| /* |
| * SLUB: A slab allocator that limits cache line use instead of queuing |
| * objects in per cpu and per node lists. |
| * |
| * The allocator synchronizes using per slab locks and only |
| * uses a centralized lock to manage a pool of partial slabs. |
| * |
| * (C) 2007 SGI, Christoph Lameter |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/swap.h> /* struct reclaim_state */ |
| #include <linux/module.h> |
| #include <linux/bit_spinlock.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/proc_fs.h> |
| #include <linux/seq_file.h> |
| #include <linux/kmemtrace.h> |
| #include <linux/kmemcheck.h> |
| #include <linux/cpu.h> |
| #include <linux/cpuset.h> |
| #include <linux/mempolicy.h> |
| #include <linux/ctype.h> |
| #include <linux/debugobjects.h> |
| #include <linux/kallsyms.h> |
| #include <linux/memory.h> |
| #include <linux/math64.h> |
| #include <linux/fault-inject.h> |
| |
| /* |
| * Lock order: |
| * 1. slab_lock(page) |
| * 2. slab->list_lock |
| * |
| * The slab_lock protects operations on the object of a particular |
| * slab and its metadata in the page struct. If the slab lock |
| * has been taken then no allocations nor frees can be performed |
| * on the objects in the slab nor can the slab be added or removed |
| * from the partial or full lists since this would mean modifying |
| * the page_struct of the slab. |
| * |
| * The list_lock protects the partial and full list on each node and |
| * the partial slab counter. If taken then no new slabs may be added or |
| * removed from the lists nor make the number of partial slabs be modified. |
| * (Note that the total number of slabs is an atomic value that may be |
| * modified without taking the list lock). |
| * |
| * The list_lock is a centralized lock and thus we avoid taking it as |
| * much as possible. As long as SLUB does not have to handle partial |
| * slabs, operations can continue without any centralized lock. F.e. |
| * allocating a long series of objects that fill up slabs does not require |
| * the list lock. |
| * |
| * The lock order is sometimes inverted when we are trying to get a slab |
| * off a list. We take the list_lock and then look for a page on the list |
| * to use. While we do that objects in the slabs may be freed. We can |
| * only operate on the slab if we have also taken the slab_lock. So we use |
| * a slab_trylock() on the slab. If trylock was successful then no frees |
| * can occur anymore and we can use the slab for allocations etc. If the |
| * slab_trylock() does not succeed then frees are in progress in the slab and |
| * we must stay away from it for a while since we may cause a bouncing |
| * cacheline if we try to acquire the lock. So go onto the next slab. |
| * If all pages are busy then we may allocate a new slab instead of reusing |
| * a partial slab. A new slab has noone operating on it and thus there is |
| * no danger of cacheline contention. |
| * |
| * Interrupts are disabled during allocation and deallocation in order to |
| * make the slab allocator safe to use in the context of an irq. In addition |
| * interrupts are disabled to ensure that the processor does not change |
| * while handling per_cpu slabs, due to kernel preemption. |
| * |
| * SLUB assigns one slab for allocation to each processor. |
| * Allocations only occur from these slabs called cpu slabs. |
| * |
| * Slabs with free elements are kept on a partial list and during regular |
| * operations no list for full slabs is used. If an object in a full slab is |
| * freed then the slab will show up again on the partial lists. |
| * We track full slabs for debugging purposes though because otherwise we |
| * cannot scan all objects. |
| * |
| * Slabs are freed when they become empty. Teardown and setup is |
| * minimal so we rely on the page allocators per cpu caches for |
| * fast frees and allocs. |
| * |
| * Overloading of page flags that are otherwise used for LRU management. |
| * |
| * PageActive The slab is frozen and exempt from list processing. |
| * This means that the slab is dedicated to a purpose |
| * such as satisfying allocations for a specific |
| * processor. Objects may be freed in the slab while |
| * it is frozen but slab_free will then skip the usual |
| * list operations. It is up to the processor holding |
| * the slab to integrate the slab into the slab lists |
| * when the slab is no longer needed. |
| * |
| * One use of this flag is to mark slabs that are |
| * used for allocations. Then such a slab becomes a cpu |
| * slab. The cpu slab may be equipped with an additional |
| * freelist that allows lockless access to |
| * free objects in addition to the regular freelist |
| * that requires the slab lock. |
| * |
| * PageError Slab requires special handling due to debug |
| * options set. This moves slab handling out of |
| * the fast path and disables lockless freelists. |
| */ |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| #define SLABDEBUG 1 |
| #else |
| #define SLABDEBUG 0 |
| #endif |
| |
| /* |
| * Issues still to be resolved: |
| * |
| * - Support PAGE_ALLOC_DEBUG. Should be easy to do. |
| * |
| * - Variable sizing of the per node arrays |
| */ |
| |
| /* Enable to test recovery from slab corruption on boot */ |
| #undef SLUB_RESILIENCY_TEST |
| |
| /* |
| * Mininum number of partial slabs. These will be left on the partial |
| * lists even if they are empty. kmem_cache_shrink may reclaim them. |
| */ |
| #define MIN_PARTIAL 5 |
| |
| /* |
| * Maximum number of desirable partial slabs. |
| * The existence of more partial slabs makes kmem_cache_shrink |
| * sort the partial list by the number of objects in the. |
| */ |
| #define MAX_PARTIAL 10 |
| |
| #define DEBUG_DEFAULT_FLAGS (SLAB_DEBUG_FREE | SLAB_RED_ZONE | \ |
| SLAB_POISON | SLAB_STORE_USER) |
| |
| /* |
| * Debugging flags that require metadata to be stored in the slab. These get |
| * disabled when slub_debug=O is used and a cache's min order increases with |
| * metadata. |
| */ |
| #define DEBUG_METADATA_FLAGS (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER) |
| |
| /* |
| * Set of flags that will prevent slab merging |
| */ |
| #define SLUB_NEVER_MERGE (SLAB_RED_ZONE | SLAB_POISON | SLAB_STORE_USER | \ |
| SLAB_TRACE | SLAB_DESTROY_BY_RCU | SLAB_NOLEAKTRACE) |
| |
| #define SLUB_MERGE_SAME (SLAB_DEBUG_FREE | SLAB_RECLAIM_ACCOUNT | \ |
| SLAB_CACHE_DMA | SLAB_NOTRACK) |
| |
| #ifndef ARCH_KMALLOC_MINALIGN |
| #define ARCH_KMALLOC_MINALIGN __alignof__(unsigned long long) |
| #endif |
| |
| #ifndef ARCH_SLAB_MINALIGN |
| #define ARCH_SLAB_MINALIGN __alignof__(unsigned long long) |
| #endif |
| |
| #define OO_SHIFT 16 |
| #define OO_MASK ((1 << OO_SHIFT) - 1) |
| #define MAX_OBJS_PER_PAGE 65535 /* since page.objects is u16 */ |
| |
| /* Internal SLUB flags */ |
| #define __OBJECT_POISON 0x80000000 /* Poison object */ |
| #define __SYSFS_ADD_DEFERRED 0x40000000 /* Not yet visible via sysfs */ |
| |
| static int kmem_size = sizeof(struct kmem_cache); |
| |
| #ifdef CONFIG_SMP |
| static struct notifier_block slab_notifier; |
| #endif |
| |
| static enum { |
| DOWN, /* No slab functionality available */ |
| PARTIAL, /* kmem_cache_open() works but kmalloc does not */ |
| UP, /* Everything works but does not show up in sysfs */ |
| SYSFS /* Sysfs up */ |
| } slab_state = DOWN; |
| |
| /* A list of all slab caches on the system */ |
| static DECLARE_RWSEM(slub_lock); |
| static LIST_HEAD(slab_caches); |
| |
| /* |
| * Tracking user of a slab. |
| */ |
| struct track { |
| unsigned long addr; /* Called from address */ |
| int cpu; /* Was running on cpu */ |
| int pid; /* Pid context */ |
| unsigned long when; /* When did the operation occur */ |
| }; |
| |
| enum track_item { TRACK_ALLOC, TRACK_FREE }; |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| static int sysfs_slab_add(struct kmem_cache *); |
| static int sysfs_slab_alias(struct kmem_cache *, const char *); |
| static void sysfs_slab_remove(struct kmem_cache *); |
| |
| #else |
| static inline int sysfs_slab_add(struct kmem_cache *s) { return 0; } |
| static inline int sysfs_slab_alias(struct kmem_cache *s, const char *p) |
| { return 0; } |
| static inline void sysfs_slab_remove(struct kmem_cache *s) |
| { |
| kfree(s); |
| } |
| |
| #endif |
| |
| static inline void stat(struct kmem_cache_cpu *c, enum stat_item si) |
| { |
| #ifdef CONFIG_SLUB_STATS |
| c->stat[si]++; |
| #endif |
| } |
| |
| /******************************************************************** |
| * Core slab cache functions |
| *******************************************************************/ |
| |
| int slab_is_available(void) |
| { |
| return slab_state >= UP; |
| } |
| |
| static inline struct kmem_cache_node *get_node(struct kmem_cache *s, int node) |
| { |
| #ifdef CONFIG_NUMA |
| return s->node[node]; |
| #else |
| return &s->local_node; |
| #endif |
| } |
| |
| static inline struct kmem_cache_cpu *get_cpu_slab(struct kmem_cache *s, int cpu) |
| { |
| #ifdef CONFIG_SMP |
| return s->cpu_slab[cpu]; |
| #else |
| return &s->cpu_slab; |
| #endif |
| } |
| |
| /* Verify that a pointer has an address that is valid within a slab page */ |
| static inline int check_valid_pointer(struct kmem_cache *s, |
| struct page *page, const void *object) |
| { |
| void *base; |
| |
| if (!object) |
| return 1; |
| |
| base = page_address(page); |
| if (object < base || object >= base + page->objects * s->size || |
| (object - base) % s->size) { |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| /* |
| * Slow version of get and set free pointer. |
| * |
| * This version requires touching the cache lines of kmem_cache which |
| * we avoid to do in the fast alloc free paths. There we obtain the offset |
| * from the page struct. |
| */ |
| static inline void *get_freepointer(struct kmem_cache *s, void *object) |
| { |
| return *(void **)(object + s->offset); |
| } |
| |
| static inline void set_freepointer(struct kmem_cache *s, void *object, void *fp) |
| { |
| *(void **)(object + s->offset) = fp; |
| } |
| |
| /* Loop over all objects in a slab */ |
| #define for_each_object(__p, __s, __addr, __objects) \ |
| for (__p = (__addr); __p < (__addr) + (__objects) * (__s)->size;\ |
| __p += (__s)->size) |
| |
| /* Scan freelist */ |
| #define for_each_free_object(__p, __s, __free) \ |
| for (__p = (__free); __p; __p = get_freepointer((__s), __p)) |
| |
| /* Determine object index from a given position */ |
| static inline int slab_index(void *p, struct kmem_cache *s, void *addr) |
| { |
| return (p - addr) / s->size; |
| } |
| |
| static inline struct kmem_cache_order_objects oo_make(int order, |
| unsigned long size) |
| { |
| struct kmem_cache_order_objects x = { |
| (order << OO_SHIFT) + (PAGE_SIZE << order) / size |
| }; |
| |
| return x; |
| } |
| |
| static inline int oo_order(struct kmem_cache_order_objects x) |
| { |
| return x.x >> OO_SHIFT; |
| } |
| |
| static inline int oo_objects(struct kmem_cache_order_objects x) |
| { |
| return x.x & OO_MASK; |
| } |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| /* |
| * Debug settings: |
| */ |
| #ifdef CONFIG_SLUB_DEBUG_ON |
| static int slub_debug = DEBUG_DEFAULT_FLAGS; |
| #else |
| static int slub_debug; |
| #endif |
| |
| static char *slub_debug_slabs; |
| static int disable_higher_order_debug; |
| |
| /* |
| * Object debugging |
| */ |
| static void print_section(char *text, u8 *addr, unsigned int length) |
| { |
| int i, offset; |
| int newline = 1; |
| char ascii[17]; |
| |
| ascii[16] = 0; |
| |
| for (i = 0; i < length; i++) { |
| if (newline) { |
| printk(KERN_ERR "%8s 0x%p: ", text, addr + i); |
| newline = 0; |
| } |
| printk(KERN_CONT " %02x", addr[i]); |
| offset = i % 16; |
| ascii[offset] = isgraph(addr[i]) ? addr[i] : '.'; |
| if (offset == 15) { |
| printk(KERN_CONT " %s\n", ascii); |
| newline = 1; |
| } |
| } |
| if (!newline) { |
| i %= 16; |
| while (i < 16) { |
| printk(KERN_CONT " "); |
| ascii[i] = ' '; |
| i++; |
| } |
| printk(KERN_CONT " %s\n", ascii); |
| } |
| } |
| |
| static struct track *get_track(struct kmem_cache *s, void *object, |
| enum track_item alloc) |
| { |
| struct track *p; |
| |
| if (s->offset) |
| p = object + s->offset + sizeof(void *); |
| else |
| p = object + s->inuse; |
| |
| return p + alloc; |
| } |
| |
| static void set_track(struct kmem_cache *s, void *object, |
| enum track_item alloc, unsigned long addr) |
| { |
| struct track *p = get_track(s, object, alloc); |
| |
| if (addr) { |
| p->addr = addr; |
| p->cpu = smp_processor_id(); |
| p->pid = current->pid; |
| p->when = jiffies; |
| } else |
| memset(p, 0, sizeof(struct track)); |
| } |
| |
| static void init_tracking(struct kmem_cache *s, void *object) |
| { |
| if (!(s->flags & SLAB_STORE_USER)) |
| return; |
| |
| set_track(s, object, TRACK_FREE, 0UL); |
| set_track(s, object, TRACK_ALLOC, 0UL); |
| } |
| |
| static void print_track(const char *s, struct track *t) |
| { |
| if (!t->addr) |
| return; |
| |
| printk(KERN_ERR "INFO: %s in %pS age=%lu cpu=%u pid=%d\n", |
| s, (void *)t->addr, jiffies - t->when, t->cpu, t->pid); |
| } |
| |
| static void print_tracking(struct kmem_cache *s, void *object) |
| { |
| if (!(s->flags & SLAB_STORE_USER)) |
| return; |
| |
| print_track("Allocated", get_track(s, object, TRACK_ALLOC)); |
| print_track("Freed", get_track(s, object, TRACK_FREE)); |
| } |
| |
| static void print_page_info(struct page *page) |
| { |
| printk(KERN_ERR "INFO: Slab 0x%p objects=%u used=%u fp=0x%p flags=0x%04lx\n", |
| page, page->objects, page->inuse, page->freelist, page->flags); |
| |
| } |
| |
| static void slab_bug(struct kmem_cache *s, char *fmt, ...) |
| { |
| va_list args; |
| char buf[100]; |
| |
| va_start(args, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, args); |
| va_end(args); |
| printk(KERN_ERR "========================================" |
| "=====================================\n"); |
| printk(KERN_ERR "BUG %s: %s\n", s->name, buf); |
| printk(KERN_ERR "----------------------------------------" |
| "-------------------------------------\n\n"); |
| } |
| |
| static void slab_fix(struct kmem_cache *s, char *fmt, ...) |
| { |
| va_list args; |
| char buf[100]; |
| |
| va_start(args, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, args); |
| va_end(args); |
| printk(KERN_ERR "FIX %s: %s\n", s->name, buf); |
| } |
| |
| static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p) |
| { |
| unsigned int off; /* Offset of last byte */ |
| u8 *addr = page_address(page); |
| |
| print_tracking(s, p); |
| |
| print_page_info(page); |
| |
| printk(KERN_ERR "INFO: Object 0x%p @offset=%tu fp=0x%p\n\n", |
| p, p - addr, get_freepointer(s, p)); |
| |
| if (p > addr + 16) |
| print_section("Bytes b4", p - 16, 16); |
| |
| print_section("Object", p, min_t(unsigned long, s->objsize, PAGE_SIZE)); |
| |
| if (s->flags & SLAB_RED_ZONE) |
| print_section("Redzone", p + s->objsize, |
| s->inuse - s->objsize); |
| |
| if (s->offset) |
| off = s->offset + sizeof(void *); |
| else |
| off = s->inuse; |
| |
| if (s->flags & SLAB_STORE_USER) |
| off += 2 * sizeof(struct track); |
| |
| if (off != s->size) |
| /* Beginning of the filler is the free pointer */ |
| print_section("Padding", p + off, s->size - off); |
| |
| dump_stack(); |
| } |
| |
| static void object_err(struct kmem_cache *s, struct page *page, |
| u8 *object, char *reason) |
| { |
| slab_bug(s, "%s", reason); |
| print_trailer(s, page, object); |
| } |
| |
| static void slab_err(struct kmem_cache *s, struct page *page, char *fmt, ...) |
| { |
| va_list args; |
| char buf[100]; |
| |
| va_start(args, fmt); |
| vsnprintf(buf, sizeof(buf), fmt, args); |
| va_end(args); |
| slab_bug(s, "%s", buf); |
| print_page_info(page); |
| dump_stack(); |
| } |
| |
| static void init_object(struct kmem_cache *s, void *object, int active) |
| { |
| u8 *p = object; |
| |
| if (s->flags & __OBJECT_POISON) { |
| memset(p, POISON_FREE, s->objsize - 1); |
