| /* |
| * linux/drivers/net/wireless/libertas/if_sdio.c |
| * |
| * Copyright 2007-2008 Pierre Ossman |
| * |
| * Inspired by if_cs.c, Copyright 2007 Holger Schurig |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This hardware has more or less no CMD53 support, so all registers |
| * must be accessed using sdio_readb()/sdio_writeb(). |
| * |
| * Transfers must be in one transaction or the firmware goes bonkers. |
| * This means that the transfer must either be small enough to do a |
| * byte based transfer or it must be padded to a multiple of the |
| * current block size. |
| * |
| * As SDIO is still new to the kernel, it is unfortunately common with |
| * bugs in the host controllers related to that. One such bug is that |
| * controllers cannot do transfers that aren't a multiple of 4 bytes. |
| * If you don't have time to fix the host controller driver, you can |
| * work around the problem by modifying if_sdio_host_to_card() and |
| * if_sdio_card_to_host() to pad the data. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/moduleparam.h> |
| #include <linux/firmware.h> |
| #include <linux/netdevice.h> |
| #include <linux/delay.h> |
| #include <linux/mmc/card.h> |
| #include <linux/mmc/sdio_func.h> |
| #include <linux/mmc/sdio_ids.h> |
| |
| #include "host.h" |
| #include "decl.h" |
| #include "defs.h" |
| #include "dev.h" |
| #include "if_sdio.h" |
| |
| static char *lbs_helper_name = NULL; |
| module_param_named(helper_name, lbs_helper_name, charp, 0644); |
| |
| static char *lbs_fw_name = NULL; |
| module_param_named(fw_name, lbs_fw_name, charp, 0644); |
| |
| static const struct sdio_device_id if_sdio_ids[] = { |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, |
| SDIO_DEVICE_ID_MARVELL_LIBERTAS) }, |
| { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, |
| SDIO_DEVICE_ID_MARVELL_8688WLAN) }, |
| { /* end: all zeroes */ }, |
| }; |
| |
| MODULE_DEVICE_TABLE(sdio, if_sdio_ids); |
| |
| struct if_sdio_model { |
| int model; |
| const char *helper; |
| const char *firmware; |
| }; |
| |
| static struct if_sdio_model if_sdio_models[] = { |
| { |
| /* 8385 */ |
| .model = 0x04, |
| .helper = "sd8385_helper.bin", |
| .firmware = "sd8385.bin", |
| }, |
| { |
| /* 8686 */ |
| .model = 0x0B, |
| .helper = "sd8686_helper.bin", |
| .firmware = "sd8686.bin", |
| }, |
| { |
| /* 8688 */ |
| .model = 0x10, |
| .helper = "sd8688_helper.bin", |
| .firmware = "sd8688.bin", |
| }, |
| }; |
| |
| struct if_sdio_packet { |
| struct if_sdio_packet *next; |
| u16 nb; |
| u8 buffer[0] __attribute__((aligned(4))); |
| }; |
| |
| struct if_sdio_card { |
| struct sdio_func *func; |
| struct lbs_private *priv; |
| |
| int model; |
| unsigned long ioport; |
| |
| const char *helper; |
| const char *firmware; |
| |
| u8 buffer[65536]; |
| |
| spinlock_t lock; |
| struct if_sdio_packet *packets; |
| |
| struct workqueue_struct *workqueue; |
| struct work_struct packet_worker; |
| }; |
| |
| /********************************************************************/ |
| /* I/O */ |
| /********************************************************************/ |
| |
| static u16 if_sdio_read_scratch(struct if_sdio_card *card, int *err) |
| { |
| int ret, reg; |
| u16 scratch; |
| |
| if (card->model == 0x04) |
| reg = IF_SDIO_SCRATCH_OLD; |
| else |
| reg = IF_SDIO_SCRATCH; |
| |
| scratch = sdio_readb(card->func, reg, &ret); |
