| /** |
| * core.h - DesignWare USB3 DRD Core Header |
| * |
| * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com |
| * |
| * Authors: Felipe Balbi <balbi@ti.com>, |
| * Sebastian Andrzej Siewior <bigeasy@linutronix.de> |
| * |
| * This program is free software: you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 of |
| * the License as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef __DRIVERS_USB_DWC3_CORE_H |
| #define __DRIVERS_USB_DWC3_CORE_H |
| |
| #include <linux/device.h> |
| #include <linux/spinlock.h> |
| #include <linux/ioport.h> |
| #include <linux/list.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/mm.h> |
| #include <linux/debugfs.h> |
| #include <linux/workqueue.h> |
| #include <linux/wait.h> |
| |
| |
| #include <linux/usb/ch9.h> |
| #include <linux/usb/gadget.h> |
| #include <linux/usb/otg.h> |
| #include <linux/ulpi/interface.h> |
| |
| #include <linux/phy/phy.h> |
| |
| #define DWC3_MSG_MAX 500 |
| |
| /* Global constants */ |
| #define DWC3_ZLP_BUF_SIZE 1024 /* size of a superspeed bulk */ |
| #define DWC3_EP0_BOUNCE_SIZE 512 |
| #define DWC3_ENDPOINTS_NUM 32 |
| #define DWC3_XHCI_RESOURCES_NUM 2 |
| |
| #define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ |
| #define DWC3_EVENT_BUFFERS_SIZE 4096 |
| #define DWC3_EVENT_TYPE_MASK 0xfe |
| |
| #define DWC3_EVENT_TYPE_DEV 0 |
| #define DWC3_EVENT_TYPE_CARKIT 3 |
| #define DWC3_EVENT_TYPE_I2C 4 |
| |
| #define DWC3_DEVICE_EVENT_DISCONNECT 0 |
| #define DWC3_DEVICE_EVENT_RESET 1 |
| #define DWC3_DEVICE_EVENT_CONNECT_DONE 2 |
| #define DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE 3 |
| #define DWC3_DEVICE_EVENT_WAKEUP 4 |
| #define DWC3_DEVICE_EVENT_HIBER_REQ 5 |
| #define DWC3_DEVICE_EVENT_EOPF 6 |
| /* For version 2.30a and above */ |
| #define DWC3_DEVICE_EVENT_SUSPEND 6 |
| #define DWC3_DEVICE_EVENT_SOF 7 |
| #define DWC3_DEVICE_EVENT_ERRATIC_ERROR 9 |
| #define DWC3_DEVICE_EVENT_CMD_CMPL 10 |
| #define DWC3_DEVICE_EVENT_OVERFLOW 11 |
| |
| #define DWC3_GEVNTCOUNT_MASK 0xfffc |
| #define DWC3_GEVNTCOUNT_EHB (1 << 31) |
| #define DWC3_GSNPSID_MASK 0xffff0000 |
| #define DWC3_GSNPSREV_MASK 0xffff |
| |
| /* DWC3 registers memory space boundries */ |
| #define DWC3_XHCI_REGS_START 0x0 |
| #define DWC3_XHCI_REGS_END 0x7fff |
| #define DWC3_GLOBALS_REGS_START 0xc100 |
| #define DWC3_GLOBALS_REGS_END 0xc6ff |
| #define DWC3_DEVICE_REGS_START 0xc700 |
| #define DWC3_DEVICE_REGS_END 0xcbff |
| #define DWC3_OTG_REGS_START 0xcc00 |
| #define DWC3_OTG_REGS_END 0xccff |
| |
| /* Global Registers */ |
| #define DWC3_GSBUSCFG0 0xc100 |
| #define DWC3_GSBUSCFG1 0xc104 |
| #define DWC3_GTXTHRCFG 0xc108 |
| #define DWC3_GRXTHRCFG 0xc10c |
| #define DWC3_GCTL 0xc110 |
| #define DWC3_GEVTEN 0xc114 |
| #define DWC3_GSTS 0xc118 |
| #define DWC3_GUCTL1 0xc11c |
| #define DWC3_GSNPSID 0xc120 |
| #define DWC3_GGPIO 0xc124 |
| #define DWC3_GUID 0xc128 |
| #define DWC3_GUCTL 0xc12c |
| #define DWC3_GBUSERRADDR0 0xc130 |
| #define DWC3_GBUSERRADDR1 0xc134 |
| #define DWC3_GPRTBIMAP0 0xc138 |
| #define DWC3_GPRTBIMAP1 0xc13c |
| #define DWC3_GHWPARAMS0 0xc140 |
| #define DWC3_GHWPARAMS1 0xc144 |
| #define DWC3_GHWPARAMS2 0xc148 |
| #define DWC3_GHWPARAMS3 0xc14c |
| #define DWC3_GHWPARAMS4 0xc150 |
| #define DWC3_GHWPARAMS5 0xc154 |
| #define DWC3_GHWPARAMS6 0xc158 |
| #define DWC3_GHWPARAMS7 0xc15c |
| #define DWC3_GDBGFIFOSPACE 0xc160 |
| #define DWC3_GDBGLTSSM 0xc164 |
| #define DWC3_GPRTBIMAP_HS0 0xc180 |
| #define DWC3_GPRTBIMAP_HS1 0xc184 |
| #define DWC3_GPRTBIMAP_FS0 0xc188 |
| #define DWC3_GPRTBIMAP_FS1 0xc18c |
| #define DWC3_GUCTL2 0xc19c |
| |
| #define DWC3_VER_NUMBER 0xc1a0 |
| #define DWC3_VER_TYPE 0xc1a4 |
| |
| #define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04)) |
| #define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04)) |
| |
| #define DWC3_GUSB2PHYACC(n) (0xc280 + (n * 0x04)) |
| |
| #define DWC3_GUSB3PIPECTL(n) (0xc2c0 + (n * 0x04)) |
| |
| #define DWC3_GTXFIFOSIZ(n) (0xc300 + (n * 0x04)) |
| #define DWC3_GRXFIFOSIZ(n) (0xc380 + (n * 0x04)) |
| |
| #define DWC3_GEVNTADRLO(n) (0xc400 + (n * 0x10)) |
| #define DWC3_GEVNTADRHI(n) (0xc404 + (n * 0x10)) |
| #define DWC3_GEVNTSIZ(n) (0xc408 + (n * 0x10)) |
| #define DWC3_GEVNTCOUNT(n) (0xc40c + (n * 0x10)) |
| |
| #define DWC3_GHWPARAMS8 0xc600 |
| #define DWC3_GFLADJ 0xc630 |
| |
| /* Device Registers */ |
| #define DWC3_DCFG 0xc700 |
| #define DWC3_DCTL 0xc704 |
| #define DWC3_DEVTEN 0xc708 |
| #define DWC3_DSTS 0xc70c |
| #define DWC3_DGCMDPAR 0xc710 |
| #define DWC3_DGCMD 0xc714 |
| #define DWC3_DALEPENA 0xc720 |
| |
| #define DWC3_DEP_BASE(n) (0xc800 + (n * 0x10)) |
| #define DWC3_DEPCMDPAR2 0x00 |
| #define DWC3_DEPCMDPAR1 0x04 |
| #define DWC3_DEPCMDPAR0 0x08 |
| #define DWC3_DEPCMD 0x0c |
| |
| #define DWC3_DEV_IMOD(n) (0xca00 + (n * 0x4)) |
| |
| /* OTG Registers */ |
| #define DWC3_OCFG 0xcc00 |
| #define DWC3_OCTL 0xcc04 |
| #define DWC3_OEVT 0xcc08 |
| #define DWC3_OEVTEN 0xcc0C |
| #define DWC3_OSTS 0xcc10 |
| |
| /* Bit fields */ |
| |
| /* Global SoC Bus Configuration Register 1 */ |
| #define DWC3_GSBUSCFG1_PIPETRANSLIMIT_MASK (0x0f << 8) |
| #define DWC3_GSBUSCFG1_PIPETRANSLIMIT(n) ((n) << 8) |
| |
| /* Global Debug Queue/FIFO Space Available Register */ |
| #define DWC3_GDBGFIFOSPACE_NUM(n) ((n) & 0x1f) |
| #define DWC3_GDBGFIFOSPACE_TYPE(n) (((n) << 5) & 0x1e0) |
| #define DWC3_GDBGFIFOSPACE_SPACE_AVAILABLE(n) (((n) >> 16) & 0xffff) |
| |
| #define DWC3_TXFIFOQ 0 |
| #define DWC3_RXFIFOQ 1 |
| #define DWC3_TXREQQ 2 |
| #define DWC3_RXREQQ 3 |
| #define DWC3_RXINFOQ 4 |
| #define DWC3_PSTATQ 5 |
| #define DWC3_DESCFETCHQ 6 |
| #define DWC3_EVENTQ 7 |
| #define DWC3_AUXEVENTQ 8 |
| |
| /* Global RX Threshold Configuration Register */ |
| #define DWC3_GRXTHRCFG_MAXRXBURSTSIZE(n) (((n) & 0x1f) << 19) |
| #define DWC3_GRXTHRCFG_RXPKTCNT(n) (((n) & 0xf) << 24) |
| #define DWC3_GRXTHRCFG_PKTCNTSEL (1 << 29) |
| |
| /* Global Configuration Register */ |
| #define DWC3_GCTL_PWRDNSCALE(n) ((n) << 19) |
| #define DWC3_GCTL_PWRDNSCALEMASK (0xFFF80000) |
| #define DWC3_GCTL_U2RSTECN (1 << 16) |
| #define DWC3_GCTL_SOFITPSYNC (1 << 10) |
| #define DWC3_GCTL_U2EXIT_LFPS (1 << 2) |
| #define DWC3_GCTL_RAMCLKSEL(x) (((x) & DWC3_GCTL_CLK_MASK) << 6) |
| #define DWC3_GCTL_CLK_BUS (0) |
