diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host
new file mode 100644
index 0000000..29a4f89
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-scsi_host
@@ -0,0 +1,13 @@
+What:		/sys/class/scsi_host/hostX/isci_id
+Date:		June 2011
+Contact:	Dave Jiang <dave.jiang@intel.com>
+Description:
+		This file contains the enumerated host ID for the Intel
+		SCU controller. The Intel(R) C600 Series Chipset SATA/SAS
+		Storage Control Unit embeds up to two 4-port controllers in
+		a single PCI device.  The controllers are enumerated in order
+		which usually means the lowest number scsi_host corresponds
+		with the first controller, but this association is not
+		guaranteed.  The 'isci_id' attribute unambiguously identifies
+		the controller index: '0' for the first controller,
+		'1' for the second.
diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt
index 6f3c598..06eb6d9 100644
--- a/Documentation/cgroups/memory.txt
+++ b/Documentation/cgroups/memory.txt
@@ -380,7 +380,7 @@
 
 5.2 stat file
 
-5.2.1 memory.stat file includes following statistics
+memory.stat file includes following statistics
 
 # per-memory cgroup local status
 cache		- # of bytes of page cache memory.
@@ -438,89 +438,6 @@
 	 file_mapped is accounted only when the memory cgroup is owner of page
 	 cache.)
 
-5.2.2 memory.vmscan_stat
-
-memory.vmscan_stat includes statistics information for memory scanning and
-freeing, reclaiming. The statistics shows memory scanning information since
-memory cgroup creation and can be reset to 0 by writing 0 as
-
- #echo 0 > ../memory.vmscan_stat
-
-This file contains following statistics.
-
-[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy]
-[param]_elapsed_ns_by_[reason]_[under_hierarchy]
-
-For example,
-
-  scanned_file_pages_by_limit indicates the number of scanned
-  file pages at vmscan.
-
-Now, 3 parameters are supported
-
-  scanned - the number of pages scanned by vmscan
-  rotated - the number of pages activated at vmscan
-  freed   - the number of pages freed by vmscan
-
-If "rotated" is high against scanned/freed, the memcg seems busy.
-
-Now, 2 reason are supported
-
-  limit - the memory cgroup's limit
-  system - global memory pressure + softlimit
-           (global memory pressure not under softlimit is not handled now)
-
-When under_hierarchy is added in the tail, the number indicates the
-total memcg scan of its children and itself.
-
-elapsed_ns is a elapsed time in nanosecond. This may include sleep time
-and not indicates CPU usage. So, please take this as just showing
-latency.
-
-Here is an example.
-
-# cat /cgroup/memory/A/memory.vmscan_stat
-scanned_pages_by_limit 9471864
-scanned_anon_pages_by_limit 6640629
-scanned_file_pages_by_limit 2831235
-rotated_pages_by_limit 4243974
-rotated_anon_pages_by_limit 3971968
-rotated_file_pages_by_limit 272006
-freed_pages_by_limit 2318492
-freed_anon_pages_by_limit 962052
-freed_file_pages_by_limit 1356440
-elapsed_ns_by_limit 351386416101
-scanned_pages_by_system 0
-scanned_anon_pages_by_system 0
-scanned_file_pages_by_system 0
-rotated_pages_by_system 0
-rotated_anon_pages_by_system 0
-rotated_file_pages_by_system 0
-freed_pages_by_system 0
-freed_anon_pages_by_system 0
-freed_file_pages_by_system 0
-elapsed_ns_by_system 0
-scanned_pages_by_limit_under_hierarchy 9471864
-scanned_anon_pages_by_limit_under_hierarchy 6640629
-scanned_file_pages_by_limit_under_hierarchy 2831235
-rotated_pages_by_limit_under_hierarchy 4243974
-rotated_anon_pages_by_limit_under_hierarchy 3971968
-rotated_file_pages_by_limit_under_hierarchy 272006
-freed_pages_by_limit_under_hierarchy 2318492
-freed_anon_pages_by_limit_under_hierarchy 962052
-freed_file_pages_by_limit_under_hierarchy 1356440
-elapsed_ns_by_limit_under_hierarchy 351386416101
-scanned_pages_by_system_under_hierarchy 0
-scanned_anon_pages_by_system_under_hierarchy 0
-scanned_file_pages_by_system_under_hierarchy 0
-rotated_pages_by_system_under_hierarchy 0
-rotated_anon_pages_by_system_under_hierarchy 0
-rotated_file_pages_by_system_under_hierarchy 0
-freed_pages_by_system_under_hierarchy 0
-freed_anon_pages_by_system_under_hierarchy 0
-freed_file_pages_by_system_under_hierarchy 0
-elapsed_ns_by_system_under_hierarchy 0
-
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp
index fa8776a..84d46c0 100644
--- a/Documentation/hwmon/coretemp
+++ b/Documentation/hwmon/coretemp
@@ -35,13 +35,6 @@
 All Sysfs entries are named with their core_id (represented here by 'X').
 tempX_input	 - Core temperature (in millidegrees Celsius).
 tempX_max	 - All cooling devices should be turned on (on Core2).
-		   Initialized with IA32_THERM_INTERRUPT. When the CPU
-		   temperature reaches this temperature, an interrupt is
-		   generated and tempX_max_alarm is set.
-tempX_max_hyst   - If the CPU temperature falls below than temperature,
-		   an interrupt is generated and tempX_max_alarm is reset.
-tempX_max_alarm  - Set if the temperature reaches or exceeds tempX_max.
-		   Reset if the temperature drops to or below tempX_max_hyst.
 tempX_crit	 - Maximum junction temperature (in millidegrees Celsius).
 tempX_crit_alarm - Set when Out-of-spec bit is set, never clears.
 		   Correct CPU operation is no longer guaranteed.
@@ -49,9 +42,10 @@
 		   number. For Package temp, this will be "Physical id Y",
 		   where Y is the package number.
 
-The TjMax temperature is set to 85 degrees C if undocumented model specific
-register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as
-(sometimes) documented in processor datasheet.
+On CPU models which support it, TjMax is read from a model-specific register.
+On other models, it is set to an arbitrary value based on weak heuristics.
+If these heuristics don't work for you, you can pass the correct TjMax value
+as a module parameter (tjmax).
 
 Appendix A. Known TjMax lists (TBD):
 Some information comes from ark.intel.com
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 614d038..854ed5ca 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -2086,9 +2086,12 @@
 			Override pmtimer IOPort with a hex value.
 			e.g. pmtmr=0x508
 
-	pnp.debug	[PNP]
-			Enable PNP debug messages.  This depends on the
-			CONFIG_PNP_DEBUG_MESSAGES option.
+	pnp.debug=1	[PNP]
+			Enable PNP debug messages (depends on the
+			CONFIG_PNP_DEBUG_MESSAGES option).  Change at run-time
+			via /sys/module/pnp/parameters/debug.  We always show
+			current resource usage; turning this on also shows
+			possible settings and some assignment information.
 
 	pnpacpi=	[ACPI]
 			{ off }
diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt
index 8006c22..25320bf 100644
--- a/Documentation/networking/dmfe.txt
+++ b/Documentation/networking/dmfe.txt
@@ -1,3 +1,5 @@
+Note: This driver doesn't have a maintainer.
+
 Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux.
 
 This program is free software; you can redistribute it and/or
@@ -55,7 +57,6 @@
 Authors:
 
 Sten Wang <sten_wang@davicom.com.tw >   : Original Author
-Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer
 
 Contributors:
 
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index 8154699..ca5cdcd 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1042,7 +1042,7 @@
 	The functional behaviour for certain settings is different
 	depending on whether local forwarding is enabled or not.
 
-accept_ra - BOOLEAN
+accept_ra - INTEGER
 	Accept Router Advertisements; autoconfigure using them.
 
 	Possible values are:
@@ -1106,7 +1106,7 @@
 	The amount of Duplicate Address Detection probes to send.
 	Default: 1
 
-forwarding - BOOLEAN
+forwarding - INTEGER
 	Configure interface-specific Host/Router behaviour.
 
 	Note: It is recommended to have the same setting on all
diff --git a/Documentation/networking/scaling.txt b/Documentation/networking/scaling.txt
index 58fd741..8ce7c30 100644
--- a/Documentation/networking/scaling.txt
+++ b/Documentation/networking/scaling.txt
@@ -243,7 +243,7 @@
 
 The number of entries in the per-queue flow table are set through:
 
- /sys/class/net/<dev>/queues/tx-<n>/rps_flow_cnt
+ /sys/class/net/<dev>/queues/rx-<n>/rps_flow_cnt
 
 == Suggested Configuration
 
diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt
index 0924aac..29bdf62 100644
--- a/Documentation/vm/transhuge.txt
+++ b/Documentation/vm/transhuge.txt
@@ -123,10 +123,11 @@
 khugepaged runs usually at low frequency so while one may not want to
 invoke defrag algorithms synchronously during the page faults, it
 should be worth invoking defrag at least in khugepaged. However it's
-also possible to disable defrag in khugepaged:
+also possible to disable defrag in khugepaged by writing 0 or enable
+defrag in khugepaged by writing 1:
 
-echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
-echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
+echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag
 
 You can also control how many pages khugepaged should scan at each
 pass:
diff --git a/MAINTAINERS b/MAINTAINERS
index 28f65c2..ace8f9c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1278,7 +1278,6 @@
 ATLX ETHERNET DRIVERS
 M:	Jay Cliburn <jcliburn@gmail.com>
 M:	Chris Snook <chris.snook@gmail.com>
-M:	Jie Yang <jie.yang@atheros.com>
 L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1574,7 +1573,6 @@
 
 BROCADE BNA 10 GIGABIT ETHERNET DRIVER
 M:	Rasesh Mody <rmody@brocade.com>
-M:	Debashis Dutt <ddutt@brocade.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bna/
@@ -1758,7 +1756,6 @@
 
 CISCO VIC ETHERNET NIC DRIVER
 M:	Christian Benvenuti <benve@cisco.com>
-M:	Vasanthy Kolluri <vkolluri@cisco.com>
 M:	Roopa Prabhu <roprabhu@cisco.com>
 M:	David Wang <dwang2@cisco.com>
 S:	Supported
@@ -3262,6 +3259,17 @@
 F:	drivers/input/input-mt.c
 K:	\b(ABS|SYN)_MT_
 
+INTEL C600 SERIES SAS CONTROLLER DRIVER
+M:	Intel SCU Linux support <intel-linux-scu@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Dave Jiang <dave.jiang@intel.com>
+M:	Ed Nadolski <edmund.nadolski@intel.com>
+L:	linux-scsi@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git
+S:	Maintained
+F:	drivers/scsi/isci/
+F:	firmware/isci/
+
 INTEL IDLE DRIVER
 M:	Len Brown <lenb@kernel.org>
 L:	linux-pm@lists.linux-foundation.org
@@ -4404,7 +4412,8 @@
 L:	coreteam@netfilter.org
 W:	http://www.netfilter.org/
 W:	http://www.iptables.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git
 S:	Supported
 F:	include/linux/netfilter*
 F:	include/linux/netfilter/
@@ -4774,7 +4783,7 @@
 
 OSD LIBRARY and FILESYSTEM
 M:	Boaz Harrosh <bharrosh@panasas.com>
-M:	Benny Halevy <bhalevy@panasas.com>
+M:	Benny Halevy <bhalevy@tonian.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
@@ -6365,7 +6374,6 @@
 F:	arch/arm/mach-tegra
 
 TEHUTI ETHERNET DRIVER
-M:	Alexander Indenbaum <baum@tehutinetworks.net>
 M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -7200,6 +7208,9 @@
 S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	drivers/leds/leds-wm83*.c
+F:	drivers/input/misc/wm831x-on.c
+F:	drivers/input/touchscreen/wm831x-ts.c
+F:	drivers/input/touchscreen/wm97*.c
 F:	drivers/mfd/wm8*.c
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
@@ -7209,6 +7220,7 @@
 F:	include/linux/mfd/wm831x/
 F:	include/linux/mfd/wm8350/
 F:	include/linux/mfd/wm8400*
+F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
 F:	sound/soc/codecs/wm*
 
diff --git a/Makefile b/Makefile
index 522fa47..31f967c 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION = -rc9
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 60cde53..8bb9362 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -51,7 +51,7 @@
         def_bool y
 
 config GENERIC_GPIO
-	def_bool y
+	bool
 
 config ZONE_DMA
 	bool
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2686959..7bbb035 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -861,6 +861,7 @@
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
 	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
 	select NEED_MACH_MEMORY_H
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
@@ -1310,6 +1311,20 @@
 	  processor into full low interrupt latency mode. ARM11MPCore
 	  is not affected.
 
+config ARM_ERRATA_764369
+	bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
+	depends on CPU_V7 && SMP
+	help
+	  This option enables the workaround for erratum 764369
+	  affecting Cortex-A9 MPCore with two or more processors (all
+	  current revisions). Under certain timing circumstances, a data
+	  cache line maintenance operation by MVA targeting an Inner
+	  Shareable memory region may fail to proceed up to either the
+	  Point of Coherency or to the Point of Unification of the
+	  system. This workaround adds a DSB instruction before the
+	  relevant cache maintenance functions and sets a specific bit
+	  in the diagnostic control register of the SCU.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts
index 4c05334..e581866 100644
--- a/arch/arm/boot/dts/tegra-harmony.dts
+++ b/arch/arm/boot/dts/tegra-harmony.dts
@@ -57,14 +57,14 @@
 	};
 
 	sdhci@c8000200 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 155 0>; /* power, gpio PT3 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 155 0>; /* gpio PT3 */
 	};
 
 	sdhci@c8000600 {
-		gpios = <&gpio 58 0>, /* cd, gpio PH2 */
-			<&gpio 59 0>, /* wp, gpio PH3 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 58 0>; /* gpio PH2 */
+		wp-gpios = <&gpio 59 0>; /* gpio PH3 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts
index 1940cae..64cedca 100644
--- a/arch/arm/boot/dts/tegra-seaboard.dts
+++ b/arch/arm/boot/dts/tegra-seaboard.dts
@@ -21,8 +21,8 @@
 	};
 
 	sdhci@c8000400 {
-		gpios = <&gpio 69 0>, /* cd, gpio PI5 */
-			<&gpio 57 0>, /* wp, gpio PH1 */
-			<&gpio 70 0>; /* power, gpio PI6 */
+		cd-gpios = <&gpio 69 0>; /* gpio PI5 */
+		wp-gpios = <&gpio 57 0>; /* gpio PH1 */
+		power-gpios = <&gpio 70 0>; /* gpio PI6 */
 	};
 };
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index a07b0e7..1cde34a 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -12,11 +12,11 @@
  */
 
 #include <linux/device.h>
+#include <linux/gpio.h>
 #include <linux/string.h>
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
 #include <asm/hardware/scoop.h>
 
 /* PCMCIA to Scoop linkage
diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig
index da53ff3..cd40bb5 100644
--- a/arch/arm/configs/exynos4_defconfig
+++ b/arch/arm/configs/exynos4_defconfig
@@ -11,6 +11,7 @@
 CONFIG_MACH_ARMLEX4210=y
 CONFIG_MACH_UNIVERSAL_C210=y
 CONFIG_MACH_NURI=y
+CONFIG_MACH_ORIGEN=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_SMP=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index db2cb7d..6ee781b 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -26,6 +26,7 @@
 CONFIG_MACH_MX28EVK=y
 CONFIG_MACH_STMP378X_DEVB=y
 CONFIG_MACH_TX28=y
+CONFIG_MACH_M28EVK=y
 # CONFIG_ARM_THUMB is not set
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 8c73900..253cc86 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -25,17 +25,17 @@
 
 #ifdef CONFIG_SMP
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	smp_mb();						\
 	__asm__ __volatile__(					\
-	"1:	ldrex	%1, [%2]\n"				\
+	"1:	ldrex	%1, [%3]\n"				\
 	"	" insn "\n"					\
-	"2:	strex	%1, %0, [%2]\n"				\
-	"	teq	%1, #0\n"				\
+	"2:	strex	%2, %0, [%3]\n"				\
+	"	teq	%2, #0\n"				\
 	"	bne	1b\n"					\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -73,14 +73,14 @@
 #include <linux/preempt.h>
 #include <asm/domain.h>
 
-#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg)	\
+#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg)	\
 	__asm__ __volatile__(					\
-	"1:	" T(ldr) "	%1, [%2]\n"			\
+	"1:	" T(ldr) "	%1, [%3]\n"			\
 	"	" insn "\n"					\
-	"2:	" T(str) "	%0, [%2]\n"			\
+	"2:	" T(str) "	%0, [%3]\n"			\
 	"	mov	%0, #0\n"				\
-	__futex_atomic_ex_table("%4")				\
-	: "=&r" (ret), "=&r" (oldval)				\
+	__futex_atomic_ex_table("%5")				\
+	: "=&r" (ret), "=&r" (oldval), "=&r" (tmp)		\
 	: "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)		\
 	: "cc", "memory")
 
@@ -117,7 +117,7 @@
 	int cmp = (encoded_op >> 24) & 15;
 	int oparg = (encoded_op << 8) >> 20;
 	int cmparg = (encoded_op << 20) >> 20;
-	int oldval = 0, ret;
+	int oldval = 0, ret, tmp;
 
 	if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
 		oparg = 1 << oparg;
@@ -129,19 +129,19 @@
 
 	switch (op) {
 	case FUTEX_OP_SET:
-		__futex_atomic_op("mov	%0, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("mov	%0, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ADD:
-		__futex_atomic_op("add	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("add	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_OR:
-		__futex_atomic_op("orr	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("orr	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	case FUTEX_OP_ANDN:
-		__futex_atomic_op("and	%0, %1, %3", ret, oldval, uaddr, ~oparg);
+		__futex_atomic_op("and	%0, %1, %4", ret, oldval, tmp, uaddr, ~oparg);
 		break;
 	case FUTEX_OP_XOR:
-		__futex_atomic_op("eor	%0, %1, %3", ret, oldval, uaddr, oparg);
+		__futex_atomic_op("eor	%0, %1, %4", ret, oldval, tmp, uaddr, oparg);
 		break;
 	default:
 		ret = -ENOSYS;
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 166a7a3..11ad0bf 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -4,4 +4,23 @@
 /* not all ARM platforms necessarily support this API ... */
 #include <mach/gpio.h>
 
+#ifndef __ARM_GPIOLIB_COMPLEX
+/* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
+#include <asm-generic/gpio.h>
+
+/* The trivial gpiolib dispatchers */
+#define gpio_get_value  __gpio_get_value
+#define gpio_set_value  __gpio_set_value
+#define gpio_cansleep   __gpio_cansleep
+#endif
+
+/*
+ * Provide a default gpio_to_irq() which should satisfy every case.
+ * However, some platforms want to do this differently, so allow them
+ * to override it.
+ */
+#ifndef gpio_to_irq
+#define gpio_to_irq	__gpio_to_irq
+#endif
+
 #endif /* _ARCH_ARM_GPIO_H */
diff --git a/arch/arm/include/asm/hardware/iop3xx-gpio.h b/arch/arm/include/asm/hardware/iop3xx-gpio.h
index b69d972..9eda7dc 100644
--- a/arch/arm/include/asm/hardware/iop3xx-gpio.h
+++ b/arch/arm/include/asm/hardware/iop3xx-gpio.h
@@ -28,6 +28,8 @@
 #include <mach/hardware.h>
 #include <asm-generic/gpio.h>
 
+#define __ARM_GPIOLIB_COMPLEX
+
 #define IOP3XX_N_GPIOS	8
 
 static inline int gpio_get_value(unsigned gpio)
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 2c04ed5..c60a294 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -478,8 +478,8 @@
 /*
  * Unimplemented (or alternatively implemented) syscalls
  */
-#define __IGNORE_fadvise64_64		1
-#define __IGNORE_migrate_pages		1
+#define __IGNORE_fadvise64_64
+#define __IGNORE_migrate_pages
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */
diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c
index 5b6d536..8f5dd79 100644
--- a/arch/arm/kernel/smp_scu.c
+++ b/arch/arm/kernel/smp_scu.c
@@ -13,6 +13,7 @@
 
 #include <asm/smp_scu.h>
 #include <asm/cacheflush.h>
+#include <asm/cputype.h>
 
 #define SCU_CTRL		0x00
 #define SCU_CONFIG		0x04
@@ -37,6 +38,15 @@
 {
 	u32 scu_ctrl;
 
+#ifdef CONFIG_ARM_ERRATA_764369
+	/* Cortex-A9 only */
+	if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) {
+		scu_ctrl = __raw_readl(scu_base + 0x30);
+		if (!(scu_ctrl & 1))
+			__raw_writel(scu_ctrl | 0x1, scu_base + 0x30);
+	}
+#endif
+
 	scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
 	/* already enabled? */
 	if (scu_ctrl & 1)
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index bf977f8..4e66f62 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -23,8 +23,10 @@
 
 #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK)
 #define ARM_EXIT_KEEP(x)	x
+#define ARM_EXIT_DISCARD(x)
 #else
 #define ARM_EXIT_KEEP(x)
+#define ARM_EXIT_DISCARD(x)	x
 #endif
 
 OUTPUT_ARCH(arm)
@@ -39,6 +41,11 @@
 SECTIONS
 {
 	/*
+	 * XXX: The linker does not define how output sections are
+	 * assigned to input sections when there are multiple statements
+	 * matching the same input section name.  There is no documented
+	 * order of matching.
+	 *
 	 * unwind exit sections must be discarded before the rest of the
 	 * unwind sections get included.
 	 */
@@ -47,6 +54,9 @@
 		*(.ARM.extab.exit.text)
 		ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
 		ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
+		ARM_EXIT_DISCARD(EXIT_TEXT)
+		ARM_EXIT_DISCARD(EXIT_DATA)
+		EXIT_CALL
 #ifndef CONFIG_HOTPLUG
 		*(.ARM.exidx.devexit.text)
 		*(.ARM.extab.devexit.text)
@@ -58,6 +68,8 @@
 #ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
 #endif
+		*(.discard)
+		*(.discard.*)
 	}
 
 #ifdef CONFIG_XIP_KERNEL
@@ -279,9 +291,6 @@
 
 	STABS_DEBUG
 	.comment 0 : { *(.comment) }
-
-	/* Default discards */
-	DISCARDS
 }
 
 /*
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2248467..04a85c5 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -182,6 +182,11 @@
 	help
 	  Select this if you are using the eco920 board
 
+config MACH_RSI_EWS
+	bool "RSI Embedded Webserver"
+	depends on ARCH_AT91RM9200
+	help
+	  Select this if you are using RSIs EWS board.
 endif
 
 # ----------------------------------------------------------
@@ -381,6 +386,14 @@
 	  This enables support for the GS_IA18_S board
 	  produced by GeoSIG Ltd company. This is an internet accelerograph.
 	  <http://www.geosig.com>
+
+config MACH_USB_A9G20
+	bool "CALAO USB-A9G20"
+	depends on ARCH_AT91SAM9G20
+	help
+	  Select this if you are using a Calao Systems USB-A9G20.
+	  <http://www.calao-systems.com>
+
 endif
 
 if (ARCH_AT91SAM9260 || ARCH_AT91SAM9G20)
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index bf57e8b..d992dd5 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -36,12 +36,13 @@
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
 obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
+obj-$(CONFIG_MACH_RSI_EWS)	+= board-rsi-ews.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
 obj-$(CONFIG_MACH_CAM60)	+= board-cam60.o
 obj-$(CONFIG_MACH_SAM9_L9260)	+= board-sam9-l9260.o
-obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a9260.o
+obj-$(CONFIG_MACH_USB_A9260)	+= board-usb-a926x.o
 obj-$(CONFIG_MACH_QIL_A9260)	+= board-qil-a9260.o
 obj-$(CONFIG_MACH_AFEB9260)	+= board-afeb-9260v1.o
 obj-$(CONFIG_MACH_CPU9260)	+= board-cpu9krea.o
@@ -53,7 +54,7 @@
 
 # AT91SAM9263 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a9263.o
+obj-$(CONFIG_MACH_USB_A9263)	+= board-usb-a926x.o
 obj-$(CONFIG_MACH_NEOCORE926)	+= board-neocore926.o
 
 # AT91SAM9RL board-specific support
@@ -67,6 +68,7 @@
 obj-$(CONFIG_MACH_PORTUXG20)	+= board-stamp9g20.o
 obj-$(CONFIG_MACH_PCONTROL_G20)	+= board-pcontrol-g20.o board-stamp9g20.o
 obj-$(CONFIG_MACH_GSIA18S)	+= board-gsia18s.o board-stamp9g20.o
+obj-$(CONFIG_MACH_USB_A9G20)	+= board-usb-a926x.o
 
 # AT91SAM9260/AT91SAM9G20 board-specific support
 obj-$(CONFIG_MACH_SNAPPER_9260)	+= board-snapper9260.o
diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c
index dba0d8d..f87f504 100644
--- a/arch/arm/mach-at91/at91cap9_devices.c
+++ b/arch/arm/mach-at91/at91cap9_devices.c
@@ -16,6 +16,7 @@
 #include <asm/mach/irq.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
@@ -23,7 +24,6 @@
 
 #include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/gpio.h>
 #include <mach/at91cap9.h>
 #include <mach/at91cap9_matrix.h>
 #include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 7227755..978be95 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -14,11 +14,11 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200.h>
 #include <mach/at91rm9200_mc.h>
 
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 39f81f4..a53b3de 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -13,11 +13,11 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 #include <mach/at91sam9260.h>
 #include <mach/at91sam9260_matrix.h>
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 0f91792..4e647b6 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -14,6 +14,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
@@ -21,7 +22,6 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9261.h>
 #include <mach/at91sam9261_matrix.h>
 #include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index a050f41..dd7662b 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -13,6 +13,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
@@ -20,7 +21,6 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9263.h>
 #include <mach/at91sam9263_matrix.h>
 #include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 600bffb..c3dfb1b 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -13,6 +13,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 #include <linux/atmel-mci.h>
@@ -21,7 +22,6 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9g45.h>
 #include <mach/at91sam9g45_matrix.h>
 #include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index aacb19d..305a851 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -10,6 +10,7 @@
 #include <asm/mach/map.h>
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/i2c-gpio.h>
 
@@ -17,7 +18,6 @@
 #include <video/atmel_lcdc.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9rl.h>
 #include <mach/at91sam9rl_matrix.h>
 #include <mach/at91sam9_smc.h>
diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c
index 5aa5885..367d5cd 100644
--- a/arch/arm/mach-at91/board-1arm.c
+++ b/arch/arm/mach-at91/board-1arm.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -34,7 +35,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c
index b0c796d..0487ea1 100644
--- a/arch/arm/mach-at91/board-afeb-9260v1.c
+++ b/arch/arm/mach-at91/board-afeb-9260v1.c
@@ -25,6 +25,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -43,7 +44,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c
index d1abd58..747b2ea 100644
--- a/arch/arm/mach-at91/board-cam60.c
+++ b/arch/arm/mach-at91/board-cam60.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 
 #include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c
index 679b0b7..0626703 100644
--- a/arch/arm/mach-at91/board-cap9adk.c
+++ b/arch/arm/mach-at91/board-cap9adk.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -41,7 +42,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91cap9_matrix.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c
index c578c5d90..774c87f 100644
--- a/arch/arm/mach-at91/board-carmeva.c
+++ b/arch/arm/mach-at91/board-carmeva.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -35,7 +36,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c
index f4da8a1..fc885a4 100644
--- a/arch/arm/mach-at91/board-cpu9krea.c
+++ b/arch/arm/mach-at91/board-cpu9krea.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -40,7 +41,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91sam9260_matrix.h>
 
diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c
index 2d919f5..d35e65b 100644
--- a/arch/arm/mach-at91/board-cpuat91.c
+++ b/arch/arm/mach-at91/board-cpuat91.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -36,7 +37,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/cpu.h>
 
diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c
index 17654d5..c393666 100644
--- a/arch/arm/mach-at91/board-csb337.c
+++ b/arch/arm/mach-at91/board-csb337.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -38,7 +39,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c
index 72b5567..586100e 100644
--- a/arch/arm/mach-at91/board-csb637.c
+++ b/arch/arm/mach-at91/board-csb637.c
@@ -20,6 +20,7 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 #include <linux/mm.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
@@ -35,7 +36,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c
index 01170a2..45db7a3 100644
--- a/arch/arm/mach-at91/board-eb9200.c
+++ b/arch/arm/mach-at91/board-eb9200.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c
index 7c0313c..2f9c16d2 100644
--- a/arch/arm/mach-at91/board-ecbat91.c
+++ b/arch/arm/mach-at91/board-ecbat91.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c
index 4a17089..3bae73e 100644
--- a/arch/arm/mach-at91/board-kafa.c
+++ b/arch/arm/mach-at91/board-kafa.c
@@ -19,6 +19,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -34,7 +35,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c
index 9dc8d49..15a3f1a 100644
--- a/arch/arm/mach-at91/board-kb9202.c
+++ b/arch/arm/mach-at91/board-kb9202.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -35,7 +36,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 #include <mach/at91rm9200_mc.h>
 
diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c
index 9bc6ab3..6094496 100644
--- a/arch/arm/mach-at91/board-neocore926.c
+++ b/arch/arm/mach-at91/board-neocore926.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -44,7 +45,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 
 #include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c
index b7b8390..0a8fe6a 100644
--- a/arch/arm/mach-at91/board-picotux200.c
+++ b/arch/arm/mach-at91/board-picotux200.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
index 81f9110..938cc39 100644
--- a/arch/arm/mach-at91/board-qil-a9260.c
+++ b/arch/arm/mach-at91/board-qil-a9260.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -40,7 +41,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c
index 6f08faa..b4ac30e 100644
--- a/arch/arm/mach-at91/board-rm9200dk.c
+++ b/arch/arm/mach-at91/board-rm9200dk.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 85bcccd..99fd7f8 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -39,7 +40,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c
new file mode 100644
index 0000000..e927df0
--- /dev/null
+++ b/arch/arm/mach-at91/board-rsi-ews.c
@@ -0,0 +1,233 @@
+/*
+ * board-rsi-ews.c
+ *
+ *  Copyright (C)
+ *  2005 SAN People,
+ *  2008-2011 R-S-I Elektrotechnik GmbH & Co. KG
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+
+#include <linux/gpio.h>
+
+#include "generic.h"
+
+static void __init rsi_ews_init_early(void)
+{
+	/* Initialize processor: 18.432 MHz crystal */
+	at91_initialize(18432000);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	/* This one is for debugging */
+	at91_register_uart(0, 0, 0);
+
+	/* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+	/* Dialin/-out modem interface */
+	at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+			   | ATMEL_UART_RI);
+
+	/* USART3 on ttyS4. (Rx, Tx, RTS) */
+	/* RS485 communication */
+	at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_RTS);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+/*
+ * Ethernet
+ */
+static struct at91_eth_data rsi_ews_eth_data __initdata = {
+	.phy_irq_pin	= AT91_PIN_PC4,
+	.is_rmii	= 1,
+};
+
+/*
+ * USB Host
+ */
+static struct at91_usbh_data rsi_ews_usbh_data __initdata = {
+	.ports		= 1,
+};
+
+/*
+ * SD/MC
+ */
+static struct at91_mmc_data rsi_ews_mmc_data __initdata = {
+	.slot_b		= 0,
+	.wire4		= 1,
+	.det_pin	= AT91_PIN_PB27,
+	.wp_pin		= AT91_PIN_PB29,
+};
+
+/*
+ * I2C
+ */
+static struct i2c_board_info rsi_ews_i2c_devices[] __initdata = {
+	{
+		I2C_BOARD_INFO("ds1337", 0x68),
+	},
+	{
+		I2C_BOARD_INFO("24c01", 0x50),
+	}
+};
+
+/*
+ * LEDs
+ */
+static struct gpio_led rsi_ews_leds[] = {
+	{
+		.name			= "led0",
+		.gpio			= AT91_PIN_PB6,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led1",
+		.gpio			= AT91_PIN_PB7,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led2",
+		.gpio			= AT91_PIN_PB8,
+		.active_low		= 0,
+	},
+	{
+		.name			= "led3",
+		.gpio			= AT91_PIN_PB9,
+		.active_low		= 0,
+	},
+};
+
+/*
+ * DataFlash
+ */
+static struct spi_board_info rsi_ews_spi_devices[] = {
+	{	/* DataFlash chip 1*/
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 5 * 1000 * 1000,
+	},
+	{	/* DataFlash chip 2*/
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 1,
+		.max_speed_hz	= 5 * 1000 * 1000,
+	},
+};
+
+/*
+ * NOR flash
+ */
+static struct mtd_partition rsiews_nor_partitions[] = {
+	{
+		.name		= "boot",
+		.offset		= 0,
+		.size		= 3 * SZ_128K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+	{
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_2M - (3 * SZ_128K)
+	},
+	{
+		.name		= "root",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= SZ_8M
+	},
+	{
+		.name		= "kernelupd",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 3 * SZ_512K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+	{
+		.name		= "rootupd",
+		.offset		= MTDPART_OFS_NXTBLK,
+		.size		= 9 * SZ_512K,
+		.mask_flags	= MTD_WRITEABLE
+	},
+};
+
+static struct physmap_flash_data rsiews_nor_data = {
+	.width		= 2,
+	.parts		= rsiews_nor_partitions,
+	.nr_parts	= ARRAY_SIZE(rsiews_nor_partitions),
+};
+
+#define NOR_BASE	AT91_CHIPSELECT_0
+#define NOR_SIZE	SZ_16M
+
+static struct resource nor_flash_resources[] = {
+	{
+		.start	= NOR_BASE,
+		.end	= NOR_BASE + NOR_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	}
+};
+
+static struct platform_device rsiews_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+				.platform_data	= &rsiews_nor_data,
+	},
+	.resource	= nor_flash_resources,
+	.num_resources	= ARRAY_SIZE(nor_flash_resources),
+};
+
+/*
+ * Init Func
+ */
+static void __init rsi_ews_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	at91_set_gpio_output(AT91_PIN_PA21, 0);
+	/* Ethernet */
+	at91_add_device_eth(&rsi_ews_eth_data);
+	/* USB Host */
+	at91_add_device_usbh(&rsi_ews_usbh_data);
+	/* I2C */
+	at91_add_device_i2c(rsi_ews_i2c_devices,
+			ARRAY_SIZE(rsi_ews_i2c_devices));
+	/* SPI */
+	at91_add_device_spi(rsi_ews_spi_devices,
+			ARRAY_SIZE(rsi_ews_spi_devices));
+	/* MMC */
+	at91_add_device_mmc(0, &rsi_ews_mmc_data);
+	/* NOR Flash */
+	platform_device_register(&rsiews_nor_flash);
+	/* LEDs */
+	at91_gpio_leds(rsi_ews_leds, ARRAY_SIZE(rsi_ews_leds));
+}
+
+MACHINE_START(RSI_EWS, "RSI EWS")
+	/* Maintainer: Josef Holzmayr <holzmayr@rsi-elektrotechnik.de> */
+	.timer		= &at91rm9200_timer,
+	.map_io		= at91_map_io,
+	.init_early	= rsi_ews_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= rsi_ews_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c
index 4d3a02f..2a21e79 100644
--- a/arch/arm/mach-at91/board-sam9-l9260.c
+++ b/arch/arm/mach-at91/board-sam9-l9260.c
@@ -21,6 +21,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -37,7 +38,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 
 #include "sam9_smc.h"
diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c
index 8a50c3e..89c8b57 100644
--- a/arch/arm/mach-at91/board-sam9260ek.c
+++ b/arch/arm/mach-at91/board-sam9260ek.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -41,7 +42,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 5096a0e..3741f43 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -45,7 +46,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c
index ea8f185..a580dd4 100644
--- a/arch/arm/mach-at91/board-sam9263ek.c
+++ b/arch/arm/mach-at91/board-sam9263ek.c
@@ -20,6 +20,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -44,7 +45,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
index 817f59d..8d77c2f 100644
--- a/arch/arm/mach-at91/board-sam9g20ek.c
+++ b/arch/arm/mach-at91/board-sam9g20ek.c
@@ -18,6 +18,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -41,7 +42,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/system_rev.h>
 
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index ad234cc..2d6203a 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -38,7 +39,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 #include <mach/system_rev.h>
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index 4f14b54..39a28ef 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -30,7 +31,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91sam9_smc.h>
 #include <mach/at91_shdwc.h>
 
diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c
deleted file mode 100644
index 8c4c1a0..0000000
--- a/arch/arm/mach-at91/board-usb-a9260.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9260.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2006 Atmel
- *  Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.000 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PC5,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PA31,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Uboot & Kernel",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Root FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-	{
-		.name	= "FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PC13,
-	.enable_pin	= AT91_PIN_PC14,
-	.partition_info	= nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * GPIO Buttons
- */
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 0,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* shutdown controller, wakeup button (5 msec low) */
-	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9260, "CALAO USB_A9260")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c
deleted file mode 100644
index 25e7937..0000000
--- a/arch/arm/mach-at91/board-usb-a9263.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-usb-a9263.c
- *
- *  Copyright (C) 2005 SAN People
- *  Copyright (C) 2007 Atmel Corporation.
- *  Copyright (C) 2007 Calao-systems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91_shdwc.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init ek_init_early(void)
-{
-	/* Initialize processor: 12.00 MHz crystal */
-	at91_initialize(12000000);
-
-	/* DBGU on ttyS0. (Rx & Tx only) */
-	at91_register_uart(0, 0, 0);
-
-	/* set serial console to ttyS0 (ie, DBGU) */
-	at91_set_serial_console(0);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
-	.ports		= 2,
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
-	.vbus_pin	= AT91_PIN_PB11,
-	.pullup_pin	= 0,		/* pull-up driven by UDC */
-};
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !defined(CONFIG_MMC_AT91)
-	{	/* DataFlash chip */
-		.modalias	= "mtd_dataflash",
-		.chip_select	= 0,
-		.max_speed_hz	= 15 * 1000 * 1000,
-		.bus_num	= 0,
-	}
-#endif
-};
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata ek_macb_data = {
-	.phy_irq_pin	= AT91_PIN_PE31,
-	.is_rmii	= 1,
-};
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
-	{
-		.name	= "Linux Kernel",
-		.offset	= 0,
-		.size	= SZ_16M,
-	},
-	{
-		.name	= "Root FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	},
-	{
-		.name	= "FS",
-		.offset	= MTDPART_OFS_NXTBLK,
-		.size	= 120 * SZ_1M,
-	}
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
-	*num_partitions = ARRAY_SIZE(ek_nand_partition);
-	return ek_nand_partition;
-}
-
-static struct atmel_nand_data __initdata ek_nand_data = {
-	.ale		= 21,
-	.cle		= 22,
-//	.det_pin	= ... not connected
-	.rdy_pin	= AT91_PIN_PA22,
-	.enable_pin	= AT91_PIN_PD15,
-	.partition_info	= nand_partitions,
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
-	.ncs_read_setup		= 0,
-	.nrd_setup		= 1,
-	.ncs_write_setup	= 0,
-	.nwe_setup		= 1,
-
-	.ncs_read_pulse		= 3,
-	.nrd_pulse		= 3,
-	.ncs_write_pulse	= 3,
-	.nwe_pulse		= 3,
-
-	.read_cycle		= 5,
-	.write_cycle		= 5,
-
-	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
-	.tdf_cycles		= 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
-	/* configure chip-select 3 (NAND) */
-	sam9_smc_configure(3, &ek_nand_smc_config);
-
-	at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
-	{	/* USER PUSH BUTTON */
-		.code		= KEY_ENTER,
-		.gpio		= AT91_PIN_PB10,
-		.active_low	= 1,
-		.desc		= "user_pb",
-		.wakeup		= 1,
-	}
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
-	.buttons	= ek_buttons,
-	.nbuttons	= ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
-	.name		= "gpio-keys",
-	.id		= -1,
-	.num_resources	= 0,
-	.dev		= {
-		.platform_data	= &ek_button_data,
-	}
-};
-
-static void __init ek_add_device_buttons(void)
-{
-	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
-	at91_set_deglitch(AT91_PIN_PB10, 1);
-
-	platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
-	{	/* user_led (green) */
-		.name			= "user_led",
-		.gpio			= AT91_PIN_PB21,
-		.active_low		= 1,
-		.default_trigger	= "heartbeat",
-	}
-};
-
-
-static void __init ek_board_init(void)
-{
-	/* Serial */
-	at91_add_device_serial();
-	/* USB Host */
-	at91_add_device_usbh(&ek_usbh_data);
-	/* USB Device */
-	at91_add_device_udc(&ek_udc_data);
-	/* SPI */
-	at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-	/* Ethernet */
-	at91_add_device_eth(&ek_macb_data);
-	/* NAND */
-	ek_add_device_nand();
-	/* I2C */
-	at91_add_device_i2c(NULL, 0);
-	/* Push Buttons */
-	ek_add_device_buttons();
-	/* LEDs */
-	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-	/* shutdown controller, wakeup button (5 msec low) */
-	at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10) | AT91_SHDW_WKMODE0_LOW
-				| AT91_SHDW_RTTWKEN);
-}
-
-MACHINE_START(USB_A9263, "CALAO USB_A9263")
-	/* Maintainer: calao-systems */
-	.timer		= &at91sam926x_timer,
-	.map_io		= at91_map_io,
-	.init_early	= ek_init_early,
-	.init_irq	= at91_init_irq_default,
-	.init_machine	= ek_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c
new file mode 100644
index 0000000..5852d3d
--- /dev/null
+++ b/arch/arm/mach-at91/board-usb-a926x.c
@@ -0,0 +1,383 @@
+/*
+ * linux/arch/arm/mach-at91/board-usb-a926x.c
+ *
+ *  Copyright (C) 2005 SAN People
+ *  Copyright (C) 2007 Atmel Corporation.
+ *  Copyright (C) 2007 Calao-systems
+ *  Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/spi/mmc_spi.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91_shdwc.h>
+
+#include "sam9_smc.h"
+#include "generic.h"
+
+
+static void __init ek_init_early(void)
+{
+	/* Initialize processor: 12.00 MHz crystal */
+	at91_initialize(12000000);
+
+	/* DBGU on ttyS0. (Rx & Tx only) */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+/*
+ * USB Host port
+ */
+static struct at91_usbh_data __initdata ek_usbh_data = {
+	.ports		= 2,
+};
+
+/*
+ * USB Device port
+ */
+static struct at91_udc_data __initdata ek_udc_data = {
+	.vbus_pin	= AT91_PIN_PB11,
+	.pullup_pin	= 0,		/* pull-up driven by UDC */
+};
+
+static void __init ek_add_device_udc(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_udc_data.vbus_pin = AT91_PIN_PC5;
+
+	at91_add_device_udc(&ek_udc_data);
+}
+
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+#define MMC_SPI_CARD_DETECT_INT AT91_PIN_PC4
+static int at91_mmc_spi_init(struct device *dev,
+	irqreturn_t (*detect_int)(int, void *), void *data)
+{
+	/* Configure Interrupt pin as input, no pull-up */
+	at91_set_gpio_input(MMC_SPI_CARD_DETECT_INT, 0);
+	return request_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), detect_int,
+		IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+		"mmc-spi-detect", data);
+}
+
+static void at91_mmc_spi_exit(struct device *dev, void *data)
+{
+	free_irq(gpio_to_irq(MMC_SPI_CARD_DETECT_INT), data);
+}
+
+static struct mmc_spi_platform_data at91_mmc_spi_pdata = {
+	.init = at91_mmc_spi_init,
+	.exit = at91_mmc_spi_exit,
+	.detect_delay = 100, /* msecs */
+};
+#endif
+
+/*
+ * SPI devices.
+ */
+static struct spi_board_info usb_a9263_spi_devices[] = {
+#if !defined(CONFIG_MMC_AT91)
+	{	/* DataFlash chip */
+		.modalias	= "mtd_dataflash",
+		.chip_select	= 0,
+		.max_speed_hz	= 15 * 1000 * 1000,
+		.bus_num	= 0,
+	}
+#endif
+};
+
+static struct spi_board_info usb_a9g20_spi_devices[] = {
+#if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
+	{
+		.modalias = "mmc_spi",
+		.max_speed_hz = 20000000,	/* max spi clock (SCK) speed in HZ */
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &at91_mmc_spi_pdata,
+		.mode = SPI_MODE_3,
+	},
+#endif
+};
+
+static void __init ek_add_device_spi(void)
+{
+	if (machine_is_usb_a9263())
+		at91_add_device_spi(usb_a9263_spi_devices, ARRAY_SIZE(usb_a9263_spi_devices));
+	else if (machine_is_usb_a9g20())
+		at91_add_device_spi(usb_a9g20_spi_devices, ARRAY_SIZE(usb_a9g20_spi_devices));
+}
+
+/*
+ * MACB Ethernet device
+ */
+static struct at91_eth_data __initdata ek_macb_data = {
+	.phy_irq_pin	= AT91_PIN_PE31,
+	.is_rmii	= 1,
+};
+
+static void __init ek_add_device_eth(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_macb_data.phy_irq_pin = AT91_PIN_PA31;
+
+	at91_add_device_eth(&ek_macb_data);
+}
+
+/*
+ * NAND flash
+ */
+static struct mtd_partition __initdata ek_nand_partition[] = {
+	{
+		.name	= "barebox",
+		.offset	= 0,
+		.size	= 3 * SZ_128K,
+	}, {
+		.name	= "bareboxenv",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
+		.name	= "bareboxenv2",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= SZ_128K,
+	}, {
+		.name	= "kernel",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 4 * SZ_1M,
+	}, {
+		.name	= "rootfs",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= 120 * SZ_1M,
+	}, {
+		.name	= "data",
+		.offset	= MTDPART_OFS_NXTBLK,
+		.size	= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+	*num_partitions = ARRAY_SIZE(ek_nand_partition);
+	return ek_nand_partition;
+}
+
+static struct atmel_nand_data __initdata ek_nand_data = {
+	.ale		= 21,
+	.cle		= 22,
+//	.det_pin	= ... not connected
+	.rdy_pin	= AT91_PIN_PA22,
+	.enable_pin	= AT91_PIN_PD15,
+	.partition_info	= nand_partitions,
+};
+
+static struct sam9_smc_config __initdata usb_a9260_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 1,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 1,
+
+	.ncs_read_pulse		= 3,
+	.nrd_pulse		= 3,
+	.ncs_write_pulse	= 3,
+	.nwe_pulse		= 3,
+
+	.read_cycle		= 5,
+	.write_cycle		= 5,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 2,
+};
+
+static struct sam9_smc_config __initdata usb_a9g20_nand_smc_config = {
+	.ncs_read_setup		= 0,
+	.nrd_setup		= 2,
+	.ncs_write_setup	= 0,
+	.nwe_setup		= 2,
+
+	.ncs_read_pulse		= 4,
+	.nrd_pulse		= 4,
+	.ncs_write_pulse	= 4,
+	.nwe_pulse		= 4,
+
+	.read_cycle		= 7,
+	.write_cycle		= 7,
+
+	.mode			= AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
+	.tdf_cycles		= 3,
+};
+
+static void __init ek_add_device_nand(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20()) {
+		ek_nand_data.rdy_pin	= AT91_PIN_PC13;
+		ek_nand_data.enable_pin	= AT91_PIN_PC14;
+	}
+
+	/* configure chip-select 3 (NAND) */
+	if (machine_is_usb_a9g20())
+		sam9_smc_configure(3, &usb_a9g20_nand_smc_config);
+	else
+		sam9_smc_configure(3, &usb_a9260_nand_smc_config);
+
+	at91_add_device_nand(&ek_nand_data);
+}
+
+
+/*
+ * GPIO Buttons
+ */
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button ek_buttons[] = {
+	{	/* USER PUSH BUTTON */
+		.code		= KEY_ENTER,
+		.gpio		= AT91_PIN_PB10,
+		.active_low	= 1,
+		.desc		= "user_pb",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data ek_button_data = {
+	.buttons	= ek_buttons,
+	.nbuttons	= ARRAY_SIZE(ek_buttons),
+};
+
+static struct platform_device ek_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &ek_button_data,
+	}
+};
+
+static void __init ek_add_device_buttons(void)
+{
+	at91_set_GPIO_periph(AT91_PIN_PB10, 1);	/* user push button, pull up enabled */
+	at91_set_deglitch(AT91_PIN_PB10, 1);
+
+	platform_device_register(&ek_button_device);
+}
+#else
+static void __init ek_add_device_buttons(void) {}
+#endif
+
+/*
+ * LEDs
+ */
+static struct gpio_led ek_leds[] = {
+	{	/* user_led (green) */
+		.name			= "user_led",
+		.gpio			= AT91_PIN_PB21,
+		.active_low		= 1,
+		.default_trigger	= "heartbeat",
+	}
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rv3029c2", 0x56),
+	},
+};
+
+static void __init ek_add_device_leds(void)
+{
+	if (machine_is_usb_a9260() || machine_is_usb_a9g20())
+		ek_leds[0].active_low = 0;
+
+	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+}
+
+static void __init ek_board_init(void)
+{
+	/* Serial */
+	at91_add_device_serial();
+	/* USB Host */
+	at91_add_device_usbh(&ek_usbh_data);
+	/* USB Device */
+	ek_add_device_udc();
+	/* SPI */
+	ek_add_device_spi();
+	/* Ethernet */
+	ek_add_device_eth();
+	/* NAND */
+	ek_add_device_nand();
+	/* Push Buttons */
+	ek_add_device_buttons();
+	/* LEDs */
+	ek_add_device_leds();
+
+	if (machine_is_usb_a9g20()) {
+		/* I2C */
+		at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+	} else {
+		/* I2C */
+		at91_add_device_i2c(NULL, 0);
+		/* shutdown controller, wakeup button (5 msec low) */
+		at91_sys_write(AT91_SHDW_MR, AT91_SHDW_CPTWK0_(10)
+				| AT91_SHDW_WKMODE0_LOW
+				| AT91_SHDW_RTTWKEN);
+	}
+}
+
+MACHINE_START(USB_A9263, "CALAO USB_A9263")
+	/* Maintainer: calao-systems */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9260, "CALAO USB_A9260")
+	/* Maintainer: calao-systems */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
+
+MACHINE_START(USB_A9G20, "CALAO USB_A92G0")
+	/* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */
+	.timer		= &at91sam926x_timer,
+	.map_io		= at91_map_io,
+	.init_early	= ek_init_early,
+	.init_irq	= at91_init_irq_default,
+	.init_machine	= ek_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c
index 95edcbd..3c288b3 100644
--- a/arch/arm/mach-at91/board-yl-9200.c
+++ b/arch/arm/mach-at91/board-yl-9200.c
@@ -22,6 +22,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/mm.h>
 #include <linux/module.h>
@@ -43,7 +44,6 @@
 
 #include <mach/hardware.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
 #include <mach/at91rm9200_mc.h>
 #include <mach/cpu.h>
 
diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
index 4615528..224e9e2 100644
--- a/arch/arm/mach-at91/gpio.c
+++ b/arch/arm/mach-at91/gpio.c
@@ -11,6 +11,7 @@
 
 #include <linux/clk.h>
 #include <linux/errno.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/debugfs.h>
@@ -22,9 +23,6 @@
 
 #include <mach/hardware.h>
 #include <mach/at91_pio.h>
-#include <mach/gpio.h>
-
-#include <asm/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-at91/include/mach/gpio.h b/arch/arm/mach-at91/include/mach/gpio.h
index 056dc66..2b9a1f5 100644
--- a/arch/arm/mach-at91/include/mach/gpio.h
+++ b/arch/arm/mach-at91/include/mach/gpio.h
@@ -214,11 +214,6 @@
  */
 
 #include <asm/errno.h>
-#include <asm-generic/gpio.h>		/* cansleep wrappers */
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
 
 #define gpio_to_irq(gpio) (gpio)
 #define irq_to_gpio(irq)  (irq)
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 31ac2d9..85820ad 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -64,7 +64,12 @@
 
 #elif defined(CONFIG_ARCH_AT91SAM9G20)
 
+#if defined(CONFIG_MACH_USB_A9G20)
+#define AT91SAM9_MASTER_CLOCK	133000000
+#else
 #define AT91SAM9_MASTER_CLOCK	132096000
+#endif
+
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
 #elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c
index 0415a839..8dfafe7 100644
--- a/arch/arm/mach-at91/leds.c
+++ b/arch/arm/mach-at91/leds.c
@@ -9,13 +9,13 @@
  * 2 of the License, or (at your option) any later version.
 */
 
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
 
 
 /* ------------------------------------------------------------------------- */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4159eca..7046158 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -10,6 +10,7 @@
  * (at your option) any later version.
  */
 
+#include <linux/gpio.h>
 #include <linux/suspend.h>
 #include <linux/sched.h>
 #include <linux/proc_fs.h>
@@ -25,7 +26,6 @@
 #include <asm/mach/irq.h>
 
 #include <mach/at91_pmc.h>
-#include <mach/gpio.h>
 #include <mach/cpu.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 0b87a1c..495e313 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
 
 # Common objects
 obj-y 			:= time.o clock.o serial.o io.o psc.o \
-			   gpio.o dma.o usb.o common.o sram.o aemif.o
+			   dma.o usb.o common.o sram.o aemif.o
 
 obj-$(CONFIG_DAVINCI_MUX)		+= mux.o
 
@@ -17,7 +17,6 @@
 obj-$(CONFIG_ARCH_DAVINCI_DA830)        += da830.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_DA850)        += da850.o devices-da8xx.o
 obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += tnetv107x.o devices-tnetv107x.o
-obj-$(CONFIG_ARCH_DAVINCI_TNETV107X)    += gpio-tnetv107x.o
 
 obj-$(CONFIG_AINTC)			+= irq.o
 obj-$(CONFIG_CP_INTC)			+= cp_intc.o
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 2ed2f82..a6bf5dc 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,6 +8,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 
@@ -19,7 +20,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 935dbed..4aae015 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,6 +11,7 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
@@ -27,7 +28,7 @@
 #include <mach/da8xx.h>
 #include <mach/cpufreq.h>
 #include <mach/pm.h>
-#include <mach/gpio.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a3a94e9..c143f43 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -13,7 +13,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 
 #include <linux/spi/spi.h>
 
@@ -30,6 +29,7 @@
 #include <mach/common.h>
 #include <mach/asp.h>
 #include <mach/spi.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index 4604e72..679e168 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -17,7 +17,6 @@
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 
 #include <asm/mach/map.h>
@@ -34,7 +33,7 @@
 #include <mach/asp.h>
 #include <mach/keyscan.h>
 #include <mach/spi.h>
-
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 4c82c27..9a27466 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,7 +12,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -26,6 +25,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 1802e71..03e5f49 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,7 +13,6 @@
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 
@@ -27,6 +26,7 @@
 #include <mach/serial.h>
 #include <mach/common.h>
 #include <mach/asp.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-davinci/include/mach/gpio-davinci.h b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
new file mode 100644
index 0000000..1fdd1fd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/gpio-davinci.h
@@ -0,0 +1,91 @@
+/*
+ * TI DaVinci GPIO Support
+ *
+ * Copyright (c) 2006 David Brownell
+ * Copyright (c) 2007, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef	__DAVINCI_DAVINCI_GPIO_H
+#define	__DAVINCI_DAVINCI_GPIO_H
+
+#include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <asm-generic/gpio.h>
+
+#include <mach/irqs.h>
+#include <mach/common.h>
+
+#define DAVINCI_GPIO_BASE 0x01C67000
+
+enum davinci_gpio_type {
+	GPIO_TYPE_DAVINCI = 0,
+	GPIO_TYPE_TNETV107X,
+};
+
+/*
+ * basic gpio routines
+ *
+ * board-specific init should be done by arch/.../.../board-XXX.c (maybe
+ * initializing banks together) rather than boot loaders; kexec() won't
+ * go through boot loaders.
+ *
+ * the gpio clock will be turned on when gpios are used, and you may also
+ * need to pay attention to PINMUX registers to be sure those pins are
+ * used as gpios, not with other peripherals.
+ *
+ * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
+ * and maybe for later updates, code may write GPIO(N).  These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
+ * may not support all the GPIOs in that range.
+ *
+ * GPIOs can also be on external chips, numbered after the ones built-in
+ * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
+ */
+#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
+
+/* Convert GPIO signal to GPIO pin number */
+#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
+
+struct davinci_gpio_controller {
+	struct gpio_chip	chip;
+	int			irq_base;
+	spinlock_t		lock;
+	void __iomem		*regs;
+	void __iomem		*set_data;
+	void __iomem		*clr_data;
+	void __iomem		*in_data;
+};
+
+/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
+ * with constant parameters; or in outlined code they execute at runtime.
+ *
+ * You'd access the controller directly when reading or writing more than
+ * one gpio value at a time, and to support wired logic where the value
+ * being driven by the cpu need not match the value read back.
+ *
+ * These are NOT part of the cross-platform GPIO interface
+ */
+static inline struct davinci_gpio_controller *
+__gpio_to_controller(unsigned gpio)
+{
+	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
+	int index = gpio / 32;
+
+	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
+		return NULL;
+
+	return ctlrs + index;
+}
+
+static inline u32 __gpio_mask(unsigned gpio)
+{
+	return 1 << (gpio % 32);
+}
+
+#endif	/* __DAVINCI_DAVINCI_GPIO_H */
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index fbece12..fbaae47 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -13,80 +13,10 @@
 #ifndef	__DAVINCI_GPIO_H
 #define	__DAVINCI_GPIO_H
 
-#include <linux/io.h>
-#include <linux/spinlock.h>
-
 #include <asm-generic/gpio.h>
 
-#include <mach/irqs.h>
-#include <mach/common.h>
-
-#define DAVINCI_GPIO_BASE 0x01C67000
-
-enum davinci_gpio_type {
-	GPIO_TYPE_DAVINCI = 0,
-	GPIO_TYPE_TNETV107X,
-};
-
-/*
- * basic gpio routines
- *
- * board-specific init should be done by arch/.../.../board-XXX.c (maybe
- * initializing banks together) rather than boot loaders; kexec() won't
- * go through boot loaders.
- *
- * the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX registers to be sure those pins are
- * used as gpios, not with other peripherals.
- *
- * On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1).  For documentation,
- * and maybe for later updates, code may write GPIO(N).  These may be
- * all 1.8V signals, all 3.3V ones, or a mix of the two.  A given chip
- * may not support all the GPIOs in that range.
- *
- * GPIOs can also be on external chips, numbered after the ones built-in
- * to the DaVinci chip.  For now, they won't be usable as IRQ sources.
- */
-#define	GPIO(X)		(X)		/* 0 <= X <= (DAVINCI_N_GPIO - 1) */
-
-/* Convert GPIO signal to GPIO pin number */
-#define GPIO_TO_PIN(bank, gpio)	(16 * (bank) + (gpio))
-
-struct davinci_gpio_controller {
-	struct gpio_chip	chip;
-	int			irq_base;
-	spinlock_t		lock;
-	void __iomem		*regs;
-	void __iomem		*set_data;
-	void __iomem		*clr_data;
-	void __iomem		*in_data;
-};
-
-/* The __gpio_to_controller() and __gpio_mask() functions inline to constants
- * with constant parameters; or in outlined code they execute at runtime.
- *
- * You'd access the controller directly when reading or writing more than
- * one gpio value at a time, and to support wired logic where the value
- * being driven by the cpu need not match the value read back.
- *
- * These are NOT part of the cross-platform GPIO interface
- */
-static inline struct davinci_gpio_controller *
-__gpio_to_controller(unsigned gpio)
-{
-	struct davinci_gpio_controller *ctlrs = davinci_soc_info.gpio_ctlrs;
-	int index = gpio / 32;
-
-	if (!ctlrs || index >= davinci_soc_info.gpio_ctlrs_num)
-		return NULL;
-
-	return ctlrs + index;
-}
-
-static inline u32 __gpio_mask(unsigned gpio)
-{
-	return 1 << (gpio % 32);
-}
+/* The inline versions use the static inlines in the driver header */
+#include "gpio-davinci.h"
 
 /*
  * The get/set/clear functions will inline when called with constant
@@ -147,11 +77,6 @@
 		return __gpio_cansleep(gpio);
 }
 
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
 static inline int irq_to_gpio(unsigned irq)
 {
 	/* don't support the reverse mapping */
diff --git a/arch/arm/mach-davinci/tnetv107x.c b/arch/arm/mach-davinci/tnetv107x.c
index 1b28fdd..409bb86 100644
--- a/arch/arm/mach-davinci/tnetv107x.c
+++ b/arch/arm/mach-davinci/tnetv107x.c
@@ -12,6 +12,7 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -27,9 +28,9 @@
 #include <mach/psc.h>
 #include <mach/cp_intc.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/hardware.h>
 #include <mach/tnetv107x.h>
+#include <mach/gpio-davinci.h>
 
 #include "clock.h"
 #include "mux.h"
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 83dce85..a9e0dae 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -158,7 +158,7 @@
 
 void __init dove_spi1_init(void)
 {
-	orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk());
+	orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk());
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-ep93xx/Kconfig b/arch/arm/mach-ep93xx/Kconfig
index 3a08b18..97a2493 100644
--- a/arch/arm/mach-ep93xx/Kconfig
+++ b/arch/arm/mach-ep93xx/Kconfig
@@ -182,6 +182,13 @@
 	  Say 'Y' here if you want your kernel to support the
 	  Technologic Systems TS-72xx board.
 
+config MACH_VISION_EP9307
+	bool "Support Vision Engraving Systems EP9307 SoM"
+	depends on EP93XX_SDCE0_PHYS_OFFSET
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Vision Engraving Systems EP9307 SoM.
+
 choice
 	prompt "Select a UART for early kernel messages"
 
diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile
index 3cedcf2..574209d9 100644
--- a/arch/arm/mach-ep93xx/Makefile
+++ b/arch/arm/mach-ep93xx/Makefile
@@ -15,3 +15,4 @@
 obj-$(CONFIG_MACH_SIM_ONE)	+= simone.o
 obj-$(CONFIG_MACH_SNAPPER_CL15)	+= snappercl15.o
 obj-$(CONFIG_MACH_TS72XX)	+= ts72xx.o
+obj-$(CONFIG_MACH_VISION_EP9307)+= vision_ep9307.o
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index c60f081..94c78bc 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -38,6 +38,7 @@
 #include <mach/fb.h>
 #include <mach/ep93xx_keypad.h>
 #include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 257175e..c63a5ec 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -37,6 +37,7 @@
 #include <mach/hardware.h>
 #include <mach/fb.h>
 #include <mach/ep93xx_spi.h>
+#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/include/mach/gpio.h b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
similarity index 87%
rename from arch/arm/mach-ep93xx/include/mach/gpio.h
rename to arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
index c57152c..8aff2ea 100644
--- a/arch/arm/mach-ep93xx/include/mach/gpio.h
+++ b/arch/arm/mach-ep93xx/include/mach/gpio-ep93xx.h
@@ -1,9 +1,7 @@
-/*
- * arch/arm/mach-ep93xx/include/mach/gpio.h
- */
+/* Include file for the EP93XX GPIO controller machine specifics */
 
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
+#ifndef __GPIO_EP93XX_H
+#define __GPIO_EP93XX_H
 
 /* GPIO port A.  */
 #define EP93XX_GPIO_LINE_A(x)		((x) + 0)
@@ -99,22 +97,4 @@
 /* maximum value for irq capable line identifiers */
 #define EP93XX_GPIO_LINE_MAX_IRQ	EP93XX_GPIO_LINE_F(7)
 
-/* new generic GPIO API - see Documentation/gpio.txt */
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-
-/*
- * Map GPIO A0..A7  (0..7)  to irq 64..71,
- *          B0..B7  (7..15) to irq 72..79, and
- *          F0..F7 (16..24) to irq 80..87.
- */
-#define gpio_to_irq(gpio)	\
-	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
-
-#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
-
-#endif
+#endif /* __GPIO_EP93XX_H */
diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c
index 238bc60..d6f286b 100644
--- a/arch/arm/mach-ep93xx/simone.c
+++ b/arch/arm/mach-ep93xx/simone.c
@@ -18,12 +18,12 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c
index 3bdf3a2..2b4d4b0 100644
--- a/arch/arm/mach-ep93xx/snappercl15.c
+++ b/arch/arm/mach-ep93xx/snappercl15.c
@@ -20,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/fb.h>
@@ -30,6 +29,7 @@
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/gpio-ep93xx.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
new file mode 100644
index 0000000..d96e4db
--- /dev/null
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -0,0 +1,364 @@
+/*
+ * arch/arm/mach-ep93xx/vision_ep9307.c
+ * Vision Engraving Systems EP9307 SoM support.
+ *
+ * Copyright (C) 2008-2011 Vision Engraving Systems
+ * H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/mmc_spi.h>
+#include <linux/mmc/host.h>
+
+#include <mach/hardware.h>
+#include <mach/fb.h>
+#include <mach/ep93xx_spi.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+#include <asm/mach/arch.h>
+
+/*************************************************************************
+ * Static I/O mappings for the FPGA
+ *************************************************************************/
+#define VISION_PHYS_BASE	EP93XX_CS7_PHYS_BASE
+#define VISION_VIRT_BASE	0xfebff000
+
+static struct map_desc vision_io_desc[] __initdata = {
+	{
+		.virtual	= VISION_VIRT_BASE,
+		.pfn		= __phys_to_pfn(VISION_PHYS_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init vision_map_io(void)
+{
+	ep93xx_map_io();
+
+	iotable_init(vision_io_desc, ARRAY_SIZE(vision_io_desc));
+}
+
+/*************************************************************************
+ * Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data vision_eth_data __initdata = {
+	.phy_id		= 1,
+};
+
+/*************************************************************************
+ * Framebuffer
+ *************************************************************************/
+#define VISION_LCD_ENABLE	EP93XX_GPIO_LINE_EGPIO1
+
+static int vision_lcd_setup(struct platform_device *pdev)
+{
+	int err;
+
+	err = gpio_request_one(VISION_LCD_ENABLE, GPIOF_INIT_HIGH,
+				dev_name(&pdev->dev));
+	if (err)
+		return err;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_RAS |
+				 EP93XX_SYSCON_DEVCFG_RASONP3 |
+				 EP93XX_SYSCON_DEVCFG_EXVC);
+
+	return 0;
+}
+
+static void vision_lcd_teardown(struct platform_device *pdev)
+{
+	gpio_free(VISION_LCD_ENABLE);
+}
+
+static void vision_lcd_blank(int blank_mode, struct fb_info *info)
+{
+	if (blank_mode)
+		gpio_set_value(VISION_LCD_ENABLE, 0);
+	else
+		gpio_set_value(VISION_LCD_ENABLE, 1);
+}
+
+static struct ep93xxfb_mach_info ep93xxfb_info __initdata = {
+	.num_modes	= EP93XXFB_USE_MODEDB,
+	.bpp		= 16,
+	.flags		= EP93XXFB_USE_SDCSN0 | EP93XXFB_PCLK_FALLING,
+	.setup		= vision_lcd_setup,
+	.teardown	= vision_lcd_teardown,
+	.blank		= vision_lcd_blank,
+};
+
+
+/*************************************************************************
+ * GPIO Expanders
+ *************************************************************************/
+#define PCA9539_74_GPIO_BASE	(EP93XX_GPIO_LINE_MAX + 1)
+#define PCA9539_75_GPIO_BASE	(PCA9539_74_GPIO_BASE + 16)
+#define PCA9539_76_GPIO_BASE	(PCA9539_75_GPIO_BASE + 16)
+#define PCA9539_77_GPIO_BASE	(PCA9539_76_GPIO_BASE + 16)
+
+static struct pca953x_platform_data pca953x_74_gpio_data = {
+	.gpio_base	= PCA9539_74_GPIO_BASE,
+	.irq_base	= EP93XX_BOARD_IRQ(0),
+};
+
+static struct pca953x_platform_data pca953x_75_gpio_data = {
+	.gpio_base	= PCA9539_75_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_76_gpio_data = {
+	.gpio_base	= PCA9539_76_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+static struct pca953x_platform_data pca953x_77_gpio_data = {
+	.gpio_base	= PCA9539_77_GPIO_BASE,
+	.irq_base	= -1,
+};
+
+/*************************************************************************
+ * I2C Bus
+ *************************************************************************/
+static struct i2c_gpio_platform_data vision_i2c_gpio_data __initdata = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+};
+
+static struct i2c_board_info vision_i2c_info[] __initdata = {
+	{
+		I2C_BOARD_INFO("isl1208", 0x6f),
+		.irq		= IRQ_EP93XX_EXT1,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x74),
+		.platform_data	= &pca953x_74_gpio_data,
+		.irq		= gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x75),
+		.platform_data	= &pca953x_75_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x76),
+		.platform_data	= &pca953x_76_gpio_data,
+	}, {
+		I2C_BOARD_INFO("pca9539", 0x77),
+		.platform_data	= &pca953x_77_gpio_data,
+	},
+};
+
+/*************************************************************************
+ * SPI Flash
+ *************************************************************************/
+#define VISION_SPI_FLASH_CS	EP93XX_GPIO_LINE_EGPIO7
+
+static struct mtd_partition vision_spi_flash_partitions[] = {
+	{
+		.name	= "SPI bootstrap",
+		.offset	= 0,
+		.size	= SZ_4K,
+	}, {
+		.name	= "Bootstrap config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= SZ_4K,
+	}, {
+		.name	= "System config",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct flash_platform_data vision_spi_flash_data = {
+	.name		= "SPI Flash",
+	.parts		= vision_spi_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(vision_spi_flash_partitions),
+};
+
+static int vision_spi_flash_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_FLASH_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_flash_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_FLASH_CS);
+}
+
+static void vision_spi_flash_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_FLASH_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_flash_hw = {
+	.setup		= vision_spi_flash_hw_setup,
+	.cleanup	= vision_spi_flash_hw_cleanup,
+	.cs_control	= vision_spi_flash_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI SD/MMC host
+ *************************************************************************/
+#define VISION_SPI_MMC_CS	EP93XX_GPIO_LINE_G(2)
+#define VISION_SPI_MMC_WP	EP93XX_GPIO_LINE_F(0)
+#define VISION_SPI_MMC_CD	EP93XX_GPIO_LINE_EGPIO15
+
+static struct gpio vision_spi_mmc_gpios[] = {
+	{ VISION_SPI_MMC_WP, GPIOF_DIR_IN, "mmc_spi:wp" },
+	{ VISION_SPI_MMC_CD, GPIOF_DIR_IN, "mmc_spi:cd" },
+};
+
+static int vision_spi_mmc_init(struct device *pdev,
+			irqreturn_t (*func)(int, void *), void *pdata)
+{
+	int err;
+
+	err = gpio_request_array(vision_spi_mmc_gpios,
+				 ARRAY_SIZE(vision_spi_mmc_gpios));
+	if (err)
+		return err;
+
+	err = gpio_set_debounce(VISION_SPI_MMC_CD, 1);
+	if (err)
+		goto exit_err;
+
+	err = request_irq(gpio_to_irq(VISION_SPI_MMC_CD), func,
+			IRQ_TYPE_EDGE_BOTH, "mmc_spi:cd", pdata);
+	if (err)
+		goto exit_err;
+
+	return 0;
+
+exit_err:
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+	return err;
+
+}
+
+static void vision_spi_mmc_exit(struct device *pdev, void *pdata)
+{
+	free_irq(gpio_to_irq(VISION_SPI_MMC_CD), pdata);
+	gpio_free_array(vision_spi_mmc_gpios, ARRAY_SIZE(vision_spi_mmc_gpios));
+}
+
+static int vision_spi_mmc_get_ro(struct device *pdev)
+{
+	return !!gpio_get_value(VISION_SPI_MMC_WP);
+}
+
+static int vision_spi_mmc_get_cd(struct device *pdev)
+{
+	return !gpio_get_value(VISION_SPI_MMC_CD);
+}
+
+static struct mmc_spi_platform_data vision_spi_mmc_data = {
+	.init		= vision_spi_mmc_init,
+	.exit		= vision_spi_mmc_exit,
+	.get_ro		= vision_spi_mmc_get_ro,
+	.get_cd		= vision_spi_mmc_get_cd,
+	.detect_delay	= 100,
+	.powerup_msecs	= 100,
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+};
+
+static int vision_spi_mmc_hw_setup(struct spi_device *spi)
+{
+	return gpio_request_one(VISION_SPI_MMC_CS, GPIOF_INIT_HIGH,
+				spi->modalias);
+}
+
+static void vision_spi_mmc_hw_cleanup(struct spi_device *spi)
+{
+	gpio_free(VISION_SPI_MMC_CS);
+}
+
+static void vision_spi_mmc_hw_cs_control(struct spi_device *spi, int value)
+{
+	gpio_set_value(VISION_SPI_MMC_CS, value);
+}
+
+static struct ep93xx_spi_chip_ops vision_spi_mmc_hw = {
+	.setup		= vision_spi_mmc_hw_setup,
+	.cleanup	= vision_spi_mmc_hw_cleanup,
+	.cs_control	= vision_spi_mmc_hw_cs_control,
+};
+
+/*************************************************************************
+ * SPI Bus
+ *************************************************************************/
+static struct spi_board_info vision_spi_board_info[] __initdata = {
+	{
+		.modalias		= "sst25l",
+		.platform_data		= &vision_spi_flash_data,
+		.controller_data	= &vision_spi_flash_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 0,
+		.mode			= SPI_MODE_3,
+	}, {
+		.modalias		= "mmc_spi",
+		.platform_data		= &vision_spi_mmc_data,
+		.controller_data	= &vision_spi_mmc_hw,
+		.max_speed_hz		= 20000000,
+		.bus_num		= 0,
+		.chip_select		= 1,
+		.mode			= SPI_MODE_3,
+	},
+};
+
+static struct ep93xx_spi_info vision_spi_master __initdata = {
+	.num_chipselect		= ARRAY_SIZE(vision_spi_board_info),
+};
+
+/*************************************************************************
+ * Machine Initialization
+ *************************************************************************/
+static void __init vision_init_machine(void)
+{
+	ep93xx_init_devices();
+	ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_64M);
+	ep93xx_register_eth(&vision_eth_data, 1);
+	ep93xx_register_fb(&ep93xxfb_info);
+	ep93xx_register_pwm(1, 0);
+
+	/*
+	 * Request the gpio expander's interrupt gpio line now to prevent
+	 * the kernel from doing a WARN in gpiolib:gpio_ensure_requested().
+	 */
+	if (gpio_request_one(EP93XX_GPIO_LINE_F(7), GPIOF_DIR_IN,
+				"pca9539:74"))
+		pr_warn("cannot request interrupt gpio for pca9539:74\n");
+
+	ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
+				ARRAY_SIZE(vision_i2c_info));
+	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
+				ARRAY_SIZE(vision_spi_board_info));
+}
+
+MACHINE_START(VISION_EP9307, "Vision Engraving Systems EP9307")
+	/* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+	.atag_offset	= 0x100,
+	.map_io		= vision_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= vision_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
index 0c77ab9..fec2385 100644
--- a/arch/arm/mach-exynos4/Kconfig
+++ b/arch/arm/mach-exynos4/Kconfig
@@ -15,6 +15,16 @@
 	help
 	  Enable EXYNOS4210 CPU support
 
+config SOC_EXYNOS4212
+	bool
+	help
+	  Enable EXYNOS4212 SoC support
+
+config SOC_EXYNOS4412
+	bool
+	help
+	  Enable EXYNOS4412 SoC support
+
 config EXYNOS4_MCT
 	bool
 	default y
@@ -111,24 +121,11 @@
 
 menu "EXYNOS4 Machines"
 
+comment "EXYNOS4210 Boards"
+
 config MACH_SMDKC210
 	bool "SMDKC210"
-	select CPU_EXYNOS4210
-	select S5P_DEV_FIMD0
-	select S3C_DEV_RTC
-	select S3C_DEV_WDT
-	select S3C_DEV_I2C1
-	select S3C_DEV_HSMMC
-	select S3C_DEV_HSMMC1
-	select S3C_DEV_HSMMC2
-	select S3C_DEV_HSMMC3
-	select SAMSUNG_DEV_PWM
-	select SAMSUNG_DEV_BACKLIGHT
-	select EXYNOS4_DEV_PD
-	select EXYNOS4_DEV_SYSMMU
-	select EXYNOS4_SETUP_FIMD0
-	select EXYNOS4_SETUP_I2C1
-	select EXYNOS4_SETUP_SDHCI
+	select MACH_SMDKV310
 	help
 	  Machine support for Samsung SMDKC210
 
@@ -218,6 +215,48 @@
 	help
 	  Machine support for Samsung Mobile NURI Board.
 
+config MACH_ORIGEN
+	bool "ORIGEN"
+	select CPU_EXYNOS4210
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select S3C_DEV_HSMMC2
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for ORIGEN based on Samsung EXYNOS4210
+
+comment "EXYNOS4212 Boards"
+
+config MACH_SMDK4212
+	bool "SMDK4212"
+	select SOC_EXYNOS4212
+	select S3C_DEV_HSMMC2
+	select S3C_DEV_HSMMC3
+	select S3C_DEV_I2C1
+	select S3C_DEV_I2C3
+	select S3C_DEV_I2C7
+	select S3C_DEV_RTC
+	select S3C_DEV_WDT
+	select SAMSUNG_DEV_BACKLIGHT
+	select SAMSUNG_DEV_KEYPAD
+	select SAMSUNG_DEV_PWM
+	select EXYNOS4_SETUP_I2C1
+	select EXYNOS4_SETUP_I2C3
+	select EXYNOS4_SETUP_I2C7
+	select EXYNOS4_SETUP_KEYPAD
+	select EXYNOS4_SETUP_SDHCI
+	help
+	  Machine support for Samsung SMDK4212
+
+comment "EXYNOS4412 Boards"
+
+config MACH_SMDK4412
+	bool "SMDK4412"
+	select SOC_EXYNOS4412
+	select MACH_SMDK4212
+	help
+	  Machine support for Samsung SMDK4412
+
 endmenu
 
 comment "Configuration for HSMMC bus width"
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index b7fe1d7..c9b2e1f 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -12,8 +12,10 @@
 
 # Core support for EXYNOS4 system
 
-obj-$(CONFIG_CPU_EXYNOS4210)	+= cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= cpu.o init.o clock.o irq-combiner.o
+obj-$(CONFIG_ARCH_EXYNOS4)	+= setup-i2c0.o irq-eint.o dma.o pmu.o
+obj-$(CONFIG_CPU_EXYNOS4210)	+= clock-exynos4210.o
+obj-$(CONFIG_SOC_EXYNOS4212)	+= clock-exynos4212.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o
 obj-$(CONFIG_CPU_IDLE)		+= cpuidle.o
 
@@ -25,11 +27,15 @@
 
 # machine support
 
-obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkc210.o
+obj-$(CONFIG_MACH_SMDKC210)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_SMDKV310)		+= mach-smdkv310.o
 obj-$(CONFIG_MACH_ARMLEX4210)		+= mach-armlex4210.o
 obj-$(CONFIG_MACH_UNIVERSAL_C210)	+= mach-universal_c210.o
 obj-$(CONFIG_MACH_NURI)			+= mach-nuri.o
+obj-$(CONFIG_MACH_ORIGEN)		+= mach-origen.o
+
+obj-$(CONFIG_MACH_SMDK4212)		+= mach-smdk4x12.o
+obj-$(CONFIG_MACH_SMDK4412)		+= mach-smdk4x12.o
 
 # device support
 
diff --git a/arch/arm/mach-exynos4/clock-exynos4210.c b/arch/arm/mach-exynos4/clock-exynos4210.c
new file mode 100644
index 0000000..b9d5ef6
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4210.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4210.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4210 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4210_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKSRC_LCD1),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_LCD1),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4210),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
+};
+
+static struct clksrc_clk *sysclks[] = {
+	/* nothing here yet */
+};
+
+static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
+{
+	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
+}
+
+static struct clksrc_clk clksrcs[] = {
+	{
+		.clk		= {
+			.name		= "sclk_sata",
+			.id		= -1,
+			.enable		= exynos4_clksrc_mask_fsys_ctrl,
+			.ctrlbit	= (1 << 24),
+		},
+		.sources = &clkset_mout_corebus,
+		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
+		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
+	}, {
+		.clk		= {
+			.name		= "sclk_fimd",
+			.devname	= "exynos4-fb.1",
+			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
+			.ctrlbit	= (1 << 0),
+		},
+		.sources = &clkset_group,
+		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
+		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
+	},
+};
+
+static struct clk init_clocks_off[] = {
+	{
+		.name		= "sataphy",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 3),
+	}, {
+		.name		= "sata",
+		.id		= -1,
+		.parent		= &clk_aclk_133.clk,
+		.enable		= exynos4_clk_ip_fsys_ctrl,
+		.ctrlbit	= (1 << 10),
+	}, {
+		.name		= "fimd",
+		.devname	= "exynos4-fb.1",
+		.enable		= exynos4_clk_ip_lcd1_ctrl,
+		.ctrlbit	= (1 << 0),
+	},
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4210_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+
+	return 0;
+}
+
+static void exynos4210_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4210_clock_save, ARRAY_SIZE(exynos4210_clock_save));
+}
+
+#else
+#define exynos4210_clock_suspend NULL
+#define exynos4210_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4210_clock_syscore_ops = {
+	.suspend	= exynos4210_clock_suspend,
+	.resume		= exynos4210_clock_resume,
+};
+
+void __init exynos4210_register_clocks(void)
+{
+	int ptr;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_CPU;
+	clk_mout_mpll.reg_src.shift = 8;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4210_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock-exynos4212.c b/arch/arm/mach-exynos4/clock-exynos4212.c
new file mode 100644
index 0000000..77d5dec
--- /dev/null
+++ b/arch/arm/mach-exynos4/clock-exynos4212.c
@@ -0,0 +1,118 @@
+/*
+ * linux/arch/arm/mach-exynos4/clock-exynos4212.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * EXYNOS4212 - Clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/exynos4-clock.h>
+
+static struct sleep_save exynos4212_clock_save[] = {
+	SAVE_ITEM(S5P_CLKSRC_IMAGE),
+	SAVE_ITEM(S5P_CLKDIV_IMAGE),
+	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
+};
+
+static struct clk *clk_src_mpll_user_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources clk_src_mpll_user = {
+	.sources	= clk_src_mpll_user_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk clk_mout_mpll_user = {
+	.clk = {
+		.name		= "mout_mpll_user",
+	},
+	.sources	= &clk_src_mpll_user,
+	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk *sysclks[] = {
+	&clk_mout_mpll_user,
+};
+
+static struct clksrc_clk clksrcs[] = {
+	/* nothing here yet */
+};
+
+static struct clk init_clocks_off[] = {
+	/* nothing here yet */
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int exynos4212_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+
+	return 0;
+}
+
+static void exynos4212_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4212_clock_save, ARRAY_SIZE(exynos4212_clock_save));
+}
+
+#else
+#define exynos4212_clock_suspend NULL
+#define exynos4212_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4212_clock_syscore_ops = {
+	.suspend	= exynos4212_clock_suspend,
+	.resume		= exynos4212_clock_resume,
+};
+
+void __init exynos4212_register_clocks(void)
+{
+	int ptr;
+
+	/* usbphy1 is removed */
+	clkset_group_list[4] = NULL;
+
+	/* mout_mpll_user is used */
+	clkset_group_list[6] = &clk_mout_mpll_user.clk;
+	clkset_aclk_top_list[0] = &clk_mout_mpll_user.clk;
+
+	clk_mout_mpll.reg_src.reg = S5P_CLKSRC_DMC;
+	clk_mout_mpll.reg_src.shift = 12;
+	clk_mout_mpll.reg_src.size = 1;
+
+	for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++)
+		s3c_register_clksrc(sysclks[ptr], 1);
+
+	s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs));
+
+	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
+
+	register_syscore_ops(&exynos4212_clock_syscore_ops);
+}
diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c
index 1561b03..0d59be3 100644
--- a/arch/arm/mach-exynos4/clock.c
+++ b/arch/arm/mach-exynos4/clock.c
@@ -13,6 +13,7 @@
 #include <linux/kernel.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/syscore_ops.h>
 
 #include <plat/cpu-freq.h>
 #include <plat/clock.h>
@@ -20,26 +21,93 @@
 #include <plat/pll.h>
 #include <plat/s5p-clock.h>
 #include <plat/clock-clksrc.h>
+#include <plat/exynos4.h>
+#include <plat/pm.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/sysmmu.h>
+#include <mach/exynos4-clock.h>
 
-static struct clk clk_sclk_hdmi27m = {
+static struct sleep_save exynos4_clock_save[] = {
+	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
+	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
+	SAVE_ITEM(S5P_CLKSRC_TOP0),
+	SAVE_ITEM(S5P_CLKSRC_TOP1),
+	SAVE_ITEM(S5P_CLKSRC_CAM),
+	SAVE_ITEM(S5P_CLKSRC_TV),
+	SAVE_ITEM(S5P_CLKSRC_MFC),
+	SAVE_ITEM(S5P_CLKSRC_G3D),
+	SAVE_ITEM(S5P_CLKSRC_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_CAM),
+	SAVE_ITEM(S5P_CLKDIV_TV),
+	SAVE_ITEM(S5P_CLKDIV_MFC),
+	SAVE_ITEM(S5P_CLKDIV_G3D),
+	SAVE_ITEM(S5P_CLKDIV_LCD0),
+	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
+	SAVE_ITEM(S5P_CLKDIV_FSYS0),
+	SAVE_ITEM(S5P_CLKDIV_FSYS1),
+	SAVE_ITEM(S5P_CLKDIV_FSYS2),
+	SAVE_ITEM(S5P_CLKDIV_FSYS3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL0),
+	SAVE_ITEM(S5P_CLKDIV_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV_PERIL2),
+	SAVE_ITEM(S5P_CLKDIV_PERIL3),
+	SAVE_ITEM(S5P_CLKDIV_PERIL4),
+	SAVE_ITEM(S5P_CLKDIV_PERIL5),
+	SAVE_ITEM(S5P_CLKDIV_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
+	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
+	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
+	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
+	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
+	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
+	SAVE_ITEM(S5P_CLKDIV2_RATIO),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
+	SAVE_ITEM(S5P_CLKGATE_IP_TV),
+	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
+	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
+	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
+	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
+	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
+	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
+	SAVE_ITEM(S5P_CLKGATE_BLOCK),
+	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
+	SAVE_ITEM(S5P_CLKSRC_DMC),
+	SAVE_ITEM(S5P_CLKDIV_DMC0),
+	SAVE_ITEM(S5P_CLKDIV_DMC1),
+	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
+	SAVE_ITEM(S5P_CLKSRC_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU),
+	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
+	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
+	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
+};
+
+struct clk clk_sclk_hdmi27m = {
 	.name		= "sclk_hdmi27m",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_hdmiphy = {
+struct clk clk_sclk_hdmiphy = {
 	.name		= "sclk_hdmiphy",
 };
 
-static struct clk clk_sclk_usbphy0 = {
+struct clk clk_sclk_usbphy0 = {
 	.name		= "sclk_usbphy0",
 	.rate		= 27000000,
 };
 
-static struct clk clk_sclk_usbphy1 = {
+struct clk clk_sclk_usbphy1 = {
 	.name		= "sclk_usbphy1",
 };
 
@@ -58,12 +126,7 @@
 	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD0, clk, enable);
 }
 
-static int exynos4_clksrc_mask_lcd1_ctrl(struct clk *clk, int enable)
-{
-	return s5p_gatectrl(S5P_CLKSRC_MASK_LCD1, clk, enable);
-}
-
-static int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKSRC_MASK_FSYS, clk, enable);
 }
@@ -103,12 +166,12 @@
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD0, clk, enable);
 }
 
-static int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_LCD1, clk, enable);
 }
 
-static int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable)
 {
 	return s5p_gatectrl(S5P_CLKGATE_IP_FSYS, clk, enable);
 }
@@ -133,7 +196,7 @@
 	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 },
 };
 
-static struct clksrc_clk clk_sclk_apll = {
+struct clksrc_clk clk_sclk_apll = {
 	.clk	= {
 		.name		= "sclk_apll",
 		.parent		= &clk_mout_apll.clk,
@@ -141,7 +204,7 @@
 	.reg_div	= { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 },
 };
 
-static struct clksrc_clk clk_mout_epll = {
+struct clksrc_clk clk_mout_epll = {
 	.clk	= {
 		.name		= "mout_epll",
 	},
@@ -149,12 +212,13 @@
 	.reg_src	= { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 },
 };
 
-static struct clksrc_clk clk_mout_mpll = {
+struct clksrc_clk clk_mout_mpll = {
 	.clk = {
 		.name		= "mout_mpll",
 	},
 	.sources	= &clk_src_mpll,
-	.reg_src	= { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 },
+
+	/* reg_src will be added in each SoCs' clock */
 };
 
 static struct clk *clkset_moutcore_list[] = {
@@ -224,12 +288,12 @@
 
 /* Core list of CMU_CORE side */
 
-static struct clk *clkset_corebus_list[] = {
+struct clk *clkset_corebus_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_mout_corebus = {
+struct clksrc_sources clkset_mout_corebus = {
 	.sources	= clkset_corebus_list,
 	.nr_sources	= ARRAY_SIZE(clkset_corebus_list),
 };
@@ -284,12 +348,12 @@
 
 /* Core list of CMU_TOP side */
 
-static struct clk *clkset_aclk_top_list[] = {
+struct clk *clkset_aclk_top_list[] = {
 	[0] = &clk_mout_mpll.clk,
 	[1] = &clk_sclk_apll.clk,
 };
 
-static struct clksrc_sources clkset_aclk = {
+struct clksrc_sources clkset_aclk = {
 	.sources	= clkset_aclk_top_list,
 	.nr_sources	= ARRAY_SIZE(clkset_aclk_top_list),
 };
@@ -321,7 +385,7 @@
 	.reg_div	= { .reg = S5P_CLKDIV_TOP, .shift = 8, .size = 3 },
 };
 
-static struct clksrc_clk clk_aclk_133 = {
+struct clksrc_clk clk_aclk_133 = {
 	.clk	= {
 		.name		= "aclk_133",
 	},
@@ -360,7 +424,7 @@
 	.nr_sources	= ARRAY_SIZE(clkset_sclk_vpll_list),
 };
 
-static struct clksrc_clk clk_sclk_vpll = {
+struct clksrc_clk clk_sclk_vpll = {
 	.clk	= {
 		.name		= "sclk_vpll",
 	},
@@ -410,16 +474,6 @@
 		.enable		= exynos4_clk_ip_lcd0_ctrl,
 		.ctrlbit	= (1 << 0),
 	}, {
-		.name		= "fimd",
-		.devname	= "exynos4-fb.1",
-		.enable		= exynos4_clk_ip_lcd1_ctrl,
-		.ctrlbit	= (1 << 0),
-	}, {
-		.name		= "sataphy",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 3),
-	}, {
 		.name		= "hsmmc",
 		.devname	= "s3c-sdhci.0",
 		.parent		= &clk_aclk_133.clk,
@@ -449,11 +503,6 @@
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 9),
 	}, {
-		.name		= "sata",
-		.parent		= &clk_aclk_133.clk,
-		.enable		= exynos4_clk_ip_fsys_ctrl,
-		.ctrlbit	= (1 << 10),
-	}, {
 		.name		= "pdma",
 		.devname	= "s3c-pl330.0",
 		.enable		= exynos4_clk_ip_fsys_ctrl,
@@ -673,7 +722,7 @@
 	}
 };
 
-static struct clk *clkset_group_list[] = {
+struct clk *clkset_group_list[] = {
 	[0] = &clk_ext_xtal_mux,
 	[1] = &clk_xusbxti,
 	[2] = &clk_sclk_hdmi27m,
@@ -685,7 +734,7 @@
 	[8] = &clk_sclk_vpll.clk,
 };
 
-static struct clksrc_sources clkset_group = {
+struct clksrc_sources clkset_group = {
 	.sources	= clkset_group_list,
 	.nr_sources	= ARRAY_SIZE(clkset_group_list),
 };
@@ -899,8 +948,7 @@
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 16),
 		},
@@ -909,8 +957,7 @@
 		.reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "exynos4-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= exynos4_clksrc_mask_cam_ctrl,
 			.ctrlbit	= (1 << 20),
 		},
@@ -969,25 +1016,6 @@
 		.reg_div = { .reg = S5P_CLKDIV_LCD0, .shift = 0, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_fimd",
-			.devname	= "exynos4-fb.1",
-			.enable		= exynos4_clksrc_mask_lcd1_ctrl,
-			.ctrlbit	= (1 << 0),
-		},
-		.sources = &clkset_group,
-		.reg_src = { .reg = S5P_CLKSRC_LCD1, .shift = 0, .size = 4 },
-		.reg_div = { .reg = S5P_CLKDIV_LCD1, .shift = 0, .size = 4 },
-	}, {
-		.clk		= {
-			.name		= "sclk_sata",
-			.enable		= exynos4_clksrc_mask_fsys_ctrl,
-			.ctrlbit	= (1 << 24),
-		},
-		.sources = &clkset_mout_corebus,
-		.reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 24, .size = 1 },
-		.reg_div = { .reg = S5P_CLKDIV_FSYS0, .shift = 20, .size = 4 },
-	}, {
-		.clk		= {
 			.name		= "sclk_spi",
 			.devname	= "s3c64xx-spi.0",
 			.enable		= exynos4_clksrc_mask_peril1_ctrl,
@@ -1116,7 +1144,13 @@
 
 static unsigned long exynos4_fout_apll_get_rate(struct clk *clk)
 {
-	return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0), pll_4508);
+	if (soc_is_exynos4210())
+		return s5p_get_pll45xx(xtal_rate, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		return s5p_get_pll35xx(xtal_rate, __raw_readl(S5P_APLL_CON0));
+	else
+		return 0;
 }
 
 static struct clk_ops exynos4_fout_apll_ops = {
@@ -1126,10 +1160,10 @@
 void __init_or_cpufreq exynos4_setup_clocks(void)
 {
 	struct clk *xtal_clk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long epll;
-	unsigned long vpll;
+	unsigned long apll = 0;
+	unsigned long mpll = 0;
+	unsigned long epll = 0;
+	unsigned long vpll = 0;
 	unsigned long vpllsrc;
 	unsigned long xtal;
 	unsigned long armclk;
@@ -1153,14 +1187,29 @@
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0), pll_4508);
-	mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0), pll_4508);
-	epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
-				__raw_readl(S5P_EPLL_CON1), pll_4600);
+	if (soc_is_exynos4210()) {
+		apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON0),
+					pll_4508);
+		mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON0),
+					pll_4508);
+		epll = s5p_get_pll46xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1), pll_4600);
 
-	vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
-	vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
-				__raw_readl(S5P_VPLL_CON1), pll_4650);
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1), pll_4650c);
+	} else if (soc_is_exynos4212() || soc_is_exynos4412()) {
+		apll = s5p_get_pll35xx(xtal, __raw_readl(S5P_APLL_CON0));
+		mpll = s5p_get_pll35xx(xtal, __raw_readl(S5P_MPLL_CON0));
+		epll = s5p_get_pll36xx(xtal, __raw_readl(S5P_EPLL_CON0),
+					__raw_readl(S5P_EPLL_CON1));
+
+		vpllsrc = clk_get_rate(&clk_vpllsrc.clk);
+		vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(S5P_VPLL_CON0),
+					__raw_readl(S5P_VPLL_CON1));
+	} else {
+		/* nothing */
+	}
 
 	clk_fout_apll.ops = &exynos4_fout_apll_ops;
 	clk_fout_mpll.rate = mpll;
@@ -1195,6 +1244,28 @@
 	/* Nothing here yet */
 };
 
+#ifdef CONFIG_PM_SLEEP
+static int exynos4_clock_suspend(void)
+{
+	s3c_pm_do_save(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+	return 0;
+}
+
+static void exynos4_clock_resume(void)
+{
+	s3c_pm_do_restore_core(exynos4_clock_save, ARRAY_SIZE(exynos4_clock_save));
+}
+
+#else
+#define exynos4_clock_suspend NULL
+#define exynos4_clock_resume NULL
+#endif
+
+struct syscore_ops exynos4_clock_syscore_ops = {
+	.suspend	= exynos4_clock_suspend,
+	.resume		= exynos4_clock_resume,
+};
+
 void __init exynos4_register_clocks(void)
 {
 	int ptr;
@@ -1210,5 +1281,6 @@
 	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
 
+	register_syscore_ops(&exynos4_clock_syscore_ops);
 	s3c_pwmclk_init();
 }
diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c
index 746d6fc..a348434 100644
--- a/arch/arm/mach-exynos4/cpu.c
+++ b/arch/arm/mach-exynos4/cpu.c
@@ -32,6 +32,8 @@
 #include <mach/regs-irq.h>
 #include <mach/regs-pmu.h>
 
+unsigned int gic_bank_offset __read_mostly;
+
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
 extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@@ -44,11 +46,6 @@
 		.length		= SZ_4K,
 		.type	 	= MT_DEVICE,
 	}, {
-		.virtual	= (unsigned long)S5P_VA_SYSRAM,
-		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM),
-		.length		= SZ_4K,
-		.type		= MT_DEVICE,
-	}, {
 		.virtual	= (unsigned long)S5P_VA_CMU,
 		.pfn		= __phys_to_pfn(EXYNOS4_PA_CMU),
 		.length		= SZ_128K,
@@ -121,6 +118,24 @@
 	},
 };
 
+static struct map_desc exynos4_iodesc0[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM0),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
+static struct map_desc exynos4_iodesc1[] __initdata = {
+	{
+		.virtual	= (unsigned long)S5P_VA_SYSRAM,
+		.pfn		= __phys_to_pfn(EXYNOS4_PA_SYSRAM1),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	},
+};
+
 static void exynos4_idle(void)
 {
 	if (!need_resched())
@@ -143,6 +158,11 @@
 {
 	iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
 
+	if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
+		iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
+	else
+		iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
+
 	/* initialize device information early */
 	exynos4_default_sdhci0();
 	exynos4_default_sdhci1();
@@ -170,24 +190,37 @@
 
 	s3c24xx_register_baseclocks(xtal);
 	s5p_register_clocks(xtal);
+
+	if (soc_is_exynos4210())
+		exynos4210_register_clocks();
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		exynos4212_register_clocks();
+
 	exynos4_register_clocks();
 	exynos4_setup_clocks();
 }
 
-static void exynos4_gic_irq_eoi(struct irq_data *d)
+static void exynos4_gic_irq_fix_base(struct irq_data *d)
 {
 	struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d);
 
 	gic_data->cpu_base = S5P_VA_GIC_CPU +
-			    (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+			    (gic_bank_offset * smp_processor_id());
+
+	gic_data->dist_base = S5P_VA_GIC_DIST +
+			    (gic_bank_offset * smp_processor_id());
 }
 
 void __init exynos4_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
-	gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi;
+	gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
+
+	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+	gic_arch_extn.irq_eoi = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_unmask = exynos4_gic_irq_fix_base;
+	gic_arch_extn.irq_mask = exynos4_gic_irq_fix_base;
 
 	for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
 
@@ -223,7 +256,11 @@
 {
 	/* TAG, Data Latency Control: 2cycle */
 	__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
-	__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+
+	if (soc_is_exynos4210())
+		__raw_writel(0x110, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
+	else if (soc_is_exynos4212() || soc_is_exynos4412())
+		__raw_writel(0x120, S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
 
 	/* L2X0 Prefetch Control */
 	__raw_writel(0x30000007, S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S
index 006a4f4..f5e9fd8 100644
--- a/arch/arm/mach-exynos4/include/mach/entry-macro.S
+++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S
@@ -17,12 +17,25 @@
 		.endm
 
 		.macro  get_irqnr_preamble, base, tmp
-		ldr	\base, =gic_cpu_base_addr
+		mov	\tmp, #0
+
+		mrc	p15, 0, \base, c0, c0, 5
+		and	\base, \base, #3
+		cmp	\base, #0
+		beq	1f
+
+		ldr	\tmp, =gic_bank_offset
+		ldr	\tmp, [\tmp]
+		cmp	\base, #1
+		beq	1f
+
+		cmp	\base, #2
+		addeq	\tmp, \tmp, \tmp
+		addne	\tmp, \tmp, \tmp, LSL #1
+
+1:		ldr	\base, =gic_cpu_base_addr
 		ldr	\base, [\base]
-		mrc     p15, 0, \tmp, c0, c0, 5
-		and     \tmp, \tmp, #3
-		cmp     \tmp, #1
-		addeq   \base, \base, #EXYNOS4_GIC_BANK_OFFSET
+		add	\base, \base, \tmp
 		.endm
 
 		.macro  arch_ret_to_user, tmp1, tmp2
diff --git a/arch/arm/mach-exynos4/include/mach/exynos4-clock.h b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
new file mode 100644
index 0000000..a07fcbf
--- /dev/null
+++ b/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
@@ -0,0 +1,43 @@
+/*
+ * linux/arch/arm/mach-exynos4/include/mach/exynos4-clock.h
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Header file for exynos4 clock support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_CLOCK_H
+#define __ASM_ARCH_CLOCK_H __FILE__
+
+#include <linux/clk.h>
+
+extern struct clk clk_sclk_hdmi27m;
+extern struct clk clk_sclk_usbphy0;
+extern struct clk clk_sclk_usbphy1;
+extern struct clk clk_sclk_hdmiphy;
+
+extern struct clksrc_clk clk_sclk_apll;
+extern struct clksrc_clk clk_mout_mpll;
+extern struct clksrc_clk clk_aclk_133;
+extern struct clksrc_clk clk_mout_epll;
+extern struct clksrc_clk clk_sclk_vpll;
+
+extern struct clk *clkset_corebus_list[];
+extern struct clksrc_sources clkset_mout_corebus;
+
+extern struct clk *clkset_aclk_top_list[];
+extern struct clksrc_sources clkset_aclk;
+
+extern struct clk *clkset_group_list[];
+extern struct clksrc_sources clkset_group;
+
+extern int exynos4_clksrc_mask_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_fsys_ctrl(struct clk *clk, int enable);
+extern int exynos4_clk_ip_lcd1_ctrl(struct clk *clk, int enable);
+
+#endif /* __ASM_ARCH_CLOCK_H */
diff --git a/arch/arm/mach-exynos4/include/mach/gpio.h b/arch/arm/mach-exynos4/include/mach/gpio.h
index be9266b..80523ca 100644
--- a/arch/arm/mach-exynos4/include/mach/gpio.h
+++ b/arch/arm/mach-exynos4/include/mach/gpio.h
@@ -13,11 +13,6 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H __FILE__
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* Practically, GPIO banks up to GPZ are the configurable gpio banks */
 
 /* GPIO bank sizes */
@@ -151,6 +146,4 @@
 #define ARCH_NR_GPIOS		(EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h
index f8952f8..2d3f6bc 100644
--- a/arch/arm/mach-exynos4/include/mach/irqs.h
+++ b/arch/arm/mach-exynos4/include/mach/irqs.h
@@ -19,6 +19,8 @@
 
 #define IRQ_PPI(x)		S5P_IRQ(x+16)
 
+#define IRQ_MCT_LOCALTIMER	IRQ_PPI(12)
+
 /* SPI: Shared Peripheral Interrupt */
 
 #define IRQ_SPI(x)		S5P_IRQ(x+32)
diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h
index d32296d..9f97eb8 100644
--- a/arch/arm/mach-exynos4/include/mach/map.h
+++ b/arch/arm/mach-exynos4/include/mach/map.h
@@ -23,7 +23,8 @@
 
 #include <plat/map-s5p.h>
 
-#define EXYNOS4_PA_SYSRAM		0x02020000
+#define EXYNOS4_PA_SYSRAM0		0x02025000
+#define EXYNOS4_PA_SYSRAM1		0x02020000
 
 #define EXYNOS4_PA_FIMC0		0x11800000
 #define EXYNOS4_PA_FIMC1		0x11810000
@@ -61,7 +62,6 @@
 
 #define EXYNOS4_PA_GIC_CPU		0x10480000
 #define EXYNOS4_PA_GIC_DIST		0x10490000
-#define EXYNOS4_GIC_BANK_OFFSET		0x8000
 
 #define EXYNOS4_PA_COREPERI		0x10500000
 #define EXYNOS4_PA_TWD			0x10500600
diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h
index d493fdb..6c37ebe 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h
@@ -13,6 +13,7 @@
 #ifndef __ASM_ARCH_REGS_CLOCK_H
 #define __ASM_ARCH_REGS_CLOCK_H __FILE__
 
+#include <plat/cpu.h>
 #include <mach/map.h>
 
 #define S5P_CLKREG(x)			(S5P_VA_CMU + (x))
@@ -41,12 +42,20 @@
 #define S5P_CLKSRC_G3D			S5P_CLKREG(0x0C22C)
 #define S5P_CLKSRC_IMAGE		S5P_CLKREG(0x0C230)
 #define S5P_CLKSRC_LCD0			S5P_CLKREG(0x0C234)
-#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
 #define S5P_CLKSRC_MAUDIO		S5P_CLKREG(0x0C23C)
 #define S5P_CLKSRC_FSYS			S5P_CLKREG(0x0C240)
 #define S5P_CLKSRC_PERIL0		S5P_CLKREG(0x0C250)
 #define S5P_CLKSRC_PERIL1		S5P_CLKREG(0x0C254)
 
+#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
+#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
+#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
+#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
+#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
+#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
+#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
+#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
+
 #define S5P_CLKDIV_TOP			S5P_CLKREG(0x0C510)
 #define S5P_CLKDIV_CAM			S5P_CLKREG(0x0C520)
 #define S5P_CLKDIV_TV			S5P_CLKREG(0x0C524)
@@ -54,7 +63,6 @@
 #define S5P_CLKDIV_G3D			S5P_CLKREG(0x0C52C)
 #define S5P_CLKDIV_IMAGE		S5P_CLKREG(0x0C530)
 #define S5P_CLKDIV_LCD0			S5P_CLKREG(0x0C534)
-#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
 #define S5P_CLKDIV_MAUDIO		S5P_CLKREG(0x0C53C)
 #define S5P_CLKDIV_FSYS0		S5P_CLKREG(0x0C540)
 #define S5P_CLKDIV_FSYS1		S5P_CLKREG(0x0C544)
@@ -68,16 +76,6 @@
 #define S5P_CLKDIV_PERIL5		S5P_CLKREG(0x0C564)
 #define S5P_CLKDIV2_RATIO		S5P_CLKREG(0x0C580)
 
-#define S5P_CLKSRC_MASK_TOP		S5P_CLKREG(0x0C310)
-#define S5P_CLKSRC_MASK_CAM		S5P_CLKREG(0x0C320)
-#define S5P_CLKSRC_MASK_TV		S5P_CLKREG(0x0C324)
-#define S5P_CLKSRC_MASK_LCD0		S5P_CLKREG(0x0C334)
-#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
-#define S5P_CLKSRC_MASK_MAUDIO		S5P_CLKREG(0x0C33C)
-#define S5P_CLKSRC_MASK_FSYS		S5P_CLKREG(0x0C340)
-#define S5P_CLKSRC_MASK_PERIL0		S5P_CLKREG(0x0C350)
-#define S5P_CLKSRC_MASK_PERIL1		S5P_CLKREG(0x0C354)
-
 #define S5P_CLKDIV_STAT_TOP		S5P_CLKREG(0x0C610)
 
 #define S5P_CLKGATE_SCLKCAM		S5P_CLKREG(0x0C820)
@@ -85,13 +83,20 @@
 #define S5P_CLKGATE_IP_TV		S5P_CLKREG(0x0C924)
 #define S5P_CLKGATE_IP_MFC		S5P_CLKREG(0x0C928)
 #define S5P_CLKGATE_IP_G3D		S5P_CLKREG(0x0C92C)
-#define S5P_CLKGATE_IP_IMAGE		S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C930) : \
+					S5P_CLKREG(0x04930))
+#define S5P_CLKGATE_IP_IMAGE_4210	S5P_CLKREG(0x0C930)
+#define S5P_CLKGATE_IP_IMAGE_4212	S5P_CLKREG(0x04930)
 #define S5P_CLKGATE_IP_LCD0		S5P_CLKREG(0x0C934)
-#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
 #define S5P_CLKGATE_IP_FSYS		S5P_CLKREG(0x0C940)
 #define S5P_CLKGATE_IP_GPS		S5P_CLKREG(0x0C94C)
 #define S5P_CLKGATE_IP_PERIL		S5P_CLKREG(0x0C950)
-#define S5P_CLKGATE_IP_PERIR		S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR		(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x0C960) : \
+					S5P_CLKREG(0x08960))
+#define S5P_CLKGATE_IP_PERIR_4210	S5P_CLKREG(0x0C960)
+#define S5P_CLKGATE_IP_PERIR_4212	S5P_CLKREG(0x08960)
 #define S5P_CLKGATE_BLOCK		S5P_CLKREG(0x0C970)
 
 #define S5P_CLKSRC_MASK_DMC		S5P_CLKREG(0x10300)
@@ -102,11 +107,17 @@
 #define S5P_CLKGATE_IP_DMC		S5P_CLKREG(0x10900)
 
 #define S5P_APLL_LOCK			S5P_CLKREG(0x14000)
-#define S5P_MPLL_LOCK			S5P_CLKREG(0x14004)
+#define S5P_MPLL_LOCK			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14004) :  \
+					S5P_CLKREG(0x10008))
 #define S5P_APLL_CON0			S5P_CLKREG(0x14100)
 #define S5P_APLL_CON1			S5P_CLKREG(0x14104)
-#define S5P_MPLL_CON0			S5P_CLKREG(0x14108)
-#define S5P_MPLL_CON1			S5P_CLKREG(0x1410C)
+#define S5P_MPLL_CON0			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x14108) : \
+					S5P_CLKREG(0x10108))
+#define S5P_MPLL_CON1			(soc_is_exynos4210() ? \
+					S5P_CLKREG(0x1410C) : \
+					S5P_CLKREG(0x1010C))
 
 #define S5P_CLKSRC_CPU			S5P_CLKREG(0x14200)
 #define S5P_CLKMUX_STATCPU		S5P_CLKREG(0x14400)
@@ -183,6 +194,13 @@
 #define S5P_CLKDIV_BUS_GPLR_SHIFT	(4)
 #define S5P_CLKDIV_BUS_GPLR_MASK	(0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
 
+/* Only for EXYNOS4210 */
+
+#define S5P_CLKSRC_LCD1			S5P_CLKREG(0x0C238)
+#define S5P_CLKSRC_MASK_LCD1		S5P_CLKREG(0x0C338)
+#define S5P_CLKDIV_LCD1			S5P_CLKREG(0x0C538)
+#define S5P_CLKGATE_IP_LCD1		S5P_CLKREG(0x0C938)
+
 /* Compatibility defines and inclusion */
 
 #include <mach/regs-pmu.h>
diff --git a/arch/arm/mach-exynos4/include/mach/regs-mct.h b/arch/arm/mach-exynos4/include/mach/regs-mct.h
index ca9c843..80dd02a 100644
--- a/arch/arm/mach-exynos4/include/mach/regs-mct.h
+++ b/arch/arm/mach-exynos4/include/mach/regs-mct.h
@@ -31,8 +31,9 @@
 #define EXYNOS4_MCT_G_INT_ENB		EXYNOS4_MCTREG(0x248)
 #define EXYNOS4_MCT_G_WSTAT		EXYNOS4_MCTREG(0x24C)
 
-#define EXYNOS4_MCT_L0_BASE		EXYNOS4_MCTREG(0x300)
-#define EXYNOS4_MCT_L1_BASE		EXYNOS4_MCTREG(0x400)
+#define _EXYNOS4_MCT_L_BASE		EXYNOS4_MCTREG(0x300)
+#define EXYNOS4_MCT_L_BASE(x)		(_EXYNOS4_MCT_L_BASE + (0x100 * x))
+#define EXYNOS4_MCT_L_MASK		(0xffffff00)
 