| if (!ret) |
| scratch |= sdio_readb(card->func, reg + 1, &ret) << 8; |
| |
| if (err) |
| *err = ret; |
| |
| if (ret) |
| return 0xffff; |
| |
| return scratch; |
| } |
| |
| static int if_sdio_handle_cmd(struct if_sdio_card *card, |
| u8 *buffer, unsigned size) |
| { |
| struct lbs_private *priv = card->priv; |
| int ret; |
| unsigned long flags; |
| u8 i; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| if (size > LBS_CMD_BUFFER_SIZE) { |
| lbs_deb_sdio("response packet too large (%d bytes)\n", |
| (int)size); |
| ret = -E2BIG; |
| goto out; |
| } |
| |
| spin_lock_irqsave(&priv->driver_lock, flags); |
| |
| i = (priv->resp_idx == 0) ? 1 : 0; |
| BUG_ON(priv->resp_len[i]); |
| priv->resp_len[i] = size; |
| memcpy(priv->resp_buf[i], buffer, size); |
| lbs_notify_command_response(priv, i); |
| |
| spin_unlock_irqrestore(&card->priv->driver_lock, flags); |
| |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| return ret; |
| } |
| |
| static int if_sdio_handle_data(struct if_sdio_card *card, |
| u8 *buffer, unsigned size) |
| { |
| int ret; |
| struct sk_buff *skb; |
| char *data; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| if (size > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE) { |
| lbs_deb_sdio("response packet too large (%d bytes)\n", |
| (int)size); |
| ret = -E2BIG; |
| goto out; |
| } |
| |
| skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + NET_IP_ALIGN); |
| if (!skb) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| skb_reserve(skb, NET_IP_ALIGN); |
| |
| data = skb_put(skb, size); |
| |
| memcpy(data, buffer, size); |
| |
| lbs_process_rxed_packet(card->priv, skb); |
| |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static int if_sdio_handle_event(struct if_sdio_card *card, |
| u8 *buffer, unsigned size) |
| { |
| int ret; |
| u32 event; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| if (card->model == 0x04) { |
| event = sdio_readb(card->func, IF_SDIO_EVENT, &ret); |
| if (ret) |
| goto out; |
| |
| /* right shift 3 bits to get the event id */ |
| event >>= 3; |
| } else { |
| if (size < 4) { |
| lbs_deb_sdio("event packet too small (%d bytes)\n", |
| (int)size); |
| ret = -EINVAL; |
| goto out; |
| } |
| event = buffer[3] << 24; |
| event |= buffer[2] << 16; |
| event |= buffer[1] << 8; |
| event |= buffer[0] << 0; |
| } |
| |
| lbs_queue_event(card->priv, event & 0xFF); |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static int if_sdio_card_to_host(struct if_sdio_card *card) |
| { |
| int ret; |
| u8 status; |
| u16 size, type, chunk; |
| unsigned long timeout; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| size = if_sdio_read_scratch(card, &ret); |
| if (ret) |
| goto out; |
| |
| if (size < 4) { |
| lbs_deb_sdio("invalid packet size (%d bytes) from firmware\n", |
| (int)size); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| timeout = jiffies + HZ; |
| while (1) { |
| status = sdio_readb(card->func, IF_SDIO_STATUS, &ret); |
| if (ret) |
| goto out; |
| if (status & IF_SDIO_IO_RDY) |
| break; |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| mdelay(1); |
| } |
| |
| /* |
| * The transfer must be in one transaction or the firmware |
| * goes suicidal. There's no way to guarantee that for all |
| * controllers, but we can at least try. |
| */ |
| chunk = sdio_align_size(card->func, size); |
| |
