ASoC: Rename WM8915 to WM8996
For marketing reasons the part will be called WM8996. In order to avoid
user confusion rename the driver to reflect this.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Acked-by: Liam Girdwood <lrg@ti.com>
diff --git a/sound/soc/samsung/speyside.c b/sound/soc/samsung/speyside.c
index d6dee4d..590e927 100644
--- a/sound/soc/samsung/speyside.c
+++ b/sound/soc/samsung/speyside.c
@@ -14,10 +14,10 @@
#include <sound/jack.h>
#include <linux/gpio.h>
-#include "../codecs/wm8915.h"
+#include "../codecs/wm8996.h"
#include "../codecs/wm9081.h"
-#define WM8915_HPSEL_GPIO 214
+#define WM8996_HPSEL_GPIO 214
static int speyside_set_bias_level(struct snd_soc_card *card,
struct snd_soc_dapm_context *dapm,
@@ -31,12 +31,12 @@
switch (level) {
case SND_SOC_BIAS_STANDBY:
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8915_SYSCLK_MCLK2,
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8996_SYSCLK_MCLK2,
32768, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
- ret = snd_soc_dai_set_pll(codec_dai, WM8915_FLL_MCLK2,
+ ret = snd_soc_dai_set_pll(codec_dai, WM8996_FLL_MCLK2,
0, 0, 0);
if (ret < 0) {
pr_err("Failed to stop FLL\n");
@@ -65,7 +65,7 @@
case SND_SOC_BIAS_PREPARE:
if (card->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
ret = snd_soc_dai_set_pll(codec_dai, 0,
- WM8915_FLL_MCLK2,
+ WM8996_FLL_MCLK2,
32768, 48000 * 256);
if (ret < 0) {
pr_err("Failed to start FLL\n");
@@ -73,7 +73,7 @@
}
ret = snd_soc_dai_set_sysclk(codec_dai,
- WM8915_SYSCLK_FLL,
+ WM8996_SYSCLK_FLL,
48000 * 256,
SND_SOC_CLOCK_IN);
if (ret < 0)
@@ -149,26 +149,26 @@
int polarity)
{
speyside_jack_polarity = !polarity;
- gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);
+ gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
/* Re-run DAPM to make sure we're using the correct mic bias */
snd_soc_dapm_sync(&codec->dapm);
}
-static int speyside_wm8915_init(struct snd_soc_pcm_runtime *rtd)
+static int speyside_wm8996_init(struct snd_soc_pcm_runtime *rtd)
{
struct snd_soc_dai *dai = rtd->codec_dai;
struct snd_soc_codec *codec = rtd->codec;
int ret;
- ret = snd_soc_dai_set_sysclk(dai, WM8915_SYSCLK_MCLK2, 32768, 0);
+ ret = snd_soc_dai_set_sysclk(dai, WM8996_SYSCLK_MCLK2, 32768, 0);
if (ret < 0)
return ret;
- ret = gpio_request(WM8915_HPSEL_GPIO, "HP_SEL");
+ ret = gpio_request(WM8996_HPSEL_GPIO, "HP_SEL");
if (ret != 0)
pr_err("Failed to request HP_SEL GPIO: %d\n", ret);
- gpio_direction_output(WM8915_HPSEL_GPIO, speyside_jack_polarity);
+ gpio_direction_output(WM8996_HPSEL_GPIO, speyside_jack_polarity);
ret = snd_soc_jack_new(codec, "Headset",
SND_JACK_HEADSET | SND_JACK_BTN_0,
@@ -182,7 +182,7 @@
if (ret)
return ret;
- wm8915_detect(codec, &speyside_headset, speyside_set_polarity);
+ wm8996_detect(codec, &speyside_headset, speyside_set_polarity);
return 0;
}
@@ -205,16 +205,16 @@
.name = "CPU",
.stream_name = "CPU",
.cpu_dai_name = "samsung-i2s.0",
- .codec_dai_name = "wm8915-aif1",
+ .codec_dai_name = "wm8996-aif1",
.platform_name = "samsung-audio",
- .codec_name = "wm8915.1-001a",
- .init = speyside_wm8915_init,
+ .codec_name = "wm8996.1-001a",
+ .init = speyside_wm8996_init,
.ops = &speyside_ops,
},
{
.name = "Baseband",
.stream_name = "Baseband",
- .cpu_dai_name = "wm8915-aif2",
+ .cpu_dai_name = "wm8996-aif2",
.codec_dai_name = "wm1250-ev1",
.codec_name = "wm1250-ev1.1-0027",
.ops = &speyside_ops,