| /* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #ifndef _SDE_HW_CATALOG_H |
| #define _SDE_HW_CATALOG_H |
| |
| #include <linux/kernel.h> |
| #include <linux/bug.h> |
| #include <linux/bitmap.h> |
| #include <linux/err.h> |
| #include <linux/msm-bus.h> |
| #include <drm/drmP.h> |
| |
| /** |
| * Max hardware block count: For ex: max 12 SSPP pipes or |
| * 5 ctl paths. In all cases, it can have max 12 hardware blocks |
| * based on current design |
| */ |
| #define MAX_BLOCKS 12 |
| |
| #define SDE_HW_VER(MAJOR, MINOR, STEP) (((MAJOR & 0xF) << 28) |\ |
| ((MINOR & 0xFFF) << 16) |\ |
| (STEP & 0xFFFF)) |
| |
| #define SDE_HW_MAJOR(rev) ((rev) >> 28) |
| #define SDE_HW_MINOR(rev) (((rev) >> 16) & 0xFFF) |
| #define SDE_HW_STEP(rev) ((rev) & 0xFFFF) |
| #define SDE_HW_MAJOR_MINOR(rev) ((rev) >> 16) |
| |
| #define IS_SDE_MAJOR_MINOR_SAME(rev1, rev2) \ |
| (SDE_HW_MAJOR_MINOR((rev1)) == SDE_HW_MAJOR_MINOR((rev2))) |
| |
| #define SDE_HW_VER_170 SDE_HW_VER(1, 7, 0) /* 8996 v1.0 */ |
| #define SDE_HW_VER_171 SDE_HW_VER(1, 7, 1) /* 8996 v2.0 */ |
| #define SDE_HW_VER_172 SDE_HW_VER(1, 7, 2) /* 8996 v3.0 */ |
| #define SDE_HW_VER_300 SDE_HW_VER(3, 0, 0) /* 8998 v1.0 */ |
| #define SDE_HW_VER_301 SDE_HW_VER(3, 0, 1) /* 8998 v1.1 */ |
| #define SDE_HW_VER_400 SDE_HW_VER(4, 0, 0) /* sdm845 v1.0 */ |
| #define SDE_HW_VER_401 SDE_HW_VER(4, 0, 1) /* sdm845 v2.0 */ |
| #define SDE_HW_VER_410 SDE_HW_VER(4, 1, 0) /* sdm670 v1.0 */ |
| |
| #define IS_MSM8996_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_170) |
| #define IS_MSM8998_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_300) |
| #define IS_SDM845_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_400) |
| #define IS_SDM670_TARGET(rev) IS_SDE_MAJOR_MINOR_SAME((rev), SDE_HW_VER_410) |
| |
| #define SDE_HW_BLK_NAME_LEN 16 |
| |
| #define MAX_IMG_WIDTH 0x3fff |
| #define MAX_IMG_HEIGHT 0x3fff |
| |
| #define CRTC_DUAL_MIXERS 2 |
| |
| #define SDE_COLOR_PROCESS_VER(MAJOR, MINOR) \ |
| ((((MAJOR) & 0xFFFF) << 16) | (((MINOR) & 0xFFFF))) |
| #define SDE_COLOR_PROCESS_MAJOR(version) (((version) & 0xFFFF0000) >> 16) |
| #define SDE_COLOR_PROCESS_MINOR(version) ((version) & 0xFFFF) |
| |
| #define MAX_XIN_COUNT 16 |
| |
| /** |
| * Supported UBWC feature versions |
| */ |
| enum { |
| SDE_HW_UBWC_VER_10 = 0x100, |
| SDE_HW_UBWC_VER_20 = 0x200, |
| SDE_HW_UBWC_VER_30 = 0x300, |
| }; |
| |
| #define IS_UBWC_20_SUPPORTED(rev) ((rev) >= SDE_HW_UBWC_VER_20) |
| |
| /** |
| * MDP TOP BLOCK features |
| * @SDE_MDP_PANIC_PER_PIPE Panic configuration needs to be be done per pipe |
| * @SDE_MDP_10BIT_SUPPORT, Chipset supports 10 bit pixel formats |
| * @SDE_MDP_BWC, MDSS HW supports Bandwidth compression. |
| * @SDE_MDP_UBWC_1_0, This chipsets supports Universal Bandwidth |
| * compression initial revision |
| * @SDE_MDP_UBWC_1_5, Universal Bandwidth compression version 1.5 |
| * @SDE_MDP_MAX Maximum value |
| |
| */ |
| enum { |
| SDE_MDP_PANIC_PER_PIPE = 0x1, |
| SDE_MDP_10BIT_SUPPORT, |
| SDE_MDP_BWC, |
| SDE_MDP_UBWC_1_0, |
| SDE_MDP_UBWC_1_5, |
| SDE_MDP_MAX |
| }; |
| |
| /** |
| * SSPP sub-blocks/features |
| * @SDE_SSPP_SRC Src and fetch part of the pipes, |
| * @SDE_SSPP_SCALER_QSEED2, QSEED2 algorithm support |
| * @SDE_SSPP_SCALER_QSEED3, QSEED3 alogorithm support |
| * @SDE_SSPP_SCALER_RGB, RGB Scaler, supported by RGB pipes |
| * @SDE_SSPP_CSC, Support of Color space converion |
| * @SDE_SSPP_CSC_10BIT, Support of 10-bit Color space conversion |
| * @SDE_SSPP_HSIC, Global HSIC control |
| * @SDE_SSPP_MEMCOLOR Memory Color Support |
| * @SDE_SSPP_IGC, Inverse gamma correction |
| * @SDE_SSPP_PCC, Color correction support |
| * @SDE_SSPP_CURSOR, SSPP can be used as a cursor layer |
| * @SDE_SSPP_QOS, SSPP support QoS control, danger/safe/creq |
| * @SDE_SSPP_QOS_8LVL, SSPP support 8-level QoS control |