| ret = sdio_readsb(card->func, card->buffer, card->ioport, chunk); |
| if (ret) |
| goto out; |
| |
| chunk = card->buffer[0] | (card->buffer[1] << 8); |
| type = card->buffer[2] | (card->buffer[3] << 8); |
| |
| lbs_deb_sdio("packet of type %d and size %d bytes\n", |
| (int)type, (int)chunk); |
| |
| if (chunk > size) { |
| lbs_deb_sdio("packet fragment (%d > %d)\n", |
| (int)chunk, (int)size); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (chunk < size) { |
| lbs_deb_sdio("packet fragment (%d < %d)\n", |
| (int)chunk, (int)size); |
| } |
| |
| switch (type) { |
| case MVMS_CMD: |
| ret = if_sdio_handle_cmd(card, card->buffer + 4, chunk - 4); |
| if (ret) |
| goto out; |
| break; |
| case MVMS_DAT: |
| ret = if_sdio_handle_data(card, card->buffer + 4, chunk - 4); |
| if (ret) |
| goto out; |
| break; |
| case MVMS_EVENT: |
| ret = if_sdio_handle_event(card, card->buffer + 4, chunk - 4); |
| if (ret) |
| goto out; |
| break; |
| default: |
| lbs_deb_sdio("invalid type (%d) from firmware\n", |
| (int)type); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| out: |
| if (ret) |
| lbs_pr_err("problem fetching packet from firmware\n"); |
| |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static void if_sdio_host_to_card_worker(struct work_struct *work) |
| { |
| struct if_sdio_card *card; |
| struct if_sdio_packet *packet; |
| unsigned long timeout; |
| u8 status; |
| int ret; |
| unsigned long flags; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| card = container_of(work, struct if_sdio_card, packet_worker); |
| |
| while (1) { |
| spin_lock_irqsave(&card->lock, flags); |
| packet = card->packets; |
| if (packet) |
| card->packets = packet->next; |
| spin_unlock_irqrestore(&card->lock, flags); |
| |
| if (!packet) |
| break; |
| |
| sdio_claim_host(card->func); |
| |
| timeout = jiffies + HZ; |
| while (1) { |
| status = sdio_readb(card->func, IF_SDIO_STATUS, &ret); |
| if (ret) |
| goto release; |
| if (status & IF_SDIO_IO_RDY) |
| break; |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto release; |
| } |
| mdelay(1); |
| } |
| |
| ret = sdio_writesb(card->func, card->ioport, |
| packet->buffer, packet->nb); |
| if (ret) |
| goto release; |
| release: |
| sdio_release_host(card->func); |
| |
| kfree(packet); |
| } |
| |
| lbs_deb_leave(LBS_DEB_SDIO); |
| } |
| |
| /********************************************************************/ |
| /* Firmware */ |
| /********************************************************************/ |
| |
| static int if_sdio_prog_helper(struct if_sdio_card *card) |
| { |
| int ret; |
| u8 status; |
| const struct firmware *fw; |
| unsigned long timeout; |
| u8 *chunk_buffer; |
| u32 chunk_size; |
| const u8 *firmware; |
| size_t size; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| ret = request_firmware(&fw, card->helper, &card->func->dev); |
| if (ret) { |
| lbs_pr_err("can't load helper firmware\n"); |
| goto out; |
| } |
| |
| chunk_buffer = kzalloc(64, GFP_KERNEL); |
| if (!chunk_buffer) { |
| ret = -ENOMEM; |
| goto release_fw; |
| } |
| |
| sdio_claim_host(card->func); |
| |
| ret = sdio_set_block_size(card->func, 32); |
| if (ret) |
| goto release; |
| |
| firmware = fw->data; |
| size = fw->size; |
| |
| while (size) { |
| timeout = jiffies + HZ; |
| while (1) { |
| status = sdio_readb(card->func, IF_SDIO_STATUS, &ret); |
| if (ret) |
| goto release; |
