| /* |
| * |
| * Hardware accelerated Matrox Millennium I, II, Mystique, G100, G200 and G400 |
| * |
| * (c) 1998-2002 Petr Vandrovec <vandrove@vc.cvut.cz> |
| * |
| * Portions Copyright (c) 2001 Matrox Graphics Inc. |
| * |
| * Version: 1.65 2002/08/14 |
| * |
| * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org> |
| * |
| * Contributors: "menion?" <menion@mindless.com> |
| * Betatesting, fixes, ideas |
| * |
| * "Kurt Garloff" <garloff@suse.de> |
| * Betatesting, fixes, ideas, videomodes, videomodes timmings |
| * |
| * "Tom Rini" <trini@kernel.crashing.org> |
| * MTRR stuff, PPC cleanups, betatesting, fixes, ideas |
| * |
| * "Bibek Sahu" <scorpio@dodds.net> |
| * Access device through readb|w|l and write b|w|l |
| * Extensive debugging stuff |
| * |
| * "Daniel Haun" <haund@usa.net> |
| * Testing, hardware cursor fixes |
| * |
| * "Scott Wood" <sawst46+@pitt.edu> |
| * Fixes |
| * |
| * "Gerd Knorr" <kraxel@goldbach.isdn.cs.tu-berlin.de> |
| * Betatesting |
| * |
| * "Kelly French" <targon@hazmat.com> |
| * "Fernando Herrera" <fherrera@eurielec.etsit.upm.es> |
| * Betatesting, bug reporting |
| * |
| * "Pablo Bianucci" <pbian@pccp.com.ar> |
| * Fixes, ideas, betatesting |
| * |
| * "Inaky Perez Gonzalez" <inaky@peloncho.fis.ucm.es> |
| * Fixes, enhandcements, ideas, betatesting |
| * |
| * "Ryuichi Oikawa" <roikawa@rr.iiij4u.or.jp> |
| * PPC betatesting, PPC support, backward compatibility |
| * |
| * "Paul Womar" <Paul@pwomar.demon.co.uk> |
| * "Owen Waller" <O.Waller@ee.qub.ac.uk> |
| * PPC betatesting |
| * |
| * "Thomas Pornin" <pornin@bolet.ens.fr> |
| * Alpha betatesting |
| * |
| * "Pieter van Leuven" <pvl@iae.nl> |
| * "Ulf Jaenicke-Roessler" <ujr@physik.phy.tu-dresden.de> |
| * G100 testing |
| * |
| * "H. Peter Arvin" <hpa@transmeta.com> |
| * Ideas |
| * |
| * "Cort Dougan" <cort@cs.nmt.edu> |
| * CHRP fixes and PReP cleanup |
| * |
| * "Mark Vojkovich" <mvojkovi@ucsd.edu> |
| * G400 support |
| * |
| * "David C. Hansen" <haveblue@us.ibm.com> |
| * Fixes |
| * |
| * "Ian Romanick" <idr@us.ibm.com> |
| * Find PInS data in BIOS on PowerPC systems. |
| * |
| * (following author is not in any relation with this code, but his code |
| * is included in this driver) |
| * |
| * Based on framebuffer driver for VBE 2.0 compliant graphic boards |
| * (c) 1998 Gerd Knorr <kraxel@cs.tu-berlin.de> |
| * |
| * (following author is not in any relation with this code, but his ideas |
| * were used when writing this driver) |
| * |
| * FreeVBE/AF (Matrox), "Shawn Hargreaves" <shawn@talula.demon.co.uk> |
| * |
| */ |
| |
| |
| #include "matroxfb_misc.h" |
| #include <linux/interrupt.h> |
| #include <linux/matroxfb.h> |
| |
| void matroxfb_DAC_out(CPMINFO int reg, int val) { |
| DBG_REG(__FUNCTION__) |
| mga_outb(M_RAMDAC_BASE+M_X_INDEX, reg); |
| mga_outb(M_RAMDAC_BASE+M_X_DATAREG, val); |
| } |
| |
| int matroxfb_DAC_in(CPMINFO int reg) { |
| DBG_REG(__FUNCTION__) |
| mga_outb(M_RAMDAC_BASE+M_X_INDEX, reg); |
| return mga_inb(M_RAMDAC_BASE+M_X_DATAREG); |
| } |
| |
| void matroxfb_var2my(struct fb_var_screeninfo* var, struct my_timming* mt) { |
| unsigned int pixclock = var->pixclock; |
| |
| DBG(__FUNCTION__) |
| |
| if (!pixclock) pixclock = 10000; /* 10ns = 100MHz */ |
| mt->pixclock = 1000000000 / pixclock; |