| * @SDE_SSPP_EXCL_RECT, SSPP supports exclusion rect |
| * @SDE_SSPP_SMART_DMA_V1, SmartDMA 1.0 support |
| * @SDE_SSPP_SMART_DMA_V2, SmartDMA 2.0 support |
| * @SDE_SSPP_SBUF, SSPP support inline stream buffer |
| * @SDE_SSPP_TS_PREFILL Supports prefill with traffic shaper |
| * @SDE_SSPP_TS_PREFILL_REC1 Supports prefill with traffic shaper multirec |
| * @SDE_SSPP_CDP Supports client driven prefetch |
| * @SDE_SSPP_MAX maximum value |
| */ |
| enum { |
| SDE_SSPP_SRC = 0x1, |
| SDE_SSPP_SCALER_QSEED2, |
| SDE_SSPP_SCALER_QSEED3, |
| SDE_SSPP_SCALER_RGB, |
| SDE_SSPP_CSC, |
| SDE_SSPP_CSC_10BIT, |
| SDE_SSPP_HSIC, |
| SDE_SSPP_MEMCOLOR, |
| SDE_SSPP_IGC, |
| SDE_SSPP_PCC, |
| SDE_SSPP_CURSOR, |
| SDE_SSPP_QOS, |
| SDE_SSPP_QOS_8LVL, |
| SDE_SSPP_EXCL_RECT, |
| SDE_SSPP_SMART_DMA_V1, |
| SDE_SSPP_SMART_DMA_V2, |
| SDE_SSPP_SBUF, |
| SDE_SSPP_TS_PREFILL, |
| SDE_SSPP_TS_PREFILL_REC1, |
| SDE_SSPP_CDP, |
| SDE_SSPP_MAX |
| }; |
| |
| /* |
| * MIXER sub-blocks/features |
| * @SDE_MIXER_LAYER Layer mixer layer blend configuration, |
| * @SDE_MIXER_SOURCESPLIT Layer mixer supports source-split configuration |
| * @SDE_MIXER_GC Gamma correction block |
| * @SDE_DIM_LAYER Layer mixer supports dim layer |
| * @SDE_MIXER_MAX maximum value |
| */ |
| enum { |
| SDE_MIXER_LAYER = 0x1, |
| SDE_MIXER_SOURCESPLIT, |
| SDE_MIXER_GC, |
| SDE_DIM_LAYER, |
| SDE_MIXER_MAX |
| }; |
| |
| /** |
| * DSPP sub-blocks |
| * @SDE_DSPP_IGC DSPP Inverse gamma correction block |
| * @SDE_DSPP_PCC Panel color correction block |
| * @SDE_DSPP_GC Gamma correction block |
| * @SDE_DSPP_HSIC Global HSIC block |
| * @SDE_DSPP_MEMCOLOR Memory Color block |
| * @SDE_DSPP_SIXZONE Six zone block |
| * @SDE_DSPP_GAMUT Gamut bloc |
| * @SDE_DSPP_DITHER Dither block |
| * @SDE_DSPP_HIST Histogram block |
| * @SDE_DSPP_VLUT PA VLUT block |
| * @SDE_DSPP_AD AD block |
| * @SDE_DSPP_MAX maximum value |
| */ |
| enum { |
| SDE_DSPP_IGC = 0x1, |
| SDE_DSPP_PCC, |
| SDE_DSPP_GC, |
| SDE_DSPP_HSIC, |
| SDE_DSPP_MEMCOLOR, |
| SDE_DSPP_SIXZONE, |
| SDE_DSPP_GAMUT, |
| SDE_DSPP_DITHER, |
| SDE_DSPP_HIST, |
| SDE_DSPP_VLUT, |
| SDE_DSPP_AD, |
| SDE_DSPP_MAX |
| }; |
| |
| /** |
| * PINGPONG sub-blocks |
| * @SDE_PINGPONG_TE Tear check block |
| * @SDE_PINGPONG_TE2 Additional tear check block for split pipes |
| * @SDE_PINGPONG_SPLIT PP block supports split fifo |
| * @SDE_PINGPONG_SLAVE PP block is a suitable slave for split fifo |
| * @SDE_PINGPONG_DSC, Display stream compression blocks |
| * @SDE_PINGPONG_DITHER, Dither blocks |
| * @SDE_PINGPONG_MAX |
| */ |
| enum { |
| SDE_PINGPONG_TE = 0x1, |
| SDE_PINGPONG_TE2, |
| SDE_PINGPONG_SPLIT, |
| SDE_PINGPONG_SLAVE, |
| SDE_PINGPONG_DSC, |
| SDE_PINGPONG_DITHER, |
| SDE_PINGPONG_MAX |
| }; |
| |
| /** |
| * CTL sub-blocks |
| * @SDE_CTL_SPLIT_DISPLAY CTL supports video mode split display |
| * @SDE_CTL_PINGPONG_SPLIT CTL supports pingpong split |
| * @SDE_CTL_SBUF CTL supports inline stream buffer |
| * @SDE_CTL_MAX |
| */ |
| enum { |
| SDE_CTL_SPLIT_DISPLAY = 0x1, |
| SDE_CTL_PINGPONG_SPLIT, |
| SDE_CTL_SBUF, |
| SDE_CTL_MAX |
| }; |
| |
| /** |
| * INTF sub-blocks |
| * @SDE_INTF_ROT_START INTF supports rotator start trigger |
| * @SDE_INTF_MAX |
| */ |
| enum { |
| SDE_INTF_ROT_START = 0x1, |
| SDE_INTF_MAX |
| }; |
| |
| /** |
| * WB sub-blocks and features |
| * @SDE_WB_LINE_MODE Writeback module supports line/linear mode |
| * @SDE_WB_BLOCK_MODE Writeback module supports block mode read |
| * @SDE_WB_ROTATE rotation support,this is available if writeback |
| * supports block mode read |
| * @SDE_WB_CSC Writeback color conversion block support |
| * @SDE_WB_CHROMA_DOWN, Writeback chroma down block, |
| * @SDE_WB_DOWNSCALE, Writeback integer downscaler, |
| * @SDE_WB_DITHER, Dither block |
| * @SDE_WB_TRAFFIC_SHAPER, Writeback traffic shaper bloc |