| #define DWC3_GCTL_CLK_PIPE (1) |
| #define DWC3_GCTL_CLK_PIPEHALF (2) |
| #define DWC3_GCTL_CLK_MASK (3) |
| |
| #define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12) |
| #define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12) |
| #define DWC3_GCTL_PRTCAP_HOST 1 |
| #define DWC3_GCTL_PRTCAP_DEVICE 2 |
| #define DWC3_GCTL_PRTCAP_OTG 3 |
| |
| #define DWC3_GCTL_CORESOFTRESET (1 << 11) |
| #define DWC3_GCTL_SOFITPSYNC (1 << 10) |
| #define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) |
| #define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) |
| #define DWC3_GCTL_DISSCRAMBLE (1 << 3) |
| #define DWC3_GCTL_U2EXIT_LFPS (1 << 2) |
| #define DWC3_GCTL_GBLHIBERNATIONEN (1 << 1) |
| #define DWC3_GCTL_DSBLCLKGTNG (1 << 0) |
| |
| /* Global User Control Register */ |
| #define DWC3_GUCTL_REFCLKPER (0x3FF << 22) |
| |
| /* Global Debug LTSSM Register */ |
| #define DWC3_GDBGLTSSM_LINKSTATE_MASK (0xF << 22) |
| |
| /* Global User Control 1 Register */ |
| #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW (1 << 24) |
| |
| /* Global User Control 2 Register */ |
| #define DWC3_GUCTL2_ENABLE_EP_CACHE_EVICT (1 << 12) |
| |
| /* Global USB2 PHY Configuration Register */ |
| #define DWC3_GUSB2PHYCFG_PHYSOFTRST (1 << 31) |
| #define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) |
| #define DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS (1 << 30) |
| |
| #define DWC3_GUSB2PHYCFG_SUSPHY (1 << 6) |
| #define DWC3_GUSB2PHYCFG_ULPI_UTMI (1 << 4) |
| #define DWC3_GUSB2PHYCFG_ENBLSLPM (1 << 8) |
| #define DWC3_GUSB2PHYCFG_PHYIF(n) (n << 3) |
| #define DWC3_GUSB2PHYCFG_PHYIF_MASK DWC3_GUSB2PHYCFG_PHYIF(1) |
| #define DWC3_GUSB2PHYCFG_USBTRDTIM(n) (n << 10) |
| #define DWC3_GUSB2PHYCFG_USBTRDTIM_MASK DWC3_GUSB2PHYCFG_USBTRDTIM(0xf) |
| #define USBTRDTIM_UTMI_8_BIT 9 |
| #define USBTRDTIM_UTMI_16_BIT 5 |
| #define UTMI_PHYIF_16_BIT 1 |
| #define UTMI_PHYIF_8_BIT 0 |
| |
| /* Global USB2 PHY Vendor Control Register */ |
| #define DWC3_GUSB2PHYACC_NEWREGREQ (1 << 25) |
| #define DWC3_GUSB2PHYACC_BUSY (1 << 23) |
| #define DWC3_GUSB2PHYACC_WRITE (1 << 22) |
| #define DWC3_GUSB2PHYACC_ADDR(n) (n << 16) |
| #define DWC3_GUSB2PHYACC_EXTEND_ADDR(n) (n << 8) |
| #define DWC3_GUSB2PHYACC_DATA(n) (n & 0xff) |
| |
| /* Global USB3 PIPE Control Register */ |
| #define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31) |
| #define DWC3_GUSB3PIPECTL_U2SSINP3OK (1 << 29) |
| #define DWC3_GUSB3PIPECTL_DISRXDETINP3 (1 << 28) |
| #define DWC3_GUSB3PIPECTL_UX_EXIT_PX (1 << 27) |
| #define DWC3_GUSB3PIPECTL_REQP1P2P3 (1 << 24) |
| #define DWC3_GUSB3PIPECTL_DISRXDETU3 (1 << 22) |
| #define DWC3_GUSB3PIPECTL_DEP1P2P3(n) ((n) << 19) |
| #define DWC3_GUSB3PIPECTL_DEP1P2P3_MASK DWC3_GUSB3PIPECTL_DEP1P2P3(7) |
| #define DWC3_GUSB3PIPECTL_DEP1P2P3_EN DWC3_GUSB3PIPECTL_DEP1P2P3(1) |
| #define DWC3_GUSB3PIPECTL_DEPOCHANGE (1 << 18) |
| #define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17) |
| #define DWC3_GUSB3PIPECTL_LFPSFILT (1 << 9) |
| #define DWC3_GUSB3PIPECTL_RX_DETOPOLL (1 << 8) |
| #define DWC3_GUSB3PIPECTL_TX_DEEPH_MASK DWC3_GUSB3PIPECTL_TX_DEEPH(3) |
| #define DWC3_GUSB3PIPECTL_TX_DEEPH(n) ((n) << 1) |
| #define DWC3_GUSB3PIPECTL_DELAYP1TRANS (1 << 18) |
| #define DWC3_GUSB3PIPECTL_ELASTIC_BUF_MODE (1 << 0) |
| |
| /* Global TX Fifo Size Register */ |
| #define DWC31_GTXFIFOSIZ_TXFRAMNUM BIT(15) /* DWC_usb31 only */ |
| #define DWC31_GTXFIFOSIZ_TXFDEF(n) ((n) & 0x7fff) /* DWC_usb31 only */ |
| #define DWC3_GTXFIFOSIZ_TXFDEF(n) ((n) & 0xffff) |
| #define DWC3_GTXFIFOSIZ_TXFSTADDR(n) ((n) & 0xffff0000) |
| |
| /* Global Event Size Registers */ |
| #define DWC3_GEVNTSIZ_INTMASK (1 << 31) |
| #define DWC3_GEVNTSIZ_SIZE(n) ((n) & 0xffff) |
| |
| /* Global HWPARAMS0 Register */ |
| #define DWC3_GHWPARAMS0_MODE(n) ((n) & 0x3) |
| #define DWC3_GHWPARAMS0_MODE_GADGET 0 |
| #define DWC3_GHWPARAMS0_MODE_HOST 1 |
| #define DWC3_GHWPARAMS0_MODE_DRD 2 |
| #define DWC3_GHWPARAMS0_MBUS_TYPE(n) (((n) >> 3) & 0x7) |
| #define DWC3_GHWPARAMS0_SBUS_TYPE(n) (((n) >> 6) & 0x3) |
| #define DWC3_GHWPARAMS0_MDWIDTH(n) (((n) >> 8) & 0xff) |
| #define DWC3_GHWPARAMS0_SDWIDTH(n) (((n) >> 16) & 0xff) |
| #define DWC3_GHWPARAMS0_AWIDTH(n) (((n) >> 24) & 0xff) |
| |
| /* Global HWPARAMS1 Register */ |
| #define DWC3_GHWPARAMS1_EN_PWROPT(n) (((n) & (3 << 24)) >> 24) |
| #define DWC3_GHWPARAMS1_EN_PWROPT_NO 0 |
| #define DWC3_GHWPARAMS1_EN_PWROPT_CLK 1 |
| #define DWC3_GHWPARAMS1_EN_PWROPT_HIB 2 |
| #define DWC3_GHWPARAMS1_PWROPT(n) ((n) << 24) |
| #define DWC3_GHWPARAMS1_PWROPT_MASK DWC3_GHWPARAMS1_PWROPT(3) |
| |
| /* Global HWPARAMS3 Register */ |
| #define DWC3_GHWPARAMS3_SSPHY_IFC(n) ((n) & 3) |
| #define DWC3_GHWPARAMS3_SSPHY_IFC_DIS 0 |
| #define DWC3_GHWPARAMS3_SSPHY_IFC_GEN1 1 |
| #define DWC3_GHWPARAMS3_SSPHY_IFC_GEN2 2 /* DWC_usb31 only */ |
| #define DWC3_GHWPARAMS3_HSPHY_IFC(n) (((n) & (3 << 2)) >> 2) |
| #define DWC3_GHWPARAMS3_HSPHY_IFC_DIS 0 |
| #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI 1 |
| #define DWC3_GHWPARAMS3_HSPHY_IFC_ULPI 2 |
| #define DWC3_GHWPARAMS3_HSPHY_IFC_UTMI_ULPI 3 |
| #define DWC3_GHWPARAMS3_FSPHY_IFC(n) (((n) & (3 << 4)) >> 4) |
| #define DWC3_GHWPARAMS3_FSPHY_IFC_DIS 0 |
| #define DWC3_GHWPARAMS3_FSPHY_IFC_ENA 1 |
| |
| /* Global HWPARAMS4 Register */ |
| #define DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(n) (((n) & (0x0f << 13)) >> 13) |
| #define DWC3_MAX_HIBER_SCRATCHBUFS 15 |
| |
| /* Global HWPARAMS6 Register */ |
| #define DWC3_GHWPARAMS6_EN_FPGA (1 << 7) |
| |
| /* Global HWPARAMS7 Register */ |
| #define DWC3_GHWPARAMS7_RAM1_DEPTH(n) ((n) & 0xffff) |
| #define DWC3_GHWPARAMS7_RAM2_DEPTH(n) (((n) >> 16) & 0xffff) |
| |
| /* Global Frame Length Adjustment Register */ |
| #define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) |
| #define DWC3_GFLADJ_30MHZ_MASK 0x3f |
| |
| #define DWC3_GFLADJ_REFCLK_240MHZDECR_PLS1 (1 << 31) |
| #define DWC3_GFLADJ_REFCLK_240MHZ_DECR (0x7F << 24) |
| #define DWC3_GFLADJ_REFCLK_LPM_SEL (1 << 23) |
| #define DWC3_GFLADJ_REFCLK_FLADJ (0x3FFF << 8) |
| |
| /* Global User Control Register 2 */ |
| #define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14) |
| #define DWC3_GUCTL2_HP_TIMER(n) ((n) << 21) |
| #define DWC3_GUCTL2_HP_TIMER_MASK DWC3_GUCTL2_HP_TIMER(0x1f) |