| p[s->objsize - 1] = POISON_END; |
| } |
| |
| if (s->flags & SLAB_RED_ZONE) |
| memset(p + s->objsize, |
| active ? SLUB_RED_ACTIVE : SLUB_RED_INACTIVE, |
| s->inuse - s->objsize); |
| } |
| |
| static u8 *check_bytes(u8 *start, unsigned int value, unsigned int bytes) |
| { |
| while (bytes) { |
| if (*start != (u8)value) |
| return start; |
| start++; |
| bytes--; |
| } |
| return NULL; |
| } |
| |
| static void restore_bytes(struct kmem_cache *s, char *message, u8 data, |
| void *from, void *to) |
| { |
| slab_fix(s, "Restoring 0x%p-0x%p=0x%x\n", from, to - 1, data); |
| memset(from, data, to - from); |
| } |
| |
| static int check_bytes_and_report(struct kmem_cache *s, struct page *page, |
| u8 *object, char *what, |
| u8 *start, unsigned int value, unsigned int bytes) |
| { |
| u8 *fault; |
| u8 *end; |
| |
| fault = check_bytes(start, value, bytes); |
| if (!fault) |
| return 1; |
| |
| end = start + bytes; |
| while (end > fault && end[-1] == value) |
| end--; |
| |
| slab_bug(s, "%s overwritten", what); |
| printk(KERN_ERR "INFO: 0x%p-0x%p. First byte 0x%x instead of 0x%x\n", |
| fault, end - 1, fault[0], value); |
| print_trailer(s, page, object); |
| |
| restore_bytes(s, what, value, fault, end); |
| return 0; |
| } |
| |
| /* |
| * Object layout: |
| * |
| * object address |
| * Bytes of the object to be managed. |
| * If the freepointer may overlay the object then the free |
| * pointer is the first word of the object. |
| * |
| * Poisoning uses 0x6b (POISON_FREE) and the last byte is |
| * 0xa5 (POISON_END) |
| * |
| * object + s->objsize |
| * Padding to reach word boundary. This is also used for Redzoning. |
| * Padding is extended by another word if Redzoning is enabled and |
| * objsize == inuse. |
| * |
| * We fill with 0xbb (RED_INACTIVE) for inactive objects and with |
| * 0xcc (RED_ACTIVE) for objects in use. |
| * |
| * object + s->inuse |
| * Meta data starts here. |
| * |
| * A. Free pointer (if we cannot overwrite object on free) |
| * B. Tracking data for SLAB_STORE_USER |
| * C. Padding to reach required alignment boundary or at mininum |
| * one word if debugging is on to be able to detect writes |
| * before the word boundary. |
| * |
| * Padding is done using 0x5a (POISON_INUSE) |
| * |
| * object + s->size |
| * Nothing is used beyond s->size. |
| * |
| * If slabcaches are merged then the objsize and inuse boundaries are mostly |
| * ignored. And therefore no slab options that rely on these boundaries |
| * may be used with merged slabcaches. |
| */ |
| |
| static int check_pad_bytes(struct kmem_cache *s, struct page *page, u8 *p) |
| { |
| unsigned long off = s->inuse; /* The end of info */ |
| |
| if (s->offset) |
| /* Freepointer is placed after the object. */ |
| off += sizeof(void *); |
| |
| if (s->flags & SLAB_STORE_USER) |
| /* We also have user information there */ |
| off += 2 * sizeof(struct track); |
| |
| if (s->size == off) |
| return 1; |
| |
| return check_bytes_and_report(s, page, p, "Object padding", |
| p + off, POISON_INUSE, s->size - off); |
| } |
| |
| /* Check the pad bytes at the end of a slab page */ |
| static int slab_pad_check(struct kmem_cache *s, struct page *page) |
| { |
| u8 *start; |
| u8 *fault; |
| u8 *end; |
| int length; |
| int remainder; |
| |
| if (!(s->flags & SLAB_POISON)) |
| return 1; |
| |
| start = page_address(page); |
| length = (PAGE_SIZE << compound_order(page)); |
| end = start + length; |
| remainder = length % s->size; |
| if (!remainder) |
| return 1; |
| |
| fault = check_bytes(end - remainder, POISON_INUSE, remainder); |
| if (!fault) |
| return 1; |
| while (end > fault && end[-1] == POISON_INUSE) |
| end--; |
| |
| slab_err(s, page, "Padding overwritten. 0x%p-0x%p", fault, end - 1); |
| print_section("Padding", end - remainder, remainder); |
| |
| restore_bytes(s, "slab padding", POISON_INUSE, end - remainder, end); |
| return 0; |
| } |
| |
| static int check_object(struct kmem_cache *s, struct page *page, |
| void *object, int active) |
| { |
| u8 *p = object; |
| u8 *endobject = object + s->objsize; |
| |
| if (s->flags & SLAB_RED_ZONE) { |
| unsigned int red = |
| active ? SLUB_RED_ACTIVE : SLUB_RED_INACTIVE; |
| |
| if (!check_bytes_and_report(s, page, object, "Redzone", |
| endobject, red, s->inuse - s->objsize)) |
| return 0; |
| } else { |
| if ((s->flags & SLAB_POISON) && s->objsize < s->inuse) { |
| check_bytes_and_report(s, page, p, "Alignment padding", |
| endobject, POISON_INUSE, s->inuse - s->objsize); |
| } |
| } |
| |
| if (s->flags & SLAB_POISON) { |
| if (!active && (s->flags & __OBJECT_POISON) && |
| (!check_bytes_and_report(s, page, p, "Poison", p, |
| POISON_FREE, s->objsize - 1) || |
| !check_bytes_and_report(s, page, p, "Poison", |
| p + s->objsize - 1, POISON_END, 1))) |
| return 0; |
| /* |
| * check_pad_bytes cleans up on its own. |
| */ |
| check_pad_bytes(s, page, p); |
| } |
| |
| if (!s->offset && active) |
| /* |
| * Object and freepointer overlap. Cannot check |
| * freepointer while object is allocated. |
| */ |
| return 1; |
| |
| /* Check free pointer validity */ |
| if (!check_valid_pointer(s, page, get_freepointer(s, p))) { |
| object_err(s, page, p, "Freepointer corrupt"); |
| /* |
| * No choice but to zap it and thus lose the remainder |
| * of the free objects in this slab. May cause |
| * another error because the object count is now wrong. |
| */ |
| set_freepointer(s, p, NULL); |
| return 0; |
| } |
| return 1; |
| } |
| |
| static int check_slab(struct kmem_cache *s, struct page *page) |
| { |
| int maxobj; |
| |
| VM_BUG_ON(!irqs_disabled()); |
| |
| if (!PageSlab(page)) { |
| slab_err(s, page, "Not a valid slab page"); |
| return 0; |
| } |
| |
| maxobj = (PAGE_SIZE << compound_order(page)) / s->size; |
| if (page->objects > maxobj) { |
| slab_err(s, page, "objects %u > max %u", |
| s->name, page->objects, maxobj); |
| return 0; |
| } |
| if (page->inuse > page->objects) { |
| slab_err(s, page, "inuse %u > max %u", |
| s->name, page->inuse, page->objects); |
| return 0; |
| } |
| /* Slab_pad_check fixes things up after itself */ |
| slab_pad_check(s, page); |
| return 1; |
| } |
| |
| /* |
| * Determine if a certain object on a page is on the freelist. Must hold the |
| * slab lock to guarantee that the chains are in a consistent state. |
| */ |
| static int on_freelist(struct kmem_cache *s, struct page *page, void *search) |
| { |
| int nr = 0; |
| void *fp = page->freelist; |
| void *object = NULL; |
| unsigned long max_objects; |
| |
| while (fp && nr <= page->objects) { |
| if (fp == search) |
| return 1; |
| if (!check_valid_pointer(s, page, fp)) { |
| if (object) { |
| object_err(s, page, object, |
| "Freechain corrupt"); |
| set_freepointer(s, object, NULL); |
| break; |
| } else { |
| slab_err(s, page, "Freepointer corrupt"); |
| page->freelist = NULL; |
| page->inuse = page->objects; |
| slab_fix(s, "Freelist cleared"); |
| return 0; |
| } |
| break; |
| } |
| object = fp; |
| fp = get_freepointer(s, object); |
| nr++; |
| } |
| |
| max_objects = (PAGE_SIZE << compound_order(page)) / s->size; |
| if (max_objects > MAX_OBJS_PER_PAGE) |
| max_objects = MAX_OBJS_PER_PAGE; |
| |
| if (page->objects != max_objects) { |
| slab_err(s, page, "Wrong number of objects. Found %d but " |
| "should be %d", page->objects, max_objects); |
| page->objects = max_objects; |
| slab_fix(s, "Number of objects adjusted."); |
| } |
| if (page->inuse != page->objects - nr) { |
| slab_err(s, page, "Wrong object count. Counter is %d but " |
| "counted were %d", page->inuse, page->objects - nr); |
| page->inuse = page->objects - nr; |
| slab_fix(s, "Object count adjusted."); |
| } |
| return search == NULL; |
| } |
| |
| static void trace(struct kmem_cache *s, struct page *page, void *object, |
| int alloc) |
| { |
| if (s->flags & SLAB_TRACE) { |
| printk(KERN_INFO "TRACE %s %s 0x%p inuse=%d fp=0x%p\n", |
| s->name, |
| alloc ? "alloc" : "free", |
| object, page->inuse, |
| page->freelist); |
| |
| if (!alloc) |
| print_section("Object", (void *)object, s->objsize); |
| |
| dump_stack(); |
| } |
| } |
| |
| /* |
| * Tracking of fully allocated slabs for debugging purposes. |
| */ |
| static void add_full(struct kmem_cache_node *n, struct page *page) |
| { |
| spin_lock(&n->list_lock); |
| list_add(&page->lru, &n->full); |
| spin_unlock(&n->list_lock); |
| } |
| |
| static void remove_full(struct kmem_cache *s, struct page *page) |
| { |
| struct kmem_cache_node *n; |
| |
| if (!(s->flags & SLAB_STORE_USER)) |
| return; |
| |
| n = get_node(s, page_to_nid(page)); |
| |
| spin_lock(&n->list_lock); |
| list_del(&page->lru); |
| spin_unlock(&n->list_lock); |
| } |
| |
| /* Tracking of the number of slabs for debugging purposes */ |
| static inline unsigned long slabs_node(struct kmem_cache *s, int node) |
| { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| return atomic_long_read(&n->nr_slabs); |
| } |
| |
| static inline unsigned long node_nr_slabs(struct kmem_cache_node *n) |
| { |
| return atomic_long_read(&n->nr_slabs); |
| } |
| |
| static inline void inc_slabs_node(struct kmem_cache *s, int node, int objects) |
| { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| /* |
| * May be called early in order to allocate a slab for the |
| * kmem_cache_node structure. Solve the chicken-egg |
| * dilemma by deferring the increment of the count during |
| * bootstrap (see early_kmem_cache_node_alloc). |
| */ |
| if (!NUMA_BUILD || n) { |
| atomic_long_inc(&n->nr_slabs); |
| atomic_long_add(objects, &n->total_objects); |
| } |
| } |
| static inline void dec_slabs_node(struct kmem_cache *s, int node, int objects) |
| { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| atomic_long_dec(&n->nr_slabs); |
| atomic_long_sub(objects, &n->total_objects); |
| } |
| |
| /* Object debug checks for alloc/free paths */ |
| static void setup_object_debug(struct kmem_cache *s, struct page *page, |
| void *object) |
| { |
| if (!(s->flags & (SLAB_STORE_USER|SLAB_RED_ZONE|__OBJECT_POISON))) |
| return; |
| |
| init_object(s, object, 0); |
| init_tracking(s, object); |
| } |
| |
| static int alloc_debug_processing(struct kmem_cache *s, struct page *page, |
| void *object, unsigned long addr) |
| { |
| if (!check_slab(s, page)) |
| goto bad; |
| |
| if (!on_freelist(s, page, object)) { |
| object_err(s, page, object, "Object already allocated"); |
| goto bad; |
| } |
| |
| if (!check_valid_pointer(s, page, object)) { |
| object_err(s, page, object, "Freelist Pointer check fails"); |
| goto bad; |
| } |
| |
| if (!check_object(s, page, object, 0)) |
| goto bad; |
| |
| /* Success perform special debug activities for allocs */ |
| if (s->flags & SLAB_STORE_USER) |
| set_track(s, object, TRACK_ALLOC, addr); |
| trace(s, page, object, 1); |
| init_object(s, object, 1); |
| return 1; |
| |
| bad: |
| if (PageSlab(page)) { |
| /* |
| * If this is a slab page then lets do the best we can |
| * to avoid issues in the future. Marking all objects |
| * as used avoids touching the remaining objects. |
| */ |
| slab_fix(s, "Marking all objects used"); |
| page->inuse = page->objects; |
| page->freelist = NULL; |
| } |
| return 0; |
| } |
| |
| static int free_debug_processing(struct kmem_cache *s, struct page *page, |
| void *object, unsigned long addr) |
| { |
| if (!check_slab(s, page)) |
| goto fail; |
| |
| if (!check_valid_pointer(s, page, object)) { |
| slab_err(s, page, "Invalid object pointer 0x%p", object); |
| goto fail; |
| } |
| |
| if (on_freelist(s, page, object)) { |
| object_err(s, page, object, "Object already free"); |
| goto fail; |
| } |
| |
| if (!check_object(s, page, object, 1)) |
| return 0; |
| |
| if (unlikely(s != page->slab)) { |
| if (!PageSlab(page)) { |
| slab_err(s, page, "Attempt to free object(0x%p) " |
| "outside of slab", object); |
| } else if (!page->slab) { |
| printk(KERN_ERR |
| "SLUB <none>: no slab for object 0x%p.\n", |
| object); |
| dump_stack(); |
| } else |
| object_err(s, page, object, |
| "page slab pointer corrupt."); |
| goto fail; |
| } |
| |
| /* Special debug activities for freeing objects */ |
| if (!PageSlubFrozen(page) && !page->freelist) |
| remove_full(s, page); |
| if (s->flags & SLAB_STORE_USER) |
| set_track(s, object, TRACK_FREE, addr); |
| trace(s, page, object, 0); |
| init_object(s, object, 0); |
| return 1; |
| |
| fail: |
| slab_fix(s, "Object at 0x%p not freed", object); |
| return 0; |
| } |
| |
| static int __init setup_slub_debug(char *str) |
| { |
| slub_debug = DEBUG_DEFAULT_FLAGS; |
| if (*str++ != '=' || !*str) |
| /* |
| * No options specified. Switch on full debugging. |
| */ |
| goto out; |
| |
| if (*str == ',') |
| /* |
| * No options but restriction on slabs. This means full |
| * debugging for slabs matching a pattern. |
| */ |
| goto check_slabs; |
| |
| if (tolower(*str) == 'o') { |
| /* |
| * Avoid enabling debugging on caches if its minimum order |
| * would increase as a result. |
| */ |
| disable_higher_order_debug = 1; |
| goto out; |
| } |
| |
| slub_debug = 0; |
| if (*str == '-') |
| /* |
| * Switch off all debugging measures. |
| */ |
| goto out; |
| |
| /* |
| * Determine which debug features should be switched on |
| */ |
| for (; *str && *str != ','; str++) { |
| switch (tolower(*str)) { |
| case 'f': |
| slub_debug |= SLAB_DEBUG_FREE; |
| break; |
| case 'z': |
| slub_debug |= SLAB_RED_ZONE; |
| break; |
| case 'p': |
| slub_debug |= SLAB_POISON; |
| break; |
| case 'u': |
| slub_debug |= SLAB_STORE_USER; |
| break; |
| case 't': |
| slub_debug |= SLAB_TRACE; |
| break; |
| default: |
| printk(KERN_ERR "slub_debug option '%c' " |
| "unknown. skipped\n", *str); |
| } |
| } |
| |
| check_slabs: |
| if (*str == ',') |
| slub_debug_slabs = str + 1; |
| out: |
| return 1; |
| } |
| |
| __setup("slub_debug", setup_slub_debug); |
| |
| static unsigned long kmem_cache_flags(unsigned long objsize, |
| unsigned long flags, const char *name, |
| void (*ctor)(void *)) |
| { |
| /* |
| * Enable debugging if selected on the kernel commandline. |
| */ |
| if (slub_debug && (!slub_debug_slabs || |
| !strncmp(slub_debug_slabs, name, strlen(slub_debug_slabs)))) |
| flags |= slub_debug; |
| |
| return flags; |
| } |
| #else |
| static inline void setup_object_debug(struct kmem_cache *s, |
| struct page *page, void *object) {} |
| |
| static inline int alloc_debug_processing(struct kmem_cache *s, |
| struct page *page, void *object, unsigned long addr) { return 0; } |
| |
| static inline int free_debug_processing(struct kmem_cache *s, |
| struct page *page, void *object, unsigned long addr) { return 0; } |
| |
| static inline int slab_pad_check(struct kmem_cache *s, struct page *page) |
| { return 1; } |
| static inline int check_object(struct kmem_cache *s, struct page *page, |
| void *object, int active) { return 1; } |
| static inline void add_full(struct kmem_cache_node *n, struct page *page) {} |
| static inline unsigned long kmem_cache_flags(unsigned long objsize, |
| unsigned long flags, const char *name, |
| void (*ctor)(void *)) |
| { |
| return flags; |
| } |
| #define slub_debug 0 |
| |
| #define disable_higher_order_debug 0 |
| |
| static inline unsigned long slabs_node(struct kmem_cache *s, int node) |
| { return 0; } |
| static inline unsigned long node_nr_slabs(struct kmem_cache_node *n) |
| { return 0; } |
| static inline void inc_slabs_node(struct kmem_cache *s, int node, |
| int objects) {} |
| static inline void dec_slabs_node(struct kmem_cache *s, int node, |
| int objects) {} |
| #endif |
| |
| /* |
| * Slab allocation and freeing |
| */ |
| static inline struct page *alloc_slab_page(gfp_t flags, int node, |
| struct kmem_cache_order_objects oo) |
| { |
| int order = oo_order(oo); |
| |
| flags |= __GFP_NOTRACK; |
| |
| if (node == -1) |
| return alloc_pages(flags, order); |
| else |
| return alloc_pages_node(node, flags, order); |
| } |
| |
| static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node) |
| { |
| struct page *page; |
