| /* |
| * Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com> |
| * |
| * The LM95245 is a sensor chip made by National Semiconductors. |
| * It reports up to two temperatures (its own plus an external one). |
| * Complete datasheet can be obtained from National's website at: |
| * http://www.national.com/ds.cgi/LM/LM95245.pdf |
| * |
| * This driver is based on lm95241.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/slab.h> |
| #include <linux/jiffies.h> |
| #include <linux/i2c.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/sysfs.h> |
| |
| #define DEVNAME "lm95245" |
| |
| static const unsigned short normal_i2c[] = { |
| 0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END }; |
| |
| /* LM95245 registers */ |
| /* general registers */ |
| #define LM95245_REG_RW_CONFIG1 0x03 |
| #define LM95245_REG_RW_CONVERS_RATE 0x04 |
| #define LM95245_REG_W_ONE_SHOT 0x0F |
| |
| /* diode configuration */ |
| #define LM95245_REG_RW_CONFIG2 0xBF |
| #define LM95245_REG_RW_REMOTE_OFFH 0x11 |
| #define LM95245_REG_RW_REMOTE_OFFL 0x12 |
| |
| /* status registers */ |
| #define LM95245_REG_R_STATUS1 0x02 |
| #define LM95245_REG_R_STATUS2 0x33 |
| |
| /* limit registers */ |
| #define LM95245_REG_RW_REMOTE_OS_LIMIT 0x07 |
| #define LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT 0x20 |
| #define LM95245_REG_RW_REMOTE_TCRIT_LIMIT 0x19 |
| #define LM95245_REG_RW_COMMON_HYSTERESIS 0x21 |
| |
| /* temperature signed */ |
| #define LM95245_REG_R_LOCAL_TEMPH_S 0x00 |
| #define LM95245_REG_R_LOCAL_TEMPL_S 0x30 |
| #define LM95245_REG_R_REMOTE_TEMPH_S 0x01 |
| #define LM95245_REG_R_REMOTE_TEMPL_S 0x10 |
| /* temperature unsigned */ |
| #define LM95245_REG_R_REMOTE_TEMPH_U 0x31 |
| #define LM95245_REG_R_REMOTE_TEMPL_U 0x32 |
| |
| /* id registers */ |
| #define LM95245_REG_R_MAN_ID 0xFE |
| #define LM95245_REG_R_CHIP_ID 0xFF |
| |
| /* LM95245 specific bitfields */ |
| #define CFG_STOP 0x40 |
| #define CFG_REMOTE_TCRIT_MASK 0x10 |
| #define CFG_REMOTE_OS_MASK 0x08 |
| #define CFG_LOCAL_TCRIT_MASK 0x04 |
| #define CFG_LOCAL_OS_MASK 0x02 |
| |
| #define CFG2_OS_A0 0x40 |
| #define CFG2_DIODE_FAULT_OS 0x20 |
| #define CFG2_DIODE_FAULT_TCRIT 0x10 |
| #define CFG2_REMOTE_TT 0x08 |
| #define CFG2_REMOTE_FILTER_DIS 0x00 |
| #define CFG2_REMOTE_FILTER_EN 0x06 |
| |
| /* conversation rate in ms */ |
| #define RATE_CR0063 0x00 |
| #define RATE_CR0364 0x01 |
| #define RATE_CR1000 0x02 |
| #define RATE_CR2500 0x03 |
| |
| #define STATUS1_DIODE_FAULT 0x04 |
| #define STATUS1_RTCRIT 0x02 |
| #define STATUS1_LOC 0x01 |
| |
| #define MANUFACTURER_ID 0x01 |
| #define DEFAULT_REVISION 0xB3 |
| |
| static const u8 lm95245_reg_address[] = { |
| LM95245_REG_R_LOCAL_TEMPH_S, |
| LM95245_REG_R_LOCAL_TEMPL_S, |
| LM95245_REG_R_REMOTE_TEMPH_S, |
| LM95245_REG_R_REMOTE_TEMPL_S, |
| LM95245_REG_R_REMOTE_TEMPH_U, |
| LM95245_REG_R_REMOTE_TEMPL_U, |
| LM95245_REG_RW_LOCAL_OS_TCRIT_LIMIT, |
| LM95245_REG_RW_REMOTE_TCRIT_LIMIT, |
| LM95245_REG_RW_COMMON_HYSTERESIS, |
| LM95245_REG_R_STATUS1, |
| }; |
| |
| /* Client data (each client gets its own) */ |
| struct lm95245_data { |
| struct device *hwmon_dev; |
| struct mutex update_lock; |
| unsigned long last_updated; /* in jiffies */ |
| unsigned long interval; /* in msecs */ |
| bool valid; /* zero until following fields are valid */ |
| /* registers values */ |
| u8 regs[ARRAY_SIZE(lm95245_reg_address)]; |
| u8 config1, config2; |
| }; |
| |
| /* Conversions */ |
| static int temp_from_reg_unsigned(u8 val_h, u8 val_l) |
| { |
| return val_h * 1000 + val_l * 1000 / 256; |
| } |
| |
| static int temp_from_reg_signed(u8 val_h, u8 val_l) |
| { |
| if (val_h & 0x80) |
| return (val_h - 0x100) * 1000; |
| return temp_from_reg_unsigned(val_h, val_l); |
| } |
| |
| static struct lm95245_data *lm95245_update_device(struct device *dev) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| |
| mutex_lock(&data->update_lock); |
| |
| if (time_after(jiffies, data->last_updated |
| + msecs_to_jiffies(data->interval)) || !data->valid) { |
| int i; |
| |
| dev_dbg(&client->dev, "Updating lm95245 data.\n"); |
| for (i = 0; i < ARRAY_SIZE(lm95245_reg_address); i++) |
| data->regs[i] |
| = i2c_smbus_read_byte_data(client, |
| lm95245_reg_address[i]); |
| data->last_updated = jiffies; |
| data->valid = 1; |
| } |
| |
| mutex_unlock(&data->update_lock); |
| |
| return data; |
| } |
| |
