diff --git a/Documentation/usb/zc0301.txt b/Documentation/usb/zc0301.txt
index 0889ae6..0958384 100644
--- a/Documentation/usb/zc0301.txt
+++ b/Documentation/usb/zc0301.txt
@@ -68,11 +68,6 @@
   data transfers;
 - automatic detection of image sensor;
 - video format is standard JPEG;
-- full support for the capabilities of every possible image sensors that can
-  be connected to the ZC0301 bridges, including, for istance, red, green,
-  blue and global gain adjustments and exposure control (see "Supported
-  devices" paragraph for details);
-- use of default color settings for sunlight conditions;
 - dynamic driver control thanks to various module parameters (see "Module
   parameters" paragraph);
 - up to 64 cameras can be handled at the same time; they can be connected and
@@ -171,6 +166,14 @@
                 1 = force memory unmapping (save memory)
 Default:        0
 -------------------------------------------------------------------------------
+Name:           frame_timeout
+Type:           uint array (min = 0, max = 64)
+Syntax:         <n[,...]>
+Description:    Timeout for a video frame in seconds. This parameter is
+                specific for each detected camera. This parameter can be
+                changed at runtime thanks to the /sys filesystem interface.
+Default:        2
+-------------------------------------------------------------------------------
 Name:           debug
 Type:           ushort
 Syntax:         <n>
@@ -198,17 +201,23 @@
 
 Vendor ID  Product ID
 ---------  ----------
+0x10fd     0x8050
+0x041e     0x0417
+0x041e     0x041e
+0x041e     0x081c
+0x041e     0x0834
+0x041e     0x0835
 0x046d     0x08ae
+0x0ac8     0x0301
 
-The following image sensors are supported:
+The list above does not imply that all those devices work with this driver: up
+until now only the ones that mount the following image sensors are supported;
+kernel messages will always tell you whether this is the case:
 
 Model       Manufacturer
 -----       ------------
 PAS202BCB   PixArt Imaging, Inc.
 
-All the available control settings of each image sensor are supported through
-the V4L2 interface.
-
 
 9. Notes for V4L2 application developers
 ========================================
@@ -240,6 +249,6 @@
 - Informations about the chip internals needed to enable the I2C protocol have
   been taken from the documentation of the ZC030x Video4Linux1 driver written
   by Andrew Birkett <andy@nobugs.org>;
-- Initialization values of the ZC0301 controller connected to the PAS202BCB
+- The initialization values of the ZC0301 controller connected to the PAS202BCB
   image sensor have been taken from the SPCA5XX driver maintained by
   Michel Xhaard <mxhaard@magic.fr>.
diff --git a/drivers/usb/media/zc0301.h b/drivers/usb/media/zc0301.h
index cb1a082..9ba9135 100644
--- a/drivers/usb/media/zc0301.h
+++ b/drivers/usb/media/zc0301.h
@@ -34,7 +34,8 @@
 #include <linux/param.h>
 #include <linux/mutex.h>
 #include <linux/rwsem.h>
-#include <asm/semaphore.h>
+#include <linux/stddef.h>
+#include <linux/string.h>
 
 #include "zc0301_sensor.h"
 
@@ -51,7 +52,7 @@
 #define ZC0301_ALTERNATE_SETTING   7
 #define ZC0301_URB_TIMEOUT         msecs_to_jiffies(2 * ZC0301_ISO_PACKETS)
 #define ZC0301_CTRL_TIMEOUT        100
-#define ZC0301_FRAME_TIMEOUT       2 * 1000 * msecs_to_jiffies(1)
+#define ZC0301_FRAME_TIMEOUT       2
 
 /*****************************************************************************/
 
@@ -94,6 +95,7 @@
 
 struct zc0301_module_param {
 	u8 force_munmap;
+	u16 frame_timeout;
 };
 
 static DECLARE_RWSEM(zc0301_disconnect);
@@ -101,7 +103,7 @@
 struct zc0301_device {
 	struct video_device* v4ldev;
 
-	struct zc0301_sensor* sensor;
+	struct zc0301_sensor sensor;
 
 	struct usb_device* usbdev;
 	struct urb* urb[ZC0301_URBS];
@@ -129,11 +131,19 @@
 
 /*****************************************************************************/
 
+struct zc0301_device*
+zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id)
+{
+	if (usb_match_id(usb_ifnum_to_if(cam->usbdev, 0), id))
+		return cam;
+
+	return NULL;
+}
+
 void
 zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor)
 {
-	cam->sensor = sensor;
-	cam->sensor->usbdev = cam->usbdev;
+	memcpy(&cam->sensor, sensor, sizeof(struct zc0301_sensor));
 }
 