| struct kmem_cache_order_objects oo = s->oo; |
| gfp_t alloc_gfp; |
| |
| flags |= s->allocflags; |
| |
| /* |
| * Let the initial higher-order allocation fail under memory pressure |
| * so we fall-back to the minimum order allocation. |
| */ |
| alloc_gfp = (flags | __GFP_NOWARN | __GFP_NORETRY) & ~__GFP_NOFAIL; |
| |
| page = alloc_slab_page(alloc_gfp, node, oo); |
| if (unlikely(!page)) { |
| oo = s->min; |
| /* |
| * Allocation may have failed due to fragmentation. |
| * Try a lower order alloc if possible |
| */ |
| page = alloc_slab_page(flags, node, oo); |
| if (!page) |
| return NULL; |
| |
| stat(get_cpu_slab(s, raw_smp_processor_id()), ORDER_FALLBACK); |
| } |
| |
| if (kmemcheck_enabled |
| && !(s->flags & (SLAB_NOTRACK | DEBUG_DEFAULT_FLAGS))) { |
| int pages = 1 << oo_order(oo); |
| |
| kmemcheck_alloc_shadow(page, oo_order(oo), flags, node); |
| |
| /* |
| * Objects from caches that have a constructor don't get |
| * cleared when they're allocated, so we need to do it here. |
| */ |
| if (s->ctor) |
| kmemcheck_mark_uninitialized_pages(page, pages); |
| else |
| kmemcheck_mark_unallocated_pages(page, pages); |
| } |
| |
| page->objects = oo_objects(oo); |
| mod_zone_page_state(page_zone(page), |
| (s->flags & SLAB_RECLAIM_ACCOUNT) ? |
| NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE, |
| 1 << oo_order(oo)); |
| |
| return page; |
| } |
| |
| static void setup_object(struct kmem_cache *s, struct page *page, |
| void *object) |
| { |
| setup_object_debug(s, page, object); |
| if (unlikely(s->ctor)) |
| s->ctor(object); |
| } |
| |
| static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node) |
| { |
| struct page *page; |
| void *start; |
| void *last; |
| void *p; |
| |
| BUG_ON(flags & GFP_SLAB_BUG_MASK); |
| |
| page = allocate_slab(s, |
| flags & (GFP_RECLAIM_MASK | GFP_CONSTRAINT_MASK), node); |
| if (!page) |
| goto out; |
| |
| inc_slabs_node(s, page_to_nid(page), page->objects); |
| page->slab = s; |
| page->flags |= 1 << PG_slab; |
| if (s->flags & (SLAB_DEBUG_FREE | SLAB_RED_ZONE | SLAB_POISON | |
| SLAB_STORE_USER | SLAB_TRACE)) |
| __SetPageSlubDebug(page); |
| |
| start = page_address(page); |
| |
| if (unlikely(s->flags & SLAB_POISON)) |
| memset(start, POISON_INUSE, PAGE_SIZE << compound_order(page)); |
| |
| last = start; |
| for_each_object(p, s, start, page->objects) { |
| setup_object(s, page, last); |
| set_freepointer(s, last, p); |
| last = p; |
| } |
| setup_object(s, page, last); |
| set_freepointer(s, last, NULL); |
| |
| page->freelist = start; |
| page->inuse = 0; |
| out: |
| return page; |
| } |
| |
| static void __free_slab(struct kmem_cache *s, struct page *page) |
| { |
| int order = compound_order(page); |
| int pages = 1 << order; |
| |
| if (unlikely(SLABDEBUG && PageSlubDebug(page))) { |
| void *p; |
| |
| slab_pad_check(s, page); |
| for_each_object(p, s, page_address(page), |
| page->objects) |
| check_object(s, page, p, 0); |
| __ClearPageSlubDebug(page); |
| } |
| |
| kmemcheck_free_shadow(page, compound_order(page)); |
| |
| mod_zone_page_state(page_zone(page), |
| (s->flags & SLAB_RECLAIM_ACCOUNT) ? |
| NR_SLAB_RECLAIMABLE : NR_SLAB_UNRECLAIMABLE, |
| -pages); |
| |
| __ClearPageSlab(page); |
| reset_page_mapcount(page); |
| if (current->reclaim_state) |
| current->reclaim_state->reclaimed_slab += pages; |
| __free_pages(page, order); |
| } |
| |
| static void rcu_free_slab(struct rcu_head *h) |
| { |
| struct page *page; |
| |
| page = container_of((struct list_head *)h, struct page, lru); |
| __free_slab(page->slab, page); |
| } |
| |
| static void free_slab(struct kmem_cache *s, struct page *page) |
| { |
| if (unlikely(s->flags & SLAB_DESTROY_BY_RCU)) { |
| /* |
| * RCU free overloads the RCU head over the LRU |
| */ |
| struct rcu_head *head = (void *)&page->lru; |
| |
| call_rcu(head, rcu_free_slab); |
| } else |
| __free_slab(s, page); |
| } |
| |
| static void discard_slab(struct kmem_cache *s, struct page *page) |
| { |
| dec_slabs_node(s, page_to_nid(page), page->objects); |
| free_slab(s, page); |
| } |
| |
| /* |
| * Per slab locking using the pagelock |
| */ |
| static __always_inline void slab_lock(struct page *page) |
| { |
| bit_spin_lock(PG_locked, &page->flags); |
| } |
| |
| static __always_inline void slab_unlock(struct page *page) |
| { |
| __bit_spin_unlock(PG_locked, &page->flags); |
| } |
| |
| static __always_inline int slab_trylock(struct page *page) |
| { |
| int rc = 1; |
| |
| rc = bit_spin_trylock(PG_locked, &page->flags); |
| return rc; |
| } |
| |
| /* |
| * Management of partially allocated slabs |
| */ |
| static void add_partial(struct kmem_cache_node *n, |
| struct page *page, int tail) |
| { |
| spin_lock(&n->list_lock); |
| n->nr_partial++; |
| if (tail) |
| list_add_tail(&page->lru, &n->partial); |
| else |
| list_add(&page->lru, &n->partial); |
| spin_unlock(&n->list_lock); |
| } |
| |
| static void remove_partial(struct kmem_cache *s, struct page *page) |
| { |
| struct kmem_cache_node *n = get_node(s, page_to_nid(page)); |
| |
| spin_lock(&n->list_lock); |
| list_del(&page->lru); |
| n->nr_partial--; |
| spin_unlock(&n->list_lock); |
| } |
| |
| /* |
| * Lock slab and remove from the partial list. |
| * |
| * Must hold list_lock. |
| */ |
| static inline int lock_and_freeze_slab(struct kmem_cache_node *n, |
| struct page *page) |
| { |
| if (slab_trylock(page)) { |
| list_del(&page->lru); |
| n->nr_partial--; |
| __SetPageSlubFrozen(page); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* |
| * Try to allocate a partial slab from a specific node. |
| */ |
| static struct page *get_partial_node(struct kmem_cache_node *n) |
| { |
| struct page *page; |
| |
| /* |
| * Racy check. If we mistakenly see no partial slabs then we |
| * just allocate an empty slab. If we mistakenly try to get a |
| * partial slab and there is none available then get_partials() |
| * will return NULL. |
| */ |
| if (!n || !n->nr_partial) |
| return NULL; |
| |
| spin_lock(&n->list_lock); |
| list_for_each_entry(page, &n->partial, lru) |
| if (lock_and_freeze_slab(n, page)) |
| goto out; |
| page = NULL; |
| out: |
| spin_unlock(&n->list_lock); |
| return page; |
| } |
| |
| /* |
| * Get a page from somewhere. Search in increasing NUMA distances. |
| */ |
| static struct page *get_any_partial(struct kmem_cache *s, gfp_t flags) |
| { |
| #ifdef CONFIG_NUMA |
| struct zonelist *zonelist; |
| struct zoneref *z; |
| struct zone *zone; |
| enum zone_type high_zoneidx = gfp_zone(flags); |
| struct page *page; |
| |
| /* |
| * The defrag ratio allows a configuration of the tradeoffs between |
| * inter node defragmentation and node local allocations. A lower |
| * defrag_ratio increases the tendency to do local allocations |
| * instead of attempting to obtain partial slabs from other nodes. |
| * |
| * If the defrag_ratio is set to 0 then kmalloc() always |
| * returns node local objects. If the ratio is higher then kmalloc() |
| * may return off node objects because partial slabs are obtained |
| * from other nodes and filled up. |
| * |
| * If /sys/kernel/slab/xx/defrag_ratio is set to 100 (which makes |
| * defrag_ratio = 1000) then every (well almost) allocation will |
| * first attempt to defrag slab caches on other nodes. This means |
| * scanning over all nodes to look for partial slabs which may be |
| * expensive if we do it every time we are trying to find a slab |
| * with available objects. |
| */ |
| if (!s->remote_node_defrag_ratio || |
| get_cycles() % 1024 > s->remote_node_defrag_ratio) |
| return NULL; |
| |
| zonelist = node_zonelist(slab_node(current->mempolicy), flags); |
| for_each_zone_zonelist(zone, z, zonelist, high_zoneidx) { |
| struct kmem_cache_node *n; |
| |
| n = get_node(s, zone_to_nid(zone)); |
| |
| if (n && cpuset_zone_allowed_hardwall(zone, flags) && |
| n->nr_partial > s->min_partial) { |
| page = get_partial_node(n); |
| if (page) |
| return page; |
| } |
| } |
| #endif |
| return NULL; |
| } |
| |
| /* |
| * Get a partial page, lock it and return it. |
| */ |
| static struct page *get_partial(struct kmem_cache *s, gfp_t flags, int node) |
| { |
| struct page *page; |
| int searchnode = (node == -1) ? numa_node_id() : node; |
| |
| page = get_partial_node(get_node(s, searchnode)); |
| if (page || (flags & __GFP_THISNODE)) |
| return page; |
| |
| return get_any_partial(s, flags); |
| } |
| |
| /* |
| * Move a page back to the lists. |
| * |
| * Must be called with the slab lock held. |
| * |
| * On exit the slab lock will have been dropped. |
| */ |
| static void unfreeze_slab(struct kmem_cache *s, struct page *page, int tail) |
| { |
| struct kmem_cache_node *n = get_node(s, page_to_nid(page)); |
| struct kmem_cache_cpu *c = get_cpu_slab(s, smp_processor_id()); |
| |
| __ClearPageSlubFrozen(page); |
| if (page->inuse) { |
| |
| if (page->freelist) { |
| add_partial(n, page, tail); |
| stat(c, tail ? DEACTIVATE_TO_TAIL : DEACTIVATE_TO_HEAD); |
| } else { |
| stat(c, DEACTIVATE_FULL); |
| if (SLABDEBUG && PageSlubDebug(page) && |
| (s->flags & SLAB_STORE_USER)) |
| add_full(n, page); |
| } |
| slab_unlock(page); |
| } else { |
| stat(c, DEACTIVATE_EMPTY); |
| if (n->nr_partial < s->min_partial) { |
| /* |
| * Adding an empty slab to the partial slabs in order |
| * to avoid page allocator overhead. This slab needs |
| * to come after the other slabs with objects in |
| * so that the others get filled first. That way the |
| * size of the partial list stays small. |
| * |
| * kmem_cache_shrink can reclaim any empty slabs from |
| * the partial list. |
| */ |
| add_partial(n, page, 1); |
| slab_unlock(page); |
| } else { |
| slab_unlock(page); |
| stat(get_cpu_slab(s, raw_smp_processor_id()), FREE_SLAB); |
| discard_slab(s, page); |
| } |
| } |
| } |
| |
| /* |
| * Remove the cpu slab |
| */ |
| static void deactivate_slab(struct kmem_cache *s, struct kmem_cache_cpu *c) |
| { |
| struct page *page = c->page; |
| int tail = 1; |
| |
| if (page->freelist) |
| stat(c, DEACTIVATE_REMOTE_FREES); |
| /* |
| * Merge cpu freelist into slab freelist. Typically we get here |
| * because both freelists are empty. So this is unlikely |
| * to occur. |
| */ |
| while (unlikely(c->freelist)) { |
| void **object; |
| |
| tail = 0; /* Hot objects. Put the slab first */ |
| |
| /* Retrieve object from cpu_freelist */ |
| object = c->freelist; |
| c->freelist = c->freelist[c->offset]; |
| |
| /* And put onto the regular freelist */ |
| object[c->offset] = page->freelist; |
| page->freelist = object; |
| page->inuse--; |
| } |
| c->page = NULL; |
| unfreeze_slab(s, page, tail); |
| } |
| |
| static inline void flush_slab(struct kmem_cache *s, struct kmem_cache_cpu *c) |
| { |
| stat(c, CPUSLAB_FLUSH); |
| slab_lock(c->page); |
| deactivate_slab(s, c); |
| } |
| |
| /* |
| * Flush cpu slab. |
| * |
| * Called from IPI handler with interrupts disabled. |
| */ |
| static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu) |
| { |
| struct kmem_cache_cpu *c = get_cpu_slab(s, cpu); |
| |
| if (likely(c && c->page)) |
| flush_slab(s, c); |
| } |
| |
| static void flush_cpu_slab(void *d) |
| { |
| struct kmem_cache *s = d; |
| |
| __flush_cpu_slab(s, smp_processor_id()); |
| } |
| |
| static void flush_all(struct kmem_cache *s) |
| { |
| on_each_cpu(flush_cpu_slab, s, 1); |
| } |
| |
| /* |
| * Check if the objects in a per cpu structure fit numa |
| * locality expectations. |
| */ |
| static inline int node_match(struct kmem_cache_cpu *c, int node) |
| { |
| #ifdef CONFIG_NUMA |
| if (node != -1 && c->node != node) |
| return 0; |
| #endif |
| return 1; |
| } |
| |
| static int count_free(struct page *page) |
| { |
| return page->objects - page->inuse; |
| } |
| |
| static unsigned long count_partial(struct kmem_cache_node *n, |
| int (*get_count)(struct page *)) |
| { |
| unsigned long flags; |
| unsigned long x = 0; |
| struct page *page; |
| |
| spin_lock_irqsave(&n->list_lock, flags); |
| list_for_each_entry(page, &n->partial, lru) |
| x += get_count(page); |
| spin_unlock_irqrestore(&n->list_lock, flags); |
| return x; |
| } |
| |
| static inline unsigned long node_nr_objs(struct kmem_cache_node *n) |
| { |
| #ifdef CONFIG_SLUB_DEBUG |
| return atomic_long_read(&n->total_objects); |
| #else |
| return 0; |
| #endif |
| } |
| |
| static noinline void |
| slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid) |
| { |
| int node; |
| |
| printk(KERN_WARNING |
| "SLUB: Unable to allocate memory on node %d (gfp=0x%x)\n", |
| nid, gfpflags); |
| printk(KERN_WARNING " cache: %s, object size: %d, buffer size: %d, " |
| "default order: %d, min order: %d\n", s->name, s->objsize, |
| s->size, oo_order(s->oo), oo_order(s->min)); |
| |
| if (oo_order(s->min) > get_order(s->objsize)) |
| printk(KERN_WARNING " %s debugging increased min order, use " |
| "slub_debug=O to disable.\n", s->name); |
| |
| for_each_online_node(node) { |
| struct kmem_cache_node *n = get_node(s, node); |
| unsigned long nr_slabs; |
| unsigned long nr_objs; |
| unsigned long nr_free; |
| |
| if (!n) |
| continue; |
| |
| nr_free = count_partial(n, count_free); |
| nr_slabs = node_nr_slabs(n); |
| nr_objs = node_nr_objs(n); |
| |
| printk(KERN_WARNING |
| " node %d: slabs: %ld, objs: %ld, free: %ld\n", |
| node, nr_slabs, nr_objs, nr_free); |
| } |
| } |
| |
| /* |
| * Slow path. The lockless freelist is empty or we need to perform |
| * debugging duties. |
| * |
| * Interrupts are disabled. |
| * |
| * Processing is still very fast if new objects have been freed to the |
| * regular freelist. In that case we simply take over the regular freelist |
| * as the lockless freelist and zap the regular freelist. |
| * |
| * If that is not working then we fall back to the partial lists. We take the |
| * first element of the freelist as the object to allocate now and move the |
| * rest of the freelist to the lockless freelist. |
| * |
| * And if we were unable to get a new slab from the partial slab lists then |
| * we need to allocate a new slab. This is the slowest path since it involves |
| * a call to the page allocator and the setup of a new slab. |
| */ |
| static void *__slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node, |
| unsigned long addr, struct kmem_cache_cpu *c) |
| { |
| void **object; |
| struct page *new; |
| |
| /* We handle __GFP_ZERO in the caller */ |
| gfpflags &= ~__GFP_ZERO; |
| |
| if (!c->page) |
| goto new_slab; |
| |
| slab_lock(c->page); |
| if (unlikely(!node_match(c, node))) |
| goto another_slab; |
| |
| stat(c, ALLOC_REFILL); |
| |
| load_freelist: |
| object = c->page->freelist; |
| if (unlikely(!object)) |
| goto another_slab; |
| if (unlikely(SLABDEBUG && PageSlubDebug(c->page))) |
| goto debug; |
| |
| c->freelist = object[c->offset]; |
| c->page->inuse = c->page->objects; |
| c->page->freelist = NULL; |
| c->node = page_to_nid(c->page); |
| unlock_out: |
| slab_unlock(c->page); |
| stat(c, ALLOC_SLOWPATH); |
| return object; |
| |
| another_slab: |
| deactivate_slab(s, c); |
| |
| new_slab: |
| new = get_partial(s, gfpflags, node); |
| if (new) { |
| c->page = new; |
| stat(c, ALLOC_FROM_PARTIAL); |
| goto load_freelist; |
| } |
| |
| if (gfpflags & __GFP_WAIT) |
| local_irq_enable(); |
| |
| new = new_slab(s, gfpflags, node); |
| |
| if (gfpflags & __GFP_WAIT) |
| local_irq_disable(); |
| |
| if (new) { |
| c = get_cpu_slab(s, smp_processor_id()); |
| stat(c, ALLOC_SLAB); |
| if (c->page) |
| flush_slab(s, c); |
| slab_lock(new); |
| __SetPageSlubFrozen(new); |
| c->page = new; |
| goto load_freelist; |
| } |
| if (!(gfpflags & __GFP_NOWARN) && printk_ratelimit()) |
| slab_out_of_memory(s, gfpflags, node); |
| return NULL; |
| debug: |
| if (!alloc_debug_processing(s, c->page, object, addr)) |
| goto another_slab; |
| |
| c->page->inuse++; |
| c->page->freelist = object[c->offset]; |
| c->node = -1; |
| goto unlock_out; |
| } |
| |
| /* |
| * Inlined fastpath so that allocation functions (kmalloc, kmem_cache_alloc) |