 #define MCT_L_TCNTB_OFFSET		(0x00)
 #define MCT_L_ICNTB_OFFSET		(0x08)
diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c
new file mode 100644
index 0000000..b5f6f38
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-origen.c
@@ -0,0 +1,108 @@
+/* linux/arch/arm/mach-exynos4/mach-origen.c
+ *
+ * Copyright (c) 2011 Insignal Co., Ltd.
+ *		http://www.insignal.co.kr/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/exynos4.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+#include <plat/iic.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define ORIGEN_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define ORIGEN_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define ORIGEN_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= ORIGEN_UCON_DEFAULT,
+		.ulcon		= ORIGEN_ULCON_DEFAULT,
+		.ufcon		= ORIGEN_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= EXYNOS4_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct platform_device *origen_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+};
+
+static void __init origen_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
+}
+
+static void __init origen_machine_init(void)
+{
+	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
+	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
+}
+
+MACHINE_START(ORIGEN, "ORIGEN")
+	/* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= origen_map_io,
+	.init_machine	= origen_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdk4x12.c b/arch/arm/mach-exynos4/mach-smdk4x12.c
new file mode 100644
index 0000000..fcf2e0e
--- /dev/null
+++ b/arch/arm/mach-exynos4/mach-smdk4x12.c
@@ -0,0 +1,302 @@
+/*
+ * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
+ *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/io.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/regulator/machine.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/backlight.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/exynos4.h>
+#include <plat/gpio-cfg.h>
+#include <plat/iic.h>
+#include <plat/keypad.h>
+#include <plat/regs-serial.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDK4X12_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDK4X12_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDK4X12_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDK4X12_UCON_DEFAULT,
+		.ulcon		= SMDK4X12_ULCON_DEFAULT,
+		.ufcon		= SMDK4X12_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_INTERNAL,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct regulator_consumer_supply max8997_buck1 =
+	REGULATOR_SUPPLY("vdd_arm", NULL);
+
+static struct regulator_consumer_supply max8997_buck2 =
+	REGULATOR_SUPPLY("vdd_int", NULL);
+
+static struct regulator_consumer_supply max8997_buck3 =
+	REGULATOR_SUPPLY("vdd_g3d", NULL);
+
+static struct regulator_init_data max8997_buck1_data = {
+	.constraints	= {
+		.name		= "VDD_ARM_SMDK4X12",
+		.min_uV		= 925000,
+		.max_uV		= 1350000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck1,
+};
+
+static struct regulator_init_data max8997_buck2_data = {
+	.constraints	= {
+		.name		= "VDD_INT_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.always_on	= 1,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck2,
+};
+
+static struct regulator_init_data max8997_buck3_data = {
+	.constraints	= {
+		.name		= "VDD_G3D_SMDK4X12",
+		.min_uV		= 950000,
+		.max_uV		= 1150000,
+		.valid_ops_mask	= REGULATOR_CHANGE_VOLTAGE |
+				  REGULATOR_CHANGE_STATUS,
+		.state_mem	= {
+			.disabled	= 1,
+		},
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &max8997_buck3,
+};
+
+static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
+	{ MAX8997_BUCK1, &max8997_buck1_data },
+	{ MAX8997_BUCK2, &max8997_buck2_data },
+	{ MAX8997_BUCK3, &max8997_buck3_data },
+};
+
+static struct max8997_platform_data smdk4x12_max8997_pdata = {
+	.num_regulators	= ARRAY_SIZE(smdk4x12_max8997_regulators),
+	.regulators	= smdk4x12_max8997_regulators,
+
+	.buck1_voltage[0] = 1100000,	/* 1.1V */
+	.buck1_voltage[1] = 1100000,	/* 1.1V */
+	.buck1_voltage[2] = 1100000,	/* 1.1V */
+	.buck1_voltage[3] = 1100000,	/* 1.1V */
+	.buck1_voltage[4] = 1100000,	/* 1.1V */
+	.buck1_voltage[5] = 1100000,	/* 1.1V */
+	.buck1_voltage[6] = 1000000,	/* 1.0V */
+	.buck1_voltage[7] = 950000,	/* 0.95V */
+
+	.buck2_voltage[0] = 1100000,	/* 1.1V */
+	.buck2_voltage[1] = 1000000,	/* 1.0V */
+	.buck2_voltage[2] = 950000,	/* 0.95V */
+	.buck2_voltage[3] = 900000,	/* 0.9V */
+	.buck2_voltage[4] = 1100000,	/* 1.1V */
+	.buck2_voltage[5] = 1000000,	/* 1.0V */
+	.buck2_voltage[6] = 950000,	/* 0.95V */
+	.buck2_voltage[7] = 900000,	/* 0.9V */
+
+	.buck5_voltage[0] = 1100000,	/* 1.1V */
+	.buck5_voltage[1] = 1100000,	/* 1.1V */
+	.buck5_voltage[2] = 1100000,	/* 1.1V */
+	.buck5_voltage[3] = 1100000,	/* 1.1V */
+	.buck5_voltage[4] = 1100000,	/* 1.1V */
+	.buck5_voltage[5] = 1100000,	/* 1.1V */
+	.buck5_voltage[6] = 1100000,	/* 1.1V */
+	.buck5_voltage[7] = 1100000,	/* 1.1V */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
+	{
+		I2C_BOARD_INFO("max8997", 0x66),
+		.platform_data	= &smdk4x12_max8997_pdata,
+	}
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
+	{ I2C_BOARD_INFO("wm8994", 0x1a), }
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
+	/* nothing here yet */
+};
+
+static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
+	.no = EXYNOS4_GPD0(1),
+	.func = S3C_GPIO_SFN(2),
+};
+
+static struct platform_pwm_backlight_data smdk4x12_bl_data = {
+	.pwm_id = 1,
+	.pwm_period_ns  = 1000,
+};
+
+static uint32_t smdk4x12_keymap[] __initdata = {
+	/* KEY(row, col, keycode) */
+	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
+	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+};
+
+static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
+	.keymap		= smdk4x12_keymap,
+	.keymap_size	= ARRAY_SIZE(smdk4x12_keymap),
+};
+
+static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
+	.keymap_data	= &smdk4x12_keymap_data,
+	.rows		= 2,
+	.cols		= 5,
+};
+
+static struct platform_device *smdk4x12_devices[] __initdata = {
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_i2c3,
+	&s3c_device_i2c7,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&samsung_device_keypad,
+};
+
+static void __init smdk4x12_map_io(void)
+{
+	clk_xusbxti.rate = 24000000;
+
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
+	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
+}
+
+static void __init smdk4x12_machine_init(void)
+{
+	s3c_i2c0_set_platdata(NULL);
+	i2c_register_board_info(0, smdk4x12_i2c_devs0,
+				ARRAY_SIZE(smdk4x12_i2c_devs0));
+
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(1, smdk4x12_i2c_devs1,
+				ARRAY_SIZE(smdk4x12_i2c_devs1));
+
+	s3c_i2c3_set_platdata(NULL);
+	i2c_register_board_info(3, smdk4x12_i2c_devs3,
+				ARRAY_SIZE(smdk4x12_i2c_devs3));
+
+	s3c_i2c7_set_platdata(NULL);
+	i2c_register_board_info(7, smdk4x12_i2c_devs7,
+				ARRAY_SIZE(smdk4x12_i2c_devs7));
+
+	samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
+
+	samsung_keypad_set_platdata(&smdk4x12_keypad_data);
+
+	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
+
+	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
+}
+
+MACHINE_START(SMDK4212, "SMDK4212")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
+
+MACHINE_START(SMDK4412, "SMDK4412")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	/* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdk4x12_map_io,
+	.init_machine	= smdk4x12_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c
deleted file mode 100644
index b24ddd7..0000000
--- a/arch/arm/mach-exynos4/mach-smdkc210.c
+++ /dev/null
@@ -1,309 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkc210.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/pwm_backlight.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/regs-fb-v4.h>
-#include <plat/exynos4.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/iic.h>
-#include <plat/pd.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-
-#include <mach/map.h>
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
-				 S3C2410_UCON_RXILEVEL |	\
-				 S3C2410_UCON_TXIRQMODE |	\
-				 S3C2410_UCON_RXIRQMODE |	\
-				 S3C2410_UCON_RXFIFO_TOI |	\
-				 S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
-
-#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
-				 S5PV210_UFCON_TXTRIG4 |	\
-				 S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
-	[0] = {
-		.hwport		= 0,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[1] = {
-		.hwport		= 1,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[2] = {
-		.hwport		= 2,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-	[3] = {
-		.hwport		= 3,
-		.flags		= 0,
-		.ucon		= SMDKC210_UCON_DEFAULT,
-		.ulcon		= SMDKC210_ULCON_DEFAULT,
-		.ufcon		= SMDKC210_UFCON_DEFAULT,
-	},
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK0(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
-	.max_width		= 8,
-	.host_caps		= MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
-	.cd_type		= S3C_SDHCI_CD_GPIO,
-	.ext_cd_gpio		= EXYNOS4_GPK2(2),
-	.ext_cd_gpio_invert	= 1,
-	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
-				   unsigned int power)
-{
-	if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-		/* fire nRESET on power up */
-		gpio_request(EXYNOS4_GPX0(6), "GPX0");
-
-		gpio_direction_output(EXYNOS4_GPX0(6), 1);
-		mdelay(100);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 0);
-		mdelay(10);
-
-		gpio_set_value(EXYNOS4_GPX0(6), 1);
-		mdelay(10);
-
-		gpio_free(EXYNOS4_GPX0(6));
-	} else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
-		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
-		gpio_free(EXYNOS4_GPD0(1));
-#endif
-	}
-}
-
-static struct plat_lcd_data smdkc210_lcd_lte480wv_data = {
-	.set_power		= lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkc210_lcd_lte480wv = {
-	.name			= "platform-lcd",
-	.dev.parent		= &s5p_device_fimd0.dev,
-	.dev.platform_data	= &smdkc210_lcd_lte480wv_data,
-};
-
-static struct s3c_fb_pd_win smdkc210_fb_win0 = {
-	.win_mode = {
-		.left_margin	= 13,
-		.right_margin	= 8,
-		.upper_margin	= 7,
-		.lower_margin	= 5,
-		.hsync_len	= 3,
-		.vsync_len	= 1,
-		.xres		= 800,
-		.yres		= 480,
-	},
-	.max_bpp		= 32,
-	.default_bpp		= 24,
-};
-
-static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = {
-	.win[0]		= &smdkc210_fb_win0,
-	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
-	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
-	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
-};
-
-static struct resource smdkc210_smsc911x_resources[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_SROM_BANK(1),
-		.end	= EXYNOS4_PA_SROM_BANK(1) + SZ_64K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_EINT(5),
-		.end	= IRQ_EINT(5),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
-	},
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkc210_smsc911x = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
-	.resource	= smdkc210_smsc911x_resources,
-	.dev		= {
-		.platform_data	= &smsc9215_config,
-	},
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
-	{I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-static struct platform_device *smdkc210_devices[] __initdata = {
-	&s3c_device_hsmmc0,
-	&s3c_device_hsmmc1,
-	&s3c_device_hsmmc2,
-	&s3c_device_hsmmc3,
-	&s3c_device_i2c1,
-	&s3c_device_rtc,
-	&s3c_device_wdt,
-	&exynos4_device_ac97,
-	&exynos4_device_i2s0,
-	&exynos4_device_pd[PD_MFC],
-	&exynos4_device_pd[PD_G3D],
-	&exynos4_device_pd[PD_LCD0],
-	&exynos4_device_pd[PD_LCD1],
-	&exynos4_device_pd[PD_CAM],
-	&exynos4_device_pd[PD_TV],
-	&exynos4_device_pd[PD_GPS],
-	&exynos4_device_sysmmu,
-	&samsung_asoc_dma,
-	&s5p_device_fimd0,
-	&smdkc210_lcd_lte480wv,
-	&smdkc210_smsc911x,
-};
-
-static void __init smdkc210_smsc911x_init(void)
-{
-	u32 cs1;
-
-	/* configure nCS1 width to 16 bits */
-	cs1 = __raw_readl(S5P_SROM_BW) &
-		~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
-	cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
-		(1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
-		(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
-		S5P_SROM_BW__NCS1__SHIFT;
-	__raw_writel(cs1, S5P_SROM_BW);
-
-	/* set timing for nCS1 suitable for ethernet chip */
-	__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
-		     (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
-		     (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
-		     (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
-		     (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = {
-	.no = EXYNOS4_GPD0(1),
-	.func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkc210_bl_data = {
-	.pwm_id = 1,
-	.pwm_period_ns  = 1000,
-};
-
-static void __init smdkc210_map_io(void)
-{
-	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
-	s3c24xx_init_clocks(24000000);
-	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
-}
-
-static void __init smdkc210_machine_init(void)
-{
-	s3c_i2c1_set_platdata(NULL);
-	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
-	smdkc210_smsc911x_init();
-
-	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
-	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
-	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
-	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
-
-	samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data);
-	s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata);
-
-	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
-}
-
-MACHINE_START(SMDKC210, "SMDKC210")
-	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
-	.atag_offset	= 0x100,
-	.init_irq	= exynos4_init_irq,
-	.map_io		= smdkc210_map_io,
-	.init_machine	= smdkc210_machine_init,
-	.timer		= &exynos4_timer,
-MACHINE_END
diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c
index d90fcdd..2c1a076 100644
--- a/arch/arm/mach-exynos4/mach-smdkv310.c
+++ b/arch/arm/mach-exynos4/mach-smdkv310.c
@@ -9,7 +9,9 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/lcd.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/smsc911x.h>
@@ -21,11 +23,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
+#include <video/platform_lcd.h>
 #include <plat/regs-serial.h>
 #include <plat/regs-srom.h>
+#include <plat/regs-fb-v4.h>
 #include <plat/exynos4.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/keypad.h>
 #include <plat/sdhci.h>
 #include <plat/iic.h>
@@ -112,6 +117,67 @@
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
 
+static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	if (power) {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+		/* fire nRESET on power up */
+		gpio_request(EXYNOS4_GPX0(6), "GPX0");
+
+		gpio_direction_output(EXYNOS4_GPX0(6), 1);
+		mdelay(100);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 0);
+		mdelay(10);
+
+		gpio_set_value(EXYNOS4_GPX0(6), 1);
+		mdelay(10);
+
+		gpio_free(EXYNOS4_GPX0(6));
+	} else {
+#if !defined(CONFIG_BACKLIGHT_PWM)
+		gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
+		gpio_free(EXYNOS4_GPD0(1));
+#endif
+	}
+}
+
+static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
+	.set_power		= lcd_lte480wv_set_power,
+};
+
+static struct platform_device smdkv310_lcd_lte480wv = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s5p_device_fimd0.dev,
+	.dev.platform_data	= &smdkv310_lcd_lte480wv_data,
+};
+
+static struct s3c_fb_pd_win smdkv310_fb_win0 = {
+	.win_mode = {
+		.left_margin	= 13,
+		.right_margin	= 8,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp		= 32,
+	.default_bpp		= 24,
+};
+
+static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
+	.win[0]		= &smdkv310_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+
 static struct resource smdkv310_smsc911x_resources[] = {
 	[0] = {
 		.start	= EXYNOS4_PA_SROM_BANK(1),
@@ -188,6 +254,8 @@
 	&exynos4_device_sysmmu,
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
+	&s5p_device_fimd0,
+	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
 };
@@ -248,6 +316,7 @@
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
 	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
+	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -261,3 +330,12 @@
 	.init_machine	= smdkv310_machine_init,
 	.timer		= &exynos4_timer,
 MACHINE_END
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.atag_offset	= 0x100,
+	.init_irq	= exynos4_init_irq,
+	.map_io		= smdkv310_map_io,
+	.init_machine	= smdkv310_machine_init,
+	.timer		= &exynos4_timer,
+MACHINE_END
diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c
index 85a1bb7..f191608 100644
--- a/arch/arm/mach-exynos4/mct.c
+++ b/arch/arm/mach-exynos4/mct.c
@@ -20,19 +20,31 @@
 #include <linux/delay.h>
 #include <linux/percpu.h>
 
+#include <asm/hardware/gic.h>
+
+#include <plat/cpu.h>
+
 #include <mach/map.h>
+#include <mach/irqs.h>
 #include <mach/regs-mct.h>
 #include <asm/mach/time.h>
 
+enum {
+	MCT_INT_SPI,
+	MCT_INT_PPI
+};
+
 static unsigned long clk_cnt_per_tick;
 static unsigned long clk_rate;
+static unsigned int mct_int_type;
 
 struct mct_clock_event_device {
 	struct clock_event_device *evt;
 	void __iomem *base;
+	char name[10];
 };
 
-struct mct_clock_event_device mct_tick[2];
+struct mct_clock_event_device mct_tick[NR_CPUS];
 
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
@@ -42,57 +54,53 @@
 
 	__raw_writel(value, addr);
 
-	switch ((u32) addr) {
-	case (u32) EXYNOS4_MCT_G_TCON:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 16;		/* G_TCON write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_L:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 0;		/* G_COMP0_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_U:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 1;		/* G_COMP0_U write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
-		stat_addr = EXYNOS4_MCT_G_WSTAT;
-		mask = 1 << 2;		/* G_COMP0_ADD_INCR write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_L:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 0;		/* G_CNT_L write status */
-		break;
-	case (u32) EXYNOS4_MCT_G_CNT_U:
-		stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
-		mask = 1 << 1;		/* G_CNT_U write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L0_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCON_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 3;		/* L1_TCON write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L0_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_TCNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 0;		/* L1_TCNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L0_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L0_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L0_ICNTB write status */
-		break;
-	case (u32)(EXYNOS4_MCT_L1_BASE + MCT_L_ICNTB_OFFSET):
-		stat_addr = EXYNOS4_MCT_L1_BASE + MCT_L_WSTAT_OFFSET;
-		mask = 1 << 1;		/* L1_ICNTB write status */
-		break;
-	default:
-		return;
+	if (likely(addr >= EXYNOS4_MCT_L_BASE(0))) {
+		u32 base = (u32) addr & EXYNOS4_MCT_L_MASK;
+		switch ((u32) addr & ~EXYNOS4_MCT_L_MASK) {
+		case (u32) MCT_L_TCON_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 3;		/* L_TCON write status */
+			break;
+		case (u32) MCT_L_ICNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 1;		/* L_ICNTB write status */
+			break;
+		case (u32) MCT_L_TCNTB_OFFSET:
+			stat_addr = (void __iomem *) base + MCT_L_WSTAT_OFFSET;
+			mask = 1 << 0;		/* L_TCNTB write status */
+			break;
+		default:
+			return;
+		}
+	} else {
+		switch ((u32) addr) {
+		case (u32) EXYNOS4_MCT_G_TCON:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 16;		/* G_TCON write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_L:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 0;		/* G_COMP0_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_U:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 1;		/* G_COMP0_U write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_COMP0_ADD_INCR:
+			stat_addr = EXYNOS4_MCT_G_WSTAT;
+			mask = 1 << 2;		/* G_COMP0_ADD_INCR w status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_L:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 0;		/* G_CNT_L write status */
+			break;
+		case (u32) EXYNOS4_MCT_G_CNT_U:
+			stat_addr = EXYNOS4_MCT_G_CNT_WSTAT;
+			mask = 1 << 1;		/* G_CNT_U write status */
+			break;
+		default:
+			return;
+		}
 	}
 
 	/* Wait maximum 1 ms until written values are applied */
@@ -132,12 +140,18 @@
 	return ((cycle_t)hi << 32) | lo;
 }
 
+static void exynos4_frc_resume(struct clocksource *cs)
+{
+	exynos4_mct_frc_start(0, 0);
+}
+
 struct clocksource mct_frc = {
 	.name		= "mct-frc",
 	.rating		= 400,
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(64),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.resume		= exynos4_frc_resume,
 };
 
 static void __init exynos4_clocksource_init(void)
@@ -315,9 +329,8 @@
 	}
 }
 
-static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+static int exynos4_mct_tick_clear(struct mct_clock_event_device *mevt)
 {
-	struct mct_clock_event_device *mevt = dev_id;
 	struct clock_event_device *evt = mevt->evt;
 
 	/*
@@ -329,7 +342,20 @@
 		exynos4_mct_tick_stop(mevt);
 
 	/* Clear the MCT tick interrupt */
-	exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+	if (__raw_readl(mevt->base + MCT_L_INT_CSTAT_OFFSET) & 1) {
+		exynos4_mct_write(0x1, mevt->base + MCT_L_INT_CSTAT_OFFSET);
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
+static irqreturn_t exynos4_mct_tick_isr(int irq, void *dev_id)
+{
+	struct mct_clock_event_device *mevt = dev_id;
+	struct clock_event_device *evt = mevt->evt;
+
+	exynos4_mct_tick_clear(mevt);
 
 	evt->event_handler(evt);
 
@@ -354,14 +380,10 @@
 
 	mct_tick[cpu].evt = evt;
 
-	if (cpu == 0) {
-		mct_tick[cpu].base = EXYNOS4_MCT_L0_BASE;
-		evt->name = "mct_tick0";
-	} else {
-		mct_tick[cpu].base = EXYNOS4_MCT_L1_BASE;
-		evt->name = "mct_tick1";
-	}
+	mct_tick[cpu].base = EXYNOS4_MCT_L_BASE(cpu);
+	sprintf(mct_tick[cpu].name, "mct_tick%d", cpu);
 
+	evt->name = mct_tick[cpu].name;
 	evt->cpumask = cpumask_of(cpu);
 	evt->set_next_event = exynos4_tick_set_next_event;
 	evt->set_mode = exynos4_tick_set_mode;
@@ -378,22 +400,28 @@
 
 	exynos4_mct_write(0x1, mct_tick[cpu].base + MCT_L_TCNTB_OFFSET);
 
-	if (cpu == 0) {
-		mct_tick0_event_irq.dev_id = &mct_tick[cpu];
-		evt->irq = IRQ_MCT_L0;
-		setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+	if (mct_int_type == MCT_INT_SPI) {
+		if (cpu == 0) {
+			mct_tick0_event_irq.dev_id = &mct_tick[cpu];
+			evt->irq = IRQ_MCT_L0;
+			setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+		} else {
+			mct_tick1_event_irq.dev_id = &mct_tick[cpu];
+			evt->irq = IRQ_MCT_L1;
+			setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
+			irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		}
 	} else {
-		mct_tick1_event_irq.dev_id = &mct_tick[cpu];
-		evt->irq = IRQ_MCT_L1;
-		setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
-		irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+		gic_enable_ppi(IRQ_MCT_LOCALTIMER);
 	}
 }
 
 /* Setup the local clock events for a CPU */
-void __cpuinit local_timer_setup(struct clock_event_device *evt)
+int __cpuinit local_timer_setup(struct clock_event_device *evt)
 {
 	exynos4_mct_tick_init(evt);
+
+	return 0;
 }
 
 void local_timer_stop(struct clock_event_device *evt)
@@ -414,6 +442,11 @@
 
 static void __init exynos4_timer_init(void)
 {
+	if (soc_is_exynos4210())
+		mct_int_type = MCT_INT_SPI;
+	else
+		mct_int_type = MCT_INT_PPI;
+
 	exynos4_timer_resources();
 	exynos4_clocksource_init();
 	exynos4_clockevent_init();
diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c
index a08c536..782dcf1 100644
--- a/arch/arm/mach-exynos4/platsmp.c
+++ b/arch/arm/mach-exynos4/platsmp.c
@@ -30,9 +30,13 @@
 #include <mach/regs-clock.h>
 #include <mach/regs-pmu.h>
 
+#include <plat/cpu.h>
+
+extern unsigned int gic_bank_offset;
 extern void exynos4_secondary_startup(void);
 
-#define CPU1_BOOT_REG S5P_VA_SYSRAM
+#define CPU1_BOOT_REG		(samsung_rev() == EXYNOS4210_REV_1_1 ? \
+				S5P_INFORM5 : S5P_VA_SYSRAM)
 
 /*
  * control for which core is the next to come out of the secondary
@@ -64,9 +68,9 @@
 static void __cpuinit exynos4_gic_secondary_init(void)
 {
 	void __iomem *dist_base = S5P_VA_GIC_DIST +
-				 (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	void __iomem *cpu_base = S5P_VA_GIC_CPU +
-				(EXYNOS4_GIC_BANK_OFFSET * smp_processor_id());
+				(gic_bank_offset * smp_processor_id());
 	int i;
 
 	/*
@@ -106,6 +110,8 @@
 	 */
 	spin_lock(&boot_lock);
 	spin_unlock(&boot_lock);
+
+	set_cpu_online(cpu, true);
 }
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
@@ -214,5 +220,6 @@
 	 * until it receives a soft interrupt, and then the
 	 * secondary CPU branches to this address.
 	 */
-	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), S5P_VA_SYSRAM);
+	__raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+			CPU1_BOOT_REG);
 }
diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c
index bc6ca94..62e4f43 100644
--- a/arch/arm/mach-exynos4/pm.c
+++ b/arch/arm/mach-exynos4/pm.c
@@ -41,7 +41,6 @@
 	{ .reg = S5P_CLKSRC_MASK_CAM			, .val = 0x11111111, },
 	{ .reg = S5P_CLKSRC_MASK_TV			, .val = 0x00000111, },
 	{ .reg = S5P_CLKSRC_MASK_LCD0			, .val = 0x00001111, },
-	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
 	{ .reg = S5P_CLKSRC_MASK_MAUDIO			, .val = 0x00000001, },
 	{ .reg = S5P_CLKSRC_MASK_FSYS			, .val = 0x01011111, },
 	{ .reg = S5P_CLKSRC_MASK_PERIL0			, .val = 0x01111111, },
@@ -49,6 +48,10 @@
 	{ .reg = S5P_CLKSRC_MASK_DMC			, .val = 0x00010000, },
 };
 
+static struct sleep_save exynos4210_set_clksrc[] = {
+	{ .reg = S5P_CLKSRC_MASK_LCD1			, .val = 0x00001111, },
+};
+
 static struct sleep_save exynos4_epll_save[] = {
 	SAVE_ITEM(S5P_EPLL_CON0),
 	SAVE_ITEM(S5P_EPLL_CON1),
@@ -60,77 +63,6 @@
 };
 
 static struct sleep_save exynos4_core_save[] = {
-	/* CMU side */
-	SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
-	SAVE_ITEM(S5P_CLKDIV_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS),
-	SAVE_ITEM(S5P_CLKSRC_TOP0),
-	SAVE_ITEM(S5P_CLKSRC_TOP1),
-	SAVE_ITEM(S5P_CLKSRC_CAM),
-	SAVE_ITEM(S5P_CLKSRC_TV),
-	SAVE_ITEM(S5P_CLKSRC_MFC),
-	SAVE_ITEM(S5P_CLKSRC_G3D),
-	SAVE_ITEM(S5P_CLKSRC_IMAGE),
-	SAVE_ITEM(S5P_CLKSRC_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_CAM),
-	SAVE_ITEM(S5P_CLKDIV_TV),
-	SAVE_ITEM(S5P_CLKDIV_MFC),
-	SAVE_ITEM(S5P_CLKDIV_G3D),
-	SAVE_ITEM(S5P_CLKDIV_IMAGE),
-	SAVE_ITEM(S5P_CLKDIV_LCD0),
-	SAVE_ITEM(S5P_CLKDIV_LCD1),
-	SAVE_ITEM(S5P_CLKDIV_MAUDIO),
-	SAVE_ITEM(S5P_CLKDIV_FSYS0),
-	SAVE_ITEM(S5P_CLKDIV_FSYS1),
-	SAVE_ITEM(S5P_CLKDIV_FSYS2),
-	SAVE_ITEM(S5P_CLKDIV_FSYS3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL0),
-	SAVE_ITEM(S5P_CLKDIV_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV_PERIL2),
-	SAVE_ITEM(S5P_CLKDIV_PERIL3),
-	SAVE_ITEM(S5P_CLKDIV_PERIL4),
-	SAVE_ITEM(S5P_CLKDIV_PERIL5),
-	SAVE_ITEM(S5P_CLKDIV_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TOP),
-	SAVE_ITEM(S5P_CLKSRC_MASK_CAM),
-	SAVE_ITEM(S5P_CLKSRC_MASK_TV),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_LCD1),
-	SAVE_ITEM(S5P_CLKSRC_MASK_MAUDIO),
-	SAVE_ITEM(S5P_CLKSRC_MASK_FSYS),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0),
-	SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1),
-	SAVE_ITEM(S5P_CLKDIV2_RATIO),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_CAM),
-	SAVE_ITEM(S5P_CLKGATE_IP_TV),
-	SAVE_ITEM(S5P_CLKGATE_IP_MFC),
-	SAVE_ITEM(S5P_CLKGATE_IP_G3D),
-	SAVE_ITEM(S5P_CLKGATE_IP_IMAGE),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD0),
-	SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
-	SAVE_ITEM(S5P_CLKGATE_IP_FSYS),
-	SAVE_ITEM(S5P_CLKGATE_IP_GPS),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIL),
-	SAVE_ITEM(S5P_CLKGATE_IP_PERIR),
-	SAVE_ITEM(S5P_CLKGATE_BLOCK),
-	SAVE_ITEM(S5P_CLKSRC_MASK_DMC),
-	SAVE_ITEM(S5P_CLKSRC_DMC),
-	SAVE_ITEM(S5P_CLKDIV_DMC0),
-	SAVE_ITEM(S5P_CLKDIV_DMC1),
-	SAVE_ITEM(S5P_CLKGATE_IP_DMC),
-	SAVE_ITEM(S5P_CLKSRC_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU),
-	SAVE_ITEM(S5P_CLKDIV_CPU + 0x4),
-	SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
-	SAVE_ITEM(S5P_CLKGATE_IP_CPU),
-
 	/* GIC side */
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x000),
 	SAVE_ITEM(S5P_VA_GIC_CPU + 0x004),
@@ -268,6 +200,9 @@
 
 	s3c_pm_do_restore_core(exynos4_set_clksrc, ARRAY_SIZE(exynos4_set_clksrc));
 
+	if (soc_is_exynos4210())
+		s3c_pm_do_restore_core(exynos4210_set_clksrc, ARRAY_SIZE(exynos4210_set_clksrc));
+
 }
 
 static int exynos4_pm_add(struct sys_device *sysdev)
diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c
index 1ee0ebf..7862bfb 100644
--- a/arch/arm/mach-exynos4/setup-keypad.c
+++ b/arch/arm/mach-exynos4/setup-keypad.c
@@ -19,15 +19,16 @@
 
 	if (rows > 8) {
 		/* Set all the necessary GPX2 pins: KP_ROW[0~7] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 
 		/* Set all the necessary GPX3 pins: KP_ROW[8~] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8),
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
+					 S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
 	} else {
 		/* Set all the necessary GPX2 pins: KP_ROW[x] */
-		s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows,
-					 S3C_GPIO_SFN(3));
+		s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
+					S3C_GPIO_PULL_UP);
 	}
 
 	/* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
diff --git a/arch/arm/mach-gemini/include/mach/gpio.h b/arch/arm/mach-gemini/include/mach/gpio.h
index 3bc2c70..40a0527 100644
--- a/arch/arm/mach-gemini/include/mach/gpio.h
+++ b/arch/arm/mach-gemini/include/mach/gpio.h
@@ -13,11 +13,6 @@
 #define __MACH_GPIO_H__
 
 #include <mach/irqs.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
 
 #define gpio_to_irq(x)	((x) + GPIO_IRQ_BASE)
 #define irq_to_gpio(x)	((x) - GPIO_IRQ_BASE)
diff --git a/arch/arm/mach-imx/iomux-imx31.c b/arch/arm/mach-imx/iomux-imx31.c
index cf8f809..82bd440 100644
--- a/arch/arm/mach-imx/iomux-imx31.c
+++ b/arch/arm/mach-imx/iomux-imx31.c
@@ -17,13 +17,12 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */
-
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
 #include <mach/iomux-mx3.h>
 
 /*
diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c
index efe6109..635b050 100644
--- a/arch/arm/mach-imx/mach-mx27ads.c
+++ b/arch/arm/mach-imx/mach-mx27ads.c
@@ -13,7 +13,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
@@ -27,7 +27,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/gpio.h>
 #include <mach/iomux-mx27.h>
 
 #include "devices-imx27.h"
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index b19ae18..a20fb3f 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -32,6 +32,7 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/mtd/physmap.h>
+#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -154,6 +155,7 @@
 static void __init ap_map_io(void)
 {
 	iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc));
+	vga_base = PCI_MEMORY_VADDR;
 }
 
 #define INTEGRATOR_SC_VALID_INT	0x003fffff
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index dd56bfb..11b86e5 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -27,7 +27,6 @@
 #include <linux/spinlock.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <video/vga.h>
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
@@ -505,7 +504,6 @@
 
 	pcibios_min_io = 0x6000;
 	pcibios_min_mem = 0x00100000;
-	vga_base = PCI_MEMORY_VADDR;
 
 	/*
 	 * Hook in our fault handler for PCI errors
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4068166..59a5126 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -13,7 +13,7 @@
  * License version 2. This program is licensed "as is" without any 
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/spinlock.h>
@@ -39,7 +39,7 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
 
 static DEFINE_SPINLOCK(ixp2000_slowport_lock);
 static unsigned long ixp2000_slowport_irq_flags;
diff --git a/arch/arm/mach-ixp2000/include/mach/gpio.h b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
similarity index 95%
rename from arch/arm/mach-ixp2000/include/mach/gpio.h
rename to arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
index 4a88d2c..af836c7 100644
--- a/arch/arm/mach-ixp2000/include/mach/gpio.h
+++ b/arch/arm/mach-ixp2000/include/mach/gpio-ixp2000.h
@@ -3,7 +3,7 @@
  *
  * Copyright (C) 2002 Intel Corporation.
  *
- * This program is free software, you can redistribute it and/or modify 
+ * This program is free software, you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
@@ -11,7 +11,7 @@
 /*
  * IXP2000 GPIO in/out, edge/level detection for IRQs:
  * IRQs are generated on Falling-edge, Rising-Edge, Level-low, Level-High
- * or both Falling-edge and Rising-edge.  
+ * or both Falling-edge and Rising-edge.
  * This must be called *before* the corresponding IRQ is registerd.
  * Use this instead of directly setting the GPIO registers.
  * GPIOs may also be used as GPIOs (e.g. for emulating i2c/smb)
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 235638f..634b6c8 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -14,6 +14,7 @@
  *  Free Software Foundation;  either version 2 of the  License, or (at your
  *  option) any later version.
  */
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -40,8 +41,7 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/arch.h>
 
-#include <mach/gpio.h>
-
+#include <mach/gpio-ixp2000.h>
 
 /*************************************************************************
  * IXDP2x00 IRQ Initialization
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 6f991c5..fd5e7b6 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,6 +179,25 @@
 		"High Speed" UART is n/c (as far as I can tell)
 		20 Pin ARM/Xscale JTAG interface on J2
 
+config MACH_DEVIXP
+	bool "Omicron DEVIXP"
+	help
+	  Say 'Y' here if you want your kernel to support the DEVIXP
+	  board from OMICRON electronics GmbH.
+
+config MACH_MICCPT
+	bool "Omicron MICCPT"
+	select PCI
+	help
+	  Say 'Y' here if you want your kernel to support the MICCPT
+	  board from OMICRON electronics GmbH.
+
+config MACH_MIC256
+	bool "Omicron MIC256"
+	help
+	  Say 'Y' here if you want your kernel to support the MIC256
+	  board from OMICRON electronics GmbH.
+
 comment "IXP4xx Options"
 
 config IXP4XX_INDIRECT_PCI
diff --git a/arch/arm/mach-ixp4xx/Makefile b/arch/arm/mach-ixp4xx/Makefile
index d807fc3..eded94c 100644
--- a/arch/arm/mach-ixp4xx/Makefile
+++ b/arch/arm/mach-ixp4xx/Makefile
@@ -10,6 +10,7 @@
 obj-pci-$(CONFIG_MACH_IXDPG425)		+= ixdpg425-pci.o
 obj-pci-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-pci.o
 obj-pci-$(CONFIG_MACH_GTWX5715)		+= gtwx5715-pci.o
+obj-pci-$(CONFIG_MACH_MICCPT)		+= miccpt-pci.o
 obj-pci-$(CONFIG_MACH_NSLU2)		+= nslu2-pci.o
 obj-pci-$(CONFIG_MACH_NAS100D)		+= nas100d-pci.o
 obj-pci-$(CONFIG_MACH_DSMG600)		+= dsmg600-pci.o
@@ -25,6 +26,9 @@
 obj-$(CONFIG_MACH_IXDPG425)	+= coyote-setup.o
 obj-$(CONFIG_ARCH_ADI_COYOTE)	+= coyote-setup.o
 obj-$(CONFIG_MACH_GTWX5715)	+= gtwx5715-setup.o
+obj-$(CONFIG_MACH_DEVIXP)	+= omixp-setup.o
+obj-$(CONFIG_MACH_MICCPT)	+= omixp-setup.o
+obj-$(CONFIG_MACH_MIC256)	+= omixp-setup.o
 obj-$(CONFIG_MACH_NSLU2)	+= nslu2-setup.o
 obj-$(CONFIG_MACH_NAS100D)	+= nas100d-setup.o
 obj-$(CONFIG_MACH_DSMG600)      += dsmg600-setup.o
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index 71607a7..8837fbc 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -16,7 +16,7 @@
  * Author: Rod Whitby <rod@whitby.id.au>
  * Maintainers: http://www.nslu2-linux.org/
  */
-
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/jiffies.h>
 #include <linux/timer.h>
@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
-#include <asm/gpio.h>
 
 #define DSMG600_SDA_PIN		5
 #define DSMG600_SCL_PIN		4
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index a9540cd..2887c35 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -14,7 +14,7 @@
  * Maintainers: http://www.nslu2-linux.org/
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/if_ether.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
@@ -27,7 +27,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/gpio.h>
 
 #define FSG_SDA_PIN		12
 #define FSG_SCL_PIN		13
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index a5f87de..83d6b4e 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -28,6 +28,8 @@
 #include <linux/kernel.h>
 #include <mach/hardware.h>
 
+#define __ARM_GPIOLIB_COMPLEX
+
 static inline int gpio_request(unsigned gpio, const char *label)
 {
 	return 0;
@@ -70,6 +72,7 @@
 #include <asm-generic/gpio.h>			/* cansleep wrappers */
 
 extern int gpio_to_irq(int gpio);
+#define gpio_to_irq gpio_to_irq
 extern int irq_to_gpio(unsigned int irq);
 
 #endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/uncompress.h b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
index 219d7c1..eb945a9 100644
--- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
@@ -41,7 +41,8 @@
 	 * Some boards are using UART2 as console
 	 */
 	if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
-			 machine_is_gateway7001() || machine_is_wg302v2())
+	    machine_is_gateway7001() || machine_is_wg302v2() ||
+	    machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
 		uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 	else
 		uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/arch/arm/mach-ixp4xx/miccpt-pci.c b/arch/arm/mach-ixp4xx/miccpt-pci.c
new file mode 100644
index 0000000..ca0bae7
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
@@ -0,0 +1,78 @@
+/*
+ * arch/arm/mach-ixp4xx/miccpt-pci.c
+ *
+ * MICCPT board-level PCI initialization
+ *
+ * Copyright (C) 2002 Intel Corporation.
+ * Copyright (C) 2003-2004 MontaVista Software, Inc.
+ * Copyright (C) 2006 OMICRON electronics GmbH
+ *
+ * Author: Michael Jochum <michael.jochum@omicron.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <asm/mach/pci.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#define MAX_DEV		4
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		1
+#define INTB		2
+#define INTC		3
+#define INTD		4
+
+
+void __init miccpt_pci_preinit(void)
+{
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	irq_set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	ixp4xx_pci_preinit();
+}
+
+static int __init miccpt_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
+	};
+
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
+
+	return -1;
+}
+
+struct hw_pci miccpt_pci __initdata = {
+	.nr_controllers = 1,
+	.preinit	= miccpt_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= miccpt_map_irq,
+};
+
+int __init miccpt_pci_init(void)
+{
+	if (machine_is_miccpt())
+		pci_common_init(&miccpt_pci);
+	return 0;
+}
+
+subsys_initcall(miccpt_pci_init);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 9f46692..de716fa 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -17,7 +17,7 @@
  * Maintainers: http://www.nslu2-linux.org/
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/if_ether.h>
 #include <linux/irq.h>
 #include <linux/jiffies.h>
@@ -32,7 +32,6 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <asm/gpio.h>
 
 #define NAS100D_SDA_PIN		5
 #define NAS100D_SCL_PIN		6
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index 3676fbf..ac81ccb 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -16,7 +16,7 @@
  * Maintainers: http://www.nslu2-linux.org/
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/if_ether.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
@@ -30,7 +30,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
-#include <asm/gpio.h>
 
 #define NSLU2_SDA_PIN		7
 #define NSLU2_SCL_PIN		6
diff --git a/arch/arm/mach-ixp4xx/omixp-setup.c b/arch/arm/mach-ixp4xx/omixp-setup.c
new file mode 100644
index 0000000..3b6a81a
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
@@ -0,0 +1,273 @@
+/*
+ * arch/arm/mach-ixp4xx/omixp-setup.c
+ *
+ * omicron ixp4xx board setup
+ *      Copyright (C) 2009 OMICRON electronics GmbH
+ *
+ * based nslu2-setup.c, ixdp425-setup.c:
+ *      Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#ifdef CONFIG_LEDS_CLASS
+#include <linux/leds.h>
+#endif
+
+#include <asm/setup.h>
+#include <asm/memory.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+
+static struct resource omixp_flash_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition omixp_partitions[] = {
+	{
+		.name =		"Recovery Bootloader",
+		.size =		0x00020000,
+		.offset =	0,
+	}, {
+		.name =		"Calibration Data",
+		.size =		0x00020000,
+		.offset =	0x00020000,
+	}, {
+		.name =		"Recovery FPGA",
+		.size =		0x00020000,
+		.offset =	0x00040000,
+	}, {
+		.name =		"Release Bootloader",
+		.size =		0x00020000,
+		.offset =	0x00060000,
+	}, {
+		.name =		"Release FPGA",
+		.size =		0x00020000,
+		.offset =	0x00080000,
+	}, {
+		.name =		"Kernel",
+		.size =		0x00160000,
+		.offset =	0x000a0000,
+	}, {
+		.name =		"Filesystem",
+		.size =		0x00C00000,
+		.offset =	0x00200000,
+	}, {
+		.name =		"Persistent Storage",
+		.size =		0x00200000,
+		.offset =	0x00E00000,
+	},
+};
+
+static struct flash_platform_data omixp_flash_data[] = {
+	{
+		.map_name	= "cfi_probe",
+		.parts		= omixp_partitions,
+		.nr_parts	= ARRAY_SIZE(omixp_partitions),
+	}, {
+		.map_name	= "cfi_probe",
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+};
+
+static struct platform_device omixp_flash_device[] = {
+	{
+		.name		= "IXP4XX-Flash",
+		.id		= 0,
+		.dev = {
+			.platform_data = &omixp_flash_data[0],
+		},
+		.resource = &omixp_flash_resources[0],
+		.num_resources = 1,
+	}, {
+		.name		= "IXP4XX-Flash",
+		.id		= 1,
+		.dev = {
+			.platform_data = &omixp_flash_data[1],
+		},
+		.resource = &omixp_flash_resources[1],
+		.num_resources = 1,
+	},
+};
+
+/* Swap UART's - These boards have the console on UART2. The following
+ * configuration is used:
+ *      ttyS0 .. UART2
+ *      ttyS1 .. UART1
+ * This way standard images can be used with the kernel that expect
+ * the console on ttyS0.
+ */
+static struct resource omixp_uart_resources[] = {
+	{
+		.start		= IXP4XX_UART2_BASE_PHYS,
+		.end		= IXP4XX_UART2_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IXP4XX_UART1_BASE_PHYS,
+		.end		= IXP4XX_UART1_BASE_PHYS + 0x0fff,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct plat_serial8250_port omixp_uart_data[] = {
+	{
+		.mapbase	= IXP4XX_UART2_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	}, {
+		.mapbase	= IXP4XX_UART1_BASE_PHYS,
+		.membase	= (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
+		.irq		= IRQ_IXP4XX_UART1,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= IXP4XX_UART_XTAL,
+	}, {
+		/* list termination */
+	}
+};
+
+static struct platform_device omixp_uart = {
+	.name			= "serial8250",
+	.id			= PLAT8250_DEV_PLATFORM,
+	.dev.platform_data	= omixp_uart_data,
+	.num_resources		= 2,
+	.resource		= omixp_uart_resources,
+};
+
+static struct gpio_led mic256_led_pins[] = {
+	{
+		.name		= "LED-A",
+		.gpio		= 7,
+	},
+};
+
+static struct gpio_led_platform_data mic256_led_data = {
+	.num_leds		= ARRAY_SIZE(mic256_led_pins),
+	.leds			= mic256_led_pins,
+};
+
+static struct platform_device mic256_leds = {
+	.name			= "leds-gpio",
+	.id			= -1,
+	.dev.platform_data	= &mic256_led_data,
+};
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info ixdp425_plat_eth[] = {
+	{
+		.phy		= 0,
+		.rxq		= 3,
+		.txreadyq	= 20,
+	}, {
+		.phy		= 1,
+		.rxq		= 4,
+		.txreadyq	= 21,
+	},
+};
+
+static struct platform_device ixdp425_eth[] = {
+	{
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEB,
+		.dev.platform_data	= ixdp425_plat_eth,
+	}, {
+		.name			= "ixp4xx_eth",
+		.id			= IXP4XX_ETH_NPEC,
+		.dev.platform_data	= ixdp425_plat_eth + 1,
+	},
+};
+
+
+static struct platform_device *devixp_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static struct platform_device *mic256_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&mic256_leds,
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static struct platform_device *miccpt_pldev[] __initdata = {
+	&omixp_uart,
+	&omixp_flash_device[0],
+	&omixp_flash_device[1],
+	&ixdp425_eth[0],
+	&ixdp425_eth[1],
+};
+
+static void __init omixp_init(void)
+{
+	ixp4xx_sys_init();
+
+	/* 16MiB Boot Flash */
+	omixp_flash_resources[0].start = IXP4XX_EXP_BUS_BASE(0);
+	omixp_flash_resources[0].end   = IXP4XX_EXP_BUS_END(0);
+
+	/* 32 MiB Data Flash */
+	omixp_flash_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
+	omixp_flash_resources[1].end   = IXP4XX_EXP_BUS_END(2);
+
+	if (machine_is_devixp())
+		platform_add_devices(devixp_pldev, ARRAY_SIZE(devixp_pldev));
+	else if (machine_is_miccpt())
+		platform_add_devices(miccpt_pldev, ARRAY_SIZE(miccpt_pldev));
+	else if (machine_is_mic256())
+		platform_add_devices(mic256_pldev, ARRAY_SIZE(mic256_pldev));
+}
+
+#ifdef CONFIG_MACH_DEVIXP
+MACHINE_START(DEVIXP, "Omicron DEVIXP")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MICCPT
+MACHINE_START(MICCPT, "Omicron MICCPT")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+#if defined(CONFIG_PCI)
+	.dma_zone_size	= SZ_64M,
+#endif
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_MIC256
+MACHINE_START(MIC256, "Omicron MIC256")
+	.atag_offset    = 0x100,
+	.map_io		= ixp4xx_map_io,
+	.init_irq	= ixp4xx_init_irq,
+	.timer          = &ixp4xx_timer,
+	.init_machine	= omixp_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c
index 05d193a..c4c68e5 100644
--- a/arch/arm/mach-kirkwood/irq.c
+++ b/arch/arm/mach-kirkwood/irq.c
@@ -7,14 +7,13 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <mach/bridge-regs.h>
 #include <plat/irq.h>
-#include <asm/gpio.h>
 #include "common.h"
 
 static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index b0a7d97..cc431fa 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -7,12 +7,11 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
 #include <mach/hardware.h>
 #include <plat/mpp.h>
 #include "common.h"
diff --git a/arch/arm/mach-ks8695/Makefile b/arch/arm/mach-ks8695/Makefile
index 7e3e816..853efd9 100644
--- a/arch/arm/mach-ks8695/Makefile
+++ b/arch/arm/mach-ks8695/Makefile
@@ -3,7 +3,7 @@
 # Makefile for KS8695 architecture support
 #
 
-obj-y				:= cpu.o irq.o time.o gpio.o devices.o
+obj-y				:= cpu.o irq.o time.o devices.o
 obj-m				:=
 obj-n				:=
 obj-				:=
diff --git a/arch/arm/mach-ks8695/board-acs5k.c b/arch/arm/mach-ks8695/board-acs5k.c
index a5fcc7c..a91f99d 100644
--- a/arch/arm/mach-ks8695/board-acs5k.c
+++ b/arch/arm/mach-ks8695/board-acs5k.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -34,7 +34,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c
index fb91a71..d24bcef 100644
--- a/arch/arm/mach-ks8695/board-dsm320.c
+++ b/arch/arm/mach-ks8695/board-dsm320.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -29,7 +29,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/devices.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c
index 8f67a75..16c9565 100644
--- a/arch/arm/mach-ks8695/board-micrel.c
+++ b/arch/arm/mach-ks8695/board-micrel.c
@@ -5,7 +5,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/interrupt.h>
@@ -18,7 +18,7 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
 #include <mach/devices.h>
 
 #include "generic.h"
diff --git a/arch/arm/mach-ks8695/devices.c b/arch/arm/mach-ks8695/devices.c
index b89fb6d..73bd638 100644
--- a/arch/arm/mach-ks8695/devices.c
+++ b/arch/arm/mach-ks8695/devices.c
@@ -20,6 +20,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
diff --git a/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
new file mode 100644
index 0000000..6eb034d
--- /dev/null
+++ b/arch/arm/mach-ks8695/include/mach/gpio-ks8695.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright (C) 2006 Andrew Victor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_KS8659_GPIO_H
+#define __MACH_KS8659_GPIO_H
+
+#include <linux/kernel.h>
+
+#define KS8695_GPIO_0		0
+#define KS8695_GPIO_1		1
+#define KS8695_GPIO_2		2
+#define KS8695_GPIO_3		3
+#define KS8695_GPIO_4		4
+#define KS8695_GPIO_5		5
+#define KS8695_GPIO_6		6
+#define KS8695_GPIO_7		7
+#define KS8695_GPIO_8		8
+#define KS8695_GPIO_9		9
+#define KS8695_GPIO_10		10
+#define KS8695_GPIO_11		11
+#define KS8695_GPIO_12		12
+#define KS8695_GPIO_13		13
+#define KS8695_GPIO_14		14
+#define KS8695_GPIO_15		15
+
+/*
+ * Configure GPIO pin as external interrupt source.
+ */
+extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
+
+/* Register the GPIOs */
+extern void ks8695_register_gpios(void);
+
+#endif /* __MACH_KS8659_GPIO_H */
diff --git a/arch/arm/mach-ks8695/include/mach/gpio.h b/arch/arm/mach-ks8695/include/mach/gpio.h
index 86312d4..f5fda36 100644
--- a/arch/arm/mach-ks8695/include/mach/gpio.h
+++ b/arch/arm/mach-ks8695/include/mach/gpio.h
@@ -11,47 +11,9 @@
 #ifndef __ASM_ARCH_GPIO_H_
 #define __ASM_ARCH_GPIO_H_
 
-#include <linux/kernel.h>
-
-#define KS8695_GPIO_0		0
-#define KS8695_GPIO_1		1
-#define KS8695_GPIO_2		2
-#define KS8695_GPIO_3		3
-#define KS8695_GPIO_4		4
-#define KS8695_GPIO_5		5
-#define KS8695_GPIO_6		6
-#define KS8695_GPIO_7		7
-#define KS8695_GPIO_8		8
-#define KS8695_GPIO_9		9
-#define KS8695_GPIO_10		10
-#define KS8695_GPIO_11		11
-#define KS8695_GPIO_12		12
-#define KS8695_GPIO_13		13
-#define KS8695_GPIO_14		14
-#define KS8695_GPIO_15		15
-
-/*
- * Configure GPIO pin as external interrupt source.
- */
-extern int ks8695_gpio_interrupt(unsigned int pin, unsigned int type);
-
 /*
  * Map IRQ number to GPIO line.
  */
 extern int irq_to_gpio(unsigned int irq);
 
-#include <asm-generic/gpio.h>
-
-/* If it turns out that we need to optimise GPIO access for the
- * Micrel's GPIOs, then these can be changed to check their argument
- * directly as static inlines. However for now it's probably not
- * worthwhile.
- */
-#define gpio_get_value __gpio_get_value
-#define gpio_set_value __gpio_set_value
-#define gpio_to_irq __gpio_to_irq
-
-/* Register the GPIOs */
-extern void ks8695_register_gpios(void);
-
 #endif
diff --git a/arch/arm/mach-ks8695/leds.c b/arch/arm/mach-ks8695/leds.c
index 184ef74..d6f6502 100644
--- a/arch/arm/mach-ks8695/leds.c
+++ b/arch/arm/mach-ks8695/leds.c
@@ -7,14 +7,14 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/gpio.h>
 
 #include <asm/leds.h>
 #include <mach/devices.h>
-#include <mach/gpio.h>
 
 
 static inline void ks8695_led_on(unsigned int led)
diff --git a/arch/arm/mach-lpc32xx/Makefile b/arch/arm/mach-lpc32xx/Makefile
index a5fc5d0..f5db805 100644
--- a/arch/arm/mach-lpc32xx/Makefile
+++ b/arch/arm/mach-lpc32xx/Makefile
@@ -3,6 +3,6 @@
 #
 
 obj-y	:= timer.o irq.o common.o serial.o clock.o
-obj-y	+= gpiolib.o pm.o suspend.o
+obj-y	+= pm.o suspend.o
 obj-y	+= phy3250.o
 
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
new file mode 100644
index 0000000..1816e22
--- /dev/null
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio-lpc32xx.h
@@ -0,0 +1,50 @@
+/*
+ * Author: Kevin Wells <kevin.wells@nxp.com>
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __MACH_GPIO_LPC32XX_H
+#define __MACH_GPIO_LPC32XX_H
+
+/*
+ * Note!
+ * Muxed GP pins need to be setup to the GP state in the board level
+ * code prior to using this driver.
+ * GPI pins : 28xP3 group
+ * GPO pins : 24xP3 group
+ * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
+ */
+
+#define LPC32XX_GPIO_P0_MAX 8
+#define LPC32XX_GPIO_P1_MAX 24
+#define LPC32XX_GPIO_P2_MAX 13
+#define LPC32XX_GPIO_P3_MAX 6
+#define LPC32XX_GPI_P3_MAX 28
+#define LPC32XX_GPO_P3_MAX 24
+
+#define LPC32XX_GPIO_P0_GRP 0
+#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
+#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
+#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
+#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
+#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
+
+/*
+ * A specific GPIO can be selected with this macro
+ * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
+ * See the LPC32x0 User's guide for GPIO group numbers
+ */
+#define LPC32XX_GPIO(x, y) ((x) + (y))
+
+#endif /* __MACH_GPIO_LPC32XX_H */
diff --git a/arch/arm/mach-lpc32xx/include/mach/gpio.h b/arch/arm/mach-lpc32xx/include/mach/gpio.h
index 67d03da..e69de29 100644
--- a/arch/arm/mach-lpc32xx/include/mach/gpio.h
+++ b/arch/arm/mach-lpc32xx/include/mach/gpio.h
@@ -1,74 +0,0 @@
-/*
- * arch/arm/mach-lpc32xx/include/mach/gpio.h
- *
- * Author: Kevin Wells <kevin.wells@nxp.com>
- *
- * Copyright (C) 2010 NXP Semiconductors
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-/*
- * Note!
- * Muxed GP pins need to be setup to the GP state in the board level
- * code prior to using this driver.
- * GPI pins : 28xP3 group
- * GPO pins : 24xP3 group
- * GPIO pins: 8xP0 group, 24xP1 group, 13xP2 group, 6xP3 group
- */
-
-#define LPC32XX_GPIO_P0_MAX 8
-#define LPC32XX_GPIO_P1_MAX 24
-#define LPC32XX_GPIO_P2_MAX 13
-#define LPC32XX_GPIO_P3_MAX 6
-#define LPC32XX_GPI_P3_MAX 28
-#define LPC32XX_GPO_P3_MAX 24
-
-#define LPC32XX_GPIO_P0_GRP 0
-#define LPC32XX_GPIO_P1_GRP (LPC32XX_GPIO_P0_GRP + LPC32XX_GPIO_P0_MAX)
-#define LPC32XX_GPIO_P2_GRP (LPC32XX_GPIO_P1_GRP + LPC32XX_GPIO_P1_MAX)
-#define LPC32XX_GPIO_P3_GRP (LPC32XX_GPIO_P2_GRP + LPC32XX_GPIO_P2_MAX)
-#define LPC32XX_GPI_P3_GRP (LPC32XX_GPIO_P3_GRP + LPC32XX_GPIO_P3_MAX)
-#define LPC32XX_GPO_P3_GRP (LPC32XX_GPI_P3_GRP + LPC32XX_GPI_P3_MAX)
-
-/*
- * A specific GPIO can be selected with this macro
- * ie, GPIO_05 can be selected with LPC32XX_GPIO(LPC32XX_GPIO_P3_GRP, 5)
- * See the LPC32x0 User's guide for GPIO group numbers
- */
-#define LPC32XX_GPIO(x, y) ((x) + (y))
-
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
-#endif
diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c
index 9b621e1..6d2f0d1 100644
--- a/arch/arm/mach-lpc32xx/phy3250.c
+++ b/arch/arm/mach-lpc32xx/phy3250.c
@@ -37,6 +37,7 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
+#include <mach/gpio-lpc32xx.h>
 #include "common.h"
 
 /*
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 06b5fa8..833c3a2 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -8,7 +8,7 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  publishhed by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
@@ -17,13 +17,13 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa168.h>
 #include <mach/pxa168.h>
-#include <mach/gpio.h>
 #include <video/pxa168fb.h>
 #include <linux/input.h>
 #include <plat/pxa27x_keypad.h>
diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c
index c79162a..e411252 100644
--- a/arch/arm/mach-mmp/brownstone.c
+++ b/arch/arm/mach-mmp/brownstone.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/regulator/fixed.h>
diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 98e25d9..32776f3 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -9,11 +9,11 @@
  */
 
 #include <linux/init.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/gpio.h>
 #include <mach/pxa168.h>
 #include <mach/mfp-pxa168.h>
 
diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..c017a98
--- /dev/null
+++ b/arch/arm/mach-mmp/include/mach/gpio-pxa.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_GPIO_PXA_H
+#define __ASM_MACH_GPIO_PXA_H
+
+#include <mach/addr-map.h>
+#include <mach/irqs.h>
+
+#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
+
+#define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+/* NOTE: these macros are defined here to make optimization of
+ * gpio_{get,set}_value() to work when 'gpio' is a constant.
+ * Usage of these macros otherwise is no longer recommended,
+ * use generic GPIO API whenever possible.
+ */
+#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
+
+#include <plat/gpio-pxa.h>
+
+#endif /* __ASM_MACH_GPIO_PXA_H */
diff --git a/arch/arm/mach-mmp/include/mach/gpio.h b/arch/arm/mach-mmp/include/mach/gpio.h
index 7bfb827..6812623 100644
--- a/arch/arm/mach-mmp/include/mach/gpio.h
+++ b/arch/arm/mach-mmp/include/mach/gpio.h
@@ -1,36 +1,13 @@
 #ifndef __ASM_MACH_GPIO_H
 #define __ASM_MACH_GPIO_H
 
-#include <mach/addr-map.h>
-#include <mach/irqs.h>
 #include <asm-generic/gpio.h>
 
-#define GPIO_REGS_VIRT	(APB_VIRT_BASE + 0x19000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*((volatile u32 *)(GPIO_REGS_VIRT + (x))))
-
-#define NR_BUILTIN_GPIO		IRQ_GPIO_NUM
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	(IRQ_GPIO_START + (gpio))
 #define irq_to_gpio(irq)	((irq) - IRQ_GPIO_START)
 
-
 #define __gpio_is_inverted(gpio)	(0)
 #define __gpio_is_occupied(gpio)	(0)
 
-/* NOTE: these macros are defined here to make optimization of
- * gpio_{get,set}_value() to work when 'gpio' is a constant.
- * Usage of these macros otherwise is no longer recommended,
- * use generic GPIO API whenever possible.
- */
-#define GPIO_bit(gpio)	(1 << ((gpio) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24)
-
 #include <plat/gpio.h>
 #endif /* __ASM_MACH_GPIO_H */
diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c
index 5d6421d..8bfac66 100644
--- a/arch/arm/mach-mmp/jasper.c
+++ b/arch/arm/mach-mmp/jasper.c
@@ -14,7 +14,6 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/max8649.h>
 #include <linux/mfd/max8925.h>
diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c
index 079c188..65d8689e 100644
--- a/arch/arm/mach-mmp/mmp2.c
+++ b/arch/arm/mach-mmp/mmp2.c
@@ -9,7 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -25,7 +24,7 @@
 #include <mach/irqs.h>
 #include <mach/dma.h>
 #include <mach/mfp.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 #include <mach/devices.h>
 #include <mach/mmp2.h>
 
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 0156f53..50c1763 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -21,7 +20,7 @@
 #include <mach/regs-apbc.h>
 #include <mach/regs-apmu.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 #include <mach/dma.h>
 #include <mach/devices.h>
 #include <mach/mfp.h>
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 1464607..4ebbfbb 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -7,7 +7,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,7 +19,7 @@
 #include <mach/regs-apmu.h>
 #include <mach/cputype.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 #include <mach/dma.h>
 #include <mach/mfp.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-mmp/tavorevb.c b/arch/arm/mach-mmp/tavorevb.c
index c296b75..eb5be87 100644
--- a/arch/arm/mach-mmp/tavorevb.c
+++ b/arch/arm/mach-mmp/tavorevb.c
@@ -7,18 +7,18 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  publishhed by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
-#include <mach/gpio.h>
 
 #include "common.h"
 
diff --git a/arch/arm/mach-msm/board-msm7x27.c b/arch/arm/mach-msm/board-msm7x27.c
index a807655..6d84ee7 100644
--- a/arch/arm/mach-msm/board-msm7x27.c
+++ b/arch/arm/mach-msm/board-msm7x27.c
@@ -13,7 +13,7 @@
  * GNU General Public License for more details.
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -34,7 +34,6 @@
 
 #include <mach/vreg.h>
 #include <mach/mpp.h>
-#include <mach/gpio.h>
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 
diff --git a/arch/arm/mach-msm/board-msm7x30.c b/arch/arm/mach-msm/board-msm7x30.c
index bb72ea0..71de506 100644
--- a/arch/arm/mach-msm/board-msm7x30.c
+++ b/arch/arm/mach-msm/board-msm7x30.c
@@ -14,7 +14,7 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  * 02110-1301, USA.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
@@ -31,7 +31,6 @@
 #include <asm/memory.h>
 #include <asm/setup.h>
 
-#include <mach/gpio.h>
 #include <mach/board.h>
 #include <mach/msm_iomap.h>
 #include <mach/dma.h>
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 51109b1..7e8909c 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -14,7 +14,7 @@
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
  * 02110-1301, USA.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
@@ -32,7 +32,6 @@
 #include <mach/board.h>
 #include <mach/irqs.h>
 #include <mach/sirc.h>
-#include <mach/gpio.h>
 #include <mach/vreg.h>
 #include <mach/mmc.h>
 
diff --git a/arch/arm/mach-msm/board-sapphire.c b/arch/arm/mach-msm/board-sapphire.c
index dc0bcb5..afa9293 100644
--- a/arch/arm/mach-msm/board-sapphire.c
+++ b/arch/arm/mach-msm/board-sapphire.c
@@ -11,7 +11,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
 */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -22,7 +22,6 @@
 
 #include <linux/delay.h>
 
-#include <asm/gpio.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-msm/board-trout-mmc.c b/arch/arm/mach-msm/board-trout-mmc.c
index f7a9724..8650342 100644
--- a/arch/arm/mach-msm/board-trout-mmc.c
+++ b/arch/arm/mach-msm/board-trout-mmc.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-msm/board-trout-mmc.c
 ** Author: Brian Swetland <swetland@google.com>
 */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -11,7 +11,6 @@
 #include <linux/err.h>
 #include <linux/debugfs.h>
 
-#include <asm/gpio.h>
 #include <asm/io.h>
 
 #include <mach/vreg.h>
diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c
index 729bb49..25105c1 100644
--- a/arch/arm/mach-msm/board-trout-panel.c
+++ b/arch/arm/mach-msm/board-trout-panel.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-msm/board-trout-mddi.c
 ** Author: Brian Swetland <swetland@google.com>
 */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -11,7 +11,6 @@
 #include <linux/err.h>
 
 #include <asm/io.h>
-#include <asm/gpio.h>
 #include <asm/mach-types.h>
 
 #include <mach/msm_fb.h>
diff --git a/arch/arm/mach-msm/include/mach/gpio.h b/arch/arm/mach-msm/include/mach/gpio.h
index 36ad50d..40a8c178 100644
--- a/arch/arm/mach-msm/include/mach/gpio.h
+++ b/arch/arm/mach-msm/include/mach/gpio.h
@@ -1,26 +1 @@
-/*
- * Copyright (C) 2007 Google, Inc.
- * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved.
- * Author: Mike Lockwood <lockwood@android.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __ASM_ARCH_MSM_GPIO_H
-#define __ASM_ARCH_MSM_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
-
-#endif /* __ASM_ARCH_MSM_GPIO_H */
+/* empty */
diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c
index 3e24431..e421b70 100644
--- a/arch/arm/mach-mv78xx0/irq.c
+++ b/arch/arm/mach-mv78xx0/irq.c
@@ -7,12 +7,11 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
-#include <asm/gpio.h>
 #include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
diff --git a/arch/arm/mach-mv78xx0/mpp.c b/arch/arm/mach-mv78xx0/mpp.c
index 59b7686..cf4e494 100644
--- a/arch/arm/mach-mv78xx0/mpp.c
+++ b/arch/arm/mach-mv78xx0/mpp.c
@@ -7,13 +7,12 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mbus.h>
 #include <linux/io.h>
 #include <plat/mpp.h>
-#include <asm/gpio.h>
 #include <mach/hardware.h>
 #include "common.h"
 #include "mpp.h"
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4cd0231..ea5ec0f 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -64,8 +64,25 @@
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_PWM
 
+config MODULE_M28
+	bool
+	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
+	select MXS_HAVE_AMBA_DUART
+	select MXS_HAVE_PLATFORM_AUART
+	select MXS_HAVE_PLATFORM_FEC
+	select MXS_HAVE_PLATFORM_FLEXCAN
+	select MXS_HAVE_PLATFORM_MXS_I2C
+	select MXS_HAVE_PLATFORM_MXS_MMC
+	select MXS_HAVE_PLATFORM_MXSFB
+	select MXS_OCOTP
+
 config MACH_TX28
 	bool "Ka-Ro TX28 module"
 	select MODULE_TX28
 
+config MACH_M28EVK
+	bool "Support DENX M28EVK Platform"
+	select MODULE_M28
+
 endif
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 6c38262..adcfb4e 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -10,6 +10,7 @@
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
 obj-$(CONFIG_MACH_MX28EVK) += mach-mx28evk.o
+obj-$(CONFIG_MACH_M28EVK)    += mach-m28evk.o
 obj-$(CONFIG_MODULE_TX28) += module-tx28.o
 obj-$(CONFIG_MACH_TX28)    += mach-tx28.o
 
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 5dcc59d..3122310 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -738,11 +738,17 @@
 	__raw_writel(BM_CLKCTRL_CPU_INTERRUPT_WAIT,
 			CLKCTRL_BASE_ADDR + HW_CLKCTRL_CPU_SET);
 
-	/* Extra fec clock setting */
-	reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
-	reg &= ~BM_CLKCTRL_ENET_SLEEP;
-	reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
-	__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	/*
+	 * Extra fec clock setting
+	 * The DENX M28 uses an external clock source
+	 * and the clock output must not be enabled
+	 */
+	if (!machine_is_m28evk()) {
+		reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+		reg &= ~BM_CLKCTRL_ENET_SLEEP;
+		reg |= BM_CLKCTRL_ENET_CLK_OUT_EN;
+		__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_ENET);
+	}
 
 	/*
 	 * 480 MHz seems too high to be ssp clock source directly,
diff --git a/arch/arm/mach-mxs/include/mach/gpio.h b/arch/arm/mach-mxs/include/mach/gpio.h
index 828cccc..bb11e63 100644
--- a/arch/arm/mach-mxs/include/mach/gpio.h
+++ b/arch/arm/mach-mxs/include/mach/gpio.h
@@ -20,16 +20,8 @@
 #ifndef __MACH_MXS_GPIO_H__
 #define __MACH_MXS_GPIO_H__
 
-#include <asm-generic/gpio.h>
-
 #define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
 
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-#define gpio_to_irq		__gpio_to_irq
-
 #define irq_to_gpio(irq)	((irq) - MXS_GPIO_IRQ_START)
 
 #endif /* __MACH_MXS_GPIO_H__ */
diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
index 35a89dd27..0582318 100644
--- a/arch/arm/mach-mxs/include/mach/mxs.h
+++ b/arch/arm/mach-mxs/include/mach/mxs.h
@@ -33,6 +33,7 @@
 		0)
 #define cpu_is_mx28()		(					\
 		machine_is_mx28evk() ||					\
+		machine_is_m28evk() ||					\
 		machine_is_tx28() ||					\
 		0)
 
diff --git a/arch/arm/mach-mxs/include/mach/uncompress.h b/arch/arm/mach-mxs/include/mach/uncompress.h
index 7f8bf65..6777674 100644
--- a/arch/arm/mach-mxs/include/mach/uncompress.h
+++ b/arch/arm/mach-mxs/include/mach/uncompress.h
@@ -63,6 +63,7 @@
 		mxs_duart_base = MX23_DUART_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX28EVK:
+	case MACH_TYPE_M28EVK:
 	case MACH_TYPE_TX28:
 		mxs_duart_base = MX28_DUART_BASE_ADDR;
 		break;
diff --git a/arch/arm/mach-mxs/mach-m28evk.c b/arch/arm/mach-mxs/mach-m28evk.c
new file mode 100644
index 0000000..3b1681e
--- /dev/null
+++ b/arch/arm/mach-mxs/mach-m28evk.c
@@ -0,0 +1,366 @@
+/*
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, <sbabic@denx.de>
+ *
+ * based on: mach-mx28_evk.c
+ * Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/irq.h>
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/common.h>
+#include <mach/iomux-mx28.h>
+
+#include "devices-mx28.h"
+
+#define M28EVK_GPIO_USERLED1	MXS_GPIO_NR(3, 16)
+#define M28EVK_GPIO_USERLED2	MXS_GPIO_NR(3, 17)
+
+#define MX28EVK_BL_ENABLE	MXS_GPIO_NR(3, 18)
+#define M28EVK_LCD_ENABLE	MXS_GPIO_NR(3, 28)
+
+#define MX28EVK_MMC0_WRITE_PROTECT	MXS_GPIO_NR(2, 12)
+#define MX28EVK_MMC1_WRITE_PROTECT	MXS_GPIO_NR(0, 28)
+
+static const iomux_cfg_t m28evk_pads[] __initconst = {
+	/* duart */
+	MX28_PAD_AUART0_CTS__DUART_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_RTS__DUART_TX | MXS_PAD_CTRL,
+
+	/* auart0 */
+	MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
+
+	/* auart3 */
+	MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
+	MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
+
+#define MXS_PAD_FEC	(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
+	/* fec0 */
+	MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
+	MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
+	/* fec1 */
+	MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
+	MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
+
+	/* flexcan0 */
+	MX28_PAD_GPMI_RDY2__CAN0_TX,
+	MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+	/* flexcan1 */
+	MX28_PAD_GPMI_CE2N__CAN1_TX,
+	MX28_PAD_GPMI_CE3N__CAN1_RX,
+
+	/* I2C */
+	MX28_PAD_I2C0_SCL__I2C0_SCL,
+	MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+	/* mxsfb (lcdif) */
+	MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
+	MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
+
+	MX28_PAD_LCD_ENABLE__LCD_ENABLE	| MXS_PAD_CTRL,
+	MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MXS_PAD_CTRL,
+
+	/* mmc0 */
+	MX28_PAD_SSP0_DATA0__SSP0_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA1__SSP0_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA2__SSP0_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA3__SSP0_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA4__SSP0_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA5__SSP0_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA6__SSP0_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DATA7__SSP0_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_CMD__SSP0_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_SSP0_SCK__SSP0_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* mmc1 */
+	MX28_PAD_GPMI_D00__SSP1_D0 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D01__SSP1_D1 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D02__SSP1_D2 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D03__SSP1_D3 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D04__SSP1_D4 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D05__SSP1_D5 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D06__SSP1_D6 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_D07__SSP1_D7 |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY1__SSP1_CMD |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT |
+		(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_WRN__SSP1_SCK |
+		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* write protect */
+	MX28_PAD_GPMI_RESETN__GPIO_0_28 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+	/* slot power enable */
+	MX28_PAD_PWM4__GPIO_3_29 |
+		(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
+
+	/* led */
+	MX28_PAD_PWM0__GPIO_3_16 | MXS_PAD_CTRL,
+	MX28_PAD_PWM1__GPIO_3_17 | MXS_PAD_CTRL,
+
+	/* nand */
+	MX28_PAD_GPMI_D00__GPMI_D0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D01__GPMI_D1 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D02__GPMI_D2 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D03__GPMI_D3 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D04__GPMI_D4 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D05__GPMI_D5 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D06__GPMI_D6 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_D07__GPMI_D7 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_CE0N__GPMI_CE0N |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDY0__GPMI_READY0 |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_NOPULL),
+	MX28_PAD_GPMI_RDN__GPMI_RDN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_WRN__GPMI_WRN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_ALE__GPMI_ALE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_CLE__GPMI_CLE |
+		(MXS_PAD_4MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+	MX28_PAD_GPMI_RESETN__GPMI_RESETN |
+		(MXS_PAD_12MA | MXS_PAD_1V8 | MXS_PAD_PULLUP),
+
+	/* Backlight */
+	MX28_PAD_PWM3__GPIO_3_28 | MXS_PAD_CTRL,
+};
+
+/* led */
+static const struct gpio_led m28evk_leds[] __initconst = {
+	{
+		.name = "user-led1",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED1,
+	},
+	{
+		.name = "user-led2",
+		.default_trigger = "heartbeat",
+		.gpio = M28EVK_GPIO_USERLED2,
+	},
+};
+
+static const struct gpio_led_platform_data m28evk_led_data __initconst = {
+	.leds = m28evk_leds,
+	.num_leds = ARRAY_SIZE(m28evk_leds),
+};
+
+static struct fec_platform_data mx28_fec_pdata[] __initdata = {
+	{
+		/* fec0 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	}, {
+		/* fec1 */
+		.phy = PHY_INTERFACE_MODE_RMII,
+	},
+};
+
+static int __init m28evk_fec_get_mac(void)
+{
+	int i;
+	u32 val;
+	const u32 *ocotp = mxs_get_ocotp();
+
+	if (!ocotp) {
+		pr_err("%s: timeout when reading fec mac from OCOTP\n",
+			__func__);
+		return -ETIMEDOUT;
+	}
+
+	/*
+	 * OCOTP only stores the last 4 octets for each mac address,
+	 * so hard-code DENX OUI (C0:E5:4E) here.
+	 */
+	for (i = 0; i < 2; i++) {
+		val = ocotp[i * 4];
+		mx28_fec_pdata[i].mac[0] = 0xC0;
+		mx28_fec_pdata[i].mac[1] = 0xE5;
+		mx28_fec_pdata[i].mac[2] = 0x4E;
+		mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
+		mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
+		mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
+	}
+
+	return 0;
+}
+
+/* mxsfb (lcdif) */
+static struct fb_videomode m28evk_video_modes[] = {
+	{
+		.name		= "Ampire AM-800480R2TMQW-T01H",
+		.refresh	= 60,
+		.xres		= 800,
+		.yres		= 480,
+		.pixclock	= 30066, /* picosecond (33.26 MHz) */
+		.left_margin	= 0,
+		.right_margin	= 256,
+		.upper_margin	= 0,
+		.lower_margin	= 45,
+		.hsync_len	= 1,
+		.vsync_len	= 1,
+		.sync		= FB_SYNC_DATA_ENABLE_HIGH_ACT,
+	},
+};
+
+static const struct mxsfb_platform_data m28evk_mxsfb_pdata __initconst = {
+	.mode_list	= m28evk_video_modes,
+	.mode_count	= ARRAY_SIZE(m28evk_video_modes),
+	.default_bpp	= 16,
+	.ld_intf_width	= STMLCDIF_18BIT,
+};
+
+static struct at24_platform_data m28evk_eeprom = {
+	.byte_len = 16384,
+	.page_size = 32,
+	.flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info m28_stk5v3_i2c_boardinfo[] __initdata = {
+	{
+		I2C_BOARD_INFO("at24", 0x51),	/* E0=1, E1=0, E2=0 */
+		.platform_data = &m28evk_eeprom,
+	},
+};
+
+static struct mxs_mmc_platform_data m28evk_mmc_pdata[] __initdata = {
+	{
+		/* mmc0 */
+		.wp_gpio = MX28EVK_MMC0_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	}, {
+		/* mmc1 */
+		.wp_gpio = MX28EVK_MMC1_WRITE_PROTECT,
+		.flags = SLOTF_8_BIT_CAPABLE,
+	},
+};
+
+static void __init m28evk_init(void)
+{
+	mxs_iomux_setup_multiple_pads(m28evk_pads, ARRAY_SIZE(m28evk_pads));
+
+	mx28_add_duart();
+	mx28_add_auart0();
+	mx28_add_auart3();
+
+	if (!m28evk_fec_get_mac()) {
+		mx28_add_fec(0, &mx28_fec_pdata[0]);
+		mx28_add_fec(1, &mx28_fec_pdata[1]);
+	}
+
+	mx28_add_flexcan(0, NULL);
+	mx28_add_flexcan(1, NULL);
+
+	mx28_add_mxsfb(&m28evk_mxsfb_pdata);
+
+	mx28_add_mxs_mmc(0, &m28evk_mmc_pdata[0]);
+	mx28_add_mxs_mmc(1, &m28evk_mmc_pdata[1]);
+
+	gpio_led_register_device(0, &m28evk_led_data);
+
+	/* I2C */
+	mx28_add_mxs_i2c(0);
+	i2c_register_board_info(0, m28_stk5v3_i2c_boardinfo,
+			ARRAY_SIZE(m28_stk5v3_i2c_boardinfo));
+}
+
+static void __init m28evk_timer_init(void)
+{
+	mx28_clocks_init();
+}
+
+static struct sys_timer m28evk_timer = {
+	.init	= m28evk_timer_init,
+};
+
+MACHINE_START(M28EVK, "DENX M28 EVK")
+	.map_io		= mx28_map_io,
+	.init_irq	= mx28_init_irq,
+	.init_machine	= m28evk_init,
+	.timer		= &m28evk_timer,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 398a75f..0cbb74c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -27,6 +27,7 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
+#include <plat/gpio-nomadik.h>
 #include <plat/mtu.h>
 
 #include <mach/setup.h>
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index ac58e3b..dc67717 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -21,8 +21,8 @@
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
 
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <asm/mach/map.h>
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
index abfe25a..0fc2f6f 100644
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ b/arch/arm/mach-nomadik/i2c-8815nhk.c
@@ -3,8 +3,8 @@
 #include <linux/i2c.h>
 #include <linux/i2c-algo-bit.h>
 #include <linux/i2c-gpio.h>
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
+#include <plat/gpio-nomadik.h>
 
 /*
  * There are two busses in the 8815NHK.
diff --git a/arch/arm/mach-nomadik/include/mach/gpio.h b/arch/arm/mach-nomadik/include/mach/gpio.h
index 7a81a04..efdde0a 100644
--- a/arch/arm/mach-nomadik/include/mach/gpio.h
+++ b/arch/arm/mach-nomadik/include/mach/gpio.h
@@ -1,6 +1,4 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H
 
-#include <plat/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index eb36b25..4ea60e2 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -11,7 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -30,7 +30,6 @@
 
 #include <plat/io.h>
 #include <plat/board-ams-delta.h>
-#include <mach/gpio.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index 999789c..31e089b 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -28,7 +28,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 23cc9e4..05c6e9d 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -12,7 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -22,7 +22,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index f2fc43d..da0e37d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -11,13 +11,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include <linux/i2c/tps65010.h>
 
 #include <plat/mmc.h>
-#include <mach/gpio.h>
 
 #include "board-h2.h"
 
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index 6c70c28..c2e2791 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -18,7 +18,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
@@ -32,7 +32,6 @@
 #include <linux/smc91x.h>
 
 #include <mach/hardware.h>
-#include <asm/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 2098525..f8242aa 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -11,13 +11,12 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include <linux/i2c/tps65010.h>
 
 #include <plat/mmc.h>
-#include <mach/gpio.h>
 
 #include "board-h3.h"
 
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 8e2b64a..8f5b6af 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -13,7 +13,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/major.h>
@@ -34,7 +34,6 @@
 #include <asm/setup.h>
 #include <asm/page.h>
 #include <mach/hardware.h>
-#include <asm/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
index e81ead1..fcd1a3c 100644
--- a/arch/arm/mach-omap1/board-htcherald.c
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -23,7 +23,6 @@
  * 02110-1301, USA.
  *
  */
-
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index 8b03459..c2234ca 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -15,7 +15,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -34,7 +34,6 @@
 #include <plat/mux.h>
 #include <plat/flash.h>
 #include <plat/fpga.h>
-#include <mach/gpio.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 6825635..02789c5 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/mutex.h>
@@ -26,7 +26,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 44b8e93..e4dca1d 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -25,7 +25,7 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -42,7 +42,6 @@
 #include <linux/i2c/tps65010.h>
 
 #include <mach/hardware.h>
-#include <asm/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 3d8cd90..50c4e39 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -16,7 +16,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -33,7 +33,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d0eefe8..273771c 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -12,6 +12,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -30,7 +31,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/led.h>
-#include <mach/gpio.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 98e79bc..de36ade 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -32,7 +33,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index ad3a156..04b1bef 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -28,7 +28,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/tc.h>
-#include <mach/gpio.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
 #include <plat/flash.h>
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index e8ddd86..b59f788 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -12,11 +12,11 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
 #include <plat/mmc.h>
-#include <mach/gpio.h>
 #include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 602b55c..2bea941 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -14,7 +14,7 @@
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/input.h>
@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/dma.h>
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 8016515..940faed 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -33,7 +34,6 @@
 
 #include <plat/board-voiceblue.h>
 #include <plat/common.h>
-#include <mach/gpio.h>
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 36f26c3..7c50ecf 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -10,6 +10,7 @@
  */
 
 #include <linux/dma-mapping.h>
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,7 +25,6 @@
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
-#include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index cddbf8b..0a17a1a 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/types.h>
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/device.h>
@@ -28,7 +29,6 @@
 #include <asm/mach/irq.h>
 
 #include <plat/fpga.h>
-#include <mach/gpio.h>
 
 static void fpga_mask_irq(struct irq_data *d)
 {
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index e2b9c90..e5b104b 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -35,7 +35,7 @@
  * with this program; if not, write  to the Free Software Foundation, Inc.,
  * 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/sched.h>
@@ -45,7 +45,6 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <mach/gpio.h>
 #include <plat/cpu.h>
 
 #define IRQ_BANK(irq) ((irq) >> 5)
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index b4f9be5..4b818eb 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -9,6 +9,7 @@
  * The "surfer" expansion board and H2 sample board also have two-color
  * green+red LEDs (in parallel), used here for timer and idle indicators.
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel_stat.h>
 #include <linux/sched.h>
@@ -20,7 +21,6 @@
 #include <asm/mach-types.h>
 
 #include <plat/fpga.h>
-#include <mach/gpio.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/leds-osk.c b/arch/arm/mach-omap1/leds-osk.c
index 499d7ad..da09f43 100644
--- a/arch/arm/mach-omap1/leds-osk.c
+++ b/arch/arm/mach-omap1/leds-osk.c
@@ -3,14 +3,13 @@
  *
  * LED driver for OSK with optional Mistral QVGA board
  */
+#include <linux/gpio.h>
 #include <linux/init.h>
 
 #include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <mach/gpio.h>
-
 #include "leds.h"
 
 
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 22eb11d..ae6dd93 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -3,13 +3,13 @@
  *
  * OMAP LEDs dispatcher
  */
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/leds.h>
 #include <asm/mach-types.h>
 
-#include <mach/gpio.h>
 #include <plat/mux.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 550ca9d..93ae8f2 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,7 +24,6 @@
 
 #include <plat/board.h>
 #include <plat/mux.h>
-#include <mach/gpio.h>
 #include <plat/fpga.h>
 
 #include "pm.h"
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2564269..4431ad3 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -15,7 +15,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
@@ -25,7 +25,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a58c6ba..82421a4 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio.h>
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/common.h>
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index edf752b..abe8c7e 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -10,7 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -34,7 +34,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/mcspi.h>
-#include <mach/gpio.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index 1077ad6..5391079 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -8,7 +8,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -26,7 +26,6 @@
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mcbsp.h>
-#include <mach/gpio.h>
 #include <plat/mmc.h>
 #include <plat/dma.h>
 #include <plat/omap_hwmod.h>
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
index 88432ab..4b79a80 100644
--- a/arch/arm/mach-orion5x/db88f5281-setup.c
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -9,7 +9,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -21,7 +21,6 @@
 #include <linux/mv643xx_eth.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index 9e5c166..343f60e 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -13,7 +13,7 @@
  * License, or (at your option) any later version.
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/delay.h>
@@ -30,7 +30,6 @@
 #include <linux/phy.h>
 #include <linux/marvell_phy.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
index 43cf8bc..b1b45ff 100644
--- a/arch/arm/mach-orion5x/irq.c
+++ b/arch/arm/mach-orion5x/irq.c
@@ -9,12 +9,11 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
-#include <asm/gpio.h>
 #include <mach/bridge-regs.h>
 #include <plat/irq.h>
 #include "common.h"
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 9115511..d3cd3f6 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -7,7 +7,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -21,7 +21,6 @@
 #include <linux/serial_reg.h>
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
index b3356ad..201ae36 100644
--- a/arch/arm/mach-orion5x/mv2120-setup.c
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -7,7 +7,7 @@
  * published by the Free Software Foundation; either version 2 of the
  * License, or (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <mach/orion5x.h>
 #include "common.h"
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
index 8c87666..ebd6767 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -7,7 +7,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -18,7 +18,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
index 994644f..05db2d3 100644
--- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -7,7 +7,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -19,7 +19,6 @@
 #include <linux/i2c.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
index 1903d25..e47fa05 100644
--- a/arch/arm/mach-orion5x/rd88f5182-setup.c
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -9,7 +9,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -20,7 +20,6 @@
 #include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
index e06fdae..6431725 100644
--- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -7,7 +7,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -21,7 +21,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/leds.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
index 3061832..29f1526 100644
--- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -8,7 +8,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -20,7 +20,6 @@
 #include <linux/i2c.h>
 #include <linux/serial_reg.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
index 3dbcd5e..31e51f9 100644
--- a/arch/arm/mach-orion5x/ts209-setup.c
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -8,7 +8,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -23,7 +23,6 @@
 #include <linux/serial_reg.h>
 #include <linux/ata_platform.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
index 23c9e2e..0fbcc14 100644
--- a/arch/arm/mach-orion5x/ts409-setup.c
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -11,7 +11,7 @@
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -25,7 +25,6 @@
 #include <linux/i2c.h>
 #include <linux/serial_reg.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
index 1c63a76..b8be7d8 100644
--- a/arch/arm/mach-orion5x/wnr854t-setup.c
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -5,7 +5,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -17,7 +17,6 @@
 #include <linux/ethtool.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 4fd9f18..faf81a0 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -5,7 +5,7 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -20,7 +20,6 @@
 #include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
-#include <asm/gpio.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/pci.h>
 #include <mach/orion5x.h>
diff --git a/arch/arm/mach-pnx4008/gpio.c b/arch/arm/mach-pnx4008/gpio.c
index f219914..d3e71d3 100644
--- a/arch/arm/mach-pnx4008/gpio.c
+++ b/arch/arm/mach-pnx4008/gpio.c
@@ -13,14 +13,13 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pnx4008.h>
 
 /* register definitions */
 #define PIO_VA_BASE	IO_ADDRESS(PNX4008_PIO_BASE)
diff --git a/arch/arm/mach-pnx4008/include/mach/gpio.h b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
similarity index 98%
rename from arch/arm/mach-pnx4008/include/mach/gpio.h
rename to arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
index 9591467..41027dd 100644
--- a/arch/arm/mach-pnx4008/include/mach/gpio.h
+++ b/arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-pnx4008/include/mach/gpio.h
+ * arch/arm/mach-pnx4008/include/mach/gpio-pnx4008.h
  *
  * PNX4008 GPIO driver - header file
  *
diff --git a/arch/arm/mach-pnx4008/serial.c b/arch/arm/mach-pnx4008/serial.c
index f40961e..374c138 100644
--- a/arch/arm/mach-pnx4008/serial.c
+++ b/arch/arm/mach-pnx4008/serial.c
@@ -9,7 +9,6 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
 #include <linux/kernel.h>
 #include <linux/types.h>
 #include <linux/io.h>
@@ -19,8 +18,8 @@
 
 #include <linux/serial_core.h>
 #include <linux/serial_reg.h>
-#include <mach/gpio.h>
 
+#include <mach/gpio-pnx4008.h>
 #include <mach/clock.h>
 
 #define UART_3		0
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
index 93f59f8..be75147 100644
--- a/arch/arm/mach-pxa/cm-x255.c
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -11,7 +11,6 @@
 
 #include <linux/platform_device.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/nand-gpio.h>
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index f5d91ef..5432ecb 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -16,6 +16,7 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -26,7 +27,6 @@
 #include <asm/mach-types.h>
 
 #include <mach/reset.h>
-#include <mach/gpio.h>
 #include <mach/smemc.h>
 #include <mach/pxa3xx-regs.h>
 
diff --git a/arch/arm/mach-pxa/include/mach/gpio-pxa.h b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
new file mode 100644
index 0000000..41b4c93
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio-pxa.h
@@ -0,0 +1,133 @@
+/*
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __MACH_PXA_GPIO_PXA_H
+#define __MACH_PXA_GPIO_PXA_H
+
+#include <mach/irqs.h>
+#include <mach/hardware.h>
+
+#define GPIO_REGS_VIRT	io_p2v(0x40E00000)
+
+#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
+#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
+
+/* GPIO Pin Level Registers */
+#define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
+#define GPLR1		GPIO_REG(BANK_OFF(1) + 0x00)
+#define GPLR2		GPIO_REG(BANK_OFF(2) + 0x00)
+#define GPLR3		GPIO_REG(BANK_OFF(3) + 0x00)
+
+/* GPIO Pin Direction Registers */
+#define GPDR0		GPIO_REG(BANK_OFF(0) + 0x0c)
+#define GPDR1		GPIO_REG(BANK_OFF(1) + 0x0c)
+#define GPDR2		GPIO_REG(BANK_OFF(2) + 0x0c)
+#define GPDR3		GPIO_REG(BANK_OFF(3) + 0x0c)
+
+/* GPIO Pin Output Set Registers */
+#define GPSR0		GPIO_REG(BANK_OFF(0) + 0x18)
+#define GPSR1		GPIO_REG(BANK_OFF(1) + 0x18)
+#define GPSR2		GPIO_REG(BANK_OFF(2) + 0x18)
+#define GPSR3		GPIO_REG(BANK_OFF(3) + 0x18)
+
+/* GPIO Pin Output Clear Registers */
+#define GPCR0		GPIO_REG(BANK_OFF(0) + 0x24)
+#define GPCR1		GPIO_REG(BANK_OFF(1) + 0x24)
+#define GPCR2		GPIO_REG(BANK_OFF(2) + 0x24)
+#define GPCR3		GPIO_REG(BANK_OFF(3) + 0x24)
+
+/* GPIO Rising Edge Detect Registers */
+#define GRER0		GPIO_REG(BANK_OFF(0) + 0x30)
+#define GRER1		GPIO_REG(BANK_OFF(1) + 0x30)
+#define GRER2		GPIO_REG(BANK_OFF(2) + 0x30)
+#define GRER3		GPIO_REG(BANK_OFF(3) + 0x30)
+
+/* GPIO Falling Edge Detect Registers */
+#define GFER0		GPIO_REG(BANK_OFF(0) + 0x3c)
+#define GFER1		GPIO_REG(BANK_OFF(1) + 0x3c)
+#define GFER2		GPIO_REG(BANK_OFF(2) + 0x3c)
+#define GFER3		GPIO_REG(BANK_OFF(3) + 0x3c)
+
+/* GPIO Edge Detect Status Registers */
+#define GEDR0		GPIO_REG(BANK_OFF(0) + 0x48)
+#define GEDR1		GPIO_REG(BANK_OFF(1) + 0x48)
+#define GEDR2		GPIO_REG(BANK_OFF(2) + 0x48)
+#define GEDR3		GPIO_REG(BANK_OFF(3) + 0x48)
+
+/* GPIO Alternate Function Select Registers */
+#define GAFR0_L		GPIO_REG(0x0054)
+#define GAFR0_U		GPIO_REG(0x0058)
+#define GAFR1_L		GPIO_REG(0x005C)
+#define GAFR1_U		GPIO_REG(0x0060)
+#define GAFR2_L		GPIO_REG(0x0064)
+#define GAFR2_U		GPIO_REG(0x0068)
+#define GAFR3_L		GPIO_REG(0x006C)
+#define GAFR3_U		GPIO_REG(0x0070)
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#define GPLR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
+#define GPDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
+#define GRER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
+#define GFER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
+#define GEDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
+#define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
+
+
+#define NR_BUILTIN_GPIO		PXA_GPIO_IRQ_NUM
+
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+#ifdef CONFIG_CPU_PXA26x
+/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
+ * as well as their Alternate Function value being '1' for GPIO in GAFRx.
+ */
+static inline int __gpio_is_inverted(unsigned gpio)
+{
+	return cpu_is_pxa25x() && gpio > 85;
+}
+#else
+static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
+#endif
+
+/*
+ * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
+ * function of a GPIO, and GPDRx cannot be altered once configured. It
+ * is attributed as "occupied" here (I know this terminology isn't
+ * accurate, you are welcome to propose a better one :-)
+ */
+static inline int __gpio_is_occupied(unsigned gpio)
+{
+	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
+		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
+		int dir = GPDR(gpio) & GPIO_bit(gpio);
+
+		if (__gpio_is_inverted(gpio))
+			return af != 1 || dir == 0;
+		else
+			return af != 0 || dir != 0;
+	} else
+		return GPDR(gpio) & GPIO_bit(gpio);
+}
+
+#include <plat/gpio-pxa.h>
+#endif /* __MACH_PXA_GPIO_PXA_H */
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index c463950..004cade 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -24,84 +24,10 @@
 #ifndef __ASM_ARCH_PXA_GPIO_H
 #define __ASM_ARCH_PXA_GPIO_H
 
-#include <mach/irqs.h>
-#include <mach/hardware.h>
 #include <asm-generic/gpio.h>
+/* The defines for the driver are needed for the accelerated accessors */
+#include "gpio-pxa.h"
 
-#define GPIO_REGS_VIRT	io_p2v(0x40E00000)
-
-#define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
-#define GPIO_REG(x)	(*(volatile u32 *)(GPIO_REGS_VIRT + (x)))
-
-/* GPIO Pin Level Registers */
-#define GPLR0		GPIO_REG(BANK_OFF(0) + 0x00)
-#define GPLR1		GPIO_REG(BANK_OFF(1) + 0x00)
-#define GPLR2		GPIO_REG(BANK_OFF(2) + 0x00)
-#define GPLR3		GPIO_REG(BANK_OFF(3) + 0x00)
-
-/* GPIO Pin Direction Registers */
-#define GPDR0		GPIO_REG(BANK_OFF(0) + 0x0c)
-#define GPDR1		GPIO_REG(BANK_OFF(1) + 0x0c)
-#define GPDR2		GPIO_REG(BANK_OFF(2) + 0x0c)
-#define GPDR3		GPIO_REG(BANK_OFF(3) + 0x0c)
-
-/* GPIO Pin Output Set Registers */
-#define GPSR0		GPIO_REG(BANK_OFF(0) + 0x18)
-#define GPSR1		GPIO_REG(BANK_OFF(1) + 0x18)
-#define GPSR2		GPIO_REG(BANK_OFF(2) + 0x18)
-#define GPSR3		GPIO_REG(BANK_OFF(3) + 0x18)
-
-/* GPIO Pin Output Clear Registers */
-#define GPCR0		GPIO_REG(BANK_OFF(0) + 0x24)
-#define GPCR1		GPIO_REG(BANK_OFF(1) + 0x24)
-#define GPCR2		GPIO_REG(BANK_OFF(2) + 0x24)
-#define GPCR3		GPIO_REG(BANK_OFF(3) + 0x24)
-
-/* GPIO Rising Edge Detect Registers */
-#define GRER0		GPIO_REG(BANK_OFF(0) + 0x30)
-#define GRER1		GPIO_REG(BANK_OFF(1) + 0x30)
-#define GRER2		GPIO_REG(BANK_OFF(2) + 0x30)
-#define GRER3		GPIO_REG(BANK_OFF(3) + 0x30)
-
-/* GPIO Falling Edge Detect Registers */
-#define GFER0		GPIO_REG(BANK_OFF(0) + 0x3c)
-#define GFER1		GPIO_REG(BANK_OFF(1) + 0x3c)
-#define GFER2		GPIO_REG(BANK_OFF(2) + 0x3c)
-#define GFER3		GPIO_REG(BANK_OFF(3) + 0x3c)
-
-/* GPIO Edge Detect Status Registers */
-#define GEDR0		GPIO_REG(BANK_OFF(0) + 0x48)
-#define GEDR1		GPIO_REG(BANK_OFF(1) + 0x48)
-#define GEDR2		GPIO_REG(BANK_OFF(2) + 0x48)
-#define GEDR3		GPIO_REG(BANK_OFF(3) + 0x48)
-
-/* GPIO Alternate Function Select Registers */
-#define GAFR0_L		GPIO_REG(0x0054)
-#define GAFR0_U		GPIO_REG(0x0058)
-#define GAFR1_L		GPIO_REG(0x005C)
-#define GAFR1_U		GPIO_REG(0x0060)
-#define GAFR2_L		GPIO_REG(0x0064)
-#define GAFR2_U		GPIO_REG(0x0068)
-#define GAFR3_L		GPIO_REG(0x006C)
-#define GAFR3_U		GPIO_REG(0x0070)
-
-/* More handy macros.  The argument is a literal GPIO number. */
-
-#define GPIO_bit(x)	(1 << ((x) & 0x1f))
-
-#define GPLR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x00)
-#define GPDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x0c)
-#define GPSR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x18)
-#define GPCR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x24)
-#define GRER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x30)
-#define GFER(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x3c)
-#define GEDR(x)		GPIO_REG(BANK_OFF((x) >> 5) + 0x48)
-#define GAFR(x)		GPIO_REG(0x54 + (((x) & 0x70) >> 2))
-
-
-#define NR_BUILTIN_GPIO		PXA_GPIO_IRQ_NUM
-
-#define gpio_to_bank(gpio)	((gpio) >> 5)
 #define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
 
 static inline int irq_to_gpio(unsigned int irq)
@@ -118,37 +44,5 @@
 	return -1;
 }
 
-#ifdef CONFIG_CPU_PXA26x
-/* GPIO86/87/88/89 on PXA26x have their direction bits in GPDR2 inverted,
- * as well as their Alternate Function value being '1' for GPIO in GAFRx.
- */
-static inline int __gpio_is_inverted(unsigned gpio)
-{
-	return cpu_is_pxa25x() && gpio > 85;
-}
-#else
-static inline int __gpio_is_inverted(unsigned gpio) { return 0; }
-#endif
-
-/*
- * On PXA25x and PXA27x, GAFRx and GPDRx together decide the alternate
- * function of a GPIO, and GPDRx cannot be altered once configured. It
- * is attributed as "occupied" here (I know this terminology isn't
- * accurate, you are welcome to propose a better one :-)
- */
-static inline int __gpio_is_occupied(unsigned gpio)
-{
-	if (cpu_is_pxa27x() || cpu_is_pxa25x()) {
-		int af = (GAFR(gpio) >> ((gpio & 0xf) * 2)) & 0x3;
-		int dir = GPDR(gpio) & GPIO_bit(gpio);
-
-		if (__gpio_is_inverted(gpio))
-			return af != 1 || dir == 0;
-		else
-			return af != 0 || dir != 0;
-	} else
-		return GPDR(gpio) & GPIO_bit(gpio);
-}
-
 #include <plat/gpio.h>
 #endif
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
index 2a5726c..b6238cb 100644
--- a/arch/arm/mach-pxa/include/mach/littleton.h
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -1,7 +1,7 @@
 #ifndef __ASM_ARCH_LITTLETON_H
 #define __ASM_ARCH_LITTLETON_H
 
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 
 #define LITTLETON_ETH_PHYS	0x30000000
 
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index ca60757..8d9200f 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -11,7 +11,6 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
@@ -23,7 +22,7 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 16df0fc0..64540d9 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -12,7 +12,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -39,7 +39,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/gpio.h>
 #include <mach/lpd270.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index a8c696b..c48ce6d 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -11,6 +11,7 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -42,7 +43,6 @@
 #include <asm/hardware/sa1111.h>
 
 #include <mach/pxa25x.h>
-#include <mach/gpio.h>
 #include <mach/audio.h>
 #include <mach/lubbock.h>
 #include <mach/udc.h>
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index cc6e14f..0567d39 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -12,7 +12,7 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/syscore_ops.h>
@@ -43,7 +43,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/pxa27x.h>
-#include <mach/gpio.h>
 #include <mach/mainstone.h>
 #include <mach/audio.h>
 #include <mach/pxafb.h>
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b27544b..43a5f68 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -12,15 +12,15 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/syscore_ops.h>
 
-#include <mach/gpio.h>
 #include <mach/pxa2xx-regs.h>
 #include <mach/mfp-pxa2xx.h>
+#include <mach/gpio-pxa.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 6d5b7e0..9a9c539 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -19,7 +19,7 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -28,7 +28,6 @@
 
 #include <media/soc_camera.h>
 
-#include <asm/gpio.h>
 #include <mach/camera.h>
 #include <asm/mach/map.h>
 #include <mach/pxa27x.h>
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 9c434d2..8746e10 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
  * initialization stuff for PXA machines which can be overridden later if
  * need be.
  */
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -23,12 +24,12 @@
 #include <linux/suspend.h>
 #include <linux/syscore_ops.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/pxa25x.h>
 #include <mach/reset.h>
 #include <mach/pm.h>
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9d2400b..2bb5cf8 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -11,6 +11,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -20,13 +21,13 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/i2c/pxa-i2c.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/map.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/suspend.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/pxa27x.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index b5cd9e5..f940a13 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -12,7 +12,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -26,7 +25,7 @@
 #include <asm/mach/map.h>
 #include <asm/suspend.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/reset.h>
 #include <mach/ohci.h>
diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c
index 0ee166b..51371b3 100644
--- a/arch/arm/mach-pxa/pxa95x.c
+++ b/arch/arm/mach-pxa/pxa95x.c
@@ -9,7 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -21,7 +20,7 @@
 #include <linux/syscore_ops.h>
 
 #include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 #include <mach/pxa3xx-regs.h>
 #include <mach/pxa930.h>
 #include <mach/reset.h>
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 5ce3403..3c988b6f 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -9,12 +9,13 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  publishhed by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/i2c.h>
 #include <linux/i2c/pxa-i2c.h>
 #include <linux/mfd/88pm860x.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -23,7 +24,6 @@
 #include <mach/hardware.h>
 #include <mach/mfp.h>
 #include <mach/mfp-pxa930.h>
-#include <mach/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-realview/include/mach/gpio.h b/arch/arm/mach-realview/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-realview/include/mach/gpio.h
+++ b/arch/arm/mach-realview/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index f7f6b07..6fac70f 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -11,11 +11,6 @@
  * published by the Free Software Foundation.
 */
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* some boards require extra gpio capacity to support external
  * devices that need GPIO.
  */
@@ -28,7 +23,6 @@
 #define ARCH_NR_GPIOS	(256 + CONFIG_S3C24XX_GPIO_EXTRA)
 #endif
 
-#include <asm-generic/gpio.h>
 #include <mach/gpio-nrs.h>
 #include <mach/gpio-fns.h>
 
diff --git a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
index 97e42bf..fc897d3 100644
--- a/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
+++ b/arch/arm/mach-s3c2410/include/mach/h1940-latch.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARCH_H1940_LATCH_H
 #define __ASM_ARCH_H1940_LATCH_H
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #define H1940_LATCH_GPIO(x)		(S3C_GPIO_END + (x))
 
diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c
index a1a7176..38058af 100644
--- a/arch/arm/mach-s3c2443/clock.c
+++ b/arch/arm/mach-s3c2443/clock.c
@@ -128,7 +128,7 @@
 		unsigned long clkcon0;
 
 		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK;
+		clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK;
 		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
 		__raw_writel(clkcon0, S3C2443_CLKDIV0);
 	}
diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c
index 8dc0576..c704783 100644
--- a/arch/arm/mach-s3c64xx/cpu.c
+++ b/arch/arm/mach-s3c64xx/cpu.c
@@ -44,16 +44,16 @@
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x36400000,
-		.idmask		= 0xfffff000,
+		.idcode		= S3C6400_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6400_map_io,
 		.init_clocks	= s3c6400_init_clocks,
 		.init_uarts	= s3c6400_init_uarts,
 		.init		= s3c6400_init,
 		.name		= name_s3c6400,
 	}, {
-		.idcode		= 0x36410100,
-		.idmask		= 0xffffff00,
+		.idcode		= S3C6410_CPU_ID,
+		.idmask		= S3C64XX_CPU_MASK,
 		.map_io		= s3c6410_map_io,
 		.init_clocks	= s3c6410_init_clocks,
 		.init_uarts	= s3c6410_init_uarts,
@@ -141,23 +141,15 @@
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 	iotable_init(mach_desc, size);
 	init_consistent_dma_size(SZ_8M);
 
-	idcode = __raw_readl(S3C_VA_SYS + 0x118);
-	if (!idcode) {
-		/* S3C6400 has the ID register in a different place,
-		 * and needs a write before it can be read. */
+	/* detect cpu id */
+	s3c64xx_init_cpu();
 
-		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
-		idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
-	}
-
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
 
 static __init int s3c64xx_sysdev_init(void)
diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio.h b/arch/arm/mach-s3c64xx/include/mach/gpio.h
index 0d46e99..6e34c2f 100644
--- a/arch/arm/mach-s3c64xx/include/mach/gpio.h
+++ b/arch/arm/mach-s3c64xx/include/mach/gpio.h
@@ -12,11 +12,6 @@
  * published by the Free Software Foundation.
 */
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* GPIO bank sizes */
 #define S3C64XX_GPIO_A_NR	(8)
 #define S3C64XX_GPIO_B_NR	(7)
@@ -96,5 +91,3 @@
 #define BOARD_NR_GPIOS 16
 
 #define ARCH_NR_GPIOS	(GPIO_BOARD_START + BOARD_NR_GPIOS)
-
-#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c
index dcf2d73..7b66ede 100644
--- a/arch/arm/mach-s3c64xx/mach-smdk6410.c
+++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c
@@ -262,45 +262,6 @@
 	.cols		= 8,
 };
 
-static int smdk6410_backlight_init(struct device *dev)
-{
-	int ret;
-
-	ret = gpio_request(S3C64XX_GPF(15), "Backlight");
-	if (ret) {
-		printk(KERN_ERR "failed to request GPF for PWM-OUT1\n");
-		return ret;
-	}
-
-	/* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2));
-
-	return 0;
-}
-
-static void smdk6410_backlight_exit(struct device *dev)
-{
-	s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT);
-	gpio_free(S3C64XX_GPF(15));
-}
-
-static struct platform_pwm_backlight_data smdk6410_backlight_data = {
-	.pwm_id		= 1,
-	.max_brightness	= 255,
-	.dft_brightness	= 255,
-	.pwm_period_ns	= 78770,
-	.init		= smdk6410_backlight_init,
-	.exit		= smdk6410_backlight_exit,
-};
-
-static struct platform_device smdk6410_backlight_device = {
-	.name		= "pwm-backlight",
-	.dev		= {
-		.parent		= &s3c_device_timer[1].dev,
-		.platform_data	= &smdk6410_backlight_data,
-	},
-};
-
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
diff --git a/arch/arm/mach-s5p64x0/dev-spi.c b/arch/arm/mach-s5p64x0/dev-spi.c
index ac825e8..1fd9c79 100644
--- a/arch/arm/mach-s5p64x0/dev-spi.c
+++ b/arch/arm/mach-s5p64x0/dev-spi.c
@@ -21,6 +21,7 @@
 #include <mach/regs-clock.h>
 #include <mach/spi-clocks.h>
 
+#include <plat/cpu.h>
 #include <plat/s3c64xx-spi.h>
 #include <plat/gpio-cfg.h>
 
@@ -185,11 +186,8 @@
 
 void __init s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs)
 {
-	unsigned int id;
 	struct s3c64xx_spi_info *pd;
 
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
 	/* Reject invalid configuration */
 	if (!num_cs || src_clk_nr < 0
 			|| src_clk_nr > S5P64X0_SPI_SRCCLK_SCLK) {
@@ -199,7 +197,7 @@
 
 	switch (cntrlr) {
 	case 0:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi0_pdata;
 		else
 			pd = &s5p6440_spi0_pdata;
@@ -207,7 +205,7 @@
 		s5p64x0_device_spi0.dev.platform_data = pd;
 		break;
 	case 1:
-		if (id == 0x50000)
+		if (soc_is_s5p6450())
 			pd = &s5p6450_spi1_pdata;
 		else
 			pd = &s5p6440_spi1_pdata;
diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c
index d7ad944..0e5b3e6 100644
--- a/arch/arm/mach-s5p64x0/dma.c
+++ b/arch/arm/mach-s5p64x0/dma.c
@@ -28,6 +28,7 @@
 #include <mach/irqs.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/s3c-pl330-pdata.h>
 
@@ -133,11 +134,7 @@
 
 static int __init s5p64x0_dma_init(void)
 {
-	unsigned int id;
-
-	id = __raw_readl(S5P64X0_SYS_ID) & 0xFF000;
-
-	if (id == 0x50000)
+	if (soc_is_s5p6450())
 		s5p64x0_device_pdma.dev.platform_data = &s5p6450_pdma_pdata;
 	else
 		s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata;
diff --git a/arch/arm/mach-s5p64x0/gpiolib.c b/arch/arm/mach-s5p64x0/gpiolib.c
index e7fb3b0..700dac6 100644
--- a/arch/arm/mach-s5p64x0/gpiolib.c
+++ b/arch/arm/mach-s5p64x0/gpiolib.c
@@ -19,6 +19,7 @@
 #include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <plat/cpu.h>
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 #include <plat/gpio-cfg-helpers.h>
@@ -473,14 +474,10 @@
 
 static int __init s5p64x0_gpiolib_init(void)
 {
-	unsigned int chipid;
-
-	chipid = __raw_readl(S5P64X0_SYS_ID);
-
 	s5p64x0_gpiolib_set_cfg(s5p64x0_gpio_cfgs,
 				ARRAY_SIZE(s5p64x0_gpio_cfgs));
 
-	if ((chipid & 0xff000) == 0x50000) {
+	if (soc_is_s5p6450()) {
 		samsung_gpiolib_add_2bit_chips(s5p6450_gpio_2bit,
 					ARRAY_SIZE(s5p6450_gpio_2bit));
 
diff --git a/arch/arm/mach-s5p64x0/include/mach/gpio.h b/arch/arm/mach-s5p64x0/include/mach/gpio.h
index adb5f29..06cd3c9 100644
--- a/arch/arm/mach-s5p64x0/include/mach/gpio.h
+++ b/arch/arm/mach-s5p64x0/include/mach/gpio.h
@@ -13,11 +13,6 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H __FILE__
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* GPIO bank sizes */
 
 #define S5P6440_GPIO_A_NR	(6)
@@ -134,6 +129,4 @@
 
 #define ARCH_NR_GPIOS		(S5P64X0_GPIO_END + CONFIG_SAMSUNG_GPIO_EXTRA)
 
