[SCSI] lpfc 8.3.21: Initialization and user interface changes
- Make link speed not supported by port message an error message.
- Add support for new SLI failure codes add sysfs parameter to reflect the
security setting and current state.
- Add all lpfc module parameters to the /sys/modules/lpfc/parameters directory.
[jejb: fix up compile failure]
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index a57f6c0..e7c020d 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -678,6 +678,7 @@
*
* Notes:
* Assumes any error from lpfc_do_offline() will be negative.
+ * Do not make this function static.
*
* Returns:
* lpfc_do_offline() return code if not zero
@@ -1293,6 +1294,28 @@
}
/**
+ * lpfc_dss_show - Return the current state of dss and the configured state
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the formatted text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_dss_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+
+ return snprintf(buf, PAGE_SIZE, "%s - %sOperational\n",
+ (phba->cfg_enable_dss) ? "Enabled" : "Disabled",
+ (phba->sli3_options & LPFC_SLI3_DSS_ENABLED) ?
+ "" : "Not ");
+}
+
+/**
* lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
@@ -1611,13 +1634,13 @@
#define LPFC_ATTR(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_init(name, defval, minval, maxval)
#define LPFC_ATTR_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1625,7 +1648,7 @@
#define LPFC_ATTR_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1636,7 +1659,7 @@
#define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1644,7 +1667,7 @@
#define LPFC_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_param_hex_show(name)\
lpfc_param_init(name, defval, minval, maxval)\
@@ -1655,13 +1678,13 @@
#define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_init(name, defval, minval, maxval)
#define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1669,7 +1692,7 @@
#define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1680,7 +1703,7 @@
#define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1688,7 +1711,7 @@
#define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
MODULE_PARM_DESC(lpfc_##name, desc);\
lpfc_vport_param_hex_show(name)\
lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1732,7 +1755,7 @@
static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
-
+static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
@@ -1973,7 +1996,7 @@
static int lpfc_poll = 0;
-module_param(lpfc_poll, int, 0);
+module_param(lpfc_poll, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
" 0 - none,"
" 1 - poll with interrupts enabled"
@@ -1983,21 +2006,21 @@
lpfc_poll_show, lpfc_poll_store);
int lpfc_sli_mode = 0;
-module_param(lpfc_sli_mode, int, 0);
+module_param(lpfc_sli_mode, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:"
" 0 - auto (SLI-3 if supported),"
" 2 - select SLI-2 even on SLI-3 capable HBAs,"
" 3 - select SLI-3");
int lpfc_enable_npiv = 1;
-module_param(lpfc_enable_npiv, int, 0);
+module_param(lpfc_enable_npiv, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality");
lpfc_param_show(enable_npiv);
lpfc_param_init(enable_npiv, 1, 0, 1);
static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL);
int lpfc_enable_rrq;
-module_param(lpfc_enable_rrq, int, 0);
+module_param(lpfc_enable_rrq, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality");
lpfc_param_show(enable_rrq);
lpfc_param_init(enable_rrq, 0, 0, 1);
@@ -2059,7 +2082,7 @@
lpfc_txcmplq_hw_show, NULL);
int lpfc_iocb_cnt = 2;
-module_param(lpfc_iocb_cnt, int, 1);
+module_param(lpfc_iocb_cnt, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_iocb_cnt,
"Number of IOCBs alloc for ELS, CT, and ABTS: 1k to 5k IOCBs");
lpfc_param_show(iocb_cnt);
@@ -2211,7 +2234,7 @@
# disappear until the timer expires. Value range is [0,255]. Default
# value is 30.
*/
-module_param(lpfc_devloss_tmo, int, 0);
+module_param(lpfc_devloss_tmo, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_devloss_tmo,
"Seconds driver will hold I/O waiting "
"for a device to come back");
@@ -2321,7 +2344,7 @@
# Default value of this parameter is 1.
*/
static int lpfc_restrict_login = 1;
-module_param(lpfc_restrict_login, int, 0);
+module_param(lpfc_restrict_login, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_restrict_login,
"Restrict virtual ports login to remote initiators.");
lpfc_vport_param_show(restrict_login);
@@ -2492,7 +2515,7 @@
return -EINVAL;
}
static int lpfc_topology = 0;
-module_param(lpfc_topology, int, 0);
+module_param(lpfc_topology, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
@@ -2934,7 +2957,7 @@
}
static int lpfc_link_speed = 0;
-module_param(lpfc_link_speed, int, 0);
+module_param(lpfc_link_speed, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
lpfc_param_show(link_speed)
@@ -3062,7 +3085,7 @@
}
static int lpfc_aer_support = 1;
-module_param(lpfc_aer_support, int, 1);
+module_param(lpfc_aer_support, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
lpfc_param_show(aer_support)
@@ -3174,7 +3197,7 @@
# The value is set in milliseconds.
*/
static int lpfc_max_scsicmpl_time;
-module_param(lpfc_max_scsicmpl_time, int, 0);
+module_param(lpfc_max_scsicmpl_time, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_max_scsicmpl_time,
"Use command completion time to control queue depth");
lpfc_vport_param_show(max_scsicmpl_time);
@@ -3350,7 +3373,7 @@
*/
unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
-module_param(lpfc_prot_mask, uint, 0);
+module_param(lpfc_prot_mask, uint, S_IRUGO);
MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
/*
@@ -3362,7 +3385,7 @@
#
*/
unsigned char lpfc_prot_guard = SHOST_DIX_GUARD_IP;
-module_param(lpfc_prot_guard, byte, 0);
+module_param(lpfc_prot_guard, byte, S_IRUGO);
MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
/*
@@ -3380,7 +3403,7 @@
* Default value is 0.
*/
int lpfc_delay_discovery;
-module_param(lpfc_delay_discovery, int, 0);
+module_param(lpfc_delay_discovery, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_delay_discovery,
"Delay NPort discovery when Clean Address bit is cleared. "
"Allowed values: 0,1.");
@@ -3475,6 +3498,7 @@
&dev_attr_txcmplq_hw,
&dev_attr_lpfc_fips_level,
&dev_attr_lpfc_fips_rev,
+ &dev_attr_lpfc_dss,
NULL,
};
@@ -4677,6 +4701,7 @@
lpfc_aer_support_init(phba, lpfc_aer_support);
lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
+ phba->cfg_enable_dss = 1;
return;
}