 /*****************************************************************************/
diff --git a/drivers/usb/media/zc0301_core.c b/drivers/usb/media/zc0301_core.c
index 7e8b167..5773688 100644
--- a/drivers/usb/media/zc0301_core.c
+++ b/drivers/usb/media/zc0301_core.c
@@ -29,11 +29,9 @@
 #include <linux/moduleparam.h>
 #include <linux/errno.h>
 #include <linux/slab.h>
-#include <linux/string.h>
 #include <linux/device.h>
 #include <linux/fs.h>
 #include <linux/delay.h>
-#include <linux/stddef.h>
 #include <linux/compiler.h>
 #include <linux/ioctl.h>
 #include <linux/poll.h>
@@ -54,8 +52,8 @@
 #define ZC0301_MODULE_AUTHOR  "(C) 2006 Luca Risolia"
 #define ZC0301_AUTHOR_EMAIL   "<luca.risolia@studio.unibo.it>"
 #define ZC0301_MODULE_LICENSE "GPL"
-#define ZC0301_MODULE_VERSION "1:1.01"
-#define ZC0301_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 1)
+#define ZC0301_MODULE_VERSION "1:1.02"
+#define ZC0301_MODULE_VERSION_CODE  KERNEL_VERSION(1, 0, 2)
 
 /*****************************************************************************/
 
@@ -94,6 +92,15 @@
                  "\nDefault value is "__MODULE_STRING(SN9C102_FORCE_MUNMAP)"."
                  "\n");
 
+static unsigned int frame_timeout[] = {[0 ... ZC0301_MAX_DEVICES-1] =
+                                       ZC0301_FRAME_TIMEOUT};
+module_param_array(frame_timeout, uint, NULL, 0644);
+MODULE_PARM_DESC(frame_timeout,
+                 "\n<n[,...]> Timeout for a video frame in seconds."
+                 "\nThis parameter is specific for each detected camera."
+                 "\nDefault value is "__MODULE_STRING(ZC0301_FRAME_TIMEOUT)"."
+                 "\n");
+
 #ifdef ZC0301_DEBUG
 static unsigned short debug = ZC0301_DEBUG_LEVEL;
 module_param(debug, ushort, 0644);
@@ -115,8 +122,8 @@
 zc0301_request_buffers(struct zc0301_device* cam, u32 count,
                        enum zc0301_io_method io)
 {
-	struct v4l2_pix_format* p = &(cam->sensor->pix_format);
-	struct v4l2_rect* r = &(cam->sensor->cropcap.bounds);
+	struct v4l2_pix_format* p = &(cam->sensor.pix_format);
+	struct v4l2_rect* r = &(cam->sensor.cropcap.bounds);
 	const size_t imagesize = cam->module_param.force_munmap ||
 	                         io == IO_READ ?
 	                         (p->width * p->height * p->priv) / 8 :
@@ -332,9 +339,9 @@
 		(*f) = list_entry(cam->inqueue.next, struct zc0301_frame_t,
 		                  frame);
 
-	imagesize = (cam->sensor->pix_format.width *
-	             cam->sensor->pix_format.height *
-	             cam->sensor->pix_format.priv) / 8;
+	imagesize = (cam->sensor.pix_format.width *
+	             cam->sensor.pix_format.height *
+	             cam->sensor.pix_format.priv) / 8;
 
 	for (i = 0; i < urb->number_of_packets; i++) {
 		unsigned int len, status;
@@ -555,7 +562,7 @@
 
 static int zc0301_init(struct zc0301_device* cam)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_control ctrl;
 	struct v4l2_queryctrl *qctrl;
 	struct v4l2_rect* rect;
@@ -630,6 +637,7 @@
 	DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor);
 	video_set_drvdata(cam->v4ldev, NULL);
 	video_unregister_device(cam->v4ldev);
+	usb_put_dev(cam->usbdev);
 	kfree(cam->control_buffer);
 }
 
@@ -798,7 +806,8 @@
 		            (!list_empty(&cam->outqueue)) ||
 		            (cam->state & DEV_DISCONNECTED) ||
 		            (cam->state & DEV_MISCONFIGURED),
-		            ZC0301_FRAME_TIMEOUT );
+		            cam->module_param.frame_timeout *
+		            1000 * msecs_to_jiffies(1) );
 		if (timeout < 0) {
 			mutex_unlock(&cam->fileop_mutex);
 			return timeout;
@@ -1056,7 +1065,7 @@
 static int
 zc0301_vidioc_query_ctrl(struct zc0301_device* cam, void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_queryctrl qc;
 	u8 i;
 