| #define DWC3_GUCTL2_LC_TIMER (1 << 19) |
| |
| /* Device Configuration Register */ |
| #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) |
| #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) |
| |
| #define DWC3_DCFG_SPEED_MASK (7 << 0) |
| #define DWC3_DCFG_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ |
| #define DWC3_DCFG_SUPERSPEED (4 << 0) |
| #define DWC3_DCFG_HIGHSPEED (0 << 0) |
| #define DWC3_DCFG_FULLSPEED (1 << 0) |
| #define DWC3_DCFG_LOWSPEED (2 << 0) |
| |
| #define DWC3_DCFG_NUMP_SHIFT 17 |
| #define DWC3_DCFG_NUMP(n) (((n) >> DWC3_DCFG_NUMP_SHIFT) & 0x1f) |
| #define DWC3_DCFG_NUMP_MASK (0x1f << DWC3_DCFG_NUMP_SHIFT) |
| #define DWC3_DCFG_LPM_CAP (1 << 22) |
| |
| /* Device Control Register */ |
| #define DWC3_DCTL_RUN_STOP (1 << 31) |
| #define DWC3_DCTL_CSFTRST (1 << 30) |
| #define DWC3_DCTL_LSFTRST (1 << 29) |
| |
| #define DWC3_DCTL_HIRD_THRES_MASK (0x1f << 24) |
| #define DWC3_DCTL_HIRD_THRES(n) ((n) << 24) |
| |
| #define DWC3_DCTL_APPL1RES (1 << 23) |
| |
| /* These apply for core versions 1.87a and earlier */ |
| #define DWC3_DCTL_TRGTULST_MASK (0x0f << 17) |
| #define DWC3_DCTL_TRGTULST(n) ((n) << 17) |
| #define DWC3_DCTL_TRGTULST_U2 (DWC3_DCTL_TRGTULST(2)) |
| #define DWC3_DCTL_TRGTULST_U3 (DWC3_DCTL_TRGTULST(3)) |
| #define DWC3_DCTL_TRGTULST_SS_DIS (DWC3_DCTL_TRGTULST(4)) |
| #define DWC3_DCTL_TRGTULST_RX_DET (DWC3_DCTL_TRGTULST(5)) |
| #define DWC3_DCTL_TRGTULST_SS_INACT (DWC3_DCTL_TRGTULST(6)) |
| |
| /* These apply for core versions 1.94a and later */ |
| #define DWC3_DCTL_LPM_ERRATA_MASK DWC3_DCTL_LPM_ERRATA(0xf) |
| #define DWC3_DCTL_LPM_ERRATA(n) ((n) << 20) |
| |
| #define DWC3_DCTL_KEEP_CONNECT (1 << 19) |
| #define DWC3_DCTL_L1_HIBER_EN (1 << 18) |
| #define DWC3_DCTL_CRS (1 << 17) |
| #define DWC3_DCTL_CSS (1 << 16) |
| |
| #define DWC3_DCTL_INITU2ENA (1 << 12) |
| #define DWC3_DCTL_ACCEPTU2ENA (1 << 11) |
| #define DWC3_DCTL_INITU1ENA (1 << 10) |
| #define DWC3_DCTL_ACCEPTU1ENA (1 << 9) |
| #define DWC3_DCTL_TSTCTRL_MASK (0xf << 1) |
| |
| #define DWC3_DCTL_ULSTCHNGREQ_MASK (0x0f << 5) |
| #define DWC3_DCTL_ULSTCHNGREQ(n) (((n) << 5) & DWC3_DCTL_ULSTCHNGREQ_MASK) |
| |
| #define DWC3_DCTL_ULSTCHNG_NO_ACTION (DWC3_DCTL_ULSTCHNGREQ(0)) |
| #define DWC3_DCTL_ULSTCHNG_SS_DISABLED (DWC3_DCTL_ULSTCHNGREQ(4)) |
| #define DWC3_DCTL_ULSTCHNG_RX_DETECT (DWC3_DCTL_ULSTCHNGREQ(5)) |
| #define DWC3_DCTL_ULSTCHNG_SS_INACTIVE (DWC3_DCTL_ULSTCHNGREQ(6)) |
| #define DWC3_DCTL_ULSTCHNG_RECOVERY (DWC3_DCTL_ULSTCHNGREQ(8)) |
| #define DWC3_DCTL_ULSTCHNG_COMPLIANCE (DWC3_DCTL_ULSTCHNGREQ(10)) |
| #define DWC3_DCTL_ULSTCHNG_LOOPBACK (DWC3_DCTL_ULSTCHNGREQ(11)) |
| |
| /* Device Event Enable Register */ |
| #define DWC3_DEVTEN_VNDRDEVTSTRCVEDEN (1 << 12) |
| #define DWC3_DEVTEN_EVNTOVERFLOWEN (1 << 11) |
| #define DWC3_DEVTEN_CMDCMPLTEN (1 << 10) |
| #define DWC3_DEVTEN_ERRTICERREN (1 << 9) |
| #define DWC3_DEVTEN_SOFEN (1 << 7) |
| #define DWC3_DEVTEN_EOPFEN (1 << 6) |
| /* For version 2.30a and above*/ |
| #define DWC3_DEVTEN_SUSPEND (1 << 6) |
| #define DWC3_DEVTEN_HIBERNATIONREQEVTEN (1 << 5) |
| #define DWC3_DEVTEN_WKUPEVTEN (1 << 4) |
| #define DWC3_DEVTEN_ULSTCNGEN (1 << 3) |
| #define DWC3_DEVTEN_CONNECTDONEEN (1 << 2) |
| #define DWC3_DEVTEN_USBRSTEN (1 << 1) |
| #define DWC3_DEVTEN_DISCONNEVTEN (1 << 0) |
| |
| /* Device Status Register */ |
| #define DWC3_DSTS_DCNRD (1 << 29) |
| |
| /* This applies for core versions 1.87a and earlier */ |
| #define DWC3_DSTS_PWRUPREQ (1 << 24) |
| |
| /* These apply for core versions 1.94a and later */ |
| #define DWC3_DSTS_RSS (1 << 25) |
| #define DWC3_DSTS_SSS (1 << 24) |
| |
| #define DWC3_DSTS_COREIDLE (1 << 23) |
| #define DWC3_DSTS_DEVCTRLHLT (1 << 22) |
| |
| #define DWC3_DSTS_USBLNKST_MASK (0x0f << 18) |
| #define DWC3_DSTS_USBLNKST(n) (((n) & DWC3_DSTS_USBLNKST_MASK) >> 18) |
| |
| #define DWC3_DSTS_RXFIFOEMPTY (1 << 17) |
| |
| #define DWC3_DSTS_SOFFN_MASK (0x3fff << 3) |
| #define DWC3_DSTS_SOFFN(n) (((n) & DWC3_DSTS_SOFFN_MASK) >> 3) |
| |
| #define DWC3_DSTS_CONNECTSPD (7 << 0) |
| |
| #define DWC3_DSTS_SUPERSPEED_PLUS (5 << 0) /* DWC_usb31 only */ |
| #define DWC3_DSTS_SUPERSPEED (4 << 0) |
| #define DWC3_DSTS_HIGHSPEED (0 << 0) |
| #define DWC3_DSTS_FULLSPEED (1 << 0) |
| #define DWC3_DSTS_LOWSPEED (2 << 0) |
| |
| /* Device Generic Command Register */ |
| #define DWC3_DGCMD_SET_LMP 0x01 |
| #define DWC3_DGCMD_SET_PERIODIC_PAR 0x02 |
| #define DWC3_DGCMD_XMIT_FUNCTION 0x03 |
| #define DWC3_DGCMD_XMIT_DEV 0x07 |
| |
| /* These apply for core versions 1.94a and later */ |
| #define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO 0x04 |
| #define DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI 0x05 |
| |
| #define DWC3_DGCMD_SELECTED_FIFO_FLUSH 0x09 |
| #define DWC3_DGCMD_ALL_FIFO_FLUSH 0x0a |
| #define DWC3_DGCMD_SET_ENDPOINT_NRDY 0x0c |
| #define DWC3_DGCMD_RUN_SOC_BUS_LOOPBACK 0x10 |
| |
| #define DWC3_DGCMD_STATUS(n) (((n) >> 12) & 0x0F) |
| #define DWC3_DGCMD_CMDACT (1 << 10) |
| #define DWC3_DGCMD_CMDIOC (1 << 8) |
| |
| /* Device Generic Command Parameter Register */ |
| #define DWC3_DGCMDPAR_FORCE_LINKPM_ACCEPT (1 << 0) |
| #define DWC3_DGCMDPAR_FIFO_NUM(n) ((n) << 0) |
| #define DWC3_DGCMDPAR_RX_FIFO (0 << 5) |
| #define DWC3_DGCMDPAR_TX_FIFO (1 << 5) |
| #define DWC3_DGCMDPAR_LOOPBACK_DIS (0 << 0) |
| #define DWC3_DGCMDPAR_LOOPBACK_ENA (1 << 0) |
| |
| /* Device Endpoint Command Register */ |
| #define DWC3_DEPCMD_PARAM_SHIFT 16 |
| #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) |
| #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) |
| #define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F) |
| #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) |
| #define DWC3_DEPCMD_CLEARPENDIN (1 << 11) |
| #define DWC3_DEPCMD_CMDACT (1 << 10) |
| #define DWC3_DEPCMD_CMDIOC (1 << 8) |
| |
| #define DWC3_DEPCMD_DEPSTARTCFG (0x09 << 0) |
| #define DWC3_DEPCMD_ENDTRANSFER (0x08 << 0) |
| #define DWC3_DEPCMD_UPDATETRANSFER (0x07 << 0) |
| #define DWC3_DEPCMD_STARTTRANSFER (0x06 << 0) |
| #define DWC3_DEPCMD_CLEARSTALL (0x05 << 0) |
| #define DWC3_DEPCMD_SETSTALL (0x04 << 0) |
| /* This applies for core versions 1.90a and earlier */ |
| #define DWC3_DEPCMD_GETSEQNUMBER (0x03 << 0) |
| /* This applies for core versions 1.94a and later */ |