| if (mt->pixclock < 1) mt->pixclock = 1; |
| mt->mnp = -1; |
| mt->dblscan = var->vmode & FB_VMODE_DOUBLE; |
| mt->interlaced = var->vmode & FB_VMODE_INTERLACED; |
| mt->HDisplay = var->xres; |
| mt->HSyncStart = mt->HDisplay + var->right_margin; |
| mt->HSyncEnd = mt->HSyncStart + var->hsync_len; |
| mt->HTotal = mt->HSyncEnd + var->left_margin; |
| mt->VDisplay = var->yres; |
| mt->VSyncStart = mt->VDisplay + var->lower_margin; |
| mt->VSyncEnd = mt->VSyncStart + var->vsync_len; |
| mt->VTotal = mt->VSyncEnd + var->upper_margin; |
| mt->sync = var->sync; |
| } |
| |
| int matroxfb_PLL_calcclock(const struct matrox_pll_features* pll, unsigned int freq, unsigned int fmax, |
| unsigned int* in, unsigned int* feed, unsigned int* post) { |
| unsigned int bestdiff = ~0; |
| unsigned int bestvco = 0; |
| unsigned int fxtal = pll->ref_freq; |
| unsigned int fwant; |
| unsigned int p; |
| |
| DBG(__FUNCTION__) |
| |
| fwant = freq; |
| |
| #ifdef DEBUG |
| printk(KERN_ERR "post_shift_max: %d\n", pll->post_shift_max); |
| printk(KERN_ERR "ref_freq: %d\n", pll->ref_freq); |
| printk(KERN_ERR "freq: %d\n", freq); |
| printk(KERN_ERR "vco_freq_min: %d\n", pll->vco_freq_min); |
| printk(KERN_ERR "in_div_min: %d\n", pll->in_div_min); |
| printk(KERN_ERR "in_div_max: %d\n", pll->in_div_max); |
| printk(KERN_ERR "feed_div_min: %d\n", pll->feed_div_min); |
| printk(KERN_ERR "feed_div_max: %d\n", pll->feed_div_max); |
| printk(KERN_ERR "fmax: %d\n", fmax); |
| #endif |
| for (p = 1; p <= pll->post_shift_max; p++) { |
| if (fwant * 2 > fmax) |
| break; |
| fwant *= 2; |
| } |
| if (fwant < pll->vco_freq_min) fwant = pll->vco_freq_min; |
| if (fwant > fmax) fwant = fmax; |
| for (; p-- > 0; fwant >>= 1, bestdiff >>= 1) { |
| unsigned int m; |
| |
| if (fwant < pll->vco_freq_min) break; |
| for (m = pll->in_div_min; m <= pll->in_div_max; m++) { |
| unsigned int diff, fvco; |
| unsigned int n; |
| |
| n = (fwant * (m + 1) + (fxtal >> 1)) / fxtal - 1; |
| if (n > pll->feed_div_max) |
| break; |
| if (n < pll->feed_div_min) |
| n = pll->feed_div_min; |
| fvco = (fxtal * (n + 1)) / (m + 1); |
| if (fvco < fwant) |
| diff = fwant - fvco; |
| else |
| diff = fvco - fwant; |
| if (diff < bestdiff) { |
| bestdiff = diff; |
| *post = p; |
| *in = m; |
| *feed = n; |
| bestvco = fvco; |
| } |
| } |
| } |
| dprintk(KERN_ERR "clk: %02X %02X %02X %d %d %d\n", *in, *feed, *post, fxtal, bestvco, fwant); |
| return bestvco; |
| } |
| |
| int matroxfb_vgaHWinit(WPMINFO struct my_timming* m) { |
| unsigned int hd, hs, he, hbe, ht; |
| unsigned int vd, vs, ve, vt, lc; |
| unsigned int wd; |
| unsigned int divider; |
| int i; |
| struct matrox_hw_state * const hw = &ACCESS_FBINFO(hw); |
| |
| DBG(__FUNCTION__) |
| |
| hw->SEQ[0] = 0x00; |
| hw->SEQ[1] = 0x01; /* or 0x09 */ |
| hw->SEQ[2] = 0x0F; /* bitplanes */ |
| hw->SEQ[3] = 0x00; |
| hw->SEQ[4] = 0x0E; |
| /* CRTC 0..7, 9, 16..19, 21, 22 are reprogrammed by Matrox Millennium code... Hope that by MGA1064 too */ |
| if (m->dblscan) { |
| m->VTotal <<= 1; |
| m->VDisplay <<= 1; |
| m->VSyncStart <<= 1; |
| m->VSyncEnd <<= 1; |
| } |
| if (m->interlaced) { |
| m->VTotal >>= 1; |
| m->VDisplay >>= 1; |
| m->VSyncStart >>= 1; |
| m->VSyncEnd >>= 1; |
| } |
| |
