Merge tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fixes from Bjorn Helgaas:
 "Yinghai fixed a couple regressions: one resource assignment problem
  introduced in v3.10 that showed up with SR-IOV on powerpc, and another
  SR-IOV hot-remove issue related to refcounting changes we merged for
  v3.11.

  Yinghai is still working on another SR-IOV-related fix or two, which
  will be simpler if pciehp is non-modular, so I included the Kconfig
  changes now to get them in earlier.

  Finally, a minor fix for the ARM Marvell EBU host bridge driver that
  was merged for v3.11

  Hotplug:
      PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
      PCI: hotplug: Convert to be builtin only, not modular
      PCI: pciehp: Convert pciehp to be builtin only, not modular

  Resource allocation:
      PCI: Retry allocation of only the resource type that failed

  ARM:
      PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge"

* tag 'pci-v3.11-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Disable prefetchable memory support in PCI-to-PCI bridge
  PCI: Retry allocation of only the resource type that failed
  PCI: pciehp: Convert pciehp to be builtin only, not modular
  PCI: hotplug: Convert to be builtin only, not modular
  PCI: pciehp: Fix null pointer deref when hot-removing SR-IOV device
diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig
index 7913695..efbd292 100644
--- a/arch/ia64/configs/generic_defconfig
+++ b/arch/ia64/configs/generic_defconfig
@@ -31,7 +31,7 @@
 CONFIG_ACPI_DOCK=y
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/ia64/configs/gensparse_defconfig b/arch/ia64/configs/gensparse_defconfig
index f8e9133..f64980d 100644
--- a/arch/ia64/configs/gensparse_defconfig
+++ b/arch/ia64/configs/gensparse_defconfig
@@ -25,7 +25,7 @@
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig
index a5a9e02..0f4e9e4 100644
--- a/arch/ia64/configs/tiger_defconfig
+++ b/arch/ia64/configs/tiger_defconfig
@@ -31,7 +31,7 @@
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/ia64/configs/xen_domu_defconfig b/arch/ia64/configs/xen_domu_defconfig
index 37b9b42..b025acf 100644
--- a/arch/ia64/configs/xen_domu_defconfig
+++ b/arch/ia64/configs/xen_domu_defconfig
@@ -32,7 +32,7 @@
 CONFIG_ACPI_FAN=m
 CONFIG_ACPI_PROCESSOR=m
 CONFIG_ACPI_CONTAINER=m
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_ACPI=m
 CONFIG_PACKET=y
 CONFIG_UNIX=y
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index c86fcb9..0e8cfd0 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -58,7 +58,7 @@
 CONFIG_PPC_DENORMALISATION=y
 CONFIG_PCCARD=y
 CONFIG_ELECTRA_CF=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PACKET=y
diff --git a/arch/powerpc/configs/ppc64e_defconfig b/arch/powerpc/configs/ppc64e_defconfig
index 4b20f76..0085dc4 100644
--- a/arch/powerpc/configs/ppc64e_defconfig
+++ b/arch/powerpc/configs/ppc64e_defconfig
@@ -32,7 +32,7 @@
 CONFIG_SPARSEMEM_MANUAL=y
 CONFIG_PCI_MSI=y
 CONFIG_PCCARD=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=m
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index bea8587..1d4b976 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -53,7 +53,7 @@
 CONFIG_PPC_SUBPAGE_PROT=y
 CONFIG_SCHED_SMT=y
 CONFIG_PPC_DENORMALISATION=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_HOTPLUG_PCI_RPA=m
 CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
 CONFIG_PACKET=y
diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig
index 2051821..0cf4097 100644
--- a/arch/sh/configs/sh03_defconfig
+++ b/arch/sh/configs/sh03_defconfig
@@ -22,7 +22,7 @@
 CONFIG_CMDLINE_OVERWRITE=y
 CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs"
 CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI=m
+CONFIG_HOTPLUG_PCI=y
 CONFIG_BINFMT_MISC=y
 CONFIG_NET=y
 CONFIG_PACKET=y
diff --git a/drivers/pci/host/pci-mvebu.c b/drivers/pci/host/pci-mvebu.c
index 13a633b..7bf3926 100644
--- a/drivers/pci/host/pci-mvebu.c
+++ b/drivers/pci/host/pci-mvebu.c
@@ -86,10 +86,6 @@
 	u16 secondary_status;
 	u16 membase;
 	u16 memlimit;
-	u16 prefmembase;
-	u16 prefmemlimit;
-	u32 prefbaseupper;
-	u32 preflimitupper;
 	u16 iobaseupper;
 	u16 iolimitupper;
 	u8 cappointer;
@@ -419,15 +415,7 @@
 		break;
 