| * have the fastpath folded into their functions. So no function call |
| * overhead for requests that can be satisfied on the fastpath. |
| * |
| * The fastpath works by first checking if the lockless freelist can be used. |
| * If not then __slab_alloc is called for slow processing. |
| * |
| * Otherwise we can simply pick the next object from the lockless free list. |
| */ |
| static __always_inline void *slab_alloc(struct kmem_cache *s, |
| gfp_t gfpflags, int node, unsigned long addr) |
| { |
| void **object; |
| struct kmem_cache_cpu *c; |
| unsigned long flags; |
| unsigned int objsize; |
| |
| gfpflags &= gfp_allowed_mask; |
| |
| lockdep_trace_alloc(gfpflags); |
| might_sleep_if(gfpflags & __GFP_WAIT); |
| |
| if (should_failslab(s->objsize, gfpflags)) |
| return NULL; |
| |
| local_irq_save(flags); |
| c = get_cpu_slab(s, smp_processor_id()); |
| objsize = c->objsize; |
| if (unlikely(!c->freelist || !node_match(c, node))) |
| |
| object = __slab_alloc(s, gfpflags, node, addr, c); |
| |
| else { |
| object = c->freelist; |
| c->freelist = object[c->offset]; |
| stat(c, ALLOC_FASTPATH); |
| } |
| local_irq_restore(flags); |
| |
| if (unlikely(gfpflags & __GFP_ZERO) && object) |
| memset(object, 0, objsize); |
| |
| kmemcheck_slab_alloc(s, gfpflags, object, c->objsize); |
| kmemleak_alloc_recursive(object, objsize, 1, s->flags, gfpflags); |
| |
| return object; |
| } |
| |
| void *kmem_cache_alloc(struct kmem_cache *s, gfp_t gfpflags) |
| { |
| void *ret = slab_alloc(s, gfpflags, -1, _RET_IP_); |
| |
| trace_kmem_cache_alloc(_RET_IP_, ret, s->objsize, s->size, gfpflags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(kmem_cache_alloc); |
| |
| #ifdef CONFIG_KMEMTRACE |
| void *kmem_cache_alloc_notrace(struct kmem_cache *s, gfp_t gfpflags) |
| { |
| return slab_alloc(s, gfpflags, -1, _RET_IP_); |
| } |
| EXPORT_SYMBOL(kmem_cache_alloc_notrace); |
| #endif |
| |
| #ifdef CONFIG_NUMA |
| void *kmem_cache_alloc_node(struct kmem_cache *s, gfp_t gfpflags, int node) |
| { |
| void *ret = slab_alloc(s, gfpflags, node, _RET_IP_); |
| |
| trace_kmem_cache_alloc_node(_RET_IP_, ret, |
| s->objsize, s->size, gfpflags, node); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(kmem_cache_alloc_node); |
| #endif |
| |
| #ifdef CONFIG_KMEMTRACE |
| void *kmem_cache_alloc_node_notrace(struct kmem_cache *s, |
| gfp_t gfpflags, |
| int node) |
| { |
| return slab_alloc(s, gfpflags, node, _RET_IP_); |
| } |
| EXPORT_SYMBOL(kmem_cache_alloc_node_notrace); |
| #endif |
| |
| /* |
| * Slow patch handling. This may still be called frequently since objects |
| * have a longer lifetime than the cpu slabs in most processing loads. |
| * |
| * So we still attempt to reduce cache line usage. Just take the slab |
| * lock and free the item. If there is no additional partial page |
| * handling required then we can return immediately. |
| */ |
| static void __slab_free(struct kmem_cache *s, struct page *page, |
| void *x, unsigned long addr, unsigned int offset) |
| { |
| void *prior; |
| void **object = (void *)x; |
| struct kmem_cache_cpu *c; |
| |
| c = get_cpu_slab(s, raw_smp_processor_id()); |
| stat(c, FREE_SLOWPATH); |
| slab_lock(page); |
| |
| if (unlikely(SLABDEBUG && PageSlubDebug(page))) |
| goto debug; |
| |
| checks_ok: |
| prior = object[offset] = page->freelist; |
| page->freelist = object; |
| page->inuse--; |
| |
| if (unlikely(PageSlubFrozen(page))) { |
| stat(c, FREE_FROZEN); |
| goto out_unlock; |
| } |
| |
| if (unlikely(!page->inuse)) |
| goto slab_empty; |
| |
| /* |
| * Objects left in the slab. If it was not on the partial list before |
| * then add it. |
| */ |
| if (unlikely(!prior)) { |
| add_partial(get_node(s, page_to_nid(page)), page, 1); |
| stat(c, FREE_ADD_PARTIAL); |
| } |
| |
| out_unlock: |
| slab_unlock(page); |
| return; |
| |
| slab_empty: |
| if (prior) { |
| /* |
| * Slab still on the partial list. |
| */ |
| remove_partial(s, page); |
| stat(c, FREE_REMOVE_PARTIAL); |
| } |
| slab_unlock(page); |
| stat(c, FREE_SLAB); |
| discard_slab(s, page); |
| return; |
| |
| debug: |
| if (!free_debug_processing(s, page, x, addr)) |
| goto out_unlock; |
| goto checks_ok; |
| } |
| |
| /* |
| * Fastpath with forced inlining to produce a kfree and kmem_cache_free that |
| * can perform fastpath freeing without additional function calls. |
| * |
| * The fastpath is only possible if we are freeing to the current cpu slab |
| * of this processor. This typically the case if we have just allocated |
| * the item before. |
| * |
| * If fastpath is not possible then fall back to __slab_free where we deal |
| * with all sorts of special processing. |
| */ |
| static __always_inline void slab_free(struct kmem_cache *s, |
| struct page *page, void *x, unsigned long addr) |
| { |
| void **object = (void *)x; |
| struct kmem_cache_cpu *c; |
| unsigned long flags; |
| |
| kmemleak_free_recursive(x, s->flags); |
| local_irq_save(flags); |
| c = get_cpu_slab(s, smp_processor_id()); |
| kmemcheck_slab_free(s, object, c->objsize); |
| debug_check_no_locks_freed(object, c->objsize); |
| if (!(s->flags & SLAB_DEBUG_OBJECTS)) |
| debug_check_no_obj_freed(object, c->objsize); |
| if (likely(page == c->page && c->node >= 0)) { |
| object[c->offset] = c->freelist; |
| c->freelist = object; |
| stat(c, FREE_FASTPATH); |
| } else |
| __slab_free(s, page, x, addr, c->offset); |
| |
| local_irq_restore(flags); |
| } |
| |
| void kmem_cache_free(struct kmem_cache *s, void *x) |
| { |
| struct page *page; |
| |
| page = virt_to_head_page(x); |
| |
| slab_free(s, page, x, _RET_IP_); |
| |
| trace_kmem_cache_free(_RET_IP_, x); |
| } |
| EXPORT_SYMBOL(kmem_cache_free); |
| |
| /* Figure out on which slab page the object resides */ |
| static struct page *get_object_page(const void *x) |
| { |
| struct page *page = virt_to_head_page(x); |
| |
| if (!PageSlab(page)) |
| return NULL; |
| |
| return page; |
| } |
| |
| /* |
| * Object placement in a slab is made very easy because we always start at |
| * offset 0. If we tune the size of the object to the alignment then we can |
| * get the required alignment by putting one properly sized object after |
| * another. |
| * |
| * Notice that the allocation order determines the sizes of the per cpu |
| * caches. Each processor has always one slab available for allocations. |
| * Increasing the allocation order reduces the number of times that slabs |
| * must be moved on and off the partial lists and is therefore a factor in |
| * locking overhead. |
| */ |
| |
| /* |
| * Mininum / Maximum order of slab pages. This influences locking overhead |
| * and slab fragmentation. A higher order reduces the number of partial slabs |
| * and increases the number of allocations possible without having to |
| * take the list_lock. |
| */ |
| static int slub_min_order; |
| static int slub_max_order = PAGE_ALLOC_COSTLY_ORDER; |
| static int slub_min_objects; |
| |
| /* |
| * Merge control. If this is set then no merging of slab caches will occur. |
| * (Could be removed. This was introduced to pacify the merge skeptics.) |
| */ |
| static int slub_nomerge; |
| |
| /* |
| * Calculate the order of allocation given an slab object size. |
| * |
| * The order of allocation has significant impact on performance and other |
| * system components. Generally order 0 allocations should be preferred since |
| * order 0 does not cause fragmentation in the page allocator. Larger objects |
| * be problematic to put into order 0 slabs because there may be too much |
| * unused space left. We go to a higher order if more than 1/16th of the slab |
| * would be wasted. |
| * |
| * In order to reach satisfactory performance we must ensure that a minimum |
| * number of objects is in one slab. Otherwise we may generate too much |
| * activity on the partial lists which requires taking the list_lock. This is |
| * less a concern for large slabs though which are rarely used. |
| * |
| * slub_max_order specifies the order where we begin to stop considering the |
| * number of objects in a slab as critical. If we reach slub_max_order then |
| * we try to keep the page order as low as possible. So we accept more waste |
| * of space in favor of a small page order. |
| * |
| * Higher order allocations also allow the placement of more objects in a |
| * slab and thereby reduce object handling overhead. If the user has |
| * requested a higher mininum order then we start with that one instead of |
| * the smallest order which will fit the object. |
| */ |
| static inline int slab_order(int size, int min_objects, |
| int max_order, int fract_leftover) |
| { |
| int order; |
| int rem; |
| int min_order = slub_min_order; |
| |
| if ((PAGE_SIZE << min_order) / size > MAX_OBJS_PER_PAGE) |
| return get_order(size * MAX_OBJS_PER_PAGE) - 1; |
| |
| for (order = max(min_order, |
| fls(min_objects * size - 1) - PAGE_SHIFT); |
| order <= max_order; order++) { |
| |
| unsigned long slab_size = PAGE_SIZE << order; |
| |
| if (slab_size < min_objects * size) |
| continue; |
| |
| rem = slab_size % size; |
| |
| if (rem <= slab_size / fract_leftover) |
| break; |
| |
| } |
| |
| return order; |
| } |
| |
| static inline int calculate_order(int size) |
| { |
| int order; |
| int min_objects; |
| int fraction; |
| int max_objects; |
| |
| /* |
| * Attempt to find best configuration for a slab. This |
| * works by first attempting to generate a layout with |
| * the best configuration and backing off gradually. |
| * |
| * First we reduce the acceptable waste in a slab. Then |
| * we reduce the minimum objects required in a slab. |
| */ |
| min_objects = slub_min_objects; |
| if (!min_objects) |
| min_objects = 4 * (fls(nr_cpu_ids) + 1); |
| max_objects = (PAGE_SIZE << slub_max_order)/size; |
| min_objects = min(min_objects, max_objects); |
| |
| while (min_objects > 1) { |
| fraction = 16; |
| while (fraction >= 4) { |
| order = slab_order(size, min_objects, |
| slub_max_order, fraction); |
| if (order <= slub_max_order) |
| return order; |
| fraction /= 2; |
| } |
| min_objects--; |
| } |
| |
| /* |
| * We were unable to place multiple objects in a slab. Now |
| * lets see if we can place a single object there. |
| */ |
| order = slab_order(size, 1, slub_max_order, 1); |
| if (order <= slub_max_order) |
| return order; |
| |
| /* |
| * Doh this slab cannot be placed using slub_max_order. |
| */ |
| order = slab_order(size, 1, MAX_ORDER, 1); |
| if (order < MAX_ORDER) |
| return order; |
| return -ENOSYS; |
| } |
| |
| /* |
| * Figure out what the alignment of the objects will be. |
| */ |
| static unsigned long calculate_alignment(unsigned long flags, |
| unsigned long align, unsigned long size) |
| { |
| /* |
| * If the user wants hardware cache aligned objects then follow that |
| * suggestion if the object is sufficiently large. |
| * |
| * The hardware cache alignment cannot override the specified |
| * alignment though. If that is greater then use it. |
| */ |
| if (flags & SLAB_HWCACHE_ALIGN) { |
| unsigned long ralign = cache_line_size(); |
| while (size <= ralign / 2) |
| ralign /= 2; |
| align = max(align, ralign); |
| } |
| |
| if (align < ARCH_SLAB_MINALIGN) |
| align = ARCH_SLAB_MINALIGN; |
| |
| return ALIGN(align, sizeof(void *)); |
| } |
| |
| static void init_kmem_cache_cpu(struct kmem_cache *s, |
| struct kmem_cache_cpu *c) |
| { |
| c->page = NULL; |
| c->freelist = NULL; |
| c->node = 0; |
| c->offset = s->offset / sizeof(void *); |
| c->objsize = s->objsize; |
| #ifdef CONFIG_SLUB_STATS |
| memset(c->stat, 0, NR_SLUB_STAT_ITEMS * sizeof(unsigned)); |
| #endif |
| } |
| |
| static void |
| init_kmem_cache_node(struct kmem_cache_node *n, struct kmem_cache *s) |
| { |
| n->nr_partial = 0; |
| spin_lock_init(&n->list_lock); |
| INIT_LIST_HEAD(&n->partial); |
| #ifdef CONFIG_SLUB_DEBUG |
| atomic_long_set(&n->nr_slabs, 0); |
| atomic_long_set(&n->total_objects, 0); |
| INIT_LIST_HEAD(&n->full); |
| #endif |
| } |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Per cpu array for per cpu structures. |
| * |
| * The per cpu array places all kmem_cache_cpu structures from one processor |
| * close together meaning that it becomes possible that multiple per cpu |
| * structures are contained in one cacheline. This may be particularly |
| * beneficial for the kmalloc caches. |
| * |
| * A desktop system typically has around 60-80 slabs. With 100 here we are |
| * likely able to get per cpu structures for all caches from the array defined |
| * here. We must be able to cover all kmalloc caches during bootstrap. |
| * |
| * If the per cpu array is exhausted then fall back to kmalloc |
| * of individual cachelines. No sharing is possible then. |
| */ |
| #define NR_KMEM_CACHE_CPU 100 |
| |
| static DEFINE_PER_CPU(struct kmem_cache_cpu [NR_KMEM_CACHE_CPU], |
| kmem_cache_cpu); |
| |
| static DEFINE_PER_CPU(struct kmem_cache_cpu *, kmem_cache_cpu_free); |
| static DECLARE_BITMAP(kmem_cach_cpu_free_init_once, CONFIG_NR_CPUS); |
| |
| static struct kmem_cache_cpu *alloc_kmem_cache_cpu(struct kmem_cache *s, |
| int cpu, gfp_t flags) |
| { |
| struct kmem_cache_cpu *c = per_cpu(kmem_cache_cpu_free, cpu); |
| |
| if (c) |
| per_cpu(kmem_cache_cpu_free, cpu) = |
| (void *)c->freelist; |
| else { |
| /* Table overflow: So allocate ourselves */ |
| c = kmalloc_node( |
| ALIGN(sizeof(struct kmem_cache_cpu), cache_line_size()), |
| flags, cpu_to_node(cpu)); |
| if (!c) |
| return NULL; |
| } |
| |
| init_kmem_cache_cpu(s, c); |
| return c; |
| } |
| |
| static void free_kmem_cache_cpu(struct kmem_cache_cpu *c, int cpu) |
| { |
| if (c < per_cpu(kmem_cache_cpu, cpu) || |
| c >= per_cpu(kmem_cache_cpu, cpu) + NR_KMEM_CACHE_CPU) { |
| kfree(c); |
| return; |
| } |
| c->freelist = (void *)per_cpu(kmem_cache_cpu_free, cpu); |
| per_cpu(kmem_cache_cpu_free, cpu) = c; |
| } |
| |
| static void free_kmem_cache_cpus(struct kmem_cache *s) |
| { |
| int cpu; |
| |
| for_each_online_cpu(cpu) { |
| struct kmem_cache_cpu *c = get_cpu_slab(s, cpu); |
| |
| if (c) { |
| s->cpu_slab[cpu] = NULL; |
| free_kmem_cache_cpu(c, cpu); |
| } |
| } |
| } |
| |
| static int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags) |
| { |
| int cpu; |
| |
| for_each_online_cpu(cpu) { |
| struct kmem_cache_cpu *c = get_cpu_slab(s, cpu); |
| |
| if (c) |
| continue; |
| |
| c = alloc_kmem_cache_cpu(s, cpu, flags); |
| if (!c) { |
| free_kmem_cache_cpus(s); |
| return 0; |
| } |
| s->cpu_slab[cpu] = c; |
| } |
| return 1; |
| } |
| |
| /* |
| * Initialize the per cpu array. |
| */ |
| static void init_alloc_cpu_cpu(int cpu) |
| { |
| int i; |
| |
| if (cpumask_test_cpu(cpu, to_cpumask(kmem_cach_cpu_free_init_once))) |
| return; |
| |
| for (i = NR_KMEM_CACHE_CPU - 1; i >= 0; i--) |
| free_kmem_cache_cpu(&per_cpu(kmem_cache_cpu, cpu)[i], cpu); |
| |
| cpumask_set_cpu(cpu, to_cpumask(kmem_cach_cpu_free_init_once)); |
| } |
| |
| static void __init init_alloc_cpu(void) |
| { |
| int cpu; |
| |
| for_each_online_cpu(cpu) |
| init_alloc_cpu_cpu(cpu); |
| } |
| |
| #else |
| static inline void free_kmem_cache_cpus(struct kmem_cache *s) {} |
| static inline void init_alloc_cpu(void) {} |
| |
| static inline int alloc_kmem_cache_cpus(struct kmem_cache *s, gfp_t flags) |
| { |
| init_kmem_cache_cpu(s, &s->cpu_slab); |
| return 1; |
| } |
| #endif |
| |
| #ifdef CONFIG_NUMA |
| /* |
| * No kmalloc_node yet so do it by hand. We know that this is the first |
| * slab on the node for this slabcache. There are no concurrent accesses |
| * possible. |
| * |
| * Note that this function only works on the kmalloc_node_cache |
| * when allocating for the kmalloc_node_cache. This is used for bootstrapping |
| * memory on a fresh node that has no slab structures yet. |
| */ |
| static void early_kmem_cache_node_alloc(gfp_t gfpflags, int node) |
| { |
| struct page *page; |
| struct kmem_cache_node *n; |
| unsigned long flags; |
| |
| BUG_ON(kmalloc_caches->size < sizeof(struct kmem_cache_node)); |
| |