| if ((status & IF_SDIO_IO_RDY) && |
| (status & IF_SDIO_DL_RDY)) |
| break; |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto release; |
| } |
| mdelay(1); |
| } |
| |
| chunk_size = min(size, (size_t)60); |
| |
| *((__le32*)chunk_buffer) = cpu_to_le32(chunk_size); |
| memcpy(chunk_buffer + 4, firmware, chunk_size); |
| /* |
| lbs_deb_sdio("sending %d bytes chunk\n", chunk_size); |
| */ |
| ret = sdio_writesb(card->func, card->ioport, |
| chunk_buffer, 64); |
| if (ret) |
| goto release; |
| |
| firmware += chunk_size; |
| size -= chunk_size; |
| } |
| |
| /* an empty block marks the end of the transfer */ |
| memset(chunk_buffer, 0, 4); |
| ret = sdio_writesb(card->func, card->ioport, chunk_buffer, 64); |
| if (ret) |
| goto release; |
| |
| lbs_deb_sdio("waiting for helper to boot...\n"); |
| |
| /* wait for the helper to boot by looking at the size register */ |
| timeout = jiffies + HZ; |
| while (1) { |
| u16 req_size; |
| |
| req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret); |
| if (ret) |
| goto release; |
| |
| req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8; |
| if (ret) |
| goto release; |
| |
| if (req_size != 0) |
| break; |
| |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto release; |
| } |
| |
| msleep(10); |
| } |
| |
| ret = 0; |
| |
| release: |
| sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE); |
| sdio_release_host(card->func); |
| kfree(chunk_buffer); |
| release_fw: |
| release_firmware(fw); |
| |
| out: |
| if (ret) |
| lbs_pr_err("failed to load helper firmware\n"); |
| |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static int if_sdio_prog_real(struct if_sdio_card *card) |
| { |
| int ret; |
| u8 status; |
| const struct firmware *fw; |
| unsigned long timeout; |
| u8 *chunk_buffer; |
| u32 chunk_size; |
| const u8 *firmware; |
| size_t size, req_size; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| ret = request_firmware(&fw, card->firmware, &card->func->dev); |
| if (ret) { |
| lbs_pr_err("can't load firmware\n"); |
| goto out; |
| } |
| |
| chunk_buffer = kzalloc(512, GFP_KERNEL); |
| if (!chunk_buffer) { |
| ret = -ENOMEM; |
| goto release_fw; |
| } |
| |
| sdio_claim_host(card->func); |
| |
| ret = sdio_set_block_size(card->func, 32); |
| if (ret) |
| goto release; |
| |
| firmware = fw->data; |
| size = fw->size; |
| |
| while (size) { |
| timeout = jiffies + HZ; |
| while (1) { |
| status = sdio_readb(card->func, IF_SDIO_STATUS, &ret); |
| if (ret) |
| goto release; |
| if ((status & IF_SDIO_IO_RDY) && |
| (status & IF_SDIO_DL_RDY)) |
| break; |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto release; |
| } |
| mdelay(1); |
| } |
| |
| req_size = sdio_readb(card->func, IF_SDIO_RD_BASE, &ret); |
| if (ret) |
| goto release; |
| |
| req_size |= sdio_readb(card->func, IF_SDIO_RD_BASE + 1, &ret) << 8; |
| if (ret) |
| goto release; |
| /* |
| lbs_deb_sdio("firmware wants %d bytes\n", (int)req_size); |
| */ |
| if (req_size == 0) { |
| lbs_deb_sdio("firmware helper gave up early\n"); |
| ret = -EIO; |
| goto release; |
| } |
| |
| if (req_size & 0x01) { |
| lbs_deb_sdio("firmware helper signalled error\n"); |
| ret = -EIO; |
| goto release; |
| } |
| |
| if (req_size > size) |
| req_size = size; |
| |
| while (req_size) { |
| chunk_size = min(req_size, (size_t)512); |
| |
| memcpy(chunk_buffer, firmware, chunk_size); |