| #define DWC3_DEPCMD_GETEPSTATE (0x03 << 0) |
| #define DWC3_DEPCMD_SETTRANSFRESOURCE (0x02 << 0) |
| #define DWC3_DEPCMD_SETEPCONFIG (0x01 << 0) |
| |
| #define DWC3_DEPCMD_CMD(x) ((x) & 0xf) |
| |
| /* The EP number goes 0..31 so ep0 is always out and ep1 is always in */ |
| #define DWC3_DALEPENA_EP(n) (1 << n) |
| |
| #define DWC3_DEPCMD_TYPE_CONTROL 0 |
| #define DWC3_DEPCMD_TYPE_ISOC 1 |
| #define DWC3_DEPCMD_TYPE_BULK 2 |
| #define DWC3_DEPCMD_TYPE_INTR 3 |
| |
| #define DWC3_DEV_IMOD_COUNT_SHIFT 16 |
| #define DWC3_DEV_IMOD_COUNT_MASK (0xffff << 16) |
| #define DWC3_DEV_IMOD_INTERVAL_SHIFT 0 |
| #define DWC3_DEV_IMOD_INTERVAL_MASK (0xffff << 0) |
| |
| #define DWC_CTRL_COUNT 10 |
| #define NUM_LOG_PAGES 12 |
| |
| /* Structures */ |
| |
| struct dwc3_trb; |
| |
| /** |
| * struct dwc3_event_buffer - Software event buffer representation |
| * @buf: _THE_ buffer |
| * @length: size of this buffer |
| * @lpos: event offset |
| * @count: cache of last read event count register |
| * @flags: flags related to this event buffer |
| * @dma: dma_addr_t |
| * @dwc: pointer to DWC controller |
| */ |
| struct dwc3_event_buffer { |
| void *buf; |
| unsigned length; |
| unsigned int lpos; |
| unsigned int count; |
| unsigned int flags; |
| |
| #define DWC3_EVENT_PENDING BIT(0) |
| |
| dma_addr_t dma; |
| |
| struct dwc3 *dwc; |
| }; |
| |
| struct dwc3_gadget_events { |
| unsigned int disconnect; |
| unsigned int reset; |
| unsigned int connect; |
| unsigned int wakeup; |
| unsigned int link_status_change; |
| unsigned int eopf; |
| unsigned int suspend; |
| unsigned int sof; |
| unsigned int erratic_error; |
| unsigned int overflow; |
| unsigned int vendor_dev_test_lmp; |
| unsigned int cmdcmplt; |
| unsigned int unknown_event; |
| }; |
| |
| struct dwc3_ep_events { |
| unsigned int xfercomplete; |
| unsigned int xfernotready; |
| unsigned int control_data; |
| unsigned int control_status; |
| unsigned int xferinprogress; |
| unsigned int rxtxfifoevent; |
| unsigned int streamevent; |
| unsigned int epcmdcomplete; |
| unsigned int unknown_event; |
| unsigned int total; |
| }; |
| |
| #define DWC3_EP_FLAG_STALLED (1 << 0) |
| #define DWC3_EP_FLAG_WEDGED (1 << 1) |
| |
| #define DWC3_EP_DIRECTION_TX true |
| #define DWC3_EP_DIRECTION_RX false |
| |
| #define DWC3_TRB_NUM 256 |
| |
| /** |
| * struct dwc3_ep - device side endpoint representation |
| * @endpoint: usb endpoint |
| * @pending_list: list of pending requests for this endpoint |
| * @started_list: list of started requests on this endpoint |
| * @lock: spinlock for endpoint request queue traversal |
| * @regs: pointer to first endpoint register |
| * @trb_pool: array of transaction buffers |
| * @trb_pool_dma: dma address of @trb_pool |
| * @num_trbs: num of trbs in the trb dma pool |
| * @trb_enqueue: enqueue 'pointer' into TRB array |
| * @trb_dequeue: dequeue 'pointer' into TRB array |
| * @desc: usb_endpoint_descriptor pointer |
| * @dwc: pointer to DWC controller |
| * @saved_state: ep state saved during hibernation |
| * @flags: endpoint flags (wedged, stalled, ...) |
| * @number: endpoint number (1 - 15) |
| * @type: set to bmAttributes & USB_ENDPOINT_XFERTYPE_MASK |
| * @resource_index: Resource transfer index |
| * @interval: the interval on which the ISOC transfer is started |
| * @allocated_requests: number of requests allocated |
| * @queued_requests: number of requests queued for transfer |
| * @name: a human readable name e.g. ep1out-bulk |
| * @direction: true for TX, false for RX |
| * @stream_capable: true when streams are enabled |
| * @dbg_ep_events: different events counter for endpoint |
| * @dbg_ep_events_diff: differential events counter for endpoint |
| * @dbg_ep_events_ts: timestamp for previous event counters |
| * @fifo_depth: allocated TXFIFO depth |
| */ |
| struct dwc3_ep { |
| struct usb_ep endpoint; |
| struct list_head pending_list; |
| struct list_head started_list; |
| |
| spinlock_t lock; |
| void __iomem *regs; |
| |
| struct dwc3_trb *trb_pool; |
| dma_addr_t trb_pool_dma; |
| u32 num_trbs; |
| const struct usb_ss_ep_comp_descriptor *comp_desc; |
| struct dwc3 *dwc; |
| |
| u32 saved_state; |
| unsigned flags; |
| #define DWC3_EP_ENABLED (1 << 0) |
| #define DWC3_EP_STALL (1 << 1) |
| #define DWC3_EP_WEDGE (1 << 2) |
| #define DWC3_EP_BUSY (1 << 4) |
| #define DWC3_EP_PENDING_REQUEST (1 << 5) |
| #define DWC3_EP_MISSED_ISOC (1 << 6) |
| #define DWC3_EP_TRANSFER_STARTED (1 << 8) |
| |
| /* This last one is specific to EP0 */ |
| #define DWC3_EP0_DIR_IN (1 << 31) |
| |
| /* |
| * IMPORTANT: we *know* we have 256 TRBs in our @trb_pool, so we will |
| * use a u8 type here. If anybody decides to increase number of TRBs to |
| * anything larger than 256 - I can't see why people would want to do |
| * this though - then this type needs to be changed. |
| * |
| * By using u8 types we ensure that our % operator when incrementing |
| * enqueue and dequeue get optimized away by the compiler. |
| */ |
| u8 trb_enqueue; |
| u8 trb_dequeue; |
| |
| u8 number; |
| u8 type; |
| u8 resource_index; |
| u32 allocated_requests; |
| u32 queued_requests; |
| u32 interval; |
| |
| char name[20]; |
| |
| unsigned direction:1; |
| unsigned stream_capable:1; |
| struct dwc3_ep_events dbg_ep_events; |
| struct dwc3_ep_events dbg_ep_events_diff; |
| struct timespec dbg_ep_events_ts; |
| int fifo_depth; |
| }; |
| |
| enum dwc3_phy { |
| DWC3_PHY_UNKNOWN = 0, |
| DWC3_PHY_USB3, |
| DWC3_PHY_USB2, |
| }; |
| |
| enum dwc3_ep0_next { |
| DWC3_EP0_UNKNOWN = 0, |
| DWC3_EP0_COMPLETE, |
| DWC3_EP0_NRDY_DATA, |
| DWC3_EP0_NRDY_STATUS, |
| }; |
| |
| enum dwc3_ep0_state { |
| EP0_UNCONNECTED = 0, |
| EP0_SETUP_PHASE, |
| EP0_DATA_PHASE, |
| EP0_STATUS_PHASE, |
| }; |
| |
| enum dwc3_link_state { |
| /* In SuperSpeed */ |
| DWC3_LINK_STATE_U0 = 0x00, /* in HS, means ON */ |
| DWC3_LINK_STATE_U1 = 0x01, |
| DWC3_LINK_STATE_U2 = 0x02, /* in HS, means SLEEP */ |
| DWC3_LINK_STATE_U3 = 0x03, /* in HS, means SUSPEND */ |
| DWC3_LINK_STATE_SS_DIS = 0x04, |
| DWC3_LINK_STATE_RX_DET = 0x05, /* in HS, means Early Suspend */ |
| DWC3_LINK_STATE_SS_INACT = 0x06, |
| DWC3_LINK_STATE_POLL = 0x07, |
| DWC3_LINK_STATE_RECOV = 0x08, |
| DWC3_LINK_STATE_HRESET = 0x09, |
| DWC3_LINK_STATE_CMPLY = 0x0a, |