| * @SDE_WB_UBWC, Writeback Universal bandwidth compression |
| * @SDE_WB_YUV_CONFIG Writeback supports output of YUV colorspace |
| * @SDE_WB_PIPE_ALPHA Writeback supports pipe alpha |
| * @SDE_WB_XY_ROI_OFFSET Writeback supports x/y-offset of out ROI in |
| * the destination image |
| * @SDE_WB_QOS, Writeback supports QoS control, danger/safe/creq |
| * @SDE_WB_QOS_8LVL, Writeback supports 8-level QoS control |
| * @SDE_WB_CDP Writeback supports client driven prefetch |
| * @SDE_WB_MAX maximum value |
| */ |
| enum { |
| SDE_WB_LINE_MODE = 0x1, |
| SDE_WB_BLOCK_MODE, |
| SDE_WB_ROTATE = SDE_WB_BLOCK_MODE, |
| SDE_WB_CSC, |
| SDE_WB_CHROMA_DOWN, |
| SDE_WB_DOWNSCALE, |
| SDE_WB_DITHER, |
| SDE_WB_TRAFFIC_SHAPER, |
| SDE_WB_UBWC, |
| SDE_WB_YUV_CONFIG, |
| SDE_WB_PIPE_ALPHA, |
| SDE_WB_XY_ROI_OFFSET, |
| SDE_WB_QOS, |
| SDE_WB_QOS_8LVL, |
| SDE_WB_CDP, |
| SDE_WB_MAX |
| }; |
| |
| /** |
| * VBIF sub-blocks and features |
| * @SDE_VBIF_QOS_OTLIM VBIF supports OT Limit |
| * @SDE_VBIF_QOS_REMAP VBIF supports QoS priority remap |
| * @SDE_VBIF_MAX maximum value |
| */ |
| enum { |
| SDE_VBIF_QOS_OTLIM = 0x1, |
| SDE_VBIF_QOS_REMAP, |
| SDE_VBIF_MAX |
| }; |
| |
| /** |
| * MACRO SDE_HW_BLK_INFO - information of HW blocks inside SDE |
| * @name: string name for debug purposes |
| * @id: enum identifying this block |
| * @base: register base offset to mdss |
| * @len: length of hardware block |
| * @features bit mask identifying sub-blocks/features |
| */ |
| #define SDE_HW_BLK_INFO \ |
| char name[SDE_HW_BLK_NAME_LEN]; \ |
| u32 id; \ |
| u32 base; \ |
| u32 len; \ |
| unsigned long features; \ |
| |
| /** |
| * MACRO SDE_HW_SUBBLK_INFO - information of HW sub-block inside SDE |
| * @name: string name for debug purposes |
| * @id: enum identifying this sub-block |
| * @base: offset of this sub-block relative to the block |
| * offset |
| * @len register block length of this sub-block |
| */ |
| #define SDE_HW_SUBBLK_INFO \ |
| char name[SDE_HW_BLK_NAME_LEN]; \ |
| u32 id; \ |
| u32 base; \ |
| u32 len |
| |
| /** |
| * struct sde_src_blk: SSPP part of the source pipes |
| * @info: HW register and features supported by this sub-blk |
| */ |
| struct sde_src_blk { |
| SDE_HW_SUBBLK_INFO; |
| }; |
| |
| /** |
| * struct sde_scaler_blk: Scaler information |
| * @info: HW register and features supported by this sub-blk |
| * @version: qseed block revision |
| */ |
| struct sde_scaler_blk { |
| SDE_HW_SUBBLK_INFO; |
| u32 version; |
| }; |
| |
| struct sde_csc_blk { |
| SDE_HW_SUBBLK_INFO; |
| }; |
| |
| /** |
| * struct sde_pp_blk : Pixel processing sub-blk information |
| * @info: HW register and features supported by this sub-blk |
| * @version: HW Algorithm version |
| */ |
| struct sde_pp_blk { |
| SDE_HW_SUBBLK_INFO; |
| u32 version; |
| }; |
| |
| /** |
| * struct sde_format_extended - define sde specific pixel format+modifier |
| * @fourcc_format: Base FOURCC pixel format code |
| * @modifier: 64-bit drm format modifier, same modifier must be applied to all |
| * framebuffer planes |
| */ |
| struct sde_format_extended { |
| uint32_t fourcc_format; |
| uint64_t modifier; |
| }; |
| |
| /** |
| * enum sde_qos_lut_usage - define QoS LUT use cases |
| */ |
| enum sde_qos_lut_usage { |
| SDE_QOS_LUT_USAGE_LINEAR, |
| SDE_QOS_LUT_USAGE_MACROTILE, |
| SDE_QOS_LUT_USAGE_NRT, |
| SDE_QOS_LUT_USAGE_CWB, |
| SDE_QOS_LUT_USAGE_MAX, |
| }; |
| |
| /** |
| * struct sde_qos_lut_entry - define QoS LUT table entry |
| * @fl: fill level, or zero on last entry to indicate default lut |
| * @lut: lut to use if equal to or less than fill level |
| */ |
| struct sde_qos_lut_entry { |
| u32 fl; |
| u64 lut; |
| }; |
| |
| /** |
| * struct sde_qos_lut_tbl - define QoS LUT table |
| * @nentry: number of entry in this table |
| * @entries: Pointer to table entries |
| */ |
| struct sde_qos_lut_tbl { |
| u32 nentry; |
