rtc: at91sam9: use clk API instead of relying on AT91_SLOW_CLOCK
The RTT block is using the slow clock which is accessible through the clk
API.
Use the clk API to retrieve, enable and get the slow clk rate instead of
the AT91_SLOW_CLOCK macro (which hardcodes the slow clk rate).
Doing this allows us to reference the clk thus preventing the CCF from
disabling it during the "disable unused" phase.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Johan Hovold <johan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
diff --git a/drivers/rtc/rtc-at91sam9.c b/drivers/rtc/rtc-at91sam9.c
index be9c28b..abac38a 100644
--- a/drivers/rtc/rtc-at91sam9.c
+++ b/drivers/rtc/rtc-at91sam9.c
@@ -23,6 +23,7 @@
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/clk.h>
/*
* This driver uses two configurable hardware resources that live in the
@@ -61,8 +62,6 @@
#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
-#define AT91_SLOW_CLOCK 32768
-
/*
* We store ALARM_DISABLED in ALMV to record that no alarm is set.
* It's also the reset value for that field.
@@ -77,6 +76,7 @@
struct regmap *gpbr;
unsigned int gpbr_offset;
int irq;
+ struct clk *sclk;
};
#define rtt_readl(rtc, field) \
@@ -328,6 +328,7 @@
struct sam9_rtc *rtc;
int ret, irq;
u32 mr;
+ unsigned int sclk_rate;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
@@ -385,11 +386,27 @@
return -ENOMEM;
}
+ rtc->sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(rtc->sclk))
+ return PTR_ERR(rtc->sclk);
+
+ sclk_rate = clk_get_rate(rtc->sclk);
+ if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
+ dev_err(&pdev->dev, "Invalid slow clock rate\n");
+ return -EINVAL;
+ }
+
+ ret = clk_prepare_enable(rtc->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable slow clock\n");
+ return ret;
+ }
+
mr = rtt_readl(rtc, MR);
/* unless RTT is counting at 1 Hz, re-initialize it */
- if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
- mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
+ if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
+ mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
gpbr_writel(rtc, 0);
}
@@ -434,6 +451,9 @@
/* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
+ if (!IS_ERR(rtc->sclk))
+ clk_disable_unprepare(rtc->sclk);
+
return 0;
}