| page = new_slab(kmalloc_caches, gfpflags, node); |
| |
| BUG_ON(!page); |
| if (page_to_nid(page) != node) { |
| printk(KERN_ERR "SLUB: Unable to allocate memory from " |
| "node %d\n", node); |
| printk(KERN_ERR "SLUB: Allocating a useless per node structure " |
| "in order to be able to continue\n"); |
| } |
| |
| n = page->freelist; |
| BUG_ON(!n); |
| page->freelist = get_freepointer(kmalloc_caches, n); |
| page->inuse++; |
| kmalloc_caches->node[node] = n; |
| #ifdef CONFIG_SLUB_DEBUG |
| init_object(kmalloc_caches, n, 1); |
| init_tracking(kmalloc_caches, n); |
| #endif |
| init_kmem_cache_node(n, kmalloc_caches); |
| inc_slabs_node(kmalloc_caches, node, page->objects); |
| |
| /* |
| * lockdep requires consistent irq usage for each lock |
| * so even though there cannot be a race this early in |
| * the boot sequence, we still disable irqs. |
| */ |
| local_irq_save(flags); |
| add_partial(n, page, 0); |
| local_irq_restore(flags); |
| } |
| |
| static void free_kmem_cache_nodes(struct kmem_cache *s) |
| { |
| int node; |
| |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = s->node[node]; |
| if (n && n != &s->local_node) |
| kmem_cache_free(kmalloc_caches, n); |
| s->node[node] = NULL; |
| } |
| } |
| |
| static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) |
| { |
| int node; |
| int local_node; |
| |
| if (slab_state >= UP) |
| local_node = page_to_nid(virt_to_page(s)); |
| else |
| local_node = 0; |
| |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n; |
| |
| if (local_node == node) |
| n = &s->local_node; |
| else { |
| if (slab_state == DOWN) { |
| early_kmem_cache_node_alloc(gfpflags, node); |
| continue; |
| } |
| n = kmem_cache_alloc_node(kmalloc_caches, |
| gfpflags, node); |
| |
| if (!n) { |
| free_kmem_cache_nodes(s); |
| return 0; |
| } |
| |
| } |
| s->node[node] = n; |
| init_kmem_cache_node(n, s); |
| } |
| return 1; |
| } |
| #else |
| static void free_kmem_cache_nodes(struct kmem_cache *s) |
| { |
| } |
| |
| static int init_kmem_cache_nodes(struct kmem_cache *s, gfp_t gfpflags) |
| { |
| init_kmem_cache_node(&s->local_node, s); |
| return 1; |
| } |
| #endif |
| |
| static void set_min_partial(struct kmem_cache *s, unsigned long min) |
| { |
| if (min < MIN_PARTIAL) |
| min = MIN_PARTIAL; |
| else if (min > MAX_PARTIAL) |
| min = MAX_PARTIAL; |
| s->min_partial = min; |
| } |
| |
| /* |
| * calculate_sizes() determines the order and the distribution of data within |
| * a slab object. |
| */ |
| static int calculate_sizes(struct kmem_cache *s, int forced_order) |
| { |
| unsigned long flags = s->flags; |
| unsigned long size = s->objsize; |
| unsigned long align = s->align; |
| int order; |
| |
| /* |
| * Round up object size to the next word boundary. We can only |
| * place the free pointer at word boundaries and this determines |
| * the possible location of the free pointer. |
| */ |
| size = ALIGN(size, sizeof(void *)); |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| /* |
| * Determine if we can poison the object itself. If the user of |
| * the slab may touch the object after free or before allocation |
| * then we should never poison the object itself. |
| */ |
| if ((flags & SLAB_POISON) && !(flags & SLAB_DESTROY_BY_RCU) && |
| !s->ctor) |
| s->flags |= __OBJECT_POISON; |
| else |
| s->flags &= ~__OBJECT_POISON; |
| |
| |
| /* |
| * If we are Redzoning then check if there is some space between the |
| * end of the object and the free pointer. If not then add an |
| * additional word to have some bytes to store Redzone information. |
| */ |
| if ((flags & SLAB_RED_ZONE) && size == s->objsize) |
| size += sizeof(void *); |
| #endif |
| |
| /* |
| * With that we have determined the number of bytes in actual use |
| * by the object. This is the potential offset to the free pointer. |
| */ |
| s->inuse = size; |
| |
| if (((flags & (SLAB_DESTROY_BY_RCU | SLAB_POISON)) || |
| s->ctor)) { |
| /* |
| * Relocate free pointer after the object if it is not |
| * permitted to overwrite the first word of the object on |
| * kmem_cache_free. |
| * |
| * This is the case if we do RCU, have a constructor or |
| * destructor or are poisoning the objects. |
| */ |
| s->offset = size; |
| size += sizeof(void *); |
| } |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| if (flags & SLAB_STORE_USER) |
| /* |
| * Need to store information about allocs and frees after |
| * the object. |
| */ |
| size += 2 * sizeof(struct track); |
| |
| if (flags & SLAB_RED_ZONE) |
| /* |
| * Add some empty padding so that we can catch |
| * overwrites from earlier objects rather than let |
| * tracking information or the free pointer be |
| * corrupted if a user writes before the start |
| * of the object. |
| */ |
| size += sizeof(void *); |
| #endif |
| |
| /* |
| * Determine the alignment based on various parameters that the |
| * user specified and the dynamic determination of cache line size |
| * on bootup. |
| */ |
| align = calculate_alignment(flags, align, s->objsize); |
| s->align = align; |
| |
| /* |
| * SLUB stores one object immediately after another beginning from |
| * offset 0. In order to align the objects we have to simply size |
| * each object to conform to the alignment. |
| */ |
| size = ALIGN(size, align); |
| s->size = size; |
| if (forced_order >= 0) |
| order = forced_order; |
| else |
| order = calculate_order(size); |
| |
| if (order < 0) |
| return 0; |
| |
| s->allocflags = 0; |
| if (order) |
| s->allocflags |= __GFP_COMP; |
| |
| if (s->flags & SLAB_CACHE_DMA) |
| s->allocflags |= SLUB_DMA; |
| |
| if (s->flags & SLAB_RECLAIM_ACCOUNT) |
| s->allocflags |= __GFP_RECLAIMABLE; |
| |
| /* |
| * Determine the number of objects per slab |
| */ |
| s->oo = oo_make(order, size); |
| s->min = oo_make(get_order(size), size); |
| if (oo_objects(s->oo) > oo_objects(s->max)) |
| s->max = s->oo; |
| |
| return !!oo_objects(s->oo); |
| |
| } |
| |
| static int kmem_cache_open(struct kmem_cache *s, gfp_t gfpflags, |
| const char *name, size_t size, |
| size_t align, unsigned long flags, |
| void (*ctor)(void *)) |
| { |
| memset(s, 0, kmem_size); |
| s->name = name; |
| s->ctor = ctor; |
| s->objsize = size; |
| s->align = align; |
| s->flags = kmem_cache_flags(size, flags, name, ctor); |
| |
| if (!calculate_sizes(s, -1)) |
| goto error; |
| if (disable_higher_order_debug) { |
| /* |
| * Disable debugging flags that store metadata if the min slab |
| * order increased. |
| */ |
| if (get_order(s->size) > get_order(s->objsize)) { |
| s->flags &= ~DEBUG_METADATA_FLAGS; |
| s->offset = 0; |
| if (!calculate_sizes(s, -1)) |
| goto error; |
| } |
| } |
| |
| /* |
| * The larger the object size is, the more pages we want on the partial |
| * list to avoid pounding the page allocator excessively. |
| */ |
| set_min_partial(s, ilog2(s->size)); |
| s->refcount = 1; |
| #ifdef CONFIG_NUMA |
| s->remote_node_defrag_ratio = 1000; |
| #endif |
| if (!init_kmem_cache_nodes(s, gfpflags & ~SLUB_DMA)) |
| goto error; |
| |
| if (alloc_kmem_cache_cpus(s, gfpflags & ~SLUB_DMA)) |
| return 1; |
| free_kmem_cache_nodes(s); |
| error: |
| if (flags & SLAB_PANIC) |
| panic("Cannot create slab %s size=%lu realsize=%u " |
| "order=%u offset=%u flags=%lx\n", |
| s->name, (unsigned long)size, s->size, oo_order(s->oo), |
| s->offset, flags); |
| return 0; |
| } |
| |
| /* |
| * Check if a given pointer is valid |
| */ |
| int kmem_ptr_validate(struct kmem_cache *s, const void *object) |
| { |
| struct page *page; |
| |
| page = get_object_page(object); |
| |
| if (!page || s != page->slab) |
| /* No slab or wrong slab */ |
| return 0; |
| |
| if (!check_valid_pointer(s, page, object)) |
| return 0; |
| |
| /* |
| * We could also check if the object is on the slabs freelist. |
| * But this would be too expensive and it seems that the main |
| * purpose of kmem_ptr_valid() is to check if the object belongs |
| * to a certain slab. |
| */ |
| return 1; |
| } |
| EXPORT_SYMBOL(kmem_ptr_validate); |
| |
| /* |
| * Determine the size of a slab object |
| */ |
| unsigned int kmem_cache_size(struct kmem_cache *s) |
| { |
| return s->objsize; |
| } |
| EXPORT_SYMBOL(kmem_cache_size); |
| |
| const char *kmem_cache_name(struct kmem_cache *s) |
| { |
| return s->name; |
| } |
| EXPORT_SYMBOL(kmem_cache_name); |
| |
| static void list_slab_objects(struct kmem_cache *s, struct page *page, |
| const char *text) |
| { |
| #ifdef CONFIG_SLUB_DEBUG |
| void *addr = page_address(page); |
| void *p; |
| DECLARE_BITMAP(map, page->objects); |
| |
| bitmap_zero(map, page->objects); |
| slab_err(s, page, "%s", text); |
| slab_lock(page); |
| for_each_free_object(p, s, page->freelist) |
| set_bit(slab_index(p, s, addr), map); |
| |
| for_each_object(p, s, addr, page->objects) { |
| |
| if (!test_bit(slab_index(p, s, addr), map)) { |
| printk(KERN_ERR "INFO: Object 0x%p @offset=%tu\n", |
| p, p - addr); |
| print_tracking(s, p); |
| } |
| } |
| slab_unlock(page); |
| #endif |
| } |
| |
| /* |
| * Attempt to free all partial slabs on a node. |
| */ |
| static void free_partial(struct kmem_cache *s, struct kmem_cache_node *n) |
| { |
| unsigned long flags; |
| struct page *page, *h; |
| |
| spin_lock_irqsave(&n->list_lock, flags); |
| list_for_each_entry_safe(page, h, &n->partial, lru) { |
| if (!page->inuse) { |
| list_del(&page->lru); |
| discard_slab(s, page); |
| n->nr_partial--; |
| } else { |
| list_slab_objects(s, page, |
| "Objects remaining on kmem_cache_close()"); |
| } |
| } |
| spin_unlock_irqrestore(&n->list_lock, flags); |
| } |
| |
| /* |
| * Release all resources used by a slab cache. |
| */ |
| static inline int kmem_cache_close(struct kmem_cache *s) |
| { |
| int node; |
| |
| flush_all(s); |
| |
| /* Attempt to free all objects */ |
| free_kmem_cache_cpus(s); |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| free_partial(s, n); |
| if (n->nr_partial || slabs_node(s, node)) |
| return 1; |
| } |
| free_kmem_cache_nodes(s); |
| return 0; |
| } |
| |
| /* |
| * Close a cache and release the kmem_cache structure |
| * (must be used for caches created using kmem_cache_create) |
| */ |
| void kmem_cache_destroy(struct kmem_cache *s) |
| { |
| down_write(&slub_lock); |
| s->refcount--; |
| if (!s->refcount) { |
| list_del(&s->list); |
| up_write(&slub_lock); |
| if (kmem_cache_close(s)) { |
| printk(KERN_ERR "SLUB %s: %s called for cache that " |
| "still has objects.\n", s->name, __func__); |
| dump_stack(); |
| } |
| if (s->flags & SLAB_DESTROY_BY_RCU) |
| rcu_barrier(); |
| sysfs_slab_remove(s); |
| } else |
| up_write(&slub_lock); |
| } |
| EXPORT_SYMBOL(kmem_cache_destroy); |
| |
| /******************************************************************** |
| * Kmalloc subsystem |
| *******************************************************************/ |
| |
| struct kmem_cache kmalloc_caches[SLUB_PAGE_SHIFT] __cacheline_aligned; |
| EXPORT_SYMBOL(kmalloc_caches); |
| |
| static int __init setup_slub_min_order(char *str) |
| { |
| get_option(&str, &slub_min_order); |
| |
| return 1; |
| } |
| |
| __setup("slub_min_order=", setup_slub_min_order); |
| |
| static int __init setup_slub_max_order(char *str) |
| { |
| get_option(&str, &slub_max_order); |
| slub_max_order = min(slub_max_order, MAX_ORDER - 1); |
| |
| return 1; |
| } |
| |
| __setup("slub_max_order=", setup_slub_max_order); |
| |
| static int __init setup_slub_min_objects(char *str) |
| { |
| get_option(&str, &slub_min_objects); |
| |
| return 1; |
| } |
| |
| __setup("slub_min_objects=", setup_slub_min_objects); |
| |
| static int __init setup_slub_nomerge(char *str) |
| { |
| slub_nomerge = 1; |
| return 1; |
| } |
| |
| __setup("slub_nomerge", setup_slub_nomerge); |
| |
| static struct kmem_cache *create_kmalloc_cache(struct kmem_cache *s, |
| const char *name, int size, gfp_t gfp_flags) |
| { |
| unsigned int flags = 0; |
| |
| if (gfp_flags & SLUB_DMA) |
| flags = SLAB_CACHE_DMA; |
| |
| /* |
| * This function is called with IRQs disabled during early-boot on |
| * single CPU so there's no need to take slub_lock here. |
| */ |
| if (!kmem_cache_open(s, gfp_flags, name, size, ARCH_KMALLOC_MINALIGN, |
| flags, NULL)) |
| goto panic; |
| |
| list_add(&s->list, &slab_caches); |
| |
| if (sysfs_slab_add(s)) |
| goto panic; |
| return s; |
| |
| panic: |
| panic("Creation of kmalloc slab %s size=%d failed.\n", name, size); |
| } |
| |
| #ifdef CONFIG_ZONE_DMA |
| static struct kmem_cache *kmalloc_caches_dma[SLUB_PAGE_SHIFT]; |
| |
| static void sysfs_add_func(struct work_struct *w) |
| { |
| struct kmem_cache *s; |
| |
| down_write(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) { |
| if (s->flags & __SYSFS_ADD_DEFERRED) { |
| s->flags &= ~__SYSFS_ADD_DEFERRED; |
| sysfs_slab_add(s); |
| } |
| } |
| up_write(&slub_lock); |
| } |
| |
| static DECLARE_WORK(sysfs_add_work, sysfs_add_func); |
| |
| static noinline struct kmem_cache *dma_kmalloc_cache(int index, gfp_t flags) |
| { |
| struct kmem_cache *s; |
| char *text; |
| size_t realsize; |
| unsigned long slabflags; |
| |
| s = kmalloc_caches_dma[index]; |
| if (s) |
| return s; |
| |
| /* Dynamically create dma cache */ |
| if (flags & __GFP_WAIT) |
| down_write(&slub_lock); |
| else { |
| if (!down_write_trylock(&slub_lock)) |
| goto out; |
| } |
| |
| if (kmalloc_caches_dma[index]) |
| goto unlock_out; |
| |
| realsize = kmalloc_caches[index].objsize; |
| text = kasprintf(flags & ~SLUB_DMA, "kmalloc_dma-%d", |
| (unsigned int)realsize); |
| s = kmalloc(kmem_size, flags & ~SLUB_DMA); |
| |
| /* |
| * Must defer sysfs creation to a workqueue because we don't know |
| * what context we are called from. Before sysfs comes up, we don't |
| * need to do anything because our sysfs initcall will start by |
| * adding all existing slabs to sysfs. |
| */ |
| slabflags = SLAB_CACHE_DMA|SLAB_NOTRACK; |
| if (slab_state >= SYSFS) |
| slabflags |= __SYSFS_ADD_DEFERRED; |
| |
| if (!s || !text || !kmem_cache_open(s, flags, text, |
| realsize, ARCH_KMALLOC_MINALIGN, slabflags, NULL)) { |
| kfree(s); |
| kfree(text); |
| goto unlock_out; |
| } |
| |
| list_add(&s->list, &slab_caches); |
| kmalloc_caches_dma[index] = s; |
| |
| if (slab_state >= SYSFS) |
| schedule_work(&sysfs_add_work); |
| |
| unlock_out: |
| up_write(&slub_lock); |
| out: |
| return kmalloc_caches_dma[index]; |
| } |
| #endif |
| |
| /* |
| * Conversion table for small slabs sizes / 8 to the index in the |
| * kmalloc array. This is necessary for slabs < 192 since we have non power |
| * of two cache sizes there. The size of larger slabs can be determined using |
| * fls. |
| */ |
| static s8 size_index[24] = { |
| 3, /* 8 */ |
| 4, /* 16 */ |
| 5, /* 24 */ |
| 5, /* 32 */ |
| 6, /* 40 */ |
| 6, /* 48 */ |
| 6, /* 56 */ |
| 6, /* 64 */ |
| 1, /* 72 */ |
| 1, /* 80 */ |
| 1, /* 88 */ |
| 1, /* 96 */ |
| 7, /* 104 */ |
| 7, /* 112 */ |
| 7, /* 120 */ |
| 7, /* 128 */ |
| 2, /* 136 */ |
| 2, /* 144 */ |
| 2, /* 152 */ |
| 2, /* 160 */ |
| 2, /* 168 */ |
| 2, /* 176 */ |
| 2, /* 184 */ |
| 2 /* 192 */ |
| }; |
| |
| static inline int size_index_elem(size_t bytes) |
| { |
| return (bytes - 1) / 8; |
| } |
| |
| static struct kmem_cache *get_slab(size_t size, gfp_t flags) |
| { |
| int index; |
| |
| if (size <= 192) { |
| if (!size) |
| return ZERO_SIZE_PTR; |
| |
| index = size_index[size_index_elem(size)]; |
| } else |
| index = fls(size - 1); |
| |
| #ifdef CONFIG_ZONE_DMA |
| if (unlikely((flags & SLUB_DMA))) |
| return dma_kmalloc_cache(index, flags); |
| |
| #endif |
| return &kmalloc_caches[index]; |
| } |
| |
| void *__kmalloc(size_t size, gfp_t flags) |
| { |
| struct kmem_cache *s; |
| void *ret; |
| |
| if (unlikely(size > SLUB_MAX_SIZE)) |
| return kmalloc_large(size, flags); |
| |
| s = get_slab(size, flags); |
| |
| if (unlikely(ZERO_OR_NULL_PTR(s))) |
| return s; |
| |
| ret = slab_alloc(s, flags, -1, _RET_IP_); |
| |
| trace_kmalloc(_RET_IP_, ret, size, s->size, flags); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(__kmalloc); |