| struct sde_qos_lut_entry *entries; |
| }; |
| |
| /** |
| * struct sde_sspp_sub_blks : SSPP sub-blocks |
| * @maxdwnscale: max downscale ratio supported(without DECIMATION) |
| * @maxupscale: maxupscale ratio supported |
| * @maxwidth: max pixelwidth supported by this pipe |
| * @creq_vblank: creq priority during vertical blanking |
| * @danger_vblank: danger priority during vertical blanking |
| * @pixel_ram_size: size of latency hiding and de-tiling buffer in bytes |
| * @smart_dma_priority: hw priority of rect1 of multirect pipe |
| * @max_per_pipe_bw: maximum allowable bandwidth of this pipe in kBps |
| * @src_blk: |
| * @scaler_blk: |
| * @csc_blk: |
| * @hsic: |
| * @memcolor: |
| * @pcc_blk: |
| * @igc_blk: |
| * @format_list: Pointer to list of supported formats |
| * @virt_format_list: Pointer to list of supported formats for virtual planes |
| */ |
| struct sde_sspp_sub_blks { |
| u32 maxlinewidth; |
| u32 creq_vblank; |
| u32 danger_vblank; |
| u32 pixel_ram_size; |
| u32 maxdwnscale; |
| u32 maxupscale; |
| u32 maxhdeciexp; /* max decimation is 2^value */ |
| u32 maxvdeciexp; /* max decimation is 2^value */ |
| u32 smart_dma_priority; |
| u32 max_per_pipe_bw; |
| struct sde_src_blk src_blk; |
| struct sde_scaler_blk scaler_blk; |
| struct sde_pp_blk csc_blk; |
| struct sde_pp_blk hsic_blk; |
| struct sde_pp_blk memcolor_blk; |
| struct sde_pp_blk pcc_blk; |
| struct sde_pp_blk igc_blk; |
| |
| const struct sde_format_extended *format_list; |
| const struct sde_format_extended *virt_format_list; |
| }; |
| |
| /** |
| * struct sde_lm_sub_blks: information of mixer block |
| * @maxwidth: Max pixel width supported by this mixer |
| * @maxblendstages: Max number of blend-stages supported |
| * @blendstage_base: Blend-stage register base offset |
| * @gc: gamma correction block |
| */ |
| struct sde_lm_sub_blks { |
| u32 maxwidth; |
| u32 maxblendstages; |
| u32 blendstage_base[MAX_BLOCKS]; |
| struct sde_pp_blk gc; |
| }; |
| |
| struct sde_dspp_sub_blks { |
| struct sde_pp_blk igc; |
| struct sde_pp_blk pcc; |
| struct sde_pp_blk gc; |
| struct sde_pp_blk hsic; |
| struct sde_pp_blk memcolor; |
| struct sde_pp_blk sixzone; |
| struct sde_pp_blk gamut; |
| struct sde_pp_blk dither; |
| struct sde_pp_blk hist; |
| struct sde_pp_blk ad; |
| struct sde_pp_blk vlut; |
| }; |
| |
| struct sde_pingpong_sub_blks { |
| struct sde_pp_blk te; |
| struct sde_pp_blk te2; |
| struct sde_pp_blk dsc; |
| struct sde_pp_blk dither; |
| }; |
| |
| struct sde_wb_sub_blocks { |
| u32 maxlinewidth; |
| }; |
| |
| struct sde_mdss_base_cfg { |
| SDE_HW_BLK_INFO; |
| }; |
| |
| /** |
| * sde_clk_ctrl_type - Defines top level clock control signals |
| */ |
| enum sde_clk_ctrl_type { |
| SDE_CLK_CTRL_NONE, |
| SDE_CLK_CTRL_VIG0, |
| SDE_CLK_CTRL_VIG1, |
| SDE_CLK_CTRL_VIG2, |
| SDE_CLK_CTRL_VIG3, |
| SDE_CLK_CTRL_VIG4, |
| SDE_CLK_CTRL_RGB0, |
| SDE_CLK_CTRL_RGB1, |
| SDE_CLK_CTRL_RGB2, |
| SDE_CLK_CTRL_RGB3, |
| SDE_CLK_CTRL_DMA0, |
| SDE_CLK_CTRL_DMA1, |
| SDE_CLK_CTRL_CURSOR0, |
| SDE_CLK_CTRL_CURSOR1, |
| SDE_CLK_CTRL_WB0, |
| SDE_CLK_CTRL_WB1, |
| SDE_CLK_CTRL_WB2, |
| SDE_CLK_CTRL_INLINE_ROT0_SSPP, |
| SDE_CLK_CTRL_INLINE_ROT0_WB, |
| SDE_CLK_CTRL_MAX, |
| }; |
| |
| /* struct sde_clk_ctrl_reg : Clock control register |
| * @reg_off: register offset |
| * @bit_off: bit offset |
| */ |
| struct sde_clk_ctrl_reg { |
| u32 reg_off; |
| u32 bit_off; |
| }; |
| |
| /* struct sde_mdp_cfg : MDP TOP-BLK instance info |
| * @id: index identifying this block |
| * @base: register base offset to mdss |
| * @features bit mask identifying sub-blocks/features |
| * @highest_bank_bit: UBWC parameter |
| * @ubwc_static: ubwc static configuration |
| * @ubwc_swizzle: ubwc default swizzle setting |
| * @has_dest_scaler: indicates support of destination scaler |
| * @clk_ctrls clock control register definition |
