Staging: Add initial release of brcm80211 - Broadcom 802.11n wireless LAN driver.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
diff --git a/drivers/staging/brcm80211/include/bcmsdh.h b/drivers/staging/brcm80211/include/bcmsdh.h
new file mode 100644
index 0000000..551ca57
--- /dev/null
+++ b/drivers/staging/brcm80211/include/bcmsdh.h
@@ -0,0 +1,198 @@
+/*
+ * Copyright (c) 2010 Broadcom Corporation
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
+ * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
+ * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
+ * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _bcmsdh_h_
+#define _bcmsdh_h_
+
+#define BCMSDH_ERROR_VAL 0x0001 /* Error */
+#define BCMSDH_INFO_VAL 0x0002 /* Info */
+extern const uint bcmsdh_msglevel;
+
+#ifdef BCMDBG
+#define BCMSDH_ERROR(x) do { if ((bcmsdh_msglevel & BCMSDH_ERROR_VAL) && net_ratelimit()) printf x; } while (0)
+#define BCMSDH_INFO(x) do { if ((bcmsdh_msglevel & BCMSDH_INFO_VAL) && net_ratelimit()) printf x; } while (0)
+#else /* BCMDBG */
+#define BCMSDH_ERROR(x)
+#define BCMSDH_INFO(x)
+#endif /* BCMDBG */
+
+/* forward declarations */
+typedef struct bcmsdh_info bcmsdh_info_t;
+typedef void (*bcmsdh_cb_fn_t) (void *);
+
+/* Attach and build an interface to the underlying SD host driver.
+ * - Allocates resources (structs, arrays, mem, OS handles, etc) needed by bcmsdh.
+ * - Returns the bcmsdh handle and virtual address base for register access.
+ * The returned handle should be used in all subsequent calls, but the bcmsh
+ * implementation may maintain a single "default" handle (e.g. the first or
+ * most recent one) to enable single-instance implementations to pass NULL.
+ */
+extern bcmsdh_info_t *bcmsdh_attach(osl_t * osh, void *cfghdl, void **regsva,
+ uint irq);
+
+/* Detach - freeup resources allocated in attach */
+extern int bcmsdh_detach(osl_t * osh, void *sdh);
+
+/* Query if SD device interrupts are enabled */
+extern bool bcmsdh_intr_query(void *sdh);
+
+/* Enable/disable SD interrupt */
+extern int bcmsdh_intr_enable(void *sdh);
+extern int bcmsdh_intr_disable(void *sdh);
+
+/* Register/deregister device interrupt handler. */
+extern int bcmsdh_intr_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
+extern int bcmsdh_intr_dereg(void *sdh);
+
+#if defined(BCMDBG)
+/* Query pending interrupt status from the host controller */
+extern bool bcmsdh_intr_pending(void *sdh);
+#endif
+extern int bcmsdh_claim_host_and_lock(void *sdh);
+extern int bcmsdh_release_host_and_unlock(void *sdh);
+
+/* Register a callback to be called if and when bcmsdh detects
+ * device removal. No-op in the case of non-removable/hardwired devices.
+ */
+extern int bcmsdh_devremove_reg(void *sdh, bcmsdh_cb_fn_t fn, void *argh);
+
+/* Access SDIO address space (e.g. CCCR) using CMD52 (single-byte interface).
+ * fn: function number
+ * addr: unmodified SDIO-space address
+ * data: data byte to write
+ * err: pointer to error code (or NULL)
+ */
+extern uint8 bcmsdh_cfg_read(void *sdh, uint func, uint32 addr, int *err);
+extern void bcmsdh_cfg_write(void *sdh, uint func, uint32 addr, uint8 data,
+ int *err);
+
+/* Read/Write 4bytes from/to cfg space */
+extern uint32 bcmsdh_cfg_read_word(void *sdh, uint fnc_num, uint32 addr,
+ int *err);
+extern void bcmsdh_cfg_write_word(void *sdh, uint fnc_num, uint32 addr,
+ uint32 data, int *err);
+
+/* Read CIS content for specified function.
+ * fn: function whose CIS is being requested (0 is common CIS)
+ * cis: pointer to memory location to place results
+ * length: number of bytes to read
+ * Internally, this routine uses the values from the cis base regs (0x9-0xB)
+ * to form an SDIO-space address to read the data from.
+ */
+extern int bcmsdh_cis_read(void *sdh, uint func, uint8 * cis, uint length);
+
+/* Synchronous access to device (client) core registers via CMD53 to F1.