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c
index fe7380f..494e1a8 100644
--- a/arch/arm/mach-s5p64x0/irq-eint.c
+++ b/arch/arm/mach-s5p64x0/irq-eint.c
@@ -17,6 +17,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 
+#include <plat/cpu.h>
 #include <plat/regs-irqtype.h>
 #include <plat/gpio-cfg.h>
 
@@ -67,7 +68,7 @@
 	__raw_writel(ctrl, S5P64X0_EINT0CON0);
 
 	/* Configure the GPIO pin for 6450 or 6440 based on CPU ID */
-	if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000))
+	if (soc_is_s5p6450())
 		s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2));
 	else
 		s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2));
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index 29a8a12..5e1a924 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -15,11 +15,6 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H __FILE__
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* GPIO bank sizes */
 #define S5PC100_GPIO_A0_NR	(8)
 #define S5PC100_GPIO_A1_NR	(5)
@@ -146,6 +141,4 @@
 /* define the number of gpios we need to the one after the MP04() range */
 #define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c
index 52a8e60..f5f8fa8 100644
--- a/arch/arm/mach-s5pv210/clock.c
+++ b/arch/arm/mach-s5pv210/clock.c
@@ -815,8 +815,7 @@
 		.reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.0",
+			.name		= "sclk_cam0",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 3),
 		},
@@ -825,8 +824,7 @@
 		.reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 },
 	}, {
 		.clk		= {
-			.name		= "sclk_cam",
-			.devname	= "s5pv210-fimc.1",
+			.name		= "sclk_cam1",
 			.enable		= s5pv210_clk_mask0_ctrl,
 			.ctrlbit	= (1 << 4),
 		},
diff --git a/arch/arm/mach-s5pv210/include/mach/gpio.h b/arch/arm/mach-s5pv210/include/mach/gpio.h
index a5a1e33..6c8b903 100644
--- a/arch/arm/mach-s5pv210/include/mach/gpio.h
+++ b/arch/arm/mach-s5pv210/include/mach/gpio.h
@@ -13,11 +13,6 @@
 #ifndef __ASM_ARCH_GPIO_H
 #define __ASM_ARCH_GPIO_H __FILE__
 
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
 /* Practically, GPIO banks up to MP03 are the configurable gpio banks */
 
 /* GPIO bank sizes */
@@ -142,6 +137,4 @@
 #define ARCH_NR_GPIOS		(S5PV210_MP05(S5PV210_GPIO_MP05_NR) +	\
 				 CONFIG_SAMSUNG_GPIO_EXTRA + 1)
 
-#include <asm-generic/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index 41252d2..73a5c64 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -3,7 +3,7 @@
 #
 
 # Common support
-obj-y := clock.o generic.o gpio.o irq.o dma.o time.o #nmi-oopser.o
+obj-y := clock.o generic.o irq.o dma.o time.o #nmi-oopser.o
 obj-m :=
 obj-n :=
 obj-  :=
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index e21f347..5fa5ae1 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -9,6 +9,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,7 +25,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 #include <asm/irq.h>
-#include <asm/gpio.h>
 
 #include "generic.h"
 
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 7befc10..7036318 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -28,6 +28,8 @@
 #include <asm/irq.h>
 #include <asm-generic/gpio.h>
 
+#define __ARM_GPIOLIB_COMPLEX
+
 static inline int gpio_get_value(unsigned gpio)
 {
 	if (__builtin_constant_p(gpio) && (gpio <= GPIO_MAX))
@@ -51,7 +53,5 @@
 
 #define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
 					(IRQ_GPIO11 - 11 + gpio))
-#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
-					(irq - IRQ_GPIO11 + 11))
 
 #endif
diff --git a/arch/arm/mach-shmobile/include/mach/gpio.h b/arch/arm/mach-shmobile/include/mach/gpio.h
index 2b1bb9e..7bf0890 100644
--- a/arch/arm/mach-shmobile/include/mach/gpio.h
+++ b/arch/arm/mach-shmobile/include/mach/gpio.h
@@ -18,31 +18,15 @@
 
 #ifdef CONFIG_GPIOLIB
 
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
 static inline int irq_to_gpio(unsigned int irq)
 {
 	return -ENOSYS;
 }
 
+#else
+
+#define __ARM_GPIOLIB_COMPLEX
+
 #endif /* CONFIG_GPIOLIB */
 
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-tegra/board-harmony-pcie.c b/arch/arm/mach-tegra/board-harmony-pcie.c
index 9c27b95..6db7d69 100644
--- a/arch/arm/mach-tegra/board-harmony-pcie.c
+++ b/arch/arm/mach-tegra/board-harmony-pcie.c
@@ -24,12 +24,10 @@
 
 #include <mach/pinmux.h>
 #include "board.h"
+#include "board-harmony.h"
 
 #ifdef CONFIG_TEGRA_PCI
 
-/* GPIO 3 of the PMIC */
-#define EN_VDD_1V05_GPIO	(TEGRA_NR_GPIOS + 2)
-
 static int __init harmony_pcie_init(void)
 {
 	struct regulator *regulator = NULL;
@@ -38,11 +36,11 @@
 	if (!machine_is_harmony())
 		return 0;
 
-	err = gpio_request(EN_VDD_1V05_GPIO, "EN_VDD_1V05");
+	err = gpio_request(TEGRA_GPIO_EN_VDD_1V05_GPIO, "EN_VDD_1V05");
 	if (err)
 		return err;
 
-	gpio_direction_output(EN_VDD_1V05_GPIO, 1);
+	gpio_direction_output(TEGRA_GPIO_EN_VDD_1V05_GPIO, 1);
 
 	regulator = regulator_get(NULL, "pex_clk");
 	if (IS_ERR_OR_NULL(regulator))
@@ -68,7 +66,7 @@
 	regulator_disable(regulator);
 	regulator_put(regulator);
 err_reg:
-	gpio_free(EN_VDD_1V05_GPIO);
+	gpio_free(TEGRA_GPIO_EN_VDD_1V05_GPIO);
 
 	return err;
 }
diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
index a4d1980..5835225 100644
--- a/arch/arm/mach-tegra/board-harmony.c
+++ b/arch/arm/mach-tegra/board-harmony.c
@@ -49,7 +49,8 @@
 		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
 		.mapbase	= TEGRA_UARTD_BASE,
 		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -117,6 +118,7 @@
 	&tegra_sdhci_device1,
 	&tegra_sdhci_device2,
 	&tegra_sdhci_device4,
+	&tegra_ehci3_device,
 	&tegra_i2s_device1,
 	&tegra_das_device,
 	&tegra_pcm_device,
@@ -140,6 +142,7 @@
 	{ "pll_a_out0",	"pll_a",	11289600,	true },
 	{ "cdev1",	NULL,		0,		true },
 	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "usb3",	"clk_m",	12000000,	true },
 	{ NULL,		NULL,		0,		0},
 };
 
diff --git a/arch/arm/mach-tegra/board-harmony.h b/arch/arm/mach-tegra/board-harmony.h
index d85142e..139d96c 100644
--- a/arch/arm/mach-tegra/board-harmony.h
+++ b/arch/arm/mach-tegra/board-harmony.h
@@ -17,6 +17,8 @@
 #ifndef _MACH_TEGRA_BOARD_HARMONY_H
 #define _MACH_TEGRA_BOARD_HARMONY_H
 
+#include <mach/gpio-tegra.h>
+
 #define HARMONY_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
 #define HARMONY_GPIO_WM8903(_x_)	(HARMONY_GPIO_TPS6586X(4) + (_x_))
 
@@ -31,6 +33,7 @@
 #define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PW2
 #define TEGRA_GPIO_INT_MIC_EN		TEGRA_GPIO_PX0
 #define TEGRA_GPIO_EXT_MIC_EN		TEGRA_GPIO_PX1
+#define TEGRA_GPIO_EN_VDD_1V05_GPIO	HARMONY_GPIO_TPS6586X(2)
 
 void harmony_pinmux_init(void);
 int harmony_regulator_init(void);
diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c
index bdd2627..2225769 100644
--- a/arch/arm/mach-tegra/board-paz00-pinmux.c
+++ b/arch/arm/mach-tegra/board-paz00-pinmux.c
@@ -145,6 +145,9 @@
 	{ .gpio = TEGRA_GPIO_SD1_WP,	.enable = true },
 	{ .gpio = TEGRA_GPIO_SD1_POWER,	.enable = true },
 	{ .gpio = TEGRA_ULPI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_PWRN,	.enable = true },
+	{ .gpio = TEGRA_WIFI_RST,	.enable = true },
+	{ .gpio = TEGRA_WIFI_LED,	.enable = true },
 };
 
 void paz00_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c
index 3197c4c..39363e5 100644
--- a/arch/arm/mach-tegra/board-paz00.c
+++ b/arch/arm/mach-tegra/board-paz00.c
@@ -26,6 +26,8 @@
 #include <linux/pda_power.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/rfkill-gpio.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,7 +37,6 @@
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
-#include <mach/gpio.h>
 
 #include "board.h"
 #include "board-paz00.h"
@@ -45,10 +46,22 @@
 
 static struct plat_serial8250_port debug_uart_platform_data[] = {
 	{
+		/* serial port on JP1 */
+		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
+		.mapbase	= TEGRA_UARTA_BASE,
+		.irq		= INT_UARTA,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 216000000,
+	}, {
+		/* serial port on mini-pcie */
 		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
 		.mapbase	= TEGRA_UARTD_BASE,
 		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -65,10 +78,48 @@
 	},
 };
 
+static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
+	.name		= "wifi_rfkill",
+	.reset_gpio	= TEGRA_WIFI_RST,
+	.shutdown_gpio	= TEGRA_WIFI_PWRN,
+	.type	= RFKILL_TYPE_WLAN,
+};
+
+static struct platform_device wifi_rfkill_device = {
+	.name	= "rfkill_gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &wifi_rfkill_platform_data,
+	},
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "wifi-led",
+		.default_trigger	= "rfkill0",
+		.gpio			= TEGRA_WIFI_LED,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &gpio_led_info,
+        },
+};
+
 static struct platform_device *paz00_devices[] __initdata = {
 	&debug_uart,
-	&tegra_sdhci_device1,
 	&tegra_sdhci_device4,
+	&tegra_sdhci_device1,
+	&wifi_rfkill_device,
+	&leds_gpio,
 };
 
 static void paz00_i2c_init(void)
@@ -94,7 +145,14 @@
 
 static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = {
 	/* name		parent		rate		enabled */
+	{ "uarta",	"pll_p",	216000000,	true },
 	{ "uartd",	"pll_p",	216000000,	true },
+
+	{ "pll_p_out4",	"pll_p",	24000000,	true },
+	{ "usbd",	"clk_m",	12000000,	false },
+	{ "usb2",	"clk_m",	12000000,	false },
+	{ "usb3",	"clk_m",	12000000,	false },
+
 	{ NULL,		NULL,		0,		0},
 };
 
diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h
index d4ff39d..8aff06e 100644
--- a/arch/arm/mach-tegra/board-paz00.h
+++ b/arch/arm/mach-tegra/board-paz00.h
@@ -17,11 +17,21 @@
 #ifndef _MACH_TEGRA_BOARD_PAZ00_H
 #define _MACH_TEGRA_BOARD_PAZ00_H
 
+#include <mach/gpio-tegra.h>
+
+/* SDCARD */
 #define TEGRA_GPIO_SD1_CD		TEGRA_GPIO_PV5
 #define TEGRA_GPIO_SD1_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD1_POWER		TEGRA_GPIO_PT3
+
+/* ULPI */
 #define TEGRA_ULPI_RST			TEGRA_GPIO_PV0
 
+/* WIFI */
+#define TEGRA_WIFI_PWRN			TEGRA_GPIO_PK5
+#define TEGRA_WIFI_RST			TEGRA_GPIO_PD1
+#define TEGRA_WIFI_LED			TEGRA_GPIO_PD0
+
 void paz00_pinmux_init(void);
 
 #endif
diff --git a/arch/arm/mach-tegra/board-seaboard-pinmux.c b/arch/arm/mach-tegra/board-seaboard-pinmux.c
index 0bda495..74f78b7 100644
--- a/arch/arm/mach-tegra/board-seaboard-pinmux.c
+++ b/arch/arm/mach-tegra/board-seaboard-pinmux.c
@@ -49,7 +49,7 @@
 	{TEGRA_PINGROUP_CRTP,  TEGRA_MUX_CRT,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_CSUS,  TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP1,  TEGRA_MUX_DAP1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
-	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_DAP2,  TEGRA_MUX_DAP2,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DAP3,  TEGRA_MUX_DAP3,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_DAP4,  TEGRA_MUX_DAP4,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_DDC,   TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
@@ -133,7 +133,7 @@
 	{TEGRA_PINGROUP_SPDO,  TEGRA_MUX_RSVD2,         TEGRA_PUPD_NORMAL,    TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SPIA,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIB,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
-	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
+	{TEGRA_PINGROUP_SPIC,  TEGRA_MUX_GMI,           TEGRA_PUPD_PULL_UP,   TEGRA_TRI_NORMAL},
 	{TEGRA_PINGROUP_SPID,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIE,  TEGRA_MUX_SPI1,          TEGRA_PUPD_NORMAL,    TEGRA_TRI_TRISTATE},
 	{TEGRA_PINGROUP_SPIF,  TEGRA_MUX_SPI1,          TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE},
@@ -167,6 +167,8 @@
 	{ .gpio = TEGRA_GPIO_LIDSWITCH,		.enable = true },
 	{ .gpio = TEGRA_GPIO_POWERKEY,		.enable = true },
 	{ .gpio = TEGRA_GPIO_ISL29018_IRQ,	.enable = true },
+	{ .gpio = TEGRA_GPIO_CDC_IRQ,		.enable = true },
+	{ .gpio = TEGRA_GPIO_USB1,		.enable = true },
 };
 
 void __init seaboard_pinmux_init(void)
diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c
index 9e98ac7..bf13ea3 100644
--- a/arch/arm/mach-tegra/board-seaboard.c
+++ b/arch/arm/mach-tegra/board-seaboard.c
@@ -25,9 +25,12 @@
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 
+#include <sound/wm8903.h>
+
 #include <mach/iomap.h>
 #include <mach/irqs.h>
 #include <mach/sdhci.h>
+#include <mach/tegra_wm8903_pdata.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,7 +44,8 @@
 static struct plat_serial8250_port debug_uart_platform_data[] = {
 	{
 		/* Memory and IRQ filled in before registration */
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
@@ -62,6 +66,12 @@
 	/* name		parent		rate		enabled */
 	{ "uartb",	"pll_p",	216000000,	true},
 	{ "uartd",	"pll_p",	216000000,	true},
+	{ "pll_a",	"pll_p_out1",	56448000,	true },
+	{ "pll_a_out0",	"pll_a",	11289600,	true },
+	{ "cdev1",	NULL,		0,		true },
+	{ "i2s1",	"pll_a_out0",	11289600,	false},
+	{ "usbd",	"clk_m",	12000000,	true},
+	{ "usb3",	"clk_m",	12000000,	true},
 	{ NULL,		NULL,		0,		0},
 };
 
@@ -117,6 +127,22 @@
 	.is_8bit	= 1,
 };
 
+static struct tegra_wm8903_platform_data seaboard_audio_pdata = {
+	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
+	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
+	.gpio_hp_mute		= -1,
+	.gpio_int_mic_en	= -1,
+	.gpio_ext_mic_en	= -1,
+};
+
+static struct platform_device seaboard_audio_device = {
+	.name	= "tegra-snd-wm8903",
+	.id	= 0,
+	.dev	= {
+		.platform_data  = &seaboard_audio_pdata,
+	},
+};
+
 static struct platform_device *seaboard_devices[] __initdata = {
 	&debug_uart,
 	&tegra_pmu_device,
@@ -124,6 +150,10 @@
 	&tegra_sdhci_device3,
 	&tegra_sdhci_device1,
 	&seaboard_gpio_keys_device,
+	&tegra_i2s_device1,
+	&tegra_das_device,
+	&tegra_pcm_device,
+	&seaboard_audio_device,
 };
 
 static struct i2c_board_info __initdata isl29018_device = {
@@ -135,12 +165,56 @@
 	I2C_BOARD_INFO("adt7461", 0x4c),
 };
 
+static struct wm8903_platform_data wm8903_pdata = {
+	.irq_active_low = 0,
+	.micdet_cfg = 0,
+	.micdet_delay = 100,
+	.gpio_base = SEABOARD_GPIO_WM8903(0),
+	.gpio_cfg = {
+		WM8903_GPIO_NO_CONFIG,
+		WM8903_GPIO_NO_CONFIG,
+		0,
+		WM8903_GPIO_NO_CONFIG,
+		WM8903_GPIO_NO_CONFIG,
+	},
+};
+
+static struct i2c_board_info __initdata wm8903_device = {
+	I2C_BOARD_INFO("wm8903", 0x1a),
+	.platform_data = &wm8903_pdata,
+	.irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ),
+};
+
+static int seaboard_ehci_init(void)
+{
+	int gpio_status;
+
+	gpio_status = gpio_request(TEGRA_GPIO_USB1, "VBUS_USB1");
+	if (gpio_status < 0) {
+		pr_err("VBUS_USB1 request GPIO FAILED\n");
+		WARN_ON(1);
+	}
+
+	gpio_status = gpio_direction_output(TEGRA_GPIO_USB1, 1);
+	if (gpio_status < 0) {
+		pr_err("VBUS_USB1 request GPIO DIRECTION FAILED\n");
+		WARN_ON(1);
+	}
+	gpio_set_value(TEGRA_GPIO_USB1, 1);
+
+	platform_device_register(&tegra_ehci1_device);
+	platform_device_register(&tegra_ehci3_device);
+
+	return 0;
+}
+
 static void __init seaboard_i2c_init(void)
 {
 	gpio_request(TEGRA_GPIO_ISL29018_IRQ, "isl29018");
 	gpio_direction_input(TEGRA_GPIO_ISL29018_IRQ);
 
 	i2c_register_board_info(0, &isl29018_device, 1);
+	i2c_register_board_info(0, &wm8903_device, 1);
 
 	i2c_register_board_info(3, &adt7461_device, 1);
 
@@ -161,6 +235,8 @@
 	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
 
 	platform_add_devices(seaboard_devices, ARRAY_SIZE(seaboard_devices));
+
+	seaboard_ehci_init();
 }
 
 static void __init tegra_seaboard_init(void)
@@ -182,6 +258,9 @@
 	debug_uart_platform_data[0].mapbase = TEGRA_UARTB_BASE;
 	debug_uart_platform_data[0].irq = INT_UARTB;
 
+	seaboard_audio_pdata.gpio_hp_mute = TEGRA_GPIO_KAEN_HP_MUTE;
+	tegra_gpio_enable(TEGRA_GPIO_KAEN_HP_MUTE);
+
 	seaboard_common_init();
 
 	seaboard_i2c_init();
diff --git a/arch/arm/mach-tegra/board-seaboard.h b/arch/arm/mach-tegra/board-seaboard.h
index d8415e1..4c45d4c 100644
--- a/arch/arm/mach-tegra/board-seaboard.h
+++ b/arch/arm/mach-tegra/board-seaboard.h
@@ -17,6 +17,11 @@
 #ifndef _MACH_TEGRA_BOARD_SEABOARD_H
 #define _MACH_TEGRA_BOARD_SEABOARD_H
 
+#include <mach/gpio-tegra.h>
+
+#define SEABOARD_GPIO_TPS6586X(_x_)	(TEGRA_NR_GPIOS + (_x_))
+#define SEABOARD_GPIO_WM8903(_x_)	(SEABOARD_GPIO_TPS6586X(4) + (_x_))
+
 #define TEGRA_GPIO_SD2_CD		TEGRA_GPIO_PI5
 #define TEGRA_GPIO_SD2_WP		TEGRA_GPIO_PH1
 #define TEGRA_GPIO_SD2_POWER		TEGRA_GPIO_PI6
@@ -31,10 +36,11 @@
 #define TEGRA_GPIO_MAGNETOMETER		TEGRA_GPIO_PN5
 #define TEGRA_GPIO_ISL29018_IRQ		TEGRA_GPIO_PZ2
 #define TEGRA_GPIO_AC_ONLINE		TEGRA_GPIO_PV3
-
-#define TPS_GPIO_BASE			TEGRA_NR_GPIOS
-
-#define TPS_GPIO_WWAN_PWR		(TPS_GPIO_BASE + 2)
+#define TEGRA_GPIO_WWAN_PWR		SEABOARD_GPIO_TPS6586X(2)
+#define TEGRA_GPIO_CDC_IRQ		TEGRA_GPIO_PX3
+#define TEGRA_GPIO_SPKR_EN		SEABOARD_GPIO_WM8903(2)
+#define TEGRA_GPIO_HP_DET		TEGRA_GPIO_PX1
+#define TEGRA_GPIO_KAEN_HP_MUTE		TEGRA_GPIO_PA5
 
 void seaboard_pinmux_init(void);
 
diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c
index 47c596c..bcb1916 100644
--- a/arch/arm/mach-tegra/board-trimslice-pinmux.c
+++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c
@@ -13,12 +13,11 @@
  * GNU General Public License for more details.
  *
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <mach/pinmux.h>
-#include <mach/gpio.h>
 
 #include "gpio-names.h"
 #include "board-trimslice.h"
diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c
index 8489aa8..9908894 100644
--- a/arch/arm/mach-tegra/board-trimslice.c
+++ b/arch/arm/mach-tegra/board-trimslice.c
@@ -32,7 +32,6 @@
 
 #include <mach/iomap.h>
 #include <mach/sdhci.h>
-#include <mach/gpio.h>
 
 #include "board.h"
 #include "clock.h"
@@ -46,7 +45,8 @@
 		.membase	= IO_ADDRESS(TEGRA_UARTA_BASE),
 		.mapbase	= TEGRA_UARTA_BASE,
 		.irq		= INT_UARTA,
-		.flags		= UPF_BOOT_AUTOCONF,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
+		.type		= PORT_TEGRA,
 		.iotype		= UPIO_MEM,
 		.regshift	= 2,
 		.uartclk	= 216000000,
diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h
index 7a7dee8..50f128d 100644
--- a/arch/arm/mach-tegra/board-trimslice.h
+++ b/arch/arm/mach-tegra/board-trimslice.h
@@ -17,6 +17,8 @@
 #ifndef _MACH_TEGRA_BOARD_TRIMSLICE_H
 #define _MACH_TEGRA_BOARD_TRIMSLICE_H
 
+#include <mach/gpio-tegra.h>
+
 #define TRIMSLICE_GPIO_SD4_CD	TEGRA_GPIO_PP1	/* mmc4 cd */
 #define TRIMSLICE_GPIO_SD4_WP	TEGRA_GPIO_PP2	/* mmc4 wp */
 
diff --git a/arch/arm/mach-tegra/include/mach/gpio-tegra.h b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
new file mode 100644
index 0000000..87d37fd
--- /dev/null
+++ b/arch/arm/mach-tegra/include/mach/gpio-tegra.h
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-tegra/include/mach/gpio.h
+ *
+ * Copyright (C) 2010 Google, Inc.
+ *
+ * Author:
+ *	Erik Gilling <konkers@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __MACH_TEGRA_GPIO_TEGRA_H
+#define __MACH_TEGRA_GPIO_TEGRA_H
+
+#include <linux/types.h>
+#include <mach/irqs.h>
+
+#define TEGRA_NR_GPIOS		INT_GPIO_NR
+
+#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
+
+struct tegra_gpio_table {
+	int	gpio;	/* GPIO number */
+	bool	enable;	/* Enable for GPIO at init? */
+};
+
+void tegra_gpio_config(struct tegra_gpio_table *table, int num);
+void tegra_gpio_enable(int gpio);
+void tegra_gpio_disable(int gpio);
+
+#endif
diff --git a/arch/arm/mach-tegra/include/mach/gpio.h b/arch/arm/mach-tegra/include/mach/gpio.h
index 196f114..e69de29 100644
--- a/arch/arm/mach-tegra/include/mach/gpio.h
+++ b/arch/arm/mach-tegra/include/mach/gpio.h
@@ -1,60 +0,0 @@
-/*
- * arch/arm/mach-tegra/include/mach/gpio.h
- *
- * Copyright (C) 2010 Google, Inc.
- *
- * Author:
- *	Erik Gilling <konkers@google.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#ifndef __MACH_TEGRA_GPIO_H
-#define __MACH_TEGRA_GPIO_H
-
-#include <linux/init.h>
-#include <mach/irqs.h>
-
-#define TEGRA_NR_GPIOS		INT_GPIO_NR
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
-#define TEGRA_GPIO_TO_IRQ(gpio) (INT_GPIO_BASE + (gpio))
-#define TEGRA_IRQ_TO_GPIO(irq) ((irq) - INT_GPIO_BASE)
-
-static inline int gpio_to_irq(unsigned int gpio)
-{
-	if (gpio < TEGRA_NR_GPIOS)
-		return INT_GPIO_BASE + gpio;
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned int irq)
-{
-	if ((irq >= INT_GPIO_BASE) && (irq < INT_GPIO_BASE + INT_GPIO_NR))
-		return irq - INT_GPIO_BASE;
-	return -EINVAL;
-}
-
-struct tegra_gpio_table {
-	int	gpio;	/* GPIO number */
-	bool	enable;	/* Enable for GPIO at init? */
-};
-
-void tegra_gpio_config(struct tegra_gpio_table *table, int num);
-void tegra_gpio_enable(int gpio);
-void tegra_gpio_disable(int gpio);
-
-#endif
diff --git a/arch/arm/mach-tegra/usb_phy.c b/arch/arm/mach-tegra/usb_phy.c
index 88081bb..37576a7 100644
--- a/arch/arm/mach-tegra/usb_phy.c
+++ b/arch/arm/mach-tegra/usb_phy.c
@@ -28,6 +28,7 @@
 #include <linux/usb/otg.h>
 #include <linux/usb/ulpi.h>
 #include <asm/mach-types.h>
+#include <mach/gpio-tegra.h>
 #include <mach/usb_phy.h>
 #include <mach/iomap.h>
 
diff --git a/arch/arm/mach-u300/Kconfig b/arch/arm/mach-u300/Kconfig
index 32a7b0f..7b5c229 100644
--- a/arch/arm/mach-u300/Kconfig
+++ b/arch/arm/mach-u300/Kconfig
@@ -6,6 +6,7 @@
 
 config MACH_U300
 	bool "U300"
+	select GPIO_U300
 
 comment "ST-Ericsson U300/U330/U335/U365 Feature Selections"
 
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 376b6df..22c5ab7 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -38,6 +38,7 @@
 #include <mach/hardware.h>
 #include <mach/syscon.h>
 #include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
 
 #include "clock.h"
 #include "mmc.h"
@@ -242,7 +243,7 @@
 		.end   = IRQ_U300_GPIO_PORT2,
 		.flags = IORESOURCE_IRQ,
 	},
-#ifdef U300_COH901571_3
+#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
 	{
 		.name  = "gpio3",
 		.start = IRQ_U300_GPIO_PORT3,
@@ -255,6 +256,7 @@
 		.end   = IRQ_U300_GPIO_PORT4,
 		.flags = IORESOURCE_IRQ,
 	},
+#endif
 #ifdef CONFIG_MACH_U300_BS335
 	{
 		.name  = "gpio5",
@@ -269,7 +271,6 @@
 		.flags = IORESOURCE_IRQ,
 	},
 #endif /* CONFIG_MACH_U300_BS335 */
-#endif /* U300_COH901571_3 */
 };
 
 static struct resource keypad_resources[] = {
@@ -1559,11 +1560,35 @@
 	.resource = i2c1_resources,
 };
 
+/*
+ * The different variants have a few different versions of the
+ * GPIO block, with different number of ports.
+ */
+static struct u300_gpio_platform u300_gpio_plat = {
+#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
+	.variant = U300_GPIO_COH901335,
+	.ports = 3,
+#endif
+#ifdef CONFIG_MACH_U300_BS335
+	.variant = U300_GPIO_COH901571_3_BS335,
+	.ports = 7,
+#endif
+#ifdef CONFIG_MACH_U300_BS365
+	.variant = U300_GPIO_COH901571_3_BS365,
+	.ports = 5,
+#endif
+	.gpio_base = 0,
+	.gpio_irq_base = IRQ_U300_GPIO_BASE,
+};
+
 static struct platform_device gpio_device = {
 	.name = "u300-gpio",
 	.id = -1,
 	.num_resources = ARRAY_SIZE(gpio_resources),
 	.resource = gpio_resources,
+	.dev = {
+		.platform_data = &u300_gpio_plat,
+	},
 };
 
 static struct platform_device keypad_device = {
@@ -1669,7 +1694,7 @@
 	BUG_ON(IS_ERR(clk));
 	clk_enable(clk);
 
-	for (i = 0; i < NR_IRQS; i++)
+	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
 	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
 	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
diff --git a/arch/arm/mach-u300/include/mach/gpio-u300.h b/arch/arm/mach-u300/include/mach/gpio-u300.h
new file mode 100644
index 0000000..0c2b202
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/gpio-u300.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright (C) 2007-2011 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * GPIO block resgister definitions and inline macros for
+ * U300 GPIO COH 901 335 or COH 901 571/3
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#ifndef __MACH_U300_GPIO_U300_H
+#define __MACH_U300_GPIO_U300_H
+
+/*
+ * Individual pin assignments for the B26/S26. Notice that the
+ * actual usage of these pins depends on the PAD MUX settings, that
+ * is why the same number can potentially appear several times.
+ * In the reference design each pin is only used for one purpose.
+ * These were determined by inspecting the B26/S26 schematic:
+ * 2/1911-ROA 128 1603
+ */
+#ifdef CONFIG_MACH_U300_BS2X
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
+#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
+#define U300_GPIO_PIN_CAM_SLEEP		4
+#define U300_GPIO_PIN_CAM_REG_EN	5
+#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
+#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
+#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
+#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
+#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
+#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
+#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
+#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+#endif
+
+/*
+ * Individual pin assignments for the B330/S330 and B365/S365.
+ * Notice that the actual usage of these pins depends on the
+ * PAD MUX settings, that is why the same number can potentially
+ * appear several times. In the reference design each pin is only
+ * used for one purpose. These were determined by inspecting the
+ * S365 schematic.
+ */
+#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
+    defined(CONFIG_MACH_U300_BS335)
+#define U300_GPIO_PIN_UART_RX		0
+#define U300_GPIO_PIN_UART_TX		1
+#define U300_GPIO_PIN_UART_CTS		2
+#define U300_GPIO_PIN_UART_RTS		3
+#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
+#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
+#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
+#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
+
+#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
+#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
+#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
+#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
+#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
+#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
+#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
+#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
+#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
+#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
+#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
+#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
+#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
+#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
+#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
+#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
+#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
+#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
+#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
+#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
+#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
+#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
+#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
+#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
+#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
+#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
+#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
+#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
+#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
+
+#ifdef CONFIG_MACH_U300_BS335
+
+#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
+#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
+#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
+#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
+#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
+#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
+#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
+#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
+
+#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
+#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
+#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
+#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
+#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
+#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
+#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
+#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
+#endif
+
+#endif
+
+/**
+ * enum u300_gpio_variant - the type of U300 GPIO employed
+ */
+enum u300_gpio_variant {
+	U300_GPIO_COH901335,
+	U300_GPIO_COH901571_3_BS335,
+	U300_GPIO_COH901571_3_BS365,
+};
+
+/**
+ * struct u300_gpio_platform - U300 GPIO platform data
+ * @variant: IP block variant
+ * @ports: number of GPIO block ports
+ * @gpio_base: first GPIO number for this block (use a free range)
+ * @gpio_irq_base: first GPIO IRQ number for this block (use a free range)
+ */
+struct u300_gpio_platform {
+	enum u300_gpio_variant variant;
+	u8 ports;
+	int gpio_base;
+	int gpio_irq_base;
+};
+
+#endif /* __MACH_U300_GPIO_U300_H */
diff --git a/arch/arm/mach-u300/include/mach/gpio.h b/arch/arm/mach-u300/include/mach/gpio.h
index d5a71ab..e69de29 100644
--- a/arch/arm/mach-u300/include/mach/gpio.h
+++ b/arch/arm/mach-u300/include/mach/gpio.h
@@ -1,294 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/include/mach/gpio.h
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * GPIO block resgister definitions and inline macros for
- * U300 GPIO COH 901 335 or COH 901 571/3
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#ifndef __MACH_U300_GPIO_H
-#define __MACH_U300_GPIO_H
-
-#include <linux/kernel.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-/* Switch type depending on platform/chip variant */
-#if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_COH901335
-#endif
-#if defined(CONFIG_MACH_U300_BS365) || defined(CONFIG_MACH_U300_BS335)
-#define U300_COH901571_3
-#endif
-
-/* Get base address for regs here */
-#include "u300-regs.h"
-/* IRQ numbers */
-#include "irqs.h"
-
-/*
- * This is the GPIO block definitions. GPIO (General Purpose I/O) can be
- * used for anything, and often is. The event/enable etc figures are for
- * the lowermost pin (pin 0 on each port), shift this left to match your
- * pin if you're gonna use these values.
- */
-#ifdef U300_COH901335
-#define U300_GPIO_PORTX_SPACING				(0x1C)
-/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
-#define U300_GPIO_PXPDIR				(0x00)
-#define U300_GPIO_PXPDOR				(0x00)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR					(0x04)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV					(0x08)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN					(0x0C)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR					(0x10)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR					(0x14)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER					(0x18)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
-/* Control Register 32bit (R/W) */
-#define U300_GPIO_CR					(0x54)
-#define U300_GPIO_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
-/* three ports of 8 bits each = GPIO pins 0..23 */
-#define U300_GPIO_NUM_PORTS 3
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX	(U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-#ifdef U300_COH901571_3
-/*
- * Control Register 32bit (R/W)
- * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
- * gives the number of GPIO pins.
- * bit 8-2  (mask 0x000001FC) contains the core version ID.
- */
-#define U300_GPIO_CR					(0x00)
-#define U300_GPIO_CR_SYNC_SEL_ENABLE			(0x00000002UL)
-#define U300_GPIO_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
-#define U300_GPIO_PORTX_SPACING				(0x30)
-/* Port X Pin Data INPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDIR				(0x04)
-/* Port X Pin Data OUTPUT Register 32bit (R/W) */
-#define U300_GPIO_PXPDOR				(0x08)
-/* Port X Pin Config Register 32bit (R/W) */
-#define U300_GPIO_PXPCR					(0x0C)
-#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
-#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
-#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
-#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
-/* Port X Pull-up Enable Register 32bit (R/W) */
-#define U300_GPIO_PXPER					(0x10)
-#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
-#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
-/* Port X Interrupt Event Register 32bit (R/W) */
-#define U300_GPIO_PXIEV					(0x14)
-#define U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIEV_IRQ_EVENT			(0x00000001UL)
-/* Port X Interrupt Enable Register 32bit (R/W) */
-#define U300_GPIO_PXIEN					(0x18)
-#define U300_GPIO_PXIEN_ALL_IRQ_ENABLE_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIEN_IRQ_ENABLE			(0x00000001UL)
-/* Port X Interrupt Force Register 32bit (R/W) */
-#define U300_GPIO_PXIFR					(0x1C)
-#define U300_GPIO_PXIFR_ALL_IRQ_FORCE_MASK		(0x000000FFUL)
-#define U300_GPIO_PXIFR_IRQ_FORCE			(0x00000001UL)
-/* Port X Interrupt Config Register 32bit (R/W) */
-#define U300_GPIO_PXICR					(0x20)
-#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
-#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
-#ifdef CONFIG_MACH_U300_BS335
-/* seven ports of 8 bits each = GPIO pins 0..55 */
-#define U300_GPIO_NUM_PORTS 7
-#else
-/* five ports of 8 bits each = GPIO pins 0..39 */
-#define U300_GPIO_NUM_PORTS 5
-#endif
-#define U300_GPIO_PINS_PER_PORT 8
-#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * U300_GPIO_NUM_PORTS - 1)
-#endif
-
-/*
- * Individual pin assignments for the B26/S26. Notice that the
- * actual usage of these pins depends on the PAD MUX settings, that
- * is why the same number can potentially appear several times.
- * In the reference design each pin is only used for one purpose.
- * These were determined by inspecting the B26/S26 schematic:
- * 2/1911-ROA 128 1603
- */
-#ifdef CONFIG_MACH_U300_BS2X
-#define U300_GPIO_PIN_UART_RX		0
-#define U300_GPIO_PIN_UART_TX		1
-#define U300_GPIO_PIN_GPIO02		2  /* Unrouted */
-#define U300_GPIO_PIN_GPIO03		3  /* Unrouted */
-#define U300_GPIO_PIN_CAM_SLEEP		4
-#define U300_GPIO_PIN_CAM_REG_EN	5
-#define U300_GPIO_PIN_GPIO06		6  /* Unrouted */
-#define U300_GPIO_PIN_GPIO07		7  /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO08		8  /* Service point SP2321 */
-#define U300_GPIO_PIN_GPIO09		9  /* Service point SP2322 */
-#define U300_GPIO_PIN_PHFSENSE		10 /* Headphone jack sensing */
-#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_FLIPSENSE		13 /* Mechanical flip sensing */
-#define U300_GPIO_PIN_GPIO14		14 /* DSP JTAG Port RTCK */
-#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16		16 /* Unrouted */
-#define U300_GPIO_PIN_GPIO17		17 /* Unrouted */
-#define U300_GPIO_PIN_GPIO18		18 /* Unrouted */
-#define U300_GPIO_PIN_GPIO19		19 /* Unrouted */
-#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
-#endif
-
-/*
- * Individual pin assignments for the B330/S330 and B365/S365.
- * Notice that the actual usage of these pins depends on the
- * PAD MUX settings, that is why the same number can potentially
- * appear several times. In the reference design each pin is only
- * used for one purpose. These were determined by inspecting the
- * S365 schematic.
- */
-#if defined(CONFIG_MACH_U300_BS330) || defined(CONFIG_MACH_U300_BS365) || \
-    defined(CONFIG_MACH_U300_BS335)
-#define U300_GPIO_PIN_UART_RX		0
-#define U300_GPIO_PIN_UART_TX		1
-#define U300_GPIO_PIN_UART_CTS		2
-#define U300_GPIO_PIN_UART_RTS		3
-#define U300_GPIO_PIN_CAM_MAIN_STANDBY	4 /* Camera MAIN standby */
-#define U300_GPIO_PIN_GPIO05		5 /* Unrouted */
-#define U300_GPIO_PIN_MS_CD		6 /* Memory Stick Card insertion */
-#define U300_GPIO_PIN_GPIO07		7 /* Test point TP2430 */
-
-#define U300_GPIO_PIN_GPIO08		8 /* Test point TP2437 */
-#define U300_GPIO_PIN_GPIO09		9 /* Test point TP2431 */
-#define U300_GPIO_PIN_GPIO10		10 /* Test point TP2432 */
-#define U300_GPIO_PIN_MMC_CLKRET	11 /* Clock return from MMC/SD card */
-#define U300_GPIO_PIN_MMC_CD		12 /* MMC Card insertion detection */
-#define U300_GPIO_PIN_CAM_SUB_STANDBY	13 /* Camera SUB standby */
-#define U300_GPIO_PIN_GPIO14		14 /* Test point TP2436 */
-#define U300_GPIO_PIN_GPIO15		15 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO16		16 /* Test point TP2438 */
-#define U300_GPIO_PIN_PHFSENSE		17 /* Headphone jack sensing */
-#define U300_GPIO_PIN_GPIO18		18 /* Test point TP2439 */
-#define U300_GPIO_PIN_GPIO19		19 /* Routed somewhere */
-#define U300_GPIO_PIN_GPIO20		20 /* Unrouted */
-#define U300_GPIO_PIN_GPIO21		21 /* Unrouted */
-#define U300_GPIO_PIN_GPIO22		22 /* Unrouted */
-#define U300_GPIO_PIN_GPIO23		23 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO24		24 /* Unrouted */
-#define U300_GPIO_PIN_GPIO25		25 /* Unrouted */
-#define U300_GPIO_PIN_GPIO26		26 /* Unrouted */
-#define U300_GPIO_PIN_GPIO27		27 /* Unrouted */
-#define U300_GPIO_PIN_GPIO28		28 /* Unrouted */
-#define U300_GPIO_PIN_GPIO29		29 /* Unrouted */
-#define U300_GPIO_PIN_GPIO30		30 /* Unrouted */
-#define U300_GPIO_PIN_GPIO31		31 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO32		32 /* Unrouted */
-#define U300_GPIO_PIN_GPIO33		33 /* Unrouted */
-#define U300_GPIO_PIN_GPIO34		34 /* Unrouted */
-#define U300_GPIO_PIN_GPIO35		35 /* Unrouted */
-#define U300_GPIO_PIN_GPIO36		36 /* Unrouted */
-#define U300_GPIO_PIN_GPIO37		37 /* Unrouted */
-#define U300_GPIO_PIN_GPIO38		38 /* Unrouted */
-#define U300_GPIO_PIN_GPIO39		39 /* Unrouted */
-
-#ifdef CONFIG_MACH_U300_BS335
-
-#define U300_GPIO_PIN_GPIO40		40 /* Unrouted */
-#define U300_GPIO_PIN_GPIO41		41 /* Unrouted */
-#define U300_GPIO_PIN_GPIO42		42 /* Unrouted */
-#define U300_GPIO_PIN_GPIO43		43 /* Unrouted */
-#define U300_GPIO_PIN_GPIO44		44 /* Unrouted */
-#define U300_GPIO_PIN_GPIO45		45 /* Unrouted */
-#define U300_GPIO_PIN_GPIO46		46 /* Unrouted */
-#define U300_GPIO_PIN_GPIO47		47 /* Unrouted */
-
-#define U300_GPIO_PIN_GPIO48		48 /* Unrouted */
-#define U300_GPIO_PIN_GPIO49		49 /* Unrouted */
-#define U300_GPIO_PIN_GPIO50		50 /* Unrouted */
-#define U300_GPIO_PIN_GPIO51		51 /* Unrouted */
-#define U300_GPIO_PIN_GPIO52		52 /* Unrouted */
-#define U300_GPIO_PIN_GPIO53		53 /* Unrouted */
-#define U300_GPIO_PIN_GPIO54		54 /* Unrouted */
-#define U300_GPIO_PIN_GPIO55		55 /* Unrouted */
-#endif
-
-#endif
-
-/* translates a pin number to a port number */
-#define PIN_TO_PORT(val) (val >> 3)
-
-/* These can be found in arch/arm/mach-u300/gpio.c */
-extern int gpio_is_valid(int number);
-extern int gpio_request(unsigned gpio, const char *label);
-extern void gpio_free(unsigned gpio);
-extern int gpio_direction_input(unsigned gpio);
-extern int gpio_direction_output(unsigned gpio, int value);
-extern int gpio_register_callback(unsigned gpio,
-				  int (*func)(void *arg),
-				  void *);
-extern int gpio_unregister_callback(unsigned gpio);
-extern void enable_irq_on_gpio_pin(unsigned gpio, int edge);
-extern void disable_irq_on_gpio_pin(unsigned gpio);
-extern void gpio_pullup(unsigned gpio, int value);
-extern int gpio_get_value(unsigned gpio);
-extern void gpio_set_value(unsigned gpio, int value);
-
-#define gpio_get_value_cansleep gpio_get_value
-#define gpio_set_value_cansleep gpio_set_value
-
-/* wrappers to sleep-enable the previous two functions */
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	return PIN_TO_PORT(gpio) + IRQ_U300_GPIO_PORT0;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	/*
-	 * FIXME: This is no 1-1 mapping at all, it points to the
-	 * whole block of 8 pins.
-	 */
-	return (irq - IRQ_U300_GPIO_PORT0) << 3;
-}
-
-#endif
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index 09b1b28f..d270fea 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -72,7 +72,7 @@
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_NR_IRQS			45
+#define U300_VIC_IRQS_END		45
 #endif
 
 /* The DB3350-specific interrupt lines */
@@ -88,7 +88,7 @@
 #define IRQ_U300_GPIO_PORT4		53
 #define IRQ_U300_GPIO_PORT5		54
 #define IRQ_U300_GPIO_PORT6		55
-#define U300_NR_IRQS			56
+#define U300_VIC_IRQS_END		56
 #endif
 
 /* The DB3210-specific interrupt lines */
@@ -106,16 +106,25 @@
 #define IRQ_U300_NFIF			45
 #define IRQ_U300_NFIF2			46
 #define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_NR_IRQS			48
+#define U300_VIC_IRQS_END		48
 #endif
 
-#ifdef CONFIG_AB3550_CORE
-#define IRQ_AB3550_BASE			(U300_NR_IRQS)
-#define IRQ_AB3550_END			(IRQ_AB3550_BASE + 37)
-
-#define NR_IRQS				(IRQ_AB3550_END + 1)
+/* Maximum 8*7 GPIO lines */
+#ifdef CONFIG_GPIO_U300
+#define IRQ_U300_GPIO_BASE		(U300_VIC_IRQS_END)
+#define IRQ_U300_GPIO_END		(IRQ_U300_GPIO_BASE + 56)
 #else
-#define NR_IRQS U300_NR_IRQS
+#define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
+/* Optional AB3550 mixsig chip */
+#ifdef CONFIG_AB3550_CORE
+#define IRQ_AB3550_BASE			(IRQ_U300_GPIO_END)
+#define IRQ_AB3550_END			(IRQ_AB3550_BASE + 38)
+#else
+#define IRQ_AB3550_END			(IRQ_U300_GPIO_END)
+#endif
+
+#define NR_IRQS				(IRQ_AB3550_END)
+
 #endif
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 677ccef..d9a5c92 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -13,12 +13,12 @@
 #include <linux/device.h>
 #include <linux/amba/bus.h>
 #include <linux/mmc/host.h>
-#include <linux/gpio.h>
 #include <linux/dmaengine.h>
 #include <linux/amba/mmci.h>
 #include <linux/slab.h>
 #include <mach/coh901318.h>
 #include <mach/dma_channels.h>
+#include <mach/gpio-u300.h>
 
 #include "mmc.h"
 #include "padmux.h"
diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index f26fd76..15b23e4 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -6,10 +6,10 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 
 #include "pins-db8500.h"
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
index 8ce46c0..feb5744 100644
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c
@@ -4,7 +4,7 @@
  * Board data for the U8500 UIB, also known as the New UIB
  * License terms: GNU General Public License (GPL), version 2
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
@@ -13,7 +13,6 @@
 #include <linux/mfd/tc3589x.h>
 #include <linux/input/matrix_keypad.h>
 
-#include <mach/gpio.h>
 #include <mach/irqs.h>
 
 #include "board-mop500.h"
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 2cc4876..f67b83d 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -37,6 +37,7 @@
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
diff --git a/arch/arm/mach-ux500/board-u5500-sdi.c b/arch/arm/mach-ux500/board-u5500-sdi.c
index 739fb4c..63c3f80 100644
--- a/arch/arm/mach-ux500/board-u5500-sdi.c
+++ b/arch/arm/mach-ux500/board-u5500-sdi.c
@@ -7,9 +7,9 @@
 
 #include <linux/amba/mmci.h>
 #include <linux/mmc/host.h>
-#include <linux/gpio.h>
 
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/db5500-regs.h>
 #include <plat/ste_dma40.h>
 
diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c
index 166d47a..e014aa7 100644
--- a/arch/arm/mach-ux500/board-u5500.c
+++ b/arch/arm/mach-ux500/board-u5500.c
@@ -8,7 +8,6 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
-#include <linux/gpio.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 
@@ -17,6 +16,7 @@
 
 #include <plat/pincfg.h>
 #include <plat/i2c.h>
+#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c
index 22705d2..9de1af0 100644
--- a/arch/arm/mach-ux500/cpu-db5500.c
+++ b/arch/arm/mach-ux500/cpu-db5500.c
@@ -13,7 +13,7 @@
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
 
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 4598b06..13e8890 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -14,12 +14,12 @@
 #include <linux/amba/bus.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
 
 #include <asm/mach/map.h>
 #include <asm/pmu.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
index 13a4ce0..c563e54 100644
--- a/arch/arm/mach-ux500/devices-common.c
+++ b/arch/arm/mach-ux500/devices-common.c
@@ -13,7 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/amba/bus.h>
 
-#include <plat/gpio.h>
+#include <plat/gpio-nomadik.h>
 
 #include <mach/hardware.h>
 
diff --git a/arch/arm/mach-ux500/include/mach/gpio.h b/arch/arm/mach-ux500/include/mach/gpio.h
index 3c4cd31..7389df9 100644
--- a/arch/arm/mach-ux500/include/mach/gpio.h
+++ b/arch/arm/mach-ux500/include/mach/gpio.h
@@ -7,6 +7,4 @@
  */
 #define ARCH_NR_GPIOS	350
 
-#include <plat/gpio.h>
-
 #endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-versatile/include/mach/gpio.h b/arch/arm/mach-versatile/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-versatile/include/mach/gpio.h
+++ b/arch/arm/mach-versatile/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-vt8500/include/mach/gpio.h b/arch/arm/mach-vt8500/include/mach/gpio.h
index 94ff276..40a8c178 100644
--- a/arch/arm/mach-vt8500/include/mach/gpio.h
+++ b/arch/arm/mach-vt8500/include/mach/gpio.h
@@ -1,6 +1 @@
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
+/* empty */
diff --git a/arch/arm/mach-w90x900/include/mach/gpio.h b/arch/arm/mach-w90x900/include/mach/gpio.h
index 034da3e..5385a42 100644
--- a/arch/arm/mach-w90x900/include/mach/gpio.h
+++ b/arch/arm/mach-w90x900/include/mach/gpio.h
@@ -15,16 +15,12 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
 
 static inline int gpio_to_irq(unsigned gpio)
 {
 	return gpio;
 }
+#define gpio_to_irq gpio_to_irq
 
 static inline int irq_to_gpio(unsigned irq)
 {
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 3b24bfa..07c4bc8 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -174,6 +174,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r12, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
  USER(	mcr	p15, 0, r12, c7, c11, 1	)	@ clean D line to the point of unification
 	add	r12, r12, r2
@@ -223,6 +227,10 @@
 	add	r1, r0, r1
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -247,6 +255,10 @@
 	sub	r3, r2, #1
 	tst	r0, r3
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 	mcrne	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 
 	tst	r1, r3
@@ -270,6 +282,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D / U line
 	add	r0, r0, r2
@@ -288,6 +304,10 @@
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
+#ifdef CONFIG_ARM_ERRATA_764369
+	ALT_SMP(W(dsb))
+	ALT_UP(W(nop))
+#endif
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D / U line
 	add	r0, r0, r2
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index 50be842..01f5987 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -347,6 +347,8 @@
 
 	if (addr)
 		*handle = pfn_to_dma(dev, page_to_pfn(page));
+	else
+		__dma_free_buffer(page, size);
 
 	return addr;
 }
diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h
index 31c820c..3e1ffc8 100644
--- a/arch/arm/plat-mxc/include/mach/gpio.h
+++ b/arch/arm/plat-mxc/include/mach/gpio.h
@@ -21,18 +21,12 @@
 
 #include <linux/spinlock.h>
 #include <mach/hardware.h>
-#include <asm-generic/gpio.h>
 
 
 /* There's a off-by-one betweem the gpio bank number and the gpiochip */
 /* range e.g. GPIO_1_5 is gpio 5 under linux */
 #define IMX_GPIO_NR(bank, nr)		(((bank) - 1) * 32 + (nr))
 
-/* use gpiolib dispatchers */
-#define gpio_get_value		__gpio_get_value
-#define gpio_set_value		__gpio_set_value
-#define gpio_cansleep		__gpio_cansleep
-
 #define gpio_to_irq(gpio)	(MXC_GPIO_IRQ_START + (gpio))
 #define irq_to_gpio(irq)	((irq) - MXC_GPIO_IRQ_START)
 
diff --git a/arch/arm/plat-nomadik/include/plat/gpio.h b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
similarity index 81%
rename from arch/arm/plat-nomadik/include/plat/gpio.h
rename to arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
index d5d7e65..3ba4d8f 100644
--- a/arch/arm/plat-nomadik/include/plat/gpio.h
+++ b/arch/arm/plat-nomadik/include/plat/gpio-nomadik.h
@@ -9,20 +9,9 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifndef __ASM_PLAT_GPIO_H
-#define __ASM_PLAT_GPIO_H
 
-#include <asm-generic/gpio.h>
-
-/*
- * These currently cause a function call to happen, they may be optimized
- * if needed by adding cpu-specific defines to identify blocks
- * (see mach-pxa/include/mach/gpio.h as an example using GPLR etc)
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
+#ifndef __PLAT_NOMADIK_GPIO
+#define __PLAT_NOMADIK_GPIO
 
 /*
  * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
@@ -93,4 +82,4 @@
 	bool supports_sleepmode;
 };
 
-#endif /* __ASM_PLAT_GPIO_H */
+#endif /* __PLAT_NOMADIK_GPIO */
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index 923c962..caa1f7b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -8,7 +8,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
@@ -18,7 +18,6 @@
 #include <mach/hardware.h>
 
 #include <plat/board.h>
-#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index fc05b10..61a1ec2 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -7,7 +7,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
@@ -19,7 +19,6 @@
 #include <asm/mach-types.h>
 
 #include <plat/fpga.h>
-#include <mach/gpio.h>
 
 
 /* Many OMAP development platforms reuse the same "debug board"; these
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index ea28f98..64c3bd4 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -8,7 +8,7 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
@@ -24,7 +24,6 @@
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <mach/gpio.h>
 #include <plat/menelaus.h>
 #include <plat/mcbsp.h>
 #include <plat/omap44xx.h>
diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 91e8de3..9e86ee0 100644
--- a/arch/arm/plat-omap/include/plat/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -222,26 +222,6 @@
 #include <linux/errno.h>
 #include <asm-generic/gpio.h>
 
-static inline int gpio_get_value(unsigned gpio)
-{
-	return __gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-	__gpio_set_value(gpio, value);
-}
-
-static inline int gpio_cansleep(unsigned gpio)
-{
-	return __gpio_cansleep(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-	return __gpio_to_irq(gpio);
-}
-
 static inline int irq_to_gpio(unsigned irq)
 {
 	int tmp;
diff --git a/arch/arm/plat-orion/include/plat/gpio.h b/arch/arm/plat-orion/include/plat/gpio.h
index 3075b9f..3abf304 100644
--- a/arch/arm/plat-orion/include/plat/gpio.h
+++ b/arch/arm/plat-orion/include/plat/gpio.h
@@ -12,15 +12,7 @@
 #define __PLAT_GPIO_H
 
 #include <linux/init.h>
-#include <asm-generic/gpio.h>
-
-/*
- * GENERIC_GPIO primitives.
- */
-#define gpio_get_value  __gpio_get_value
-#define gpio_set_value  __gpio_set_value
-#define gpio_cansleep   __gpio_cansleep
-#define gpio_to_irq     __gpio_to_irq
+#include <linux/types.h>
 
 /*
  * Orion-specific GPIO API extensions.
diff --git a/arch/arm/plat-pxa/Makefile b/arch/arm/plat-pxa/Makefile
index 3aca5ba..f302d04 100644
--- a/arch/arm/plat-pxa/Makefile
+++ b/arch/arm/plat-pxa/Makefile
@@ -4,7 +4,6 @@
 
 obj-y	:= dma.o
 
-obj-$(CONFIG_GENERIC_GPIO)	+= gpio.o
 obj-$(CONFIG_PXA3xx)		+= mfp.o
 obj-$(CONFIG_PXA95x)		+= mfp.o
 obj-$(CONFIG_ARCH_MMP)		+= mfp.o
diff --git a/arch/arm/plat-pxa/include/plat/gpio-pxa.h b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
new file mode 100644
index 0000000..b6390be
--- /dev/null
+++ b/arch/arm/plat-pxa/include/plat/gpio-pxa.h
@@ -0,0 +1,44 @@
+#ifndef __PLAT_PXA_GPIO_H
+#define __PLAT_PXA_GPIO_H
+
+struct irq_data;
+
+/*
+ * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
+ * one set of registers. The register offsets are organized below:
+ *
+ *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
+ * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
+ * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
+ * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
+ *
+ * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
+ * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
+ * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
+ *
+ * NOTE:
+ *   BANK 3 is only available on PXA27x and later processors.
+ *   BANK 4 and 5 are only available on PXA935
+ */
+
+#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space, the
+ * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
+ */
+extern int pxa_last_gpio;
+
+typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
+
+extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
+
+#endif /* __PLAT_PXA_GPIO_H */
diff --git a/arch/arm/plat-pxa/include/plat/gpio.h b/arch/arm/plat-pxa/include/plat/gpio.h
index 1ddd2b9..258f772 100644
--- a/arch/arm/plat-pxa/include/plat/gpio.h
+++ b/arch/arm/plat-pxa/include/plat/gpio.h
@@ -1,35 +1,10 @@
 #ifndef __PLAT_GPIO_H
 #define __PLAT_GPIO_H
 
-struct irq_data;
+#define __ARM_GPIOLIB_COMPLEX
 
-/*
- * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with
- * one set of registers. The register offsets are organized below:
- *
- *           GPLR    GPDR    GPSR    GPCR    GRER    GFER    GEDR
- * BANK 0 - 0x0000  0x000C  0x0018  0x0024  0x0030  0x003C  0x0048
- * BANK 1 - 0x0004  0x0010  0x001C  0x0028  0x0034  0x0040  0x004C
- * BANK 2 - 0x0008  0x0014  0x0020  0x002C  0x0038  0x0044  0x0050
- *
- * BANK 3 - 0x0100  0x010C  0x0118  0x0124  0x0130  0x013C  0x0148
- * BANK 4 - 0x0104  0x0110  0x011C  0x0128  0x0134  0x0140  0x014C
- * BANK 5 - 0x0108  0x0114  0x0120  0x012C  0x0138  0x0144  0x0150
- *
- * NOTE:
- *   BANK 3 is only available on PXA27x and later processors.
- *   BANK 4 and 5 are only available on PXA935
- */
-
-#define GPIO_BANK(n)	(GPIO_REGS_VIRT + BANK_OFF(n))
-
-#define GPLR_OFFSET	0x00
-#define GPDR_OFFSET	0x0C
-#define GPSR_OFFSET	0x18
-#define GPCR_OFFSET	0x24
-#define GRER_OFFSET	0x30
-#define GFER_OFFSET	0x3C
-#define GEDR_OFFSET	0x48
+/* The individual machine provides register offsets and NR_BUILTIN_GPIO */
+#include <mach/gpio-pxa.h>
 
 static inline int gpio_get_value(unsigned gpio)
 {
@@ -52,13 +27,4 @@
 
 #define gpio_cansleep		__gpio_cansleep
 
-/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
- * Those cases currently cause holes in the GPIO number space, the
- * actual number of the last GPIO is recorded by 'pxa_last_gpio'.
- */
-extern int pxa_last_gpio;
-
-typedef int (*set_wake_t)(struct irq_data *d, unsigned int on);
-
-extern void pxa_init_gpio(int mux_irq, int start, int end, set_wake_t fn);
 #endif /* __PLAT_GPIO_H */
diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c
index c1fc6c6..3c63353 100644
--- a/arch/arm/plat-s3c24xx/cpu.c
+++ b/arch/arm/plat-s3c24xx/cpu.c
@@ -215,19 +215,18 @@
 
 void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 {
-	unsigned long idcode = 0x0;
-
 	/* initialise the io descriptors we need for initialisation */
 	iotable_init(mach_desc, size);
 	iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc));
 
 	if (cpu_architecture() >= CPU_ARCH_ARMv5) {
-		idcode = s3c24xx_read_idcode_v5();
+		samsung_cpu_id = s3c24xx_read_idcode_v5();
 	} else {
-		idcode = s3c24xx_read_idcode_v4();
+		samsung_cpu_id = s3c24xx_read_idcode_v4();
 	}
+	s3c24xx_init_cpu();
 
 	arm_pm_restart = s3c24xx_pm_restart;
 
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c
index bbc2aa7..7b0a28f 100644
--- a/arch/arm/plat-s5p/cpu.c
+++ b/arch/arm/plat-s5p/cpu.c
@@ -33,48 +33,66 @@
 static const char name_s5pc100[] = "S5PC100";
 static const char name_s5pv210[] = "S5PV210/S5PC110";
 static const char name_exynos4210[] = "EXYNOS4210";
+static const char name_exynos4212[] = "EXYNOS4212";
+static const char name_exynos4412[] = "EXYNOS4412";
 
 static struct cpu_table cpu_ids[] __initdata = {
 	{
-		.idcode		= 0x56440100,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6440_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6440_map_io,
 		.init_clocks	= s5p6440_init_clocks,
 		.init_uarts	= s5p6440_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6440,
 	}, {
-		.idcode		= 0x36450000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5P6450_CPU_ID,
+		.idmask		= S5P64XX_CPU_MASK,
 		.map_io		= s5p6450_map_io,
 		.init_clocks	= s5p6450_init_clocks,
 		.init_uarts	= s5p6450_init_uarts,
 		.init		= s5p64x0_init,
 		.name		= name_s5p6450,
 	}, {
-		.idcode		= 0x43100000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PC100_CPU_ID,
+		.idmask		= S5PC100_CPU_MASK,
 		.map_io		= s5pc100_map_io,
 		.init_clocks	= s5pc100_init_clocks,
 		.init_uarts	= s5pc100_init_uarts,
 		.init		= s5pc100_init,
 		.name		= name_s5pc100,
 	}, {
-		.idcode		= 0x43110000,
-		.idmask		= 0xfffff000,
+		.idcode		= S5PV210_CPU_ID,
+		.idmask		= S5PV210_CPU_MASK,
 		.map_io		= s5pv210_map_io,
 		.init_clocks	= s5pv210_init_clocks,
 		.init_uarts	= s5pv210_init_uarts,
 		.init		= s5pv210_init,
 		.name		= name_s5pv210,
 	}, {
-		.idcode		= 0x43210000,
-		.idmask		= 0xfffe0000,
+		.idcode		= EXYNOS4210_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
 		.map_io		= exynos4_map_io,
 		.init_clocks	= exynos4_init_clocks,
 		.init_uarts	= exynos4_init_uarts,
 		.init		= exynos4_init,
 		.name		= name_exynos4210,
+	}, {
+		.idcode		= EXYNOS4212_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4212,
+	}, {
+		.idcode		= EXYNOS4412_CPU_ID,
+		.idmask		= EXYNOS4_CPU_MASK,
+		.map_io		= exynos4_map_io,
+		.init_clocks	= exynos4_init_clocks,
+		.init_uarts	= exynos4_init_uarts,
+		.init		= exynos4_init,
+		.name		= name_exynos4412,
 	},
 };
 
@@ -114,13 +132,13 @@
 void __init s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr)
 {
-	unsigned long idcode;
-
 	/* initialize the io descriptors we need for initialization */
 	iotable_init(s5p_iodesc, ARRAY_SIZE(s5p_iodesc));
 	if (mach_desc)
 		iotable_init(mach_desc, size);
 
-	idcode = __raw_readl(cpuid_addr);
-	s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
+	/* detect cpu id and rev. */
+	s5p_init_cpu(cpuid_addr);
+
+	s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
 }
diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-s5p/include/plat/exynos4.h
index 907caab..f680a14 100644
--- a/arch/arm/plat-s5p/include/plat/exynos4.h
+++ b/arch/arm/plat-s5p/include/plat/exynos4.h
@@ -14,10 +14,11 @@
 
 extern void exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 extern void exynos4_register_clocks(void);
+extern void exynos4210_register_clocks(void);
+extern void exynos4212_register_clocks(void);
 extern void exynos4_setup_clocks(void);
 
-#ifdef CONFIG_CPU_EXYNOS4210
-
+#ifdef CONFIG_ARCH_EXYNOS4
 extern  int exynos4_init(void);
 extern void exynos4_init_irq(void);
 extern void exynos4_map_io(void);
diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-s5p/include/plat/pll.h
index bf28fad..1bfd61a 100644
--- a/arch/arm/plat-s5p/include/plat/pll.h
+++ b/arch/arm/plat-s5p/include/plat/pll.h
@@ -12,6 +12,59 @@
  * published by the Free Software Foundation.
 */
 
+#include <asm/div64.h>
+
+#define PLL35XX_MDIV_MASK	(0x3FF)
+#define PLL35XX_PDIV_MASK	(0x3F)
+#define PLL35XX_SDIV_MASK	(0x7)
+#define PLL35XX_MDIV_SHIFT	(16)
+#define PLL35XX_PDIV_SHIFT	(8)
+#define PLL35XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll35xx(unsigned long baseclk, u32 pll_con)
+{
+	u32 mdiv, pdiv, sdiv;
+	u64 fvco = baseclk;
+
+	mdiv = (pll_con >> PLL35XX_MDIV_SHIFT) & PLL35XX_MDIV_MASK;
+	pdiv = (pll_con >> PLL35XX_PDIV_SHIFT) & PLL35XX_PDIV_MASK;
+	sdiv = (pll_con >> PLL35XX_SDIV_SHIFT) & PLL35XX_SDIV_MASK;
+
+	fvco *= mdiv;
+	do_div(fvco, (pdiv << sdiv));
+
+	return (unsigned long)fvco;
+}
+
+#define PLL36XX_KDIV_MASK	(0xFFFF)
+#define PLL36XX_MDIV_MASK	(0x1FF)
+#define PLL36XX_PDIV_MASK	(0x3F)
+#define PLL36XX_SDIV_MASK	(0x7)
+#define PLL36XX_MDIV_SHIFT	(16)
+#define PLL36XX_PDIV_SHIFT	(8)
+#define PLL36XX_SDIV_SHIFT	(0)
+
+static inline unsigned long s5p_get_pll36xx(unsigned long baseclk,
+					    u32 pll_con0, u32 pll_con1)
+{
+	unsigned long result;
+	u32 mdiv, pdiv, sdiv, kdiv;
+	u64 tmp;
+
+	mdiv = (pll_con0 >> PLL36XX_MDIV_SHIFT) & PLL36XX_MDIV_MASK;
+	pdiv = (pll_con0 >> PLL36XX_PDIV_SHIFT) & PLL36XX_PDIV_MASK;
+	sdiv = (pll_con0 >> PLL36XX_SDIV_SHIFT) & PLL36XX_SDIV_MASK;
+	kdiv = pll_con1 & PLL36XX_KDIV_MASK;
+
+	tmp = baseclk;
+
+	tmp *= (mdiv << 16) + kdiv;
+	do_div(tmp, (pdiv << sdiv));
+	result = tmp >> 16;
+
+	return result;
+}
+
 #define PLL45XX_MDIV_MASK	(0x3FF)
 #define PLL45XX_PDIV_MASK	(0x3F)
 #define PLL45XX_SDIV_MASK	(0x7)
@@ -19,8 +72,6 @@
 #define PLL45XX_PDIV_SHIFT	(8)
 #define PLL45XX_SDIV_SHIFT	(0)
 
-#include <asm/div64.h>
-
 enum pll45xx_type_t {
 	pll_4500,
 	pll_4502,
diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c
index f71078e..f88216d 100644
--- a/arch/arm/plat-s5p/irq-gpioint.c
+++ b/arch/arm/plat-s5p/irq-gpioint.c
@@ -114,17 +114,18 @@
 {
 	static int used_gpioint_groups = 0;
 	int group = chip->group;
-	struct s5p_gpioint_bank *bank = NULL;
+	struct s5p_gpioint_bank *b, *bank = NULL;
 	struct irq_chip_generic *gc;
 	struct irq_chip_type *ct;
 
 	if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT)
 		return -ENOMEM;
 
-	list_for_each_entry(bank, &banks, list) {
-		if (group >= bank->start &&
-		    group < bank->start + bank->nr_groups)
+	list_for_each_entry(b, &banks, list) {
+		if (group >= b->start && group < b->start + b->nr_groups) {
+			bank = b;
 			break;
+		}
 	}
 	if (!bank)
 		return -EINVAL;
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764b..3de756d 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -11,7 +11,7 @@
 
 # Objects we always build independent of SoC choice
 
-obj-y				+= init.o
+obj-y				+= init.o cpu.o
 obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET)   += time.o
 obj-y				+= clock.o
 obj-y				+= pwm-clock.o
diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c
index 302c426..3b44519 100644
--- a/arch/arm/plat-samsung/clock.c
+++ b/arch/arm/plat-samsung/clock.c
@@ -64,6 +64,17 @@
  */
 DEFINE_SPINLOCK(clocks_lock);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+struct clk *s3c2410_wdtclk;
+static int __init s3c_wdt_reset_init(void)
+{
+	s3c2410_wdtclk = clk_get(NULL, "watchdog");
+	if (IS_ERR(s3c2410_wdtclk))
+		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	return 0;
+}
+arch_initcall(s3c_wdt_reset_init);
+
 /* enable and disable calls for use with the clk struct */
 
 static int clk_null_enable(struct clk *clk, int enable)
diff --git a/arch/arm/plat-samsung/cpu.c b/arch/arm/plat-samsung/cpu.c
new file mode 100644
index 0000000..81c06d4
--- /dev/null
+++ b/arch/arm/plat-samsung/cpu.c
@@ -0,0 +1,58 @@
+/* linux/arch/arm/plat-samsung/cpu.c
+ *
+ * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * Samsung CPU Support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/system.h>
+
+#include <mach/map.h>
+#include <plat/cpu.h>
+
+unsigned long samsung_cpu_id;
+static unsigned int samsung_cpu_rev;
+
+unsigned int samsung_rev(void)
+{
+	return samsung_cpu_rev;
+}
+EXPORT_SYMBOL(samsung_rev);
+
+void __init s3c24xx_init_cpu(void)
+{
+	/* nothing here yet */
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s3c64xx_init_cpu(void)
+{
+	samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0x118);
+	if (!samsung_cpu_id) {
+		/*
+		 * S3C6400 has the ID register in a different place,
+		 * and needs a write before it can be read.
+		 */
+		__raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+		samsung_cpu_id = __raw_readl(S3C_VA_SYS + 0xA1C);
+	}
+
+	samsung_cpu_rev = 0;
+}
+
+void __init s5p_init_cpu(void __iomem *cpuid_addr)
+{
+	samsung_cpu_id = __raw_readl(cpuid_addr);
+	samsung_cpu_rev = samsung_cpu_id & 0xFF;
+}
diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h
index 87d5b38..73c66d4 100644
--- a/arch/arm/plat-samsung/include/plat/clock.h
+++ b/arch/arm/plat-samsung/include/plat/clock.h
@@ -9,6 +9,9 @@
  * published by the Free Software Foundation.
 */
 
+#ifndef __ASM_PLAT_CLOCK_H
+#define __ASM_PLAT_CLOCK_H __FILE__
+
 #include <linux/spinlock.h>
 #include <linux/clkdev.h>
 
@@ -121,3 +124,8 @@
 
 extern void s3c_pwmclk_init(void);
 
+/* Global watchdog clock used by arch_wtd_reset() callback */
+
+extern struct clk *s3c2410_wdtclk;
+
+#endif /* __ASM_PLAT_CLOCK_H */
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index c0a5741..54f370f 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -1,9 +1,12 @@
 /* linux/arch/arm/plat-samsung/include/plat/cpu.h
  *
+ * Copyright (c) 2011 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
  * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
- * Header file for S3C24XX CPU support
+ * Header file for Samsung CPU support
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -15,6 +18,108 @@
 #ifndef __SAMSUNG_PLAT_CPU_H
 #define __SAMSUNG_PLAT_CPU_H
 
+extern unsigned long samsung_cpu_id;
+
+#define S3C24XX_CPU_ID		0x32400000
+#define S3C24XX_CPU_MASK	0xFFF00000
+
+#define S3C6400_CPU_ID		0x36400000
+#define S3C6410_CPU_ID		0x36410000
+#define S3C64XX_CPU_ID		(S3C6400_CPU_ID & S3C6410_CPU_ID)
+#define S3C64XX_CPU_MASK	0xFFFFF000
+
+#define S5P6440_CPU_ID		0x56440000
+#define S5P6450_CPU_ID		0x36450000
+#define S5P64XX_CPU_MASK	0xFFFFF000
+
+#define S5PC100_CPU_ID		0x43100000
+#define S5PC100_CPU_MASK	0xFFFFF000
+
+#define S5PV210_CPU_ID		0x43110000
+#define S5PV210_CPU_MASK	0xFFFFF000
+
+#define EXYNOS4210_CPU_ID	0x43210000
+#define EXYNOS4212_CPU_ID	0x43220000
+#define EXYNOS4412_CPU_ID	0xE4412200
+#define EXYNOS4_CPU_MASK	0xFFFE0000
+
+#define IS_SAMSUNG_CPU(name, id, mask)		\
+static inline int is_samsung_##name(void)	\
+{						\
+	return ((samsung_cpu_id & mask) == (id & mask));	\
+}
+
+IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
+IS_SAMSUNG_CPU(s3c64xx, S3C64XX_CPU_ID, S3C64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6440, S5P6440_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5p6450, S5P6450_CPU_ID, S5P64XX_CPU_MASK)
+IS_SAMSUNG_CPU(s5pc100, S5PC100_CPU_ID, S5PC100_CPU_MASK)
+IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
+    defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
+    defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
+    defined(CONFIG_CPU_S3C2443)
+# define soc_is_s3c24xx()	is_samsung_s3c24xx()
+#else
+# define soc_is_s3c24xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410)
+# define soc_is_s3c64xx()	is_samsung_s3c64xx()
+#else
+# define soc_is_s3c64xx()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6440)
+# define soc_is_s5p6440()	is_samsung_s5p6440()
+#else
+# define soc_is_s5p6440()	0
+#endif
+
+#if defined(CONFIG_CPU_S5P6450)
+# define soc_is_s5p6450()	is_samsung_s5p6450()
+#else
+# define soc_is_s5p6450()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PC100)
+# define soc_is_s5pc100()	is_samsung_s5pc100()
+#else
+# define soc_is_s5pc100()	0
+#endif
+
+#if defined(CONFIG_CPU_S5PV210)
+# define soc_is_s5pv210()	is_samsung_s5pv210()
+#else
+# define soc_is_s5pv210()	0
+#endif
+
+#if defined(CONFIG_CPU_EXYNOS4210)
+# define soc_is_exynos4210()	is_samsung_exynos4210()
+#else
+# define soc_is_exynos4210()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4212)
+# define soc_is_exynos4212()	is_samsung_exynos4212()
+#else
+# define soc_is_exynos4212()	0
+#endif
+
+#if defined(CONFIG_SOC_EXYNOS4412)
+# define soc_is_exynos4412()	is_samsung_exynos4412()
+#else
+# define soc_is_exynos4412()	0
+#endif
+
+#define EXYNOS4210_REV_0	(0x0)
+#define EXYNOS4210_REV_1_0	(0x10)
+#define EXYNOS4210_REV_1_1	(0x11)
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -55,6 +160,12 @@
 extern void s5p_init_io(struct map_desc *mach_desc,
 			int size, void __iomem *cpuid_addr);
 
+extern void s3c24xx_init_cpu(void);
+extern void s3c64xx_init_cpu(void);
+extern void s5p_init_cpu(void __iomem *cpuid_addr);
+
+extern unsigned int samsung_rev(void);
+
 extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
 
 extern void s3c24xx_init_clocks(int xtal);
diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
index 54b762a..40dbb2b 100644
--- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h
+++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h
@@ -10,6 +10,7 @@
  * published by the Free Software Foundation.
 */
 
+#include <plat/clock.h>
 #include <plat/regs-watchdog.h>
 #include <mach/map.h>
 
@@ -19,17 +20,12 @@
 
 static inline void arch_wdt_reset(void)
 {
-	struct clk *wdtclk;
-
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
 
-	wdtclk = clk_get(NULL, "watchdog");
-	if (!IS_ERR(wdtclk)) {
-		clk_enable(wdtclk);
-	} else
-		printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+	if (s3c2410_wdtclk)
+		clk_enable(s3c2410_wdtclk);
 
 	/* put initial values into count and data */
 	__raw_writel(0x80, S3C2410_WTCNT);
diff --git a/arch/arm/plat-spear/include/plat/gpio.h b/arch/arm/plat-spear/include/plat/gpio.h
index b857c91..40a8c178 100644
--- a/arch/arm/plat-spear/include/plat/gpio.h
+++ b/arch/arm/plat-spear/include/plat/gpio.h
@@ -1,24 +1 @@
-/*
- * arch/arm/plat-spear/include/plat/gpio.h
- *
- * GPIO macros for SPEAr platform
- *
- * Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __PLAT_GPIO_H
-#define __PLAT_GPIO_H
-
-#include <asm-generic/gpio.h>
-
-#define gpio_get_value	__gpio_get_value
-#define gpio_set_value	__gpio_set_value
-#define gpio_cansleep	__gpio_cansleep
-#define gpio_to_irq	__gpio_to_irq
-
-#endif /* __PLAT_GPIO_H */
+/* empty */
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 5cc8385..31a7d3a 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -561,6 +561,20 @@
 	.write = u4_pcie_write_config,
 };
 
+static void __devinit pmac_pci_fixup_u4_of_node(struct pci_dev *dev)
+{
+	/* Apple's device-tree "hides" the root complex virtual P2P bridge
+	 * on U4. However, Linux sees it, causing the PCI <-> OF matching
+	 * code to fail to properly match devices below it. This works around
+	 * it by setting the node of the bridge to point to the PHB node,
+	 * which is not entirely correct but fixes the matching code and
+	 * doesn't break anything else. It's also the simplest possible fix.
+	 */
+	if (dev->dev.of_node == NULL)
+		dev->dev.of_node = pcibios_get_phb_of_node(dev->bus);
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_APPLE, 0x5b, pmac_pci_fixup_u4_of_node);
+
 #endif /* CONFIG_PPC64 */
 
 #ifdef CONFIG_PPC32
diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h
index 64b61bf..547f1a6 100644
--- a/arch/s390/include/asm/elf.h
+++ b/arch/s390/include/asm/elf.h
@@ -188,7 +188,8 @@
 #define SET_PERSONALITY(ex)					\
 do {								\
 	if (personality(current->personality) != PER_LINUX32)	\
-		set_personality(PER_LINUX);			\
+		set_personality(PER_LINUX |			\
+			(current->personality & ~PER_MASK));	\
 	if ((ex).e_ident[EI_CLASS] == ELFCLASS32)		\
 		set_thread_flag(TIF_31BIT);			\
 	else							\
diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h
index 519eb5f..c0cb794 100644
--- a/arch/s390/include/asm/pgtable.h
+++ b/arch/s390/include/asm/pgtable.h
@@ -658,12 +658,14 @@
  * struct gmap_struct - guest address space
  * @mm: pointer to the parent mm_struct
  * @table: pointer to the page directory
+ * @asce: address space control element for gmap page table
  * @crst_list: list of all crst tables used in the guest address space
  */
 struct gmap {
 	struct list_head list;
 	struct mm_struct *mm;
 	unsigned long *table;
+	unsigned long asce;
 	struct list_head crst_list;
 };
 
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 532fd43..2b45591 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -10,6 +10,7 @@
 #include <linux/sched.h>
 #include <asm/vdso.h>
 #include <asm/sigp.h>
+#include <asm/pgtable.h>
 
 /*
  * Make sure that the compiler is new enough. We want a compiler that
@@ -126,6 +127,7 @@
 	DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack));
 	DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack));
 	DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack));
+	DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce));
 	DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock));
 	DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock));
 	DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags));
@@ -151,6 +153,7 @@
 	DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data));
 	DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap));
 	DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp));
+	DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce));
 #endif /* CONFIG_32BIT */
 	return 0;
 }
diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S
index 5f729d6..713da07 100644
--- a/arch/s390/kernel/entry64.S
+++ b/arch/s390/kernel/entry64.S
@@ -1076,6 +1076,11 @@
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 	tm	__TI_flags+7(%r14),_TIF_EXIT_SIE
 	jnz	sie_exit
+	lg	%r14,__LC_GMAP			# get gmap pointer
+	ltgr	%r14,%r14
+	jz	sie_gmap
+	lctlg	%c1,%c1,__GMAP_ASCE(%r14)	# load primary asce
+sie_gmap:
 	lg	%r14,__SF_EMPTY(%r15)		# get control block pointer
 	SPP	__SF_EMPTY(%r15)		# set guest id
 	sie	0(%r14)
@@ -1083,6 +1088,7 @@
 	SPP	__LC_CMF_HPP			# set host id
 	lg	%r14,__LC_THREAD_INFO		# pointer thread_info struct
 sie_exit:
+	lctlg	%c1,%c1,__LC_USER_ASCE		# load primary asce
 	ni	__TI_flags+6(%r14),255-(_TIF_SIE>>8)
 	lg	%r14,__SF_EMPTY+8(%r15)		# load guest register save area
 	stmg	%r0,%r13,0(%r14)		# save guest gprs 0-13
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index f17296e..dc2b580 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -123,6 +123,7 @@
 
 	switch (ext) {
 	case KVM_CAP_S390_PSW:
+	case KVM_CAP_S390_GMAP:
 		r = 1;
 		break;
 	default:
@@ -263,10 +264,12 @@
 	vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK;
 	restore_fp_regs(&vcpu->arch.guest_fpregs);
 	restore_access_regs(vcpu->arch.guest_acrs);
+	gmap_enable(vcpu->arch.gmap);
 }
 
 void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 {
+	gmap_disable(vcpu->arch.gmap);
 	save_fp_regs(&vcpu->arch.guest_fpregs);
 	save_access_regs(vcpu->arch.guest_acrs);
 	restore_fp_regs(&vcpu->arch.host_fpregs);
@@ -461,7 +464,6 @@
 	local_irq_disable();
 	kvm_guest_enter();
 	local_irq_enable();
-	gmap_enable(vcpu->arch.gmap);
 	VCPU_EVENT(vcpu, 6, "entering sie flags %x",
 		   atomic_read(&vcpu->arch.sie_block->cpuflags));
 	if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
@@ -470,7 +472,6 @@
 	}
 	VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
 		   vcpu->arch.sie_block->icptcode);
-	gmap_disable(vcpu->arch.gmap);
 	local_irq_disable();
 	kvm_guest_exit();
 	local_irq_enable();
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 4d1f2bc..5d56c2b 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -160,6 +160,8 @@
 	table = (unsigned long *) page_to_phys(page);
 	crst_table_init(table, _REGION1_ENTRY_EMPTY);
 	gmap->table = table;
+	gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
+		     _ASCE_USER_BITS | __pa(table);
 	list_add(&gmap->list, &mm->context.gmap_list);
 	return gmap;
 
@@ -240,10 +242,6 @@
  */
 void gmap_enable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH |
-				 _ASCE_USER_BITS | __pa(gmap->table);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = (unsigned long) gmap;
 }
 EXPORT_SYMBOL_GPL(gmap_enable);
@@ -254,10 +252,6 @@
  */
 void gmap_disable(struct gmap *gmap)
 {
-	/* Load primary space page table origin. */
-	S390_lowcore.user_asce =
-		gmap->mm->context.asce_bits | __pa(gmap->mm->pgd);
-	asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) );
 	S390_lowcore.gmap = 0UL;
 }
 EXPORT_SYMBOL_GPL(gmap_disable);
@@ -309,15 +303,15 @@
 		/* Walk the guest addr space page table */
 		table = gmap->table + (((to + off) >> 53) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 42) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 31) & 0x7ff);
 		if (*table & _REGION_ENTRY_INV)
-			return 0;
+			goto out;
 		table = (unsigned long *)(*table & _REGION_ENTRY_ORIGIN);
 		table = table + (((to + off) >> 20) & 0x7ff);
 
@@ -325,6 +319,7 @@
 		flush |= gmap_unlink_segment(gmap, table);
 		*table = _SEGMENT_ENTRY_INV;
 	}
+out:
 	up_read(&gmap->mm->mmap_sem);
 	if (flush)
 		gmap_flush_tlb(gmap);
diff --git a/arch/sparc/include/asm/spitfire.h b/arch/sparc/include/asm/spitfire.h
index 55a17c6..d06a2660 100644
--- a/arch/sparc/include/asm/spitfire.h
+++ b/arch/sparc/include/asm/spitfire.h
@@ -43,6 +43,8 @@
 #define SUN4V_CHIP_NIAGARA1	0x01
 #define SUN4V_CHIP_NIAGARA2	0x02
 #define SUN4V_CHIP_NIAGARA3	0x03
+#define SUN4V_CHIP_NIAGARA4	0x04
+#define SUN4V_CHIP_NIAGARA5	0x05
 #define SUN4V_CHIP_UNKNOWN	0xff
 
 #ifndef __ASSEMBLY__
diff --git a/arch/sparc/include/asm/xor_64.h b/arch/sparc/include/asm/xor_64.h
index 9ed6ff6..ee8edc6 100644
--- a/arch/sparc/include/asm/xor_64.h
+++ b/arch/sparc/include/asm/xor_64.h
@@ -66,6 +66,8 @@
 	((tlb_type == hypervisor && \
 	  (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 || \
 	   sun4v_chip_type == SUN4V_CHIP_NIAGARA2 || \
-	   sun4v_chip_type == SUN4V_CHIP_NIAGARA3)) ? \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA3 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA4 || \
+	   sun4v_chip_type == SUN4V_CHIP_NIAGARA5)) ? \
 	 &xor_block_niagara : \
 	 &xor_block_VIS)
diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c
index 9810fd8..ba9b1ce 100644
--- a/arch/sparc/kernel/cpu.c
+++ b/arch/sparc/kernel/cpu.c
@@ -481,6 +481,18 @@
 		sparc_pmu_type = "niagara3";
 		break;
 
+	case SUN4V_CHIP_NIAGARA4:
+		sparc_cpu_type = "UltraSparc T4 (Niagara4)";
+		sparc_fpu_type = "UltraSparc T4 integrated FPU";
+		sparc_pmu_type = "niagara4";
+		break;
+
+	case SUN4V_CHIP_NIAGARA5:
+		sparc_cpu_type = "UltraSparc T5 (Niagara5)";
+		sparc_fpu_type = "UltraSparc T5 integrated FPU";
+		sparc_pmu_type = "niagara5";
+		break;
+
 	default:
 		printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
 		       prom_cpu_compatible);
diff --git a/arch/sparc/kernel/cpumap.c b/arch/sparc/kernel/cpumap.c
index 4197e8d..9323eaf 100644
--- a/arch/sparc/kernel/cpumap.c
+++ b/arch/sparc/kernel/cpumap.c
@@ -325,6 +325,8 @@
 	case SUN4V_CHIP_NIAGARA1:
 	case SUN4V_CHIP_NIAGARA2:
 	case SUN4V_CHIP_NIAGARA3:
+	case SUN4V_CHIP_NIAGARA4:
+	case SUN4V_CHIP_NIAGARA5:
 		rover_inc_table = niagara_iterate_method;
 		break;
 	default:
diff --git a/arch/sparc/kernel/head_64.S b/arch/sparc/kernel/head_64.S
index 0eac1b2..0d810c2 100644
--- a/arch/sparc/kernel/head_64.S
+++ b/arch/sparc/kernel/head_64.S
@@ -133,7 +133,7 @@
 prom_niagara_prefix:
 	.asciz	"SUNW,UltraSPARC-T"
 prom_sparc_prefix:
-	.asciz	"SPARC-T"
+	.asciz	"SPARC-"
 	.align	4
 prom_root_compatible:
 	.skip	64
@@ -396,7 +396,7 @@
 	or	%g1, %lo(prom_cpu_compatible), %g1
 	sethi	%hi(prom_sparc_prefix), %g7
 	or	%g7, %lo(prom_sparc_prefix), %g7
-	mov	7, %g3
+	mov	6, %g3
 90:	ldub	[%g7], %g2
 	ldub	[%g1], %g4
 	cmp	%g2, %g4
@@ -408,10 +408,23 @@
 
 	sethi	%hi(prom_cpu_compatible), %g1
 	or	%g1, %lo(prom_cpu_compatible), %g1
-	ldub	[%g1 + 7], %g2
+	ldub	[%g1 + 6], %g2
+	cmp	%g2, 'T'
+	be,pt	%xcc, 70f
+	 cmp	%g2, 'M'
+	bne,pn	%xcc, 4f
+	 nop
+
+70:	ldub	[%g1 + 7], %g2
 	cmp	%g2, '3'
 	be,pt	%xcc, 5f
 	 mov	SUN4V_CHIP_NIAGARA3, %g4
+	cmp	%g2, '4'
+	be,pt	%xcc, 5f
+	 mov	SUN4V_CHIP_NIAGARA4, %g4
+	cmp	%g2, '5'
+	be,pt	%xcc, 5f
+	 mov	SUN4V_CHIP_NIAGARA5, %g4
 	ba,pt	%xcc, 4f
 	 nop
 
@@ -545,6 +558,12 @@
 	cmp	%g1, SUN4V_CHIP_NIAGARA3
 	be,pt	%xcc, niagara2_patch
 	 nop
+	cmp	%g1, SUN4V_CHIP_NIAGARA4
+	be,pt	%xcc, niagara2_patch
+	 nop
+	cmp	%g1, SUN4V_CHIP_NIAGARA5
+	be,pt	%xcc, niagara2_patch
+	 nop
 
 	call	generic_patch_copyops
 	 nop
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index c8cc461..f793742 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -380,8 +380,7 @@
 #endif
 	}
 
-	/* Now, this task is no longer a kernel thread. */
-	current->thread.current_ds = USER_DS;
+	/* This task is no longer a kernel thread. */
 	if (current->thread.flags & SPARC_FLAG_KTHREAD) {
 		current->thread.flags &= ~SPARC_FLAG_KTHREAD;
 
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index c158a95..d959cd0 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -368,9 +368,6 @@
 
 	/* Clear FPU register state. */
 	t->fpsaved[0] = 0;
-	
-	if (get_thread_current_ds() != ASI_AIUS)
-		set_fs(USER_DS);
 }
 
 /* It's a bit more tricky when 64-bit tasks are involved... */
diff --git a/arch/sparc/kernel/setup_32.c b/arch/sparc/kernel/setup_32.c
index d26e1f6..3e3e291 100644
--- a/arch/sparc/kernel/setup_32.c
+++ b/arch/sparc/kernel/setup_32.c
@@ -137,7 +137,7 @@
 		prom_halt();
 		break;
 	case 'p':
-		/* Just ignore, this behavior is now the default.  */
+		prom_early_console.flags &= ~CON_BOOT;
 		break;
 	default:
 		printk("Unknown boot switch (-%c)\n", c);
diff --git a/arch/sparc/kernel/setup_64.c b/arch/sparc/kernel/setup_64.c
index 3c5bb78..c965595a 100644
--- a/arch/sparc/kernel/setup_64.c
+++ b/arch/sparc/kernel/setup_64.c
@@ -106,7 +106,7 @@
 		prom_halt();
 		break;
 	case 'p':
-		/* Just ignore, this behavior is now the default.  */
+		prom_early_console.flags &= ~CON_BOOT;
 		break;
 	case 'P':
 		/* Force UltraSPARC-III P-Cache on. */
@@ -425,10 +425,14 @@
 	else if (tlb_type == hypervisor) {
 		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1 ||
 		    sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 			cap |= HWCAP_SPARC_BLKINIT;
 		if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+		    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 			cap |= HWCAP_SPARC_N2;
 	}
 
@@ -452,11 +456,15 @@
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA1)
 				cap |= AV_SPARC_ASI_BLK_INIT;
 			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA2 ||
-			    sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 				cap |= (AV_SPARC_VIS | AV_SPARC_VIS2 |
 					AV_SPARC_ASI_BLK_INIT |
 					AV_SPARC_POPC);
-			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3)
+			if (sun4v_chip_type == SUN4V_CHIP_NIAGARA3 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA4 ||
+			    sun4v_chip_type == SUN4V_CHIP_NIAGARA5)
 				cap |= (AV_SPARC_VIS3 | AV_SPARC_HPC |
 					AV_SPARC_FMAF);
 		}
diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c
index 581531d..8e073d8 100644
--- a/arch/sparc/mm/init_64.c
+++ b/arch/sparc/mm/init_64.c
@@ -511,6 +511,11 @@
 		for (i = 0; i < prom_trans_ents; i++)
 			prom_trans[i].data &= ~0x0003fe0000000000UL;
 	}
+
+	/* Force execute bit on.  */
+	for (i = 0; i < prom_trans_ents; i++)
+		prom_trans[i].data |= (tlb_type == hypervisor ?
+				       _PAGE_EXEC_4V : _PAGE_EXEC_4U);
 }
 
 static void __init hypervisor_tlb_lock(unsigned long vaddr,
diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86
index d31ecf3..21bebe6 100644
--- a/arch/um/Kconfig.x86
+++ b/arch/um/Kconfig.x86
@@ -10,6 +10,10 @@
 	bool
 	default n
 
+config CMPXCHG_DOUBLE
+	bool
+	default n
+
 source "arch/x86/Kconfig.cpu"
 
 endmenu
diff --git a/arch/um/Makefile b/arch/um/Makefile
index fab8121..c0f712c 100644
--- a/arch/um/Makefile
+++ b/arch/um/Makefile
@@ -41,7 +41,7 @@
 KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \
 	$(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap	\
 	-Din6addr_loopback=kernel_in6addr_loopback \
-	-Din6addr_any=kernel_in6addr_any
+	-Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr
 
 KBUILD_AFLAGS += $(ARCH_INCLUDE)
 
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index d51c404..364c8a1 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -399,8 +399,8 @@
  * is done under a spinlock.  Checking whether the device is in use is
  * line->tty->count > 1, also under the spinlock.
  *
- * tty->count serves to decide whether the device should be enabled or
- * disabled on the host.  If it's equal to 1, then we are doing the
+ * line->count serves to decide whether the device should be enabled or
+ * disabled on the host.  If it's equal to 0, then we are doing the
  * first open or last close.  Otherwise, open and close just return.
  */
 
@@ -414,16 +414,16 @@
 		goto out_unlock;
 
 	err = 0;
-	if (tty->count > 1)
+	if (line->count++)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
+	BUG_ON(tty->driver_data);
 	tty->driver_data = line;
 	line->tty = tty;
 
+	spin_unlock(&line->count_lock);
 	err = enable_chan(line);
-	if (err)
+	if (err) /* line_close() will be called by our caller */
 		return err;
 
 	INIT_DELAYED_WORK(&line->task, line_timer_cb);
@@ -436,7 +436,7 @@
 	chan_window_size(&line->chan_list, &tty->winsize.ws_row,
 			 &tty->winsize.ws_col);
 
-	return err;
+	return 0;
 
 out_unlock:
 	spin_unlock(&line->count_lock);
@@ -460,17 +460,16 @@
 	flush_buffer(line);
 
 	spin_lock(&line->count_lock);
-	if (!line->valid)
-		goto out_unlock;
+	BUG_ON(!line->valid);
 
-	if (tty->count > 1)
+	if (--line->count)
 		goto out_unlock;
 
-	spin_unlock(&line->count_lock);
-
 	line->tty = NULL;
 	tty->driver_data = NULL;
 
+	spin_unlock(&line->count_lock);
+
 	if (line->sigio) {
 		unregister_winch(tty);
 		line->sigio = 0;
@@ -498,7 +497,7 @@
 
 	spin_lock(&line->count_lock);
 
-	if (line->tty != NULL) {
+	if (line->count) {
 		*error_out = "Device is already open";
 		goto out;
 	}
@@ -722,41 +721,53 @@
 	int pid;
 	struct tty_struct *tty;
 	unsigned long stack;
+	struct work_struct work;
 };
 
-static void free_winch(struct winch *winch, int free_irq_ok)
+static void __free_winch(struct work_struct *work)
 {
-	if (free_irq_ok)
-		free_irq(WINCH_IRQ, winch);
-
-	list_del(&winch->list);
+	struct winch *winch = container_of(work, struct winch, work);
+	free_irq(WINCH_IRQ, winch);
 
 	if (winch->pid != -1)
 		os_kill_process(winch->pid, 1);
-	if (winch->fd != -1)
-		os_close_file(winch->fd);
 	if (winch->stack != 0)
 		free_stack(winch->stack, 0);
 	kfree(winch);
 }
 
+static void free_winch(struct winch *winch)
+{
+	int fd = winch->fd;
+	winch->fd = -1;
+	if (fd != -1)
+		os_close_file(fd);
+	list_del(&winch->list);
+	__free_winch(&winch->work);
+}
+
 static irqreturn_t winch_interrupt(int irq, void *data)
 {
 	struct winch *winch = data;
 	struct tty_struct *tty;
 	struct line *line;
+	int fd = winch->fd;
 	int err;
 	char c;
 
-	if (winch->fd != -1) {
-		err = generic_read(winch->fd, &c, NULL);
+	if (fd != -1) {
+		err = generic_read(fd, &c, NULL);
 		if (err < 0) {
 			if (err != -EAGAIN) {
+				winch->fd = -1;
+				list_del(&winch->list);
+				os_close_file(fd);
 				printk(KERN_ERR "winch_interrupt : "
 				       "read failed, errno = %d\n", -err);
 				printk(KERN_ERR "fd %d is losing SIGWINCH "
 				       "support\n", winch->tty_fd);
-				free_winch(winch, 0);
+				INIT_WORK(&winch->work, __free_winch);
+				schedule_work(&winch->work);
 				return IRQ_HANDLED;
 			}
 			goto out;
@@ -828,7 +839,7 @@
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
 		if (winch->tty == tty) {
-			free_winch(winch, 1);
+			free_winch(winch);
 			break;
 		}
 	}
@@ -844,7 +855,7 @@
 
 	list_for_each_safe(ele, next, &winch_handlers) {
 		winch = list_entry(ele, struct winch, list);
-		free_winch(winch, 1);
+		free_winch(winch);
 	}
 
 	spin_unlock(&winch_handler_lock);
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8ac7146..2e1de57 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -123,6 +123,7 @@
 		err = -errno;
 		printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
 		       errno);
+		close(fd);
 		return err;
 	}
 	close(fd);
diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h
index ae084ad..1a7d275 100644
--- a/arch/um/include/asm/ptrace-generic.h
+++ b/arch/um/include/asm/ptrace-generic.h
@@ -42,10 +42,6 @@
 	unsigned long addr, unsigned long data);
 extern unsigned long getreg(struct task_struct *child, int regno);
 extern int putreg(struct task_struct *child, int regno, unsigned long value);
-extern int get_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
-extern int set_fpregs(struct user_i387_struct __user *buf,
-		      struct task_struct *child);
 
 extern int arch_copy_tls(struct task_struct *new);
 extern void clear_flushed_tls(struct task_struct *task);
diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h
index 72f4f25..63df3ca 100644
--- a/arch/um/include/shared/line.h
+++ b/arch/um/include/shared/line.h
@@ -33,6 +33,7 @@
 struct line {
 	struct tty_struct *tty;
 	spinlock_t count_lock;
+	unsigned long count;
 	int valid;
 
 	char *init_str;
diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h
index b0b4589..f1e0aa5 100644
--- a/arch/um/include/shared/registers.h
+++ b/arch/um/include/shared/registers.h
@@ -16,7 +16,7 @@
 extern int save_registers(int pid, struct uml_pt_regs *regs);
 extern int restore_registers(int pid, struct uml_pt_regs *regs);
 extern int init_registers(int pid);
-extern void get_safe_registers(unsigned long *regs);
+extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs);
 extern unsigned long get_thread_reg(int reg, jmp_buf *buf);
 extern int get_fp_registers(int pid, unsigned long *regs);
 extern int put_fp_registers(int pid, unsigned long *regs);
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index fab4371..21c1ae7 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -202,7 +202,7 @@
 		arch_copy_thread(&current->thread.arch, &p->thread.arch);
 	}
 	else {
-		get_safe_registers(p->thread.regs.regs.gp);
+		get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp);
 		p->thread.request.u.thread = current->thread.request.u.thread;
 		handler = new_thread_handler;
 	}
diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c
index 701b672..c9da32b 100644
--- a/arch/um/kernel/ptrace.c
+++ b/arch/um/kernel/ptrace.c
@@ -50,23 +50,11 @@
 	void __user *vp = p;
 
 	switch (request) {
-	/* read word at location addr. */
-	case PTRACE_PEEKTEXT:
-	case PTRACE_PEEKDATA:
-		ret = generic_ptrace_peekdata(child, addr, data);
-		break;
-
 	/* read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR:
 		ret = peek_user(child, addr, data);
 		break;
 
-	/* write the word at location addr. */
-	case PTRACE_POKETEXT:
-	case PTRACE_POKEDATA:
-		ret = generic_ptrace_pokedata(child, addr, data);
-		break;
-
 	/* write the word at location addr in the USER area */
 	case PTRACE_POKEUSR:
 		ret = poke_user(child, addr, data);
@@ -107,16 +95,6 @@
 		break;
 	}
 #endif
-#ifdef PTRACE_GETFPREGS
-	case PTRACE_GETFPREGS: /* Get the child FPU state. */
-		ret = get_fpregs(vp, child);
-		break;
-#endif
-#ifdef PTRACE_SETFPREGS
-	case PTRACE_SETFPREGS: /* Set the child FPU state. */
-		ret = set_fpregs(vp, child);
-		break;
-#endif
 	case PTRACE_GET_THREAD_AREA:
 		ret = ptrace_get_thread_area(child, addr, vp);
 		break;
@@ -154,12 +132,6 @@
 		break;
 	}
 #endif
-#ifdef PTRACE_ARCH_PRCTL
-	case PTRACE_ARCH_PRCTL:
-		/* XXX Calls ptrace on the host - needs some SMP thinking */
-		ret = arch_prctl(child, data, (void __user *) addr);
-		break;
-#endif
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		if (ret == -EIO)
diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c
index 830fe6a..b866b9e 100644
--- a/arch/um/os-Linux/registers.c
+++ b/arch/um/os-Linux/registers.c
@@ -8,6 +8,8 @@
 #include <string.h>
 #include <sys/ptrace.h>
 #include "sysdep/ptrace.h"
+#include "sysdep/ptrace_user.h"
+#include "registers.h"
 
 int save_registers(int pid, struct uml_pt_regs *regs)
 {
@@ -32,6 +34,7 @@
 /* This is set once at boot time and not changed thereafter */
 
 static unsigned long exec_regs[MAX_REG_NR];
+static unsigned long exec_fp_regs[FP_SIZE];
 
 int init_registers(int pid)
 {
@@ -42,10 +45,14 @@
 		return -errno;
 
 	arch_init_registers(pid);
+	get_fp_registers(pid, exec_fp_regs);
 	return 0;
 }
 
-void get_safe_registers(unsigned long *regs)
+void get_safe_registers(unsigned long *regs, unsigned long *fp_regs)
 {
 	memcpy(regs, exec_regs, sizeof(exec_regs));
+
+	if (fp_regs)
+		memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs));
 }
diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c
index d261f17..e771398 100644
--- a/arch/um/os-Linux/skas/mem.c
+++ b/arch/um/os-Linux/skas/mem.c
@@ -39,7 +39,7 @@
 
 static int __init init_syscall_regs(void)
 {
-	get_safe_registers(syscall_regs);
+	get_safe_registers(syscall_regs, NULL);
 	syscall_regs[REGS_IP_INDEX] = STUB_CODE +
 		((unsigned long) &batch_syscall_stub -
 		 (unsigned long) &__syscall_stub_start);
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index d6e0a22..dee0e8c 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -373,6 +373,9 @@
 		if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp))
 			fatal_sigsegv();
 
+		if (put_fp_registers(pid, regs->fp))
+			fatal_sigsegv();
+
 		/* Now we set local_using_sysemu to be used for one loop */
 		local_using_sysemu = get_using_sysemu();
 
@@ -399,6 +402,12 @@
 			fatal_sigsegv();
 		}
 
+		if (get_fp_registers(pid, regs->fp)) {
+			printk(UM_KERN_ERR "userspace -  get_fp_registers failed, "
+			       "errno = %d\n", errno);
+			fatal_sigsegv();
+		}
+
 		UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */
 
 		if (WIFSTOPPED(status)) {
@@ -457,10 +466,11 @@
 }
 
 static unsigned long thread_regs[MAX_REG_NR];
+static unsigned long thread_fp_regs[FP_SIZE];
 
 static int __init init_thread_regs(void)
 {
-	get_safe_registers(thread_regs);
+	get_safe_registers(thread_regs, thread_fp_regs);
 	/* Set parent's instruction pointer to start of clone-stub */
 	thread_regs[REGS_IP_INDEX] = STUB_CODE +
 				(unsigned long) stub_clone_handler -
@@ -503,6 +513,13 @@
 		return err;
 	}
 
+	err = put_fp_registers(pid, thread_fp_regs);
+	if (err < 0) {
+		printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers "
+		       "failed, pid = %d, err = %d\n", pid, err);
+		return err;
+	}
+
 	/* set a well known return code for detection of child write failure */
 	child_data->err = 12345678;
 
diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h
index 0273e4d..5d2a591 100644
--- a/arch/um/sys-i386/asm/ptrace.h
+++ b/arch/um/sys-i386/asm/ptrace.h
@@ -42,11 +42,6 @@
  */
 struct user_desc;
 
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *child);
-extern int set_fpxregs(struct user_fxsr_struct __user *buf,
-		       struct task_struct *tsk);
-
 extern int ptrace_get_thread_area(struct task_struct *child, int idx,
                                   struct user_desc __user *user_desc);
 
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index d23b2d3..3375c27 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -145,7 +145,7 @@
 	return put_user(tmp, (unsigned long __user *) data);
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -161,7 +161,7 @@
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_i387_struct fpregs;
@@ -174,7 +174,7 @@
 				    (unsigned long *) &fpregs);
 }
 
-int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -190,7 +190,7 @@
 	return n;
 }
 
-int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
+static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	struct user_fxsr_struct fpregs;
@@ -206,5 +206,23 @@
 long subarch_ptrace(struct task_struct *child, long request,
 		    unsigned long addr, unsigned long data)
 {
-	return -EIO;
+	int ret = -EIO;
+	void __user *datap = (void __user *) data;
+	switch (request) {
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
+		ret = get_fpregs(datap, child);
+		break;
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
+		ret = set_fpregs(datap, child);
+		break;
+	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+		ret = get_fpxregs(datap, child);
+		break;
+	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+		ret = set_fpxregs(datap, child);
+		break;
+	default:
+		ret = -EIO;
+	}
+	return ret;
 }
diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h
index d50e62e..c398a50 100644
--- a/arch/um/sys-i386/shared/sysdep/ptrace.h
+++ b/arch/um/sys-i386/shared/sysdep/ptrace.h
@@ -53,6 +53,7 @@
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FPX_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;
diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c
index f436136..4005506 100644
--- a/arch/um/sys-x86_64/ptrace.c
+++ b/arch/um/sys-x86_64/ptrace.c
@@ -145,7 +145,7 @@
 	return instr == 0x050f;
 }
 
-int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -162,7 +162,7 @@
 	return n;
 }
 
-int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
+static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
 {
 	int n, cpu = ((struct thread_info *) child->stack)->cpu;
 	long fpregs[HOST_FP_SIZE];
@@ -182,12 +182,16 @@
 	void __user *datap = (void __user *) data;
 
 	switch (request) {
-	case PTRACE_GETFPXREGS: /* Get the child FPU state. */
+	case PTRACE_GETFPREGS: /* Get the child FPU state. */
 		ret = get_fpregs(datap, child);
 		break;
-	case PTRACE_SETFPXREGS: /* Set the child FPU state. */
+	case PTRACE_SETFPREGS: /* Set the child FPU state. */
 		ret = set_fpregs(datap, child);
 		break;
+	case PTRACE_ARCH_PRCTL:
+		/* XXX Calls ptrace on the host - needs some SMP thinking */
+		ret = arch_prctl(child, data, (void __user *) addr);
+		break;
 	}
 
 	return ret;
diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
index fdba545..8ee8f8e 100644
--- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h
+++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h
@@ -85,6 +85,7 @@
 
 struct uml_pt_regs {
 	unsigned long gp[MAX_REG_NR];
+	unsigned long fp[HOST_FP_SIZE];
 	struct faultinfo faultinfo;
 	long syscall;
 	int is_user;
diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h
index 4554cc6..091508b 100644
--- a/arch/x86/include/asm/alternative-asm.h
+++ b/arch/x86/include/asm/alternative-asm.h
@@ -16,7 +16,6 @@
 #endif
 
 .macro altinstruction_entry orig alt feature orig_len alt_len
-	.align 8
 	.long \orig - .
 	.long \alt - .
 	.word \feature
diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h
index 23fb6d7..37ad100 100644
--- a/arch/x86/include/asm/alternative.h
+++ b/arch/x86/include/asm/alternative.h
@@ -48,9 +48,6 @@
 	u16 cpuid;		/* cpuid bit set for replacement */
 	u8  instrlen;		/* length of original instruction */
 	u8  replacementlen;	/* length of new instruction, <= instrlen */
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
 };
 
 extern void alternative_instructions(void);
@@ -83,7 +80,6 @@
 									\
       "661:\n\t" oldinstr "\n662:\n"					\
       ".section .altinstructions,\"a\"\n"				\
-      _ASM_ALIGN "\n"							\
       "	 .long 661b - .\n"			/* label           */	\
       "	 .long 663f - .\n"			/* new instruction */	\
       "	 .word " __stringify(feature) "\n"	/* feature bit     */	\
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 4258aac..88b23a4 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -332,7 +332,6 @@
 		asm goto("1: jmp %l[t_no]\n"
 			 "2:\n"
 			 ".section .altinstructions,\"a\"\n"
-			 _ASM_ALIGN "\n"
 			 " .long 1b - .\n"
 			 " .long 0\n"		/* no replacement */
 			 " .word %P0\n"		/* feature bit */
@@ -350,7 +349,6 @@
 		asm volatile("1: movb $0,%0\n"
 			     "2:\n"
 			     ".section .altinstructions,\"a\"\n"
-			     _ASM_ALIGN "\n"
 			     " .long 1b - .\n"
 			     " .long 3f - .\n"
 			     " .word %P1\n"		/* feature bit */
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 3f2ad26..ccdbc16 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -42,8 +42,11 @@
 {
 	int real_seconds, real_minutes, cmos_minutes;
 	unsigned char save_control, save_freq_select;
+	unsigned long flags;
 	int retval = 0;
 
+	spin_lock_irqsave(&rtc_lock, flags);
+
 	 /* tell the clock it's being set */
 	save_control = CMOS_READ(RTC_CONTROL);
 	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
@@ -93,12 +96,17 @@
 	CMOS_WRITE(save_control, RTC_CONTROL);
 	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return retval;
 }
 
 unsigned long mach_get_cmos_time(void)
 {
 	unsigned int status, year, mon, day, hour, min, sec, century = 0;
+	unsigned long flags;
+
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	/*
 	 * If UIP is clear, then we have >= 244 microseconds before
@@ -125,6 +133,8 @@
 	status = CMOS_READ(RTC_CONTROL);
 	WARN_ON_ONCE(RTC_ALWAYS_BCD && (status & RTC_DM_BINARY));
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	if (RTC_ALWAYS_BCD || !(status & RTC_DM_BINARY)) {
 		sec = bcd2bin(sec);
 		min = bcd2bin(min);
@@ -169,24 +179,15 @@
 
 int update_persistent_clock(struct timespec now)
 {
-	unsigned long flags;
-	int retval;
-
-	spin_lock_irqsave(&rtc_lock, flags);
-	retval = x86_platform.set_wallclock(now.tv_sec);
-	spin_unlock_irqrestore(&rtc_lock, flags);
-
-	return retval;
+	return x86_platform.set_wallclock(now.tv_sec);
 }
 
 /* not static: needed by APM */
 void read_persistent_clock(struct timespec *ts)
 {
-	unsigned long retval, flags;
+	unsigned long retval;
 
-	spin_lock_irqsave(&rtc_lock, flags);
 	retval = x86_platform.get_wallclock();
-	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	ts->tv_sec = retval;
 	ts->tv_nsec = 0;
diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c
index 6f08bc9..8b4cc5f 100644
--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3603,7 +3603,7 @@
 		break;
 	case Src2CL:
 		ctxt->src2.bytes = 1;
-		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8;
+		ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff;
 		break;
 	case Src2ImmByte:
 		rc = decode_imm(ctxt, &ctxt->src2, 1, true);
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 1c5b693..8e8da79 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -400,7 +400,8 @@
 