| static unsigned long lm95245_read_conversion_rate(struct i2c_client *client) |
| { |
| int rate; |
| unsigned long interval; |
| |
| rate = i2c_smbus_read_byte_data(client, LM95245_REG_RW_CONVERS_RATE); |
| |
| switch (rate) { |
| case RATE_CR0063: |
| interval = 63; |
| break; |
| case RATE_CR0364: |
| interval = 364; |
| break; |
| case RATE_CR1000: |
| interval = 1000; |
| break; |
| case RATE_CR2500: |
| default: |
| interval = 2500; |
| break; |
| } |
| |
| return interval; |
| } |
| |
| static unsigned long lm95245_set_conversion_rate(struct i2c_client *client, |
| unsigned long interval) |
| { |
| int rate; |
| |
| if (interval <= 63) { |
| interval = 63; |
| rate = RATE_CR0063; |
| } else if (interval <= 364) { |
| interval = 364; |
| rate = RATE_CR0364; |
| } else if (interval <= 1000) { |
| interval = 1000; |
| rate = RATE_CR1000; |
| } else { |
| interval = 2500; |
| rate = RATE_CR2500; |
| } |
| |
| i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONVERS_RATE, rate); |
| |
| return interval; |
| } |
| |
| /* Sysfs stuff */ |
| static ssize_t show_input(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95245_data *data = lm95245_update_device(dev); |
| int temp; |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| /* |
| * Index 0 (Local temp) is always signed |
| * Index 2 (Remote temp) has both signed and unsigned data |
| * use signed calculation for remote if signed bit is set |
| */ |
| if (index == 0 || data->regs[index] & 0x80) |
| temp = temp_from_reg_signed(data->regs[index], |
| data->regs[index + 1]); |
| else |
| temp = temp_from_reg_unsigned(data->regs[index + 2], |
| data->regs[index + 3]); |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%d\n", temp); |
| } |
| |
| static ssize_t show_limit(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95245_data *data = lm95245_update_device(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%d\n", |
| data->regs[index] * 1000); |
| } |
| |
| static ssize_t set_limit(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| int index = to_sensor_dev_attr(attr)->index; |
| unsigned long val; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| |
| val /= 1000; |
| |
| val = SENSORS_LIMIT(val, 0, (index == 6 ? 127 : 255)); |
| |
| mutex_lock(&data->update_lock); |
| |
| data->valid = 0; |
| |
| i2c_smbus_write_byte_data(client, lm95245_reg_address[index], val); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t set_crit_hyst(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| unsigned long val; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| |
| val /= 1000; |
| |
| val = SENSORS_LIMIT(val, 0, 31); |
| |
| mutex_lock(&data->update_lock); |
| |
| data->valid = 0; |
| |
| /* shared crit hysteresis */ |
| i2c_smbus_write_byte_data(client, LM95245_REG_RW_COMMON_HYSTERESIS, |
| val); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_type(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| |
| return snprintf(buf, PAGE_SIZE - 1, |
| data->config2 & CFG2_REMOTE_TT ? "1\n" : "2\n"); |
| } |
| |
| static ssize_t set_type(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| unsigned long val; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| if (val != 1 && val != 2) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| |
| if (val == 1) |
| data->config2 |= CFG2_REMOTE_TT; |
| else |
| data->config2 &= ~CFG2_REMOTE_TT; |
| |
| data->valid = 0; |
| |
| i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG2, |
| data->config2); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95245_data *data = lm95245_update_device(dev); |
| int index = to_sensor_dev_attr(attr)->index; |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%d\n", |
| !!(data->regs[9] & index)); |
| } |
| |
| static ssize_t show_interval(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct lm95245_data *data = lm95245_update_device(dev); |
| |
| return snprintf(buf, PAGE_SIZE - 1, "%lu\n", data->interval); |
| } |
| |
| static ssize_t set_interval(struct device *dev, struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct i2c_client *client = to_i2c_client(dev); |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| unsigned long val; |
| |
| if (kstrtoul(buf, 10, &val) < 0) |
| return -EINVAL; |
| |
| mutex_lock(&data->update_lock); |
| |
| data->interval = lm95245_set_conversion_rate(client, val); |
| |
| mutex_unlock(&data->update_lock); |
| |
| return count; |
| } |
| |
