atari_NCR5380: Merge changes from NCR5380.c
In the past, atari_NCR5380.c was overlooked by those working on NCR5380.c
and this caused needless divergence. All of the changes in this patch were
taken from NCR5380.c.
This removes some unimportant discrepancies between the two core driver
forks so that 'diff' can be used to reveal the important ones, to
facilitate reunification.
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
diff --git a/drivers/scsi/atari_NCR5380.c b/drivers/scsi/atari_NCR5380.c
index b66ea63..144ae0b 100644
--- a/drivers/scsi/atari_NCR5380.c
+++ b/drivers/scsi/atari_NCR5380.c
@@ -443,22 +443,39 @@
unsigned char mask;
const char *name;
} signals[] = {
- { SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
- { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
- { SR_SEL, "SEL" }, {0, NULL}
-}, basrs[] = {
- {BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}
-}, icrs[] = {
- {ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {SR_DBP, "PARITY"},
+ {SR_RST, "RST"},
+ {SR_BSY, "BSY"},
+ {SR_REQ, "REQ"},
+ {SR_MSG, "MSG"},
+ {SR_CD, "CD"},
+ {SR_IO, "IO"},
+ {SR_SEL, "SEL"},
{0, NULL}
-}, mrs[] = {
- {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
- "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
+},
+basrs[] = {
+ {BASR_ATN, "ATN"},
+ {BASR_ACK, "ACK"},
+ {0, NULL}
+},
+icrs[] = {
+ {ICR_ASSERT_RST, "ASSERT RST"},
+ {ICR_ASSERT_ACK, "ASSERT ACK"},
+ {ICR_ASSERT_BSY, "ASSERT BSY"},
+ {ICR_ASSERT_SEL, "ASSERT SEL"},
+ {ICR_ASSERT_ATN, "ASSERT ATN"},
+ {ICR_ASSERT_DATA, "ASSERT DATA"},
+ {0, NULL}
+},
+mrs[] = {
+ {MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"},
+ {MR_TARGET, "MODE TARGET"},
+ {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"},
+ {MR_ENABLE_PAR_INTR, "MODE PARITY INTR"},
+ {MR_ENABLE_EOP_INTR, "MODE EOP INTR"},
{MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
+ {MR_DMA_MODE, "MODE DMA"},
+ {MR_ARBITRATE, "MODE ARBITRATION"},
{0, NULL}
};
@@ -502,8 +519,12 @@
unsigned char value;
const char *name;
} phases[] = {
- {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
+ {PHASE_DATAOUT, "DATAOUT"},
+ {PHASE_DATAIN, "DATAIN"},
+ {PHASE_CMDOUT, "CMDOUT"},
+ {PHASE_STATIN, "STATIN"},
+ {PHASE_MSGOUT, "MSGOUT"},
+ {PHASE_MSGIN, "MSGIN"},
{PHASE_UNKNOWN, "UNKNOWN"}
};
@@ -529,7 +550,6 @@
shost_printk(KERN_DEBUG, instance, "phase %s\n", phases[i].name);
}
}
-
#endif
/**
@@ -1488,9 +1508,9 @@
unsigned char *phase, int *count,
unsigned char **data)
{
- register unsigned char p = *phase, tmp;
- register int c = *count;
- register unsigned char *d = *data;
+ unsigned char p = *phase, tmp;
+ int c = *count;
+ unsigned char *d = *data;
/*
* The NCR5380 chip will only drive the SCSI bus when the
@@ -1557,17 +1577,17 @@
dsprintk(NDEBUG_HANDSHAKE, instance, "REQ negated, handshake complete\n");
- /*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
- *
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3. ACK and ATN are clear and the target may proceed as normal.
- */
+/*
+ * We have several special cases to consider during REQ/ACK handshaking :
+ * 1. We were in MSGOUT phase, and we are on the last byte of the
+ * message. ATN must be dropped as ACK is dropped.
+ *
+ * 2. We are in a MSGIN phase, and we are on the last byte of the
+ * message. We must exit with ACK asserted, so that the calling
+ * code may raise ATN before dropping ACK to reject the message.
+ *
+ * 3. ACK and ATN are clear and the target may proceed as normal.
+ */
if (!(p == PHASE_MSGIN && c == 1)) {
if (p == PHASE_MSGOUT && c > 1)
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
@@ -1632,7 +1652,7 @@
static int do_abort(struct Scsi_Host *instance)
{
- unsigned char tmp, *msgptr, phase;
+ unsigned char *msgptr, phase, tmp;
int len;
int rc;