USB: EHCI: fix up root-hub TT mess
This patch (as1095) cleans up the HCD glue and several of the EHCI
bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it
means the same thing as the hcd->has_tt flag, so it is removed and the
other flag used in its place.
Some of the bus-glue files didn't get the relinquish_port method added
to their hc_driver structures. Although that routine currently
doesn't do anything for controllers with an integrated TT, in the
future it might. So the patch adds it where it is missing.
Lastly, some of the bus-glue files have erroneous entries for their
hc_driver's suspend and resume methods. These method pointers are
specific to PCI and shouldn't be used otherwise.
(The patch also includes an invisible whitespace fix.)
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6d9bed6..4843062 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -269,7 +269,7 @@
if (retval)
return retval;
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
@@ -295,10 +295,6 @@
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 601c879..539257f 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -26,7 +26,7 @@
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci_reset(ehci);
retval = ehci_init(hcd);
@@ -58,6 +58,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 3adfda8..9c5266d 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -139,10 +139,6 @@
*/
.reset = ehci_orion_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -165,6 +161,7 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
};
static void __init
@@ -250,7 +247,7 @@
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
/*
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5bb7f6b..6ff453f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -129,7 +129,6 @@
switch (pdev->vendor) {
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
hcd->has_tt = 1;
tdi_reset(ehci);
}
@@ -379,7 +378,7 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
+ .relinquish_port = ehci_relinquish_port,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ee305b1..d94a2ef 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -76,6 +76,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
};
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bf92d20..3cb4823 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -112,7 +112,6 @@
u32 command;
/* SILICON QUIRKS */
- unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
@@ -678,7 +677,7 @@
* needed (mostly in root hub code).
*/
-#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
+#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
/* Returns the speed of a device attached to a port on the root hub. */
static inline unsigned int