| /* |
| * Copyright (c) 2003-2012 Broadcom Corporation |
| * All Rights Reserved |
| * |
| * This software is available to you under a choice of one of two |
| * licenses. You may choose to be licensed under the terms of the GNU |
| * General Public License (GPL) Version 2, available from the file |
| * COPYING in the main directory of this source tree, or the Broadcom |
| * license below: |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * THIS SOFTWARE IS PROVIDED BY BROADCOM ``AS IS'' AND ANY EXPRESS OR |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL BROADCOM OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/msi.h> |
| #include <linux/mm.h> |
| #include <linux/irq.h> |
| #include <linux/irqdesc.h> |
| #include <linux/console.h> |
| |
| #include <asm/io.h> |
| |
| #include <asm/netlogic/interrupt.h> |
| #include <asm/netlogic/haldefs.h> |
| #include <asm/netlogic/common.h> |
| #include <asm/netlogic/mips-extns.h> |
| |
| #include <asm/netlogic/xlp-hal/iomap.h> |
| #include <asm/netlogic/xlp-hal/xlp.h> |
| #include <asm/netlogic/xlp-hal/pic.h> |
| #include <asm/netlogic/xlp-hal/pcibus.h> |
| #include <asm/netlogic/xlp-hal/bridge.h> |
| |
| #define XLP_MSIVEC_PER_LINK 32 |
| #define XLP_MSIXVEC_TOTAL (cpu_is_xlp9xx() ? 128 : 32) |
| #define XLP_MSIXVEC_PER_LINK (cpu_is_xlp9xx() ? 32 : 8) |
| |
| /* 128 MSI irqs per node, mapped starting at NLM_MSI_VEC_BASE */ |
| static inline int nlm_link_msiirq(int link, int msivec) |
| { |
| return NLM_MSI_VEC_BASE + link * XLP_MSIVEC_PER_LINK + msivec; |
| } |
| |
| /* get the link MSI vector from irq number */ |
| static inline int nlm_irq_msivec(int irq) |
| { |
| return (irq - NLM_MSI_VEC_BASE) % XLP_MSIVEC_PER_LINK; |
| } |
| |
| /* get the link from the irq number */ |
| static inline int nlm_irq_msilink(int irq) |
| { |
| int total_msivec = XLP_MSIVEC_PER_LINK * PCIE_NLINKS; |
| |
| return ((irq - NLM_MSI_VEC_BASE) % total_msivec) / |
| XLP_MSIVEC_PER_LINK; |
| } |
| |
| /* |
| * For XLP 8xx/4xx/3xx/2xx, only 32 MSI-X vectors are possible because |
| * there are only 32 PIC interrupts for MSI. We split them statically |
| * and use 8 MSI-X vectors per link - this keeps the allocation and |
| * lookup simple. |
| * On XLP 9xx, there are 32 vectors per link, and the interrupts are |
| * not routed thru PIC, so we can use all 128 MSI-X vectors. |
| */ |
| static inline int nlm_link_msixirq(int link, int bit) |
| { |
| return NLM_MSIX_VEC_BASE + link * XLP_MSIXVEC_PER_LINK + bit; |
| } |
| |
| /* get the link MSI vector from irq number */ |
| static inline int nlm_irq_msixvec(int irq) |
| { |
| return (irq - NLM_MSIX_VEC_BASE) % XLP_MSIXVEC_TOTAL; |
| } |
| |
| /* get the link from MSIX vec */ |
| static inline int nlm_irq_msixlink(int msixvec) |
| { |
| return msixvec / XLP_MSIXVEC_PER_LINK; |
| } |
| |
| /* |
| * Per link MSI and MSI-X information, set as IRQ handler data for |
| * MSI and MSI-X interrupts. |
| */ |
| struct xlp_msi_data { |
| struct nlm_soc_info *node; |
| uint64_t lnkbase; |
| uint32_t msi_enabled_mask; |
| uint32_t msi_alloc_mask; |
| uint32_t msix_alloc_mask; |
| spinlock_t msi_lock; |
| }; |
| |
| /* |
| * MSI Chip definitions |
| * |
| * On XLP, there is a PIC interrupt associated with each PCIe link on the |
| * chip (which appears as a PCI bridge to us). This gives us 32 MSI irqa |