| DWC3_LINK_STATE_LPBK = 0x0b, |
| DWC3_LINK_STATE_RESET = 0x0e, |
| DWC3_LINK_STATE_RESUME = 0x0f, |
| DWC3_LINK_STATE_MASK = 0x0f, |
| }; |
| |
| /* TRB Length, PCM and Status */ |
| #define DWC3_TRB_SIZE_MASK (0x00ffffff) |
| #define DWC3_TRB_SIZE_LENGTH(n) ((n) & DWC3_TRB_SIZE_MASK) |
| #define DWC3_TRB_SIZE_PCM1(n) (((n) & 0x03) << 24) |
| #define DWC3_TRB_SIZE_TRBSTS(n) (((n) & (0x0f << 28)) >> 28) |
| |
| #define DWC3_TRBSTS_OK 0 |
| #define DWC3_TRBSTS_MISSED_ISOC 1 |
| #define DWC3_TRBSTS_SETUP_PENDING 2 |
| #define DWC3_TRB_STS_XFER_IN_PROG 4 |
| |
| /* TRB Control */ |
| #define DWC3_TRB_CTRL_HWO (1 << 0) |
| #define DWC3_TRB_CTRL_LST (1 << 1) |
| #define DWC3_TRB_CTRL_CHN (1 << 2) |
| #define DWC3_TRB_CTRL_CSP (1 << 3) |
| #define DWC3_TRB_CTRL_TRBCTL(n) (((n) & 0x3f) << 4) |
| #define DWC3_TRB_CTRL_ISP_IMI (1 << 10) |
| #define DWC3_TRB_CTRL_IOC (1 << 11) |
| #define DWC3_TRB_CTRL_SID_SOFN(n) (((n) & 0xffff) << 14) |
| |
| #define DWC3_TRBCTL_TYPE(n) ((n) & (0x3f << 4)) |
| #define DWC3_TRBCTL_NORMAL DWC3_TRB_CTRL_TRBCTL(1) |
| #define DWC3_TRBCTL_CONTROL_SETUP DWC3_TRB_CTRL_TRBCTL(2) |
| #define DWC3_TRBCTL_CONTROL_STATUS2 DWC3_TRB_CTRL_TRBCTL(3) |
| #define DWC3_TRBCTL_CONTROL_STATUS3 DWC3_TRB_CTRL_TRBCTL(4) |
| #define DWC3_TRBCTL_CONTROL_DATA DWC3_TRB_CTRL_TRBCTL(5) |
| #define DWC3_TRBCTL_ISOCHRONOUS_FIRST DWC3_TRB_CTRL_TRBCTL(6) |
| #define DWC3_TRBCTL_ISOCHRONOUS DWC3_TRB_CTRL_TRBCTL(7) |
| #define DWC3_TRBCTL_LINK_TRB DWC3_TRB_CTRL_TRBCTL(8) |
| |
| /** |
| * struct dwc3_trb - transfer request block (hw format) |
| * @bpl: DW0-3 |
| * @bph: DW4-7 |
| * @size: DW8-B |
| * @trl: DWC-F |
| */ |
| struct dwc3_trb { |
| u32 bpl; |
| u32 bph; |
| u32 size; |
| u32 ctrl; |
| } __packed; |
| |
| /** |
| * dwc3_hwparams - copy of HWPARAMS registers |
| * @hwparams0 - GHWPARAMS0 |
| * @hwparams1 - GHWPARAMS1 |
| * @hwparams2 - GHWPARAMS2 |
| * @hwparams3 - GHWPARAMS3 |
| * @hwparams4 - GHWPARAMS4 |
| * @hwparams5 - GHWPARAMS5 |
| * @hwparams6 - GHWPARAMS6 |
| * @hwparams7 - GHWPARAMS7 |
| * @hwparams8 - GHWPARAMS8 |
| */ |
| struct dwc3_hwparams { |
| u32 hwparams0; |
| u32 hwparams1; |
| u32 hwparams2; |
| u32 hwparams3; |
| u32 hwparams4; |
| u32 hwparams5; |
| u32 hwparams6; |
| u32 hwparams7; |
| u32 hwparams8; |
| }; |
| |
| /* HWPARAMS0 */ |
| #define DWC3_MODE(n) ((n) & 0x7) |
| |
| #define DWC3_MDWIDTH(n) (((n) & 0xff00) >> 8) |
| |
| /* HWPARAMS1 */ |
| #define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15) |
| |
| /* HWPARAMS3 */ |
| #define DWC3_NUM_IN_EPS_MASK (0x1f << 18) |
| #define DWC3_NUM_EPS_MASK (0x3f << 12) |
| #define DWC3_NUM_EPS(p) (((p)->hwparams3 & \ |
| (DWC3_NUM_EPS_MASK)) >> 12) |
| #define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \ |
| (DWC3_NUM_IN_EPS_MASK)) >> 18) |
| |
| /* HWPARAMS7 */ |
| #define DWC3_RAM1_DEPTH(n) ((n) & 0xffff) |
| |
| /** |
| * struct dwc3_request - representation of a transfer request |
| * @request: struct usb_request to be transferred |
| * @list: a list_head used for request queueing |
| * @dep: struct dwc3_ep owning this request |
| * @sg: pointer to first incomplete sg |
| * @num_pending_sgs: counter to pending sgs |
| * @first_trb_index: index to first trb used by this request |
| * @epnum: endpoint number to which this request refers |
| * @trb: pointer to struct dwc3_trb |
| * @trb_dma: DMA address of @trb |
| * @direction: IN or OUT direction flag |
| * @mapped: true when request has been dma-mapped |
| * @queued: true when request has been queued to HW |
| */ |
| struct dwc3_request { |
| struct usb_request request; |
| struct list_head list; |
| struct dwc3_ep *dep; |
| struct scatterlist *sg; |
| |
| unsigned num_pending_sgs; |
| u8 first_trb_index; |
| u8 epnum; |
| struct dwc3_trb *trb; |
| dma_addr_t trb_dma; |
| |
| unsigned direction:1; |
| unsigned mapped:1; |
| unsigned started:1; |
| }; |
| |
| /* |
| * struct dwc3_scratchpad_array - hibernation scratchpad array |
| * (format defined by hw) |
| */ |
| struct dwc3_scratchpad_array { |
| __le64 dma_adr[DWC3_MAX_HIBER_SCRATCHBUFS]; |
| }; |
| |
| #define DWC3_CONTROLLER_ERROR_EVENT 0 |
| #define DWC3_CONTROLLER_RESET_EVENT 1 |
| #define DWC3_CONTROLLER_POST_RESET_EVENT 2 |
| #define DWC3_CORE_PM_SUSPEND_EVENT 3 |
| #define DWC3_CORE_PM_RESUME_EVENT 4 |
| #define DWC3_CONTROLLER_CONNDONE_EVENT 5 |
| #define DWC3_CONTROLLER_NOTIFY_OTG_EVENT 6 |
| #define DWC3_CONTROLLER_SET_CURRENT_DRAW_EVENT 7 |
| #define DWC3_CONTROLLER_RESTART_USB_SESSION 8 |
| #define DWC3_CONTROLLER_NOTIFY_DISABLE_UPDXFER 9 |
| |
| /* USB GSI event buffer related notification */ |
| #define DWC3_GSI_EVT_BUF_ALLOC 10 |
| #define DWC3_GSI_EVT_BUF_SETUP 11 |
| #define DWC3_GSI_EVT_BUF_CLEANUP 12 |
| #define DWC3_GSI_EVT_BUF_FREE 13 |
| |
| #define MAX_INTR_STATS 10 |
| |
| /** |
| * struct dwc3 - representation of our controller |
| * @ctrl_req: usb control request which is used for ep0 |
| * @ep0_trb: trb which is used for the ctrl_req |
| * @ep0_bounce: bounce buffer for ep0 |
| * @zlp_buf: used when request->zero is set |
| * @setup_buf: used while precessing STD USB requests |
| * @ctrl_req_addr: dma address of ctrl_req |
| * @ep0_trb: dma address of ep0_trb |
| * @ep0_usb_req: dummy req used while handling STD USB requests |
| * @ep0_bounce_addr: dma address of ep0_bounce |
| * @scratch_addr: dma address of scratchbuf |
| * @lock: for synchronizing |
| * @dev: pointer to our struct device |
| * @xhci: pointer to our xHCI child |
| * @event_buffer_list: a list of event buffers |
| * @gadget: device side representation of the peripheral controller |
| * @gadget_driver: pointer to the gadget driver |
| * @regs: base address for our registers |
| * @regs_size: address space size |
| * @fladj: frame length adjustment |
| * @irq_gadget: peripheral controller's IRQ number |
| * @reg_phys: physical base address of dwc3 core register address space |
| * @nr_scratch: number of scratch buffers |
| * @u1u2: only used on revisions <1.83a for workaround |
| * @maximum_speed: maximum speed to operate as requested by sw |
| * @max_hw_supp_speed: maximum speed supported by hw design |
| * @revision: revision register contents |
| * @dr_mode: requested mode of operation |
| * @hsphy_mode: UTMI phy mode, one of following: |
| * - USBPHY_INTERFACE_MODE_UTMI |
