[TG3]: remove sparse warnings

Removed sparse warnings from tg3 driver.  The new logic seems fine (I
don't immediately see where we are running over values for any of the
variables that need to be saved).

This patch compiles fine and I'm currently using a tg3 with the patched
driver to post this patch as a basic proof of concept.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ef1e3d1..cbfa4df 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -4870,7 +4870,6 @@
 	pci_write_config_dword(tp->pdev, TG3PCI_X_CAPS, val);
 
 	if (tp->tg3_flags2 & TG3_FLG2_5780_CLASS) {
-		u32 val;
 
 		/* Chip reset on 5780 will reset MSI enable bit,
 		 * so need to restore it.
@@ -5027,7 +5026,7 @@
 	tw32(GRC_MODE, tp->grc_mode);
 
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A0) {
-		u32 val = tr32(0xc4);
+		val = tr32(0xc4);
 
 		tw32(0xc4, val | (1 << 15));
 	}
@@ -5056,7 +5055,7 @@
 
 	if ((tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) &&
 	    tp->pci_chip_rev_id != CHIPREV_ID_5750_A0) {
-		u32 val = tr32(0x7c00);
+		val = tr32(0x7c00);
 
 		tw32(0x7c00, val | (1 << 25));
 	}
@@ -7991,7 +7990,7 @@
 	buf = data;
 	if (b_offset || odd_len) {
 		buf = kmalloc(len, GFP_KERNEL);
-		if (buf == 0)
+		if (!buf)
 			return -ENOMEM;
 		if (b_offset)
 			memcpy(buf, &start, 4);
@@ -8420,7 +8419,7 @@
 static int tg3_test_nvram(struct tg3 *tp)
 {
 	u32 *buf, csum, magic;
-	int i, j, err = 0, size;
+	int i, j, k, err = 0, size;
 
 	if (tg3_nvram_read_swab(tp, 0, &magic) != 0)
 		return -EIO;
@@ -8474,7 +8473,6 @@
 		u8 data[NVRAM_SELFBOOT_DATA_SIZE];
 	       	u8 parity[NVRAM_SELFBOOT_DATA_SIZE];
 		u8 *buf8 = (u8 *) buf;
-		int j, k;
 
 		/* Separate the parity bits and the data bytes.  */
 		for (i = 0, j = 0, k = 0; i < NVRAM_SELFBOOT_HW_SIZE; i++) {
@@ -10730,7 +10728,6 @@
 		 */
 		if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX) {
 			u32 pm_reg;
-			u16 pci_cmd;
 
 			tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
 
@@ -11876,7 +11873,7 @@
 	INIT_WORK(&tp->reset_task, tg3_reset_task);
 
 	tp->regs = ioremap_nocache(tg3reg_base, tg3reg_len);
-	if (tp->regs == 0UL) {
+	if (!tp->regs) {
 		printk(KERN_ERR PFX "Cannot map device registers, "
 		       "aborting.\n");
 		err = -ENOMEM;