 	/* xchg acts as a barrier before the setting of the high bits */
 	orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low);
-	orig.spte_high = ssptep->spte_high = sspte.spte_high;
+	orig.spte_high = ssptep->spte_high;
+	ssptep->spte_high = sspte.spte_high;
 	count_spte_clear(sptep, spte);
 
 	return orig.spte;
diff --git a/arch/x86/platform/mrst/vrtc.c b/arch/x86/platform/mrst/vrtc.c
index 73d70d6..6d5dbcd 100644
--- a/arch/x86/platform/mrst/vrtc.c
+++ b/arch/x86/platform/mrst/vrtc.c
@@ -58,8 +58,11 @@
 unsigned long vrtc_get_time(void)
 {
 	u8 sec, min, hour, mday, mon;
+	unsigned long flags;
 	u32 year;
 
+	spin_lock_irqsave(&rtc_lock, flags);
+
 	while ((vrtc_cmos_read(RTC_FREQ_SELECT) & RTC_UIP))
 		cpu_relax();
 
@@ -70,6 +73,8 @@
 	mon = vrtc_cmos_read(RTC_MONTH);
 	year = vrtc_cmos_read(RTC_YEAR);
 
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	/* vRTC YEAR reg contains the offset to 1960 */
 	year += 1960;
 
@@ -83,8 +88,10 @@
 int vrtc_set_mmss(unsigned long nowtime)
 {
 	int real_sec, real_min;
+	unsigned long flags;
 	int vrtc_min;
 
+	spin_lock_irqsave(&rtc_lock, flags);
 	vrtc_min = vrtc_cmos_read(RTC_MINUTES);
 
 	real_sec = nowtime % 60;
@@ -95,6 +102,8 @@
 
 	vrtc_cmos_write(real_sec, RTC_SECONDS);
 	vrtc_cmos_write(real_min, RTC_MINUTES);
+	spin_unlock_irqrestore(&rtc_lock, flags);
+
 	return 0;
 }
 
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 20a6142..3dd53f9 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -1721,10 +1721,8 @@
 		machine_to_phys_nr = MACH2PHYS_NR_ENTRIES;
 	}
 #ifdef CONFIG_X86_32
-	if ((machine_to_phys_mapping + machine_to_phys_nr)
-	    < machine_to_phys_mapping)
-		machine_to_phys_nr = (unsigned long *)NULL
-				     - machine_to_phys_mapping;
+	WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1))
+		< machine_to_phys_mapping);
 #endif
 }
 
diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c
index c3b8d44..46d6d21 100644
--- a/arch/x86/xen/setup.c
+++ b/arch/x86/xen/setup.c
@@ -306,10 +306,12 @@
 	sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map);
 
 	extra_limit = xen_get_max_pages();
-	if (extra_limit >= max_pfn)
-		extra_pages = extra_limit - max_pfn;
-	else
-		extra_pages = 0;
+	if (max_pfn + extra_pages > extra_limit) {
+		if (extra_limit > max_pfn)
+			extra_pages = extra_limit - max_pfn;
+		else
+			extra_pages = 0;
+	}
 
 	extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820);
 
diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c
index d4fc6d4..041d4fe 100644
--- a/arch/x86/xen/smp.c
+++ b/arch/x86/xen/smp.c
@@ -532,7 +532,6 @@
 	WARN_ON(xen_smp_intr_init(0));
 
 	xen_init_lock_cpu(0);
-	xen_init_spinlocks();
 }
 
 static int __cpuinit xen_hvm_cpu_up(unsigned int cpu)
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index 5158c50..163b467 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -168,9 +168,10 @@
         struct pvclock_vcpu_time_info *src;
 	cycle_t ret;
 
-	src = &get_cpu_var(xen_vcpu)->time;
+	preempt_disable_notrace();
+	src = &__get_cpu_var(xen_vcpu)->time;
 	ret = pvclock_clocksource_read(src);
-	put_cpu_var(xen_vcpu);
+	preempt_enable_notrace();
 	return ret;
 }
 
diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c
index bcaf16e..b596e54 100644
--- a/block/blk-cgroup.c
+++ b/block/blk-cgroup.c
@@ -785,10 +785,10 @@
 {
 	char *s[4], *p, *major_s = NULL, *minor_s = NULL;
 	int ret;
-	unsigned long major, minor, temp;
+	unsigned long major, minor;
 	int i = 0;
 	dev_t dev;
-	u64 bps, iops;
+	u64 temp;
 
 	memset(s, 0, sizeof(s));
 
@@ -826,20 +826,23 @@
 
 	dev = MKDEV(major, minor);
 
-	ret = blkio_check_dev_num(dev);
+	ret = strict_strtoull(s[1], 10, &temp);
 	if (ret)
-		return ret;
+		return -EINVAL;
+
+	/* For rule removal, do not check for device presence. */
+	if (temp) {
+		ret = blkio_check_dev_num(dev);
+		if (ret)
+			return ret;
+	}
 
 	newpn->dev = dev;
 
-	if (s[1] == NULL)
-		return -EINVAL;
-
 	switch (plid) {
 	case BLKIO_POLICY_PROP:
-		ret = strict_strtoul(s[1], 10, &temp);
-		if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) ||
-			temp > BLKIO_WEIGHT_MAX)
+		if ((temp < BLKIO_WEIGHT_MIN && temp > 0) ||
+		     temp > BLKIO_WEIGHT_MAX)
 			return -EINVAL;
 
 		newpn->plid = plid;
@@ -850,26 +853,18 @@
 		switch(fileid) {
 		case BLKIO_THROTL_read_bps_device:
 		case BLKIO_THROTL_write_bps_device:
-			ret = strict_strtoull(s[1], 10, &bps);
-			if (ret)
-				return -EINVAL;
-
 			newpn->plid = plid;
 			newpn->fileid = fileid;
-			newpn->val.bps = bps;
+			newpn->val.bps = temp;
 			break;
 		case BLKIO_THROTL_read_iops_device:
 		case BLKIO_THROTL_write_iops_device:
-			ret = strict_strtoull(s[1], 10, &iops);
-			if (ret)
-				return -EINVAL;
-
-			if (iops > THROTL_IOPS_MAX)
+			if (temp > THROTL_IOPS_MAX)
 				return -EINVAL;
 
 			newpn->plid = plid;
 			newpn->fileid = fileid;
-			newpn->val.iops = (unsigned int)iops;
+			newpn->val.iops = (unsigned int)temp;
 			break;
 		}
 		break;
diff --git a/block/blk-core.c b/block/blk-core.c
index 90e1ffd..d34433a 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -348,9 +348,10 @@
 EXPORT_SYMBOL(blk_put_queue);
 
 /*
- * Note: If a driver supplied the queue lock, it should not zap that lock
- * unexpectedly as some queue cleanup components like elevator_exit() and
- * blk_throtl_exit() need queue lock.
+ * Note: If a driver supplied the queue lock, it is disconnected
+ * by this function. The actual state of the lock doesn't matter
+ * here as the request_queue isn't accessible after this point
+ * (QUEUE_FLAG_DEAD is set) and no other requests will be queued.
  */
 void blk_cleanup_queue(struct request_queue *q)
 {
@@ -367,10 +368,8 @@
 	queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
 	mutex_unlock(&q->sysfs_lock);
 
-	if (q->elevator)
-		elevator_exit(q->elevator);
-
-	blk_throtl_exit(q);
+	if (q->queue_lock != &q->__queue_lock)
+		q->queue_lock = &q->__queue_lock;
 
 	blk_put_queue(q);
 }
@@ -1167,7 +1166,7 @@
  * true if merge was successful, otherwise false.
  */
 static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
-			       struct bio *bio)
+			       struct bio *bio, unsigned int *request_count)
 {
 	struct blk_plug *plug;
 	struct request *rq;
@@ -1176,10 +1175,13 @@
 	plug = tsk->plug;
 	if (!plug)
 		goto out;
+	*request_count = 0;
 
 	list_for_each_entry_reverse(rq, &plug->list, queuelist) {
 		int el_ret;
 
+		(*request_count)++;
+
 		if (rq->q != q)
 			continue;
 
@@ -1219,6 +1221,7 @@
 	struct blk_plug *plug;
 	int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
 	struct request *req;
+	unsigned int request_count = 0;
 
 	/*
 	 * low level driver can indicate that it wants pages above a
@@ -1237,7 +1240,7 @@
 	 * Check if we can merge with the plugged list before grabbing
 	 * any locks.
 	 */
-	if (attempt_plug_merge(current, q, bio))
+	if (attempt_plug_merge(current, q, bio, &request_count))
 		goto out;
 
 	spin_lock_irq(q->queue_lock);
@@ -1302,11 +1305,10 @@
 			if (__rq->q != q)
 				plug->should_sort = 1;
 		}
-		list_add_tail(&req->queuelist, &plug->list);
-		plug->count++;
-		drive_stat_acct(req, 1);
-		if (plug->count >= BLK_MAX_REQUEST_COUNT)
+		if (request_count >= BLK_MAX_REQUEST_COUNT)
 			blk_flush_plug_list(plug, false);
+		list_add_tail(&req->queuelist, &plug->list);
+		drive_stat_acct(req, 1);
 	} else {
 		spin_lock_irq(q->queue_lock);
 		add_acct_request(q, req, where);
@@ -2634,7 +2636,6 @@
 	INIT_LIST_HEAD(&plug->list);
 	INIT_LIST_HEAD(&plug->cb_list);
 	plug->should_sort = 0;
-	plug->count = 0;
 
 	/*
 	 * If this is a nested plug, don't actually assign it. It will be
@@ -2718,7 +2719,6 @@
 		return;
 
 	list_splice_init(&plug->list, &list);
-	plug->count = 0;
 
 	if (plug->should_sort) {
 		list_sort(NULL, &list, plug_rq_cmp);
diff --git a/block/blk-softirq.c b/block/blk-softirq.c
index 58340d0..1366a89 100644
--- a/block/blk-softirq.c
+++ b/block/blk-softirq.c
@@ -115,7 +115,7 @@
 	/*
 	 * Select completion CPU
 	 */
-	if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) {
+	if (req->cpu != -1) {
 		ccpu = req->cpu;
 		if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) {
 			ccpu = blk_cpu_to_group(ccpu);
diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c
index 0ee17b5..60fda88 100644
--- a/block/blk-sysfs.c
+++ b/block/blk-sysfs.c
@@ -258,11 +258,13 @@
 
 	ret = queue_var_store(&val, page, count);
 	spin_lock_irq(q->queue_lock);
-	if (val) {
+	if (val == 2) {
 		queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
-		if (val == 2)
-			queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
-	} else {
+		queue_flag_set(QUEUE_FLAG_SAME_FORCE, q);
+	} else if (val == 1) {
+		queue_flag_set(QUEUE_FLAG_SAME_COMP, q);
+		queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
+	} else if (val == 0) {
 		queue_flag_clear(QUEUE_FLAG_SAME_COMP, q);
 		queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q);
 	}
@@ -477,6 +479,11 @@
 
 	blk_sync_queue(q);
 
+	if (q->elevator)
+		elevator_exit(q->elevator);
+
+	blk_throtl_exit(q);
+
 	if (rl->rq_pool)
 		mempool_destroy(rl->rq_pool);
 
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index a33bd43..16ace89 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -130,8 +130,8 @@
 	unsigned long slice_end;
 	long slice_resid;
 
-	/* pending metadata requests */
-	int meta_pending;
+	/* pending priority requests */
+	int prio_pending;
 	/* number of requests that are on the dispatch list or inside driver */
 	int dispatched;
 
@@ -684,8 +684,8 @@
 	if (rq_is_sync(rq1) != rq_is_sync(rq2))
 		return rq_is_sync(rq1) ? rq1 : rq2;
 
-	if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META)
-		return rq1->cmd_flags & REQ_META ? rq1 : rq2;
+	if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO)
+		return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2;
 
 	s1 = blk_rq_pos(rq1);
 	s2 = blk_rq_pos(rq2);
@@ -1612,9 +1612,9 @@
 	cfqq->cfqd->rq_queued--;
 	cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg,
 					rq_data_dir(rq), rq_is_sync(rq));
-	if (rq->cmd_flags & REQ_META) {
-		WARN_ON(!cfqq->meta_pending);
-		cfqq->meta_pending--;
+	if (rq->cmd_flags & REQ_PRIO) {
+		WARN_ON(!cfqq->prio_pending);
+		cfqq->prio_pending--;
 	}
 }
 
@@ -3372,7 +3372,7 @@
 	 * So both queues are sync. Let the new request get disk time if
 	 * it's a metadata request and the current queue is doing regular IO.
 	 */
-	if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending)
+	if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending)
 		return true;
 
 	/*
@@ -3439,8 +3439,8 @@
 	struct cfq_io_context *cic = RQ_CIC(rq);
 
 	cfqd->rq_queued++;
-	if (rq->cmd_flags & REQ_META)
-		cfqq->meta_pending++;
+	if (rq->cmd_flags & REQ_PRIO)
+		cfqq->prio_pending++;
 
 	cfq_update_io_thinktime(cfqd, cfqq, cic);
 	cfq_update_io_seektime(cfqd, cfqq, rq);
diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h
index bc533dd..f895a24 100644
--- a/drivers/acpi/acpica/acconfig.h
+++ b/drivers/acpi/acpica/acconfig.h
@@ -121,7 +121,7 @@
 
 /* Maximum sleep allowed via Sleep() operator */
 
-#define ACPI_MAX_SLEEP                  20000	/* Two seconds */
+#define ACPI_MAX_SLEEP                  2000	/* Two seconds */
 
 /******************************************************************************
  *
diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig
index c34aa51..e3f4787 100644
--- a/drivers/acpi/apei/Kconfig
+++ b/drivers/acpi/apei/Kconfig
@@ -13,6 +13,7 @@
 	bool "APEI Generic Hardware Error Source"
 	depends on ACPI_APEI && X86
 	select ACPI_HED
+	select IRQ_WORK
 	select LLIST
 	select GENERIC_ALLOCATOR
 	help
diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c
index 8041248..6154036 100644
--- a/drivers/acpi/apei/apei-base.c
+++ b/drivers/acpi/apei/apei-base.c
@@ -618,7 +618,7 @@
 	};
 
 	capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
-	capbuf[OSC_SUPPORT_TYPE] = 0;
+	capbuf[OSC_SUPPORT_TYPE] = 1;
 	capbuf[OSC_CONTROL_TYPE] = 0;
 
 	if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle))
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 960c725..3f4c261 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -30,7 +30,7 @@
 
 #include <mach/at91sam9_smc.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #define DRV_NAME		"pata_at91"
 #define DRV_VERSION		"0.3"
diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c
index 2c18d58..b97294e 100644
--- a/drivers/base/power/clock_ops.c
+++ b/drivers/base/power/clock_ops.c
@@ -42,6 +42,22 @@
 }
 
 /**
+ * pm_clk_acquire - Acquire a device clock.
+ * @dev: Device whose clock is to be acquired.
+ * @ce: PM clock entry corresponding to the clock.
+ */
+static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce)
+{
+	ce->clk = clk_get(dev, ce->con_id);
+	if (IS_ERR(ce->clk)) {
+		ce->status = PCE_STATUS_ERROR;
+	} else {
+		ce->status = PCE_STATUS_ACQUIRED;
+		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
+	}
+}
+
+/**
  * pm_clk_add - Start using a device clock for power management.
  * @dev: Device whose clock is going to be used for power management.
  * @con_id: Connection ID of the clock.
@@ -73,6 +89,8 @@
 		}
 	}
 
+	pm_clk_acquire(dev, ce);
+
 	spin_lock_irq(&pcd->lock);
 	list_add_tail(&ce->node, &pcd->clock_list);
 	spin_unlock_irq(&pcd->lock);
@@ -82,17 +100,12 @@
 /**
  * __pm_clk_remove - Destroy PM clock entry.
  * @ce: PM clock entry to destroy.
- *
- * This routine must be called under the spinlock protecting the PM list of
- * clocks corresponding the the @ce's device.
  */
 static void __pm_clk_remove(struct pm_clock_entry *ce)
 {
 	if (!ce)
 		return;
 
-	list_del(&ce->node);
-
 	if (ce->status < PCE_STATUS_ERROR) {
 		if (ce->status == PCE_STATUS_ENABLED)
 			clk_disable(ce->clk);
@@ -126,18 +139,22 @@
 	spin_lock_irq(&pcd->lock);
 
 	list_for_each_entry(ce, &pcd->clock_list, node) {
-		if (!con_id && !ce->con_id) {
-			__pm_clk_remove(ce);
-			break;
-		} else if (!con_id || !ce->con_id) {
+		if (!con_id && !ce->con_id)
+			goto remove;
+		else if (!con_id || !ce->con_id)
 			continue;
-		} else if (!strcmp(con_id, ce->con_id)) {
-			__pm_clk_remove(ce);
-			break;
-		}
+		else if (!strcmp(con_id, ce->con_id))
+			goto remove;
 	}
 
 	spin_unlock_irq(&pcd->lock);
+	return;
+
+ remove:
+	list_del(&ce->node);
+	spin_unlock_irq(&pcd->lock);
+
+	__pm_clk_remove(ce);
 }
 
 /**
@@ -175,20 +192,27 @@
 {
 	struct pm_clk_data *pcd = __to_pcd(dev);
 	struct pm_clock_entry *ce, *c;
+	struct list_head list;
 
 	if (!pcd)
 		return;
 
 	dev->power.subsys_data = NULL;
+	INIT_LIST_HEAD(&list);
 
 	spin_lock_irq(&pcd->lock);
 
 	list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node)
-		__pm_clk_remove(ce);
+		list_move(&ce->node, &list);
 
 	spin_unlock_irq(&pcd->lock);
 
 	kfree(pcd);
+
+	list_for_each_entry_safe_reverse(ce, c, &list, node) {
+		list_del(&ce->node);
+		__pm_clk_remove(ce);
+	}
 }
 
 #endif /* CONFIG_PM */
@@ -196,23 +220,6 @@
 #ifdef CONFIG_PM_RUNTIME
 
 /**
- * pm_clk_acquire - Acquire a device clock.
- * @dev: Device whose clock is to be acquired.
- * @con_id: Connection ID of the clock.
- */
-static void pm_clk_acquire(struct device *dev,
-				    struct pm_clock_entry *ce)
-{
-	ce->clk = clk_get(dev, ce->con_id);
-	if (IS_ERR(ce->clk)) {
-		ce->status = PCE_STATUS_ERROR;
-	} else {
-		ce->status = PCE_STATUS_ACQUIRED;
-		dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id);
-	}
-}
-
-/**
  * pm_clk_suspend - Disable clocks in a device's PM clock list.
  * @dev: Device to disable the clocks for.
  */
@@ -230,9 +237,6 @@
 	spin_lock_irqsave(&pcd->lock, flags);
 
 	list_for_each_entry_reverse(ce, &pcd->clock_list, node) {
-		if (ce->status == PCE_STATUS_NONE)
-			pm_clk_acquire(dev, ce);
-
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_disable(ce->clk);
 			ce->status = PCE_STATUS_ACQUIRED;
@@ -262,9 +266,6 @@
 	spin_lock_irqsave(&pcd->lock, flags);
 
 	list_for_each_entry(ce, &pcd->clock_list, node) {
-		if (ce->status == PCE_STATUS_NONE)
-			pm_clk_acquire(dev, ce);
-
 		if (ce->status < PCE_STATUS_ERROR) {
 			clk_enable(ce->clk);
 			ce->status = PCE_STATUS_ENABLED;
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 98de8f4..9955a53 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -4250,7 +4250,7 @@
 	use_virtual_dma = can_use_virtual_dma & 1;
 	fdc_state[0].address = FDC1;
 	if (fdc_state[0].address == -1) {
-		del_timer(&fd_timeout);
+		del_timer_sync(&fd_timeout);
 		err = -ENODEV;
 		goto out_unreg_region;
 	}
@@ -4261,7 +4261,7 @@
 	fdc = 0;		/* reset fdc in case of unexpected interrupt */
 	err = floppy_grab_irq_and_dma();
 	if (err) {
-		del_timer(&fd_timeout);
+		del_timer_sync(&fd_timeout);
 		err = -EBUSY;
 		goto out_unreg_region;
 	}
@@ -4318,7 +4318,7 @@
 		user_reset_fdc(-1, FD_RESET_ALWAYS, false);
 	}
 	fdc = 0;
-	del_timer(&fd_timeout);
+	del_timer_sync(&fd_timeout);
 	current_drive = 0;
 	initialized = true;
 	if (have_no_fdc) {
@@ -4368,7 +4368,7 @@
 	unregister_blkdev(FLOPPY_MAJOR, "fd");
 out_put_disk:
 	while (dr--) {
-		del_timer(&motor_off_timer[dr]);
+		del_timer_sync(&motor_off_timer[dr]);
 		if (disks[dr]->queue)
 			blk_cleanup_queue(disks[dr]->queue);
 		put_disk(disks[dr]);
diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h
index 9e40b28..00c57c9 100644
--- a/drivers/block/xen-blkback/common.h
+++ b/drivers/block/xen-blkback/common.h
@@ -46,7 +46,7 @@
 
 #define DRV_PFX "xen-blkback:"
 #define DPRINTK(fmt, args...)				\
-	pr_debug(DRV_PFX "(%s:%d) " fmt ".\n",	\
+	pr_debug(DRV_PFX "(%s:%d) " fmt ".\n",		\
 		 __func__, __LINE__, ##args)
 
 
diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c
index 3f129b4..5fd2010 100644
--- a/drivers/block/xen-blkback/xenbus.c
+++ b/drivers/block/xen-blkback/xenbus.c
@@ -590,7 +590,7 @@
 
 		/*
 		 * Enforce precondition before potential leak point.
-		 * blkif_disconnect() is idempotent.
+		 * xen_blkif_disconnect() is idempotent.
 		 */
 		xen_blkif_disconnect(be->blkif);
 
@@ -601,17 +601,17 @@
 		break;
 
 	case XenbusStateClosing:
-		xen_blkif_disconnect(be->blkif);
 		xenbus_switch_state(dev, XenbusStateClosing);
 		break;
 
 	case XenbusStateClosed:
+		xen_blkif_disconnect(be->blkif);
 		xenbus_switch_state(dev, XenbusStateClosed);
 		if (xenbus_dev_is_online(dev))
 			break;
 		/* fall through if not online */
 	case XenbusStateUnknown:
-		/* implies blkif_disconnect() via blkback_remove() */
+		/* implies xen_blkif_disconnect() via xen_blkbk_remove() */
 		device_unregister(&dev->dev);
 		break;
 
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 3ef4760..9cbac6b 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -72,9 +72,15 @@
 	/* Apple MacBookAir3,1, MacBookAir3,2 */
 	{ USB_DEVICE(0x05ac, 0x821b) },
 
+	/* Apple MacBookAir4,1 */
+	{ USB_DEVICE(0x05ac, 0x821f) },
+
 	/* Apple MacBookPro8,2 */
 	{ USB_DEVICE(0x05ac, 0x821a) },
 
+	/* Apple MacMini5,1 */
+	{ USB_DEVICE(0x05ac, 0x8281) },
+
 	/* AVM BlueFRITZ! USB v2.0 */
 	{ USB_DEVICE(0x057c, 0x3800) },
 
diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c
index 65d27af..04d353f 100644
--- a/drivers/bluetooth/btwilink.c
+++ b/drivers/bluetooth/btwilink.c
@@ -125,6 +125,13 @@
 /* protocol structure registered with shared transport */
 static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = {
 	{
+		.chnl_id = HCI_EVENT_PKT, /* HCI Events */
+		.hdr_len = sizeof(struct hci_event_hdr),
+		.offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
+		.len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
+		.reserve = 8,
+	},
+	{
 		.chnl_id = HCI_ACLDATA_PKT, /* ACL */
 		.hdr_len = sizeof(struct hci_acl_hdr),
 		.offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen),
@@ -138,13 +145,6 @@
 		.len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */
 		.reserve = 8,
 	},
-	{
-		.chnl_id = HCI_EVENT_PKT, /* HCI Events */
-		.hdr_len = sizeof(struct hci_event_hdr),
-		.offset_len_in_hdr = offsetof(struct hci_event_hdr, plen),
-		.len_size = 1, /* sizeof(plen) in struct hci_event_hdr */
-		.reserve = 8,
-	},
 };
 
 /* Called from HCI core to initialize the device */
@@ -240,7 +240,7 @@
 	if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags))
 		return 0;
 
-	for (i = 0; i < MAX_BT_CHNL_IDS; i++) {
+	for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) {
 		err = st_unregister(&ti_st_proto[i]);
 		if (err)
 			BT_ERR("st_unregister(%d) failed with error %d",
diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig
index f6595ab..fa567f1 100644
--- a/drivers/char/tpm/Kconfig
+++ b/drivers/char/tpm/Kconfig
@@ -43,6 +43,7 @@
 
 config TCG_ATMEL
 	tristate "Atmel TPM Interface"
+	depends on PPC64 || HAS_IOPORT
 	---help---
 	  If you have a TPM security chip from Atmel say Yes and it 
 	  will be accessible from within Linux.  To compile this driver 
diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c
index caf8012..9ca5c02 100644
--- a/drivers/char/tpm/tpm.c
+++ b/drivers/char/tpm/tpm.c
@@ -383,6 +383,9 @@
 	u32 count, ordinal;
 	unsigned long stop;
 
+	if (bufsiz > TPM_BUFSIZE)
+		bufsiz = TPM_BUFSIZE;
+
 	count = be32_to_cpu(*((__be32 *) (buf + 2)));
 	ordinal = be32_to_cpu(*((__be32 *) (buf + 6)));
 	if (count == 0)
@@ -1102,6 +1105,7 @@
 {
 	struct tpm_chip *chip = file->private_data;
 	ssize_t ret_size;
+	int rc;
 
 	del_singleshot_timer_sync(&chip->user_read_timer);
 	flush_work_sync(&chip->work);
@@ -1112,8 +1116,11 @@
 			ret_size = size;
 
 		mutex_lock(&chip->buffer_mutex);
-		if (copy_to_user(buf, chip->data_buffer, ret_size))
+		rc = copy_to_user(buf, chip->data_buffer, ret_size);
+		memset(chip->data_buffer, 0, ret_size);
+		if (rc)
 			ret_size = -EFAULT;
+
 		mutex_unlock(&chip->buffer_mutex);
 	}
 
diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c
index 82facc9..4d24648 100644
--- a/drivers/char/tpm/tpm_nsc.c
+++ b/drivers/char/tpm/tpm_nsc.c
@@ -396,8 +396,6 @@
 	if (pdev) {
 		tpm_nsc_remove(&pdev->dev);
 		platform_device_unregister(pdev);
-		kfree(pdev);
-		pdev = NULL;
 	}
 
 	platform_driver_unregister(&nsc_drv);
diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c
index 7b0603e..cdc02ac 100644
--- a/drivers/cpufreq/pcc-cpufreq.c
+++ b/drivers/cpufreq/pcc-cpufreq.c
@@ -261,6 +261,9 @@
 	pr = per_cpu(processors, cpu);
 	pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu);
 
+	if (!pr)
+		return -ENODEV;
+
 	status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c
index 57cd3a4..fd7170a 100644
--- a/drivers/firewire/ohci.c
+++ b/drivers/firewire/ohci.c
@@ -290,6 +290,9 @@
 	{PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
 		QUIRK_CYCLE_TIMER},
 
+	{PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID,
+		QUIRK_NO_MSI},
+
 	{PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
 		QUIRK_CYCLE_TIMER},
 
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d539efd..4caa3d3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -178,6 +178,15 @@
 	  The Intel Tunnel Creek processor has 5 GPIOs powered by the
 	  core power rail and 9 from suspend power supply.
 
+config GPIO_U300
+	bool "ST-Ericsson U300 COH 901 335/571 GPIO"
+	depends on GPIOLIB && ARCH_U300
+	help
+	  Say yes here to support GPIO interface on ST-Ericsson U300.
+	  The names of the two IP block variants supported are
+	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
+	  ports of 8 GPIO pins each.
+
 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
 	depends on MFD_SUPPORT && PCI
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 9588948..19c5d27 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -14,11 +14,14 @@
 obj-$(CONFIG_GPIO_BT8XX)	+= gpio-bt8xx.o
 obj-$(CONFIG_GPIO_CS5535)	+= gpio-cs5535.o
 obj-$(CONFIG_GPIO_DA9052)	+= gpio-da9052.o
+obj-$(CONFIG_ARCH_DAVINCI)	+= gpio-davinci.o
 obj-$(CONFIG_GPIO_EP93XX)	+= gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXYNOS4)	+= gpio-exynos4.o
 obj-$(CONFIG_GPIO_IT8761E)	+= gpio-it8761e.o
 obj-$(CONFIG_GPIO_JANZ_TTL)	+= gpio-janz-ttl.o
+obj-$(CONFIG_MACH_KS8695)	+= gpio-ks8695.o
 obj-$(CONFIG_GPIO_LANGWELL)	+= gpio-langwell.o
+obj-$(CONFIG_ARCH_LPC32XX)	+= gpio-lpc32xx.o
 obj-$(CONFIG_GPIO_MAX730X)	+= gpio-max730x.o
 obj-$(CONFIG_GPIO_MAX7300)	+= gpio-max7300.o
 obj-$(CONFIG_GPIO_MAX7301)	+= gpio-max7301.o
@@ -37,18 +40,20 @@
 obj-$(CONFIG_GPIO_PCF857X)	+= gpio-pcf857x.o
 obj-$(CONFIG_GPIO_PCH)		+= gpio-pch.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
+obj-$(CONFIG_PLAT_PXA)		+= gpio-pxa.o
 obj-$(CONFIG_GPIO_RDC321X)	+= gpio-rdc321x.o
 
 obj-$(CONFIG_GPIO_PLAT_SAMSUNG)	+= gpio-plat-samsung.o
 obj-$(CONFIG_GPIO_S5PC100)	+= gpio-s5pc100.o
 obj-$(CONFIG_GPIO_S5PV210)	+= gpio-s5pv210.o
-
+obj-$(CONFIG_ARCH_SA1100)	+= gpio-sa1100.o
 obj-$(CONFIG_GPIO_SCH)		+= gpio-sch.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_SX150X)	+= gpio-sx150x.o
 obj-$(CONFIG_GPIO_TC3589X)	+= gpio-tc3589x.o
 obj-$(CONFIG_ARCH_TEGRA)	+= gpio-tegra.o
 obj-$(CONFIG_GPIO_TIMBERDALE)	+= gpio-timberdale.o
+obj-$(CONFIG_ARCH_DAVINCI_TNETV107X) += gpio-tnetv107x.o
 obj-$(CONFIG_GPIO_TPS65910)	+= gpio-tps65910.o
 obj-$(CONFIG_GPIO_TPS65912)	+= gpio-tps65912.o
 obj-$(CONFIG_GPIO_TWL4030)	+= gpio-twl4030.o
diff --git a/arch/arm/mach-davinci/gpio.c b/drivers/gpio/gpio-davinci.c
similarity index 97%
rename from arch/arm/mach-davinci/gpio.c
rename to drivers/gpio/gpio-davinci.c
index cafbe13..df0d595 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -9,15 +9,13 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-
+#include <linux/gpio.h>
 #include <linux/errno.h>
 #include <linux/kernel.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/gpio.h>
-
 #include <asm/mach/irq.h>
 
 struct davinci_gpio_regs {
@@ -232,9 +230,6 @@
 
 static int gpio_irq_type(struct irq_data *d, unsigned trigger)
 {
-	struct davinci_gpio_regs __iomem *g = irq2regs(d->irq);
-	u32 mask = (u32) irq_data_get_irq_handler_data(d);
-
 	if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING))
 		return -EINVAL;
 
diff --git a/drivers/gpio/gpio-ep93xx.c b/drivers/gpio/gpio-ep93xx.c
index 72fb9c6..7aafbb4 100644
--- a/drivers/gpio/gpio-ep93xx.c
+++ b/drivers/gpio/gpio-ep93xx.c
@@ -23,6 +23,9 @@
 #include <linux/basic_mmio_gpio.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-ep93xx.h>
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 struct ep93xx_gpio {
 	void __iomem		*mmio_base;
@@ -307,6 +310,21 @@
 	return 0;
 }
 
+/*
+ * Map GPIO A0..A7  (0..7)  to irq 64..71,
+ *          B0..B7  (7..15) to irq 72..79, and
+ *          F0..F7 (16..24) to irq 80..87.
+ */
+static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	int gpio = chip->base + offset;
+
+	if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
+		return -EINVAL;
+
+	return 64 + gpio;
+}
+
 static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
 	void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
 {
@@ -321,8 +339,10 @@
 	bgc->gc.label = bank->label;
 	bgc->gc.base = bank->base;
 
-	if (bank->has_debounce)
+	if (bank->has_debounce) {
 		bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
+		bgc->gc.to_irq = ep93xx_gpio_to_irq;
+	}
 
 	return gpiochip_add(&bgc->gc);
 }
diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c
index 231714d..4e24436 100644
--- a/drivers/gpio/gpio-generic.c
+++ b/drivers/gpio/gpio-generic.c
@@ -351,7 +351,7 @@
 	return 0;
 }
 
-int __devexit bgpio_remove(struct bgpio_chip *bgc)
+int bgpio_remove(struct bgpio_chip *bgc)
 {
 	int err = gpiochip_remove(&bgc->gc);
 
@@ -361,15 +361,10 @@
 }
 EXPORT_SYMBOL_GPL(bgpio_remove);
 
-int __devinit bgpio_init(struct bgpio_chip *bgc,
-			 struct device *dev,
-			 unsigned long sz,
-			 void __iomem *dat,
-			 void __iomem *set,
-			 void __iomem *clr,
-			 void __iomem *dirout,
-			 void __iomem *dirin,
-			 bool big_endian)
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+	       unsigned long sz, void __iomem *dat, void __iomem *set,
+	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+	       bool big_endian)
 {
 	int ret;
 
diff --git a/arch/arm/mach-ks8695/gpio.c b/drivers/gpio/gpio-ks8695.c
similarity index 98%
rename from arch/arm/mach-ks8695/gpio.c
rename to drivers/gpio/gpio-ks8695.c
index 31e4565..a3ac66e 100644
--- a/arch/arm/mach-ks8695/gpio.c
+++ b/drivers/gpio/gpio-ks8695.c
@@ -18,7 +18,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
-
+#include <linux/gpio.h>
 #include <linux/kernel.h>
 #include <linux/mm.h>
 #include <linux/init.h>
@@ -31,7 +31,7 @@
 #include <asm/mach/irq.h>
 
 #include <mach/regs-gpio.h>
-#include <mach/gpio.h>
+#include <mach/gpio-ks8695.h>
 
 /*
  * Configure a GPIO line for either GPIO function, or its internal
diff --git a/arch/arm/mach-lpc32xx/gpiolib.c b/drivers/gpio/gpio-lpc32xx.c
similarity index 98%
rename from arch/arm/mach-lpc32xx/gpiolib.c
rename to drivers/gpio/gpio-lpc32xx.c
index 69061ea..5b69480 100644
--- a/arch/arm/mach-lpc32xx/gpiolib.c
+++ b/drivers/gpio/gpio-lpc32xx.c
@@ -24,7 +24,7 @@
 
 #include <mach/hardware.h>
 #include <mach/platform.h>
-#include "common.h"
+#include <mach/gpio-lpc32xx.h>
 
 #define LPC32XX_GPIO_P3_INP_STATE		_GPREG(0x000)
 #define LPC32XX_GPIO_P3_OUTP_SET		_GPREG(0x004)
diff --git a/drivers/gpio/gpio-nomadik.c b/drivers/gpio/gpio-nomadik.c
index 2c212c7..740caed 100644
--- a/drivers/gpio/gpio-nomadik.c
+++ b/drivers/gpio/gpio-nomadik.c
@@ -27,8 +27,9 @@
 #include <asm/mach/irq.h>
 
 #include <plat/pincfg.h>
+#include <plat/gpio-nomadik.h>
 #include <mach/hardware.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 /*
  * The GPIO module in the Nomadik family of Systems-on-Chip is an
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 0599854..9c27244 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -25,7 +25,7 @@
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <asm/mach/irq.h>
 
 struct gpio_bank {
diff --git a/arch/arm/plat-pxa/gpio.c b/drivers/gpio/gpio-pxa.c
similarity index 98%
rename from arch/arm/plat-pxa/gpio.c
rename to drivers/gpio/gpio-pxa.c
index a11dc36..9052925 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/drivers/gpio/gpio-pxa.c
@@ -11,14 +11,14 @@
  *  it under the terms of the GNU General Public License version 2 as
  *  published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/syscore_ops.h>
 #include <linux/slab.h>
 
-#include <mach/gpio.h>
+#include <mach/gpio-pxa.h>
 
 int pxa_last_gpio;
 
diff --git a/arch/arm/mach-sa1100/gpio.c b/drivers/gpio/gpio-sa1100.c
similarity index 96%
rename from arch/arm/mach-sa1100/gpio.c
rename to drivers/gpio/gpio-sa1100.c
index 0d3829a..b6c1f6d 100644
--- a/arch/arm/mach-sa1100/gpio.c
+++ b/drivers/gpio/gpio-sa1100.c
@@ -7,13 +7,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-
+#include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/module.h>
 
-#include <asm/gpio.h>
 #include <mach/hardware.h>
-#include "generic.h"
 
 static int sa1100_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
diff --git a/drivers/gpio/gpio-tegra.c b/drivers/gpio/gpio-tegra.c
index 747eb40..6b65207 100644
--- a/drivers/gpio/gpio-tegra.c
+++ b/drivers/gpio/gpio-tegra.c
@@ -27,6 +27,7 @@
 
 #include <asm/mach/irq.h>
 
+#include <mach/gpio-tegra.h>
 #include <mach/iomap.h>
 #include <mach/suspend.h>
 
@@ -134,7 +135,10 @@
 	return 0;
 }
 
-
+static int tegra_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+	return TEGRA_GPIO_TO_IRQ(offset);
+}
 
 static struct gpio_chip tegra_gpio_chip = {
 	.label			= "tegra-gpio",
@@ -142,6 +146,7 @@
 	.get			= tegra_gpio_get,
 	.direction_output	= tegra_gpio_direction_output,
 	.set			= tegra_gpio_set,
+	.to_irq			= tegra_gpio_to_irq,
 	.base			= 0,
 	.ngpio			= TEGRA_NR_GPIOS,
 };
@@ -331,6 +336,7 @@
 static int __init tegra_gpio_init(void)
 {
 	struct tegra_gpio_bank *bank;
+	int gpio;
 	int i;
 	int j;
 
@@ -352,14 +358,17 @@
 
 	gpiochip_add(&tegra_gpio_chip);
 
-	for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) {
-		bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))];
+	for (gpio = 0; gpio < TEGRA_NR_GPIOS; gpio++) {
+		int irq = TEGRA_GPIO_TO_IRQ(gpio);
+		/* No validity check; all Tegra GPIOs are valid IRQs */
 
-		irq_set_lockdep_class(i, &gpio_lock_class);
-		irq_set_chip_data(i, bank);
-		irq_set_chip_and_handler(i, &tegra_gpio_irq_chip,
+		bank = &tegra_gpio_banks[GPIO_BANK(gpio)];
+
+		irq_set_lockdep_class(irq, &gpio_lock_class);
+		irq_set_chip_data(irq, bank);
+		irq_set_chip_and_handler(irq, &tegra_gpio_irq_chip,
 					 handle_simple_irq);
-		set_irq_flags(i, IRQF_VALID);
+		set_irq_flags(irq, IRQF_VALID);
 	}
 
 	for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) {
diff --git a/arch/arm/mach-davinci/gpio-tnetv107x.c b/drivers/gpio/gpio-tnetv107x.c
similarity index 100%
rename from arch/arm/mach-davinci/gpio-tnetv107x.c
rename to drivers/gpio/gpio-tnetv107x.c
diff --git a/drivers/gpio/gpio-u300.c b/drivers/gpio/gpio-u300.c
index 53e8255..4035778 100644
--- a/drivers/gpio/gpio-u300.c
+++ b/drivers/gpio/gpio-u300.c
@@ -1,18 +1,17 @@
 /*
  * U300 GPIO module.
  *
- * Copyright (C) 2007-2009 ST-Ericsson AB
+ * Copyright (C) 2007-2011 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * This can driver either of the two basic GPIO cores
  * available in the U300 platforms:
  * COH 901 335   - Used in DB3150 (U300 1.0) and DB3200 (U330 1.0)
  * COH 901 571/3 - Used in DB3210 (U365 2.0) and DB3350 (U335 1.0)
- * Notice that you also have inline macros in <asm-arch/gpio.h>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
  */
 #include <linux/module.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -21,677 +20,898 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <mach/gpio-u300.h>
 
-/* Reference to GPIO block clock */
-static struct clk *clk;
+/*
+ * Bias modes for U300 GPIOs
+ *
+ * GPIO_U300_CONFIG_BIAS_UNKNOWN: this bias mode is not known to us
+ * GPIO_U300_CONFIG_BIAS_FLOAT: no specific bias, the GPIO will float or state
+ *	is not controlled by software
+ * GPIO_U300_CONFIG_BIAS_PULL_UP: the GPIO will be pulled up (usually with high
+ *	impedance to VDD)
+ */
+#define GPIO_U300_CONFIG_BIAS_UNKNOWN	0x1000
+#define GPIO_U300_CONFIG_BIAS_FLOAT	0x1001
+#define GPIO_U300_CONFIG_BIAS_PULL_UP	0x1002
 
-/* Memory resource */
-static struct resource *memres;
-static void __iomem *virtbase;
-static struct device *gpiodev;
+/*
+ * Drive modes for U300 GPIOs (output)
+ *
+ * GPIO_U300_CONFIG_DRIVE_PUSH_PULL: the GPIO will be driven actively high and
+ *	low, this is the most typical case and is typically achieved with two
+ *	active transistors on the output
+ * GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN: the GPIO will be driven with open drain
+ *	(open collector) which means it is usually wired with other output
+ *	ports which are then pulled up with an external resistor
+ * GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE: the GPIO will be driven with open drain
+ *	(open emitter) which is the same as open drain mutatis mutandis but
+ *	pulled to ground
+ */
+#define GPIO_U300_CONFIG_DRIVE_PUSH_PULL	0x2000
+#define GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN	0x2001
+#define GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE	0x2002
+
+/*
+ * Register definitions for COH 901 335 variant
+ */
+#define U300_335_PORT_STRIDE				(0x1C)
+/* Port X Pin Data Register 32bit, this is both input and output (R/W) */
+#define U300_335_PXPDIR					(0x00)
+#define U300_335_PXPDOR					(0x00)
+/* Port X Pin Config Register 32bit (R/W) */
+#define U300_335_PXPCR					(0x04)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPCR_ALL_PINS_MODE_MASK		(0x0000FFFFUL)
+#define U300_GPIO_PXPCR_PIN_MODE_MASK			(0x00000003UL)
+#define U300_GPIO_PXPCR_PIN_MODE_SHIFT			(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_INPUT			(0x00000000UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL	(0x00000001UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN	(0x00000002UL)
+#define U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE	(0x00000003UL)
+/* Port X Interrupt Event Register 32bit (R/W) */
+#define U300_335_PXIEV					(0x08)
+/* Port X Interrupt Enable Register 32bit (R/W) */
+#define U300_335_PXIEN					(0x0C)
+/* Port X Interrupt Force Register 32bit (R/W) */
+#define U300_335_PXIFR					(0x10)
+/* Port X Interrupt Config Register 32bit (R/W) */
+#define U300_335_PXICR					(0x14)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXICR_ALL_IRQ_CONFIG_MASK		(0x000000FFUL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_MASK			(0x00000001UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_FALLING_EDGE		(0x00000000UL)
+#define U300_GPIO_PXICR_IRQ_CONFIG_RISING_EDGE		(0x00000001UL)
+/* Port X Pull-up Enable Register 32bit (R/W) */
+#define U300_335_PXPER					(0x18)
+/* This register layout is the same in both blocks */
+#define U300_GPIO_PXPER_ALL_PULL_UP_DISABLE_MASK	(0x000000FFUL)
+#define U300_GPIO_PXPER_PULL_UP_DISABLE			(0x00000001UL)
+/* Control Register 32bit (R/W) */
+#define U300_335_CR					(0x54)
+#define U300_335_CR_BLOCK_CLOCK_ENABLE			(0x00000001UL)
+
+/*
+ * Register definitions for COH 901 571 / 3 variant
+ */
+#define U300_571_PORT_STRIDE				(0x30)
+/*
+ * Control Register 32bit (R/W)
+ * bit 15-9 (mask 0x0000FE00) contains the number of cores. 8*cores
+ * gives the number of GPIO pins.
+ * bit 8-2  (mask 0x000001FC) contains the core version ID.
+ */
+#define U300_571_CR					(0x00)
+#define U300_571_CR_SYNC_SEL_ENABLE			(0x00000002UL)
+#define U300_571_CR_BLOCK_CLKRQ_ENABLE			(0x00000001UL)
+/*
+ * These registers have the same layout and function as the corresponding
+ * COH 901 335 registers, just at different offset.
+ */
+#define U300_571_PXPDIR					(0x04)
+#define U300_571_PXPDOR					(0x08)
+#define U300_571_PXPCR					(0x0C)
+#define U300_571_PXPER					(0x10)
+#define U300_571_PXIEV					(0x14)
+#define U300_571_PXIEN					(0x18)
+#define U300_571_PXIFR					(0x1C)
+#define U300_571_PXICR					(0x20)
+
+/* 8 bits per port, no version has more than 7 ports */
+#define U300_GPIO_PINS_PER_PORT 8
+#define U300_GPIO_MAX (U300_GPIO_PINS_PER_PORT * 7)
+
+struct u300_gpio {
+	struct gpio_chip chip;
+	struct list_head port_list;
+	struct clk *clk;
+	struct resource *memres;
+	void __iomem *base;
+	struct device *dev;
+	int irq_base;
+	u32 stride;
+	/* Register offsets */
+	u32 pcr;
+	u32 dor;
+	u32 dir;
+	u32 per;
+	u32 icr;
+	u32 ien;
+	u32 iev;
+};
 
 struct u300_gpio_port {
-	const char *name;
+	struct list_head node;
+	struct u300_gpio *gpio;
+	char name[8];
 	int irq;
 	int number;
+	u8 toggle_edge_mode;
 };
 
+/*
+ * Macro to expand to read a specific register found in the "gpio"
+ * struct. It requires the struct u300_gpio *gpio variable to exist in
+ * its context. It calculates the port offset from the given pin
+ * offset, muliplies by the port stride and adds the register offset
+ * so it provides a pointer to the desired register.
+ */
+#define U300_PIN_REG(pin, reg) \
+	(gpio->base + (pin >> 3) * gpio->stride + gpio->reg)
 
-static struct u300_gpio_port gpio_ports[] = {
-	{
-		.name = "gpio0",
-		.number = 0,
-	},
-	{
-		.name = "gpio1",
-		.number = 1,
-	},
-	{
-		.name = "gpio2",
-		.number = 2,
-	},
-#ifdef U300_COH901571_3
-	{
-		.name = "gpio3",
-		.number = 3,
-	},
-	{
-		.name = "gpio4",
-		.number = 4,
-	},
-#ifdef CONFIG_MACH_U300_BS335
-	{
-		.name = "gpio5",
-		.number = 5,
-	},
-	{
-		.name = "gpio6",
-		.number = 6,
-	},
-#endif
-#endif
+/*
+ * Provides a bitmask for a specific gpio pin inside an 8-bit GPIO
+ * register.
+ */
+#define U300_PIN_BIT(pin) \
+	(1 << (pin & 0x07))
 
+struct u300_gpio_confdata {
+	u16 bias_mode;
+	bool output;
+	int outval;
 };
 
+/* BS335 has seven ports of 8 bits each = GPIO pins 0..55 */
+#define BS335_GPIO_NUM_PORTS 7
+/* BS365 has five ports of 8 bits each = GPIO pins 0..39 */
+#define BS365_GPIO_NUM_PORTS 5
 
-#ifdef U300_COH901571_3
+#define U300_FLOATING_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_FLOAT, \
+	.output = false, \
+}
 
-/* Default input value */
-#define DEFAULT_OUTPUT_LOW   0
-#define DEFAULT_OUTPUT_HIGH  1
+#define U300_PULL_UP_INPUT { \
+	.bias_mode = GPIO_U300_CONFIG_BIAS_PULL_UP, \
+	.output = false, \
+}
 
-/* GPIO Pull-Up status */
-#define DISABLE_PULL_UP  0
-#define ENABLE_PULL_UP  1
+#define U300_OUTPUT_LOW { \
+	.output = true, \
+	.outval = 0, \
+}
 
-#define GPIO_NOT_USED 0
-#define GPIO_IN       1
-#define GPIO_OUT      2
+#define U300_OUTPUT_HIGH { \
+	.output = true, \
+	.outval = 1, \
+}
 
-struct u300_gpio_configuration_data {
-	unsigned char pin_usage;
-	unsigned char default_output_value;
-	unsigned char pull_up;
-};
 
 /* Initial configuration */
-const struct u300_gpio_configuration_data
-u300_gpio_config[U300_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
-#ifdef CONFIG_MACH_U300_BS335
+static const struct __initdata u300_gpio_confdata
+bs335_gpio_config[BS335_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 5, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 6, pind 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
 	}
-#endif
+};
 
-#ifdef CONFIG_MACH_U300_BS365
+static const struct __initdata u300_gpio_confdata
+bs365_gpio_config[BS365_GPIO_NUM_PORTS][U300_GPIO_PINS_PER_PORT] = {
 	/* Port 0, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_FLOATING_INPUT,
 	},
 	/* Port 1, pins 0-7 */
 	{
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_HIGH,  DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_LOW,
+		U300_FLOATING_INPUT,
+		U300_FLOATING_INPUT,
+		U300_OUTPUT_HIGH,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	},
 	/* Port 2, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,   DISABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_FLOATING_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 3, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 	},
 	/* Port 4, pins 0-7 */
 	{
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_IN,  DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
+		U300_PULL_UP_INPUT,
 		/* These 4 pins doesn't exist on DB3210 */
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP},
-		{GPIO_OUT, DEFAULT_OUTPUT_LOW,    ENABLE_PULL_UP}
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
+		U300_OUTPUT_LOW,
 	}
-#endif
-};
-#endif
-
-
-/* No users == we can power down GPIO */
-static int gpio_users;
-
-struct gpio_struct {
-	int (*callback)(void *);
-	void *data;
-	int users;
 };
 
-static struct gpio_struct gpio_pin[U300_GPIO_MAX];
-
-/*
- * Let drivers register callback in order to get notified when there is
- * an interrupt on the gpio pin
+/**
+ * to_u300_gpio() - get the pointer to u300_gpio
+ * @chip: the gpio chip member of the structure u300_gpio
  */
-int gpio_register_callback(unsigned gpio, int (*func)(void *arg), void *data)
+static inline struct u300_gpio *to_u300_gpio(struct gpio_chip *chip)
 {
-	if (gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "registered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = func;
-	gpio_pin[gpio].data = data;
-
-	return 0;
+	return container_of(chip, struct u300_gpio, chip);
 }
-EXPORT_SYMBOL(gpio_register_callback);
 
-int gpio_unregister_callback(unsigned gpio)
+static int u300_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
-	if (!gpio_pin[gpio].callback)
-		dev_warn(gpiodev, "%s: WARNING: callback already "
-			 "unregistered for gpio pin#%d\n", __func__, gpio);
-	gpio_pin[gpio].callback = NULL;
-	gpio_pin[gpio].data = NULL;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 
-	return 0;
+	return readl(U300_PIN_REG(offset, dir)) & U300_PIN_BIT(offset);
 }
-EXPORT_SYMBOL(gpio_unregister_callback);
 
-/* Non-zero means valid */
-int gpio_is_valid(int number)
+static void u300_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
-	if (number >= 0 &&
-	    number < (U300_GPIO_NUM_PORTS * U300_GPIO_PINS_PER_PORT))
-		return 1;
-	return 0;
-}
-EXPORT_SYMBOL(gpio_is_valid);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	unsigned long flags;
+	u32 val;
 
-int gpio_request(unsigned gpio, const char *label)
-{
-	if (gpio_pin[gpio].users)
-		return -EINVAL;
+	local_irq_save(flags);
+
+	val = readl(U300_PIN_REG(offset, dor));
+	if (value)
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
 	else
-		gpio_pin[gpio].users++;
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, dor));
 
-	gpio_users++;
-
-	return 0;
-}
-EXPORT_SYMBOL(gpio_request);
-
-void gpio_free(unsigned gpio)
-{
-	gpio_users--;
-	gpio_pin[gpio].users--;
-	if (unlikely(gpio_pin[gpio].users < 0)) {
-		dev_warn(gpiodev, "warning: gpio#%d release mismatch\n",
-			 gpio);
-		gpio_pin[gpio].users = 0;
-	}
-
-	return;
-}
-EXPORT_SYMBOL(gpio_free);
-
-/* This returns zero or nonzero */
-int gpio_get_value(unsigned gpio)
-{
-	return readl(virtbase + U300_GPIO_PXPDIR +
-	  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING) & (1 << (gpio & 0x07));
-}
-EXPORT_SYMBOL(gpio_get_value);
-
-/*
- * We hope that the compiler will optimize away the unused branch
- * in case "value" is a constant
- */
-void gpio_set_value(unsigned gpio, int value)
-{
-	u32 val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value) {
-		/* set */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val | (1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		/* clear */
-		val = readl(virtbase + U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING)
-		  & (1 << (gpio & 0x07));
-		writel(val & ~(1 << (gpio & 0x07)), virtbase +
-		  U300_GPIO_PXPDOR +
-		  PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
 	local_irq_restore(flags);
 }
-EXPORT_SYMBOL(gpio_set_value);
 
-int gpio_direction_input(unsigned gpio)
+static int u300_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
 {
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin*/
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
-	/* This is not needed since it sets the bits to zero.*/
-	/* val |= (U300_GPIO_PXPCR_PIN_MODE_INPUT << (gpio*2)); */
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
+	val = readl(U300_PIN_REG(offset, pcr));
+	/* Mask out this pin, note 2 bits per setting */
+	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((offset & 0x07) << 1));
+	writel(val, U300_PIN_REG(offset, pcr));
 	local_irq_restore(flags);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_input);
 
-int gpio_direction_output(unsigned gpio, int value)
+static int u300_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+				      int value)
 {
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
+	u32 oldmode;
 	u32 val;
 
-	if (gpio > U300_GPIO_MAX)
-		return -EINVAL;
-
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask out this pin */
-	val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << ((gpio & 0x07) << 1));
+	val = readl(U300_PIN_REG(offset, pcr));
 	/*
-	 * FIXME: configure for push/pull, open drain or open source per pin
-	 * in setup. The current driver will only support push/pull.
+	 * Drive mode must be set by the special mode set function, set
+	 * push/pull mode by default if no mode has been selected.
 	 */
-	val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
-			<< ((gpio & 0x07) << 1));
-	writel(val, virtbase + U300_GPIO_PXPCR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	gpio_set_value(gpio, value);
+	oldmode = val & (U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+	/* mode = 0 means input, else some mode is already set */
+	if (oldmode == 0) {
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK <<
+			 ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+	}
+	u300_gpio_set(chip, offset, value);
 	local_irq_restore(flags);
 	return 0;
 }
-EXPORT_SYMBOL(gpio_direction_output);
 
-/*
- * Enable an IRQ, edge is rising edge (!= 0) or falling edge (==0).
- */
-void enable_irq_on_gpio_pin(unsigned gpio, int edge)
+static int u300_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
 {
-	u32 val;
-	unsigned long flags;
-	local_irq_save(flags);
+	struct u300_gpio *gpio = to_u300_gpio(chip);
+	int retirq = gpio->irq_base + offset;
 
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val |= (1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val = readl(virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	if (edge)
-		val |= (1 << (gpio & 0x07));
-	else
-		val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXICR + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
+	dev_dbg(gpio->dev, "request IRQ for GPIO %d, return %d\n", offset,
+		retirq);
+	return retirq;
 }
-EXPORT_SYMBOL(enable_irq_on_gpio_pin);
 
-void disable_irq_on_gpio_pin(unsigned gpio)
+static int u300_gpio_config(struct gpio_chip *chip, unsigned offset,
+		     u16 param, unsigned long *data)
 {
-	u32 val;
+	struct u300_gpio *gpio = to_u300_gpio(chip);
 	unsigned long flags;
+	u32 val;
 
 	local_irq_save(flags);
-	val = readl(virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	val &= ~(1 << (gpio & 0x07));
-	writel(val, virtbase + U300_GPIO_PXIEN + PIN_TO_PORT(gpio) *
-				U300_GPIO_PORTX_SPACING);
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(disable_irq_on_gpio_pin);
-
-/* Enable (value == 0) or disable (value == 1) internal pullup */
-void gpio_pullup(unsigned gpio, int value)
-{
-	u32 val;
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (value) {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val | (1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	} else {
-		val = readl(virtbase + U300_GPIO_PXPER + PIN_TO_PORT(gpio) *
-					U300_GPIO_PORTX_SPACING);
-		writel(val & ~(1 << (gpio & 0x07)), virtbase + U300_GPIO_PXPER +
-				PIN_TO_PORT(gpio) * U300_GPIO_PORTX_SPACING);
-	}
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(gpio_pullup);
-
-static irqreturn_t gpio_irq_handler(int irq, void *dev_id)
-{
-	struct u300_gpio_port *port = dev_id;
-	u32 val;
-	int pin;
-
-	/* Read event register */
-	val = readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask with enable register */
-	val &= readl(virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Mask relevant bits */
-	val &= U300_GPIO_PXIEV_ALL_IRQ_EVENT_MASK;
-	/* ACK IRQ (clear event) */
-	writel(val, virtbase + U300_GPIO_PXIEV + port->number *
-				U300_GPIO_PORTX_SPACING);
-	/* Print message */
-	while (val != 0) {
-		unsigned gpio;
-
-		pin = __ffs(val);
-		/* mask off this pin */
-		val &= ~(1 << pin);
-		gpio = (port->number << 3) + pin;
-
-		if (gpio_pin[gpio].callback)
-			(void)gpio_pin[gpio].callback(gpio_pin[gpio].data);
-		else
-			dev_dbg(gpiodev, "stray GPIO IRQ on line %d\n",
-			       gpio);
-	}
-	return IRQ_HANDLED;
-}
-
-static void gpio_set_initial_values(void)
-{
-#ifdef U300_COH901571_3
-	int i, j;
-	unsigned long flags;
-	u32 val;
-
-	/* Write default values to all pins */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32) (u300_gpio_config[i][j].default_output_value != DEFAULT_OUTPUT_LOW) << j;
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPDOR + i * U300_GPIO_PORTX_SPACING);
+	switch (param) {
+	case GPIO_U300_CONFIG_BIAS_UNKNOWN:
+	case GPIO_U300_CONFIG_BIAS_FLOAT:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_BIAS_PULL_UP:
+		val = readl(U300_PIN_REG(offset, per));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, per));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_PUSH_PULL:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_DRAIN:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_DRAIN
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	case GPIO_U300_CONFIG_DRIVE_OPEN_SOURCE:
+		val = readl(U300_PIN_REG(offset, pcr));
+		val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK
+			 << ((offset & 0x07) << 1));
+		val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_OPEN_SOURCE
+			<< ((offset & 0x07) << 1));
+		writel(val, U300_PIN_REG(offset, pcr));
+		break;
+	default:
 		local_irq_restore(flags);
+		dev_err(gpio->dev, "illegal configuration requested\n");
+		return -EINVAL;
+	}
+	local_irq_restore(flags);
+	return 0;
+}
+
+static struct gpio_chip u300_gpio_chip = {
+	.label			= "u300-gpio-chip",
+	.owner			= THIS_MODULE,
+	.get			= u300_gpio_get,
+	.set			= u300_gpio_set,
+	.direction_input	= u300_gpio_direction_input,
+	.direction_output	= u300_gpio_direction_output,
+	.to_irq			= u300_gpio_to_irq,
+};
+
+static void u300_toggle_trigger(struct u300_gpio *gpio, unsigned offset)
+{
+	u32 val;
+
+	val = readl(U300_PIN_REG(offset, icr));
+	/* Set mode depending on state */
+	if (u300_gpio_get(&gpio->chip, offset)) {
+		/* High now, let's trigger on falling edge next then */
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on falling edge on pin %d\n",
+			offset);
+	} else {
+		/* Low now, let's trigger on rising edge next then */
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		dev_dbg(gpio->dev, "next IRQ on rising edge on pin %d\n",
+			offset);
+	}
+}
+
+static int u300_gpio_irq_type(struct irq_data *d, unsigned trigger)
+{
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
+	u32 val;
+
+	if ((trigger & IRQF_TRIGGER_RISING) &&
+	    (trigger & IRQF_TRIGGER_FALLING)) {
+		/*
+		 * The GPIO block can only trigger on falling OR rising edges,
+		 * not both. So we need to toggle the mode whenever the pin
+		 * goes from one state to the other with a special state flag
+		 */
+		dev_dbg(gpio->dev,
+			"trigger on both rising and falling edge on pin %d\n",
+			offset);
+		port->toggle_edge_mode |= U300_PIN_BIT(offset);
+		u300_toggle_trigger(gpio, offset);
+	} else if (trigger & IRQF_TRIGGER_RISING) {
+		dev_dbg(gpio->dev, "trigger on rising edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
+	} else if (trigger & IRQF_TRIGGER_FALLING) {
+		dev_dbg(gpio->dev, "trigger on falling edge on pin %d\n",
+			offset);
+		val = readl(U300_PIN_REG(offset, icr));
+		writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, icr));
+		port->toggle_edge_mode &= ~U300_PIN_BIT(offset);
 	}
 
-	/*
-	 * Put all pins that are set to either 'GPIO_OUT' or 'GPIO_NOT_USED'
-	 * to output and 'GPIO_IN' to input for each port. And initialize
-	 * default value on outputs.
-	 */
-	for (i = 0; i < U300_GPIO_NUM_PORTS; i++) {
-		for (j = 0; j < U300_GPIO_PINS_PER_PORT; j++) {
-			local_irq_save(flags);
-			val = readl(virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			/* Mask out this pin */
-			val &= ~(U300_GPIO_PXPCR_PIN_MODE_MASK << (j << 1));
+	return 0;
+}
 
-			if (u300_gpio_config[i][j].pin_usage != GPIO_IN)
-				val |= (U300_GPIO_PXPCR_PIN_MODE_OUTPUT_PUSH_PULL << (j << 1));
-			writel(val, virtbase + U300_GPIO_PXPCR +
-					 i * U300_GPIO_PORTX_SPACING);
-			local_irq_restore(flags);
+static void u300_gpio_irq_enable(struct irq_data *d)
+{
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val | U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+	local_irq_restore(flags);
+}
+
+static void u300_gpio_irq_disable(struct irq_data *d)
+{
+	struct u300_gpio_port *port = irq_data_get_irq_chip_data(d);
+	struct u300_gpio *gpio = port->gpio;
+	int offset = d->irq - gpio->irq_base;
+	u32 val;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	val = readl(U300_PIN_REG(offset, ien));
+	writel(val & ~U300_PIN_BIT(offset), U300_PIN_REG(offset, ien));
+	local_irq_restore(flags);
+}
+
+static struct irq_chip u300_gpio_irqchip = {
+	.name			= "u300-gpio-irqchip",
+	.irq_enable		= u300_gpio_irq_enable,
+	.irq_disable		= u300_gpio_irq_disable,
+	.irq_set_type		= u300_gpio_irq_type,
+
+};
+
+static void u300_gpio_irq_handler(unsigned irq, struct irq_desc *desc)
+{
+	struct u300_gpio_port *port = irq_get_handler_data(irq);
+	struct u300_gpio *gpio = port->gpio;
+	int pinoffset = port->number << 3; /* get the right stride */
+	unsigned long val;
+
+	desc->irq_data.chip->irq_ack(&desc->irq_data);
+	/* Read event register */
+	val = readl(U300_PIN_REG(pinoffset, iev));
+	/* Mask relevant bits */
+	val &= 0xFFU; /* 8 bits per port */
+	/* ACK IRQ (clear event) */
+	writel(val, U300_PIN_REG(pinoffset, iev));
+
+	/* Call IRQ handler */
+	if (val != 0) {
+		int irqoffset;
+
+		for_each_set_bit(irqoffset, &val, U300_GPIO_PINS_PER_PORT) {
+			int pin_irq = gpio->irq_base + (port->number << 3)
+				+ irqoffset;
+			int offset = pinoffset + irqoffset;
+
+			dev_dbg(gpio->dev, "GPIO IRQ %d on pin %d\n",
+				pin_irq, offset);
+			generic_handle_irq(pin_irq);
+			/*
+			 * Triggering IRQ on both rising and falling edge
+			 * needs mockery
+			 */
+			if (port->toggle_edge_mode & U300_PIN_BIT(offset))
+				u300_toggle_trigger(gpio, offset);
 		}
 	}
 
-	/* Enable or disable the internal pull-ups in the GPIO ASIC block */
-	for (i = 0; i < U300_GPIO_MAX; i++) {
-		val = 0;
-		for (j = 0; j < 8; j++)
-			val |= (u32)((u300_gpio_config[i][j].pull_up == DISABLE_PULL_UP) << j);
-		local_irq_save(flags);
-		writel(val, virtbase + U300_GPIO_PXPER + i * U300_GPIO_PORTX_SPACING);
-		local_irq_restore(flags);
-	}
-#endif
+	desc->irq_data.chip->irq_unmask(&desc->irq_data);
 }
 
-static int __init gpio_probe(struct platform_device *pdev)
+static void __init u300_gpio_init_pin(struct u300_gpio *gpio,
+				      int offset,
+				      const struct u300_gpio_confdata *conf)
 {
-	u32 val;
-	int err = 0;
-	int i;
-	int num_irqs;
+	/* Set mode: input or output */
+	if (conf->output) {
+		u300_gpio_direction_output(&gpio->chip, offset, conf->outval);
 
-	gpiodev = &pdev->dev;
-	memset(gpio_pin, 0, sizeof(gpio_pin));
+		/* Deactivate bias mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_BIAS_FLOAT,
+				 NULL);
+
+		/* Set drive mode for output */
+		u300_gpio_config(&gpio->chip, offset,
+				 GPIO_U300_CONFIG_DRIVE_PUSH_PULL, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as output, value: %d\n",
+			offset, conf->outval);
+	} else {
+		u300_gpio_direction_input(&gpio->chip, offset);
+
+		/* Always set output low on input pins */
+		u300_gpio_set(&gpio->chip, offset, 0);
+
+		/* Set bias mode for input */
+		u300_gpio_config(&gpio->chip, offset, conf->bias_mode, NULL);
+
+		dev_dbg(gpio->dev, "set up pin %d as input, bias: %04x\n",
+			offset, conf->bias_mode);
+	}
+}
+
+static void __init u300_gpio_init_coh901571(struct u300_gpio *gpio,
+				     struct u300_gpio_platform *plat)
+{
+	int i, j;
+
+	/* Write default config and values to all pins */
+	for (i = 0; i < plat->ports; i++) {
+		for (j = 0; j < 8; j++) {
+			const struct u300_gpio_confdata *conf;
+			int offset = (i*8) + j;
+
+			if (plat->variant == U300_GPIO_COH901571_3_BS335)
+				conf = &bs335_gpio_config[i][j];
+			else if (plat->variant == U300_GPIO_COH901571_3_BS365)
+				conf = &bs365_gpio_config[i][j];
+			else
+				break;
+
+			u300_gpio_init_pin(gpio, offset, conf);
+		}
+	}
+}
+
+static inline void u300_gpio_free_ports(struct u300_gpio *gpio)
+{
+	struct u300_gpio_port *port;
+	struct list_head *p, *n;
+
+	list_for_each_safe(p, n, &gpio->port_list) {
+		port = list_entry(p, struct u300_gpio_port, node);
+		list_del(&port->node);
+		free_irq(port->irq, port);
+		kfree(port);
+	}
+}
+
+static int __init u300_gpio_probe(struct platform_device *pdev)
+{
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio;
+	int err = 0;
+	int portno;
+	u32 val;
+	u32 ifr;
+	int i;
+
+	gpio = kzalloc(sizeof(struct u300_gpio), GFP_KERNEL);
+	if (gpio == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	gpio->chip = u300_gpio_chip;
+	gpio->chip.ngpio = plat->ports * U300_GPIO_PINS_PER_PORT;
+	gpio->irq_base = plat->gpio_irq_base;
+	gpio->chip.dev = &pdev->dev;
+	gpio->chip.base = plat->gpio_base;
+	gpio->dev = &pdev->dev;
 
 	/* Get GPIO clock */
-	clk = clk_get(&pdev->dev, NULL);
-	if (IS_ERR(clk)) {
-		err = PTR_ERR(clk);
-		dev_err(gpiodev, "could not get GPIO clock\n");
+	gpio->clk = clk_get(gpio->dev, NULL);
+	if (IS_ERR(gpio->clk)) {
+		err = PTR_ERR(gpio->clk);
+		dev_err(gpio->dev, "could not get GPIO clock\n");
 		goto err_no_clk;
 	}
-	err = clk_enable(clk);
+	err = clk_enable(gpio->clk);
 	if (err) {
-		dev_err(gpiodev, "could not enable GPIO clock\n");
+		dev_err(gpio->dev, "could not enable GPIO clock\n");
 		goto err_no_clk_enable;
 	}
 
-	memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!memres)
+	gpio->memres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!gpio->memres) {
+		dev_err(gpio->dev, "could not get GPIO memory resource\n");
+		err = -ENODEV;
 		goto err_no_resource;
+	}
 
-	if (!request_mem_region(memres->start, resource_size(memres),
+	if (!request_mem_region(gpio->memres->start,
+				resource_size(gpio->memres),
 				"GPIO Controller")) {
 		err = -ENODEV;
 		goto err_no_ioregion;
 	}
 
-	virtbase = ioremap(memres->start, resource_size(memres));
-	if (!virtbase) {
+	gpio->base = ioremap(gpio->memres->start, resource_size(gpio->memres));
+	if (!gpio->base) {
 		err = -ENOMEM;
 		goto err_no_ioremap;
 	}
-	dev_info(gpiodev, "remapped 0x%08x to %p\n",
-		 memres->start, virtbase);
 
-#ifdef U300_COH901335
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 335\n");
-	/* Turn on the GPIO block */
-	writel(U300_GPIO_CR_BLOCK_CLOCK_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+	if (plat->variant == U300_GPIO_COH901335) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 335\n");
+		gpio->stride = U300_335_PORT_STRIDE;
+		gpio->pcr = U300_335_PXPCR;
+		gpio->dor = U300_335_PXPDOR;
+		gpio->dir = U300_335_PXPDIR;
+		gpio->per = U300_335_PXPER;
+		gpio->icr = U300_335_PXICR;
+		gpio->ien = U300_335_PXIEN;
+		gpio->iev = U300_335_PXIEV;
+		ifr = U300_335_PXIFR;
 
-#ifdef U300_COH901571_3
-	dev_info(gpiodev, "initializing GPIO Controller COH 901 571/3\n");
-	val = readl(virtbase + U300_GPIO_CR);
-	dev_info(gpiodev, "COH901571/3 block version: %d, " \
-	       "number of cores: %d\n",
-	       ((val & 0x0000FE00) >> 9),
-	       ((val & 0x000001FC) >> 2));
-	writel(U300_GPIO_CR_BLOCK_CLKRQ_ENABLE, virtbase + U300_GPIO_CR);
-#endif
+		/* Turn on the GPIO block */
+		writel(U300_335_CR_BLOCK_CLOCK_ENABLE,
+		       gpio->base + U300_335_CR);
+	} else if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+		   plat->variant == U300_GPIO_COH901571_3_BS365) {
+		dev_info(gpio->dev,
+			 "initializing GPIO Controller COH 901 571/3\n");
+		gpio->stride = U300_571_PORT_STRIDE;
+		gpio->pcr = U300_571_PXPCR;
+		gpio->dor = U300_571_PXPDOR;
+		gpio->dir = U300_571_PXPDIR;
+		gpio->per = U300_571_PXPER;
+		gpio->icr = U300_571_PXICR;
+		gpio->ien = U300_571_PXIEN;
+		gpio->iev = U300_571_PXIEV;
+		ifr = U300_571_PXIFR;
 
-	gpio_set_initial_values();
-
-	for (num_irqs = 0 ; num_irqs < U300_GPIO_NUM_PORTS; num_irqs++) {
-
-		gpio_ports[num_irqs].irq =
-			platform_get_irq_byname(pdev,
-						gpio_ports[num_irqs].name);
-
-		err = request_irq(gpio_ports[num_irqs].irq,
-				  gpio_irq_handler, IRQF_DISABLED,
-				  gpio_ports[num_irqs].name,
-				  &gpio_ports[num_irqs]);
-		if (err) {
-			dev_err(gpiodev, "cannot allocate IRQ for %s!\n",
-				gpio_ports[num_irqs].name);
-			goto err_no_irq;
-		}
-		/* Turns off PortX_irq_force */
-		writel(0x0, virtbase + U300_GPIO_PXIFR +
-				 num_irqs * U300_GPIO_PORTX_SPACING);
+		val = readl(gpio->base + U300_571_CR);
+		dev_info(gpio->dev, "COH901571/3 block version: %d, " \
+			 "number of cores: %d totalling %d pins\n",
+			 ((val & 0x000001FC) >> 2),
+			 ((val & 0x0000FE00) >> 9),
+			 ((val & 0x0000FE00) >> 9) * 8);
+		writel(U300_571_CR_BLOCK_CLKRQ_ENABLE,
+		       gpio->base + U300_571_CR);
+		u300_gpio_init_coh901571(gpio, plat);
+	} else {
+		dev_err(gpio->dev, "unknown block variant\n");
+		err = -ENODEV;
+		goto err_unknown_variant;
 	}
 
+	/* Add each port with its IRQ separately */
+	INIT_LIST_HEAD(&gpio->port_list);
+	for (portno = 0 ; portno < plat->ports; portno++) {
+		struct u300_gpio_port *port =
+			kmalloc(sizeof(struct u300_gpio_port), GFP_KERNEL);
+
+		if (!port) {
+			dev_err(gpio->dev, "out of memory\n");
+			err = -ENOMEM;
+			goto err_no_port;
+		}
+
+		snprintf(port->name, 8, "gpio%d", portno);
+		port->number = portno;
+		port->gpio = gpio;
+
+		port->irq = platform_get_irq_byname(pdev,
+						    port->name);
+
+		dev_dbg(gpio->dev, "register IRQ %d for %s\n", port->irq,
+			port->name);
+
+		irq_set_chained_handler(port->irq, u300_gpio_irq_handler);
+		irq_set_handler_data(port->irq, port);
+
+		/* For each GPIO pin set the unique IRQ handler */
+		for (i = 0; i < U300_GPIO_PINS_PER_PORT; i++) {
+			int irqno = gpio->irq_base + (portno << 3) + i;
+
+			dev_dbg(gpio->dev, "handler for IRQ %d on %s\n",
+				irqno, port->name);
+			irq_set_chip_and_handler(irqno, &u300_gpio_irqchip,
+						 handle_simple_irq);
+			set_irq_flags(irqno, IRQF_VALID);
+			irq_set_chip_data(irqno, port);
+		}
+
+		/* Turns off irq force (test register) for this port */
+		writel(0x0, gpio->base + portno * gpio->stride + ifr);
+
+		list_add_tail(&port->node, &gpio->port_list);
+	}
+	dev_dbg(gpio->dev, "initialized %d GPIO ports\n", portno);
+
+	err = gpiochip_add(&gpio->chip);
+	if (err) {
+		dev_err(gpio->dev, "unable to add gpiochip: %d\n", err);
+		goto err_no_chip;
+	}
+
+	platform_set_drvdata(pdev, gpio);
+
 	return 0;
 
- err_no_irq:
-	for (i = 0; i < num_irqs; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
- err_no_ioremap:
-	release_mem_region(memres->start, resource_size(memres));
- err_no_ioregion:
- err_no_resource:
-	clk_disable(clk);
- err_no_clk_enable:
-	clk_put(clk);
- err_no_clk:
-	dev_info(gpiodev, "module ERROR:%d\n", err);
+err_no_chip:
+err_no_port:
+	u300_gpio_free_ports(gpio);
+err_unknown_variant:
+	iounmap(gpio->base);
+err_no_ioremap:
+	release_mem_region(gpio->memres->start, resource_size(gpio->memres));
+err_no_ioregion:
+err_no_resource:
+	clk_disable(gpio->clk);
+err_no_clk_enable:
+	clk_put(gpio->clk);
+err_no_clk:
+	kfree(gpio);
+	dev_info(&pdev->dev, "module ERROR:%d\n", err);
 	return err;
 }
 
-static int __exit gpio_remove(struct platform_device *pdev)
+static int __exit u300_gpio_remove(struct platform_device *pdev)
 {
-	int i;
+	struct u300_gpio_platform *plat = dev_get_platdata(&pdev->dev);
+	struct u300_gpio *gpio = platform_get_drvdata(pdev);
+	int err;
 
 	/* Turn off the GPIO block */
-	writel(0x00000000U, virtbase + U300_GPIO_CR);
-	for (i = 0 ; i < U300_GPIO_NUM_PORTS; i++)
-		free_irq(gpio_ports[i].irq, &gpio_ports[i]);
-	iounmap(virtbase);
-	release_mem_region(memres->start, resource_size(memres));
-	clk_disable(clk);
-	clk_put(clk);
+	if (plat->variant == U300_GPIO_COH901335)
+		writel(0x00000000U, gpio->base + U300_335_CR);
+	if (plat->variant == U300_GPIO_COH901571_3_BS335 ||
+	    plat->variant == U300_GPIO_COH901571_3_BS365)
+		writel(0x00000000U, gpio->base + U300_571_CR);
+
+	err = gpiochip_remove(&gpio->chip);
+	if (err < 0) {
+		dev_err(gpio->dev, "unable to remove gpiochip: %d\n", err);
+		return err;
+	}
+	u300_gpio_free_ports(gpio);
+	iounmap(gpio->base);
+	release_mem_region(gpio->memres->start,
+			   resource_size(gpio->memres));
+	clk_disable(gpio->clk);
+	clk_put(gpio->clk);
+	platform_set_drvdata(pdev, NULL);
+	kfree(gpio);
 	return 0;
 }
 
-static struct platform_driver gpio_driver = {
+static struct platform_driver u300_gpio_driver = {
 	.driver		= {
 		.name	= "u300-gpio",
 	},
-	.remove		= __exit_p(gpio_remove),
+	.remove		= __exit_p(u300_gpio_remove),
 };
 
 
 static int __init u300_gpio_init(void)
 {
-	return platform_driver_probe(&gpio_driver, gpio_probe);
+	return platform_driver_probe(&u300_gpio_driver, u300_gpio_probe);
 }
 
 static void __exit u300_gpio_exit(void)
 {
-	platform_driver_unregister(&gpio_driver);
+	platform_driver_unregister(&u300_gpio_driver);
 }
 
 arch_initcall(u300_gpio_init);
 module_exit(u300_gpio_exit);
 
 MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
-
-#ifdef U300_COH901571_3
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 571/3 GPIO driver");
-#endif
-
-#ifdef U300_COH901335
-MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335 GPIO driver");
-#endif
-
+MODULE_DESCRIPTION("ST-Ericsson AB COH 901 335/COH 901 571/3 GPIO driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index ce045a8..f07e425 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -67,11 +67,11 @@
 MODULE_PARM_DESC(i915_enable_rc6,
 		"Enable power-saving render C-state 6 (default: true)");
 
-unsigned int i915_enable_fbc __read_mostly = 1;
+unsigned int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
 MODULE_PARM_DESC(i915_enable_fbc,
 		"Enable frame buffer compression for power savings "
-		"(default: false)");
+		"(default: -1 (use per-chip default))");
 
 unsigned int i915_lvds_downclock __read_mostly = 0;
 module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 56a8554..04411ad 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1799,6 +1799,7 @@
 	struct drm_framebuffer *fb;
 	struct intel_framebuffer *intel_fb;
 	struct drm_i915_gem_object *obj;
+	int enable_fbc;
 
 	DRM_DEBUG_KMS("\n");
 
@@ -1839,8 +1840,15 @@
 	intel_fb = to_intel_framebuffer(fb);
 	obj = intel_fb->obj;
 
-	if (!i915_enable_fbc) {
-		DRM_DEBUG_KMS("fbc disabled per module param (default off)\n");
+	enable_fbc = i915_enable_fbc;
+	if (enable_fbc < 0) {
+		DRM_DEBUG_KMS("fbc set to per-chip default\n");
+		enable_fbc = 1;
+		if (INTEL_INFO(dev)->gen <= 5)
+			enable_fbc = 0;
+	}
+	if (!enable_fbc) {
+		DRM_DEBUG_KMS("fbc disabled per module param\n");
 		dev_priv->no_fbc_reason = FBC_MODULE_PARAM;
 		goto out_disable;
 	}
@@ -4687,13 +4695,13 @@
 		bpc = 6; /* min is 18bpp */
 		break;
 	case 24:
-		bpc = min((unsigned int)8, display_bpc);
+		bpc = 8;
 		break;
 	case 30:
-		bpc = min((unsigned int)10, display_bpc);
+		bpc = 10;
 		break;
 	case 48:
-		bpc = min((unsigned int)12, display_bpc);
+		bpc = 12;
 		break;
 	default:
 		DRM_DEBUG("unsupported depth, assuming 24 bits\n");
@@ -4701,10 +4709,12 @@
 		break;
 	}
 
+	display_bpc = min(display_bpc, bpc);
+
 	DRM_DEBUG_DRIVER("setting pipe bpc to %d (max display bpc %d)\n",
 			 bpc, display_bpc);
 
-	*pipe_bpp = bpc * 3;
+	*pipe_bpp = display_bpc * 3;
 
 	return display_bpc != bpc;
 }
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 0b2ee9d..fe1099d 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -337,9 +337,6 @@
 					   struct drm_connector *connector,
 					   struct intel_load_detect_pipe *old);
 
-extern struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB);
-extern int intel_sdvo_supports_hotplug(struct drm_connector *connector);
-extern void intel_sdvo_set_hotplug(struct drm_connector *connector, int enable);
 extern void intelfb_restore(void);
 extern void intel_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
 				    u16 blue, int regno);
diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index 30fe554..6348c49 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -92,6 +92,11 @@
 	*/
 	uint16_t attached_output;
 
+	/*
+	 * Hotplug activation bits for this device
+	 */
+	uint8_t hotplug_active[2];
+
 	/**
 	 * This is used to select the color range of RBG outputs in HDMI mode.
 	 * It is only valid when using TMDS encoding and 8 bit per color mode.
@@ -1208,74 +1213,20 @@
 	return true;
 }
 
-/* No use! */
-#if 0
-struct drm_connector* intel_sdvo_find(struct drm_device *dev, int sdvoB)
-{
-	struct drm_connector *connector = NULL;
-	struct intel_sdvo *iout = NULL;
-	struct intel_sdvo *sdvo;
-
-	/* find the sdvo connector */
-	list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
-		iout = to_intel_sdvo(connector);
-
-		if (iout->type != INTEL_OUTPUT_SDVO)
-			continue;
-
-		sdvo = iout->dev_priv;
-
-		if (sdvo->sdvo_reg == SDVOB && sdvoB)
-			return connector;
-
-		if (sdvo->sdvo_reg == SDVOC && !sdvoB)
-			return connector;
-
-	}
-
-	return NULL;
-}
-
-int intel_sdvo_supports_hotplug(struct drm_connector *connector)
+static int intel_sdvo_supports_hotplug(struct intel_sdvo *intel_sdvo)
 {
 	u8 response[2];
-	u8 status;
-	struct intel_sdvo *intel_sdvo;
-	DRM_DEBUG_KMS("\n");
-
-	if (!connector)
-		return 0;
-
-	intel_sdvo = to_intel_sdvo(connector);
 
 	return intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT,
 				    &response, 2) && response[0];
 }
 
-void intel_sdvo_set_hotplug(struct drm_connector *connector, int on)
+static void intel_sdvo_enable_hotplug(struct intel_encoder *encoder)
 {
-	u8 response[2];
-	u8 status;
-	struct intel_sdvo *intel_sdvo = to_intel_sdvo(connector);
+	struct intel_sdvo *intel_sdvo = to_intel_sdvo(&encoder->base);
 
-	intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-	intel_sdvo_read_response(intel_sdvo, &response, 2);
-
-	if (on) {
-		intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_HOT_PLUG_SUPPORT, NULL, 0);
-		status = intel_sdvo_read_response(intel_sdvo, &response, 2);
-
-		intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-	} else {
-		response[0] = 0;
-		response[1] = 0;
-		intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &response, 2);
-	}
-
-	intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, NULL, 0);
-	intel_sdvo_read_response(intel_sdvo, &response, 2);
+	intel_sdvo_write_cmd(intel_sdvo, SDVO_CMD_SET_ACTIVE_HOT_PLUG, &intel_sdvo->hotplug_active, 2);
 }
-#endif
 
 static bool
 intel_sdvo_multifunc_encoder(struct intel_sdvo *intel_sdvo)
@@ -2045,6 +1996,7 @@
 {
 	struct drm_encoder *encoder = &intel_sdvo->base.base;
 	struct drm_connector *connector;
+	struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
 	struct intel_connector *intel_connector;
 	struct intel_sdvo_connector *intel_sdvo_connector;
 
@@ -2062,7 +2014,17 @@
 
 	intel_connector = &intel_sdvo_connector->base;
 	connector = &intel_connector->base;
-	connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
+	if (intel_sdvo_supports_hotplug(intel_sdvo) & (1 << device)) {
+		connector->polled = DRM_CONNECTOR_POLL_HPD;
+		intel_sdvo->hotplug_active[0] |= 1 << device;
+		/* Some SDVO devices have one-shot hotplug interrupts.
+		 * Ensure that they get re-enabled when an interrupt happens.
+		 */
+		intel_encoder->hot_plug = intel_sdvo_enable_hotplug;
+		intel_sdvo_enable_hotplug(intel_encoder);
+	}
+	else
+		connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;
 	encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
 	connector->connector_type = DRM_MODE_CONNECTOR_DVID;
 
@@ -2569,6 +2531,14 @@
 	if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps))
 		goto err;
 
+	/* Set up hotplug command - note paranoia about contents of reply.
+	 * We assume that the hardware is in a sane state, and only touch
+	 * the bits we think we understand.
+	 */
+	intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG,
+			     &intel_sdvo->hotplug_active, 2);
+	intel_sdvo->hotplug_active[0] &= ~0x3;
+
 	if (intel_sdvo_output_setup(intel_sdvo,
 				    intel_sdvo->caps.output_flags) != true) {
 		DRM_DEBUG_KMS("SDVO output failed to setup on SDVO%c\n",
diff --git a/drivers/gpu/drm/radeon/atombios_dp.c b/drivers/gpu/drm/radeon/atombios_dp.c
index 7ad43c6..4da2388 100644
--- a/drivers/gpu/drm/radeon/atombios_dp.c
+++ b/drivers/gpu/drm/radeon/atombios_dp.c
@@ -115,6 +115,7 @@
 	u8 msg[20];
 	int msg_bytes = send_bytes + 4;
 	u8 ack;
+	unsigned retry;
 
 	if (send_bytes > 16)
 		return -1;
@@ -125,20 +126,20 @@
 	msg[3] = (msg_bytes << 4) | (send_bytes - 1);
 	memcpy(&msg[4], send, send_bytes);
 
-	while (1) {
+	for (retry = 0; retry < 4; retry++) {
 		ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
 					    msg, msg_bytes, NULL, 0, delay, &ack);
 		if (ret < 0)
 			return ret;
 		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
-			break;
+			return send_bytes;
 		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
 			udelay(400);
 		else
 			return -EIO;
 	}
 
-	return send_bytes;
+	return -EIO;
 }
 
 static int radeon_dp_aux_native_read(struct radeon_connector *radeon_connector,
@@ -149,26 +150,29 @@
 	int msg_bytes = 4;
 	u8 ack;
 	int ret;
+	unsigned retry;
 
 	msg[0] = address;
 	msg[1] = address >> 8;
 	msg[2] = AUX_NATIVE_READ << 4;
 	msg[3] = (msg_bytes << 4) | (recv_bytes - 1);
 
-	while (1) {
+	for (retry = 0; retry < 4; retry++) {
 		ret = radeon_process_aux_ch(dig_connector->dp_i2c_bus,
 					    msg, msg_bytes, recv, recv_bytes, delay, &ack);
-		if (ret == 0)
-			return -EPROTO;
 		if (ret < 0)
 			return ret;
 		if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK)
 			return ret;
 		else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER)
 			udelay(400);
+		else if (ret == 0)
+			return -EPROTO;
 		else
 			return -EIO;
 	}
+
+	return -EIO;
 }
 
 static void radeon_write_dpcd_reg(struct radeon_connector *radeon_connector,
diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c
index dc0a5b5..c4ffa14f 100644
--- a/drivers/gpu/drm/radeon/evergreen.c
+++ b/drivers/gpu/drm/radeon/evergreen.c
@@ -1404,7 +1404,8 @@
 	/* Initialize the ring buffer's read and write pointers */
 	WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
 	WREG32(CP_RB_RPTR_WR, 0);
-	WREG32(CP_RB_WPTR, 0);
+	rdev->cp.wptr = 0;
+	WREG32(CP_RB_WPTR, rdev->cp.wptr);
 
 	/* set the wb address wether it's enabled or not */
 	WREG32(CP_RB_RPTR_ADDR,
@@ -1426,7 +1427,6 @@
 	WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
 
 	rdev->cp.rptr = RREG32(CP_RB_RPTR);
-	rdev->cp.wptr = RREG32(CP_RB_WPTR);
 
 	evergreen_cp_start(rdev);
 	rdev->cp.ready = true;
@@ -1590,48 +1590,6 @@
 	return backend_map;
 }
 
-static void evergreen_program_channel_remap(struct radeon_device *rdev)
-{
-	u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
-	tmp = RREG32(MC_SHARED_CHMAP);
-	switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	default:
-		/* default mapping */
-		mc_shared_chremap = 0x00fac688;
-		break;
-	}
-
-	switch (rdev->family) {
-	case CHIP_HEMLOCK:
-	case CHIP_CYPRESS:
-	case CHIP_BARTS:
-		tcp_chan_steer_lo = 0x54763210;
-		tcp_chan_steer_hi = 0x0000ba98;
-		break;
-	case CHIP_JUNIPER:
-	case CHIP_REDWOOD:
-	case CHIP_CEDAR:
-	case CHIP_PALM:
-	case CHIP_SUMO:
-	case CHIP_SUMO2:
-	case CHIP_TURKS:
-	case CHIP_CAICOS:
-	default:
-		tcp_chan_steer_lo = 0x76543210;
-		tcp_chan_steer_hi = 0x0000ba98;
-		break;
-	}
-
-	WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
-	WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
-	WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
 static void evergreen_gpu_init(struct radeon_device *rdev)
 {
 	u32 cc_rb_backend_disable = 0;
@@ -2078,8 +2036,6 @@
 	WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
 	WREG32(HDP_ADDR_CONFIG, gb_addr_config);
 
-	evergreen_program_channel_remap(rdev);
-
 	num_shader_engines = ((RREG32(GB_ADDR_CONFIG) & NUM_SHADER_ENGINES(3)) >> 12) + 1;
 	grbm_gfx_index = INSTANCE_BROADCAST_WRITES;
 
@@ -3171,21 +3127,23 @@
 }
 
 int evergreen_copy_blit(struct radeon_device *rdev,
-			uint64_t src_offset, uint64_t dst_offset,
-			unsigned num_pages, struct radeon_fence *fence)
+			uint64_t src_offset,
+			uint64_t dst_offset,
+			unsigned num_gpu_pages,
+			struct radeon_fence *fence)
 {
 	int r;
 
 	mutex_lock(&rdev->r600_blit.mutex);
 	rdev->r600_blit.vb_ib = NULL;
-	r = evergreen_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+	r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
 	if (r) {
 		if (rdev->r600_blit.vb_ib)
 			radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
 		mutex_unlock(&rdev->r600_blit.mutex);
 		return r;
 	}
-	evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+	evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
 	evergreen_blit_done_copy(rdev, fence);
 	mutex_unlock(&rdev->r600_blit.mutex);
 	return 0;
diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c
index cbf57d7..8c79ca9 100644
--- a/drivers/gpu/drm/radeon/ni.c
+++ b/drivers/gpu/drm/radeon/ni.c
@@ -569,36 +569,6 @@
 	return backend_map;
 }
 
-static void cayman_program_channel_remap(struct radeon_device *rdev)
-{
-	u32 tcp_chan_steer_lo, tcp_chan_steer_hi, mc_shared_chremap, tmp;
-
-	tmp = RREG32(MC_SHARED_CHMAP);
-	switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
-	case 0:
-	case 1:
-	case 2:
-	case 3:
-	default:
-		/* default mapping */
-		mc_shared_chremap = 0x00fac688;
-		break;
-	}
-
-	switch (rdev->family) {
-	case CHIP_CAYMAN:
-	default:
-		//tcp_chan_steer_lo = 0x54763210
-		tcp_chan_steer_lo = 0x76543210;
-		tcp_chan_steer_hi = 0x0000ba98;
-		break;
-	}
-
-	WREG32(TCP_CHAN_STEER_LO, tcp_chan_steer_lo);
-	WREG32(TCP_CHAN_STEER_HI, tcp_chan_steer_hi);
-	WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
 static u32 cayman_get_disable_mask_per_asic(struct radeon_device *rdev,
 					    u32 disable_mask_per_se,
 					    u32 max_disable_mask_per_se,
@@ -842,8 +812,6 @@
 	WREG32(DMIF_ADDR_CONFIG, gb_addr_config);
 	WREG32(HDP_ADDR_CONFIG, gb_addr_config);
 
-	cayman_program_channel_remap(rdev);
-
 	/* primary versions */
 	WREG32(CC_RB_BACKEND_DISABLE, cc_rb_backend_disable);
 	WREG32(CC_SYS_RB_BACKEND_DISABLE, cc_rb_backend_disable);
@@ -1187,7 +1155,8 @@
 
 	/* Initialize the ring buffer's read and write pointers */
 	WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA);
-	WREG32(CP_RB0_WPTR, 0);
+	rdev->cp.wptr = 0;
+	WREG32(CP_RB0_WPTR, rdev->cp.wptr);
 
 	/* set the wb address wether it's enabled or not */
 	WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1207,7 +1176,6 @@
 	WREG32(CP_RB0_BASE, rdev->cp.gpu_addr >> 8);
 
 	rdev->cp.rptr = RREG32(CP_RB0_RPTR);
-	rdev->cp.wptr = RREG32(CP_RB0_WPTR);
 
 	/* ring1  - compute only */
 	/* Set ring buffer size */
@@ -1220,7 +1188,8 @@
 
 	/* Initialize the ring buffer's read and write pointers */
 	WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA);
-	WREG32(CP_RB1_WPTR, 0);
+	rdev->cp1.wptr = 0;
+	WREG32(CP_RB1_WPTR, rdev->cp1.wptr);
 
 	/* set the wb address wether it's enabled or not */
 	WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1232,7 +1201,6 @@
 	WREG32(CP_RB1_BASE, rdev->cp1.gpu_addr >> 8);
 
 	rdev->cp1.rptr = RREG32(CP_RB1_RPTR);
-	rdev->cp1.wptr = RREG32(CP_RB1_WPTR);
 
 	/* ring2 - compute only */
 	/* Set ring buffer size */
@@ -1245,7 +1213,8 @@
 
 	/* Initialize the ring buffer's read and write pointers */
 	WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA);
-	WREG32(CP_RB2_WPTR, 0);
+	rdev->cp2.wptr = 0;
+	WREG32(CP_RB2_WPTR, rdev->cp2.wptr);
 
 	/* set the wb address wether it's enabled or not */
 	WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC);
@@ -1257,7 +1226,6 @@
 	WREG32(CP_RB2_BASE, rdev->cp2.gpu_addr >> 8);
 
 	rdev->cp2.rptr = RREG32(CP_RB2_RPTR);
-	rdev->cp2.wptr = RREG32(CP_RB2_WPTR);
 
 	/* start the rings */
 	cayman_cp_start(rdev);
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index f2204cb..7fcdbbb 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -721,11 +721,11 @@
 int r100_copy_blit(struct radeon_device *rdev,
 		   uint64_t src_offset,
 		   uint64_t dst_offset,
-		   unsigned num_pages,
+		   unsigned num_gpu_pages,
 		   struct radeon_fence *fence)
 {
 	uint32_t cur_pages;
-	uint32_t stride_bytes = PAGE_SIZE;
+	uint32_t stride_bytes = RADEON_GPU_PAGE_SIZE;
 	uint32_t pitch;
 	uint32_t stride_pixels;
 	unsigned ndw;
@@ -737,7 +737,7 @@
 	/* radeon pitch is /64 */
 	pitch = stride_bytes / 64;
 	stride_pixels = stride_bytes / 4;
-	num_loops = DIV_ROUND_UP(num_pages, 8191);
+	num_loops = DIV_ROUND_UP(num_gpu_pages, 8191);
 
 	/* Ask for enough room for blit + flush + fence */
 	ndw = 64 + (10 * num_loops);
@@ -746,12 +746,12 @@
 		DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw);
 		return -EINVAL;
 	}
-	while (num_pages > 0) {
-		cur_pages = num_pages;
+	while (num_gpu_pages > 0) {
+		cur_pages = num_gpu_pages;
 		if (cur_pages > 8191) {
 			cur_pages = 8191;
 		}
-		num_pages -= cur_pages;
+		num_gpu_pages -= cur_pages;
 
 		/* pages are in Y direction - height
 		   page width in X direction - width */
@@ -773,8 +773,8 @@
 		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
 		radeon_ring_write(rdev, 0);
 		radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16));
-		radeon_ring_write(rdev, num_pages);
-		radeon_ring_write(rdev, num_pages);
+		radeon_ring_write(rdev, num_gpu_pages);
+		radeon_ring_write(rdev, num_gpu_pages);
 		radeon_ring_write(rdev, cur_pages | (stride_pixels << 16));
 	}
 	radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0));
@@ -990,7 +990,8 @@
 	/* Force read & write ptr to 0 */
 	WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA | RADEON_RB_NO_UPDATE);
 	WREG32(RADEON_CP_RB_RPTR_WR, 0);
-	WREG32(RADEON_CP_RB_WPTR, 0);
+	rdev->cp.wptr = 0;
+	WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr);
 
 	/* set the wb address whether it's enabled or not */
 	WREG32(R_00070C_CP_RB_RPTR_ADDR,
@@ -1007,9 +1008,6 @@
 	WREG32(RADEON_CP_RB_CNTL, tmp);
 	udelay(10);
 	rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR);
-	rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR);
-	/* protect against crazy HW on resume */
-	rdev->cp.wptr &= rdev->cp.ptr_mask;
 	/* Set cp mode to bus mastering & enable cp*/
 	WREG32(RADEON_CP_CSQ_MODE,
 	       REG_SET(RADEON_INDIRECT2_START, indirect2_start) |
diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c
index f240583..a1f3ba0 100644
--- a/drivers/gpu/drm/radeon/r200.c
+++ b/drivers/gpu/drm/radeon/r200.c
@@ -84,7 +84,7 @@
 int r200_copy_dma(struct radeon_device *rdev,
 		  uint64_t src_offset,
 		  uint64_t dst_offset,
-		  unsigned num_pages,
+		  unsigned num_gpu_pages,
 		  struct radeon_fence *fence)
 {
 	uint32_t size;
@@ -93,7 +93,7 @@
 	int r = 0;
 
 	/* radeon pitch is /64 */
-	size = num_pages << PAGE_SHIFT;
+	size = num_gpu_pages << RADEON_GPU_PAGE_SHIFT;
 	num_loops = DIV_ROUND_UP(size, 0x1FFFFF);
 	r = radeon_ring_lock(rdev, num_loops * 4 + 64);
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index aa5571b..720dd99 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -2209,7 +2209,8 @@
 	/* Initialize the ring buffer's read and write pointers */
 	WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA);
 	WREG32(CP_RB_RPTR_WR, 0);
-	WREG32(CP_RB_WPTR, 0);
+	rdev->cp.wptr = 0;
+	WREG32(CP_RB_WPTR, rdev->cp.wptr);
 
 	/* set the wb address whether it's enabled or not */
 	WREG32(CP_RB_RPTR_ADDR,
@@ -2231,7 +2232,6 @@
 	WREG32(CP_DEBUG, (1 << 27) | (1 << 28));
 
 	rdev->cp.rptr = RREG32(CP_RB_RPTR);
-	rdev->cp.wptr = RREG32(CP_RB_WPTR);
 
 	r600_cp_start(rdev);
 	rdev->cp.ready = true;
@@ -2353,21 +2353,23 @@
 }
 
 int r600_copy_blit(struct radeon_device *rdev,
-		   uint64_t src_offset, uint64_t dst_offset,
-		   unsigned num_pages, struct radeon_fence *fence)
+		   uint64_t src_offset,
+		   uint64_t dst_offset,
+		   unsigned num_gpu_pages,
+		   struct radeon_fence *fence)
 {
 	int r;
 
 	mutex_lock(&rdev->r600_blit.mutex);
 	rdev->r600_blit.vb_ib = NULL;
-	r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE);
+	r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
 	if (r) {
 		if (rdev->r600_blit.vb_ib)
 			radeon_ib_free(rdev, &rdev->r600_blit.vb_ib);
 		mutex_unlock(&rdev->r600_blit.mutex);
 		return r;
 	}
-	r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE);
+	r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE);
 	r600_blit_done_copy(rdev, fence);
 	mutex_unlock(&rdev->r600_blit.mutex);
 	return 0;
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index 32807ba..c1e056b 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -322,6 +322,7 @@
 
 #define RADEON_GPU_PAGE_SIZE 4096
 #define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1)
+#define RADEON_GPU_PAGE_SHIFT 12
 
 struct radeon_gart {
 	dma_addr_t			table_addr;
@@ -914,17 +915,17 @@
 	int (*copy_blit)(struct radeon_device *rdev,
 			 uint64_t src_offset,
 			 uint64_t dst_offset,
-			 unsigned num_pages,
+			 unsigned num_gpu_pages,
 			 struct radeon_fence *fence);
 	int (*copy_dma)(struct radeon_device *rdev,
 			uint64_t src_offset,
 			uint64_t dst_offset,
-			unsigned num_pages,
+			unsigned num_gpu_pages,
 			struct radeon_fence *fence);
 	int (*copy)(struct radeon_device *rdev,
 		    uint64_t src_offset,
 		    uint64_t dst_offset,
-		    unsigned num_pages,
+		    unsigned num_gpu_pages,
 		    struct radeon_fence *fence);
 	uint32_t (*get_engine_clock)(struct radeon_device *rdev);
 	void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock);
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index 3d7a0d7..3dedaa0 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -75,7 +75,7 @@
 int r100_copy_blit(struct radeon_device *rdev,
 		   uint64_t src_offset,
 		   uint64_t dst_offset,
-		   unsigned num_pages,
+		   unsigned num_gpu_pages,
 		   struct radeon_fence *fence);
 int r100_set_surface_reg(struct radeon_device *rdev, int reg,
 			 uint32_t tiling_flags, uint32_t pitch,
@@ -143,7 +143,7 @@
 extern int r200_copy_dma(struct radeon_device *rdev,
 			 uint64_t src_offset,
 			 uint64_t dst_offset,
-			 unsigned num_pages,
+			 unsigned num_gpu_pages,
 			 struct radeon_fence *fence);
 void r200_set_safe_registers(struct radeon_device *rdev);
 
@@ -311,7 +311,7 @@
 int r600_ring_test(struct radeon_device *rdev);
 int r600_copy_blit(struct radeon_device *rdev,
 		   uint64_t src_offset, uint64_t dst_offset,
-		   unsigned num_pages, struct radeon_fence *fence);
+		   unsigned num_gpu_pages, struct radeon_fence *fence);
 void r600_hpd_init(struct radeon_device *rdev);
 void r600_hpd_fini(struct radeon_device *rdev);
 bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
@@ -403,7 +403,7 @@
 void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib);
 int evergreen_copy_blit(struct radeon_device *rdev,
 			uint64_t src_offset, uint64_t dst_offset,
-			unsigned num_pages, struct radeon_fence *fence);
+			unsigned num_gpu_pages, struct radeon_fence *fence);
 void evergreen_hpd_init(struct radeon_device *rdev);
 void evergreen_hpd_fini(struct radeon_device *rdev);
 bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd);
diff --git a/drivers/gpu/drm/radeon/radeon_connectors.c b/drivers/gpu/drm/radeon/radeon_connectors.c
index c4b8741..bce63fd 100644
--- a/drivers/gpu/drm/radeon/radeon_connectors.c
+++ b/drivers/gpu/drm/radeon/radeon_connectors.c
@@ -68,11 +68,11 @@
 	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort) {
 		int saved_dpms = connector->dpms;
 
-		if (radeon_hpd_sense(rdev, radeon_connector->hpd.hpd) &&
-		    radeon_dp_needs_link_train(radeon_connector))
-			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
-		else
+		/* Only turn off the display it it's physically disconnected */
+		if (!radeon_hpd_sense(rdev, radeon_connector->hpd.hpd))
 			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_OFF);
+		else if (radeon_dp_needs_link_train(radeon_connector))
+			drm_helper_connector_dpms(connector, DRM_MODE_DPMS_ON);
 		connector->dpms = saved_dpms;
 	}
 }
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 3189a7e..fde25c0 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -208,24 +208,26 @@
 	int xorigin = 0, yorigin = 0;
 	int w = radeon_crtc->cursor_width;
 
-	if (x < 0)
-		xorigin = -x + 1;
-	if (y < 0)
-		yorigin = -y + 1;
-	if (xorigin >= CURSOR_WIDTH)
-		xorigin = CURSOR_WIDTH - 1;
-	if (yorigin >= CURSOR_HEIGHT)
-		yorigin = CURSOR_HEIGHT - 1;
+	if (ASIC_IS_AVIVO(rdev)) {
+		/* avivo cursor are offset into the total surface */
+		x += crtc->x;
+		y += crtc->y;
+	}
+	DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
+
+	if (x < 0) {
+		xorigin = min(-x, CURSOR_WIDTH - 1);
+		x = 0;
+	}
+	if (y < 0) {
+		yorigin = min(-y, CURSOR_HEIGHT - 1);
+		y = 0;
+	}
 
 	if (ASIC_IS_AVIVO(rdev)) {
 		int i = 0;
 		struct drm_crtc *crtc_p;
 
-		/* avivo cursor are offset into the total surface */
-		x += crtc->x;
-		y += crtc->y;
-		DRM_DEBUG("x %d y %d c->x %d c->y %d\n", x, y, crtc->x, crtc->y);
-
 		/* avivo cursor image can't end on 128 pixel boundary or
 		 * go past the end of the frame if both crtcs are enabled
 		 */
@@ -253,16 +255,12 @@
 
 	radeon_lock_cursor(crtc, true);
 	if (ASIC_IS_DCE4(rdev)) {
-		WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset,
-		       ((xorigin ? 0 : x) << 16) |
-		       (yorigin ? 0 : y));
+		WREG32(EVERGREEN_CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
 		WREG32(EVERGREEN_CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
 		WREG32(EVERGREEN_CUR_SIZE + radeon_crtc->crtc_offset,
 		       ((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
 	} else if (ASIC_IS_AVIVO(rdev)) {
-		WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset,
-			     ((xorigin ? 0 : x) << 16) |
-			     (yorigin ? 0 : y));
+		WREG32(AVIVO_D1CUR_POSITION + radeon_crtc->crtc_offset, (x << 16) | y);
 		WREG32(AVIVO_D1CUR_HOT_SPOT + radeon_crtc->crtc_offset, (xorigin << 16) | yorigin);
 		WREG32(AVIVO_D1CUR_SIZE + radeon_crtc->crtc_offset,
 		       ((w - 1) << 16) | (radeon_crtc->cursor_height - 1));
@@ -276,8 +274,8 @@
 			| yorigin));
 		WREG32(RADEON_CUR_HORZ_VERT_POSN + radeon_crtc->crtc_offset,
 		       (RADEON_CUR_LOCK
-			| ((xorigin ? 0 : x) << 16)
-			| (yorigin ? 0 : y)));
+			| (x << 16)
+			| y));
 		/* offset is from DISP(2)_BASE_ADDRESS */
 		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
 								      (yorigin * 256)));
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 6cc17fb..6adb3e5 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -473,8 +473,8 @@
 	spin_lock_irqsave(&dev->event_lock, flags);
 	radeon_crtc->unpin_work = NULL;
 unlock_free:
-	drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
 	spin_unlock_irqrestore(&dev->event_lock, flags);
+	drm_gem_object_unreference_unlocked(old_radeon_fb->obj);
 	radeon_fence_unref(&work->fence);
 	kfree(work);
 
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index 319d85d..13690f3 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -1507,7 +1507,14 @@
 		switch (mode) {
 		case DRM_MODE_DPMS_ON:
 			args.ucAction = ATOM_ENABLE;
-			atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+			/* workaround for DVOOutputControl on some RS690 systems */
+			if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) {
+				u32 reg = RREG32(RADEON_BIOS_3_SCRATCH);
+				WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE);
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+				WREG32(RADEON_BIOS_3_SCRATCH, reg);
+			} else
+				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
 			if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) {
 				args.ucAction = ATOM_LCD_BLON;
 				atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 9b86fb0..0b5468b 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -277,7 +277,12 @@
 		DRM_ERROR("Trying to move memory with CP turned off.\n");
 		return -EINVAL;
 	}
-	r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence);
+
+	BUILD_BUG_ON((PAGE_SIZE % RADEON_GPU_PAGE_SIZE) != 0);
+
+	r = radeon_copy(rdev, old_start, new_start,
+			new_mem->num_pages * (PAGE_SIZE / RADEON_GPU_PAGE_SIZE), /* GPU pages */
+			fence);
 	/* FIXME: handle copy error */
 	r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL,
 				      evict, no_wait_reserve, no_wait_gpu, new_mem);
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index 4720d00..b13c2ee 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -536,55 +536,6 @@
 	return backend_map;
 }
 
-static void rv770_program_channel_remap(struct radeon_device *rdev)
-{
-	u32 tcp_chan_steer, mc_shared_chremap, tmp;
-	bool force_no_swizzle;
-
-	switch (rdev->family) {
-	case CHIP_RV770:
-	case CHIP_RV730:
-		force_no_swizzle = false;
-		break;
-	case CHIP_RV710:
-	case CHIP_RV740:
-	default:
-		force_no_swizzle = true;
-		break;
-	}
-
-	tmp = RREG32(MC_SHARED_CHMAP);
-	switch ((tmp & NOOFCHAN_MASK) >> NOOFCHAN_SHIFT) {
-	case 0:
-	case 1:
-	default:
-		/* default mapping */
-		mc_shared_chremap = 0x00fac688;
-		break;
-	case 2:
-	case 3:
-		if (force_no_swizzle)
-			mc_shared_chremap = 0x00fac688;
-		else
-			mc_shared_chremap = 0x00bbc298;
-		break;
-	}
-
-	if (rdev->family == CHIP_RV740)
-		tcp_chan_steer = 0x00ef2a60;
-	else
-		tcp_chan_steer = 0x00fac688;
-
-	/* RV770 CE has special chremap setup */
-	if (rdev->pdev->device == 0x944e) {
-		tcp_chan_steer = 0x00b08b08;
-		mc_shared_chremap = 0x00b08b08;
-	}
-
-	WREG32(TCP_CHAN_STEER, tcp_chan_steer);
-	WREG32(MC_SHARED_CHREMAP, mc_shared_chremap);
-}
-
 static void rv770_gpu_init(struct radeon_device *rdev)
 {
 	int i, j, num_qd_pipes;
@@ -785,8 +736,6 @@
 	WREG32(DCP_TILING_CONFIG, (gb_tiling_config & 0xffff));
 	WREG32(HDP_TILING_CONFIG, (gb_tiling_config & 0xffff));
 