| /* GCTL is ignored when not using 0xA0000 aperture */ |
| hw->GCTL[0] = 0x00; |
| hw->GCTL[1] = 0x00; |
| hw->GCTL[2] = 0x00; |
| hw->GCTL[3] = 0x00; |
| hw->GCTL[4] = 0x00; |
| hw->GCTL[5] = 0x40; |
| hw->GCTL[6] = 0x05; |
| hw->GCTL[7] = 0x0F; |
| hw->GCTL[8] = 0xFF; |
| |
| /* Whole ATTR is ignored in PowerGraphics mode */ |
| for (i = 0; i < 16; i++) |
| hw->ATTR[i] = i; |
| hw->ATTR[16] = 0x41; |
| hw->ATTR[17] = 0xFF; |
| hw->ATTR[18] = 0x0F; |
| hw->ATTR[19] = 0x00; |
| hw->ATTR[20] = 0x00; |
| |
| hd = m->HDisplay >> 3; |
| hs = m->HSyncStart >> 3; |
| he = m->HSyncEnd >> 3; |
| ht = m->HTotal >> 3; |
| /* standard timmings are in 8pixels, but for interleaved we cannot */ |
| /* do it for 4bpp (because of (4bpp >> 1(interleaved))/4 == 0) */ |
| /* using 16 or more pixels per unit can save us */ |
| divider = ACCESS_FBINFO(curr.final_bppShift); |
| while (divider & 3) { |
| hd >>= 1; |
| hs >>= 1; |
| he >>= 1; |
| ht >>= 1; |
| divider <<= 1; |
| } |
| divider = divider / 4; |
| /* divider can be from 1 to 8 */ |
| while (divider > 8) { |
| hd <<= 1; |
| hs <<= 1; |
| he <<= 1; |
| ht <<= 1; |
| divider >>= 1; |
| } |
| hd = hd - 1; |
| hs = hs - 1; |
| he = he - 1; |
| ht = ht - 1; |
| vd = m->VDisplay - 1; |
| vs = m->VSyncStart - 1; |
| ve = m->VSyncEnd - 1; |
| vt = m->VTotal - 2; |
| lc = vd; |
| /* G200 cannot work with (ht & 7) == 6 */ |
| if (((ht & 0x07) == 0x06) || ((ht & 0x0F) == 0x04)) |
| ht++; |
| hbe = ht; |
| wd = ACCESS_FBINFO(fbcon).var.xres_virtual * ACCESS_FBINFO(curr.final_bppShift) / 64; |
| |
| hw->CRTCEXT[0] = 0; |
| hw->CRTCEXT[5] = 0; |
| if (m->interlaced) { |
| hw->CRTCEXT[0] = 0x80; |
| hw->CRTCEXT[5] = (hs + he - ht) >> 1; |
| if (!m->dblscan) |
| wd <<= 1; |
| vt &= ~1; |
| } |
| hw->CRTCEXT[0] |= (wd & 0x300) >> 4; |
| hw->CRTCEXT[1] = (((ht - 4) & 0x100) >> 8) | |
| ((hd & 0x100) >> 7) | /* blanking */ |
| ((hs & 0x100) >> 6) | /* sync start */ |
| (hbe & 0x040); /* end hor. blanking */ |
| /* FIXME: Enable vidrst only on G400, and only if TV-out is used */ |
| if (ACCESS_FBINFO(outputs[1]).src == MATROXFB_SRC_CRTC1) |
| hw->CRTCEXT[1] |= 0x88; /* enable horizontal and vertical vidrst */ |
| hw->CRTCEXT[2] = ((vt & 0xC00) >> 10) | |
| ((vd & 0x400) >> 8) | /* disp end */ |
| ((vd & 0xC00) >> 7) | /* vblanking start */ |
| ((vs & 0xC00) >> 5) | |
| ((lc & 0x400) >> 3); |
| hw->CRTCEXT[3] = (divider - 1) | 0x80; |
| hw->CRTCEXT[4] = 0; |
| |
| hw->CRTC[0] = ht-4; |
| hw->CRTC[1] = hd; |
| hw->CRTC[2] = hd; |
| hw->CRTC[3] = (hbe & 0x1F) | 0x80; |
| hw->CRTC[4] = hs; |
| hw->CRTC[5] = ((hbe & 0x20) << 2) | (he & 0x1F); |
| hw->CRTC[6] = vt & 0xFF; |
| hw->CRTC[7] = ((vt & 0x100) >> 8) | |
| ((vd & 0x100) >> 7) | |
| ((vs & 0x100) >> 6) | |
| ((vd & 0x100) >> 5) | |
| ((lc & 0x100) >> 4) | |
| ((vt & 0x200) >> 4) | |
| ((vd & 0x200) >> 3) | |
| ((vs & 0x200) >> 2); |
| hw->CRTC[8] = 0x00; |
| hw->CRTC[9] = ((vd & 0x200) >> 4) | |
| ((lc & 0x200) >> 3); |
| if (m->dblscan && !m->interlaced) |
| hw->CRTC[9] |= 0x80; |
| for (i = 10; i < 16; i++) |
| hw->CRTC[i] = 0x00; |
| hw->CRTC[16] = vs /* & 0xFF */; |
| hw->CRTC[17] = (ve & 0x0F) | 0x20; |
| hw->CRTC[18] = vd /* & 0xFF */; |
| hw->CRTC[19] = wd /* & 0xFF */; |
| hw->CRTC[20] = 0x00; |
| hw->CRTC[21] = vd /* & 0xFF */; |