 	case PCI_PREF_MEMORY_BASE:
-		*value = (bridge->prefmemlimit << 16 | bridge->prefmembase);
-		break;
-
-	case PCI_PREF_BASE_UPPER32:
-		*value = bridge->prefbaseupper;
-		break;
-
-	case PCI_PREF_LIMIT_UPPER32:
-		*value = bridge->preflimitupper;
+		*value = 0;
 		break;
 
 	case PCI_IO_BASE_UPPER16:
@@ -501,19 +489,6 @@
 		mvebu_pcie_handle_membase_change(port);
 		break;
 
-	case PCI_PREF_MEMORY_BASE:
-		bridge->prefmembase = value & 0xffff;
-		bridge->prefmemlimit = value >> 16;
-		break;
-
-	case PCI_PREF_BASE_UPPER32:
-		bridge->prefbaseupper = value;
-		break;
-
-	case PCI_PREF_LIMIT_UPPER32:
-		bridge->preflimitupper = value;
-		break;
-
 	case PCI_IO_BASE_UPPER16:
 		bridge->iobaseupper = value & 0xffff;
 		bridge->iolimitupper = value >> 16;
diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig
index bb7ebb2..d85009d 100644
--- a/drivers/pci/hotplug/Kconfig
+++ b/drivers/pci/hotplug/Kconfig
@@ -3,16 +3,13 @@
 #
 
 menuconfig HOTPLUG_PCI
-	tristate "Support for PCI Hotplug"
+	bool "Support for PCI Hotplug"
 	depends on PCI && SYSFS
 	---help---
 	  Say Y here if you have a motherboard with a PCI Hotplug controller.
 	  This allows you to add and remove PCI cards while the machine is
 	  powered up and running.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called pci_hotplug.
-
 	  When in doubt, say N.
 
 if HOTPLUG_PCI
diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index aac7a40..0e0d0f7 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -92,7 +92,14 @@
 	if (ret)
 		presence = 0;
 
-	list_for_each_entry_safe(dev, temp, &parent->devices, bus_list) {
+	/*
+	 * Stopping an SR-IOV PF device removes all the associated VFs,
+	 * which will update the bus->devices list and confuse the
+	 * iterator.  Therefore, iterate in reverse so we remove the VFs
+	 * first, then the PF.  We do the same in pci_stop_bus_device().
+	 */
+	list_for_each_entry_safe_reverse(dev, temp, &parent->devices,
+					 bus_list) {
 		pci_dev_get(dev);
 		if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE && presence) {
 			pci_read_config_byte(dev, PCI_BRIDGE_CONTROL, &bctl);
diff --git a/drivers/pci/pcie/Kconfig b/drivers/pci/pcie/Kconfig
index 569f82f..3b94cfc 100644
--- a/drivers/pci/pcie/Kconfig
+++ b/drivers/pci/pcie/Kconfig
@@ -14,15 +14,12 @@
 # Include service Kconfig here
 #
 config HOTPLUG_PCI_PCIE
-	tristate "PCI Express Hotplug driver"
+	bool "PCI Express Hotplug driver"
 	depends on HOTPLUG_PCI && PCIEPORTBUS
 	help
 	  Say Y here if you have a motherboard that supports PCI Express Native
 	  Hotplug
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called pciehp.
-
 	  When in doubt, say N.
 