-	rv770_program_channel_remap(rdev);
-
 	WREG32(CC_RB_BACKEND_DISABLE,      cc_rb_backend_disable);
 	WREG32(CC_GC_SHADER_PIPE_CONFIG,   cc_gc_shader_pipe_config);
 	WREG32(GC_USER_SHADER_PIPE_CONFIG, cc_gc_shader_pipe_config);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index a4d38d8..ef06194 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -394,7 +394,8 @@
 
 	if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) {
 		if (bo->ttm == NULL) {
-			ret = ttm_bo_add_ttm(bo, false);
+			bool zero = !(old_man->flags & TTM_MEMTYPE_FLAG_FIXED);
+			ret = ttm_bo_add_ttm(bo, zero);
 			if (ret)
 				goto out_err;
 		}
diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c
index a597039..72ca689 100644
--- a/drivers/hid/hid-wacom.c
+++ b/drivers/hid/hid-wacom.c
@@ -373,6 +373,8 @@
 	hidinput = list_entry(hdev->inputs.next, struct hid_input, list);
 	input = hidinput->input;
 
+	__set_bit(INPUT_PROP_POINTER, input->propbit);
+
 	/* Basics */
 	input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL);
 
diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c
index 59d83e8..9323837 100644
--- a/drivers/hwmon/coretemp.c
+++ b/drivers/hwmon/coretemp.c
@@ -36,17 +36,25 @@
 #include <linux/cpu.h>
 #include <linux/pci.h>
 #include <linux/smp.h>
+#include <linux/moduleparam.h>
 #include <asm/msr.h>
 #include <asm/processor.h>
 
 #define DRVNAME	"coretemp"
 
+/*
+ * force_tjmax only matters when TjMax can't be read from the CPU itself.
+ * When set, it replaces the driver's suboptimal heuristic.
+ */
+static int force_tjmax;
+module_param_named(tjmax, force_tjmax, int, 0444);
+MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius");
+
 #define BASE_SYSFS_ATTR_NO	2	/* Sysfs Base attr no for coretemp */
 #define NUM_REAL_CORES		16	/* Number of Real cores per cpu */
 #define CORETEMP_NAME_LENGTH	17	/* String Length of attrs */
 #define MAX_CORE_ATTRS		4	/* Maximum no of basic attrs */
-#define MAX_THRESH_ATTRS	3	/* Maximum no of Threshold attrs */
-#define TOTAL_ATTRS		(MAX_CORE_ATTRS + MAX_THRESH_ATTRS)
+#define TOTAL_ATTRS		(MAX_CORE_ATTRS + 1)
 #define MAX_CORE_DATA		(NUM_REAL_CORES + BASE_SYSFS_ATTR_NO)
 
 #ifdef CONFIG_SMP
@@ -69,8 +77,6 @@
  *		This value is passed as "id" field to rdmsr/wrmsr functions.
  * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS,
  *		from where the temperature values should be read.
- * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT,
- *		from where the thresholds are read.
  * @attr_size:  Total number of pre-core attrs displayed in the sysfs.
  * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data.
  *		Otherwise, temp_data holds coretemp data.
@@ -79,13 +85,11 @@
 struct temp_data {
 	int temp;
 	int ttarget;
-	int tmin;
 	int tjmax;
 	unsigned long last_updated;
 	unsigned int cpu;
 	u32 cpu_core_id;
 	u32 status_reg;
-	u32 intrpt_reg;
 	int attr_size;
 	bool is_pkg_data;
 	bool valid;
@@ -143,19 +147,6 @@
 	return sprintf(buf, "%d\n", (eax >> 5) & 1);
 }
 
-static ssize_t show_max_alarm(struct device *dev,
-				struct device_attribute *devattr, char *buf)
-{
-	u32 eax, edx;
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-
-	rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx);
-
-	return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1));
-}
-
 static ssize_t show_tjmax(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -174,83 +165,6 @@
 	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget);
 }
 
-static ssize_t store_ttarget(struct device *dev,
-				struct device_attribute *devattr,
-				const char *buf, size_t count)
-{
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-	u32 eax, edx;
-	unsigned long val;
-	int diff;
-
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
-
-	/*
-	 * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms
-	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
-	 */
-	if (val > tdata->tjmax || val > 127000)
-		return -EINVAL;
-
-	diff = (tdata->tjmax - val) / 1000;
-
-	mutex_lock(&tdata->update_lock);
-	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
-	eax = (eax & ~THERM_MASK_THRESHOLD1) |
-				(diff << THERM_SHIFT_THRESHOLD1);
-	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
-	tdata->ttarget = val;
-	mutex_unlock(&tdata->update_lock);
-
-	return count;
-}
-
-static ssize_t show_tmin(struct device *dev,
-			struct device_attribute *devattr, char *buf)
-{
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct platform_data *pdata = dev_get_drvdata(dev);
-
-	return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin);
-}
-
-static ssize_t store_tmin(struct device *dev,
-				struct device_attribute *devattr,
-				const char *buf, size_t count)
-{
-	struct platform_data *pdata = dev_get_drvdata(dev);
-	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
-	struct temp_data *tdata = pdata->core_data[attr->index];
-	u32 eax, edx;
-	unsigned long val;
-	int diff;
-
-	if (strict_strtoul(buf, 10, &val))
-		return -EINVAL;
-
-	/*
-	 * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms
-	 * of milli degree celsius. Hence don't accept val > (127 * 1000)
-	 */
-	if (val > tdata->tjmax || val > 127000)
-		return -EINVAL;
-
-	diff = (tdata->tjmax - val) / 1000;
-
-	mutex_lock(&tdata->update_lock);
-	rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx);
-	eax = (eax & ~THERM_MASK_THRESHOLD0) |
-				(diff << THERM_SHIFT_THRESHOLD0);
-	wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx);
-	tdata->tmin = val;
-	mutex_unlock(&tdata->update_lock);
-
-	return count;
-}
-
 static ssize_t show_temp(struct device *dev,
 			struct device_attribute *devattr, char *buf)
 {
@@ -374,7 +288,6 @@
 
 static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev)
 {
-	/* The 100C is default for both mobile and non mobile CPUs */
 	int err;
 	u32 eax, edx;
 	u32 val;
@@ -385,7 +298,8 @@
 	 */
 	err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
 	if (err) {
-		dev_warn(dev, "Unable to read TjMax from CPU.\n");
+		if (c->x86_model > 0xe && c->x86_model != 0x1c)
+			dev_warn(dev, "Unable to read TjMax from CPU %u\n", id);
 	} else {
 		val = (eax >> 16) & 0xff;
 		/*
@@ -393,11 +307,17 @@
 		 * will be used
 		 */
 		if (val) {
-			dev_info(dev, "TjMax is %d C.\n", val);
+			dev_dbg(dev, "TjMax is %d degrees C\n", val);
 			return val * 1000;
 		}
 	}
 
+	if (force_tjmax) {
+		dev_notice(dev, "TjMax forced to %d degrees C by user\n",
+			   force_tjmax);
+		return force_tjmax * 1000;
+	}
+
 	/*
 	 * An assumption is made for early CPUs and unreadable MSR.
 	 * NOTE: the calculated value may not be correct.
@@ -414,21 +334,6 @@
 	rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx);
 }
 
-static int get_pkg_tjmax(unsigned int cpu, struct device *dev)
-{
-	int err;
-	u32 eax, edx, val;
-
-	err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx);
-	if (!err) {
-		val = (eax >> 16) & 0xff;
-		if (val)
-			return val * 1000;
-	}
-	dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu);
-	return 100000; /* Default TjMax: 100 degree celsius */
-}
-
 static int create_name_attr(struct platform_data *pdata, struct device *dev)
 {
 	sysfs_attr_init(&pdata->name_attr.attr);
@@ -442,19 +347,14 @@
 				int attr_no)
 {
 	int err, i;
-	static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev,
+	static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev,
 			struct device_attribute *devattr, char *buf) = {
 			show_label, show_crit_alarm, show_temp, show_tjmax,
-			show_max_alarm, show_ttarget, show_tmin };
-	static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev,
-			struct device_attribute *devattr, const char *buf,
-			size_t count) = { NULL, NULL, NULL, NULL, NULL,
-					store_ttarget, store_tmin };
-	static const char *names[TOTAL_ATTRS] = {
+			show_ttarget };
+	static const char *const names[TOTAL_ATTRS] = {
 					"temp%d_label", "temp%d_crit_alarm",
 					"temp%d_input", "temp%d_crit",
-					"temp%d_max_alarm", "temp%d_max",
-					"temp%d_max_hyst" };
+					"temp%d_max" };
 
 	for (i = 0; i < tdata->attr_size; i++) {
 		snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i],
@@ -462,10 +362,6 @@
 		sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr);
 		tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i];
 		tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO;
-		if (rw_ptr[i]) {
-			tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR;
-			tdata->sd_attrs[i].dev_attr.store = rw_ptr[i];
-		}
 		tdata->sd_attrs[i].dev_attr.show = rd_ptr[i];
 		tdata->sd_attrs[i].index = attr_no;
 		err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr);
@@ -481,9 +377,9 @@
 }
 
 
-static int __devinit chk_ucode_version(struct platform_device *pdev)
+static int __cpuinit chk_ucode_version(unsigned int cpu)
 {
-	struct cpuinfo_x86 *c = &cpu_data(pdev->id);
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	int err;
 	u32 edx;
 
@@ -494,17 +390,15 @@
 	 */
 	if (c->x86_model == 0xe && c->x86_mask < 0xc) {
 		/* check for microcode update */
-		err = smp_call_function_single(pdev->id, get_ucode_rev_on_cpu,
+		err = smp_call_function_single(cpu, get_ucode_rev_on_cpu,
 					       &edx, 1);
 		if (err) {
-			dev_err(&pdev->dev,
-				"Cannot determine microcode revision of "
-				"CPU#%u (%d)!\n", pdev->id, err);
+			pr_err("Cannot determine microcode revision of "
+			       "CPU#%u (%d)!\n", cpu, err);
 			return -ENODEV;
 		} else if (edx < 0x39) {
-			dev_err(&pdev->dev,
-				"Errata AE18 not fixed, update BIOS or "
-				"microcode of the CPU!\n");
+			pr_err("Errata AE18 not fixed, update BIOS or "
+			       "microcode of the CPU!\n");
 			return -ENODEV;
 		}
 	}
@@ -538,8 +432,6 @@
 
 	tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS :
 							MSR_IA32_THERM_STATUS;
-	tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT :
-						MSR_IA32_THERM_INTERRUPT;
 	tdata->is_pkg_data = pkg_flag;
 	tdata->cpu = cpu;
 	tdata->cpu_core_id = TO_CORE_ID(cpu);
@@ -548,11 +440,11 @@
 	return tdata;
 }
 
-static int create_core_data(struct platform_data *pdata,
-				struct platform_device *pdev,
+static int create_core_data(struct platform_device *pdev,
 				unsigned int cpu, int pkg_flag)
 {
 	struct temp_data *tdata;
+	struct platform_data *pdata = platform_get_drvdata(pdev);
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
 	u32 eax, edx;
 	int err, attr_no;
@@ -588,20 +480,21 @@
 		goto exit_free;
 
 	/* We can access status register. Get Critical Temperature */
-	if (pkg_flag)
-		tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev);
-	else
-		tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
+	tdata->tjmax = get_tjmax(c, cpu, &pdev->dev);
 
 	/*
-	 * Test if we can access the intrpt register. If so, increase the
-	 * 'size' enough to have ttarget/tmin/max_alarm interfaces.
-	 * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT
+	 * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET.
+	 * The target temperature is available on older CPUs but not in this
+	 * register. Atoms don't have the register at all.
 	 */
-	err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx);
-	if (!err) {
-		tdata->attr_size += MAX_THRESH_ATTRS;
-		tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000;
+	if (c->x86_model > 0xe && c->x86_model != 0x1c) {
+		err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET,
+					&eax, &edx);
+		if (!err) {
+			tdata->ttarget
+			  = tdata->tjmax - ((eax >> 8) & 0xff) * 1000;
+			tdata->attr_size++;
+		}
 	}
 
 	pdata->core_data[attr_no] = tdata;
@@ -613,22 +506,20 @@
 
 	return 0;
 exit_free:
+	pdata->core_data[attr_no] = NULL;
 	kfree(tdata);
 	return err;
 }
 
 static void coretemp_add_core(unsigned int cpu, int pkg_flag)
 {
-	struct platform_data *pdata;
 	struct platform_device *pdev = coretemp_get_pdev(cpu);
 	int err;
 
 	if (!pdev)
 		return;
 
-	pdata = platform_get_drvdata(pdev);
-
-	err = create_core_data(pdata, pdev, cpu, pkg_flag);
+	err = create_core_data(pdev, cpu, pkg_flag);
 	if (err)
 		dev_err(&pdev->dev, "Adding Core %u failed\n", cpu);
 }
@@ -652,11 +543,6 @@
 	struct platform_data *pdata;
 	int err;
 
-	/* Check the microcode version of the CPU */
-	err = chk_ucode_version(pdev);
-	if (err)
-		return err;
-
 	/* Initialize the per-package data structures */
 	pdata = kzalloc(sizeof(struct platform_data), GFP_KERNEL);
 	if (!pdata)
@@ -666,7 +552,7 @@
 	if (err)
 		goto exit_free;
 
-	pdata->phys_proc_id = TO_PHYS_ID(pdev->id);
+	pdata->phys_proc_id = pdev->id;
 	platform_set_drvdata(pdev, pdata);
 
 	pdata->hwmon_dev = hwmon_device_register(&pdev->dev);
@@ -718,7 +604,7 @@
 
 	mutex_lock(&pdev_list_mutex);
 
-	pdev = platform_device_alloc(DRVNAME, cpu);
+	pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu));
 	if (!pdev) {
 		err = -ENOMEM;
 		pr_err("Device allocation failed\n");
@@ -738,7 +624,7 @@
 	}
 
 	pdev_entry->pdev = pdev;
-	pdev_entry->phys_proc_id = TO_PHYS_ID(cpu);
+	pdev_entry->phys_proc_id = pdev->id;
 
 	list_add_tail(&pdev_entry->list, &pdev_list);
 	mutex_unlock(&pdev_list_mutex);
@@ -799,6 +685,10 @@
 		return;
 
 	if (!pdev) {
+		/* Check the microcode version of the CPU */
+		if (chk_ucode_version(cpu))
+			return;
+
 		/*
 		 * Alright, we have DTS support.
 		 * We are bringing the _first_ core in this pkg
diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c
index 257957c..4f7c3fc 100644
--- a/drivers/hwmon/ds620.c
+++ b/drivers/hwmon/ds620.c
@@ -72,7 +72,7 @@
 	char valid;		/* !=0 if following fields are valid */
 	unsigned long last_updated;	/* In jiffies */
 
-	u16 temp[3];		/* Register values, word */
+	s16 temp[3];		/* Register values, word */
 };
 
 /*
diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
index a561c3a..397fc59 100644
--- a/drivers/hwmon/pmbus/pmbus_core.c
+++ b/drivers/hwmon/pmbus/pmbus_core.c
@@ -978,6 +978,8 @@
 struct pmbus_limit_attr {
 	u16 reg;		/* Limit register */
 	bool update;		/* True if register needs updates */
+	bool low;		/* True if low limit; for limits with compare
+				   functions only */
 	const char *attr;	/* Attribute name */
 	const char *alarm;	/* Alarm attribute name */
 	u32 sbit;		/* Alarm attribute status bit */
@@ -1029,7 +1031,8 @@
 				if (attr->compare) {
 					pmbus_add_boolean_cmp(data, name,
 						l->alarm, index,
-						cbase, cindex,
+						l->low ? cindex : cbase,
+						l->low ? cbase : cindex,
 						attr->sbase + page, l->sbit);
 				} else {
 					pmbus_add_boolean_reg(data, name,
@@ -1366,11 +1369,13 @@
 static const struct pmbus_limit_attr temp_limit_attrs[] = {
 	{
 		.reg = PMBUS_UT_WARN_LIMIT,
+		.low = true,
 		.attr = "min",
 		.alarm = "min_alarm",
 		.sbit = PB_TEMP_UT_WARNING,
 	}, {
 		.reg = PMBUS_UT_FAULT_LIMIT,
+		.low = true,
 		.attr = "lcrit",
 		.alarm = "lcrit_alarm",
 		.sbit = PB_TEMP_UT_FAULT,
@@ -1399,11 +1404,13 @@
 static const struct pmbus_limit_attr temp_limit_attrs23[] = {
 	{
 		.reg = PMBUS_UT_WARN_LIMIT,
+		.low = true,
 		.attr = "min",
 		.alarm = "min_alarm",
 		.sbit = PB_TEMP_UT_WARNING,
 	}, {
 		.reg = PMBUS_UT_FAULT_LIMIT,
+		.low = true,
 		.attr = "lcrit",
 		.alarm = "lcrit_alarm",
 		.sbit = PB_TEMP_UT_FAULT,
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 17cf1ab..8c2844e 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -329,8 +329,8 @@
 			  struct i2c_board_info *info);
 static int w83791d_remove(struct i2c_client *client);
 
-static int w83791d_read(struct i2c_client *client, u8 register);
-static int w83791d_write(struct i2c_client *client, u8 register, u8 value);
+static int w83791d_read(struct i2c_client *client, u8 reg);
+static int w83791d_write(struct i2c_client *client, u8 reg, u8 value);
 static struct w83791d_data *w83791d_update_device(struct device *dev);
 
 #ifdef DEBUG
diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c
index 5d8aed5..c01e951 100644
--- a/drivers/i2c/busses/i2c-ixp2000.c
+++ b/drivers/i2c/busses/i2c-ixp2000.c
@@ -35,7 +35,7 @@
 #include <linux/slab.h>
 
 #include <mach/hardware.h>	/* Pick up IXP2000-specific bits */
-#include <mach/gpio.h>
+#include <mach/gpio-ixp2000.h>
 
 static inline int ixp2000_scl_pin(void *data)
 {
diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c
index 000a78e..6dede8f 100644
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -28,7 +28,7 @@
 #include <linux/platform_device.h>
 
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/at91sam9_smc.h>
 
 #define DRV_NAME "at91_ide"
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 2747980..16f69be 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -435,7 +435,12 @@
 	if (!(rq->cmd_flags & REQ_FLUSH))
 		return BLKPREP_OK;
 
-	cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+	if (rq->special) {
+		cmd = rq->special;
+		memset(cmd, 0, sizeof(*cmd));
+	} else {
+		cmd = kzalloc(sizeof(*cmd), GFP_ATOMIC);
+	}
 
 	/* FIXME: map struct ide_taskfile on rq->cmd[] */
 	BUG_ON(cmd == NULL);
diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c
index 17bf9d9..6cd642a 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_cm.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c
@@ -287,7 +287,7 @@
 	if (test_bit(RELEASE_RESOURCES, &ep->com.flags)) {
 		cxgb3_remove_tid(ep->com.tdev, (void *)ep, ep->hwtid);
 		dst_release(ep->dst);
-		l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+		l2t_release(ep->com.tdev, ep->l2t);
 	}
 	kfree(ep);
 }
@@ -1178,7 +1178,7 @@
 		release_tid(ep->com.tdev, GET_TID(rpl), NULL);
 	cxgb3_free_atid(ep->com.tdev, ep->atid);
 	dst_release(ep->dst);
-	l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+	l2t_release(ep->com.tdev, ep->l2t);
 	put_ep(&ep->com);
 	return CPL_RET_BUF_DONE;
 }
@@ -1377,7 +1377,7 @@
 	if (!child_ep) {
 		printk(KERN_ERR MOD "%s - failed to allocate ep entry!\n",
 		       __func__);
-		l2t_release(L2DATA(tdev), l2t);
+		l2t_release(tdev, l2t);
 		dst_release(dst);
 		goto reject;
 	}
@@ -1956,7 +1956,7 @@
 	if (!err)
 		goto out;
 
-	l2t_release(L2DATA(h->rdev.t3cdev_p), ep->l2t);
+	l2t_release(h->rdev.t3cdev_p, ep->l2t);
 fail4:
 	dst_release(ep->dst);
 fail3:
@@ -2127,7 +2127,7 @@
 	PDBG("%s ep %p redirect to dst %p l2t %p\n", __func__, ep, new,
 	     l2t);
 	dst_hold(new);
-	l2t_release(L2DATA(ep->com.tdev), ep->l2t);
+	l2t_release(ep->com.tdev, ep->l2t);
 	ep->l2t = l2t;
 	dst_release(old);
 	ep->dst = new;
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 7b404e5..e34eeb8 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -668,4 +668,3 @@
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
 MODULE_DESCRIPTION("ADP5588/87 Keypad driver");
-MODULE_ALIAS("platform:adp5588-keys");
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 33d0bdc..323bcdf 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -35,7 +35,7 @@
 #include <linux/mutex.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/keypad.h>
 #include <plat/menelaus.h>
 #include <asm/irq.h>
diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c
index b09c7d1..ab86051 100644
--- a/drivers/input/misc/cm109.c
+++ b/drivers/input/misc/cm109.c
@@ -475,7 +475,7 @@
 				le16_to_cpu(dev->ctl_req->wIndex),
 				dev->ctl_data,
 				USB_PKT_LEN, USB_CTRL_SET_TIMEOUT);
-	if (error && error != EINTR)
+	if (error < 0 && error != -EINTR)
 		err("%s: usb_control_msg() failed %d", __func__, error);
 }
 
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index da28018..5ec617e 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -67,6 +67,10 @@
 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI	0x0245
 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO	0x0246
 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS	0x0247
+/* MacbookAir4,1 (unibody, July 2011) */
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI	0x0249
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO	0x024a
+#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS	0x024b
 /* MacbookAir4,2 (unibody, July 2011) */
 #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI	0x024c
 #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO	0x024d
@@ -112,6 +116,10 @@
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS),
+	/* MacbookAir4,1 */
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO),
+	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS),
 	/* MacbookAir4,2 */
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI),
 	BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO),
@@ -334,6 +342,18 @@
 		{ DIM_X, DIM_X / SN_COORD, -4750, 5280 },
 		{ DIM_Y, DIM_Y / SN_COORD, -150, 6730 }
 	},
+	{
+		USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI,
+		USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO,
+		USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS,
+		HAS_INTEGRATED_BUTTON,
+		0x84, sizeof(struct bt_data),
+		0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+		{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+		{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+		{ DIM_X, DIM_X / SN_COORD, -4620, 5140 },
+		{ DIM_Y, DIM_Y / SN_COORD, -150, 6600 }
+	},
 	{}
 };
 
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index d27c9d9..958b4eb 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -229,13 +229,6 @@
 							get_unaligned_le16(&report[i + 3]);
 						i += 4;
 					}
-				} else if (usage == WCM_DIGITIZER) {
-					/* max pressure isn't reported
-					features->pressure_max = (unsigned short)
-							(report[i+4] << 8  | report[i + 3]);
-					*/
-					features->pressure_max = 255;
-					i += 4;
 				}
 				break;
 
@@ -291,13 +284,6 @@
 				pen = 1;
 				i++;
 				break;
-
-			case HID_USAGE_UNDEFINED:
-				if (usage == WCM_DESKTOP && finger) /* capacity */
-					features->pressure_max =
-						get_unaligned_le16(&report[i + 3]);
-				i += 4;
-				break;
 			}
 			break;
 
diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c
index c1c2f7b..0dc97ec 100644
--- a/drivers/input/tablet/wacom_wac.c
+++ b/drivers/input/tablet/wacom_wac.c
@@ -800,25 +800,26 @@
 	int i;
 
 	for (i = 0; i < 2; i++) {
-		int p = data[9 * i + 2];
-		bool touch = p && !wacom->shared->stylus_in_proximity;
+		int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
+		bool touch = data[offset + 3] & 0x80;
 
-		input_mt_slot(input, i);
-		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		/*
 		 * Touch events need to be disabled while stylus is
 		 * in proximity because user's hand is resting on touchpad
 		 * and sending unwanted events.  User expects tablet buttons
 		 * to continue working though.
 		 */
+		touch = touch && !wacom->shared->stylus_in_proximity;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
 		if (touch) {
-			int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff;
-			int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff;
+			int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
+			int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
 			if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
 				x <<= 5;
 				y <<= 5;
 			}
-			input_report_abs(input, ABS_MT_PRESSURE, p);
 			input_report_abs(input, ABS_MT_POSITION_X, x);
 			input_report_abs(input, ABS_MT_POSITION_Y, y);
 		}
@@ -1056,10 +1057,11 @@
 			     features->x_fuzz, 0);
 	input_set_abs_params(input_dev, ABS_Y, 0, features->y_max,
 			     features->y_fuzz, 0);
-	input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
-			     features->pressure_fuzz, 0);
 
 	if (features->device_type == BTN_TOOL_PEN) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max,
+			     features->pressure_fuzz, 0);
+
 		/* penabled devices have fixed resolution for each model */
 		input_abs_set_res(input_dev, ABS_X, features->x_resolution);
 		input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
@@ -1098,6 +1100,8 @@
 		__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
 		__set_bit(BTN_STYLUS, input_dev->keybit);
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
 	case WACOM_21UX2:
@@ -1126,6 +1130,9 @@
 		}
 
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
+
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
 		wacom_setup_cintiq(wacom_wac);
 		break;
 
@@ -1150,6 +1157,8 @@
 		/* fall through */
 
 	case INTUOS:
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
 		wacom_setup_intuos(wacom_wac);
 		break;
 
@@ -1165,6 +1174,8 @@
 
 		input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
 		wacom_setup_intuos(wacom_wac);
+
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
 	case TABLETPC2FG:
@@ -1183,26 +1194,40 @@
 	case TABLETPC:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+
 		if (features->device_type != BTN_TOOL_PEN)
 			break;  /* no need to process stylus stuff */
 
 		/* fall through */
 
 	case PL:
-	case PTU:
 	case DTU:
 		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
 		__set_bit(BTN_STYLUS, input_dev->keybit);
 		__set_bit(BTN_STYLUS2, input_dev->keybit);
+
+		__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
+		break;
+
+	case PTU:
+		__set_bit(BTN_STYLUS2, input_dev->keybit);
 		/* fall through */
 
 	case PENPARTNER:
+		__set_bit(BTN_TOOL_PEN, input_dev->keybit);
 		__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
+		__set_bit(BTN_STYLUS, input_dev->keybit);
+
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
 		break;
 
 	case BAMBOO_PT:
 		__clear_bit(ABS_MISC, input_dev->absbit);
 
+		__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
+
 		if (features->device_type == BTN_TOOL_DOUBLETAP) {
 			__set_bit(BTN_LEFT, input_dev->keybit);
 			__set_bit(BTN_FORWARD, input_dev->keybit);
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
index c14412e..9941d39 100644
--- a/drivers/input/touchscreen/wacom_w8001.c
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -383,6 +383,8 @@
 	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
 	strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
 
+	__set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
 	/* penabled? */
 	error = w8001_command(w8001, W8001_CMD_QUERY, true);
 	if (!error) {
diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c
index 3dc9bef..6dcc7e2 100644
--- a/drivers/iommu/dmar.c
+++ b/drivers/iommu/dmar.c
@@ -1388,7 +1388,7 @@
 		return ret;
 	}
 
-	ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu);
+	ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu);
 	if (ret)
 		printk(KERN_ERR "IOMMU: can't request irq\n");
 	return ret;
diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c
index d87c9d0..328c64c 100644
--- a/drivers/leds/ledtrig-timer.c
+++ b/drivers/leds/ledtrig-timer.c
@@ -41,6 +41,7 @@
 
 	if (count == size) {
 		led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off);
+		led_cdev->blink_delay_on = state;
 		ret = count;
 	}
 
@@ -69,6 +70,7 @@
 
 	if (count == size) {
 		led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state);
+		led_cdev->blink_delay_off = state;
 		ret = count;
 	}
 
diff --git a/drivers/media/video/omap/omap_vout.c b/drivers/media/video/omap/omap_vout.c
index b5ef362..b3a5ecd 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -2194,19 +2194,6 @@
 					"'%s' Display already enabled\n",
 					def_display->name);
 			}
-			/* set the update mode */
-			if (def_display->caps &
-					OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE) {
-				if (dssdrv->enable_te)
-					dssdrv->enable_te(def_display, 0);
-				if (dssdrv->set_update_mode)
-					dssdrv->set_update_mode(def_display,
-							OMAP_DSS_UPDATE_MANUAL);
-			} else {
-				if (dssdrv->set_update_mode)
-					dssdrv->set_update_mode(def_display,
-							OMAP_DSS_UPDATE_AUTO);
-			}
 		}
 	}
 
diff --git a/drivers/media/video/omap3isp/ispccdc.c b/drivers/media/video/omap3isp/ispccdc.c
index 9d3459d..80796eb 100644
--- a/drivers/media/video/omap3isp/ispccdc.c
+++ b/drivers/media/video/omap3isp/ispccdc.c
@@ -31,6 +31,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/mm.h>
 #include <linux/sched.h>
+#include <linux/slab.h>
 #include <media/v4l2-event.h>
 
 #include "isp.h"
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index d29f9c2..e4100b1 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1961,7 +1961,7 @@
 
 	list_for_each_entry(stream, &dev->streams, list) {
 		if (stream->intf == intf)
-			return uvc_video_resume(stream);
+			return uvc_video_resume(stream, reset);
 	}
 
 	uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB interface "
diff --git a/drivers/media/video/uvc/uvc_entity.c b/drivers/media/video/uvc/uvc_entity.c
index 48fea37..29e2399 100644
--- a/drivers/media/video/uvc/uvc_entity.c
+++ b/drivers/media/video/uvc/uvc_entity.c
@@ -49,7 +49,7 @@
 		if (remote == NULL)
 			return -EINVAL;
 
-		source = (UVC_ENTITY_TYPE(remote) != UVC_TT_STREAMING)
+		source = (UVC_ENTITY_TYPE(remote) == UVC_TT_STREAMING)
 		       ? (remote->vdev ? &remote->vdev->entity : NULL)
 		       : &remote->subdev.entity;
 		if (source == NULL)
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index 8244167..ffd1158 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -1104,10 +1104,18 @@
  * buffers, making sure userspace applications are notified of the problem
  * instead of waiting forever.
  */
-int uvc_video_resume(struct uvc_streaming *stream)
+int uvc_video_resume(struct uvc_streaming *stream, int reset)
 {
 	int ret;
 
+	/* If the bus has been reset on resume, set the alternate setting to 0.
+	 * This should be the default value, but some devices crash or otherwise
+	 * misbehave if they don't receive a SET_INTERFACE request before any
+	 * other video control request.
+	 */
+	if (reset)
+		usb_set_interface(stream->dev->udev, stream->intfnum, 0);
+
 	stream->frozen = 0;
 
 	ret = uvc_commit_video(stream, &stream->ctrl);
diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h
index df32a43..cbdd49b 100644
--- a/drivers/media/video/uvc/uvcvideo.h
+++ b/drivers/media/video/uvc/uvcvideo.h
@@ -638,7 +638,7 @@
 /* Video */
 extern int uvc_video_init(struct uvc_streaming *stream);
 extern int uvc_video_suspend(struct uvc_streaming *stream);
-extern int uvc_video_resume(struct uvc_streaming *stream);
+extern int uvc_video_resume(struct uvc_streaming *stream, int reset);
 extern int uvc_video_enable(struct uvc_streaming *stream, int enable);
 extern int uvc_probe_video(struct uvc_streaming *stream,
 		struct uvc_streaming_control *probe);
diff --git a/drivers/media/video/v4l2-dev.c b/drivers/media/video/v4l2-dev.c
index 06f1400..d721565 100644
--- a/drivers/media/video/v4l2-dev.c
+++ b/drivers/media/video/v4l2-dev.c
@@ -173,6 +173,17 @@
 		media_device_unregister_entity(&vdev->entity);
 #endif
 
+	/* Do not call v4l2_device_put if there is no release callback set.
+	 * Drivers that have no v4l2_device release callback might free the
+	 * v4l2_dev instance in the video_device release callback below, so we
+	 * must perform this check here.
+	 *
+	 * TODO: In the long run all drivers that use v4l2_device should use the
+	 * v4l2_device release callback. This check will then be unnecessary.
+	 */
+	if (v4l2_dev->release == NULL)
+		v4l2_dev = NULL;
+
 	/* Release video_device and perform other
 	   cleanups as needed. */
 	vdev->release(vdev);
diff --git a/drivers/media/video/v4l2-device.c b/drivers/media/video/v4l2-device.c
index c72856c..e6a2c3b 100644
--- a/drivers/media/video/v4l2-device.c
+++ b/drivers/media/video/v4l2-device.c
@@ -38,6 +38,7 @@
 	mutex_init(&v4l2_dev->ioctl_lock);
 	v4l2_prio_init(&v4l2_dev->prio);
 	kref_init(&v4l2_dev->ref);
+	get_device(dev);
 	v4l2_dev->dev = dev;
 	if (dev == NULL) {
 		/* If dev == NULL, then name must be filled in by the caller */
@@ -93,6 +94,7 @@
 
 	if (dev_get_drvdata(v4l2_dev->dev) == v4l2_dev)
 		dev_set_drvdata(v4l2_dev->dev, NULL);
+	put_device(v4l2_dev->dev);
 	v4l2_dev->dev = NULL;
 }
 EXPORT_SYMBOL_GPL(v4l2_device_disconnect);
diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c
index 21131c7..563654c 100644
--- a/drivers/mfd/jz4740-adc.c
+++ b/drivers/mfd/jz4740-adc.c
@@ -273,7 +273,7 @@
 	ct->regs.ack = JZ_REG_ADC_STATUS;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 
 	irq_setup_generic_chip(gc, IRQ_MSK(5), 0, 0, IRQ_NOPROBE | IRQ_LEVEL);
 
diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c
index 5d1fca0..f83103b 100644
--- a/drivers/mfd/max8997.c
+++ b/drivers/mfd/max8997.c
@@ -135,10 +135,13 @@
 	max8997->dev = &i2c->dev;
 	max8997->i2c = i2c;
 	max8997->type = id->driver_data;
+	max8997->irq = i2c->irq;
 
 	if (!pdata)
 		goto err;
 
+	max8997->irq_base = pdata->irq_base;
+	max8997->ono = pdata->ono;
 	max8997->wakeup = pdata->wakeup;
 
 	mutex_init(&max8997->iolock);
@@ -152,6 +155,8 @@
 
 	pm_runtime_set_active(max8997->dev);
 
+	max8997_irq_init(max8997);
+
 	mfd_add_devices(max8997->dev, -1, max8997_devs,
 			ARRAY_SIZE(max8997_devs),
 			NULL, 0);
diff --git a/drivers/mfd/menelaus.c b/drivers/mfd/menelaus.c
index 9cee8e7..af5d9d0 100644
--- a/drivers/mfd/menelaus.c
+++ b/drivers/mfd/menelaus.c
@@ -44,7 +44,7 @@
 
 #include <asm/mach/irq.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/menelaus.h>
 
 #define DRIVER_NAME			"menelaus"
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 29601e7..86e1458 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -676,7 +677,6 @@
 				| OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
 				| OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE);
 
-			reg |= (1 << (i + 1));
 		} else
 			continue;
 
diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c
index 2bfad5c..a56be93 100644
--- a/drivers/mfd/tps65910-irq.c
+++ b/drivers/mfd/tps65910-irq.c
@@ -178,8 +178,10 @@
 	switch (tps65910_chip_id(tps65910)) {
 	case TPS65910:
 		tps65910->irq_num = TPS65910_NUM_IRQ;
+		break;
 	case TPS65911:
 		tps65910->irq_num = TPS65911_NUM_IRQ;
+		break;
 	}
 
 	/* Register with genirq */
diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index b5d598c..7cbf2aa 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -510,8 +510,9 @@
 	u8 ch_msb, ch_lsb;
 	int ret;
 
-	if (!req)
+	if (!req || !twl4030_madc)
 		return -EINVAL;
+
 	mutex_lock(&twl4030_madc->lock);
 	if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) {
 		ret = -EINVAL;
@@ -706,6 +707,8 @@
 	if (!madc)
 		return -ENOMEM;
 
+	madc->dev = &pdev->dev;
+
 	/*
 	 * Phoenix provides 2 interrupt lines. The first one is connected to
 	 * the OMAP. The other one can be connected to the other processor such
diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c
index ebf99be..d584f6b 100644
--- a/drivers/mfd/wm8350-gpio.c
+++ b/drivers/mfd/wm8350-gpio.c
@@ -37,7 +37,7 @@
 	return ret;
 }
 
-static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
+static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db)
 {
 	if (db == WM8350_GPIO_DEBOUNCE_ON)
 		return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE,
@@ -210,7 +210,7 @@
 		goto err;
 	if (gpio_set_polarity(wm8350, gpio, pol))
 		goto err;
-	if (gpio_set_debounce(wm8350, gpio, debounce))
+	if (wm8350_gpio_set_debounce(wm8350, gpio, debounce))
 		goto err;
 	if (gpio_set_dir(wm8350, gpio, dir))
 		goto err;
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index b928bc1..8b51cd6 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -375,12 +375,14 @@
 	 *      both have been read. So the value read will always be correct.
 	 * Set BOOT bit to refresh factory tuning values.
 	 */
-	lis3->read(lis3, CTRL_REG2, &reg);
-	if (lis3->whoami ==  WAI_12B)
-		reg |= CTRL2_BDU | CTRL2_BOOT;
-	else
-		reg |= CTRL2_BOOT_8B;
-	lis3->write(lis3, CTRL_REG2, reg);
+	if (lis3->pdata) {
+		lis3->read(lis3, CTRL_REG2, &reg);
+		if (lis3->whoami ==  WAI_12B)
+			reg |= CTRL2_BDU | CTRL2_BOOT;
+		else
+			reg |= CTRL2_BOOT_8B;
+		lis3->write(lis3, CTRL_REG2, reg);
+	}
 
 	/* LIS3 power on delay is quite long */
 	msleep(lis3->pwron_delay / lis3lv02d_get_odr());
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index 06df187..0b56e3f 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -165,6 +165,11 @@
 static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc,
 					     const char *thread_name)
 {
+	/*
+	 * Since we access the comm member in current's task_struct, we only
+	 * need to be as large as what 'comm' in that structure is.
+	 */
+	char comm[TASK_COMM_LEN];
 	struct pti_masterchannel mccontrol = {.master = CONTROL_ID,
 					      .channel = 0};
 	const char *thread_name_p;
@@ -172,13 +177,6 @@
 	u8 control_frame[CONTROL_FRAME_LEN];
 
 	if (!thread_name) {
-		/*
-		 * Since we access the comm member in current's task_struct,
-		 * we only need to be as large as what 'comm' in that
-		 * structure is.
-		 */
-		char comm[TASK_COMM_LEN];
-
 		if (!in_interrupt())
 			get_task_comm(comm, current);
 		else
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 1ff5486..4c1a648 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -926,6 +926,9 @@
 	/*
 	 * Reliable writes are used to implement Forced Unit Access and
 	 * REQ_META accesses, and are supported only on MMCs.
+	 *
+	 * XXX: this really needs a good explanation of why REQ_META
+	 * is treated special.
 	 */
 	bool do_rel_wr = ((req->cmd_flags & REQ_FUA) ||
 			  (req->cmd_flags & REQ_META)) &&
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index a6c3290..2dba999 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -33,7 +33,7 @@
 
 #include <plat/board.h>
 #include <plat/mmc.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/dma.h>
 #include <plat/mux.h>
 #include <plat/fpga.h>
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index 18b0bd3..21b00ce 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -21,7 +21,9 @@
 #include <linux/mmc/card.h>
 #include <linux/mmc/host.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
+
+#include <mach/gpio-tegra.h>
 #include <mach/sdhci.h>
 
 #include "sdhci-pltfm.h"
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
index 78017eb..9e6b498 100644
--- a/drivers/mtd/nand/ams-delta.c
+++ b/drivers/mtd/nand/ams-delta.c
@@ -26,7 +26,7 @@
 #include <asm/io.h>
 #include <mach/hardware.h>
 #include <asm/sizes.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/board-ams-delta.h>
 
 /*
diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c
index a916dec..6a1d6d9 100644
--- a/drivers/mtd/onenand/omap2.c
+++ b/drivers/mtd/onenand/omap2.c
@@ -40,7 +40,7 @@
 #include <asm/mach/flash.h>
 #include <plat/gpmc.h>
 #include <plat/onenand.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include <plat/dma.h>
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8d0314d..a44874e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2535,7 +2535,7 @@
 source "drivers/net/stmmac/Kconfig"
 
 config PCH_GBE
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE"
+	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE"
 	depends on PCI
 	select MII
 	---help---
@@ -2548,10 +2548,11 @@
 	  This driver enables Gigabit Ethernet function.
 
 	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7223.
-	  ML7223 IOH is for MP(Media Phone) use.
-	  ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7223 is completely compatible for Intel EG20T PCH.
+	  Output Hub), ML7223/ML7831.
+	  ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general
+	  purpose use.
+	  ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config FTGMAC100
 	tristate "Faraday FTGMAC100 Gigabit Ethernet support"
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 29dc435..48b4ec1 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -35,7 +35,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/at91rm9200_emac.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/board.h>
 
 #include "at91_ether.h"
diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index c423504..e46df53 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -315,6 +315,14 @@
 	u32		raw;
 };
 
+/* dropless fc FW/HW related params */
+#define BRB_SIZE(bp)		(CHIP_IS_E3(bp) ? 1024 : 512)
+#define MAX_AGG_QS(bp)		(CHIP_IS_E1(bp) ? \
+					ETH_MAX_AGGREGATION_QUEUES_E1 :\
+					ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
+#define FW_DROP_LEVEL(bp)	(3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp))
+#define FW_PREFETCH_CNT		16
+#define DROPLESS_FC_HEADROOM	100
 
 /* MC hsi */
 #define BCM_PAGE_SHIFT		12
@@ -331,15 +339,35 @@
 /* SGE ring related macros */
 #define NUM_RX_SGE_PAGES	2
 #define RX_SGE_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_sge))
-#define MAX_RX_SGE_CNT		(RX_SGE_CNT - 2)
+#define NEXT_PAGE_SGE_DESC_CNT	2
+#define MAX_RX_SGE_CNT		(RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT)
 /* RX_SGE_CNT is promised to be a power of 2 */
 #define RX_SGE_MASK		(RX_SGE_CNT - 1)
 #define NUM_RX_SGE		(RX_SGE_CNT * NUM_RX_SGE_PAGES)
 #define MAX_RX_SGE		(NUM_RX_SGE - 1)
 #define NEXT_SGE_IDX(x)		((((x) & RX_SGE_MASK) == \
-				  (MAX_RX_SGE_CNT - 1)) ? (x) + 3 : (x) + 1)
+				  (MAX_RX_SGE_CNT - 1)) ? \
+					(x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \
+					(x) + 1)
 #define RX_SGE(x)		((x) & MAX_RX_SGE)
 
+/*
+ * Number of required  SGEs is the sum of two:
+ * 1. Number of possible opened aggregations (next packet for
+ *    these aggregations will probably consume SGE immidiatelly)
+ * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only
+ *    after placement on BD for new TPA aggregation)
+ *
+ * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page
+ */
+#define NUM_SGE_REQ		(MAX_AGG_QS(bp) + \
+					(BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2)
+#define NUM_SGE_PG_REQ		((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \
+						MAX_RX_SGE_CNT)
+#define SGE_TH_LO(bp)		(NUM_SGE_REQ + \
+				 NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT)
+#define SGE_TH_HI(bp)		(SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
 /* Manipulate a bit vector defined as an array of u64 */
 
 /* Number of bits in one sge_mask array element */
@@ -551,24 +579,43 @@
 
 #define NUM_TX_RINGS		16
 #define TX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types))
-#define MAX_TX_DESC_CNT		(TX_DESC_CNT - 1)
+#define NEXT_PAGE_TX_DESC_CNT	1
+#define MAX_TX_DESC_CNT		(TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT)
 #define NUM_TX_BD		(TX_DESC_CNT * NUM_TX_RINGS)
 #define MAX_TX_BD		(NUM_TX_BD - 1)
 #define MAX_TX_AVAIL		(MAX_TX_DESC_CNT * NUM_TX_RINGS - 2)
 #define NEXT_TX_IDX(x)		((((x) & MAX_TX_DESC_CNT) == \
-				  (MAX_TX_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+				  (MAX_TX_DESC_CNT - 1)) ? \
+					(x) + 1 + NEXT_PAGE_TX_DESC_CNT : \
+					(x) + 1)
 #define TX_BD(x)		((x) & MAX_TX_BD)
 #define TX_BD_POFF(x)		((x) & MAX_TX_DESC_CNT)
 
 /* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */
 #define NUM_RX_RINGS		8
 #define RX_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_rx_bd))
-#define MAX_RX_DESC_CNT		(RX_DESC_CNT - 2)
+#define NEXT_PAGE_RX_DESC_CNT	2
+#define MAX_RX_DESC_CNT		(RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT)
 #define RX_DESC_MASK		(RX_DESC_CNT - 1)
 #define NUM_RX_BD		(RX_DESC_CNT * NUM_RX_RINGS)
 #define MAX_RX_BD		(NUM_RX_BD - 1)
 #define MAX_RX_AVAIL		(MAX_RX_DESC_CNT * NUM_RX_RINGS - 2)
-#define MIN_RX_AVAIL		128
+
+/* dropless fc calculations for BDs
+ *
+ * Number of BDs should as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_BD_REQ		BRB_SIZE(bp)
+#define NUM_BD_PG_REQ		((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \
+					      MAX_RX_DESC_CNT)
+#define BD_TH_LO(bp)		(NUM_BD_REQ + \
+				 NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \
+				 FW_DROP_LEVEL(bp))
+#define BD_TH_HI(bp)		(BD_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
+#define MIN_RX_AVAIL		((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128)
 
 #define MIN_RX_SIZE_TPA_HW	(CHIP_IS_E1(bp) ? \
 					ETH_MIN_RX_CQES_WITH_TPA_E1 : \
@@ -579,7 +626,9 @@
 								MIN_RX_AVAIL))
 
 #define NEXT_RX_IDX(x)		((((x) & RX_DESC_MASK) == \
-				  (MAX_RX_DESC_CNT - 1)) ? (x) + 3 : (x) + 1)
+				  (MAX_RX_DESC_CNT - 1)) ? \
+					(x) + 1 + NEXT_PAGE_RX_DESC_CNT : \
+					(x) + 1)
 #define RX_BD(x)		((x) & MAX_RX_BD)
 
 /*
@@ -589,14 +638,31 @@
 #define CQE_BD_REL	(sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
 #define NUM_RCQ_RINGS		(NUM_RX_RINGS * CQE_BD_REL)
 #define RCQ_DESC_CNT		(BCM_PAGE_SIZE / sizeof(union eth_rx_cqe))
-#define MAX_RCQ_DESC_CNT	(RCQ_DESC_CNT - 1)
+#define NEXT_PAGE_RCQ_DESC_CNT	1
+#define MAX_RCQ_DESC_CNT	(RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT)
 #define NUM_RCQ_BD		(RCQ_DESC_CNT * NUM_RCQ_RINGS)
 #define MAX_RCQ_BD		(NUM_RCQ_BD - 1)
 #define MAX_RCQ_AVAIL		(MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2)
 #define NEXT_RCQ_IDX(x)		((((x) & MAX_RCQ_DESC_CNT) == \
-				  (MAX_RCQ_DESC_CNT - 1)) ? (x) + 2 : (x) + 1)
+				  (MAX_RCQ_DESC_CNT - 1)) ? \
+					(x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \
+					(x) + 1)
 #define RCQ_BD(x)		((x) & MAX_RCQ_BD)
 
+/* dropless fc calculations for RCQs
+ *
+ * Number of RCQs should be as number of buffers in BRB:
+ * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT
+ * "next" elements on each page
+ */
+#define NUM_RCQ_REQ		BRB_SIZE(bp)
+#define NUM_RCQ_PG_REQ		((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \
+					      MAX_RCQ_DESC_CNT)
+#define RCQ_TH_LO(bp)		(NUM_RCQ_REQ + \
+				 NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \
+				 FW_DROP_LEVEL(bp))
+#define RCQ_TH_HI(bp)		(RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM)
+
 
 /* This is needed for determining of last_max */
 #define SUB_S16(a, b)		(s16)((s16)(a) - (s16)(b))
@@ -685,25 +751,18 @@
 #define FP_CSB_FUNC_OFF	\
 			offsetof(struct cstorm_status_block_c, func)
 
-#define HC_INDEX_TOE_RX_CQ_CONS		0 /* Formerly Ustorm TOE CQ index */
-					  /* (HC_INDEX_U_TOE_RX_CQ_CONS)  */
-#define HC_INDEX_ETH_RX_CQ_CONS		1 /* Formerly Ustorm ETH CQ index */
-					  /* (HC_INDEX_U_ETH_RX_CQ_CONS)  */
-#define HC_INDEX_ETH_RX_BD_CONS		2 /* Formerly Ustorm ETH BD index */
-					  /* (HC_INDEX_U_ETH_RX_BD_CONS)  */
+#define HC_INDEX_ETH_RX_CQ_CONS		1
 
-#define HC_INDEX_TOE_TX_CQ_CONS		4 /* Formerly Cstorm TOE CQ index   */
-					  /* (HC_INDEX_C_TOE_TX_CQ_CONS)    */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS0	5 /* Formerly Cstorm ETH CQ index   */
-					  /* (HC_INDEX_C_ETH_TX_CQ_CONS)    */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS1	6 /* Formerly Cstorm ETH CQ index   */
-					  /* (HC_INDEX_C_ETH_TX_CQ_CONS)    */
-#define HC_INDEX_ETH_TX_CQ_CONS_COS2	7 /* Formerly Cstorm ETH CQ index   */
-					  /* (HC_INDEX_C_ETH_TX_CQ_CONS)    */
+#define HC_INDEX_OOO_TX_CQ_CONS		4
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS0	5
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS1	6
+
+#define HC_INDEX_ETH_TX_CQ_CONS_COS2	7
 
 #define HC_INDEX_ETH_FIRST_TX_CQ_CONS	HC_INDEX_ETH_TX_CQ_CONS_COS0
 
-
 #define BNX2X_RX_SB_INDEX \
 	(&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS])
 
@@ -1100,11 +1159,12 @@
 #define BP_PORT(bp)			(bp->pfid & 1)
 #define BP_FUNC(bp)			(bp->pfid)
 #define BP_ABS_FUNC(bp)			(bp->pf_num)
-#define BP_E1HVN(bp)			(bp->pfid >> 1)
-#define BP_VN(bp)			(BP_E1HVN(bp)) /*remove when approved*/
-#define BP_L_ID(bp)			(BP_E1HVN(bp) << 2)
-#define BP_FW_MB_IDX(bp)		(BP_PORT(bp) +\
-	  BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2  : 1))
+#define BP_VN(bp)			((bp)->pfid >> 1)
+#define BP_MAX_VN_NUM(bp)		(CHIP_MODE_IS_4_PORT(bp) ? 2 : 4)
+#define BP_L_ID(bp)			(BP_VN(bp) << 2)
+#define BP_FW_MB_IDX_VN(bp, vn)		(BP_PORT(bp) +\
+	  (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2  : 1))
+#define BP_FW_MB_IDX(bp)		BP_FW_MB_IDX_VN(bp, BP_VN(bp))
 
 	struct net_device	*dev;
 	struct pci_dev		*pdev;
@@ -1767,7 +1827,7 @@
 
 #define MAX_DMAE_C_PER_PORT		8
 #define INIT_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
-					 BP_E1HVN(bp))
+					 BP_VN(bp))
 #define PMF_DMAE_C(bp)			(BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \
 					 E1HVN_MAX)
 
@@ -1793,7 +1853,7 @@
 
 /* must be used on a CID before placing it on a HW ring */
 #define HW_CID(bp, x)			((BP_PORT(bp) << 23) | \
-					 (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \
+					 (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \
 					 (x))
 
 #define SP_DESC_CNT		(BCM_PAGE_SIZE / sizeof(struct eth_spe))
diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c
index 37e5790..c4cbf97 100644
--- a/drivers/net/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/bnx2x/bnx2x_cmn.c
@@ -987,8 +987,6 @@
 void bnx2x_init_rx_rings(struct bnx2x *bp)
 {
 	int func = BP_FUNC(bp);
-	int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
-					      ETH_MAX_AGGREGATION_QUEUES_E1H_E2;
 	u16 ring_prod;
 	int i, j;
 
@@ -1001,7 +999,7 @@
 
 		if (!fp->disable_tpa) {
 			/* Fill the per-aggregtion pool */
-			for (i = 0; i < max_agg_queues; i++) {
+			for (i = 0; i < MAX_AGG_QS(bp); i++) {
 				struct bnx2x_agg_info *tpa_info =
 					&fp->tpa_info[i];
 				struct sw_rx_bd *first_buf =
@@ -1041,7 +1039,7 @@
 					bnx2x_free_rx_sge_range(bp, fp,
 								ring_prod);
 					bnx2x_free_tpa_pool(bp, fp,
-							    max_agg_queues);
+							    MAX_AGG_QS(bp));
 					fp->disable_tpa = 1;
 					ring_prod = 0;
 					break;
@@ -1137,9 +1135,7 @@
 		bnx2x_free_rx_bds(fp);
 
 		if (!fp->disable_tpa)
-			bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ?
-					    ETH_MAX_AGGREGATION_QUEUES_E1 :
-					    ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+			bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp));
 	}
 }
 
@@ -3095,15 +3091,20 @@
 	struct bnx2x_fastpath *fp = &bp->fp[index];
 	int ring_size = 0;
 	u8 cos;
+	int rx_ring_size = 0;
 
 	/* if rx_ring_size specified - use it */
-	int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size :
-			   MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+	if (!bp->rx_ring_size) {
 
-	/* allocate at least number of buffers required by FW */
-	rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
-						    MIN_RX_SIZE_TPA,
-				  rx_ring_size);
+		rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp);
+
+		/* allocate at least number of buffers required by FW */
+		rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA :
+				     MIN_RX_SIZE_TPA, rx_ring_size);
+
+		bp->rx_ring_size = rx_ring_size;
+	} else
+		rx_ring_size = bp->rx_ring_size;
 
 	/* Common */
 	sb = &bnx2x_fp(bp, index, status_blk);
diff --git a/drivers/net/bnx2x/bnx2x_dcb.c b/drivers/net/bnx2x/bnx2x_dcb.c
index a1e004a..0b4acf6 100644
--- a/drivers/net/bnx2x/bnx2x_dcb.c
+++ b/drivers/net/bnx2x/bnx2x_dcb.c
@@ -2120,6 +2120,7 @@
 			break;
 		case DCB_CAP_ATTR_DCBX:
 			*cap = BNX2X_DCBX_CAPS;
+			break;
 		default:
 			rval = -EINVAL;
 			break;
diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c
index 2218630..cf3e479 100644
--- a/drivers/net/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/bnx2x/bnx2x_ethtool.c
@@ -363,13 +363,50 @@
 		}
 
 		/* advertise the requested speed and duplex if supported */
-		cmd->advertising &= bp->port.supported[cfg_idx];
+		if (cmd->advertising & ~(bp->port.supported[cfg_idx])) {
+			DP(NETIF_MSG_LINK, "Advertisement parameters "
+					   "are not supported\n");
+			return -EINVAL;
+		}
 
 		bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG;
-		bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL;
-		bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg |
+		bp->link_params.req_duplex[cfg_idx] = cmd->duplex;
+		bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg |
 					 cmd->advertising);
+		if (cmd->advertising) {
 
+			bp->link_params.speed_cap_mask[cfg_idx] = 0;
+			if (cmd->advertising & ADVERTISED_10baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF;
+			}
+			if (cmd->advertising & ADVERTISED_10baseT_Full)
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL;
+
+			if (cmd->advertising & ADVERTISED_100baseT_Full)
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL;
+
+			if (cmd->advertising & ADVERTISED_100baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+				     PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF;
+			}
+			if (cmd->advertising & ADVERTISED_1000baseT_Half) {
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+			}
+			if (cmd->advertising & (ADVERTISED_1000baseT_Full |
+						ADVERTISED_1000baseKX_Full))
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_1G;
+
+			if (cmd->advertising & (ADVERTISED_10000baseT_Full |
+						ADVERTISED_10000baseKX4_Full |
+						ADVERTISED_10000baseKR_Full))
+				bp->link_params.speed_cap_mask[cfg_idx] |=
+					PORT_HW_CFG_SPEED_CAPABILITY_D0_10G;
+		}
 	} else { /* forced speed */
 		/* advertise the requested speed and duplex if supported */
 		switch (speed) {
@@ -1310,10 +1347,7 @@
 	if (bp->rx_ring_size)
 		ering->rx_pending = bp->rx_ring_size;
 	else
-		if (bp->state == BNX2X_STATE_OPEN && bp->num_queues)
-			ering->rx_pending = MAX_RX_AVAIL/bp->num_queues;
-		else
-			ering->rx_pending = MAX_RX_AVAIL;
+		ering->rx_pending = MAX_RX_AVAIL;
 
 	ering->rx_mini_pending = 0;
 	ering->rx_jumbo_pending = 0;
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index d45b155..ba15bdc 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -778,9 +778,9 @@
 {
 	u32 nig_reg_adress_crd_weight = 0;
 	u32 pbf_reg_adress_crd_weight = 0;
-	/* Calculate and set BW for this COS*/
-	const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw;
-	const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw;
+	/* Calculate and set BW for this COS - use 1 instead of 0 for BW */
+	const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw;
+	const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw;
 
 	switch (cos_entry) {
 	case 0:
@@ -852,18 +852,12 @@
 	/* Calculate total BW requested */
 	for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) {
 		if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) {
-
-			if (0 == ets_params->cos[cos_idx].params.bw_params.bw) {
-				DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW"
-						   "was set to 0\n");
-			return -EINVAL;
+			*total_bw +=
+				ets_params->cos[cos_idx].params.bw_params.bw;
 		}
-		*total_bw +=
-		    ets_params->cos[cos_idx].params.bw_params.bw;
-	    }
 	}
 
-	/*Check taotl BW is valid */
+	/* Check total BW is valid */
 	if ((100 != *total_bw) || (0 == *total_bw)) {
 		if (0 == *total_bw) {
 			DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW"
@@ -1726,7 +1720,7 @@
 
 	/* Check loopback mode */
 	if (lb)
-		val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK;
+		val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK;
 	REG_WR(bp, xmac_base + XMAC_REG_CTRL, val);
 	bnx2x_set_xumac_nig(params,
 			    ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1);
@@ -3630,6 +3624,12 @@
 	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
 			 MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16);
 
+	/* Advertised and set FEC (Forward Error Correction) */
+	bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD,
+			 MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2,
+			 (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY |
+			  MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ));
+
 	/* Enable CL37 BAM */
 	if (REG_RD(bp, params->shmem_base +
 		   offsetof(struct shmem_region, dev_info.
@@ -5924,7 +5924,7 @@
 					(tmp | EMAC_LED_OVERRIDE));
 				/*
 				 * return here without enabling traffic
-				 * LED blink andsetting rate in ON mode.
+				 * LED blink and setting rate in ON mode.
 				 * In oper mode, enabling LED blink
 				 * and setting rate is needed.
 				 */
@@ -5936,7 +5936,11 @@
 			 * This is a work-around for HW issue found when link
 			 * is up in CL73
 			 */
-			REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+			if ((!CHIP_IS_E3(bp)) ||
+			    (CHIP_IS_E3(bp) &&
+			     mode == LED_MODE_ON))
+				REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
+
 			if (CHIP_IS_E1x(bp) ||
 			    CHIP_IS_E2(bp) ||
 			    (mode == LED_MODE_ON))
@@ -10638,8 +10642,7 @@
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= (FLAGS_HW_LOCK_REQUIRED |
-			   FLAGS_TX_ERROR_CHECK),
+	.flags		= FLAGS_HW_LOCK_REQUIRED,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10765,8 +10768,7 @@
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= (FLAGS_INIT_XGXS_FIRST |
-			   FLAGS_TX_ERROR_CHECK),
+	.flags		= FLAGS_INIT_XGXS_FIRST,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10797,8 +10799,7 @@
 	.addr		= 0xff,
 	.def_md_devad	= 0,
 	.flags		= (FLAGS_HW_LOCK_REQUIRED |
-			   FLAGS_INIT_XGXS_FIRST |
-			   FLAGS_TX_ERROR_CHECK),
+			   FLAGS_INIT_XGXS_FIRST),
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
@@ -10829,8 +10830,7 @@
 	.type		= PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727,
 	.addr		= 0xff,
 	.def_md_devad	= 0,
-	.flags		= (FLAGS_FAN_FAILURE_DET_REQ |
-			   FLAGS_TX_ERROR_CHECK),
+	.flags		= FLAGS_FAN_FAILURE_DET_REQ,
 	.rx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.tx_preemphasis	= {0xffff, 0xffff, 0xffff, 0xffff},
 	.mdio_ctrl	= 0,
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index f74582a..15f8000 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -407,8 +407,8 @@
 	opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET);
 
 	opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0);
-	opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) |
-		   (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
+	opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) |
+		   (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT));
 	opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT);
 
 #ifdef __BIG_ENDIAN
@@ -1419,7 +1419,7 @@
 	if (!CHIP_IS_E1(bp)) {
 		/* init leading/trailing edge */
 		if (IS_MF(bp)) {
-			val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+			val = (0xee0f | (1 << (BP_VN(bp) + 4)));
 			if (bp->port.pmf)
 				/* enable nig and gpio3 attention */
 				val |= 0x1100;
@@ -1471,7 +1471,7 @@
 
 	/* init leading/trailing edge */
 	if (IS_MF(bp)) {
-		val = (0xee0f | (1 << (BP_E1HVN(bp) + 4)));
+		val = (0xee0f | (1 << (BP_VN(bp) + 4)));
 		if (bp->port.pmf)
 			/* enable nig and gpio3 attention */
 			val |= 0x1100;
@@ -2287,7 +2287,7 @@
 	int vn;
 
 	bp->vn_weight_sum = 0;
-	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+	for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
 		u32 vn_cfg = bp->mf_config[vn];
 		u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >>
 				   FUNC_MF_CFG_MIN_BW_SHIFT) * 100;
@@ -2320,12 +2320,18 @@
 					CMNG_FLAGS_PER_PORT_FAIRNESS_VN;
 }
 
+/* returns func by VN for current port */
+static inline int func_by_vn(struct bnx2x *bp, int vn)
+{
+	return 2 * vn + BP_PORT(bp);
+}
+
 static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn)
 {
 	struct rate_shaping_vars_per_vn m_rs_vn;
 	struct fairness_vars_per_vn m_fair_vn;
 	u32 vn_cfg = bp->mf_config[vn];
-	int func = 2*vn + BP_PORT(bp);
+	int func = func_by_vn(bp, vn);
 	u16 vn_min_rate, vn_max_rate;
 	int i;
 
@@ -2422,7 +2428,7 @@
 	 *
 	 *      and there are 2 functions per port
 	 */
-	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
+	for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
 		int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp);
 
 		if (func >= E1H_FUNC_MAX)
@@ -2454,7 +2460,7 @@
 
 		/* calculate and set min-max rate for each vn */
 		if (bp->port.pmf)
-			for (vn = VN_0; vn < E1HVN_MAX; vn++)
+			for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++)
 				bnx2x_init_vn_minmax(bp, vn);
 
 		/* always enable rate shaping and fairness */
@@ -2473,16 +2479,15 @@
 
 static inline void bnx2x_link_sync_notify(struct bnx2x *bp)
 {
-	int port = BP_PORT(bp);
 	int func;
 	int vn;
 
 	/* Set the attention towards other drivers on the same port */
-	for (vn = VN_0; vn < E1HVN_MAX; vn++) {
-		if (vn == BP_E1HVN(bp))
+	for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) {
+		if (vn == BP_VN(bp))
 			continue;
 
-		func = ((vn << 1) | port);
+		func = func_by_vn(bp, vn);
 		REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 +
 		       (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1);
 	}
@@ -2577,7 +2582,7 @@
 	bnx2x_dcbx_pmf_update(bp);
 
 	/* enable nig attention */
-	val = (0xff0f | (1 << (BP_E1HVN(bp) + 4)));
+	val = (0xff0f | (1 << (BP_VN(bp) + 4)));
 	if (bp->common.int_block == INT_BLOCK_HC) {
 		REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val);
 		REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val);
@@ -2756,8 +2761,14 @@
 	u16 tpa_agg_size = 0;
 
 	if (!fp->disable_tpa) {
-		pause->sge_th_hi = 250;
-		pause->sge_th_lo = 150;
+		pause->sge_th_lo = SGE_TH_LO(bp);
+		pause->sge_th_hi = SGE_TH_HI(bp);
+
+		/* validate SGE ring has enough to cross high threshold */
+		WARN_ON(bp->dropless_fc &&
+				pause->sge_th_hi + FW_PREFETCH_CNT >
+				MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES);
+
 		tpa_agg_size = min_t(u32,
 			(min_t(u32, 8, MAX_SKB_FRAGS) *
 			SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff);
@@ -2771,10 +2782,21 @@
 
 	/* pause - not for e1 */
 	if (!CHIP_IS_E1(bp)) {
-		pause->bd_th_hi = 350;
-		pause->bd_th_lo = 250;
-		pause->rcq_th_hi = 350;
-		pause->rcq_th_lo = 250;
+		pause->bd_th_lo = BD_TH_LO(bp);
+		pause->bd_th_hi = BD_TH_HI(bp);
+
+		pause->rcq_th_lo = RCQ_TH_LO(bp);
+		pause->rcq_th_hi = RCQ_TH_HI(bp);
+		/*
+		 * validate that rings have enough entries to cross
+		 * high thresholds
+		 */
+		WARN_ON(bp->dropless_fc &&
+				pause->bd_th_hi + FW_PREFETCH_CNT >
+				bp->rx_ring_size);
+		WARN_ON(bp->dropless_fc &&
+				pause->rcq_th_hi + FW_PREFETCH_CNT >
+				NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT);
 
 		pause->pri_map = 1;
 	}
@@ -2802,9 +2824,7 @@
 	 * For PF Clients it should be the maximum avaliable number.
 	 * VF driver(s) may want to define it to a smaller value.
 	 */
-	rxq_init->max_tpa_queues =
-		(CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 :
-		ETH_MAX_AGGREGATION_QUEUES_E1H_E2);
+	rxq_init->max_tpa_queues = MAX_AGG_QS(bp);
 
 	rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT;
 	rxq_init->fw_sb_id = fp->fw_sb_id;
@@ -4808,6 +4828,37 @@
 	hc_sm->time_to_expire = 0xFFFFFFFF;
 }
 
+
+/* allocates state machine ids. */
+static inline
+void bnx2x_map_sb_state_machines(struct hc_index_data *index_data)
+{
+	/* zero out state machine indices */
+	/* rx indices */
+	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+
+	/* tx indices */
+	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID;
+
+	/* map indices */
+	/* rx indices */
+	index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |=
+		SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+
+	/* tx indices */
+	index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |=
+		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |=
+		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |=
+		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+	index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |=
+		SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT;
+}
+
 static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid,
 			  u8 vf_valid, int fw_sb_id, int igu_sb_id)
 {
@@ -4839,6 +4890,7 @@
 		hc_sm_p = sb_data_e2.common.state_machine;
 		sb_data_p = (u32 *)&sb_data_e2;
 		data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32);
+		bnx2x_map_sb_state_machines(sb_data_e2.index_data);
 	} else {
 		memset(&sb_data_e1x, 0,
 		       sizeof(struct hc_status_block_data_e1x));
@@ -4853,6 +4905,7 @@
 		hc_sm_p = sb_data_e1x.common.state_machine;
 		sb_data_p = (u32 *)&sb_data_e1x;
 		data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32);
+		bnx2x_map_sb_state_machines(sb_data_e1x.index_data);
 	}
 
 	bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID],
@@ -4890,7 +4943,7 @@
 	int igu_seg_id;
 	int port = BP_PORT(bp);
 	int func = BP_FUNC(bp);
-	int reg_offset;
+	int reg_offset, reg_offset_en5;
 	u64 section;
 	int index;
 	struct hc_sp_status_block_data sp_sb_data;
@@ -4913,6 +4966,8 @@
 
 	reg_offset = (port ? MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0 :
 			     MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0);
+	reg_offset_en5 = (port ? MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0 :
+				 MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0);
 	for (index = 0; index < MAX_DYNAMIC_ATTN_GRPS; index++) {
 		int sindex;
 		/* take care of sig[0]..sig[4] */
@@ -4927,7 +4982,7 @@
 			 * and not 16 between the different groups
 			 */
 			bp->attn_group[index].sig[4] = REG_RD(bp,
-					reg_offset + 0x10 + 0x4*index);
+					reg_offset_en5 + 0x4*index);
 		else
 			bp->attn_group[index].sig[4] = 0;
 	}
@@ -5802,7 +5857,7 @@
 	 * take the UNDI lock to protect undi_unload flow from accessing
 	 * registers while we're resetting the chip
 	 */
-	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+	bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
 
 	bnx2x_reset_common(bp);
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff);
@@ -5814,7 +5869,7 @@
 	}
 	REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val);
 
-	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+	bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
 
 	bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON);
 
@@ -6671,12 +6726,16 @@
 			if (CHIP_MODE_IS_4_PORT(bp))
 				dsb_idx = BP_FUNC(bp);
 			else
-				dsb_idx = BP_E1HVN(bp);
+				dsb_idx = BP_VN(bp);
 
 			prod_offset = (CHIP_INT_MODE_IS_BC(bp) ?
 				       IGU_BC_BASE_DSB_PROD + dsb_idx :
 				       IGU_NORM_BASE_DSB_PROD + dsb_idx);
 
+			/*
+			 * igu prods come in chunks of E1HVN_MAX (4) -
+			 * does not matters what is the current chip mode
+			 */
 			for (i = 0; i < (num_segs * E1HVN_MAX);
 			     i += E1HVN_MAX) {
 				addr = IGU_REG_PROD_CONS_MEMORY +
@@ -7568,9 +7627,12 @@
 		u32 emac_base = port ? GRCBASE_EMAC1 : GRCBASE_EMAC0;
 		u8 *mac_addr = bp->dev->dev_addr;
 		u32 val;
+		u16 pmc;
+
 		/* The mac address is written to entries 1-4 to
-		   preserve entry 0 which is used by the PMF */
-		u8 entry = (BP_E1HVN(bp) + 1)*8;
+		 * preserve entry 0 which is used by the PMF
+		 */
+		u8 entry = (BP_VN(bp) + 1)*8;
 
 		val = (mac_addr[0] << 8) | mac_addr[1];
 		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val);
@@ -7579,6 +7641,11 @@
 		      (mac_addr[4] << 8) | mac_addr[5];
 		EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry + 4, val);
 
+		/* Enable the PME and clear the status */
+		pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmc);
+		pmc |= PCI_PM_CTRL_PME_ENABLE | PCI_PM_CTRL_PME_STATUS;
+		pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, pmc);
+
 		reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_EN;
 
 	} else
@@ -8546,10 +8613,12 @@
 	/* Check if there is any driver already loaded */
 	val = REG_RD(bp, MISC_REG_UNPREPARED);
 	if (val == 0x1) {
-		/* Check if it is the UNDI driver
+
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+		/*
+		 * Check if it is the UNDI driver
 		 * UNDI driver initializes CID offset for normal bell to 0x7
 		 */
-		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
 		val = REG_RD(bp, DORQ_REG_NORM_CID_OFST);
 		if (val == 0x7) {
 			u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS;
@@ -8587,9 +8656,6 @@
 				bnx2x_fw_command(bp, reset_code, 0);
 			}
 
-			/* now it's safe to release the lock */
-			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
-
 			bnx2x_undi_int_disable(bp);
 			port = BP_PORT(bp);
 
@@ -8639,8 +8705,10 @@
 			bp->fw_seq =
 			      (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) &
 				DRV_MSG_SEQ_NUMBER_MASK);
-		} else
-			bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI);
+		}
+
+		/* now it's safe to release the lock */
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
 	}
 }
 
@@ -8777,13 +8845,13 @@
 static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp)
 {
 	int pfid = BP_FUNC(bp);
-	int vn = BP_E1HVN(bp);
 	int igu_sb_id;
 	u32 val;
 	u8 fid, igu_sb_cnt = 0;
 
 	bp->igu_base_sb = 0xff;
 	if (CHIP_INT_MODE_IS_BC(bp)) {
+		int vn = BP_VN(bp);
 		igu_sb_cnt = bp->igu_sb_cnt;
 		bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) *
 			FP_SB_MAX_E1x;
@@ -9416,6 +9484,10 @@
 		bp->igu_base_sb = 0;
 	} else {
 		bp->common.int_block = INT_BLOCK_IGU;
+
+		/* do not allow device reset during IGU info preocessing */
+		bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
+
 		val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION);
 
 		if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) {
@@ -9447,6 +9519,7 @@
 
 		bnx2x_get_igu_cam_info(bp);
 
+		bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET);
 	}
 
 	/*
@@ -9473,7 +9546,7 @@
 
 	bp->mf_ov = 0;
 	bp->mf_mode = 0;
-	vn = BP_E1HVN(bp);
+	vn = BP_VN(bp);
 
 	if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) {
 		BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n",
@@ -9593,13 +9666,6 @@
 	/* port info */
 	bnx2x_get_port_hwinfo(bp);
 
-	if (!BP_NOMCP(bp)) {
-		bp->fw_seq =
-			(SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
-			 DRV_MSG_SEQ_NUMBER_MASK);
-		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
-	}
-
 	/* Get MAC addresses */
 	bnx2x_get_mac_hwinfo(bp);
 
@@ -9765,6 +9831,14 @@
 	if (!BP_NOMCP(bp))
 		bnx2x_undi_unload(bp);
 
+	/* init fw_seq after undi_unload! */
+	if (!BP_NOMCP(bp)) {
+		bp->fw_seq =
+			(SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) &
+			 DRV_MSG_SEQ_NUMBER_MASK);
+		BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq);
+	}
+
 	if (CHIP_REV_IS_FPGA(bp))
 		dev_err(&bp->pdev->dev, "FPGA detected\n");
 
@@ -10259,17 +10333,21 @@
 	/* clean indirect addresses */
 	pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS,
 			       PCICFG_VENDOR_ID_OFFSET);
-	/* Clean the following indirect addresses for all functions since it
+	/*
+	 * Clean the following indirect addresses for all functions since it
 	 * is not used by the driver.
 	 */
 	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0);
 	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0);
 	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0);
 	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
-	REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+
+	if (CHIP_IS_E1x(bp)) {
+		REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0);
+		REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0);
+		REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0);
+		REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0);
+	}
 
 	/*
 	 * Enable internal target-read (in case we are probed after PF FLR).
diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h
index 40266c1..fc7bd0f 100644
--- a/drivers/net/bnx2x/bnx2x_reg.h
+++ b/drivers/net/bnx2x/bnx2x_reg.h
@@ -1384,6 +1384,18 @@
    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
 #define MISC_REG_AEU_ENABLE4_PXP_0				 0xa108
 #define MISC_REG_AEU_ENABLE4_PXP_1				 0xa1a8
+/* [RW 32] fifth 32b for enabling the output for function 0 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_0_OUT_0			 0xa688
+/* [RW 32] Fifth 32b for enabling the output for function 1 output0. Mapped
+ * as follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
+ * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
+ * mstat0 attention; [7] mstat0 parity; [8] mstat1 attention; [9] mstat1
+ * parity; [31-10] Reserved; */
+#define MISC_REG_AEU_ENABLE5_FUNC_1_OUT_0			 0xa6b0
 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
    128 bit vector */
 #define MISC_REG_AEU_GENERAL_ATTN_0				 0xa000
@@ -5320,7 +5332,7 @@
 #define XCM_REG_XX_OVFL_EVNT_ID 				 0x20058
 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS	 (0x1<<0)
 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS	 (0x1<<1)
-#define XMAC_CTRL_REG_CORE_LOCAL_LPBK				 (0x1<<3)
+#define XMAC_CTRL_REG_LINE_LOCAL_LPBK				 (0x1<<2)
 #define XMAC_CTRL_REG_RX_EN					 (0x1<<1)
 #define XMAC_CTRL_REG_SOFT_RESET				 (0x1<<6)
 #define XMAC_CTRL_REG_TX_EN					 (0x1<<0)
@@ -5766,7 +5778,7 @@
 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0			 8
 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1			 9
 #define HW_LOCK_RESOURCE_SPIO					 2
-#define HW_LOCK_RESOURCE_UNDI					 5
+#define HW_LOCK_RESOURCE_RESET					 5
 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT			 (0x1<<4)
 #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR			 (0x1<<5)
 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR			 (0x1<<18)
@@ -6853,6 +6865,9 @@
 #define MDIO_WC_REG_IEEE0BLK_AUTONEGNP			0x7
 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0	0x10
 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1	0x11
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2	0x12
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY	0x4000
+#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ		0x8000
 #define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150  0x96
 #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL		0x8000
 #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1		0x800e
diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c
index 771f680..9908f2bb 100644
--- a/drivers/net/bnx2x/bnx2x_stats.c
+++ b/drivers/net/bnx2x/bnx2x_stats.c
@@ -710,7 +710,8 @@
 		break;
 
 	case MAC_TYPE_NONE: /* unreached */
-		BNX2X_ERR("stats updated by DMAE but no MAC active\n");
+		DP(BNX2X_MSG_STATS,
+		   "stats updated by DMAE but no MAC active\n");
 		return -1;
 
 	default: /* unreached */
@@ -1391,7 +1392,7 @@
 
 static void bnx2x_func_stats_base_init(struct bnx2x *bp)
 {
-	int vn, vn_max = IS_MF(bp) ? E1HVN_MAX : E1VN_MAX;
+	int vn, vn_max = IS_MF(bp) ? BP_MAX_VN_NUM(bp) : E1VN_MAX;
 	u32 func_stx;
 
 	/* sanity */
@@ -1404,7 +1405,7 @@
 	func_stx = bp->func_stx;
 
 	for (vn = VN_0; vn < vn_max; vn++) {
-		int mb_idx = CHIP_IS_E1x(bp) ? 2*vn + BP_PORT(bp) : vn;
+		int mb_idx = BP_FW_MB_IDX_VN(bp, vn);
 
 		bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param);
 		bnx2x_func_stats_init(bp);
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a047eb9..47b928e 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2168,7 +2168,8 @@
 	}
 
 re_arm:
-	queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
+	if (!bond->kill_timers)
+		queue_delayed_work(bond->wq, &bond->ad_work, ad_delta_in_ticks);
 out:
 	read_unlock(&bond->lock);
 }
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 7f8b20a3..d4fbd2e 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1440,7 +1440,8 @@
 	}
 
 re_arm:
-	queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
+	if (!bond->kill_timers)
+		queue_delayed_work(bond->wq, &bond->alb_work, alb_delta_in_ticks);
 out:
 	read_unlock(&bond->lock);
 }
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 43f2ea5..6d79b78 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -777,6 +777,9 @@
 
 	read_lock(&bond->lock);
 
+	if (bond->kill_timers)
+		goto out;
+
 	/* rejoin all groups on bond device */
 	__bond_resend_igmp_join_requests(bond->dev);
 
@@ -790,9 +793,9 @@
 			__bond_resend_igmp_join_requests(vlan_dev);
 	}
 
-	if (--bond->igmp_retrans > 0)
+	if ((--bond->igmp_retrans > 0) && !bond->kill_timers)
 		queue_delayed_work(bond->wq, &bond->mcast_work, HZ/5);
-
+out:
 	read_unlock(&bond->lock);
 }
 
@@ -2538,7 +2541,7 @@
 	}
 
 re_arm:
-	if (bond->params.miimon)
+	if (bond->params.miimon && !bond->kill_timers)
 		queue_delayed_work(bond->wq, &bond->mii_work,
 				   msecs_to_jiffies(bond->params.miimon));
 out:
@@ -2886,7 +2889,7 @@
 	}
 
 re_arm:
-	if (bond->params.arp_interval)
+	if (bond->params.arp_interval && !bond->kill_timers)
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
 out:
 	read_unlock(&bond->lock);
@@ -3154,7 +3157,7 @@
 	bond_ab_arp_probe(bond);
 
 re_arm:
-	if (bond->params.arp_interval)
+	if (bond->params.arp_interval && !bond->kill_timers)
 		queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
 out:
 	read_unlock(&bond->lock);
diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c
index a812492..2adc294 100644
--- a/drivers/net/can/ti_hecc.c
+++ b/drivers/net/can/ti_hecc.c
@@ -46,6 +46,7 @@
 #include <linux/skbuff.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/io.h>
 
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
diff --git a/drivers/net/cxgb3/cxgb3_offload.c b/drivers/net/cxgb3/cxgb3_offload.c
index 805076c..da5a5d9 100644
--- a/drivers/net/cxgb3/cxgb3_offload.c
+++ b/drivers/net/cxgb3/cxgb3_offload.c
@@ -1146,12 +1146,14 @@
 		if (te && te->ctx && te->client && te->client->redirect) {
 			update_tcb = te->client->redirect(te->ctx, old, new, e);
 			if (update_tcb) {
+				rcu_read_lock();
 				l2t_hold(L2DATA(tdev), e);
+				rcu_read_unlock();
 				set_l2t_ix(tdev, tid, e);
 			}
 		}
 	}
-	l2t_release(L2DATA(tdev), e);
+	l2t_release(tdev, e);
 }
 
 /*
@@ -1264,7 +1266,7 @@
 		goto out_free;
 
 	err = -ENOMEM;
-	L2DATA(dev) = t3_init_l2t(l2t_capacity);
+	RCU_INIT_POINTER(dev->l2opt, t3_init_l2t(l2t_capacity));
 	if (!L2DATA(dev))
 		goto out_free;
 
@@ -1298,16 +1300,24 @@
 
 out_free_l2t:
 	t3_free_l2t(L2DATA(dev));
-	L2DATA(dev) = NULL;
+	rcu_assign_pointer(dev->l2opt, NULL);
 out_free:
 	kfree(t);
 	return err;
 }
 
+static void clean_l2_data(struct rcu_head *head)
+{
+	struct l2t_data *d = container_of(head, struct l2t_data, rcu_head);
+	t3_free_l2t(d);
+}
+
+
 void cxgb3_offload_deactivate(struct adapter *adapter)
 {
 	struct t3cdev *tdev = &adapter->tdev;
 	struct t3c_data *t = T3C_DATA(tdev);
+	struct l2t_data *d;
 
 	remove_adapter(adapter);
 	if (list_empty(&adapter_list))
@@ -1315,8 +1325,11 @@
 
 	free_tid_maps(&t->tid_maps);
 	T3C_DATA(tdev) = NULL;
-	t3_free_l2t(L2DATA(tdev));
-	L2DATA(tdev) = NULL;
+	rcu_read_lock();
+	d = L2DATA(tdev);
+	rcu_read_unlock();
+	rcu_assign_pointer(tdev->l2opt, NULL);
+	call_rcu(&d->rcu_head, clean_l2_data);
 	if (t->nofail_skb)
 		kfree_skb(t->nofail_skb);
 	kfree(t);
diff --git a/drivers/net/cxgb3/l2t.c b/drivers/net/cxgb3/l2t.c
index f452c40..4154097 100644
--- a/drivers/net/cxgb3/l2t.c
+++ b/drivers/net/cxgb3/l2t.c
@@ -300,14 +300,21 @@
 struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
 			     struct net_device *dev)
 {
-	struct l2t_entry *e;
-	struct l2t_data *d = L2DATA(cdev);
+	struct l2t_entry *e = NULL;
+	struct l2t_data *d;
+	int hash;
 	u32 addr = *(u32 *) neigh->primary_key;
 	int ifidx = neigh->dev->ifindex;
-	int hash = arp_hash(addr, ifidx, d);
 	struct port_info *p = netdev_priv(dev);
 	int smt_idx = p->port_id;
 
+	rcu_read_lock();
+	d = L2DATA(cdev);
+	if (!d)
+		goto done_rcu;
+
+	hash = arp_hash(addr, ifidx, d);
+
 	write_lock_bh(&d->lock);
 	for (e = d->l2tab[hash].first; e; e = e->next)
 		if (e->addr == addr && e->ifindex == ifidx &&
@@ -338,6 +345,8 @@
 	}
 done:
 	write_unlock_bh(&d->lock);
+done_rcu:
+	rcu_read_unlock();
 	return e;
 }
 
diff --git a/drivers/net/cxgb3/l2t.h b/drivers/net/cxgb3/l2t.h
index 7a12d52e..c5f5479 100644
--- a/drivers/net/cxgb3/l2t.h
+++ b/drivers/net/cxgb3/l2t.h
@@ -76,6 +76,7 @@
 	atomic_t nfree;		/* number of free entries */
 	rwlock_t lock;
 	struct l2t_entry l2tab[0];
+	struct rcu_head rcu_head;	/* to handle rcu cleanup */
 };
 
 typedef void (*arp_failure_handler_func)(struct t3cdev * dev,
@@ -99,7 +100,7 @@
 /*
  * Getting to the L2 data from an offload device.
  */
-#define L2DATA(dev) ((dev)->l2opt)
+#define L2DATA(cdev) (rcu_dereference((cdev)->l2opt))
 
 #define W_TCB_L2T_IX    0
 #define S_TCB_L2T_IX    7
@@ -126,15 +127,22 @@
 	return t3_l2t_send_slow(dev, skb, e);
 }
 
-static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e)
+static inline void l2t_release(struct t3cdev *t, struct l2t_entry *e)
 {
-	if (atomic_dec_and_test(&e->refcnt))
+	struct l2t_data *d;
+
+	rcu_read_lock();
+	d = L2DATA(t);
+
+	if (atomic_dec_and_test(&e->refcnt) && d)
 		t3_l2e_free(d, e);
+
+	rcu_read_unlock();
 }
 
 static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e)
 {
-	if (atomic_add_return(1, &e->refcnt) == 1)	/* 0 -> 1 transition */
+	if (d && atomic_add_return(1, &e->refcnt) == 1)	/* 0 -> 1 transition */
 		atomic_dec(&d->nfree);
 }
 
diff --git a/drivers/net/cxgb4/cxgb4_main.c b/drivers/net/cxgb4/cxgb4_main.c
index c9957b7..b4efa29 100644
--- a/drivers/net/cxgb4/cxgb4_main.c
+++ b/drivers/net/cxgb4/cxgb4_main.c
@@ -3712,6 +3712,9 @@
 		setup_debugfs(adapter);
 	}
 
+	/* PCIe EEH recovery on powerpc platforms needs fundamental reset */
+	pdev->needs_freset = 1;
+
 	if (is_offload(adapter))
 		attach_ulds(adapter);
 
diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c
index 8545c7a..a5a89ec 100644
--- a/drivers/net/e1000/e1000_hw.c
+++ b/drivers/net/e1000/e1000_hw.c
@@ -4026,6 +4026,12 @@
 		checksum += eeprom_data;
 	}
 
+#ifdef CONFIG_PARISC
+	/* This is a signature and not a checksum on HP c8000 */
+	if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6))
+		return E1000_SUCCESS;
+
+#endif
 	if (checksum == (u16) EEPROM_SUM)
 		return E1000_SUCCESS;
 	else {
diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c
index 25a8c2a..0caf3c3 100644
--- a/drivers/net/gianfar_ethtool.c
+++ b/drivers/net/gianfar_ethtool.c
@@ -1669,10 +1669,10 @@
 	u32 i = 0;
 
 	list_for_each_entry(comp, &priv->rx_list.list, list) {
-		if (i <= cmd->rule_cnt) {
-			rule_locs[i] = comp->fs.location;
-			i++;
-		}
+		if (i == cmd->rule_cnt)
+			return -EMSGSIZE;
+		rule_locs[i] = comp->fs.location;
+		i++;
 	}
 
 	cmd->data = MAX_FILER_IDX;
diff --git a/drivers/net/greth.c b/drivers/net/greth.c
index 16ce45c..52a3900 100644
--- a/drivers/net/greth.c
+++ b/drivers/net/greth.c
@@ -428,6 +428,7 @@
 	dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE);
 
 	status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN);
+	greth->tx_bufs_length[greth->tx_next] = skb->len & GRETH_BD_LEN;
 
 	/* Wrap around descriptor ring */
 	if (greth->tx_next == GRETH_TXBD_NUM_MASK) {
@@ -490,7 +491,8 @@
 	if (nr_frags != 0)
 		status = GRETH_TXBD_MORE;
 
-	status |= GRETH_TXBD_CSALL;
+	if (skb->ip_summed == CHECKSUM_PARTIAL)
+		status |= GRETH_TXBD_CSALL;
 	status |= skb_headlen(skb) & GRETH_BD_LEN;
 	if (greth->tx_next == GRETH_TXBD_NUM_MASK)
 		status |= GRETH_BD_WR;
@@ -513,7 +515,9 @@
 		greth->tx_skbuff[curr_tx] = NULL;
 		bdp = greth->tx_bd_base + curr_tx;
 
-		status = GRETH_TXBD_CSALL | GRETH_BD_EN;
+		status = GRETH_BD_EN;
+		if (skb->ip_summed == CHECKSUM_PARTIAL)
+			status |= GRETH_TXBD_CSALL;
 		status |= frag->size & GRETH_BD_LEN;
 
 		/* Wrap around descriptor ring */
@@ -641,6 +645,7 @@
 				dev->stats.tx_fifo_errors++;
 		}
 		dev->stats.tx_packets++;
+		dev->stats.tx_bytes += greth->tx_bufs_length[greth->tx_last];
 		greth->tx_last = NEXT_TX(greth->tx_last);
 		greth->tx_free++;
 	}
@@ -695,6 +700,7 @@
 		greth->tx_skbuff[greth->tx_last] = NULL;
 
 		greth_update_tx_stats(dev, stat);
+		dev->stats.tx_bytes += skb->len;
 
 		bdp = greth->tx_bd_base + greth->tx_last;
 
@@ -796,6 +802,7 @@
 				memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len);
 
 				skb->protocol = eth_type_trans(skb, dev);
+				dev->stats.rx_bytes += pkt_len;
 				dev->stats.rx_packets++;
 				netif_receive_skb(skb);
 			}
@@ -910,6 +917,7 @@
 
 				skb->protocol = eth_type_trans(skb, dev);
 				dev->stats.rx_packets++;
+				dev->stats.rx_bytes += pkt_len;
 				netif_receive_skb(skb);
 
 				greth->rx_skbuff[greth->rx_cur] = newskb;
diff --git a/drivers/net/greth.h b/drivers/net/greth.h
index 9a0040d..232a622 100644
--- a/drivers/net/greth.h
+++ b/drivers/net/greth.h
@@ -103,6 +103,7 @@
 
 	unsigned char *tx_bufs[GRETH_TXBD_NUM];
 	unsigned char *rx_bufs[GRETH_RXBD_NUM];
+	u16 tx_bufs_length[GRETH_TXBD_NUM];
 
 	u16 tx_next;
 	u16 tx_last;
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index 3e66792..d393f1e 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -636,8 +636,8 @@
 		netdev_err(netdev, "unable to request irq 0x%x, rc %d\n",
 			   netdev->irq, rc);
 		do {
-			rc = h_free_logical_lan(adapter->vdev->unit_address);
-		} while (H_IS_LONG_BUSY(rc) || (rc == H_BUSY));
+			lpar_rc = h_free_logical_lan(adapter->vdev->unit_address);
+		} while (H_IS_LONG_BUSY(lpar_rc) || (lpar_rc == H_BUSY));
 
 		goto err_out;
 	}
@@ -757,7 +757,7 @@
 	struct ibmveth_adapter *adapter = netdev_priv(dev);
 	unsigned long set_attr, clr_attr, ret_attr;
 	unsigned long set_attr6, clr_attr6;
-	long ret, ret6;
+	long ret, ret4, ret6;
 	int rc1 = 0, rc2 = 0;
 	int restart = 0;
 
@@ -770,6 +770,8 @@
 
 	set_attr = 0;
 	clr_attr = 0;
+	set_attr6 = 0;
+	clr_attr6 = 0;
 
 	if (data) {
 		set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM;
@@ -784,16 +786,20 @@
 	if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) &&
 	    !(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) &&
 	    (ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) {
-		ret = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
+		ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr,
 					 set_attr, &ret_attr);
 
-		if (ret != H_SUCCESS) {
+		if (ret4 != H_SUCCESS) {
 			netdev_err(dev, "unable to change IPv4 checksum "
 					"offload settings. %d rc=%ld\n",
-					data, ret);
+					data, ret4);
 
-			ret = h_illan_attributes(adapter->vdev->unit_address,
-						 set_attr, clr_attr, &ret_attr);
+			h_illan_attributes(adapter->vdev->unit_address,
+					   set_attr, clr_attr, &ret_attr);
+
+			if (data == 1)
+				dev->features &= ~NETIF_F_IP_CSUM;
+
 		} else {
 			adapter->fw_ipv4_csum_support = data;
 		}
@@ -804,15 +810,18 @@
 		if (ret6 != H_SUCCESS) {
 			netdev_err(dev, "unable to change IPv6 checksum "
 					"offload settings. %d rc=%ld\n",
-					data, ret);
+					data, ret6);
 
-			ret = h_illan_attributes(adapter->vdev->unit_address,
-						 set_attr6, clr_attr6,
-						 &ret_attr);
+			h_illan_attributes(adapter->vdev->unit_address,
+					   set_attr6, clr_attr6, &ret_attr);
+
+			if (data == 1)
+				dev->features &= ~NETIF_F_IPV6_CSUM;
+
 		} else
 			adapter->fw_ipv6_csum_support = data;
 
-		if (ret != H_SUCCESS || ret6 != H_SUCCESS)
+		if (ret4 == H_SUCCESS || ret6 == H_SUCCESS)
 			adapter->rx_csum = data;
 		else
 			rc1 = -EIO;
@@ -930,6 +939,7 @@
 	union ibmveth_buf_desc descs[6];
 	int last, i;
 	int force_bounce = 0;
+	dma_addr_t dma_addr;
 
 	/*
 	 * veth handles a maximum of 6 segments including the header, so
@@ -994,17 +1004,16 @@
 	}
 
 	/* Map the header */
-	descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data,
-						 skb_headlen(skb),
-						 DMA_TO_DEVICE);
-	if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address))
+	dma_addr = dma_map_single(&adapter->vdev->dev, skb->data,
+				  skb_headlen(skb), DMA_TO_DEVICE);
+	if (dma_mapping_error(&adapter->vdev->dev, dma_addr))
 		goto map_failed;
 
 	descs[0].fields.flags_len = desc_flags | skb_headlen(skb);
+	descs[0].fields.address = dma_addr;
 
 	/* Map the frags */
 	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-		unsigned long dma_addr;
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
 
 		dma_addr = dma_map_page(&adapter->vdev->dev, frag->page,
@@ -1026,7 +1035,12 @@
 		netdev->stats.tx_bytes += skb->len;
 	}
 
-	for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++)
+	dma_unmap_single(&adapter->vdev->dev,
+			 descs[0].fields.address,
+			 descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK,
+			 DMA_TO_DEVICE);
+
+	for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++)
 		dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address,
 			       descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK,
 			       DMA_TO_DEVICE);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2279039..e1fcc95 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1321,8 +1321,8 @@
 		if (ring_is_rsc_enabled(rx_ring))
 			pkt_is_rsc = ixgbe_get_rsc_state(rx_desc);
 
-		/* if this is a skb from previous receive DMA will be 0 */
-		if (rx_buffer_info->dma) {
+		/* linear means we are building an skb from multiple pages */
+		if (!skb_is_nonlinear(skb)) {
 			u16 hlen;
 			if (pkt_is_rsc &&
 			    !(staterr & IXGBE_RXD_STAT_EOP) &&
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index dfc8272..ed2a397 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -799,5 +799,11 @@
 	}
 }
 
-module_init(init_netconsole);
+/*
+ * Use late_initcall to ensure netconsole is
+ * initialized after network device driver if built-in.
+ *
+ * late_initcall() and module_init() are identical if built as module.
+ */
+late_initcall(init_netconsole);
 module_exit(cleanup_netconsole);
diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h
index 59fac77..a09a0719 100644
--- a/drivers/net/pch_gbe/pch_gbe.h
+++ b/drivers/net/pch_gbe/pch_gbe.h
@@ -127,8 +127,8 @@
 
 /* Reset */
 #define PCH_GBE_ALL_RST         0x80000000  /* All reset */
-#define PCH_GBE_TX_RST          0x40000000  /* TX MAC, TX FIFO, TX DMA reset */
-#define PCH_GBE_RX_RST          0x04000000  /* RX MAC, RX FIFO, RX DMA reset */
+#define PCH_GBE_TX_RST          0x00008000  /* TX MAC, TX FIFO, TX DMA reset */
+#define PCH_GBE_RX_RST          0x00004000  /* RX MAC, RX FIFO, RX DMA reset */
 
 /* TCP/IP Accelerator Control */
 #define PCH_GBE_EX_LIST_EN      0x00000008  /* External List Enable */
@@ -276,6 +276,9 @@
 #define PCH_GBE_RX_DMA_EN       0x00000002   /* Enables Receive DMA */
 #define PCH_GBE_TX_DMA_EN       0x00000001   /* Enables Transmission DMA */
 
+/* RX DMA STATUS */
+#define PCH_GBE_IDLE_CHECK       0xFFFFFFFE
+
 /* Wake On LAN Status */
 #define PCH_GBE_WLS_BR          0x00000008 /* Broadcas Address */
 #define PCH_GBE_WLS_MLT         0x00000004 /* Multicast Address */
@@ -471,6 +474,7 @@
 struct pch_gbe_buffer {
 	struct sk_buff *skb;
 	dma_addr_t dma;
+	unsigned char *rx_buffer;
 	unsigned long time_stamp;
 	u16 length;
 	bool mapped;
@@ -511,6 +515,9 @@
 struct pch_gbe_rx_ring {
 	struct pch_gbe_rx_desc *desc;
 	dma_addr_t dma;
+	unsigned char *rx_buff_pool;
+	dma_addr_t rx_buff_pool_logic;
+	unsigned int rx_buff_pool_size;
 	unsigned int size;
 	unsigned int count;
 	unsigned int next_to_use;
@@ -622,6 +629,7 @@
 	unsigned long rx_buffer_len;
 	unsigned long tx_queue_len;
 	bool have_msi;
+	bool rx_stop_flag;
 };
 
 extern const char pch_driver_version[];
diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c
index eac3c5c..b8b4ba2 100644
--- a/drivers/net/pch_gbe/pch_gbe_main.c
+++ b/drivers/net/pch_gbe/pch_gbe_main.c
@@ -20,7 +20,6 @@
 
 #include "pch_gbe.h"
 #include "pch_gbe_api.h"
-#include <linux/prefetch.h>
 
 #define DRV_VERSION     "1.00"
 const char pch_driver_version[] = DRV_VERSION;
@@ -34,11 +33,15 @@
 #define PCH_GBE_WATCHDOG_PERIOD		(1 * HZ)	/* watchdog time */
 #define PCH_GBE_COPYBREAK_DEFAULT	256
 #define PCH_GBE_PCI_BAR			1
+#define PCH_GBE_RESERVE_MEMORY		0x200000	/* 2MB */
 
 /* Macros for ML7223 */
 #define PCI_VENDOR_ID_ROHM			0x10db
 #define PCI_DEVICE_ID_ROHM_ML7223_GBE		0x8013
 
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_GBE		0x8802
+
 #define PCH_GBE_TX_WEIGHT         64
 #define PCH_GBE_RX_WEIGHT         64
 #define PCH_GBE_RX_BUFFER_WRITE   16
@@ -52,6 +55,7 @@
 	)
 
 /* Ethertype field values */
+#define PCH_GBE_MAX_RX_BUFFER_SIZE      0x2880
 #define PCH_GBE_MAX_JUMBO_FRAME_SIZE    10318
 #define PCH_GBE_FRAME_SIZE_2048         2048
 #define PCH_GBE_FRAME_SIZE_4096         4096
@@ -83,10 +87,12 @@
 #define PCH_GBE_INT_ENABLE_MASK ( \
 	PCH_GBE_INT_RX_DMA_CMPLT |    \
 	PCH_GBE_INT_RX_DSC_EMP   |    \
+	PCH_GBE_INT_RX_FIFO_ERR  |    \
 	PCH_GBE_INT_WOL_DET      |    \
 	PCH_GBE_INT_TX_CMPLT          \
 	)
 
+#define PCH_GBE_INT_DISABLE_ALL		0
 
 static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT;
 
@@ -138,6 +144,27 @@
 	if (!tmp)
 		pr_err("Error: busy bit is not cleared\n");
 }
+
+/**
+ * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context
+ * @reg:	Pointer of register
+ * @busy:	Busy bit
+ */
+static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit)
+{
+	u32 tmp;
+	int ret = -1;
+	/* wait busy */
+	tmp = 20;
+	while ((ioread32(reg) & bit) && --tmp)
+		udelay(5);
+	if (!tmp)
+		pr_err("Error: busy bit is not cleared\n");
+	else
+		ret = 0;
+	return ret;
+}
+
 /**
  * pch_gbe_mac_mar_set - Set MAC address register
  * @hw:	    Pointer to the HW structure
@@ -189,6 +216,17 @@
 	return;
 }
 
+static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw)
+{
+	/* Read the MAC address. and store to the private data */
+	pch_gbe_mac_read_mac_addr(hw);
+	iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET);
+	pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST);
+	/* Setup the MAC address */
+	pch_gbe_mac_mar_set(hw, hw->mac.addr, 0);
+	return;
+}
+
 /**
  * pch_gbe_mac_init_rx_addrs - Initialize receive address's
  * @hw:	Pointer to the HW structure
@@ -671,13 +709,8 @@
 
 	tcpip = ioread32(&hw->reg->TCPIP_ACC);
 
-	if (netdev->features & NETIF_F_RXCSUM) {
-		tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF;
-		tcpip |= PCH_GBE_RX_TCPIPACC_EN;
-	} else {
-		tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
-		tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
-	}
+	tcpip |= PCH_GBE_RX_TCPIPACC_OFF;
+	tcpip &= ~PCH_GBE_RX_TCPIPACC_EN;
 	iowrite32(tcpip, &hw->reg->TCPIP_ACC);
 	return;
 }
@@ -717,13 +750,6 @@
 	iowrite32(rdba, &hw->reg->RX_DSC_BASE);
 	iowrite32(rdlen, &hw->reg->RX_DSC_SIZE);
 	iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P);
-
-	/* Enables Receive DMA */
-	rxdma = ioread32(&hw->reg->DMA_CTRL);
-	rxdma |= PCH_GBE_RX_DMA_EN;
-	iowrite32(rxdma, &hw->reg->DMA_CTRL);
-	/* Enables Receive */
-	iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
 }
 
 /**
@@ -1097,6 +1123,48 @@
 	spin_unlock_irqrestore(&adapter->stats_lock, flags);
 }
 
+static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter)
+{
+	struct pch_gbe_hw *hw = &adapter->hw;
+	u32 rxdma;
+	u16 value;
+	int ret;
+
+	/* Disable Receive DMA */
+	rxdma = ioread32(&hw->reg->DMA_CTRL);
+	rxdma &= ~PCH_GBE_RX_DMA_EN;
+	iowrite32(rxdma, &hw->reg->DMA_CTRL);
+	/* Wait Rx DMA BUS is IDLE */
+	ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK);
+	if (ret) {
+		/* Disable Bus master */
+		pci_read_config_word(adapter->pdev, PCI_COMMAND, &value);
+		value &= ~PCI_COMMAND_MASTER;
+		pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+		/* Stop Receive */
+		pch_gbe_mac_reset_rx(hw);
+		/* Enable Bus master */
+		value |= PCI_COMMAND_MASTER;
+		pci_write_config_word(adapter->pdev, PCI_COMMAND, value);
+	} else {
+		/* Stop Receive */
+		pch_gbe_mac_reset_rx(hw);
+	}
+}
+
+static void pch_gbe_start_receive(struct pch_gbe_hw *hw)
+{
+	u32 rxdma;
+
+	/* Enables Receive DMA */
+	rxdma = ioread32(&hw->reg->DMA_CTRL);
+	rxdma |= PCH_GBE_RX_DMA_EN;
+	iowrite32(rxdma, &hw->reg->DMA_CTRL);
+	/* Enables Receive */
+	iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN);
+	return;
+}
+
 /**
  * pch_gbe_intr - Interrupt Handler
  * @irq:   Interrupt number
@@ -1123,7 +1191,17 @@
 	if (int_st & PCH_GBE_INT_RX_FRAME_ERR)
 		adapter->stats.intr_rx_frame_err_count++;
 	if (int_st & PCH_GBE_INT_RX_FIFO_ERR)
-		adapter->stats.intr_rx_fifo_err_count++;
+		if (!adapter->rx_stop_flag) {
+			adapter->stats.intr_rx_fifo_err_count++;
+			pr_debug("Rx fifo over run\n");
+			adapter->rx_stop_flag = true;
+			int_en = ioread32(&hw->reg->INT_EN);
+			iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR),
+				  &hw->reg->INT_EN);
+			pch_gbe_stop_receive(adapter);
+			int_st |= ioread32(&hw->reg->INT_ST);
+			int_st = int_st & ioread32(&hw->reg->INT_EN);
+		}
 	if (int_st & PCH_GBE_INT_RX_DMA_ERR)
 		adapter->stats.intr_rx_dma_err_count++;
 	if (int_st & PCH_GBE_INT_TX_FIFO_ERR)
@@ -1135,21 +1213,18 @@
 	/* When Rx descriptor is empty  */
 	if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) {
 		adapter->stats.intr_rx_dsc_empty_count++;
-		pr_err("Rx descriptor is empty\n");
+		pr_debug("Rx descriptor is empty\n");
 		int_en = ioread32(&hw->reg->INT_EN);
 		iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN);
 		if (hw->mac.tx_fc_enable) {
 			/* Set Pause packet */
 			pch_gbe_mac_set_pause_packet(hw);
 		}
-		if ((int_en & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))
-		    == 0) {
-			return IRQ_HANDLED;
-		}
 	}
 
 	/* When request status is Receive interruption */
-	if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT))) {
+	if ((int_st & (PCH_GBE_INT_RX_DMA_CMPLT | PCH_GBE_INT_TX_CMPLT)) ||
+	    (adapter->rx_stop_flag == true)) {
 		if (likely(napi_schedule_prep(&adapter->napi))) {
 			/* Enable only Rx Descriptor empty */
 			atomic_inc(&adapter->irq_sem);
@@ -1185,29 +1260,23 @@
 	unsigned int i;
 	unsigned int bufsz;
 
-	bufsz = adapter->rx_buffer_len + PCH_GBE_DMA_ALIGN;
+	bufsz = adapter->rx_buffer_len + NET_IP_ALIGN;
 	i = rx_ring->next_to_use;
 
 	while ((cleaned_count--)) {
 		buffer_info = &rx_ring->buffer_info[i];
-		skb = buffer_info->skb;
-		if (skb) {
-			skb_trim(skb, 0);
-		} else {
-			skb = netdev_alloc_skb(netdev, bufsz);
-			if (unlikely(!skb)) {
-				/* Better luck next round */
-				adapter->stats.rx_alloc_buff_failed++;
-				break;
-			}
-			/* 64byte align */
-			skb_reserve(skb, PCH_GBE_DMA_ALIGN);
-
-			buffer_info->skb = skb;
-			buffer_info->length = adapter->rx_buffer_len;
+		skb = netdev_alloc_skb(netdev, bufsz);
+		if (unlikely(!skb)) {
+			/* Better luck next round */
+			adapter->stats.rx_alloc_buff_failed++;
+			break;
 		}
+		/* align */
+		skb_reserve(skb, NET_IP_ALIGN);
+		buffer_info->skb = skb;
+
 		buffer_info->dma = dma_map_single(&pdev->dev,
-						  skb->data,
+						  buffer_info->rx_buffer,
 						  buffer_info->length,
 						  DMA_FROM_DEVICE);
 		if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) {
@@ -1240,6 +1309,36 @@
 	return;
 }
 
+static int
+pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter,
+			 struct pch_gbe_rx_ring *rx_ring, int cleaned_count)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct pch_gbe_buffer *buffer_info;
+	unsigned int i;
+	unsigned int bufsz;
+	unsigned int size;
+
+	bufsz = adapter->rx_buffer_len;
+
+	size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY;
+	rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size,
+						&rx_ring->rx_buff_pool_logic,
+						GFP_KERNEL);
+	if (!rx_ring->rx_buff_pool) {
+		pr_err("Unable to allocate memory for the receive poll buffer\n");
+		return -ENOMEM;
+	}
+	memset(rx_ring->rx_buff_pool, 0, size);
+	rx_ring->rx_buff_pool_size = size;
+	for (i = 0; i < rx_ring->count; i++) {
+		buffer_info = &rx_ring->buffer_info[i];
+		buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i;
+		buffer_info->length = bufsz;
+	}
+	return 0;
+}
+
 /**
  * pch_gbe_alloc_tx_buffers - Allocate transmit buffers
  * @adapter:   Board private structure
@@ -1285,7 +1384,7 @@
 	struct sk_buff *skb;
 	unsigned int i;
 	unsigned int cleaned_count = 0;
-	bool cleaned = false;
+	bool cleaned = true;
 
 	pr_debug("next_to_clean : %d\n", tx_ring->next_to_clean);
 
@@ -1296,7 +1395,6 @@
 
 	while ((tx_desc->gbec_status & DSC_INIT16) == 0x0000) {
 		pr_debug("gbec_status:0x%04x\n", tx_desc->gbec_status);
-		cleaned = true;
 		buffer_info = &tx_ring->buffer_info[i];
 		skb = buffer_info->skb;
 
@@ -1339,8 +1437,10 @@
 		tx_desc = PCH_GBE_TX_DESC(*tx_ring, i);
 
 		/* weight of a sort for tx, to avoid endless transmit cleanup */
-		if (cleaned_count++ == PCH_GBE_TX_WEIGHT)
+		if (cleaned_count++ == PCH_GBE_TX_WEIGHT) {
+			cleaned = false;
 			break;
+		}
 	}
 	pr_debug("called pch_gbe_unmap_and_free_tx_resource() %d count\n",
 		 cleaned_count);
@@ -1380,7 +1480,7 @@
 	unsigned int i;
 	unsigned int cleaned_count = 0;
 	bool cleaned = false;
-	struct sk_buff *skb, *new_skb;
+	struct sk_buff *skb;
 	u8 dma_status;
 	u16 gbec_status;
 	u32 tcp_ip_status;
@@ -1401,13 +1501,12 @@
 		rx_desc->gbec_status = DSC_INIT16;
 		buffer_info = &rx_ring->buffer_info[i];
 		skb = buffer_info->skb;
+		buffer_info->skb = NULL;
 
 		/* unmap dma */
 		dma_unmap_single(&pdev->dev, buffer_info->dma,
 				   buffer_info->length, DMA_FROM_DEVICE);
 		buffer_info->mapped = false;
-		/* Prefetch the packet */
-		prefetch(skb->data);
 
 		pr_debug("RxDecNo = 0x%04x  Status[DMA:0x%02x GBE:0x%04x "
 			 "TCP:0x%08x]  BufInf = 0x%p\n",
@@ -1427,70 +1526,16 @@
 			pr_err("Receive CRC Error\n");
 		} else {
 			/* get receive length */
-			/* length convert[-3] */
-			length = (rx_desc->rx_words_eob) - 3;
+			/* length convert[-3], length includes FCS length */
+			length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN;
+			if (rx_desc->rx_words_eob & 0x02)
+				length = length - 4;
+			/*
+			 * buffer_info->rx_buffer: [Header:14][payload]
+			 * skb->data: [Reserve:2][Header:14][payload]
+			 */
+			memcpy(skb->data, buffer_info->rx_buffer, length);
 