| hw->CRTC[22] = (vt + 1) /* & 0xFF */; |
| hw->CRTC[23] = 0xC3; |
| hw->CRTC[24] = lc; |
| return 0; |
| }; |
| |
| void matroxfb_vgaHWrestore(WPMINFO2) { |
| int i; |
| struct matrox_hw_state * const hw = &ACCESS_FBINFO(hw); |
| CRITFLAGS |
| |
| DBG(__FUNCTION__) |
| |
| dprintk(KERN_INFO "MiscOutReg: %02X\n", hw->MiscOutReg); |
| dprintk(KERN_INFO "SEQ regs: "); |
| for (i = 0; i < 5; i++) |
| dprintk("%02X:", hw->SEQ[i]); |
| dprintk("\n"); |
| dprintk(KERN_INFO "GDC regs: "); |
| for (i = 0; i < 9; i++) |
| dprintk("%02X:", hw->GCTL[i]); |
| dprintk("\n"); |
| dprintk(KERN_INFO "CRTC regs: "); |
| for (i = 0; i < 25; i++) |
| dprintk("%02X:", hw->CRTC[i]); |
| dprintk("\n"); |
| dprintk(KERN_INFO "ATTR regs: "); |
| for (i = 0; i < 21; i++) |
| dprintk("%02X:", hw->ATTR[i]); |
| dprintk("\n"); |
| |
| CRITBEGIN |
| |
| mga_inb(M_ATTR_RESET); |
| mga_outb(M_ATTR_INDEX, 0); |
| mga_outb(M_MISC_REG, hw->MiscOutReg); |
| for (i = 1; i < 5; i++) |
| mga_setr(M_SEQ_INDEX, i, hw->SEQ[i]); |
| mga_setr(M_CRTC_INDEX, 17, hw->CRTC[17] & 0x7F); |
| for (i = 0; i < 25; i++) |
| mga_setr(M_CRTC_INDEX, i, hw->CRTC[i]); |
| for (i = 0; i < 9; i++) |
| mga_setr(M_GRAPHICS_INDEX, i, hw->GCTL[i]); |
| for (i = 0; i < 21; i++) { |
| mga_inb(M_ATTR_RESET); |
| mga_outb(M_ATTR_INDEX, i); |
| mga_outb(M_ATTR_INDEX, hw->ATTR[i]); |
| } |
| mga_outb(M_PALETTE_MASK, 0xFF); |
| mga_outb(M_DAC_REG, 0x00); |
| for (i = 0; i < 768; i++) |
| mga_outb(M_DAC_VAL, hw->DACpal[i]); |
| mga_inb(M_ATTR_RESET); |
| mga_outb(M_ATTR_INDEX, 0x20); |
| |
| CRITEND |
| } |
| |
| static void get_pins(unsigned char __iomem* pins, struct matrox_bios* bd) { |
| unsigned int b0 = readb(pins); |
| |
| if (b0 == 0x2E && readb(pins+1) == 0x41) { |
| unsigned int pins_len = readb(pins+2); |
| unsigned int i; |
| unsigned char cksum; |
| unsigned char* dst = bd->pins; |
| |
| if (pins_len < 3 || pins_len > 128) { |
| return; |
| } |
| *dst++ = 0x2E; |
| *dst++ = 0x41; |
| *dst++ = pins_len; |
| cksum = 0x2E + 0x41 + pins_len; |
| for (i = 3; i < pins_len; i++) { |
| cksum += *dst++ = readb(pins+i); |
| } |
| if (cksum) { |
| return; |
| } |
| bd->pins_len = pins_len; |
| } else if (b0 == 0x40 && readb(pins+1) == 0x00) { |
| unsigned int i; |
| unsigned char* dst = bd->pins; |
| |
| *dst++ = 0x40; |
| *dst++ = 0; |
| for (i = 2; i < 0x40; i++) { |
| *dst++ = readb(pins+i); |
| } |
| bd->pins_len = 0x40; |
| } |
| } |
| |
| static void get_bios_version(unsigned char __iomem * vbios, struct matrox_bios* bd) { |
| unsigned int pcir_offset; |
| |
| pcir_offset = readb(vbios + 24) | (readb(vbios + 25) << 8); |
| if (pcir_offset >= 26 && pcir_offset < 0xFFE0 && |
| readb(vbios + pcir_offset ) == 'P' && |
| readb(vbios + pcir_offset + 1) == 'C' && |
| readb(vbios + pcir_offset + 2) == 'I' && |
| readb(vbios + pcir_offset + 3) == 'R') { |
| unsigned char h; |
| |
| h = readb(vbios + pcir_offset + 0x12); |
| bd->version.vMaj = (h >> 4) & 0xF; |
| bd->version.vMin = h & 0xF; |
| bd->version.vRev = readb(vbios + pcir_offset + 0x13); |
| } else { |
| unsigned char h; |
| |
| h = readb(vbios + 5); |
| bd->version.vMaj = (h >> 4) & 0xF; |
| bd->version.vMin = h & 0xF; |
| bd->version.vRev = 0; |
| } |
| } |
| |
| static void get_bios_output(unsigned char __iomem* vbios, struct matrox_bios* bd) { |