 source "drivers/pci/pcie/aer/Kconfig"
diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
index d254e23..64a7de2 100644
--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -300,6 +300,47 @@
 	}
 }
 
+static unsigned long pci_fail_res_type_mask(struct list_head *fail_head)
+{
+	struct pci_dev_resource *fail_res;
+	unsigned long mask = 0;
+
+	/* check failed type */
+	list_for_each_entry(fail_res, fail_head, list)
+		mask |= fail_res->flags;
+
+	/*
+	 * one pref failed resource will set IORESOURCE_MEM,
+	 * as we can allocate pref in non-pref range.
+	 * Will release all assigned non-pref sibling resources
+	 * according to that bit.
+	 */
+	return mask & (IORESOURCE_IO | IORESOURCE_MEM | IORESOURCE_PREFETCH);
+}
+
+static bool pci_need_to_release(unsigned long mask, struct resource *res)
+{
+	if (res->flags & IORESOURCE_IO)
+		return !!(mask & IORESOURCE_IO);
+
+	/* check pref at first */
+	if (res->flags & IORESOURCE_PREFETCH) {
+		if (mask & IORESOURCE_PREFETCH)
+			return true;
+		/* count pref if its parent is non-pref */
+		else if ((mask & IORESOURCE_MEM) &&
+			 !(res->parent->flags & IORESOURCE_PREFETCH))
+			return true;
+		else
+			return false;
+	}
+
+	if (res->flags & IORESOURCE_MEM)
+		return !!(mask & IORESOURCE_MEM);
+
+	return false;	/* should not get here */
+}
+
 static void __assign_resources_sorted(struct list_head *head,
 				 struct list_head *realloc_head,
 				 struct list_head *fail_head)
@@ -312,11 +353,24 @@
 	 *  if could do that, could get out early.
 	 *  if could not do that, we still try to assign requested at first,
 	 *    then try to reassign add_size for some resources.
+	 *
+	 * Separate three resource type checking if we need to release
+	 * assigned resource after requested + add_size try.
+	 *	1. if there is io port assign fail, will release assigned
+	 *	   io port.
+	 *	2. if there is pref mmio assign fail, release assigned
+	 *	   pref mmio.
+	 *	   if assigned pref mmio's parent is non-pref mmio and there
+	 *	   is non-pref mmio assign fail, will release that assigned
+	 *	   pref mmio.
+	 *	3. if there is non-pref mmio assign fail or pref mmio
+	 *	   assigned fail, will release assigned non-pref mmio.
 	 */
 	LIST_HEAD(save_head);
 	LIST_HEAD(local_fail_head);
 	struct pci_dev_resource *save_res;
-	struct pci_dev_resource *dev_res;
+	struct pci_dev_resource *dev_res, *tmp_res;
+	unsigned long fail_type;
 
 	/* Check if optional add_size is there */
 	if (!realloc_head || list_empty(realloc_head))
@@ -348,6 +402,19 @@
 		return;
 	}
 
+	/* check failed type */
+	fail_type = pci_fail_res_type_mask(&local_fail_head);
+	/* remove not need to be released assigned res from head list etc */
+	list_for_each_entry_safe(dev_res, tmp_res, head, list)
+		if (dev_res->res->parent &&
+		    !pci_need_to_release(fail_type, dev_res->res)) {
+			/* remove it from realloc_head list */
+			remove_from_list(realloc_head, dev_res->res);
+			remove_from_list(&save_head, dev_res->res);
+			list_del(&dev_res->list);
+			kfree(dev_res);
+		}
+
 	free_list(&local_fail_head);
 	/* Release assigned resource */
 	list_for_each_entry(dev_res, head, list)