| * per link and 128 overall. |
| * |
| * When a device connected to the link raises a MSI interrupt, we get a |
| * link interrupt and we then have to look at PCIE_MSI_STATUS register at |
| * the bridge to map it to the IRQ |
| */ |
| static void xlp_msi_enable(struct irq_data *d) |
| { |
| struct xlp_msi_data *md = irq_data_get_irq_handler_data(d); |
| unsigned long flags; |
| int vec; |
| |
| vec = nlm_irq_msivec(d->irq); |
| spin_lock_irqsave(&md->msi_lock, flags); |
| md->msi_enabled_mask |= 1u << vec; |
| if (cpu_is_xlp9xx()) |
| nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN, |
| md->msi_enabled_mask); |
| else |
| nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask); |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| } |
| |
| static void xlp_msi_disable(struct irq_data *d) |
| { |
| struct xlp_msi_data *md = irq_data_get_irq_handler_data(d); |
| unsigned long flags; |
| int vec; |
| |
| vec = nlm_irq_msivec(d->irq); |
| spin_lock_irqsave(&md->msi_lock, flags); |
| md->msi_enabled_mask &= ~(1u << vec); |
| if (cpu_is_xlp9xx()) |
| nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_EN, |
| md->msi_enabled_mask); |
| else |
| nlm_write_reg(md->lnkbase, PCIE_MSI_EN, md->msi_enabled_mask); |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| } |
| |
| static void xlp_msi_mask_ack(struct irq_data *d) |
| { |
| struct xlp_msi_data *md = irq_data_get_irq_handler_data(d); |
| int link, vec; |
| |
| link = nlm_irq_msilink(d->irq); |
| vec = nlm_irq_msivec(d->irq); |
| xlp_msi_disable(d); |
| |
| /* Ack MSI on bridge */ |
| if (cpu_is_xlp9xx()) |
| nlm_write_reg(md->lnkbase, PCIE_9XX_MSI_STATUS, 1u << vec); |
| else |
| nlm_write_reg(md->lnkbase, PCIE_MSI_STATUS, 1u << vec); |
| |
| } |
| |
| static struct irq_chip xlp_msi_chip = { |
| .name = "XLP-MSI", |
| .irq_enable = xlp_msi_enable, |
| .irq_disable = xlp_msi_disable, |
| .irq_mask_ack = xlp_msi_mask_ack, |
| .irq_unmask = xlp_msi_enable, |
| }; |
| |
| /* |
| * XLP8XX/4XX/3XX/2XX: |
| * The MSI-X interrupt handling is different from MSI, there are 32 MSI-X |
| * interrupts generated by the PIC and each of these correspond to a MSI-X |
| * vector (0-31) that can be assigned. |
| * |
| * We divide the MSI-X vectors to 8 per link and do a per-link allocation |
| * |
| * XLP9XX: |
| * 32 MSI-X vectors are available per link, and the interrupts are not routed |
| * thru the PIC. PIC ack not needed. |
| * |
| * Enable and disable done using standard MSI functions. |
| */ |
| static void xlp_msix_mask_ack(struct irq_data *d) |
| { |
| struct xlp_msi_data *md; |
| int link, msixvec; |
| uint32_t status_reg, bit; |
| |
| msixvec = nlm_irq_msixvec(d->irq); |
| link = nlm_irq_msixlink(msixvec); |
| pci_msi_mask_irq(d); |
| md = irq_data_get_irq_handler_data(d); |
| |
| /* Ack MSI on bridge */ |
| if (cpu_is_xlp9xx()) { |
| status_reg = PCIE_9XX_MSIX_STATUSX(link); |
| bit = msixvec % XLP_MSIXVEC_PER_LINK; |
| } else { |
| status_reg = PCIE_MSIX_STATUS; |
| bit = msixvec; |
| } |
| nlm_write_reg(md->lnkbase, status_reg, 1u << bit); |
| |
| if (!cpu_is_xlp9xx()) |
| nlm_pic_ack(md->node->picbase, |
| PIC_IRT_PCIE_MSIX_INDEX(msixvec)); |
| } |
| |
| static struct irq_chip xlp_msix_chip = { |
| .name = "XLP-MSIX", |
| .irq_enable = pci_msi_unmask_irq, |