| unsigned char b; |
| |
| b = readb(vbios + 0x7FF1); |
| if (b == 0xFF) { |
| b = 0; |
| } |
| bd->output.state = b; |
| } |
| |
| static void get_bios_tvout(unsigned char __iomem* vbios, struct matrox_bios* bd) { |
| unsigned int i; |
| |
| /* Check for 'IBM .*(V....TVO' string - it means TVO BIOS */ |
| bd->output.tvout = 0; |
| if (readb(vbios + 0x1D) != 'I' || |
| readb(vbios + 0x1E) != 'B' || |
| readb(vbios + 0x1F) != 'M' || |
| readb(vbios + 0x20) != ' ') { |
| return; |
| } |
| for (i = 0x2D; i < 0x2D + 128; i++) { |
| unsigned char b = readb(vbios + i); |
| |
| if (b == '(' && readb(vbios + i + 1) == 'V') { |
| if (readb(vbios + i + 6) == 'T' && |
| readb(vbios + i + 7) == 'V' && |
| readb(vbios + i + 8) == 'O') { |
| bd->output.tvout = 1; |
| } |
| return; |
| } |
| if (b == 0) |
| break; |
| } |
| } |
| |
| static void parse_bios(unsigned char __iomem* vbios, struct matrox_bios* bd) { |
| unsigned int pins_offset; |
| |
| if (readb(vbios) != 0x55 || readb(vbios + 1) != 0xAA) { |
| return; |
| } |
| bd->bios_valid = 1; |
| get_bios_version(vbios, bd); |
| get_bios_output(vbios, bd); |
| get_bios_tvout(vbios, bd); |
| #if defined(__powerpc__) |
| /* On PowerPC cards, the PInS offset isn't stored at the end of the |
| * BIOS image. Instead, you must search the entire BIOS image for |
| * the magic PInS signature. |
| * |
| * This actually applies to all OpenFirmware base cards. Since these |
| * cards could be put in a MIPS or SPARC system, should the condition |
| * be something different? |
| */ |
| for ( pins_offset = 0 ; pins_offset <= 0xFF80 ; pins_offset++ ) { |
| unsigned char header[3]; |
| |
| header[0] = readb(vbios + pins_offset); |
| header[1] = readb(vbios + pins_offset + 1); |
| header[2] = readb(vbios + pins_offset + 2); |
| if ( (header[0] == 0x2E) && (header[1] == 0x41) |
| && ((header[2] == 0x40) || (header[2] == 0x80)) ) { |
| printk(KERN_INFO "PInS data found at offset %u\n", |
| pins_offset); |
| get_pins(vbios + pins_offset, bd); |
| break; |
| } |
| } |
| #else |
| pins_offset = readb(vbios + 0x7FFC) | (readb(vbios + 0x7FFD) << 8); |
| if (pins_offset <= 0xFF80) { |
| get_pins(vbios + pins_offset, bd); |
| } |
| #endif |
| } |
| |
| #define get_u16(x) (le16_to_cpu(get_unaligned((__u16*)(x)))) |
| #define get_u32(x) (le32_to_cpu(get_unaligned((__u32*)(x)))) |
| static int parse_pins1(WPMINFO const struct matrox_bios* bd) { |
| unsigned int maxdac; |
| |
| switch (bd->pins[22]) { |
| case 0: maxdac = 175000; break; |
| case 1: maxdac = 220000; break; |
| default: maxdac = 240000; break; |
| } |
| if (get_u16(bd->pins + 24)) { |
| maxdac = get_u16(bd->pins + 24) * 10; |
| } |
| MINFO->limits.pixel.vcomax = maxdac; |
| MINFO->values.pll.system = get_u16(bd->pins + 28) ? get_u16(bd->pins + 28) * 10 : 50000; |
| /* ignore 4MB, 8MB, module clocks */ |
| MINFO->features.pll.ref_freq = 14318; |
| MINFO->values.reg.mctlwtst = 0x00030101; |
| return 0; |
| } |
| |
| static void default_pins1(WPMINFO2) { |
| /* Millennium */ |
| MINFO->limits.pixel.vcomax = 220000; |
| MINFO->values.pll.system = 50000; |
| MINFO->features.pll.ref_freq = 14318; |
| MINFO->values.reg.mctlwtst = 0x00030101; |
| } |
| |
