ide: WIN_* -> ATA_CMD_*
* Use ATA_CMD_* defines instead of WIN_* ones.
While at it:
* EXABYTE_ENABLE_NEXT -> ATA_EXABYTE_ENABLE_NEST
* SETFEATURES_{EN,DIS}_WCACHE -> SETFEATURES_WC_{ON,OFF}
* SETFEATURES_{EN,DIS}_AAM -> SETFEATURES_AAM_{ON,OFF}
* SMART_* -> ATA_SMART_*
* Remove stale comment from ide-proc.c.
Partially based on earlier work by Chris Wedgwood.
Acked-by: Chris Wedgwood <cw@f00f.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 2f105f4..4829daa 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -132,10 +132,10 @@
ide_fix_driveid(id);
/*
- * WIN_IDENTIFY returns little-endian info,
- * WIN_PIDENTIFY *usually* returns little-endian info.
+ * ATA_CMD_ID_ATA returns little-endian info,
+ * ATA_CMD_ID_ATAPI *usually* returns little-endian info.
*/
- if (cmd == WIN_PIDENTIFY) {
+ if (cmd == ATA_CMD_ID_ATAPI) {
if ((m[0] == 'N' && m[1] == 'E') || /* NEC */
(m[0] == 'F' && m[1] == 'X') || /* Mitsumi */
(m[0] == 'P' && m[1] == 'i')) /* Pioneer */
@@ -161,7 +161,7 @@
/*
* Check for an ATAPI device
*/
- if (cmd == WIN_PIDENTIFY) {
+ if (cmd == ATA_CMD_ID_ATAPI) {
u8 type = (id[ATA_ID_CONFIG] >> 8) & 0x1f;
printk(KERN_CONT "ATAPI ");
@@ -277,7 +277,7 @@
/* set features register for atapi
* identify command to be sure of reply
*/
- if (cmd == WIN_PIDENTIFY) {
+ if (cmd == ATA_CMD_ID_ATAPI) {
ide_task_t task;
memset(&task, 0, sizeof(task));
@@ -290,7 +290,7 @@
/* ask drive for ID */
tp_ops->exec_command(hwif, cmd);
- timeout = ((cmd == WIN_IDENTIFY) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
+ timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
timeout += jiffies;
do {
if (time_after(jiffies, timeout)) {
@@ -440,13 +440,13 @@
if (drive->present) {
/* avoid waiting for inappropriate probes */
- if ((drive->media != ide_disk) && (cmd == WIN_IDENTIFY))
+ if (drive->media != ide_disk && cmd == ATA_CMD_ID_ATA)
return 4;
}
#ifdef DEBUG
printk(KERN_INFO "probing for %s: present=%d, media=%d, probetype=%s\n",
drive->name, drive->present, drive->media,
- (cmd == WIN_IDENTIFY) ? "ATA" : "ATAPI");
+ (cmd == ATA_CMD_ID_ATA) ? "ATA" : "ATAPI");
#endif
/* needed for some systems
@@ -470,7 +470,7 @@
stat = tp_ops->read_status(hwif);
if (OK_STAT(stat, READY_STAT, BUSY_STAT) ||
- drive->present || cmd == WIN_PIDENTIFY) {
+ drive->present || cmd == ATA_CMD_ID_ATAPI) {
/* send cmd and wait */
if ((rc = try_to_identify(drive, cmd))) {
/* failed: try again */
@@ -482,13 +482,13 @@
if (stat == (BUSY_STAT | READY_STAT))
return 4;
- if (rc == 1 && cmd == WIN_PIDENTIFY) {
+ if (rc == 1 && cmd == ATA_CMD_ID_ATAPI) {
printk(KERN_ERR "%s: no response (status = 0x%02x), "
"resetting drive\n", drive->name, stat);
msleep(50);
SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, WIN_SRST);
+ tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
(void)ide_busy_sleep(hwif);
rc = try_to_identify(drive, cmd);
}
@@ -527,7 +527,7 @@
SELECT_DRIVE(drive);
msleep(50);
- tp_ops->exec_command(hwif, EXABYTE_ENABLE_NEST);
+ tp_ops->exec_command(hwif, ATA_EXABYTE_ENABLE_NEST);
if (ide_busy_sleep(hwif)) {
printk(KERN_CONT "failed (timeout)\n");
@@ -544,10 +544,9 @@
printk(KERN_CONT "success\n");
/* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
+ if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
+ (void)do_probe(drive, ATA_CMD_ID_ATAPI);
}
/**
@@ -590,10 +589,9 @@
if (!drive->noprobe)
{
/* if !(success||timed-out) */
- if (do_probe(drive, WIN_IDENTIFY) >= 2) {
+ if (do_probe(drive, ATA_CMD_ID_ATA) >= 2)
/* look for ATAPI device */
- (void) do_probe(drive, WIN_PIDENTIFY);
- }
+ (void)do_probe(drive, ATA_CMD_ID_ATAPI);
if (!drive->present)
/* drive not found */
return 0;