| |
| static void *kmalloc_large_node(size_t size, gfp_t flags, int node) |
| { |
| struct page *page; |
| void *ptr = NULL; |
| |
| flags |= __GFP_COMP | __GFP_NOTRACK; |
| page = alloc_pages_node(node, flags, get_order(size)); |
| if (page) |
| ptr = page_address(page); |
| |
| kmemleak_alloc(ptr, size, 1, flags); |
| return ptr; |
| } |
| |
| #ifdef CONFIG_NUMA |
| void *__kmalloc_node(size_t size, gfp_t flags, int node) |
| { |
| struct kmem_cache *s; |
| void *ret; |
| |
| if (unlikely(size > SLUB_MAX_SIZE)) { |
| ret = kmalloc_large_node(size, flags, node); |
| |
| trace_kmalloc_node(_RET_IP_, ret, |
| size, PAGE_SIZE << get_order(size), |
| flags, node); |
| |
| return ret; |
| } |
| |
| s = get_slab(size, flags); |
| |
| if (unlikely(ZERO_OR_NULL_PTR(s))) |
| return s; |
| |
| ret = slab_alloc(s, flags, node, _RET_IP_); |
| |
| trace_kmalloc_node(_RET_IP_, ret, size, s->size, flags, node); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(__kmalloc_node); |
| #endif |
| |
| size_t ksize(const void *object) |
| { |
| struct page *page; |
| struct kmem_cache *s; |
| |
| if (unlikely(object == ZERO_SIZE_PTR)) |
| return 0; |
| |
| page = virt_to_head_page(object); |
| |
| if (unlikely(!PageSlab(page))) { |
| WARN_ON(!PageCompound(page)); |
| return PAGE_SIZE << compound_order(page); |
| } |
| s = page->slab; |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| /* |
| * Debugging requires use of the padding between object |
| * and whatever may come after it. |
| */ |
| if (s->flags & (SLAB_RED_ZONE | SLAB_POISON)) |
| return s->objsize; |
| |
| #endif |
| /* |
| * If we have the need to store the freelist pointer |
| * back there or track user information then we can |
| * only use the space before that information. |
| */ |
| if (s->flags & (SLAB_DESTROY_BY_RCU | SLAB_STORE_USER)) |
| return s->inuse; |
| /* |
| * Else we can use all the padding etc for the allocation |
| */ |
| return s->size; |
| } |
| EXPORT_SYMBOL(ksize); |
| |
| void kfree(const void *x) |
| { |
| struct page *page; |
| void *object = (void *)x; |
| |
| trace_kfree(_RET_IP_, x); |
| |
| if (unlikely(ZERO_OR_NULL_PTR(x))) |
| return; |
| |
| page = virt_to_head_page(x); |
| if (unlikely(!PageSlab(page))) { |
| BUG_ON(!PageCompound(page)); |
| kmemleak_free(x); |
| put_page(page); |
| return; |
| } |
| slab_free(page->slab, page, object, _RET_IP_); |
| } |
| EXPORT_SYMBOL(kfree); |
| |
| /* |
| * kmem_cache_shrink removes empty slabs from the partial lists and sorts |
| * the remaining slabs by the number of items in use. The slabs with the |
| * most items in use come first. New allocations will then fill those up |
| * and thus they can be removed from the partial lists. |
| * |
| * The slabs with the least items are placed last. This results in them |
| * being allocated from last increasing the chance that the last objects |
| * are freed in them. |
| */ |
| int kmem_cache_shrink(struct kmem_cache *s) |
| { |
| int node; |
| int i; |
| struct kmem_cache_node *n; |
| struct page *page; |
| struct page *t; |
| int objects = oo_objects(s->max); |
| struct list_head *slabs_by_inuse = |
| kmalloc(sizeof(struct list_head) * objects, GFP_KERNEL); |
| unsigned long flags; |
| |
| if (!slabs_by_inuse) |
| return -ENOMEM; |
| |
| flush_all(s); |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| n = get_node(s, node); |
| |
| if (!n->nr_partial) |
| continue; |
| |
| for (i = 0; i < objects; i++) |
| INIT_LIST_HEAD(slabs_by_inuse + i); |
| |
| spin_lock_irqsave(&n->list_lock, flags); |
| |
| /* |
| * Build lists indexed by the items in use in each slab. |
| * |
| * Note that concurrent frees may occur while we hold the |
| * list_lock. page->inuse here is the upper limit. |
| */ |
| list_for_each_entry_safe(page, t, &n->partial, lru) { |
| if (!page->inuse && slab_trylock(page)) { |
| /* |
| * Must hold slab lock here because slab_free |
| * may have freed the last object and be |
| * waiting to release the slab. |
| */ |
| list_del(&page->lru); |
| n->nr_partial--; |
| slab_unlock(page); |
| discard_slab(s, page); |
| } else { |
| list_move(&page->lru, |
| slabs_by_inuse + page->inuse); |
| } |
| } |
| |
| /* |
| * Rebuild the partial list with the slabs filled up most |
| * first and the least used slabs at the end. |
| */ |
| for (i = objects - 1; i >= 0; i--) |
| list_splice(slabs_by_inuse + i, n->partial.prev); |
| |
| spin_unlock_irqrestore(&n->list_lock, flags); |
| } |
| |
| kfree(slabs_by_inuse); |
| return 0; |
| } |
| EXPORT_SYMBOL(kmem_cache_shrink); |
| |
| #if defined(CONFIG_NUMA) && defined(CONFIG_MEMORY_HOTPLUG) |
| static int slab_mem_going_offline_callback(void *arg) |
| { |
| struct kmem_cache *s; |
| |
| down_read(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) |
| kmem_cache_shrink(s); |
| up_read(&slub_lock); |
| |
| return 0; |
| } |
| |
| static void slab_mem_offline_callback(void *arg) |
| { |
| struct kmem_cache_node *n; |
| struct kmem_cache *s; |
| struct memory_notify *marg = arg; |
| int offline_node; |
| |
| offline_node = marg->status_change_nid; |
| |
| /* |
| * If the node still has available memory. we need kmem_cache_node |
| * for it yet. |
| */ |
| if (offline_node < 0) |
| return; |
| |
| down_read(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) { |
| n = get_node(s, offline_node); |
| if (n) { |
| /* |
| * if n->nr_slabs > 0, slabs still exist on the node |
| * that is going down. We were unable to free them, |
| * and offline_pages() function shoudn't call this |
| * callback. So, we must fail. |
| */ |
| BUG_ON(slabs_node(s, offline_node)); |
| |
| s->node[offline_node] = NULL; |
| kmem_cache_free(kmalloc_caches, n); |
| } |
| } |
| up_read(&slub_lock); |
| } |
| |
| static int slab_mem_going_online_callback(void *arg) |
| { |
| struct kmem_cache_node *n; |
| struct kmem_cache *s; |
| struct memory_notify *marg = arg; |
| int nid = marg->status_change_nid; |
| int ret = 0; |
| |
| /* |
| * If the node's memory is already available, then kmem_cache_node is |
| * already created. Nothing to do. |
| */ |
| if (nid < 0) |
| return 0; |
| |
| /* |
| * We are bringing a node online. No memory is available yet. We must |
| * allocate a kmem_cache_node structure in order to bring the node |
| * online. |
| */ |
| down_read(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) { |
| /* |
| * XXX: kmem_cache_alloc_node will fallback to other nodes |
| * since memory is not yet available from the node that |
| * is brought up. |
| */ |
| n = kmem_cache_alloc(kmalloc_caches, GFP_KERNEL); |
| if (!n) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| init_kmem_cache_node(n, s); |
| s->node[nid] = n; |
| } |
| out: |
| up_read(&slub_lock); |
| return ret; |
| } |
| |
| static int slab_memory_callback(struct notifier_block *self, |
| unsigned long action, void *arg) |
| { |
| int ret = 0; |
| |
| switch (action) { |
| case MEM_GOING_ONLINE: |
| ret = slab_mem_going_online_callback(arg); |
| break; |
| case MEM_GOING_OFFLINE: |
| ret = slab_mem_going_offline_callback(arg); |
| break; |
| case MEM_OFFLINE: |
| case MEM_CANCEL_ONLINE: |
| slab_mem_offline_callback(arg); |
| break; |
| case MEM_ONLINE: |
| case MEM_CANCEL_OFFLINE: |
| break; |
| } |
| if (ret) |
| ret = notifier_from_errno(ret); |
| else |
| ret = NOTIFY_OK; |
| return ret; |
| } |
| |
| #endif /* CONFIG_MEMORY_HOTPLUG */ |
| |
| /******************************************************************** |
| * Basic setup of slabs |
| *******************************************************************/ |
| |
| void __init kmem_cache_init(void) |
| { |
| int i; |
| int caches = 0; |
| |
| init_alloc_cpu(); |
| |
| #ifdef CONFIG_NUMA |
| /* |
| * Must first have the slab cache available for the allocations of the |
| * struct kmem_cache_node's. There is special bootstrap code in |
| * kmem_cache_open for slab_state == DOWN. |
| */ |
| create_kmalloc_cache(&kmalloc_caches[0], "kmem_cache_node", |
| sizeof(struct kmem_cache_node), GFP_NOWAIT); |
| kmalloc_caches[0].refcount = -1; |
| caches++; |
| |
| hotplug_memory_notifier(slab_memory_callback, SLAB_CALLBACK_PRI); |
| #endif |
| |
| /* Able to allocate the per node structures */ |
| slab_state = PARTIAL; |
| |
| /* Caches that are not of the two-to-the-power-of size */ |
| if (KMALLOC_MIN_SIZE <= 32) { |
| create_kmalloc_cache(&kmalloc_caches[1], |
| "kmalloc-96", 96, GFP_NOWAIT); |
| caches++; |
| } |
| if (KMALLOC_MIN_SIZE <= 64) { |
| create_kmalloc_cache(&kmalloc_caches[2], |
| "kmalloc-192", 192, GFP_NOWAIT); |
| caches++; |
| } |
| |
| for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++) { |
| create_kmalloc_cache(&kmalloc_caches[i], |
| "kmalloc", 1 << i, GFP_NOWAIT); |
| caches++; |
| } |
| |
| |
| /* |
| * Patch up the size_index table if we have strange large alignment |
| * requirements for the kmalloc array. This is only the case for |
| * MIPS it seems. The standard arches will not generate any code here. |
| * |
| * Largest permitted alignment is 256 bytes due to the way we |
| * handle the index determination for the smaller caches. |
| * |
| * Make sure that nothing crazy happens if someone starts tinkering |
| * around with ARCH_KMALLOC_MINALIGN |
| */ |
| BUILD_BUG_ON(KMALLOC_MIN_SIZE > 256 || |
| (KMALLOC_MIN_SIZE & (KMALLOC_MIN_SIZE - 1))); |
| |
| for (i = 8; i < KMALLOC_MIN_SIZE; i += 8) { |
| int elem = size_index_elem(i); |
| if (elem >= ARRAY_SIZE(size_index)) |
| break; |
| size_index[elem] = KMALLOC_SHIFT_LOW; |
| } |
| |
| if (KMALLOC_MIN_SIZE == 64) { |
| /* |
| * The 96 byte size cache is not used if the alignment |
| * is 64 byte. |
| */ |
| for (i = 64 + 8; i <= 96; i += 8) |
| size_index[size_index_elem(i)] = 7; |
| } else if (KMALLOC_MIN_SIZE == 128) { |
| /* |
| * The 192 byte sized cache is not used if the alignment |
| * is 128 byte. Redirect kmalloc to use the 256 byte cache |
| * instead. |
| */ |
| for (i = 128 + 8; i <= 192; i += 8) |
| size_index[size_index_elem(i)] = 8; |
| } |
| |
| slab_state = UP; |
| |
| /* Provide the correct kmalloc names now that the caches are up */ |
| for (i = KMALLOC_SHIFT_LOW; i < SLUB_PAGE_SHIFT; i++) |
| kmalloc_caches[i]. name = |
| kasprintf(GFP_NOWAIT, "kmalloc-%d", 1 << i); |
| |
| #ifdef CONFIG_SMP |
| register_cpu_notifier(&slab_notifier); |
| kmem_size = offsetof(struct kmem_cache, cpu_slab) + |
| nr_cpu_ids * sizeof(struct kmem_cache_cpu *); |
| #else |
| kmem_size = sizeof(struct kmem_cache); |
| #endif |
| |
| printk(KERN_INFO |
| "SLUB: Genslabs=%d, HWalign=%d, Order=%d-%d, MinObjects=%d," |
| " CPUs=%d, Nodes=%d\n", |
| caches, cache_line_size(), |
| slub_min_order, slub_max_order, slub_min_objects, |
| nr_cpu_ids, nr_node_ids); |
| } |
| |
| void __init kmem_cache_init_late(void) |
| { |
| } |
| |
| /* |
| * Find a mergeable slab cache |
| */ |
| static int slab_unmergeable(struct kmem_cache *s) |
| { |
| if (slub_nomerge || (s->flags & SLUB_NEVER_MERGE)) |
| return 1; |
| |
| if (s->ctor) |
| return 1; |
| |
| /* |
| * We may have set a slab to be unmergeable during bootstrap. |
| */ |
| if (s->refcount < 0) |
| return 1; |
| |
| return 0; |
| } |
| |
| static struct kmem_cache *find_mergeable(size_t size, |
| size_t align, unsigned long flags, const char *name, |
| void (*ctor)(void *)) |
| { |
| struct kmem_cache *s; |
| |
| if (slub_nomerge || (flags & SLUB_NEVER_MERGE)) |
| return NULL; |
| |
| if (ctor) |
| return NULL; |
| |
| size = ALIGN(size, sizeof(void *)); |
| align = calculate_alignment(flags, align, size); |
| size = ALIGN(size, align); |
| flags = kmem_cache_flags(size, flags, name, NULL); |
| |
| list_for_each_entry(s, &slab_caches, list) { |
| if (slab_unmergeable(s)) |
| continue; |
| |
| if (size > s->size) |
| continue; |
| |
| if ((flags & SLUB_MERGE_SAME) != (s->flags & SLUB_MERGE_SAME)) |
| continue; |
| /* |
| * Check if alignment is compatible. |
| * Courtesy of Adrian Drzewiecki |
| */ |
| if ((s->size & ~(align - 1)) != s->size) |
| continue; |
| |
| if (s->size - size >= sizeof(void *)) |
| continue; |
| |
| return s; |
| } |
| return NULL; |
| } |
| |
| struct kmem_cache *kmem_cache_create(const char *name, size_t size, |
| size_t align, unsigned long flags, void (*ctor)(void *)) |
| { |
| struct kmem_cache *s; |
| |
| if (WARN_ON(!name)) |
| return NULL; |
| |
| down_write(&slub_lock); |
| s = find_mergeable(size, align, flags, name, ctor); |
| if (s) { |
| int cpu; |
| |
| s->refcount++; |
| /* |
| * Adjust the object sizes so that we clear |
| * the complete object on kzalloc. |
| */ |
| s->objsize = max(s->objsize, (int)size); |
| |
| /* |
| * And then we need to update the object size in the |
| * per cpu structures |
| */ |
| for_each_online_cpu(cpu) |
| get_cpu_slab(s, cpu)->objsize = s->objsize; |
| |
| s->inuse = max_t(int, s->inuse, ALIGN(size, sizeof(void *))); |
| up_write(&slub_lock); |
| |
| if (sysfs_slab_alias(s, name)) { |
| down_write(&slub_lock); |
| s->refcount--; |
| up_write(&slub_lock); |
| goto err; |
| } |
| return s; |
| } |
| |
| s = kmalloc(kmem_size, GFP_KERNEL); |
| if (s) { |
| if (kmem_cache_open(s, GFP_KERNEL, name, |
| size, align, flags, ctor)) { |
| list_add(&s->list, &slab_caches); |
| up_write(&slub_lock); |
| if (sysfs_slab_add(s)) { |
| down_write(&slub_lock); |
| list_del(&s->list); |
| up_write(&slub_lock); |
| kfree(s); |
| goto err; |
| } |
| return s; |
| } |
| kfree(s); |
| } |
| up_write(&slub_lock); |
| |
| err: |
| if (flags & SLAB_PANIC) |
| panic("Cannot create slabcache %s\n", name); |
| else |
| s = NULL; |
| return s; |
| } |
| EXPORT_SYMBOL(kmem_cache_create); |
| |
| #ifdef CONFIG_SMP |
| /* |
| * Use the cpu notifier to insure that the cpu slabs are flushed when |
| * necessary. |
| */ |
| static int __cpuinit slab_cpuup_callback(struct notifier_block *nfb, |
| unsigned long action, void *hcpu) |
| { |
| long cpu = (long)hcpu; |
| struct kmem_cache *s; |
| unsigned long flags; |
| |
| switch (action) { |
| case CPU_UP_PREPARE: |
| case CPU_UP_PREPARE_FROZEN: |
| init_alloc_cpu_cpu(cpu); |
| down_read(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) |
| s->cpu_slab[cpu] = alloc_kmem_cache_cpu(s, cpu, |
| GFP_KERNEL); |
| up_read(&slub_lock); |
| break; |
| |
| case CPU_UP_CANCELED: |
| case CPU_UP_CANCELED_FROZEN: |
| case CPU_DEAD: |
| case CPU_DEAD_FROZEN: |
| down_read(&slub_lock); |
| list_for_each_entry(s, &slab_caches, list) { |
| struct kmem_cache_cpu *c = get_cpu_slab(s, cpu); |
| |
| local_irq_save(flags); |
| __flush_cpu_slab(s, cpu); |
| local_irq_restore(flags); |
| free_kmem_cache_cpu(c, cpu); |
| s->cpu_slab[cpu] = NULL; |
| } |
| up_read(&slub_lock); |
| break; |
| default: |
| break; |
| } |
| return NOTIFY_OK; |
| } |
| |
| static struct notifier_block __cpuinitdata slab_notifier = { |
| .notifier_call = slab_cpuup_callback |
| }; |
| |
| #endif |
| |
| void *__kmalloc_track_caller(size_t size, gfp_t gfpflags, unsigned long caller) |
| { |
| struct kmem_cache *s; |
| void *ret; |
| |
| if (unlikely(size > SLUB_MAX_SIZE)) |
| return kmalloc_large(size, gfpflags); |
| |
| s = get_slab(size, gfpflags); |
| |
| if (unlikely(ZERO_OR_NULL_PTR(s))) |
| return s; |
| |
| ret = slab_alloc(s, gfpflags, -1, caller); |
| |
| /* Honor the call site pointer we recieved. */ |
| trace_kmalloc(caller, ret, size, s->size, gfpflags); |
| |
| return ret; |
| } |
| |
| void *__kmalloc_node_track_caller(size_t size, gfp_t gfpflags, |
| int node, unsigned long caller) |
| { |
| struct kmem_cache *s; |
| void *ret; |
| |
| if (unlikely(size > SLUB_MAX_SIZE)) |
| return kmalloc_large_node(size, gfpflags, node); |
| |
| s = get_slab(size, gfpflags); |
| |
| if (unlikely(ZERO_OR_NULL_PTR(s))) |
| return s; |
| |
| ret = slab_alloc(s, gfpflags, node, caller); |
| |
| /* Honor the call site pointer we recieved. */ |
| trace_kmalloc_node(caller, ret, size, s->size, gfpflags, node); |
| |
| return ret; |
| } |
| |
| #ifdef CONFIG_SLUB_DEBUG |
| static int count_inuse(struct page *page) |
| { |
| return page->inuse; |