| static int parse_pins2(WPMINFO const struct matrox_bios* bd) { |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = (bd->pins[41] == 0xFF) ? 230000 : ((bd->pins[41] + 100) * 1000); |
| MINFO->values.reg.mctlwtst = ((bd->pins[51] & 0x01) ? 0x00000001 : 0) | |
| ((bd->pins[51] & 0x02) ? 0x00000100 : 0) | |
| ((bd->pins[51] & 0x04) ? 0x00010000 : 0) | |
| ((bd->pins[51] & 0x08) ? 0x00020000 : 0); |
| MINFO->values.pll.system = (bd->pins[43] == 0xFF) ? 50000 : ((bd->pins[43] + 100) * 1000); |
| MINFO->features.pll.ref_freq = 14318; |
| return 0; |
| } |
| |
| static void default_pins2(WPMINFO2) { |
| /* Millennium II, Mystique */ |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = 230000; |
| MINFO->values.reg.mctlwtst = 0x00030101; |
| MINFO->values.pll.system = 50000; |
| MINFO->features.pll.ref_freq = 14318; |
| } |
| |
| static int parse_pins3(WPMINFO const struct matrox_bios* bd) { |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = (bd->pins[36] == 0xFF) ? 230000 : ((bd->pins[36] + 100) * 1000); |
| MINFO->values.reg.mctlwtst = get_u32(bd->pins + 48) == 0xFFFFFFFF ? 0x01250A21 : get_u32(bd->pins + 48); |
| /* memory config */ |
| MINFO->values.reg.memrdbk = ((bd->pins[57] << 21) & 0x1E000000) | |
| ((bd->pins[57] << 22) & 0x00C00000) | |
| ((bd->pins[56] << 1) & 0x000001E0) | |
| ( bd->pins[56] & 0x0000000F); |
| MINFO->values.reg.opt = (bd->pins[54] & 7) << 10; |
| MINFO->values.reg.opt2 = bd->pins[58] << 12; |
| MINFO->features.pll.ref_freq = (bd->pins[52] & 0x20) ? 14318 : 27000; |
| return 0; |
| } |
| |
| static void default_pins3(WPMINFO2) { |
| /* G100, G200 */ |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = 230000; |
| MINFO->values.reg.mctlwtst = 0x01250A21; |
| MINFO->values.reg.memrdbk = 0x00000000; |
| MINFO->values.reg.opt = 0x00000C00; |
| MINFO->values.reg.opt2 = 0x00000000; |
| MINFO->features.pll.ref_freq = 27000; |
| } |
| |
| static int parse_pins4(WPMINFO const struct matrox_bios* bd) { |
| MINFO->limits.pixel.vcomax = (bd->pins[ 39] == 0xFF) ? 230000 : bd->pins[ 39] * 4000; |
| MINFO->limits.system.vcomax = (bd->pins[ 38] == 0xFF) ? MINFO->limits.pixel.vcomax : bd->pins[ 38] * 4000; |
| MINFO->values.reg.mctlwtst = get_u32(bd->pins + 71); |
| MINFO->values.reg.memrdbk = ((bd->pins[87] << 21) & 0x1E000000) | |
| ((bd->pins[87] << 22) & 0x00C00000) | |
| ((bd->pins[86] << 1) & 0x000001E0) | |
| ( bd->pins[86] & 0x0000000F); |
| MINFO->values.reg.opt = ((bd->pins[53] << 15) & 0x00400000) | |
| ((bd->pins[53] << 22) & 0x10000000) | |
| ((bd->pins[53] << 7) & 0x00001C00); |
| MINFO->values.reg.opt3 = get_u32(bd->pins + 67); |
| MINFO->values.pll.system = (bd->pins[ 65] == 0xFF) ? 200000 : bd->pins[ 65] * 4000; |
| MINFO->features.pll.ref_freq = (bd->pins[ 92] & 0x01) ? 14318 : 27000; |
| return 0; |
| } |
| |
| static void default_pins4(WPMINFO2) { |
| /* G400 */ |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = 252000; |
| MINFO->values.reg.mctlwtst = 0x04A450A1; |
| MINFO->values.reg.memrdbk = 0x000000E7; |
| MINFO->values.reg.opt = 0x10000400; |
| MINFO->values.reg.opt3 = 0x0190A419; |
| MINFO->values.pll.system = 200000; |
| MINFO->features.pll.ref_freq = 27000; |
| } |
| |
| static int parse_pins5(WPMINFO const struct matrox_bios* bd) { |
| unsigned int mult; |
| |
| mult = bd->pins[4]?8000:6000; |