@@ -1078,7 +1087,7 @@
 static int
 zc0301_vidioc_g_ctrl(struct zc0301_device* cam, void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_control ctrl;
 	int err = 0;
 	u8 i;
@@ -1110,7 +1119,7 @@
 static int
 zc0301_vidioc_s_ctrl(struct zc0301_device* cam, void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_control ctrl;
 	u8 i;
 	int err = 0;
@@ -1123,6 +1132,8 @@
 
 	for (i = 0; i < ARRAY_SIZE(s->qctrl); i++)
 		if (ctrl.id == s->qctrl[i].id) {
+			if (s->qctrl[i].flags & V4L2_CTRL_FLAG_DISABLED)
+				return -EINVAL;
 			if (ctrl.value < s->qctrl[i].minimum ||
 			    ctrl.value > s->qctrl[i].maximum)
 				return -ERANGE;
@@ -1142,7 +1153,7 @@
 static int
 zc0301_vidioc_cropcap(struct zc0301_device* cam, void __user * arg)
 {
-	struct v4l2_cropcap* cc = &(cam->sensor->cropcap);
+	struct v4l2_cropcap* cc = &(cam->sensor.cropcap);
 
 	cc->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
 	cc->pixelaspect.numerator = 1;
@@ -1158,7 +1169,7 @@
 static int
 zc0301_vidioc_g_crop(struct zc0301_device* cam, void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_crop crop = {
 		.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
 	};
@@ -1175,7 +1186,7 @@
 static int
 zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_crop crop;
 	struct v4l2_rect* rect;
 	struct v4l2_rect* bounds = &(s->cropcap.bounds);
@@ -1304,7 +1315,7 @@
 zc0301_vidioc_g_fmt(struct zc0301_device* cam, void __user * arg)
 {
 	struct v4l2_format format;
-	struct v4l2_pix_format* pfmt = &(cam->sensor->pix_format);
+	struct v4l2_pix_format* pfmt = &(cam->sensor.pix_format);
 
 	if (copy_from_user(&format, arg, sizeof(format)))
 		return -EFAULT;
@@ -1328,7 +1339,7 @@
 zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd,
                         void __user * arg)
 {
-	struct zc0301_sensor* s = cam->sensor;
+	struct zc0301_sensor* s = &cam->sensor;
 	struct v4l2_format format;
 	struct v4l2_pix_format* pix;
 	struct v4l2_pix_format* pfmt = &(s->pix_format);
@@ -1612,7 +1623,8 @@
 		            (!list_empty(&cam->outqueue)) ||
 		            (cam->state & DEV_DISCONNECTED) ||
 		            (cam->state & DEV_MISCONFIGURED),
-		            ZC0301_FRAME_TIMEOUT );
+		            cam->module_param.frame_timeout *
+		            1000 * msecs_to_jiffies(1) );
 		if (timeout < 0)
 			return timeout;
 		if (cam->state & DEV_DISCONNECTED)
@@ -1911,8 +1923,8 @@
 			break;
 	}
 
-	if (!err && cam->sensor)
-		DBG(2, "%s image sensor detected", cam->sensor->name);
+	if (!err)
+		DBG(2, "%s image sensor detected", cam->sensor.name);
 	else {
 		DBG(1, "No supported image sensor detected");
 		err = -ENODEV;
@@ -1950,6 +1962,7 @@
 	DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor);
 
 	cam->module_param.force_munmap = force_munmap[dev_nr];
+	cam->module_param.frame_timeout = frame_timeout[dev_nr];
 
 	dev_nr = (dev_nr < ZC0301_MAX_DEVICES-1) ? dev_nr+1 : 0;
 
@@ -1994,6 +2007,7 @@
 		cam->state |= DEV_DISCONNECTED;
 		wake_up_interruptible(&cam->wait_frame);
 		wake_up(&cam->wait_stream);
+		usb_get_dev(cam->usbdev);
 	} else {
 		cam->state |= DEV_DISCONNECTED;
 		zc0301_release_resources(cam);
diff --git a/drivers/usb/media/zc0301_pas202bcb.c b/drivers/usb/media/zc0301_pas202bcb.c
index 32b9b93..9d282a2 100644
--- a/drivers/usb/media/zc0301_pas202bcb.c
+++ b/drivers/usb/media/zc0301_pas202bcb.c
@@ -22,6 +22,14 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
  ***************************************************************************/
 
+/*
+   NOTE: Sensor controls are disabled for now, becouse changing them while
+         streaming sometimes results in out-of-sync video frames. We'll use
+         the default initialization, until we know how to stop and start video
+         in the chip. However, the image quality still looks good under various
+         light conditions.
+*/
+
 #include <linux/delay.h>
 #include "zc0301_sensor.h"
 