| * - USBPHY_INTERFACE_MODE_UTMIW |
| * @usb2_phy: pointer to USB2 PHY |
| * @usb3_phy: pointer to USB3 PHY |
| * @usb2_generic_phy: pointer to USB2 PHY |
| * @usb3_generic_phy: pointer to USB3 PHY |
| * @ulpi: pointer to ulpi interface |
| * @dcfg: saved contents of DCFG register |
| * @gctl: saved contents of GCTL register |
| * @isoch_delay: wValue from Set Isochronous Delay request; |
| * @u2sel: parameter from Set SEL request. |
| * @u2pel: parameter from Set SEL request. |
| * @u1sel: parameter from Set SEL request. |
| * @u1pel: parameter from Set SEL request. |
| * @num_out_eps: number of out endpoints |
| * @num_in_eps: number of in endpoints |
| * @ep0_next_event: hold the next expected event |
| * @ep0state: state of endpoint zero |
| * @link_state: link state |
| * @speed: device speed (super, high, full, low) |
| * @mem: points to start of memory which is used for this struct. |
| * @hwparams: copy of hwparams registers |
| * @root: debugfs root folder pointer |
| * @regset: debugfs pointer to regdump file |
| * @test_mode: true when we're entering a USB test mode |
| * @test_mode_nr: test feature selector |
| * @lpm_nyet_threshold: LPM NYET response threshold |
| * @hird_threshold: HIRD threshold |
| * @hsphy_interface: "utmi" or "ulpi" |
| * @connected: true when we're connected to a host, false otherwise |
| * @delayed_status: true when gadget driver asks for delayed status |
| * @ep0_bounced: true when we used bounce buffer |
| * @ep0_expect_in: true when we expect a DATA IN transfer |
| * @has_hibernation: true when dwc3 was configured with Hibernation |
| * @sysdev_is_parent: true when dwc3 device has a parent driver |
| * @has_lpm_erratum: true when core was configured with LPM Erratum. Note that |
| * there's now way for software to detect this in runtime. |
| * @is_utmi_l1_suspend: the core asserts output signal |
| * 0 - utmi_sleep_n |
| * 1 - utmi_l1_suspend_n |
| * @is_fpga: true when we are using the FPGA board |
| * @pending_events: true when we have pending IRQs to be handled |
| * @needs_fifo_resize: not all users might want fifo resizing, flag it |
| * @pullups_connected: true when Run/Stop bit is set |
| * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround |
| * @start_config_issued: true when StartConfig command has been issued |
| * @three_stage_setup: set if we perform a three phase setup |
| * @usb3_lpm_capable: set if hadrware supports Link Power Management |
| * @disable_scramble_quirk: set if we enable the disable scramble quirk |
| * @u2exit_lfps_quirk: set if we enable u2exit lfps quirk |
| * @u2ss_inp3_quirk: set if we enable P3 OK for U2/SS Inactive quirk |
| * @req_p1p2p3_quirk: set if we enable request p1p2p3 quirk |
| * @del_p1p2p3_quirk: set if we enable delay p1p2p3 quirk |
| * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk |
| * @lfps_filter_quirk: set if we enable LFPS filter quirk |
| * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk |
| * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy |
| * @dis_u2_susphy_quirk: set if we disable usb2 suspend phy |
| * @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG, |
| * disabling the suspend signal to the PHY. |
| * @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists |
| * in GUSB2PHYCFG, specify that USB2 PHY doesn't |
| * provide a free-running PHY clock. |
| * @dis_del_phy_power_chg_quirk: set if we disable delay phy power |
| * change quirk. |
| * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk |
| * @tx_de_emphasis: Tx de-emphasis value |
| * 0 - -6dB de-emphasis |
| * 1 - -3.5dB de-emphasis |
| * 2 - No de-emphasis |
| * 3 - Reserved |
| * @is_drd: device supports dual-role or not |
| * @err_evt_seen: previous event in queue was erratic error |
| * @usb3_u1u2_disable: if true, disable U1U2 low power modes in Superspeed mode |
| * @usb1_l1_disable: if true, disable L1 low power modes in Highspeed mode |
| * @in_lpm: indicates if controller is in low power mode (no clocks) |
| * @tx_fifo_size: Available RAM size for TX fifo allocation |
| * @irq: irq number |
| * @bh: tasklet which handles the interrupt |
| * @irq_cnt: total irq count |
| * @bh_completion_time: time taken for taklet completion |
| * @bh_handled_evt_cnt: no. of events handled by tasklet per interrupt |
| * @bh_dbg_index: index for capturing bh_completion_time and bh_handled_evt_cnt |
| * @wait_linkstate: waitqueue for waiting LINK to move into required state |
| * @vbus_draw: current to be drawn from USB |
| * @index: dwc3 instance's number |
| * @dwc_ipc_log_ctxt: dwc3 ipc log context |
| * @last_fifo_depth: total TXFIFO depth of all enabled USB IN/INT endpoints |
| * @imod_interval: set the interrupt moderation interval in 250ns |
| * increments or 0 to disable. |
| * @create_reg_debugfs: create debugfs entry to allow dwc3 register dump |
| * @xhci_imod_value: imod value to use with xhci |
| * @core_id: usb core id to differentiate different controller |
| */ |
| struct dwc3 { |
| struct usb_ctrlrequest *ctrl_req; |
| struct dwc3_trb *ep0_trb; |
| void *ep0_bounce; |
| void *zlp_buf; |
| void *scratchbuf; |
| u8 *setup_buf; |
| dma_addr_t ctrl_req_addr; |
| dma_addr_t ep0_trb_addr; |
| dma_addr_t ep0_bounce_addr; |
| dma_addr_t scratch_addr; |
| struct dwc3_request ep0_usb_req; |
| |
| /* device lock */ |
| spinlock_t lock; |
| |
| struct device *dev; |
| struct device *sysdev; |
| |
| struct platform_device *xhci; |
| struct resource xhci_resources[DWC3_XHCI_RESOURCES_NUM]; |
| |
| struct dwc3_event_buffer *ev_buf; |
| struct dwc3_ep *eps[DWC3_ENDPOINTS_NUM]; |
| |
| struct usb_gadget gadget; |
| struct usb_gadget_driver *gadget_driver; |
| |
| struct usb_phy *usb2_phy; |
| struct usb_phy *usb3_phy; |
| |
| struct phy *usb2_generic_phy; |
| struct phy *usb3_generic_phy; |
| |
| struct ulpi *ulpi; |
| |
| void __iomem *regs; |
| size_t regs_size; |
| phys_addr_t reg_phys; |
| |
| enum usb_dr_mode dr_mode; |
| enum usb_phy_interface hsphy_mode; |
| |
| u32 fladj; |
| u32 irq_gadget; |
| u32 nr_scratch; |
| u32 u1u2; |
| u32 maximum_speed; |
| u32 max_hw_supp_speed; |
| |
| /* |
| * All 3.1 IP version constants are greater than the 3.0 IP |
| * version constants. This works for most version checks in |
| * dwc3. However, in the future, this may not apply as |