| static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0); |
| static SENSOR_DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, show_limit, |
| set_limit, 6); |
| static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, show_limit, |
| set_crit_hyst, 8); |
| static SENSOR_DEVICE_ATTR(temp1_crit_alarm, S_IRUGO, show_alarm, NULL, |
| STATUS1_LOC); |
| |
| static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2); |
| static SENSOR_DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_limit, |
| set_limit, 7); |
| static SENSOR_DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_limit, |
| set_crit_hyst, 8); |
| static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, |
| STATUS1_RTCRIT); |
| static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, |
| set_type, 0); |
| static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, |
| STATUS1_DIODE_FAULT); |
| |
| static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval, |
| set_interval); |
| |
| static struct attribute *lm95245_attributes[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_input.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit_hyst.dev_attr.attr, |
| &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, |
| &sensor_dev_attr_temp2_type.dev_attr.attr, |
| &sensor_dev_attr_temp2_fault.dev_attr.attr, |
| &dev_attr_update_interval.attr, |
| NULL |
| }; |
| |
| static const struct attribute_group lm95245_group = { |
| .attrs = lm95245_attributes, |
| }; |
| |
| /* Return 0 if detection is successful, -ENODEV otherwise */ |
| static int lm95245_detect(struct i2c_client *new_client, |
| struct i2c_board_info *info) |
| { |
| struct i2c_adapter *adapter = new_client->adapter; |
| |
| if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) |
| return -ENODEV; |
| |
| if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID) |
| != MANUFACTURER_ID |
| || i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID) |
| != DEFAULT_REVISION) |
| return -ENODEV; |
| |
| strlcpy(info->type, DEVNAME, I2C_NAME_SIZE); |
| return 0; |
| } |
| |
| static void lm95245_init_client(struct i2c_client *client) |
| { |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| |
| data->valid = 0; |
| data->interval = lm95245_read_conversion_rate(client); |
| |
| data->config1 = i2c_smbus_read_byte_data(client, |
| LM95245_REG_RW_CONFIG1); |
| data->config2 = i2c_smbus_read_byte_data(client, |
| LM95245_REG_RW_CONFIG2); |
| |
| if (data->config1 & CFG_STOP) { |
| /* Clear the standby bit */ |
| data->config1 &= ~CFG_STOP; |
| i2c_smbus_write_byte_data(client, LM95245_REG_RW_CONFIG1, |
| data->config1); |
| } |
| } |
| |
| static int lm95245_probe(struct i2c_client *new_client, |
| const struct i2c_device_id *id) |
| { |
| struct lm95245_data *data; |
| int err; |
| |
| data = devm_kzalloc(&new_client->dev, sizeof(struct lm95245_data), |
| GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| i2c_set_clientdata(new_client, data); |
| mutex_init(&data->update_lock); |
| |
| /* Initialize the LM95245 chip */ |
| lm95245_init_client(new_client); |
| |
| /* Register sysfs hooks */ |
| err = sysfs_create_group(&new_client->dev.kobj, &lm95245_group); |
| if (err) |
| return err; |
| |
| data->hwmon_dev = hwmon_device_register(&new_client->dev); |
| if (IS_ERR(data->hwmon_dev)) { |
| err = PTR_ERR(data->hwmon_dev); |
| goto exit_remove_files; |
| } |
| |
| return 0; |
| |
| exit_remove_files: |
| sysfs_remove_group(&new_client->dev.kobj, &lm95245_group); |
| return err; |
| } |
| |
| static int lm95245_remove(struct i2c_client *client) |
| { |
| struct lm95245_data *data = i2c_get_clientdata(client); |
| |
| hwmon_device_unregister(data->hwmon_dev); |
| sysfs_remove_group(&client->dev.kobj, &lm95245_group); |
| |
| return 0; |
| } |
| |
| /* Driver data (common to all clients) */ |
| static const struct i2c_device_id lm95245_id[] = { |
| { DEVNAME, 0 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, lm95245_id); |
| |
| static struct i2c_driver lm95245_driver = { |
| .class = I2C_CLASS_HWMON, |
| .driver = { |
| .name = DEVNAME, |
| }, |
| .probe = lm95245_probe, |
| .remove = lm95245_remove, |
| .id_table = lm95245_id, |
| .detect = lm95245_detect, |
| .address_list = normal_i2c, |
| }; |
| |
| module_i2c_driver(lm95245_driver); |
| |
| MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>"); |
| MODULE_DESCRIPTION("LM95245 sensor driver"); |
| MODULE_LICENSE("GPL"); |