@@ -245,7 +253,7 @@
 			.maximum = 0x3fff,
 			.step = 0x0001,
 			.default_value = 0x01e5,
-			.flags = 0,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
 		},
 		{
 			.id = V4L2_CID_GAIN,
@@ -255,7 +263,17 @@
 			.maximum = 0x1f,
 			.step = 0x01,
 			.default_value = 0x0c,
-			.flags = 0,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
+		},
+		{
+			.id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
+			.type = V4L2_CTRL_TYPE_INTEGER,
+			.name = "DAC magnitude",
+			.minimum = 0x00,
+			.maximum = 0xff,
+			.step = 0x01,
+			.default_value = 0x00,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
 		},
 		{
 			.id = V4L2_CID_RED_BALANCE,
@@ -265,7 +283,7 @@
 			.maximum = 0x0f,
 			.step = 0x01,
 			.default_value = 0x01,
-			.flags = 0,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
 		},
 		{
 			.id = V4L2_CID_BLUE_BALANCE,
@@ -275,7 +293,7 @@
 			.maximum = 0x0f,
 			.step = 0x01,
 			.default_value = 0x05,
-			.flags = 0,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
 		},
 		{
 			.id = ZC0301_V4L2_CID_GREEN_BALANCE,
@@ -285,17 +303,7 @@
 			.maximum = 0x0f,
 			.step = 0x01,
 			.default_value = 0x00,
-			.flags = 0,
-		},
-		{
-			.id = ZC0301_V4L2_CID_DAC_MAGNITUDE,
-			.type = V4L2_CTRL_TYPE_INTEGER,
-			.name = "DAC magnitude",
-			.minimum = 0x00,
-			.maximum = 0xff,
-			.step = 0x01,
-			.default_value = 0x04,
-			.flags = 0,
+			.flags = V4L2_CTRL_FLAG_DISABLED,
 		},
 	},
 	.get_ctrl = &pas202bcb_get_ctrl,
diff --git a/drivers/usb/media/zc0301_sensor.h b/drivers/usb/media/zc0301_sensor.h
index 8890e32..e3cb6cc 100644
--- a/drivers/usb/media/zc0301_sensor.h
+++ b/drivers/usb/media/zc0301_sensor.h
@@ -43,9 +43,11 @@
 	NULL,                                                                 \
 };
 
+extern struct zc0301_device*
+zc0301_match_id(struct zc0301_device* cam, const struct usb_device_id *id);
+
 extern void
-zc0301_attach_sensor(struct zc0301_device* cam,
-                       struct zc0301_sensor* sensor);
+zc0301_attach_sensor(struct zc0301_device* cam, struct zc0301_sensor* sensor);
 
 #define ZC0301_USB_DEVICE(vend, prod, intclass)                               \
 	.match_flags = USB_DEVICE_ID_MATCH_DEVICE |                           \
@@ -56,7 +58,14 @@
 
 #define ZC0301_ID_TABLE                                                       \
 static const struct usb_device_id zc0301_id_table[] =  {                      \
+	{ ZC0301_USB_DEVICE(0x10fd, 0x8050, 0xff), }, /* TAS5130D */          \
+	{ ZC0301_USB_DEVICE(0x041e, 0x0417, 0xff), },                         \
+	{ ZC0301_USB_DEVICE(0x041e, 0x041e, 0xff), }, /* HV7131B */           \
+	{ ZC0301_USB_DEVICE(0x041e, 0x081c, 0xff), }, /* PAS106 */            \
+	{ ZC0301_USB_DEVICE(0x041e, 0x0834, 0xff), }, /* PAS106 */            \
+	{ ZC0301_USB_DEVICE(0x041e, 0x0835, 0xff), }, /* PAS106 */            \
 	{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202BCB */         \
+	{ ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), },                         \
 	{ }                                                                   \
 };
 
@@ -80,15 +89,11 @@
 	struct v4l2_cropcap cropcap;
 	struct v4l2_pix_format pix_format;
 
-	int (*init)(struct zc0301_device* cam);
-	int (*get_ctrl)(struct zc0301_device* cam,
-	                struct v4l2_control* ctrl);
-	int (*set_ctrl)(struct zc0301_device* cam,
+	int (*init)(struct zc0301_device*);
+	int (*get_ctrl)(struct zc0301_device*, struct v4l2_control* ctrl);
+	int (*set_ctrl)(struct zc0301_device*,
 	                const struct v4l2_control* ctrl);
-	int (*set_crop)(struct zc0301_device* cam,
-	                const struct v4l2_rect* rect);
-
-	const struct usb_device* usbdev;
+	int (*set_crop)(struct zc0301_device*, const struct v4l2_rect* rect);
 
 	/* Private */
 	struct v4l2_queryctrl _qctrl[ZC0301_MAX_CTRLS];