| */ |
| struct sde_mdp_cfg { |
| SDE_HW_BLK_INFO; |
| u32 highest_bank_bit; |
| u32 ubwc_static; |
| u32 ubwc_swizzle; |
| bool has_dest_scaler; |
| struct sde_clk_ctrl_reg clk_ctrls[SDE_CLK_CTRL_MAX]; |
| }; |
| |
| /* struct sde_mdp_cfg : MDP TOP-BLK instance info |
| * @id: index identifying this block |
| * @base: register base offset to mdss |
| * @features bit mask identifying sub-blocks/features |
| */ |
| struct sde_ctl_cfg { |
| SDE_HW_BLK_INFO; |
| }; |
| |
| /** |
| * struct sde_sspp_cfg - information of source pipes |
| * @id: index identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @sblk: SSPP sub-blocks information |
| * @xin_id: bus client identifier |
| * @clk_ctrl clock control identifier |
| * @type sspp type identifier |
| */ |
| struct sde_sspp_cfg { |
| SDE_HW_BLK_INFO; |
| const struct sde_sspp_sub_blks *sblk; |
| u32 xin_id; |
| enum sde_clk_ctrl_type clk_ctrl; |
| u32 type; |
| }; |
| |
| /** |
| * struct sde_lm_cfg - information of layer mixer blocks |
| * @id: index identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @sblk: LM Sub-blocks information |
| * @dspp: ID of connected DSPP, DSPP_MAX if unsupported |
| * @pingpong: ID of connected PingPong, PINGPONG_MAX if unsupported |
| * @ds: ID of connected DS, DS_MAX if unsupported |
| * @lm_pair_mask: Bitmask of LMs that can be controlled by same CTL |
| */ |
| struct sde_lm_cfg { |
| SDE_HW_BLK_INFO; |
| const struct sde_lm_sub_blks *sblk; |
| u32 dspp; |
| u32 pingpong; |
| u32 ds; |
| unsigned long lm_pair_mask; |
| }; |
| |
| /** |
| * struct sde_dspp_cfg - information of DSPP top block |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * supported by this block |
| */ |
| struct sde_dspp_top_cfg { |
| SDE_HW_BLK_INFO; |
| }; |
| |
| /** |
| * struct sde_dspp_cfg - information of DSPP blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * supported by this block |
| * @sblk sub-blocks information |
| */ |
| struct sde_dspp_cfg { |
| SDE_HW_BLK_INFO; |
| const struct sde_dspp_sub_blks *sblk; |
| }; |
| |
| /** |
| * struct sde_ds_top_cfg - information of dest scaler top |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying features |
| * @version hw version of dest scaler |
| * @maxinputwidth maximum input line width |
| * @maxoutputwidth maximum output line width |
| * @maxupscale maximum upscale ratio |
| */ |
| struct sde_ds_top_cfg { |
| SDE_HW_BLK_INFO; |
| u32 version; |
| u32 maxinputwidth; |
| u32 maxoutputwidth; |
| u32 maxupscale; |
| }; |
| |
| /** |
| * struct sde_ds_cfg - information of dest scaler blocks |
| * @id enum identifying this block |
| * @base register offset wrt DS top offset |
| * @features bit mask identifying features |
| * @version hw version of the qseed block |
| * @top DS top information |
| */ |
| struct sde_ds_cfg { |
| SDE_HW_BLK_INFO; |
| u32 version; |
| const struct sde_ds_top_cfg *top; |
| }; |
| |
| /** |
| * struct sde_pingpong_cfg - information of PING-PONG blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @sblk sub-blocks information |
| */ |
| struct sde_pingpong_cfg { |
| SDE_HW_BLK_INFO; |
| const struct sde_pingpong_sub_blks *sblk; |
| }; |
| |
| /** |
| * struct sde_dsc_cfg - information of DSC blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| */ |
| struct sde_dsc_cfg { |
| SDE_HW_BLK_INFO; |
| }; |
| |
| /** |
| * struct sde_cdm_cfg - information of chroma down blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @intf_connect Bitmask of INTF IDs this CDM can connect to |
| * @wb_connect: Bitmask of Writeback IDs this CDM can connect to |
| */ |
| struct sde_cdm_cfg { |
| SDE_HW_BLK_INFO; |
| unsigned long intf_connect; |
| unsigned long wb_connect; |
| }; |
| |
| /** |
| * struct sde_intf_cfg - information of timing engine blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @type: Interface type(DSI, DP, HDMI) |