| * features may be developed on newer versions of the 3.0 IP |
| * that are not in the 3.1 IP. |
| */ |
| u32 revision; |
| |
| #define DWC3_REVISION_173A 0x5533173a |
| #define DWC3_REVISION_175A 0x5533175a |
| #define DWC3_REVISION_180A 0x5533180a |
| #define DWC3_REVISION_183A 0x5533183a |
| #define DWC3_REVISION_185A 0x5533185a |
| #define DWC3_REVISION_187A 0x5533187a |
| #define DWC3_REVISION_188A 0x5533188a |
| #define DWC3_REVISION_190A 0x5533190a |
| #define DWC3_REVISION_194A 0x5533194a |
| #define DWC3_REVISION_200A 0x5533200a |
| #define DWC3_REVISION_202A 0x5533202a |
| #define DWC3_REVISION_210A 0x5533210a |
| #define DWC3_REVISION_220A 0x5533220a |
| #define DWC3_REVISION_230A 0x5533230a |
| #define DWC3_REVISION_240A 0x5533240a |
| #define DWC3_REVISION_250A 0x5533250a |
| #define DWC3_REVISION_260A 0x5533260a |
| #define DWC3_REVISION_270A 0x5533270a |
| #define DWC3_REVISION_280A 0x5533280a |
| #define DWC3_REVISION_290A 0x5533290a |
| #define DWC3_REVISION_300A 0x5533300a |
| #define DWC3_REVISION_310A 0x5533310a |
| #define DWC3_REVISION_320A 0x5533320a |
| |
| /* |
| * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really |
| * just so dwc31 revisions are always larger than dwc3. |
| */ |
| #define DWC3_REVISION_IS_DWC31 0x80000000 |
| #define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_DWC31) |
| #define DWC3_USB31_REVISION_120A (0x3132302a | DWC3_REVISION_IS_DWC31) |
| |
| enum dwc3_ep0_next ep0_next_event; |
| enum dwc3_ep0_state ep0state; |
| enum dwc3_link_state link_state; |
| |
| u16 isoch_delay; |
| u16 u2sel; |
| u16 u2pel; |
| u8 u1sel; |
| u8 u1pel; |
| |
| u8 speed; |
| |
| u8 num_out_eps; |
| u8 num_in_eps; |
| |
| void *mem; |
| |
| struct dwc3_hwparams hwparams; |
| struct dentry *root; |
| struct debugfs_regset32 *regset; |
| |
| u8 test_mode; |
| u8 test_mode_nr; |
| u8 lpm_nyet_threshold; |
| u8 hird_threshold; |
| |
| const char *hsphy_interface; |
| |
| unsigned connected:1; |
| void (*notify_event)(struct dwc3 *, unsigned int, unsigned int); |
| struct work_struct wakeup_work; |
| |
| unsigned delayed_status:1; |
| unsigned ep0_bounced:1; |
| unsigned ep0_expect_in:1; |
| unsigned has_hibernation:1; |
| unsigned sysdev_is_parent:1; |
| unsigned has_lpm_erratum:1; |
| unsigned is_utmi_l1_suspend:1; |
| unsigned is_fpga:1; |
| unsigned pending_events:1; |
| unsigned needs_fifo_resize:1; |
| unsigned pullups_connected:1; |
| unsigned setup_packet_pending:1; |
| unsigned three_stage_setup:1; |
| unsigned usb3_lpm_capable:1; |
| |
| unsigned disable_scramble_quirk:1; |
| unsigned u2exit_lfps_quirk:1; |
| unsigned u2ss_inp3_quirk:1; |
| unsigned req_p1p2p3_quirk:1; |
| unsigned del_p1p2p3_quirk:1; |
| unsigned del_phy_power_chg_quirk:1; |
| unsigned lfps_filter_quirk:1; |
| unsigned rx_detect_poll_quirk:1; |
| unsigned dis_u3_susphy_quirk:1; |
| unsigned dis_u2_susphy_quirk:1; |
| unsigned dis_enblslpm_quirk:1; |
| unsigned dis_rxdet_inp3_quirk:1; |
| unsigned dis_u2_freeclk_exists_quirk:1; |
| unsigned dis_del_phy_power_chg_quirk:1; |
| |
| unsigned tx_de_emphasis_quirk:1; |
| unsigned tx_de_emphasis:2; |
| unsigned is_drd:1; |
| /* Indicate if the gadget was powered by the otg driver */ |
| unsigned vbus_active:1; |
| /* Indicate if software connect was issued by the usb_gadget_driver */ |
| unsigned softconnect:1; |
| unsigned err_evt_seen:1; |
| /* Indicate if need to disable controller internal clkgating */ |
| unsigned disable_clk_gating:1; |
| unsigned enable_bus_suspend:1; |
| unsigned usb3_u1u2_disable:1; |
| unsigned usb2_l1_disable:1; |
| |
| atomic_t in_lpm; |
| int tx_fifo_size; |
| bool b_suspend; |
| unsigned int vbus_draw; |
| |
| u16 imod_interval; |
| |
| struct workqueue_struct *dwc_wq; |
| struct work_struct bh_work; |
| |
| /* IRQ timing statistics */ |
| int irq; |
| unsigned long ep_cmd_timeout_cnt; |
| unsigned long irq_cnt; |
| unsigned int bh_completion_time[MAX_INTR_STATS]; |
| unsigned int bh_handled_evt_cnt[MAX_INTR_STATS]; |
| unsigned int bh_dbg_index; |
| ktime_t irq_start_time[MAX_INTR_STATS]; |
| ktime_t t_pwr_evt_irq; |
| unsigned int irq_completion_time[MAX_INTR_STATS]; |
| unsigned int irq_event_count[MAX_INTR_STATS]; |
| unsigned int irq_dbg_index; |
| |
| unsigned long l1_remote_wakeup_cnt; |
| |
| wait_queue_head_t wait_linkstate; |
| unsigned int index; |
| void *dwc_ipc_log_ctxt; |
| int last_fifo_depth; |
| struct dwc3_gadget_events dbg_gadget_events; |
| bool create_reg_debugfs; |
| u32 xhci_imod_value; |
| int core_id; |
| }; |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| /* -------------------------------------------------------------------------- */ |
| |
| struct dwc3_event_type { |
| u32 is_devspec:1; |
| u32 type:7; |
| u32 reserved8_31:24; |
| } __packed; |
| |
| #define DWC3_DEPEVT_XFERCOMPLETE 0x01 |
| #define DWC3_DEPEVT_XFERINPROGRESS 0x02 |
| #define DWC3_DEPEVT_XFERNOTREADY 0x03 |
| #define DWC3_DEPEVT_RXTXFIFOEVT 0x04 |
| #define DWC3_DEPEVT_STREAMEVT 0x06 |
| #define DWC3_DEPEVT_EPCMDCMPLT 0x07 |
| |
| /** |
| * struct dwc3_event_depvt - Device Endpoint Events |
| * @one_bit: indicates this is an endpoint event (not used) |
| * @endpoint_number: number of the endpoint |
| * @endpoint_event: The event we have: |
| * 0x00 - Reserved |
| * 0x01 - XferComplete |
| * 0x02 - XferInProgress |
| * 0x03 - XferNotReady |
| * 0x04 - RxTxFifoEvt (IN->Underrun, OUT->Overrun) |
| * 0x05 - Reserved |
| * 0x06 - StreamEvt |
| * 0x07 - EPCmdCmplt |
| * @reserved11_10: Reserved, don't use. |
| * @status: Indicates the status of the event. Refer to databook for |
| * more information. |
| * @parameters: Parameters of the current event. Refer to databook for |
| * more information. |
| */ |
| struct dwc3_event_depevt { |
| u32 one_bit:1; |
| u32 endpoint_number:5; |
| u32 endpoint_event:4; |
| u32 reserved11_10:2; |
| u32 status:4; |
| |
| /* Within XferNotReady */ |
| #define DEPEVT_STATUS_TRANSFER_ACTIVE (1 << 3) |
| |
| /* Within XferComplete */ |
| #define DEPEVT_STATUS_BUSERR (1 << 0) |
| #define DEPEVT_STATUS_SHORT (1 << 1) |
| #define DEPEVT_STATUS_IOC (1 << 2) |
| #define DEPEVT_STATUS_LST (1 << 3) |
| |
| /* Stream event only */ |
| #define DEPEVT_STREAMEVT_FOUND 1 |
| #define DEPEVT_STREAMEVT_NOTFOUND 2 |
| |
| /* Control-only Status */ |