| /* |
| lbs_deb_sdio("sending %d bytes (%d bytes) chunk\n", |
| chunk_size, (chunk_size + 31) / 32 * 32); |
| */ |
| ret = sdio_writesb(card->func, card->ioport, |
| chunk_buffer, roundup(chunk_size, 32)); |
| if (ret) |
| goto release; |
| |
| firmware += chunk_size; |
| size -= chunk_size; |
| req_size -= chunk_size; |
| } |
| } |
| |
| ret = 0; |
| |
| lbs_deb_sdio("waiting for firmware to boot...\n"); |
| |
| /* wait for the firmware to boot */ |
| timeout = jiffies + HZ; |
| while (1) { |
| u16 scratch; |
| |
| scratch = if_sdio_read_scratch(card, &ret); |
| if (ret) |
| goto release; |
| |
| if (scratch == IF_SDIO_FIRMWARE_OK) |
| break; |
| |
| if (time_after(jiffies, timeout)) { |
| ret = -ETIMEDOUT; |
| goto release; |
| } |
| |
| msleep(10); |
| } |
| |
| ret = 0; |
| |
| release: |
| sdio_set_block_size(card->func, IF_SDIO_BLOCK_SIZE); |
| sdio_release_host(card->func); |
| kfree(chunk_buffer); |
| release_fw: |
| release_firmware(fw); |
| |
| out: |
| if (ret) |
| lbs_pr_err("failed to load firmware\n"); |
| |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static int if_sdio_prog_firmware(struct if_sdio_card *card) |
| { |
| int ret; |
| u16 scratch; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| sdio_claim_host(card->func); |
| scratch = if_sdio_read_scratch(card, &ret); |
| sdio_release_host(card->func); |
| |
| if (ret) |
| goto out; |
| |
| if (scratch == IF_SDIO_FIRMWARE_OK) { |
| lbs_deb_sdio("firmware already loaded\n"); |
| goto success; |
| } |
| |
| ret = if_sdio_prog_helper(card); |
| if (ret) |
| goto out; |
| |
| ret = if_sdio_prog_real(card); |
| if (ret) |
| goto out; |
| |
| success: |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| /*******************************************************************/ |
| /* Libertas callbacks */ |
| /*******************************************************************/ |
| |
| static int if_sdio_host_to_card(struct lbs_private *priv, |
| u8 type, u8 *buf, u16 nb) |
| { |
| int ret; |
| struct if_sdio_card *card; |
| struct if_sdio_packet *packet, *cur; |
| u16 size; |
| unsigned long flags; |
| |
| lbs_deb_enter_args(LBS_DEB_SDIO, "type %d, bytes %d", type, nb); |
| |
| card = priv->card; |
| |
| if (nb > (65536 - sizeof(struct if_sdio_packet) - 4)) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* |
| * The transfer must be in one transaction or the firmware |
| * goes suicidal. There's no way to guarantee that for all |
| * controllers, but we can at least try. |
| */ |
| size = sdio_align_size(card->func, nb + 4); |
| |
| packet = kzalloc(sizeof(struct if_sdio_packet) + size, |
| GFP_ATOMIC); |
| if (!packet) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| packet->next = NULL; |
| packet->nb = size; |
| |
| /* |
| * SDIO specific header. |
| */ |
| packet->buffer[0] = (nb + 4) & 0xff; |
| packet->buffer[1] = ((nb + 4) >> 8) & 0xff; |
| packet->buffer[2] = type; |
| packet->buffer[3] = 0; |
| |
| memcpy(packet->buffer + 4, buf, nb); |
| |
| spin_lock_irqsave(&card->lock, flags); |
| |
| if (!card->packets) |
| card->packets = packet; |
| else { |
| cur = card->packets; |
| while (cur->next) |
| cur = cur->next; |
| cur->next = packet; |
| } |
| |
| switch (type) { |
| case MVMS_CMD: |
| priv->dnld_sent = DNLD_CMD_SENT; |
| break; |
| case MVMS_DAT: |
| priv->dnld_sent = DNLD_DATA_SENT; |
| break; |
| default: |