| * @controller_id: Controller Instance ID in case of multiple of intf type |
| * @prog_fetch_lines_worst_case Worst case latency num lines needed to prefetch |
| */ |
| struct sde_intf_cfg { |
| SDE_HW_BLK_INFO; |
| u32 type; /* interface type*/ |
| u32 controller_id; |
| u32 prog_fetch_lines_worst_case; |
| }; |
| |
| /** |
| * struct sde_wb_cfg - information of writeback blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @sblk sub-block information |
| * @format_list: Pointer to list of supported formats |
| * @vbif_idx vbif identifier |
| * @xin_id client interface identifier |
| * @clk_ctrl clock control identifier |
| */ |
| struct sde_wb_cfg { |
| SDE_HW_BLK_INFO; |
| const struct sde_wb_sub_blocks *sblk; |
| const struct sde_format_extended *format_list; |
| u32 vbif_idx; |
| u32 xin_id; |
| enum sde_clk_ctrl_type clk_ctrl; |
| }; |
| |
| /** |
| * struct sde_rot_vbif_cfg - inline rotator vbif configs |
| * @xin_id xin client id |
| * @num enum identifying this block |
| * @is_read indicates read/write client |
| * @clk_ctrl index to clk control |
| */ |
| struct sde_rot_vbif_cfg { |
| u32 xin_id; |
| u32 num; |
| bool is_read; |
| enum sde_clk_ctrl_type clk_ctrl; |
| }; |
| |
| /** |
| * struct sde_rot_cfg - information of rotator blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @len length of hardware block |
| * @features bit mask identifying sub-blocks/features |
| * @pdev private device handle |
| * @scid subcache identifier |
| * @slice_size subcache slice size |
| * @vbif_idx vbif identifier |
| * @xin_count number of xin clients |
| * @vbif_cfg vbif settings related to rotator |
| */ |
| struct sde_rot_cfg { |
| SDE_HW_BLK_INFO; |
| void *pdev; |
| int scid; |
| size_t slice_size; |
| u32 vbif_idx; |
| |
| u32 xin_count; |
| struct sde_rot_vbif_cfg vbif_cfg[MAX_BLOCKS]; |
| }; |
| |
| /** |
| * struct sde_vbif_dynamic_ot_cfg - dynamic OT setting |
| * @pps pixel per seconds |
| * @ot_limit OT limit to use up to specified pixel per second |
| */ |
| struct sde_vbif_dynamic_ot_cfg { |
| u64 pps; |
| u32 ot_limit; |
| }; |
| |
| /** |
| * struct sde_vbif_dynamic_ot_tbl - dynamic OT setting table |
| * @count length of cfg |
| * @cfg pointer to array of configuration settings with |
| * ascending requirements |
| */ |
| struct sde_vbif_dynamic_ot_tbl { |
| u32 count; |
| struct sde_vbif_dynamic_ot_cfg *cfg; |
| }; |
| |
| /** |
| * struct sde_vbif_qos_tbl - QoS priority table |
| * @npriority_lvl num of priority level |
| * @priority_lvl pointer to array of priority level in ascending order |
| */ |
| struct sde_vbif_qos_tbl { |
| u32 npriority_lvl; |
| u32 *priority_lvl; |
| }; |
| |
| /** |
| * struct sde_vbif_cfg - information of VBIF blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @ot_rd_limit default OT read limit |
| * @ot_wr_limit default OT write limit |
| * @xin_halt_timeout maximum time (in usec) for xin to halt |
| * @dynamic_ot_rd_tbl dynamic OT read configuration table |
| * @dynamic_ot_wr_tbl dynamic OT write configuration table |
| * @qos_rt_tbl real-time QoS priority table |
| * @qos_nrt_tbl non-real-time QoS priority table |
| * @memtype_count number of defined memtypes |
| * @memtype array of xin memtype definitions |
| */ |
| struct sde_vbif_cfg { |
| SDE_HW_BLK_INFO; |
| u32 default_ot_rd_limit; |
| u32 default_ot_wr_limit; |
| u32 xin_halt_timeout; |
| struct sde_vbif_dynamic_ot_tbl dynamic_ot_rd_tbl; |
| struct sde_vbif_dynamic_ot_tbl dynamic_ot_wr_tbl; |
| struct sde_vbif_qos_tbl qos_rt_tbl; |
| struct sde_vbif_qos_tbl qos_nrt_tbl; |
| u32 memtype_count; |
| u32 memtype[MAX_XIN_COUNT]; |
| }; |
| /** |
| * struct sde_reg_dma_cfg - information of lut dma blocks |
| * @id enum identifying this block |
| * @base register offset of this block |
| * @features bit mask identifying sub-blocks/features |