+ * addr: backplane address (i.e. >= regsva from attach)
+ * size: register width in bytes (2 or 4)
+ * data: data for register write
+ */
+extern uint32 bcmsdh_reg_read(void *sdh, uint32 addr, uint size);
+extern uint32 bcmsdh_reg_write(void *sdh, uint32 addr, uint size, uint32 data);
+
+/* Indicate if last reg read/write failed */
+extern bool bcmsdh_regfail(void *sdh);
+
+/* Buffer transfer to/from device (client) core via cmd53.
+ * fn: function number
+ * addr: backplane address (i.e. >= regsva from attach)
+ * flags: backplane width, address increment, sync/async
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * pkt: pointer to packet associated with buf (if any)
+ * complete: callback function for command completion (async only)
+ * handle: handle for completion callback (first arg in callback)
+ * Returns 0 or error code.
+ * NOTE: Async operation is not currently supported.
+ */
+typedef void (*bcmsdh_cmplt_fn_t) (void *handle, int status, bool sync_waiting);
+extern int bcmsdh_send_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 * buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle);
+extern int bcmsdh_recv_buf(void *sdh, uint32 addr, uint fn, uint flags,
+ uint8 * buf, uint nbytes, void *pkt,
+ bcmsdh_cmplt_fn_t complete, void *handle);
+
+/* Flags bits */
+#define SDIO_REQ_4BYTE 0x1 /* Four-byte target (backplane) width (vs. two-byte) */
+#define SDIO_REQ_FIXED 0x2 /* Fixed address (FIFO) (vs. incrementing address) */
+#define SDIO_REQ_ASYNC 0x4 /* Async request (vs. sync request) */
+
+/* Pending (non-error) return code */
+#define BCME_PENDING 1
+
+/* Read/write to memory block (F1, no FIFO) via CMD53 (sync only).
+ * rw: read or write (0/1)
+ * addr: direct SDIO address
+ * buf: pointer to memory data buffer
+ * nbytes: number of bytes to transfer to/from buf
+ * Returns 0 or error code.
+ */
+extern int bcmsdh_rwdata(void *sdh, uint rw, uint32 addr, uint8 * buf,
+ uint nbytes);
+
+/* Issue an abort to the specified function */
+extern int bcmsdh_abort(void *sdh, uint fn);
+
+/* Start SDIO Host Controller communication */
+extern int bcmsdh_start(void *sdh, int stage);
+
+/* Stop SDIO Host Controller communication */
+extern int bcmsdh_stop(void *sdh);
+
+/* Returns the "Device ID" of target device on the SDIO bus. */
+extern int bcmsdh_query_device(void *sdh);
+
+/* Returns the number of IO functions reported by the device */
+extern uint bcmsdh_query_iofnum(void *sdh);
+
+/* Miscellaneous knob tweaker. */
+extern int bcmsdh_iovar_op(void *sdh, const char *name,
+ void *params, int plen, void *arg, int len,
+ bool set);
+
+/* Reset and reinitialize the device */
+extern int bcmsdh_reset(bcmsdh_info_t * sdh);
+
+/* helper functions */
+
+extern void *bcmsdh_get_sdioh(bcmsdh_info_t * sdh);
+
+/* callback functions */
+typedef struct {
+ /* attach to device */
+ void *(*attach) (uint16 vend_id, uint16 dev_id, uint16 bus, uint16 slot,
+ uint16 func, uint bustype, void *regsva, osl_t * osh,
+ void *param);
+ /* detach from device */
+ void (*detach) (void *ch);
+} bcmsdh_driver_t;
+
+/* platform specific/high level functions */
+extern int bcmsdh_register(bcmsdh_driver_t * driver);
+extern void bcmsdh_unregister(void);
+extern bool bcmsdh_chipmatch(uint16 vendor, uint16 device);
+extern void bcmsdh_device_remove(void *sdh);
+
+/* Function to pass device-status bits to DHD. */
+extern uint32 bcmsdh_get_dstatus(void *sdh);
+
+/* Function to return current window addr */
+extern uint32 bcmsdh_cur_sbwad(void *sdh);
+
+/* Function to pass chipid and rev to lower layers for controlling pr's */
+extern void bcmsdh_chipinfo(void *sdh, uint32 chip, uint32 chiprev);
+
+#endif /* _bcmsdh_h_ */