| lbs_deb_sdio("unknown packet type %d\n", (int)type); |
| } |
| |
| spin_unlock_irqrestore(&card->lock, flags); |
| |
| queue_work(card->workqueue, &card->packet_worker); |
| |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| /*******************************************************************/ |
| /* SDIO callbacks */ |
| /*******************************************************************/ |
| |
| static void if_sdio_interrupt(struct sdio_func *func) |
| { |
| int ret; |
| struct if_sdio_card *card; |
| u8 cause; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| card = sdio_get_drvdata(func); |
| |
| cause = sdio_readb(card->func, IF_SDIO_H_INT_STATUS, &ret); |
| if (ret) |
| goto out; |
| |
| lbs_deb_sdio("interrupt: 0x%X\n", (unsigned)cause); |
| |
| sdio_writeb(card->func, ~cause, IF_SDIO_H_INT_STATUS, &ret); |
| if (ret) |
| goto out; |
| |
| /* |
| * Ignore the define name, this really means the card has |
| * successfully received the command. |
| */ |
| if (cause & IF_SDIO_H_INT_DNLD) |
| lbs_host_to_card_done(card->priv); |
| |
| |
| if (cause & IF_SDIO_H_INT_UPLD) { |
| ret = if_sdio_card_to_host(card); |
| if (ret) |
| goto out; |
| } |
| |
| ret = 0; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| } |
| |
| static int if_sdio_probe(struct sdio_func *func, |
| const struct sdio_device_id *id) |
| { |
| struct if_sdio_card *card; |
| struct lbs_private *priv; |
| int ret, i; |
| unsigned int model; |
| struct if_sdio_packet *packet; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| for (i = 0;i < func->card->num_info;i++) { |
| if (sscanf(func->card->info[i], |
| "802.11 SDIO ID: %x", &model) == 1) |
| break; |
| if (sscanf(func->card->info[i], |
| "ID: %x", &model) == 1) |
| break; |
| if (!strcmp(func->card->info[i], "IBIS Wireless SDIO Card")) { |
| model = 4; |
| break; |
| } |
| } |
| |
| if (i == func->card->num_info) { |
| lbs_pr_err("unable to identify card model\n"); |
| return -ENODEV; |
| } |
| |
| card = kzalloc(sizeof(struct if_sdio_card), GFP_KERNEL); |
| if (!card) |
| return -ENOMEM; |
| |
| card->func = func; |
| card->model = model; |
| spin_lock_init(&card->lock); |
| card->workqueue = create_workqueue("libertas_sdio"); |
| INIT_WORK(&card->packet_worker, if_sdio_host_to_card_worker); |
| |
| for (i = 0;i < ARRAY_SIZE(if_sdio_models);i++) { |
| if (card->model == if_sdio_models[i].model) |
| break; |
| } |
| |
| if (i == ARRAY_SIZE(if_sdio_models)) { |
| lbs_pr_err("unkown card model 0x%x\n", card->model); |
| ret = -ENODEV; |
| goto free; |
| } |
| |
| card->helper = if_sdio_models[i].helper; |
| card->firmware = if_sdio_models[i].firmware; |
| |
| if (lbs_helper_name) { |
| lbs_deb_sdio("overriding helper firmware: %s\n", |
| lbs_helper_name); |
| card->helper = lbs_helper_name; |
| } |
| |
| if (lbs_fw_name) { |
| lbs_deb_sdio("overriding firmware: %s\n", lbs_fw_name); |
| card->firmware = lbs_fw_name; |
| } |
| |
| sdio_claim_host(func); |
| |
| ret = sdio_enable_func(func); |
| if (ret) |
| goto release; |
| |
| ret = sdio_claim_irq(func, if_sdio_interrupt); |
| if (ret) |
| goto disable; |
| |
| card->ioport = sdio_readb(func, IF_SDIO_IOPORT, &ret); |
| if (ret) |
| goto release_int; |
| |
| card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 1, &ret) << 8; |
| if (ret) |
| goto release_int; |
| |
| card->ioport |= sdio_readb(func, IF_SDIO_IOPORT + 2, &ret) << 16; |