| .irq_disable = pci_msi_mask_irq, |
| .irq_mask_ack = xlp_msix_mask_ack, |
| .irq_unmask = pci_msi_unmask_irq, |
| }; |
| |
| void arch_teardown_msi_irq(unsigned int irq) |
| { |
| } |
| |
| /* |
| * Setup a PCIe link for MSI. By default, the links are in |
| * legacy interrupt mode. We will switch them to MSI mode |
| * at the first MSI request. |
| */ |
| static void xlp_config_link_msi(uint64_t lnkbase, int lirq, uint64_t msiaddr) |
| { |
| u32 val; |
| |
| if (cpu_is_xlp9xx()) { |
| val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0); |
| if ((val & 0x200) == 0) { |
| val |= 0x200; /* MSI Interrupt enable */ |
| nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val); |
| } |
| } else { |
| val = nlm_read_reg(lnkbase, PCIE_INT_EN0); |
| if ((val & 0x200) == 0) { |
| val |= 0x200; |
| nlm_write_reg(lnkbase, PCIE_INT_EN0, val); |
| } |
| } |
| |
| val = nlm_read_reg(lnkbase, 0x1); /* CMD */ |
| if ((val & 0x0400) == 0) { |
| val |= 0x0400; |
| nlm_write_reg(lnkbase, 0x1, val); |
| } |
| |
| /* Update IRQ in the PCI irq reg */ |
| val = nlm_read_pci_reg(lnkbase, 0xf); |
| val &= ~0x1fu; |
| val |= (1 << 8) | lirq; |
| nlm_write_pci_reg(lnkbase, 0xf, val); |
| |
| /* MSI addr */ |
| nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRH, msiaddr >> 32); |
| nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_ADDRL, msiaddr & 0xffffffff); |
| |
| /* MSI cap for bridge */ |
| val = nlm_read_reg(lnkbase, PCIE_BRIDGE_MSI_CAP); |
| if ((val & (1 << 16)) == 0) { |
| val |= 0xb << 16; /* mmc32, msi enable */ |
| nlm_write_reg(lnkbase, PCIE_BRIDGE_MSI_CAP, val); |
| } |
| } |
| |
| /* |
| * Allocate a MSI vector on a link |
| */ |
| static int xlp_setup_msi(uint64_t lnkbase, int node, int link, |
| struct msi_desc *desc) |
| { |
| struct xlp_msi_data *md; |
| struct msi_msg msg; |
| unsigned long flags; |
| int msivec, irt, lirq, xirq, ret; |
| uint64_t msiaddr; |
| |
| /* Get MSI data for the link */ |
| lirq = PIC_PCIE_LINK_MSI_IRQ(link); |
| xirq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0)); |
| md = irq_get_handler_data(xirq); |
| msiaddr = MSI_LINK_ADDR(node, link); |
| |
| spin_lock_irqsave(&md->msi_lock, flags); |
| if (md->msi_alloc_mask == 0) { |
| xlp_config_link_msi(lnkbase, lirq, msiaddr); |
| /* switch the link IRQ to MSI range */ |
| if (cpu_is_xlp9xx()) |
| irt = PIC_9XX_IRT_PCIE_LINK_INDEX(link); |
| else |
| irt = PIC_IRT_PCIE_LINK_INDEX(link); |
| nlm_setup_pic_irq(node, lirq, lirq, irt); |
| nlm_pic_init_irt(nlm_get_node(node)->picbase, irt, lirq, |
| node * nlm_threads_per_node(), 1 /*en */); |
| } |
| |
| /* allocate a MSI vec, and tell the bridge about it */ |
| msivec = fls(md->msi_alloc_mask); |
| if (msivec == XLP_MSIVEC_PER_LINK) { |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| return -ENOMEM; |
| } |
| md->msi_alloc_mask |= (1u << msivec); |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| |
| msg.address_hi = msiaddr >> 32; |
| msg.address_lo = msiaddr & 0xffffffff; |
| msg.data = 0xc00 | msivec; |
| |
| xirq = xirq + msivec; /* msi mapped to global irq space */ |
| ret = irq_set_msi_desc(xirq, desc); |
| if (ret < 0) |
| return ret; |
| |
| pci_write_msi_msg(xirq, &msg); |
| return 0; |
| } |
| |
| /* |
| * Switch a link to MSI-X mode |
| */ |
