V4L/DVB: af9015: add support for TerraTec Cinergy T Stick Dual RC
Add USB ID [0ccd:0099] for TerraTec Cinergy T Stick Dual RC.
Device is based for AF9015 + AF9013 + 2 x MxL5007T chips.
Thanks to the TerraTec!
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/dvb/dvb-usb/af9015.c b/drivers/media/dvb/dvb-usb/af9015.c
index b5fdcc2..bf8075c 100644
--- a/drivers/media/dvb/dvb-usb/af9015.c
+++ b/drivers/media/dvb/dvb-usb/af9015.c
@@ -32,6 +32,7 @@
#include "mxl5005s.h"
#include "mc44s803.h"
#include "tda18218.h"
+#include "mxl5007t.h"
static int dvb_usb_af9015_debug;
module_param_named(debug, dvb_usb_af9015_debug, int, 0644);
@@ -999,6 +1000,7 @@
case AF9013_TUNER_MXL5003D:
case AF9013_TUNER_MXL5005D:
case AF9013_TUNER_MXL5005R:
+ case AF9013_TUNER_MXL5007T:
af9015_af9013_config[i].rf_spec_inv = 0;
break;
case AF9013_TUNER_MC44S803:
@@ -1212,6 +1214,11 @@
.i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
};
+static struct mxl5007t_config af9015_mxl5007t_config = {
+ .xtal_freq_hz = MxL_XTAL_24_MHZ,
+ .if_freq_hz = MxL_IF_4_57_MHZ,
+};
+
static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
{
struct af9015_state *state = adap->dev->priv;
@@ -1263,6 +1270,10 @@
ret = dvb_attach(mc44s803_attach, adap->fe, i2c_adap,
&af9015_mc44s803_config) == NULL ? -ENODEV : 0;
break;
+ case AF9013_TUNER_MXL5007T:
+ ret = dvb_attach(mxl5007t_attach, adap->fe, i2c_adap,
+ 0xc0, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
+ break;
case AF9013_TUNER_UNKNOWN:
default:
ret = -ENODEV;
@@ -1309,6 +1320,8 @@
{USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4)},
{USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M)},
{USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC)},
+ {USB_DEVICE(USB_VID_TERRATEC,
+ USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC)},
{0},
};
MODULE_DEVICE_TABLE(usb, af9015_usb_table);
@@ -1370,7 +1383,7 @@
.i2c_algo = &af9015_i2c_algo,
- .num_device_descs = 10, /* check max from dvb-usb.h */
+ .num_device_descs = 11, /* check max from dvb-usb.h */
.devices = {
{
.name = "Afatech AF9015 DVB-T USB2.0 stick",
@@ -1427,6 +1440,11 @@
.cold_ids = {&af9015_usb_table[33], NULL},
.warm_ids = {NULL},
},
+ {
+ .name = "TerraTec Cinergy T Stick Dual RC",
+ .cold_ids = {&af9015_usb_table[34], NULL},
+ .warm_ids = {NULL},
+ },
}
}, {
.caps = DVB_USB_IS_AN_I2C_ADAPTER,