| * @version version of lutdma hw block |
| * @trigger_sel_off offset to trigger select registers of lutdma |
| */ |
| struct sde_reg_dma_cfg { |
| SDE_HW_BLK_INFO; |
| u32 version; |
| u32 trigger_sel_off; |
| }; |
| |
| /** |
| * Define CDP use cases |
| * @SDE_PERF_CDP_UDAGE_RT: real-time use cases |
| * @SDE_PERF_CDP_USAGE_NRT: non real-time use cases such as WFD |
| */ |
| enum { |
| SDE_PERF_CDP_USAGE_RT, |
| SDE_PERF_CDP_USAGE_NRT, |
| SDE_PERF_CDP_USAGE_MAX |
| }; |
| |
| /** |
| * struct sde_perf_cdp_cfg - define CDP use case configuration |
| * @rd_enable: true if read pipe CDP is enabled |
| * @wr_enable: true if write pipe CDP is enabled |
| */ |
| struct sde_perf_cdp_cfg { |
| bool rd_enable; |
| bool wr_enable; |
| }; |
| |
| /** |
| * struct sde_perf_cfg - performance control settings |
| * @max_bw_low low threshold of maximum bandwidth (kbps) |
| * @max_bw_high high threshold of maximum bandwidth (kbps) |
| * @min_core_ib minimum bandwidth for core (kbps) |
| * @min_core_ib minimum mnoc ib vote in kbps |
| * @min_llcc_ib minimum llcc ib vote in kbps |
| * @min_dram_ib minimum dram ib vote in kbps |
| * @core_ib_ff core instantaneous bandwidth fudge factor |
| * @core_clk_ff core clock fudge factor |
| * @comp_ratio_rt string of 0 or more of <fourcc>/<ven>/<mod>/<comp ratio> |
| * @comp_ratio_nrt string of 0 or more of <fourcc>/<ven>/<mod>/<comp ratio> |
| * @undersized_prefill_lines undersized prefill in lines |
| * @xtra_prefill_lines extra prefill latency in lines |
| * @dest_scale_prefill_lines destination scaler latency in lines |
| * @macrotile_perfill_lines macrotile latency in lines |
| * @yuv_nv12_prefill_lines yuv_nv12 latency in lines |
| * @linear_prefill_lines linear latency in lines |
| * @downscaling_prefill_lines downscaling latency in lines |
| * @amortizable_theshold minimum y position for traffic shaping prefill |
| * @min_prefill_lines minimum pipeline latency in lines |
| * @safe_lut_tbl: LUT tables for safe signals |
| * @danger_lut_tbl: LUT tables for danger signals |
| * @qos_lut_tbl: LUT tables for QoS signals |
| * @cdp_cfg cdp use case configurations |
| */ |
| struct sde_perf_cfg { |
| u32 max_bw_low; |
| u32 max_bw_high; |
| u32 min_core_ib; |
| u32 min_llcc_ib; |
| u32 min_dram_ib; |
| const char *core_ib_ff; |
| const char *core_clk_ff; |
| const char *comp_ratio_rt; |
| const char *comp_ratio_nrt; |
| u32 undersized_prefill_lines; |
| u32 xtra_prefill_lines; |
| u32 dest_scale_prefill_lines; |
| u32 macrotile_prefill_lines; |
| u32 yuv_nv12_prefill_lines; |
| u32 linear_prefill_lines; |
| u32 downscaling_prefill_lines; |
| u32 amortizable_threshold; |
| u32 min_prefill_lines; |
| u32 safe_lut_tbl[SDE_QOS_LUT_USAGE_MAX]; |
| u32 danger_lut_tbl[SDE_QOS_LUT_USAGE_MAX]; |
| struct sde_qos_lut_tbl qos_lut_tbl[SDE_QOS_LUT_USAGE_MAX]; |
| struct sde_perf_cdp_cfg cdp_cfg[SDE_PERF_CDP_USAGE_MAX]; |
| }; |
| |
| /** |
| * struct sde_mdss_cfg - information of MDSS HW |
| * This is the main catalog data structure representing |
| * this HW version. Contains number of instances, |
| * register offsets, capabilities of the all MDSS HW sub-blocks. |
| * |
| * @max_sspp_linewidth max source pipe line width support. |
| * @max_mixer_width max layer mixer line width support. |
| * @max_mixer_blendstages max layer mixer blend stages or |
| * supported z order |
| * @max_wb_linewidth max writeback line width support. |
| * @qseed_type qseed2 or qseed3 support. |
| * @csc_type csc or csc_10bit support. |
| * @smart_dma_rev Supported version of SmartDMA feature. |
| * @has_src_split source split feature status |
| * @has_cdp Client driven prefetch feature status |
| * @has_wb_ubwc UBWC feature supported on WB |
| * @ubwc_version UBWC feature version (0x0 for not supported) |
| * @has_sbuf indicate if stream buffer is available |