-			/* Decide the data conversion method */
-			if (!(netdev->features & NETIF_F_RXCSUM)) {
-				/* [Header:14][payload] */
-				if (NET_IP_ALIGN) {
-					/* Because alignment differs,
-					 * the new_skb is newly allocated,
-					 * and data is copied to new_skb.*/
-					new_skb = netdev_alloc_skb(netdev,
-							 length + NET_IP_ALIGN);
-					if (!new_skb) {
-						/* dorrop error */
-						pr_err("New skb allocation "
-							"Error\n");
-						goto dorrop;
-					}
-					skb_reserve(new_skb, NET_IP_ALIGN);
-					memcpy(new_skb->data, skb->data,
-					       length);
-					skb = new_skb;
-				} else {
-					/* DMA buffer is used as SKB as it is.*/
-					buffer_info->skb = NULL;
-				}
-			} else {
-				/* [Header:14][padding:2][payload] */
-				/* The length includes padding length */
-				length = length - PCH_GBE_DMA_PADDING;
-				if ((length < copybreak) ||
-				    (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) {
-					/* Because alignment differs,
-					 * the new_skb is newly allocated,
-					 * and data is copied to new_skb.
-					 * Padding data is deleted
-					 * at the time of a copy.*/
-					new_skb = netdev_alloc_skb(netdev,
-							 length + NET_IP_ALIGN);
-					if (!new_skb) {
-						/* dorrop error */
-						pr_err("New skb allocation "
-							"Error\n");
-						goto dorrop;
-					}
-					skb_reserve(new_skb, NET_IP_ALIGN);
-					memcpy(new_skb->data, skb->data,
-					       ETH_HLEN);
-					memcpy(&new_skb->data[ETH_HLEN],
-					       &skb->data[ETH_HLEN +
-					       PCH_GBE_DMA_PADDING],
-					       length - ETH_HLEN);
-					skb = new_skb;
-				} else {
-					/* Padding data is deleted
-					 * by moving header data.*/
-					memmove(&skb->data[PCH_GBE_DMA_PADDING],
-						&skb->data[0], ETH_HLEN);
-					skb_reserve(skb, NET_IP_ALIGN);
-					buffer_info->skb = NULL;
-				}
-			}
-			/* The length includes FCS length */
-			length = length - ETH_FCS_LEN;
 			/* update status of driver */
 			adapter->stats.rx_bytes += length;
 			adapter->stats.rx_packets++;
@@ -1509,7 +1554,6 @@
 			pr_debug("Receive skb->ip_summed: %d length: %d\n",
 				 skb->ip_summed, length);
 		}
-dorrop:
 		/* return some buffers to hardware, one at a time is too slow */
 		if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) {
 			pch_gbe_alloc_rx_buffers(adapter, rx_ring,
@@ -1714,9 +1758,15 @@
 		pr_err("Error: can't bring device up\n");
 		return err;
 	}
+	err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count);
+	if (err) {
+		pr_err("Error: can't bring device up\n");
+		return err;
+	}
 	pch_gbe_alloc_tx_buffers(adapter, tx_ring);
 	pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count);
 	adapter->tx_queue_len = netdev->tx_queue_len;
+	pch_gbe_start_receive(&adapter->hw);
 
 	mod_timer(&adapter->watchdog_timer, jiffies);
 
@@ -1734,6 +1784,7 @@
 void pch_gbe_down(struct pch_gbe_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
+	struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
 
 	/* signal that we're down so the interrupt handler does not
 	 * reschedule our watchdog timer */
@@ -1752,6 +1803,12 @@
 	pch_gbe_reset(adapter);
 	pch_gbe_clean_tx_ring(adapter, adapter->tx_ring);
 	pch_gbe_clean_rx_ring(adapter, adapter->rx_ring);
+
+	pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size,
+			    rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic);
+	rx_ring->rx_buff_pool_logic = 0;
+	rx_ring->rx_buff_pool_size = 0;
+	rx_ring->rx_buff_pool = NULL;
 }
 
 /**
@@ -2004,6 +2061,8 @@
 {
 	struct pch_gbe_adapter *adapter = netdev_priv(netdev);
 	int max_frame;
+	unsigned long old_rx_buffer_len = adapter->rx_buffer_len;
+	int err;
 
 	max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN;
 	if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) ||
@@ -2018,14 +2077,24 @@
 	else if (max_frame <= PCH_GBE_FRAME_SIZE_8192)
 		adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192;
 	else
-		adapter->rx_buffer_len = PCH_GBE_MAX_JUMBO_FRAME_SIZE;
-	netdev->mtu = new_mtu;
-	adapter->hw.mac.max_frame_size = max_frame;
+		adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE;
 
-	if (netif_running(netdev))
-		pch_gbe_reinit_locked(adapter);
-	else
+	if (netif_running(netdev)) {
+		pch_gbe_down(adapter);
+		err = pch_gbe_up(adapter);
+		if (err) {
+			adapter->rx_buffer_len = old_rx_buffer_len;
+			pch_gbe_up(adapter);
+			return -ENOMEM;
+		} else {
+			netdev->mtu = new_mtu;
+			adapter->hw.mac.max_frame_size = max_frame;
+		}
+	} else {
 		pch_gbe_reset(adapter);
+		netdev->mtu = new_mtu;
+		adapter->hw.mac.max_frame_size = max_frame;
+	}
 
 	pr_debug("max_frame : %d  rx_buffer_len : %d  mtu : %d  max_frame_size : %d\n",
 		 max_frame, (u32) adapter->rx_buffer_len, netdev->mtu,
@@ -2099,33 +2168,39 @@
 {
 	struct pch_gbe_adapter *adapter =
 	    container_of(napi, struct pch_gbe_adapter, napi);
-	struct net_device *netdev = adapter->netdev;
 	int work_done = 0;
 	bool poll_end_flag = false;
 	bool cleaned = false;
+	u32 int_en;
 
 	pr_debug("budget : %d\n", budget);
 
-	/* Keep link state information with original netdev */
-	if (!netif_carrier_ok(netdev)) {
-		poll_end_flag = true;
-	} else {
-		cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
-		pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+	pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget);
+	cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring);
 
-		if (cleaned)
-			work_done = budget;
-		/* If no Tx and not enough Rx work done,
-		 * exit the polling mode
-		 */
-		if ((work_done < budget) || !netif_running(netdev))
-			poll_end_flag = true;
-	}
+	if (!cleaned)
+		work_done = budget;
+	/* If no Tx and not enough Rx work done,
+	 * exit the polling mode
+	 */
+	if (work_done < budget)
+		poll_end_flag = true;
 
 	if (poll_end_flag) {
 		napi_complete(napi);
+		if (adapter->rx_stop_flag) {
+			adapter->rx_stop_flag = false;
+			pch_gbe_start_receive(&adapter->hw);
+		}
 		pch_gbe_irq_enable(adapter);
-	}
+	} else
+		if (adapter->rx_stop_flag) {
+			adapter->rx_stop_flag = false;
+			pch_gbe_start_receive(&adapter->hw);
+			int_en = ioread32(&adapter->hw.reg->INT_EN);
+			iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR),
+				&adapter->hw.reg->INT_EN);
+		}
 
 	pr_debug("poll_end_flag : %d  work_done : %d  budget : %d\n",
 		 poll_end_flag, work_done, budget);
@@ -2452,6 +2527,13 @@
 	 .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
 	 .class_mask = (0xFFFF00)
 	 },
+	{.vendor = PCI_VENDOR_ID_ROHM,
+	 .device = PCI_DEVICE_ID_ROHM_ML7831_GBE,
+	 .subvendor = PCI_ANY_ID,
+	 .subdevice = PCI_ANY_ID,
+	 .class = (PCI_CLASS_NETWORK_ETHERNET << 8),
+	 .class_mask = (0xFFFF00)
+	 },
 	/* required last entry */
 	{0}
 };
diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index cb6e0b4..edd7304 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -589,7 +589,7 @@
 	prune_rx_ts(dp83640);
 
 	if (list_empty(&dp83640->rxpool)) {
-		pr_warning("dp83640: rx timestamp pool is empty\n");
+		pr_debug("dp83640: rx timestamp pool is empty\n");
 		goto out;
 	}
 	rxts = list_first_entry(&dp83640->rxpool, struct rxts, list);
@@ -612,7 +612,7 @@
 	skb = skb_dequeue(&dp83640->tx_queue);
 
 	if (!skb) {
-		pr_warning("dp83640: have timestamp but tx_queue empty\n");
+		pr_debug("dp83640: have timestamp but tx_queue empty\n");
 		return;
 	}
 	ns = phy2txts(phy_txts);
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index 10e5d98..edfa15d 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1465,7 +1465,12 @@
 			continue;
 		}
 
-		mtu = pch->chan->mtu - hdrlen;
+		/*
+		 * hdrlen includes the 2-byte PPP protocol field, but the
+		 * MTU counts only the payload excluding the protocol field.
+		 * (RFC1661 Section 2)
+		 */
+		mtu = pch->chan->mtu - (hdrlen - 2);
 		if (mtu < 4)
 			mtu = 4;
 		if (flen > mtu)
diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c
index 1a3033d..d17d062 100644
--- a/drivers/net/pxa168_eth.c
+++ b/drivers/net/pxa168_eth.c
@@ -40,6 +40,7 @@
 #include <linux/clk.h>
 #include <linux/phy.h>
 #include <linux/io.h>
+#include <linux/interrupt.h>
 #include <linux/types.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 02339b3..c236670 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -407,6 +407,7 @@
 	RxOK		= 0x0001,
 
 	/* RxStatusDesc */
+	RxBOVF	= (1 << 24),
 	RxFOVF	= (1 << 23),
 	RxRWT	= (1 << 22),
 	RxRES	= (1 << 21),
@@ -682,6 +683,7 @@
 	struct mii_if_info mii;
 	struct rtl8169_counters counters;
 	u32 saved_wolopts;
+	u32 opts1_mask;
 
 	struct rtl_fw {
 		const struct firmware *fw;
@@ -710,6 +712,7 @@
 MODULE_FIRMWARE(FIRMWARE_8168D_2);
 MODULE_FIRMWARE(FIRMWARE_8168E_1);
 MODULE_FIRMWARE(FIRMWARE_8168E_2);
+MODULE_FIRMWARE(FIRMWARE_8168E_3);
 MODULE_FIRMWARE(FIRMWARE_8105E_1);
 
 static int rtl8169_open(struct net_device *dev);
@@ -3077,6 +3080,14 @@
 	netif_err(tp, link, dev, "PHY reset failed\n");
 }
 
+static bool rtl_tbi_enabled(struct rtl8169_private *tp)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	return (tp->mac_version == RTL_GIGA_MAC_VER_01) &&
+	    (RTL_R8(PHYstatus) & TBI_Enable);
+}
+
 static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp)
 {
 	void __iomem *ioaddr = tp->mmio_addr;
@@ -3109,7 +3120,7 @@
 			   ADVERTISED_1000baseT_Half |
 			   ADVERTISED_1000baseT_Full : 0));
 
-	if (RTL_R8(PHYstatus) & TBI_Enable)
+	if (rtl_tbi_enabled(tp))
 		netif_info(tp, link, dev, "TBI auto-negotiating\n");
 }
 
@@ -3319,9 +3330,16 @@
 
 static void r810x_pll_power_down(struct rtl8169_private *tp)
 {
+	void __iomem *ioaddr = tp->mmio_addr;
+
 	if (__rtl8169_get_wol(tp) & WAKE_ANY) {
 		rtl_writephy(tp, 0x1f, 0x0000);
 		rtl_writephy(tp, MII_BMCR, 0x0000);
+
+		if (tp->mac_version == RTL_GIGA_MAC_VER_29 ||
+		    tp->mac_version == RTL_GIGA_MAC_VER_30)
+			RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
+				AcceptMulticast | AcceptMyPhys);
 		return;
 	}
 
@@ -3417,7 +3435,8 @@
 		rtl_writephy(tp, MII_BMCR, 0x0000);
 
 		if (tp->mac_version == RTL_GIGA_MAC_VER_32 ||
-		    tp->mac_version == RTL_GIGA_MAC_VER_33)
+		    tp->mac_version == RTL_GIGA_MAC_VER_33 ||
+		    tp->mac_version == RTL_GIGA_MAC_VER_34)
 			RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast |
 				AcceptMulticast | AcceptMyPhys);
 		return;
@@ -3727,8 +3746,7 @@
 	tp->features |= rtl_try_msi(pdev, ioaddr, cfg);
 	RTL_W8(Cfg9346, Cfg9346_Lock);
 
-	if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) &&
-	    (RTL_R8(PHYstatus) & TBI_Enable)) {
+	if (rtl_tbi_enabled(tp)) {
 		tp->set_speed = rtl8169_set_speed_tbi;
 		tp->get_settings = rtl8169_gset_tbi;
 		tp->phy_reset_enable = rtl8169_tbi_reset_enable;
@@ -3777,6 +3795,9 @@
 	tp->intr_event = cfg->intr_event;
 	tp->napi_event = cfg->napi_event;
 
+	tp->opts1_mask = (tp->mac_version != RTL_GIGA_MAC_VER_01) ?
+		~(RxBOVF | RxFOVF) : ~0;
+
 	init_timer(&tp->timer);
 	tp->timer.data = (unsigned long) dev;
 	tp->timer.function = rtl8169_phy_timer;
@@ -3988,6 +4009,7 @@
 		while (RTL_R8(TxPoll) & NPQ)
 			udelay(20);
 	} else if (tp->mac_version == RTL_GIGA_MAC_VER_34) {
+		RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq);
 		while (!(RTL_R32(TxConfig) & TXCFG_EMPTY))
 			udelay(100);
 	} else {
@@ -5314,7 +5336,7 @@
 		u32 status;
 
 		rmb();
-		status = le32_to_cpu(desc->opts1);
+		status = le32_to_cpu(desc->opts1) & tp->opts1_mask;
 
 		if (status & DescOwn)
 			break;
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index faca764..b59abc7 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -1050,7 +1050,6 @@
 {
 	struct pci_dev *pci_dev = efx->pci_dev;
 	dma_addr_t dma_mask = efx->type->max_dma_mask;
-	bool use_wc;
 	int rc;
 
 	netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n");
@@ -1101,21 +1100,8 @@
 		rc = -EIO;
 		goto fail3;
 	}
-
-	/* bug22643: If SR-IOV is enabled then tx push over a write combined
-	 * mapping is unsafe. We need to disable write combining in this case.
-	 * MSI is unsupported when SR-IOV is enabled, and the firmware will
-	 * have removed the MSI capability. So write combining is safe if
-	 * there is an MSI capability.
-	 */
-	use_wc = (!EFX_WORKAROUND_22643(efx) ||
-		  pci_find_capability(pci_dev, PCI_CAP_ID_MSI));
-	if (use_wc)
-		efx->membase = ioremap_wc(efx->membase_phys,
-					  efx->type->mem_map_size);
-	else
-		efx->membase = ioremap_nocache(efx->membase_phys,
-					       efx->type->mem_map_size);
+	efx->membase = ioremap_nocache(efx->membase_phys,
+				       efx->type->mem_map_size);
 	if (!efx->membase) {
 		netif_err(efx, probe, efx->net_dev,
 			  "could not map memory BAR at %llx+%x\n",
diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h
index cc97880..751d1ec 100644
--- a/drivers/net/sfc/io.h
+++ b/drivers/net/sfc/io.h
@@ -103,7 +103,6 @@
 	_efx_writed(efx, value->u32[2], reg + 8);
 	_efx_writed(efx, value->u32[3], reg + 12);
 #endif
-	wmb();
 	mmiowb();
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
 }
@@ -126,7 +125,6 @@
 	__raw_writel((__force u32)value->u32[0], membase + addr);
 	__raw_writel((__force u32)value->u32[1], membase + addr + 4);
 #endif
-	wmb();
 	mmiowb();
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
 }
@@ -141,7 +139,6 @@
 
 	/* No lock required */
 	_efx_writed(efx, value->u32[0], reg);
-	wmb();
 }
 
 /* Read a 128-bit CSR, locking as appropriate. */
@@ -152,7 +149,6 @@
 
 	spin_lock_irqsave(&efx->biu_lock, flags);
 	value->u32[0] = _efx_readd(efx, reg + 0);
-	rmb();
 	value->u32[1] = _efx_readd(efx, reg + 4);
 	value->u32[2] = _efx_readd(efx, reg + 8);
 	value->u32[3] = _efx_readd(efx, reg + 12);
@@ -175,7 +171,6 @@
 	value->u64[0] = (__force __le64)__raw_readq(membase + addr);
 #else
 	value->u32[0] = (__force __le32)__raw_readl(membase + addr);
-	rmb();
 	value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4);
 #endif
 	spin_unlock_irqrestore(&efx->biu_lock, flags);
@@ -249,7 +244,6 @@
 	_efx_writed(efx, value->u32[2], reg + 8);
 	_efx_writed(efx, value->u32[3], reg + 12);
 #endif
-	wmb();
 }
 #define efx_writeo_page(efx, value, reg, page)				\
 	_efx_writeo_page(efx, value,					\
diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c
index 3dd45ed..81a4253 100644
--- a/drivers/net/sfc/mcdi.c
+++ b/drivers/net/sfc/mcdi.c
@@ -50,20 +50,6 @@
 	return &nic_data->mcdi;
 }
 
-static inline void
-efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg)
-{
-	struct siena_nic_data *nic_data = efx->nic_data;
-	value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg);
-}
-
-static inline void
-efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg)
-{
-	struct siena_nic_data *nic_data = efx->nic_data;
-	__raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg);
-}
-
 void efx_mcdi_init(struct efx_nic *efx)
 {
 	struct efx_mcdi_iface *mcdi;
@@ -84,8 +70,8 @@
 			    const u8 *inbuf, size_t inlen)
 {
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
-	unsigned pdu = MCDI_PDU(efx);
-	unsigned doorbell = MCDI_DOORBELL(efx);
+	unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
+	unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx);
 	unsigned int i;
 	efx_dword_t hdr;
 	u32 xflags, seqno;
@@ -106,28 +92,29 @@
 			     MCDI_HEADER_SEQ, seqno,
 			     MCDI_HEADER_XFLAGS, xflags);
 
-	efx_mcdi_writed(efx, &hdr, pdu);
+	efx_writed(efx, &hdr, pdu);
 
 	for (i = 0; i < inlen; i += 4)
-		efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i),
-				pdu + 4 + i);
+		_efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i);
+
+	/* Ensure the payload is written out before the header */
+	wmb();
 
 	/* ring the doorbell with a distinctive value */
-	EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc);
-	efx_mcdi_writed(efx, &hdr, doorbell);
+	_efx_writed(efx, (__force __le32) 0x45789abc, doorbell);
 }
 
 static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen)
 {
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
-	unsigned int pdu = MCDI_PDU(efx);
+	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
 	int i;
 
 	BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT);
 	BUG_ON(outlen & 3 || outlen >= 0x100);
 
 	for (i = 0; i < outlen; i += 4)
-		efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i);
+		*((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i);
 }
 
 static int efx_mcdi_poll(struct efx_nic *efx)
@@ -135,7 +122,7 @@
 	struct efx_mcdi_iface *mcdi = efx_mcdi(efx);
 	unsigned int time, finish;
 	unsigned int respseq, respcmd, error;
-	unsigned int pdu = MCDI_PDU(efx);
+	unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx);
 	unsigned int rc, spins;
 	efx_dword_t reg;
 
@@ -161,7 +148,8 @@
 
 		time = get_seconds();
 
-		efx_mcdi_readd(efx, &reg, pdu);
+		rmb();
+		efx_readd(efx, &reg, pdu);
 
 		/* All 1's indicates that shared memory is in reset (and is
 		 * not a valid header). Wait for it to come out reset before
@@ -188,7 +176,7 @@
 			  respseq, mcdi->seqno);
 		rc = EIO;
 	} else if (error) {
-		efx_mcdi_readd(efx, &reg, pdu + 4);
+		efx_readd(efx, &reg, pdu + 4);
 		switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) {
 #define TRANSLATE_ERROR(name)					\
 		case MC_CMD_ERR_ ## name:			\
@@ -222,21 +210,21 @@
 /* Test and clear MC-rebooted flag for this port/function */
 int efx_mcdi_poll_reboot(struct efx_nic *efx)
 {
-	unsigned int addr = MCDI_REBOOT_FLAG(efx);
+	unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx);
 	efx_dword_t reg;
 	uint32_t value;
 
 	if (efx_nic_rev(efx) < EFX_REV_SIENA_A0)
 		return false;
 
-	efx_mcdi_readd(efx, &reg, addr);
+	efx_readd(efx, &reg, addr);
 	value = EFX_DWORD_FIELD(reg, EFX_DWORD_0);
 
 	if (value == 0)
 		return 0;
 
 	EFX_ZERO_DWORD(reg);
-	efx_mcdi_writed(efx, &reg, addr);
+	efx_writed(efx, &reg, addr);
 
 	if (value == MC_STATUS_DWORD_ASSERT)
 		return -EINTR;
diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c
index bafa23a..3edfbaf 100644
--- a/drivers/net/sfc/nic.c
+++ b/drivers/net/sfc/nic.c
@@ -1936,13 +1936,6 @@
 
 		size = min_t(size_t, table->step, 16);
 
-		if (table->offset >= efx->type->mem_map_size) {
-			/* No longer mapped; return dummy data */
-			memcpy(buf, "\xde\xc0\xad\xde", 4);
-			buf += table->rows * size;
-			continue;
-		}
-
 		for (i = 0; i < table->rows; i++) {
 			switch (table->step) {
 			case 4: /* 32-bit register or SRAM */
diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h
index 4bd1f28..7443f99 100644
--- a/drivers/net/sfc/nic.h
+++ b/drivers/net/sfc/nic.h
@@ -143,12 +143,10 @@
 /**
  * struct siena_nic_data - Siena NIC state
  * @mcdi: Management-Controller-to-Driver Interface
- * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable.
  * @wol_filter_id: Wake-on-LAN packet filter id
  */
 struct siena_nic_data {
 	struct efx_mcdi_iface mcdi;
-	void __iomem *mcdi_smem;
 	int wol_filter_id;
 };
 
diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c
index 5735e84..2c3bd93 100644
--- a/drivers/net/sfc/siena.c
+++ b/drivers/net/sfc/siena.c
@@ -250,26 +250,12 @@
 	efx_reado(efx, &reg, FR_AZ_CS_DEBUG);
 	efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1;
 
-	/* Initialise MCDI */
-	nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys +
-					      FR_CZ_MC_TREG_SMEM,
-					      FR_CZ_MC_TREG_SMEM_STEP *
-					      FR_CZ_MC_TREG_SMEM_ROWS);
-	if (!nic_data->mcdi_smem) {
-		netif_err(efx, probe, efx->net_dev,
-			  "could not map MCDI at %llx+%x\n",
-			  (unsigned long long)efx->membase_phys +
-			  FR_CZ_MC_TREG_SMEM,
-			  FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS);
-		rc = -ENOMEM;
-		goto fail1;
-	}
 	efx_mcdi_init(efx);
 
 	/* Recover from a failed assertion before probing */
 	rc = efx_mcdi_handle_assertion(efx);
 	if (rc)
-		goto fail2;
+		goto fail1;
 
 	/* Let the BMC know that the driver is now in charge of link and
 	 * filter settings. We must do this before we reset the NIC */
@@ -324,7 +310,6 @@
 fail3:
 	efx_mcdi_drv_attach(efx, false, NULL);
 fail2:
-	iounmap(nic_data->mcdi_smem);
 fail1:
 	kfree(efx->nic_data);
 	return rc;
@@ -404,8 +389,6 @@
 
 static void siena_remove_nic(struct efx_nic *efx)
 {
-	struct siena_nic_data *nic_data = efx->nic_data;
-
 	efx_nic_free_buffer(efx, &efx->irq_status);
 
 	siena_reset_hw(efx, RESET_TYPE_ALL);
@@ -415,8 +398,7 @@
 		efx_mcdi_drv_attach(efx, false, NULL);
 
 	/* Tear down the private nic state */
-	iounmap(nic_data->mcdi_smem);
-	kfree(nic_data);
+	kfree(efx->nic_data);
 	efx->nic_data = NULL;
 }
 
@@ -656,7 +638,8 @@
 	.default_mac_ops = &efx_mcdi_mac_operations,
 
 	.revision = EFX_REV_SIENA_A0,
-	.mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */
+	.mem_map_size = (FR_CZ_MC_TREG_SMEM +
+			 FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS),
 	.txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL,
 	.rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL,
 	.buf_tbl_base = FR_BZ_BUF_FULL_TBL,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index 99ff114..e4dd3a7 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -38,8 +38,6 @@
 #define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS
 /* Legacy interrupt storm when interrupt fifo fills */
 #define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA
-/* Write combining and sriov=enabled are incompatible */
-#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA
 
 /* Spurious parity errors in TSORT buffers */
 #define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index dc3fbf6..4a1374d 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -6234,12 +6234,10 @@
 		}
 	}
 
-#ifdef BCM_KERNEL_SUPPORTS_8021Q
 	if (vlan_tx_tag_present(skb)) {
 		base_flags |= TXD_FLAG_VLAN;
 		vlan = vlan_tx_tag_get(skb);
 	}
-#endif
 
 	if (tg3_flag(tp, USE_JUMBO_BDFLAG) &&
 	    !mss && skb->len > VLAN_ETH_FRAME_LEN)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 15772b1..13c1f04 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -59,6 +59,7 @@
 #define USB_PRODUCT_IPHONE_3G   0x1292
 #define USB_PRODUCT_IPHONE_3GS  0x1294
 #define USB_PRODUCT_IPHONE_4	0x1297
+#define USB_PRODUCT_IPHONE_4_VZW 0x129c
 
 #define IPHETH_USBINTF_CLASS    255
 #define IPHETH_USBINTF_SUBCLASS 253
@@ -98,6 +99,10 @@
 		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4,
 		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
 		IPHETH_USBINTF_PROTO) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(
+		USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW,
+		IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS,
+		IPHETH_USBINTF_PROTO) },
 	{ }
 };
 MODULE_DEVICE_TABLE(usb, ipheth_table);
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index 2d4c091..2d394af 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -41,7 +41,8 @@
 	case ADC_DC_CAL:
 		/* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */
 		if (!IS_CHAN_B(chan) &&
-		    !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan)))
+		    !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) &&
+		      IS_CHAN_HT20(chan)))
 			supported = true;
 		break;
 	}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
index 2339728..3e69c63 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
+++ b/drivers/net/wireless/ath/ath9k/ar9003_2p2_initvals.h
@@ -1514,7 +1514,7 @@
 	{0x00008258, 0x00000000},
 	{0x0000825c, 0x40000000},
 	{0x00008260, 0x00080922},
-	{0x00008264, 0x9bc00010},
+	{0x00008264, 0x9d400010},
 	{0x00008268, 0xffffffff},
 	{0x0000826c, 0x0000ffff},
 	{0x00008270, 0x00000000},
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
index 1baca8e..fcafec0 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c
@@ -671,7 +671,7 @@
 		REG_WRITE_ARRAY(&ah->iniModesAdditional,
 				modesIndex, regWrites);
 
-	if (AR_SREV_9300(ah))
+	if (AR_SREV_9330(ah))
 		REG_WRITE_ARRAY(&ah->iniModesAdditional, 1, regWrites);
 
 	if (AR_SREV_9340(ah) && !ah->is_clk_25mhz)
diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c
index 6530694..722967b 100644
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
@@ -2303,6 +2303,12 @@
 	mutex_lock(&sc->mutex);
 	cancel_delayed_work_sync(&sc->tx_complete_work);
 
+	if (ah->ah_flags & AH_UNPLUGGED) {
+		ath_dbg(common, ATH_DBG_ANY, "Device has been unplugged!\n");
+		mutex_unlock(&sc->mutex);
+		return;
+	}
+
 	if (sc->sc_flags & SC_OP_INVALID) {
 		ath_dbg(common, ATH_DBG_ANY, "Device not present\n");
 		mutex_unlock(&sc->mutex);
diff --git a/drivers/net/wireless/ath/ath9k/recv.c b/drivers/net/wireless/ath/ath9k/recv.c
index 9a48501..4c21f8c 100644
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -205,14 +205,22 @@
 
 static void ath_rx_edma_cleanup(struct ath_softc *sc)
 {
+	struct ath_hw *ah = sc->sc_ah;
+	struct ath_common *common = ath9k_hw_common(ah);
 	struct ath_buf *bf;
 
 	ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_LP);
 	ath_rx_remove_buffer(sc, ATH9K_RX_QUEUE_HP);
 
 	list_for_each_entry(bf, &sc->rx.rxbuf, list) {
-		if (bf->bf_mpdu)
+		if (bf->bf_mpdu) {
+			dma_unmap_single(sc->dev, bf->bf_buf_addr,
+					common->rx_bufsize,
+					DMA_BIDIRECTIONAL);
 			dev_kfree_skb_any(bf->bf_mpdu);
+			bf->bf_buf_addr = 0;
+			bf->bf_mpdu = NULL;
+		}
 	}
 
 	INIT_LIST_HEAD(&sc->rx.rxbuf);
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 26f1ab8..e293a79 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1632,7 +1632,8 @@
 	u32 cmd, beacon0_valid, beacon1_valid;
 
 	if (!b43_is_mode(wl, NL80211_IFTYPE_AP) &&
-	    !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT))
+	    !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) &&
+	    !b43_is_mode(wl, NL80211_IFTYPE_ADHOC))
 		return;
 
 	/* This is the bottom half of the asynchronous beacon update. */
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index 3774dd0..ef9ad79 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -1903,15 +1903,17 @@
 static int ipw2100_net_init(struct net_device *dev)
 {
 	struct ipw2100_priv *priv = libipw_priv(dev);
+
+	return ipw2100_up(priv, 1);
+}
+
+static int ipw2100_wdev_init(struct net_device *dev)
+{
+	struct ipw2100_priv *priv = libipw_priv(dev);
 	const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
 	struct wireless_dev *wdev = &priv->ieee->wdev;
-	int ret;
 	int i;
 
-	ret = ipw2100_up(priv, 1);
-	if (ret)
-		return ret;
-
 	memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
 
 	/* fill-out priv->ieee->bg_band */
@@ -6350,9 +6352,13 @@
 		       "Error calling register_netdev.\n");
 		goto fail;
 	}
+	registered = 1;
+
+	err = ipw2100_wdev_init(dev);
+	if (err)
+		goto fail;
 
 	mutex_lock(&priv->action_mutex);
-	registered = 1;
 
 	IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
 
@@ -6389,7 +6395,8 @@
 
       fail_unlock:
 	mutex_unlock(&priv->action_mutex);
-
+	wiphy_unregister(priv->ieee->wdev.wiphy);
+	kfree(priv->ieee->bg_band.channels);
       fail:
 	if (dev) {
 		if (registered)
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 87813c3..4ffebed 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -11425,16 +11425,23 @@
 /* Called by register_netdev() */
 static int ipw_net_init(struct net_device *dev)
 {
+	int rc = 0;
+	struct ipw_priv *priv = libipw_priv(dev);
+
+	mutex_lock(&priv->mutex);
+	if (ipw_up(priv))
+		rc = -EIO;
+	mutex_unlock(&priv->mutex);
+
+	return rc;
+}
+
+static int ipw_wdev_init(struct net_device *dev)
+{
 	int i, rc = 0;
 	struct ipw_priv *priv = libipw_priv(dev);
 	const struct libipw_geo *geo = libipw_get_geo(priv->ieee);
 	struct wireless_dev *wdev = &priv->ieee->wdev;
-	mutex_lock(&priv->mutex);
-
-	if (ipw_up(priv)) {
-		rc = -EIO;
-		goto out;
-	}
 
 	memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN);
 
@@ -11519,13 +11526,9 @@
 	set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev);
 
 	/* With that information in place, we can now register the wiphy... */
-	if (wiphy_register(wdev->wiphy)) {
+	if (wiphy_register(wdev->wiphy))
 		rc = -EIO;
-		goto out;
-	}
-
 out:
-	mutex_unlock(&priv->mutex);
 	return rc;
 }
 
@@ -11832,14 +11835,22 @@
 		goto out_remove_sysfs;
 	}
 
+	err = ipw_wdev_init(net_dev);
+	if (err) {
+		IPW_ERROR("failed to register wireless device\n");
+		goto out_unregister_netdev;
+	}
+
 #ifdef CONFIG_IPW2200_PROMISCUOUS
 	if (rtap_iface) {
 	        err = ipw_prom_alloc(priv);
 		if (err) {
 			IPW_ERROR("Failed to register promiscuous network "
 				  "device (error %d).\n", err);
-			unregister_netdev(priv->net_dev);
-			goto out_remove_sysfs;
+			wiphy_unregister(priv->ieee->wdev.wiphy);
+			kfree(priv->ieee->a_band.channels);
+			kfree(priv->ieee->bg_band.channels);
+			goto out_unregister_netdev;
 		}
 	}
 #endif
@@ -11851,6 +11862,8 @@
 
 	return 0;
 
+      out_unregister_netdev:
+	unregister_netdev(priv->net_dev);
       out_remove_sysfs:
 	sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group);
       out_release_irq:
diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
index 977bd24..164bcae 100644
--- a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c
@@ -822,12 +822,15 @@
 
  out:
 
-	rs_sta->last_txrate_idx = index;
-	if (sband->band == IEEE80211_BAND_5GHZ)
-		info->control.rates[0].idx = rs_sta->last_txrate_idx -
-				IWL_FIRST_OFDM_RATE;
-	else
+	if (sband->band == IEEE80211_BAND_5GHZ) {
+		if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE))
+			index = IWL_FIRST_OFDM_RATE;
+		rs_sta->last_txrate_idx = index;
+		info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE;
+	} else {
+		rs_sta->last_txrate_idx = index;
 		info->control.rates[0].idx = rs_sta->last_txrate_idx;
+	}
 
 	IWL_DEBUG_RATE(priv, "leave: %d\n", index);
 }
diff --git a/drivers/net/wireless/iwlegacy/iwl-core.c b/drivers/net/wireless/iwlegacy/iwl-core.c
index 35cd2537..e5971fe 100644
--- a/drivers/net/wireless/iwlegacy/iwl-core.c
+++ b/drivers/net/wireless/iwlegacy/iwl-core.c
@@ -937,7 +937,7 @@
 					&priv->contexts[IWL_RXON_CTX_BSS]);
 #endif
 
-	wake_up_interruptible(&priv->wait_command_queue);
+	wake_up(&priv->wait_command_queue);
 
 	/* Keep the restart process from trying to send host
 	 * commands by clearing the INIT status bit */
@@ -1746,7 +1746,7 @@
 
 	/* Set the FW error flag -- cleared on iwl_down */
 	set_bit(STATUS_FW_ERROR, &priv->status);
-	wake_up_interruptible(&priv->wait_command_queue);
+	wake_up(&priv->wait_command_queue);
 	/*
 	 * Keep the restart process from trying to send host
 	 * commands by clearing the INIT status bit
diff --git a/drivers/net/wireless/iwlegacy/iwl-hcmd.c b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
index 62b4b09..ce1fc9f 100644
--- a/drivers/net/wireless/iwlegacy/iwl-hcmd.c
+++ b/drivers/net/wireless/iwlegacy/iwl-hcmd.c
@@ -167,7 +167,7 @@
 		goto out;
 	}
 
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+	ret = wait_event_timeout(priv->wait_command_queue,
 			!test_bit(STATUS_HCMD_ACTIVE, &priv->status),
 			HOST_COMPLETE_TIMEOUT);
 	if (!ret) {
diff --git a/drivers/net/wireless/iwlegacy/iwl-tx.c b/drivers/net/wireless/iwlegacy/iwl-tx.c
index 4fff995..ef9e268 100644
--- a/drivers/net/wireless/iwlegacy/iwl-tx.c
+++ b/drivers/net/wireless/iwlegacy/iwl-tx.c
@@ -625,6 +625,8 @@
 	cmd = txq->cmd[cmd_index];
 	meta = &txq->meta[cmd_index];
 
+	txq->time_stamp = jiffies;
+
 	pci_unmap_single(priv->pci_dev,
 			 dma_unmap_addr(meta, mapping),
 			 dma_unmap_len(meta, len),
@@ -645,7 +647,7 @@
 		clear_bit(STATUS_HCMD_ACTIVE, &priv->status);
 		IWL_DEBUG_INFO(priv, "Clearing HCMD_ACTIVE for command %s\n",
 			       iwl_legacy_get_cmd_string(cmd->hdr.cmd));
-		wake_up_interruptible(&priv->wait_command_queue);
+		wake_up(&priv->wait_command_queue);
 	}
 
 	/* Mark as unmapped */
diff --git a/drivers/net/wireless/iwlegacy/iwl3945-base.c b/drivers/net/wireless/iwlegacy/iwl3945-base.c
index 795826a..66ee1562 100644
--- a/drivers/net/wireless/iwlegacy/iwl3945-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl3945-base.c
@@ -841,7 +841,7 @@
 		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
 				test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
-		wake_up_interruptible(&priv->wait_command_queue);
+		wake_up(&priv->wait_command_queue);
 }
 
 /**
@@ -2269,7 +2269,7 @@
 	iwl3945_reg_txpower_periodic(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
-	wake_up_interruptible(&priv->wait_command_queue);
+	wake_up(&priv->wait_command_queue);
 
 	return;
 
@@ -2300,7 +2300,7 @@
 	iwl_legacy_clear_driver_stations(priv);
 
 	/* Unblock any waiting calls */
-	wake_up_interruptible_all(&priv->wait_command_queue);
+	wake_up_all(&priv->wait_command_queue);
 
 	/* Wipe out the EXIT_PENDING status bit if we are not actually
 	 * exiting the module */
@@ -2853,7 +2853,7 @@
 
 	/* Wait for START_ALIVE from ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+	ret = wait_event_timeout(priv->wait_command_queue,
 			test_bit(STATUS_READY, &priv->status),
 			UCODE_READY_TIMEOUT);
 	if (!ret) {
diff --git a/drivers/net/wireless/iwlegacy/iwl4965-base.c b/drivers/net/wireless/iwlegacy/iwl4965-base.c
index 1433466..aa0c253 100644
--- a/drivers/net/wireless/iwlegacy/iwl4965-base.c
+++ b/drivers/net/wireless/iwlegacy/iwl4965-base.c
@@ -576,7 +576,7 @@
 		wiphy_rfkill_set_hw_state(priv->hw->wiphy,
 			test_bit(STATUS_RF_KILL_HW, &priv->status));
 	else
-		wake_up_interruptible(&priv->wait_command_queue);
+		wake_up(&priv->wait_command_queue);
 }
 
 /**
@@ -926,7 +926,7 @@
 		handled |= CSR_INT_BIT_FH_TX;
 		/* Wake up uCode load routine, now that load is complete */
 		priv->ucode_write_complete = 1;
-		wake_up_interruptible(&priv->wait_command_queue);
+		wake_up(&priv->wait_command_queue);
 	}
 
 	if (inta & ~handled) {
@@ -1795,7 +1795,7 @@
 	iwl4965_rf_kill_ct_config(priv);
 
 	IWL_DEBUG_INFO(priv, "ALIVE processing complete.\n");
-	wake_up_interruptible(&priv->wait_command_queue);
+	wake_up(&priv->wait_command_queue);
 
 	iwl_legacy_power_update_mode(priv, true);
 	IWL_DEBUG_INFO(priv, "Updated power mode\n");
@@ -1828,7 +1828,7 @@
 	iwl_legacy_clear_driver_stations(priv);
 
 	/* Unblock any waiting calls */
-	wake_up_interruptible_all(&priv->wait_command_queue);
+	wake_up_all(&priv->wait_command_queue);
 
 	/* Wipe out the EXIT_PENDING status bit if we are not actually
 	 * exiting the module */
@@ -2266,7 +2266,7 @@
 
 	/* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
 	 * mac80211 will not be run successfully. */
-	ret = wait_event_interruptible_timeout(priv->wait_command_queue,
+	ret = wait_event_timeout(priv->wait_command_queue,
 			test_bit(STATUS_READY, &priv->status),
 			UCODE_READY_TIMEOUT);
 	if (!ret) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
index a895a09..5621100 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c
@@ -167,7 +167,7 @@
 
 	memset(&cmd, 0, sizeof(cmd));
 	iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD);
-	memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(offset_calib));
+	memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib));
 	if (!(cmd.radio_sensor_offset))
 		cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET;
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index b0ae4de..f9c3cd9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2140,7 +2140,12 @@
 		    IEEE80211_HW_SPECTRUM_MGMT |
 		    IEEE80211_HW_REPORTS_TX_ACK_STATUS;
 
+	/*
+	 * Including the following line will crash some AP's.  This
+	 * workaround removes the stimulus which causes the crash until
+	 * the AP software can be fixed.
 	hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF;
+	 */
 
 	hw->flags |= IEEE80211_HW_SUPPORTS_PS |
 		     IEEE80211_HW_SUPPORTS_DYNAMIC_PS;
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index dd6937e..77e528f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -405,31 +405,33 @@
 
 	mutex_lock(&priv->mutex);
 
-	if (test_bit(STATUS_SCANNING, &priv->status) &&
-	    priv->scan_type != IWL_SCAN_NORMAL) {
-		IWL_DEBUG_SCAN(priv, "Scan already in progress.\n");
-		ret = -EAGAIN;
-		goto out_unlock;
-	}
-
-	/* mac80211 will only ask for one band at a time */
-	priv->scan_request = req;
-	priv->scan_vif = vif;
-
 	/*
 	 * If an internal scan is in progress, just set
 	 * up the scan_request as per above.
 	 */
 	if (priv->scan_type != IWL_SCAN_NORMAL) {
-		IWL_DEBUG_SCAN(priv, "SCAN request during internal scan\n");
+		IWL_DEBUG_SCAN(priv,
+			       "SCAN request during internal scan - defer\n");
+		priv->scan_request = req;
+		priv->scan_vif = vif;
 		ret = 0;
-	} else
+	} else {
+		priv->scan_request = req;
+		priv->scan_vif = vif;
+		/*
+		 * mac80211 will only ask for one band at a time
+		 * so using channels[0] here is ok
+		 */
 		ret = iwl_scan_initiate(priv, vif, IWL_SCAN_NORMAL,
 					req->channels[0]->band);
+		if (ret) {
+			priv->scan_request = NULL;
+			priv->scan_vif = NULL;
+		}
+	}
 
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 
-out_unlock:
 	mutex_unlock(&priv->mutex);
 
 	return ret;
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
index a6b2b1d..222d410 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
@@ -771,6 +771,8 @@
 	cmd = txq->cmd[cmd_index];
 	meta = &txq->meta[cmd_index];
 
+	txq->time_stamp = jiffies;
+
 	iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL);
 
 	/* Input error checking is done when commands are added to queue. */
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index ef67f67..0019dfd 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -3697,14 +3697,15 @@
 	rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, &reg);
 
 	/* Apparently the data is read from end to start */
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3,
-					(u32 *)&rt2x00dev->eeprom[i]);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2,
-					(u32 *)&rt2x00dev->eeprom[i + 2]);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1,
-					(u32 *)&rt2x00dev->eeprom[i + 4]);
-	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0,
-					(u32 *)&rt2x00dev->eeprom[i + 6]);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, &reg);
+	/* The returned value is in CPU order, but eeprom is le */
+	rt2x00dev->eeprom[i] = cpu_to_le32(reg);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, &reg);
+	*(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, &reg);
+	*(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg);
+	rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, &reg);
+	*(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg);
 
 	mutex_unlock(&rt2x00dev->csr_mutex);
 }
@@ -3870,19 +3871,23 @@
 		return -ENODEV;
 	}
 
-	if (!rt2x00_rf(rt2x00dev, RF2820) &&
-	    !rt2x00_rf(rt2x00dev, RF2850) &&
-	    !rt2x00_rf(rt2x00dev, RF2720) &&
-	    !rt2x00_rf(rt2x00dev, RF2750) &&
-	    !rt2x00_rf(rt2x00dev, RF3020) &&
-	    !rt2x00_rf(rt2x00dev, RF2020) &&
-	    !rt2x00_rf(rt2x00dev, RF3021) &&
-	    !rt2x00_rf(rt2x00dev, RF3022) &&
-	    !rt2x00_rf(rt2x00dev, RF3052) &&
-	    !rt2x00_rf(rt2x00dev, RF3320) &&
-	    !rt2x00_rf(rt2x00dev, RF5370) &&
-	    !rt2x00_rf(rt2x00dev, RF5390)) {
-		ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
+	switch (rt2x00dev->chip.rf) {
+	case RF2820:
+	case RF2850:
+	case RF2720:
+	case RF2750:
+	case RF3020:
+	case RF2020:
+	case RF3021:
+	case RF3022:
+	case RF3052:
+	case RF3320:
+	case RF5370:
+	case RF5390:
+		break;
+	default:
+		ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n",
+		      rt2x00dev->chip.rf);
 		return -ENODEV;
 	}
 
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index 1bdc1aa..04c4e9e 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -610,6 +610,11 @@
 
 			mac->link_state = MAC80211_NOLINK;
 			memset(mac->bssid, 0, 6);
+
+			/* reset sec info */
+			rtl_cam_reset_sec_info(hw);
+
+			rtl_cam_reset_all_entry(hw);
 			mac->vendor = PEER_UNKNOWN;
 
 			RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
@@ -1063,6 +1068,9 @@
 		 *or clear all entry here.
 		 */
 		rtl_cam_delete_one_entry(hw, mac_addr, key_idx);
+
+		rtl_cam_reset_sec_info(hw);
+
 		break;
 	default:
 		RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
index 906e7aa..3e52a54 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c
@@ -549,15 +549,16 @@
 			       (tcb_desc->rts_use_shortpreamble ? 1 : 0)
 			       : (tcb_desc->rts_use_shortgi ? 1 : 0)));
 	if (mac->bw_40) {
-		if (tcb_desc->packet_bw) {
+		if (rate_flag & IEEE80211_TX_RC_DUP_DATA) {
 			SET_TX_DESC_DATA_BW(txdesc, 1);
 			SET_TX_DESC_DATA_SC(txdesc, 3);
+		} else if(rate_flag & IEEE80211_TX_RC_40_MHZ_WIDTH){
+			SET_TX_DESC_DATA_BW(txdesc, 1);
+			SET_TX_DESC_DATA_SC(txdesc, mac->cur_40_prime_sc);
 		} else {
 			SET_TX_DESC_DATA_BW(txdesc, 0);
-				if (rate_flag & IEEE80211_TX_RC_DUP_DATA)
-					SET_TX_DESC_DATA_SC(txdesc,
-							  mac->cur_40_prime_sc);
-			}
+			SET_TX_DESC_DATA_SC(txdesc, 0);
+		}
 	} else {
 		SET_TX_DESC_DATA_BW(txdesc, 0);
 		SET_TX_DESC_DATA_SC(txdesc, 0);
diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c
index 8b1cef0..4bf3cf4 100644
--- a/drivers/net/wireless/rtlwifi/usb.c
+++ b/drivers/net/wireless/rtlwifi/usb.c
@@ -863,6 +863,7 @@
 	u8 tid = 0;
 	u16 seq_number = 0;
 
+	memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc));
 	if (ieee80211_is_auth(fc)) {
 		RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, ("MAC80211_LINKING\n"));
 		rtl_ips_nic_on(hw);
diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c
index 0ca86f9..1825629 100644
--- a/drivers/net/xen-netback/interface.c
+++ b/drivers/net/xen-netback/interface.c
@@ -327,12 +327,12 @@
 	xenvif_get(vif);
 
 	rtnl_lock();
-	if (netif_running(vif->dev))
-		xenvif_up(vif);
 	if (!vif->can_sg && vif->dev->mtu > ETH_DATA_LEN)
 		dev_set_mtu(vif->dev, ETH_DATA_LEN);
 	netdev_update_features(vif->dev);
 	netif_carrier_on(vif->dev);
+	if (netif_running(vif->dev))
+		xenvif_up(vif);
 	rtnl_unlock();
 
 	return 0;
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 4e84fd4..e9651f0 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -77,7 +77,7 @@
 unsigned long pci_hotplug_io_size  = DEFAULT_HOTPLUG_IO_SIZE;
 unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
 
-enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_SAFE;
+enum pcie_bus_config_types pcie_bus_config = PCIE_BUS_TUNE_OFF;
 
 /*
  * The default CLS is used if arch didn't set CLS explicitly and not
@@ -3568,10 +3568,14 @@
 				pci_hotplug_io_size = memparse(str + 9, &str);
 			} else if (!strncmp(str, "hpmemsize=", 10)) {
 				pci_hotplug_mem_size = memparse(str + 10, &str);
+			} else if (!strncmp(str, "pcie_bus_tune_off", 17)) {
+				pcie_bus_config = PCIE_BUS_TUNE_OFF;
 			} else if (!strncmp(str, "pcie_bus_safe", 13)) {
 				pcie_bus_config = PCIE_BUS_SAFE;
 			} else if (!strncmp(str, "pcie_bus_perf", 13)) {
 				pcie_bus_config = PCIE_BUS_PERFORMANCE;
+			} else if (!strncmp(str, "pcie_bus_peer2peer", 18)) {
+				pcie_bus_config = PCIE_BUS_PEER2PEER;
 			} else {
 				printk(KERN_ERR "PCI: Unknown option `%s'\n",
 						str);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index b1187ff..6ab6bd3 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1351,7 +1351,8 @@
 	 * will occur as normal.
 	 */
 	if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) ||
-	    dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))
+	     (dev->bus->self &&
+	      dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)))
 		*smpss = 0;
 
 	if (*smpss > dev->pcie_mpss)
@@ -1457,12 +1458,24 @@
  */
 void pcie_bus_configure_settings(struct pci_bus *bus, u8 mpss)
 {
-	u8 smpss = mpss;
+	u8 smpss;
 
 	if (!pci_is_pcie(bus->self))
 		return;
 
+	if (pcie_bus_config == PCIE_BUS_TUNE_OFF)
+		return;
+
+	/* FIXME - Peer to peer DMA is possible, though the endpoint would need
+	 * to be aware to the MPS of the destination.  To work around this,
+	 * simply force the MPS of the entire system to the smallest possible.
+	 */
+	if (pcie_bus_config == PCIE_BUS_PEER2PEER)
+		smpss = 0;
+
 	if (pcie_bus_config == PCIE_BUS_SAFE) {
+		smpss = mpss;
+
 		pcie_find_smpss(bus->self, &smpss);
 		pci_walk_bus(bus, pcie_find_smpss, &smpss);
 	}
diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
index e956f65..66ab92c 100644
--- a/drivers/pcmcia/pxa2xx_vpac270.c
+++ b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -17,7 +17,7 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/vpac270.h>
 
 #include "soc_common.h"
diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c
index 2dd3c01..d93a960 100644
--- a/drivers/rtc/rtc-imxdi.c
+++ b/drivers/rtc/rtc-imxdi.c
@@ -35,6 +35,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/rtc.h>
+#include <linux/sched.h>
 #include <linux/workqueue.h>
 
 /* DryIce Register Definitions */
diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c
index 4e7c04e..7639ab9 100644
--- a/drivers/rtc/rtc-s3c.c
+++ b/drivers/rtc/rtc-s3c.c
@@ -51,6 +51,27 @@
 
 static DEFINE_SPINLOCK(s3c_rtc_pie_lock);
 
+static void s3c_rtc_alarm_clk_enable(bool enable)
+{
+	static DEFINE_SPINLOCK(s3c_rtc_alarm_clk_lock);
+	static bool alarm_clk_enabled;
+	unsigned long irq_flags;
+
+	spin_lock_irqsave(&s3c_rtc_alarm_clk_lock, irq_flags);
+	if (enable) {
+		if (!alarm_clk_enabled) {
+			clk_enable(rtc_clk);
+			alarm_clk_enabled = true;
+		}
+	} else {
+		if (alarm_clk_enabled) {
+			clk_disable(rtc_clk);
+			alarm_clk_enabled = false;
+		}
+	}
+	spin_unlock_irqrestore(&s3c_rtc_alarm_clk_lock, irq_flags);
+}
+
 /* IRQ Handlers */
 
 static irqreturn_t s3c_rtc_alarmirq(int irq, void *id)
@@ -64,6 +85,9 @@
 		writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP);
 
 	clk_disable(rtc_clk);
+
+	s3c_rtc_alarm_clk_enable(false);
+
 	return IRQ_HANDLED;
 }
 
@@ -97,6 +121,8 @@
 	writeb(tmp, s3c_rtc_base + S3C2410_RTCALM);
 	clk_disable(rtc_clk);
 
+	s3c_rtc_alarm_clk_enable(enabled);
+
 	return 0;
 }
 
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index cbde448..eb3140e 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -654,8 +654,8 @@
 static int console_subchannel_in_use;
 
 /*
- * Use tpi to get a pending interrupt, call the interrupt handler and
- * return a pointer to the subchannel structure.
+ * Use cio_tpi to get a pending interrupt and call the interrupt handler.
+ * Return non-zero if an interrupt was processed, zero otherwise.
  */
 static int cio_tpi(void)
 {
@@ -667,6 +667,10 @@
 	tpi_info = (struct tpi_info *)&S390_lowcore.subchannel_id;
 	if (tpi(NULL) != 1)
 		return 0;
+	if (tpi_info->adapter_IO) {
+		do_adapter_IO(tpi_info->isc);
+		return 1;
+	}
 	irb = (struct irb *)&S390_lowcore.irb;
 	/* Store interrupt response block to lowcore. */
 	if (tsch(tpi_info->schid, irb) != 0)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b7bd5b0..3868ab2 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1800,10 +1800,12 @@
 	switch (retval) {
 	case SCSI_MLQUEUE_HOST_BUSY:
 		twa_free_request_id(tw_dev, request_id);
+		twa_unmap_scsi_data(tw_dev, request_id);
 		break;
 	case 1:
 		tw_dev->state[request_id] = TW_S_COMPLETED;
 		twa_free_request_id(tw_dev, request_id);
+		twa_unmap_scsi_data(tw_dev, request_id);
 		SCpnt->result = (DID_ERROR << 16);
 		done(SCpnt);
 		retval = 0;
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8d9dae8..3878b73 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -837,6 +837,7 @@
 	# (temporary): known alpha quality driver
 	depends on EXPERIMENTAL
 	select SCSI_SAS_LIBSAS
+	select SCSI_SAS_HOST_SMP
 	---help---
 	  This driver supports the 6Gb/s SAS capabilities of the storage
 	  control unit found in the Intel(R) C600 series chipset.
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 3c08f53..6153a66 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -88,7 +88,7 @@
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
 obj-$(CONFIG_SCSI_QLA_FC)	+= qla2xxx/
-obj-$(CONFIG_SCSI_QLA_ISCSI)	+= qla4xxx/
+obj-$(CONFIG_SCSI_QLA_ISCSI)	+= libiscsi.o qla4xxx/
 obj-$(CONFIG_SCSI_LPFC)		+= lpfc/
 obj-$(CONFIG_SCSI_BFA_FC)	+= bfa/
 obj-$(CONFIG_SCSI_PAS16)	+= pas16.o
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c
index e7d0d47..e5f2d7d 100644
--- a/drivers/scsi/aacraid/commsup.c
+++ b/drivers/scsi/aacraid/commsup.c
@@ -1283,6 +1283,8 @@
 	kfree(aac->queues);
 	aac->queues = NULL;
 	free_irq(aac->pdev->irq, aac);
+	if (aac->msi)
+		pci_disable_msi(aac->pdev);
 	kfree(aac->fsa_dev);
 	aac->fsa_dev = NULL;
 	quirks = aac_get_driver_ident(index)->quirks;
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 9ae80cd..dba72a4 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -563,7 +563,7 @@
 	nopout_wqe->itt = ((u16)task->itt |
 			   (ISCSI_TASK_TYPE_MPATH <<
 			    ISCSI_TMF_REQUEST_TYPE_SHIFT));
-	nopout_wqe->ttt = nopout_hdr->ttt;
+	nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt);
 	nopout_wqe->flags = 0;
 	if (!unsol)
 		nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION;
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index bd22041..f586448 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -913,7 +913,7 @@
 	struct t3cdev *t3dev = (struct t3cdev *)csk->cdev->lldev;
 
 	if (csk->l2t) {
-		l2t_release(L2DATA(t3dev), csk->l2t);
+		l2t_release(t3dev, csk->l2t);
 		csk->l2t = NULL;
 		cxgbi_sock_put(csk);
 	}
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index ba710e3..5d0e9a2 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -432,6 +432,8 @@
 	u8 flogi_maddr[ETH_ALEN];
 	const struct net_device_ops *ops;
 
+	rtnl_lock();
+
 	/*
 	 * Don't listen for Ethernet packets anymore.
 	 * synchronize_net() ensures that the packet handlers are not running
@@ -461,6 +463,8 @@
 					" specific feature for LLD.\n");
 	}
 
+	rtnl_unlock();
+
 	/* Release the self-reference taken during fcoe_interface_create() */
 	fcoe_interface_put(fcoe);
 }
@@ -1951,11 +1955,8 @@
 	fcoe_if_destroy(port->lport);
 
 	/* Do not tear down the fcoe interface for NPIV port */
-	if (!npiv) {
-		rtnl_lock();
+	if (!npiv)
 		fcoe_interface_cleanup(fcoe);
-		rtnl_unlock();
-	}
 
 	mutex_unlock(&fcoe_config_mutex);
 }
@@ -2009,8 +2010,9 @@
 		printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
 		       netdev->name);
 		rc = -EIO;
+		rtnl_unlock();
 		fcoe_interface_cleanup(fcoe);
-		goto out_nodev;
+		goto out_nortnl;
 	}
 
 	/* Make this the "master" N_Port */
@@ -2027,6 +2029,7 @@
 
 out_nodev:
 	rtnl_unlock();
+out_nortnl:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
 }
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index ec61bdb..b200b73 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -676,6 +676,16 @@
 	BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA);
 	removed[*nremoved] = h->dev[entry];
 	(*nremoved)++;
+
+	/*
+	 * New physical devices won't have target/lun assigned yet
+	 * so we need to preserve the values in the slot we are replacing.
+	 */
+	if (new_entry->target == -1) {
+		new_entry->target = h->dev[entry]->target;
+		new_entry->lun = h->dev[entry]->lun;
+	}
+
 	h->dev[entry] = new_entry;
 	added[*nadded] = new_entry;
 	(*nadded)++;
@@ -1548,10 +1558,17 @@
 }
 
 static int hpsa_update_device_info(struct ctlr_info *h,
-	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device)
+	unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
+	unsigned char *is_OBDR_device)
 {
-#define OBDR_TAPE_INQ_SIZE 49
+
+#define OBDR_SIG_OFFSET 43
+#define OBDR_TAPE_SIG "$DR-10"
+#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
+#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)
+
 	unsigned char *inq_buff;
+	unsigned char *obdr_sig;
 
 	inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
 	if (!inq_buff)
@@ -1583,6 +1600,16 @@
 	else
 		this_device->raid_level = RAID_UNKNOWN;
 
+	if (is_OBDR_device) {
+		/* See if this is a One-Button-Disaster-Recovery device
+		 * by looking for "$DR-10" at offset 43 in inquiry data.
+		 */
+		obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
+		*is_OBDR_device = (this_device->devtype == TYPE_ROM &&
+					strncmp(obdr_sig, OBDR_TAPE_SIG,
+						OBDR_SIG_LEN) == 0);
+	}
+
 	kfree(inq_buff);
 	return 0;
 
@@ -1716,7 +1743,7 @@
 		return 0;
 	}
 
-	if (hpsa_update_device_info(h, scsi3addr, this_device))
+	if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
 		return 0;
 	(*nmsa2xxx_enclosures)++;
 	hpsa_set_bus_target_lun(this_device, bus, target, 0);
@@ -1808,7 +1835,6 @@
 	 */
 	struct ReportLUNdata *physdev_list = NULL;
 	struct ReportLUNdata *logdev_list = NULL;
-	unsigned char *inq_buff = NULL;
 	u32 nphysicals = 0;
 	u32 nlogicals = 0;
 	u32 ndev_allocated = 0;
@@ -1824,11 +1850,9 @@
 		GFP_KERNEL);
 	physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
 	logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
-	inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
 	tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
 
-	if (!currentsd || !physdev_list || !logdev_list ||
-		!inq_buff || !tmpdevice) {
+	if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
 		dev_err(&h->pdev->dev, "out of memory\n");
 		goto out;
 	}
@@ -1863,7 +1887,7 @@
 	/* adjust our table of devices */
 	nmsa2xxx_enclosures = 0;
 	for (i = 0; i < nphysicals + nlogicals + 1; i++) {
-		u8 *lunaddrbytes;
+		u8 *lunaddrbytes, is_OBDR = 0;
 
 		/* Figure out where the LUN ID info is coming from */
 		lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
@@ -1874,7 +1898,8 @@
 			continue;
 
 		/* Get device type, vendor, model, device id */
-		if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice))
+		if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+							&is_OBDR))
 			continue; /* skip it if we can't talk to it. */
 		figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun,
 			tmpdevice);
@@ -1898,7 +1923,7 @@
 		hpsa_set_bus_target_lun(this_device, bus, target, lun);
 
 		switch (this_device->devtype) {
-		case TYPE_ROM: {
+		case TYPE_ROM:
 			/* We don't *really* support actual CD-ROM devices,
 			 * just "One Button Disaster Recovery" tape drive
 			 * which temporarily pretends to be a CD-ROM drive.
@@ -1906,15 +1931,8 @@
 			 * device by checking for "$DR-10" in bytes 43-48 of
 			 * the inquiry data.
 			 */
-				char obdr_sig[7];
-#define OBDR_TAPE_SIG "$DR-10"
-				strncpy(obdr_sig, &inq_buff[43], 6);
-				obdr_sig[6] = '\0';
-				if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0)
-					/* Not OBDR device, ignore it. */
-					break;
-			}
-			ncurrent++;
+			if (is_OBDR)
+				ncurrent++;
 			break;
 		case TYPE_DISK:
 			if (i < nphysicals)
@@ -1947,7 +1965,6 @@
 	for (i = 0; i < ndev_allocated; i++)
 		kfree(currentsd[i]);
 	kfree(currentsd);
-	kfree(inq_buff);
 	kfree(physdev_list);
 	kfree(logdev_list);
 }
diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c
index 26072f1..6981b77 100644
--- a/drivers/scsi/isci/host.c
+++ b/drivers/scsi/isci/host.c
@@ -531,6 +531,9 @@
 			break;
 
 		case SCU_COMPLETION_TYPE_EVENT:
+			sci_controller_event_completion(ihost, ent);
+			break;
+
 		case SCU_COMPLETION_TYPE_NOTIFY: {
 			event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) <<
 				       (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT);
@@ -1091,6 +1094,7 @@
 	struct isci_request *request;
 	struct isci_request *next_request;
 	struct sas_task     *task;
+	u16 active;
 
 	INIT_LIST_HEAD(&completed_request_list);
 	INIT_LIST_HEAD(&errored_request_list);
@@ -1181,6 +1185,13 @@
 		}
 	}
 
+	/* the coalesence timeout doubles at each encoding step, so
+	 * update it based on the ilog2 value of the outstanding requests
+	 */
+	active = isci_tci_active(ihost);
+	writel(SMU_ICC_GEN_VAL(NUMBER, active) |
+	       SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)),
+	       &ihost->smu_registers->interrupt_coalesce_control);
 }
 
 /**
@@ -1471,7 +1482,7 @@
 	struct isci_host *ihost = container_of(sm, typeof(*ihost), sm);
 
 	/* set the default interrupt coalescence number and timeout value. */
-	sci_controller_set_interrupt_coalescence(ihost, 0x10, 250);
+	sci_controller_set_interrupt_coalescence(ihost, 0, 0);
 }
 
 static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm)
diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h
index 062101a..9f33831 100644
--- a/drivers/scsi/isci/host.h
+++ b/drivers/scsi/isci/host.h
@@ -369,6 +369,9 @@
 #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1))
 #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1))
 
+/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */
+#define ISCI_COALESCE_BASE 9
+
 /* expander attached sata devices require 3 rnc slots */
 static inline int sci_remote_device_node_count(struct isci_remote_device *idev)
 {
diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c
index 61e0d09..29aa34e 100644
--- a/drivers/scsi/isci/init.c
+++ b/drivers/scsi/isci/init.c
@@ -59,10 +59,19 @@
 #include <linux/firmware.h>
 #include <linux/efi.h>
 #include <asm/string.h>
+#include <scsi/scsi_host.h>
 #include "isci.h"
 #include "task.h"
 #include "probe_roms.h"
 
+#define MAJ 1
+#define MIN 0
+#define BUILD 0
+#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
+	__stringify(BUILD)
+
+MODULE_VERSION(DRV_VERSION);
+
 static struct scsi_transport_template *isci_transport_template;
 
 static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = {
@@ -113,6 +122,22 @@
 module_param(max_concurr_spinup, byte, 0);
 MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup");
 
+static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
+	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
+	struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
+
+	return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
+}
+
+static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
+
+struct device_attribute *isci_host_attrs[] = {
+	&dev_attr_isci_id,
+	NULL
+};
+
 static struct scsi_host_template isci_sht = {
 
 	.module				= THIS_MODULE,
@@ -138,6 +163,7 @@
 	.slave_alloc			= sas_slave_alloc,
 	.target_destroy			= sas_target_destroy,
 	.ioctl				= sas_ioctl,
+	.shost_attrs			= isci_host_attrs,
 };
 
 static struct sas_domain_function_template isci_transport_ops  = {
@@ -232,17 +258,6 @@
 	return 0;
 }
 
-static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev);
-	struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost);
-	struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha);
-
-	return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id);
-}
-
-static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL);
-
 static void isci_unregister(struct isci_host *isci_host)
 {
 	struct Scsi_Host *shost;
@@ -251,7 +266,6 @@
 		return;
 
 	shost = isci_host->shost;
-	device_remove_file(&shost->shost_dev, &dev_attr_isci_id);
 
 	sas_unregister_ha(&isci_host->sas_ha);
 
@@ -415,14 +429,8 @@
 	if (err)
 		goto err_shost_remove;
 
-	err = device_create_file(&shost->shost_dev, &dev_attr_isci_id);
-	if (err)
-		goto err_unregister_ha;
-
 	return isci_host;
 
- err_unregister_ha:
-	sas_unregister_ha(&(isci_host->sas_ha));
  err_shost_remove:
 	scsi_remove_host(shost);
  err_shost:
@@ -540,7 +548,8 @@
 {
 	int err;
 
-	pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME);
+	pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n",
+		DRV_NAME, DRV_VERSION);
 
 	isci_transport_template = sas_domain_attach_transport(&isci_transport_ops);
 	if (!isci_transport_template)
diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c
index 79313a7..430fc8f 100644
--- a/drivers/scsi/isci/phy.c
+++ b/drivers/scsi/isci/phy.c
@@ -104,6 +104,7 @@
 	u32 parity_count = 0;
 	u32 llctl, link_rate;
 	u32 clksm_value = 0;
+	u32 sp_timeouts = 0;
 
 	iphy->link_layer_registers = reg;
 
@@ -211,6 +212,18 @@
 	llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate);
 	writel(llctl, &iphy->link_layer_registers->link_layer_control);
 
+	sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts);
+
+	/* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */
+	sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF);
+
+	/* Set RATE_CHANGE timeout value to 0x3B (59us).  This ensures SCU can
+	 * lock with 3Gb drive when SCU max rate is set to 1.5Gb.
+	 */
+	sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B);
+
+	writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts);
+
 	if (is_a2(ihost->pdev)) {
 		/* Program the max ARB time for the PHY to 700us so we inter-operate with
 		 * the PMC expander which shuts down PHYs if the expander PHY generates too
diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h
index 9b266c7..00afc73 100644
--- a/drivers/scsi/isci/registers.h
+++ b/drivers/scsi/isci/registers.h
@@ -1299,6 +1299,18 @@
 #define SCU_AFE_XCVRCR_OFFSET       0x00DC
 #define SCU_AFE_LUTCR_OFFSET        0x00E0
 
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT          (0UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK           (0x000000FFUL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT                 (8UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK                  (0x0000FF00UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT         (16UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK          (0x00FF0000UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT              (24UL)
+#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK               (0xFF000000UL)
+
+#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \
+	SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value)
+
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT                  (0)
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK                   (0x00000003)
 #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1                   (0)
diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c
index a46e07a..b5d3a8c 100644
--- a/drivers/scsi/isci/request.c
+++ b/drivers/scsi/isci/request.c
@@ -732,12 +732,20 @@
 		sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
 		return SCI_SUCCESS;
 	case SCI_REQ_TASK_WAIT_TC_RESP:
+		/* The task frame was already confirmed to have been
+		 * sent by the SCU HW.  Since the state machine is
+		 * now only waiting for the task response itself,
+		 * abort the request and complete it immediately
+		 * and don't wait for the task response.
+		 */
 		sci_change_state(&ireq->sm, SCI_REQ_ABORTING);
 		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
 		return SCI_SUCCESS;
 	case SCI_REQ_ABORTING:
-		sci_change_state(&ireq->sm, SCI_REQ_COMPLETED);
-		return SCI_SUCCESS;
+		/* If a request has a termination requested twice, return
+		 * a failure indication, since HW confirmation of the first
+		 * abort is still outstanding.
+		 */
 	case SCI_REQ_COMPLETED:
 	default:
 		dev_warn(&ireq->owning_controller->pdev->dev,
@@ -2399,22 +2407,19 @@
 	}
 }
 
-static void isci_request_process_stp_response(struct sas_task *task,
-					      void *response_buffer)
+static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis)
 {
-	struct dev_to_host_fis *d2h_reg_fis = response_buffer;
 	struct task_status_struct *ts = &task->task_status;
 	struct ata_task_resp *resp = (void *)&ts->buf[0];
 
-	resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6));
-	memcpy(&resp->ending_fis[0], response_buffer + 16, 24);
+	resp->frame_len = sizeof(*fis);
+	memcpy(resp->ending_fis, fis, sizeof(*fis));
 	ts->buf_valid_size = sizeof(*resp);
 
-	/**
-	 * If the device fault bit is set in the status register, then
+	/* If the device fault bit is set in the status register, then
 	 * set the sense data and return.
 	 */
-	if (d2h_reg_fis->status & ATA_DF)
+	if (fis->status & ATA_DF)
 		ts->stat = SAS_PROTO_RESPONSE;
 	else
 		ts->stat = SAM_STAT_GOOD;
@@ -2428,7 +2433,6 @@
 {
 	struct sas_task *task = isci_request_access_task(request);
 	struct ssp_response_iu *resp_iu;
-	void *resp_buf;
 	unsigned long task_flags;
 	struct isci_remote_device *idev = isci_lookup_device(task->dev);
 	enum service_response response       = SAS_TASK_UNDELIVERED;
@@ -2565,9 +2569,7 @@
 				task);
 
 			if (sas_protocol_ata(task->task_proto)) {
-				resp_buf = &request->stp.rsp;
-				isci_request_process_stp_response(task,
-								  resp_buf);
+				isci_process_stp_response(task, &request->stp.rsp);
 			} else if (SAS_PROTOCOL_SSP == task->task_proto) {
 
 				/* crack the iu response buffer. */
diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c
index e9e1e2a..16f88ab 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.c
+++ b/drivers/scsi/isci/unsolicited_frame_control.c
@@ -72,7 +72,7 @@
 	 */
 	buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE;
 	header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header);
-	size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t);
+	size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]);
 
 	/*
 	 * The Unsolicited Frame buffers are set at the start of the UF
diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h
index 31cb950..75d8966 100644
--- a/drivers/scsi/isci/unsolicited_frame_control.h
+++ b/drivers/scsi/isci/unsolicited_frame_control.h
@@ -214,7 +214,7 @@
 	 * starting address of the UF address table.
 	 * 64-bit pointers are required by the hardware.
 	 */
-	dma_addr_t *array;
+	u64 *array;
 
 	/**
 	 * This field specifies the physical address location for the UF
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index 01ff082..d261e98 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -494,6 +494,9 @@
 	 */
 	error = lport->tt.frame_send(lport, fp);
 
+	if (fh->fh_type == FC_TYPE_BLS)
+		return error;
+
 	/*
 	 * Update the exchange and sequence flags,
 	 * assuming all frames for the sequence have been sent.
@@ -575,42 +578,35 @@
 }
 
 /**
- * fc_seq_exch_abort() - Abort an exchange and sequence
- * @req_sp:	The sequence to be aborted
+ * fc_exch_abort_locked() - Abort an exchange
+ * @ep:	The exchange to be aborted
  * @timer_msec: The period of time to wait before aborting
  *
- * Generally called because of a timeout or an abort from the upper layer.
+ * Locking notes:  Called with exch lock held
+ *
+ * Return value: 0 on success else error code
  */
-static int fc_seq_exch_abort(const struct fc_seq *req_sp,
-			     unsigned int timer_msec)
+static int fc_exch_abort_locked(struct fc_exch *ep,
+				unsigned int timer_msec)
 {
 	struct fc_seq *sp;
-	struct fc_exch *ep;
 	struct fc_frame *fp;
 	int error;
 
-	ep = fc_seq_exch(req_sp);
-
-	spin_lock_bh(&ep->ex_lock);
 	if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) ||
-	    ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) {
-		spin_unlock_bh(&ep->ex_lock);
+	    ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP))
 		return -ENXIO;
-	}
 
 	/*
 	 * Send the abort on a new sequence if possible.
 	 */
 	sp = fc_seq_start_next_locked(&ep->seq);
-	if (!sp) {
-		spin_unlock_bh(&ep->ex_lock);
+	if (!sp)
 		return -ENOMEM;
-	}
 
 	ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL;
 	if (timer_msec)
 		fc_exch_timer_set_locked(ep, timer_msec);
-	spin_unlock_bh(&ep->ex_lock);
 
 	/*
 	 * If not logged into the fabric, don't send ABTS but leave
@@ -633,6 +629,28 @@
 }
 
 /**
+ * fc_seq_exch_abort() - Abort an exchange and sequence
+ * @req_sp:	The sequence to be aborted
+ * @timer_msec: The period of time to wait before aborting
+ *
+ * Generally called because of a timeout or an abort from the upper layer.
+ *
+ * Return value: 0 on success else error code
+ */
+static int fc_seq_exch_abort(const struct fc_seq *req_sp,
+			     unsigned int timer_msec)
+{
+	struct fc_exch *ep;
+	int error;
+
+	ep = fc_seq_exch(req_sp);
+	spin_lock_bh(&ep->ex_lock);
+	error = fc_exch_abort_locked(ep, timer_msec);
+	spin_unlock_bh(&ep->ex_lock);
+	return error;
+}
+
+/**
  * fc_exch_timeout() - Handle exchange timer expiration
  * @work: The work_struct identifying the exchange that timed out
  */
@@ -1715,6 +1733,7 @@
 	int rc = 1;
 
 	spin_lock_bh(&ep->ex_lock);
+	fc_exch_abort_locked(ep, 0);
 	ep->state |= FC_EX_RST_CLEANUP;
 	if (cancel_delayed_work(&ep->timeout_work))
 		atomic_dec(&ep->ex_refcnt);	/* drop hold for timer */
@@ -1962,6 +1981,7 @@
 	struct fc_exch *ep;
 	struct fc_seq *sp = NULL;
 	struct fc_frame_header *fh;
+	struct fc_fcp_pkt *fsp = NULL;
 	int rc = 1;
 
 	ep = fc_exch_alloc(lport, fp);
@@ -1984,8 +2004,10 @@
 	fc_exch_setup_hdr(ep, fp, ep->f_ctl);
 	sp->cnt++;
 
-	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD)
+	if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) {
+		fsp = fr_fsp(fp);
 		fc_fcp_ddp_setup(fr_fsp(fp), ep->xid);
+	}
 
 	if (unlikely(lport->tt.frame_send(lport, fp)))
 		goto err;
@@ -1999,7 +2021,8 @@
 	spin_unlock_bh(&ep->ex_lock);
 	return sp;
 err:
-	fc_fcp_ddp_done(fr_fsp(fp));
+	if (fsp)
+		fc_fcp_ddp_done(fsp);
 	rc = fc_exch_done_locked(ep);
 	spin_unlock_bh(&ep->ex_lock);
 	if (!rc)
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index afb63c8..4c41ee8 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -2019,6 +2019,11 @@
 	struct fc_fcp_internal *si;
 	int rc = FAILED;
 	unsigned long flags;
+	int rval;
+
+	rval = fc_block_scsi_eh(sc_cmd);
+	if (rval)
+		return rval;
 
 	lport = shost_priv(sc_cmd->device->host);
 	if (lport->state != LPORT_ST_READY)
@@ -2068,9 +2073,9 @@
 	int rc = FAILED;
 	int rval;
 
-	rval = fc_remote_port_chkready(rport);
+	rval = fc_block_scsi_eh(sc_cmd);
 	if (rval)
-		goto out;
+		return rval;
 
 	lport = shost_priv(sc_cmd->device->host);
 
@@ -2116,6 +2121,8 @@
 
 	FC_SCSI_DBG(lport, "Resetting host\n");
 
+	fc_block_scsi_eh(sc_cmd);
+
 	lport->tt.lport_reset(lport);
 	wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT;
 	while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies,
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index e55ed9c..628f347 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -88,6 +88,7 @@
  */
 
 #include <linux/timer.h>
+#include <linux/delay.h>
 #include <linux/slab.h>
 #include <asm/unaligned.h>
 
@@ -1029,8 +1030,16 @@
 			   FCH_EVT_LIPRESET, 0);
 	fc_vports_linkchange(lport);
 	fc_lport_reset_locked(lport);
-	if (lport->link_up)
+	if (lport->link_up) {
+		/*
+		 * Wait upto resource allocation time out before
+		 * doing re-login since incomplete FIP exchanged
+		 * from last session may collide with exchanges
+		 * in new session.
+		 */
+		msleep(lport->r_a_tov);
 		fc_lport_enter_flogi(lport);
+	}
 }
 
 /**
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index f84084b..c9e3dc0 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -1721,7 +1721,7 @@
 	list_for_each_entry(ch, &ex->children, siblings) {
 		if (ch->dev_type == EDGE_DEV || ch->dev_type == FANOUT_DEV) {
 			res = sas_find_bcast_dev(ch, src_dev);
-			if (src_dev)
+			if (*src_dev)
 				return res;
 		}
 	}
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 7836eb0..a31e05f 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -1786,13 +1786,16 @@
 			fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN);
 	}
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
+			int prot = 0;
 			vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_user, vha, 0x7082,
 			    "Registered for DIF/DIX type 1 and 3 protection.\n");
+			if (ql2xenabledif == 1)
+				prot = SHOST_DIX_TYPE0_PROTECTION;
 			scsi_host_set_prot(vha->host,
-			    SHOST_DIF_TYPE1_PROTECTION
+			    prot | SHOST_DIF_TYPE1_PROTECTION
 			    | SHOST_DIF_TYPE2_PROTECTION
 			    | SHOST_DIF_TYPE3_PROTECTION
 			    | SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index 2155071..d79cd8a 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -8,24 +8,24 @@
 /*
  * Table for showing the current message id in use for particular level
  * Change this table for addition of log/debug messages.
- * -----------------------------------------------------
- * |             Level            |   Last Value Used  |
- * -----------------------------------------------------
- * | Module Init and Probe        |       0x0116       |
- * | Mailbox commands             |       0x111e       |
- * | Device Discovery             |       0x2083       |
- * | Queue Command and IO tracing |       0x302e       |
- * | DPC Thread                   |       0x401c       |
- * | Async Events                 |       0x5059       |
- * | Timer Routines               |       0x600d       |
- * | User Space Interactions      |       0x709c       |
- * | Task Management              |       0x8043       |
- * | AER/EEH                      |       0x900f       |
- * | Virtual Port                 |       0xa007       |
- * | ISP82XX Specific             |       0xb027       |
- * | MultiQ                       |       0xc00b       |
- * | Misc                         |       0xd00b       |
- * -----------------------------------------------------
+ * ----------------------------------------------------------------------
+ * |             Level            |   Last Value Used  |     Holes	|
+ * ----------------------------------------------------------------------
+ * | Module Init and Probe        |       0x0116       |  		|
+ * | Mailbox commands             |       0x1126       |		|
+ * | Device Discovery             |       0x2083       |		|
+ * | Queue Command and IO tracing |       0x302e       |     0x3008     |
+ * | DPC Thread                   |       0x401c       |		|
+ * | Async Events                 |       0x5059       |		|
+ * | Timer Routines               |       0x600d       |		|
+ * | User Space Interactions      |       0x709d       |		|
+ * | Task Management              |       0x8041       |    		|
+ * | AER/EEH                      |       0x900f       |		|
+ * | Virtual Port                 |       0xa007       |		|
+ * | ISP82XX Specific             |       0xb04f       |    		|
+ * | MultiQ                       |       0xc00b       |		|
+ * | Misc                         |       0xd00b       |		|
+ * ----------------------------------------------------------------------
  */
 
 #include "qla_def.h"
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index cc5a792..a03eaf4 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2529,6 +2529,7 @@
 #define DT_ISP8021			BIT_14
 #define DT_ISP_LAST			(DT_ISP8021 << 1)
 
+#define DT_T10_PI                       BIT_25
 #define DT_IIDMA                        BIT_26
 #define DT_FWI2                         BIT_27
 #define DT_ZIO_SUPPORTED                BIT_28
@@ -2572,6 +2573,7 @@
 #define IS_NOCACHE_VPD_TYPE(ha)	(IS_QLA81XX(ha))
 #define IS_ALOGIO_CAPABLE(ha)	(IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
 
+#define IS_T10_PI_CAPABLE(ha)   ((ha)->device_type & DT_T10_PI)
 #define IS_IIDMA_CAPABLE(ha)    ((ha)->device_type & DT_IIDMA)
 #define IS_FWI2_CAPABLE(ha)     ((ha)->device_type & DT_FWI2)
 #define IS_ZIO_SUPPORTED(ha)    ((ha)->device_type & DT_ZIO_SUPPORTED)
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 691783a..aa69486 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -537,6 +537,11 @@
 	/*
 	 * If DIF Error is set in comp_status, these additional fields are
 	 * defined:
+	 *
+	 * !!! NOTE: Firmware sends expected/actual DIF data in big endian
+	 * format; but all of the "data" field gets swab32-d in the beginning
+	 * of qla2x00_status_entry().
+	 *
 	 * &data[10] : uint8_t report_runt_bg[2];	- computed guard
 	 * &data[12] : uint8_t actual_dif[8];		- DIF Data received
 	 * &data[20] : uint8_t expected_dif[8];		- DIF Data computed
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index def6942..37da04d 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -3838,15 +3838,12 @@
 		req = vha->req;
 	rsp = req->rsp;
 
-	atomic_set(&vha->loop_state, LOOP_UPDATE);
 	clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags);
 	if (vha->flags.online) {
 		if (!(rval = qla2x00_fw_ready(vha))) {
 			/* Wait at most MAX_TARGET RSCNs for a stable link. */
 			wait_time = 256;
 			do {
-				atomic_set(&vha->loop_state, LOOP_UPDATE);
-
 				/* Issue a marker after FW becomes ready. */
 				qla2x00_marker(vha, req, rsp, 0, 0,
 					MK_SYNC_ALL);
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index d2e904b..9902834 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -102,3 +102,32 @@
 		    fcport->d_id.b.al_pa);
 	}
 }
+
+static inline int
+qla2x00_hba_err_chk_enabled(srb_t *sp)
+{
+	/*
+	 * Uncomment when corresponding SCSI changes are done.
+	 *
+	if (!sp->cmd->prot_chk)
+		return 0;
+	 *
+	 */
+
+	switch (scsi_get_prot_op(sp->cmd)) {
+	case SCSI_PROT_READ_STRIP:
+	case SCSI_PROT_WRITE_INSERT:
+		if (ql2xenablehba_err_chk >= 1)
+			return 1;
+		break;
+	case SCSI_PROT_READ_PASS:
+	case SCSI_PROT_WRITE_PASS:
+		if (ql2xenablehba_err_chk >= 2)
+			return 1;
+		break;
+	case SCSI_PROT_READ_INSERT:
+	case SCSI_PROT_WRITE_STRIP:
+		return 1;
+	}
+	return 0;
+}
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 49d6906..dbec896 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -709,20 +709,28 @@
  *
  */
 static inline void
-qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt,
+qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt,
     unsigned int protcnt)
 {
-	struct sd_dif_tuple *spt;
+	struct scsi_cmnd *cmd = sp->cmd;
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
-	unsigned char op = scsi_get_prot_op(cmd);
 
 	switch (scsi_get_prot_type(cmd)) {
-	/* For TYPE 0 protection: no checking */
 	case SCSI_PROT_DIF_TYPE0:
-		pkt->ref_tag_mask[0] = 0x00;
-		pkt->ref_tag_mask[1] = 0x00;
-		pkt->ref_tag_mask[2] = 0x00;
-		pkt->ref_tag_mask[3] = 0x00;
+		/*
+		 * No check for ql2xenablehba_err_chk, as it would be an
+		 * I/O error if hba tag generation is not done.
+		 */
+		pkt->ref_tag = cpu_to_le32((uint32_t)
+		    (0xffffffff & scsi_get_lba(cmd)));
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
+		pkt->ref_tag_mask[0] = 0xff;
+		pkt->ref_tag_mask[1] = 0xff;
+		pkt->ref_tag_mask[2] = 0xff;
+		pkt->ref_tag_mask[3] = 0xff;
 		break;
 
 	/*
@@ -730,20 +738,16 @@
 	 * match LBA in CDB + N
 	 */
 	case SCSI_PROT_DIF_TYPE2:
-		if (!ql2xenablehba_err_chk)
-			break;
-
-		if (scsi_prot_sg_count(cmd)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			pkt->app_tag = swab32(spt->app_tag);
-			pkt->app_tag_mask[0] =  0xff;
-			pkt->app_tag_mask[1] =  0xff;
-		}
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
 
 		pkt->ref_tag = cpu_to_le32((uint32_t)
 		    (0xffffffff & scsi_get_lba(cmd)));
 
+		if (!qla2x00_hba_err_chk_enabled(sp))
+			break;
+
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -763,26 +767,15 @@
 	 * 16 bit app tag.
 	 */
 	case SCSI_PROT_DIF_TYPE1:
-		if (!ql2xenablehba_err_chk)
+		pkt->ref_tag = cpu_to_le32((uint32_t)
+		    (0xffffffff & scsi_get_lba(cmd)));
+		pkt->app_tag = __constant_cpu_to_le16(0);
+		pkt->app_tag_mask[0] = 0x0;
+		pkt->app_tag_mask[1] = 0x0;
+
+		if (!qla2x00_hba_err_chk_enabled(sp))
 			break;
 
-		if (protcnt && (op == SCSI_PROT_WRITE_STRIP ||
-		    op == SCSI_PROT_WRITE_PASS)) {
-			spt = page_address(sg_page(scsi_prot_sglist(cmd))) +
-			    scsi_prot_sglist(cmd)[0].offset;
-			ql_dbg(ql_dbg_io, vha, 0x3008,
-			    "LBA from user %p, lba = 0x%x for cmd=%p.\n",
-			    spt, (int)spt->ref_tag, cmd);
-			pkt->ref_tag = swab32(spt->ref_tag);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		} else {
-			pkt->ref_tag = cpu_to_le32((uint32_t)
-			    (0xffffffff & scsi_get_lba(cmd)));
-			pkt->app_tag = __constant_cpu_to_le16(0);
-			pkt->app_tag_mask[0] = 0x0;
-			pkt->app_tag_mask[1] = 0x0;
-		}
 		/* enable ALL bytes of the ref tag */
 		pkt->ref_tag_mask[0] = 0xff;
 		pkt->ref_tag_mask[1] = 0xff;
@@ -798,7 +791,161 @@
 	    scsi_get_prot_type(cmd), cmd);
 }
 
+struct qla2_sgx {
+	dma_addr_t		dma_addr;	/* OUT */
+	uint32_t		dma_len;	/* OUT */
 
+	uint32_t		tot_bytes;	/* IN */
+	struct scatterlist	*cur_sg;	/* IN */
+
+	/* for book keeping, bzero on initial invocation */
+	uint32_t		bytes_consumed;
+	uint32_t		num_bytes;
+	uint32_t		tot_partial;
+
+	/* for debugging */
+	uint32_t		num_sg;
+	srb_t			*sp;
+};
+
+static int
+qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx,
+	uint32_t *partial)
+{
+	struct scatterlist *sg;
+	uint32_t cumulative_partial, sg_len;
+	dma_addr_t sg_dma_addr;
+
+	if (sgx->num_bytes == sgx->tot_bytes)
+		return 0;
+
+	sg = sgx->cur_sg;
+	cumulative_partial = sgx->tot_partial;
+
+	sg_dma_addr = sg_dma_address(sg);
+	sg_len = sg_dma_len(sg);
+
+	sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed;
+
+	if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) {
+		sgx->dma_len = (blk_sz - cumulative_partial);
+		sgx->tot_partial = 0;
+		sgx->num_bytes += blk_sz;
+		*partial = 0;
+	} else {
+		sgx->dma_len = sg_len - sgx->bytes_consumed;
+		sgx->tot_partial += sgx->dma_len;
+		*partial = 1;
+	}
+
+	sgx->bytes_consumed += sgx->dma_len;
+
+	if (sg_len == sgx->bytes_consumed) {
+		sg = sg_next(sg);
+		sgx->num_sg++;
+		sgx->cur_sg = sg;
+		sgx->bytes_consumed = 0;
+	}
+
+	return 1;
+}
+
+static int
+qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp,
+	uint32_t *dsd, uint16_t tot_dsds)
+{
+	void *next_dsd;
+	uint8_t avail_dsds = 0;
+	uint32_t dsd_list_len;
+	struct dsd_dma *dsd_ptr;
+	struct scatterlist *sg_prot;
+	uint32_t *cur_dsd = dsd;
+	uint16_t	used_dsds = tot_dsds;
+
+	uint32_t	prot_int;
+	uint32_t	partial;
+	struct qla2_sgx sgx;
+	dma_addr_t	sle_dma;
+	uint32_t	sle_dma_len, tot_prot_dma_len = 0;
+	struct scsi_cmnd *cmd = sp->cmd;
+
+	prot_int = cmd->device->sector_size;
+
+	memset(&sgx, 0, sizeof(struct qla2_sgx));
+	sgx.tot_bytes = scsi_bufflen(sp->cmd);
+	sgx.cur_sg = scsi_sglist(sp->cmd);
+	sgx.sp = sp;
+
+	sg_prot = scsi_prot_sglist(sp->cmd);
+
+	while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) {
+
+		sle_dma = sgx.dma_addr;
+		sle_dma_len = sgx.dma_len;
+alloc_and_fill:
+		/* Allocate additional continuation packets? */
+		if (avail_dsds == 0) {
+			avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ?
+					QLA_DSDS_PER_IOCB : used_dsds;
+			dsd_list_len = (avail_dsds + 1) * 12;
+			used_dsds -= avail_dsds;
+
+			/* allocate tracking DS */
+			dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC);
+			if (!dsd_ptr)
+				return 1;
+
+			/* allocate new list */
+			dsd_ptr->dsd_addr = next_dsd =
+			    dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC,
+				&dsd_ptr->dsd_list_dma);
+
+			if (!next_dsd) {
+				/*
+				 * Need to cleanup only this dsd_ptr, rest
+				 * will be done by sp_free_dma()
+				 */
+				kfree(dsd_ptr);
+				return 1;
+			}
+
+			list_add_tail(&dsd_ptr->list,
+			    &((struct crc_context *)sp->ctx)->dsd_list);
+
+			sp->flags |= SRB_CRC_CTX_DSD_VALID;
+
+			/* add new list to cmd iocb or last list */
+			*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
+			*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
+			*cur_dsd++ = dsd_list_len;
+			cur_dsd = (uint32_t *)next_dsd;
+		}
+		*cur_dsd++ = cpu_to_le32(LSD(sle_dma));
+		*cur_dsd++ = cpu_to_le32(MSD(sle_dma));
+		*cur_dsd++ = cpu_to_le32(sle_dma_len);
+		avail_dsds--;
+
+		if (partial == 0) {
+			/* Got a full protection interval */
+			sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len;
+			sle_dma_len = 8;
+
+			tot_prot_dma_len += sle_dma_len;
+			if (tot_prot_dma_len == sg_dma_len(sg_prot)) {
+				tot_prot_dma_len = 0;
+				sg_prot = sg_next(sg_prot);
+			}
+
+			partial = 1; /* So as to not re-enter this block */
+			goto alloc_and_fill;
+		}
+	}
+	/* Null termination */
+	*cur_dsd++ = 0;
+	*cur_dsd++ = 0;
+	*cur_dsd++ = 0;
+	return 0;
+}
 static int
 qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd,
 	uint16_t tot_dsds)
@@ -981,7 +1128,7 @@
 	struct scsi_cmnd	*cmd;
 	struct scatterlist	*cur_seg;
 	int			sgc;
-	uint32_t		total_bytes;
+	uint32_t		total_bytes = 0;
 	uint32_t		data_bytes;
 	uint32_t		dif_bytes;
 	uint8_t			bundling = 1;
@@ -1023,8 +1170,10 @@
 		    __constant_cpu_to_le16(CF_READ_DATA);
 	}
 
-	tot_prot_dsds = scsi_prot_sg_count(cmd);
-	if (!tot_prot_dsds)
+	if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) ||
+	    (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT))
 		bundling = 0;
 
 	/* Allocate CRC context from global pool */
@@ -1047,7 +1196,7 @@
 
 	INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list);
 
-	qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *)
+	qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *)
 	    &crc_ctx_pkt->ref_tag, tot_prot_dsds);
 
 	cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma));
@@ -1076,7 +1225,6 @@
 		fcp_cmnd->additional_cdb_len |= 2;
 
 	int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
-	host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
 	memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 	cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
 	cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
@@ -1107,15 +1255,28 @@
 	cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
 
 	/* Compute dif len and adjust data len to incude protection */
-	total_bytes = data_bytes;
 	dif_bytes = 0;
 	blk_size = cmd->device->sector_size;
-	if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) {
-		dif_bytes = (data_bytes / blk_size) * 8;
-		total_bytes += dif_bytes;
+	dif_bytes = (data_bytes / blk_size) * 8;
+
+	switch (scsi_get_prot_op(sp->cmd)) {
+	case SCSI_PROT_READ_INSERT:
+	case SCSI_PROT_WRITE_STRIP:
+	    total_bytes = data_bytes;
+	    data_bytes += dif_bytes;
+	    break;
+
+	case SCSI_PROT_READ_STRIP:
+	case SCSI_PROT_WRITE_INSERT:
+	case SCSI_PROT_READ_PASS:
+	case SCSI_PROT_WRITE_PASS:
+	    total_bytes = data_bytes + dif_bytes;
+	    break;
+	default:
+	    BUG();
 	}
 
-	if (!ql2xenablehba_err_chk)
+	if (!qla2x00_hba_err_chk_enabled(sp))
 		fw_prot_opts |= 0x10; /* Disable Guard tag checking */
 
 	if (!bundling) {
@@ -1151,7 +1312,12 @@
 
 	cmd_pkt->control_flags |=
 	    __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE);
-	if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
+
+	if (!bundling && tot_prot_dsds) {
+		if (qla24xx_walk_and_build_sglist_no_difb(ha, sp,
+		    cur_dsd, tot_dsds))
+			goto crc_queuing_error;
+	} else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd,
 	    (tot_dsds - tot_prot_dsds)))
 		goto crc_queuing_error;
 
@@ -1414,6 +1580,22 @@
 			goto queuing_error;
 		else
 			sp->flags |= SRB_DMA_VALID;
+
+		if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+		    (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+			struct qla2_sgx sgx;
+			uint32_t	partial;
+
+			memset(&sgx, 0, sizeof(struct qla2_sgx));
+			sgx.tot_bytes = scsi_bufflen(cmd);
+			sgx.cur_sg = scsi_sglist(cmd);
+			sgx.sp = sp;
+
+			nseg = 0;
+			while (qla24xx_get_one_block_sg(
+			    cmd->device->sector_size, &sgx, &partial))
+				nseg++;
+		}
 	} else
 		nseg = 0;
 
@@ -1428,6 +1610,11 @@
 			goto queuing_error;
 		else
 			sp->flags |= SRB_CRC_PROT_DMA_VALID;
+
+		if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) ||
+		    (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) {
+			nseg = scsi_bufflen(cmd) / cmd->device->sector_size;
+		}
 	} else {
 		nseg = 0;
 	}
@@ -1454,6 +1641,7 @@
 	/* Build header part of command packet (excluding the OPCODE). */
 	req->current_outstanding_cmd = handle;
 	req->outstanding_cmds[handle] = sp;
+	sp->handle = handle;
 	sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle;
 	req->cnt -= req_cnt;
 
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index b16b772..8a7591f 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -719,7 +719,6 @@
 			vha->flags.rscn_queue_overflow = 1;
 		}
 
-		atomic_set(&vha->loop_state, LOOP_UPDATE);
 		atomic_set(&vha->loop_down_timer, 0);
 		vha->flags.management_server_logged_in = 0;
 
@@ -1435,25 +1434,27 @@
  * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST
  * to indicate to the kernel that the HBA detected error.
  */
-static inline void
+static inline int
 qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24)
 {
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct scsi_cmnd *cmd = sp->cmd;
-	struct scsi_dif_tuple	*ep =
-			(struct scsi_dif_tuple *)&sts24->data[20];
-	struct scsi_dif_tuple	*ap =
-			(struct scsi_dif_tuple *)&sts24->data[12];
+	uint8_t		*ap = &sts24->data[12];
+	uint8_t		*ep = &sts24->data[20];
 	uint32_t	e_ref_tag, a_ref_tag;
 	uint16_t	e_app_tag, a_app_tag;
 	uint16_t	e_guard, a_guard;
 
-	e_ref_tag = be32_to_cpu(ep->ref_tag);
-	a_ref_tag = be32_to_cpu(ap->ref_tag);
-	e_app_tag = be16_to_cpu(ep->app_tag);
-	a_app_tag = be16_to_cpu(ap->app_tag);
-	e_guard = be16_to_cpu(ep->guard);
-	a_guard = be16_to_cpu(ap->guard);
+	/*
+	 * swab32 of the "data" field in the beginning of qla2x00_status_entry()
+	 * would make guard field appear at offset 2
+	 */
+	a_guard   = le16_to_cpu(*(uint16_t *)(ap + 2));
+	a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0));
+	a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4));
+	e_guard   = le16_to_cpu(*(uint16_t *)(ep + 2));
+	e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0));
+	e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4));
 
 	ql_dbg(ql_dbg_io, vha, 0x3023,
 	    "iocb(s) %p Returned STATUS.\n", sts24);
@@ -1465,6 +1466,63 @@
 	    cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag,
 	    a_app_tag, e_app_tag, a_guard, e_guard);
 
+	/*
+	 * Ignore sector if:
+	 * For type     3: ref & app tag is all 'f's
+	 * For type 0,1,2: app tag is all 'f's
+	 */
+	if ((a_app_tag == 0xffff) &&
+	    ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) ||
+	     (a_ref_tag == 0xffffffff))) {
+		uint32_t blocks_done, resid;
+		sector_t lba_s = scsi_get_lba(cmd);
+
+		/* 2TB boundary case covered automatically with this */
+		blocks_done = e_ref_tag - (uint32_t)lba_s + 1;
+
+		resid = scsi_bufflen(cmd) - (blocks_done *
+		    cmd->device->sector_size);
+
+		scsi_set_resid(cmd, resid);
+		cmd->result = DID_OK << 16;
+
+		/* Update protection tag */
+		if (scsi_prot_sg_count(cmd)) {
+			uint32_t i, j = 0, k = 0, num_ent;
+			struct scatterlist *sg;
+			struct sd_dif_tuple *spt;
+
+			/* Patch the corresponding protection tags */
+			scsi_for_each_prot_sg(cmd, sg,
+			    scsi_prot_sg_count(cmd), i) {
+				num_ent = sg_dma_len(sg) / 8;
+				if (k + num_ent < blocks_done) {
+					k += num_ent;
+					continue;
+				}
+				j = blocks_done - k - 1;
+				k = blocks_done;
+				break;
+			}
+
+			if (k != blocks_done) {
+				qla_printk(KERN_WARNING, sp->fcport->vha->hw,
+				    "unexpected tag values tag:lba=%x:%llx)\n",
+				    e_ref_tag, (unsigned long long)lba_s);
+				return 1;
+			}
+
+			spt = page_address(sg_page(sg)) + sg->offset;
+			spt += j;
+
+			spt->app_tag = 0xffff;
+			if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3)
+				spt->ref_tag = 0xffffffff;
+		}
+
+		return 0;
+	}
+
 	/* check guard */
 	if (e_guard != a_guard) {
 		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
@@ -1472,17 +1530,7 @@
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
-	}
-
-	/* check appl tag */
-	if (e_app_tag != a_app_tag) {
-		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
-		    0x10, 0x2);
-		set_driver_byte(cmd, DRIVER_SENSE);
-		set_host_byte(cmd, DID_ABORT);
-		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
+		return 1;
 	}
 
 	/* check ref tag */
@@ -1492,8 +1540,20 @@
 		set_driver_byte(cmd, DRIVER_SENSE);
 		set_host_byte(cmd, DID_ABORT);
 		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
-		return;
+		return 1;
 	}
+
+	/* check appl tag */
+	if (e_app_tag != a_app_tag) {
+		scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST,
+		    0x10, 0x2);
+		set_driver_byte(cmd, DRIVER_SENSE);
+		set_host_byte(cmd, DID_ABORT);
+		cmd->result |= SAM_STAT_CHECK_CONDITION << 1;
+		return 1;
+	}
+
+	return 1;
 }
 
 /**
@@ -1767,7 +1827,7 @@
 		break;
 
 	case CS_DIF_ERROR:
-		qla2x00_handle_dif_error(sp, sts24);
+		logit = qla2x00_handle_dif_error(sp, sts24);
 		break;
 	default:
 		cp->result = DID_ERROR << 16;
@@ -2468,11 +2528,10 @@
 		goto skip_msi;
 	}
 
-	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX ||
-		!QLA_MSIX_FW_MODE_1(ha->fw_attributes))) {
+	if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) {
 		ql_log(ql_log_warn, vha, 0x0035,
 		    "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n",
-		    ha->pdev->revision, ha->fw_attributes);
+		    ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX);
 		goto skip_msix;
 	}
 
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index c706ed3..f488cc6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -472,7 +472,7 @@
 	host->can_queue = base_vha->req->length + 128;
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 5cbf33a..049807c 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -2208,6 +2208,7 @@
 	struct qla_hw_data *ha;
 	struct rsp_que *rsp;
 	struct device_reg_82xx __iomem *reg;
+	unsigned long flags;
 
 	rsp = (struct rsp_que *) dev_id;
 	if (!rsp) {
@@ -2218,11 +2219,11 @@
 
 	ha = rsp->hw;
 	reg = &ha->iobase->isp82;
-	spin_lock_irq(&ha->hardware_lock);
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	vha = pci_get_drvdata(ha->pdev);
 	qla24xx_process_response_queue(vha, rsp);
 	WRT_REG_DWORD(&reg->host_int, 0);
-	spin_unlock_irq(&ha->hardware_lock);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -2838,6 +2839,16 @@
 		int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
 		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
+		/* build FCP_CMND IU */
+		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
+		int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
+		ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
+
+		if (cmd->sc_data_direction == DMA_TO_DEVICE)
+			ctx->fcp_cmnd->additional_cdb_len |= 1;
+		else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+			ctx->fcp_cmnd->additional_cdb_len |= 2;
+
 		/*
 		 * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
 		 */
@@ -2854,16 +2865,6 @@
 			}
 		}
 
-		/* build FCP_CMND IU */
-		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
-		int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
-		ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len;
-
-		if (cmd->sc_data_direction == DMA_TO_DEVICE)
-			ctx->fcp_cmnd->additional_cdb_len |= 1;
-		else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
-			ctx->fcp_cmnd->additional_cdb_len |= 2;
-
 		memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
 
 		fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 +
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index e02df27..4cace3f 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -106,17 +106,21 @@
 		"Maximum queue depth to report for target devices.");
 
 /* Do not change the value of this after module load */
-int ql2xenabledif = 1;
+int ql2xenabledif = 0;
 module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xenabledif,
 		" Enable T10-CRC-DIF "
-		" Default is 0 - No DIF Support. 1 - Enable it");
+		" Default is 0 - No DIF Support. 1 - Enable it"
+		", 2 - Enable DIF for all types, except Type 0.");
 
-int ql2xenablehba_err_chk;
+int ql2xenablehba_err_chk = 2;
 module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(ql2xenablehba_err_chk,
-		" Enable T10-CRC-DIF Error isolation by HBA"
-		" Default is 0 - Error isolation disabled, 1 - Enable it");
+		" Enable T10-CRC-DIF Error isolation by HBA:\n"
+		" Default is 1.\n"
+		"  0 -- Error isolation disabled\n"
+		"  1 -- Error isolation enabled only for DIX Type 0\n"
+		"  2 -- Error isolation enabled for all Types\n");
 
 int ql2xiidmaenable=1;
 module_param(ql2xiidmaenable, int, S_IRUGO);
@@ -909,7 +913,14 @@
 		    "Abort command mbx success.\n");
 		wait = 1;
 	}
+
+	spin_lock_irqsave(&ha->hardware_lock, flags);
 	qla2x00_sp_compl(ha, sp);
+	spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+	/* Did the command return during mailbox execution? */
+	if (ret == FAILED && !CMD_SP(cmd))
+		ret = SUCCESS;
 
 	/* Wait for the command to be returned. */
 	if (wait) {
@@ -2251,7 +2262,7 @@
 	host->this_id = 255;
 	host->cmd_per_lun = 3;
 	host->unique_id = host->host_no;
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif)
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif)
 		host->max_cmd_len = 32;
 	else
 		host->max_cmd_len = MAX_CMDSZ;
@@ -2378,13 +2389,16 @@
 	    "Detected hba at address=%p.\n",
 	    ha);
 
-	if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) {
+	if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) {
 		if (ha->fw_attributes & BIT_4) {
+			int prot = 0;
 			base_vha->flags.difdix_supported = 1;
 			ql_dbg(ql_dbg_init, base_vha, 0x00f1,
 			    "Registering for DIF/DIX type 1 and 3 protection.\n");
+			if (ql2xenabledif == 1)
+				prot = SHOST_DIX_TYPE0_PROTECTION;
 			scsi_host_set_prot(host,
-			    SHOST_DIF_TYPE1_PROTECTION
+			    prot | SHOST_DIF_TYPE1_PROTECTION
 			    | SHOST_DIF_TYPE2_PROTECTION
 			    | SHOST_DIF_TYPE3_PROTECTION
 			    | SHOST_DIX_TYPE1_PROTECTION
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index 062c97b..13b6357 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.07.03-k"
+#define QLA2XXX_VERSION      "8.03.07.07-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 82dee9a..d3bff42 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -22,7 +22,7 @@
 
 #include <asm/io.h>
 #include <mach/board.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/cpu.h>
 
 /* SPI register offsets */
diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c
index d240755..24cacff 100644
--- a/drivers/spi/spi-fsl-spi.c
+++ b/drivers/spi/spi-fsl-spi.c
@@ -825,6 +825,9 @@
 {
 	struct device *dev = mspi->dev;
 
+	if (!(mspi->flags & SPI_CPM_MODE))
+		return;
+
 	dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE);
 	dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE);
 	cpm_muram_free(cpm_muram_offset(mspi->tx_bd));
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 8ac6542..fa594d6 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -786,9 +786,11 @@
 		int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
 		if (cs_gpio < 0)
 			cs_gpio = mxc_platform_info->chipselect[i];
+
+		spi_imx->chipselect[i] = cs_gpio;
 		if (cs_gpio < 0)
 			continue;
-		spi_imx->chipselect[i] = cs_gpio;
+
 		ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME);
 		if (ret) {
 			while (i > 0) {
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index 1d23f38..6a80749 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -50,6 +50,8 @@
 #define PCH_RX_THOLD		7
 #define PCH_RX_THOLD_MAX	15
 
+#define PCH_TX_THOLD		2
+
 #define PCH_MAX_BAUDRATE	5000000
 #define PCH_MAX_FIFO_DEPTH	16
 
@@ -58,6 +60,7 @@
 #define PCH_SLEEP_TIME		10
 
 #define SSN_LOW			0x02U
+#define SSN_HIGH		0x03U
 #define SSN_NO_CONTROL		0x00U
 #define PCH_MAX_CS		0xFF
 #define PCI_DEVICE_ID_GE_SPI	0x8816
@@ -316,16 +319,19 @@
 
 	/* if transfer complete interrupt */
 	if (reg_spsr_val & SPSR_FI_BIT) {
-		if (tx_index < bpw_len)
+		if ((tx_index == bpw_len) && (rx_index == tx_index)) {
+			/* disable interrupts */
+			pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
+
+			/* transfer is completed;
+			   inform pch_spi_process_messages */
+			data->transfer_complete = true;
+			data->transfer_active = false;
+			wake_up(&data->wait);
+		} else {
 			dev_err(&data->master->dev,
 				"%s : Transfer is not completed", __func__);
-		/* disable interrupts */
-		pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL);
-
-		/* transfer is completed;inform pch_spi_process_messages */
-		data->transfer_complete = true;
-		data->transfer_active = false;
-		wake_up(&data->wait);
+		}
 	}
 }
 
@@ -348,16 +354,26 @@
 			"%s returning due to suspend\n", __func__);
 		return IRQ_NONE;
 	}
-	if (data->use_dma)
-		return IRQ_NONE;
 
 	io_remap_addr = data->io_remap_addr;
 	spsr = io_remap_addr + PCH_SPSR;
 
 	reg_spsr_val = ioread32(spsr);
 
-	if (reg_spsr_val & SPSR_ORF_BIT)
-		dev_err(&board_dat->pdev->dev, "%s Over run error", __func__);
+	if (reg_spsr_val & SPSR_ORF_BIT) {
+		dev_err(&board_dat->pdev->dev, "%s Over run error\n", __func__);
+		if (data->current_msg->complete != 0) {
+			data->transfer_complete = true;
+			data->current_msg->status = -EIO;
+			data->current_msg->complete(data->current_msg->context);
+			data->bcurrent_msg_processing = false;
+			data->current_msg = NULL;
+			data->cur_trans = NULL;
+		}
+	}
+
+	if (data->use_dma)
+		return IRQ_NONE;
 
 	/* Check if the interrupt is for SPI device */
 	if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) {
@@ -756,10 +772,6 @@
 
 	wait_event_interruptible(data->wait, data->transfer_complete);
 
-	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
-	dev_dbg(&data->master->dev,
-		"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
-
 	/* clear all interrupts */
 	pch_spi_writereg(data->master, PCH_SPSR,
 			 pch_spi_readreg(data->master, PCH_SPSR));
@@ -815,10 +827,11 @@
 	}
 }
 
-static void pch_spi_start_transfer(struct pch_spi_data *data)
+static int pch_spi_start_transfer(struct pch_spi_data *data)
 {
 	struct pch_spi_dma_ctrl *dma;
 	unsigned long flags;
+	int rtn;
 
 	dma = &data->dma;
 
@@ -833,19 +846,23 @@
 				 initiating the transfer. */
 	dev_dbg(&data->master->dev,
 		"%s:waiting for transfer to get over\n", __func__);
-	wait_event_interruptible(data->wait, data->transfer_complete);
+	rtn = wait_event_interruptible_timeout(data->wait,
+					       data->transfer_complete,
+					       msecs_to_jiffies(2 * HZ));
 
 	dma_sync_sg_for_cpu(&data->master->dev, dma->sg_rx_p, dma->nent,
 			    DMA_FROM_DEVICE);
+
+	dma_sync_sg_for_cpu(&data->master->dev, dma->sg_tx_p, dma->nent,
+			    DMA_FROM_DEVICE);
+	memset(data->dma.tx_buf_virt, 0, PAGE_SIZE);
+
 	async_tx_ack(dma->desc_rx);
 	async_tx_ack(dma->desc_tx);
 	kfree(dma->sg_tx_p);
 	kfree(dma->sg_rx_p);
 
 	spin_lock_irqsave(&data->lock, flags);
-	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
-	dev_dbg(&data->master->dev,
-		"%s:no more control over SSN-writing 0 to SSNXCR.", __func__);
 
