| / { |
| ocp@f1000000 { |
| pinctrl: pinctrl@10000 { |
| compatible = "marvell,88f6281-pinctrl"; |
| reg = <0x10000 0x20>; |
| |
| pmx_nand: pmx-nand { |
| marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", |
| "mpp4", "mpp5", "mpp18", |
| "mpp19"; |
| marvell,function = "nand"; |
| }; |
| pmx_sata0: pmx-sata0 { |
| marvell,pins = "mpp5", "mpp21", "mpp23"; |
| marvell,function = "sata0"; |
| }; |
| pmx_sata1: pmx-sata1 { |
| marvell,pins = "mpp4", "mpp20", "mpp22"; |
| marvell,function = "sata1"; |
| }; |
| pmx_spi: pmx-spi { |
| marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; |
| marvell,function = "spi"; |
| }; |
| pmx_twsi0: pmx-twsi0 { |
| marvell,pins = "mpp8", "mpp9"; |
| marvell,function = "twsi0"; |
| }; |
| pmx_uart0: pmx-uart0 { |
| marvell,pins = "mpp10", "mpp11"; |
| marvell,function = "uart0"; |
| }; |
| pmx_uart1: pmx-uart1 { |
| marvell,pins = "mpp13", "mpp14"; |
| marvell,function = "uart1"; |
| }; |
| pmx_sdio: pmx-sdio { |
| marvell,pins = "mpp12", "mpp13", "mpp14", |
| "mpp15", "mpp16", "mpp17"; |
| marvell,function = "sdio"; |
| }; |
| }; |
| |
| pcie-controller { |
| compatible = "marvell,kirkwood-pcie"; |
| status = "disabled"; |
| device_type = "pci"; |
| |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| bus-range = <0x00 0xff>; |
| |
| ranges = <0x82000000 0 0x00040000 0x00040000 0 0x00002000 /* Port 0.0 registers */ |
| 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */ |
| 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */ |
| |
| pcie@1,0 { |
| device_type = "pci"; |
| assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; |
| reg = <0x0800 0 0 0 0>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| ranges; |
| interrupt-map-mask = <0 0 0 0>; |
| interrupt-map = <0 0 0 0 &intc 9>; |
| marvell,pcie-port = <0>; |
| marvell,pcie-lane = <0>; |
| clocks = <&gate_clk 2>; |
| status = "disabled"; |
| }; |
| }; |
| |
| rtc@10300 { |
| compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; |
| reg = <0x10300 0x20>; |
| interrupts = <53>; |
| clocks = <&gate_clk 7>; |
| }; |
| |
| sata@80000 { |
| compatible = "marvell,orion-sata"; |
| reg = <0x80000 0x5000>; |
| interrupts = <21>; |
| clocks = <&gate_clk 14>, <&gate_clk 15>; |
| clock-names = "0", "1"; |
| status = "disabled"; |
| }; |
| |
| mvsdio@90000 { |
| compatible = "marvell,orion-sdio"; |
| reg = <0x90000 0x200>; |
| interrupts = <28>; |
| clocks = <&gate_clk 4>; |
| bus-width = <4>; |
| cap-sdio-irq; |
| cap-sd-highspeed; |
| cap-mmc-highspeed; |
| status = "disabled"; |
| }; |
| }; |
| }; |