| } |
| |
| static int count_total(struct page *page) |
| { |
| return page->objects; |
| } |
| |
| static int validate_slab(struct kmem_cache *s, struct page *page, |
| unsigned long *map) |
| { |
| void *p; |
| void *addr = page_address(page); |
| |
| if (!check_slab(s, page) || |
| !on_freelist(s, page, NULL)) |
| return 0; |
| |
| /* Now we know that a valid freelist exists */ |
| bitmap_zero(map, page->objects); |
| |
| for_each_free_object(p, s, page->freelist) { |
| set_bit(slab_index(p, s, addr), map); |
| if (!check_object(s, page, p, 0)) |
| return 0; |
| } |
| |
| for_each_object(p, s, addr, page->objects) |
| if (!test_bit(slab_index(p, s, addr), map)) |
| if (!check_object(s, page, p, 1)) |
| return 0; |
| return 1; |
| } |
| |
| static void validate_slab_slab(struct kmem_cache *s, struct page *page, |
| unsigned long *map) |
| { |
| if (slab_trylock(page)) { |
| validate_slab(s, page, map); |
| slab_unlock(page); |
| } else |
| printk(KERN_INFO "SLUB %s: Skipped busy slab 0x%p\n", |
| s->name, page); |
| |
| if (s->flags & DEBUG_DEFAULT_FLAGS) { |
| if (!PageSlubDebug(page)) |
| printk(KERN_ERR "SLUB %s: SlubDebug not set " |
| "on slab 0x%p\n", s->name, page); |
| } else { |
| if (PageSlubDebug(page)) |
| printk(KERN_ERR "SLUB %s: SlubDebug set on " |
| "slab 0x%p\n", s->name, page); |
| } |
| } |
| |
| static int validate_slab_node(struct kmem_cache *s, |
| struct kmem_cache_node *n, unsigned long *map) |
| { |
| unsigned long count = 0; |
| struct page *page; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&n->list_lock, flags); |
| |
| list_for_each_entry(page, &n->partial, lru) { |
| validate_slab_slab(s, page, map); |
| count++; |
| } |
| if (count != n->nr_partial) |
| printk(KERN_ERR "SLUB %s: %ld partial slabs counted but " |
| "counter=%ld\n", s->name, count, n->nr_partial); |
| |
| if (!(s->flags & SLAB_STORE_USER)) |
| goto out; |
| |
| list_for_each_entry(page, &n->full, lru) { |
| validate_slab_slab(s, page, map); |
| count++; |
| } |
| if (count != atomic_long_read(&n->nr_slabs)) |
| printk(KERN_ERR "SLUB: %s %ld slabs counted but " |
| "counter=%ld\n", s->name, count, |
| atomic_long_read(&n->nr_slabs)); |
| |
| out: |
| spin_unlock_irqrestore(&n->list_lock, flags); |
| return count; |
| } |
| |
| static long validate_slab_cache(struct kmem_cache *s) |
| { |
| int node; |
| unsigned long count = 0; |
| unsigned long *map = kmalloc(BITS_TO_LONGS(oo_objects(s->max)) * |
| sizeof(unsigned long), GFP_KERNEL); |
| |
| if (!map) |
| return -ENOMEM; |
| |
| flush_all(s); |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| count += validate_slab_node(s, n, map); |
| } |
| kfree(map); |
| return count; |
| } |
| |
| #ifdef SLUB_RESILIENCY_TEST |
| static void resiliency_test(void) |
| { |
| u8 *p; |
| |
| printk(KERN_ERR "SLUB resiliency testing\n"); |
| printk(KERN_ERR "-----------------------\n"); |
| printk(KERN_ERR "A. Corruption after allocation\n"); |
| |
| p = kzalloc(16, GFP_KERNEL); |
| p[16] = 0x12; |
| printk(KERN_ERR "\n1. kmalloc-16: Clobber Redzone/next pointer" |
| " 0x12->0x%p\n\n", p + 16); |
| |
| validate_slab_cache(kmalloc_caches + 4); |
| |
| /* Hmmm... The next two are dangerous */ |
| p = kzalloc(32, GFP_KERNEL); |
| p[32 + sizeof(void *)] = 0x34; |
| printk(KERN_ERR "\n2. kmalloc-32: Clobber next pointer/next slab" |
| " 0x34 -> -0x%p\n", p); |
| printk(KERN_ERR |
| "If allocated object is overwritten then not detectable\n\n"); |
| |
| validate_slab_cache(kmalloc_caches + 5); |
| p = kzalloc(64, GFP_KERNEL); |
| p += 64 + (get_cycles() & 0xff) * sizeof(void *); |
| *p = 0x56; |
| printk(KERN_ERR "\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n", |
| p); |
| printk(KERN_ERR |
| "If allocated object is overwritten then not detectable\n\n"); |
| validate_slab_cache(kmalloc_caches + 6); |
| |
| printk(KERN_ERR "\nB. Corruption after free\n"); |
| p = kzalloc(128, GFP_KERNEL); |
| kfree(p); |
| *p = 0x78; |
| printk(KERN_ERR "1. kmalloc-128: Clobber first word 0x78->0x%p\n\n", p); |
| validate_slab_cache(kmalloc_caches + 7); |
| |
| p = kzalloc(256, GFP_KERNEL); |
| kfree(p); |
| p[50] = 0x9a; |
| printk(KERN_ERR "\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", |
| p); |
| validate_slab_cache(kmalloc_caches + 8); |
| |
| p = kzalloc(512, GFP_KERNEL); |
| kfree(p); |
| p[512] = 0xab; |
| printk(KERN_ERR "\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p); |
| validate_slab_cache(kmalloc_caches + 9); |
| } |
| #else |
| static void resiliency_test(void) {}; |
| #endif |
| |
| /* |
| * Generate lists of code addresses where slabcache objects are allocated |
| * and freed. |
| */ |
| |
| struct location { |
| unsigned long count; |
| unsigned long addr; |
| long long sum_time; |
| long min_time; |
| long max_time; |
| long min_pid; |
| long max_pid; |
| DECLARE_BITMAP(cpus, NR_CPUS); |
| nodemask_t nodes; |
| }; |
| |
| struct loc_track { |
| unsigned long max; |
| unsigned long count; |
| struct location *loc; |
| }; |
| |
| static void free_loc_track(struct loc_track *t) |
| { |
| if (t->max) |
| free_pages((unsigned long)t->loc, |
| get_order(sizeof(struct location) * t->max)); |
| } |
| |
| static int alloc_loc_track(struct loc_track *t, unsigned long max, gfp_t flags) |
| { |
| struct location *l; |
| int order; |
| |
| order = get_order(sizeof(struct location) * max); |
| |
| l = (void *)__get_free_pages(flags, order); |
| if (!l) |
| return 0; |
| |
| if (t->count) { |
| memcpy(l, t->loc, sizeof(struct location) * t->count); |
| free_loc_track(t); |
| } |
| t->max = max; |
| t->loc = l; |
| return 1; |
| } |
| |
| static int add_location(struct loc_track *t, struct kmem_cache *s, |
| const struct track *track) |
| { |
| long start, end, pos; |
| struct location *l; |
| unsigned long caddr; |
| unsigned long age = jiffies - track->when; |
| |
| start = -1; |
| end = t->count; |
| |
| for ( ; ; ) { |
| pos = start + (end - start + 1) / 2; |
| |
| /* |
| * There is nothing at "end". If we end up there |
| * we need to add something to before end. |
| */ |
| if (pos == end) |
| break; |
| |
| caddr = t->loc[pos].addr; |
| if (track->addr == caddr) { |
| |
| l = &t->loc[pos]; |
| l->count++; |
| if (track->when) { |
| l->sum_time += age; |
| if (age < l->min_time) |
| l->min_time = age; |
| if (age > l->max_time) |
| l->max_time = age; |
| |
| if (track->pid < l->min_pid) |
| l->min_pid = track->pid; |
| if (track->pid > l->max_pid) |
| l->max_pid = track->pid; |
| |
| cpumask_set_cpu(track->cpu, |
| to_cpumask(l->cpus)); |
| } |
| node_set(page_to_nid(virt_to_page(track)), l->nodes); |
| return 1; |
| } |
| |
| if (track->addr < caddr) |
| end = pos; |
| else |
| start = pos; |
| } |
| |
| /* |
| * Not found. Insert new tracking element. |
| */ |
| if (t->count >= t->max && !alloc_loc_track(t, 2 * t->max, GFP_ATOMIC)) |
| return 0; |
| |
| l = t->loc + pos; |
| if (pos < t->count) |
| memmove(l + 1, l, |
| (t->count - pos) * sizeof(struct location)); |
| t->count++; |
| l->count = 1; |
| l->addr = track->addr; |
| l->sum_time = age; |
| l->min_time = age; |
| l->max_time = age; |
| l->min_pid = track->pid; |
| l->max_pid = track->pid; |
| cpumask_clear(to_cpumask(l->cpus)); |
| cpumask_set_cpu(track->cpu, to_cpumask(l->cpus)); |
| nodes_clear(l->nodes); |
| node_set(page_to_nid(virt_to_page(track)), l->nodes); |
| return 1; |
| } |
| |
| static void process_slab(struct loc_track *t, struct kmem_cache *s, |
| struct page *page, enum track_item alloc) |
| { |
| void *addr = page_address(page); |
| DECLARE_BITMAP(map, page->objects); |
| void *p; |
| |
| bitmap_zero(map, page->objects); |
| for_each_free_object(p, s, page->freelist) |
| set_bit(slab_index(p, s, addr), map); |
| |
| for_each_object(p, s, addr, page->objects) |
| if (!test_bit(slab_index(p, s, addr), map)) |
| add_location(t, s, get_track(s, p, alloc)); |
| } |
| |
| static int list_locations(struct kmem_cache *s, char *buf, |
| enum track_item alloc) |
| { |
| int len = 0; |
| unsigned long i; |
| struct loc_track t = { 0, 0, NULL }; |
| int node; |
| |
| if (!alloc_loc_track(&t, PAGE_SIZE / sizeof(struct location), |
| GFP_TEMPORARY)) |
| return sprintf(buf, "Out of memory\n"); |
| |
| /* Push back cpu slabs */ |
| flush_all(s); |
| |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = get_node(s, node); |
| unsigned long flags; |
| struct page *page; |
| |
| if (!atomic_long_read(&n->nr_slabs)) |
| continue; |
| |
| spin_lock_irqsave(&n->list_lock, flags); |
| list_for_each_entry(page, &n->partial, lru) |
| process_slab(&t, s, page, alloc); |
| list_for_each_entry(page, &n->full, lru) |
| process_slab(&t, s, page, alloc); |
| spin_unlock_irqrestore(&n->list_lock, flags); |
| } |
| |
| for (i = 0; i < t.count; i++) { |
| struct location *l = &t.loc[i]; |
| |
| if (len > PAGE_SIZE - KSYM_SYMBOL_LEN - 100) |
| break; |
| len += sprintf(buf + len, "%7ld ", l->count); |
| |
| if (l->addr) |
| len += sprint_symbol(buf + len, (unsigned long)l->addr); |
| else |
| len += sprintf(buf + len, "<not-available>"); |
| |
| if (l->sum_time != l->min_time) { |
| len += sprintf(buf + len, " age=%ld/%ld/%ld", |
| l->min_time, |
| (long)div_u64(l->sum_time, l->count), |
| l->max_time); |
| } else |
| len += sprintf(buf + len, " age=%ld", |
| l->min_time); |
| |
| if (l->min_pid != l->max_pid) |
| len += sprintf(buf + len, " pid=%ld-%ld", |
| l->min_pid, l->max_pid); |
| else |
| len += sprintf(buf + len, " pid=%ld", |
| l->min_pid); |
| |
| if (num_online_cpus() > 1 && |
| !cpumask_empty(to_cpumask(l->cpus)) && |
| len < PAGE_SIZE - 60) { |
| len += sprintf(buf + len, " cpus="); |
| len += cpulist_scnprintf(buf + len, PAGE_SIZE - len - 50, |
| to_cpumask(l->cpus)); |
| } |
| |
| if (nr_online_nodes > 1 && !nodes_empty(l->nodes) && |
| len < PAGE_SIZE - 60) { |
| len += sprintf(buf + len, " nodes="); |
| len += nodelist_scnprintf(buf + len, PAGE_SIZE - len - 50, |
| l->nodes); |
| } |
| |
| len += sprintf(buf + len, "\n"); |
| } |
| |
| free_loc_track(&t); |
| if (!t.count) |
| len += sprintf(buf, "No data\n"); |
| return len; |
| } |
| |
| enum slab_stat_type { |
| SL_ALL, /* All slabs */ |
| SL_PARTIAL, /* Only partially allocated slabs */ |
| SL_CPU, /* Only slabs used for cpu caches */ |
| SL_OBJECTS, /* Determine allocated objects not slabs */ |
| SL_TOTAL /* Determine object capacity not slabs */ |
| }; |
| |
| #define SO_ALL (1 << SL_ALL) |
| #define SO_PARTIAL (1 << SL_PARTIAL) |
| #define SO_CPU (1 << SL_CPU) |
| #define SO_OBJECTS (1 << SL_OBJECTS) |
| #define SO_TOTAL (1 << SL_TOTAL) |
| |
| static ssize_t show_slab_objects(struct kmem_cache *s, |
| char *buf, unsigned long flags) |
| { |
| unsigned long total = 0; |
| int node; |
| int x; |
| unsigned long *nodes; |
| unsigned long *per_cpu; |
| |
| nodes = kzalloc(2 * sizeof(unsigned long) * nr_node_ids, GFP_KERNEL); |
| if (!nodes) |
| return -ENOMEM; |
| per_cpu = nodes + nr_node_ids; |
| |
| if (flags & SO_CPU) { |
| int cpu; |
| |
| for_each_possible_cpu(cpu) { |
| struct kmem_cache_cpu *c = get_cpu_slab(s, cpu); |
| |
| if (!c || c->node < 0) |
| continue; |
| |
| if (c->page) { |
| if (flags & SO_TOTAL) |
| x = c->page->objects; |
| else if (flags & SO_OBJECTS) |
| x = c->page->inuse; |
| else |
| x = 1; |
| |
| total += x; |
| nodes[c->node] += x; |
| } |
| per_cpu[c->node]++; |
| } |
| } |
| |
| if (flags & SO_ALL) { |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| if (flags & SO_TOTAL) |
| x = atomic_long_read(&n->total_objects); |
| else if (flags & SO_OBJECTS) |
| x = atomic_long_read(&n->total_objects) - |
| count_partial(n, count_free); |
| |
| else |
| x = atomic_long_read(&n->nr_slabs); |
| total += x; |
| nodes[node] += x; |
| } |
| |
| } else if (flags & SO_PARTIAL) { |
| for_each_node_state(node, N_NORMAL_MEMORY) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| if (flags & SO_TOTAL) |
| x = count_partial(n, count_total); |
| else if (flags & SO_OBJECTS) |
| x = count_partial(n, count_inuse); |
| else |
| x = n->nr_partial; |
| total += x; |
| nodes[node] += x; |
| } |
| } |
| x = sprintf(buf, "%lu", total); |
| #ifdef CONFIG_NUMA |
| for_each_node_state(node, N_NORMAL_MEMORY) |
| if (nodes[node]) |
| x += sprintf(buf + x, " N%d=%lu", |
| node, nodes[node]); |
| #endif |
| kfree(nodes); |
| return x + sprintf(buf + x, "\n"); |
| } |
| |
| static int any_slab_objects(struct kmem_cache *s) |
| { |
| int node; |
| |
| for_each_online_node(node) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| if (!n) |
| continue; |
| |
| if (atomic_long_read(&n->total_objects)) |
| return 1; |
| } |
| return 0; |
| } |
| |
| #define to_slab_attr(n) container_of(n, struct slab_attribute, attr) |
| #define to_slab(n) container_of(n, struct kmem_cache, kobj); |
| |
| struct slab_attribute { |
| struct attribute attr; |
| ssize_t (*show)(struct kmem_cache *s, char *buf); |
| ssize_t (*store)(struct kmem_cache *s, const char *x, size_t count); |
| }; |
| |
| #define SLAB_ATTR_RO(_name) \ |
| static struct slab_attribute _name##_attr = __ATTR_RO(_name) |
| |
| #define SLAB_ATTR(_name) \ |
| static struct slab_attribute _name##_attr = \ |
| __ATTR(_name, 0644, _name##_show, _name##_store) |
| |
| static ssize_t slab_size_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", s->size); |
| } |
| SLAB_ATTR_RO(slab_size); |
| |
| static ssize_t align_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", s->align); |
| } |
| SLAB_ATTR_RO(align); |
| |
| static ssize_t object_size_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", s->objsize); |
| } |
| SLAB_ATTR_RO(object_size); |
| |
| static ssize_t objs_per_slab_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", oo_objects(s->oo)); |
| } |
| SLAB_ATTR_RO(objs_per_slab); |
| |
| static ssize_t order_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| unsigned long order; |
| int err; |
| |
| err = strict_strtoul(buf, 10, &order); |
| if (err) |
| return err; |
| |
| if (order > slub_max_order || order < slub_min_order) |
| return -EINVAL; |
| |
| calculate_sizes(s, order); |
| return length; |
| } |
| |
| static ssize_t order_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", oo_order(s->oo)); |
| } |
| SLAB_ATTR(order); |
| |
| static ssize_t min_partial_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%lu\n", s->min_partial); |
| } |
| |
| static ssize_t min_partial_store(struct kmem_cache *s, const char *buf, |
| size_t length) |
| { |
| unsigned long min; |
| int err; |
| |
| err = strict_strtoul(buf, 10, &min); |
| if (err) |
| return err; |
| |
| set_min_partial(s, min); |
| return length; |
| } |
| SLAB_ATTR(min_partial); |
| |
| static ssize_t ctor_show(struct kmem_cache *s, char *buf) |
| { |
| if (s->ctor) { |
| int n = sprint_symbol(buf, (unsigned long)s->ctor); |
| |
| return n + sprintf(buf + n, "\n"); |
| } |
| return 0; |
| } |
| SLAB_ATTR_RO(ctor); |
| |
| static ssize_t aliases_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", s->refcount - 1); |
| } |
| SLAB_ATTR_RO(aliases); |
| |
| static ssize_t slabs_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_ALL); |
| } |
| SLAB_ATTR_RO(slabs); |
| |
| static ssize_t partial_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_PARTIAL); |
| } |
| SLAB_ATTR_RO(partial); |
| |
| static ssize_t cpu_slabs_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_CPU); |
| } |
| SLAB_ATTR_RO(cpu_slabs); |
| |
| static ssize_t objects_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_ALL|SO_OBJECTS); |
| } |
| SLAB_ATTR_RO(objects); |
| |
| static ssize_t objects_partial_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_PARTIAL|SO_OBJECTS); |
| } |
| SLAB_ATTR_RO(objects_partial); |
| |
| static ssize_t total_objects_show(struct kmem_cache *s, char *buf) |
| { |
| return show_slab_objects(s, buf, SO_ALL|SO_TOTAL); |
| } |
| SLAB_ATTR_RO(total_objects); |
| |
| static ssize_t sanity_checks_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_DEBUG_FREE)); |
| } |
| |