 	/* clear fifo threshold, disable interrupts, disable SPI transfer */
 	pch_spi_setclr_reg(data->master, PCH_SPCR, 0,
@@ -858,6 +875,8 @@
 	pch_spi_clear_fifo(data->master);
 
 	spin_unlock_irqrestore(&data->lock, flags);
+
+	return rtn;
 }
 
 static void pch_dma_rx_complete(void *arg)
@@ -1023,8 +1042,7 @@
 	/* set receive fifo threshold and transmit fifo threshold */
 	pch_spi_setclr_reg(data->master, PCH_SPCR,
 			   ((size - 1) << SPCR_RFIC_FIELD) |
-			   ((PCH_MAX_FIFO_DEPTH - PCH_DMA_TRANS_SIZE) <<
-			    SPCR_TFIC_FIELD),
+			   (PCH_TX_THOLD << SPCR_TFIC_FIELD),
 			   MASK_RFIC_SPCR_BITS | MASK_TFIC_SPCR_BITS);
 
 	spin_unlock_irqrestore(&data->lock, flags);
@@ -1035,13 +1053,20 @@
 	/* offset, length setting */
 	sg = dma->sg_rx_p;
 	for (i = 0; i < num; i++, sg++) {
-		if (i == 0) {
-			sg->offset = 0;
+		if (i == (num - 2)) {
+			sg->offset = size * i;
+			sg->offset = sg->offset * (*bpw / 8);
 			sg_set_page(sg, virt_to_page(dma->rx_buf_virt), rem,
 				    sg->offset);
 			sg_dma_len(sg) = rem;
+		} else if (i == (num - 1)) {
+			sg->offset = size * (i - 1) + rem;
+			sg->offset = sg->offset * (*bpw / 8);
+			sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
+				    sg->offset);
+			sg_dma_len(sg) = size;
 		} else {
-			sg->offset = rem + size * (i - 1);
+			sg->offset = size * i;
 			sg->offset = sg->offset * (*bpw / 8);
 			sg_set_page(sg, virt_to_page(dma->rx_buf_virt), size,
 				    sg->offset);
@@ -1065,6 +1090,16 @@
 	dma->desc_rx = desc_rx;
 
 	/* TX */
+	if (data->bpw_len > PCH_DMA_TRANS_SIZE) {
+		num = data->bpw_len / PCH_DMA_TRANS_SIZE;
+		size = PCH_DMA_TRANS_SIZE;
+		rem = 16;
+	} else {
+		num = 1;
+		size = data->bpw_len;
+		rem = data->bpw_len;
+	}
+
 	dma->sg_tx_p = kzalloc(sizeof(struct scatterlist)*num, GFP_ATOMIC);
 	sg_init_table(dma->sg_tx_p, num); /* Initialize SG table */
 	/* offset, length setting */
@@ -1162,6 +1197,7 @@
 	if (data->use_dma)
 		pch_spi_request_dma(data,
 				    data->current_msg->spi->bits_per_word);
+	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL);
 	do {
 		/* If we are already processing a message get the next
 		transfer structure from the message otherwise retrieve
@@ -1184,7 +1220,8 @@
 
 		if (data->use_dma) {
 			pch_spi_handle_dma(data, &bpw);
-			pch_spi_start_transfer(data);
+			if (!pch_spi_start_transfer(data))
+				goto out;
 			pch_spi_copy_rx_data_for_dma(data, bpw);
 		} else {
 			pch_spi_set_tx(data, &bpw);
@@ -1222,6 +1259,8 @@
 
 	} while (data->cur_trans != NULL);
 
+out:
+	pch_spi_writereg(data->master, PCH_SSNXCR, SSN_HIGH);
 	if (data->use_dma)
 		pch_spi_release_dma(data);
 }
diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c
index 6859af0..7611def 100644
--- a/drivers/staging/comedi/drivers/ni_labpc.c
+++ b/drivers/staging/comedi/drivers/ni_labpc.c
@@ -241,8 +241,10 @@
 				   struct comedi_insn *insn,
 				   unsigned int *data);
 static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
-#ifdef CONFIG_COMEDI_PCI
+#ifdef CONFIG_ISA_DMA_API
 static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
+#endif
+#ifdef CONFIG_COMEDI_PCI
 static int labpc_find_device(struct comedi_device *dev, int bus, int slot);
 #endif
 static int labpc_dio_mem_callback(int dir, int port, int data,
diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c
index a3f5162..462fbc2 100644
--- a/drivers/staging/zcache/zcache-main.c
+++ b/drivers/staging/zcache/zcache-main.c
@@ -1242,7 +1242,7 @@
 	int ret = 0;
 
 	BUG_ON(!is_ephemeral(pool));
-	zbud_decompress(virt_to_page(data), pampd);
+	zbud_decompress((struct page *)(data), pampd);
 	zbud_free_and_delist((struct zbud_hdr *)pampd);
 	atomic_dec(&zcache_curr_eph_pampd_count);
 	return ret;
diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c
index 497b2e7..5b77316 100644
--- a/drivers/target/iscsi/iscsi_target_parameters.c
+++ b/drivers/target/iscsi/iscsi_target_parameters.c
@@ -1430,7 +1430,7 @@
 	u8 DataSequenceInOrder = 0;
 	u8 ErrorRecoveryLevel = 0, SessionType = 0;
 	u8 IFMarker = 0, OFMarker = 0;
-	u8 IFMarkInt_Reject = 0, OFMarkInt_Reject = 0;
+	u8 IFMarkInt_Reject = 1, OFMarkInt_Reject = 1;
 	u32 FirstBurstLength = 0, MaxBurstLength = 0;
 	struct iscsi_param *param = NULL;
 
diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c
index a0d23bc..f00137f 100644
--- a/drivers/target/iscsi/iscsi_target_util.c
+++ b/drivers/target/iscsi/iscsi_target_util.c
@@ -875,40 +875,6 @@
 }
 
 /*
- *	Used before iscsi_do[rx,tx]_data() to determine iov and [rx,tx]_marker
- *	array counts needed for sync and steering.
- */
-static int iscsit_determine_sync_and_steering_counts(
-	struct iscsi_conn *conn,
-	struct iscsi_data_count *count)
-{
-	u32 length = count->data_length;
-	u32 marker, markint;
-
-	count->sync_and_steering = 1;
-
-	marker = (count->type == ISCSI_RX_DATA) ?
-			conn->of_marker : conn->if_marker;
-	markint = (count->type == ISCSI_RX_DATA) ?
-			(conn->conn_ops->OFMarkInt * 4) :
-			(conn->conn_ops->IFMarkInt * 4);
-	count->ss_iov_count = count->iov_count;
-
-	while (length > 0) {
-		if (length >= marker) {
-			count->ss_iov_count += 3;
-			count->ss_marker_count += 2;
-
-			length -= marker;
-			marker = markint;
-		} else
-			length = 0;
-	}
-
-	return 0;
-}
-
-/*
  *	Setup conn->if_marker and conn->of_marker values based upon
  *	the initial marker-less interval. (see iSCSI v19 A.2)
  */
@@ -1290,7 +1256,7 @@
 	struct kvec iov;
 	u32 tx_hdr_size, data_len;
 	u32 offset = cmd->first_data_sg_off;
-	int tx_sent;
+	int tx_sent, iov_off;
 
 send_hdr:
 	tx_hdr_size = ISCSI_HDR_LEN;
@@ -1310,9 +1276,19 @@
 	}
 
 	data_len = cmd->tx_size - tx_hdr_size - cmd->padding;
-	if (conn->conn_ops->DataDigest)
+	/*
+	 * Set iov_off used by padding and data digest tx_data() calls below
+	 * in order to determine proper offset into cmd->iov_data[]
+	 */
+	if (conn->conn_ops->DataDigest) {
 		data_len -= ISCSI_CRC_LEN;
-
+		if (cmd->padding)
+			iov_off = (cmd->iov_data_count - 2);
+		else
+			iov_off = (cmd->iov_data_count - 1);
+	} else {
+		iov_off = (cmd->iov_data_count - 1);
+	}
 	/*
 	 * Perform sendpage() for each page in the scatterlist
 	 */
@@ -1341,8 +1317,7 @@
 
 send_padding:
 	if (cmd->padding) {
-		struct kvec *iov_p =
-			&cmd->iov_data[cmd->iov_data_count-1];
+		struct kvec *iov_p = &cmd->iov_data[iov_off++];
 
 		tx_sent = tx_data(conn, iov_p, 1, cmd->padding);
 		if (cmd->padding != tx_sent) {
@@ -1356,8 +1331,7 @@
 
 send_datacrc:
 	if (conn->conn_ops->DataDigest) {
-		struct kvec *iov_d =
-			&cmd->iov_data[cmd->iov_data_count];
+		struct kvec *iov_d = &cmd->iov_data[iov_off];
 
 		tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN);
 		if (ISCSI_CRC_LEN != tx_sent) {
@@ -1431,8 +1405,7 @@
 	struct iscsi_data_count *count)
 {
 	int data = count->data_length, rx_loop = 0, total_rx = 0, iov_len;
-	u32 rx_marker_val[count->ss_marker_count], rx_marker_iov = 0;
-	struct kvec iov[count->ss_iov_count], *iov_p;
+	struct kvec *iov_p;
 	struct msghdr msg;
 
 	if (!conn || !conn->sock || !conn->conn_ops)
@@ -1440,93 +1413,8 @@
 
 	memset(&msg, 0, sizeof(struct msghdr));
 
-	if (count->sync_and_steering) {
-		int size = 0;
-		u32 i, orig_iov_count = 0;
-		u32 orig_iov_len = 0, orig_iov_loc = 0;
-		u32 iov_count = 0, per_iov_bytes = 0;
-		u32 *rx_marker, old_rx_marker = 0;
-		struct kvec *iov_record;
-
-		memset(&rx_marker_val, 0,
-				count->ss_marker_count * sizeof(u32));
-		memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
-		iov_record = count->iov;
-		orig_iov_count = count->iov_count;
-		rx_marker = &conn->of_marker;
-
-		i = 0;
-		size = data;
-		orig_iov_len = iov_record[orig_iov_loc].iov_len;
-		while (size > 0) {
-			pr_debug("rx_data: #1 orig_iov_len %u,"
-			" orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
-			pr_debug("rx_data: #2 rx_marker %u, size"
-				" %u\n", *rx_marker, size);
-
-			if (orig_iov_len >= *rx_marker) {
-				iov[iov_count].iov_len = *rx_marker;
-				iov[iov_count++].iov_base =
-					(iov_record[orig_iov_loc].iov_base +
-						per_iov_bytes);
-
-				iov[iov_count].iov_len = (MARKER_SIZE / 2);
-				iov[iov_count++].iov_base =
-					&rx_marker_val[rx_marker_iov++];
-				iov[iov_count].iov_len = (MARKER_SIZE / 2);
-				iov[iov_count++].iov_base =
-					&rx_marker_val[rx_marker_iov++];
-				old_rx_marker = *rx_marker;
-
-				/*
-				 * OFMarkInt is in 32-bit words.
-				 */
-				*rx_marker = (conn->conn_ops->OFMarkInt * 4);
-				size -= old_rx_marker;
-				orig_iov_len -= old_rx_marker;
-				per_iov_bytes += old_rx_marker;
-
-				pr_debug("rx_data: #3 new_rx_marker"
-					" %u, size %u\n", *rx_marker, size);
-			} else {
-				iov[iov_count].iov_len = orig_iov_len;
-				iov[iov_count++].iov_base =
-					(iov_record[orig_iov_loc].iov_base +
-						per_iov_bytes);
-
-				per_iov_bytes = 0;
-				*rx_marker -= orig_iov_len;
-				size -= orig_iov_len;
-
-				if (size)
-					orig_iov_len =
-					iov_record[++orig_iov_loc].iov_len;
-
-				pr_debug("rx_data: #4 new_rx_marker"
-					" %u, size %u\n", *rx_marker, size);
-			}
-		}
-		data += (rx_marker_iov * (MARKER_SIZE / 2));
-
-		iov_p	= &iov[0];
-		iov_len	= iov_count;
-
-		if (iov_count > count->ss_iov_count) {
-			pr_err("iov_count: %d, count->ss_iov_count:"
-				" %d\n", iov_count, count->ss_iov_count);
-			return -1;
-		}
-		if (rx_marker_iov > count->ss_marker_count) {
-			pr_err("rx_marker_iov: %d, count->ss_marker"
-				"_count: %d\n", rx_marker_iov,
-				count->ss_marker_count);
-			return -1;
-		}
-	} else {
-		iov_p = count->iov;
-		iov_len	= count->iov_count;
-	}
+	iov_p = count->iov;
+	iov_len	= count->iov_count;
 
 	while (total_rx < data) {
 		rx_loop = kernel_recvmsg(conn->sock, &msg, iov_p, iov_len,
@@ -1541,16 +1429,6 @@
 				rx_loop, total_rx, data);
 	}
 
-	if (count->sync_and_steering) {
-		int j;
-		for (j = 0; j < rx_marker_iov; j++) {
-			pr_debug("rx_data: #5 j: %d, offset: %d\n",
-				j, rx_marker_val[j]);
-			conn->of_marker_offset = rx_marker_val[j];
-		}
-		total_rx -= (rx_marker_iov * (MARKER_SIZE / 2));
-	}
-
 	return total_rx;
 }
 
@@ -1559,8 +1437,7 @@
 	struct iscsi_data_count *count)
 {
 	int data = count->data_length, total_tx = 0, tx_loop = 0, iov_len;
-	u32 tx_marker_val[count->ss_marker_count], tx_marker_iov = 0;
-	struct kvec iov[count->ss_iov_count], *iov_p;
+	struct kvec *iov_p;
 	struct msghdr msg;
 
 	if (!conn || !conn->sock || !conn->conn_ops)
@@ -1573,98 +1450,8 @@
 
 	memset(&msg, 0, sizeof(struct msghdr));
 
-	if (count->sync_and_steering) {
-		int size = 0;
-		u32 i, orig_iov_count = 0;
-		u32 orig_iov_len = 0, orig_iov_loc = 0;
-		u32 iov_count = 0, per_iov_bytes = 0;
-		u32 *tx_marker, old_tx_marker = 0;
-		struct kvec *iov_record;
-
-		memset(&tx_marker_val, 0,
-			count->ss_marker_count * sizeof(u32));
-		memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec));
-
-		iov_record = count->iov;
-		orig_iov_count = count->iov_count;
-		tx_marker = &conn->if_marker;
-
-		i = 0;
-		size = data;
-		orig_iov_len = iov_record[orig_iov_loc].iov_len;
-		while (size > 0) {
-			pr_debug("tx_data: #1 orig_iov_len %u,"
-			" orig_iov_loc %u\n", orig_iov_len, orig_iov_loc);
-			pr_debug("tx_data: #2 tx_marker %u, size"
-				" %u\n", *tx_marker, size);
-
-			if (orig_iov_len >= *tx_marker) {
-				iov[iov_count].iov_len = *tx_marker;
-				iov[iov_count++].iov_base =
-					(iov_record[orig_iov_loc].iov_base +
-						per_iov_bytes);
-
-				tx_marker_val[tx_marker_iov] =
-						(size - *tx_marker);
-				iov[iov_count].iov_len = (MARKER_SIZE / 2);
-				iov[iov_count++].iov_base =
-					&tx_marker_val[tx_marker_iov++];
-				iov[iov_count].iov_len = (MARKER_SIZE / 2);
-				iov[iov_count++].iov_base =
-					&tx_marker_val[tx_marker_iov++];
-				old_tx_marker = *tx_marker;
-
-				/*
-				 * IFMarkInt is in 32-bit words.
-				 */
-				*tx_marker = (conn->conn_ops->IFMarkInt * 4);
-				size -= old_tx_marker;
-				orig_iov_len -= old_tx_marker;
-				per_iov_bytes += old_tx_marker;
-
-				pr_debug("tx_data: #3 new_tx_marker"
-					" %u, size %u\n", *tx_marker, size);
-				pr_debug("tx_data: #4 offset %u\n",
-					tx_marker_val[tx_marker_iov-1]);
-			} else {
-				iov[iov_count].iov_len = orig_iov_len;
-				iov[iov_count++].iov_base
-					= (iov_record[orig_iov_loc].iov_base +
-						per_iov_bytes);
-
-				per_iov_bytes = 0;
-				*tx_marker -= orig_iov_len;
-				size -= orig_iov_len;
-
-				if (size)
-					orig_iov_len =
-					iov_record[++orig_iov_loc].iov_len;
-
-				pr_debug("tx_data: #5 new_tx_marker"
-					" %u, size %u\n", *tx_marker, size);
-			}
-		}
-
-		data += (tx_marker_iov * (MARKER_SIZE / 2));
-
-		iov_p = &iov[0];
-		iov_len = iov_count;
-
-		if (iov_count > count->ss_iov_count) {
-			pr_err("iov_count: %d, count->ss_iov_count:"
-				" %d\n", iov_count, count->ss_iov_count);
-			return -1;
-		}
-		if (tx_marker_iov > count->ss_marker_count) {
-			pr_err("tx_marker_iov: %d, count->ss_marker"
-				"_count: %d\n", tx_marker_iov,
-				count->ss_marker_count);
-			return -1;
-		}
-	} else {
-		iov_p = count->iov;
-		iov_len = count->iov_count;
-	}
+	iov_p = count->iov;
+	iov_len = count->iov_count;
 
 	while (total_tx < data) {
 		tx_loop = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len,
@@ -1679,9 +1466,6 @@
 					tx_loop, total_tx, data);
 	}
 
-	if (count->sync_and_steering)
-		total_tx -= (tx_marker_iov * (MARKER_SIZE / 2));
-
 	return total_tx;
 }
 
@@ -1702,12 +1486,6 @@
 	c.data_length = data;
 	c.type = ISCSI_RX_DATA;
 
-	if (conn->conn_ops->OFMarker &&
-	   (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
-		if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
-			return -1;
-	}
-
 	return iscsit_do_rx_data(conn, &c);
 }
 
@@ -1728,12 +1506,6 @@
 	c.data_length = data;
 	c.type = ISCSI_TX_DATA;
 
-	if (conn->conn_ops->IFMarker &&
-	   (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) {
-		if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0)
-			return -1;
-	}
-
 	return iscsit_do_tx_data(conn, &c);
 }
 
diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c
index 89ae923..f04d4ef 100644
--- a/drivers/target/target_core_cdb.c
+++ b/drivers/target/target_core_cdb.c
@@ -24,6 +24,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/ctype.h>
 #include <asm/unaligned.h>
 #include <scsi/scsi.h>
 
@@ -154,6 +155,37 @@
 	return 0;
 }
 
+static void
+target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf_off)
+{
+	unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0];
+	unsigned char *buf = buf_off;
+	int cnt = 0, next = 1;
+	/*
+	 * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on
+	 * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field
+	 * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION
+	 * to complete the payload.  These are based from VPD=0x80 PRODUCT SERIAL
+	 * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure
+	 * per device uniqeness.
+	 */
+	while (*p != '\0') {
+		if (cnt >= 13)
+			break;
+		if (!isxdigit(*p)) {
+			p++;
+			continue;
+		}
+		if (next != 0) {
+			buf[cnt++] |= hex_to_bin(*p++);
+			next = 0;
+		} else {
+			buf[cnt] = hex_to_bin(*p++) << 4;
+			next = 1;
+		}
+	}
+}
+
 /*
  * Device identification VPD, for a complete list of
  * DESIGNATOR TYPEs see spc4r17 Table 459.
@@ -219,8 +251,7 @@
 	 * VENDOR_SPECIFIC_IDENTIFIER and
 	 * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION
 	 */
-	buf[off++] |= hex_to_bin(dev->se_sub_dev->t10_wwn.unit_serial[0]);
-	hex2bin(&buf[off], &dev->se_sub_dev->t10_wwn.unit_serial[1], 12);
+	target_parse_naa_6h_vendor_specific(dev, &buf[off]);
 
 	len = 20;
 	off = (len + 4);
diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c
index 8d0c58e..a4b0a8d 100644
--- a/drivers/target/target_core_transport.c
+++ b/drivers/target/target_core_transport.c
@@ -977,15 +977,17 @@
 {
 	struct se_device *dev = container_of(work, struct se_device,
 					qf_work_queue);
+	LIST_HEAD(qf_cmd_list);
 	struct se_cmd *cmd, *cmd_tmp;
 
 	spin_lock_irq(&dev->qf_cmd_lock);
-	list_for_each_entry_safe(cmd, cmd_tmp, &dev->qf_cmd_list, se_qf_node) {
+	list_splice_init(&dev->qf_cmd_list, &qf_cmd_list);
+	spin_unlock_irq(&dev->qf_cmd_lock);
 
+	list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) {
 		list_del(&cmd->se_qf_node);
 		atomic_dec(&dev->dev_qf_count);
 		smp_mb__after_atomic_dec();
-		spin_unlock_irq(&dev->qf_cmd_lock);
 
 		pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue"
 			" context: %s\n", cmd->se_tfo->get_fabric_name(), cmd,
@@ -997,10 +999,7 @@
 		 * has been added to head of queue
 		 */
 		transport_add_cmd_to_queue(cmd, cmd->t_state);
-
-		spin_lock_irq(&dev->qf_cmd_lock);
 	}
-	spin_unlock_irq(&dev->qf_cmd_lock);
 }
 
 unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd)
diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h
index bd4fe21..3749d8b 100644
--- a/drivers/target/tcm_fc/tcm_fc.h
+++ b/drivers/target/tcm_fc/tcm_fc.h
@@ -98,8 +98,7 @@
 	struct list_head list;		/* linkage in ft_lport_acl tpg_list */
 	struct list_head lun_list;	/* head of LUNs */
 	struct se_portal_group se_tpg;
-	struct task_struct *thread;	/* processing thread */
-	struct se_queue_obj qobj;	/* queue for processing thread */
+	struct workqueue_struct *workqueue;
 };
 
 struct ft_lport_acl {
@@ -110,16 +109,10 @@
 	struct se_wwn fc_lport_wwn;
 };
 
-enum ft_cmd_state {
-	FC_CMD_ST_NEW = 0,
-	FC_CMD_ST_REJ
-};
-
 /*
  * Commands
  */
 struct ft_cmd {
-	enum ft_cmd_state state;
 	u32 lun;                        /* LUN from request */
 	struct ft_sess *sess;		/* session held for cmd */
 	struct fc_seq *seq;		/* sequence in exchange mgr */
@@ -127,7 +120,7 @@
 	struct fc_frame *req_frame;
 	unsigned char *cdb;		/* pointer to CDB inside frame */
 	u32 write_data_len;		/* data received on writes */
-	struct se_queue_req se_req;
+	struct work_struct work;
 	/* Local sense buffer */
 	unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER];
 	u32 was_ddp_setup:1;		/* Set only if ddp is setup */
@@ -177,7 +170,6 @@
 /*
  * other internal functions.
  */
-int ft_thread(void *);
 void ft_recv_req(struct ft_sess *, struct fc_frame *);
 struct ft_tpg *ft_lport_find_tpg(struct fc_lport *);
 struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *);
diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c
index 5654dc2..80fbcde 100644
--- a/drivers/target/tcm_fc/tfc_cmd.c
+++ b/drivers/target/tcm_fc/tfc_cmd.c
@@ -62,8 +62,8 @@
 	int count;
 
 	se_cmd = &cmd->se_cmd;
-	pr_debug("%s: cmd %p state %d sess %p seq %p se_cmd %p\n",
-		caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd);
+	pr_debug("%s: cmd %p sess %p seq %p se_cmd %p\n",
+		caller, cmd, cmd->sess, cmd->seq, se_cmd);
 	pr_debug("%s: cmd %p cdb %p\n",
 		caller, cmd, cmd->cdb);
 	pr_debug("%s: cmd %p lun %d\n", caller, cmd, cmd->lun);
@@ -90,38 +90,6 @@
 		16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0);
 }
 
-static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd)
-{
-	struct ft_tpg *tpg = sess->tport->tpg;
-	struct se_queue_obj *qobj = &tpg->qobj;
-	unsigned long flags;
-
-	qobj = &sess->tport->tpg->qobj;
-	spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
-	list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list);
-	atomic_inc(&qobj->queue_cnt);
-	spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-
-	wake_up_process(tpg->thread);
-}
-
-static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj)
-{
-	unsigned long flags;
-	struct se_queue_req *qr;
-
-	spin_lock_irqsave(&qobj->cmd_queue_lock, flags);
-	if (list_empty(&qobj->qobj_list)) {
-		spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-		return NULL;
-	}
-	qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list);
-	list_del(&qr->qr_list);
-	atomic_dec(&qobj->queue_cnt);
-	spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags);
-	return container_of(qr, struct ft_cmd, se_req);
-}
-
 static void ft_free_cmd(struct ft_cmd *cmd)
 {
 	struct fc_frame *fp;
@@ -282,9 +250,7 @@
 
 int ft_get_cmd_state(struct se_cmd *se_cmd)
 {
-	struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd);
-
-	return cmd->state;
+	return 0;
 }
 
 int ft_is_state_remove(struct se_cmd *se_cmd)
@@ -505,6 +471,8 @@
 	return 0;
 }
 
+static void ft_send_work(struct work_struct *work);
+
 /*
  * Handle incoming FCP command.
  */
@@ -523,7 +491,9 @@
 		goto busy;
 	}
 	cmd->req_frame = fp;		/* hold frame during cmd */
-	ft_queue_cmd(sess, cmd);
+
+	INIT_WORK(&cmd->work, ft_send_work);
+	queue_work(sess->tport->tpg->workqueue, &cmd->work);
 	return;
 
 busy:
@@ -563,12 +533,13 @@
 /*
  * Send new command to target.
  */
-static void ft_send_cmd(struct ft_cmd *cmd)
+static void ft_send_work(struct work_struct *work)
 {
+	struct ft_cmd *cmd = container_of(work, struct ft_cmd, work);
 	struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame);
 	struct se_cmd *se_cmd;
 	struct fcp_cmnd *fcp;
-	int data_dir;
+	int data_dir = 0;
 	u32 data_len;
 	int task_attr;
 	int ret;
@@ -675,42 +646,3 @@
 err:
 	ft_send_resp_code_and_free(cmd, FCP_CMND_FIELDS_INVALID);
 }
-
-/*
- * Handle request in the command thread.
- */
-static void ft_exec_req(struct ft_cmd *cmd)
-{
-	pr_debug("cmd state %x\n", cmd->state);
-	switch (cmd->state) {
-	case FC_CMD_ST_NEW:
-		ft_send_cmd(cmd);
-		break;
-	default:
-		break;
-	}
-}
-
-/*
- * Processing thread.
- * Currently one thread per tpg.
- */
-int ft_thread(void *arg)
-{
-	struct ft_tpg *tpg = arg;
-	struct se_queue_obj *qobj = &tpg->qobj;
-	struct ft_cmd *cmd;
-
-	while (!kthread_should_stop()) {
-		schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT);
-		if (kthread_should_stop())
-			goto out;
-
-		cmd = ft_dequeue_cmd(qobj);
-		if (cmd)
-			ft_exec_req(cmd);
-	}
-
-out:
-	return 0;
-}
diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c
index b15879d..8fa39b7 100644
--- a/drivers/target/tcm_fc/tfc_conf.c
+++ b/drivers/target/tcm_fc/tfc_conf.c
@@ -327,7 +327,6 @@
 	tpg->index = index;
 	tpg->lport_acl = lacl;
 	INIT_LIST_HEAD(&tpg->lun_list);
-	transport_init_queue_obj(&tpg->qobj);
 
 	ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg,
 				tpg, TRANSPORT_TPG_TYPE_NORMAL);
@@ -336,8 +335,8 @@
 		return NULL;
 	}
 
-	tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index);
-	if (IS_ERR(tpg->thread)) {
+	tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1);
+	if (!tpg->workqueue) {
 		kfree(tpg);
 		return NULL;
 	}
@@ -356,7 +355,7 @@
 	pr_debug("del tpg %s\n",
 		    config_item_name(&tpg->se_tpg.tpg_group.cg_item));
 
-	kthread_stop(tpg->thread);
+	destroy_workqueue(tpg->workqueue);
 
 	/* Wait for sessions to be freed thru RCU, for BUG_ON below */
 	synchronize_rcu();
diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c
index c37f4cd..d35ea5a 100644
--- a/drivers/target/tcm_fc/tfc_io.c
+++ b/drivers/target/tcm_fc/tfc_io.c
@@ -219,43 +219,41 @@
 	if (cmd->was_ddp_setup) {
 		BUG_ON(!ep);
 		BUG_ON(!lport);
-	}
-
-	/*
-	 * Doesn't expect payload if DDP is setup. Payload
-	 * is expected to be copied directly to user buffers
-	 * due to DDP (Large Rx offload),
-	 */
-	buf = fc_frame_payload_get(fp, 1);
-	if (buf)
-		pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
+		/*
+		 * Since DDP (Large Rx offload) was setup for this request,
+		 * payload is expected to be copied directly to user buffers.
+		 */
+		buf = fc_frame_payload_get(fp, 1);
+		if (buf)
+			pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, "
 				"cmd->sg_cnt 0x%x. DDP was setup"
 				" hence not expected to receive frame with "
-				"payload, Frame will be dropped if "
-				"'Sequence Initiative' bit in f_ctl is "
+				"payload, Frame will be dropped if"
+				"'Sequence Initiative' bit in f_ctl is"
 				"not set\n", __func__, ep->xid, f_ctl,
 				cmd->sg, cmd->sg_cnt);
-	/*
- 	 * Invalidate HW DDP context if it was setup for respective
- 	 * command. Invalidation of HW DDP context is requited in both
- 	 * situation (success and error). 
- 	 */
-	ft_invl_hw_context(cmd);
+		/*
+		 * Invalidate HW DDP context if it was setup for respective
+		 * command. Invalidation of HW DDP context is requited in both
+		 * situation (success and error).
+		 */
+		ft_invl_hw_context(cmd);
 
-	/*
-	 * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
-	 * write data frame is received successfully where payload is
-	 * posted directly to user buffer and only the last frame's
-	 * header is posted in receive queue.
-	 *
-	 * If "Sequence Initiative (TSI)" bit is not set, means error
-	 * condition w.r.t. DDP, hence drop the packet and let explict
-	 * ABORTS from other end of exchange timer trigger the recovery.
-	 */
-	if (f_ctl & FC_FC_SEQ_INIT)
-		goto last_frame;
-	else
-		goto drop;
+		/*
+		 * If "Sequence Initiative (TSI)" bit set in f_ctl, means last
+		 * write data frame is received successfully where payload is
+		 * posted directly to user buffer and only the last frame's
+		 * header is posted in receive queue.
+		 *
+		 * If "Sequence Initiative (TSI)" bit is not set, means error
+		 * condition w.r.t. DDP, hence drop the packet and let explict
+		 * ABORTS from other end of exchange timer trigger the recovery.
+		 */
+		if (f_ctl & FC_FC_SEQ_INIT)
+			goto last_frame;
+		else
+			goto drop;
+	}
 
 	rel_off = ntohl(fh->fh_parm_offset);
 	frame_len = fr_len(fp);
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b922f5d..caba673 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -46,7 +46,7 @@
 
 #ifdef CONFIG_ARM
 #include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #endif
 
 #define PDC_BUFFER_SIZE		512
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 225123b..58be715 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -4450,7 +4450,7 @@
 
 #if defined(CONFIG_ETRAX_RS485)
 #if defined(CONFIG_ETRAX_RS485_ON_PA)
-	if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit,
+	if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit,
 			rs485_pa_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");
@@ -4459,7 +4459,7 @@
 	}
 #endif
 #if defined(CONFIG_ETRAX_RS485_ON_PORT_G)
-	if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit,
+	if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit,
 			rs485_port_g_bit)) {
 		printk(KERN_CRIT "ETRAX100LX serial: Could not allocate "
 			"RS485 pin\n");
diff --git a/drivers/usb/host/ohci-pnx4008.c b/drivers/usb/host/ohci-pnx4008.c
index 653d6a6..d1b4193 100644
--- a/drivers/usb/host/ohci-pnx4008.c
+++ b/drivers/usb/host/ohci-pnx4008.c
@@ -26,7 +26,7 @@
 
 #include <mach/platform.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 1e96d1f..723f823 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -761,7 +761,7 @@
 	memset(buf, 0, retval);
 	status = 0;
 
-	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC;
+	mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC;
 
 	spin_lock_irqsave(&xhci->lock, flags);
 	/* For each port, did anything change?  If so, set that bit in buf. */
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 54139a2..952e2de 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1934,8 +1934,10 @@
 	int status = -EINPROGRESS;
 	struct urb_priv *urb_priv;
 	struct xhci_ep_ctx *ep_ctx;
+	struct list_head *tmp;
 	u32 trb_comp_code;
 	int ret = 0;
+	int td_num = 0;
 
 	slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
 	xdev = xhci->devs[slot_id];
@@ -1957,6 +1959,12 @@
 		return -ENODEV;
 	}
 
+	/* Count current td numbers if ep->skip is set */
+	if (ep->skip) {
+		list_for_each(tmp, &ep_ring->td_list)
+			td_num++;
+	}
+
 	event_dma = le64_to_cpu(event->buffer);
 	trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
 	/* Look for common error cases */
@@ -2068,7 +2076,18 @@
 			goto cleanup;
 		}
 
+		/* We've skipped all the TDs on the ep ring when ep->skip set */
+		if (ep->skip && td_num == 0) {
+			ep->skip = false;
+			xhci_dbg(xhci, "All tds on the ep_ring skipped. "
+						"Clear skip flag.\n");
+			ret = 0;
+			goto cleanup;
+		}
+
 		td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
+		if (ep->skip)
+			td_num--;
 
 		/* Is this a TRB in the currently executing TD? */
 		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 8bdf25a..f9a3f62 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -35,7 +35,7 @@
 
 #include <mach/hardware.h>
 #include <mach/memory.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <mach/cputype.h>
 
 #include <asm/mach-types.h>
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 817ab60..dda9206 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -21,7 +21,7 @@
 
 #include <mach/board.h>
 #include <mach/cpu.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include <video/atmel_lcdc.h>
 
diff --git a/drivers/video/omap/lcd_apollon.c b/drivers/video/omap/lcd_apollon.c
index 10459d8..4b24f54 100644
--- a/drivers/video/omap/lcd_apollon.c
+++ b/drivers/video/omap/lcd_apollon.c
@@ -24,7 +24,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include "omapfb.h"
 
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/omap/lcd_h3.c
index 8df6887..622ad83 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/omap/lcd_h3.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/tps65010.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/omap/lcd_inn1610.c
index 9fff86f..12cc52a 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/omap/lcd_inn1610.c
@@ -22,7 +22,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 #define MODULE_NAME	"omapfb-lcd_h3"
diff --git a/drivers/video/omap/lcd_ldp.c b/drivers/video/omap/lcd_ldp.c
index 0f5952c..0624664 100644
--- a/drivers/video/omap/lcd_ldp.c
+++ b/drivers/video/omap/lcd_ldp.c
@@ -26,7 +26,7 @@
 #include <linux/delay.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/omap/lcd_osk.c
index b87e8b8..6f8d13c 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/omap/lcd_osk.c
@@ -23,7 +23,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include "omapfb.h"
 
diff --git a/drivers/video/omap/lcd_overo.c b/drivers/video/omap/lcd_overo.c
index 564933f..b8fd5b2 100644
--- a/drivers/video/omap/lcd_overo.c
+++ b/drivers/video/omap/lcd_overo.c
@@ -23,7 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c/twl.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include <plat/mux.h>
 #include <asm/mach-types.h>
 
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/omap/lcd_palmtt.c
index ff0e6d7..b51b332 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/omap/lcd_palmtt.c
@@ -29,7 +29,7 @@
 #include <linux/module.h>
 #include <linux/io.h>
 
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 #include "omapfb.h"
 
 static int palmtt_panel_init(struct lcd_panel *panel,
diff --git a/drivers/video/pnx4008/sdum.c b/drivers/video/pnx4008/sdum.c
index 5ec4f2d..50e0039 100644
--- a/drivers/video/pnx4008/sdum.c
+++ b/drivers/video/pnx4008/sdum.c
@@ -30,7 +30,7 @@
 #include <linux/clk.h>
 #include <linux/gfp.h>
 #include <asm/uaccess.h>
-#include <mach/gpio.h>
+#include <asm/gpio.h>
 
 #include "sdum.h"
 #include "fbcommon.h"
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 410fba4..809cbda 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -494,15 +494,16 @@
 		asminline_call(&cmn_regs, cru_rom_addr);
 	die_nmi_called = 1;
 	spin_unlock_irqrestore(&rom_lock, rom_pl);
-	if (!is_icru) {
-		if (cmn_regs.u1.ral == 0) {
-			printk(KERN_WARNING "hpwdt: An NMI occurred, "
-				"but unable to determine source.\n");
-		}
-	}
 
 	if (allow_kdump)
 		hpwdt_stop();
+
+	if (!is_icru) {
+		if (cmn_regs.u1.ral == 0) {
+			panic("An NMI occurred, "
+				"but unable to determine source.\n");
+		}
+	}
 	panic("An NMI occurred, please see the Integrated "
 		"Management Log for details.\n");
 
diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c
index 7d82ada..102aed0 100644
--- a/drivers/watchdog/lantiq_wdt.c
+++ b/drivers/watchdog/lantiq_wdt.c
@@ -51,16 +51,16 @@
 static void
 ltq_wdt_enable(void)
 {
-	ltq_wdt_timeout = ltq_wdt_timeout *
+	unsigned long int timeout = ltq_wdt_timeout *
 			(ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
-	if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
-		ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
+	if (timeout > LTQ_MAX_TIMEOUT)
+		timeout = LTQ_MAX_TIMEOUT;
 
 	/* write the first password magic */
 	ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
 	/* write the second magic plus the configuration and new timeout */
 	ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
-		LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
+		LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR);
 }
 
 static void
diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c
index 3066a51..eaca366 100644
--- a/drivers/watchdog/sbc_epx_c3.c
+++ b/drivers/watchdog/sbc_epx_c3.c
@@ -173,7 +173,7 @@
 	.notifier_call = epx_c3_notify_sys,
 };
 
-static const char banner[] __initdata = KERN_INFO PFX
+static const char banner[] __initconst = KERN_INFO PFX
 	"Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n";
 
 static int __init watchdog_init(void)
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index d33520d..1199da0 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -59,7 +59,7 @@
 
 static int watchdog_ping(struct watchdog_device *wddev)
 {
-	if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+	if (test_bit(WDOG_ACTIVE, &wddev->status)) {
 		if (wddev->ops->ping)
 			return wddev->ops->ping(wddev);  /* ping the watchdog */
 		else
@@ -81,12 +81,12 @@
 {
 	int err;
 
-	if (!test_bit(WDOG_ACTIVE, &wdd->status)) {
+	if (!test_bit(WDOG_ACTIVE, &wddev->status)) {
 		err = wddev->ops->start(wddev);
 		if (err < 0)
 			return err;
 
-		set_bit(WDOG_ACTIVE, &wdd->status);
+		set_bit(WDOG_ACTIVE, &wddev->status);
 	}
 	return 0;
 }
@@ -105,18 +105,18 @@
 {
 	int err = -EBUSY;
 
-	if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) {
+	if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) {
 		pr_info("%s: nowayout prevents watchdog to be stopped!\n",
-							wdd->info->identity);
+							wddev->info->identity);
 		return err;
 	}
 
-	if (test_bit(WDOG_ACTIVE, &wdd->status)) {
+	if (test_bit(WDOG_ACTIVE, &wddev->status)) {
 		err = wddev->ops->stop(wddev);
 		if (err < 0)
 			return err;
 
-		clear_bit(WDOG_ACTIVE, &wdd->status);
+		clear_bit(WDOG_ACTIVE, &wddev->status);
 	}
 	return 0;
 }
diff --git a/drivers/xen/events.c b/drivers/xen/events.c
index da70f5c..7523719 100644
--- a/drivers/xen/events.c
+++ b/drivers/xen/events.c
@@ -54,7 +54,7 @@
  * This lock protects updates to the following mapping and reference-count
  * arrays. The lock does not need to be acquired to read the mapping tables.
  */
-static DEFINE_SPINLOCK(irq_mapping_update_lock);
+static DEFINE_MUTEX(irq_mapping_update_lock);
 
 static LIST_HEAD(xen_irq_list_head);
 
@@ -631,7 +631,7 @@
 	int irq = -1;
 	struct physdev_irq irq_op;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	irq = find_irq_by_gsi(gsi);
 	if (irq != -1) {
@@ -684,7 +684,7 @@
 				handle_edge_irq, name);
 
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 
 	return irq;
 }
@@ -710,7 +710,7 @@
 {
 	int irq, ret;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	irq = xen_allocate_irq_dynamic();
 	if (irq == -1)
@@ -724,10 +724,10 @@
 	if (ret < 0)
 		goto error_irq;
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 	return irq;
 error_irq:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 	xen_free_irq(irq);
 	return -1;
 }
@@ -740,7 +740,7 @@
 	struct irq_info *info = info_for_irq(irq);
 	int rc = -ENOENT;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	desc = irq_to_desc(irq);
 	if (!desc)
@@ -766,7 +766,7 @@
 	xen_free_irq(irq);
 
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 	return rc;
 }
 
@@ -776,7 +776,7 @@
 
 	struct irq_info *info;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	list_for_each_entry(info, &xen_irq_list_head, list) {
 		if (info == NULL || info->type != IRQT_PIRQ)
@@ -787,7 +787,7 @@
 	}
 	irq = -1;
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 
 	return irq;
 }
@@ -802,7 +802,7 @@
 {
 	int irq;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	irq = evtchn_to_irq[evtchn];
 
@@ -818,7 +818,7 @@
 	}
 
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 
 	return irq;
 }
@@ -829,7 +829,7 @@
 	struct evtchn_bind_ipi bind_ipi;
 	int evtchn, irq;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	irq = per_cpu(ipi_to_irq, cpu)[ipi];
 
@@ -853,7 +853,7 @@
 	}
 
  out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 	return irq;
 }
 
@@ -878,7 +878,7 @@
 	struct evtchn_bind_virq bind_virq;
 	int evtchn, irq;
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	irq = per_cpu(virq_to_irq, cpu)[virq];
 
@@ -903,7 +903,7 @@
 	}
 
 out:
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 
 	return irq;
 }
@@ -913,7 +913,7 @@
 	struct evtchn_close close;
 	int evtchn = evtchn_from_irq(irq);
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	if (VALID_EVTCHN(evtchn)) {
 		close.port = evtchn;
@@ -943,7 +943,7 @@
 
 	xen_free_irq(irq);
 
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 }
 
 int bind_evtchn_to_irqhandler(unsigned int evtchn,
@@ -1279,7 +1279,7 @@
 	   will also be masked. */
 	disable_irq(irq);
 
-	spin_lock(&irq_mapping_update_lock);
+	mutex_lock(&irq_mapping_update_lock);
 
 	/* After resume the irq<->evtchn mappings are all cleared out */
 	BUG_ON(evtchn_to_irq[evtchn] != -1);
@@ -1289,7 +1289,7 @@
 
 	xen_irq_info_evtchn_init(irq, evtchn);
 
-	spin_unlock(&irq_mapping_update_lock);
+	mutex_unlock(&irq_mapping_update_lock);
 
 	/* new event channels are always bound to cpu 0 */
 	irq_set_affinity(irq, cpumask_of(0));
diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c
index e0c2807..181fa81 100644
--- a/drivers/zorro/zorro.c
+++ b/drivers/zorro/zorro.c
@@ -148,10 +148,10 @@
 	}
 	platform_set_drvdata(pdev, bus);
 
-	/* Register all devices */
 	pr_info("Zorro: Probing AutoConfig expansion devices: %u device%s\n",
 		 zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
 
+	/* First identify all devices ... */
 	for (i = 0; i < zorro_num_autocon; i++) {
 		z = &zorro_autocon[i];
 		z->id = (z->rom.er_Manufacturer<<16) | (z->rom.er_Product<<8);
@@ -172,6 +172,11 @@
 		dev_set_name(&z->dev, "%02x", i);
 		z->dev.parent = &bus->dev;
 		z->dev.bus = &zorro_bus_type;
+	}
+
+	/* ... then register them */
+	for (i = 0; i < zorro_num_autocon; i++) {
+		z = &zorro_autocon[i];
 		error = device_register(&z->dev);
 		if (error) {
 			dev_err(&bus->dev, "Error registering device %s\n",
diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c
index 3c3abff..e4e57d5 100644
--- a/fs/btrfs/file.c
+++ b/fs/btrfs/file.c
@@ -1036,11 +1036,13 @@
  * on error we return an unlocked page and the error value
  * on success we return a locked page and 0
  */
-static int prepare_uptodate_page(struct page *page, u64 pos)
+static int prepare_uptodate_page(struct page *page, u64 pos,
+				 bool force_uptodate)
 {
 	int ret = 0;
 
-	if ((pos & (PAGE_CACHE_SIZE - 1)) && !PageUptodate(page)) {
+	if (((pos & (PAGE_CACHE_SIZE - 1)) || force_uptodate) &&
+	    !PageUptodate(page)) {
 		ret = btrfs_readpage(NULL, page);
 		if (ret)
 			return ret;
@@ -1061,7 +1063,7 @@
 static noinline int prepare_pages(struct btrfs_root *root, struct file *file,
 			 struct page **pages, size_t num_pages,
 			 loff_t pos, unsigned long first_index,
-			 size_t write_bytes)
+			 size_t write_bytes, bool force_uptodate)
 {
 	struct extent_state *cached_state = NULL;
 	int i;
@@ -1086,10 +1088,11 @@
 		}
 
 		if (i == 0)
-			err = prepare_uptodate_page(pages[i], pos);
+			err = prepare_uptodate_page(pages[i], pos,
+						    force_uptodate);
 		if (i == num_pages - 1)
 			err = prepare_uptodate_page(pages[i],
-						    pos + write_bytes);
+						    pos + write_bytes, false);
 		if (err) {
 			page_cache_release(pages[i]);
 			faili = i - 1;
@@ -1158,6 +1161,7 @@
 	size_t num_written = 0;
 	int nrptrs;
 	int ret = 0;
+	bool force_page_uptodate = false;
 
 	nrptrs = min((iov_iter_count(i) + PAGE_CACHE_SIZE - 1) /
 		     PAGE_CACHE_SIZE, PAGE_CACHE_SIZE /
@@ -1200,7 +1204,8 @@
 		 * contents of pages from loop to loop
 		 */
 		ret = prepare_pages(root, file, pages, num_pages,
-				    pos, first_index, write_bytes);
+				    pos, first_index, write_bytes,
+				    force_page_uptodate);
 		if (ret) {
 			btrfs_delalloc_release_space(inode,
 					num_pages << PAGE_CACHE_SHIFT);
@@ -1217,12 +1222,15 @@
 		if (copied < write_bytes)
 			nrptrs = 1;
 
-		if (copied == 0)
+		if (copied == 0) {
+			force_page_uptodate = true;
 			dirty_pages = 0;
-		else
+		} else {
+			force_page_uptodate = false;
 			dirty_pages = (copied + offset +
 				       PAGE_CACHE_SIZE - 1) >>
 				       PAGE_CACHE_SHIFT;
+		}
 
 		/*
 		 * If we had a short copy we need to release the excess delaloc
@@ -1817,6 +1825,11 @@
 		goto out;
 	case SEEK_DATA:
 	case SEEK_HOLE:
+		if (offset >= i_size_read(inode)) {
+			mutex_unlock(&inode->i_mutex);
+			return -ENXIO;
+		}
+
 		ret = find_desired_extent(inode, &offset, origin);
 		if (ret) {
 			mutex_unlock(&inode->i_mutex);
@@ -1825,11 +1838,11 @@
 	}
 
 	if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) {
-		ret = -EINVAL;
+		offset = -EINVAL;
 		goto out;
 	}
 	if (offset > inode->i_sb->s_maxbytes) {
-		ret = -EINVAL;
+		offset = -EINVAL;
 		goto out;
 	}
 
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 4d14de6..b2d004a 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -4018,7 +4018,8 @@
 		memcpy(&location, dentry->d_fsdata, sizeof(struct btrfs_key));
 		kfree(dentry->d_fsdata);
 		dentry->d_fsdata = NULL;
-		d_clear_need_lookup(dentry);
+		/* This thing is hashed, drop it for now */
+		d_drop(dentry);
 	} else {
 		ret = btrfs_inode_by_name(dir, dentry, &location);
 	}
@@ -4085,7 +4086,15 @@
 static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry,
 				   struct nameidata *nd)
 {
-	return d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+	struct dentry *ret;
+
+	ret = d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry);
+	if (unlikely(d_need_lookup(dentry))) {
+		spin_lock(&dentry->d_lock);
+		dentry->d_flags &= ~DCACHE_NEED_LOOKUP;
+		spin_unlock(&dentry->d_lock);
+	}
+	return ret;
 }
 
 unsigned char btrfs_filetype_table[] = {
@@ -4125,7 +4134,8 @@
 
 	/* special case for "." */
 	if (filp->f_pos == 0) {
-		over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR);
+		over = filldir(dirent, ".", 1,
+			       filp->f_pos, btrfs_ino(inode), DT_DIR);
 		if (over)
 			return 0;
 		filp->f_pos = 1;
@@ -4134,7 +4144,7 @@
 	if (filp->f_pos == 1) {
 		u64 pino = parent_ino(filp->f_path.dentry);
 		over = filldir(dirent, "..", 2,
-			       2, pino, DT_DIR);
+			       filp->f_pos, pino, DT_DIR);
 		if (over)
 			return 0;
 		filp->f_pos = 2;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 3351b1b..538f65a 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -2177,6 +2177,11 @@
 	if (!(src_file->f_mode & FMODE_READ))
 		goto out_fput;
 
+	/* don't make the dst file partly checksummed */
+	if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) !=
+	    (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM))
+		goto out_fput;
+
 	ret = -EISDIR;
 	if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode))
 		goto out_fput;
@@ -2226,6 +2231,10 @@
 			goto out_unlock;
 	}
 
+	/* truncate page cache pages from target inode range */
+	truncate_inode_pages_range(&inode->i_data, destoff,
+				   PAGE_CACHE_ALIGN(destoff + len) - 1);
+
 	/* do any pending delalloc/csum calc on src, one way or
 	   another, and lock file content */
 	while (1) {
@@ -2242,10 +2251,6 @@
 		btrfs_wait_ordered_range(src, off, len);
 	}
 
-	/* truncate page cache pages from target inode range */
-	truncate_inode_pages_range(&inode->i_data, off,
-				   ALIGN(off + len, PAGE_CACHE_SIZE) - 1);
-
 	/* clone data */
 	key.objectid = btrfs_ino(src);
 	key.type = BTRFS_EXTENT_DATA_KEY;
@@ -2323,7 +2328,12 @@
 			else
 				new_key.offset = destoff;
 
-			trans = btrfs_start_transaction(root, 1);
+			/*
+			 * 1 - adjusting old extent (we may have to split it)
+			 * 1 - add new extent
+			 * 1 - inode update
+			 */
+			trans = btrfs_start_transaction(root, 3);
 			if (IS_ERR(trans)) {
 				ret = PTR_ERR(trans);
 				goto out;
@@ -2442,7 +2452,6 @@
 			if (endoff > inode->i_size)
 				btrfs_i_size_write(inode, endoff);
 
-			BTRFS_I(inode)->flags = BTRFS_I(src)->flags;
 			ret = btrfs_update_inode(trans, root, inode);
 			BUG_ON(ret);
 			btrfs_end_transaction(trans, root);
diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c
index e76bfeb..30acd22 100644
--- a/fs/cifs/cifsencrypt.c
+++ b/fs/cifs/cifsencrypt.c
@@ -351,9 +351,7 @@
 build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp)
 {
 	unsigned int dlen;
-	unsigned int wlen;
-	unsigned int size = 6 * sizeof(struct ntlmssp2_name);
-	__le64  curtime;
+	unsigned int size = 2 * sizeof(struct ntlmssp2_name);
 	char *defdmname = "WORKGROUP";
 	unsigned char *blobptr;
 	struct ntlmssp2_name *attrptr;
@@ -365,15 +363,14 @@
 	}
 
 	dlen = strlen(ses->domainName);
-	wlen = strlen(ses->server->hostname);
 
-	/* The length of this blob is a size which is
-	 * six times the size of a structure which holds name/size +
-	 * two times the unicode length of a domain name +
-	 * two times the unicode length of a server name +
-	 * size of a timestamp (which is 8 bytes).
+	/*
+	 * The length of this blob is two times the size of a
+	 * structure (av pair) which holds name/size
+	 * ( for NTLMSSP_AV_NB_DOMAIN_NAME followed by NTLMSSP_AV_EOL ) +
+	 * unicode length of a netbios domain name
 	 */
-	ses->auth_key.len = size + 2 * (2 * dlen) + 2 * (2 * wlen) + 8;
+	ses->auth_key.len = size + 2 * dlen;
 	ses->auth_key.response = kzalloc(ses->auth_key.len, GFP_KERNEL);
 	if (!ses->auth_key.response) {
 		ses->auth_key.len = 0;
@@ -384,44 +381,15 @@
 	blobptr = ses->auth_key.response;
 	attrptr = (struct ntlmssp2_name *) blobptr;
 
+	/*
+	 * As defined in MS-NTLM 3.3.2, just this av pair field
+	 * is sufficient as part of the temp
+	 */
 	attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME);
 	attrptr->length = cpu_to_le16(2 * dlen);
 	blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
 	cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
 
-	blobptr += 2 * dlen;
-	attrptr = (struct ntlmssp2_name *) blobptr;
-
-	attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_COMPUTER_NAME);
-	attrptr->length = cpu_to_le16(2 * wlen);
-	blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
-	cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
-	blobptr += 2 * wlen;
-	attrptr = (struct ntlmssp2_name *) blobptr;
-
-	attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_DOMAIN_NAME);
-	attrptr->length = cpu_to_le16(2 * dlen);
-	blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
-	cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp);
-
-	blobptr += 2 * dlen;
-	attrptr = (struct ntlmssp2_name *) blobptr;
-
-	attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_COMPUTER_NAME);
-	attrptr->length = cpu_to_le16(2 * wlen);
-	blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
-	cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp);
-
-	blobptr += 2 * wlen;
-	attrptr = (struct ntlmssp2_name *) blobptr;
-
-	attrptr->type = cpu_to_le16(NTLMSSP_AV_TIMESTAMP);
-	attrptr->length = cpu_to_le16(sizeof(__le64));
-	blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name);
-	curtime = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
-	memcpy(blobptr, &curtime, sizeof(__le64));
-
 	return 0;
 }
 
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index f93eb94..54b8f1e 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -548,6 +548,12 @@
 		struct inode *dir = dentry->d_inode;
 		struct dentry *child;
 
+		if (!dir) {
+			dput(dentry);
+			dentry = ERR_PTR(-ENOENT);
+			break;
+		}
+
 		/* skip separators */
 		while (*s == sep)
 			s++;
@@ -563,10 +569,6 @@
 		mutex_unlock(&dir->i_mutex);
 		dput(dentry);
 		dentry = child;
-		if (!dentry->d_inode) {
-			dput(dentry);
-			dentry = ERR_PTR(-ENOENT);
-		}
 	} while (!IS_ERR(dentry));
 	_FreeXid(xid);
 	kfree(full_path);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index aac37d9..a80f7bd 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -4079,7 +4079,8 @@
 	T2_FNEXT_RSP_PARMS *parms;
 	char *response_data;
 	int rc = 0;
-	int bytes_returned, name_len;
+	int bytes_returned;
+	unsigned int name_len;
 	__u16 params, byte_count;
 
 	cFYI(1, "In FindNext");
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 633c246..f4af4cc 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1298,7 +1298,7 @@
 			/* ignore */
 		} else if (strnicmp(data, "guest", 5) == 0) {
 			/* ignore */
-		} else if (strnicmp(data, "rw", 2) == 0) {
+		} else if (strnicmp(data, "rw", 2) == 0 && strlen(data) == 2) {
 			/* ignore */
 		} else if (strnicmp(data, "ro", 2) == 0) {
 			/* ignore */
@@ -1401,7 +1401,7 @@
 			vol->server_ino = 1;
 		} else if (strnicmp(data, "noserverino", 9) == 0) {
 			vol->server_ino = 0;
-		} else if (strnicmp(data, "rwpidforward", 4) == 0) {
+		} else if (strnicmp(data, "rwpidforward", 12) == 0) {
 			vol->rwpidforward = 1;
 		} else if (strnicmp(data, "cifsacl", 7) == 0) {
 			vol->cifs_acl = 1;
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 04da6ac..12661e1 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -1134,7 +1134,7 @@
 		return bh;
 	if (buffer_uptodate(bh))
 		return bh;
-	ll_rw_block(READ_META, 1, &bh);
+	ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
 	wait_on_buffer(bh);
 	if (buffer_uptodate(bh))
 		return bh;
@@ -2807,7 +2807,7 @@
 		trace_ext3_load_inode(inode);
 		get_bh(bh);
 		bh->b_end_io = end_buffer_read_sync;
-		submit_bh(READ_META, bh);
+		submit_bh(READ | REQ_META | REQ_PRIO, bh);
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
 			ext3_error(inode->i_sb, "ext3_get_inode_loc",
diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c
index 5571708..0629e09 100644
--- a/fs/ext3/namei.c
+++ b/fs/ext3/namei.c
@@ -922,7 +922,8 @@
 				bh = ext3_getblk(NULL, dir, b++, 0, &err);
 				bh_use[ra_max] = bh;
 				if (bh)
-					ll_rw_block(READ_META, 1, &bh);
+					ll_rw_block(READ | REQ_META | REQ_PRIO,
+						    1, &bh);
 			}
 		}
 		if ((bh = bh_use[ra_ptr++]) == NULL)
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index 18d2558..986e238 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -647,7 +647,7 @@
 		return bh;
 	if (buffer_uptodate(bh))
 		return bh;
-	ll_rw_block(READ_META, 1, &bh);
+	ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
 	wait_on_buffer(bh);
 	if (buffer_uptodate(bh))
 		return bh;
@@ -3298,7 +3298,7 @@
 		trace_ext4_load_inode(inode);
 		get_bh(bh);
 		bh->b_end_io = end_buffer_read_sync;
-		submit_bh(READ_META, bh);
+		submit_bh(READ | REQ_META | REQ_PRIO, bh);
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh)) {
 			EXT4_ERROR_INODE_BLOCK(inode, block,
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c
index f8068c7..1c924fa 100644
--- a/fs/ext4/namei.c
+++ b/fs/ext4/namei.c
@@ -922,7 +922,8 @@
 				bh = ext4_getblk(NULL, dir, b++, 0, &err);
 				bh_use[ra_max] = bh;
 				if (bh)
-					ll_rw_block(READ_META, 1, &bh);
+					ll_rw_block(READ | REQ_META | REQ_PRIO,
+						    1, &bh);
 			}
 		}
 		if ((bh = bh_use[ra_ptr++]) == NULL)
diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c
index 85c6292..5986464 100644
--- a/fs/gfs2/log.c
+++ b/fs/gfs2/log.c
@@ -624,9 +624,9 @@
 	bh->b_end_io = end_buffer_write_sync;
 	get_bh(bh);
 	if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags))
-		submit_bh(WRITE_SYNC | REQ_META, bh);
+		submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh);
 	else
-		submit_bh(WRITE_FLUSH_FUA | REQ_META, bh);
+		submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh);
 	wait_on_buffer(bh);
 
 	if (!buffer_uptodate(bh))
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 747238c..be29858 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -37,7 +37,7 @@
 {
 	struct buffer_head *bh, *head;
 	int nr_underway = 0;
-	int write_op = REQ_META |
+	int write_op = REQ_META | REQ_PRIO |
 		(wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE);
 
 	BUG_ON(!PageLocked(page));
@@ -225,7 +225,7 @@
 	}
 	bh->b_end_io = end_buffer_read_sync;
 	get_bh(bh);
-	submit_bh(READ_SYNC | REQ_META, bh);
+	submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh);
 	if (!(flags & DIO_WAIT))
 		return 0;
 
@@ -435,7 +435,7 @@
 	if (buffer_uptodate(first_bh))
 		goto out;
 	if (!buffer_locked(first_bh))
-		ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh);
+		ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh);
 
 	dblock++;
 	extlen--;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 3bc073a..079587e 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -224,7 +224,7 @@
 
 	bio->bi_end_io = end_bio_io_page;
 	bio->bi_private = page;
-	submit_bio(READ_SYNC | REQ_META, bio);
+	submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio);
 	wait_on_page_locked(page);
 	bio_put(bio);
 	if (!PageUptodate(page)) {
diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c
index 42e8d23..0e8bb13 100644
--- a/fs/gfs2/quota.c
+++ b/fs/gfs2/quota.c
@@ -709,7 +709,7 @@
 		set_buffer_uptodate(bh);
 
 	if (!buffer_uptodate(bh)) {
-		ll_rw_block(READ_META, 1, &bh);
+		ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
 		wait_on_buffer(bh);
 		if (!buffer_uptodate(bh))
 			goto unlock_out;
diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c
index c106ca2..d24a9b6 100644
--- a/fs/hfsplus/super.c
+++ b/fs/hfsplus/super.c
@@ -344,6 +344,7 @@
 	struct inode *root, *inode;
 	struct qstr str;
 	struct nls_table *nls = NULL;
+	u64 last_fs_block, last_fs_page;
 	int err;
 
 	err = -EINVAL;
@@ -399,9 +400,13 @@
 	if (!sbi->rsrc_clump_blocks)
 		sbi->rsrc_clump_blocks = 1;
 
-	err = generic_check_addressable(sbi->alloc_blksz_shift,
-					sbi->total_blocks);
-	if (err) {
+	err = -EFBIG;
+	last_fs_block = sbi->total_blocks - 1;
+	last_fs_page = (last_fs_block << sbi->alloc_blksz_shift) >>
+			PAGE_CACHE_SHIFT;
+
+	if ((last_fs_block > (sector_t)(~0ULL) >> (sbi->alloc_blksz_shift - 9)) ||
+	    (last_fs_page > (pgoff_t)(~0ULL))) {
 		printk(KERN_ERR "hfs: filesystem size too large.\n");
 		goto out_free_vhdr;
 	}
@@ -525,8 +530,8 @@
 out_close_ext_tree:
 	hfs_btree_close(sbi->ext_tree);
 out_free_vhdr:
-	kfree(sbi->s_vhdr);
-	kfree(sbi->s_backup_vhdr);
+	kfree(sbi->s_vhdr_buf);
+	kfree(sbi->s_backup_vhdr_buf);
 out_unload_nls:
 	unload_nls(sbi->nls);
 	unload_nls(nls);
diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c
index 10e515a..7daf4b8 100644
--- a/fs/hfsplus/wrapper.c
+++ b/fs/hfsplus/wrapper.c
@@ -272,9 +272,9 @@
 	return 0;
 
 out_free_backup_vhdr:
-	kfree(sbi->s_backup_vhdr);
+	kfree(sbi->s_backup_vhdr_buf);
 out_free_vhdr:
-	kfree(sbi->s_vhdr);
+	kfree(sbi->s_vhdr_buf);
 out:
 	return error;
 }
diff --git a/fs/namei.c b/fs/namei.c
index b52bc68..0b3138d 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -721,12 +721,6 @@
 	if (!path->dentry->d_op || !path->dentry->d_op->d_automount)
 		return -EREMOTE;
 
-	/* We don't want to mount if someone supplied AT_NO_AUTOMOUNT
-	 * and this is the terminal part of the path.
-	 */
-	if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT))
-		return -EISDIR; /* we actually want to stop here */
-
 	/* We don't want to mount if someone's just doing a stat -
 	 * unless they're stat'ing a directory and appended a '/' to
 	 * the name.
@@ -739,7 +733,7 @@
 	 * of the daemon to instantiate them before they can be used.
 	 */
 	if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY |
-		     LOOKUP_OPEN | LOOKUP_CREATE)) &&
+		     LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) &&
 	    path->dentry->d_inode)
 		return -EISDIR;
 
@@ -2616,6 +2610,7 @@
 	if (!dir->i_op->rmdir)
 		return -EPERM;
 
+	dget(dentry);
 	mutex_lock(&dentry->d_inode->i_mutex);
 
 	error = -EBUSY;
@@ -2636,6 +2631,7 @@
 
 out:
 	mutex_unlock(&dentry->d_inode->i_mutex);
+	dput(dentry);
 	if (!error)
 		d_delete(dentry);
 	return error;
@@ -3025,6 +3021,7 @@
 	if (error)
 		return error;
 
+	dget(new_dentry);
 	if (target)
 		mutex_lock(&target->i_mutex);
 
@@ -3045,6 +3042,7 @@
 out:
 	if (target)
 		mutex_unlock(&target->i_mutex);
+	dput(new_dentry);
 	if (!error)
 		if (!(old_dir->i_sb->s_type->fs_flags & FS_RENAME_DOES_D_MOVE))
 			d_move(old_dentry,new_dentry);
diff --git a/fs/namespace.c b/fs/namespace.c
index 22bfe82..b4febb2 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -1757,7 +1757,7 @@
 		return err;
 	if (!old_name || !*old_name)
 		return -EINVAL;
-	err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
+	err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path);
 	if (err)
 		return err;
 
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index 1ec1a85..3e93e9a 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -56,6 +56,9 @@
 	NFS4_SESSION_DRAINING,
 };
 
+#define NFS4_RENEW_TIMEOUT		0x01
+#define NFS4_RENEW_DELEGATION_CB	0x02
+
 struct nfs4_minor_version_ops {
 	u32	minor_version;
 
@@ -225,7 +228,7 @@
 };
 
 struct nfs4_state_maintenance_ops {
-	int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *);
+	int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *, unsigned);
 	struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *);
 	int (*renew_lease)(struct nfs_client *, struct rpc_cred *);
 };
@@ -237,8 +240,6 @@
 extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *);
 extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *);
 extern int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred);
-extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *);
-extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *);
 extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *);
 extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *);
 extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc);
@@ -349,6 +350,7 @@
 extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t);
 extern void nfs4_schedule_lease_recovery(struct nfs_client *);
 extern void nfs4_schedule_state_manager(struct nfs_client *);
+extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp);
 extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *);
 extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags);
 extern void nfs41_handle_recall_slot(struct nfs_client *clp);
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 8c77039..4700fae 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -3374,9 +3374,13 @@
 
 	if (task->tk_status < 0) {
 		/* Unless we're shutting down, schedule state recovery! */
-		if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+		if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0)
+			return;
+		if (task->tk_status != NFS4ERR_CB_PATH_DOWN) {
 			nfs4_schedule_lease_recovery(clp);
-		return;
+			return;
+		}
+		nfs4_schedule_path_down_recovery(clp);
 	}
 	do_renew_lease(clp, timestamp);
 }
@@ -3386,7 +3390,7 @@
 	.rpc_release = nfs4_renew_release,
 };
 
-int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
 {
 	struct rpc_message msg = {
 		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_RENEW],
@@ -3395,9 +3399,11 @@
 	};
 	struct nfs4_renewdata *data;
 
+	if (renew_flags == 0)
+		return 0;
 	if (!atomic_inc_not_zero(&clp->cl_count))
 		return -EIO;
-	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	data = kmalloc(sizeof(*data), GFP_NOFS);
 	if (data == NULL)
 		return -ENOMEM;
 	data->client = clp;
@@ -3406,7 +3412,7 @@
 			&nfs4_renew_ops, data);
 }
 
-int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred)
 {
 	struct rpc_message msg = {
 		.rpc_proc	= &nfs4_procedures[NFSPROC4_CLNT_RENEW],
@@ -5504,11 +5510,13 @@
 	return rpc_run_task(&task_setup_data);
 }
 
-static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred)
+static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags)
 {
 	struct rpc_task *task;
 	int ret = 0;
 
+	if ((renew_flags & NFS4_RENEW_TIMEOUT) == 0)
+		return 0;
 	task = _nfs41_proc_sequence(clp, cred);
 	if (IS_ERR(task))
 		ret = PTR_ERR(task);
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index df8e7f3..dc484c0 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -60,6 +60,7 @@
 	struct rpc_cred *cred;
 	long lease;
 	unsigned long last, now;
+	unsigned renew_flags = 0;
 
 	ops = clp->cl_mvops->state_renewal_ops;
 	dprintk("%s: start\n", __func__);
@@ -72,18 +73,23 @@
 	last = clp->cl_last_renewal;
 	now = jiffies;
 	/* Are we close to a lease timeout? */
-	if (time_after(now, last + lease/3)) {
+	if (time_after(now, last + lease/3))
+		renew_flags |= NFS4_RENEW_TIMEOUT;
+	if (nfs_delegations_present(clp))
+		renew_flags |= NFS4_RENEW_DELEGATION_CB;
+
+	if (renew_flags != 0) {
 		cred = ops->get_state_renewal_cred_locked(clp);
 		spin_unlock(&clp->cl_lock);
 		if (cred == NULL) {
-			if (!nfs_delegations_present(clp)) {
+			if (!(renew_flags & NFS4_RENEW_DELEGATION_CB)) {
 				set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state);
 				goto out;
 			}
 			nfs_expire_all_delegations(clp);
 		} else {
 			/* Queue an asynchronous RENEW. */
-			ops->sched_state_renewal(clp, cred);
+			ops->sched_state_renewal(clp, cred, renew_flags);
 			put_rpccred(cred);
 			goto out_exp;
 		}
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 72ab97e..39914be 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -1038,6 +1038,12 @@
 	nfs4_schedule_state_manager(clp);
 }
 
+void nfs4_schedule_path_down_recovery(struct nfs_client *clp)
+{
+	nfs_handle_cb_pathdown(clp);
+	nfs4_schedule_state_manager(clp);
+}
+
 static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state)
 {
 
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index b961cea..5b19b6a 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -2035,9 +2035,6 @@
 		sb->s_blocksize = nfs_block_bits(server->wsize,
 						 &sb->s_blocksize_bits);
 
-	if (server->flags & NFS_MOUNT_NOAC)
-		sb->s_flags |= MS_SYNCHRONOUS;
-
 	sb->s_bdi = &server->backing_dev_info;
 
 	nfs_super_set_maxbytes(sb, server->maxfilesize);
@@ -2249,6 +2246,10 @@
 	if (server->flags & NFS_MOUNT_UNSHARED)
 		compare_super = NULL;
 
+	/* -o noac implies -o sync */
+	if (server->flags & NFS_MOUNT_NOAC)
+		sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
 	/* Get a superblock - note that we may end up sharing one that already exists */
 	s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
@@ -2361,6 +2362,10 @@
 	if (server->flags & NFS_MOUNT_UNSHARED)
 		compare_super = NULL;
 
+	/* -o noac implies -o sync */
+	if (server->flags & NFS_MOUNT_NOAC)
+		sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
 	/* Get a superblock - note that we may end up sharing one that already exists */
 	s = sget(&nfs_fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
@@ -2628,6 +2633,10 @@
 	if (server->flags & NFS4_MOUNT_UNSHARED)
 		compare_super = NULL;
 
+	/* -o noac implies -o sync */
+	if (server->flags & NFS_MOUNT_NOAC)
+		sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
 	/* Get a superblock - note that we may end up sharing one that already exists */
 	s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
@@ -2789,7 +2798,7 @@
 		goto out_put_mnt_ns;
 
 	ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt,
-			export_path, LOOKUP_FOLLOW, &path);
+			export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
 
 	nfs_referral_loop_unprotect();
 	put_mnt_ns(ns_private);
@@ -2916,6 +2925,10 @@
 	if (server->flags & NFS4_MOUNT_UNSHARED)
 		compare_super = NULL;
 
+	/* -o noac implies -o sync */
+	if (server->flags & NFS_MOUNT_NOAC)
+		sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
 	/* Get a superblock - note that we may end up sharing one that already exists */
 	s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
@@ -3003,6 +3016,10 @@
 	if (server->flags & NFS4_MOUNT_UNSHARED)
 		compare_super = NULL;
 
+	/* -o noac implies -o sync */
+	if (server->flags & NFS_MOUNT_NOAC)
+		sb_mntdata.mntflags |= MS_SYNCHRONOUS;
+
 	/* Get a superblock - note that we may end up sharing one that already exists */
 	s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata);
 	if (IS_ERR(s)) {
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index b39b37f..c9bd2a6 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -958,7 +958,7 @@
 		if (!data)
 			goto out_bad;
 		data->pagevec[0] = page;
-		nfs_write_rpcsetup(req, data, wsize, offset, desc->pg_ioflags);
+		nfs_write_rpcsetup(req, data, len, offset, desc->pg_ioflags);
 		list_add(&data->list, res);
 		requests++;
 		nbytes -= len;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 25b6a88..5afaa58 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -877,30 +877,54 @@
 	struct numa_maps md;
 };
 
-static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty)
+static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty,
+			unsigned long nr_pages)
 {
 	int count = page_mapcount(page);
 
-	md->pages++;
+	md->pages += nr_pages;
 	if (pte_dirty || PageDirty(page))
-		md->dirty++;
+		md->dirty += nr_pages;
 
 	if (PageSwapCache(page))
-		md->swapcache++;
+		md->swapcache += nr_pages;
 
 	if (PageActive(page) || PageUnevictable(page))
-		md->active++;
+		md->active += nr_pages;
 
 	if (PageWriteback(page))
-		md->writeback++;
+		md->writeback += nr_pages;
 
 	if (PageAnon(page))
-		md->anon++;
+		md->anon += nr_pages;
 
 	if (count > md->mapcount_max)
 		md->mapcount_max = count;
 
-	md->node[page_to_nid(page)]++;
+	md->node[page_to_nid(page)] += nr_pages;
+}
+
+static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma,
+		unsigned long addr)
+{
+	struct page *page;
+	int nid;
+
+	if (!pte_present(pte))
+		return NULL;
+
+	page = vm_normal_page(vma, addr, pte);
+	if (!page)
+		return NULL;
+
+	if (PageReserved(page))
+		return NULL;
+
+	nid = page_to_nid(page);
+	if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
+		return NULL;
+
+	return page;
 }
 
 static int gather_pte_stats(pmd_t *pmd, unsigned long addr,
@@ -912,26 +936,32 @@
 	pte_t *pte;
 
 	md = walk->private;
+	spin_lock(&walk->mm->page_table_lock);
+	if (pmd_trans_huge(*pmd)) {
+		if (pmd_trans_splitting(*pmd)) {
+			spin_unlock(&walk->mm->page_table_lock);
+			wait_split_huge_page(md->vma->anon_vma, pmd);
+		} else {
+			pte_t huge_pte = *(pte_t *)pmd;
+			struct page *page;
+
+			page = can_gather_numa_stats(huge_pte, md->vma, addr);
+			if (page)
+				gather_stats(page, md, pte_dirty(huge_pte),
+						HPAGE_PMD_SIZE/PAGE_SIZE);
+			spin_unlock(&walk->mm->page_table_lock);
+			return 0;
+		}
+	} else {
+		spin_unlock(&walk->mm->page_table_lock);
+	}
+
 	orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
 	do {
-		struct page *page;
-		int nid;
-
-		if (!pte_present(*pte))
-			continue;
-
-		page = vm_normal_page(md->vma, addr, *pte);
+		struct page *page = can_gather_numa_stats(*pte, md->vma, addr);
 		if (!page)
 			continue;
-
-		if (PageReserved(page))
-			continue;
-
-		nid = page_to_nid(page);
-		if (!node_isset(nid, node_states[N_HIGH_MEMORY]))
-			continue;
-
-		gather_stats(page, md, pte_dirty(*pte));
+		gather_stats(page, md, pte_dirty(*pte), 1);
 
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 	pte_unmap_unlock(orig_pte, ptl);
@@ -952,7 +982,7 @@
 		return 0;
 
 	md = walk->private;
-	gather_stats(page, md, pte_dirty(*pte));
+	gather_stats(page, md, pte_dirty(*pte), 1);
 	return 0;
 }
 
diff --git a/fs/quota/quota.c b/fs/quota/quota.c
index b34bdb2..10b6be3 100644
--- a/fs/quota/quota.c
+++ b/fs/quota/quota.c
@@ -355,7 +355,7 @@
 	 * resolution (think about autofs) and thus deadlocks could arise.
 	 */
 	if (cmds == Q_QUOTAON) {
-		ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path);
+		ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
 		if (ret)
 			pathp = ERR_PTR(ret);
 		else
diff --git a/fs/stat.c b/fs/stat.c
index ba5316f..78a3aa8 100644
--- a/fs/stat.c
+++ b/fs/stat.c
@@ -81,8 +81,6 @@
 
 	if (!(flag & AT_SYMLINK_NOFOLLOW))
 		lookup_flags |= LOOKUP_FOLLOW;
-	if (flag & AT_NO_AUTOMOUNT)
-		lookup_flags |= LOOKUP_NO_AUTOMOUNT;
 	if (flag & AT_EMPTY_PATH)
 		lookup_flags |= LOOKUP_EMPTY;
 
diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c
index 63e971e..8c37dde 100644
--- a/fs/xfs/xfs_aops.c
+++ b/fs/xfs/xfs_aops.c
@@ -1300,6 +1300,7 @@
 	bool			is_async)
 {
 	struct xfs_ioend	*ioend = iocb->private;
+	struct inode		*inode = ioend->io_inode;
 
 	/*
 	 * blockdev_direct_IO can return an error even after the I/O
@@ -1331,7 +1332,7 @@
 	}
 
 	/* XXX: probably should move into the real I/O completion handler */
-	inode_dio_done(ioend->io_inode);
+	inode_dio_done(inode);
 }
 
 STATIC ssize_t
diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h
index 98999cf1..feb91219 100644
--- a/include/linux/basic_mmio_gpio.h
+++ b/include/linux/basic_mmio_gpio.h
@@ -63,15 +63,10 @@
 	return container_of(gc, struct bgpio_chip, gc);
 }
 
-int __devexit bgpio_remove(struct bgpio_chip *bgc);
-int __devinit bgpio_init(struct bgpio_chip *bgc,
-			 struct device *dev,
-			 unsigned long sz,
-			 void __iomem *dat,
-			 void __iomem *set,
-			 void __iomem *clr,
-			 void __iomem *dirout,
-			 void __iomem *dirin,
-			 bool big_endian);
+int bgpio_remove(struct bgpio_chip *bgc);
+int bgpio_init(struct bgpio_chip *bgc, struct device *dev,
+	       unsigned long sz, void __iomem *dat, void __iomem *set,
+	       void __iomem *clr, void __iomem *dirout, void __iomem *dirin,
+	       bool big_endian);
 
 #endif /* __BASIC_MMIO_GPIO_H */
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 32f0076..71fc53b 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -124,6 +124,7 @@
 
 	__REQ_SYNC,		/* request is sync (sync write or read) */
 	__REQ_META,		/* metadata io request */
+	__REQ_PRIO,		/* boost priority in cfq */
 	__REQ_DISCARD,		/* request to discard sectors */
 	__REQ_SECURE,		/* secure discard (used with __REQ_DISCARD) */
 
@@ -161,14 +162,15 @@
 #define REQ_FAILFAST_DRIVER	(1 << __REQ_FAILFAST_DRIVER)
 #define REQ_SYNC		(1 << __REQ_SYNC)
 #define REQ_META		(1 << __REQ_META)
+#define REQ_PRIO		(1 << __REQ_PRIO)
 #define REQ_DISCARD		(1 << __REQ_DISCARD)
 #define REQ_NOIDLE		(1 << __REQ_NOIDLE)
 
 #define REQ_FAILFAST_MASK \
 	(REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER)
 #define REQ_COMMON_MASK \
-	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \
-	 REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
+	(REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \
+	 REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE)
 #define REQ_CLONE_MASK		REQ_COMMON_MASK
 
 #define REQ_RAHEAD		(1 << __REQ_RAHEAD)
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 84b15d5..7fbaa91 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -873,7 +873,6 @@
 	struct list_head list;
 	struct list_head cb_list;
 	unsigned int should_sort;
-	unsigned int count;
 };
 #define BLK_MAX_REQUEST_COUNT 16
 
diff --git a/include/linux/fs.h b/include/linux/fs.h
index c2bd68f..277f497 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -162,10 +162,8 @@
 #define READA			RWA_MASK
 
 #define READ_SYNC		(READ | REQ_SYNC)
-#define READ_META		(READ | REQ_META)
 #define WRITE_SYNC		(WRITE | REQ_SYNC | REQ_NOIDLE)
 #define WRITE_ODIRECT		(WRITE | REQ_SYNC)
-#define WRITE_META		(WRITE | REQ_META)
 #define WRITE_FLUSH		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
 #define WRITE_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
 #define WRITE_FLUSH_FUA		(WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
diff --git a/include/linux/irqdomain.h b/include/linux/irqdomain.h
index e807ad6..3ad553e 100644
--- a/include/linux/irqdomain.h
+++ b/include/linux/irqdomain.h
@@ -80,6 +80,7 @@
 #endif /* CONFIG_IRQ_DOMAIN */
 
 #if defined(CONFIG_IRQ_DOMAIN) && defined(CONFIG_OF_IRQ)
+extern struct irq_domain_ops irq_domain_simple_ops;
 extern void irq_domain_add_simple(struct device_node *controller, int irq_base);
 extern void irq_domain_generate_simple(const struct of_device_id *match,
 					u64 phys_base, unsigned int irq_start);
diff --git a/include/linux/kvm.h b/include/linux/kvm.h
index 2c366b5..aace6b8 100644
--- a/include/linux/kvm.h
+++ b/include/linux/kvm.h
@@ -553,6 +553,7 @@
 #define KVM_CAP_SPAPR_TCE 63
 #define KVM_CAP_PPC_SMT 64
 #define KVM_CAP_PPC_RMA	65
+#define KVM_CAP_S390_GMAP 71
 
 #ifdef KVM_CAP_IRQ_ROUTING
 
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index 3b535db..343bd76 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -39,16 +39,6 @@
 					struct mem_cgroup *mem_cont,
 					int active, int file);
 
-struct memcg_scanrecord {
-	struct mem_cgroup *mem; /* scanend memory cgroup */
-	struct mem_cgroup *root; /* scan target hierarchy root */
-	int context;		/* scanning context (see memcontrol.c) */
-	unsigned long nr_scanned[2]; /* the number of scanned pages */
-	unsigned long nr_rotated[2]; /* the number of rotated pages */
-	unsigned long nr_freed[2]; /* the number of freed pages */
-	unsigned long elapsed; /* nsec of time elapsed while scanning */
-};
-
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
 /*
  * All "charge" functions with gfp_mask should use GFP_KERNEL or
@@ -127,15 +117,6 @@
 extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg,
 					struct task_struct *p);
 
-extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
-						  gfp_t gfp_mask, bool noswap,
-						  struct memcg_scanrecord *rec);
-extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
-						gfp_t gfp_mask, bool noswap,
-						struct zone *zone,
-						struct memcg_scanrecord *rec,
-						unsigned long *nr_scanned);
-
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
 extern int do_swap_account;
 #endif
diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h
index d12f8d6..97cf4f2 100644
--- a/include/linux/mfd/wm8994/pdata.h
+++ b/include/linux/mfd/wm8994/pdata.h
@@ -26,7 +26,7 @@
 	struct regulator_init_data *init_data;
 };
 
-#define WM8994_CONFIGURE_GPIO 0x8000
+#define WM8994_CONFIGURE_GPIO 0x10000
 
 #define WM8994_DRC_REGS 5
 #define WM8994_EQ_REGS  20
diff --git a/include/linux/namei.h b/include/linux/namei.h
index 76fe2c6..409328d 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -48,11 +48,12 @@
  */
 #define LOOKUP_FOLLOW		0x0001
 #define LOOKUP_DIRECTORY	0x0002
+#define LOOKUP_AUTOMOUNT	0x0004
 
 #define LOOKUP_PARENT		0x0010
 #define LOOKUP_REVAL		0x0020
 #define LOOKUP_RCU		0x0040
-#define LOOKUP_NO_AUTOMOUNT	0x0080
+
 /*
  * Intent data
  */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 8c230cb..9fc0122 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -621,8 +621,9 @@
 extern void pcie_bus_configure_settings(struct pci_bus *bus, u8 smpss);
 
 enum pcie_bus_config_types {
-	PCIE_BUS_PERFORMANCE,
+	PCIE_BUS_TUNE_OFF,
 	PCIE_BUS_SAFE,
+	PCIE_BUS_PERFORMANCE,
 	PCIE_BUS_PEER2PEER,
 };
 
diff --git a/include/linux/ptp_classify.h b/include/linux/ptp_classify.h
index e07e274..1dc420b 100644
--- a/include/linux/ptp_classify.h
+++ b/include/linux/ptp_classify.h
@@ -51,6 +51,7 @@
 #define PTP_CLASS_V2_VLAN (PTP_CLASS_V2 | PTP_CLASS_VLAN)
 
 #define PTP_EV_PORT 319
+#define PTP_GEN_BIT 0x08 /* indicates general message, if set in message type */
 
 #define OFF_ETYPE	12
 #define OFF_IHL		14
@@ -116,14 +117,20 @@
 	{OP_OR,		0,   0, PTP_CLASS_IPV6		}, /*              */ \
 	{OP_RETA,	0,   0, 0			}, /*              */ \
 /*L3x*/	{OP_RETK,	0,   0, PTP_CLASS_NONE		}, /*              */ \
-/*L40*/	{OP_JEQ,	0,   6, ETH_P_8021Q		}, /* f goto L50   */ \
+/*L40*/	{OP_JEQ,	0,   9, ETH_P_8021Q		}, /* f goto L50   */ \
 	{OP_LDH,	0,   0, OFF_ETYPE + 4		}, /*              */ \
-	{OP_JEQ,	0,   9, ETH_P_1588		}, /* f goto L60   */ \
+	{OP_JEQ,	0,  15, ETH_P_1588		}, /* f goto L60   */ \
+	{OP_LDB,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
+	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
+	{OP_JEQ,	0,  12, 0			}, /* f goto L6x   */ \
 	{OP_LDH,	0,   0, ETH_HLEN + VLAN_HLEN	}, /*              */ \
 	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
 	{OP_OR,		0,   0, PTP_CLASS_VLAN		}, /*              */ \
 	{OP_RETA,	0,   0, 0			}, /*              */ \
-/*L50*/	{OP_JEQ,	0,   4, ETH_P_1588		}, /* f goto L61   */ \
+/*L50*/	{OP_JEQ,	0,   7, ETH_P_1588		}, /* f goto L61   */ \
+	{OP_LDB,	0,   0, ETH_HLEN		}, /*              */ \
+	{OP_AND,	0,   0, PTP_GEN_BIT		}, /*              */ \
+	{OP_JEQ,	0,   4, 0			}, /* f goto L6x   */ \
 	{OP_LDH,	0,   0, ETH_HLEN		}, /*              */ \
 	{OP_AND,	0,   0, PTP_CLASS_VMASK		}, /*              */ \
 	{OP_OR,		0,   0, PTP_CLASS_L2		}, /*              */ \
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4ac2c05..41d0237 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -1956,7 +1956,6 @@
 
 extern unsigned long long
 task_sched_runtime(struct task_struct *task);
-extern unsigned long long thread_group_sched_runtime(struct task_struct *task);
 
 /* sched_exec is called by processes performing an exec */
 #ifdef CONFIG_SMP
diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 7b996ed..8bd383c 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -524,6 +524,7 @@
 extern bool skb_recycle_check(struct sk_buff *skb, int skb_size);
 
 extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src);
+extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask);
 extern struct sk_buff *skb_clone(struct sk_buff *skb,
 				 gfp_t priority);
 extern struct sk_buff *skb_copy(const struct sk_buff *skb,
diff --git a/include/linux/snmp.h b/include/linux/snmp.h
index 12b2b18..e16557a 100644
--- a/include/linux/snmp.h
+++ b/include/linux/snmp.h
@@ -231,6 +231,8 @@
 	LINUX_MIB_TCPDEFERACCEPTDROP,
 	LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
 	LINUX_MIB_TCPTIMEWAITOVERFLOW,		/* TCPTimeWaitOverflow */
+	LINUX_MIB_TCPREQQFULLDOCOOKIES,		/* TCPReqQFullDoCookies */
+	LINUX_MIB_TCPREQQFULLDROP,		/* TCPReqQFullDrop */
 	__LINUX_MIB_MAX
 };
 
diff --git a/include/linux/swap.h b/include/linux/swap.h
index 14d6249..c71f84b 100644
--- a/include/linux/swap.h
+++ b/include/linux/swap.h
@@ -252,6 +252,12 @@
 extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order,
 					gfp_t gfp_mask, nodemask_t *mask);
 extern int __isolate_lru_page(struct page *page, int mode, int file);
+extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem,
+						  gfp_t gfp_mask, bool noswap);
+extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
+						gfp_t gfp_mask, bool noswap,
+						struct zone *zone,
+						unsigned long *nr_scanned);
 extern unsigned long shrink_all_memory(unsigned long nr_pages);
 extern int vm_swappiness;
 extern int remove_mapping(struct address_space *mapping, struct page *page);
diff --git a/include/net/flow.h b/include/net/flow.h
index 78113da..a094477 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -7,6 +7,7 @@
 #ifndef _NET_FLOW_H
 #define _NET_FLOW_H
 
+#include <linux/socket.h>
 #include <linux/in6.h>
 #include <linux/atomic.h>
 
@@ -68,7 +69,7 @@
 #define fl4_ipsec_spi		uli.spi
 #define fl4_mh_type		uli.mht.type
 #define fl4_gre_key		uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
 
 static inline void flowi4_init_output(struct flowi4 *fl4, int oif,
 				      __u32 mark, __u8 tos, __u8 scope,
@@ -112,7 +113,7 @@
 #define fl6_ipsec_spi		uli.spi
 #define fl6_mh_type		uli.mht.type
 #define fl6_gre_key		uli.gre_key
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
 
 struct flowidn {
 	struct flowi_common	__fl_common;
@@ -127,7 +128,7 @@
 	union flowi_uli		uli;
 #define fld_sport		uli.ports.sport
 #define fld_dport		uli.ports.dport
-};
+} __attribute__((__aligned__(BITS_PER_LONG/8)));
 
 struct flowi {
 	union {
@@ -161,6 +162,24 @@
 	return container_of(fldn, struct flowi, u.dn);
 }
 
+typedef unsigned long flow_compare_t;
+
+static inline size_t flow_key_size(u16 family)
+{
+	switch (family) {
+	case AF_INET:
+		BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t));
+		return sizeof(struct flowi4) / sizeof(flow_compare_t);
+	case AF_INET6:
+		BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t));
+		return sizeof(struct flowi6) / sizeof(flow_compare_t);
+	case AF_DECnet:
+		BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t));
+		return sizeof(struct flowidn) / sizeof(flow_compare_t);
+	}
+	return 0;
+}
+
 #define FLOW_DIR_IN	0
 #define FLOW_DIR_OUT	1
 #define FLOW_DIR_FWD	2
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index 99e6e19..4c0766e 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -96,7 +96,8 @@
  */
 struct listen_sock {
 	u8			max_qlen_log;
-	/* 3 bytes hole, try to use */
+	u8			synflood_warned;
+	/* 2 bytes hole, try to use */
 	int			qlen;
 	int			qlen_young;
 	int			clock_hand;
diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h
index 6506458..712b3be 100644
--- a/include/net/sctp/command.h
+++ b/include/net/sctp/command.h
@@ -109,6 +109,7 @@
 	SCTP_CMD_SEND_MSG,	 /* Send the whole use message */
 	SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */
 	SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/
+	SCTP_CMD_SET_ASOC,	 /* Restore association context */
 	SCTP_CMD_LAST
 } sctp_verb_t;
 
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 149a415..acc620a 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -431,17 +431,34 @@
 extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
 extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, 
 				    struct ip_options *opt);
+#ifdef CONFIG_SYN_COOKIES
 extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, 
 				     __u16 *mss);
+#else
+static inline __u32 cookie_v4_init_sequence(struct sock *sk,
+					    struct sk_buff *skb,
+					    __u16 *mss)
+{
+	return 0;
+}
+#endif
 
 extern __u32 cookie_init_timestamp(struct request_sock *req);
 extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *);
 
 /* From net/ipv6/syncookies.c */
 extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb);
+#ifdef CONFIG_SYN_COOKIES
 extern __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb,
 				     __u16 *mss);
-
+#else
+static inline __u32 cookie_v6_init_sequence(struct sock *sk,
+					    struct sk_buff *skb,
+					    __u16 *mss)
+{
+	return 0;
+}
+#endif
 /* tcp_output.c */
 
 extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss,
@@ -460,6 +477,9 @@
 extern void tcp_send_fin(struct sock *sk);
 extern void tcp_send_active_reset(struct sock *sk, gfp_t priority);
 extern int tcp_send_synack(struct sock *);
+extern int tcp_syn_flood_action(struct sock *sk,
+				const struct sk_buff *skb,
+				const char *proto);
 extern void tcp_push_one(struct sock *, unsigned int mss_now);
 extern void tcp_send_ack(struct sock *sk);
 extern void tcp_send_delayed_ack(struct sock *sk);
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 5271a74..498433d 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -39,6 +39,7 @@
 						  struct sk_buff *skb);
 
 extern int			datagram_send_ctl(struct net *net,
+						  struct sock *sk,
 						  struct msghdr *msg,
 						  struct flowi6 *fl6,
 						  struct ipv6_txoptions *opt,
diff --git a/include/trace/events/writeback.h b/include/trace/events/writeback.h
index 6bca4cc..5f17270 100644
--- a/include/trace/events/writeback.h
+++ b/include/trace/events/writeback.h
@@ -298,7 +298,7 @@
 		__array(char, name, 32)
 		__field(unsigned long, ino)
 		__field(unsigned long, state)
-		__field(unsigned long, age)
+		__field(unsigned long, dirtied_when)
 		__field(unsigned long, writeback_index)
 		__field(long, nr_to_write)
 		__field(unsigned long, wrote)
@@ -309,19 +309,19 @@
 			dev_name(inode->i_mapping->backing_dev_info->dev), 32);
 		__entry->ino		= inode->i_ino;
 		__entry->state		= inode->i_state;
-		__entry->age		= (jiffies - inode->dirtied_when) *
-								1000 / HZ;
+		__entry->dirtied_when	= inode->dirtied_when;
 		__entry->writeback_index = inode->i_mapping->writeback_index;
 		__entry->nr_to_write	= nr_to_write;
 		__entry->wrote		= nr_to_write - wbc->nr_to_write;
 	),
 
-	TP_printk("bdi %s: ino=%lu state=%s age=%lu "
+	TP_printk("bdi %s: ino=%lu state=%s dirtied_when=%lu age=%lu "
 		  "index=%lu to_write=%ld wrote=%lu",
 		  __entry->name,
 		  __entry->ino,
 		  show_inode_state(__entry->state),
-		  __entry->age,
+		  __entry->dirtied_when,
+		  (jiffies - __entry->dirtied_when) / HZ,
 		  __entry->writeback_index,
 		  __entry->nr_to_write,
 		  __entry->wrote
diff --git a/init/main.c b/init/main.c
index 9c51ee7..03b408d 100644
--- a/init/main.c
+++ b/init/main.c
@@ -209,8 +209,19 @@
 
 static int __init loglevel(char *str)
 {
-	get_option(&str, &console_loglevel);
-	return 0;
+	int newlevel;
+
+	/*
+	 * Only update loglevel value when a correct setting was passed,
+	 * to prevent blind crashes (when loglevel being set to 0) that
+	 * are quite hard to debug
+	 */
+	if (get_option(&str, &newlevel)) {
+		console_loglevel = newlevel;
+		return 0;
+	}
+
+	return -EINVAL;
 }
 
 early_param("loglevel", loglevel);
@@ -370,9 +381,6 @@
 	preempt_enable_no_resched();
 	schedule();
 
-	/* At this point, we can enable user mode helper functionality */
-	usermodehelper_enable();
-
 	/* Call into cpu_idle with preempt disabled */
 	preempt_disable();
 	cpu_idle();
@@ -722,6 +730,7 @@
 	driver_init();
 	init_irq_proc();
 	do_ctors();
+	usermodehelper_enable();
 	do_initcalls();
 }
 
diff --git a/kernel/irq/irqdomain.c b/kernel/irq/irqdomain.c
index d5828da..b57a377 100644
--- a/kernel/irq/irqdomain.c
+++ b/kernel/irq/irqdomain.c
@@ -29,7 +29,11 @@
 	 */
 	for (hwirq = 0; hwirq < domain->nr_irq; hwirq++) {
 		d = irq_get_irq_data(irq_domain_to_irq(domain, hwirq));
-		if (d || d->domain) {
+		if (!d) {
+			WARN(1, "error: assigning domain to non existant irq_desc");
+			return;
+		}
+		if (d->domain) {
 			/* things are broken; just report, don't clean up */
 			WARN(1, "error: irq_desc already assigned to a domain");
 			return;
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index 58f405b..c8008dd 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -250,7 +250,7 @@
 	do {
 		times->utime = cputime_add(times->utime, t->utime);
 		times->stime = cputime_add(times->stime, t->stime);
-		times->sum_exec_runtime += t->se.sum_exec_runtime;
+		times->sum_exec_runtime += task_sched_runtime(t);
 	} while_each_thread(tsk, t);
 out:
 	rcu_read_unlock();
@@ -312,7 +312,8 @@
 		cpu->cpu = cputime.utime;
 		break;
 	case CPUCLOCK_SCHED:
-		cpu->sched = thread_group_sched_runtime(p);
+		thread_group_cputime(p, &cputime);
+		cpu->sched = cputime.sum_exec_runtime;
 		break;
 	}
 	return 0;
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 9de3ecf..a70d2a5 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -744,20 +744,17 @@
 			break;
 
 		si = child->last_siginfo;
-		if (unlikely(!si || si->si_code >> 8 != PTRACE_EVENT_STOP))
-			break;
-
-		child->jobctl |= JOBCTL_LISTENING;
-
-		/*
-		 * If NOTIFY is set, it means event happened between start
-		 * of this trap and now.  Trigger re-trap immediately.
-		 */
-		if (child->jobctl & JOBCTL_TRAP_NOTIFY)
-			signal_wake_up(child, true);
-
+		if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) {
+			child->jobctl |= JOBCTL_LISTENING;
+			/*
+			 * If NOTIFY is set, it means event happened between
+			 * start of this trap and now.  Trigger re-trap.
+			 */
+			if (child->jobctl & JOBCTL_TRAP_NOTIFY)
+				signal_wake_up(child, true);
+			ret = 0;
+		}
 		unlock_task_sighand(child, &flags);
-		ret = 0;
 		break;
 
 	case PTRACE_DETACH:	 /* detach a process that was attached. */
diff --git a/kernel/resource.c b/kernel/resource.c
index 3b3cedc..c8dc249 100644
--- a/kernel/resource.c
+++ b/kernel/resource.c
@@ -419,6 +419,9 @@
 		else
 			tmp.end = root->end;
 
+		if (tmp.end < tmp.start)
+			goto next;
+
 		resource_clip(&tmp, constraint->min, constraint->max);
 		arch_remove_reservations(&tmp);
 
@@ -436,8 +439,10 @@
 				return 0;
 			}
 		}
-		if (!this)
+
+next:		if (!this || this->end == root->end)
 			break;
+
 		if (this != old)
 			tmp.start = this->end + 1;
 		this = this->sibling;
diff --git a/kernel/sched.c b/kernel/sched.c
index ec5f472..b50b0f0 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -3725,30 +3725,6 @@
 }
 
 /*
- * Return sum_exec_runtime for the thread group.
- * In case the task is currently running, return the sum plus current's
- * pending runtime that have not been accounted yet.
- *
- * Note that the thread group might have other running tasks as well,
- * so the return value not includes other pending runtime that other
- * running tasks might have.
- */
-unsigned long long thread_group_sched_runtime(struct task_struct *p)
-{
-	struct task_cputime totals;
-	unsigned long flags;
-	struct rq *rq;
-	u64 ns;
-
-	rq = task_rq_lock(p, &flags);
-	thread_group_cputime(p, &totals);
-	ns = totals.sum_exec_runtime + do_task_delta_exec(p, rq);
-	task_rq_unlock(rq, p, &flags);
-
-	return ns;
-}
-
-/*
  * Account user cpu time to a process.
  * @p: the process that the cpu time gets accounted to
  * @cputime: the cpu time spent in user space since the last update
@@ -4372,7 +4348,7 @@
 		blk_schedule_flush_plug(tsk);
 }
 
-asmlinkage void schedule(void)
+asmlinkage void __sched schedule(void)
 {
 	struct task_struct *tsk = current;
 
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 97540f0..af11778 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -1050,7 +1050,7 @@
 	 */
 	if (curr && unlikely(rt_task(curr)) &&
 	    (curr->rt.nr_cpus_allowed < 2 ||
-	     curr->prio < p->prio) &&
+	     curr->prio <= p->prio) &&
 	    (p->rt.nr_cpus_allowed > 1)) {
 		int target = find_lowest_rq(p);
 
@@ -1581,7 +1581,7 @@
 	    p->rt.nr_cpus_allowed > 1 &&
 	    rt_task(rq->curr) &&
 	    (rq->curr->rt.nr_cpus_allowed < 2 ||
-	     rq->curr->prio < p->prio))
+	     rq->curr->prio <= p->prio))
 		push_rt_tasks(rq);
 }
 
diff --git a/kernel/taskstats.c b/kernel/taskstats.c
index e19ce14..e660464 100644
--- a/kernel/taskstats.c
+++ b/kernel/taskstats.c
@@ -655,6 +655,7 @@
 	.cmd		= TASKSTATS_CMD_GET,
 	.doit		= taskstats_user_cmd,
 	.policy		= taskstats_cmd_get_policy,
+	.flags		= GENL_ADMIN_PERM,
 };
 
 static struct genl_ops cgroupstats_ops = {
diff --git a/kernel/tsacct.c b/kernel/tsacct.c
index 24dc60d..5bbfac8 100644
--- a/kernel/tsacct.c
+++ b/kernel/tsacct.c
@@ -78,6 +78,7 @@
 
 #define KB 1024
 #define MB (1024*KB)
+#define KB_MASK (~(KB-1))
 /*
  * fill in extended accounting fields
  */
@@ -95,14 +96,14 @@
 		stats->hiwater_vm    = get_mm_hiwater_vm(mm)  * PAGE_SIZE / KB;
 		mmput(mm);
 	}
-	stats->read_char	= p->ioac.rchar;
-	stats->write_char	= p->ioac.wchar;
-	stats->read_syscalls	= p->ioac.syscr;
-	stats->write_syscalls	= p->ioac.syscw;
+	stats->read_char	= p->ioac.rchar & KB_MASK;
+	stats->write_char	= p->ioac.wchar & KB_MASK;
+	stats->read_syscalls	= p->ioac.syscr & KB_MASK;
+	stats->write_syscalls	= p->ioac.syscw & KB_MASK;
 #ifdef CONFIG_TASK_IO_ACCOUNTING
-	stats->read_bytes	= p->ioac.read_bytes;
-	stats->write_bytes	= p->ioac.write_bytes;
-	stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes;
+	stats->read_bytes	= p->ioac.read_bytes & KB_MASK;
+	stats->write_bytes	= p->ioac.write_bytes & KB_MASK;
+	stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes & KB_MASK;
 #else
 	stats->read_bytes	= 0;
 	stats->write_bytes	= 0;
diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 25fb1b0..1783aab 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -2412,8 +2412,13 @@
 
 	for_each_cwq_cpu(cpu, wq) {
 		struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq);
+		bool drained;
 
-		if (!cwq->nr_active && list_empty(&cwq->delayed_works))
+		spin_lock_irq(&cwq->gcwq->lock);
+		drained = !cwq->nr_active && list_empty(&cwq->delayed_works);
+		spin_unlock_irq(&cwq->gcwq->lock);
+
+		if (drained)
 			continue;
 
 		if (++flush_cnt == 10 ||
diff --git a/lib/sha1.c b/lib/sha1.c
index f33271d..1de509a 100644
--- a/lib/sha1.c
+++ b/lib/sha1.c
@@ -8,6 +8,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/bitops.h>
+#include <linux/cryptohash.h>
 #include <asm/unaligned.h>
 
 /*
diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c
index e51e255..a768e6d 100644
--- a/lib/xz/xz_dec_bcj.c
+++ b/lib/xz/xz_dec_bcj.c
@@ -441,8 +441,12 @@
 	 * next filter in the chain. Apply the BCJ filter on the new data
 	 * in the output buffer. If everything cannot be filtered, copy it
 	 * to temp and rewind the output buffer position accordingly.
+	 *
+	 * This needs to be always run when temp.size == 0 to handle a special
+	 * case where the output buffer is full and the next filter has no
+	 * more output coming but hasn't returned XZ_STREAM_END yet.
 	 */
-	if (s->temp.size < b->out_size - b->out_pos) {
+	if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) {
 		out_start = b->out_pos;
 		memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size);
 		b->out_pos += s->temp.size;
@@ -465,16 +469,25 @@
 		s->temp.size = b->out_pos - out_start;
 		b->out_pos -= s->temp.size;
 		memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size);
+
+		/*
+		 * If there wasn't enough input to the next filter to fill
+		 * the output buffer with unfiltered data, there's no point
+		 * to try decoding more data to temp.
+		 */
+		if (b->out_pos + s->temp.size < b->out_size)
+			return XZ_OK;
 	}
 
 	/*
-	 * If we have unfiltered data in temp, try to fill by decoding more
-	 * data from the next filter. Apply the BCJ filter on temp. Then we
-	 * hopefully can fill the actual output buffer by copying filtered
-	 * data from temp. A mix of filtered and unfiltered data may be left
-	 * in temp; it will be taken care on the next call to this function.
+	 * We have unfiltered data in temp. If the output buffer isn't full
+	 * yet, try to fill the temp buffer by decoding more data from the
+	 * next filter. Apply the BCJ filter on temp. Then we hopefully can
+	 * fill the actual output buffer by copying filtered data from temp.
+	 * A mix of filtered and unfiltered data may be left in temp; it will
+	 * be taken care on the next call to this function.
 	 */
-	if (s->temp.size > 0) {
+	if (b->out_pos < b->out_size) {
 		/* Make b->out{,_pos,_size} temporarily point to s->temp. */
 		s->out = b->out;
 		s->out_pos = b->out_pos;
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index d6edf8d..a87da52 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -359,6 +359,17 @@
 	return max(5UL * 60 * HZ, interval);
 }
 
+/*
+ * Clear pending bit and wakeup anybody waiting for flusher thread creation or
+ * shutdown
+ */
+static void bdi_clear_pending(struct backing_dev_info *bdi)
+{
+	clear_bit(BDI_pending, &bdi->state);
+	smp_mb__after_clear_bit();
+	wake_up_bit(&bdi->state, BDI_pending);
+}
+
 static int bdi_forker_thread(void *ptr)
 {
 	struct bdi_writeback *me = ptr;
@@ -390,6 +401,13 @@
 		}
 
 		spin_lock_bh(&bdi_lock);
+		/*
+		 * In the following loop we are going to check whether we have
+		 * some work to do without any synchronization with tasks
+		 * waking us up to do work for them. So we have to set task
+		 * state already here so that we don't miss wakeups coming
+		 * after we verify some condition.
+		 */
 		set_current_state(TASK_INTERRUPTIBLE);
 
 		list_for_each_entry(bdi, &bdi_list, bdi_list) {
@@ -469,11 +487,13 @@
 				spin_unlock_bh(&bdi->wb_lock);
 				wake_up_process(task);
 			}
+			bdi_clear_pending(bdi);
 			break;
 
 		case KILL_THREAD:
 			__set_current_state(TASK_RUNNING);
 			kthread_stop(task);
+			bdi_clear_pending(bdi);
 			break;
 
 		case NO_ACTION:
@@ -489,16 +509,8 @@
 			else
 				schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10));
 			try_to_freeze();
-			/* Back to the main loop */
-			continue;
+			break;
 		}
-
-		/*
-		 * Clear pending bit and wakeup anybody waiting to tear us down.
-		 */
-		clear_bit(BDI_pending, &bdi->state);
-		smp_mb__after_clear_bit();
-		wake_up_bit(&bdi->state, BDI_pending);
 	}
 
 	return 0;
diff --git a/mm/filemap.c b/mm/filemap.c
index 645a080..7771871 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -827,13 +827,14 @@
 {
 	unsigned int i;
 	unsigned int ret;
-	unsigned int nr_found;
+	unsigned int nr_found, nr_skip;
 
 	rcu_read_lock();
 restart:
 	nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree,
 				(void ***)pages, NULL, start, nr_pages);
 	ret = 0;
+	nr_skip = 0;
 	for (i = 0; i < nr_found; i++) {
 		struct page *page;
 repeat:
@@ -856,6 +857,7 @@
 			 * here as an exceptional entry: so skip over it -
 			 * we only reach this from invalidate_mapping_pages().
 			 */
+			nr_skip++;
 			continue;
 		}
 
@@ -876,7 +878,7 @@
 	 * If all entries were removed before we could secure them,
 	 * try again, because callers stop trying once 0 is returned.
 	 */
-	if (unlikely(!ret && nr_found))
+	if (unlikely(!ret && nr_found > nr_skip))
 		goto restart;
 	rcu_read_unlock();
 	return ret;
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index ebd1e86..3508777 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -204,50 +204,6 @@
 static void mem_cgroup_threshold(struct mem_cgroup *mem);
 static void mem_cgroup_oom_notify(struct mem_cgroup *mem);
 
-enum {
-	SCAN_BY_LIMIT,
-	SCAN_BY_SYSTEM,
-	NR_SCAN_CONTEXT,
-	SCAN_BY_SHRINK,	/* not recorded now */
-};
-
-enum {
-	SCAN,
-	SCAN_ANON,
-	SCAN_FILE,
-	ROTATE,
-	ROTATE_ANON,
-	ROTATE_FILE,
-	FREED,
-	FREED_ANON,
-	FREED_FILE,
-	ELAPSED,
-	NR_SCANSTATS,
-};
-
-struct scanstat {
-	spinlock_t	lock;
-	unsigned long	stats[NR_SCAN_CONTEXT][NR_SCANSTATS];
-	unsigned long	rootstats[NR_SCAN_CONTEXT][NR_SCANSTATS];
-};
-
-const char *scanstat_string[NR_SCANSTATS] = {
-	"scanned_pages",
-	"scanned_anon_pages",
-	"scanned_file_pages",
-	"rotated_pages",
-	"rotated_anon_pages",
-	"rotated_file_pages",
-	"freed_pages",
-	"freed_anon_pages",
-	"freed_file_pages",
-	"elapsed_ns",
-};
-#define SCANSTAT_WORD_LIMIT	"_by_limit"
-#define SCANSTAT_WORD_SYSTEM	"_by_system"
-#define SCANSTAT_WORD_HIERARCHY	"_under_hierarchy"
-
-
 /*
  * The memory controller data structure. The memory controller controls both
  * page cache and RSS per cgroup. We would eventually like to provide
@@ -313,8 +269,7 @@
 
 	/* For oom notifier event fd */
 	struct list_head oom_notify;
-	/* For recording LRU-scan statistics */
-	struct scanstat scanstat;
+
 	/*
 	 * Should we move charges of a task when a task is moved into this
 	 * mem_cgroup ? And what type of charges should we move ?
@@ -1678,44 +1633,6 @@
 }
 #endif
 