| if (ret) |
| goto release_int; |
| |
| sdio_release_host(func); |
| |
| sdio_set_drvdata(func, card); |
| |
| lbs_deb_sdio("class = 0x%X, vendor = 0x%X, " |
| "device = 0x%X, model = 0x%X, ioport = 0x%X\n", |
| func->class, func->vendor, func->device, |
| model, (unsigned)card->ioport); |
| |
| ret = if_sdio_prog_firmware(card); |
| if (ret) |
| goto reclaim; |
| |
| priv = lbs_add_card(card, &func->dev); |
| if (!priv) { |
| ret = -ENOMEM; |
| goto reclaim; |
| } |
| |
| card->priv = priv; |
| |
| priv->card = card; |
| priv->hw_host_to_card = if_sdio_host_to_card; |
| |
| priv->fw_ready = 1; |
| |
| /* |
| * Enable interrupts now that everything is set up |
| */ |
| sdio_claim_host(func); |
| sdio_writeb(func, 0x0f, IF_SDIO_H_INT_MASK, &ret); |
| sdio_release_host(func); |
| if (ret) |
| goto reclaim; |
| |
| ret = lbs_start_card(priv); |
| if (ret) |
| goto err_activate_card; |
| |
| if (priv->fwcapinfo & FW_CAPINFO_PS) |
| priv->ps_supported = 1; |
| |
| out: |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| |
| err_activate_card: |
| flush_workqueue(card->workqueue); |
| lbs_remove_card(priv); |
| reclaim: |
| sdio_claim_host(func); |
| release_int: |
| sdio_release_irq(func); |
| disable: |
| sdio_disable_func(func); |
| release: |
| sdio_release_host(func); |
| free: |
| destroy_workqueue(card->workqueue); |
| while (card->packets) { |
| packet = card->packets; |
| card->packets = card->packets->next; |
| kfree(packet); |
| } |
| |
| kfree(card); |
| |
| goto out; |
| } |
| |
| static void if_sdio_remove(struct sdio_func *func) |
| { |
| struct if_sdio_card *card; |
| struct if_sdio_packet *packet; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| card = sdio_get_drvdata(func); |
| |
| card->priv->surpriseremoved = 1; |
| |
| lbs_deb_sdio("call remove card\n"); |
| lbs_stop_card(card->priv); |
| lbs_remove_card(card->priv); |
| |
| flush_workqueue(card->workqueue); |
| destroy_workqueue(card->workqueue); |
| |
| sdio_claim_host(func); |
| sdio_release_irq(func); |
| sdio_disable_func(func); |
| sdio_release_host(func); |
| |
| while (card->packets) { |
| packet = card->packets; |
| card->packets = card->packets->next; |
| kfree(packet); |
| } |
| |
| kfree(card); |
| |
| lbs_deb_leave(LBS_DEB_SDIO); |
| } |
| |
| static struct sdio_driver if_sdio_driver = { |
| .name = "libertas_sdio", |
| .id_table = if_sdio_ids, |
| .probe = if_sdio_probe, |
| .remove = if_sdio_remove, |
| }; |
| |
| /*******************************************************************/ |
| /* Module functions */ |
| /*******************************************************************/ |
| |
| static int __init if_sdio_init_module(void) |
| { |
| int ret = 0; |
| |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n"); |
| printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n"); |
| |
| ret = sdio_register_driver(&if_sdio_driver); |
| |
| lbs_deb_leave_args(LBS_DEB_SDIO, "ret %d", ret); |
| |
| return ret; |
| } |
| |
| static void __exit if_sdio_exit_module(void) |
| { |
| lbs_deb_enter(LBS_DEB_SDIO); |
| |
| sdio_unregister_driver(&if_sdio_driver); |
| |
| lbs_deb_leave(LBS_DEB_SDIO); |
| } |
| |
| module_init(if_sdio_init_module); |
| module_exit(if_sdio_exit_module); |
| |
| MODULE_DESCRIPTION("Libertas SDIO WLAN Driver"); |
| MODULE_AUTHOR("Pierre Ossman"); |
| MODULE_LICENSE("GPL"); |