id: A percpu cookie passed back to the handler function
+ *
+ * This call allocates interrupt resources, but doesn't
+ * automatically enable the interrupt. It has to be done on each
+ * CPU using enable_percpu_irq().
+ *
+ * Dev_id must be globally unique. It is a per-cpu variable, and
+ * the handler gets called with the interrupted CPU's instance of
+ * that variable.
+ */
+int request_percpu_irq(unsigned int irq, irq_handler_t handler,
+ const char *devname, void __percpu *dev_id)
+{
+ struct irqaction *action;
+ struct irq_desc *desc;
+ int retval;
+
+ if (!dev_id)
+ return -EINVAL;
+
+ desc = irq_to_desc(irq);
+ if (!desc || !irq_settings_can_request(desc) ||
+ !irq_settings_is_per_cpu_devid(desc))
+ return -EINVAL;
+
+ action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
+ if (!action)
+ return -ENOMEM;
+
+ action->handler = handler;
+ action->flags = IRQF_PERCPU;
+ action->name = devname;
+ action->percpu_dev_id = dev_id;
+
+ chip_bus_lock(desc);
+ retval = __setup_irq(irq, desc, action);
+ chip_bus_sync_unlock(desc);
+
+ if (retval)
+ kfree(action);
+
+ return retval;
+}
diff --git a/kernel/irq/settings.h b/kernel/irq/settings.h
index f166783..1162f10 100644
--- a/kernel/irq/settings.h
+++ b/kernel/irq/settings.h
@@ -13,6 +13,7 @@
_IRQ_MOVE_PCNTXT = IRQ_MOVE_PCNTXT,
_IRQ_NO_BALANCING = IRQ_NO_BALANCING,
_IRQ_NESTED_THREAD = IRQ_NESTED_THREAD,
+ _IRQ_PER_CPU_DEVID = IRQ_PER_CPU_DEVID,
_IRQF_MODIFY_MASK = IRQF_MODIFY_MASK,
};
@@ -24,6 +25,7 @@
#define IRQ_NOTHREAD GOT_YOU_MORON
#define IRQ_NOAUTOEN GOT_YOU_MORON
#define IRQ_NESTED_THREAD GOT_YOU_MORON
+#define IRQ_PER_CPU_DEVID GOT_YOU_MORON
#undef IRQF_MODIFY_MASK
#define IRQF_MODIFY_MASK GOT_YOU_MORON
@@ -39,6 +41,11 @@
return desc->status_use_accessors & _IRQ_PER_CPU;
}
+static inline bool irq_settings_is_per_cpu_devid(struct irq_desc *desc)
+{
+ return desc->status_use_accessors & _IRQ_PER_CPU_DEVID;
+}
+
static inline void irq_settings_set_per_cpu(struct irq_desc *desc)
{
desc->status_use_accessors |= _IRQ_PER_CPU;
diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
index 3744c59..80a8597 100644
--- a/kernel/power/Kconfig
+++ b/kernel/power/Kconfig
@@ -235,3 +235,7 @@
config PM_GENERIC_DOMAINS_RUNTIME
def_bool y
depends on PM_RUNTIME && PM_GENERIC_DOMAINS
+
+config CPU_PM
+ bool
+ depends on SUSPEND || CPU_IDLE