| static ssize_t sanity_checks_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| s->flags &= ~SLAB_DEBUG_FREE; |
| if (buf[0] == '1') |
| s->flags |= SLAB_DEBUG_FREE; |
| return length; |
| } |
| SLAB_ATTR(sanity_checks); |
| |
| static ssize_t trace_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_TRACE)); |
| } |
| |
| static ssize_t trace_store(struct kmem_cache *s, const char *buf, |
| size_t length) |
| { |
| s->flags &= ~SLAB_TRACE; |
| if (buf[0] == '1') |
| s->flags |= SLAB_TRACE; |
| return length; |
| } |
| SLAB_ATTR(trace); |
| |
| static ssize_t reclaim_account_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_RECLAIM_ACCOUNT)); |
| } |
| |
| static ssize_t reclaim_account_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| s->flags &= ~SLAB_RECLAIM_ACCOUNT; |
| if (buf[0] == '1') |
| s->flags |= SLAB_RECLAIM_ACCOUNT; |
| return length; |
| } |
| SLAB_ATTR(reclaim_account); |
| |
| static ssize_t hwcache_align_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_HWCACHE_ALIGN)); |
| } |
| SLAB_ATTR_RO(hwcache_align); |
| |
| #ifdef CONFIG_ZONE_DMA |
| static ssize_t cache_dma_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_CACHE_DMA)); |
| } |
| SLAB_ATTR_RO(cache_dma); |
| #endif |
| |
| static ssize_t destroy_by_rcu_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_DESTROY_BY_RCU)); |
| } |
| SLAB_ATTR_RO(destroy_by_rcu); |
| |
| static ssize_t red_zone_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_RED_ZONE)); |
| } |
| |
| static ssize_t red_zone_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| if (any_slab_objects(s)) |
| return -EBUSY; |
| |
| s->flags &= ~SLAB_RED_ZONE; |
| if (buf[0] == '1') |
| s->flags |= SLAB_RED_ZONE; |
| calculate_sizes(s, -1); |
| return length; |
| } |
| SLAB_ATTR(red_zone); |
| |
| static ssize_t poison_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_POISON)); |
| } |
| |
| static ssize_t poison_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| if (any_slab_objects(s)) |
| return -EBUSY; |
| |
| s->flags &= ~SLAB_POISON; |
| if (buf[0] == '1') |
| s->flags |= SLAB_POISON; |
| calculate_sizes(s, -1); |
| return length; |
| } |
| SLAB_ATTR(poison); |
| |
| static ssize_t store_user_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", !!(s->flags & SLAB_STORE_USER)); |
| } |
| |
| static ssize_t store_user_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| if (any_slab_objects(s)) |
| return -EBUSY; |
| |
| s->flags &= ~SLAB_STORE_USER; |
| if (buf[0] == '1') |
| s->flags |= SLAB_STORE_USER; |
| calculate_sizes(s, -1); |
| return length; |
| } |
| SLAB_ATTR(store_user); |
| |
| static ssize_t validate_show(struct kmem_cache *s, char *buf) |
| { |
| return 0; |
| } |
| |
| static ssize_t validate_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| int ret = -EINVAL; |
| |
| if (buf[0] == '1') { |
| ret = validate_slab_cache(s); |
| if (ret >= 0) |
| ret = length; |
| } |
| return ret; |
| } |
| SLAB_ATTR(validate); |
| |
| static ssize_t shrink_show(struct kmem_cache *s, char *buf) |
| { |
| return 0; |
| } |
| |
| static ssize_t shrink_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| if (buf[0] == '1') { |
| int rc = kmem_cache_shrink(s); |
| |
| if (rc) |
| return rc; |
| } else |
| return -EINVAL; |
| return length; |
| } |
| SLAB_ATTR(shrink); |
| |
| static ssize_t alloc_calls_show(struct kmem_cache *s, char *buf) |
| { |
| if (!(s->flags & SLAB_STORE_USER)) |
| return -ENOSYS; |
| return list_locations(s, buf, TRACK_ALLOC); |
| } |
| SLAB_ATTR_RO(alloc_calls); |
| |
| static ssize_t free_calls_show(struct kmem_cache *s, char *buf) |
| { |
| if (!(s->flags & SLAB_STORE_USER)) |
| return -ENOSYS; |
| return list_locations(s, buf, TRACK_FREE); |
| } |
| SLAB_ATTR_RO(free_calls); |
| |
| #ifdef CONFIG_NUMA |
| static ssize_t remote_node_defrag_ratio_show(struct kmem_cache *s, char *buf) |
| { |
| return sprintf(buf, "%d\n", s->remote_node_defrag_ratio / 10); |
| } |
| |
| static ssize_t remote_node_defrag_ratio_store(struct kmem_cache *s, |
| const char *buf, size_t length) |
| { |
| unsigned long ratio; |
| int err; |
| |
| err = strict_strtoul(buf, 10, &ratio); |
| if (err) |
| return err; |
| |
| if (ratio <= 100) |
| s->remote_node_defrag_ratio = ratio * 10; |
| |
| return length; |
| } |
| SLAB_ATTR(remote_node_defrag_ratio); |
| #endif |
| |
| #ifdef CONFIG_SLUB_STATS |
| static int show_stat(struct kmem_cache *s, char *buf, enum stat_item si) |
| { |
| unsigned long sum = 0; |
| int cpu; |
| int len; |
| int *data = kmalloc(nr_cpu_ids * sizeof(int), GFP_KERNEL); |
| |
| if (!data) |
| return -ENOMEM; |
| |
| for_each_online_cpu(cpu) { |
| unsigned x = get_cpu_slab(s, cpu)->stat[si]; |
| |
| data[cpu] = x; |
| sum += x; |
| } |
| |
| len = sprintf(buf, "%lu", sum); |
| |
| #ifdef CONFIG_SMP |
| for_each_online_cpu(cpu) { |
| if (data[cpu] && len < PAGE_SIZE - 20) |
| len += sprintf(buf + len, " C%d=%u", cpu, data[cpu]); |
| } |
| #endif |
| kfree(data); |
| return len + sprintf(buf + len, "\n"); |
| } |
| |
| static void clear_stat(struct kmem_cache *s, enum stat_item si) |
| { |
| int cpu; |
| |
| for_each_online_cpu(cpu) |
| get_cpu_slab(s, cpu)->stat[si] = 0; |
| } |
| |
| #define STAT_ATTR(si, text) \ |
| static ssize_t text##_show(struct kmem_cache *s, char *buf) \ |
| { \ |
| return show_stat(s, buf, si); \ |
| } \ |
| static ssize_t text##_store(struct kmem_cache *s, \ |
| const char *buf, size_t length) \ |
| { \ |
| if (buf[0] != '0') \ |
| return -EINVAL; \ |
| clear_stat(s, si); \ |
| return length; \ |
| } \ |
| SLAB_ATTR(text); \ |
| |
| STAT_ATTR(ALLOC_FASTPATH, alloc_fastpath); |
| STAT_ATTR(ALLOC_SLOWPATH, alloc_slowpath); |
| STAT_ATTR(FREE_FASTPATH, free_fastpath); |
| STAT_ATTR(FREE_SLOWPATH, free_slowpath); |
| STAT_ATTR(FREE_FROZEN, free_frozen); |
| STAT_ATTR(FREE_ADD_PARTIAL, free_add_partial); |
| STAT_ATTR(FREE_REMOVE_PARTIAL, free_remove_partial); |
| STAT_ATTR(ALLOC_FROM_PARTIAL, alloc_from_partial); |
| STAT_ATTR(ALLOC_SLAB, alloc_slab); |
| STAT_ATTR(ALLOC_REFILL, alloc_refill); |
| STAT_ATTR(FREE_SLAB, free_slab); |
| STAT_ATTR(CPUSLAB_FLUSH, cpuslab_flush); |
| STAT_ATTR(DEACTIVATE_FULL, deactivate_full); |
| STAT_ATTR(DEACTIVATE_EMPTY, deactivate_empty); |
| STAT_ATTR(DEACTIVATE_TO_HEAD, deactivate_to_head); |
| STAT_ATTR(DEACTIVATE_TO_TAIL, deactivate_to_tail); |
| STAT_ATTR(DEACTIVATE_REMOTE_FREES, deactivate_remote_frees); |
| STAT_ATTR(ORDER_FALLBACK, order_fallback); |
| #endif |
| |
| static struct attribute *slab_attrs[] = { |
| &slab_size_attr.attr, |
| &object_size_attr.attr, |
| &objs_per_slab_attr.attr, |
| &order_attr.attr, |
| &min_partial_attr.attr, |
| &objects_attr.attr, |
| &objects_partial_attr.attr, |
| &total_objects_attr.attr, |
| &slabs_attr.attr, |
| &partial_attr.attr, |
| &cpu_slabs_attr.attr, |
| &ctor_attr.attr, |
| &aliases_attr.attr, |
| &align_attr.attr, |
| &sanity_checks_attr.attr, |
| &trace_attr.attr, |
| &hwcache_align_attr.attr, |
| &reclaim_account_attr.attr, |
| &destroy_by_rcu_attr.attr, |
| &red_zone_attr.attr, |
| &poison_attr.attr, |
| &store_user_attr.attr, |
| &validate_attr.attr, |
| &shrink_attr.attr, |
| &alloc_calls_attr.attr, |
| &free_calls_attr.attr, |
| #ifdef CONFIG_ZONE_DMA |
| &cache_dma_attr.attr, |
| #endif |
| #ifdef CONFIG_NUMA |
| &remote_node_defrag_ratio_attr.attr, |
| #endif |
| #ifdef CONFIG_SLUB_STATS |
| &alloc_fastpath_attr.attr, |
| &alloc_slowpath_attr.attr, |
| &free_fastpath_attr.attr, |
| &free_slowpath_attr.attr, |
| &free_frozen_attr.attr, |
| &free_add_partial_attr.attr, |
| &free_remove_partial_attr.attr, |
| &alloc_from_partial_attr.attr, |
| &alloc_slab_attr.attr, |
| &alloc_refill_attr.attr, |
| &free_slab_attr.attr, |
| &cpuslab_flush_attr.attr, |
| &deactivate_full_attr.attr, |
| &deactivate_empty_attr.attr, |
| &deactivate_to_head_attr.attr, |
| &deactivate_to_tail_attr.attr, |
| &deactivate_remote_frees_attr.attr, |
| &order_fallback_attr.attr, |
| #endif |
| NULL |
| }; |
| |
| static struct attribute_group slab_attr_group = { |
| .attrs = slab_attrs, |
| }; |
| |
| static ssize_t slab_attr_show(struct kobject *kobj, |
| struct attribute *attr, |
| char *buf) |
| { |
| struct slab_attribute *attribute; |
| struct kmem_cache *s; |
| int err; |
| |
| attribute = to_slab_attr(attr); |
| s = to_slab(kobj); |
| |
| if (!attribute->show) |
| return -EIO; |
| |
| err = attribute->show(s, buf); |
| |
| return err; |
| } |
| |
| static ssize_t slab_attr_store(struct kobject *kobj, |
| struct attribute *attr, |
| const char *buf, size_t len) |
| { |
| struct slab_attribute *attribute; |
| struct kmem_cache *s; |
| int err; |
| |
| attribute = to_slab_attr(attr); |
| s = to_slab(kobj); |
| |
| if (!attribute->store) |
| return -EIO; |
| |
| err = attribute->store(s, buf, len); |
| |
| return err; |
| } |
| |
| static void kmem_cache_release(struct kobject *kobj) |
| { |
| struct kmem_cache *s = to_slab(kobj); |
| |
| kfree(s); |
| } |
| |
| static struct sysfs_ops slab_sysfs_ops = { |
| .show = slab_attr_show, |
| .store = slab_attr_store, |
| }; |
| |
| static struct kobj_type slab_ktype = { |
| .sysfs_ops = &slab_sysfs_ops, |
| .release = kmem_cache_release |
| }; |
| |
| static int uevent_filter(struct kset *kset, struct kobject *kobj) |
| { |
| struct kobj_type *ktype = get_ktype(kobj); |
| |
| if (ktype == &slab_ktype) |
| return 1; |
| return 0; |
| } |
| |
| static struct kset_uevent_ops slab_uevent_ops = { |
| .filter = uevent_filter, |
| }; |
| |
| static struct kset *slab_kset; |
| |
| #define ID_STR_LENGTH 64 |
| |
| /* Create a unique string id for a slab cache: |
| * |
| * Format :[flags-]size |
| */ |
| static char *create_unique_id(struct kmem_cache *s) |
| { |
| char *name = kmalloc(ID_STR_LENGTH, GFP_KERNEL); |
| char *p = name; |
| |
| BUG_ON(!name); |
| |
| *p++ = ':'; |
| /* |
| * First flags affecting slabcache operations. We will only |
| * get here for aliasable slabs so we do not need to support |
| * too many flags. The flags here must cover all flags that |
| * are matched during merging to guarantee that the id is |
| * unique. |
| */ |
| if (s->flags & SLAB_CACHE_DMA) |
| *p++ = 'd'; |
| if (s->flags & SLAB_RECLAIM_ACCOUNT) |
| *p++ = 'a'; |
| if (s->flags & SLAB_DEBUG_FREE) |
| *p++ = 'F'; |
| if (!(s->flags & SLAB_NOTRACK)) |
| *p++ = 't'; |
| if (p != name + 1) |
| *p++ = '-'; |
| p += sprintf(p, "%07d", s->size); |
| BUG_ON(p > name + ID_STR_LENGTH - 1); |
| return name; |
| } |
| |
| static int sysfs_slab_add(struct kmem_cache *s) |
| { |
| int err; |
| const char *name; |
| int unmergeable; |
| |
| if (slab_state < SYSFS) |
| /* Defer until later */ |
| return 0; |
| |
| unmergeable = slab_unmergeable(s); |
| if (unmergeable) { |
| /* |
| * Slabcache can never be merged so we can use the name proper. |
| * This is typically the case for debug situations. In that |
| * case we can catch duplicate names easily. |
| */ |
| sysfs_remove_link(&slab_kset->kobj, s->name); |
| name = s->name; |
| } else { |
| /* |
| * Create a unique name for the slab as a target |
| * for the symlinks. |
| */ |
| name = create_unique_id(s); |
| } |
| |
| s->kobj.kset = slab_kset; |
| err = kobject_init_and_add(&s->kobj, &slab_ktype, NULL, name); |
| if (err) { |
| kobject_put(&s->kobj); |
| return err; |
| } |
| |
| err = sysfs_create_group(&s->kobj, &slab_attr_group); |
| if (err) { |
| kobject_del(&s->kobj); |
| kobject_put(&s->kobj); |
| return err; |
| } |
| kobject_uevent(&s->kobj, KOBJ_ADD); |
| if (!unmergeable) { |
| /* Setup first alias */ |
| sysfs_slab_alias(s, s->name); |
| kfree(name); |
| } |
| return 0; |
| } |
| |
| static void sysfs_slab_remove(struct kmem_cache *s) |
| { |
| kobject_uevent(&s->kobj, KOBJ_REMOVE); |
| kobject_del(&s->kobj); |
| kobject_put(&s->kobj); |
| } |
| |
| /* |
| * Need to buffer aliases during bootup until sysfs becomes |
| * available lest we lose that information. |
| */ |
| struct saved_alias { |
| struct kmem_cache *s; |
| const char *name; |
| struct saved_alias *next; |
| }; |
| |
| static struct saved_alias *alias_list; |
| |
| static int sysfs_slab_alias(struct kmem_cache *s, const char *name) |
| { |
| struct saved_alias *al; |
| |
| if (slab_state == SYSFS) { |
| /* |
| * If we have a leftover link then remove it. |
| */ |
| sysfs_remove_link(&slab_kset->kobj, name); |
| return sysfs_create_link(&slab_kset->kobj, &s->kobj, name); |
| } |
| |
| al = kmalloc(sizeof(struct saved_alias), GFP_KERNEL); |
| if (!al) |
| return -ENOMEM; |
| |
| al->s = s; |
| al->name = name; |
| al->next = alias_list; |
| alias_list = al; |
| return 0; |
| } |
| |
| static int __init slab_sysfs_init(void) |
| { |
| struct kmem_cache *s; |
| int err; |
| |
| slab_kset = kset_create_and_add("slab", &slab_uevent_ops, kernel_kobj); |
| if (!slab_kset) { |
| printk(KERN_ERR "Cannot register slab subsystem.\n"); |
| return -ENOSYS; |
| } |
| |
| slab_state = SYSFS; |
| |
| list_for_each_entry(s, &slab_caches, list) { |
| err = sysfs_slab_add(s); |
| if (err) |
| printk(KERN_ERR "SLUB: Unable to add boot slab %s" |
| " to sysfs\n", s->name); |
| } |
| |
| while (alias_list) { |
| struct saved_alias *al = alias_list; |
| |
| alias_list = alias_list->next; |
| err = sysfs_slab_alias(al->s, al->name); |
| if (err) |
| printk(KERN_ERR "SLUB: Unable to add boot slab alias" |
| " %s to sysfs\n", s->name); |
| kfree(al); |
| } |
| |
| resiliency_test(); |
| return 0; |
| } |
| |
| __initcall(slab_sysfs_init); |
| #endif |
| |
| /* |
| * The /proc/slabinfo ABI |
| */ |
| #ifdef CONFIG_SLABINFO |
| static void print_slabinfo_header(struct seq_file *m) |
| { |
| seq_puts(m, "slabinfo - version: 2.1\n"); |
| seq_puts(m, "# name <active_objs> <num_objs> <objsize> " |
| "<objperslab> <pagesperslab>"); |
| seq_puts(m, " : tunables <limit> <batchcount> <sharedfactor>"); |
| seq_puts(m, " : slabdata <active_slabs> <num_slabs> <sharedavail>"); |
| seq_putc(m, '\n'); |
| } |
| |
| static void *s_start(struct seq_file *m, loff_t *pos) |
| { |
| loff_t n = *pos; |
| |
| down_read(&slub_lock); |
| if (!n) |
| print_slabinfo_header(m); |
| |
| return seq_list_start(&slab_caches, *pos); |
| } |
| |
| static void *s_next(struct seq_file *m, void *p, loff_t *pos) |
| { |
| return seq_list_next(p, &slab_caches, pos); |
| } |
| |
| static void s_stop(struct seq_file *m, void *p) |
| { |
| up_read(&slub_lock); |
| } |
| |
| static int s_show(struct seq_file *m, void *p) |
| { |
| unsigned long nr_partials = 0; |
| unsigned long nr_slabs = 0; |
| unsigned long nr_inuse = 0; |
| unsigned long nr_objs = 0; |
| unsigned long nr_free = 0; |
| struct kmem_cache *s; |
| int node; |
| |
| s = list_entry(p, struct kmem_cache, list); |
| |
| for_each_online_node(node) { |
| struct kmem_cache_node *n = get_node(s, node); |
| |
| if (!n) |
| continue; |
| |
| nr_partials += n->nr_partial; |
| nr_slabs += atomic_long_read(&n->nr_slabs); |
| nr_objs += atomic_long_read(&n->total_objects); |
| nr_free += count_partial(n, count_free); |
| } |
| |
| nr_inuse = nr_objs - nr_free; |
| |
| seq_printf(m, "%-17s %6lu %6lu %6u %4u %4d", s->name, nr_inuse, |
| nr_objs, s->size, oo_objects(s->oo), |
| (1 << oo_order(s->oo))); |
| seq_printf(m, " : tunables %4u %4u %4u", 0, 0, 0); |
| seq_printf(m, " : slabdata %6lu %6lu %6lu", nr_slabs, nr_slabs, |
| 0UL); |
| seq_putc(m, '\n'); |
| return 0; |
| } |
| |
| static const struct seq_operations slabinfo_op = { |
| .start = s_start, |
| .next = s_next, |
| .stop = s_stop, |
| .show = s_show, |
| }; |
| |
| static int slabinfo_open(struct inode *inode, struct file *file) |
| { |
| return seq_open(file, &slabinfo_op); |
| } |
| |
| static const struct file_operations proc_slabinfo_operations = { |
| .open = slabinfo_open, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = seq_release, |
| }; |
| |
| static int __init slab_proc_init(void) |
| { |
| proc_create("slabinfo", S_IRUGO, NULL, &proc_slabinfo_operations); |
| return 0; |
| } |
| module_init(slab_proc_init); |
| #endif /* CONFIG_SLABINFO */ |