| |
| MINFO->limits.pixel.vcomax = (bd->pins[ 38] == 0xFF) ? 600000 : bd->pins[ 38] * mult; |
| MINFO->limits.system.vcomax = (bd->pins[ 36] == 0xFF) ? MINFO->limits.pixel.vcomax : bd->pins[ 36] * mult; |
| MINFO->limits.video.vcomax = (bd->pins[ 37] == 0xFF) ? MINFO->limits.system.vcomax : bd->pins[ 37] * mult; |
| MINFO->limits.pixel.vcomin = (bd->pins[123] == 0xFF) ? 256000 : bd->pins[123] * mult; |
| MINFO->limits.system.vcomin = (bd->pins[121] == 0xFF) ? MINFO->limits.pixel.vcomin : bd->pins[121] * mult; |
| MINFO->limits.video.vcomin = (bd->pins[122] == 0xFF) ? MINFO->limits.system.vcomin : bd->pins[122] * mult; |
| MINFO->values.pll.system = |
| MINFO->values.pll.video = (bd->pins[ 92] == 0xFF) ? 284000 : bd->pins[ 92] * 4000; |
| MINFO->values.reg.opt = get_u32(bd->pins+ 48); |
| MINFO->values.reg.opt2 = get_u32(bd->pins+ 52); |
| MINFO->values.reg.opt3 = get_u32(bd->pins+ 94); |
| MINFO->values.reg.mctlwtst = get_u32(bd->pins+ 98); |
| MINFO->values.reg.memmisc = get_u32(bd->pins+102); |
| MINFO->values.reg.memrdbk = get_u32(bd->pins+106); |
| MINFO->features.pll.ref_freq = (bd->pins[110] & 0x01) ? 14318 : 27000; |
| MINFO->values.memory.ddr = (bd->pins[114] & 0x60) == 0x20; |
| MINFO->values.memory.dll = (bd->pins[115] & 0x02) != 0; |
| MINFO->values.memory.emrswen = (bd->pins[115] & 0x01) != 0; |
| MINFO->values.reg.maccess = MINFO->values.memory.emrswen ? 0x00004000 : 0x00000000; |
| if (bd->pins[115] & 4) { |
| MINFO->values.reg.mctlwtst_core = MINFO->values.reg.mctlwtst; |
| } else { |
| u_int32_t wtst_xlat[] = { 0, 1, 5, 6, 7, 5, 2, 3 }; |
| MINFO->values.reg.mctlwtst_core = (MINFO->values.reg.mctlwtst & ~7) | |
| wtst_xlat[MINFO->values.reg.mctlwtst & 7]; |
| } |
| MINFO->max_pixel_clock_panellink = bd->pins[47] * 4000; |
| return 0; |
| } |
| |
| static void default_pins5(WPMINFO2) { |
| /* Mine 16MB G450 with SDRAM DDR */ |
| MINFO->limits.pixel.vcomax = |
| MINFO->limits.system.vcomax = |
| MINFO->limits.video.vcomax = 600000; |
| MINFO->limits.pixel.vcomin = |
| MINFO->limits.system.vcomin = |
| MINFO->limits.video.vcomin = 256000; |
| MINFO->values.pll.system = |
| MINFO->values.pll.video = 284000; |
| MINFO->values.reg.opt = 0x404A1160; |
| MINFO->values.reg.opt2 = 0x0000AC00; |
| MINFO->values.reg.opt3 = 0x0090A409; |
| MINFO->values.reg.mctlwtst_core = |
| MINFO->values.reg.mctlwtst = 0x0C81462B; |
| MINFO->values.reg.memmisc = 0x80000004; |
| MINFO->values.reg.memrdbk = 0x01001103; |
| MINFO->features.pll.ref_freq = 27000; |
| MINFO->values.memory.ddr = 1; |
| MINFO->values.memory.dll = 1; |
| MINFO->values.memory.emrswen = 1; |
| MINFO->values.reg.maccess = 0x00004000; |
| } |
| |
| static int matroxfb_set_limits(WPMINFO const struct matrox_bios* bd) { |
| unsigned int pins_version; |
| static const unsigned int pinslen[] = { 64, 64, 64, 128, 128 }; |
| |
| switch (ACCESS_FBINFO(chip)) { |
| case MGA_2064: default_pins1(PMINFO2); break; |
| case MGA_2164: |
| case MGA_1064: |
| case MGA_1164: default_pins2(PMINFO2); break; |
| case MGA_G100: |
| case MGA_G200: default_pins3(PMINFO2); break; |
| case MGA_G400: default_pins4(PMINFO2); break; |
| case MGA_G450: |
| case MGA_G550: default_pins5(PMINFO2); break; |
| } |
| if (!bd->bios_valid) { |