| * @sbuf_headroom stream buffer headroom in lines |
| * @has_idle_pc indicate if idle power collapse feature is supported |
| * @dma_formats Supported formats for dma pipe |
| * @cursor_formats Supported formats for cursor pipe |
| * @vig_formats Supported formats for vig pipe |
| * @wb_formats Supported formats for wb |
| * @vbif_qos_nlvl number of vbif QoS priority level |
| * @ts_prefill_rev prefill traffic shaper feature revision |
| */ |
| struct sde_mdss_cfg { |
| u32 hwversion; |
| |
| u32 max_sspp_linewidth; |
| u32 max_mixer_width; |
| u32 max_mixer_blendstages; |
| u32 max_wb_linewidth; |
| u32 qseed_type; |
| u32 csc_type; |
| u32 smart_dma_rev; |
| bool has_src_split; |
| bool has_cdp; |
| bool has_dim_layer; |
| bool has_wb_ubwc; |
| u32 ubwc_version; |
| bool has_sbuf; |
| u32 sbuf_headroom; |
| bool has_idle_pc; |
| u32 vbif_qos_nlvl; |
| u32 ts_prefill_rev; |
| |
| u32 mdss_count; |
| struct sde_mdss_base_cfg mdss[MAX_BLOCKS]; |
| |
| u32 mdp_count; |
| struct sde_mdp_cfg mdp[MAX_BLOCKS]; |
| |
| u32 ctl_count; |
| struct sde_ctl_cfg ctl[MAX_BLOCKS]; |
| |
| u32 sspp_count; |
| struct sde_sspp_cfg sspp[MAX_BLOCKS]; |
| |
| u32 mixer_count; |
| struct sde_lm_cfg mixer[MAX_BLOCKS]; |
| |
| struct sde_dspp_top_cfg dspp_top; |
| |
| u32 dspp_count; |
| struct sde_dspp_cfg dspp[MAX_BLOCKS]; |
| |
| u32 ds_count; |
| struct sde_ds_cfg ds[MAX_BLOCKS]; |
| |
| u32 pingpong_count; |
| struct sde_pingpong_cfg pingpong[MAX_BLOCKS]; |
| |
| u32 dsc_count; |
| struct sde_dsc_cfg dsc[MAX_BLOCKS]; |
| |
| u32 cdm_count; |
| struct sde_cdm_cfg cdm[MAX_BLOCKS]; |
| |
| u32 intf_count; |
| struct sde_intf_cfg intf[MAX_BLOCKS]; |
| |
| u32 wb_count; |
| struct sde_wb_cfg wb[MAX_BLOCKS]; |
| |
| u32 rot_count; |
| struct sde_rot_cfg rot[MAX_BLOCKS]; |
| |
| u32 vbif_count; |
| struct sde_vbif_cfg vbif[MAX_BLOCKS]; |
| |
| u32 reg_dma_count; |
| struct sde_reg_dma_cfg dma_cfg; |
| |
| u32 ad_count; |
| |
| /* Add additional block data structures here */ |
| |
| struct sde_perf_cfg perf; |
| struct sde_format_extended *dma_formats; |
| struct sde_format_extended *cursor_formats; |
| struct sde_format_extended *vig_formats; |
| struct sde_format_extended *wb_formats; |
| }; |
| |
| struct sde_mdss_hw_cfg_handler { |
| u32 major; |
| u32 minor; |
| struct sde_mdss_cfg* (*cfg_init)(u32); |
| }; |
| |
| /* |
| * Access Macros |
| */ |
| #define BLK_MDP(s) ((s)->mdp) |
| #define BLK_CTL(s) ((s)->ctl) |
| #define BLK_VIG(s) ((s)->vig) |
| #define BLK_RGB(s) ((s)->rgb) |
| #define BLK_DMA(s) ((s)->dma) |
| #define BLK_CURSOR(s) ((s)->cursor) |
| #define BLK_MIXER(s) ((s)->mixer) |
| #define BLK_DSPP(s) ((s)->dspp) |
| #define BLK_DS(s) ((s)->ds) |
| #define BLK_PINGPONG(s) ((s)->pingpong) |
| #define BLK_CDM(s) ((s)->cdm) |
| #define BLK_INTF(s) ((s)->intf) |
| #define BLK_WB(s) ((s)->wb) |
| #define BLK_AD(s) ((s)->ad) |
| |
| /** |
| * sde_hw_catalog_init - sde hardware catalog init API parses dtsi property |
| * and stores all parsed offset, hardware capabilities in config structure. |
| * @dev: drm device node. |
| * @hw_rev: caller needs provide the hardware revision before parsing. |
| * |
| * Return: parsed sde config structure |
| */ |
| struct sde_mdss_cfg *sde_hw_catalog_init(struct drm_device *dev, u32 hw_rev); |
| |
| /** |
| * sde_hw_catalog_deinit - sde hardware catalog cleanup |
| * @sde_cfg: pointer returned from init function |
| */ |
| void sde_hw_catalog_deinit(struct sde_mdss_cfg *sde_cfg); |
| |
| /** |
| * sde_hw_sspp_multirect_enabled - check multirect enabled for the sspp |
| * @cfg: pointer to sspp cfg |
| */ |
| static inline bool sde_hw_sspp_multirect_enabled(const struct sde_sspp_cfg *cfg) |
| { |
| return test_bit(SDE_SSPP_SMART_DMA_V1, &cfg->features) || |
| test_bit(SDE_SSPP_SMART_DMA_V2, &cfg->features); |
| } |
| #endif /* _SDE_HW_CATALOG_H */ |