ARM: OMAP2+: smc91x: generic timing calculation
Generic gpmc timing calculation helper is available now, use
it instead of custom timing calculation.
Signed-off-by: Afzal Mohammed <afzal@ti.com>
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index 6eed907..11d0b75 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -58,6 +58,7 @@
static int smc91c96_gpmc_retime(void)
{
struct gpmc_timings t;
+ struct gpmc_device_timings dev_t;
const int t3 = 10; /* Figure 12.2 read and 12.4 write */
const int t4_r = 20; /* Figure 12.2 read */
const int t4_w = 5; /* Figure 12.4 write */
@@ -68,32 +69,6 @@
const int t20 = 185; /* Figure 12.2 read and 12.4 write */
u32 l;
- memset(&t, 0, sizeof(t));
-
- /* Read timings */
- t.cs_on = 0;
- t.adv_on = t.cs_on;
- t.oe_on = t.adv_on + t3;
- t.access = t.oe_on + t5;
- t.oe_off = t.access;
- t.adv_rd_off = t.oe_off + max(t4_r, t6);
- t.cs_rd_off = t.oe_off;
- t.rd_cycle = t20 - t.oe_on;
-
- /* Write timings */
- t.we_on = t.adv_on + t3;
-
- if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
- t.wr_data_mux_bus = t.we_on;
- t.we_off = t.wr_data_mux_bus + t7;
- } else
- t.we_off = t.we_on + t7;
- if (cpu_is_omap34xx())
- t.wr_access = t.we_off;
- t.adv_wr_off = t.we_off + max(t4_w, t8);
- t.cs_wr_off = t.we_off + t4_w;
- t.wr_cycle = t20 - t.we_on;
-
l = GPMC_CONFIG1_DEVICESIZE_16;
if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
l |= GPMC_CONFIG1_MUXADDDATA;
@@ -115,6 +90,22 @@
if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
return 0;
+ memset(&dev_t, 0, sizeof(dev_t));
+
+ dev_t.t_oeasu = t3 * 1000;
+ dev_t.t_oe = t5 * 1000;
+ dev_t.t_cez_r = t4_r * 1000;
+ dev_t.t_oez = t6 * 1000;
+ dev_t.t_rd_cycle = (t20 - t3) * 1000;
+
+ dev_t.t_weasu = t3 * 1000;
+ dev_t.t_wpl = t7 * 1000;
+ dev_t.t_wph = t8 * 1000;
+ dev_t.t_cez_w = t4_w * 1000;
+ dev_t.t_wr_cycle = (t20 - t3) * 1000;
+
+ gpmc_calc_timings(&t, &dev_t);
+
return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
}