| static void xlp_config_link_msix(uint64_t lnkbase, int lirq, uint64_t msixaddr) |
| { |
| u32 val; |
| |
| val = nlm_read_reg(lnkbase, 0x2C); |
| if ((val & 0x80000000U) == 0) { |
| val |= 0x80000000U; |
| nlm_write_reg(lnkbase, 0x2C, val); |
| } |
| |
| if (cpu_is_xlp9xx()) { |
| val = nlm_read_reg(lnkbase, PCIE_9XX_INT_EN0); |
| if ((val & 0x200) == 0) { |
| val |= 0x200; /* MSI Interrupt enable */ |
| nlm_write_reg(lnkbase, PCIE_9XX_INT_EN0, val); |
| } |
| } else { |
| val = nlm_read_reg(lnkbase, PCIE_INT_EN0); |
| if ((val & 0x200) == 0) { |
| val |= 0x200; /* MSI Interrupt enable */ |
| nlm_write_reg(lnkbase, PCIE_INT_EN0, val); |
| } |
| } |
| |
| val = nlm_read_reg(lnkbase, 0x1); /* CMD */ |
| if ((val & 0x0400) == 0) { |
| val |= 0x0400; |
| nlm_write_reg(lnkbase, 0x1, val); |
| } |
| |
| /* Update IRQ in the PCI irq reg */ |
| val = nlm_read_pci_reg(lnkbase, 0xf); |
| val &= ~0x1fu; |
| val |= (1 << 8) | lirq; |
| nlm_write_pci_reg(lnkbase, 0xf, val); |
| |
| if (cpu_is_xlp9xx()) { |
| /* MSI-X addresses */ |
| nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_BASE, |
| msixaddr >> 8); |
| nlm_write_reg(lnkbase, PCIE_9XX_BRIDGE_MSIX_ADDR_LIMIT, |
| (msixaddr + MSI_ADDR_SZ) >> 8); |
| } else { |
| /* MSI-X addresses */ |
| nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_BASE, |
| msixaddr >> 8); |
| nlm_write_reg(lnkbase, PCIE_BRIDGE_MSIX_ADDR_LIMIT, |
| (msixaddr + MSI_ADDR_SZ) >> 8); |
| } |
| } |
| |
| /* |
| * Allocate a MSI-X vector |
| */ |
| static int xlp_setup_msix(uint64_t lnkbase, int node, int link, |
| struct msi_desc *desc) |
| { |
| struct xlp_msi_data *md; |
| struct msi_msg msg; |
| unsigned long flags; |
| int t, msixvec, lirq, xirq, ret; |
| uint64_t msixaddr; |
| |
| /* Get MSI data for the link */ |
| lirq = PIC_PCIE_MSIX_IRQ(link); |
| xirq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0)); |
| md = irq_get_handler_data(xirq); |
| msixaddr = MSIX_LINK_ADDR(node, link); |
| |
| spin_lock_irqsave(&md->msi_lock, flags); |
| /* switch the PCIe link to MSI-X mode at the first alloc */ |
| if (md->msix_alloc_mask == 0) |
| xlp_config_link_msix(lnkbase, lirq, msixaddr); |
| |
| /* allocate a MSI-X vec, and tell the bridge about it */ |
| t = fls(md->msix_alloc_mask); |
| if (t == XLP_MSIXVEC_PER_LINK) { |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| return -ENOMEM; |
| } |
| md->msix_alloc_mask |= (1u << t); |
| spin_unlock_irqrestore(&md->msi_lock, flags); |
| |
| xirq += t; |
| msixvec = nlm_irq_msixvec(xirq); |
| |
| msg.address_hi = msixaddr >> 32; |
| msg.address_lo = msixaddr & 0xffffffff; |
| msg.data = 0xc00 | msixvec; |
| |
| ret = irq_set_msi_desc(xirq, desc); |
| if (ret < 0) |
| return ret; |
| |
| pci_write_msi_msg(xirq, &msg); |
| return 0; |
| } |
| |
| int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) |
| { |
| struct pci_dev *lnkdev; |
| uint64_t lnkbase; |
| int node, link, slot; |
| |
| lnkdev = xlp_get_pcie_link(dev); |
| if (lnkdev == NULL) { |
| dev_err(&dev->dev, "Could not find bridge\n"); |
| return 1; |
| } |
| slot = PCI_SLOT(lnkdev->devfn); |
| link = PCI_FUNC(lnkdev->devfn); |
| node = slot / 8; |
| lnkbase = nlm_get_pcie_base(node, link); |
| |
| if (desc->msi_attrib.is_msix) |
| return xlp_setup_msix(lnkbase, node, link, desc); |
| else |
| return xlp_setup_msi(lnkbase, node, link, desc); |
