ab8500_charger: Handle gpadc errors

Gracefully handle gpadc conversion errors.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com>
Reviewed-by: Johan BJORNSTEDT <johan.bjornstedt@stericsson.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 24c4ae5..126b325 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -160,6 +160,7 @@
 	int charger_voltage;
 	int cv_active;
 	bool wd_expired;
+	int charger_current;
 };
 
 struct ab8500_charger_event_flags {
@@ -2358,6 +2359,7 @@
 	union power_supply_propval *val)
 {
 	struct ab8500_charger *di;
+	int ret;
 
 	di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
 
@@ -2379,7 +2381,10 @@
 		val->intval = di->ac.charger_connected;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di);
+		ret = ab8500_charger_get_ac_voltage(di);
+		if (ret >= 0)
+			di->ac.charger_voltage = ret;
+		/* On error, use previous value */
 		val->intval = di->ac.charger_voltage * 1000;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2391,7 +2396,10 @@
 		val->intval = di->ac.cv_active;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
-		val->intval = ab8500_charger_get_ac_current(di) * 1000;
+		ret = ab8500_charger_get_ac_current(di);
+		if (ret >= 0)
+			di->ac.charger_current = ret;
+		val->intval = di->ac.charger_current * 1000;
 		break;
 	default:
 		return -EINVAL;
@@ -2418,6 +2426,7 @@
 	union power_supply_propval *val)
 {
 	struct ab8500_charger *di;
+	int ret;
 
 	di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
 
@@ -2441,7 +2450,9 @@
 		val->intval = di->usb.charger_connected;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
-		di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di);
+		ret = ab8500_charger_get_vbus_voltage(di);
+		if (ret >= 0)
+			di->usb.charger_voltage = ret;
 		val->intval = di->usb.charger_voltage * 1000;
 		break;
 	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
@@ -2453,7 +2464,10 @@
 		val->intval = di->usb.cv_active;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
-		val->intval = ab8500_charger_get_usb_current(di) * 1000;
+		ret = ab8500_charger_get_usb_current(di);
+		if (ret >= 0)
+			di->usb.charger_current = ret;
+		val->intval = di->usb.charger_current * 1000;
 		break;
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 		/*