| #define DEPEVT_STATUS_CONTROL_DATA 1 |
| #define DEPEVT_STATUS_CONTROL_STATUS 2 |
| |
| /* In response to Start Transfer */ |
| #define DEPEVT_TRANSFER_NO_RESOURCE 1 |
| #define DEPEVT_TRANSFER_BUS_EXPIRY 2 |
| |
| u32 parameters:16; |
| } __packed; |
| |
| /** |
| * struct dwc3_event_devt - Device Events |
| * @one_bit: indicates this is a non-endpoint event (not used) |
| * @device_event: indicates it's a device event. Should read as 0x00 |
| * @type: indicates the type of device event. |
| * 0 - DisconnEvt |
| * 1 - USBRst |
| * 2 - ConnectDone |
| * 3 - ULStChng |
| * 4 - WkUpEvt |
| * 5 - Reserved |
| * 6 - EOPF |
| * 7 - SOF |
| * 8 - Reserved |
| * 9 - ErrticErr |
| * 10 - CmdCmplt |
| * 11 - EvntOverflow |
| * 12 - VndrDevTstRcved |
| * @reserved15_12: Reserved, not used |
| * @event_info: Information about this event |
| * @reserved31_25: Reserved, not used |
| */ |
| struct dwc3_event_devt { |
| u32 one_bit:1; |
| u32 device_event:7; |
| u32 type:4; |
| u32 reserved15_12:4; |
| u32 event_info:9; |
| u32 reserved31_25:7; |
| } __packed; |
| |
| /** |
| * struct dwc3_event_gevt - Other Core Events |
| * @one_bit: indicates this is a non-endpoint event (not used) |
| * @device_event: indicates it's (0x03) Carkit or (0x04) I2C event. |
| * @phy_port_number: self-explanatory |
| * @reserved31_12: Reserved, not used. |
| */ |
| struct dwc3_event_gevt { |
| u32 one_bit:1; |
| u32 device_event:7; |
| u32 phy_port_number:4; |
| u32 reserved31_12:20; |
| } __packed; |
| |
| /** |
| * union dwc3_event - representation of Event Buffer contents |
| * @raw: raw 32-bit event |
| * @type: the type of the event |
| * @depevt: Device Endpoint Event |
| * @devt: Device Event |
| * @gevt: Global Event |
| */ |
| union dwc3_event { |
| u32 raw; |
| struct dwc3_event_type type; |
| struct dwc3_event_depevt depevt; |
| struct dwc3_event_devt devt; |
| struct dwc3_event_gevt gevt; |
| }; |
| |
| /** |
| * struct dwc3_gadget_ep_cmd_params - representation of endpoint command |
| * parameters |
| * @param2: third parameter |
| * @param1: second parameter |
| * @param0: first parameter |
| */ |
| struct dwc3_gadget_ep_cmd_params { |
| u32 param2; |
| u32 param1; |
| u32 param0; |
| }; |
| |
| /* |
| * DWC3 Features to be used as Driver Data |
| */ |
| |
| #define DWC3_HAS_PERIPHERAL BIT(0) |
| #define DWC3_HAS_XHCI BIT(1) |
| #define DWC3_HAS_OTG BIT(3) |
| |
| /* prototypes */ |
| void dwc3_set_mode(struct dwc3 *dwc, u32 mode); |
| u32 dwc3_core_fifo_space(struct dwc3_ep *dep, u8 type); |
| int dwc3_gadget_resize_tx_fifos(struct dwc3 *dwc, struct dwc3_ep *dep); |
| |
| /* check whether we are on the DWC_usb3 core */ |
| static inline bool dwc3_is_usb3(struct dwc3 *dwc) |
| { |
| return !(dwc->revision & DWC3_REVISION_IS_DWC31); |
| } |
| |
| /* check whether we are on the DWC_usb31 core */ |
| static inline bool dwc3_is_usb31(struct dwc3 *dwc) |
| { |
| return !!(dwc->revision & DWC3_REVISION_IS_DWC31); |
| } |
| |
| bool dwc3_has_imod(struct dwc3 *dwc); |
| |
| #if IS_ENABLED(CONFIG_USB_DWC3_HOST) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) |
| int dwc3_host_init(struct dwc3 *dwc); |
| void dwc3_host_exit(struct dwc3 *dwc); |
| #else |
| static inline int dwc3_host_init(struct dwc3 *dwc) |
| { return 0; } |
| static inline void dwc3_host_exit(struct dwc3 *dwc) |
| { } |
| #endif |
| |
| #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) |
| int dwc3_gadget_init(struct dwc3 *dwc); |
| void dwc3_gadget_exit(struct dwc3 *dwc); |
| void dwc3_gadget_restart(struct dwc3 *dwc); |
| int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); |
| int dwc3_gadget_get_link_state(struct dwc3 *dwc); |
| int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); |
| int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, |
| struct dwc3_gadget_ep_cmd_params *params); |
| int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param); |
| void dwc3_gadget_enable_irq(struct dwc3 *dwc); |
| void dwc3_gadget_disable_irq(struct dwc3 *dwc); |
| #else |
| static inline int dwc3_gadget_init(struct dwc3 *dwc) |
| { return 0; } |
| static inline void dwc3_gadget_exit(struct dwc3 *dwc) |
| { } |
| static inline void dwc3_gadget_restart(struct dwc3 *dwc) |
| { } |
| static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) |
| { return 0; } |
| static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc) |
| { return 0; } |
| static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc, |
| enum dwc3_link_state state) |
| { return 0; } |
| |
| static inline int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd, |
| struct dwc3_gadget_ep_cmd_params *params) |
| { return 0; } |
| static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, |
| int cmd, u32 param) |
| { return 0; } |
| static inline void dwc3_gadget_enable_irq(struct dwc3 *dwc) |
| { } |
| static inline void dwc3_gadget_disable_irq(struct dwc3 *dwc) |
| { } |
| #endif |
| |
| /* power management interface */ |
| #if !IS_ENABLED(CONFIG_USB_DWC3_HOST) |
| int dwc3_gadget_suspend(struct dwc3 *dwc); |
| int dwc3_gadget_resume(struct dwc3 *dwc); |
| void dwc3_gadget_process_pending_events(struct dwc3 *dwc); |
| #else |
| static inline int dwc3_gadget_suspend(struct dwc3 *dwc) |
| { |
| return 0; |
| } |
| |
| static inline int dwc3_gadget_resume(struct dwc3 *dwc) |
| { |
| return 0; |
| } |
| |
| static inline void dwc3_gadget_process_pending_events(struct dwc3 *dwc) |
| { |
| } |
| #endif /* !IS_ENABLED(CONFIG_USB_DWC3_HOST) */ |
| |
| #if IS_ENABLED(CONFIG_USB_DWC3_ULPI) |
| int dwc3_ulpi_init(struct dwc3 *dwc); |
| void dwc3_ulpi_exit(struct dwc3 *dwc); |
| #else |
| static inline int dwc3_ulpi_init(struct dwc3 *dwc) |
| { return 0; } |
| static inline void dwc3_ulpi_exit(struct dwc3 *dwc) |
| { } |
| #endif |
| |
| int dwc3_core_init(struct dwc3 *dwc); |
| int dwc3_core_pre_init(struct dwc3 *dwc); |
| void dwc3_post_host_reset_core_init(struct dwc3 *dwc); |
| int dwc3_event_buffers_setup(struct dwc3 *dwc); |
| void dwc3_usb3_phy_suspend(struct dwc3 *dwc, int suspend); |
| |
| extern void dwc3_set_notifier( |
| void (*notify)(struct dwc3 *dwc3, unsigned int event, |
| unsigned int value)); |
| extern int dwc3_notify_event(struct dwc3 *dwc3, unsigned int event, |
| unsigned int value); |
| |
| #endif /* __DRIVERS_USB_DWC3_CORE_H */ |