| printk(KERN_INFO "matroxfb: Your Matrox device does not have BIOS\n"); |
| return -1; |
| } |
| if (bd->pins_len < 64) { |
| printk(KERN_INFO "matroxfb: BIOS on your Matrox device does not contain powerup info\n"); |
| return -1; |
| } |
| if (bd->pins[0] == 0x2E && bd->pins[1] == 0x41) { |
| pins_version = bd->pins[5]; |
| if (pins_version < 2 || pins_version > 5) { |
| printk(KERN_INFO "matroxfb: Unknown version (%u) of powerup info\n", pins_version); |
| return -1; |
| } |
| } else { |
| pins_version = 1; |
| } |
| if (bd->pins_len != pinslen[pins_version - 1]) { |
| printk(KERN_INFO "matroxfb: Invalid powerup info\n"); |
| return -1; |
| } |
| switch (pins_version) { |
| case 1: |
| return parse_pins1(PMINFO bd); |
| case 2: |
| return parse_pins2(PMINFO bd); |
| case 3: |
| return parse_pins3(PMINFO bd); |
| case 4: |
| return parse_pins4(PMINFO bd); |
| case 5: |
| return parse_pins5(PMINFO bd); |
| default: |
| printk(KERN_DEBUG "matroxfb: Powerup info version %u is not yet supported\n", pins_version); |
| return -1; |
| } |
| } |
| |
| void matroxfb_read_pins(WPMINFO2) { |
| u32 opt; |
| u32 biosbase; |
| u32 fbbase; |
| struct pci_dev* pdev = ACCESS_FBINFO(pcidev); |
| |
| memset(&ACCESS_FBINFO(bios), 0, sizeof(ACCESS_FBINFO(bios))); |
| pci_read_config_dword(pdev, PCI_OPTION_REG, &opt); |
| pci_write_config_dword(pdev, PCI_OPTION_REG, opt | PCI_OPTION_ENABLE_ROM); |
| pci_read_config_dword(pdev, PCI_ROM_ADDRESS, &biosbase); |
| pci_read_config_dword(pdev, ACCESS_FBINFO(devflags.fbResource), &fbbase); |
| pci_write_config_dword(pdev, PCI_ROM_ADDRESS, (fbbase & PCI_ROM_ADDRESS_MASK) | PCI_ROM_ADDRESS_ENABLE); |
| parse_bios(vaddr_va(ACCESS_FBINFO(video).vbase), &ACCESS_FBINFO(bios)); |
| pci_write_config_dword(pdev, PCI_ROM_ADDRESS, biosbase); |
| pci_write_config_dword(pdev, PCI_OPTION_REG, opt); |
| #ifdef CONFIG_X86 |
| if (!ACCESS_FBINFO(bios).bios_valid) { |
| unsigned char __iomem* b; |
| |
| b = ioremap(0x000C0000, 65536); |
| if (!b) { |
| printk(KERN_INFO "matroxfb: Unable to map legacy BIOS\n"); |
| } else { |
| unsigned int ven = readb(b+0x64+0) | (readb(b+0x64+1) << 8); |
| unsigned int dev = readb(b+0x64+2) | (readb(b+0x64+3) << 8); |
| |
| if (ven != pdev->vendor || dev != pdev->device) { |
| printk(KERN_INFO "matroxfb: Legacy BIOS is for %04X:%04X, while this device is %04X:%04X\n", |
| ven, dev, pdev->vendor, pdev->device); |
| } else { |
| parse_bios(b, &ACCESS_FBINFO(bios)); |
| } |
| iounmap(b); |
| } |
| } |
| #endif |
| matroxfb_set_limits(PMINFO &ACCESS_FBINFO(bios)); |
| printk(KERN_INFO "PInS memtype = %u\n", |
| (ACCESS_FBINFO(values).reg.opt & 0x1C00) >> 10); |
| } |
| |
| EXPORT_SYMBOL(matroxfb_DAC_in); |
| EXPORT_SYMBOL(matroxfb_DAC_out); |
| EXPORT_SYMBOL(matroxfb_var2my); |
| EXPORT_SYMBOL(matroxfb_PLL_calcclock); |
| #ifndef CONFIG_FB_MATROX_MULTIHEAD |
| struct matrox_fb_info matroxfb_global_mxinfo; |
| EXPORT_SYMBOL(matroxfb_global_mxinfo); |
| #endif |
| EXPORT_SYMBOL(matroxfb_vgaHWinit); /* DAC1064, Ti3026 */ |
| EXPORT_SYMBOL(matroxfb_vgaHWrestore); /* DAC1064, Ti3026 */ |
| EXPORT_SYMBOL(matroxfb_read_pins); |
| |
| MODULE_AUTHOR("(c) 1999-2002 Petr Vandrovec <vandrove@vc.cvut.cz>"); |
| MODULE_DESCRIPTION("Miscellaneous support for Matrox video cards"); |
| MODULE_LICENSE("GPL"); |