-static void __mem_cgroup_record_scanstat(unsigned long *stats,
-			   struct memcg_scanrecord *rec)
-{
-
-	stats[SCAN] += rec->nr_scanned[0] + rec->nr_scanned[1];
-	stats[SCAN_ANON] += rec->nr_scanned[0];
-	stats[SCAN_FILE] += rec->nr_scanned[1];
-
-	stats[ROTATE] += rec->nr_rotated[0] + rec->nr_rotated[1];
-	stats[ROTATE_ANON] += rec->nr_rotated[0];
-	stats[ROTATE_FILE] += rec->nr_rotated[1];
-
-	stats[FREED] += rec->nr_freed[0] + rec->nr_freed[1];
-	stats[FREED_ANON] += rec->nr_freed[0];
-	stats[FREED_FILE] += rec->nr_freed[1];
-
-	stats[ELAPSED] += rec->elapsed;
-}
-
-static void mem_cgroup_record_scanstat(struct memcg_scanrecord *rec)
-{
-	struct mem_cgroup *mem;
-	int context = rec->context;
-
-	if (context >= NR_SCAN_CONTEXT)
-		return;
-
-	mem = rec->mem;
-	spin_lock(&mem->scanstat.lock);
-	__mem_cgroup_record_scanstat(mem->scanstat.stats[context], rec);
-	spin_unlock(&mem->scanstat.lock);
-
-	mem = rec->root;
-	spin_lock(&mem->scanstat.lock);
-	__mem_cgroup_record_scanstat(mem->scanstat.rootstats[context], rec);
-	spin_unlock(&mem->scanstat.lock);
-}
-
 /*
  * Scan the hierarchy if needed to reclaim memory. We remember the last child
  * we reclaimed from, so that we don't end up penalizing one child extensively
@@ -1740,9 +1657,8 @@
 	bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP;
 	bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK;
 	bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT;
-	struct memcg_scanrecord rec;
 	unsigned long excess;
-	unsigned long scanned;
+	unsigned long nr_scanned;
 
 	excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT;
 
@@ -1750,15 +1666,6 @@
 	if (!check_soft && !shrink && root_mem->memsw_is_minimum)
 		noswap = true;
 
-	if (shrink)
-		rec.context = SCAN_BY_SHRINK;
-	else if (check_soft)
-		rec.context = SCAN_BY_SYSTEM;
-	else
-		rec.context = SCAN_BY_LIMIT;
-
-	rec.root = root_mem;
-
 	while (1) {
 		victim = mem_cgroup_select_victim(root_mem);
 		if (victim == root_mem) {
@@ -1799,23 +1706,14 @@
 			css_put(&victim->css);
 			continue;
 		}
-		rec.mem = victim;
-		rec.nr_scanned[0] = 0;
-		rec.nr_scanned[1] = 0;
-		rec.nr_rotated[0] = 0;
-		rec.nr_rotated[1] = 0;
-		rec.nr_freed[0] = 0;
-		rec.nr_freed[1] = 0;
-		rec.elapsed = 0;
 		/* we use swappiness of local cgroup */
 		if (check_soft) {
 			ret = mem_cgroup_shrink_node_zone(victim, gfp_mask,
-				noswap, zone, &rec, &scanned);
-			*total_scanned += scanned;
+				noswap, zone, &nr_scanned);
+			*total_scanned += nr_scanned;
 		} else
 			ret = try_to_free_mem_cgroup_pages(victim, gfp_mask,
-						noswap, &rec);
-		mem_cgroup_record_scanstat(&rec);
+						noswap);
 		css_put(&victim->css);
 		/*
 		 * At shrinking usage, we can't check we should stop here or
@@ -3854,18 +3752,14 @@
 	/* try to free all pages in this cgroup */
 	shrink = 1;
 	while (nr_retries && mem->res.usage > 0) {
-		struct memcg_scanrecord rec;
 		int progress;
 
 		if (signal_pending(current)) {
 			ret = -EINTR;
 			goto out;
 		}
-		rec.context = SCAN_BY_SHRINK;
-		rec.mem = mem;
-		rec.root = mem;
 		progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL,
-						false, &rec);
+						false);
 		if (!progress) {
 			nr_retries--;
 			/* maybe some writeback is necessary */
@@ -4709,54 +4603,6 @@
 }
 #endif /* CONFIG_NUMA */
 
-static int mem_cgroup_vmscan_stat_read(struct cgroup *cgrp,
-				struct cftype *cft,
-				struct cgroup_map_cb *cb)
-{
-	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
-	char string[64];
-	int i;
-
-	for (i = 0; i < NR_SCANSTATS; i++) {
-		strcpy(string, scanstat_string[i]);
-		strcat(string, SCANSTAT_WORD_LIMIT);
-		cb->fill(cb, string,  mem->scanstat.stats[SCAN_BY_LIMIT][i]);
-	}
-
-	for (i = 0; i < NR_SCANSTATS; i++) {
-		strcpy(string, scanstat_string[i]);
-		strcat(string, SCANSTAT_WORD_SYSTEM);
-		cb->fill(cb, string,  mem->scanstat.stats[SCAN_BY_SYSTEM][i]);
-	}
-
-	for (i = 0; i < NR_SCANSTATS; i++) {
-		strcpy(string, scanstat_string[i]);
-		strcat(string, SCANSTAT_WORD_LIMIT);
-		strcat(string, SCANSTAT_WORD_HIERARCHY);
-		cb->fill(cb, string,  mem->scanstat.rootstats[SCAN_BY_LIMIT][i]);
-	}
-	for (i = 0; i < NR_SCANSTATS; i++) {
-		strcpy(string, scanstat_string[i]);
-		strcat(string, SCANSTAT_WORD_SYSTEM);
-		strcat(string, SCANSTAT_WORD_HIERARCHY);
-		cb->fill(cb, string,  mem->scanstat.rootstats[SCAN_BY_SYSTEM][i]);
-	}
-	return 0;
-}
-
-static int mem_cgroup_reset_vmscan_stat(struct cgroup *cgrp,
-				unsigned int event)
-{
-	struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp);
-
-	spin_lock(&mem->scanstat.lock);
-	memset(&mem->scanstat.stats, 0, sizeof(mem->scanstat.stats));
-	memset(&mem->scanstat.rootstats, 0, sizeof(mem->scanstat.rootstats));
-	spin_unlock(&mem->scanstat.lock);
-	return 0;
-}
-
-
 static struct cftype mem_cgroup_files[] = {
 	{
 		.name = "usage_in_bytes",
@@ -4827,11 +4673,6 @@
 		.mode = S_IRUGO,
 	},
 #endif
-	{
-		.name = "vmscan_stat",
-		.read_map = mem_cgroup_vmscan_stat_read,
-		.trigger = mem_cgroup_reset_vmscan_stat,
-	},
 };
 
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
@@ -5095,7 +4936,6 @@
 	atomic_set(&mem->refcnt, 1);
 	mem->move_charge_at_immigrate = 0;
 	mutex_init(&mem->thresholds_lock);
-	spin_lock_init(&mem->scanstat.lock);
 	return &mem->css;
 free_out:
 	__mem_cgroup_free(mem);
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 8b57173..9c51f9f 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -636,7 +636,6 @@
 	struct vm_area_struct *prev;
 	struct vm_area_struct *vma;
 	int err = 0;
-	pgoff_t pgoff;
 	unsigned long vmstart;
 	unsigned long vmend;
 
@@ -649,9 +648,9 @@
 		vmstart = max(start, vma->vm_start);
 		vmend   = min(end, vma->vm_end);
 
-		pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT);
 		prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags,
-				  vma->anon_vma, vma->vm_file, pgoff, new_pol);
+				  vma->anon_vma, vma->vm_file, vma->vm_pgoff,
+				  new_pol);
 		if (prev) {
 			vma = prev;
 			next = vma->vm_next;
@@ -1412,7 +1411,9 @@
 	err = sys_get_mempolicy(policy, nm, nr_bits+1, addr, flags);
 
 	if (!err && nmask) {
-		err = copy_from_user(bm, nm, alloc_size);
+		unsigned long copy_size;
+		copy_size = min_t(unsigned long, sizeof(bm), alloc_size);
+		err = copy_from_user(bm, nm, copy_size);
 		/* ensure entire bitmap is zeroed */
 		err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8);
 		err |= compat_put_bitmap(nmask, bm, nr_bits);
diff --git a/mm/slub.c b/mm/slub.c
index 9f662d7..7c54fe8 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2377,7 +2377,7 @@
 		 */
 		if (unlikely(!prior)) {
 			remove_full(s, page);
-			add_partial(n, page, 0);
+			add_partial(n, page, 1);
 			stat(s, FREE_ADD_PARTIAL);
 		}
 	}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 7ef0903..5016f19 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -2140,6 +2140,14 @@
 		return NULL;
 	}
 
+	/*
+	 * If the allocated address space is passed to a hypercall
+	 * before being used then we cannot rely on a page fault to
+	 * trigger an update of the page tables.  So sync all the page
+	 * tables here.
+	 */
+	vmalloc_sync_all();
+
 	return area;
 }
 EXPORT_SYMBOL_GPL(alloc_vm_area);
diff --git a/mm/vmscan.c b/mm/vmscan.c
index b7719ec..b55699c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -105,7 +105,6 @@
 
 	/* Which cgroup do we reclaim from */
 	struct mem_cgroup *mem_cgroup;
-	struct memcg_scanrecord *memcg_record;
 
 	/*
 	 * Nodemask of nodes allowed by the caller. If NULL, all nodes
@@ -1349,8 +1348,6 @@
 			int file = is_file_lru(lru);
 			int numpages = hpage_nr_pages(page);
 			reclaim_stat->recent_rotated[file] += numpages;
-			if (!scanning_global_lru(sc))
-				sc->memcg_record->nr_rotated[file] += numpages;
 		}
 		if (!pagevec_add(&pvec, page)) {
 			spin_unlock_irq(&zone->lru_lock);
@@ -1394,10 +1391,6 @@
 
 	reclaim_stat->recent_scanned[0] += *nr_anon;
 	reclaim_stat->recent_scanned[1] += *nr_file;
-	if (!scanning_global_lru(sc)) {
-		sc->memcg_record->nr_scanned[0] += *nr_anon;
-		sc->memcg_record->nr_scanned[1] += *nr_file;
-	}
 }
 
 /*
@@ -1511,9 +1504,6 @@
 		nr_reclaimed += shrink_page_list(&page_list, zone, sc);
 	}
 
-	if (!scanning_global_lru(sc))
-		sc->memcg_record->nr_freed[file] += nr_reclaimed;
-
 	local_irq_disable();
 	if (current_is_kswapd())
 		__count_vm_events(KSWAPD_STEAL, nr_reclaimed);
@@ -1613,8 +1603,6 @@
 	}
 
 	reclaim_stat->recent_scanned[file] += nr_taken;
-	if (!scanning_global_lru(sc))
-		sc->memcg_record->nr_scanned[file] += nr_taken;
 
 	__count_zone_vm_events(PGREFILL, zone, pgscanned);
 	if (file)
@@ -1666,8 +1654,6 @@
 	 * get_scan_ratio.
 	 */
 	reclaim_stat->recent_rotated[file] += nr_rotated;
-	if (!scanning_global_lru(sc))
-		sc->memcg_record->nr_rotated[file] += nr_rotated;
 
 	move_active_pages_to_lru(zone, &l_active,
 						LRU_ACTIVE + file * LRU_FILE);
@@ -1808,23 +1794,15 @@
 	u64 fraction[2], denominator;
 	enum lru_list l;
 	int noswap = 0;
-	int force_scan = 0;
+	bool force_scan = false;
 	unsigned long nr_force_scan[2];
 
-
-	anon  = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
-		zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
-	file  = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
-		zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
-
-	if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) {
-		/* kswapd does zone balancing and need to scan this zone */
-		if (scanning_global_lru(sc) && current_is_kswapd())
-			force_scan = 1;
-		/* memcg may have small limit and need to avoid priority drop */
-		if (!scanning_global_lru(sc))
-			force_scan = 1;
-	}
+	/* kswapd does zone balancing and needs to scan this zone */
+	if (scanning_global_lru(sc) && current_is_kswapd())
+		force_scan = true;
+	/* memcg may have small limit and need to avoid priority drop */
+	if (!scanning_global_lru(sc))
+		force_scan = true;
 
 	/* If we have no swap space, do not bother scanning anon pages. */
 	if (!sc->may_swap || (nr_swap_pages <= 0)) {
@@ -1837,6 +1815,11 @@
 		goto out;
 	}
 
+	anon  = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) +
+		zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON);
+	file  = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) +
+		zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE);
+
 	if (scanning_global_lru(sc)) {
 		free  = zone_page_state(zone, NR_FREE_PAGES);
 		/* If we have very few page cache pages,
@@ -2268,10 +2251,9 @@
 #ifdef CONFIG_CGROUP_MEM_RES_CTLR
 
 unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem,
-					gfp_t gfp_mask, bool noswap,
-					struct zone *zone,
-					struct memcg_scanrecord *rec,
-					unsigned long *scanned)
+						gfp_t gfp_mask, bool noswap,
+						struct zone *zone,
+						unsigned long *nr_scanned)
 {
 	struct scan_control sc = {
 		.nr_scanned = 0,
@@ -2281,9 +2263,7 @@
 		.may_swap = !noswap,
 		.order = 0,
 		.mem_cgroup = mem,
-		.memcg_record = rec,
 	};
-	ktime_t start, end;
 
 	sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
 			(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
@@ -2292,7 +2272,6 @@
 						      sc.may_writepage,
 						      sc.gfp_mask);
 
-	start = ktime_get();
 	/*
 	 * NOTE: Although we can get the priority field, using it
 	 * here is not a good idea, since it limits the pages we can scan.
@@ -2301,25 +2280,19 @@
 	 * the priority and make it zero.
 	 */
 	shrink_zone(0, zone, &sc);
-	end = ktime_get();
-
-	if (rec)
-		rec->elapsed += ktime_to_ns(ktime_sub(end, start));
-	*scanned = sc.nr_scanned;
 
 	trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed);
 
+	*nr_scanned = sc.nr_scanned;
 	return sc.nr_reclaimed;
 }
 
 unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont,
 					   gfp_t gfp_mask,
-					   bool noswap,
-					   struct memcg_scanrecord *rec)
+					   bool noswap)
 {
 	struct zonelist *zonelist;
 	unsigned long nr_reclaimed;
-	ktime_t start, end;
 	int nid;
 	struct scan_control sc = {
 		.may_writepage = !laptop_mode,
@@ -2328,7 +2301,6 @@
 		.nr_to_reclaim = SWAP_CLUSTER_MAX,
 		.order = 0,
 		.mem_cgroup = mem_cont,
-		.memcg_record = rec,
 		.nodemask = NULL, /* we don't care the placement */
 		.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
 				(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK),
@@ -2337,7 +2309,6 @@
 		.gfp_mask = sc.gfp_mask,
 	};
 
-	start = ktime_get();
 	/*
 	 * Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't
 	 * take care of from where we get pages. So the node where we start the
@@ -2352,9 +2323,6 @@
 					    sc.gfp_mask);
 
 	nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink);
-	end = ktime_get();
-	if (rec)
-		rec->elapsed += ktime_to_ns(ktime_sub(end, start));
 
 	trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed);
 
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 20c18b7..d52b13d 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -659,7 +659,7 @@
 }
 #endif
 
-#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS)
+#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) || defined(CONFIG_NUMA)
 #ifdef CONFIG_ZONE_DMA
 #define TEXT_FOR_DMA(xx) xx "_dma",
 #else
@@ -788,7 +788,7 @@
 
 #endif /* CONFIG_VM_EVENTS_COUNTERS */
 };
-#endif /* CONFIG_PROC_FS || CONFIG_SYSFS */
+#endif /* CONFIG_PROC_FS || CONFIG_SYSFS || CONFIG_NUMA */
 
 
 #ifdef CONFIG_PROC_FS
diff --git a/net/batman-adv/soft-interface.c b/net/batman-adv/soft-interface.c
index 3e2f91f..05dd351 100644
--- a/net/batman-adv/soft-interface.c
+++ b/net/batman-adv/soft-interface.c
@@ -565,7 +565,7 @@
 	struct orig_node *orig_node = NULL;
 	int data_len = skb->len, ret;
 	short vid = -1;
-	bool do_bcast = false;
+	bool do_bcast;
 
 	if (atomic_read(&bat_priv->mesh_state) != MESH_ACTIVE)
 		goto dropped;
@@ -598,15 +598,15 @@
 	tt_local_add(soft_iface, ethhdr->h_source);
 
 	orig_node = transtable_search(bat_priv, ethhdr->h_dest);
-	if (is_multicast_ether_addr(ethhdr->h_dest) ||
-				(orig_node && orig_node->gw_flags)) {
+	do_bcast = is_multicast_ether_addr(ethhdr->h_dest);
+	if (do_bcast ||	(orig_node && orig_node->gw_flags)) {
 		ret = gw_is_target(bat_priv, skb, orig_node);
 
 		if (ret < 0)
 			goto dropped;
 
-		if (ret == 0)
-			do_bcast = true;
+		if (ret)
+			do_bcast = false;
 	}
 
 	/* ethernet packet should be broadcasted */
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index a40170e..7ef4eb4 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -58,8 +58,8 @@
 	if (status)
 		return;
 
-	if (test_bit(HCI_MGMT, &hdev->flags) &&
-				test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+	if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+			test_bit(HCI_MGMT, &hdev->flags))
 		mgmt_discovering(hdev->id, 0);
 
 	hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status);
@@ -76,8 +76,8 @@
 	if (status)
 		return;
 
-	if (test_bit(HCI_MGMT, &hdev->flags) &&
-				test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+	if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+				test_bit(HCI_MGMT, &hdev->flags))
 		mgmt_discovering(hdev->id, 0);
 
 	hci_conn_check_pending(hdev);
@@ -959,9 +959,8 @@
 		return;
 	}
 
-	if (test_bit(HCI_MGMT, &hdev->flags) &&
-					!test_and_set_bit(HCI_INQUIRY,
-							&hdev->flags))
+	if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags) &&
+				test_bit(HCI_MGMT, &hdev->flags))
 		mgmt_discovering(hdev->id, 1);
 }
 
@@ -1340,8 +1339,8 @@
 
 	BT_DBG("%s status %d", hdev->name, status);
 
-	if (test_bit(HCI_MGMT, &hdev->flags) &&
-				test_and_clear_bit(HCI_INQUIRY, &hdev->flags))
+	if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) &&
+				test_bit(HCI_MGMT, &hdev->flags))
 		mgmt_discovering(hdev->id, 0);
 
 	hci_req_complete(hdev, HCI_OP_INQUIRY, status);
diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig
index ba6f73e..a9aff9c 100644
--- a/net/bridge/netfilter/Kconfig
+++ b/net/bridge/netfilter/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig BRIDGE_NF_EBTABLES
 	tristate "Ethernet Bridge tables (ebtables) support"
-	depends on BRIDGE && BRIDGE_NETFILTER
+	depends on BRIDGE && NETFILTER
 	select NETFILTER_XTABLES
 	help
 	  ebtables is a general, extensible frame/packet identification
diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c
index 7c2fa0a..7f9ac07 100644
--- a/net/caif/caif_dev.c
+++ b/net/caif/caif_dev.c
@@ -93,10 +93,14 @@
 	caifdevs = caif_device_list(dev_net(dev));
 	BUG_ON(!caifdevs);
 
-	caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC);
+	caifd = kzalloc(sizeof(*caifd), GFP_KERNEL);
 	if (!caifd)
 		return NULL;
 	caifd->pcpu_refcnt = alloc_percpu(int);
+	if (!caifd->pcpu_refcnt) {
+		kfree(caifd);
+		return NULL;
+	}
 	caifd->netdev = dev;
 	dev_hold(dev);
 	return caifd;
diff --git a/net/can/af_can.c b/net/can/af_can.c
index 8ce926d..9b0c32a 100644
--- a/net/can/af_can.c
+++ b/net/can/af_can.c
@@ -857,7 +857,7 @@
 	struct net_device *dev;
 
 	if (stats_timer)
-		del_timer(&can_stattimer);
+		del_timer_sync(&can_stattimer);
 
 	can_remove_proc();
 
diff --git a/net/can/bcm.c b/net/can/bcm.c
index d6c8ae5..c84963d 100644
--- a/net/can/bcm.c
+++ b/net/can/bcm.c
@@ -344,6 +344,18 @@
 	}
 }
 
+static void bcm_tx_start_timer(struct bcm_op *op)
+{
+	if (op->kt_ival1.tv64 && op->count)
+		hrtimer_start(&op->timer,
+			      ktime_add(ktime_get(), op->kt_ival1),
+			      HRTIMER_MODE_ABS);
+	else if (op->kt_ival2.tv64)
+		hrtimer_start(&op->timer,
+			      ktime_add(ktime_get(), op->kt_ival2),
+			      HRTIMER_MODE_ABS);
+}
+
 static void bcm_tx_timeout_tsklet(unsigned long data)
 {
 	struct bcm_op *op = (struct bcm_op *)data;
@@ -365,26 +377,12 @@
 
 			bcm_send_to_user(op, &msg_head, NULL, 0);
 		}
-	}
-
-	if (op->kt_ival1.tv64 && (op->count > 0)) {
-
-		/* send (next) frame */
 		bcm_can_tx(op);
-		hrtimer_start(&op->timer,
-			      ktime_add(ktime_get(), op->kt_ival1),
-			      HRTIMER_MODE_ABS);
 
-	} else {
-		if (op->kt_ival2.tv64) {
+	} else if (op->kt_ival2.tv64)
+		bcm_can_tx(op);
 
-			/* send (next) frame */
-			bcm_can_tx(op);
-			hrtimer_start(&op->timer,
-				      ktime_add(ktime_get(), op->kt_ival2),
-				      HRTIMER_MODE_ABS);
-		}
-	}
+	bcm_tx_start_timer(op);
 }
 
 /*
@@ -964,23 +962,20 @@
 			hrtimer_cancel(&op->timer);
 	}
 
-	if ((op->flags & STARTTIMER) &&
-	    ((op->kt_ival1.tv64 && op->count) || op->kt_ival2.tv64)) {
-
+	if (op->flags & STARTTIMER) {
+		hrtimer_cancel(&op->timer);
 		/* spec: send can_frame when starting timer */
 		op->flags |= TX_ANNOUNCE;
-
-		if (op->kt_ival1.tv64 && (op->count > 0)) {
-			/* op->count-- is done in bcm_tx_timeout_handler */
-			hrtimer_start(&op->timer, op->kt_ival1,
-				      HRTIMER_MODE_REL);
-		} else
-			hrtimer_start(&op->timer, op->kt_ival2,
-				      HRTIMER_MODE_REL);
 	}
 
-	if (op->flags & TX_ANNOUNCE)
+	if (op->flags & TX_ANNOUNCE) {
 		bcm_can_tx(op);
+		if (op->count)
+			op->count--;
+	}
+
+	if (op->flags & STARTTIMER)
+		bcm_tx_start_timer(op);
 
 	return msg_head->nframes * CFSIZ + MHSIZ;
 }
diff --git a/net/ceph/ceph_common.c b/net/ceph/ceph_common.c
index 132963a..2883ea0 100644
--- a/net/ceph/ceph_common.c
+++ b/net/ceph/ceph_common.c
@@ -232,6 +232,7 @@
 		ceph_crypto_key_destroy(opt->key);
 		kfree(opt->key);
 	}
+	kfree(opt->mon_addr);
 	kfree(opt);
 }
 EXPORT_SYMBOL(ceph_destroy_options);
diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c
index c340e2e..9918e9e 100644
--- a/net/ceph/messenger.c
+++ b/net/ceph/messenger.c
@@ -2307,6 +2307,7 @@
 	m->front_max = front_len;
 	m->front_is_vmalloc = false;
 	m->more_to_follow = false;
+	m->ack_stamp = 0;
 	m->pool = NULL;
 
 	/* middle */
diff --git a/net/ceph/osd_client.c b/net/ceph/osd_client.c
index 16836a7..88ad8a2 100644
--- a/net/ceph/osd_client.c
+++ b/net/ceph/osd_client.c
@@ -217,6 +217,7 @@
 	INIT_LIST_HEAD(&req->r_unsafe_item);
 	INIT_LIST_HEAD(&req->r_linger_item);
 	INIT_LIST_HEAD(&req->r_linger_osd);
+	INIT_LIST_HEAD(&req->r_req_lru_item);
 	req->r_flags = flags;
 
 	WARN_ON((flags & (CEPH_OSD_FLAG_READ|CEPH_OSD_FLAG_WRITE)) == 0);
@@ -816,13 +817,10 @@
 {
 	req->r_tid = ++osdc->last_tid;
 	req->r_request->hdr.tid = cpu_to_le64(req->r_tid);
-	INIT_LIST_HEAD(&req->r_req_lru_item);
-
 	dout("__register_request %p tid %lld\n", req, req->r_tid);
 	__insert_request(osdc, req);
 	ceph_osdc_get_request(req);
 	osdc->num_requests++;
-
 	if (osdc->num_requests == 1) {
 		dout(" first request, scheduling timeout\n");
 		__schedule_osd_timeout(osdc);
diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c
index e97c358..fd863fe7 100644
--- a/net/ceph/osdmap.c
+++ b/net/ceph/osdmap.c
@@ -339,6 +339,7 @@
 	struct ceph_pg_mapping *pg = NULL;
 	int c;
 
+	dout("__insert_pg_mapping %llx %p\n", *(u64 *)&new->pgid, new);
 	while (*p) {
 		parent = *p;
 		pg = rb_entry(parent, struct ceph_pg_mapping, node);
@@ -366,16 +367,33 @@
 	while (n) {
 		pg = rb_entry(n, struct ceph_pg_mapping, node);
 		c = pgid_cmp(pgid, pg->pgid);
-		if (c < 0)
+		if (c < 0) {
 			n = n->rb_left;
-		else if (c > 0)
+		} else if (c > 0) {
 			n = n->rb_right;
-		else
+		} else {
+			dout("__lookup_pg_mapping %llx got %p\n",
+			     *(u64 *)&pgid, pg);
 			return pg;
+		}
 	}
 	return NULL;
 }
 
+static int __remove_pg_mapping(struct rb_root *root, struct ceph_pg pgid)
+{
+	struct ceph_pg_mapping *pg = __lookup_pg_mapping(root, pgid);
+
+	if (pg) {
+		dout("__remove_pg_mapping %llx %p\n", *(u64 *)&pgid, pg);
+		rb_erase(&pg->node, root);
+		kfree(pg);
+		return 0;
+	}
+	dout("__remove_pg_mapping %llx dne\n", *(u64 *)&pgid);
+	return -ENOENT;
+}
+
 /*
  * rbtree of pg pool info
  */
@@ -711,7 +729,6 @@
 	void *start = *p;
 	int err = -EINVAL;
 	u16 version;
-	struct rb_node *rbp;
 
 	ceph_decode_16_safe(p, end, version, bad);
 	if (version > CEPH_OSDMAP_INC_VERSION) {
@@ -861,7 +878,6 @@
 	}
 
 	/* new_pg_temp */
-	rbp = rb_first(&map->pg_temp);
 	ceph_decode_32_safe(p, end, len, bad);
 	while (len--) {
 		struct ceph_pg_mapping *pg;
@@ -872,18 +888,6 @@
 		ceph_decode_copy(p, &pgid, sizeof(pgid));
 		pglen = ceph_decode_32(p);
 
-		/* remove any? */
-		while (rbp && pgid_cmp(rb_entry(rbp, struct ceph_pg_mapping,
-						node)->pgid, pgid) <= 0) {
-			struct ceph_pg_mapping *cur =
-				rb_entry(rbp, struct ceph_pg_mapping, node);
-
-			rbp = rb_next(rbp);
-			dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
-			rb_erase(&cur->node, &map->pg_temp);
-			kfree(cur);
-		}
-
 		if (pglen) {
 			/* insert */
 			ceph_decode_need(p, end, pglen*sizeof(u32), bad);
@@ -903,17 +907,11 @@
 			}
 			dout(" added pg_temp %llx len %d\n", *(u64 *)&pgid,
 			     pglen);
+		} else {
+			/* remove */
+			__remove_pg_mapping(&map->pg_temp, pgid);
 		}
 	}
-	while (rbp) {
-		struct ceph_pg_mapping *cur =
-			rb_entry(rbp, struct ceph_pg_mapping, node);
-
-		rbp = rb_next(rbp);
-		dout(" removed pg_temp %llx\n", *(u64 *)&cur->pgid);
-		rb_erase(&cur->node, &map->pg_temp);
-		kfree(cur);
-	}
 
 	/* ignore the rest */
 	*p = end;
@@ -1046,10 +1044,25 @@
 	struct ceph_pg_mapping *pg;
 	struct ceph_pg_pool_info *pool;
 	int ruleno;
-	unsigned poolid, ps, pps;
+	unsigned poolid, ps, pps, t;
 	int preferred;
 
+	poolid = le32_to_cpu(pgid.pool);
+	ps = le16_to_cpu(pgid.ps);
+	preferred = (s16)le16_to_cpu(pgid.preferred);
+
+	pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
+	if (!pool)
+		return NULL;
+
 	/* pg_temp? */
+	if (preferred >= 0)
+		t = ceph_stable_mod(ps, le32_to_cpu(pool->v.lpg_num),
+				    pool->lpgp_num_mask);
+	else
+		t = ceph_stable_mod(ps, le32_to_cpu(pool->v.pg_num),
+				    pool->pgp_num_mask);
+	pgid.ps = cpu_to_le16(t);
 	pg = __lookup_pg_mapping(&osdmap->pg_temp, pgid);
 	if (pg) {
 		*num = pg->len;
@@ -1057,18 +1070,6 @@
 	}
 
 	/* crush */
-	poolid = le32_to_cpu(pgid.pool);
-	ps = le16_to_cpu(pgid.ps);
-	preferred = (s16)le16_to_cpu(pgid.preferred);
-
-	/* don't forcefeed bad device ids to crush */
-	if (preferred >= osdmap->max_osd ||
-	    preferred >= osdmap->crush->max_devices)
-		preferred = -1;
-
-	pool = __lookup_pg_pool(&osdmap->pg_pools, poolid);
-	if (!pool)
-		return NULL;
 	ruleno = crush_find_rule(osdmap->crush, pool->v.crush_ruleset,
 				 pool->v.type, pool->v.size);
 	if (ruleno < 0) {
@@ -1078,6 +1079,11 @@
 		return NULL;
 	}
 
+	/* don't forcefeed bad device ids to crush */
+	if (preferred >= osdmap->max_osd ||
+	    preferred >= osdmap->crush->max_devices)
+		preferred = -1;
+
 	if (preferred >= 0)
 		pps = ceph_stable_mod(ps,
 				      le32_to_cpu(pool->v.lpgp_num),
diff --git a/net/core/dev.c b/net/core/dev.c
index 17d67b5..b10ff0a 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1515,6 +1515,14 @@
  */
 int dev_forward_skb(struct net_device *dev, struct sk_buff *skb)
 {
+	if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
+		if (skb_copy_ubufs(skb, GFP_ATOMIC)) {
+			atomic_long_inc(&dev->rx_dropped);
+			kfree_skb(skb);
+			return NET_RX_DROP;
+		}
+	}
+
 	skb_orphan(skb);
 	nf_reset(skb);
 
diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c
index e7ab0c0..3231b46 100644
--- a/net/core/fib_rules.c
+++ b/net/core/fib_rules.c
@@ -384,8 +384,8 @@
 		 */
 		list_for_each_entry(r, &ops->rules_list, list) {
 			if (r->action == FR_ACT_GOTO &&
-			    r->target == rule->pref) {
-				BUG_ON(rtnl_dereference(r->ctarget) != NULL);
+			    r->target == rule->pref &&
+			    rtnl_dereference(r->ctarget) == NULL) {
 				rcu_assign_pointer(r->ctarget, rule);
 				if (--ops->unresolved_rules == 0)
 					break;
diff --git a/net/core/flow.c b/net/core/flow.c
index bf32c33..555a456 100644
--- a/net/core/flow.c
+++ b/net/core/flow.c
@@ -30,6 +30,7 @@
 		struct hlist_node	hlist;
 		struct list_head	gc_list;
 	} u;
+	struct net			*net;
 	u16				family;
 	u8				dir;
 	u32				genid;
@@ -172,29 +173,26 @@
 
 static u32 flow_hash_code(struct flow_cache *fc,
 			  struct flow_cache_percpu *fcp,
-			  const struct flowi *key)
+			  const struct flowi *key,
+			  size_t keysize)
 {
 	const u32 *k = (const u32 *) key;
+	const u32 length = keysize * sizeof(flow_compare_t) / sizeof(u32);
 
-	return jhash2(k, (sizeof(*key) / sizeof(u32)), fcp->hash_rnd)
+	return jhash2(k, length, fcp->hash_rnd)
 		& (flow_cache_hash_size(fc) - 1);
 }
 
-typedef unsigned long flow_compare_t;
-
 /* I hear what you're saying, use memcmp.  But memcmp cannot make
- * important assumptions that we can here, such as alignment and
- * constant size.
+ * important assumptions that we can here, such as alignment.
  */
-static int flow_key_compare(const struct flowi *key1, const struct flowi *key2)
+static int flow_key_compare(const struct flowi *key1, const struct flowi *key2,
+			    size_t keysize)
 {
 	const flow_compare_t *k1, *k1_lim, *k2;
-	const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t);
-
-	BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t));
 
 	k1 = (const flow_compare_t *) key1;
-	k1_lim = k1 + n_elem;
+	k1_lim = k1 + keysize;
 
 	k2 = (const flow_compare_t *) key2;
 
@@ -215,6 +213,7 @@
 	struct flow_cache_entry *fle, *tfle;
 	struct hlist_node *entry;
 	struct flow_cache_object *flo;
+	size_t keysize;
 	unsigned int hash;
 
 	local_bh_disable();
@@ -222,6 +221,11 @@
 
 	fle = NULL;
 	flo = NULL;
+
+	keysize = flow_key_size(family);
+	if (!keysize)
+		goto nocache;
+
 	/* Packet really early in init?  Making flow_cache_init a
 	 * pre-smp initcall would solve this.  --RR */
 	if (!fcp->hash_table)
@@ -230,11 +234,12 @@
 	if (fcp->hash_rnd_recalc)
 		flow_new_hash_rnd(fc, fcp);
 
-	hash = flow_hash_code(fc, fcp, key);
+	hash = flow_hash_code(fc, fcp, key, keysize);
 	hlist_for_each_entry(tfle, entry, &fcp->hash_table[hash], u.hlist) {
-		if (tfle->family == family &&
+		if (tfle->net == net &&
+		    tfle->family == family &&
 		    tfle->dir == dir &&
-		    flow_key_compare(key, &tfle->key) == 0) {
+		    flow_key_compare(key, &tfle->key, keysize) == 0) {
 			fle = tfle;
 			break;
 		}
@@ -246,9 +251,10 @@
 
 		fle = kmem_cache_alloc(flow_cachep, GFP_ATOMIC);
 		if (fle) {
+			fle->net = net;
 			fle->family = family;
 			fle->dir = dir;
-			memcpy(&fle->key, key, sizeof(*key));
+			memcpy(&fle->key, key, keysize * sizeof(flow_compare_t));
 			fle->object = NULL;
 			hlist_add_head(&fle->u.hlist, &fcp->hash_table[hash]);
 			fcp->hash_count++;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 27002df..387703f 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -611,8 +611,21 @@
 }
 EXPORT_SYMBOL_GPL(skb_morph);
 
-/* skb frags copy userspace buffers to kernel */
-static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
+/*	skb_copy_ubufs	-	copy userspace skb frags buffers to kernel
+ *	@skb: the skb to modify
+ *	@gfp_mask: allocation priority
+ *
+ *	This must be called on SKBTX_DEV_ZEROCOPY skb.
+ *	It will copy all frags into kernel and drop the reference
+ *	to userspace pages.
+ *
+ *	If this function is called from an interrupt gfp_mask() must be
+ *	%GFP_ATOMIC.
+ *
+ *	Returns 0 on success or a negative error code on failure
+ *	to allocate kernel memory to copy to.
+ */
+int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask)
 {
 	int i;
 	int num_frags = skb_shinfo(skb)->nr_frags;
@@ -652,6 +665,8 @@
 		skb_shinfo(skb)->frags[i - 1].page = head;
 		head = (struct page *)head->private;
 	}
+
+	skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
 	return 0;
 }
 
@@ -677,7 +692,6 @@
 	if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
 		if (skb_copy_ubufs(skb, gfp_mask))
 			return NULL;
-		skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
 	}
 
 	n = skb + 1;
@@ -803,7 +817,6 @@
 				n = NULL;
 				goto out;
 			}
-			skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
 		}
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
 			skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i];
@@ -896,7 +909,6 @@
 		if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) {
 			if (skb_copy_ubufs(skb, gfp_mask))
 				goto nofrags;
-			skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY;
 		}
 		for (i = 0; i < skb_shinfo(skb)->nr_frags; i++)
 			get_page(skb_shinfo(skb)->frags[i].page);
diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c
index 27997d3..a246836 100644
--- a/net/ethernet/eth.c
+++ b/net/ethernet/eth.c
@@ -340,7 +340,7 @@
 	dev->addr_len		= ETH_ALEN;
 	dev->tx_queue_len	= 1000;	/* Ethernet wants good queues */
 	dev->flags		= IFF_BROADCAST|IFF_MULTICAST;
-	dev->priv_flags		= IFF_TX_SKB_SHARING;
+	dev->priv_flags		|= IFF_TX_SKB_SHARING;
 
 	memset(dev->broadcast, 0xFF, ETH_ALEN);
 
diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c
index 1b745d4..dd2b947 100644
--- a/net/ipv4/af_inet.c
+++ b/net/ipv4/af_inet.c
@@ -466,8 +466,13 @@
 		goto out;
 
 	if (addr->sin_family != AF_INET) {
+		/* Compatibility games : accept AF_UNSPEC (mapped to AF_INET)
+		 * only if s_addr is INADDR_ANY.
+		 */
 		err = -EAFNOSUPPORT;
-		goto out;
+		if (addr->sin_family != AF_UNSPEC ||
+		    addr->sin_addr.s_addr != htonl(INADDR_ANY))
+			goto out;
 	}
 
 	chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr);
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 33e2c35..80106d8 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -142,6 +142,14 @@
 };
 
 /* Release a nexthop info record */
+static void free_fib_info_rcu(struct rcu_head *head)
+{
+	struct fib_info *fi = container_of(head, struct fib_info, rcu);
+
+	if (fi->fib_metrics != (u32 *) dst_default_metrics)
+		kfree(fi->fib_metrics);
+	kfree(fi);
+}
 
 void free_fib_info(struct fib_info *fi)
 {
@@ -156,7 +164,7 @@
 	} endfor_nexthops(fi);
 	fib_info_cnt--;
 	release_net(fi->fib_net);
-	kfree_rcu(fi, rcu);
+	call_rcu(&fi->rcu, free_fib_info_rcu);
 }
 
 void fib_release_info(struct fib_info *fi)
diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c
index 5c9b9d9..e59aabd 100644
--- a/net/ipv4/netfilter/ip_queue.c
+++ b/net/ipv4/netfilter/ip_queue.c
@@ -218,6 +218,7 @@
 	return skb;
 
 nlmsg_failure:
+	kfree_skb(skb);
 	*errp = -EINVAL;
 	printk(KERN_ERR "ip_queue: error creating packet message\n");
 	return NULL;
@@ -313,7 +314,7 @@
 {
 	struct nf_queue_entry *entry;
 
-	if (vmsg->value > NF_MAX_VERDICT)
+	if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
 		return -EINVAL;
 
 	entry = ipq_find_dequeue_entry(vmsg->id);
@@ -358,12 +359,9 @@
 		break;
 
 	case IPQM_VERDICT:
-		if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
-			status = -EINVAL;
-		else
-			status = ipq_set_verdict(&pmsg->msg.verdict,
-						 len - sizeof(*pmsg));
-			break;
+		status = ipq_set_verdict(&pmsg->msg.verdict,
+					 len - sizeof(*pmsg));
+		break;
 	default:
 		status = -EINVAL;
 	}
diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c
index b14ec7d..4bfad5d 100644
--- a/net/ipv4/proc.c
+++ b/net/ipv4/proc.c
@@ -254,6 +254,8 @@
 	SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
 	SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
 	SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
+	SNMP_MIB_ITEM("TCPReqQFullDoCookies", LINUX_MIB_TCPREQQFULLDOCOOKIES),
+	SNMP_MIB_ITEM("TCPReqQFullDrop", LINUX_MIB_TCPREQQFULLDROP),
 	SNMP_MIB_SENTINEL
 };
 
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index ea0d218..21fab3e 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1124,7 +1124,7 @@
 		return 0;
 
 	/* ...Then it's D-SACK, and must reside below snd_una completely */
-	if (!after(end_seq, tp->snd_una))
+	if (after(end_seq, tp->snd_una))
 		return 0;
 
 	if (!before(start_seq, tp->undo_marker))
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index 1c12b8e..c34f015 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -808,20 +808,38 @@
 	kfree(inet_rsk(req)->opt);
 }
 
-static void syn_flood_warning(const struct sk_buff *skb)
+/*
+ * Return 1 if a syncookie should be sent
+ */
+int tcp_syn_flood_action(struct sock *sk,
+			 const struct sk_buff *skb,
+			 const char *proto)
 {
-	const char *msg;
+	const char *msg = "Dropping request";
+	int want_cookie = 0;
+	struct listen_sock *lopt;
+
+
 
 #ifdef CONFIG_SYN_COOKIES
-	if (sysctl_tcp_syncookies)
+	if (sysctl_tcp_syncookies) {
 		msg = "Sending cookies";
-	else
+		want_cookie = 1;
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES);
+	} else
 #endif
-		msg = "Dropping request";
+		NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP);
 
-	pr_info("TCP: Possible SYN flooding on port %d. %s.\n",
-				ntohs(tcp_hdr(skb)->dest), msg);
+	lopt = inet_csk(sk)->icsk_accept_queue.listen_opt;
+	if (!lopt->synflood_warned) {
+		lopt->synflood_warned = 1;
+		pr_info("%s: Possible SYN flooding on port %d. %s. "
+			" Check SNMP counters.\n",
+			proto, ntohs(tcp_hdr(skb)->dest), msg);
+	}
+	return want_cookie;
 }
+EXPORT_SYMBOL(tcp_syn_flood_action);
 
 /*
  * Save and compile IPv4 options into the request_sock if needed.
@@ -1235,11 +1253,7 @@
 	__be32 saddr = ip_hdr(skb)->saddr;
 	__be32 daddr = ip_hdr(skb)->daddr;
 	__u32 isn = TCP_SKB_CB(skb)->when;
-#ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
-#else
-#define want_cookie 0 /* Argh, why doesn't gcc optimize this :( */
-#endif
 
 	/* Never answer to SYNs send to broadcast or multicast */
 	if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
@@ -1250,14 +1264,9 @@
 	 * evidently real one.
 	 */
 	if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
-		if (net_ratelimit())
-			syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
-		if (sysctl_tcp_syncookies) {
-			want_cookie = 1;
-		} else
-#endif
-		goto drop;
+		want_cookie = tcp_syn_flood_action(sk, skb, "TCP");
+		if (!want_cookie)
+			goto drop;
 	}
 
 	/* Accept backlog is full. If we have already queued enough
@@ -1303,9 +1312,7 @@
 		while (l-- > 0)
 			*c++ ^= *hash_location++;
 
-#ifdef CONFIG_SYN_COOKIES
 		want_cookie = 0;	/* not our kind of cookie */
-#endif
 		tmp_ext.cookie_out_never = 0; /* false */
 		tmp_ext.cookie_plus = tmp_opt.cookie_plus;
 	} else if (!tp->rx_opt.cookie_in_always) {
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index f012ebd..12368c5 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -374,8 +374,8 @@
 			"%s(): cannot allocate memory for statistics; dev=%s.\n",
 			__func__, dev->name));
 		neigh_parms_release(&nd_tbl, ndev->nd_parms);
-		ndev->dead = 1;
-		in6_dev_finish_destroy(ndev);
+		dev_put(dev);
+		kfree(ndev);
 		return NULL;
 	}
 
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 9ef1831..b46e9f8 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -599,7 +599,7 @@
 	return 0;
 }
 
-int datagram_send_ctl(struct net *net,
+int datagram_send_ctl(struct net *net, struct sock *sk,
 		      struct msghdr *msg, struct flowi6 *fl6,
 		      struct ipv6_txoptions *opt,
 		      int *hlimit, int *tclass, int *dontfrag)
@@ -658,7 +658,8 @@
 
 			if (addr_type != IPV6_ADDR_ANY) {
 				int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
-				if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+				if (!inet_sk(sk)->transparent &&
+				    !ipv6_chk_addr(net, &src_info->ipi6_addr,
 						   strict ? dev : NULL, 0))
 					err = -EINVAL;
 				else
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index f3caf1b..5430394 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -322,8 +322,8 @@
 }
 
 static struct ip6_flowlabel *
-fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval,
-	  int optlen, int *err_p)
+fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq,
+	  char __user *optval, int optlen, int *err_p)
 {
 	struct ip6_flowlabel *fl = NULL;
 	int olen;
@@ -360,7 +360,7 @@
 		msg.msg_control = (void*)(fl->opt+1);
 		memset(&flowi6, 0, sizeof(flowi6));
 
-		err = datagram_send_ctl(net, &msg, &flowi6, fl->opt, &junk,
+		err = datagram_send_ctl(net, sk, &msg, &flowi6, fl->opt, &junk,
 					&junk, &junk);
 		if (err)
 			goto done;
@@ -528,7 +528,7 @@
 		if (freq.flr_label & ~IPV6_FLOWLABEL_MASK)
 			return -EINVAL;
 
-		fl = fl_create(net, &freq, optval, optlen, &err);
+		fl = fl_create(net, sk, &freq, optval, optlen, &err);
 		if (fl == NULL)
 			return err;
 		sfl1 = kmalloc(sizeof(*sfl1), GFP_KERNEL);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 705c828..def0538 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -696,8 +696,10 @@
 	int err;
 
 	err = ip6mr_fib_lookup(net, &fl6, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	read_lock(&mrt_lock);
 	dev->stats.tx_bytes += skb->len;
@@ -2052,8 +2054,10 @@
 	int err;
 
 	err = ip6mr_fib_lookup(net, &fl6, &mrt);
-	if (err < 0)
+	if (err < 0) {
+		kfree_skb(skb);
 		return err;
+	}
 
 	read_lock(&mrt_lock);
 	cache = ip6mr_cache_find(mrt,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 147ede38..2fbda5f 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -475,7 +475,7 @@
 		msg.msg_controllen = optlen;
 		msg.msg_control = (void*)(opt+1);
 
-		retv = datagram_send_ctl(net, &msg, &fl6, opt, &junk, &junk,
+		retv = datagram_send_ctl(net, sk, &msg, &fl6, opt, &junk, &junk,
 					 &junk);
 		if (retv)
 			goto done;
diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c
index 2493948..e63c397 100644
--- a/net/ipv6/netfilter/ip6_queue.c
+++ b/net/ipv6/netfilter/ip6_queue.c
@@ -218,6 +218,7 @@
 	return skb;
 
 nlmsg_failure:
+	kfree_skb(skb);
 	*errp = -EINVAL;
 	printk(KERN_ERR "ip6_queue: error creating packet message\n");
 	return NULL;
@@ -313,7 +314,7 @@
 {
 	struct nf_queue_entry *entry;
 
-	if (vmsg->value > NF_MAX_VERDICT)
+	if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN)
 		return -EINVAL;
 
 	entry = ipq_find_dequeue_entry(vmsg->id);
@@ -358,12 +359,9 @@
 		break;
 
 	case IPQM_VERDICT:
-		if (pmsg->msg.verdict.value > NF_MAX_VERDICT)
-			status = -EINVAL;
-		else
-			status = ipq_set_verdict(&pmsg->msg.verdict,
-						 len - sizeof(*pmsg));
-			break;
+		status = ipq_set_verdict(&pmsg->msg.verdict,
+					 len - sizeof(*pmsg));
+		break;
 	default:
 		status = -EINVAL;
 	}
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 6a79f308..343852e 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -817,8 +817,8 @@
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
 		opt->tot_len = sizeof(struct ipv6_txoptions);
 
-		err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
-					&tclass, &dontfrag);
+		err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+					&hlimit, &tclass, &dontfrag);
 		if (err < 0) {
 			fl6_sock_release(flowlabel);
 			return err;
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 9e69eb0..fb545ed 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -104,6 +104,9 @@
 	struct inet_peer *peer;
 	u32 *p = NULL;
 
+	if (!(rt->dst.flags & DST_HOST))
+		return NULL;
+
 	if (!rt->rt6i_peer)
 		rt6_bind_peer(rt, 1);
 
@@ -241,7 +244,9 @@
 {
 	struct rt6_info *rt = dst_alloc(ops, dev, 0, 0, flags);
 
-	memset(&rt->rt6i_table, 0, sizeof(*rt) - sizeof(struct dst_entry));
+	if (rt != NULL)
+		memset(&rt->rt6i_table, 0,
+			sizeof(*rt) - sizeof(struct dst_entry));
 
 	return rt;
 }
@@ -252,6 +257,9 @@
 	struct inet6_dev *idev = rt->rt6i_idev;
 	struct inet_peer *peer = rt->rt6i_peer;
 
+	if (!(rt->dst.flags & DST_HOST))
+		dst_destroy_metrics_generic(dst);
+
 	if (idev != NULL) {
 		rt->rt6i_idev = NULL;
 		in6_dev_put(idev);
@@ -723,9 +731,7 @@
 			ipv6_addr_copy(&rt->rt6i_gateway, daddr);
 		}
 
-		rt->rt6i_dst.plen = 128;
 		rt->rt6i_flags |= RTF_CACHE;
-		rt->dst.flags |= DST_HOST;
 
 #ifdef CONFIG_IPV6_SUBTREES
 		if (rt->rt6i_src.plen && saddr) {
@@ -775,9 +781,7 @@
 	struct rt6_info *rt = ip6_rt_copy(ort, daddr);
 
 	if (rt) {
-		rt->rt6i_dst.plen = 128;
 		rt->rt6i_flags |= RTF_CACHE;
-		rt->dst.flags |= DST_HOST;
 		dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst)));
 	}
 	return rt;
@@ -1078,12 +1082,15 @@
 			neigh = NULL;
 	}
 
-	rt->rt6i_idev     = idev;
+	rt->dst.flags |= DST_HOST;
+	rt->dst.output  = ip6_output;
 	dst_set_neighbour(&rt->dst, neigh);
 	atomic_set(&rt->dst.__refcnt, 1);
-	ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
 	dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255);
-	rt->dst.output  = ip6_output;
+
+	ipv6_addr_copy(&rt->rt6i_dst.addr, addr);
+	rt->rt6i_dst.plen = 128;
+	rt->rt6i_idev     = idev;
 
 	spin_lock_bh(&icmp6_dst_lock);
 	rt->dst.next = icmp6_dst_gc_list;
@@ -1261,6 +1268,14 @@
 	if (rt->rt6i_dst.plen == 128)
 	       rt->dst.flags |= DST_HOST;
 
+	if (!(rt->dst.flags & DST_HOST) && cfg->fc_mx) {
+		u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL);
+		if (!metrics) {
+			err = -ENOMEM;
+			goto out;
+		}
+		dst_init_metrics(&rt->dst, metrics, 0);
+	}
 #ifdef CONFIG_IPV6_SUBTREES
 	ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len);
 	rt->rt6i_src.plen = cfg->fc_src_len;
@@ -1607,9 +1622,6 @@
 	if (on_link)
 		nrt->rt6i_flags &= ~RTF_GATEWAY;
 
-	nrt->rt6i_dst.plen = 128;
-	nrt->dst.flags |= DST_HOST;
-
 	ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key);
 	dst_set_neighbour(&nrt->dst, neigh_clone(neigh));
 
@@ -1754,9 +1766,10 @@
 	if (rt) {
 		rt->dst.input = ort->dst.input;
 		rt->dst.output = ort->dst.output;
+		rt->dst.flags |= DST_HOST;
 
 		ipv6_addr_copy(&rt->rt6i_dst.addr, dest);
-		rt->rt6i_dst.plen = ort->rt6i_dst.plen;
+		rt->rt6i_dst.plen = 128;
 		dst_copy_metrics(&rt->dst, &ort->dst);
 		rt->dst.error = ort->dst.error;
 		rt->rt6i_idev = ort->rt6i_idev;
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index d1fb63f..79cc646 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -531,20 +531,6 @@
 	return tcp_v6_send_synack(sk, req, rvp);
 }
 
-static inline void syn_flood_warning(struct sk_buff *skb)
-{
-#ifdef CONFIG_SYN_COOKIES
-	if (sysctl_tcp_syncookies)
-		printk(KERN_INFO
-		       "TCPv6: Possible SYN flooding on port %d. "
-		       "Sending cookies.\n", ntohs(tcp_hdr(skb)->dest));
-	else
-#endif
-		printk(KERN_INFO
-		       "TCPv6: Possible SYN flooding on port %d. "
-		       "Dropping request.\n", ntohs(tcp_hdr(skb)->dest));
-}
-
 static void tcp_v6_reqsk_destructor(struct request_sock *req)
 {
 	kfree_skb(inet6_rsk(req)->pktopts);
@@ -1179,11 +1165,7 @@
 	struct tcp_sock *tp = tcp_sk(sk);
 	__u32 isn = TCP_SKB_CB(skb)->when;
 	struct dst_entry *dst = NULL;
-#ifdef CONFIG_SYN_COOKIES
 	int want_cookie = 0;
-#else
-#define want_cookie 0
-#endif
 
 	if (skb->protocol == htons(ETH_P_IP))
 		return tcp_v4_conn_request(sk, skb);
@@ -1192,14 +1174,9 @@
 		goto drop;
 
 	if (inet_csk_reqsk_queue_is_full(sk) && !isn) {
-		if (net_ratelimit())
-			syn_flood_warning(skb);
-#ifdef CONFIG_SYN_COOKIES
-		if (sysctl_tcp_syncookies)
-			want_cookie = 1;
-		else
-#endif
-		goto drop;
+		want_cookie = tcp_syn_flood_action(sk, skb, "TCPv6");
+		if (!want_cookie)
+			goto drop;
 	}
 
 	if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
@@ -1249,9 +1226,7 @@
 		while (l-- > 0)
 			*c++ ^= *hash_location++;
 
-#ifdef CONFIG_SYN_COOKIES
 		want_cookie = 0;	/* not our kind of cookie */
-#endif
 		tmp_ext.cookie_out_never = 0; /* false */
 		tmp_ext.cookie_plus = tmp_opt.cookie_plus;
 	} else if (!tp->rx_opt.cookie_in_always) {
@@ -1408,6 +1383,8 @@
 		newtp->af_specific = &tcp_sock_ipv6_mapped_specific;
 #endif
 
+		newnp->ipv6_ac_list = NULL;
+		newnp->ipv6_fl_list = NULL;
 		newnp->pktoptions  = NULL;
 		newnp->opt	   = NULL;
 		newnp->mcast_oif   = inet6_iif(skb);
@@ -1472,6 +1449,7 @@
 	   First: no IPv4 options.
 	 */
 	newinet->inet_opt = NULL;
+	newnp->ipv6_ac_list = NULL;
 	newnp->ipv6_fl_list = NULL;
 
 	/* Clone RX bits */
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 29213b5..bb95e8e 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -1090,8 +1090,8 @@
 		memset(opt, 0, sizeof(struct ipv6_txoptions));
 		opt->tot_len = sizeof(*opt);
 
-		err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit,
-					&tclass, &dontfrag);
+		err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt,
+					&hlimit, &tclass, &dontfrag);
 		if (err < 0) {
 			fl6_sock_release(flowlabel);
 			return err;
diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c
index d0b70da..2615ffc 100644
--- a/net/irda/irsysctl.c
+++ b/net/irda/irsysctl.c
@@ -40,9 +40,9 @@
 extern int  sysctl_fast_poll_increase;
 extern char sysctl_devname[];
 extern int  sysctl_max_baud_rate;
-extern int  sysctl_min_tx_turn_time;
-extern int  sysctl_max_tx_data_size;
-extern int  sysctl_max_tx_window;
+extern unsigned int sysctl_min_tx_turn_time;
+extern unsigned int sysctl_max_tx_data_size;
+extern unsigned int sysctl_max_tx_window;
 extern int  sysctl_max_noreply_time;
 extern int  sysctl_warn_noreply_time;
 extern int  sysctl_lap_keepalive_time;
diff --git a/net/irda/qos.c b/net/irda/qos.c
index 1b51bcf..4369f7f 100644
--- a/net/irda/qos.c
+++ b/net/irda/qos.c
@@ -60,7 +60,7 @@
  * Default is 10us which means using the unmodified value given by the
  * peer except if it's 0 (0 is likely a bug in the other stack).
  */
-unsigned sysctl_min_tx_turn_time = 10;
+unsigned int sysctl_min_tx_turn_time = 10;
 /*
  * Maximum data size to be used in transmission in payload of LAP frame.
  * There is a bit of confusion in the IrDA spec :
@@ -75,13 +75,13 @@
  * bytes frames or all negotiated frame sizes, but you can use the sysctl
  * to play with this value anyway.
  * Jean II */
-unsigned sysctl_max_tx_data_size = 2042;
+unsigned int sysctl_max_tx_data_size = 2042;
 /*
  * Maximum transmit window, i.e. number of LAP frames between turn-around.
  * This allow to override what the peer told us. Some peers are buggy and
  * don't always support what they tell us.
  * Jean II */
-unsigned sysctl_max_tx_window = 7;
+unsigned int sysctl_max_tx_window = 7;
 
 static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get);
 static int irlap_param_link_disconnect(void *instance, irda_param_t *parm,
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index 3db78b6..21070e9 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -665,7 +665,7 @@
 		BUG_ON(!sdata->bss);
 
 		atomic_dec(&sdata->bss->num_sta_ps);
-		__sta_info_clear_tim_bit(sdata->bss, sta);
+		sta_info_clear_tim_bit(sta);
 	}
 
 	local->num_sta--;
diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c
index 2fd4565..31d56b2 100644
--- a/net/netfilter/nf_conntrack_pptp.c
+++ b/net/netfilter/nf_conntrack_pptp.c
@@ -364,6 +364,7 @@
 		break;
 
 	case PPTP_WAN_ERROR_NOTIFY:
+	case PPTP_SET_LINK_INFO:
 	case PPTP_ECHO_REQUEST:
 	case PPTP_ECHO_REPLY:
 		/* I don't have to explain these ;) */
diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c
index 37bf943..8235b86 100644
--- a/net/netfilter/nf_conntrack_proto_tcp.c
+++ b/net/netfilter/nf_conntrack_proto_tcp.c
@@ -409,7 +409,7 @@
 			if (opsize < 2) /* "silly options" */
 				return;
 			if (opsize > length)
-				break;	/* don't parse partial options */
+				return;	/* don't parse partial options */
 
 			if (opcode == TCPOPT_SACK_PERM
 			    && opsize == TCPOLEN_SACK_PERM)
@@ -447,7 +447,7 @@
 	BUG_ON(ptr == NULL);
 
 	/* Fast path for timestamp-only option */
-	if (length == TCPOLEN_TSTAMP_ALIGNED*4
+	if (length == TCPOLEN_TSTAMP_ALIGNED
 	    && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24)
 				       | (TCPOPT_NOP << 16)
 				       | (TCPOPT_TIMESTAMP << 8)
@@ -469,7 +469,7 @@
 			if (opsize < 2) /* "silly options" */
 				return;
 			if (opsize > length)
-				break;	/* don't parse partial options */
+				return;	/* don't parse partial options */
 
 			if (opcode == TCPOPT_SACK
 			    && opsize >= (TCPOLEN_SACK_BASE
diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c
index 00bd475..a80b0cb 100644
--- a/net/netfilter/nfnetlink_queue.c
+++ b/net/netfilter/nfnetlink_queue.c
@@ -646,8 +646,8 @@
 		return NULL;
 
 	vhdr = nla_data(nfqa[NFQA_VERDICT_HDR]);
-	verdict = ntohl(vhdr->verdict);
-	if ((verdict & NF_VERDICT_MASK) > NF_MAX_VERDICT)
+	verdict = ntohl(vhdr->verdict) & NF_VERDICT_MASK;
+	if (verdict > NF_MAX_VERDICT || verdict == NF_STOLEN)
 		return NULL;
 	return vhdr;
 }
diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c
index 76a0831..ed0db15 100644
--- a/net/netfilter/xt_rateest.c
+++ b/net/netfilter/xt_rateest.c
@@ -78,7 +78,7 @@
 {
 	struct xt_rateest_match_info *info = par->matchinfo;
 	struct xt_rateest *est1, *est2;
-	int ret = false;
+	int ret = -EINVAL;
 
 	if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS |
 				     XT_RATEEST_MATCH_REL)) != 1)
@@ -101,13 +101,12 @@
 	if (!est1)
 		goto err1;
 
+	est2 = NULL;
 	if (info->flags & XT_RATEEST_MATCH_REL) {
 		est2 = xt_rateest_lookup(info->name2);
 		if (!est2)
 			goto err2;
-	} else
-		est2 = NULL;
-
+	}
 
 	info->est1 = est1;
 	info->est2 = est2;
@@ -116,7 +115,7 @@
 err2:
 	xt_rateest_put(est1);
 err1:
-	return -EINVAL;
+	return ret;
 }
 
 static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index c698cec..fabb4fa 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -961,7 +961,10 @@
 	return 0;
 
 drop_n_acct:
-	po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);
+	spin_lock(&sk->sk_receive_queue.lock);
+	po->stats.tp_drops++;
+	atomic_inc(&sk->sk_drops);
+	spin_unlock(&sk->sk_receive_queue.lock);
 
 drop_n_restore:
 	if (skb_head != skb->data && skb_shared(skb)) {
diff --git a/net/rds/iw_rdma.c b/net/rds/iw_rdma.c
index 8b77edb..4e1de17 100644
--- a/net/rds/iw_rdma.c
+++ b/net/rds/iw_rdma.c
@@ -84,7 +84,8 @@
 static void rds_iw_free_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
 static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
 			struct list_head *unmap_list,
-			struct list_head *kill_list);
+			struct list_head *kill_list,
+			int *unpinned);
 static void rds_iw_destroy_fastreg(struct rds_iw_mr_pool *pool, struct rds_iw_mr *ibmr);
 
 static int rds_iw_get_device(struct rds_sock *rs, struct rds_iw_device **rds_iwdev, struct rdma_cm_id **cm_id)
@@ -499,7 +500,7 @@
 	LIST_HEAD(unmap_list);
 	LIST_HEAD(kill_list);
 	unsigned long flags;
-	unsigned int nfreed = 0, ncleaned = 0, free_goal;
+	unsigned int nfreed = 0, ncleaned = 0, unpinned = 0, free_goal;
 	int ret = 0;
 
 	rds_iw_stats_inc(s_iw_rdma_mr_pool_flush);
@@ -524,7 +525,8 @@
 	 * will be destroyed by the unmap function.
 	 */
 	if (!list_empty(&unmap_list)) {
-		ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list, &kill_list);
+		ncleaned = rds_iw_unmap_fastreg_list(pool, &unmap_list,
+						     &kill_list, &unpinned);
 		/* If we've been asked to destroy all MRs, move those
 		 * that were simply cleaned to the kill list */
 		if (free_all)
@@ -548,6 +550,7 @@
 		spin_unlock_irqrestore(&pool->list_lock, flags);
 	}
 
+	atomic_sub(unpinned, &pool->free_pinned);
 	atomic_sub(ncleaned, &pool->dirty_count);
 	atomic_sub(nfreed, &pool->item_count);
 
@@ -828,7 +831,8 @@
 
 static unsigned int rds_iw_unmap_fastreg_list(struct rds_iw_mr_pool *pool,
 				struct list_head *unmap_list,
-				struct list_head *kill_list)
+				struct list_head *kill_list,
+				int *unpinned)
 {
 	struct rds_iw_mapping *mapping, *next;
 	unsigned int ncleaned = 0;
@@ -855,6 +859,7 @@
 
 		spin_lock_irqsave(&pool->list_lock, flags);
 		list_for_each_entry_safe(mapping, next, unmap_list, m_list) {
+			*unpinned += mapping->m_sg.len;
 			list_move(&mapping->m_list, &laundered);
 			ncleaned++;
 		}
diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h
index be4505e..b014279 100644
--- a/net/sched/cls_rsvp.h
+++ b/net/sched/cls_rsvp.h
@@ -425,7 +425,7 @@
 	struct rsvp_filter *f, **fp;
 	struct rsvp_session *s, **sp;
 	struct tc_rsvp_pinfo *pinfo = NULL;
-	struct nlattr *opt = tca[TCA_OPTIONS-1];
+	struct nlattr *opt = tca[TCA_OPTIONS];
 	struct nlattr *tb[TCA_RSVP_MAX + 1];
 	struct tcf_exts e;
 	unsigned int h1, h2;
@@ -439,7 +439,7 @@
 	if (err < 0)
 		return err;
 
-	err = tcf_exts_validate(tp, tb, tca[TCA_RATE-1], &e, &rsvp_ext_map);
+	err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map);
 	if (err < 0)
 		return err;
 
@@ -449,8 +449,8 @@
 
 		if (f->handle != handle && handle)
 			goto errout2;
-		if (tb[TCA_RSVP_CLASSID-1]) {
-			f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+		if (tb[TCA_RSVP_CLASSID]) {
+			f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
 			tcf_bind_filter(tp, &f->res, base);
 		}
 
@@ -462,7 +462,7 @@
 	err = -EINVAL;
 	if (handle)
 		goto errout2;
-	if (tb[TCA_RSVP_DST-1] == NULL)
+	if (tb[TCA_RSVP_DST] == NULL)
 		goto errout2;
 
 	err = -ENOBUFS;
@@ -471,19 +471,19 @@
 		goto errout2;
 
 	h2 = 16;
-	if (tb[TCA_RSVP_SRC-1]) {
-		memcpy(f->src, nla_data(tb[TCA_RSVP_SRC-1]), sizeof(f->src));
+	if (tb[TCA_RSVP_SRC]) {
+		memcpy(f->src, nla_data(tb[TCA_RSVP_SRC]), sizeof(f->src));
 		h2 = hash_src(f->src);
 	}
-	if (tb[TCA_RSVP_PINFO-1]) {
-		pinfo = nla_data(tb[TCA_RSVP_PINFO-1]);
+	if (tb[TCA_RSVP_PINFO]) {
+		pinfo = nla_data(tb[TCA_RSVP_PINFO]);
 		f->spi = pinfo->spi;
 		f->tunnelhdr = pinfo->tunnelhdr;
 	}
-	if (tb[TCA_RSVP_CLASSID-1])
-		f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]);
+	if (tb[TCA_RSVP_CLASSID])
+		f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]);
 
-	dst = nla_data(tb[TCA_RSVP_DST-1]);
+	dst = nla_data(tb[TCA_RSVP_DST]);
 	h1 = hash_dst(dst, pinfo ? pinfo->protocol : 0, pinfo ? pinfo->tunnelid : 0);
 
 	err = -ENOMEM;
@@ -642,8 +642,7 @@
 	return -1;
 }
 
-static struct tcf_proto_ops RSVP_OPS = {
-	.next		=	NULL,
+static struct tcf_proto_ops RSVP_OPS __read_mostly = {
 	.kind		=	RSVP_ID,
 	.classify	=	rsvp_classify,
 	.init		=	rsvp_init,
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 167c880..76388b0 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -1689,6 +1689,11 @@
 		case SCTP_CMD_PURGE_ASCONF_QUEUE:
 			sctp_asconf_queue_teardown(asoc);
 			break;
+
+		case SCTP_CMD_SET_ASOC:
+			asoc = cmd->obj.asoc;
+			break;
+
 		default:
 			pr_warn("Impossible command: %u, %p\n",
 				cmd->verb, cmd->obj.ptr);
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index 49b847b..a0f31e6 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -2047,6 +2047,12 @@
 	sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc));
 	sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL());
 
+	/* Restore association pointer to provide SCTP command interpeter
+	 * with a valid context in case it needs to manipulate
+	 * the queues */
+	sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC,
+			 SCTP_ASOC((struct sctp_association *)asoc));
+
 	return retval;
 
 nomem:
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index e83e7fe..ea40d54 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4113,9 +4113,12 @@
 		if (len % sizeof(u32))
 			return -EINVAL;
 
+		if (settings->n_akm_suites > NL80211_MAX_NR_AKM_SUITES)
+			return -EINVAL;
+
 		memcpy(settings->akm_suites, data, len);
 
-		for (i = 0; i < settings->n_ciphers_pairwise; i++)
+		for (i = 0; i < settings->n_akm_suites; i++)
 			if (!nl80211_valid_akm_suite(settings->akm_suites[i]))
 				return -EINVAL;
 	}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 02751db..68a471b 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -852,6 +852,7 @@
 		return;
 	}
 
+	chan->beacon_found = false;
 	chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
 	chan->max_antenna_gain = min(chan->orig_mag,
 		(int) MBI_TO_DBI(power_rule->max_antenna_gain));
diff --git a/net/wireless/sme.c b/net/wireless/sme.c
index b7b6ff8..dec0fa2 100644
--- a/net/wireless/sme.c
+++ b/net/wireless/sme.c
@@ -118,6 +118,8 @@
 			     i++, j++)
 				request->channels[i] =
 					&wdev->wiphy->bands[band]->channels[j];
+			request->rates[band] =
+				(1 << wdev->wiphy->bands[band]->n_bitrates) - 1;
 		}
 	}
 	request->n_channels = n_channels;
diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c
index a026b0e..54a0dc2e 100644
--- a/net/xfrm/xfrm_input.c
+++ b/net/xfrm/xfrm_input.c
@@ -212,6 +212,11 @@
 		/* only the first xfrm gets the encap type */
 		encap_type = 0;
 
+		if (async && x->repl->check(x, skb, seq)) {
+			XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR);
+			goto drop_unlock;
+		}
+
 		x->repl->advance(x, seq);
 
 		x->curlft.bytes += skb->len;
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 94fdcc7..552df27 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -1349,14 +1349,16 @@
 		BUG();
 	}
 	xdst = dst_alloc(dst_ops, NULL, 0, 0, 0);
-	memset(&xdst->u.rt6.rt6i_table, 0, sizeof(*xdst) - sizeof(struct dst_entry));
-	xfrm_policy_put_afinfo(afinfo);
 
-	if (likely(xdst))
+	if (likely(xdst)) {
+		memset(&xdst->u.rt6.rt6i_table, 0,
+			sizeof(*xdst) - sizeof(struct dst_entry));
 		xdst->flo.ops = &xfrm_bundle_fc_ops;
-	else
+	} else
 		xdst = ERR_PTR(-ENOBUFS);
 
+	xfrm_policy_put_afinfo(afinfo);
+
 	return xdst;
 }
 
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 86d0caf..62e90b8 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1761,6 +1761,10 @@
 	snd_pcm_uframes_t avail = 0;
 	long wait_time, tout;
 
+	init_waitqueue_entry(&wait, current);
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&runtime->tsleep, &wait);
+
 	if (runtime->no_period_wakeup)
 		wait_time = MAX_SCHEDULE_TIMEOUT;
 	else {
@@ -1771,16 +1775,32 @@
 		}
 		wait_time = msecs_to_jiffies(wait_time * 1000);
 	}
-	init_waitqueue_entry(&wait, current);
-	add_wait_queue(&runtime->tsleep, &wait);
+
 	for (;;) {
 		if (signal_pending(current)) {
 			err = -ERESTARTSYS;
 			break;
 		}
+
+		/*
+		 * We need to check if space became available already
+		 * (and thus the wakeup happened already) first to close
+		 * the race of space already having become available.
+		 * This check must happen after been added to the waitqueue
+		 * and having current state be INTERRUPTIBLE.
+		 */
+		if (is_playback)
+			avail = snd_pcm_playback_avail(runtime);
+		else
+			avail = snd_pcm_capture_avail(runtime);
+		if (avail >= runtime->twake)
+			break;
 		snd_pcm_stream_unlock_irq(substream);
-		tout = schedule_timeout_interruptible(wait_time);
+
+		tout = schedule_timeout(wait_time);
+
 		snd_pcm_stream_lock_irq(substream);
+		set_current_state(TASK_INTERRUPTIBLE);
 		switch (runtime->status->state) {
 		case SNDRV_PCM_STATE_SUSPENDED:
 			err = -ESTRPIPE;
@@ -1806,14 +1826,9 @@
 			err = -EIO;
 			break;
 		}
-		if (is_playback)
-			avail = snd_pcm_playback_avail(runtime);
-		else
-			avail = snd_pcm_capture_avail(runtime);
-		if (avail >= runtime->twake)
-			break;
 	}
  _endloop:
+	set_current_state(TASK_RUNNING);
 	remove_wait_queue(&runtime->tsleep, &wait);
 	*availp = avail;
 	return err;
diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c
index f9123f0..32b02d9 100644
--- a/sound/pci/fm801.c
+++ b/sound/pci/fm801.c
@@ -68,6 +68,7 @@
 module_param_array(tea575x_tuner, int, NULL, 0444);
 MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only).");
 
+#define TUNER_DISABLED		(1<<3)
 #define TUNER_ONLY		(1<<4)
 #define TUNER_TYPE_MASK		(~TUNER_ONLY & 0xFFFF)
 
@@ -1150,7 +1151,8 @@
 
       __end_hw:
 #ifdef CONFIG_SND_FM801_TEA575X_BOOL
-	snd_tea575x_exit(&chip->tea);
+	if (!(chip->tea575x_tuner & TUNER_DISABLED))
+		snd_tea575x_exit(&chip->tea);
 #endif
 	if (chip->irq >= 0)
 		free_irq(chip->irq, chip);
@@ -1236,7 +1238,6 @@
 	    (tea575x_tuner & TUNER_TYPE_MASK) < 4) {
 		if (snd_tea575x_init(&chip->tea)) {
 			snd_printk(KERN_ERR "TEA575x radio not found\n");
-			snd_fm801_free(chip);
 			return -ENODEV;
 		}
 	} else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) {
@@ -1251,11 +1252,15 @@
 		}
 		if (tea575x_tuner == 4) {
 			snd_printk(KERN_ERR "TEA575x radio not found\n");
-			snd_fm801_free(chip);
-			return -ENODEV;
+			chip->tea575x_tuner = TUNER_DISABLED;
 		}
 	}
-	strlcpy(chip->tea.card, snd_fm801_tea575x_gpios[(tea575x_tuner & TUNER_TYPE_MASK) - 1].name, sizeof(chip->tea.card));
+	if (!(chip->tea575x_tuner & TUNER_DISABLED)) {
+		strlcpy(chip->tea.card,
+			snd_fm801_tea575x_gpios[(tea575x_tuner &
+						 TUNER_TYPE_MASK) - 1].name,
+			sizeof(chip->tea.card));
+	}
 #endif
 
 	*rchip = chip;
diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c
index 3e7850c..f3aefef 100644
--- a/sound/pci/hda/hda_codec.c
+++ b/sound/pci/hda/hda_codec.c
@@ -579,9 +579,13 @@
 		return -1;
 	}
 	recursive++;
-	for (i = 0; i < nums; i++)
+	for (i = 0; i < nums; i++) {
+		unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i]));
+		if (type == AC_WID_PIN || type == AC_WID_AUD_OUT)
+			continue;
 		if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0)
 			return i;
+	}
 	return -1;
 }
 EXPORT_SYMBOL_HDA(snd_hda_get_conn_index);
diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index be69822..e9a2a87 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1924,7 +1924,8 @@
 }
 
 static unsigned int azx_get_position(struct azx *chip,
-				     struct azx_dev *azx_dev)
+				     struct azx_dev *azx_dev,
+				     bool with_check)
 {
 	unsigned int pos;
 	int stream = azx_dev->substream->stream;
@@ -1940,7 +1941,7 @@
 	default:
 		/* use the position buffer */
 		pos = le32_to_cpu(*azx_dev->posbuf);
-		if (chip->position_fix[stream] == POS_FIX_AUTO) {
+		if (with_check && chip->position_fix[stream] == POS_FIX_AUTO) {
 			if (!pos || pos == (u32)-1) {
 				printk(KERN_WARNING
 				       "hda-intel: Invalid position buffer, "
@@ -1964,7 +1965,7 @@
 	struct azx *chip = apcm->chip;
 	struct azx_dev *azx_dev = get_azx_dev(substream);
 	return bytes_to_frames(substream->runtime,
-			       azx_get_position(chip, azx_dev));
+			       azx_get_position(chip, azx_dev, false));
 }
 
 /*
@@ -1987,7 +1988,7 @@
 		return -1;	/* bogus (too early) interrupt */
 
 	stream = azx_dev->substream->stream;
-	pos = azx_get_position(chip, azx_dev);
+	pos = azx_get_position(chip, azx_dev, true);
 
 	if (WARN_ONCE(!azx_dev->period_bytes,
 		      "hda-intel: zero azx_dev->period_bytes"))
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index d6c93d9..c45f3e6 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -535,7 +535,7 @@
 		      int index, unsigned int pval, int dir,
 		      struct snd_kcontrol **kctlp)
 {
-	char tmp[32];
+	char tmp[44];
 	struct snd_kcontrol_new knew =
 		HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT);
 	knew.private_value = pval;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7cabd73..7a73621 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -168,7 +168,7 @@
 	unsigned int auto_mic_valid_imux:1;	/* valid imux for auto-mic */
 	unsigned int automute:1;	/* HP automute enabled */
 	unsigned int detect_line:1;	/* Line-out detection enabled */
-	unsigned int automute_lines:1;	/* automute line-out as well */
+	unsigned int automute_lines:1;	/* automute line-out as well; NOP when automute_hp_lo isn't set */
 	unsigned int automute_hp_lo:1;	/* both HP and LO available */
 
 	/* other flags */
@@ -551,7 +551,7 @@
 	if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] ||
 	    spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0])
 		return;
-	if (!spec->automute_lines || !spec->automute)
+	if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines))
 		on = 0;
 	else
 		on = spec->jack_present;
@@ -578,6 +578,10 @@
 {
 	struct alc_spec *spec = codec->spec;
 
+	/* check LO jack only when it's different from HP */
+	if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0])
+		return;
+
 	spec->line_jack_present =
 		detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins),
 			     spec->autocfg.line_out_pins);
@@ -803,7 +807,7 @@
 	unsigned int val;
 	if (!spec->automute)
 		val = 0;
-	else if (!spec->automute_lines)
+	else if (!spec->automute_hp_lo || !spec->automute_lines)
 		val = 1;
 	else
 		val = 2;
@@ -824,7 +828,8 @@
 		spec->automute = 0;
 		break;
 	case 1:
-		if (spec->automute && !spec->automute_lines)
+		if (spec->automute &&
+		    (!spec->automute_hp_lo || !spec->automute_lines))
 			return 0;
 		spec->automute = 1;
 		spec->automute_lines = 0;
@@ -1320,7 +1325,9 @@
 	 * 15   : 1 --> enable the function "Mute internal speaker
 	 *	        when the external headphone out jack is plugged"
 	 */
-	if (!spec->autocfg.hp_pins[0]) {
+	if (!spec->autocfg.hp_pins[0] &&
+	    !(spec->autocfg.line_out_pins[0] &&
+	      spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) {
 		hda_nid_t nid;
 		tmp = (ass >> 11) & 0x3;	/* HP to chassis */
 		if (tmp == 0)
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 5145b66..987e3cf 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -5630,6 +5630,7 @@
 	switch (codec->vendor_id) {
 	case 0x111d76d1:
 	case 0x111d76d9:
+	case 0x111d76df:
 	case 0x111d76e5:
 	case 0x111d7666:
 	case 0x111d7667:
@@ -6573,6 +6574,7 @@
 	{ .id = 0x111d76cc, .name = "92HD89F3", .patch = patch_stac92hd73xx },
 	{ .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx },
 	{ .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx },
+	{ .id = 0x111d76df, .name = "92HD93BXX", .patch = patch_stac92hd83xxx},
 	{ .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx},
 	{ .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx},
 	{ .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx},
diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c
index a118a0f..5956584 100644
--- a/sound/soc/blackfin/bf5xx-ad193x.c
+++ b/sound/soc/blackfin/bf5xx-ad193x.c
@@ -103,7 +103,7 @@
 		.cpu_dai_name = "bfin-tdm.0",
 		.codec_dai_name ="ad193x-hifi",
 		.platform_name = "bfin-tdm-pcm-audio",
-		.codec_name = "ad193x.5",
+		.codec_name = "spi0.5",
 		.ops = &bf5xx_ad193x_ops,
 	},
 	{
@@ -112,7 +112,7 @@
 		.cpu_dai_name = "bfin-tdm.1",
 		.codec_dai_name ="ad193x-hifi",
 		.platform_name = "bfin-tdm-pcm-audio",
-		.codec_name = "ad193x.5",
+		.codec_name = "spi0.5",
 		.ops = &bf5xx_ad193x_ops,
 	},
 };
diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c
index 732a247..b94eb7e 100644
--- a/sound/soc/blackfin/bf5xx-ad73311.c
+++ b/sound/soc/blackfin/bf5xx-ad73311.c
@@ -128,7 +128,7 @@
 	return 0;
 }
 
-static int bf5xx_probe(struct platform_device *pdev)
+static int bf5xx_probe(struct snd_soc_card *card)
 {
 	int err;
 	if (gpio_request(GPIO_SE, "AD73311_SE")) {
diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 84f4ad5..9801cd7 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -431,7 +431,8 @@
 static int ssm2602_set_bias_level(struct snd_soc_codec *codec,
 				 enum snd_soc_bias_level level)
 {
-	u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f;
+	u16 reg = snd_soc_read(codec, SSM2602_PWR);
+	reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN);
 
 	switch (level) {
 	case SND_SOC_BIAS_ON:
diff --git a/sound/soc/codecs/wm8753.c b/sound/soc/codecs/wm8753.c
index ffa2ffe..aa091a0 100644
--- a/sound/soc/codecs/wm8753.c
+++ b/sound/soc/codecs/wm8753.c
@@ -1454,8 +1454,8 @@
 	/* set the update bits */
 	snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
 	snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
-	snd_soc_update_bits(codec, WM8753_LDAC, 0x0100, 0x0100);
-	snd_soc_update_bits(codec, WM8753_RDAC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_LADC, 0x0100, 0x0100);
+	snd_soc_update_bits(codec, WM8753_RADC, 0x0100, 0x0100);
 	snd_soc_update_bits(codec, WM8753_LOUT1V, 0x0100, 0x0100);
 	snd_soc_update_bits(codec, WM8753_ROUT1V, 0x0100, 0x0100);
 	snd_soc_update_bits(codec, WM8753_LOUT2V, 0x0100, 0x0100);
diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 1725550..d2c315f 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3479,31 +3479,6 @@
 }
 EXPORT_SYMBOL_GPL(wm8962_mic_detect);
 
-#ifdef CONFIG_PM
-static int wm8962_resume(struct snd_soc_codec *codec)
-{
-	u16 *reg_cache = codec->reg_cache;
-	int i;
-
-	/* Restore the registers */
-	for (i = 1; i < codec->driver->reg_cache_size; i++) {
-		switch (i) {
-		case WM8962_SOFTWARE_RESET:
-			continue;
-		default:
-			break;
-		}
-
-		if (reg_cache[i] != wm8962_reg[i])
-			snd_soc_write(codec, i, reg_cache[i]);
-	}
-
-	return 0;
-}
-#else
-#define wm8962_resume NULL
-#endif
-
 #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE)
 static int beep_rates[] = {
 	500, 1000, 2000, 4000,
@@ -4015,7 +3990,6 @@
 static struct snd_soc_codec_driver soc_codec_dev_wm8962 = {
 	.probe =	wm8962_probe,
 	.remove =	wm8962_remove,
-	.resume =	wm8962_resume,
 	.set_bias_level = wm8962_set_bias_level,
 	.reg_cache_size = WM8962_MAX_REGISTER + 1,
 	.reg_word_size = sizeof(u16),
diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c
index fd0dc46..5c6c245 100644
--- a/sound/soc/fsl/mpc5200_dma.c
+++ b/sound/soc/fsl/mpc5200_dma.c
@@ -369,7 +369,7 @@
 	.pcm_free	= &psc_dma_free,
 };
 
-static int mpc5200_hpcd_probe(struct of_device *op)
+static int mpc5200_hpcd_probe(struct platform_device *op)
 {
 	phys_addr_t fifo;
 	struct psc_dma *psc_dma;
@@ -487,7 +487,7 @@
 	return ret;
 }
 
-static int mpc5200_hpcd_remove(struct of_device *op)
+static int mpc5200_hpcd_remove(struct platform_device *op)
 {
 	struct psc_dma *psc_dma = dev_get_drvdata(&op->dev);
 
@@ -519,7 +519,7 @@
 static struct platform_driver mpc5200_hpcd_of_driver = {
 	.probe		= mpc5200_hpcd_probe,
 	.remove		= mpc5200_hpcd_remove,
-	.dev = {
+	.driver = {
 		.owner		= THIS_MODULE,
 		.name		= "mpc5200-pcm-audio",
 		.of_match_table    = mpc5200_hpcd_match,
diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c
index 309c59e..7945625 100644
--- a/sound/soc/imx/imx-pcm-fiq.c
+++ b/sound/soc/imx/imx-pcm-fiq.c
@@ -240,7 +240,6 @@
 
 static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd)
 {
-	struct snd_card *card = rtd->card->snd_card;
 	struct snd_soc_dai *dai = rtd->cpu_dai;
 	struct snd_pcm *pcm = rtd->pcm;
 	int ret;
diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c
index 8f16cd3..d0bcf3f 100644
--- a/sound/soc/kirkwood/kirkwood-i2s.c
+++ b/sound/soc/kirkwood/kirkwood-i2s.c
@@ -424,7 +424,7 @@
 	if (!priv->mem) {
 		dev_err(&pdev->dev, "request_mem_region failed\n");
 		err = -EBUSY;
-		goto error_alloc;
+		goto err_alloc;
 	}
 
 	priv->io = ioremap(priv->mem->start, SZ_16K);
diff --git a/sound/soc/omap/mcpdm.c b/sound/soc/omap/mcpdm.c
index 928f037..50e5919 100644
--- a/sound/soc/omap/mcpdm.c
+++ b/sound/soc/omap/mcpdm.c
@@ -449,7 +449,7 @@
 	return ret;
 }
 
-int __devexit omap_mcpdm_remove(struct platform_device *pdev)
+int omap_mcpdm_remove(struct platform_device *pdev)
 {
 	struct omap_mcpdm *mcpdm_ptr = platform_get_drvdata(pdev);
 
diff --git a/sound/soc/omap/mcpdm.h b/sound/soc/omap/mcpdm.h
index df3e16f..20c20a8 100644
--- a/sound/soc/omap/mcpdm.h
+++ b/sound/soc/omap/mcpdm.h
@@ -150,4 +150,4 @@
 extern void omap_mcpdm_free(void);
 extern int omap_mcpdm_set_offset(int offset1, int offset2);
 int __devinit omap_mcpdm_probe(struct platform_device *pdev);
-int __devexit omap_mcpdm_remove(struct platform_device *pdev);
+int omap_mcpdm_remove(struct platform_device *pdev);
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c
index ebcc2d4..478d607 100644
--- a/sound/soc/omap/omap-mcbsp.c
+++ b/sound/soc/omap/omap-mcbsp.c
@@ -516,6 +516,12 @@
 	struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
 	int err = 0;
 
+	if (mcbsp_data->active)
+		if (freq == mcbsp_data->in_freq)
+			return 0;
+		else
+			return -EBUSY;
+
 	/* The McBSP signal muxing functions are only available on McBSP1 */
 	if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR ||
 	    clk_id == OMAP_MCBSP_CLKR_SRC_CLKX ||
diff --git a/sound/soc/pxa/zylonite.c b/sound/soc/pxa/zylonite.c
index b644575..2b8350b 100644
--- a/sound/soc/pxa/zylonite.c
+++ b/sound/soc/pxa/zylonite.c
@@ -196,20 +196,20 @@
 	if (clk_pout) {
 		pout = clk_get(NULL, "CLK_POUT");
 		if (IS_ERR(pout)) {
-			dev_err(&pdev->dev, "Unable to obtain CLK_POUT: %ld\n",
+			dev_err(card->dev, "Unable to obtain CLK_POUT: %ld\n",
 				PTR_ERR(pout));
 			return PTR_ERR(pout);
 		}
 
 		ret = clk_enable(pout);
 		if (ret != 0) {
-			dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+			dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
 				ret);
 			clk_put(pout);
 			return ret;
 		}
 
-		dev_dbg(&pdev->dev, "MCLK enabled at %luHz\n",
+		dev_dbg(card->dev, "MCLK enabled at %luHz\n",
 			clk_get_rate(pout));
 	}
 
@@ -241,7 +241,7 @@
 	if (clk_pout) {
 		ret = clk_enable(pout);
 		if (ret != 0)
-			dev_err(&pdev->dev, "Unable to enable CLK_POUT: %d\n",
+			dev_err(card->dev, "Unable to enable CLK_POUT: %d\n",
 				ret);
 	}
 
diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c
index d9f8ade..20b7f3b 100644
--- a/sound/soc/soc-cache.c
+++ b/sound/soc/soc-cache.c
@@ -203,14 +203,14 @@
 		rbnode = rb_entry(node, struct snd_soc_rbtree_node, node);
 		for (i = 0; i < rbnode->blklen; ++i) {
 			regtmp = rbnode->base_reg + i;
-			WARN_ON(codec->writable_register &&
-				codec->writable_register(codec, regtmp));
 			val = snd_soc_rbtree_get_register(rbnode, i);
 			def = snd_soc_get_cache_val(codec->reg_def_copy, i,
 						    rbnode->word_size);
 			if (val == def)
 				continue;
 
+			WARN_ON(!snd_soc_codec_writable_register(codec, regtmp));
+
 			codec->cache_bypass = 1;
 			ret = snd_soc_write(codec, regtmp, val);
 			codec->cache_bypass = 0;
@@ -563,8 +563,7 @@
 
 	lzo_blocks = codec->reg_cache;
 	for_each_set_bit(i, lzo_blocks[0]->sync_bmp, lzo_blocks[0]->sync_bmp_nbits) {
-		WARN_ON(codec->writable_register &&
-			codec->writable_register(codec, i));
+		WARN_ON(!snd_soc_codec_writable_register(codec, i));
 		ret = snd_soc_cache_read(codec, i, &val);
 		if (ret)
 			return ret;
@@ -823,8 +822,6 @@
 
 	codec_drv = codec->driver;
 	for (i = 0; i < codec_drv->reg_cache_size; ++i) {
-		WARN_ON(codec->writable_register &&
-			codec->writable_register(codec, i));
 		ret = snd_soc_cache_read(codec, i, &val);
 		if (ret)
 			return ret;
@@ -832,6 +829,9 @@
 			if (snd_soc_get_cache_val(codec->reg_def_copy,
 						  i, codec_drv->reg_word_size) == val)
 				continue;
+
+		WARN_ON(!snd_soc_codec_writable_register(codec, i));
+
 		ret = snd_soc_write(codec, i, val);
 		if (ret)
 			return ret;
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index b085d8e..ef69f5a 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -30,6 +30,7 @@
 #include <linux/bitops.h>
 #include <linux/debugfs.h>
 #include <linux/platform_device.h>
+#include <linux/ctype.h>
 #include <linux/slab.h>
 #include <sound/ac97_codec.h>
 #include <sound/core.h>
@@ -1434,9 +1435,20 @@
 		 "%s", card->name);
 	snprintf(card->snd_card->longname, sizeof(card->snd_card->longname),
 		 "%s", card->long_name ? card->long_name : card->name);
-	if (card->driver_name)
-		strlcpy(card->snd_card->driver, card->driver_name,
-			sizeof(card->snd_card->driver));
+	snprintf(card->snd_card->driver, sizeof(card->snd_card->driver),
+		 "%s", card->driver_name ? card->driver_name : card->name);
+	for (i = 0; i < ARRAY_SIZE(card->snd_card->driver); i++) {
+		switch (card->snd_card->driver[i]) {
+		case '_':
+		case '-':
+		case '\0':
+			break;
+		default:
+			if (!isalnum(card->snd_card->driver[i]))
+				card->snd_card->driver[i] = '_';
+			break;
+		}
+	}
 
 	if (card->late_probe) {
 		ret = card->late_probe(card);
@@ -1633,7 +1645,7 @@
 	if (codec->readable_register)
 		return codec->readable_register(codec, reg);
 	else
-		return 0;
+		return 1;
 }
 EXPORT_SYMBOL_GPL(snd_soc_codec_readable_register);
 
@@ -1651,7 +1663,7 @@
 	if (codec->writable_register)
 		return codec->writable_register(codec, reg);
 	else
-		return 0;
+		return 1;
 }
 EXPORT_SYMBOL_GPL(snd_soc_codec_writable_register);
 
diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 7e15914..d67c637 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2763,7 +2763,7 @@
 
 /**
  * snd_soc_dapm_free - free dapm resources
- * @card: SoC device
+ * @dapm: DAPM context
  *
  * Free all dapm widgets and resources.
  */
diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c
index 38b0013..fa31d9c 100644
--- a/sound/soc/soc-jack.c
+++ b/sound/soc/soc-jack.c
@@ -105,7 +105,7 @@
 
 	snd_soc_dapm_sync(dapm);
 
-	snd_jack_report(jack->jack, status);
+	snd_jack_report(jack->jack, jack->status);
 
 out:
 	mutex_unlock(&codec->mutex);
diff --git a/sound/usb/card.c b/sound/usb/card.c
index 781d9e6..d8f2bf4 100644
--- a/sound/usb/card.c
+++ b/sound/usb/card.c
@@ -530,8 +530,11 @@
 	return chip;
 
  __error:
-	if (chip && !chip->num_interfaces)
-		snd_card_free(chip->card);
+	if (chip) {
+		if (!chip->num_interfaces)
+			snd_card_free(chip->card);
+		chip->probing = 0;
+	}
 	mutex_unlock(&register_mutex);
  __err_val:
 	return NULL;
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 3b8f7b8..e9d5c27 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -30,6 +30,8 @@
 # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds.
 #
 # Define NO_DWARF if you do not want debug-info analysis feature at all.
+#
+# Define WERROR=0 to disable treating any warnings as errors.
 
 $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE
 	@$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT)
@@ -63,6 +65,11 @@
 	endif
 endif
 
+# Treat warnings as errors unless directed not to
+ifneq ($(WERROR),0)
+	CFLAGS_WERROR := -Werror
+endif
+
 #
 # Include saner warnings here, which can catch bugs:
 #
@@ -95,7 +102,7 @@
   CFLAGS_OPTIMIZE = -O6
 endif
 
-CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
+CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS)
 EXTLIBS = -lpthread -lrt -lelf -lm
 ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64
 ALL_LDFLAGS = $(LDFLAGS)
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 6b0519f..f4c3fbe 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -161,6 +161,7 @@
 	struct perf_event_attr *attr = &evsel->attr;
 	int track = !evsel->idx; /* only the first counter needs these */
 
+	attr->disabled		= 1;
 	attr->inherit		= !no_inherit;
 	attr->read_format	= PERF_FORMAT_TOTAL_TIME_ENABLED |
 				  PERF_FORMAT_TOTAL_TIME_RUNNING |
@@ -671,6 +672,8 @@
 		}
 	}
 
+	perf_evlist__enable(evsel_list);
+
 	/*
 	 * Let the child rip
 	 */
diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c
index 55f4c76..efe696f 100644
--- a/tools/perf/builtin-test.c
+++ b/tools/perf/builtin-test.c
@@ -561,7 +561,7 @@
 		}
 
 		err = perf_event__parse_sample(event, attr.sample_type, sample_size,
-					       false, &sample);
+					       false, &sample, false);
 		if (err) {
 			pr_err("Can't parse sample, err = %d\n", err);
 			goto out_munmap;
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index a43433f..d28013b 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -191,7 +191,8 @@
 	symbol__annotate_zero_histograms(sym);
 }
 
-static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip)
+static void record_precise_ip(struct sym_entry *syme, struct map *map,
+			      int counter, u64 ip)
 {
 	struct annotation *notes;
 	struct symbol *sym;
@@ -205,8 +206,8 @@
 	if (pthread_mutex_trylock(&notes->lock))
 		return;
 
-	ip = syme->map->map_ip(syme->map, ip);
-	symbol__inc_addr_samples(sym, syme->map, counter, ip);
+	ip = map->map_ip(map, ip);
+	symbol__inc_addr_samples(sym, map, counter, ip);
 
 	pthread_mutex_unlock(&notes->lock);
 }
@@ -810,7 +811,7 @@
 		evsel = perf_evlist__id2evsel(top.evlist, sample->id);
 		assert(evsel != NULL);
 		syme->count[evsel->idx]++;
-		record_precise_ip(syme, evsel->idx, ip);
+		record_precise_ip(syme, al.map, evsel->idx, ip);
 		pthread_mutex_lock(&top.active_symbols_lock);
 		if (list_empty(&syme->node) || !syme->node.next) {
 			static bool first = true;
diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c
index 3c1b8a6..437f8ca 100644
--- a/tools/perf/util/event.c
+++ b/tools/perf/util/event.c
@@ -169,12 +169,17 @@
 			continue;
 		pbf += n + 3;
 		if (*pbf == 'x') { /* vm_exec */
+			char anonstr[] = "//anon\n";
 			char *execname = strchr(bf, '/');
 
 			/* Catch VDSO */
 			if (execname == NULL)
 				execname = strstr(bf, "[vdso]");
 
+			/* Catch anonymous mmaps */
+			if ((execname == NULL) && !strstr(bf, "["))
+				execname = anonstr;
+
 			if (execname == NULL)
 				continue;
 
diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h
index 1d7f664..357a85b 100644
--- a/tools/perf/util/event.h
+++ b/tools/perf/util/event.h
@@ -186,6 +186,6 @@
 
 int perf_event__parse_sample(const union perf_event *event, u64 type,
 			     int sample_size, bool sample_id_all,
-			     struct perf_sample *sample);
+			     struct perf_sample *sample, bool swapped);
 
 #endif /* __PERF_RECORD_H */
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index c12bd47..72e9f48 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -113,6 +113,19 @@
 	}
 }
 
+void perf_evlist__enable(struct perf_evlist *evlist)
+{
+	int cpu, thread;
+	struct perf_evsel *pos;
+
+	for (cpu = 0; cpu < evlist->cpus->nr; cpu++) {
+		list_for_each_entry(pos, &evlist->entries, node) {
+			for (thread = 0; thread < evlist->threads->nr; thread++)
+				ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE);
+		}
+	}
+}
+
 int perf_evlist__alloc_pollfd(struct perf_evlist *evlist)
 {
 	int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries;
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index ce85ae9..f349150 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -54,6 +54,7 @@
 void perf_evlist__munmap(struct perf_evlist *evlist);
 
 void perf_evlist__disable(struct perf_evlist *evlist);
+void perf_evlist__enable(struct perf_evlist *evlist);
 
 static inline void perf_evlist__set_maps(struct perf_evlist *evlist,
 					 struct cpu_map *cpus,
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index a03a36b..e389815 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -7,6 +7,8 @@
  * Released under the GPL v2. (and only v2, not any later version)
  */
 
+#include <byteswap.h>
+#include "asm/bug.h"
 #include "evsel.h"
 #include "evlist.h"
 #include "util.h"
@@ -342,10 +344,20 @@
 
 int perf_event__parse_sample(const union perf_event *event, u64 type,
 			     int sample_size, bool sample_id_all,
-			     struct perf_sample *data)
+			     struct perf_sample *data, bool swapped)
 {
 	const u64 *array;
 
+	/*
+	 * used for cross-endian analysis. See git commit 65014ab3
+	 * for why this goofiness is needed.
+	 */
+	union {
+		u64 val64;
+		u32 val32[2];
+	} u;
+
+
 	data->cpu = data->pid = data->tid = -1;
 	data->stream_id = data->id = data->time = -1ULL;
 
@@ -366,9 +378,16 @@
 	}
 
 	if (type & PERF_SAMPLE_TID) {
-		u32 *p = (u32 *)array;
-		data->pid = p[0];
-		data->tid = p[1];
+		u.val64 = *array;
+		if (swapped) {
+			/* undo swap of u64, then swap on individual u32s */
+			u.val64 = bswap_64(u.val64);
+			u.val32[0] = bswap_32(u.val32[0]);
+			u.val32[1] = bswap_32(u.val32[1]);
+		}
+
+		data->pid = u.val32[0];
+		data->tid = u.val32[1];
 		array++;
 	}
 
@@ -395,8 +414,15 @@
 	}
 
 	if (type & PERF_SAMPLE_CPU) {
-		u32 *p = (u32 *)array;
-		data->cpu = *p;
+
+		u.val64 = *array;
+		if (swapped) {
+			/* undo swap of u64, then swap on individual u32s */
+			u.val64 = bswap_64(u.val64);
+			u.val32[0] = bswap_32(u.val32[0]);
+		}
+
+		data->cpu = u.val32[0];
 		array++;
 	}
 
@@ -423,18 +449,27 @@
 	}
 
 	if (type & PERF_SAMPLE_RAW) {
-		u32 *p = (u32 *)array;
+		const u64 *pdata;
+
+		u.val64 = *array;
+		if (WARN_ONCE(swapped,
+			      "Endianness of raw data not corrected!\n")) {
+			/* undo swap of u64, then swap on individual u32s */
+			u.val64 = bswap_64(u.val64);
+			u.val32[0] = bswap_32(u.val32[0]);
+			u.val32[1] = bswap_32(u.val32[1]);
+		}
 
 		if (sample_overlap(event, array, sizeof(u32)))
 			return -EFAULT;
 
-		data->raw_size = *p;
-		p++;
+		data->raw_size = u.val32[0];
+		pdata = (void *) array + sizeof(u32);
 
-		if (sample_overlap(event, p, data->raw_size))
+		if (sample_overlap(event, pdata, data->raw_size))
 			return -EFAULT;
 
-		data->raw_data = p;
+		data->raw_data = (void *) pdata;
 	}
 
 	return 0;
diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c
index 555fc38..5d73262 100644
--- a/tools/perf/util/probe-finder.c
+++ b/tools/perf/util/probe-finder.c
@@ -659,7 +659,7 @@
 		if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die))
 			ret = -ENOENT;
 	}
-	if (ret == 0)
+	if (ret >= 0)
 		ret = convert_variable(&vr_die, pf);
 
 	if (ret < 0)
diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c
index cbc8f21..7624324 100644
--- a/tools/perf/util/python.c
+++ b/tools/perf/util/python.c
@@ -803,7 +803,7 @@
 		first = list_entry(evlist->entries.next, struct perf_evsel, node);
 		err = perf_event__parse_sample(event, first->attr.sample_type,
 					       perf_evsel__sample_size(first),
-					       sample_id_all, &pevent->sample);
+					       sample_id_all, &pevent->sample, false);
 		if (err)
 			return PyErr_Format(PyExc_OSError,
 					    "perf: can't parse sample, err=%d", err);
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index 170601e..974d0cb 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -162,7 +162,8 @@
 {
 	return perf_event__parse_sample(event, session->sample_type,
 					session->sample_size,
-					session->sample_id_all, sample);
+					session->sample_id_all, sample,
+					session->header.needs_swap);
 }
 
 struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session,
diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c
index 401e220..1ee8f1e 100644
--- a/tools/perf/util/sort.c
+++ b/tools/perf/util/sort.c
@@ -151,11 +151,17 @@
 {
 	u64 ip_l, ip_r;
 
+	if (!left->ms.sym && !right->ms.sym)
+		return right->level - left->level;
+
+	if (!left->ms.sym || !right->ms.sym)
+		return cmp_null(left->ms.sym, right->ms.sym);
+
 	if (left->ms.sym == right->ms.sym)
 		return 0;
 
-	ip_l = left->ms.sym ? left->ms.sym->start : left->ip;
-	ip_r = right->ms.sym ? right->ms.sym->start : right->ip;
+	ip_l = left->ms.sym->start;
+	ip_r = right->ms.sym->start;
 
 	return (int64_t)(ip_r - ip_l);
 }
diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c
index 469c026..40eeaf0 100644
--- a/tools/perf/util/symbol.c
+++ b/tools/perf/util/symbol.c
@@ -74,16 +74,104 @@
 
 bool symbol_type__is_a(char symbol_type, enum map_type map_type)
 {
+	symbol_type = toupper(symbol_type);
+
 	switch (map_type) {
 	case MAP__FUNCTION:
 		return symbol_type == 'T' || symbol_type == 'W';
 	case MAP__VARIABLE:
-		return symbol_type == 'D' || symbol_type == 'd';
+		return symbol_type == 'D';
 	default:
 		return false;
 	}
 }
 
+static int prefix_underscores_count(const char *str)
+{
+	const char *tail = str;
+
+	while (*tail == '_')
+		tail++;
+
+	return tail - str;
+}
+
+#define SYMBOL_A 0
+#define SYMBOL_B 1
+
+static int choose_best_symbol(struct symbol *syma, struct symbol *symb)
+{
+	s64 a;
+	s64 b;
+
+	/* Prefer a symbol with non zero length */
+	a = syma->end - syma->start;
+	b = symb->end - symb->start;
+	if ((b == 0) && (a > 0))
+		return SYMBOL_A;
+	else if ((a == 0) && (b > 0))
+		return SYMBOL_B;
+
+	/* Prefer a non weak symbol over a weak one */
+	a = syma->binding == STB_WEAK;
+	b = symb->binding == STB_WEAK;
+	if (b && !a)
+		return SYMBOL_A;
+	if (a && !b)
+		return SYMBOL_B;
+
+	/* Prefer a global symbol over a non global one */
+	a = syma->binding == STB_GLOBAL;
+	b = symb->binding == STB_GLOBAL;
+	if (a && !b)
+		return SYMBOL_A;
+	if (b && !a)
+		return SYMBOL_B;
+
+	/* Prefer a symbol with less underscores */
+	a = prefix_underscores_count(syma->name);
+	b = prefix_underscores_count(symb->name);
+	if (b > a)
+		return SYMBOL_A;
+	else if (a > b)
+		return SYMBOL_B;
+
+	/* If all else fails, choose the symbol with the longest name */
+	if (strlen(syma->name) >= strlen(symb->name))
+		return SYMBOL_A;
+	else
+		return SYMBOL_B;
+}
+
+static void symbols__fixup_duplicate(struct rb_root *symbols)
+{
+	struct rb_node *nd;
+	struct symbol *curr, *next;
+
+	nd = rb_first(symbols);
+
+	while (nd) {
+		curr = rb_entry(nd, struct symbol, rb_node);
+again:
+		nd = rb_next(&curr->rb_node);
+		next = rb_entry(nd, struct symbol, rb_node);
+
+		if (!nd)
+			break;
+
+		if (curr->start != next->start)
+			continue;
+
+		if (choose_best_symbol(curr, next) == SYMBOL_A) {
+			rb_erase(&next->rb_node, symbols);
+			goto again;
+		} else {
+			nd = rb_next(&curr->rb_node);
+			rb_erase(&curr->rb_node, symbols);
+		}
+	}
+}
+
 static void symbols__fixup_end(struct rb_root *symbols)
 {
 	struct rb_node *nd, *prevnd = rb_first(symbols);
@@ -438,18 +526,11 @@
 	char *line = NULL;
 	size_t n;
 	int err = -1;
-	u64 prev_start = 0;
-	char prev_symbol_type = 0;
-	char *prev_symbol_name;
 	FILE *file = fopen(filename, "r");
 
 	if (file == NULL)
 		goto out_failure;
 
-	prev_symbol_name = malloc(KSYM_NAME_LEN);
-	if (prev_symbol_name == NULL)
-		goto out_close;
-
 	err = 0;
 
 	while (!feof(file)) {
@@ -470,7 +551,7 @@
 		if (len + 2 >= line_len)
 			continue;
 
-		symbol_type = toupper(line[len]);
+		symbol_type = line[len];
 		len += 2;
 		symbol_name = line + len;
 		len = line_len - len;
@@ -480,24 +561,18 @@
 			break;
 		}
 
-		if (prev_symbol_type) {
-			u64 end = start;
-			if (end != prev_start)
-				--end;
-			err = process_symbol(arg, prev_symbol_name,
-					     prev_symbol_type, prev_start, end);
-			if (err)
-				break;
-		}
-
-		memcpy(prev_symbol_name, symbol_name, len + 1);
-		prev_symbol_type = symbol_type;
-		prev_start = start;
+		/*
+		 * module symbols are not sorted so we add all
+		 * symbols with zero length and rely on
+		 * symbols__fixup_end() to fix it up.
+		 */
+		err = process_symbol(arg, symbol_name,
+				     symbol_type, start, start);
+		if (err)
+			break;
 	}
 
-	free(prev_symbol_name);
 	free(line);
-out_close:
 	fclose(file);
 	return err;
 
@@ -703,6 +778,9 @@
 	if (dso__load_all_kallsyms(dso, filename, map) < 0)
 		return -1;
 
+	symbols__fixup_duplicate(&dso->symbols[map->type]);
+	symbols__fixup_end(&dso->symbols[map->type]);
+
 	if (dso->kernel == DSO_TYPE_GUEST_KERNEL)
 		dso->symtab_type = SYMTAB__GUEST_KALLSYMS;
 	else
@@ -1092,8 +1170,7 @@
 	if (dso->has_build_id) {
 		u8 build_id[BUILD_ID_SIZE];
 
-		if (elf_read_build_id(elf, build_id,
-				      BUILD_ID_SIZE) != BUILD_ID_SIZE)
+		if (elf_read_build_id(elf, build_id, BUILD_ID_SIZE) < 0)
 			goto out_elf_end;
 
 		if (!dso__build_id_equal(dso, build_id))
@@ -1111,6 +1188,8 @@
 	}
 
 	opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx);
+	if (opdshdr.sh_type != SHT_PROGBITS)
+		opdsec = NULL;
 	if (opdsec)
 		opddata = elf_rawdata(opdsec, NULL);
 
@@ -1276,6 +1355,7 @@
 	 * For misannotated, zeroed, ASM function sizes.
 	 */
 	if (nr > 0) {
+		symbols__fixup_duplicate(&dso->symbols[map->type]);
 		symbols__fixup_end(&dso->symbols[map->type]);
 		if (kmap) {
 			/*
@@ -1362,8 +1442,8 @@
 	ptr = data->d_buf;
 	while (ptr < (data->d_buf + data->d_size)) {
 		GElf_Nhdr *nhdr = ptr;
-		int namesz = NOTE_ALIGN(nhdr->n_namesz),
-		    descsz = NOTE_ALIGN(nhdr->n_descsz);
+		size_t namesz = NOTE_ALIGN(nhdr->n_namesz),
+		       descsz = NOTE_ALIGN(nhdr->n_descsz);
 		const char *name;
 
 		ptr += sizeof(*nhdr);
@@ -1372,8 +1452,10 @@
 		if (nhdr->n_type == NT_GNU_BUILD_ID &&
 		    nhdr->n_namesz == sizeof("GNU")) {
 			if (memcmp(name, "GNU", sizeof("GNU")) == 0) {
-				memcpy(bf, ptr, BUILD_ID_SIZE);
-				err = BUILD_ID_SIZE;
+				size_t sz = min(size, descsz);
+				memcpy(bf, ptr, sz);
+				memset(bf + sz, 0, size - sz);
+				err = descsz;
 				break;
 			}
 		}
@@ -1425,7 +1507,7 @@
 	while (1) {
 		char bf[BUFSIZ];
 		GElf_Nhdr nhdr;
-		int namesz, descsz;
+		size_t namesz, descsz;
 
 		if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr))
 			break;
@@ -1434,15 +1516,16 @@
 		descsz = NOTE_ALIGN(nhdr.n_descsz);
 		if (nhdr.n_type == NT_GNU_BUILD_ID &&
 		    nhdr.n_namesz == sizeof("GNU")) {
-			if (read(fd, bf, namesz) != namesz)
+			if (read(fd, bf, namesz) != (ssize_t)namesz)
 				break;
 			if (memcmp(bf, "GNU", sizeof("GNU")) == 0) {
-				if (read(fd, build_id,
-				    BUILD_ID_SIZE) == BUILD_ID_SIZE) {
+				size_t sz = min(descsz, size);
+				if (read(fd, build_id, sz) == (ssize_t)sz) {
+					memset(build_id + sz, 0, size - sz);
 					err = 0;
 					break;
 				}
-			} else if (read(fd, bf, descsz) != descsz)
+			} else if (read(fd, bf, descsz) != (ssize_t)descsz)
 				break;
 		} else {
 			int n = namesz + descsz;