| } |
| |
| void __init xlp_init_node_msi_irqs(int node, int link) |
| { |
| struct nlm_soc_info *nodep; |
| struct xlp_msi_data *md; |
| int irq, i, irt, msixvec, val; |
| |
| pr_info("[%d %d] Init node PCI IRT\n", node, link); |
| nodep = nlm_get_node(node); |
| |
| /* Alloc an MSI block for the link */ |
| md = kzalloc(sizeof(*md), GFP_KERNEL); |
| spin_lock_init(&md->msi_lock); |
| md->msi_enabled_mask = 0; |
| md->msi_alloc_mask = 0; |
| md->msix_alloc_mask = 0; |
| md->node = nodep; |
| md->lnkbase = nlm_get_pcie_base(node, link); |
| |
| /* extended space for MSI interrupts */ |
| irq = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0)); |
| for (i = irq; i < irq + XLP_MSIVEC_PER_LINK; i++) { |
| irq_set_chip_and_handler(i, &xlp_msi_chip, handle_level_irq); |
| irq_set_handler_data(i, md); |
| } |
| |
| for (i = 0; i < XLP_MSIXVEC_PER_LINK ; i++) { |
| if (cpu_is_xlp9xx()) { |
| val = ((node * nlm_threads_per_node()) << 7 | |
| PIC_PCIE_MSIX_IRQ(link) << 1 | 0 << 0); |
| nlm_write_pcie_reg(md->lnkbase, PCIE_9XX_MSIX_VECX(i + |
| (link * XLP_MSIXVEC_PER_LINK)), val); |
| } else { |
| /* Initialize MSI-X irts to generate one interrupt |
| * per link |
| */ |
| msixvec = link * XLP_MSIXVEC_PER_LINK + i; |
| irt = PIC_IRT_PCIE_MSIX_INDEX(msixvec); |
| nlm_pic_init_irt(nodep->picbase, irt, |
| PIC_PCIE_MSIX_IRQ(link), |
| node * nlm_threads_per_node(), 1); |
| } |
| |
| /* Initialize MSI-X extended irq space for the link */ |
| irq = nlm_irq_to_xirq(node, nlm_link_msixirq(link, i)); |
| irq_set_chip_and_handler(irq, &xlp_msix_chip, handle_level_irq); |
| irq_set_handler_data(irq, md); |
| } |
| } |
| |
| void nlm_dispatch_msi(int node, int lirq) |
| { |
| struct xlp_msi_data *md; |
| int link, i, irqbase; |
| u32 status; |
| |
| link = lirq - PIC_PCIE_LINK_MSI_IRQ_BASE; |
| irqbase = nlm_irq_to_xirq(node, nlm_link_msiirq(link, 0)); |
| md = irq_get_handler_data(irqbase); |
| if (cpu_is_xlp9xx()) |
| status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSI_STATUS) & |
| md->msi_enabled_mask; |
| else |
| status = nlm_read_reg(md->lnkbase, PCIE_MSI_STATUS) & |
| md->msi_enabled_mask; |
| while (status) { |
| i = __ffs(status); |
| do_IRQ(irqbase + i); |
| status &= status - 1; |
| } |
| |
| /* Ack at eirr and PIC */ |
| ack_c0_eirr(PIC_PCIE_LINK_MSI_IRQ(link)); |
| if (cpu_is_xlp9xx()) |
| nlm_pic_ack(md->node->picbase, |
| PIC_9XX_IRT_PCIE_LINK_INDEX(link)); |
| else |
| nlm_pic_ack(md->node->picbase, PIC_IRT_PCIE_LINK_INDEX(link)); |
| } |
| |
| void nlm_dispatch_msix(int node, int lirq) |
| { |
| struct xlp_msi_data *md; |
| int link, i, irqbase; |
| u32 status; |
| |
| link = lirq - PIC_PCIE_MSIX_IRQ_BASE; |
| irqbase = nlm_irq_to_xirq(node, nlm_link_msixirq(link, 0)); |
| md = irq_get_handler_data(irqbase); |
| if (cpu_is_xlp9xx()) |
| status = nlm_read_reg(md->lnkbase, PCIE_9XX_MSIX_STATUSX(link)); |
| else |
| status = nlm_read_reg(md->lnkbase, PCIE_MSIX_STATUS); |
| |
| /* narrow it down to the MSI-x vectors for our link */ |
| if (!cpu_is_xlp9xx()) |
| status = (status >> (link * XLP_MSIXVEC_PER_LINK)) & |
| ((1 << XLP_MSIXVEC_PER_LINK) - 1); |
| |
| while (status) { |
| i = __ffs(status); |
| do_IRQ(irqbase + i); |
| status &= status - 1; |
| } |
| /* Ack at eirr and PIC */ |
| ack_c0_eirr(PIC_PCIE_MSIX_IRQ(link)); |
| } |